diff options
Diffstat (limited to 'binutils-2.24/gas/ChangeLog-2008')
| -rw-r--r-- | binutils-2.24/gas/ChangeLog-2008 | 1883 |
1 files changed, 0 insertions, 1883 deletions
diff --git a/binutils-2.24/gas/ChangeLog-2008 b/binutils-2.24/gas/ChangeLog-2008 deleted file mode 100644 index 4c8d66eb..00000000 --- a/binutils-2.24/gas/ChangeLog-2008 +++ /dev/null @@ -1,1883 +0,0 @@ -2008-12-23 Jon Beniston <jon@beniston.com> - - * NEWS: Record that support for LM32 has been added. - * Makefile.am: Add LM32 object files and dependencies. - * Makefile.in: Regenerate. - * configure.in: Indicate LM32 uses cgen. - * configure: Regenerate. - * configure.tgt: Add LM32 target. - * config/tc-lm32.c: New file. - * config/tc-lm32.h: New file. - * doc/Makefile.am: Add c-lm32.texi to CPU_DOCS. - * doc/Makefile.in: Regenerate. - * doc/all.texi: Add LM32 as CPU of interest. - * doc/as.texinfo: Add LM32 dependent features link. - * doc/c-lm32.texi: New file. - -2008-12-23 H.J. Lu <hongjiu.lu@intel.com> - - * config/tc-i386.c (match_template): Changed to return - const template *. Handle i.swap_operand for 3 operands. - (build_vex_prefix): Take const template *. Swap operand for - 2-byte VEX prefix if possible. - (md_assemble): Updated. - (build_modrm_byte): Handle RegMem bit for SSE2AVX. - -2008-12-23 Anatoly Sokolov <aesok@post.ru> - - * config/tc-avr.c (mcu_types): Add attiny87, attiny327, atmega4hvd, - atmega8hvd, atmega16hvb, atmega32hvb, atmega64c1, atmega16m1, - atmega64m1, atmega32u6, atmega128rfa1, at90pwm81, at90scr100, - m3000f, m3000s and m3001b devices. - * doc/c-avr.texi: Likewise. - -2008-12-23 Nick Clifton <nickc@redhat.com> - - * NEWS :Remove mention of STT_IFUNC support. - * config/obj-elf.c (obj_elf_type): Remove STT_IFUNC support. - * doc/as.texinfo: Remove mention of STT_IFUNC support. - -2008-12-21 Hans-Peter Nilsson <hp@axis.com> - - * config/tc-cris.c (s_cris_dtpoff): New function. - (md_pseudo_table): Add "dtpoffd". - -2008-12-20 H.J. Lu <hongjiu.lu@intel.com> - - * config/tc-i386.c (parse_insn): Optimize ".s" handling. - -2008-12-20 H.J. Lu <hongjiu.lu@intel.com> - - * config/tc-i386.c (_i386_insn): Add swap_operand. - (parse_insn): Handle ".s". - (match_template): Handle swap_operand. - - * doc/c-i386.texi: Document .s suffix. - -2008-12-20 Hans-Peter Nilsson <hp@axis.com> - - * config/tc-cris.c (cris_process_instruction): Handle - BFD_RELOC_CRIS_32_IE, in the test whether the relocation fits. - (get_3op_or_dip_prefix_op): Handle TLS/PIC decoration for the - "double indirect" addressing mode. - (cris_get_reloc_suffix): Add entry for :IE for BFD_RELOC_CRIS_32_IE. - (cris_number_to_imm, tc_gen_reloc): Handle BFD_RELOC_CRIS_32_IE. - -2008-12-18 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> - - * configure: Regenerate. - -2008-12-08 H.J. Lu <hongjiu.lu@intel.com> - - * config/tc-i386.c (build_modrm_byte): Remove an extra blank - line. - -2008-12-04 Ben Elliston <bje@au.ibm.com> - - * config/tc-ppc.c (parse_cpu): Remove booke64 support. Update - usage strings. - (ppc_setup_opcodes): Likewise, remove booke64 support. - * doc/c-ppc.texi (PowerPC-Opts): Remove -mbooke32 and -mbooke64. - * doc/as.texinfo (Overview): Likewise. - -2008-12-04 Nick Clifton <nickc@redhat.com> - - * doc/as.texinfo (Type): Reword description of STT_IFUNC type. - -2008-12-03 Nick Clifton <nickc@redhat.com> - - * config/obj-elf.c (obj_elf_type): Add support for STT_IFUNC type. - * doc/as.texinfo: Document new feature. - * NEWS: Mention new feature. - -2008-11-29 Kai Tietz <kai.tietz@onevision.com> - - * config/tc-i386.c (i386_target_format): For coff flavour in TE_PEP - use "pe-i386" for 32-bit. - -2008-11-28 Jakub Jelinek <jakub@redhat.com> - - * Makefile.am (ehopt.o): Add struc-symbol.h. - * Makefile.in: Regenerated. - * ehopt.c: Include struc-symbol.h. - (check_eh_frame): For very small O_constant DW_CFA_advance_loc4 - create correct DW_CFA_advance_loc. Handle O_subtract only - for code alignment factor 1, otherwise handle O_divide