diff options
Diffstat (limited to 'gcc-4.2.1-5666.3/gcc/config.gcc')
-rw-r--r-- | gcc-4.2.1-5666.3/gcc/config.gcc | 3201 |
1 files changed, 0 insertions, 3201 deletions
diff --git a/gcc-4.2.1-5666.3/gcc/config.gcc b/gcc-4.2.1-5666.3/gcc/config.gcc deleted file mode 100644 index df57fe27d..000000000 --- a/gcc-4.2.1-5666.3/gcc/config.gcc +++ /dev/null @@ -1,3201 +0,0 @@ -# GCC target-specific configuration file. -# Copyright 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006 -# Free Software Foundation, Inc. - -#This file is part of GCC. - -#GCC is free software; you can redistribute it and/or modify it under -#the terms of the GNU General Public License as published by the Free -#Software Foundation; either version 2, or (at your option) any later -#version. - -#GCC is distributed in the hope that it will be useful, but WITHOUT -#ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -#FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -#for more details. - -#You should have received a copy of the GNU General Public License -#along with GCC; see the file COPYING. If not, write to the Free -#Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA -#02110-1301, USA. - -# This is the GCC target-specific configuration file -# where a configuration type is mapped to different system-specific -# definitions and files. This is invoked by the autoconf-generated -# configure script. Putting it in a separate shell file lets us skip -# running autoconf when modifying target-specific information. - -# This file switches on the shell variable ${target}, and also uses the -# following shell variables: -# -# with_* Various variables as set by configure. -# -# enable_threads Either the name, yes or no depending on whether -# threads support was requested. -# -# default_use_cxa_atexit -# The default value for the $enable___cxa_atexit -# variable. enable___cxa_atexit needs to be set to -# "yes" for the correct operation of C++ destructors -# but it relies upon the presence of a non-standard C -# library function called __cxa_atexit. -# Since not all C libraries provide __cxa_atexit the -# default value of $default_use_cxa_atexit is set to -# "no" except for targets which are known to be OK. -# -# gas_flag Either yes or no depending on whether GNU as was -# requested. -# -# gnu_ld_flag Either yes or no depending on whether GNU ld was -# requested. - -# This file sets the following shell variables for use by the -# autoconf-generated configure script: -# -# cpu_type The name of the cpu, if different from the first -# chunk of the canonical target name. -# -# tm_defines List of target macros to define for all compilations. -# -# tm_file A list of target macro files, if different from -# "$cpu_type/$cpu_type.h". Usually it's constructed -# per target in a way like this: -# tm_file="${tm_file} dbxelf.h elfos.h svr4.h ${cpu_type.h}/elf.h" -# Note that the preferred order is: -# - specific target header "${cpu_type}/${cpu_type.h}" -# - generic headers like dbxelf.h elfos.h, etc. -# - specializing target headers like ${cpu_type.h}/elf.h -# This helps to keep OS specific stuff out of the CPU -# defining header ${cpu_type}/${cpu_type.h}. -# -# tm_p_file Location of file with declarations for functions -# in $out_file. -# -# out_file The name of the machine description C support -# file, if different from "$cpu_type/$cpu_type.c". -# -# md_file The name of the machine-description file, if -# different from "$cpu_type/$cpu_type.md". -# -# tmake_file A list of machine-description-specific -# makefile-fragments, if different from -# "$cpu_type/t-$cpu_type". -# -# extra_modes The name of the file containing a list of extra -# machine modes, if necessary and different from -# "$cpu_type/$cpu_type-modes.def". -# -# extra_objs List of extra objects that should be linked into -# the compiler proper (cc1, cc1obj, cc1plus) -# depending on target. -# -# extra_gcc_objs List of extra objects that should be linked into -# the compiler driver (gcc) depending on target. -# -# extra_headers List of used header files from the directory -# config/${cpu_type}. -# -# extra_passes List of extra executables compiled for this target -# machine, used for compiling from source to object. -# -# extra_parts List of extra object files that should be compiled -# for this target machine. -# -# extra_programs Like extra_passes, but these are used when linking. -# -# extra_options List of target-dependent .opt files. -# -# c_target_objs List of extra target-dependent objects that be -# linked into the C compiler only. -# -# cxx_target_objs List of extra target-dependent objects that be -# linked into the C++ compiler only. -# -# target_gtfiles List of extra source files with type information. -# -# xm_defines List of macros to define when compiling for the -# target machine. -# -# xm_file List of files to include when compiling for the -# target machine. -# -# use_collect2 Set to yes or no, depending on whether collect2 -# will be used. -# -# target_cpu_default Set to override the default target model. -# -# gdb_needs_out_file_path -# Set to yes if gdb needs a dir command with -# `dirname $out_file`. -# -# thread_file Set to control which thread package to use. -# -# gas Set to yes or no depending on whether the target -# system normally uses GNU as. -# -# need_64bit_hwint Set to yes if HOST_WIDE_INT must be 64 bits wide -# for this target. This is true iff this target -# supports "long" or "wchar_t" wider than 32 bits. -# -# configure_default_options -# Set to an initializer for configure_default_options -# in configargs.h, based on --with-cpu et cetera. -# -# use_fixproto Set to "yes" if fixproto should be run normally, -# "no" if fixproto should never be run. - -# The following variables are used in each case-construct to build up the -# outgoing variables: -# -# gnu_ld Set to yes or no depending on whether the target -# system normally uses GNU ld. - -out_file= -tmake_file= -extra_headers= -extra_passes= -extra_parts= -extra_programs= -extra_objs= -extra_gcc_objs= -extra_options= -c_target_objs= -cxx_target_objs= -tm_defines= -xm_defines= -# Set this to force installation and use of collect2. -use_collect2= -# Set this to override the default target model. -target_cpu_default= -# Set this if gdb needs a dir command with `dirname $out_file` -gdb_needs_out_file_path= -# Set this to control which thread package will be used. -thread_file= -# Reinitialize these from the flag values every loop pass, since some -# configure entries modify them. -gas="$gas_flag" -gnu_ld="$gnu_ld_flag" -default_use_cxa_atexit=no -target_gtfiles= -need_64bit_hwint= - -# Default to not using fixproto. Targets which need fixproto should -# specifically set this to 'yes'. -use_fixproto=no - -# Don't carry these over build->host->target. Please. -xm_file= -md_file= - -# Obsolete configurations. -case ${target} in - c4x-* \ - | tic4x-* \ - ) - if test "x$enable_obsolete" != xyes; then - echo "*** Configuration ${target} is obsolete." >&2 - echo "*** Specify --enable-obsolete to build it anyway." >&2 - echo "*** Support will be REMOVED in the next major release of GCC," >&2 - echo "*** unless a maintainer comes forward." >&2 - exit 1 - fi;; -esac - -# Unsupported targets list. Do not put an entry in this list unless -# it would otherwise be caught by a more permissive pattern. The list -# should be in alphabetical order. -case ${target} in - alpha*-*-linux*libc1* \ - | i[34567]86-sequent-sysv \ - | i[34567]86-sequent-sysv[123]* \ - | i[34567]86-go32-* \ - | i[34567]86-*-go32* \ - | m68k-*-linux*aout* \ - | m68k-*-linux*libc1* \ - | mips64orion*-*-rtems* \ - | powerpc-*-linux*libc1* \ - | sparc-*-linux*aout* \ - | sparc-*-linux*libc1* \ - | sparc-hal-solaris2* \ - | thumb-*-* \ - | *-*-linux*coff* \ - | *-*-linux*oldld* \ - | *-*-rtemsaout* \ - | *-*-rtemscoff* \ - | vax-*-vms* \ - ) - echo "*** Configuration ${target} not supported" 1>&2 - exit 1 - ;; -esac - -# Set default cpu_type, tm_file, tm_p_file and xm_file so it can be -# updated in each machine entry. Also set default extra_headers for some -# machines. -tm_p_file= -cpu_type=`echo ${target} | sed 's/-.*$//'` -cpu_is_64bit= -case ${target} in -m32c*-*-*) - cpu_type=m32c - tmake_file=m32c/t-m32c - ;; -alpha*-*-*) - cpu_type=alpha - need_64bit_hwint=yes - ;; -am33_2.0-*-linux*) - cpu_type=mn10300 - ;; -strongarm*-*-*) - cpu_type=arm - ;; -arm*-*-*) - cpu_type=arm - # APPLE LOCAL ARM v7 support, merge from Codesourcery. - extra_headers="mmintrin.h arm_neon.h" - ;; -bfin*-*) - cpu_type=bfin - ;; -ep9312*-*-*) - cpu_type=arm - ;; -frv*) cpu_type=frv - ;; -xscale-*-*) - cpu_type=arm - extra_headers="mmintrin.h" - ;; -# APPLE LOCAL begin mainline -i[34567]86-*-*) - cpu_type=i386 - # APPLE LOCAL begin 5612787 mainline sse4 - extra_headers="mmintrin.h mm3dnow.h xmmintrin.h emmintrin.h - pmmintrin.h tmmintrin.h ammintrin.h smmintrin.h - nmmintrin.h" - # APPLE LOCAL end 5612787 mainline sse4 - ;; -x86_64-*-*) - cpu_type=i386 - # APPLE LOCAL begin 5612787 mainline sse4 - extra_headers="mmintrin.h mm3dnow.h xmmintrin.h emmintrin.h - pmmintrin.h tmmintrin.h ammintrin.h smmintrin.h - nmmintrin.h" - # APPLE LOCAL end 5612787 mainline sse4 - need_64bit_hwint=yes - ;; -# APPLE LOCAL end mainline -ia64-*-*) - extra_headers=ia64intrin.h - need_64bit_hwint=yes - ;; -hppa*-*-* | parisc*-*-*) - cpu_type=pa - ;; -m32r*-*-*) - cpu_type=m32r - ;; -m680[012]0-*-*) - cpu_type=m68k - extra_headers=math-68881.h - ;; -m68k-*-*) - extra_headers=math-68881.h - ;; -mips*-*-*) - cpu_type=mips - need_64bit_hwint=yes - ;; -powerpc*-*-*) - cpu_type=rs6000 - extra_headers="ppc-asm.h altivec.h spe.h" - need_64bit_hwint=yes - case x$with_cpu in - xpowerpc64|xdefault64|x6[23]0|x970|xG5|xpower[3456]|xrs64a) - cpu_is_64bit=yes - ;; - esac - ;; -rs6000*-*-*) - need_64bit_hwint=yes - ;; -score*-*-*) - cpu_type=score - ;; -sparc64*-*-*) - cpu_type=sparc - need_64bit_hwint=yes - ;; -sparc*-*-*) - cpu_type=sparc - ;; -s390*-*-*) - cpu_type=s390 - need_64bit_hwint=yes - ;; -# Note the 'l'; we need to be able to match e.g. "shle" or "shl". -sh[123456789lbe]*-*-*) - cpu_type=sh - need_64bit_hwint=yes - ;; -tic4x-*-*) - cpu_type=c4x - ;; -esac - -tm_file=${cpu_type}/${cpu_type}.h -if test -f ${srcdir}/config/${cpu_type}/${cpu_type}-protos.h -then - tm_p_file=${cpu_type}/${cpu_type}-protos.h -fi -extra_modes= -if test -f ${srcdir}/config/${cpu_type}/${cpu_type}-modes.def -then - extra_modes=${cpu_type}/${cpu_type}-modes.def -fi -if test -f ${srcdir}/config/${cpu_type}/${cpu_type}.opt -then - extra_options="${extra_options} ${cpu_type}/${cpu_type}.opt" -fi - -case ${target} in -x86_64-*-*) - tm_file="i386/biarch64.h ${tm_file}" - ;; -esac - -# On a.out targets, we need to use collect2. -case ${target} in -*-*-*aout*) - use_collect2=yes - ;; -esac - -# Common parts for widely ported systems. -case ${target} in -*-*-darwin*) - tm_file="${tm_file} darwin.h" - case ${target} in - *-*-darwin9*) - tm_file="${tm_file} darwin9.h" - ;; - # APPLE LOCAL begin .file/.loc 6349436 - *-*-darwin[12][0-9]*) - tm_file="${tm_file} darwin9.h darwin10.h" - ;; - # APPLE LOCAL end .file/.loc 6349436 - esac - tm_file="${tm_file} ${cpu_type}/darwin.h" - tm_p_file="${tm_p_file} darwin-protos.h" - # APPLE LOCAL 5681645 - tmake_file="t-darwin ${cpu_type}/t-darwin" - target_gtfiles="\$(srcdir)/config/darwin.c" - extra_options="${extra_options} darwin.opt" - c_target_objs="darwin-c.o" - cxx_target_objs="darwin-c.o" - extra_objs="darwin.o" - # APPLE LOCAL mainline 2007-06-14 5235474 - extra_gcc_objs="darwin-driver.o" - default_use_cxa_atexit=yes - case ${enable_threads} in - "" | yes | posix) thread_file='posix' ;; - esac - ;; -*-*-freebsd[12] | *-*-freebsd[12].