diff options
Diffstat (limited to 'binutils-2.25/include/aout/adobe.h')
| -rw-r--r-- | binutils-2.25/include/aout/adobe.h | 314 |
1 files changed, 314 insertions, 0 deletions
diff --git a/binutils-2.25/include/aout/adobe.h b/binutils-2.25/include/aout/adobe.h new file mode 100644 index 00000000..ce225527 --- /dev/null +++ b/binutils-2.25/include/aout/adobe.h @@ -0,0 +1,314 @@ +/* `a.out.adobe' differences from standard a.out files + + Copyright 2001, 2010 Free Software Foundation, Inc. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, + MA 02110-1301, USA. */ + +#ifndef __A_OUT_ADOBE_H__ +#define __A_OUT_ADOBE_H__ + +#define BYTES_IN_WORD 4 + +/* Struct external_exec is the same. */ + +/* This is the layout on disk of the 32-bit or 64-bit exec header. */ + +struct external_exec +{ + bfd_byte e_info[4]; /* magic number and stuff */ + bfd_byte e_text[BYTES_IN_WORD]; /* length of text section in bytes */ + bfd_byte e_data[BYTES_IN_WORD]; /* length of data section in bytes */ + bfd_byte e_bss[BYTES_IN_WORD]; /* length of bss area in bytes */ + bfd_byte e_syms[BYTES_IN_WORD]; /* length of symbol table in bytes */ + bfd_byte e_entry[BYTES_IN_WORD]; /* start address */ + bfd_byte e_trsize[BYTES_IN_WORD]; /* length of text relocation info */ + bfd_byte e_drsize[BYTES_IN_WORD]; /* length of data relocation info */ +}; + +#define EXEC_BYTES_SIZE (4 + BYTES_IN_WORD * 7) + +/* Magic numbers for a.out files */ + +#undef ZMAGIC +#define ZMAGIC 0xAD0BE /* Cute, eh? */ +#undef OMAGIC +#undef NMAGIC + +#define N_BADMAG(x) ((x).a_info != ZMAGIC) + +/* By default, segment size is constant. But some machines override this + to be a function of the a.out header (e.g. machine type). */ +#ifndef N_SEGSIZE +#define N_SEGSIZE(x) SEGMENT_SIZE +#endif +#undef N_SEGSIZE /* FIXMEXXXX */ + +/* Segment information for the a.out.Adobe format is specified after the + file header. It contains N segment descriptors, followed by one with + a type of zero. + + The actual text of the segments starts at N_TXTOFF in the file, + regardless of how many or how few segment headers there are. */ + +struct external_segdesc { + unsigned char e_type[1]; + unsigned char e_size[3]; + unsigned char e_virtbase[4]; + unsigned char e_filebase[4]; +}; + +struct internal_segdesc { + unsigned int a_type:8; /* Segment type N_TEXT, N_DATA, 0 */ + unsigned int a_size:24; /* Segment size */ + bfd_vma a_virtbase; /* Virtual address */ + unsigned int a_filebase; /* Base address in object file */ +}; + +#define N_TXTADDR(x) \ + +/* This is documented to be at 1024, but appears to really be at 2048. + FIXME?! */ +#define N_TXTOFF(x) 2048 + +#define N_TXTSIZE(x) ((x).a_text) + +#define N_DATADDR(x) + +#define N_BSSADDR(x) + +/* Offsets of the various portions of the file after the text segment. */ + +#define N_DATOFF(x) ( N_TXTOFF(x) + N_TXTSIZE(x) ) +#define N_TRELOFF(x) ( N_DATOFF(x) + (x).a_data ) +#define N_DRELOFF(x) ( N_TRELOFF(x) + (x).a_trsize ) +#define N_SYMOFF(x) ( N_DRELOFF(x) + (x).a_drsize ) +#define N_STROFF(x) ( N_SYMOFF(x) + (x).a_syms ) + +/* Symbols */ +struct external_nlist { + bfd_byte e_strx[BYTES_IN_WORD]; /* index into string table of name */ + bfd_byte e_type[1]; /* type of symbol */ + bfd_byte e_other[1]; /* misc info (usually empty) */ + bfd_byte e_desc[2]; /* description field */ + bfd_byte e_value[BYTES_IN_WORD]; /* value of symbol */ +}; + +#define EXTERNAL_NLIST_SIZE (BYTES_IN_WORD+4+BYTES_IN_WORD) + +struct internal_nlist { + unsigned long n_strx; /* index into string table of name */ + unsigned char n_type; /* type of symbol */ + unsigned char n_other; /* misc info (usually empty) */ + unsigned