summaryrefslogtreecommitdiffstats
path: root/binutils-2.25/gas/config/tc-microblaze.c
diff options
context:
space:
mode:
Diffstat (limited to 'binutils-2.25/gas/config/tc-microblaze.c')
-rw-r--r--binutils-2.25/gas/config/tc-microblaze.c2525
1 files changed, 2525 insertions, 0 deletions
diff --git a/binutils-2.25/gas/config/tc-microblaze.c b/binutils-2.25/gas/config/tc-microblaze.c
new file mode 100644
index 00000000..872737b3
--- /dev/null
+++ b/binutils-2.25/gas/config/tc-microblaze.c
@@ -0,0 +1,2525 @@
+/* tc-microblaze.c -- Assemble code for Xilinx MicroBlaze
+
+ Copyright 2009, 2010, 2012 Free Software Foundation.
+
+ This file is part of GAS, the GNU Assembler.
+
+ GAS is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3, or (at your option)
+ any later version.
+
+ GAS is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with GAS; see the file COPYING. If not, write to the Free
+ Software Foundation, 51 Franklin Street - Fifth Floor, Boston, MA
+ 02110-1301, USA. */
+
+#include "as.h"
+#include <stdio.h>
+#include "bfd.h"
+#include "subsegs.h"
+#define DEFINE_TABLE
+#include "../opcodes/microblaze-opc.h"
+#include "../opcodes/microblaze-opcm.h"
+#include "safe-ctype.h"
+#include <string.h>
+#include <dwarf2dbg.h>
+#include "aout/stab_gnu.h"
+
+#ifndef streq
+#define streq(a,b) (strcmp (a, b) == 0)
+#endif
+
+#define OPTION_EB (OPTION_MD_BASE + 0)
+#define OPTION_EL (OPTION_MD_BASE + 1)
+
+void microblaze_generate_symbol (char *sym);
+static bfd_boolean check_spl_reg (unsigned *);
+
+/* Several places in this file insert raw instructions into the
+ object. They should generate the instruction
+ and then use these four macros to crack the instruction value into
+ the appropriate byte values. */
+#define INST_BYTE0(x) (target_big_endian ? (((x) >> 24) & 0xFF) : ((x) & 0xFF))
+#define INST_BYTE1(x) (target_big_endian ? (((x) >> 16) & 0xFF) : (((x) >> 8) & 0xFF))
+#define INST_BYTE2(x) (target_big_endian ? (((x) >> 8) & 0xFF) : (((x) >> 16) & 0xFF))
+#define INST_BYTE3(x) (target_big_endian ? ((x) & 0xFF) : (((x) >> 24) & 0xFF))
+
+/* This array holds the chars that always start a comment. If the
+ pre-processor is disabled, these aren't very useful. */
+const char comment_chars[] = "#";
+
+const char line_separator_chars[] = ";";
+
+/* This array holds the chars that only start a comment at the beginning of
+ a line. */
+const char line_comment_chars[] = "#";
+
+const int md_reloc_size = 8; /* Size of relocation record. */
+
+/* Chars that can be used to separate mant
+ from exp in floating point numbers. */
+const char EXP_CHARS[] = "eE";
+
+/* Chars that mean this number is a floating point constant
+ As in 0f12.456
+ or 0d1.2345e12. */
+const char FLT_CHARS[] = "rRsSfFdDxXpP";
+
+/* INST_PC_OFFSET and INST_NO_OFFSET are 0 and 1. */
+#define UNDEFINED_PC_OFFSET 2
+#define DEFINED_ABS_SEGMENT 3
+#define DEFINED_PC_OFFSET 4
+#define DEFINED_RO_SEGMENT 5
+#define DEFINED_RW_SEGMENT 6
+#define LARGE_DEFINED_PC_OFFSET 7
+#define GOT_OFFSET 8
+#define PLT_OFFSET 9
+#define GOTOFF_OFFSET 10
+#define TLSGD_OFFSET 11
+#define TLSLD_OFFSET 12
+#define TLSDTPMOD_OFFSET 13
+#define TLSDTPREL_OFFSET 14
+#define TLSGOTTPREL_OFFSET 15
+#define TLSTPREL_OFFSET 16
+
+/* Initialize the relax table. */
+const relax_typeS md_relax_table[] =
+{
+ { 1, 1, 0, 0 }, /* 0: Unused. */
+ { 1, 1, 0, 0 }, /* 1: Unused. */
+ { 1, 1, 0, 0 }, /* 2: Unused. */
+ { 1, 1, 0, 0 }, /* 3: Unused. */
+ { 32767, -32768, INST_WORD_SIZE, LARGE_DEFINED_PC_OFFSET }, /* 4: DEFINED_PC_OFFSET. */
+ { 1, 1, 0, 0 }, /* 5: Unused. */
+ { 1, 1, 0, 0 }, /* 6: Unused. */
+ { 0x7fffffff, 0x80000000, INST_WORD_SIZE*2, 0 }, /* 7: LARGE_DEFINED_PC_OFFSET. */
+ { 0x7fffffff, 0x80000000, INST_WORD_SIZE*2, 0 }, /* 8: GOT_OFFSET. */
+ { 0x7fffffff, 0x80000000, INST_WORD_SIZE*2, 0 }, /* 9: PLT_OFFSET. */
+ { 0x7fffffff, 0x80000000, INST_WORD_SIZE*2, 0 }, /* 10: GOTOFF_OFFSET. */
+ { 0x7fffffff, 0x80000000, INST_WORD_SIZE*2, 0 }, /* 11: TLSGD_OFFSET. */
+ { 0x7fffffff, 0x80000000, INST_WORD_SIZE*2, 0 }, /* 12: TLSLD_OFFSET. */
+ { 0x7fffffff, 0x80000000, INST_WORD_SIZE*1, 0 }, /* 13: TLSDTPMOD_OFFSET. */
+ { 0x7fffffff, 0x80000000, INST_WORD_SIZE*2, 0 }, /* 14: TLSDTPREL_OFFSET. */
+ { 0x7fffffff, 0x80000000, INST_WORD_SIZE*2, 0 }, /* 15: TLSGOTTPREL_OFFSET. */
+ { 0x7fffffff, 0x80000000, INST_WORD_SIZE*2, 0 } /* 16: TLSTPREL_OFFSET. */
+};
+
+static struct hash_control * opcode_hash_control; /* Opcode mnemonics. */
+
+static segT sbss_segment = 0; /* Small bss section. */
+static segT sbss2_segment = 0; /* Section not used. */
+static segT sdata_segment = 0; /* Small data section. */
+static segT sdata2_segment = 0; /* Small read-only section. */
+static segT rodata_segment = 0; /* read-only section. */
+
+/* Generate a symbol for stabs information. */
+
+void
+microblaze_generate_symbol (char *sym)
+{
+#define MICROBLAZE_FAKE_LABEL_NAME "XL0\001"
+ static int microblaze_label_count;
+ sprintf (sym, "%sL%d", MICROBLAZE_FAKE_LABEL_NAME, microblaze_label_count);
+ ++microblaze_label_count;
+}
+
+/* Handle the section changing pseudo-ops. */
+
+static void
+microblaze_s_text (int ignore ATTRIBUTE_UNUSED)
+{
+#ifdef OBJ_ELF
+ obj_elf_text (ignore);
+#else
+ s_text (ignore);
+#endif
+}
+
+static void
+microblaze_s_data (int ignore ATTRIBUTE_UNUSED)
+{
+#ifdef OBJ_ELF
+ obj_elf_change_section (".data", SHT_PROGBITS, SHF_ALLOC+SHF_WRITE, 0, 0, 0, 0);
+#else
+ s_data (ignore);
+#endif
+}
+
+/* Things in the .sdata segment are always considered to be in the small data section. */
+
+static void
+microblaze_s_sdata (int ignore ATTRIBUTE_UNUSED)
+{
+#ifdef OBJ_ELF
+ obj_elf_change_section (".sdata", SHT_PROGBITS, SHF_ALLOC+SHF_WRITE, 0, 0, 0, 0);
+#else
+ s_data (ignore);
+#endif
+}
+
+/* Pseudo op to make file scope bss items. */
+
+static void
+microblaze_s_lcomm (int xxx ATTRIBUTE_UNUSED)
+{
+ char *name;
+ char c;
+ char *p;
+ offsetT size;
+ symbolS *symbolP;
+ offsetT align;
+ char *pfrag;
+ int align2;
+ segT current_seg = now_seg;
+ subsegT current_subseg = now_subseg;
+
+ name = input_line_pointer;
+ c = get_symbol_end ();
+
+ /* Just after name is now '\0'. */
+ p = input_line_pointer;
+ *p = c;
+ SKIP_WHITESPACE ();
+ if (*input_line_pointer != ',')
+ {
+ as_bad (_("Expected comma after symbol-name: rest of line ignored."));
+ ignore_rest_of_line ();
+ return;
+ }
+
+ input_line_pointer++; /* skip ',' */
+ if ((size = get_absolute_expression ()) < 0)
+ {
+ as_warn (_(".COMMon length (%ld.) <0! Ignored."), (long) size);
+ ignore_rest_of_line ();
+ return;
+ }
+
+ /* The third argument to .lcomm is the alignment. */
+ if (*input_line_pointer != ',')
+ align = 8;
+ else
+ {
+ ++input_line_pointer;
+ align = get_absolute_expression ();
+ if (align <= 0)
+ {
+ as_warn (_("ignoring bad alignment"));
+ align = 8;
+ }
+ }
+
+ *p = 0;
+ symbolP = symbol_find_or_make (name);
+ *p = c;
+
+ if (S_IS_DEFINED (symbolP) && ! S_IS_COMMON (symbolP))
+ {
+ as_bad (_("Ignoring attempt to re-define symbol `%s'."),
+ S_GET_NAME (symbolP));
+ ignore_rest_of_line ();
+ return;
+ }
+
+ if (S_GET_VALUE (symbolP) && S_GET_VALUE (symbolP) != (valueT) size)
+ {
+ as_bad (_("Length of .lcomm \"%s\" is already %ld. Not changed to %ld."),
+ S_GET_NAME (symbolP),
+ (long) S_GET_VALUE (symbolP),
+ (long) size);
+
+ ignore_rest_of_line ();
+ return;
+ }
+
+ /* Allocate_bss. */
+ if (align)
+ {
+ /* Convert to a power of 2 alignment. */
+ for (align2 = 0; (align & 1) == 0; align >>= 1, ++align2);
+ if (align != 1)
+ {
+ as_bad (_("Common alignment not a power of 2"));
+ ignore_rest_of_line ();
+ return;
+ }
+ }
+ else
+ align2 = 0;
+
+ record_alignment (current_seg, align2);
+ subseg_set (current_seg, current_subseg);
+ if (align2)
+ frag_align (align2, 0, 0);
+ if (S_GET_SEGMENT (symbolP) == current_seg)
+ symbol_get_frag (symbolP)->fr_symbol = 0;
+ symbol_set_frag (symbolP, frag_now);
+ pfrag = frag_var (rs_org, 1, 1, (relax_substateT) 0, symbolP, size,
+ (char *) 0);
+ *pfrag = 0;
+ S_SET_SIZE (symbolP, size);
+ S_SET_SEGMENT (symbolP, current_seg);
+ subseg_set (current_seg, current_subseg);
+ demand_empty_rest_of_line ();
+}
+
+static void
+microblaze_s_rdata (int localvar)
+{
+#ifdef OBJ_ELF
+ if (localvar == 0)
+ {
+ /* rodata. */
+ obj_elf_change_section (".rodata", SHT_PROGBITS, SHF_ALLOC, 0, 0, 0, 0);
+ if (rodata_segment == 0)
+ rodata_segment = subseg_new (".rodata", 0);
+ }
+ else
+ {
+ /* 1 .sdata2. */
+ obj_elf_change_section (".sdata2", SHT_PROGBITS, SHF_ALLOC, 0, 0, 0, 0);
+ }
+#else
+ s_data (ignore);
+#endif
+}
+
+static void
+microblaze_s_bss (int localvar)