* | *-*-freebsd*aout*) - # This is the place-holder for the generic a.out configuration - # of FreeBSD. No actual configuration resides here since - # there was only ever a bare-bones ix86 configuration for - # a.out and it exists solely in the machine-specific section. - # This place-holder must exist to avoid dropping into - # the generic ELF configuration of FreeBSD (i.e. it must be - # ordered before that section). - ;; -*-*-freebsd*) - # This is the generic ELF configuration of FreeBSD. Later - # machine-specific sections may refine and add to this - # configuration. - # - # Due to tm_file entry ordering issues that vary between cpu - # architectures, we only define fbsd_tm_file to allow the - # machine-specific section to dictate the final order of all - # entries of tm_file with the minor exception that components - # of the tm_file set here will always be of the form: - # - # freebsd<version_number>.h [freebsd-<conf_option>.h ...] freebsd-spec.h freebsd.h - # - # The machine-specific section should not tamper with this - # ordering but may order all other entries of tm_file as it - # pleases around the provided core setting. - gas=yes - gnu_ld=yes - extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o" - case ${target} in - *-*-freebsd3 | *-*-freebsd[3].*) - tm_defines="${tm_defines} FBSD_MAJOR=3" ;; - *-*-freebsd4 | *-*-freebsd[4].*) - tm_defines="${tm_defines} FBSD_MAJOR=4" ;; - *-*-freebsd5 | *-*-freebsd[5].*) - tm_defines="${tm_defines} FBSD_MAJOR=5" ;; - *-*-freebsd6 | *-*-freebsd[6].*) - tm_defines="${tm_defines} FBSD_MAJOR=6" ;; - *-*-freebsd7 | *-*-freebsd[7].*) - tm_defines="${tm_defines} FBSD_MAJOR=7" ;; - *-*-freebsd8 | *-*-freebsd[8].*) - tm_defines="${tm_defines} FBSD_MAJOR=8" ;; - *-*-freebsd9 | *-*-freebsd[9].*) - tm_defines="${tm_defines} FBSD_MAJOR=9" ;; - *) - echo 'Please update *-*-freebsd* in gcc/config.gcc' - exit 1 - ;; - esac - tmake_file="t-slibgcc-elf-ver t-freebsd" - case ${enable_threads} in - no) - fbsd_tm_file="${fbsd_tm_file} freebsd-nthr.h" - ;; - "" | yes | posix) - thread_file='posix' - tmake_file="${tmake_file} t-freebsd-thread" - # Before 5.0, FreeBSD can't bind shared libraries to -lc - # when "optionally" threaded via weak pthread_* checks. - case ${target} in - *-*-freebsd[34] | *-*-freebsd[34].*) - tmake_file="${tmake_file} t-slibgcc-nolc-override" - ;; - esac - ;; - *) - echo 'Unknown thread configuration for FreeBSD' - exit 1 - ;; - esac - fbsd_tm_file="${fbsd_tm_file} freebsd-spec.h freebsd.h" - ;; -*-*-linux*libc1* | *-*-linux*aout*) - # Avoid the generic linux case. - ;; -*-*-linux* | frv-*-*linux* | *-*-kfreebsd*-gnu | *-*-knetbsd*-gnu) - # Must come before *-*-gnu* (because of *-*-linux-gnu* systems). - extra_parts="crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o" - extra_options="${extra_options} linux.opt" - gas=yes - gnu_ld=yes - case ${enable_threads} in - "" | yes | posix) thread_file='posix' ;; - esac - tmake_file="t-slibgcc-elf-ver t-linux" - case ${target} in - *-*-*uclibc*) - tm_defines="${tm_defines} UCLIBC_DEFAULT=1" - ;; - *) - tm_defines="${tm_defines} UCLIBC_DEFAULT=0" - ;; - esac - # Assume that glibc or uClibc are being used and so __cxa_atexit is provided. - default_use_cxa_atexit=yes - ;; -*-*-gnu*) - # On the Hurd, the setup is just about the same on - # each different CPU. The specific machines that we - # support are matched above and just set $cpu_type. - tm_file="${cpu_type}/gnu.h" - extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o" - # GNU tools are the only tools. - gas=yes - gnu_ld=yes - # These details are the same as for Linux. - # But here we need a little extra magic. - tmake_file="t-slibgcc-elf-ver t-linux t-gnu" - case ${target} in - alpha*) - tm_file="${cpu_type}/${cpu_type}.h alpha/elf.h alpha/linux.h alpha/linux-elf.h gnu.h ${tm_file}" - ;; - i[34567]86-*-*) - tm_file="${cpu_type}/${cpu_type}.h i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h i386/linux.h gnu.h ${tm_file}" - ;; - esac - # Assume that glibc is being used and so __cxa_atexit is provided. - default_use_cxa_atexit=yes - ;; -*-*-netbsd*) - tmake_file="t-slibgcc-elf-ver t-libc-ok t-netbsd t-libgcc-pic" - gas=yes - gnu_ld=yes - - # NetBSD 2.0 and later get POSIX threads enabled by default. - # Allow them to be explicitly enabled on any other version. - case ${enable_threads} in - "") - case ${target} in - *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*) - thread_file='posix' - tm_defines="${tm_defines} NETBSD_ENABLE_PTHREADS" - ;; - esac - ;; - yes | posix) - thread_file='posix' - tm_defines="${tm_defines} NETBSD_ENABLE_PTHREADS" - ;; - esac - - # NetBSD 1.7 and later are set up to use GCC's crtstuff for - # ELF configurations. We will clear extra_parts in the - # a.out configurations. - case ${target} in - *-*-netbsd*1.[7-9]* | *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*) - extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o" - ;; - esac - - # NetBSD 2.0 and later provide __cxa_atexit(), which we use by - # default (unless overridden by --disable-__cxa_atexit). - case ${target} in - *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*) - default_use_cxa_atexit=yes - ;; - esac - ;; -*-*-openbsd*) - tmake_file="t-libc-ok t-openbsd t-libgcc-pic" - case ${enable_threads} in - yes) - thread_file='posix' - tmake_file="${tmake_file} t-openbsd-thread" - ;; - esac - case ${target} in - *-*-openbsd2.*|*-*-openbsd3.[012]) - tm_defines="${tm_defines} HAS_LIBC_R=1" ;; - esac - ;; -*-*-rtems*) - case ${enable_threads} in - yes) thread_file='rtems' ;; - esac - ;; -*-*-vxworks*) - tmake_file=t-vxworks - tm_file="${tm_file} elfos.h svr4.h" - xm_defines=POSIX - extra_options="${extra_options} vxworks.opt" - case ${enable_threads} in - no) ;; - "" | yes | vxworks) thread_file='vxworks' ;; - *) echo 'Unknown thread configuration for VxWorks'; exit 1 ;; - esac - ;; -*-*-elf) - # Assume that newlib is being used and so __cxa_atexit is provided. - default_use_cxa_atexit=yes - ;; -esac - -case ${target} in -# Support site-specific machine types. -*local*) - rest=`echo ${target} | sed -e "s/$cpu_type-//"` - tm_file=${cpu_type}/$rest.h - if test -f $srcdir/config/${cpu_type}/xm-$rest.h - then xm_file=${cpu_type}/xm-$rest.h - fi - if test -f $srcdir/config/${cpu_type}/t-$rest - then tmake_file=${cpu_type}/t-$rest - fi - ;; -alpha*-*-unicosmk*) - use_collect2=yes - tm_file="${tm_file} alpha/unicosmk.h" - - # Don't include t-ieee for now because we don't support that yet - # tmake_file="alpha/t-ieee" - tmake_file="alpha/t-unicosmk" - use_fixproto=yes - ;; -alpha*-*-linux*) - tm_file="${tm_file} alpha/elf.h alpha/linux.h alpha/linux-elf.h" - target_cpu_default="MASK_GAS" - tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee alpha/t-linux" - ;; -alpha*-*-gnu*) - target_cpu_default="MASK_GAS" - tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee" - ;; -alpha*-*-freebsd*) - tm_file="${tm_file} ${fbsd_tm_file} alpha/elf.h alpha/freebsd.h" - target_cpu_default="MASK_GAS" - tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee" - extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o" - ;; -alpha*-*-netbsd*) - tm_file="${tm_file} netbsd.h alpha/elf.h netbsd-elf.h alpha/netbsd.h" - target_cpu_default="MASK_GAS" - tmake_file="${tmake_file} alpha/t-alpha alpha/t-ieee" - ;; -alpha*-*-openbsd*) - tm_defines="${tm_defines} OBSD_NO_DYNAMIC_LIBRARIES OBSD_HAS_DECLARE_FUNCTION_NAME OBSD_HAS_DECLARE_FUNCTION_SIZE OBSD_HAS_DECLARE_OBJECT" - tm_file="alpha/alpha.h openbsd.h alpha/openbsd.h" - # default x-alpha is only appropriate for dec-osf. - target_cpu_default="MASK_GAS" - tmake_file="alpha/t-alpha alpha/t-ieee" - ;; -alpha*-dec-osf[45]*) - if test x$stabs = xyes - then - tm_file="${tm_file} dbx.h" - fi - if test x$gas != xyes - then - extra_passes="mips-tfile mips-tdump" - fi - use_collect2=yes - tmake_file="alpha/t-alpha alpha/t-ieee alpha/t-crtfm alpha/t-osf4" - tm_file="${tm_file} alpha/osf.h" - extra_headers=va_list.h - case ${target} in - *-*-osf4*) - # Define TARGET_SUPPORT_ARCH except on 4.0a. - case ${target} in - *-*-osf4.0a) ;; - *) tm_defines="${tm_defines} TARGET_SUPPORT_ARCH=1" - esac - ;; - *-*-osf5*) - tm_file="${tm_file} alpha/osf5.h" - tm_defines="${tm_defines} TARGET_SUPPORT_ARCH=1" - ;; - esac - case ${enable_threads} in - "" | yes | posix) - thread_file='posix' - tmake_file="${tmake_file} alpha/t-osf-pthread" - ;; - esac - ;; -alpha64-dec-*vms*) - tm_file="${tm_file} alpha/vms.h alpha/vms64.h" - xm_file="alpha/xm-vms.h" - tmake_file="alpha/t-alpha alpha/t-vms alpha/t-vms64 alpha/t-ieee" - prefix=/gnu - local_prefix=/gnu - ;; -alpha*-dec-*vms*) - tm_file="${tm_file} alpha/vms.h" - xm_file=alpha/xm-vms.h - tmake_file="alpha/t-alpha alpha/t-vms alpha/t-ieee" - prefix=/gnu - local_prefix=/gnu - ;; -arc-*-elf*) - tm_file="dbxelf.h elfos.h svr4.h ${tm_file}" - extra_parts="crtinit.o crtfini.o" - use_fixproto=yes - ;; -arm-*-coff* | armel-*-coff*) - tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h dbxcoff.h" - tmake_file="arm/t-arm arm/t-arm-coff" - ;; -arm-semi-aof | armel-semi-aof) - tm_file="arm/semiaof.h arm/aof.h arm/arm.h" - tmake_file="arm/t-arm arm/t-semi" - ;; -arm-wrs-vxworks) - tm_file="dbxelf.h elfos.h svr4.h vxworks.h arm/elf.h arm/aout.h arm/arm.h arm/vxworks.h" - tmake_file="${tmake_file} arm/t-arm arm/t-vxworks" - ;; -arm*-*-freebsd*|strongarm*-*-freebsd*) - tm_file="dbxelf.h elfos.h ${fbsd_tm_file} arm/elf.h arm/aout.h arm/freebsd.h arm/arm.h" - tmake_file="${tmake_file} arm/t-arm arm/t-strongarm-elf" - ;; -arm*-*-netbsdelf*) - tm_file="dbxelf.h elfos.h netbsd.h netbsd-elf.h arm/elf.h arm/aout.h arm/arm.h arm/netbsd-elf.h" - tmake_file="${tmake_file} arm/t-arm arm/t-netbsd" - ;; -arm*-*-netbsd*) - tm_file="arm/aout.h arm/arm.h netbsd.h netbsd-aout.h arm/netbsd.h" - tmake_file="t-netbsd arm/t-arm arm/t-netbsd" - extra_parts="" - use_collect2=yes - ;; -arm*-*-linux*) # ARM GNU/Linux with ELF - tm_file="dbxelf.h elfos.h linux.h arm/elf.h arm/linux-gas.h arm/linux-elf.h" - tmake_file="${tmake_file} t-linux arm/t-arm" - case ${target} in - arm*-*-linux-*eabi) - tm_file="$tm_file arm/bpabi.h arm/linux-eabi.h" - tmake_file="$tmake_file arm/t-arm-elf arm/t-bpabi arm/t-linux-eabi" - # The BPABI long long divmod functions return a 128-bit value in - # registers r0-r3. Correctly modeling that requires the use of - # TImode. - need_64bit_hwint=yes - # The EABI requires the use of __cxa_atexit. - default_use_cxa_atexit=yes - ;; - *) - tmake_file="$tmake_file arm/t-linux" - ;; - esac - tm_file="$tm_file arm/aout.h arm/arm.h" - ;; -arm*-*-uclinux*) # ARM ucLinux - tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/linux-gas.h arm/linux-elf.h arm/uclinux-elf.h" - tmake_file="arm/t-arm arm/t-arm-elf" - ;; -arm*-*-ecos-elf) - tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/ecos-elf.h" - tmake_file="arm/t-arm arm/t-arm-elf" - ;; -arm*-*-eabi* | arm*-*-symbianelf* ) - # The BPABI long long divmod functions return a 128-bit value in - # registers r0-r3. Correctly modeling that requires the use of - # TImode. - need_64bit_hwint=yes - default_use_cxa_atexit=yes - tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/bpabi.h" - tmake_file="arm/t-arm arm/t-arm-elf" - case ${target} in - arm*-*-eabi*) - tmake_file="${tmake_file} arm/t-bpabi" - ;; - arm*-*-symbianelf*) - tm_file="${tm_file} arm/symbian.h" - # We do not include t-bpabi for Symbian OS because the system - # provides its own implementation of the BPABI functions. - tmake_file="${tmake_file} arm/t-symbian" - ;; - esac - tm_file="${tm_file} arm/aout.h arm/arm.h" - ;; -arm*-*-rtems*) - tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/rtems-elf.h rtems.h" - tmake_file="arm/t-arm arm/t-arm-elf t-rtems arm/t-rtems" - ;; -arm*-*-elf | ep9312-*-elf) - tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h" - tmake_file="arm/t-arm arm/t-arm-elf" - ;; -# APPLE LOCAL begin