short n_desc; /* description field */ + bfd_vma n_value; /* value of symbol */ +}; + +/* The n_type field is the symbol type, containing: */ + +#define N_UNDF 0 /* Undefined symbol */ +#define N_ABS 2 /* Absolute symbol -- defined at particular addr */ +#define N_TEXT 4 /* Text sym -- defined at offset in text seg */ +#define N_DATA 6 /* Data sym -- defined at offset in data seg */ +#define N_BSS 8 /* BSS sym -- defined at offset in zero'd seg */ +#define N_COMM 0x12 /* Common symbol (visible after shared lib dynlink) */ +#define N_FN 0x1f /* File name of .o file */ +#define N_FN_SEQ 0x0C /* N_FN from Sequent compilers (sigh) */ +/* Note: N_EXT can only be usefully OR-ed with N_UNDF, N_ABS, N_TEXT, + N_DATA, or N_BSS. When the low-order bit of other types is set, + (e.g. N_WARNING versus N_FN), they are two different types. */ +#define N_EXT 1 /* External symbol (as opposed to local-to-this-file) */ +#define N_TYPE 0x1e +#define N_STAB 0xe0 /* If any of these bits are on, it's a debug symbol */ + +#define N_INDR 0x0a + +/* The following symbols refer to set elements. + All the N_SET[ATDB] symbols with the same name form one set. + Space is allocated for the set in the text section, and each set + elements value is stored into one word of the space. + The first word of the space is the length of the set (number of elements). + + The address of the set is made into an N_SETV symbol + whose name is the same as the name of the set. + This symbol acts like a N_DATA global symbol + in that it can satisfy undefined external references. */ + +/* These appear as input to LD, in a .o file. */ +#define N_SETA 0x14 /* Absolute set element symbol */ +#define N_SETT 0x16 /* Text set element symbol */ +#define N_SETD 0x18 /* Data set element symbol */ +#define N_SETB 0x1A /* Bss set element symbol */ + +/* This is output from LD. */ +#define N_SETV 0x1C /* Pointer to set vector in data area. */ + +/* Warning symbol. The text gives a warning message, the next symbol + in the table will be undefined. When the symbol is referenced, the + message is printed. */ + +#define N_WARNING 0x1e + +/* Relocations + + There are two types of relocation flavours for a.out systems, + standard and extended. The standard form is used on systems where the + instruction has room for all the bits of an offset to the operand, whilst + the extended form is used when an address operand has to be split over n + instructions. Eg, on the 68k, each move instruction can reference + the target with a displacement of 16 or 32 bits. On the sparc, move + instructions use an offset of 14 bits, so the offset is stored in + the reloc field, and the data in the section is ignored. +*/ + +/* This structure describes a single relocation to be performed. + The text-relocation section of the file is a vector of these structures, + all of which apply to the text section. + Likewise, the data-relocation section applies to the data section. */ + +struct reloc_std_external { + bfd_byte r_address[BYTES_IN_WORD]; /* offset of of data to relocate */ + bfd_byte r_index[3]; /* symbol table index of symbol */ + bfd_byte r_type[1]; /* relocation type */ +}; + +#define RELOC_STD_BITS_PCREL_BIG 0x80 +#define RELOC_STD_BITS_PCREL_LITTLE 0x01 + +#define RELOC_STD_BITS_LENGTH_BIG 0x60 +#define RELOC_STD_BITS_LENGTH_SH_BIG 5 /* To shift to units place */ +#define RELOC_STD_BITS_LENGTH_LITTLE 0x06 +#define RELOC_STD_BITS_LENGTH_SH_LITTLE 1 + +#define RELOC_STD_BITS_EXTERN_BIG 0x10 +#define RELOC_STD_BITS_EXTERN_LITTLE 0x08 + +#define RELOC_STD_BITS_BASEREL_BIG 0x08 +#define RELOC_STD_BITS_BASEREL_LITTLE 0x08 + +#define RELOC_STD_BITS_JMPTABLE_BIG 