+{
+#ifdef OBJ_ELF
+ if (localvar == 0) /* bss. */
+ obj_elf_change_section (".bss", SHT_NOBITS, SHF_ALLOC+SHF_WRITE, 0, 0, 0, 0);
+ else if (localvar == 1)
+ {
+ /* sbss. */
+ obj_elf_change_section (".sbss", SHT_NOBITS, SHF_ALLOC+SHF_WRITE, 0, 0, 0, 0);
+ if (sbss_segment == 0)
+ sbss_segment = subseg_new (".sbss", 0);
+ }
+#else
+ s_data (ignore);
+#endif
+}
+
+/* endp_p is always 1 as this func is called only for .end <funcname>
+ This func consumes the <funcname> and calls regular processing
+ s_func(1) with arg 1 (1 for end). */
+
+static void
+microblaze_s_func (int end_p ATTRIBUTE_UNUSED)
+{
+ *input_line_pointer = get_symbol_end ();
+ s_func (1);
+}
+
+/* Handle the .weakext pseudo-op as defined in Kane and Heinrich. */
+
+static void
+microblaze_s_weakext (int ignore ATTRIBUTE_UNUSED)
+{
+ char *name;
+ int c;
+ symbolS *symbolP;
+ expressionS exp;
+
+ name = input_line_pointer;
+ c = get_symbol_end ();
+ symbolP = symbol_find_or_make (name);
+ S_SET_WEAK (symbolP);
+ *input_line_pointer = c;
+
+ SKIP_WHITESPACE ();
+
+ if (!is_end_of_line[(unsigned char) *input_line_pointer])
+ {
+ if (S_IS_DEFINED (symbolP))
+ {
+ as_bad ("Ignoring attempt to redefine symbol `%s'.",
+ S_GET_NAME (symbolP));
+ ignore_rest_of_line ();
+ return;
+ }
+
+ if (*input_line_pointer == ',')
+ {
+ ++input_line_pointer;
+ SKIP_WHITESPACE ();
+ }
+
+ expression (&exp);
+ if (exp.X_op != O_symbol)
+ {
+ as_bad ("bad .weakext directive");
+ ignore_rest_of_line ();
+ return;
+ }
+ symbol_set_value_expression (symbolP, &exp);
+ }
+
+ demand_empty_rest_of_line ();
+}
+
+/* This table describes all the machine specific pseudo-ops the assembler
+ has to support. The fields are:
+ Pseudo-op name without dot
+ Function to call to execute this pseudo-op
+ Integer arg to pass to the function. */
+/* If the pseudo-op is not found in this table, it searches in the obj-elf.c,
+ and then in the read.c table. */
+const pseudo_typeS md_pseudo_table[] =
+{
+ {"lcomm", microblaze_s_lcomm, 1},
+ {"data", microblaze_s_data, 0},
+ {"data8", cons, 1}, /* Same as byte. */
+ {"data16", cons, 2}, /* Same as hword. */
+ {"data32", cons, 4}, /* Same as word. */
+ {"ent", s_func, 0}, /* Treat ent as function entry point. */
+ {"end", microblaze_s_func, 1}, /* Treat end as function end point. */
+ {"gpword", s_rva, 4}, /* gpword label => store resolved label address in data section. */
+ {"weakext", microblaze_s_weakext, 0},
+ {"rodata", microblaze_s_rdata, 0},
+ {"sdata2", microblaze_s_rdata, 1},
+ {"sdata", microblaze_s_sdata, 0},
+ {"bss", microblaze_s_bss, 0},
+ {"sbss", microblaze_s_bss, 1},
+ {"text", microblaze_s_text, 0},
+ {"word", cons, 4},
+ {"frame", s_ignore, 0},
+ {"mask", s_ignore, 0}, /* Emitted by gcc. */
+ {NULL, NULL, 0}
+};
+
+/* This function is called once, at assembler startup time. This should
+ set up all the tables, etc that the MD part of the assembler needs. */
+
+void
+md_begin (void)
+{
+ struct op_code_struct * opcode;
+
+ opcode_hash_control = hash_new ();
+
+ /* Insert unique names into hash table. */
+ for (opcode = opcodes; opcode->name; opcode ++)
+ hash_insert (opcode_hash_control, opcode->name, (char *) opcode);
+}
+
+/* Try to parse a reg name. */
+
+static char *
+parse_reg (char * s, unsigned * reg)
+{
+ unsigned tmpreg = 0;
+
+ /* Strip leading whitespace. */
+ while (ISSPACE (* s))
+ ++ s;
+
+ if (strncasecmp (s, "rpc", 3) == 0)
+ {
+ *reg = REG_PC;
+ return s + 3;
+ }
+ else if (strncasecmp (s, "rmsr", 4) == 0)
+ {
+ *reg = REG_MSR;
+ return s + 4;
+ }
+ else if (strncasecmp (s, "rear", 4) == 0)
+ {
+ *reg = REG_EAR;
+ return s + 4;
+ }
+ else if (strncasecmp (s, "resr", 4) == 0)
+ {
+ *reg = REG_ESR;
+ return s + 4;
+ }
+ else if (strncasecmp (s, "rfsr", 4) == 0)
+ {
+ *reg = REG_FSR;
+ return s + 4;
+ }
+ else if (strncasecmp (s, "rbtr", 4) == 0)
+ {
+ *reg = REG_BTR;
+ return s + 4;
+ }
+ else if (strncasecmp (s, "redr", 4) == 0)
+ {
+ *reg = REG_EDR;
+ return s + 4;
+ }
+ /* MMU registers start. */
+ else if (strncasecmp (s, "rpid", 4) == 0)
+ {
+ *reg = REG_PID;
+ return s + 4;
+ }
+ else if (strncasecmp (s, "rzpr", 4) == 0)
+ {
+ *reg = REG_ZPR;
+ return s + 4;
+ }
+ else if (strncasecmp (s, "rtlbx", 5) == 0)
+ {
+ *reg = REG_TLBX;
+ return s + 5;
+ }
+ else if (strncasecmp (s, "rtlblo", 6) == 0)
+ {
+ *reg = REG_TLBLO;
+ return s + 6;
+ }
+ else if (strncasecmp (s, "rtlbhi", 6) == 0)
+ {
+ *reg = REG_TLBHI;
+ return s + 6;
+ }
+ else if (strncasecmp (s, "rtlbsx", 6) == 0)
+ {
+ *reg = REG_TLBSX;
+ return s + 6;
+ }
+ /* MMU registers end. */
+ else if (strncasecmp (s, "rpvr", 4) == 0)
+ {
+ if (ISDIGIT (s[4]) && ISDIGIT (s[5]))
+ {
+ tmpreg = (s[4]-'0')*10 + s[5] - '0';
+ s += 6;
+ }
+
+ else if (ISDIGIT (s[4]))
+ {
+ tmpreg = s[4] - '0';
+ s += 5;
+ }
+ else
+ as_bad (_("register expected, but saw '%.6s'"), s);
+ if ((int) tmpreg >= MIN_PVR_REGNUM && tmpreg <= MAX_PVR_REGNUM)
+ *reg = REG_PVR + tmpreg;
+ else
+ {
+ as_bad (_("Invalid register number at '%.6s'"), s);
+ *reg = REG_PVR;
+ }
+ return s;
+ }
+ else if (strncasecmp (s, "rsp", 3) == 0)
+ {
+ *reg = REG_SP;
+ return s + 3;
+ }
+ else if (strncasecmp (s, "rfsl", 4) == 0)
+ {
+ if (ISDIGIT (s[4]) && ISDIGIT (s[5]))
+ {
+ tmpreg = (s[4] - '0') * 10 + s[5] - '0';
+ s += 6;
+ }
+ else if (ISDIGIT (s[4]))
+ {
+ tmpreg = s[4] - '0';
+ s += 5;
+ }
+ else
+ as_bad (_("register expected, but saw '%.6s'"), s);
+
+ if ((int) tmpreg >= MIN_REGNUM && tmpreg <= MAX_REGNUM)
+ *reg = tmpreg;
+ else
+ {
+ as_bad (_("Invalid register number at '%.6s'"), s);
+ *reg = 0;
+ }
+ return s;
+ }
+ /* Stack protection registers. */
+ else if (strncasecmp (s, "rshr", 4) == 0)
+ {
+ *reg = REG_SHR;
+ return s + 4;
+ }
+ else if (strncasecmp (s, "rslr", 4) == 0)
+ {
+ *reg = REG_SLR;
+ return s + 4;
+ }
+ else
+ {
+ if (TOLOWER (s[0]) == 'r')
+ {
+ if (ISDIGIT (s[1]) && ISDIGIT (s[2]))
+ {
+ tmpreg = (s[1] - '0') * 10 + s[2] - '0';
+ s += 3;
+ }
+ else if (ISDIGIT (s[1]))
+ {
+ tmpreg = s[1] - '0';
+ s += 2;
+ }
+ else
+ as_bad (_("register expected, but saw '%.6s'"), s);
+
+ if ((int)tmpreg >= MIN_REGNUM && tmpreg <= MAX_REGNUM)
+ *reg = tmpreg;
+ else
+ {
+ as_bad (_("Invalid register number at '%.6s'"), s);
+ *reg = 0;
+ }
+ return s;
+ }
+ }
+ as_bad (_("register expected, but saw '%.6s'"), s);
+ *reg = 0;
+ return s;
+}
+
+static char *
+parse_exp (char *s, expressionS *e)
+{
+ char *save;
+ char *new_pointer;
+
+ /* Skip whitespace. */
+ while (ISSPACE (* s))
+ ++ s;
+
+ save = input_line_pointer;
+ input_line_pointer = s;
+
+ expression (e);
+
+ if (e->X_op == O_absent)
+ as_fatal (_("missing operand"));
+
+ new_pointer = input_line_pointer;
+ input_line_pointer = save;
+
+ return new_pointer;
+}
+
+/* Symbol modifiers (@GOT, @PLT, @GOTOFF). */
+#define IMM_NONE 0
+#define IMM_GOT 1
+#define IMM_PLT 2
+#define IMM_GOTOFF 3
+#define IMM_TLSGD 4
+#define IMM_TLSLD 5
+#define IMM_TLSDTPMOD 6
+#define IMM_TLSDTPREL 7
+#define IMM_TLSTPREL 8
+#define IMM_MAX 9
+
+struct imm_type {
+ char *isuffix; /* Suffix String */
+ int itype; /* Suffix Type */
+ int otype; /* Offset Type */
+};
+
+/* These are NOT in assending order of type, GOTOFF is ahead to make
+ sure @GOTOFF does not get matched with @GOT */
+static struct imm_type imm_types[] = {
+ { "NONE", IMM_NONE , 0 },
+ { "GOTOFF", IMM_GOTOFF , GOTOFF_OFFSET },
+ { "GOT", IMM_GOT , GOT_OFFSET },
+ { "PLT", IMM_PLT , PLT_OFFSET },
+ { "TLSGD", IMM_TLSGD , TLSGD_OFFSET },
+ { "TLSLDM", IMM_TLSLD, TLSLD_OFFSET },
+ { "TLSDTPMOD", IMM_TLSDTPMOD, TLSDTPMOD_OFFSET },
+ { "TLSDTPREL", IMM_TLSDTPREL, TLSDTPREL_OFFSET },
+ { "TLSTPREL", IMM_TLSTPREL, TLSTPREL_OFFSET }
+};
+
+static int
+match_imm (const char *s, int *ilen)
+{
+ int i;
+ int slen;
+
+ /* Check for matching suffix */
+ for (i = 1; i < IMM_MAX; i++)
+ {
+ slen = strlen (imm_types[i].isuffix);
+
+ if (strncmp (imm_types[i].isuffix, s, slen) == 0)
+ {
+ *ilen = slen;
+ return imm_types[i].itype;
+ }
+ } /* for */
+ *ilen = 0;
+ return 0;
+}
+
+static int
+get_imm_otype (int itype)
+{
+ int i, otype;
+
+ otype = 0;
+ /* Check for matching itype */
+ for (i = 1; i < IMM_MAX; i++)
+ {
+ if (imm_types[i].itype == itype)
+ {
+ otype = imm_types[i].otype;
+ break;
+ }
+ }
+ return otype;
+}
+
+static symbolS * GOT_symbol;
+
+#define GOT_SYMBOL_NAME "_GLOBAL_OFFSET_TABLE_"
+
+static char *
+parse_imm (char * s, expressionS * e, int min, int max)
+{
+ char *new_pointer;
+ char *atp;
+ int itype, ilen;
+
+ ilen = 0;
+
+ /* Find the start of "@GOT" or "@PLT" suffix (if any) */
+ for (atp = s; *atp != '@'; atp++)
+ if (is_end_of_line[(unsigned char) *atp])