ARM darwin target -arm*-*-darwin*) - extra_options="${extra_options} arm/darwin.opt" - tm_file="${tm_file} arm/darwin.h" - tmake_file="${tmake_file} arm/t-slibgcc-iphoneos" - extra_headers="arm_neon.h" - ;; -# APPLE LOCAL end ARM darwin target -arm*-wince-pe*) - tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h dbxcoff.h arm/pe.h arm/wince-pe.h" - tmake_file="arm/t-arm arm/t-wince-pe" - extra_options="${extra_options} arm/pe.opt" - extra_objs="pe.o" - ;; -arm-*-pe*) - tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h dbxcoff.h arm/pe.h" - tmake_file="arm/t-arm arm/t-pe" - extra_options="${extra_options} arm/pe.opt" - extra_objs="pe.o" - ;; -arm*-*-kaos*) - tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h kaos.h arm/kaos-arm.h" - tmake_file="arm/t-arm arm/t-arm-elf" - ;; -avr-*-rtems*) - tm_file="avr/avr.h dbxelf.h avr/rtems.h rtems.h" - tmake_file="avr/t-avr t-rtems avr/t-rtems" - ;; -avr-*-*) - tm_file="avr/avr.h dbxelf.h" - use_fixproto=yes - ;; -bfin*-elf*) - tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h" - tmake_file=bfin/t-bfin-elf - use_collect2=no - ;; -bfin*-uclinux*) - tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h bfin/uclinux.h" - tmake_file=bfin/t-bfin-elf - use_collect2=no - ;; -bfin*-rtems*) - tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h bfin/rtems.h rtems.h" - tmake_file="bfin/t-bfin t-rtems bfin/t-rtems" - ;; -bfin*-*) - tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h" - tmake_file=bfin/t-bfin - use_collect2=no - ;; -c4x-*-rtems* | tic4x-*-rtems*) - tmake_file="c4x/t-c4x t-rtems c4x/t-rtems" - tm_file="c4x/c4x.h c4x/rtems.h rtems.h" - c_target_objs="c4x-c.o" - cxx_target_objs="c4x-c.o" - ;; -c4x-* | tic4x-*) - tmake_file=c4x/t-c4x - c_target_objs="c4x-c.o" - cxx_target_objs="c4x-c.o" - ;; -cris-*-aout) - tm_file="dbxelf.h ${tm_file} cris/aout.h" - gas=yes - tmake_file="cris/t-cris cris/t-aout" - extra_options="${extra_options} cris/aout.opt" - ;; -cris-*-elf | cris-*-none) - tm_file="dbxelf.h elfos.h ${tm_file}" - tmake_file="cris/t-cris cris/t-elfmulti" - gas=yes - extra_options="${extra_options} cris/elf.opt" - ;; -cris-*-linux*) - tm_file="dbxelf.h elfos.h svr4.h ${tm_file} linux.h cris/linux.h" - # We need to avoid using t-linux, so override default tmake_file - tmake_file="cris/t-cris t-slibgcc-elf-ver cris/t-linux" - extra_options="${extra_options} cris/linux.opt" - ;; -crx-*-elf) - tm_file="elfos.h ${tm_file}" - extra_parts="crtbegin.o crtend.o" - use_collect2=no - ;; -fr30-*-elf) - tm_file="dbxelf.h elfos.h svr4.h ${tm_file}" - tmake_file=fr30/t-fr30 - extra_parts="crti.o crtn.o crtbegin.o crtend.o" - use_fixproto=yes - ;; -frv-*-elf) - tm_file="dbxelf.h elfos.h svr4.h ${tm_file} frv/frv-abi.h" - tmake_file=frv/t-frv - use_fixproto=yes - ;; -frv-*-*linux*) - tm_file="dbxelf.h elfos.h svr4.h ${tm_file} \ - linux.h frv/linux.h frv/frv-abi.h" - tmake_file="${tmake_file} frv/t-frv frv/t-linux" - ;; -h8300-*-rtemscoff*) - tmake_file="h8300/t-h8300 t-rtems h8300/t-rtems" - tm_file="h8300/h8300.h dbxcoff.h h8300/coff.h h8300/rtems.h rtems.h" - ;; -h8300-*-rtems*) - tmake_file="h8300/t-h8300 h8300/t-elf t-rtems h8300/t-rtems" - tm_file="h8300/h8300.h dbxelf.h elfos.h h8300/elf.h h8300/rtems.h rtems.h" - ;; -h8300-*-elf*) - tmake_file="h8300/t-h8300 h8300/t-elf" - tm_file="h8300/h8300.h dbxelf.h elfos.h h8300/elf.h" - use_fixproto=yes - ;; -h8300-*-*) - tm_file="h8300/h8300.h dbxcoff.h h8300/coff.h" - use_fixproto=yes - ;; -hppa*64*-*-linux* | parisc*64*-*-linux*) - target_cpu_default="MASK_PA_11|MASK_PA_20" - tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h svr4.h linux.h \ - pa/pa-linux.h pa/pa64-regs.h pa/pa-64.h pa/pa64-linux.h" - tmake_file="${tmake_file} pa/t-linux64" - gas=yes gnu_ld=yes - need_64bit_hwint=yes - ;; -hppa*-*-linux* | parisc*-*-linux*) - target_cpu_default="MASK_PA_11|MASK_NO_SPACE_REGS" - tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h pa/pa-linux.h \ - pa/pa32-regs.h pa/pa32-linux.h" - tmake_file="${tmake_file} pa/t-linux" - # Set the libgcc version number - if test x$sjlj = x1; then - tmake_file="$tmake_file pa/t-slibgcc-sjlj-ver" - else - tmake_file="$tmake_file pa/t-slibgcc-dwarf-ver" - fi - ;; -# port not yet contributed. -#hppa*-*-openbsd*) -# target_cpu_default="MASK_PA_11" -# ;; -hppa1.1-*-pro*) - target_cpu_default="MASK_PORTABLE_RUNTIME|MASK_NO_SPACE_REGS|MASK_SOFT_FLOAT" - tm_file="${tm_file} pa/pa32-regs.h dbxelf.h elfos.h pa/elf.h \ - pa/pa-pro-end.h libgloss.h" - tmake_file="pa/t-pro" - ;; -hppa1.1-*-osf*) - target_cpu_default="MASK_PA_11" - tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h pa/pa-osf.h" - tmake_file="pa/t-pa" - use_collect2=yes - ;; -hppa1.1-*-bsd*) - target_cpu_default="MASK_PA_11" - tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h" - tmake_file="pa/t-pa" - use_collect2=yes - ;; -hppa[12]*-*-hpux10*) - case ${target} in - hppa1.1-*-* | hppa2*-*-*) - target_cpu_default="MASK_PA_11" - ;; - esac - tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h \ - pa/pa-hpux.h pa/pa-hpux10.h" - extra_options="${extra_options} pa/pa-hpux.opt" - case ${target} in - *-*-hpux10.[1-9]*) - tm_file="${tm_file} pa/pa-hpux1010.h" - extra_options="${extra_options} pa/pa-hpux1010.opt" - ;; - esac - tmake_file="pa/t-pa-hpux10 pa/t-pa-hpux pa/t-hpux-shlib" - case ${enable_threads} in - "") - if test x$have_pthread_h = xyes ; then - tmake_file="${tmake_file} pa/t-dce-thr" - fi - ;; - yes | dce) - tmake_file="${tmake_file} pa/t-dce-thr" - ;; - esac - # Set the libgcc version number - if test x$sjlj = x1; then - tmake_file="$tmake_file pa/t-slibgcc-sjlj-ver" - else - tmake_file="$tmake_file pa/t-slibgcc-dwarf-ver" - fi - use_collect2=yes - use_fixproto=yes - gas=yes - ;; -hppa*64*-*-hpux11*) - target_cpu_default="MASK_PA_11|MASK_PA_20" - if test x$gnu_ld = xyes - then - target_cpu_default="${target_cpu_default}|MASK_GNU_LD" - fi - tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h \ - pa/pa64-regs.h pa/pa-hpux.h pa/pa-hpux1010.h \ - pa/pa-hpux11.h" - case ${target} in - *-*-hpux11.[1-9]*) - tm_file="${tm_file} pa/pa-hpux1111.h pa/pa-64.h pa/pa64-hpux.h" - extra_options="${extra_options} pa/pa-hpux1111.opt" - ;; - *) - tm_file="${tm_file} pa/pa-64.h pa/pa64-hpux.h" - ;; - esac - extra_options="${extra_options} pa/pa-hpux.opt \ - pa/pa-hpux1010.opt pa/pa64-hpux.opt" - need_64bit_hwint=yes - tmake_file="pa/t-pa64 pa/t-pa-hpux pa/t-hpux-shlib" - # Set the libgcc version number - if test x$sjlj = x1; then - tmake_file="$tmake_file pa/t-slibgcc-sjlj-ver" - else - tmake_file="$tmake_file pa/t-slibgcc-dwarf-ver" - fi - extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o \ - libgcc_stub.a" - case x${enable_threads} in - x | xyes | xposix ) - thread_file=posix - ;; - esac - gas=yes - ;; -hppa[12]*-*-hpux11*) - case ${target} in - hppa1.1-*-* | hppa2*-*-*) - target_cpu_default="MASK_PA_11" - ;; - esac - tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h \ - pa/pa-hpux.h pa/pa-hpux1010.h pa/pa-hpux11.h" - extra_options="${extra_options} pa/pa-hpux.opt pa/pa-hpux1010.opt" - case ${target} in - *-*-hpux11.[1-9]*) - tm_file="${tm_file} pa/pa-hpux1111.h" - extra_options="${extra_options} pa/pa-hpux1111.opt" - ;; - esac - tmake_file="pa/t-pa-hpux11 pa/t-pa-hpux pa/t-hpux-shlib" - # Set the libgcc version number - if test x$sjlj = x1; then - tmake_file="$tmake_file pa/t-slibgcc-sjlj-ver" - else - tmake_file="$tmake_file pa/t-slibgcc-dwarf-ver" - fi - case x${enable_threads} in - x | xyes | xposix ) - thread_file=posix - ;; - esac - use_collect2=yes - gas=yes - ;; -i[34567]86-*-darwin*) - need_64bit_hwint=yes - # APPLE LOCAL mainline - # Deleted a comment here. - # APPLE LOCAL mainline - with_cpu=${with_cpu:-core2} - # APPLE LOCAL Macintosh alignment 2002-2-19 --ff - extra_options="${extra_options} i386/darwin.opt" - # APPLE LOCAL 4099000 5681645 - tmake_file="${tmake_file} t-slibgcc-darwin i386/t-darwin" - ;; -x86_64-*-darwin*) - # APPLE LOCAL mainline - # Deleted with_arch - # APPLE LOCAL mainline - with_cpu=${with_cpu:-core2} - # APPLE LOCAL Macintosh alignment 2002-2-19 --ff - extra_options="${extra_options} i386/darwin.opt" - tmake_file="t-darwin ${cpu_type}/t-darwin64 t-slibgcc-darwin" - tm_file="${tm_file} ${cpu_type}/darwin64.h" - ;; -i[34567]86-*-elf*) - tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h" - tmake_file="i386/t-i386elf t-svr4" - use_fixproto=yes - ;; -i[34567]86-sequent-ptx4* | i[34567]86-sequent-sysv4*) - if test x$gas = xyes - then - tm_file="${tm_file} usegas.h" - fi - tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ptx4.h i386/ptx4-i.h" - tmake_file=t-svr4 - extra_parts="crtbegin.o crtend.o" - use_fixproto=yes - ;; -i[34567]86-*-aout*) - tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h i386/i386-aout.h" - use_fixproto=yes - ;; -i[34567]86-*-beoself* | i[34567]86-*-beos*) - tmake_file='i386/t-beos i386/t-crtpic' - tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/beos-elf.h" - extra_parts='crtbegin.o crtend.o' - ;; -i[34567]86-*-freebsd*) - tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${fbsd_tm_file} i386/freebsd.h" - ;; -x86_64-*-freebsd*) - tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${fbsd_tm_file} i386/x86-64.h i386/freebsd.h i386/freebsd64.h" - ;; -i[34567]86-*-netbsdelf*) - tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h netbsd.h netbsd-elf.h i386/netbsd-elf.h" - ;; -i[34567]86-*-netbsd*) - tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h netbsd.h netbsd-aout.h i386/netbsd.h" - tmake_file=t-netbsd - extra_parts="" - use_collect2=yes - ;; -x86_64-*-netbsd*) - tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h netbsd.h netbsd-elf.h i386/x86-64.h i386/netbsd64.h" - ;; -i[34567]86-*-openbsd2.*|i[34567]86-*openbsd3.[0123]) - tm_file="i386/i386.h i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h openbsd-oldgas.h openbsd.h i386/openbsd.h" - # needed to unconfuse gdb - tmake_file="t-libc-ok t-openbsd i386/t-openbsd" - # we need collect2 until our bug is fixed... - use_collect2=yes - ;; -i[34567]86-*-openbsd*) - tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h" - tm_file="${tm_file} openbsd.h i386/openbsdelf.h" - gas=yes - gnu_ld=yes - ;; -i[34567]86-*-coff*) - tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/i386-coff.h" - use_fixproto=yes - ;; -i[34567]86-*-linux* | i[34567]86-*-kfreebsd*-gnu | i[34567]86-*-knetbsd*-gnu) - # Intel 80386's running GNU/* - # with ELF format using glibc 2 - tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h i386/linux.h" - case ${target} in - i[34567]86-*-knetbsd*-gnu) tm_file="${tm_file} knetbsd-gnu.h i386/knetbsd-gnu.h" ;; - i[34567]86-*-kfreebsd*-gnu) tm_file="${tm_file} kfreebsd-gnu.h i386/kfreebsd-gnu.h" ;; - esac - tmake_file="${tmake_file} i386/t-crtstuff i386/t-crtfm t-dfprules" - ;; -x86_64-*-linux* | x86_64-*-kfreebsd*-gnu | x86_64-*-knetbsd*-gnu) - tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h \ - i386/x86-64.h i386/linux64.h" - case ${target} in - x86_64-*-kfreebsd*-gnu) tm_file="${tm_file} kfreebsd-gnu.h" ;; - x86_64-*-knetbsd*-gnu) tm_file="${tm_file} knetbsd-gnu.h" ;; - esac - tmake_file="${tmake_file} i386/t-linux64 i386/t-crtfm t-dfprules" - ;; -i[34567]86-*-gnu*) - ;; -i[34567]86-pc-msdosdjgpp*) - xm_file=i386/xm-djgpp.h - tm_file="dbxcoff.h ${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/djgpp.h" - tmake_file=i386/t-djgpp - extra_options="${extra_options} i386/djgpp.opt" - gnu_ld=yes - gas=yes - ;; -i[34567]86-*-lynxos*) - xm_defines=POSIX - tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/lynx.h lynx.h" - tmake_file="i386/t-crtstuff t-lynx" - extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o" - extra_options="${extra_options} lynx.opt" - thread_file=lynx - gnu_ld=yes - gas=yes - ;; -i[3456x]86-*-netware*) - tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h