diff options
Diffstat (limited to 'binutils-2.24/gas/config/aout_gnu.h')
| -rw-r--r-- | binutils-2.24/gas/config/aout_gnu.h | 451 |
1 files changed, 0 insertions, 451 deletions
diff --git a/binutils-2.24/gas/config/aout_gnu.h b/binutils-2.24/gas/config/aout_gnu.h deleted file mode 100644 index 99186b90..00000000 --- a/binutils-2.24/gas/config/aout_gnu.h +++ /dev/null @@ -1,451 +0,0 @@ -/* This file is aout_gnu.h - - Copyright 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 2000, 2002, - 2005, 2007 Free Software Foundation, Inc. - - This file is part of GAS, the GNU Assembler. - - GAS is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 3, or (at your option) - any later version. - - GAS is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with GAS; see the file COPYING. If not, write to - the Free Software Foundation, 51 Franklin Street - Fifth Floor, - Boston, MA 02110-1301, USA. */ - -#ifndef __A_OUT_GNU_H__ -#define __A_OUT_GNU_H__ - -/* There are two main flavours of a.out, one which uses the standard - relocations, and one which uses extended relocations. - - Today, the extended reloc uses are - TC_SPARC - - each must define the enum reloc_type - -*/ - -#define USE_EXTENDED_RELOC defined(TC_SPARC) - -#if defined(TC_SPARC) -enum reloc_type - { - RELOC_8, RELOC_16, RELOC_32,/* simple relocations */ - RELOC_DISP8, RELOC_DISP16, RELOC_DISP32, /* pc-rel displacement */ - RELOC_WDISP30, RELOC_WDISP22, - RELOC_HI22, RELOC_22, - RELOC_13, RELOC_LO10, - RELOC_SFA_BASE, RELOC_SFA_OFF13, - RELOC_BASE10, RELOC_BASE13, RELOC_BASE22, /* P.I.C. (base-relative) */ - RELOC_PC10, RELOC_PC22, /* for some sort of pc-rel P.I.C. (?) */ - RELOC_JMP_TBL, /* P.I.C. jump table */ - RELOC_SEGOFF16, /* reputedly for shared libraries somehow */ - RELOC_GLOB_DAT, RELOC_JMP_SLOT, RELOC_RELATIVE, - RELOC_10, RELOC_11, - RELOC_WDISP2_14, - RELOC_WDISP19, - RELOC_HHI22, - RELOC_HLO10, - - /* 29K relocation types */ - RELOC_JUMPTARG, RELOC_CONST, RELOC_CONSTH, - - RELOC_WDISP14, RELOC_WDISP21, - - NO_RELOC - }; - -#endif /* TC_SPARC */ - -#define __GNU_EXEC_MACROS__ - -#ifndef __STRUCT_EXEC_OVERRIDE__ - -/* This is the layout on disk of a Unix V7, Berkeley, SunOS, Vax Ultrix - "struct exec". Don't assume that on this machine, the "struct exec" - will lay out the same sizes or alignments. */ - -struct exec_bytes - { - unsigned char a_info[4]; - unsigned char a_text[4]; - unsigned char a_data[4]; - unsigned char a_bss[4]; - unsigned char a_syms[4]; - unsigned char a_entry[4]; - unsigned char a_trsize[4]; - unsigned char a_drsize[4]; - }; - -/* How big the "struct exec" is on disk */ -#define EXEC_BYTES_SIZE (8 * 4) - -/* This is the layout in memory of a "struct exec" while we process it. */ - -struct exec -{ - unsigned long a_info; /* Use macros N_MAGIC, etc for access */ - unsigned a_text; /* length of text, in bytes */ - unsigned a_data; /* length of data, in bytes */ - unsigned a_bss; /* length of uninitialized data area for file, in bytes */ - unsigned a_syms; /* length of symbol table data in file, in bytes */ - unsigned a_entry; /* start address */ - unsigned a_trsize; /* length of relocation info for text, in bytes */ - unsigned a_drsize; /* length of relocation info for data, in bytes */ -}; - -#endif /* __STRUCT_EXEC_OVERRIDE__ */ - -/* these go in the N_MACHTYPE field */ -/* These symbols could be defined by code from Suns...punt 'em */ -#undef M_UNKNOWN -#undef M_68010 -#undef