+ break;
+
+ if (*atp == '@')
+ {
+ itype = match_imm (atp + 1, &ilen);
+ if (itype != 0)
+ {
+ *atp = 0;
+ e->X_md = itype;
+ }
+ else
+ {
+ atp = NULL;
+ e->X_md = 0;
+ ilen = 0;
+ }
+ *atp = 0;
+ }
+ else
+ {
+ atp = NULL;
+ e->X_md = 0;
+ }
+
+ if (atp && !GOT_symbol)
+ {
+ GOT_symbol = symbol_find_or_make (GOT_SYMBOL_NAME);
+ }
+
+ new_pointer = parse_exp (s, e);
+
+ if (!GOT_symbol && ! strncmp (s, GOT_SYMBOL_NAME, 20))
+ {
+ GOT_symbol = symbol_find_or_make (GOT_SYMBOL_NAME);
+ }
+
+ if (e->X_op == O_absent)
+ ; /* An error message has already been emitted. */
+ else if ((e->X_op != O_constant && e->X_op != O_symbol) )
+ as_fatal (_("operand must be a constant or a label"));
+ else if ((e->X_op == O_constant) && ((int) e->X_add_number < min
+ || (int) e->X_add_number > max))
+ {
+ as_fatal (_("operand must be absolute in range %d..%d, not %d"),
+ min, max, (int) e->X_add_number);
+ }
+
+ if (atp)
+ {
+ *atp = '@'; /* restore back (needed?) */
+ if (new_pointer >= atp)
+ new_pointer += ilen + 1; /* sizeof (imm_suffix) + 1 for '@' */
+ }
+ return new_pointer;
+}
+
+static char *
+check_got (int * got_type, int * got_len)
+{
+ char *new_pointer;
+ char *atp;
+ char *past_got;
+ int first, second;
+ char *tmpbuf;
+
+ /* Find the start of "@GOT" or "@PLT" suffix (if any). */
+ for (atp = input_line_pointer; *atp != '@'; atp++)
+ if (is_end_of_line[(unsigned char) *atp])
+ return NULL;
+
+ if (strncmp (atp + 1, "GOTOFF", 5) == 0)
+ {
+ *got_len = 6;
+ *got_type = IMM_GOTOFF;
+ }
+ else if (strncmp (atp + 1, "GOT", 3) == 0)
+ {
+ *got_len = 3;
+ *got_type = IMM_GOT;
+ }
+ else if (strncmp (atp + 1, "PLT", 3) == 0)
+ {
+ *got_len = 3;
+ *got_type = IMM_PLT;
+ }
+ else
+ return NULL;
+
+ if (!GOT_symbol)
+ GOT_symbol = symbol_find_or_make (GOT_SYMBOL_NAME);
+
+ first = atp - input_line_pointer;
+
+ past_got = atp + *got_len + 1;
+ for (new_pointer = past_got; !is_end_of_line[(unsigned char) *new_pointer++];)
+ ;
+ second = new_pointer - past_got;
+ tmpbuf = xmalloc (first + second + 2); /* One extra byte for ' ' and one for NUL. */
+ memcpy (tmpbuf, input_line_pointer, first);
+ tmpbuf[first] = ' '; /* @GOTOFF is replaced with a single space. */
+ memcpy (tmpbuf + first + 1, past_got, second);
+ tmpbuf[first + second + 1] = '\0';
+
+ return tmpbuf;
+}
+
+extern void
+parse_cons_expression_microblaze (expressionS *exp, int size)
+{
+ if (size == 4)
+ {
+ /* Handle @GOTOFF et.al. */
+ char *save, *gotfree_copy;
+ int got_len, got_type;
+
+ save = input_line_pointer;
+ gotfree_copy = check_got (& got_type, & got_len);
+ if (gotfree_copy)
+ input_line_pointer = gotfree_copy;
+
+ expression (exp);
+
+ if (gotfree_copy)
+ {
+ exp->X_md = got_type;
+ input_line_pointer = save + (input_line_pointer - gotfree_copy)
+ + got_len;
+ free (gotfree_copy);
+ }
+ }
+ else
+ expression (exp);
+}
+
+/* This is the guts of the machine-dependent assembler. STR points to a
+ machine dependent instruction. This function is supposed to emit
+ the frags/bytes it assembles to. */
+
+static char * str_microblaze_ro_anchor = "RO";
+static char * str_microblaze_rw_anchor = "RW";
+
+static bfd_boolean
+check_spl_reg (unsigned * reg)
+{
+ if ((*reg == REG_MSR) || (*reg == REG_PC)
+ || (*reg == REG_EAR) || (*reg == REG_ESR)
+ || (*reg == REG_FSR) || (*reg == REG_BTR) || (*reg == REG_EDR)
+ || (*reg == REG_PID) || (*reg == REG_ZPR)
+ || (*reg == REG_TLBX) || (*reg == REG_TLBLO)
+ || (*reg == REG_TLBHI) || (*reg == REG_TLBSX)
+ || (*reg == REG_SHR) || (*reg == REG_SLR)
+ || (*reg >= REG_PVR+MIN_PVR_REGNUM && *reg <= REG_PVR+MAX_PVR_REGNUM))
+ return TRUE;
+
+ return FALSE;
+}
+
+/* Here we decide which fixups can be adjusted to make them relative to
+ the beginning of the section instead of the symbol. Basically we need
+ to make sure that the dynamic relocations are done correctly, so in
+ some cases we force the original symbol to be used. */
+
+int
+tc_microblaze_fix_adjustable (struct fix *fixP)
+{
+ if (GOT_symbol && fixP->fx_subsy == GOT_symbol)
+ return 0;
+
+ if (fixP->fx_r_type == BFD_RELOC_MICROBLAZE_64_GOTOFF
+ || fixP->fx_r_type == BFD_RELOC_MICROBLAZE_32_GOTOFF
+ || fixP->fx_r_type == BFD_RELOC_MICROBLAZE_64_GOT
+ || fixP->fx_r_type == BFD_RELOC_MICROBLAZE_64_PLT
+ || fixP->fx_r_type == BFD_RELOC_MICROBLAZE_64_TLSGD
+ || fixP->fx_r_type == BFD_RELOC_MICROBLAZE_64_TLSLD
+ || fixP->fx_r_type == BFD_RELOC_MICROBLAZE_32_TLSDTPMOD
+ || fixP->fx_r_type == BFD_RELOC_MICROBLAZE_32_TLSDTPREL
+ || fixP->fx_r_type == BFD_RELOC_MICROBLAZE_64_TLSDTPREL
+ || fixP->fx_r_type == BFD_RELOC_MICROBLAZE_64_TLSGOTTPREL
+ || fixP->fx_r_type == BFD_RELOC_MICROBLAZE_64_TLSTPREL)
+ return 0;
+
+ return 1;
+}
+
+void
+md_assemble (char * str)
+{
+ char * op_start;
+ char * op_end;
+ struct op_code_struct * opcode, *opcode1;
+ char * output = NULL;
+ int nlen = 0;
+ int i;
+ unsigned long inst, inst1;
+ unsigned reg1;
+ unsigned reg2;
+ unsigned reg3;
+ unsigned isize;
+ unsigned int immed, temp;
+ expressionS exp;
+ char name[20];
+
+ /* Drop leading whitespace. */
+ while (ISSPACE (* str))
+ str ++;
+
+ /* Find the op code end. */
+ for (op_start = op_end = str;
+ *op_end && !is_end_of_line[(unsigned char) *op_end] && *op_end != ' ';
+ op_end++)
+ {
+ name[nlen] = op_start[nlen];
+ nlen++;
+ if (nlen == sizeof (name) - 1)
+ break;
+ }
+
+ name [nlen] = 0;
+
+ if (nlen == 0)
+ {
+ as_bad (_("can't find opcode "));
+ return;
+ }
+
+ opcode = (struct op_code_struct *) hash_find (opcode_hash_control, name);
+ if (opcode == NULL)
+ {
+ as_bad (_("unknown opcode \"%s\""), name);
+ return;
+ }
+
+ inst = opcode->bit_sequence;
+ isize = 4;
+
+ switch (opcode->inst_type)
+ {
+ case INST_TYPE_RD_R1_R2:
+ if (strcmp (op_end, ""))
+ op_end = parse_reg (op_end + 1, &reg1); /* Get rd. */
+ else
+ {
+ as_fatal (_("Error in statement syntax"));
+ reg1 = 0;
+ }
+ if (strcmp (op_end, ""))
+ op_end = parse_reg (op_end + 1, &reg2); /* Get r1. */
+ else
+ {
+ as_fatal (_("Error in statement syntax"));
+ reg2 = 0;
+ }
+ if (strcmp (op_end, ""))
+ op_end = parse_reg (op_end + 1, &reg3); /* Get r2. */
+ else
+ {
+ as_fatal (_("Error in statement syntax"));
+ reg3 = 0;
+ }
+
+ /* Check for spl registers. */
+ if (check_spl_reg (& reg1))
+ as_fatal (_("Cannot use special register with this instruction"));
+ if (check_spl_reg (& reg2))
+ as_fatal (_("Cannot use special register with this instruction"));
+ if (check_spl_reg (& reg3))
+ as_fatal (_("Cannot use special register with this instruction"));
+
+ if (streq (name, "sub"))
+ {
+ /* sub rd, r1, r2 becomes rsub rd, r2, r1. */
+ inst |= (reg1 << RD_LOW) & RD_MASK;
+ inst |= (reg3 << RA_LOW) & RA_MASK;
+ inst |= (reg2 << RB_LOW) & RB_MASK;
+ }
+ else
+ {
+ inst |= (reg1 << RD_LOW) & RD_MASK;
+ inst |= (reg2 << RA_LOW) & RA_MASK;
+ inst |= (reg3 << RB_LOW) & RB_MASK;
+ }
+ output = frag_more (isize);
+ break;
+
+ case INST_TYPE_RD_R1_IMM:
+ if (strcmp (op_end, ""))
+ op_end = parse_reg (op_end + 1, &reg1); /* Get rd. */
+ else
+ {
+ as_fatal (_("Error in statement syntax"));
+ reg1 = 0;
+ }
+ if (strcmp (op_end, ""))
+ op_end = parse_reg (op_end + 1, &reg2); /* Get r1. */
+ else
+ {
+ as_fatal (_("Error in statement syntax"));
+ reg2 = 0;
+ }
+ if (strcmp (op_end, ""))
+ op_end = parse_imm (op_end + 1, & exp, MIN_IMM, MAX_IMM);
+ else
+ as_fatal (_("Error in statement syntax"));
+
+ /* Check for spl registers. */
+ if (check_spl_reg (& reg1))
+ as_fatal (_("Cannot use special register with this instruction"));
+ if (check_spl_reg (& reg2))
+ as_fatal (_("Cannot use special register with this instruction"));
+
+ if (exp.X_op != O_constant)
+ {
+ char *opc;
+ relax_substateT subtype;
+
+ if (streq (name, "lmi"))
+ as_fatal (_("lmi pseudo instruction should not use a label in imm field"));
+ else if (streq (name, "smi"))
+ as_fatal (_("smi pseudo instruction should not use a label in imm field"));
+
+ if (reg2 == REG_ROSDP)
+ opc = str_microblaze_ro_anchor;
+ else if (reg2 == REG_RWSDP)
+ opc = str_microblaze_rw_anchor;
+ else
+ opc = NULL;
+ if (exp.X_md != 0)
+ subtype = get_imm_otype(exp.X_md);
+ else
+ subtype = opcode->inst_offset_type;
+
+ output = frag_var (rs_machine_dependent,
+ isize * 2, /* maxm of 2 words. */
+ isize, /* minm of 1 word. */
+ subtype, /* PC-relative or not. */
+ exp.X_add_symbol,
+ exp.X_add_number,
+ opc);
+ immed = 0;
+ }
+ else
+ {
+ output = frag_more (isize);
+ immed = exp.X_add_number;
+ }
+
+ if (streq (name, "lmi") || streq (name, "smi"))
+ {
+ /* Load/store 32-d consecutive registers. Used on exit/entry
+ to subroutines to save and restore registers to stack.