or - O_right_shift of O_subtract and O_constant. - (eh_frame_estimate_size_before_relax): Always divide by ca. - (eh_frame_convert_frag): Likewise. - -2008-11-28 John David Anglin <dave.anglin@nrc-cnrc.gc.ca> - - * dw2gencfi.c (output_cfi_insn): Scale DW_CFA_advance_loc1, - DW_CFA_advance_loc2 and DW_CFA_advance_loc4 outputs. - -2008-11-28 Joshua Kinard <kumba@gentoo.org> - - * config/tc-mips.c (hilo_interlocks): Handle CPU_R14000, CPU_R16000. - (mips_cpu_info_table): Add r14000, r16000. - * doc/c-mips.texi: Add entries for 14000, 16000. - -2008-11-27 M R Swami Reddy <MR.Swami.Reddy@nsc.com> - - * config/tc-cr16.h (GLOBAL_OFFSET_TABLE_NAME): Defined - * config/tc-cr16.c (md_pseudo_table): Add "4byte" directive to - md_pseudo_table and accept @c prefix, same as long directive. - (cr16_cons_fix_new): Initialize rtype to BFD_RELOC_UNUSED. - (tc_gen_reloc): Declare a variable of type bfd_reloc_code_real_type - and set it for GOT related relocations. - (md_undefined_symbol): Defined - (process_label_constant): Added checks for GOT/got and cGOT/cGOT - prefixes with constant label and set the appropriate relocation type. - * doc/c-cr16.texi (cr16-operand specifiers): Add got/GOT and cgot/cGOT. - -2008-11-26 DJ Delorie <dj@redhat.com> - - * config/tc-m32c.c (md_pseudo_table): Add support for .loc et al. - -2008-11-25 DJ Delorie <dj@redhat.com> - - * config/tc-m32c.c (md_convert_frag): Fix ADJNZ reloc math. - -2008-11-21 Sterling Augustine <sterling@tensilica.com> - - * config/tc-xtensa.c (check_t1_t2_reads_and_writes): Call - xtensa_state_is_shared_or to allow multiple opcodes within a - single FLIX bundle to write to these special states. - -2008-11-19 Hans-Peter Nilsson <hp@axis.com> - - * config/tc-cris.c (cris_number_to_imm): Apply S_SET_THREAD_LOCAL - on symbols in TLS relocs. - -2008-11-19 Nick Clifton <nickc@redhat.com> - - * doc/fdl.texi: Update to v1.3 - * doc/as.texinfo: Change license to v1.3. - -2008-11-18 Catherine Moore <clm@cm00re.com> - - * config/tc-arm.c (neon_type_mask): Renumber. - (type_chk_of_el_type): Handle F_F16. - (neon_cvt_flavour): Recognize half-precision conversions. - (do_neon_cvt): New shapes NS_QD and - NS_DQ. Encode half-precision conversions. - (do_neon_cvtt): Encode the T bit. - (asm_opcode_insns): vcvt, vcvtt support. - (arm_option_cpu_value): Add neon-fp16 support. - -2008-11-17 Nick Clifton <nickc@redhat.com> - - * as.c (parse_args): Update copyright year. - -2008-11-14 Mat Hostetter <mat@lcs.mit.edu> - - * read.c (emit_expr): Grow frag before filling it so that - dot_value remains valid. - -2008-11-14 Peter Jansen <pwjansen@yahoo.com> - - PR 7026 - * config/tc-arm.c: Ensure that all uses of as_bad have a - formatting string. - -2008-11-12 Hans-Peter Nilsson <hp@axis.com> - - * config/tc-cris.c (cris_number_to_imm): Except for - BFD_RELOC_NONE, always set contents. Where previously this was - skipped, set contents to 0. - - PR gas/7025 - * input-scrub.c (input_scrub_include_sb): Make the position - after the input have defined contents, a 0 character. - - * config/tc-cris.c (cris_relax_frag): Add missing case for - ENCODE_RELAX (STATE_COND_BRANCH_PIC, STATE_DWORD). - - PR gas/7020 - * read.c (read_a_source_file): Rearrange evaluation order when - looking for '=' to avoid conditional on undefined contents of - input_line_pointer[1]. - -2008-11-06 Adam Nemet <anemet@caviumnetworks.com> - - * config/tc-mips.c (COP_INSN): Change logic to always return false - for FP instructions. - -2008-11-06 Chao-ying Fu <fu@mips.com> - - * config/tc-mips.c (validate_mips_insn): Add case '1'. - (mips_ip): Add case '1' to process sync type. - -2008-11-06 Joel Sherrill <joel.sherrill@oarcorp.com> - - * configure.tgt: Add m32c-*-rtems* and m32r-*-rtems*. - -2008-11-04 Sterling Augustine <sterling@tensilica.com> - - * config/tc-xtensa.c (tinsn_check_arguments): Check for multiple - writes to the same register. - -2008-11-04 Sterling Augustine <sterling@tensilica.com> - - * config/tc-xtensa.c (xtensa_j_opcode): New. - (xg_instruction_matches_option_term): Handle "FREEREG" option. - (xg_build_to_insn): Likewise. Update renamed tls_reloc reference. - (md_begin): Initialize xtensa_j_opcode. - (md_assemble): Update renamed tls_reloc reference. Handle "j.l". - (xg_assemble_vliw_tokens): Save free_reg info in the frag. - (tinsn_immed_from_frag): Get free_reg info back out of the frag. - (vinsn_to_insnbuf): Update renamed tls_reloc references. - Distinguish extra argument for "FREEREG" from extra TLS argument. - * config/tc-xtensa.h (struct xtensa_frag_type): Add free_reg field. - * config/xtensa-istack.h (struct tinsn_struct): Rename tls_reloc - field to extra_arg. - * config/xtensa-relax.c (widen_spec_list): Add rules to relax "j.l". - (build_transition): Handle "FREEREG" operand. - * config/xtensa-relax.h (enum op_type): Add OP_FREEREG. - -2008-10-31 Alan Modra <amodra@bigpond.net.au> - - * po/id.po: Update. - -2008-10-24 Maciej W. Rozycki <macro@linux-mips.org> - - * config/tc-mips.c (mips_cpu_info_table): Move the MIPS64r2 - comment so that Broadcom SB-1 cores are in the MIPS64 section. - -2008-10-21 Alan Modra <amodra@bigpond.net.au> - - * config/tc-bfin.c (gencode, allocate): Remove unnecessary cast. - * config/tc-ns32k.c (bit_fix_new): Likewise. - * config/tc-m68k.c (md_begin): Likewise. - * hash.c (hash_insert, hash_jam): Likewise. - * symbols.c (symbol_create, local_symbol_make): Likewise. - * frags.c (frag_alloc): Likewise. - -2008-10-20 Jay Krell <jay.krell@cornell.edu> - - * config/bfin-parse.y: Use C style comments. - * config/tc-bfin.c: Likewise. - * config/tc-m68k.c: Likewise. - * config/tc-mips.c: Likewise. - -2008-10-12 H.J. Lu <hongjiu.lu@intel.com> - - * config/tc-i386.c (processor_type): Moved to tc-i386.h. - (cpu_arch_tune): Make it global. - (cpu_arch_isa): Likewise. - (cpu_arch_isa_flags): Likewise. - (i386_align_code): Check fragP->tc_frag_data.isa, - fragP->tc_frag_data.isa_flags and cpu_arch_tune instead of - cpu_arch_isa, cpu_arch_isa_flags and cpu_arch_tune, - respectively. - - * config/tc-i386.h (processor_type): Moved from tc-i386.c. - (cpu_arch_tune): New. - (cpu_arch_isa): Likewise. - (cpu_arch_isa_flags): Likewise. - (i386_tc_frag_data): Likewise. - (TC_FRAG_TYPE): Likewise. - (TC_FRAG_INIT): Likewise. - -2008-10-09 Bob Wilson <bob.wilson@acm.org> - - * doc/as.texinfo (Pseudo Ops): Swap order of Comm and CFI menu entries. - (Altmacro, Comm, Loc, Loc_mark_labels, List, MRI, PopSection, Sleb128): - Moved into alphabetical order. - -2008-10-09 Bob Wilson <bob.wilson@acm.org> - - * doc/as.texinfo (Dot): Expand no-space-dir conditional to include - a complete sentence. - (Pseudo Ops): Put conditionals around Skip and Space menu entries. - (Line): Remove conditional declaration of Ln node and section here. - Put aout-bout description inside the no-line-dir conditional. - (Skip, Space): Use a separate conditional for each node. - -2008-10-09 Bob Wilson <bob.wilson@acm.org> - - * doc/as.texinfo (Pseudo Ops): Remove no-file-dir conditional around - menu entry for File; remove version-specific .file operands from menu - description. Replace "LNS directives" menu entry with new entries - for "Loc" and "Loc_mark_labels". - (LNS directives): Split into separate nodes for each directive. - (Loc): New node for .loc directive. Mention that this directive - is for DWARF2 and add a missing article. - (Loc_mark_labels): Likewise for .loc_mark_labels. - (File): Change this node to describe both the default version and - the DWARF2 version of .file. Move the no-file-dir conditional to - include only the default version. - -2008-10-09 Eric Botcazou <ebotcazou@adacore.com> - - * dw2gencfi.c (cfi_finish): Deal with md_fix_up_eh_frame. - * config/tc-i386.h (md_fix_up_eh_frame): Define on Solaris. - (i386_solaris_fix_up_eh_frame): Declare. - * config/tc-i386.c (i386_solaris_fix_up_eh_frame): New function. - -2008-10-09 Nick Clifton <nickc@redhat.com> - - PR 6944 - * doc/as.texinfo (Dollar Local Labels): Correct