diff options
Diffstat (limited to 'binutils-2.25/gas/config/tc-pj.c')
-rw-r--r-- | binutils-2.25/gas/config/tc-pj.c | 495 |
1 files changed, 495 insertions, 0 deletions
diff --git a/binutils-2.25/gas/config/tc-pj.c b/binutils-2.25/gas/config/tc-pj.c new file mode 100644 index 00000000..9dbe810e --- /dev/null +++ b/binutils-2.25/gas/config/tc-pj.c @@ -0,0 +1,495 @@ +/* tc-pj.c -- Assemble code for Pico Java + Copyright 1999, 2000, 2001, 2002, 2003, 2005, 2007, 2009, 2010 + Free Software Foundation, Inc. + + This file is part of GAS, the GNU Assembler. + + GAS is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3, or (at your option) + any later version. + + GAS is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with GAS; see the file COPYING. If not, write to + the Free Software Foundation, 51 Franklin Street - Fifth Floor, + Boston, MA 02110-1301, USA. */ + +/* Contributed by Steve Chamberlain of Transmeta <sac@pobox.com>. */ + +#include "as.h" +#include "safe-ctype.h" +#include "opcode/pj.h" + +extern const pj_opc_info_t pj_opc_info[512]; + +const char comment_chars[] = "!/"; +const char line_separator_chars[] = ";"; +const char line_comment_chars[] = "/!#"; + +static int pending_reloc; +static struct hash_control *opcode_hash_control; + +static void +little (int ignore ATTRIBUTE_UNUSED) +{ + target_big_endian = 0; +} + +static void +big (int ignore ATTRIBUTE_UNUSED) +{ + target_big_endian = 1; +} + +const pseudo_typeS md_pseudo_table[] = +{ + {"ml", little, 0}, + {"mb", big, 0}, + {0, 0, 0} +}; + +const char FLT_CHARS[] = "rRsSfFdDxXpP"; +const char EXP_CHARS[] = "eE"; + +void +md_operand (expressionS *op) +{ + if (strncmp (input_line_pointer, "%hi16", 5) == 0) + { + if (pending_reloc) + as_bad (_("confusing relocation expressions")); + pending_reloc = BFD_RELOC_PJ_CODE_HI16; + input_line_pointer += 5; + expression (op); + } + + if (strncmp (input_line_pointer, "%lo16", 5) == 0) + { + if (pending_reloc) + as_bad (_("confusing relocation expressions")); + pending_reloc = BFD_RELOC_PJ_CODE_LO16; + input_line_pointer += 5; + expression (op); + } +} + +/* Parse an expression and then restore the input line pointer. */ + +static char * +parse_exp_save_ilp (char *s, expressionS *op) +{ + char *save = input_line_pointer; + + input_line_pointer = s; + expression (op); + s = input_line_pointer; + input_line_pointer = save; + return s; +} + +/* This is called by emit_expr via TC_CONS_FIX_NEW when creating a + reloc for a cons. We could use the definition there, except that + we want to handle magic pending reloc expressions specially. */ + +void +pj_cons_fix_new_pj (fragS *frag, int where, int nbytes, expressionS *exp) +{ + static int rv[5][2] = + { { 0, 0 }, + { BFD_RELOC_8, BFD_RELOC_8 }, + { BFD_RELOC_PJ_CODE_DIR16, BFD_RELOC_16 }, + { 0, 0 }, + { BFD_RELOC_PJ_CODE_DIR32, BFD_RELOC_32 }}; + + fix_new_exp (frag, where, nbytes, exp, 0, + pending_reloc ? pending_reloc + : rv[nbytes][(now_seg->flags & SEC_CODE) ? 0 : 1]); + + pending_reloc = 0; +} + +/* Turn a reloc description character from the pj-opc.h table into + code which BFD can handle. */ + +static int +c_to_r (int x) +{ + switch (x) + { + case O_R8: + return BFD_RELOC_8_PCREL; + case O_U8: + case O_8: + return BFD_RELOC_8; + case O_R16: + return BFD_RELOC_PJ_CODE_REL16; + case O_U16: + case O_16: + return BFD_RELOC_PJ_CODE_DIR16; + case O_R32: + return BFD_RELOC_PJ_CODE_REL32; + case O_32: + return BFD_RELOC_PJ_CODE_DIR32; + } + abort (); + return 0; +} + +/* Handler for the ipush fake opcode, + turns ipush <foo> into sipush lo16<foo>, sethi hi16<foo>. */ + +static void +ipush_code (pj_opc_info_t *opcode ATTRIBUTE_UNUSED, char *str) +{ + char *b = frag_more (6); + expressionS arg; + + b[0] = 0x11; + b[3] = 