+ Generate 32-d insts. */
+ int count;
+
+ count = 32 - reg1;
+ if (streq (name, "lmi"))
+ opcode = (struct op_code_struct *) hash_find (opcode_hash_control, "lwi");
+ else
+ opcode = (struct op_code_struct *) hash_find (opcode_hash_control, "swi");
+ if (opcode == NULL)
+ {
+ as_bad (_("unknown opcode \"%s\""), "lwi");
+ return;
+ }
+ inst = opcode->bit_sequence;
+ inst |= (reg1 << RD_LOW) & RD_MASK;
+ inst |= (reg2 << RA_LOW) & RA_MASK;
+ inst |= (immed << IMM_LOW) & IMM_MASK;
+
+ for (i = 0; i < count - 1; i++)
+ {
+ output[0] = INST_BYTE0 (inst);
+ output[1] = INST_BYTE1 (inst);
+ output[2] = INST_BYTE2 (inst);
+ output[3] = INST_BYTE3 (inst);
+ output = frag_more (isize);
+ immed = immed + 4;
+ reg1++;
+ inst = opcode->bit_sequence;
+ inst |= (reg1 << RD_LOW) & RD_MASK;
+ inst |= (reg2 << RA_LOW) & RA_MASK;
+ inst |= (immed << IMM_LOW) & IMM_MASK;
+ }
+ }
+ else
+ {
+ temp = immed & 0xFFFF8000;
+ if ((temp != 0) && (temp != 0xFFFF8000))
+ {
+ /* Needs an immediate inst. */
+ opcode1 = (struct op_code_struct *) hash_find (opcode_hash_control, "imm");
+ if (opcode1 == NULL)
+ {
+ as_bad (_("unknown opcode \"%s\""), "imm");
+ return;
+ }
+
+ inst1 = opcode1->bit_sequence;
+ inst1 |= ((immed & 0xFFFF0000) >> 16) & IMM_MASK;
+ output[0] = INST_BYTE0 (inst1);
+ output[1] = INST_BYTE1 (inst1);
+ output[2] = INST_BYTE2 (inst1);
+ output[3] = INST_BYTE3 (inst1);
+ output = frag_more (isize);
+ }
+ inst |= (reg1 << RD_LOW) & RD_MASK;
+ inst |= (reg2 << RA_LOW) & RA_MASK;
+ inst |= (immed << IMM_LOW) & IMM_MASK;
+ }
+ break;
+
+ case INST_TYPE_RD_R1_IMM5:
+ if (strcmp (op_end, ""))
+ op_end = parse_reg (op_end + 1, &reg1); /* Get rd. */
+ else
+ {
+ as_fatal (_("Error in statement syntax"));
+ reg1 = 0;
+ }
+ if (strcmp (op_end, ""))
+ op_end = parse_reg (op_end + 1, &reg2); /* Get r1. */
+ else
+ {
+ as_fatal (_("Error in statement syntax"));
+ reg2 = 0;
+ }
+ if (strcmp (op_end, ""))
+ op_end = parse_imm (op_end + 1, & exp, MIN_IMM, MAX_IMM);
+ else
+ as_fatal (_("Error in statement syntax"));
+
+ /* Check for spl registers. */
+ if (check_spl_reg (&reg1))
+ as_fatal (_("Cannot use special register with this instruction"));
+ if (check_spl_reg (&reg2))
+ as_fatal (_("Cannot use special register with this instruction"));
+
+ if (exp.X_op != O_constant)
+ as_warn (_("Symbol used as immediate for shift instruction"));
+ else
+ {
+ output = frag_more (isize);
+ immed = exp.X_add_number;
+ }
+
+ if (immed != (immed % 32))
+ {
+ as_warn (_("Shift value > 32. using <value %% 32>"));
+ immed = immed % 32;
+ }
+ inst |= (reg1 << RD_LOW) & RD_MASK;
+ inst |= (reg2 << RA_LOW) & RA_MASK;
+ inst |= (immed << IMM_LOW) & IMM5_MASK;
+ break;
+
+ case INST_TYPE_R1_R2:
+ if (strcmp (op_end, ""))
+ op_end = parse_reg (op_end + 1, &reg1); /* Get r1. */
+ else
+ {
+ as_fatal (_("Error in statement syntax"));
+ reg1 = 0;
+ }
+ if (strcmp (op_end, ""))
+ op_end = parse_reg (op_end + 1, &reg2); /* Get r2. */
+ else
+ {
+ as_fatal (_("Error in statement syntax"));
+ reg2 = 0;
+ }
+
+ /* Check for spl registers. */
+ if (check_spl_reg (& reg1))
+ as_fatal (_("Cannot use special register with this instruction"));
+ if (check_spl_reg (& reg2))
+ as_fatal (_("Cannot use special register with this instruction"));
+
+ inst |= (reg1 << RA_LOW) & RA_MASK;
+ inst |= (reg2 << RB_LOW) & RB_MASK;
+ output = frag_more (isize);
+ break;
+
+ case INST_TYPE_RD_R1:
+ if (strcmp (op_end, ""))
+ op_end = parse_reg (op_end + 1, &reg1); /* Get rd. */
+ else
+ {
+ as_fatal (_("Error in statement syntax"));
+ reg1 = 0;
+ }
+ if (strcmp (op_end, ""))
+ op_end = parse_reg (op_end + 1, &reg2); /* Get r1. */
+ else
+ {
+ as_fatal (_("Error in statement syntax"));
+ reg2 =0;
+ }
+
+ /* Check for spl registers. */
+ if (check_spl_reg (&reg1))
+ as_fatal (_("Cannot use special register with this instruction"));
+ if (check_spl_reg (&reg2))
+ as_fatal (_("Cannot use special register with this instruction"));
+
+ inst |= (reg1 << RD_LOW) & RD_MASK;
+ inst |= (reg2 << RA_LOW) & RA_MASK;
+ output = frag_more (isize);
+ break;
+
+ case INST_TYPE_RD_RFSL:
+ if (strcmp (op_end, ""))
+ op_end = parse_reg (op_end + 1, &reg1); /* Get rd. */
+ else
+ {
+ as_fatal (_("Error in statement syntax"));
+ reg1 = 0;
+ }
+ if (strcmp (op_end, ""))
+ op_end = parse_reg (op_end + 1, &immed); /* Get rfslN. */
+ else
+ {
+ as_fatal (_("Error in statement syntax"));
+ immed = 0;
+ }
+
+ /* Check for spl registers. */
+ if (check_spl_reg (&reg1))
+ as_fatal (_("Cannot use special register with this instruction"));
+
+ inst |= (reg1 << RD_LOW) & RD_MASK;
+ inst |= (immed << IMM_LOW) & RFSL_MASK;
+ output = frag_more (isize);
+ break;
+
+ case INST_TYPE_RD_IMM15:
+ if (strcmp (op_end, ""))
+ op_end = parse_reg (op_end + 1, &reg1); /* Get rd. */
+ else
+ {
+ as_fatal (_("Error in statement syntax"));
+ reg1 = 0;
+ }
+
+ if (strcmp (op_end, ""))
+ op_end = parse_imm (op_end + 1, & exp, MIN_IMM15, MAX_IMM15);
+ else
+ as_fatal (_("Error in statement syntax"));
+
+ /* Check for spl registers. */
+ if (check_spl_reg (&reg1))
+ as_fatal (_("Cannot use special register with this instruction"));
+
+ if (exp.X_op != O_constant)
+ as_fatal (_("Symbol used as immediate value for msrset/msrclr instructions"));
+ else
+ {
+ output = frag_more (isize);
+ immed = exp.X_add_number;
+ }
+ inst |= (reg1 << RD_LOW) & RD_MASK;
+ inst |= (immed << IMM_LOW) & IMM15_MASK;
+ break;
+
+ case INST_TYPE_R1_RFSL:
+ if (strcmp (op_end, ""))
+ op_end = parse_reg (op_end + 1, &reg1); /* Get r1. */
+ else
+ {
+ as_fatal (_("Error in statement syntax"));
+ reg1 = 0;
+ }
+ if (strcmp (op_end, ""))
+ op_end = parse_reg (op_end + 1, &immed); /* Get rfslN. */
+ else
+ {
+ as_fatal (_("Error in statement syntax"));
+ immed = 0;
+ }
+
+ /* Check for spl registers. */
+ if (check_spl_reg (&reg1))
+ as_fatal (_("Cannot use special register with this instruction"));
+
+ inst |= (reg1 << RA_LOW) & RA_MASK;
+ inst |= (immed << IMM_LOW) & RFSL_MASK;
+ output = frag_more (isize);
+ break;
+
+ case INST_TYPE_RFSL:
+ if (strcmp (op_end, ""))
+ op_end = parse_reg (op_end + 1, &immed); /* Get rfslN. */
+ else
+ {
+ as_fatal (_("Error in statement syntax"));
+ immed = 0;
+ }
+ inst |= (immed << IMM_LOW) & RFSL_MASK;
+ output = frag_more (isize);
+ break;
+
+ case INST_TYPE_R1:
+ if (strcmp (op_end, ""))
+ op_end = parse_reg (op_end + 1, &reg1); /* Get r1. */
+ else
+ {
+ as_fatal (_("Error in statement syntax"));
+ reg1 = 0;
+ }
+
+ /* Check for spl registers. */
+ if (check_spl_reg (&reg1))
+ as_fatal (_("Cannot use special register with this instruction"));
+
+ inst |= (reg1 << RA_LOW) & RA_MASK;
+ output = frag_more (isize);
+ break;
+
+ /* For tuqula insn...:) */
+ case INST_TYPE_RD:
+ if (strcmp (op_end, ""))
+ op_end = parse_reg (op_end + 1, &reg1); /* Get rd. */
+ else
+ {
+ as_fatal (_("Error in statement syntax"));
+ reg1 = 0;
+ }
+
+ /* Check for spl registers. */
+ if (check_spl_reg (&reg1))
+ as_fatal (_("Cannot use special register with this instruction"));
+
+ inst |= (reg1 << RD_LOW) & RD_MASK;
+ output = frag_more (isize);
+ break;
+
+ case INST_TYPE_RD_SPECIAL:
+ if (strcmp (op_end, ""))
+ op_end = parse_reg (op_end + 1, &reg1); /* Get rd. */
+ else
+ {
+ as_fatal (_("Error in statement syntax"));
+ reg1 = 0;
+ }
+ if (strcmp (op_end, ""))
+ op_end = parse_reg (op_end + 1, &reg2); /* Get r1. */
+ else
+ {
+ as_fatal (_("Error in statement syntax"));
+ reg2 = 0;
+ }
+
+ if (reg2 == REG_MSR)
+ immed = opcode->immval_mask | REG_MSR_MASK;
+ else if (reg2 == REG_PC)
+ immed = opcode->immval_mask | REG_PC_MASK;
+ else if (reg2 == REG_EAR)
+ immed = opcode->immval_mask | REG_EAR_MASK;
+ else if (reg2 == REG_ESR)
+ immed = opcode->immval_mask | REG_ESR_MASK;