description of - dollar local labels to show that the colon suffix is still - needed. - -2008-10-08 Nick Clifton <nickc@redhat.com> - - * configure.in (ALL_LINGUAS): Add "id". - * configure: Regenerate. - * po/id.po: New Indonesian translation. - -2008-10-07 H.J. Lu <hongjiu.lu@intel.com> - - * read.c (pseudo_set): Don't allow global register symbol only - if TC_GLOBAL_REGISTER_SYMBOL_OK is undefined. - * symbols.c (S_SET_EXTERNAL): Likewise. - - * config/tc-mmix.h (TC_GLOBAL_REGISTER_SYMBOL_OK): Defined. - - * doc/internals.texi: Document TC_GLOBAL_REGISTER_SYMBOL_OK. - -2008-10-06 Bob Wilson <bob.wilson@acm.org> - - * doc/as.texinfo (Local): New description of ELF .local directive. - -2008-10-06 Nick Clifton <nickc@redhat.com> - - PR 6926 - * read.c (get_line_sb): Renamed to get_non_macro_line_sb. - (_find_end_of_line): Add extra parameter indicating if the line is - inside a macro. If it is then do not allow the @ character to be - treated as a line separator character. - (read_a_source): Update use of _find_end_of_line. - (find_end_of_line): Likewise. - (s_irp): Update use of get_line_sb. - (s_macro): Likewise. - (do_repeat): Likewise. - (get_line_sb): New function. Like the old version of get_line_sb - except that it takes an extra parameter indicating whether the - line is inside a macro. - (get_macro_line_sb): New function. - -2008-10-04 Hans-Peter Nilsson <hp@axis.com> - - * config/tc-cris.c: Update all comments regarding explicit relocations - to, besides PIC, also imply TLS or to say "relocation specifier" or - similar. - (RELOC_SUFFIX_CHAR): Rename from PIC_SUFFIX_CHAR. Change all callers. - (cris_get_reloc_suffix): Rename from cris_get_pic_suffix. Change all - callers. Also handle TLS relocs. - (cris_get_specified_reloc_size): Rename from cris_get_pic_reloc_size. - Change all callers. Also handle TLS relocs. - (tls): New constant. - (cris_process_instruction): Check for non-PIC TLS relocations and - adjust message when emitting error message about relocation not - fitting. - (get_autoinc_prefix_or_indir_op): Also check for relocation suffix - when tls is true. - (get_3op_or_dip_prefix_op): Ditto. - (cris_number_to_imm, tc_gen_reloc): Handle TLS relocs like PIC relocs. - -2008-10-03 Kazu Hirata <kazu@codesourcery.com> - - * listing.c (buffer_line): Open the source file with FOPEN_RB. - Manually process line ends. - -2008-09-30 Wesley W. Terpstra <wesley@terpstra.ca> - Nick Clifton <nickc@redhat.com> - - * config/tc-tic4x.c (tic4x_globl): Call S_SET_EXTERNAL as well as - S_SET_STORAGE_CLASS. - -2008-09-30 Wesley W. Terpstra <wesley@terpstra.ca> - Nick Clifton <nickc@redhat.com> - - * coffgen.c (coff_write_symbols): Check to see if a symbol's flags - do not match it class and if necessary update the class. - (null_error_handler): New function. Suppresses the generation of - bfd error messages. - * coff64-rs6000.c (bfd_xcoff_backend_data): Update comment. - -2008-09-30 Alan Modra <amodra@bigpond.net.au> - - * Makefile.am: Run "make dep-am". - * Makefile.in: Regenerate. - -2008-09-29 Nick Clifton <nickc@redhat.com> - - * dw2gencfi.c (output_cfi_insn): Fix typo in invocation of - tc_cfi_emit_pcrel_expr macro. - -2008-09-29 Peter O'Gorman <pogma@thewrittenword.com> - Steve Ellcey <sje@cup.hp.com> - - * configure: Regenerate for new libtool. - * aclocal.m4: Ditto. - * Makefile.in: Ditto. - * doc/Makefile.in: Ditto. - -2008-09-29 Nick Clifton <nickc@redhat.com> - - PR 6878 - * app.c (do_scrub_chars): Only issue warnings about tick - characters detected in symbol strings if hex ticks are supported. - -2008-09-29 Nick Clifton <nickc@redhat.com> - - * dw2gencfi.c (output_cfi_insn): Fix typo in invocation of - tc_cfi_emit_pcrel_expr macro. - -2008-09-28 Daniel Jacobowitz <dan@codesourcery.com> - - * NEWS: Mention .cfi_val_encoded_addr. - -2008-09-26 Eric Botcazou <ebotcazou@adacore.com> - - * Makefile.am (TARG_ENV_HFILES): Add config/te-solaris.h. - * Makefile.in (TARG_ENV_HFILES): Likewise. - * configure.tgt (Solaris targets): Set em=solaris. - * config/te-solaris.h: New file. - -2008-09-26 Jie Zhang <jie.zhang@analog.com> - - * config/bfin-parse.y (asm_1): Fix reduce/reduce conflicts. - -2008-09-24 Richard Henderson <rth@redhat.com> - - * dw2gencfi.c (DWARF2_ADDR_SIZE): Provide default. - (struct cfi_insn_data): Add ea member. - (CFI_val_encoded_addr, dot_cfi_val_encoded_addr): New. - (output_cfi_insn): Handle CFI_val_encoded_addr. - (select_cie_for_fde): Don't match CFI_val_encoded_addr. - * doc/as.texinfo (.cfi_val_encoded_addr): Document. - -2008-09-25 Alan Modra <amodra@bigpond.net.au> - - PR 6913 - * listing.c (print_options): Don't call fprintf without format string. - -2008-09-19 Alan Modra <amodra@bigpond.net.au> - - * write.c (TC_FORCE_RELOCATION_SUB_LOCAL): Heed md_register_arithmetic. - (TC_VALIDATE_FIX_SUB): Likewise. - * config/tc-frv.h (TC_FORCE_RELOCATION_SUB_LOCAL): Likewise. - * config/tc-hppa.h (TC_FORCE_RELOCATION_SUB_LOCAL): Likewise. - * config/tc-mn10300.h (TC_VALIDATE_FIX_SUB): Likewise. - * config/tc-sh.h (TC_VALIDATE_FIX_SUB): Likewise. - (TC_FORCE_RELOCATION_SUB_LOCAL): Likewise. - * config/tc-sh64.h (TC_VALIDATE_FIX_SUB): Likewise. - * config/tc-xtensa.h (TC_VALIDATE_FIX_SUB): Likewise. - * doc/internals.texi (TC_FORCE_RELOCATION_SUB_ABS, - TC_FORCE_RELOCATION_SUB_LOCAL, TC_VALIDATE_FIX_SUB): Show new param. - - * write.c (md_register_arithmetic): Define. - (fixup_segment): Adjust TC_FORCE_RELOCATION_SUB_ABS invocation. - Modify error message when registers involved. - (TC_FORCE_RELOCATION_SUB_ABS): Heed md_register_arithmetic. - * config/tc-sh.h (TC_FORCE_RELOCATION_SUB_ABS): Likewise. - -2008-09-15 Alan Modra <amodra@bigpond.net.au> - - * write.c (install_reloc): Correct EMIT_SECTION_SYMBOLS test. - -2008-09-15 Alan Modra <amodra@bigpond.net.au> - - * config/tc-frv.c (md_apply_fix): Use abs_section_sym for - relocs with no symbol. - * config/tc-mmix.c (md_assemble): Mark fake symbol on - BFD_RELOC_MMIX_BASE_PLUS_OFFSET as OK for use by relocs. - (mmix_md_end): Likewise mark mmix reg contents section symbol. - -2008-09-14 Chris Smith <chris@zxdesign.info> - - * config/tc-z80.c: Opcode generation of ld a,(bc) and ld a,(de) was - broken, as the opcode of ld a,(de) was being emitted for both. - -2008-09-12 Sterling Augustine <sterling@tensilica.com> - - * config/tc-xtensa.c (init_op_placement_info_table): Allow number of - operands equal to MAX_INSN_ARGS. - -2008-09-11 Jan Kratochvil <jan.kratochvil@redhat.com> - - * configure.in: Call AC_SYS_LARGEFILE. - * config.in: Regenerate. - * configure: Regenerate. - -2008-09-09 Peter Bergner <bergner@vnet.ibm.com> - - * config/tc-ppc.c (ppc_setup_opcodes): Simplify POWER4/NOPOWER4 test. - Remove POWER5 and POWER6 tests. - -2008-09-08 John David Anglin <dave.anglin@nrc-cnrc.gc.ca> - - * config/tc-hppa.c (hppa_regname_to_dw2regnum): Add register name to - number support for 32-bit targets. - -2008-09-08 Tristan Gingold <gingold@adacore.com> - - * NEWS: Add a marker for the 2.19 features. - -2008-09-07 John David Anglin <dave.anglin@nrc-cnrc.gc.ca> - - * config/tc-hppa.h (DIFF_EXPR_OK): Define for SOM target. Revise - comment regarding use of difference expressions. - (TC_FORCE_RELOCATION_SUB_LOCAL): Define to 1. - - * dw2gencfi.c (CFI_DIFF_EXPR_OK): Define if not defined. - (dot_cfi_personality): Use CFI_DIFF_EXPR_OK instead of DIFF_EXPR_OK. - (dot_cfi_lsda, output_cie, output_fde): Likewise. - * config/tc-hppa.h (CFI_DIFF_EXPR_OK): Define. - -2008-09-06 Richard Sandiford <rdsandiford@googlemail.com> - - * config/tc-mips.h (DWARF2_FDE_RELOC_SIZE): Define. - -2008-09-03 Nick Clifton <nickc@redhat.com> - - * config/tc-i386.c (pe_lcomm_internal): New function. Allows the - alignment field of the .lcomm directive to be optional. - (pe_lcomm): New function. Pass pe_lcomm_internal to - s_comm_internal. - (md_pseudo_table): Implement .lcomm directive for COFF based - targets. - * doc/c-i386.texi (i386-Directives): New node. Used to document - the .lcomm