tm-dwarf2.h i386/netware.h" - tmake_file=i386/t-netware - extra_objs=netware.o - case /${with_ld} in - */nwld) - extra_objs="$extra_objs nwld.o" - tm_file="${tm_file} i386/nwld.h" - tmake_file="${tmake_file} i386/t-nwld" - extra_parts="crt0.o libgcc.def libc.def libcpre.def posixpre.def" - ;; - esac - case x${enable_threads} in - x | xyes | xposix) thread_file='posix';; - xnks) thread_file='nks';; - xno) ;; - *) echo 'Unknown thread configuration for NetWare' >&2; exit 1;; - esac - ;; -i[34567]86-*-nto-qnx*) - tm_file="${tm_file} i386/att.h dbxelf.h tm-dwarf2.h elfos.h svr4.h i386/unix.h i386/nto.h" - tmake_file=i386/t-nto - gnu_ld=yes - gas=yes - ;; -i[34567]86-*-rtems*) - tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h i386/rtemself.h rtems.h" - extra_parts="crtbegin.o crtend.o crti.o crtn.o" - tmake_file="i386/t-rtems-i386 i386/t-crtstuff t-rtems" - ;; -i[34567]86-*-sco3.2v5*) # 80386 running SCO Open Server 5 - tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/sco5.h" - if test x$gas = xyes - then - tm_file="usegas.h ${tm_file}" - fi - tmake_file=i386/t-sco5 - extra_parts="crtbegin.o crtend.o" - extra_options="${extra_options} i386/sco5.opt" - use_fixproto=yes - ;; -i[34567]86-*-solaris2*) - tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h sol2.h" - case ${target} in - *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*) - tm_file="${tm_file} sol2-6.h" - ;; - *-*-solaris2.1[0-9]*) - tm_file="${tm_file} sol2-10.h" - ;; - esac - tm_file="${tm_file} i386/sol2.h" - tmake_file="t-sol2 i386/t-sol2 t-svr4" - c_target_objs="sol2-c.o" - cxx_target_objs="sol2-c.o" - extra_objs="sol2.o" - tm_p_file="${tm_p_file} sol2-protos.h" - if test x$gnu_ld = xyes; then - tmake_file="$tmake_file t-slibgcc-elf-ver" - tm_defines="${tm_defines} TARGET_GNU_LD=1" - else - tmake_file="$tmake_file t-slibgcc-sld" - fi - if test x$gas = xyes; then - tm_file="usegas.h ${tm_file}" - fi - case ${target} in - *-*-solaris2.[789] | *-*-solaris2.1[0-9]*) - tm_file="$tm_file tm-dwarf2.h" - ;; - esac - case ${target} in - *-*-solaris2.1[0-9]*) - tm_file="${tm_file} i386/x86-64.h i386/sol2-10.h" - tm_defines="${tm_defines} TARGET_BI_ARCH=1" - tmake_file="$tmake_file i386/t-sol2-10" - need_64bit_hwint=yes - # FIXME: -m64 for i[34567]86-*-* should be allowed just - # like -m32 for x86_64-*-*. - case X"${with_cpu}" in - # APPLE LOCAL mainline - Xgeneric|Xcore2|Xnocona|Xx86-64|Xk8|Xopteron|Xathlon64|Xathlon-fx) - ;; - X) - with_cpu=generic - ;; - *) - echo "Unsupported CPU used in --with-cpu=$with_cpu, supported values:" 1>&2 - # APPLE LOCAL mainline - echo "generic core2 nocona x86-64 k8 opteron athlon64 athlon-fx" 1>&2 - exit 1 - ;; - esac - # Solaris 2.10 provides crt1.o, crti.o, crtn.o, and gcrt1.o as - # part of the base system. - extra_parts="gmon.o crtbegin.o crtend.o" - ;; - *) - extra_parts="crt1.o crti.o crtn.o gcrt1.o gmon.o crtbegin.o crtend.o" - ;; - esac - case ${enable_threads}:${have_pthread_h}:${have_thread_h} in - "":yes:* | yes:yes:* ) - case ${target} in - *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*) - thread_file=posix95 - ;; - *) - thread_file=posix - ;; - esac - ;; - "":*:yes | yes:*:yes ) - thread_file=solaris - ;; - esac - ;; -i[34567]86-*-sysv5*) # Intel x86 on System V Release 5 - tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h i386/sysv5.h" - if test x$stabs = xyes - then - tm_file="${tm_file} dbx.h" - fi - tmake_file="i386/t-crtpic t-svr4" - extra_parts="crtbegin.o crtend.o" - if test x$enable_threads = xyes; then - thread_file='posix' - fi - use_fixproto=yes - ;; -i[34567]86-*-sysv4*) # Intel 80386's running system V.4 - tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h i386/sysv4-cpp.h" - if test x$stabs = xyes - then - tm_file="${tm_file} dbx.h" - fi - tmake_file="i386/t-crtpic t-svr4" - extra_parts="crtbegin.o crtend.o" - use_fixproto=yes - ;; -i[4567]86-wrs-vxworks|i[4567]86-wrs-vxworksae) - tm_file="${tm_file} i386/sysv4.h i386/unix.h i386/att.h vx-common.h" - case ${target} in - *-vxworksae*) - tm_file="${tm_file} vxworksae.h i386/vxworksae.h" - tmake_file="${tmake_file} i386/t-vxworks i386/t-vxworksae" - ;; - *) - tm_file="${tm_file} vxworks.h i386/vxworks.h" - tmake_file="${tmake_file} i386/t-vxworks" - ;; - esac - ;; -i[34567]86-*-pe | i[34567]86-*-cygwin*) - tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h i386/cygwin.h" - xm_file=i386/xm-cygwin.h - tmake_file="i386/t-cygwin i386/t-cygming" - target_gtfiles="\$(srcdir)/config/i386/winnt.c" - extra_options="${extra_options} i386/cygming.opt" - extra_objs="winnt.o winnt-stubs.o" - c_target_objs=cygwin2.o - cxx_target_objs="cygwin2.o winnt-cxx.o" - extra_gcc_objs=cygwin1.o - if test x$enable_threads = xyes; then - thread_file='posix' - fi - ;; -i[34567]86-*-mingw32*) - tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h i386/mingw32.h" - xm_file=i386/xm-mingw32.h - tmake_file="i386/t-cygming i386/t-mingw32" - target_gtfiles="\$(srcdir)/config/i386/winnt.c" - extra_options="${extra_options} i386/cygming.opt" - extra_objs="winnt.o winnt-stubs.o" - cxx_target_objs=winnt-cxx.o - case ${enable_threads} in - "" | yes | win32) - thread_file='win32' - tmake_file="${tmake_file} i386/t-gthr-win32" - ;; - esac - case ${target} in - *mingw32crt*) - tm_file="${tm_file} i386/crtdll.h" - ;; - *mingw32msv* | *mingw32*) - ;; - esac - ;; -i[34567]86-*-uwin*) - tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygwin.h i386/uwin.h" - tmake_file="i386/t-cygwin i386/t-uwin" - extra_objs=winnt.o - extra_options="${extra_options} i386/cygming.opt" - target_gtfiles="\$(srcdir)/config/i386/winnt.c" - if test x$enable_threads = xyes; then - thread_file='win32' - fi - use_fixproto=yes - ;; -i[34567]86-*-interix3*) - tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/i386-interix.h i386/i386-interix3.h interix.h interix3.h" - tmake_file="i386/t-interix" - extra_objs=winnt.o - target_gtfiles="\$(srcdir)/config/i386/winnt.c" - if test x$enable_threads = xyes ; then - thread_file='posix' - fi - if test x$stabs = xyes ; then - tm_file="${tm_file} dbxcoff.h" - fi - ;; -i[34567]86-*-kaos*) - tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h kaos.h i386/kaos-i386.h" - tmake_file="i386/t-i386elf t-svr4" - ;; -ia64*-*-elf*) - tm_file="${tm_file} dbxelf.h elfos.h ia64/sysv4.h ia64/elf.h" - tmake_file="ia64/t-ia64" - target_cpu_default="0" - if test x$gas = xyes - then - target_cpu_default="${target_cpu_default}|MASK_GNU_AS" - fi - if test x$gnu_ld = xyes - then - target_cpu_default="${target_cpu_default}|MASK_GNU_LD" - fi - extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o" - use_fixproto=yes - ;; -ia64*-*-freebsd*) - tm_file="${tm_file} dbxelf.h elfos.h ${fbsd_tm_file} ia64/sysv4.h ia64/freebsd.h" - target_cpu_default="MASK_GNU_AS|MASK_GNU_LD" - tmake_file="${tmake_file} ia64/t-ia64" - extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o" - ;; -ia64*-*-linux*) - tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h ia64/sysv4.h ia64/linux.h" - tmake_file="${tmake_file} ia64/t-ia64 t-libunwind ia64/t-glibc" - if test x$with_system_libunwind != xyes ; then - tmake_file="${tmake_file} t-libunwind-elf ia64/t-glibc-libunwind" - fi - target_cpu_default="MASK_GNU_AS|MASK_GNU_LD" - extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o" - ;; -ia64*-*-hpux*) - tm_file="${tm_file} dbxelf.h elfos.h svr4.h ia64/sysv4.h ia64/hpux.h" - tmake_file="ia64/t-ia64 ia64/t-hpux" - target_cpu_default="MASK_GNU_AS" - case x$enable_threads in - xyes | xposix ) - thread_file=posix - ;; - esac - use_collect2=no - c_target_objs="ia64-c.o" - cxx_target_objs="ia64-c.o" - extra_options="${extra_options} ia64/ilp32.opt" - # If we decide to run fixproto we should define FIXPROTO_DEFINES - # in ia64/t-hpux, and also fix the definition of putenv in - # sys-protos.h (const char not char). - ;; -iq2000*-*-elf*) - tm_file="svr4.h elfos.h iq2000/iq2000.h" - tmake_file=iq2000/t-iq2000 - out_file=iq2000/iq2000.c - md_file=iq2000/iq2000.md - use_fixproto=yes - ;; -m32r-*-elf*) - tm_file="dbxelf.h elfos.h svr4.h ${tm_file}" - extra_parts="crtinit.o crtfini.o" - use_fixproto=yes - ;; -m32rle-*-elf*) - tm_file="dbxelf.h elfos.h svr4.h m32r/little.h ${tm_file}" - extra_parts="crtinit.o crtfini.o m32rx/crtinit.o m32rx/crtfini.o" - use_fixproto=yes - ;; -m32r-*-linux*) - tm_file="dbxelf.h elfos.h svr4.h linux.h ${tm_file} m32r/linux.h" - # We override the tmake_file for linux -- why? - tmake_file="t-slibgcc-elf-ver m32r/t-linux" - gnu_ld=yes - use_fixproto=yes - if test x$enable_threads = xyes; then - thread_file='posix' - fi - ;; -m32rle-*-linux*) - tm_file="dbxelf.h elfos.h svr4.h linux.h m32r/little.h ${tm_file} m32r/linux.h" - # We override the tmake_file for linux -- why? - tmake_file="t-slibgcc-elf-ver m32r/t-linux" - gnu_ld=yes - use_fixproto=yes - if test x$enable_threads = xyes; then - thread_file='posix' - fi - ;; -# m68hc11 and m68hc12 share the same machine description. -m68hc11-*-*|m6811-*-*) - tm_file="dbxelf.h elfos.h m68hc11/m68hc11.h" - tm_p_file="m68hc11/m68hc11-protos.h" - md_file="m68hc11/m68hc11.md" - out_file="m68hc11/m68hc11.c" - tmake_file="m68hc11/t-m68hc11-gas" - use_fixproto=yes - ;; -m68hc12-*-*|m6812-*-*) - tm_file="m68hc11/m68hc12.h dbxelf.h elfos.h m68hc11/m68hc11.h" - tm_p_file="m68hc11/m68hc11-protos.h" - md_file="m68hc11/m68hc11.md" - out_file="m68hc11/m68hc11.c" - tmake_file="m68hc11/t-m68hc11-gas" - extra_options="${extra_options} m68hc11/m68hc11.opt" - use_fixproto=yes - ;; -m68k-*-aout*) - tmake_file=m68k/t-m68kbare - tm_file="m68k/m68k.h m68k/m68k-none.h m68k/m68kemb.h m68k/m68k-aout.h libgloss.h" - ;; -m68k-*-coff*) - tmake_file=m68k/t-m68kbare - tm_defines="${tm_defines} MOTOROLA USE_GAS" - tm_file="m68k/m68k.h m68k/m68k-none.h m68k/m68kemb.h dbxcoff.h m68k/coff.h dbx.h" - use_fixproto=yes - ;; -m68020-*-elf* | m68k-*-elf*) - tm_file="m68k/m68k.h m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/m68kemb.h m68k/m68020-elf.h" - tm_defines="${tm_defines} MOTOROLA USE_GAS" - tmake_file=m68k/t-m68kelf - extra_parts="crtbegin.o crtend.o" - ;; -m68010-*-netbsdelf* | m68k*-*-netbsdelf*) - tm_file="${tm_file} dbxelf.h elfos.h netbsd.h netbsd-elf.h m68k/netbsd-elf.h" - tm_defines="${tm_defines} MOTOROLA USE_GAS" - case ${target} in - m68010*) - target_cpu_default="0" - ;; - *) - target_cpu_default="MASK_68020|MASK_68881|MASK_BITFIELD" - ;; - esac - ;; -m68k*-*-openbsd*) - # needed to unconfuse gdb - tm_defines="${tm_defines} OBSD_OLD_GAS TARGET_DEFAULT=(MASK_68020|MASK_68881|MASK_BITFIELD)" - tm_file="m68k/m68k.h openbsd.h m68k/openbsd.h" - tmake_file="t-libc-ok t-openbsd m68k/t-openbsd" - # we need collect2 until our bug is fixed... - use_collect2=yes - ;; -m68k-*-uclinux*) # Motorola m68k/ColdFire running uClinux with uClibc - tm_file="m68k/m68k.h m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/uclinux.h" - tm_defines="${tm_defines} MOTOROLA USE_GAS" - tmake_file=m68k/t-uclinux - use_fixproto=no - ;; -m68k-*-linux*) # Motorola m68k's running GNU/Linux - # with ELF format using glibc 2 - # aka the GNU/Linux C library 6. - tm_file="m68k/m68k.h dbxelf.h elfos.h svr4.h linux.h m68k/linux.h" - extra_options="${extra_options} m68k/ieee.opt" - tm_defines="${tm_defines} MOTOROLA USE_GAS" - # if not configured with --enable-sjlj-exceptions, bump the - # libgcc version number - if test x$sjlj != x1; then - tmake_file="$tmake_file m68k/t-slibgcc-elf-ver" - fi - ;; -m68k-*-rtems*) - tmake_file="m68k/t-m68kbare m68k/t-crtstuff t-rtems m68k/t-rtems" - tm_file="m68k/m68k.h m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/m68kemb.h m68k/m68020-elf.h m68k/rtemself.h rtems.h" - tm_defines="${tm_defines} MOTOROLA USE_GAS" - extra_parts="crtbegin.o crtend.o" - ;; -mcore-*-elf) - tm_file="dbxelf.h elfos.h svr4.h ${tm_file} mcore/mcore-elf.h" - tmake_file=mcore/t-mcore - use_fixproto=yes - ;; -mcore-*-pe*) - tm_file="svr3.h dbxcoff.h ${tm_file} mcore/mcore-pe.h" - tmake_file=mcore/t-mcore-pe - use_fixproto=yes - ;; -mips-sgi-irix[56]*) - tm_file="elfos.h ${tm_file} mips/iris.h" - tmake_file="mips/t-iris mips/t-slibgcc-irix" - target_cpu_default="MASK_ABICALLS" - case ${target} in - *-*-irix5*) - tm_file="${tm_file} mips/iris5.h" - ;; - - *-*-irix6*) - tm_file="${tm_file} mips/iris6.h" - tmake_file="${tmake_file} mips/t-iris6" - tm_defines="${tm_defines} MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_N32" - ;; - esac - if test "x$stabs" = xyes - then - tm_file="${tm_file} dbx.h mips/dbxmdebug.h" - fi - if test "x$gnu_ld" = xyes - then - tm_defines="${tm_defines} IRIX_USING_GNU_LD" - fi -# if test x$enable_threads = xyes; then -# thread_file='irix' -# fi - use_fixproto=yes - ;; -mips*-*-netbsd*) # NetBSD/mips, either endian. - target_cpu_default="MASK_ABICALLS" - tm_file="elfos.h ${tm_file} mips/elf.h netbsd.h netbsd-elf.h mips/netbsd.h" - ;; -mips64*-*-linux*) - tm_file="dbxelf.h elfos.h svr4.h linux.h ${tm_file} mips/linux.h mips/linux64.h" - tmake_file="${tmake_file} mips/t-linux64" - tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_N32" - gnu_ld=yes - gas=yes - ;; -mips*-*-linux*) # Linux MIPS, either endian. - tm_file="dbxelf.h elfos.h svr4.h linux.h ${tm_file} mips/linux.h" - case ${target} in - mipsisa32*-*) - target_cpu_default="MASK_SOFT_FLOAT" - tm_defines="${tm_defines} MIPS_ISA_DEFAULT=32" - ;; - esac - ;; -mips*-*-openbsd*) - tm_defines="${tm_defines} OBSD_HAS_DECLARE_FUNCTION_NAME OBSD_HAS_DECLARE_OBJECT OBSD_HAS_CORRECT_SPECS" - target_cpu_default="MASK_ABICALLS" - tm_file="mips/mips.h openbsd.h mips/openbsd.h mips/sdb.h" - case ${target} in - mips*el-*-openbsd*) - tm_defines="${tm_defines} TARGET_ENDIAN_DEFAULT=0";; - *) tm_defines="${tm_defines} TARGET_ENDIAN_DEFAULT=MASK_BIG_ENDIAN";; - esac - ;; -mipsisa32-*-elf* | mipsisa32el-*-elf*) - tm_file="elfos.h ${tm_file} mips/elf.h" - tmake_file=mips/t-isa3264 - tm_defines="${tm_defines} MIPS_ISA_DEFAULT=32 MIPS_ABI_DEFAULT=ABI_EABI" - use_fixproto=yes - ;; -mipsisa32r2-*-elf* | mipsisa32r2el-*-elf*) - tm_file="elfos.h ${tm_file} mips/elf.h" - tmake_file=mips/t-isa3264 - tm_defines="${tm_defines} MIPS_ISA_DEFAULT=33 MIPS_ABI_DEFAULT=ABI_EABI" - use_fixproto=yes - ;; -mipsisa64-*-elf* | mipsisa64el-*-elf*) - tm_file="elfos.h ${tm_file} mips/elf.h" - tmake_file=mips/t-isa3264 - target_cpu_default="MASK_64BIT|MASK_FLOAT64" - tm_defines="${tm_defines} MIPS_ISA_DEFAULT=64 MIPS_ABI_DEFAULT=ABI_EABI" - use_fixproto=yes - ;; -mipsisa64sr71k-*-elf*) - tm_file="elfos.h ${tm_file} mips/elf.h" - tmake_file=mips/t-sr71k - target_cpu_default="MASK_64BIT|MASK_FLOAT64" - tm_defines="${tm_defines} MIPS_ISA_DEFAULT=64 MIPS_CPU_STRING_DEFAULT=\\\"sr71000\\\" MIPS_ABI_DEFAULT=ABI_EABI" - use_fixproto=yes - ;; -mipsisa64sb1-*-elf* | mipsisa64sb1el-*-elf*) - tm_file="elfos.h ${tm_file} mips/elf.h" - tmake_file="mips/t-elf mips/t-sb1" - target_cpu_default="MASK_64BIT|MASK_FLOAT64" - tm_defines="${tm_defines} MIPS_ISA_DEFAULT=64 MIPS_CPU_STRING_DEFAULT=\\\"sb1\\\" MIPS_ABI_DEFAULT=ABI_O64" - use_fixproto=yes - ;; -mips-*-elf* | mipsel-*-elf*) - tm_file="elfos.h ${tm_file} mips/elf.h" - tmake_file=mips/t-elf - use_fixproto=yes - ;; -mips64-*-elf* | mips64el-*-elf*) - tm_file="elfos.h ${tm_file} mips/elf.h" - tmake_file=mips/t-elf - target_cpu_default="MASK_64BIT|MASK_FLOAT64" - tm_defines="${tm_defines} MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_O64" - use_fixproto=yes - ;; -mips64vr-*-elf* | mips64vrel-*-elf*) - tm_file="mips/vr.h elfos.h ${tm_file} mips/elf.h" - tmake_file=mips/t-vr - use_fixproto=yes - ;; -mips64orion-*-elf* | mips64orionel-*-elf*) - tm_file="elfos.h ${tm_file} mips/elforion.h mips/elf.h" - tmake_file=mips/t-elf - target_cpu_default="MASK_64BIT|MASK_FLOAT64" - tm_defines="${tm_defines} MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_O64" - use_fixproto=yes - ;; -mips*-*-rtems*) - tm_file="elfos.h ${tm_file} mips/elf.h mips/rtems.h rtems.h" - tmake_file="mips/t-elf t-rtems mips/t-rtems" - ;; -mips-wrs-vxworks) - # We want vxworks.h after mips/elf.h, which unfortunately means we - # have to redo the tm_file list from scratch. - tm_file="elfos.h mips/mips.h svr4.h mips/elf.h vxworks.h mips/vxworks.h" - tmake_file="${tmake_file} mips/t-vxworks" - ;; -mips-wrs-windiss) # Instruction-level simulator for VxWorks. - xm_defines=POSIX - tm_file="elfos.h mips/mips.h svr4.h mips/elf.h windiss.h mips/windiss.h" - tmake_file="${tmake_file} mips/t-elf" - thread_file= - ;; -mipstx39-*-elf* | mipstx39el-*-elf*) - tm_file="elfos.h ${tm_file} mips/r3900.h mips/elf.h" - tmake_file=mips/t-r3900 - use_fixproto=yes - ;; -mmix-knuth-mmixware) - need_64bit_hwint=yes - ;; -mn10300-*-*) - tm_file="dbxelf.h elfos.h svr4.h ${tm_file}" - if test x$stabs = xyes - then - tm_file="${tm_file} dbx.h" - fi - use_collect2=no - use_fixproto=yes - ;; -mt-*-elf) - tm_file="dbxelf.h elfos.h svr4.h ${tm_file}" - tmake_file="${tmake_file} mt/t-mt" - ;; -ns32k-*-netbsdelf*) - echo "GCC does not yet support the ${target} target"; exit 1 - ;; -ns32k-*-netbsd*) - tm_file="${tm_file} netbsd.h netbsd-aout.h ns32k/netbsd.h" - # On NetBSD, the headers are already okay, except for math.h. - tmake_file="t-netbsd ns32k/t-ns32k" - extra_parts="" - use_collect2=yes - ;; -pdp11-*-bsd) - tm_file="${tm_file} pdp11/2bsd.h" - use_fixproto=yes - ;; -pdp11-*-*) - use_fixproto=yes - ;; -# port not yet contributed -#powerpc-*-openbsd*) -# tmake_file="${tmake_file} rs6000/t-fprules rs6000/t-fprules-fpbit " -# extra_headers= -# ;; -powerpc64-*-linux*) - tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h" - test x$with_cpu != x || cpu_is_64bit=yes - test x$cpu_is_64bit != xyes || tm_file="${tm_file} rs6000/default64.h" - tm_file="rs6000/biarch64.h ${tm_file} rs6000/linux64.h" - if test x${enable_secureplt} = xyes; then - tm_file="rs6000/secureplt.h ${tm_file}" - fi - extra_options="${extra_options} rs6000/sysv4.opt rs6000/linux64.opt" - tmake_file="t-dfprules rs6000/t-fprules ${tmake_file} rs6000/t-ppccomm rs6000/t-linux64 rs6000/t-fprules-softfp soft-fp/t-softfp" - ;; -powerpc64-*-gnu*) - tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux64.h rs6000/gnu.h" - extra_options="${extra_options} rs6000/sysv4.opt rs6000/linux64.opt" - tmake_file="rs6000/t-fprules t-slibgcc-elf-ver t-gnu rs6000/t-linux64 rs6000/t-fprules-softfp soft-fp/t-softfp" - ;; -powerpc-*-beos*) - tm_file="${tm_file} rs6000/aix.h rs6000/beos.h rs6000/xcoff.h" - tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-beos" - extra_headers= - use_fixproto=yes - ;; -powerpc-*-darwin*) - # APPLE LOCAL ARM 5681645 - tmake_file="${tmake_file} t-slibgcc-darwin" - extra_options="${extra_options} rs6000/darwin.opt" - # APPLE LOCAL mainline candidate 2006-06-22 4512244 - extra_parts="${extra_parts} crt2.o" - case ${target} in - *-darwin1[0-9]* | *-darwin[8-9]*) - tmake_file="${tmake_file} rs6000/t-darwin8" - tm_file="${tm_file} rs6000/darwin8.h" - ;; - *-darwin7*) - tm_file="${tm_file} rs6000/darwin7.h" - ;; - *-darwin[0-6]*) - ;; - esac - extra_headers=altivec.h - ;; -powerpc64-*-darwin*) - tm_file="${tm_file} ${cpu_type}/darwin8.h ${cpu_type}/darwin64.h" - # APPLE LOCAL ARM 5681645 - tmake_file="${tmake_file} t-slibgcc-darwin" - extra_options="${extra_options} ${cpu_type}/darwin.opt" - # We're omitting t-darwin8 to avoid building any multilibs - extra_headers=altivec.h - ;; -powerpc*-*-freebsd*) - tm_file="${tm_file} dbxelf.h elfos.h ${fbsd_tm_file} rs6000/sysv4.h rs6000/freebsd.h" - tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm" - extra_options="${extra_options} rs6000/sysv4.opt" - ;; -powerpc-*-netbsd*) - tm_file="${tm_file} dbxelf.h elfos.h netbsd.h netbsd-elf.h freebsd-spec.h rs6000/sysv4.h rs6000/netbsd.h" - tmake_file="${tmake_file} rs6000/t-netbsd" - extra_options="${extra_options} rs6000/sysv4.opt" - ;; -powerpc-*-chorusos*) - tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h chorus.h" - tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcos rs6000/t-ppccomm" - extra_options="${extra_options} rs6000/sysv4.opt" - case ${enable_threads} in - yes | posix) - thread_file='posix' - ;; - esac - use_fixproto=yes - ;; -powerpc-*-eabispe*) - tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabispe.h" - extra_options="${extra_options} rs6000/sysv4.opt" - tmake_file="rs6000/t-spe rs6000/t-ppccomm" - ;; -powerpc-*-eabisimaltivec*) - tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabisim.h rs6000/eabialtivec.h" - extra_options="${extra_options} rs6000/sysv4.opt" - tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcendian rs6000/t-ppccomm" - ;; -powerpc-*-eabisim*) - tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabisim.h" - extra_options="${extra_options} rs6000/sysv4.opt" - tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm" - ;; -powerpc-*-elf*) - tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h" - extra_options="${extra_options} rs6000/sysv4.opt" - tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm" - use_fixproto=yes - ;; -powerpc-*-eabialtivec*) - tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabialtivec.h" - extra_options="${extra_options} rs6000/sysv4.opt" - tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcendian rs6000/t-ppccomm" - ;; -powerpc-*-eabi*) - tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h" - extra_options="${extra_options} rs6000/sysv4.opt" - tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm" - ;; -powerpc-*-rtems*) - tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/rtems.h rtems.h" - extra_options="${extra_options} rs6000/sysv4.opt" - tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-rtems t-rtems rs6000/t-ppccomm" - ;; -powerpc-*-linux*altivec*) - tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxaltivec.h" - extra_options="${extra_options} rs6000/sysv4.opt" - tmake_file="rs6000/t-fprules rs6000/t-fprules-softfp soft-fp/t-softfp rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm" - ;; -powerpc-*-linux*spe*) - tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxspe.h" - extra_options="${extra_options} rs6000/sysv4.opt" - tmake_file="rs6000/t-fprules rs6000/t-fprules-softfp soft-fp/t-softfp rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm" - ;; -powerpc-*-linux*) - tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h" - extra_options="${extra_options} rs6000/sysv4.opt" - tmake_file="t-dfprules rs6000/t-fprules rs6000/t-fprules-softfp soft-fp/t-softfp rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm" - case ${enable_targets}:${cpu_is_64bit} in - *powerpc64* | all:* | *:yes) - if test x$cpu_is_64bit = xyes; then - tm_file="${tm_file} rs6000/default64.h" - fi - tm_file="rs6000/biarch64.h ${tm_file} rs6000/linux64.h" - tmake_file="$tmake_file rs6000/t-linux64" - extra_options="${extra_options} rs6000/linux64.opt" - ;; - *) - tm_file="${tm_file} rs6000/linux.h" - ;; - esac - if test x${enable_secureplt} = xyes; then - tm_file="rs6000/secureplt.h ${tm_file}" - fi - ;; -powerpc-*-gnu-gnualtivec*) - tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxaltivec.h rs6000/gnu.h" - extra_options="${extra_options} rs6000/sysv4.opt" - tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcos t-slibgcc-elf-ver t-gnu rs6000/t-ppccomm" - if test x$enable_threads = xyes; then - thread_file='posix' - fi - ;; -powerpc-*-gnu*) - tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux.h rs6000/gnu.h" - tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcos t-slibgcc-elf-ver t-gnu rs6000/t-ppccomm" - extra_options="${extra_options} rs6000/sysv4.opt" - if test x$enable_threads = xyes; then - thread_file='posix' - fi - ;; -powerpc-wrs-vxworks|powerpc-wrs-vxworksae) - # We want vxworks.h after rs6000/sysv4.h, which unfortunately - # means we have to redo the tm_file list from scratch. - tm_file="rs6000/rs6000.