M_68020 -#undef M_SPARC -enum machine_type - { - M_UNKNOWN = 0, - M_68010 = 1, - M_68020 = 2, - M_SPARC = 3, - /* skip a bunch so we don't run into any of sun's numbers */ - M_386 = 100, - M_29K = 101, - M_RS6000 = 102, /* IBM RS/6000 */ - M_VAX4K_NETBSD = 150, - /* HP/BSD formats */ - M_HP200 = 200, /* hp200 (68010) BSD binary */ - M_HP300 = 300, /* hp300 (68020+68881) BSD binary */ - M_HPUX23 = 0x020C /* hp200/300 HPUX binary */ - }; - -#define N_MAGIC(exec) ((exec).a_info & 0xffff) -#define N_MACHTYPE(exec) ((enum machine_type)(((exec).a_info >> 16) & 0xff)) -#define N_FLAGS(exec) (((exec).a_info >> 24) & 0xff) -#define N_SET_INFO(exec, magic, type, flags) \ - ((exec).a_info = ((magic) & 0xffff) \ - | (((int)(type) & 0xff) << 16) \ - | (((flags) & 0xff) << 24)) -#define N_SET_MAGIC(exec, magic) \ - ((exec).a_info = (((exec).a_info & 0xffff0000) | ((magic) & 0xffff))) - -#define N_SET_MACHTYPE(exec, machtype) \ - ((exec).a_info = \ - ((exec).a_info&0xff00ffff) | ((((int)(machtype))&0xff) << 16)) - -#define N_SET_FLAGS(exec, flags) \ - ((exec).a_info = \ - ((exec).a_info&0x00ffffff) | (((flags) & 0xff) << 24)) - -/* Code indicating object file or impure executable. */ -#ifndef OMAGIC -#define OMAGIC 0407 -#endif -/* Code indicating pure executable. */ -#define NMAGIC 0410 -/* Code indicating demand-paged executable. */ -#define ZMAGIC 0413 - -/* Virtual Address of text segment from the a.out file. For OMAGIC, - (almost always "unlinked .o's" these days), should be zero. - For linked files, should reflect reality if we know it. */ - -#ifndef N_TXTADDR -#define N_TXTADDR(x) (N_MAGIC(x)==OMAGIC? 0 : TEXT_START_ADDR) -#endif - -#ifndef N_BADMAG -#define N_BADMAG(x) (N_MAGIC(x) != OMAGIC \ - && N_MAGIC(x) != NMAGIC \ - && N_MAGIC(x) != ZMAGIC) -#endif - -/* By default, segment size is constant. But on some machines, it can - be a function of the a.out header (e.g. machine type). */ -#ifndef N_SEGSIZE -#define N_SEGSIZE(x) SEGMENT_SIZE -#endif - -/* This complexity is for encapsulated COFF support */ -#ifndef _N_HDROFF -#define _N_HDROFF(x) (N_SEGSIZE(x) - sizeof (struct exec)) -#endif - -#ifndef N_TXTOFF -#define N_TXTOFF(x) (N_MAGIC(x) == ZMAGIC ? \ - _N_HDROFF((x)) + sizeof (struct exec) : \ - sizeof (struct exec)) -#endif - -#ifndef N_DATOFF -#define N_DATOFF(x) ( N_TXTOFF(x) + (x).a_text ) -#endif - -#ifndef N_TRELOFF -#define N_TRELOFF(x) ( N_DATOFF(x) + (x).a_data ) -#endif - -#ifndef N_DRELOFF -#define N_DRELOFF(x) ( N_TRELOFF(x) + (x).a_trsize ) -#endif - -#ifndef N_SYMOFF -#define N_SYMOFF(x) ( N_DRELOFF(x) + (x).a_drsize ) -#endif - -#ifndef N_STROFF -#define N_STROFF(x) ( N_SYMOFF(x) + (x).a_syms ) -#endif - -/* Address of text segment in memory after it is loaded. */ -#ifndef N_TXTADDR -#define N_TXTADDR(x) 0 -#endif - -#ifndef N_DATADDR -#define N_DATADDR(x) \ - (N_MAGIC(x)==OMAGIC? (N_TXTADDR(x)+(x).a_text) \ - : (N_SEGSIZE(x) + ((N_TXTADDR(x)+(x).a_text-1) & ~(N_SEGSIZE(x)-1)))) -#endif - -/* Address of bss segment in memory after it is loaded. */ -#define N_BSSADDR(x) (N_DATADDR(x) + (x).a_data) - -struct nlist - { - union - { - char *n_name; - struct nlist *n_next; - long n_strx; - } - n_un; - unsigned char n_type; - char n_other; - short n_desc; - unsigned long n_value; - }; - -#define N_UNDF 0 -#define N_ABS 2 -#define N_TEXT 4 -#define N_DATA 6 -#define N_BSS 8 -#define N_COMM 0x12 /* common (visible in shared lib commons) */ -#define N_FN 0x1F /* File