+ else if (reg2 == REG_FSR)
+ immed = opcode->immval_mask | REG_FSR_MASK;
+ else if (reg2 == REG_BTR)
+ immed = opcode->immval_mask | REG_BTR_MASK;
+ else if (reg2 == REG_EDR)
+ immed = opcode->immval_mask | REG_EDR_MASK;
+ else if (reg2 == REG_PID)
+ immed = opcode->immval_mask | REG_PID_MASK;
+ else if (reg2 == REG_ZPR)
+ immed = opcode->immval_mask | REG_ZPR_MASK;
+ else if (reg2 == REG_TLBX)
+ immed = opcode->immval_mask | REG_TLBX_MASK;
+ else if (reg2 == REG_TLBLO)
+ immed = opcode->immval_mask | REG_TLBLO_MASK;
+ else if (reg2 == REG_TLBHI)
+ immed = opcode->immval_mask | REG_TLBHI_MASK;
+ else if (reg2 == REG_SHR)
+ immed = opcode->immval_mask | REG_SHR_MASK;
+ else if (reg2 == REG_SLR)
+ immed = opcode->immval_mask | REG_SLR_MASK;
+ else if (reg2 >= (REG_PVR+MIN_PVR_REGNUM) && reg2 <= (REG_PVR+MAX_PVR_REGNUM))
+ immed = opcode->immval_mask | REG_PVR_MASK | reg2;
+ else
+ as_fatal (_("invalid value for special purpose register"));
+ inst |= (reg1 << RD_LOW) & RD_MASK;
+ inst |= (immed << IMM_LOW) & IMM_MASK;
+ output = frag_more (isize);
+ break;
+
+ case INST_TYPE_SPECIAL_R1:
+ if (strcmp (op_end, ""))
+ op_end = parse_reg (op_end + 1, &reg1); /* Get rd. */
+ else
+ {
+ as_fatal (_("Error in statement syntax"));
+ reg1 = 0;
+ }
+ if (strcmp (op_end, ""))
+ op_end = parse_reg (op_end + 1, &reg2); /* Get r1. */
+ else
+ {
+ as_fatal (_("Error in statement syntax"));
+ reg2 = 0;
+ }
+
+ if (reg1 == REG_MSR)
+ immed = opcode->immval_mask | REG_MSR_MASK;
+ else if (reg1 == REG_PC)
+ immed = opcode->immval_mask | REG_PC_MASK;
+ else if (reg1 == REG_EAR)
+ immed = opcode->immval_mask | REG_EAR_MASK;
+ else if (reg1 == REG_ESR)
+ immed = opcode->immval_mask | REG_ESR_MASK;
+ else if (reg1 == REG_FSR)
+ immed = opcode->immval_mask | REG_FSR_MASK;
+ else if (reg1 == REG_BTR)
+ immed = opcode->immval_mask | REG_BTR_MASK;
+ else if (reg1 == REG_EDR)
+ immed = opcode->immval_mask | REG_EDR_MASK;
+ else if (reg1 == REG_PID)
+ immed = opcode->immval_mask | REG_PID_MASK;
+ else if (reg1 == REG_ZPR)
+ immed = opcode->immval_mask | REG_ZPR_MASK;
+ else if (reg1 == REG_TLBX)
+ immed = opcode->immval_mask | REG_TLBX_MASK;
+ else if (reg1 == REG_TLBLO)
+ immed = opcode->immval_mask | REG_TLBLO_MASK;
+ else if (reg1 == REG_TLBHI)
+ immed = opcode->immval_mask | REG_TLBHI_MASK;
+ else if (reg1 == REG_TLBSX)
+ immed = opcode->immval_mask | REG_TLBSX_MASK;
+ else if (reg1 == REG_SHR)
+ immed = opcode->immval_mask | REG_SHR_MASK;
+ else if (reg1 == REG_SLR)
+ immed = opcode->immval_mask | REG_SLR_MASK;
+ else
+ as_fatal (_("invalid value for special purpose register"));
+ inst |= (reg2 << RA_LOW) & RA_MASK;
+ inst |= (immed << IMM_LOW) & IMM_MASK;
+ output = frag_more (isize);
+ break;
+
+ case INST_TYPE_R1_R2_SPECIAL:
+ if (strcmp (op_end, ""))
+ op_end = parse_reg (op_end + 1, &reg1); /* Get r1. */
+ else
+ {
+ as_fatal (_("Error in statement syntax"));
+ reg1 = 0;
+ }
+ if (strcmp (op_end, ""))
+ op_end = parse_reg (op_end + 1, &reg2); /* Get r2. */
+ else
+ {
+ as_fatal (_("Error in statement syntax"));
+ reg2 =0;
+ }
+
+ /* Check for spl registers. */
+ if (check_spl_reg (&reg1))
+ as_fatal (_("Cannot use special register with this instruction"));
+ if (check_spl_reg (&reg2))
+ as_fatal (_("Cannot use special register with this instruction"));
+
+ /* insn wic ra, rb => wic ra, ra, rb. */
+ inst |= (reg1 << RA_LOW) & RA_MASK;
+ inst |= (reg2 << RB_LOW) & RB_MASK;
+
+ output = frag_more (isize);
+ break;
+
+ case INST_TYPE_RD_R2:
+ if (strcmp (op_end, ""))
+ op_end = parse_reg (op_end + 1, &reg1); /* Get rd. */
+ else
+ {
+ as_fatal (_("Error in statement syntax"));
+ reg1 = 0;
+ }
+ if (strcmp (op_end, ""))
+ op_end = parse_reg (op_end + 1, &reg2); /* Get r2. */
+ else
+ {
+ as_fatal (_("Error in statement syntax"));
+ reg2 = 0;
+ }
+
+ /* Check for spl registers. */
+ if (check_spl_reg (&reg1))
+ as_fatal (_("Cannot use special register with this instruction"));
+ if (check_spl_reg (&reg2))
+ as_fatal (_("Cannot use special register with this instruction"));
+
+ inst |= (reg1 << RD_LOW) & RD_MASK;
+ inst |= (reg2 << RB_LOW) & RB_MASK;
+ output = frag_more (isize);
+ break;
+
+ case INST_TYPE_R1_IMM:
+ if (strcmp (op_end, ""))
+ op_end = parse_reg (op_end + 1, &reg1); /* Get r1. */
+ else
+ {
+ as_fatal (_("Error in statement syntax"));
+ reg1 = 0;
+ }
+ if (strcmp (op_end, ""))
+ op_end = parse_imm (op_end + 1, & exp, MIN_IMM, MAX_IMM);
+ else
+ as_fatal (_("Error in statement syntax"));
+
+ /* Check for spl registers. */
+ if (check_spl_reg (&reg1))
+ as_fatal (_("Cannot use special register with this instruction"));
+
+ if (exp.X_op != O_constant)
+ {
+ char *opc = NULL;
+ relax_substateT subtype;
+
+ if (exp.X_md != 0)
+ subtype = get_imm_otype(exp.X_md);
+ else
+ subtype = opcode->inst_offset_type;
+
+ output = frag_var (rs_machine_dependent,
+ isize * 2, /* maxm of 2 words. */
+ isize, /* minm of 1 word. */
+ subtype, /* PC-relative or not. */
+ exp.X_add_symbol,
+ exp.X_add_number,
+ opc);
+ immed = 0;
+ }
+ else
+ {
+ output = frag_more (isize);
+ immed = exp.X_add_number;
+ }
+
+ temp = immed & 0xFFFF8000;
+ if ((temp != 0) && (temp != 0xFFFF8000))
+ {
+ /* Needs an immediate inst. */
+ opcode1 = (struct op_code_struct *) hash_find (opcode_hash_control, "imm");
+ if (opcode1 == NULL)
+ {
+ as_bad (_("unknown opcode \"%s\""), "imm");
+ return;
+ }
+
+ inst1 = opcode1->bit_sequence;
+ inst1 |= ((immed & 0xFFFF0000) >> 16) & IMM_MASK;
+ output[0] = INST_BYTE0 (inst1);
+ output[1] = INST_BYTE1 (inst1);
+ output[2] = INST_BYTE2 (inst1);
+ output[3] = INST_BYTE3 (inst1);
+ output = frag_more (isize);
+ }
+
+ inst |= (reg1 << RA_LOW) & RA_MASK;
+ inst |= (immed << IMM_LOW) & IMM_MASK;
+ break;
+
+ case INST_TYPE_RD_IMM:
+ if (strcmp (op_end, ""))
+ op_end = parse_reg (op_end + 1, &reg1); /* Get rd. */
+ else
+ {
+ as_fatal (_("Error in statement syntax"));
+ reg1 = 0;
+ }
+ if (strcmp (op_end, ""))
+ op_end = parse_imm (op_end + 1, & exp, MIN_IMM, MAX_IMM);
+ else
+ as_fatal (_("Error in statement syntax"));
+
+ /* Check for spl registers. */
+ if (check_spl_reg (&reg1))
+ as_fatal (_("Cannot use special register with this instruction"));
+
+ if (exp.X_op != O_constant)
+ {
+ char *opc = NULL;
+ relax_substateT subtype;
+
+ if (exp.X_md != 0)
+ subtype = get_imm_otype(exp.X_md);
+ else
+ subtype = opcode->inst_offset_type;
+
+ output = frag_var (rs_machine_dependent,
+ isize * 2, /* maxm of 2 words. */
+ isize, /* minm of 1 word. */
+ subtype, /* PC-relative or not. */
+ exp.X_add_symbol,
+ exp.X_add_number,
+ opc);
+ immed = 0;
+ }
+ else
+ {
+ output = frag_more (isize);
+ immed = exp.X_add_number;
+ }
+
+ temp = immed & 0xFFFF8000;
+ if ((temp != 0) && (temp != 0xFFFF8000))
+ {
+ /* Needs an immediate inst. */
+ opcode1 = (struct op_code_struct *) hash_find (opcode_hash_control, "imm");
+ if (opcode1 == NULL)
+ {
+ as_bad (_("unknown opcode \"%s\""), "imm");
+ return;
+ }
+
+ inst1 = opcode1->bit_sequence;
+ inst1 |= ((immed & 0xFFFF0000) >> 16) & IMM_MASK;
+ output[0] = INST_BYTE0 (inst1);
+ output[1] = INST_BYTE1 (inst1);
+ output[2] = INST_BYTE2 (inst1);
+ output[3] = INST_BYTE3 (inst1);
+ output = frag_more (isize);
+ }
+
+ inst |= (reg1 << RD_LOW) & RD_MASK;
+ inst |= (immed << IMM_LOW) & IMM_MASK;
+ break;
+
+ case INST_TYPE_R2:
+ if (strcmp (op_end, ""))
+ op_end = parse_reg (op_end + 1, &reg2); /* Get r2. */
+ else
+ {
+ as_fatal (_("Error in statement syntax"));
+ reg2 = 0;
+ }
+
+ /* Check for spl registers. */
+ if (check_spl_reg (&reg2))
+ as_fatal (_("Cannot use special register with this instruction"));
+
+ inst |= (reg2 << RB_LOW) & RB_MASK;
+ output = frag_more (isize);
+ break;
+
+ case INST_TYPE_IMM:
+ if (streq (name, "imm"))
+ as_fatal (_("An IMM instruction should not be present in the .s file"));
+
+ op_end = parse_imm (op_end + 1, & exp, MIN_IMM, MAX_IMM);
+
+ if (exp.X_op != O_constant)
+ {
+ char *opc = NULL;
+ relax_substateT subtype;
+
+ if (exp.X_md != 0)
+ subtype = get_imm_otype(exp.X_md);
+ else
+ subtype = opcode->inst_offset_type;
+
+ output = frag_var (rs_machine_dependent,
+ isize * 2, /* maxm of 2 words. */
+ isize, /* minm of 1 word. */
+ subtype, /* PC-relative or not. */
+ exp.X_add_symbol,
+ exp.X_add_number,
+ opc);
+ immed = 0;
+ }
+ else
+ {
+ output = frag_more (isize);
+ immed = exp.X_add_number;
+ }
+
+
+ temp = immed & 0xFFFF8000;
+ if ((temp != 0) && (temp != 0xFFFF8000))
+ {
+ /* Needs an immediate inst. */
+ opcode1 = (struct op_code_struct *) hash_find (opcode_hash_control, "imm");
+ if (opcode1 == NULL)
+ {
+ as_bad (_("unknown opcode \"%s\""), "imm");
+ return;
+ }
+
+ inst1 = opcode1->bit_sequence;
+ inst1 |= ((immed & 0xFFFF0000) >> 16) & IMM_MASK;
+ output[0] = INST_BYTE0 (inst1);
+ output[1] = INST_BYTE1 (inst1);
+ output[2] = INST_BYTE2 (inst1);
+ output[3] = INST_BYTE3 (inst1);
+ output = frag_more (isize);
+ }
+ inst |= (immed << IMM_LOW) & IMM_MASK;
+ break;
+
+ case INST_TYPE_NONE:
+ output = frag_more (isize);
+ break;
+
+ case INST_TYPE_IMM5:
+ if (strcmp(op_end, ""))
+ op_end = parse_imm (op_end + 1, & exp, MIN_IMM5, MAX_IMM5);
+ else
+ as_fatal(_("Error in statement syntax"));
+ if (exp.X_op != O_constant) {
+ as_warn(_("Symbol used as immediate for mbar instruction"));
+ } else {
+ output = frag_more (isize);
+ immed = exp.X_add_number;
+ }
+ if (immed != (immed % 32)) {
+ as_warn(_("Immediate value for mbar > 32. using <value %% 32>"));
+ immed = immed % 32;
+ }
+ inst |= (immed << IMM_MBAR);
+ break;
+
+ default:
+ as_fatal (_("unimplemented opcode \"%s\""), name);
+ }
+
+ /* Drop whitespace after all the operands have been parsed. */
+ while (ISSPACE (* op_end))
+ op_end ++;
+
+ /* Give warning message if the insn has more operands than required. */
+ if (strcmp (op_end, opcode->name) && strcmp (op_end, ""))
+ as_warn (_("ignoring operands: %s "), op_end);
+
+ output[0] = INST_BYTE0 (inst);
+ output[1] = INST_BYTE1 (inst);
+ output[2] = INST_BYTE2 (inst);
+ output[3] = INST_BYTE3 (inst);
+
+#ifdef OBJ_ELF
+ dwarf2_emit_insn (4);
+#endif
+}
+
+symbolS *
+md_undefined_symbol (char * name ATTRIBUTE_UNUSED)
+{
+ return NULL;
+}
+
+/* Various routines to kill one day. */
+/* Equal to MAX_PRECISION in atof-ieee.c */
+#define MAX_LITTLENUMS 6
+
+/* Turn a string in input_line_pointer into a floating point constant of type
+ type, and store the appropriate bytes in *litP. The number of LITTLENUMS
+ emitted is stored in *sizeP. An error message is returned, or NULL on OK.*/
+char *
+md_atof (int type, char * litP, int * sizeP)
+{
+ int prec;
+ LITTLENUM_TYPE words[MAX_LITTLENUMS];
+ int i;
+ char * t;
+
+ switch (type)
+ {
+ case 'f':
+ case 'F':
+ case 's':
+ case 'S':
+ prec = 2;
+ break;
+
+ case 'd':
+ case 'D':
+ case 'r':
+ case 'R':
+ prec = 4;
+ break;
+
+ case 'x':
+ case 'X':
+ prec = 6;
+ break;
+
+ case 'p':
+ case 'P':
+ prec = 6;
+ break;
+
+ default:
+ *sizeP = 0;
+ return _("Bad call to MD_NTOF()");
+ }
+
+ t = atof_ieee (input_line_pointer, type, words);
+
+ if (t)
+ input_line_pointer = t;
+
+ *sizeP = prec * sizeof (LITTLENUM_TYPE);
+
+ if (! target_big_endian)
+ {
+ for (i = prec - 1; i >= 0; i--)
+ {
+ md_number_to_chars (litP, (valueT) words[i],
+ sizeof (LITTLENUM_TYPE));
+ litP += sizeof (LITTLENUM_TYPE);
+ }
+ }
+ else
+ for (i = 0; i < prec; i++)
+ {
+ md_number_to_chars (litP, (valueT) words[i],
+ sizeof (LITTLENUM_TYPE));
+ litP += sizeof (LITTLENUM_TYPE);
+ }
+
+ return NULL;
+}
+
+const char * md_shortopts = "";
+
+struct option md_longopts[] =
+{
+ {"EB", no_argument, NULL, OPTION_EB},
+ {"EL", no_argument, NULL, OPTION_EL},
+ { NULL, no_argument, NULL, 0}
+};
+
+size_t md_longopts_size = sizeof (md_longopts);
+
+int md_short_jump_size;
+
+void
+md_create_short_jump (char * ptr ATTRIBUTE_UNUSED,
+ addressT from_Nddr ATTRIBUTE_UNUSED,
+ addressT to_Nddr ATTRIBUTE_UNUSED,
+ fragS * frag ATTRIBUTE_UNUSED,
+ symbolS * to_symbol ATTRIBUTE_UNUSED)
+{
+ as_fatal (_("failed sanity check: short_jump"));
+}
+
+void
+md_create_long_jump (char * ptr ATTRIBUTE_UNUSED,
+ addressT from_Nddr ATTRIBUTE_UNUSED,
+ addressT to_Nddr ATTRIBUTE_UNUSED,
+ fragS * frag ATTRIBUTE_UNUSED,
+ symbolS * to_symbol ATTRIBUTE_UNUSED)
+{
+ as_fatal (_("failed sanity check: long_jump"));
+}
+
+/* Called after relaxing, change the frags so they know how big they are. */
+
+void
+md_convert_frag (bfd * abfd ATTRIBUTE_UNUSED,
+ segT sec ATTRIBUTE_UNUSED,
+ fragS * fragP)
+{
+ fixS *fixP;
+
+ switch (fragP->fr_subtype)
+ {
+ case UNDEFINED_PC_OFFSET:
+ fix_new (fragP, fragP->fr_fix, INST_WORD_SIZE * 2, fragP->fr_symbol,
+ fragP->fr_offset, TRUE, BFD_RELOC_64_PCREL);
+ fragP->fr_fix += INST_WORD_SIZE * 2;
+ fragP->fr_var = 0;
+ break;
+ case DEFINED_ABS_SEGMENT:
+ if (fragP->fr_symbol == GOT_symbol)
+ fix_new (fragP, fragP->fr_fix, INST_WORD_SIZE * 2, fragP->fr_symbol,
+ fragP->fr_offset, TRUE, BFD_RELOC_MICROBLAZE_64_GOTPC);
+ else
+ fix_new (fragP, fragP->fr_fix, INST_WORD_SIZE * 2, fragP->fr_symbol,
+ fragP->fr_offset, FALSE, BFD_RELOC_64);
+ fragP->fr_fix += INST_WORD_SIZE * 2;
+ fragP->fr_var = 0;
+ break;
+ case DEFINED_RO_SEGMENT:
+ fix_new (fragP, fragP->fr_fix, INST_WORD_SIZE, fragP->fr_symbol,
+ fragP->fr_offset, FALSE, BFD_RELOC_MICROBLAZE_32_ROSDA);
+ fragP->fr_fix += INST_WORD_SIZE;
+ fragP->fr_var = 0;
+ break;
+ case DEFINED_RW_SEGMENT:
+ fix_new (fragP, fragP->fr_fix, INST_WORD_SIZE, fragP->fr_symbol,
+ fragP->fr_offset, FALSE, BFD_RELOC_MICROBLAZE_32_RWSDA);
+ fragP->fr_fix += INST_WORD_SIZE;
+ fragP->fr_var = 0;
+ break;
+ case DEFINED_PC_OFFSET:
+ fix_new (fragP, fragP->fr_fix, INST_WORD_SIZE, fragP->fr_symbol,
+ fragP->fr_offset, TRUE, BFD_RELOC_MICROBLAZE_32_LO_PCREL);
+ fragP->fr_fix += INST_WORD_SIZE;
+ fragP->fr_var = 0;
+ break;
+ case LARGE_DEFINED_PC_OFFSET:
+ fix_new (fragP, fragP->fr_fix, INST_WORD_SIZE * 2, fragP->fr_symbol,
+ fragP->fr_offset, TRUE, BFD_RELOC_64_PCREL);
+ fragP->fr_fix += INST_WORD_SIZE * 2;
+ fragP->fr_var = 0;
+ break;
+ case GOT_OFFSET:
+ fix_new (fragP, fragP->fr_fix, INST_WORD_SIZE * 2, fragP->fr_symbol,
+ fragP->fr_offset, FALSE, BFD_RELOC_MICROBLAZE_64_GOT);
+ fragP->fr_fix += INST_WORD_SIZE * 2;
+ fragP->fr_var = 0;
+ break;
+ case PLT_OFFSET:
+ fixP = fix_new (fragP, fragP->fr_fix, INST_WORD_SIZE * 2, fragP->fr_symbol,
+ fragP->fr_offset, TRUE, BFD_RELOC_MICROBLAZE_64_PLT);
+ /* fixP->fx_plt = 1; */
+ (void) fixP;
+ fragP->fr_fix += INST_WORD_SIZE * 2;
+ fragP->fr_var = 0;
+ break;
+ case GOTOFF_OFFSET:
+ fix_new (fragP, fragP->fr_fix, INST_WORD_SIZE * 2, fragP->fr_symbol,
+ fragP->fr_offset, FALSE, BFD_RELOC_MICROBLAZE_64_GOTOFF);
+ fragP->fr_fix += INST_WORD_SIZE * 2;
+ fragP->fr_var = 0;
+ break;
+ case TLSGD_OFFSET:
+ fix_new (fragP, fragP->fr_fix, INST_WORD_SIZE * 2, fragP->fr_symbol,
+ fragP->fr_offset, FALSE, BFD_RELOC_MICROBLAZE_64_TLSGD);
+ fragP->fr_fix += INST_WORD_SIZE * 2;
+ fragP->fr_var = 0;
+ break;
+ case TLSLD_OFFSET:
+ fix_new (fragP, fragP->fr_fix, INST_WORD_SIZE * 2, fragP->fr_symbol,
+ fragP->fr_offset, FALSE, BFD_RELOC_MICROBLAZE_64_TLSLD);
+ fragP->fr_fix += INST_WORD_SIZE * 2;
+ fragP->fr_var = 0;
+ break;
+ case TLSDTPREL_OFFSET:
+ fix_new (fragP, fragP->fr_fix, INST_WORD_SIZE * 2, fragP->fr_symbol,
+ fragP->fr_offset, FALSE, BFD_RELOC_MICROBLAZE_64_TLSDTPREL);
+ fragP->fr_fix += INST_WORD_SIZE * 2;
+ fragP->fr_var = 0;
+ break;
+
+ default:
+ abort ();
+ }
+}
+
+/* Applies the desired value to the specified location.