directive. - -2008-08-30 John David Anglin <dave.anglin@nrc-cnrc.gc.ca> - - * config/tc-hppa.h: Don't define DWARF2_EH_FRAME_READ_ONLY on Linux - and NetBSD. - -2008-08-29 Eric B. Weddington <eric.weddington@atmel.com> - - * config/tc-avr.c (mcu_types): Add atmega16u4. - * doc/c-avr.texi: Likewise. - -2008-08-28 H.J. Lu <hongjiu.lu@intel.com> - - * config/tc-ia64.c (CR_IIB0): New. - (CR_IIB1): Likewise. - (cr): Add cr.iib0 and cr.iib1. - (specify_resource): Handle IA64_RS_CR_IIB and CR_IIB0/CR_IIB1. - -2008-08-28 Jan Beulich <jbeulich@novell.com> - - * config/tc-i386.c (md_assemble): Force number of displacement - operands to zero when processing string instruction. - (i386_index_check): Special-case string instruction operands. Don't - fudge address prefix if there already was a memory operand. Fix - error message to correctly reflect the addressing mode used. - (i386_att_operand): Fix comment. - (i386_intel_operand): Snapshot, clear, and restore base and index - reg for each operand processed. Increment count of memory operands - later. - -2008-08-27 John David Anglin <dave.anglin@nrc-cnrc.gc.ca> - - * config/tc-hppa.c (is_SB_relative): New macro. - (fix_new_hppa): Remove $segrel$ marker. - (cons_fix_new_hppa): Set reloc type R_PARISC_SEGREL32 if expression is - segment relative. - * config/tc-hppa.h (tc_frob_symbol): Check for $segrel$. - -2008-08-27 Jan Beulich <jbeulich@novell.com> - - * config/tc-i386.c (check_string): Use register_prefix for error - message. - (process_operands): Likewise. - -2008-08-26 Mark Mitchell <mark@codesourcery.com> - - * c-arm.texi: Add tutorial on ARM unwinding pseudo ops. - -2008-08-26 Jie Zhang <jie.zhang@analog.com> - - * config/bfin-parse.y (check_macfunc_option): Fix instruction - mode checking. - (asm_1): Check mode for 16-bit multiply instructions. - -2008-08-24 Alan Modra <amodra@bigpond.net.au> - - * configure.in: Update a number of obsolete autoconf macros. - * configure: Regenerate. - * aclocal.m4: Regenerate. - -2008-08-22 Nick Clifton <nickc@redhat.com> - - * config/tc-mcore.c (md_assemble): Increase length of name array - to include terminating NUL. - -2008-08-22 Jie Zhang <jie.zhang@analog.com> - - * config/bfin-lex.l (NUMBER): Protect special `.'. - -2008-08-22 Alan Modra <amodra@bigpond.net.au> - - * symbols.c (symbol_clone): Ensure clones are not external. - -2008-08-22 Alan Modra <amodra@bigpond.net.au> - - * config/tc-hppa.c (md_begin): Set BSF_KEEP for "dummy_symbol". - -2008-08-21 Richard Henderson <rth@redhat.com> - - * dw2gencfi.c (DWARF2_FDE_RELOC_SIZE): New. - (output_cie, output_fde): Use it. - (DWARF2_EH_FRAME_READ_ONLY): New. - (cfi_finish): Use it. - - * config/tc-hppa.h (DWARF2_FDE_RELOC_SIZE): Set to 8 for 64-bit. - (DWARF2_CIE_DATA_ALIGNMENT): Change sign. - (DWARF2_EH_FRAME_READ_ONLY): New. - * config/tc-hppa.c (tc_gen_reloc): Generate pc-relative relocations - from the results of DIFF_EXPR_OK manipulation. - -2008-08-21 Sterling Augustine <sterling@tensilica.com> - - * config/xtensa-istack.h (MAX_INSN_ARGS): Increase to 64. - -2008-08-20 Bob Wilson <bob.wilson@acm.org> - - * config/tc-xtensa.c (O_tlsfunc, O_tlsarg, O_tlscall): Define. - (O_tpoff, O_dtpoff): Define. - (suffix_relocs): Add entries for TLS suffixes. - (xtensa_elf_cons): Check for invalid use of TLS relocations. - (map_operator_to_reloc): Add is_literal parameter and use it to - control translating TLS instruction relocations to the corresponding - literal relocations. - (xg_valid_literal_expression): Allow TLS operators. - (xg_build_to_insn): Copy TLS operators from pseudo-instruction - operands to generated literals. - (xg_assemble_literal): Handle TLS operators. Update call to - map_operator_to_reloc. - (md_assemble): Handle CALLXn.TLS pseudo-instruction. - (md_apply_fix): Handle TLS relocations. - (emit_single_op): Handle TLS operators. - (convert_frag_immed): Update call to map_operator_to_reloc. - (vinsn_to_insnbuf): Emit relocations for TLS-related instructions. - * config/xtensa-istack.h (tinsn_struct): Add tls_reloc field. - * config/xtensa-relax.c (append_literal_op): Add src_op parameter - to initialize the op_data field of the BuildOp. - (build_transition): Use it here to record the source operand - corresponding to a generated literal. - * config/xtensa-relax.h (build_op): Comment op_data use for literals. - -2008-08-20 H.J. Lu <hongjiu.lu@intel.com> - - AVX Programming Reference (August, 2008) - * config/tc-i386.c (CPU_FLAGS_AES_MATCH): New. - (CPU_FLAGS_AVX_MATCH): Likewise. - (CPU_FLAGS_32BIT_MATCH): Updated. - (cpu_flags_match): Likewise. - -2008-08-20 Alan Modra <amodra@bigpond.net.au> - - PR 6848 - * write.c (install_reloc): Check that reloc symbols have been - written. - (set_symtab): Mark symbols with BSF_KEEP. - -2008-08-18 H.J. Lu <hongjiu.lu@intel.com> - - * config/tc-i386.c (i386_align_code): Fix a comment typo. - -2008-08-15 Alan Modra <amodra@bigpond.net.au> - - PR 6526 - * configure.in: Invoke AC_USE_SYSTEM_EXTENSIONS. - * Makefile.in: Regenerate. - * aclocal.m4: Regenerate. - * config.in: Regenerate. - * configure: Regenerate. - * doc/Makefile.in: Regenerate. - -2008-08-14 Alan Modra <amodra@bigpond.net.au> - - * config/tc-tic4x.c (tic4x_operands_parse): Make static. - -2008-08-13 Ben Elliston <bje@au.ibm.com> - - * doc/as.texinfo (Align): Document the PowerPC behaviour. - -2008-08-13 Alan Modra <amodra@bigpond.net.au> - - * as.c, as.h, ecoff.c, hash.c, macro.c, symbols.c, config/obj-evax.c, - config/obj-som.c, config/tc-alpha.c, config/tc-arm.c, config/tc-bfin.c, - config/tc-bfin.h, config/tc-crx.c, config/tc-frv.c, config/tc-frv.h, - config/tc-hppa.h, config/tc-i386.c, config/tc-i860.c, config/tc-i960.h, - config/tc-ia64.c, config/tc-ia64.h, config/tc-m32c.c, config/tc-m32c.h, - config/tc-m68k.c, config/tc-maxq.c, config/tc-s390.c, config/tc-s390.h, - config/tc-sparc.c, config/tc-sparc.h, config/tc-spu.c, config/tc-spu.h, - config/tc-tic4x.c, config/tc-tic4x.h, config/tc-tic54x.c, - config/tc-tic54x.h, config/tc-vax.c, doc/internals.texi: Banish PARAMS - and PTR. Convert to ISO C. Delete unnecessary forward declarations. - -2008-08-12 Alan Modra <amodra@bigpond.net.au> - - * config/tc-arm.c (s_unreq): Adjust hash_delete call. - * config/tc-ia64.c (dot_rot): Likewise. - -2008-08-11 Alan Modra <amodra@bigpond.net.au> - - PR 6575 - * hash.c: Expand PTR to void *. - (hash_delete): Add "freeme" parameter. Call obstack_free. - * hash.h: Expand PTR to void *. - (hash_delete): Update prototype. - * macro.c (macro_expand_body): hash_delete LOCALs from formal_hash. - * config/tc-tic54x.c (tic54x_remove_local_label): Update hash_delete - call. - (subsym_substitute): Likewise. - * doc/internals.texi (hash_delete): Update. - -2008-08-08 Anatoly Sokolov <aesok@post.ru> - - * config/tc-avr.c (mcu_types): Add avr25, avr31, avr35, and avr51 - architectures. Reorganize list to put mcu types in correct - architectures and to order list same as in GCC. Use new ISA - definitions in include/opcode/avr.h. - * doc/c-avr.texi: Add avr25, avr31, avr35, and avr51 architecture - descriptions. Reorganize descriptions to put mcu types in correct - architectures and to order lists same as in GCC. - -2008-08-08 Richard Sandiford <rdsandiford@googlemail.com> - Daniel Jacobowitz <dan@codesourcery.com> - - * config/tc-mips.c (OPTION_CALL_NONPIC): New macro. - (OPTION_NON_SHARED, OPTION_XGOT, OPTION_MABI, OPTION_32) - (OPTION_N32, OPTION_64, OPTION_MDEBUG, OPTION_NO_MDEBUG) - (OPTION_PDR, OPTION_NO_PDR, OPTION_MVXWORKS_PIC): Bump by 1. - (md_longopts): Add -call_nonpic. - (md_parse_option): Handle OPTION_CALL_NONPIC. - (md_show_usage): Add -call_nonpic. - -2008-08-08 Sterling Augustine <sterling@tensilica.com> - - * config/tc-xtensa.c (exclude_section_from_property_tables): New. - (xtensa_create_property_segments): Use it. - (xtensa_create_xproperty_segments): Likewise. - -2008-08-08 Alan Modra <amodra@bigpond.net.au> - - * doc/internals.texi (DWARF2_FORMAT): Update for 2008-08-04 change. - -2008-08-06 