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h" - tmake_file="${tmake_file} rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppccomm rs6000/t-vxworks" - extra_options="${extra_options} rs6000/sysv4.opt" - extra_headers=ppc-asm.h - case ${target} in - *-vxworksae*) - tm_file="${tm_file} vx-common.h vxworksae.h rs6000/vxworks.h rs6000/vxworksae.h" - tmake_file="${tmake_file} rs6000/t-vxworksae" - ;; - *-vxworks*) - tm_file="${tm_file} vx-common.h vxworks.h rs6000/vxworks.h" - ;; - esac - ;; -powerpc-wrs-windiss*) # Instruction-level simulator for VxWorks. - tm_file="${tm_file} elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/windiss.h" - tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm" - extra_options="${extra_options} rs6000/sysv4.opt" - thread_file="" - use_fixproto=yes - ;; -powerpc-*-lynxos*) - xm_defines=POSIX - tm_file="${tm_file} dbxelf.h elfos.h rs6000/sysv4.h rs6000/lynx.h lynx.h" - tmake_file="t-lynx rs6000/t-lynx" - extra_options="${extra_options} rs6000/sysv4.opt lynx.opt" - extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o" - extra_options="${extra_options} lynx.opt" - thread_file=lynx - gnu_ld=yes - gas=yes - ;; -powerpcle-*-sysv*) - tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h" - tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcos rs6000/t-ppccomm" - extra_options="${extra_options} rs6000/sysv4.opt" - use_fixproto=yes - ;; -powerpcle-*-elf*) - tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h" - tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm" - extra_options="${extra_options} rs6000/sysv4.opt" - use_fixproto=yes - ;; -powerpcle-*-eabisim*) - tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h rs6000/eabisim.h" - tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm" - extra_options="${extra_options} rs6000/sysv4.opt" - ;; -powerpcle-*-eabi*) - tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h" - tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm" - extra_options="${extra_options} rs6000/sysv4.opt" - ;; -powerpc-*-kaos*) - tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h kaos.h rs6000/kaos-ppc.h" - tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm" - extra_options="${extra_options} rs6000/sysv4.opt" - ;; -powerpcle-*-kaos*) - tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h kaos.h rs6000/kaos-ppc.h" - tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm" - extra_options="${extra_options} rs6000/sysv4.opt" - ;; -rs6000-ibm-aix4.[12]* | powerpc-ibm-aix4.[12]*) - tm_file="${tm_file} rs6000/aix.h rs6000/aix41.h rs6000/xcoff.h" - tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-newas" - extra_options="${extra_options} rs6000/aix41.opt" - use_collect2=yes - extra_headers= - use_fixproto=yes - ;; -rs6000-ibm-aix4.[3456789]* | powerpc-ibm-aix4.[3456789]*) - tm_file="rs6000/biarch64.h ${tm_file} rs6000/aix.h rs6000/aix43.h rs6000/xcoff.h" - tmake_file=rs6000/t-aix43 - extra_options="${extra_options} rs6000/aix64.opt" - use_collect2=yes - thread_file='aix' - extra_headers= - ;; -rs6000-ibm-aix5.1.* | powerpc-ibm-aix5.1.*) - tm_file="rs6000/biarch64.h ${tm_file} rs6000/aix.h rs6000/aix51.h rs6000/xcoff.h" - extra_options="${extra_options} rs6000/aix64.opt" - tmake_file=rs6000/t-aix43 - use_collect2=yes - thread_file='aix' - extra_headers= - ;; -rs6000-ibm-aix[56789].* | powerpc-ibm-aix[56789].*) - tm_file="${tm_file} rs6000/aix.h rs6000/aix52.h rs6000/xcoff.h" - tmake_file=rs6000/t-aix52 - extra_options="${extra_options} rs6000/aix64.opt" - use_collect2=yes - thread_file='aix' - extra_headers= - ;; -s390-*-linux*) - tm_file="s390/s390.h dbxelf.h elfos.h svr4.h linux.h s390/linux.h" - tmake_file="${tmake_file} t-dfprules s390/t-crtstuff s390/t-linux" - ;; -s390x-*-linux*) - tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h svr4.h linux.h s390/linux.h" - tm_p_file=s390/s390-protos.h - md_file=s390/s390.md - extra_modes=s390/s390-modes.def - out_file=s390/s390.c - tmake_file="${tmake_file} t-dfprules s390/t-crtstuff s390/t-linux s390/t-linux64" - ;; -s390x-ibm-tpf*) - tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h svr4.h s390/tpf.h" - tm_p_file=s390/s390-protos.h - md_file=s390/s390.md - extra_modes=s390/s390-modes.def - out_file=s390/s390.c - extra_parts="crtbeginS.o crtendS.o" - tmake_file="s390/t-crtstuff s390/t-tpf" - thread_file='tpf' - extra_options="${extra_options} s390/tpf.opt" - ;; -score-*-elf) - tm_file="dbxelf.h elfos.h score/elf.h score/score.h" - tmake_file=score/t-score-elf - extra_objs="score-mdaux.o" - ;; -sh-*-elf* | sh[12346l]*-*-elf* | sh*-*-kaos* | \ -sh-*-symbianelf* | sh[12346l]*-*-symbianelf* | \ - sh-*-linux* | sh[346lbe]*-*-linux* | \ - sh-*-netbsdelf* | shl*-*-netbsdelf* | sh5-*-netbsd* | sh5l*-*-netbsd* | \ - sh64-*-netbsd* | sh64l*-*-netbsd*) - tmake_file="${tmake_file} sh/t-sh sh/t-elf" - if test x${with_endian} = x; then - case ${target} in - sh[1234]*be-*-* | sh[1234]*eb-*-*) with_endian=big ;; - shbe-*-* | sheb-*-*) with_endian=big,little ;; - sh[1234]l* | sh[34]*-*-linux*) with_endian=little ;; - shl* | sh64l* | sh*-*-linux* | \ - sh5l* | sh-superh-elf) with_endian=little,big ;; - sh[1234]*-*-*) with_endian=big ;; - *) with_endian=big,little ;; - esac - fi - case ${with_endian} in - big|little) tmake_file="${tmake_file} sh/t-1e" ;; - big,little|little,big) ;; - *) echo "with_endian=${with_endian} not supported."; exit 1 ;; - esac - case ${with_endian} in - little*) tm_file="sh/little.h ${tm_file}" ;; - esac - tm_file="${tm_file} dbxelf.h elfos.h" - case ${target} in - sh*-*-netbsd*) ;; - *) tm_file="${tm_file} svr4.h" ;; - esac - tm_file="${tm_file} sh/elf.h" - case ${target} in - sh*-*-linux*) tmake_file="${tmake_file} sh/t-linux" - tm_file="${tm_file} linux.h sh/linux.h" ;; - sh*-*-kaos*) tm_file="${tm_file} sh/embed-elf.h kaos.h sh/kaos-sh.h" - ;; - sh*-*-netbsd*) tm_file="${tm_file} netbsd.h netbsd-elf.h sh/netbsd-elf.h" ;; - sh*-superh-elf) if test x$with_libgloss != xno; then - with_libgloss=yes - tm_file="${tm_file} sh/newlib.h" - fi - tm_file="${tm_file} sh/embed-elf.h" - extra_options="${extra_options} sh/superh.opt" ;; - *) if test x$with_newlib = xyes \ - && test x$with_libgloss = xyes; then - tm_file="${tm_file} sh/newlib.h" - fi - tm_file="${tm_file} sh/embed-elf.h" ;; - esac - case ${target} in - sh5*-*-netbsd*) - # SHmedia, 32-bit ABI - tmake_file="${tmake_file} sh/t-sh64 sh/t-netbsd" - ;; - sh64*-netbsd*) - # SHmedia, 64-bit ABI - tmake_file="${tmake_file} sh/t-sh64 sh/t-netbsd sh/t-netbsd-sh5-64" - ;; - *-*-netbsd) - tmake_file="${tmake_file} sh/t-netbsd" - ;; - sh64*-*-linux*) - tmake_file="${tmake_file} sh/t-sh64 sh/t-linux64" - tm_file="${tm_file} sh/sh64.h" - extra_headers="shmedia.h ushmedia.h sshmedia.h" - ;; - sh64*) - tmake_file="${tmake_file} sh/t-sh64" - tm_file="${tm_file} sh/sh64.h" - extra_headers="shmedia.h ushmedia.h sshmedia.h" - ;; - *-*-symbianelf*) - tmake_file="sh/t-symbian" - tm_file="sh/symbian-pre.h sh/little.h ${tm_file} sh/symbian-post.h" - extra_objs="symbian.o" - extra_parts="crt1.o crti.o crtn.o crtbegin.o crtend.o crtbeginS.o crtendS.o" - ;; - esac - # sed el/eb endian suffixes away to avoid confusion with sh[23]e - case `echo ${target} | sed 's/e[lb]-/-/'` in - sh64*-*-netbsd*) sh_cpu_target=sh5-64media ;; - sh64* | sh5*-*-netbsd*) sh_cpu_target=sh5-32media ;; - sh4a_single_only*) sh_cpu_target=sh4a-single-only ;; - sh4a_single*) sh_cpu_target=sh4a-single ;; - sh4a_nofpu*) sh_cpu_target=sh4a-nofpu ;; - sh4al) sh_cpu_target=sh4al ;; - sh4a*) sh_cpu_target=sh4a ;; - sh4_single_only*) sh_cpu_target=sh4-single-only ;; - sh4_single*) sh_cpu_target=sh4-single ;; - sh4_nofpu*) sh_cpu_target=sh4-nofpu ;; - sh4* | sh-superh-*) sh_cpu_target=sh4 ;; - sh3e*) sh_cpu_target=sh3e ;; - sh*-*-netbsd* | sh3*) sh_cpu_target=sh3 ;; - sh2a_single_only*) sh_cpu_target=sh2a-single-only ;; - sh2a_single*) sh_cpu_target=sh2a-single ;; - sh2a_nofpu*) sh_cpu_target=sh2a-nofpu ;; - sh2a*) sh_cpu_target=sh2a ;; - sh2e*) sh_cpu_target=sh2e ;; - sh2*) sh_cpu_target=sh2 ;; - *) sh_cpu_target=sh1 ;; - esac - # did the user say --without-fp ? - if test x$with_fp = xno; then - case ${sh_cpu_target} in - sh5-*media) sh_cpu_target=${sh_cpu_target}-nofpu ;; - sh4al | sh1) ;; - sh4a* ) sh_cpu_target=sh4a-nofpu ;; - sh4*) sh_cpu_target=sh4-nofpu ;; - sh3*) sh_cpu_target=sh3 ;; - sh2a*) sh_cpu_target=sh2a-nofpu ;; - sh2*) sh_cpu_target=sh2 ;; - *) echo --without-fp not available for $target: ignored - esac - tm_defines="$tm_defines STRICT_NOFPU=1" - fi - sh_cpu_default="`echo $with_cpu|sed s/^m/sh/|tr A-Z_ a-z-`" - case $sh_cpu_default in - sh5-64media-nofpu | sh5-64media | \ - sh5-32media-nofpu | sh5-32media | sh5-compact-nofpu | sh5-compact | \ - sh2a-single-only | sh2a-single | sh2a-nofpu | sh2a | \ - sh4a-single-only | sh4a-single | sh4a-nofpu | sh4a | sh4al | \ - sh4-single-only | sh4-single | sh4-nofpu | sh4 | \ - sh3e | sh3 | sh2e | sh2 | sh1) ;; - "") sh_cpu_default=${sh_cpu_target} ;; - *) echo "with_cpu=$with_cpu not supported"; exit 1 ;; - esac - sh_multilibs=${with_multilib_list} - if test x${sh_multilibs} = x ; then - case ${target} in - sh64-superh-linux* | \ - sh[1234]*) sh_multilibs=${sh_cpu_target} ;; - sh64* | sh5*) sh_multilibs=m5-32media,m5-32media-nofpu,m5-compact,m5-compact-nofpu,m5-64media,m5-64media-nofpu ;; - sh-superh-*) sh_multilibs=m4,m4-single,m4-single-only,m4-nofpu ;; - sh*-*-linux*) sh_multilibs=m1,m3e,m4 ;; - sh*-*-netbsd*) sh_multilibs=m3,m3e,m4 ;; - *) sh_multilibs=m1,m2,m2e,m4,m4-single,m4-single-only,m2a,m2a-single ;; - esac - if test x$with_fp = xno; then - sh_multilibs="`echo $sh_multilibs|sed -e s/m4/sh4-nofpu/ -e s/,m4-[^,]*//g -e s/,m[23]e// -e s/m2a,m2a-single/m2a-nofpu/ -e s/m5-..m....,//g`" - fi - fi - target_cpu_default=SELECT_`echo ${sh_cpu_default}|tr abcdefghijklmnopqrstuvwxyz- ABCDEFGHIJKLMNOPQRSTUVWXYZ_` - tm_defines=${tm_defines}' SH_MULTILIB_CPU_DEFAULT=\"'`echo $sh_cpu_default|sed s/sh/m/`'\"' - sh_multilibs=`echo $sh_multilibs,$sh_cpu_default | sed -e 's/[ ,/][ ,]*/ /g' -e 's/ $//' -e 's/^m/sh/' -e 's/ m/ sh/g' | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ_ abcdefghijklmnopqrstuvwxyz-` - for sh_multilib in ${sh_multilibs}; do - case ${sh_multilib} in - sh1 | sh2 | sh2e | sh3 | sh3e | \ - sh4 | sh4-single | sh4-single-only | sh4-nofpu | \ - sh4a | sh4a-single | sh4a-single-only | sh4a-nofpu | sh4al | \ - sh2a | sh2a-single | sh2a-single-only | sh2a-nofpu | \ - sh5-64media | sh5-64media-nofpu | \ - sh5-32media | sh5-32media-nofpu | \ - sh5-compact | sh5-compact-nofpu) - tmake_file="${tmake_file} sh/t-mlib-${sh_multilib}" - tm_defines="$tm_defines SUPPORT_`echo $sh_multilib|tr abcdefghijklmnopqrstuvwxyz- ABCDEFGHIJKLMNOPQRSTUVWXYZ_`=1" - ;; - *) - echo "with_multilib_list=${sh_multilib} not supported." - exit 1 - ;; - esac - done - if test x${enable_incomplete_targets} = xyes ; then - tm_defines="$tm_defines SUPPORT_SH1=1 SUPPORT_SH2E=1 SUPPORT_SH4=1 SUPPORT_SH4_SINGLE=1 SUPPORT_SH2A=1 SUPPORT_SH2A_SINGLE=1 SUPPORT_SH5_32MEDIA=1 SUPPORT_SH5_32MEDIA_NOFPU=1 SUPPORT_SH5_64MEDIA=1 SUPPORT_SH5_64MEDIA_NOFPU=1" - fi - use_fixproto=yes - ;; -sh-*-rtemscoff*) - tmake_file="sh/t-sh t-rtems sh/t-rtems" - tm_file="${tm_file} dbxcoff.h sh/coff.h sh/rtems.h rtems.h" - ;; -sh-*-rtems*) - tmake_file="sh/t-sh sh/t-elf t-rtems sh/t-rtems" - tm_file="${tm_file} dbxelf.h elfos.h svr4.h sh/elf.h sh/embed-elf.h sh/rtemself.h rtems.h" - ;; -sh-wrs-vxworks) - tmake_file="$tmake_file sh/t-sh sh/t-elf sh/t-vxworks" - tm_file="${tm_file} dbxelf.h elfos.h svr4.h sh/embed-elf.h sh/vxworks.h" - ;; -sh-*-*) - tm_file="${tm_file} dbxcoff.h sh/coff.h" - use_fixproto=yes - ;; -sparc-*-netbsdelf*) - tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h netbsd.h netbsd-elf.h sparc/netbsd-elf.h" - extra_options="${extra_options} sparc/long-double-switch.opt" - ;; -sparc64-*-openbsd*) - tm_file="sparc/openbsd1-64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sp64-elf.h openbsd.h sparc/openbsd64.h" - extra_options="${extra_options} sparc/little-endian.opt" - gas=yes gnu_ld=yes - with_cpu=ultrasparc - ;; -sparc-*-elf*) - tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sp-elf.h" - tmake_file="sparc/t-elf sparc/t-crtfm" - extra_parts="crti.o crtn.o crtbegin.o crtend.o" - use_fixproto=yes - ;; -sparc-*-linux*) # SPARC's running GNU/Linux, libc6 - tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/linux.h" - extra_options="${extra_options} sparc/long-double-switch.opt" - tmake_file="${tmake_file} sparc/t-linux sparc/t-crtfm" - ;; -sparc-*-rtems*) - tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sp-elf.h sparc/rtemself.h rtems.h" - tmake_file="sparc/t-elf sparc/t-crtfm t-rtems" - extra_parts="crti.o crtn.o crtbegin.o crtend.o" - ;; -sparc64-*-solaris2* | sparcv9-*-solaris2*) - tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h" - case ${target} in - *-*-solaris2.1[0-9]*) - tm_file="${tm_file} sol2-10.h" - ;; - esac - tm_file="${tm_file} sparc/sol2.h sparc/sol2-64.h sparc/sol2-bi.h" - if test x$gnu_ld = xyes; then - tm_file="${tm_file} sparc/sol2-gld.h sparc/sol2-gld-bi.h" - fi - if test x$gas = xyes; then - tm_file="${tm_file} sparc/sol2-gas.h sparc/sol2-gas-bi.h" - fi - tm_file="${tm_file} tm-dwarf2.h" - tmake_file="t-sol2 sparc/t-sol2 sparc/t-sol2-64 sparc/t-crtfm" - if test x$gnu_ld = xyes; then - tmake_file="$tmake_file t-slibgcc-elf-ver" - else - tmake_file="$tmake_file t-slibgcc-sld" - fi - c_target_objs="sol2-c.o" - cxx_target_objs="sol2-c.o" - extra_objs="sol2.o" - tm_p_file="${tm_p_file} sol2-protos.h" - extra_parts="crt1.o crti.o crtn.o gcrt1.o crtbegin.o crtend.o" - case ${enable_threads}:${have_pthread_h}:${have_thread_h} in - "":yes:* | yes:yes:* ) thread_file=posix ;; - "":*:yes | yes:*:yes ) thread_file=solaris ;; - esac - need_64bit_hwint=yes - ;; -sparc-*-solaris2*) - tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h" - case ${target} in - *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*) - tm_file="${tm_file} sol2-6.h" - ;; - *-*-solaris2.1[0-9]*) - tm_file="${tm_file} sol2-10.h" - ;; - esac - tm_file="${tm_file} sparc/sol2.h" - if test x$gnu_ld = xyes; then - tm_file="${tm_file} sparc/sol2-gld.h" - fi - if test x$gas = xyes; then - tm_file="${tm_file} sparc/sol2-gas.h" - fi - tmake_file="t-sol2 sparc/t-sol2 sparc/t-crtfm" - if test x$gnu_ld = xyes; then - tmake_file="$tmake_file t-slibgcc-elf-ver" - else - tmake_file="$tmake_file t-slibgcc-sld" - fi - case ${target} in - *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*) - if test x$gnu_ld = xno; then - tm_file="${tm_file} sparc/sol26-sld.h" - fi - ;; - *-*-solaris2.[789] | *-*-solaris2.1[0-9]*) - tm_file="sparc/biarch64.h ${tm_file} sparc/sol2-bi.h" - if test x$gnu_ld = xyes; then - tm_file="${tm_file} sparc/sol2-gld-bi.h" - fi - if test x$gas = xyes; then - tm_file="${tm_file} sparc/sol2-gas-bi.h" - fi - tm_file="${tm_file} tm-dwarf2.h" - tmake_file="$tmake_file sparc/t-sol2-64" - need_64bit_hwint=yes - test x$with_cpu != x || with_cpu=v9 - ;; - esac - c_target_objs="sol2-c.o" - cxx_target_objs="sol2-c.o" - extra_objs="sol2.o" - tm_p_file="${tm_p_file} sol2-protos.h" - extra_parts="crt1.o crti.o crtn.o gcrt1.o gmon.o crtbegin.o crtend.o" - case ${enable_threads}:${have_pthread_h}:${have_thread_h} in - "":yes:* | yes:yes:* ) - case ${target} in - *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*) - thread_file=posix95 - ;; - *) - thread_file=posix - ;; - esac - ;; - "":*:yes | yes:*:yes ) - thread_file=solaris - ;; - esac - ;; -sparc-*-sysv4*) - tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sysv4-only.h" - tmake_file=t-svr4 - extra_parts="crtbegin.o crtend.o" - use_fixproto=yes - ;; -sparc64-*-elf*) - tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sp64-elf.h" - extra_options="${extra_options} sparc/little-endian.opt" - tmake_file="${tmake_file} sparc/t-crtfm" - extra_parts="crtbegin.o crtend.o" - use_fixproto=yes - ;; -sparc64-*-freebsd*|ultrasparc-*-freebsd*) - tm_file="${tm_file} ${fbsd_tm_file} dbxelf.h elfos.h sparc/sysv4.h sparc/freebsd.h" - extra_options="${extra_options} sparc/long-double-switch.opt" - tmake_file="${tmake_file} sparc/t-crtfm" - case "x$with_cpu" in - xultrasparc) ;; - x) with_cpu=ultrasparc ;; - *) echo "$with_cpu not supported for freebsd target"; exit 1 ;; - esac - need_64bit_hwint=yes - ;; -sparc64-*-linux*) # 64-bit SPARC's running GNU/Linux - tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/linux64.h" - extra_options="${extra_options} sparc/long-double-switch.opt" - tmake_file="${tmake_file} sparc/t-linux sparc/t-linux64 sparc/t-crtfm" - ;; -sparc64-*-netbsd*) - tm_file="sparc/biarch64.h ${tm_file}" - tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h netbsd.h netbsd-elf.h sparc/netbsd-elf.h" - extra_options="${extra_options} sparc/long-double-switch.opt" - tmake_file="${tmake_file} sparc/t-netbsd64" - ;; -strongarm-*-elf*) - tm_file="arm/strongarm-elf.h dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h" - tmake_file="arm/t-arm arm/t-strongarm-elf" - out_file=arm/arm.c - md_file=arm/arm.md - extra_modes=arm/arm-modes.def - use_fixproto=yes - ;; -strongarm-*-pe) - tm_file="arm/semi.h arm/aout.h arm/coff.h dbxcoff.h arm/strongarm-coff.h arm/arm.h arm/pe.h arm/strongarm-pe.h" - tmake_file="arm/t-arm arm/t-strongarm-pe" - out_file=arm/arm.c - md_file=arm/arm.md - extra_modes=arm/arm-modes.def - extra_options="${extra_options} arm/pe.opt" - extra_objs=pe.o - use_fixproto=yes - ;; -strongarm-*-kaos*) - tm_file="arm/strongarm-elf.h dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h kaos.h arm/kaos-strongarm.h" - tmake_file="arm/t-arm arm/t-strongarm-elf" - out_file=arm/arm.c - md_file=arm/arm.md - extra_modes=arm/arm-modes.def - ;; -v850e1-*-*) - target_cpu_default="TARGET_CPU_v850e1" - tm_file="dbxelf.h elfos.h svr4.h v850/v850.h" - tm_p_file=v850/v850-protos.h - tmake_file=v850/t-v850e - md_file=v850/v850.md - out_file=v850/v850.c - extra_options="${extra_options} v850/v850.opt" - if test x$stabs = xyes - then - tm_file="${tm_file} dbx.h" - fi - use_collect2=no - c_target_objs="v850-c.o" - cxx_target_objs="v850-c.o" - use_fixproto=yes - ;; -v850e-*-*) - target_cpu_default="TARGET_CPU_v850e" - tm_file="dbxelf.h elfos.h svr4.h v850/v850.h" - tm_p_file=v850/v850-protos.h - tmake_file=v850/t-v850e - md_file=v850/v850.md - out_file=v850/v850.c - extra_options="${extra_options} v850/v850.opt" - if test x$stabs = xyes - then - tm_file="${tm_file} dbx.h" - fi - use_collect2=no - c_target_objs="v850-c.o" - cxx_target_objs="v850-c.o" - use_fixproto=yes - ;; -v850-*-*) - target_cpu_default="TARGET_CPU_generic" - tm_file="dbxelf.h elfos.h svr4.h ${tm_file}" - tmake_file=v850/t-v850 - if test x$stabs = xyes - then - tm_file="${tm_file} dbx.h" - fi - use_collect2=no - c_target_objs="v850-c.o" - cxx_target_objs="v850-c.o" - use_fixproto=yes - ;; -vax-*-bsd*) # VAXen running BSD - tm_file="${tm_file} vax/bsd.h" - tmake_file=vax/t-memfuncs - use_collect2=yes - use_fixproto=yes - ;; -vax-*-sysv*) # VAXen running system V - tm_file="${tm_file} vax/vaxv.h" - tmake_file=vax/t-memfuncs - use_fixproto=yes - ;; -vax-*-netbsdelf*) - tm_file="${tm_file} elfos.h netbsd.h netbsd-elf.h vax/elf.h vax/netbsd-elf.h" - ;; -vax-*-netbsd*) - tm_file="${tm_file} netbsd.h netbsd-aout.h vax/netbsd.h" - tmake_file=t-netbsd - extra_parts="" - use_collect2=yes - ;; -vax-*-openbsd*) - tm_file="vax/vax.h vax/openbsd1.h openbsd.h vax/openbsd.h" - use_collect2=yes - ;; -vax-*-ultrix*) # VAXen running ultrix - tm_file="${tm_file} vax/ultrix.h" - tmake_file=vax/t-memfuncs - use_fixproto=yes - ;; -xscale-*-elf) - tm_file="arm/xscale-elf.h dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h" - tmake_file="arm/t-arm arm/t-xscale-elf" - out_file=arm/arm.c - md_file=arm/arm.md - extra_modes=arm/arm-modes.def - use_fixproto=yes - ;; -xscale-*-coff) - tm_file="arm/semi.h arm/aout.h arm/coff.h dbxcoff.h arm/xscale-coff.h arm/arm.h" - tmake_file="arm/t-arm arm/t-xscale-coff" - out_file=arm/arm.c - md_file=arm/arm.md - extra_modes=arm/arm-modes.def - use_fixproto=yes - ;; -xstormy16-*-elf) - # For historical reasons, the target files omit the 'x'. - tm_file="dbxelf.h elfos.h svr4.h stormy16/stormy16.h" - tm_p_file=stormy16/stormy16-protos.h - md_file=stormy16/stormy16.md - out_file=stormy16/stormy16.c - extra_options=stormy16/stormy16.opt - tmake_file="stormy16/t-stormy16" - extra_parts="crtbegin.o crtend.o" - use_fixproto=yes - ;; -xtensa-*-elf*) - tm_file="${tm_file} dbxelf.h elfos.h svr4.h xtensa/elf.h" - tmake_file="xtensa/t-xtensa xtensa/t-elf" - ;; -xtensa-*-linux*) - tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h xtensa/linux.h" - tmake_file="${tmake_file} xtensa/t-xtensa xtensa/t-linux" - ;; -am33_2.0-*-linux*) - tm_file="mn10300/mn10300.h dbxelf.h elfos.h linux.h mn10300/linux.h" - tmake_file="${tmake_file} mn10300/t-linux" - gas=yes gnu_ld=yes - extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o" - use_collect2=no - ;; -m32c-*-elf*) - tm_file="dbxelf.h elfos.h svr4.h ${tm_file}" - c_target_objs="m32c-pragma.o" - cxx_target_objs="m32c-pragma.o" - use_fixproto=yes - ;; -*) - echo "*** Configuration ${target} not supported" 1>&2 - exit 1 - ;; -esac - -case ${target} in -i[34567]86-*-linux*aout* | i[34567]86-*-linux*libc1) - tmake_file="${tmake_file} i386/t-gmm_malloc" - ;; -i[34567]86-*-linux* | x86_64-*-linux*) - tmake_file="${tmake_file} i386/t-pmm_malloc" - ;; -i[34567]86-*-* | x86_64-*-*) - tmake_file="${tmake_file} i386/t-gmm_malloc" - ;; -esac - -# Support for --with-cpu and related options (and a few unrelated options, -# too). -case ${with_cpu} in - yes | no) - echo "--with-cpu must be passed a value" 1>&2 - exit 1 - ;; -esac - -# If there is no $with_cpu option, try to infer one from ${target}. -# This block sets nothing except for with_cpu. -if test x$with_cpu = x ; then - case ${target} in - ep9312-*-*) - # A Cirrus ARM variant. - with_cpu="ep9312" - ;; -# APPLE LOCAL begin mainline 2006-04-19 4434601 - i386-*-*) - with_cpu=i386 - ;; - i486-*-*) - with_cpu=i486 - ;; - i586-*-*) - case ${target_noncanonical} in - k6_2-*) - with_cpu=k6-2 - ;; - k6_3-*) - with_cpu=k6-3 - ;; - k6-*) - with_cpu=k6 - ;; - pentium_mmx-*|winchip_c6-*|winchip2-*|c3-*) - with_cpu=pentium-mmx - ;; - *) - with_cpu=pentium - ;; - esac - ;; - i686-*-* | i786-*-*) - case ${target_noncanonical} in - k8-*|opteron-*|athlon_64-*) - with_cpu=k8 - ;; - athlon_xp-*|athlon_mp-*|athlon_4-*) - with_cpu=athlon-4 - ;; - athlon_tbird-*|athlon-*) - with_cpu=athlon - ;; - pentium2-*) - with_cpu=pentium2 - ;; - pentium3-*|pentium3m-*) - with_cpu=pentium3 - ;; - pentium4-*|pentium4m-*) - with_cpu=pentium4 - ;; - prescott-*) - with_cpu=prescott - ;; - nocona-*) - with_cpu=nocona - ;; - # APPLE LOCAL begin mainline - core2-*) - with_cpu=core2 - ;; - # APPLE LOCAL end mainline - pentium_m-*) - with_cpu=pentium-m - ;; - pentiumpro-*) - with_cpu=pentiumpro - ;; - *) - with_cpu=generic - ;; - esac - ;; - x86_64-*-*) - case ${target_noncanonical} in - k8-*|opteron-*|athlon_64-*) - with_cpu=k8 - ;; - nocona-*) - with_cpu=nocona - ;; - # APPLE LOCAL begin mainline - core2-*) - with_cpu=core2 - ;; - # APPLE LOCAL end mainline - *) - with_cpu=generic - ;; - esac - ;; -# APPLE LOCAL end mainline 2006-04-19 4434601 - alphaev6[78]*-*-*) - with_cpu=ev67 - ;; - alphaev6*-*-*) - with_cpu=ev6 - ;; - alphapca56*-*-*) - with_cpu=pca56 - ;; - alphaev56*-*-*) - with_cpu=ev56 - ;; - alphaev5*-*-*) - with_cpu=ev5 - ;; - frv-*-*linux* | frv400-*-*linux*) - with_cpu=fr400 - ;; - frv550-*-*linux*) - with_cpu=fr550 - ;; - sparc*-*-*) - with_cpu="`echo ${target} | sed 's/-.