1 files changed, 0 insertions, 209 deletions
diff --git a/binutils-2.24/gas/doc/c-xgate.texi b/binutils-2.24/gas/doc/c-xgate.texi
deleted file mode 100644
index 360554fd..00000000
--- a/binutils-2.24/gas/doc/c-xgate.texi
+++ /dev/null
@@ -1,209 +0,0 @@
-@c Copyright 2012
-@c Free Software Foundation, Inc.
-@c This is part of the GAS manual.
-@c For copying conditions, see the file as.texinfo.
-@ifset GENERIC
-@page
-@node XGATE-Dependent
-@chapter XGATE Dependent Features
-@end ifset
-@ifclear GENERIC
-@node Machine Dependencies
-@chapter XGATE Dependent Features
-@end ifclear
-
-@cindex XGATE support
-@menu
-* XGATE-Opts::                   XGATE Options
-* XGATE-Syntax::                 Syntax
-* XGATE-Directives::             Assembler Directives
-* XGATE-Float::                  Floating Point
-* XGATE-opcodes::                Opcodes
-@end menu
-
-@node XGATE-Opts
-@section XGATE Options
-
-@cindex options, XGATE
-@cindex XGATE options
-The Freescale XGATE version of @code{@value{AS}} has a few machine
-dependent options.
-
-@table @code
-
-@cindex @samp{-mshort}
-@item -mshort
-This option controls the ABI and indicates to use a 16-bit integer ABI.
-It has no effect on the assembled instructions.
-This is the default.
-
-@cindex @samp{-mlong}
-@item -mlong
-This option controls the ABI and indicates to use a 32-bit integer ABI.
-
-@cindex @samp{-mshort-double}
-@item -mshort-double
-This option controls the ABI and indicates to use a 32-bit float ABI.
-This is the default.
-
-@cindex @samp{-mlong-double}
-@item -mlong-double
-This option controls the ABI and indicates to use a 64-bit float ABI.
-
-@cindex @samp{--print-insn-syntax}
-@item --print-insn-syntax
-You can use the @samp{--print-insn-syntax} option to obtain the
-syntax description of the instruction when an error is detected.
-
-@cindex @samp{--print-opcodes}
-@item --print-opcodes
-The @samp{--print-opcodes} option prints the list of all the
-instructions with their syntax. Once the list is printed
-@code{@value{AS}} exits.
-
-@end table
-
-@node XGATE-Syntax
-@section Syntax
-
-@cindex XGATE syntax
-@cindex syntax, XGATE
-
-In XGATE RISC syntax, the instruction name comes first and it may
-be followed by up to three operands. Operands are separated by commas
-(@samp{,}). @code{@value{AS}} will complain if too many operands are specified
-for a given instruction. The same will happen if you specified too few
- operands.
-
-@smallexample
-nop
-ldl  #23
-CMP  R1, R2
-@end smallexample
-
-@cindex line comment character, XGATE
-@cindex XGATE line comment character
-The presence of a @samp{;} character or a @samp{!} character anywhere
-on a line indicates the start of a comment that extends to the end of
-that line.
-
-A @samp{*} or a @samp{#} character at the start of a line also
-introduces a line comment, but these characters do not work elsewhere
-on the line.  If the first character of the line is a @samp{#} then as
-well as starting a comment, the line could also be logical line number
-directive (@pxref{Comments}) or a preprocessor control command
-(@pxref{Preprocessing}).
-
-@cindex line separator, XGATE
-@cindex statement separator, XGATE
-@cindex XGATE line separator
-The XGATE assembler does not currently support a line separator
-character.
-
-@cindex XGATE addressing modes
-@cindex addressing modes, XGATE
-The following addressing modes are understood for XGATE:
-@table @dfn
-@item Inherent
-@samp{}
-
-@item Immediate 3 Bit Wide
-@samp{#@var{number}}
-
-@item Immediate 4 Bit Wide
-@samp{#@var{number}}
-
-@item Immediate 8 Bit Wide
-@samp{#@var{number}}
-
-@item Monadic Addressing
-@samp{@var{reg}}
-
-@item Dyadic Addressing
-@samp{@var{reg}, @var{reg}}
-
-@item Triadic Addressing
-@samp{@var{reg}, @var{reg}, @var{reg}}
-
-@item Relative Addressing 9 Bit Wide
-@samp{*@var{symbol}}
-
-@item Relative Addressing 10 Bit Wide
-@samp{*@var{symbol}}
-
-@item Index Register plus Immediate Offset
-@samp{@var{reg}, (@var{reg}, #@var{number})}
-
-@item Index Register plus Register Offset
-@samp{@var{reg}, @var{reg}, @var{reg}}
-
-@item Index Register plus Register Offset with Post-increment
-@samp{@var{reg}, @var{reg}, @var{reg}+}
-
-@item Index Register plus Register Offset with Pre-decrement
-@samp{@var{reg}, @var{reg}, -@var{reg}}
-
-The register can be either @samp{R0}, @samp{R1}, @samp{R2}, @samp{R3},
-@samp{R4}, @samp{R5}, @samp{R6} or @samp{R7}.
-
-@end table
-
-Convience macro opcodes to deal with 16-bit values have been added.
-
-@table @dfn
-
-@item Immediate 16 Bit Wide
-@samp{#@var{number}}, or @samp{*@var{symbol}}
-
-For example:
-
-@smallexample
-ldw R1, #1024
-ldw R3, timer
-ldw R1, (R1, #0)
-COM R1
-stw R2, (R1, #0)
-@end smallexample
-@end table
-
-@node XGATE-Directives
-@section Assembler Directives
-
-@cindex assembler directives, XGATE
-@cindex XGATE assembler directives
-
-The XGATE version of @code{@value{AS}} have the following
-specific assembler directives:
-
-@node XGATE-Float
-@section Floating Point
-
-@cindex floating point, XGATE
-@cindex XGATE floating point
-Packed decimal (P) format floating literals are not supported(yet).
-
-The floating point formats generated by directives are these.
-
-@table @code
-@cindex @code{float} directive, XGATE
-@item .float
-@code{Single} precision floating point constants.
-
-@cindex @code{double} directive, XGATE
-@item .double
-@code{Double} precision floating point constants.
-
-@cindex @code{extend} directive XGATE
-@cindex @code{ldouble} directive XGATE
-@item .extend
-@itemx .ldouble
-@code{Extended} precision (@code{long double}) floating point constants.
-@end table
-
-@need 2000
-@node XGATE-opcodes
-@section Opcodes
-
-@cindex XGATE opcodes
-@cindex instruction set, XGATE
-