+ Also sets up addends for 'rela' type relocations. */
+void
+md_apply_fix (fixS * fixP,
+ valueT * valp,
+ segT segment)
+{
+ char * buf = fixP->fx_where + fixP->fx_frag->fr_literal;
+ char * file = fixP->fx_file ? fixP->fx_file : _("unknown");
+ const char * symname;
+ /* Note: use offsetT because it is signed, valueT is unsigned. */
+ offsetT val = (offsetT) * valp;
+ int i;
+ struct op_code_struct * opcode1;
+ unsigned long inst1;
+
+ symname = fixP->fx_addsy ? S_GET_NAME (fixP->fx_addsy) : _("<unknown>");
+
+ /* fixP->fx_offset is supposed to be set up correctly for all
+ symbol relocations. */
+ if (fixP->fx_addsy == NULL)
+ {
+ if (!fixP->fx_pcrel)
+ fixP->fx_offset = val; /* Absolute relocation. */
+ else
+ fprintf (stderr, "NULL symbol PC-relative relocation? offset = %08x, val = %08x\n",
+ (unsigned int) fixP->fx_offset, (unsigned int) val);
+ }
+
+ /* If we aren't adjusting this fixup to be against the section
+ symbol, we need to adjust the value. */
+ if (fixP->fx_addsy != NULL)
+ {
+ if (S_IS_WEAK (fixP->fx_addsy)
+ || (symbol_used_in_reloc_p (fixP->fx_addsy)
+ && (((bfd_get_section_flags (stdoutput,
+ S_GET_SEGMENT (fixP->fx_addsy))
+ & SEC_LINK_ONCE) != 0)
+ || !strncmp (segment_name (S_GET_SEGMENT (fixP->fx_addsy)),
+ ".gnu.linkonce",
+ sizeof (".gnu.linkonce") - 1))))
+ {
+ val -= S_GET_VALUE (fixP->fx_addsy);
+ if (val != 0 && ! fixP->fx_pcrel)
+ {
+ /* In this case, the bfd_install_relocation routine will
+ incorrectly add the symbol value back in. We just want
+ the addend to appear in the object file.
+ FIXME: If this makes VALUE zero, we're toast. */
+ val -= S_GET_VALUE (fixP->fx_addsy);
+ }
+ }
+ }
+
+ /* If the fix is relative to a symbol which is not defined, or not
+ in the same segment as the fix, we cannot resolve it here. */
+ /* fixP->fx_addsy is NULL if valp contains the entire relocation. */
+ if (fixP->fx_addsy != NULL
+ && (!S_IS_DEFINED (fixP->fx_addsy)
+ || (S_GET_SEGMENT (fixP->fx_addsy) != segment)))
+ {
+ fixP->fx_done = 0;
+#ifdef OBJ_ELF
+ /* For ELF we can just return and let the reloc that will be generated
+ take care of everything. For COFF we still have to insert 'val'
+ into the insn since the addend field will be ignored. */
+ /* return; */
+#endif
+ }
+ /* All fixups in the text section must be handled in the linker. */
+ else if (segment->flags & SEC_CODE)
+ fixP->fx_done = 0;
+ else if (!fixP->fx_pcrel && fixP->fx_addsy != NULL)
+ fixP->fx_done = 0;
+ else
+ fixP->fx_done = 1;
+
+ switch (fixP->fx_r_type)
+ {
+ case BFD_RELOC_MICROBLAZE_32_LO:
+ case BFD_RELOC_MICROBLAZE_32_LO_PCREL:
+ if (target_big_endian)
+ {
+ buf[2] |= ((val >> 8) & 0xff);
+ buf[3] |= (val & 0xff);
+ }
+ else
+ {
+ buf[1] |= ((val >> 8) & 0xff);
+ buf[0] |= (val & 0xff);
+ }
+ break;
+ case BFD_RELOC_MICROBLAZE_32_ROSDA:
+ case BFD_RELOC_MICROBLAZE_32_RWSDA:
+ /* Don't do anything if the symbol is not defined. */
+ if (fixP->fx_addsy == NULL || S_IS_DEFINED (fixP->fx_addsy))
+ {
+ if (((val & 0xFFFF8000) != 0) && ((val & 0xFFFF8000) != 0xFFFF8000))
+ as_bad_where (file, fixP->fx_line,
+ _("pcrel for branch to %s too far (0x%x)"),
+ symname, (int) val);
+ if (target_big_endian)
+ {
+ buf[2] |= ((val >> 8) & 0xff);
+ buf[3] |= (val & 0xff);
+ }
+ else
+ {
+ buf[1] |= ((val >> 8) & 0xff);
+ buf[0] |= (val & 0xff);
+ }
+ }
+ break;
+ case BFD_RELOC_32:
+ case BFD_RELOC_RVA:
+ case BFD_RELOC_32_PCREL:
+ case BFD_RELOC_MICROBLAZE_32_SYM_OP_SYM:
+ /* Don't do anything if the symbol is not defined. */
+ if (fixP->fx_addsy == NULL || S_IS_DEFINED (fixP->fx_addsy))
+ {
+ if (target_big_endian)
+ {
+ buf[0] |= ((val >> 24) & 0xff);
+ buf[1] |= ((val >> 16) & 0xff);
+ buf[2] |= ((val >> 8) & 0xff);
+ buf[3] |= (val & 0xff);
+ }
+ else
+ {
+ buf[3] |= ((val >> 24) & 0xff);
+ buf[2] |= ((val >> 16) & 0xff);
+ buf[1] |= ((val >> 8) & 0xff);
+ buf[0] |= (val & 0xff);
+ }
+ }
+ break;
+ case BFD_RELOC_64_PCREL:
+ case BFD_RELOC_64:
+ /* Add an imm instruction. First save the current instruction. */
+ for (i = 0; i < INST_WORD_SIZE; i++)
+ buf[i + INST_WORD_SIZE] = buf[i];
+
+ /* Generate the imm instruction. */
+ opcode1 = (struct op_code_struct *) hash_find (opcode_hash_control, "imm");
+ if (opcode1 == NULL)
+ {
+ as_bad (_("unknown opcode \"%s\""), "imm");
+ return;
+ }
+
+ inst1 = opcode1->bit_sequence;
+ if (fixP->fx_addsy == NULL || S_IS_DEFINED (fixP->fx_addsy))
+ inst1 |= ((val & 0xFFFF0000) >> 16) & IMM_MASK;
+
+ buf[0] = INST_BYTE0 (inst1);
+ buf[1] = INST_BYTE1 (inst1);
+ buf[2] = INST_BYTE2 (inst1);
+ buf[3] = INST_BYTE3 (inst1);
+
+ /* Add the value only if the symbol is defined. */
+ if (fixP->fx_addsy == NULL || S_IS_DEFINED (fixP->fx_addsy))
+ {
+ if (target_big_endian)
+ {
+ buf[6] |= ((val >> 8) & 0xff);
+ buf[7] |= (val & 0xff);
+ }
+ else
+ {
+ buf[5] |= ((val >> 8) & 0xff);
+ buf[4] |= (val & 0xff);
+ }
+ }
+ break;
+
+ case BFD_RELOC_MICROBLAZE_64_TLSDTPREL:
+ case BFD_RELOC_MICROBLAZE_64_TLSGD:
+ case BFD_RELOC_MICROBLAZE_64_TLSLD:
+ S_SET_THREAD_LOCAL (fixP->fx_addsy);
+
+ case BFD_RELOC_MICROBLAZE_64_GOTPC:
+ case BFD_RELOC_MICROBLAZE_64_GOT:
+ case BFD_RELOC_MICROBLAZE_64_PLT:
+ case BFD_RELOC_MICROBLAZE_64_GOTOFF:
+ /* Add an imm instruction. First save the current instruction. */
+ for (i = 0; i < INST_WORD_SIZE; i++)
+ buf[i + INST_WORD_SIZE] = buf[i];
+
+ /* Generate the imm instruction. */
+ opcode1 = (struct op_code_struct *) hash_find (opcode_hash_control, "imm");
+ if (opcode1 == NULL)
+ {
+ as_bad (_("unknown opcode \"%s\""), "imm");
+ return;
+ }
+
+ inst1 = opcode1->bit_sequence;
+
+ /* We can fixup call to a defined non-global address
+ within the same section only. */
+ buf[0] = INST_BYTE0 (inst1);
+ buf[1] = INST_BYTE1 (inst1);
+ buf[2] = INST_BYTE2 (inst1);
+ buf[3] = INST_BYTE3 (inst1);
+ return;
+
+ default:
+ break;
+ }
+
+ if (fixP->fx_addsy == NULL)
+ {
+ /* This fixup has been resolved. Create a reloc in case the linker
+ moves code around due to relaxing. */
+ if (fixP->fx_r_type == BFD_RELOC_64_PCREL)
+ fixP->fx_r_type = BFD_RELOC_MICROBLAZE_64_NONE;
+ else
+ fixP->fx_r_type = BFD_RELOC_NONE;
+ fixP->fx_addsy = section_symbol (absolute_section);
+ }
+ return;
+}
+
+void
+md_operand (expressionS * expressionP)
+{
+ /* Ignore leading hash symbol, if present. */
+ if (*input_line_pointer == '#')
+ {
+ input_line_pointer ++;
+ expression (expressionP);
+ }
+}
+
+/* Called just before address relaxation, return the length
+ by which a fragment must grow to reach it's destination. */
+
+int
+md_estimate_size_before_relax (fragS * fragP,
+ segT segment_type)
+{
+ sbss_segment = bfd_get_section_by_name (stdoutput, ".sbss");
+ sbss2_segment = bfd_get_section_by_name (stdoutput, ".sbss2");
+ sdata_segment = bfd_get_section_by_name (stdoutput, ".sdata");
+ sdata2_segment = bfd_get_section_by_name (stdoutput, ".sdata2");
+
+ switch (fragP->fr_subtype)
+ {
+ case INST_PC_OFFSET:
+ /* Used to be a PC-relative branch. */
+ if (!fragP->fr_symbol)
+ {
+ /* We know the abs value: Should never happen. */
+ as_bad (_("Absolute PC-relative value in relaxation code. Assembler error....."));
+ abort ();
+ }
+ else if (S_GET_SEGMENT (fragP->fr_symbol) == segment_type &&
+ !S_IS_WEAK (fragP->fr_symbol))
+ {
+ fragP->fr_subtype = DEFINED_PC_OFFSET;
+ /* Don't know now whether we need an imm instruction. */
+ fragP->fr_var = INST_WORD_SIZE;
+ }
+ else if (S_IS_DEFINED (fragP->fr_symbol)
+ && (((S_GET_SEGMENT (fragP->fr_symbol))->flags & SEC_CODE) == 0))
+ {
+ /* Cannot have a PC-relative branch to a diff segment. */
+ as_bad (_("PC relative branch to label %s which is not in the instruction space"),
+ S_GET_NAME (fragP->fr_symbol));
+ fragP->fr_subtype = UNDEFINED_PC_OFFSET;
+ fragP->fr_var = INST_WORD_SIZE*2;
+ }
+ else
+ {
+ fragP->fr_subtype = UNDEFINED_PC_OFFSET;
+ fragP->fr_var = INST_WORD_SIZE*2;