0x04 +#define RELOC_STD_BITS_JMPTABLE_LITTLE 0x04 + +#define RELOC_STD_BITS_RELATIVE_BIG 0x02 +#define RELOC_STD_BITS_RELATIVE_LITTLE 0x02 + +#define RELOC_STD_SIZE (BYTES_IN_WORD + 3 + 1) /* Bytes per relocation entry */ + +struct reloc_std_internal +{ + bfd_vma r_address; /* Address (within segment) to be relocated. */ + /* The meaning of r_symbolnum depends on r_extern. */ + unsigned int r_symbolnum:24; + /* Nonzero means value is a pc-relative offset + and it should be relocated for changes in its own address + as well as for changes in the symbol or section specified. */ + unsigned int r_pcrel:1; + /* Length (as exponent of 2) of the field to be relocated. + Thus, a value of 2 indicates 1<<2 bytes. */ + unsigned int r_length:2; + /* 1 => relocate with value of symbol. + r_symbolnum is the index of the symbol + in files the symbol table. + 0 => relocate with the address of a segment. + r_symbolnum is N_TEXT, N_DATA, N_BSS or N_ABS + (the N_EXT bit may be set also, but signifies nothing). */ + unsigned int r_extern:1; + /* The next three bits are for SunOS shared libraries, and seem to + be undocumented. */ + unsigned int r_baserel:1; /* Linkage table relative */ + unsigned int r_jmptable:1; /* pc-relative to jump table */ + unsigned int r_relative:1; /* "relative relocation" */ + /* unused */ + unsigned int r_pad:1; /* Padding -- set to zero */ +}; + + +/* EXTENDED RELOCS */ + +struct reloc_ext_external { + bfd_byte r_address[BYTES_IN_WORD]; /* offset of of data to relocate */ + bfd_byte r_index[3]; /* symbol table index of symbol */ + bfd_byte r_type[1]; /* relocation type */ + bfd_byte r_addend[BYTES_IN_WORD]; /* datum addend */ +}; + +#define RELOC_EXT_BITS_EXTERN_BIG 0x80 +#define RELOC_EXT_BITS_EXTERN_LITTLE 0x01 + +#define RELOC_EXT_BITS_TYPE_BIG 0x1F +#define RELOC_EXT_BITS_TYPE_SH_BIG 0 +#define RELOC_EXT_BITS_TYPE_LITTLE 0xF8 +#define RELOC_EXT_BITS_TYPE_SH_LITTLE 3 + +/* Bytes per relocation entry */ +#define RELOC_EXT_SIZE (BYTES_IN_WORD + 3 + 1 + BYTES_IN_WORD) + +enum reloc_type +{ + /* simple relocations */ + RELOC_8, /* data[0:7] = addend + sv */ + RELOC_16, /* data[0:15] = addend + sv */ + RELOC_32, /* data[0:31] = addend + sv */ + /* pc-rel displacement */ + RELOC_DISP8, /* data[0:7] = addend - pc + sv */ + RELOC_DISP16, /* data[0:15] = addend - pc + sv */ + RELOC_DISP32, /* data[0:31] = addend - pc + sv */ + /* Special */ + RELOC_WDISP30, /* data[0:29] = (addend + sv - pc)>>2 */ + RELOC_WDISP22, /* data[0:21] = (addend + sv - pc)>>2 */ + RELOC_HI22, /* data[0:21] = (addend + sv)>>10 */ + RELOC_22, /* data[0:21] = (addend + sv) */ + RELOC_13, /* data[0:12] = (addend + sv) */ + RELOC_LO10, /* data[0:9] = (addend + sv) */ + RELOC_SFA_BASE, + RELOC_SFA_OFF13, + /* P.I.C. (base-relative) */ + RELOC_BASE10, /* Not sure - maybe we can do this the */ + RELOC_BASE13, /* right way now */ + RELOC_BASE22, + /* for some sort of pc-rel P.I.C. (?) */ + RELOC_PC10, + RELOC_PC22, + /* P.I.C. jump table */ + RELOC_JMP_TBL, + /* reputedly for shared libraries somehow */ + RELOC_SEGOFF16, + RELOC_GLOB_DAT, + RELOC_JMP_SLOT, + RELOC_RELATIVE, + + RELOC_11, + RELOC_WDISP2_14, + RELOC_WDISP19, + RELOC_HHI22, /* data[0:21] = (addend + sv) >> 42 */ + RELOC_HLO10, /* data[0:9] = (addend + sv) >> 32 */ + + /* 29K relocation types */ + RELOC_JUMPTARG, + RELOC_CONST, + RELOC_CONSTH, + + NO_RELOC + }; + + +struct reloc_internal { + bfd_vma r_address; /* offset of of data to relocate */ + long r_index; /* symbol table index of symbol */ + enum reloc_type r_type; /* relocation type */ + bfd_vma r_addend; /* datum addend */ +}; + +#endif /* __A_OUT_ADOBE_H__ */ |