0xed; + parse_exp_save_ilp (str + 1, &arg); + if (pending_reloc) + { + as_bad (_("can't have relocation for ipush")); + pending_reloc = 0; + } + + fix_new_exp (frag_now, b - frag_now->fr_literal + 1, 2, + &arg, 0, BFD_RELOC_PJ_CODE_DIR16); + fix_new_exp (frag_now, b - frag_now->fr_literal + 4, 2, + &arg, 0, BFD_RELOC_PJ_CODE_HI16); +} + +/* Insert names into the opcode table which are really mini macros, + not opcodes. The fakeness is indicated with an opcode of -1. */ + +static void +fake_opcode (const char *name, + void (*func) (struct pj_opc_info_t *, char *)) +{ + pj_opc_info_t * fake = xmalloc (sizeof (pj_opc_info_t)); + + fake->opcode = -1; + fake->opcode_next = -1; + fake->u.func = func; + hash_insert (opcode_hash_control, name, (char *) fake); +} + +/* Enter another entry into the opcode hash table so the same opcode + can have another name. */ + +static void +alias (const char *new_name, const char *old) +{ + hash_insert (opcode_hash_control, new_name, + (char *) hash_find (opcode_hash_control, old)); +} + +/* This function is called once, at assembler startup time. It sets + up the hash table with all the opcodes in it, and also initializes + some aliases for compatibility with other assemblers. */ + +void +md_begin (void) +{ + const pj_opc_info_t *opcode; + opcode_hash_control = hash_new (); + + /* Insert names into hash table. */ + for (opcode = pj_opc_info; opcode->u.name; opcode++) + hash_insert (opcode_hash_control, opcode->u.name, (char *) opcode); + + /* Insert the only fake opcode. */ + fake_opcode ("ipush", ipush_code); + + /* Add some aliases for opcode names. */ + alias ("ifeq_s", "ifeq"); + alias ("ifne_s", "ifne"); + alias ("if_icmpge_s", "if_icmpge"); + alias ("if_icmpne_s", "if_icmpne"); + alias ("if_icmpeq_s", "if_icmpeq"); + alias ("if_icmpgt_s", "if_icmpgt"); + alias ("goto_s", "goto"); + + bfd_set_arch_mach (stdoutput, TARGET_ARCH, 0); +} + +/* This is the guts of the machine-dependent assembler. STR points to + a machine dependent instruction. This function is supposed to emit + the frags/bytes it assembles to. */ + +void +md_assemble (char *str) +{ + char *op_start; + char *op_end; + + pj_opc_info_t *opcode; + char *output; + int idx = 0; + char pend; + + int nlen = 0; + + /* Drop leading whitespace. */ + while (*str == ' ') + str++; + + /* Find the op code end. */ + op_start = str; + for (op_end = str; + *op_end && !is_end_of_line[*op_end & 0xff] && *op_end != ' '; + op_end++) + nlen++; + + pend = *op_end; + *op_end = 0; + + if (nlen == 0) + as_bad (_("can't find opcode ")); + + opcode = (pj_opc_info_t *) hash_find (opcode_hash_control, op_start); + *op_end = pend; + + if (opcode == NULL) + { + as_bad (_("unknown opcode %s"), op_start); + return; + } + + dwarf2_emit_insn (0); + if (opcode->opcode == -1) + { + /* It's a fake opcode. Dig out the args and pretend that was + what we were passed. */ + (*opcode->u.func) (opcode, op_end); + } + else + { + int an; + + output = frag_more (opcode->len); + output[idx++] = opcode->opcode; + + if (opcode->opcode_next != -1) + output[idx++] = opcode->opcode_next; + + for (an = 0; opcode->arg[an]; an++) + { + expressionS arg; + + if (*op_end == ',' && an != 0) + op_end++; + + if (*op_end == 0) + as_bad (_("expected expression")); + + op_end = parse_exp_save_ilp (op_end, &arg); + + fix_new_exp (frag_now, + output - frag_now->fr_literal + idx, + ASIZE (opcode->arg[an]), + &arg, + PCREL (opcode->arg[an]), + pending_reloc ? pending_reloc : c_to_r (opcode->arg[an])); + + idx += ASIZE (opcode->arg[an]); + pending_reloc = 0; + } + + while (ISSPACE (*op_end)) + op_end++; + + if (*op_end != 0) + as_warn (_("extra stuff on line ignored")); + + } + + if (pending_reloc) + as_bad (_("Something forgot to clean up\n")); +} + +char * +md_atof (int type, char *litP, int *sizeP) +{ + return ieee_md_atof (type, litP, sizeP, target_big_endian); +} + +const char *md_shortopts = ""; + +struct option md_longopts[] = +{ +#define OPTION_LITTLE (OPTION_MD_BASE) +#define OPTION_BIG (OPTION_LITTLE + 1) + + {"little", no_argument, NULL, OPTION_LITTLE}, + {"big", no_argument, NULL, OPTION_BIG}, + {NULL, no_argument, NULL, 0} +}; +size_t md_longopts_size = sizeof (md_longopts); + +int +md_parse_option (int c, char *arg ATTRIBUTE_UNUSED) +{ + switch (c) + { + case OPTION_LITTLE: + little (0); + break; + case OPTION_BIG: + big (0); + break; + default: + return 0; + } + return 1; +} + +void +md_show_usage (FILE *stream) +{ + fprintf (stream, _("\ +PJ options:\n\ +-little generate little endian code\n\ +-big generate big endian code\n")); +} + +/* Apply a fixup to the object file. */ + +void +md_apply_fix (fixS *fixP, valueT * valP, segT seg ATTRIBUTE_UNUSED) +{ + char *buf = fixP->fx_where + fixP->fx_frag->fr_literal; + long val = *valP; + long max, min; + + max = min = 0; + switch (fixP->fx_r_type) + { + case BFD_RELOC_VTABLE_INHERIT: + case BFD_RELOC_VTABLE_ENTRY: + fixP->fx_done = 0; + return; + + case BFD_RELOC_PJ_CODE_REL16: + if (val < -0x8000 || val >= 0x7fff) + as_bad_where (fixP->fx_file, fixP->fx_line, _("pcrel too far")); + buf[0] |= (val >> 8) & 0xff; + buf[1] = val & 0xff; + break; + + case BFD_RELOC_PJ_CODE_HI16: + *buf++ = val >> 24; + *buf++ = val >> 16; + fixP->fx_addnumber = val & 0xffff; + break; + + case BFD_RELOC_PJ_CODE_DIR16: + case BFD_RELOC_PJ_CODE_LO16: + *buf++ = val >> 8; + *buf++ = val >> 0; + + max = 0xffff; + min = -0xffff; + break; + + case BFD_RELOC_8: + max = 0xff; + min = -0xff; + *buf++ = val; + break; + + case BFD_RELOC_PJ_CODE_DIR32: + *buf++ = val >> 24; + *buf++ = val >> 16; + *buf++ = val >> 8; + *buf++ = val >> 0; + break; + + case BFD_RELOC_32: + if (target_big_endian) + { + *buf++ = val >> 24; + *buf++ = val >> 16; + *buf++ = val >> 8; + *buf++ = val >> 0; + } + else + { + *buf++ = val >> 0; + *buf++ = val >> 8; + *buf++ = val >> 16; + *buf++ = val >> 24; + } + break; + + case BFD_RELOC_16: + if (target_big_endian) + { + *buf++ = val >> 8; + *buf++ = val >> 0; + } + else + { + *buf++ = val >> 0; + *buf++ = val >> 8; + } + break; + + default: + abort (); + } + + if (max != 0 && (val < min || val > max)) + as_bad_where (fixP->fx_file, fixP->fx_line, _("offset out of range")); + + if (fixP->fx_addsy == NULL && fixP->fx_pcrel == 0) + fixP->fx_done = 1; +} + +/* Put number into target byte order. Always put values in an + executable section into big endian order. */ + +void +md_number_to_chars (char *ptr, valueT use, int nbytes) +{ + if (target_big_endian || now_seg->flags & SEC_CODE) + number_to_chars_bigendian (ptr, use, nbytes); + else + number_to_chars_littleendian (ptr, use, nbytes); +} + +/* Translate internal representation of relocation info to BFD target + format. */ + +arelent * +tc_gen_reloc (asection *section ATTRIBUTE_UNUSED, fixS *fixp) +{ + arelent *rel; + bfd_reloc_code_real_type r_type; + + rel = xmalloc (sizeof (arelent)); + rel->sym_ptr_ptr = xmalloc (sizeof (asymbol *)); + *rel->sym_ptr_ptr = symbol_get_bfdsym (fixp->fx_addsy); + rel->address = fixp->fx_frag->fr_address + fixp->fx_where; + + r_type = fixp->fx_r_type; + rel->addend = fixp->fx_addnumber; + rel->howto = bfd_reloc_type_lookup (stdoutput, r_type); + + if (rel->howto == NULL) + { + as_bad_where (fixp->fx_file, fixp->fx_line, + _("Cannot represent relocation type %s"), + bfd_get_reloc_code_name (r_type)); + /* Set howto to a garbage value so that we can keep going. */ + rel->howto = bfd_reloc_type_lookup (stdoutput, BFD_RELOC_32); + gas_assert (rel->howto != NULL); + } + + return rel; +} |