+ }
+ break;
+
+ case INST_NO_OFFSET:
+ /* Used to be a reference to somewhere which was unknown. */
+ if (fragP->fr_symbol)
+ {
+ if (fragP->fr_opcode == NULL)
+ {
+ /* Used as an absolute value. */
+ fragP->fr_subtype = DEFINED_ABS_SEGMENT;
+ /* Variable part does not change. */
+ fragP->fr_var = INST_WORD_SIZE*2;
+ }
+ else if (streq (fragP->fr_opcode, str_microblaze_ro_anchor))
+ {
+ /* It is accessed using the small data read only anchor. */
+ if ((S_GET_SEGMENT (fragP->fr_symbol) == bfd_com_section_ptr)
+ || (S_GET_SEGMENT (fragP->fr_symbol) == sdata2_segment)
+ || (S_GET_SEGMENT (fragP->fr_symbol) == sbss2_segment)
+ || (! S_IS_DEFINED (fragP->fr_symbol)))
+ {
+ fragP->fr_subtype = DEFINED_RO_SEGMENT;
+ fragP->fr_var = INST_WORD_SIZE;
+ }
+ else
+ {
+ /* Variable not in small data read only segment accessed
+ using small data read only anchor. */
+ char *file = fragP->fr_file ? fragP->fr_file : _("unknown");
+
+ as_bad_where (file, fragP->fr_line,
+ _("Variable is accessed using small data read "
+ "only anchor, but it is not in the small data "
+ "read only section"));
+ fragP->fr_subtype = DEFINED_RO_SEGMENT;
+ fragP->fr_var = INST_WORD_SIZE;
+ }
+ }
+ else if (streq (fragP->fr_opcode, str_microblaze_rw_anchor))
+ {
+ if ((S_GET_SEGMENT (fragP->fr_symbol) == bfd_com_section_ptr)
+ || (S_GET_SEGMENT (fragP->fr_symbol) == sdata_segment)
+ || (S_GET_SEGMENT (fragP->fr_symbol) == sbss_segment)
+ || (!S_IS_DEFINED (fragP->fr_symbol)))
+ {
+ /* It is accessed using the small data read write anchor. */
+ fragP->fr_subtype = DEFINED_RW_SEGMENT;
+ fragP->fr_var = INST_WORD_SIZE;
+ }
+ else
+ {
+ char *file = fragP->fr_file ? fragP->fr_file : _("unknown");
+
+ as_bad_where (file, fragP->fr_line,
+ _("Variable is accessed using small data read "
+ "write anchor, but it is not in the small data "
+ "read write section"));
+ fragP->fr_subtype = DEFINED_RW_SEGMENT;
+ fragP->fr_var = INST_WORD_SIZE;
+ }
+ }
+ else
+ {
+ as_bad (_("Incorrect fr_opcode value in frag. Internal error....."));
+ abort ();
+ }
+ }
+ else
+ {
+ /* We know the abs value: Should never happen. */
+ as_bad (_("Absolute value in relaxation code. Assembler error....."));
+ abort ();
+ }
+ break;
+
+ case UNDEFINED_PC_OFFSET:
+ case LARGE_DEFINED_PC_OFFSET:
+ case DEFINED_ABS_SEGMENT:
+ case GOT_OFFSET:
+ case PLT_OFFSET:
+ case GOTOFF_OFFSET:
+ case TLSGD_OFFSET:
+ case TLSLD_OFFSET:
+ case TLSTPREL_OFFSET:
+ case TLSDTPREL_OFFSET:
+ fragP->fr_var = INST_WORD_SIZE*2;
+ break;
+ case DEFINED_RO_SEGMENT:
+ case DEFINED_RW_SEGMENT:
+ case DEFINED_PC_OFFSET:
+ case TLSDTPMOD_OFFSET:
+ fragP->fr_var = INST_WORD_SIZE;
+ break;
+ default:
+ abort ();
+ }
+
+ return fragP->fr_var;
+}
+
+/* Put number into target byte order. */
+
+void
+md_number_to_chars (char * ptr, valueT use, int nbytes)
+{
+ if (target_big_endian)
+ number_to_chars_bigendian (ptr, use, nbytes);
+ else
+ number_to_chars_littleendian (ptr, use, nbytes);
+}
+
+/* Round up a section size to the appropriate boundary. */
+
+valueT
+md_section_align (segT segment ATTRIBUTE_UNUSED, valueT size)
+{
+ return size; /* Byte alignment is fine. */
+}
+
+
+/* The location from which a PC relative jump should be calculated,
+ given a PC relative reloc. */
+
+long
+md_pcrel_from_section (fixS * fixp, segT sec ATTRIBUTE_UNUSED)
+{
+#ifdef OBJ_ELF
+ /* If the symbol is undefined or defined in another section
+ we leave the add number alone for the linker to fix it later.
+ Only account for the PC pre-bump (No PC-pre-bump on the Microblaze). */
+
+ if (fixp->fx_addsy != (symbolS *) NULL
+ && (!S_IS_DEFINED (fixp->fx_addsy)
+ || (S_GET_SEGMENT (fixp->fx_addsy) != sec)))
+ return 0;
+ else
+ {
+ /* The case where we are going to resolve things... */
+ if (fixp->fx_r_type == BFD_RELOC_64_PCREL)
+ return fixp->fx_where + fixp->fx_frag->fr_address + INST_WORD_SIZE;
+ else
+ return fixp->fx_where + fixp->fx_frag->fr_address;
+ }
+#endif
+}
+
+
+#define F(SZ,PCREL) (((SZ) << 1) + (PCREL))
+#define MAP(SZ,PCREL,TYPE) case F (SZ, PCREL): code = (TYPE); break
+
+arelent *
+tc_gen_reloc (asection * section ATTRIBUTE_UNUSED, fixS * fixp)
+{
+ arelent * rel;
+ bfd_reloc_code_real_type code;
+
+ switch (fixp->fx_r_type)
+ {
+ case BFD_RELOC_NONE:
+ case BFD_RELOC_MICROBLAZE_64_NONE:
+ case BFD_RELOC_32:
+ case BFD_RELOC_MICROBLAZE_32_LO:
+ case BFD_RELOC_MICROBLAZE_32_LO_PCREL:
+ case BFD_RELOC_RVA:
+ case BFD_RELOC_64:
+ case BFD_RELOC_64_PCREL:
+ case BFD_RELOC_MICROBLAZE_32_ROSDA:
+ case BFD_RELOC_MICROBLAZE_32_RWSDA:
+ case BFD_RELOC_MICROBLAZE_32_SYM_OP_SYM:
+ case BFD_RELOC_MICROBLAZE_64_GOTPC:
+ case BFD_RELOC_MICROBLAZE_64_GOT:
+ case BFD_RELOC_MICROBLAZE_64_PLT:
+ case BFD_RELOC_MICROBLAZE_64_GOTOFF:
+ case BFD_RELOC_MICROBLAZE_32_GOTOFF:
+ case BFD_RELOC_MICROBLAZE_64_TLSGD:
+ case BFD_RELOC_MICROBLAZE_64_TLSLD:
+ case BFD_RELOC_MICROBLAZE_32_TLSDTPMOD:
+ case BFD_RELOC_MICROBLAZE_32_TLSDTPREL:
+ case BFD_RELOC_MICROBLAZE_64_TLSDTPREL:
+ case BFD_RELOC_MICROBLAZE_64_TLSGOTTPREL:
+ case BFD_RELOC_MICROBLAZE_64_TLSTPREL:
+ code = fixp->fx_r_type;
+ break;
+
+ default:
+ switch (F (fixp->fx_size, fixp->fx_pcrel))
+ {
+ MAP (1, 0, BFD_RELOC_8);
+ MAP (2, 0, BFD_RELOC_16);
+ MAP (4, 0, BFD_RELOC_32);
+ MAP (1, 1, BFD_RELOC_8_PCREL);
+ MAP (2, 1, BFD_RELOC_16_PCREL);
+ MAP (4, 1, BFD_RELOC_32_PCREL);
+ default:
+ code = fixp->fx_r_type;
+ as_bad (_("Can not do %d byte %srelocation"),
+ fixp->fx_size,
+ fixp->fx_pcrel ? _("pc-relative") : "");
+ }
+ break;
+ }
+
+ rel = (arelent *) xmalloc (sizeof (arelent));
+ rel->sym_ptr_ptr = (asymbol **) xmalloc (sizeof (asymbol *));
+
+ if (code == BFD_RELOC_MICROBLAZE_32_SYM_OP_SYM)
+ *rel->sym_ptr_ptr = symbol_get_bfdsym (fixp->fx_subsy);
+ else
+ *rel->sym_ptr_ptr = symbol_get_bfdsym (fixp->fx_addsy);
+
+ rel->address = fixp->fx_frag->fr_address + fixp->fx_where;
+ /* Always pass the addend along! */
+ rel->addend = fixp->fx_offset;
+ rel->howto = bfd_reloc_type_lookup (stdoutput, code);
+
+ if (rel->howto == NULL)
+ {
+ as_bad_where (fixp->fx_file, fixp->fx_line,
+ _("Cannot represent relocation type %s"),
+ bfd_get_reloc_code_name (code));
+
+ /* Set howto to a garbage value so that we can keep going. */
+ rel->howto = bfd_reloc_type_lookup (stdoutput, BFD_RELOC_32);
+ gas_assert (rel->howto != NULL);
+ }
+ return rel;
+}
+
+int
+md_parse_option (int c, char * arg ATTRIBUTE_UNUSED)
+{
+ switch (c)
+ {
+ case OPTION_EB:
+ target_big_endian = 1;
+ break;
+ case OPTION_EL:
+ target_big_endian = 0;
+ break;
+ default:
+ return 0;
+ }
+ return 1;
+}
+
+void
+md_show_usage (FILE * stream ATTRIBUTE_UNUSED)
+{
+ /* fprintf(stream, _("\
+ MicroBlaze options:\n\
+ -noSmall Data in the comm and data sections do not go into the small data section\n")); */
+}
+
+
+/* Create a fixup for a cons expression. If parse_cons_expression_microblaze
+ found a machine specific op in an expression,
+ then we create relocs accordingly. */
+
+void
+cons_fix_new_microblaze (fragS * frag,
+ int where,
+ int size,
+ expressionS *exp)
+{
+
+ bfd_reloc_code_real_type r;
+
+ if ((exp->X_op == O_subtract) && (exp->X_add_symbol) &&
+ (exp->X_op_symbol) && (now_seg != absolute_section) && (size == 4)
+ && (!S_IS_LOCAL (exp->X_op_symbol)))
+ r = BFD_RELOC_MICROBLAZE_32_SYM_OP_SYM;
+ else if (exp->X_md == IMM_GOTOFF && exp->X_op == O_symbol_rva)
+ {
+ exp->X_op = O_symbol;
+ r = BFD_RELOC_MICROBLAZE_32_GOTOFF;
+ }
+ else
+ {
+ switch (size)
+ {
+ case 1:
+ r = BFD_RELOC_8;
+ break;
+ case 2:
+ r = BFD_RELOC_16;
+ break;
+ case 4:
+ r = BFD_RELOC_32;
+ break;
+ case 8:
+ r = BFD_RELOC_64;
+ break;
+ default:
+ as_bad (_("unsupported BFD relocation size %u"), size);
+ r = BFD_RELOC_32;
+ break;
+ }
+ }
+ fix_new_exp (frag, where, size, exp, 0, r);
+}
generated by cgit v1.2.3 (git 2.25.1) at 2024-04-19 21:32:44 +0000