name of a .o file */ - -/* Note: N_EXT can only usefully be OR-ed with N_UNDF, N_ABS, N_TEXT, - N_DATA, or N_BSS. When the low-order bit of other types is set, - (e.g. N_WARNING versus N_FN), they are two different types. */ -#define N_EXT 1 -#define N_TYPE 036 -#define N_STAB 0340 - -/* The following type indicates the definition of a symbol as being - an indirect reference to another symbol. The other symbol - appears as an undefined reference, immediately following this symbol. - - Indirection is asymmetrical. The other symbol's value will be used - to satisfy requests for the indirect symbol, but not vice versa. - If the other symbol does not have a definition, libraries will - be searched to find a definition. */ - -#define N_INDR 0xa - -/* The following symbols refer to set elements. - All the N_SET[ATDB] symbols with the same name form one set. - Space is allocated for the set in the text section, and each set - element's value is stored into one word of the space. - The first word of the space is the length of the set (number of elements). - - The address of the set is made into an N_SETV symbol - whose name is the same as the name of the set. - This symbol acts like a N_DATA global symbol - in that it can satisfy undefined external references. */ - -/* These appear as input to LD, in a .o file. */ -#define N_SETA 0x14 /* Absolute set element symbol */ -#define N_SETT 0x16 /* Text set element symbol */ -#define N_SETD 0x18 /* Data set element symbol */ -#define N_SETB 0x1A /* Bss set element symbol */ - -/* This is output from LD. */ -#define N_SETV 0x1C /* Pointer to set vector in data area. */ - -/* Warning symbol. The text gives a warning message, the next symbol - in the table will be undefined. When the symbol is referenced, the - message is printed. */ - -#define N_WARNING 0x1e - -/* Weak symbols. These are a GNU extension to the a.out format. The - semantics are those of ELF weak symbols. Weak symbols are always - externally visible. The N_WEAK? values are squeezed into the - available slots. The value of a N_WEAKU symbol is 0. The values - of the other types are the definitions. */ -#define N_WEAKU 0x0d /* Weak undefined symbol. */ -#define N_WEAKA 0x0e /* Weak absolute symbol. */ -#define N_WEAKT 0x0f /* Weak text symbol. */ -#define N_WEAKD 0x10 /* Weak data symbol. */ -#define N_WEAKB 0x11 /* Weak bss symbol. */ - -/* This structure describes a single relocation to be performed. - The text-relocation section of the file is a vector of these structures, - all of which apply to the text section. - Likewise, the data-relocation section applies to the data section. */ - -/* The following enum and struct were borrowed from SunOS's - /usr/include/sun4/a.out.h and extended to handle - other machines. It is currently used on SPARC and AMD 29000. - - reloc_ext_bytes is how it looks on disk. reloc_info_extended is - how we might process it on a native host. */ -#if USE_EXTENDED_RELOC - -struct reloc_ext_bytes - { - unsigned char r_address[4]; - unsigned char r_index[3]; - unsigned char r_bits[1]; - unsigned char r_addend[4]; - }; - -#define RELOC_EXT_BITS_EXTERN_BIG 0x80 -#define RELOC_EXT_BITS_EXTERN_LITTLE 0x01 - -#define RELOC_EXT_BITS_TYPE_BIG 0x1F -#define RELOC_EXT_BITS_TYPE_SH_BIG 0 -#define RELOC_EXT_BITS_TYPE_LITTLE 0xF8 -#define RELOC_EXT_BITS_TYPE_SH_LITTLE 3 - -#define RELOC_EXT_SIZE 12 /* Bytes per relocation entry */ - -struct reloc_info_extended -{ - unsigned long r_address; - unsigned int r_index:24; -# define r_symbolnum r_index - unsigned r_extern:1; - unsigned:2; - /* RS/6000 compiler does not support enum bitfield - enum reloc_type r_type:5; */ - enum reloc_type r_type; - long int r_addend; -}; - -#else - -/* The standard, old-fashioned, Berkeley compatible relocation struct */ - -#ifdef TC_I860 -/* NOTE: three bits max, see struct reloc_info_i860.r_type */ -enum i860_reloc_type - { - NO_RELOC = 0, BRADDR, LOW0, LOW1, LOW2, LOW3, LOW4, SPLIT0, SPLIT1, SPLIT2, RELOC_32, - }; - -typedef enum i860_reloc_type reloc_type; - -/* NOTE: two bits max, see reloc_info_i860.r_type */ -enum highlow_type - { - NO_SPEC = 0, PAIR, HIGH, HIGHADJ, - }; - -struct reloc_info_i860 -{ - unsigned long r_address; - /* - * Using bit fields here is a bad idea because the order is not portable. :-( - */ - unsigned int r_symbolnum:24; - unsigned int r_pcrel:1; - unsigned int r_extern:1; - /* combining the two field simplifies the argument passing in "new_fix()" */ - /* and is compatible with the existing Sparc #ifdef's */ - /* r_type: highlow_type - bits 5,4; reloc_type - bits 3-0 */ - unsigned int r_type:6; - long r_addend; -}; - -#endif /* TC_I860 */ - -struct reloc_std_bytes - { - unsigned char r_address[4]; - unsigned char r_index[3]; - unsigned char r_bits[1]; - }; - -#define RELOC_STD_BITS_PCREL_BIG 0x80 -#define RELOC_STD_BITS_PCREL_LITTLE 0x01 - -#define RELOC_STD_BITS_LENGTH_BIG 0x60 -#define RELOC_STD_BITS_LENGTH_SH_BIG 5 /* To shift to units place */ -#define RELOC_STD_BITS_LENGTH_LITTLE 0x06 -#define RELOC_STD_BITS_LENGTH_SH_LITTLE 1 - -#define RELOC_STD_BITS_EXTERN_BIG 0x10 -#define RELOC_STD_BITS_EXTERN_LITTLE 0x08 - -#define RELOC_STD_BITS_BASEREL_BIG 0x08 -#define RELOC_STD_BITS_BASEREL_LITTLE 0x08 - -#define RELOC_STD_BITS_JMPTABLE_BIG 0x04 -#define RELOC_STD_BITS_JMPTABLE_LITTLE 0x04 - -#define RELOC_STD_BITS_RELATIVE_BIG 0x02 -#define RELOC_STD_BITS_RELATIVE_LITTLE 0x02 - -#define RELOC_STD_SIZE 8 /* Bytes per relocation entry */ - -#endif /* USE_EXTENDED_RELOC */ - -#ifndef CUSTOM_RELOC_FORMAT -struct relocation_info -{ - /* Address (within segment) to be relocated. */ - int r_address; - /* The meaning of r_symbolnum depends on r_extern. */ - unsigned int r_symbolnum:24; - /* Nonzero means value is a pc-relative offset - and it should be relocated for changes in its own address - as well as for changes in the symbol or section specified. */ - unsigned int r_pcrel:1; - /* Length (as exponent of 2) of the field to be relocated. - Thus, a value of 2 indicates 1<<2 bytes. */ - unsigned int r_length:2; - /* 1 => relocate with value of symbol. - r_symbolnum is the index of the symbol - in file's the symbol table. - 0 => relocate with the address of a segment. - r_symbolnum is N_TEXT, N_DATA, N_BSS or N_ABS - (the N_EXT bit may be set also, but signifies nothing). */ - unsigned int r_extern:1; - /* The next three bits are for SunOS shared libraries, and seem to - be undocumented. */ -#ifdef TC_NS32K - unsigned int r_bsr:1; - unsigned int r_disp:2; -#else - unsigned int r_baserel:1; /* Linkage table relative */ - unsigned int r_jmptable:1; /* pc-relative to jump table */ - unsigned int r_relative:1; /* "relative relocation" */ -#endif /* TC_NS32K */ - /* unused */ - unsigned int r_pad:1; /* Padding -- set to zero */ -}; - -#endif /* CUSTOM_RELOC_FORMAT */ - -#endif /* __A_OUT_GNU_H__ */ - -/* end of aout_gnu.h */ |