*$//'`" - ;; - esac -fi - -# Similarly for --with-float -if test x$with_float = x; then - case ${target} in - ep9312-*-*) - with_float=hard - ;; - esac -fi - -# Similarly for --with-schedule. -if test x$with_schedule = x; then - case ${target} in - hppa1* | parisc1*) - # Override default PA8000 scheduling model. - with_schedule=7100LC - ;; - esac -fi - -# Validate and mark as valid any --with options supported -# by this target. In order to use a particular --with option -# you must list it in supported_defaults; validating the value -# is optional. This case statement should set nothing besides -# supported_defaults. - -supported_defaults= -case "${target}" in - alpha*-*-*) - supported_defaults="cpu tune" - for which in cpu tune; do - eval "val=\$with_$which" - case "$val" in - "" \ - | ev4 | ev45 | 21064 | ev5 | 21164 | ev56 | 21164a \ - | pca56 | 21164PC | 21164pc | ev6 | 21264 | ev67 \ - | 21264a) - ;; - *) - echo "Unknown CPU used in --with-$which=$val" 1>&2 - exit 1 - ;; - esac - done - ;; - - arm*-*-*) - supported_defaults="arch cpu float tune fpu abi mode" - for which in cpu tune; do - # See if it matches any of the entries in arm-cores.def - eval "val=\$with_$which" - if [ x"$val" = x ] \ - || grep "^ARM_CORE(\"$val\"," \ - ${srcdir}/config/arm/arm-cores.def \ - > /dev/null; then - # Ok - new_val=`grep "^ARM_CORE(\"$val\"," \ - ${srcdir}/config/arm/arm-cores.def | \ - sed -e 's/^[^,]*,[ ]*//' | \ - sed -e 's/,.*$//'` - eval "target_${which}_cname=$new_val" - echo "For $val real value is $new_val" - true - else - echo "Unknown CPU used in --with-$which=$val" 1>&2 - exit 1 - fi - done - - case "$with_arch" in - # APPLE LOCAL begin ARM v7 support. - "" \ - | armv[23456] | armv2a | armv3m | armv4t | armv5t \ - | armv5te | armv6j |armv6k | armv6z | armv6zk \ - | armv7-a \ - | iwmmxt | ep9312) - # APPLE LOCAL end ARM v7 support. - # OK - ;; - *) - echo "Unknown arch used in --with-arch=$with_arch" 1>&2 - exit 1 - ;; - esac - - case "$with_float" in - "" \ - | soft | hard | softfp) - # OK - ;; - *) - echo "Unknown floating point type used in --with-float=$with_float" 1>&2 - exit 1 - ;; - esac - - case "$with_fpu" in - # APPLE LOCAL begin ARM v7 support, merge from Codesourcery. - "" \ - | fpa | fpe2 | fpe3 | maverick | vfp | vfp3 | neon) - # APPLE LOCAL end ARM v7 support, merge from Codesourcery. - # OK - ;; - *) - echo "Unknown fpu used in --with-fpu=$with_fpu" 2>&1 - exit 1 - ;; - esac - - case "$with_abi" in - "" \ - | apcs-gnu | atpcs | aapcs | iwmmxt ) - #OK - ;; - *) - echo "Unknown ABI used in --with-abi=$with_abi" - exit 1 - ;; - esac - - case "$with_mode" in - "" \ - | arm | thumb ) - #OK - ;; - *) - echo "Unknown mode used in --with-mode=$with_mode" - exit 1 - ;; - esac - - if test "x$with_arch" != x && test "x$with_cpu" != x; then - echo "Warning: --with-arch overrides --with-cpu=$with_cpu" 1>&2 - fi - ;; - - fr*-*-*linux*) - supported_defaults=cpu - case "$with_cpu" in - fr400) ;; - fr550) ;; - *) - echo "Unknown cpu used in --with-cpu=$with_cpu" 1>&2 - exit 1 - ;; - esac - ;; - - m68k*-linux*) - supported_defaults="cpu" - case "$with_cpu" in - "" | "m68020" | "m68030" | "m68040" | "m68060" | "m68020-40" | "m68020-60") - # OK - ;; - *) - echo "Unknown CPU used in --with-cpu=$with_cpu, known values:" 1>&2 - echo "m68020 m68030 m68040 m68060 m68020-40 m68020-60" 1>&2 - exit 1 - ;; - esac - ;; - - hppa*-*-* | parisc*-*-*) - supported_defaults="arch schedule" - - case "$with_arch" in - "" | 1.0 | 1.1 | 2.0) - # OK - ;; - *) - echo "Unknown architecture used in --with-arch=$with_arch" 1>&2 - exit 1 - ;; - esac - - case "$with_schedule" in - "" | 700 | 7100 | 7100LC | 7200 | 7300 | 8000) - # OK - ;; - *) - echo "Unknown processor used in --with-schedule=$with_schedule." 1>&2 - exit 1 - ;; - esac - ;; - -# APPLE LOCAL begin mainline 2006-04-19 4434601 - i[34567]86-*-* | x86_64-*-*) - supported_defaults="arch cpu tune" - for which in arch cpu tune; do - eval "val=\$with_$which" - case ${val} in - i386 | i486 \ - | i586 | pentium | pentium-mmx | winchip-c6 | winchip2 \ - | c3 | c3-2 | i686 | pentiumpro | pentium2 | pentium3 \ - | pentium4 | k6 | k6-2 | k6-3 | athlon | athlon-tbird \ - | athlon-4 | athlon-xp | athlon-mp \ - | prescott | pentium-m | pentium4m | pentium3m) - case "${target}" in - x86_64-*-*) - echo "CPU given in --with-$which=$val doesn't support 64bit mode." 1>&2 - exit 1 - ;; - esac - # OK - ;; -# APPLE LOCAL mainline - "" | k8 | opteron | athlon64 | athlon-fx | nocona | core2 \ - | generic) - # OK - ;; -# APPLE LOCAL end mainline 2006-04-19 4434601 - *) - echo "Unknown CPU given in --with-$which=$val." 1>&2 - exit 1 - ;; - esac - done - ;; - - mips*-*-*) - supported_defaults="abi arch float tune divide" - - case ${with_float} in - "" | soft | hard) - # OK - ;; - *) - echo "Unknown floating point type used in --with-float=$with_float" 1>&2 - exit 1 - ;; - esac - - case ${with_abi} in - "" | 32 | o64 | n32 | 64 | eabi) - # OK - ;; - *) - echo "Unknown ABI used in --with-abi=$with_abi" 1>&2 - exit 1 - ;; - esac - - case ${with_divide} in - "" | breaks | traps) - # OK - ;; - *) - echo "Unknown division check type use in --with-divide=$with_divide" 1>&2 - exit 1 - esac - ;; - - mt-*-*) - supported_defaults="arch" - - case "$with_arch" in - "" \ - | ms1-64-001 \ - | ms1-16-002 \ - | ms1-16-003 \ - | ms2 \ - | "") - # OK - ;; - *) - echo "Unknown arch used in --with-arch=$with_arch" 1>&2 - exit 1 - ;; - esac - ;; - - powerpc*-*-* | rs6000-*-*) - supported_defaults="cpu float tune" - - for which in cpu tune; do - eval "val=\$with_$which" - case ${val} in - default32 | default64) - with_which="with_$which" - eval $with_which= - ;; - 405cr) - tm_defines="${tm_defines} CONFIG_PPC405CR" - eval "with_$which=405" - ;; - "" | common \ - | power | power[23456] | powerpc | powerpc64 \ - | rios | rios1 | rios2 | rsc | rsc1 | rs64a \ - | 401 | 403 | 405 | 405fp | 440 | 440fp | 505 \ - | 601 | 602 | 603 | 603e | ec603e | 604 \ - | 604e | 620 | 630 | 740 | 750 | 7400 | 7450 \ - | 854[08] | 801 | 821 | 823 | 860 | 970 | G3 | G4 | G5) - # OK - ;; - *) - echo "Unknown cpu used in --with-$which=$val." 1>&2 - exit 1 - ;; - esac - done - ;; - - s390*-*-*) - supported_defaults="arch mode tune" - - for which in arch tune; do - eval "val=\$with_$which" - case ${val} in - "" | g5 | g6 | z900 | z990 | z9-109) - # OK - ;; - *) - echo "Unknown cpu used in --with-$which=$val." 1>&2 - exit 1 - ;; - esac - done - - case ${with_mode} in - "" | esa | zarch) - # OK - ;; - *) - echo "Unknown architecture mode used in --with-mode=$with_mode." 1>&2 - exit 1 - ;; - esac - ;; - - sh[123456ble]-*-* | sh-*-*) - supported_defaults="cpu" - case "`echo $with_cpu | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ_ abcdefghijklmnopqrstuvwxyz- | sed s/sh/m/`" in - "" | m1 | m2 | m2e | m3 | m3e | m4 | m4-single | m4-single-only | m4-nofpu ) - # OK - ;; - m2a | m2a-single | m2a-single-only | m2a-nofpu) - ;; - m4a | m4a-single | m4a-single-only | m4a-nofpu | m4al) - ;; - *) - echo "Unknown CPU used in --with-cpu=$with_cpu, known values:" 1>&2 - echo "m1 m2 m2e m3 m3e m4 m4-single m4-single-only m4-nofpu" 1>&2 - echo "m4a m4a-single m4a-single-only m4a-nofpu m4al" 1>&2 - echo "m2a m2a-single m2a-single-only m2a-nofpu" 1>&2 - exit 1 - ;; - esac - ;; - sparc*-*-*) - supported_defaults="cpu float tune" - - for which in cpu tune; do - eval "val=\$with_$which" - case ${val} in - "" | sparc | sparcv9 | sparc64 | sparc86x \ - | v7 | cypress | v8 | supersparc | sparclite | f930 \ - | f934 | hypersparc | sparclite86x | sparclet | tsc701 \ - | v9 | ultrasparc | ultrasparc3 | niagara) - # OK - ;; - *) - echo "Unknown cpu used in --with-$which=$val" 1>&2 - exit 1 - ;; - esac - done - - case ${with_float} in - "" | soft | hard) - # OK - ;; - *) - echo "Unknown floating point type used in --with-float=$with_float" 1>&2 - exit 1 - ;; - esac - ;; - - v850*-*-*) - supported_defaults=cpu - case ${with_cpu} in - "" | v850e | v850e1) - # OK - ;; - *) - echo "Unknown cpu used in --with-cpu=$with_cpu" 1>&2 - exit 1 - ;; - esac - ;; -esac - -# Set some miscellaneous flags for particular targets. -target_cpu_default2= -case ${target} in - alpha*-*-*) - if test x$gas = xyes - then - target_cpu_default2="MASK_GAS" - fi - ;; - - arm*-*-*) - if test x$target_cpu_cname = x - then - target_cpu_default2=TARGET_CPU_generic - else - target_cpu_default2=TARGET_CPU_$target_cpu_cname - fi - ;; - - m68k*-linux*) - case "x$with_cpu" in - x) - # The most generic - target_cpu_default2="(MASK_68020|MASK_68881|MASK_BITFIELD)" - ;; - xm68020) - target_cpu_default2="(MASK_68020|MASK_68881|MASK_BITFIELD)" - ;; - xm68030) - target_cpu_default2="(MASK_68030|MASK_68020|MASK_68881|MASK_BITFIELD)" - ;; - xm68040) - target_cpu_default2="(MASK_68040|MASK_68040_ONLY|MASK_68020|MASK_68881|MASK_BITFIELD)" - ;; - xm68060) - target_cpu_default2="(MASK_68060|MASK_68040_ONLY|MASK_68020|MASK_68881|MASK_BITFIELD)" - ;; - xm68020-40) - target_cpu_default2="(MASK_BITFIELD|MASK_68881|MASK_68020|MASK_68040)" - ;; - xm68020-60) - target_cpu_default2="(MASK_BITFIELD|MASK_68881|MASK_68020|MASK_68040|MASK_68060)" - ;; - *) - echo "Unknown CPU used in --with-cpu=$with_cpu" 1>&2 - exit 1 - ;; - esac - ;; - - hppa*-*-* | parisc*-*-*) - target_cpu_default2="MASK_BIG_SWITCH" - if test x$gas = xyes - then - target_cpu_default2="${target_cpu_default2}|MASK_GAS|MASK_JUMP_IN_DELAY" - fi - ;; - - mips*-*-*) - if test x$gnu_ld = xyes - then - target_cpu_default2="MASK_SPLIT_ADDRESSES" - fi - case ${target} in - mips*el-*-*) - tm_defines="TARGET_ENDIAN_DEFAULT=0 $tm_defines" - ;; - esac - if test "x$enable_gofast" = xyes - then - tm_defines="US_SOFTWARE_GOFAST $tm_defines" - tmake_file="mips/t-gofast $tmake_file" - else - tmake_file="mips/t-mips $tmake_file" - fi - ;; - - powerpc*-*-* | rs6000-*-*) - # FIXME: The PowerPC port uses the value set at compile time, - # although it's only cosmetic. - if test "x$with_cpu" != x - then - target_cpu_default2="\\\"$with_cpu\\\"" - fi - out_file=rs6000/rs6000.c - c_target_objs="${c_target_objs} rs6000-c.o" - cxx_target_objs="${cxx_target_objs} rs6000-c.o" - tmake_file="rs6000/t-rs6000 ${tmake_file}" - - if test x$enable_e500_double = xyes - then - tm_file="$tm_file rs6000/e500-double.h" - fi - ;; - - sh[123456ble]*-*-* | sh-*-*) - c_target_objs="${c_target_objs} sh-c.o" - cxx_target_objs="${cxx_target_objs} sh-c.o" - ;; - - sparc*-*-*) - # Some standard aliases. - case x$with_cpu in - xsparc) - with_cpu=v7 - ;; - xsparcv9 | xsparc64) - with_cpu=v9 - ;; - esac - - # The SPARC port checks this value at compile-time. - target_cpu_default2="TARGET_CPU_$with_cpu" - ;; - v850*-*-*) - # FIXME: The v850 is "special" in that it does not support - # runtime CPU selection, only --with-cpu. - case "x$with_cpu" in - x) - ;; - xv850e) - target_cpu_default2="TARGET_CPU_$with_cpu" - ;; - esac - ;; -esac - -t= -all_defaults="abi cpu arch tune schedule float mode fpu divide" -for option in $all_defaults -do - eval "val=\$with_$option" - if test -n "$val"; then - case " $supported_defaults " in - *" $option "*) - ;; - *) - echo "This target does not support --with-$option." 2>&1 - echo "Valid --with options are: $supported_defaults" 2>&1 - exit 1 - ;; - esac - - if test "x$t" = x - then - t="{ \"$option\", \"$val\" }" - else - t="${t}, { \"$option\", \"$val\" }" - fi - fi -done - -if test "x$t" = x -then - configure_default_options="{ { NULL, NULL} }" -else - configure_default_options="{ ${t} }" -fi - -if test "$target_cpu_default2" != "" -then - if test "$target_cpu_default" != "" - then - target_cpu_default="(${target_cpu_default}|${target_cpu_default2})" - else - target_cpu_default=$target_cpu_default2 - fi -fi |