Richard Sandiford <rdsandiford@googlemail.com> - - * config/tc-mips.c (mips16_reloc_p, got16_reloc_p, hi16_reloc_p) - (lo16_reloc_p): New functions. - (reloc_needs_lo_p): Use hi16_reloc_p and got16_reloc_p to - generalize relocation checks. - (matching_lo_reloc): New function. - (fixup_has_matching_lo_p): Use it. - (mips16_mark_labels): Don't clobber a symbol's visibility. - (append_insn): Use hi16_reloc_p and lo16_reloc_p. - (mips16_ip): Handle BFD_RELOC_MIPS16_GOT16 and BFD_RELOC_MIPS16_CALL16. - (md_apply_fix): Likewise. - (mips16_percent_op): Add %got and %call16. - (mips_frob_file): Use got16_reloc_p to generalize relocation checks. - Use matching_lo_reloc. - (mips_force_relocation): Use hi16_reloc_p and lo16_reloc_p to - generalize relocation checks. - (mips_fix_adjustable): Use lo16_reloc_p to generalize relocation - checks. - -2008-08-06 DJ Delorie <dj@redhat.com> - - * NEWS: Mention these changes. - - * config/tc-h8300.h (H_TICK_HEX): Define. - * config/tc-h8300.c (OPTION_H_TICK_HEX): New. - (md_longopts): Add "-h-tick-hex". - (md_parse_option): Support it. - * doc/c-h8300.texi (H8/300 Options): Document it. - * doc/as.texinfo (Overview): Likewise. - - * config/tc-sh.h (H_TICK_HEX): Define. - * config/tc-sh.c (OPTION_H_TICK_HEX): New. - (md_longopts): Add "-h-tick-hex". - (md_parse_option): Support it. - * doc/c-sh.texi (SH Options): Document it. - * doc/c-sh64.texi (SH64 Options): Document it. - * doc/as.texinfo (Overview): Likewise. - -2008-08-05 Alan Modra <amodra@bigpond.net.au> - - PR gas/6656 - * dwarf2dbg.c (dwarf2_directive_file): Disable gas generated - debug info if we see compiler generated debug info. - (dwarf2_directive_loc): Likewise. Remove redundant debug_type test. - -2008-08-04 Alan Modra <amodra@bigpond.net.au> - - * dwarf2dbg.c: Remove superfluous forward function declarations. - (DWARF2_FORMAT): Add section arg. - (out_header): New function, split out from.. - (out_debug_line): ..here. - (out_debug_aranges): Use out_header. - (out_debug_abbrev): Add info_seg and line_seg args. Use - DW_FORM_data8 (for DW_AT_stmt_list) if line_seg is 64-bit. - (out_debug_info): Use out_header. Output 8 byte DW_AT_stmt_list - if line_seg is 64-bit. - (dwarf2_finish): Adjust out_debug_abbrev call. - * config/tc-mips.h (DWARF2_FORMAT, mips_dwarf2_format): Add sec arg. - * config/tc-mips.c (mips_dwarf2_format): Likewise. - -2008-08-04 Alan Modra <amodra@bigpond.net.au> - - * Makefile.am (POTFILES.in): Set LC_ALL=C. - * Makefile.in: Regenerate. - * po/POTFILES.in: Regenerate. - -2008-08-01 Peter Bergner <bergner@vnet.ibm.com> - - * config/tc-ppc.c (parse_cpu): Rename altivec_or_spe to retain_flags. - Handle -mvsx and -mpower7. - (md_show_usage): Document -mpower7 and -mvsx. - * doc/as.texinfo (Target PowerPC): Document -mvsx. - * doc/c-ppc.texi (PowerPC-Opts): Document -mvsx and -mpower7. - -2008-07-31 Peter Bergner <bergner@vnet.ibm.com> - - * config/tc-ppc.c (parse_cpu) <power6>: Accept Altivec instructions. - <cell>: Likewise. - -2008-07-30 Michael J. Eager <eager@eagercon.com> - - * config/tc-ppc.c (parse_cpu): Separate handling of -m403/405. - (md_show_usage): Likewise. - -2008-07-30 Alan Modra <amodra@bigpond.net.au> - - * messages.c, symbols.c, write.c: Silence gcc warnings. - -2008-07-28 Ineiev <ineiev@yahoo.co.uk> - - * config/tc-i386.c (operand_type_check): Warning fix. - -2008-07-26 Michael Eager <eager@eagercon.com> - - * doc/as.texinfo: Add description of single-precision attribute. - -2008-07-24 Jie Zhang <jie.zhang@analog.com> - - * config/bfin-parse.y (asm_1): Error if plain symbol is used - as load/store offset. - -2008-07-22 Chao-ying Fu <fu@mips.com> - - * config/tc-mips.c (mips_ip): Reset s to argsStart. - -2008-07-22 Jie Zhang <jie.zhang@analog.com> - - * config/tc-bfin.c (bfin_gen_loop): Remove loop symbol. - -2008-07-21 DJ Delorie <dj@redhat.com> - - * config/tc-h8300.c (fix_operand_size): Use the default size - specified by the .lbranch/.sbranch pseudos. - -2008-07-18 DJ Delorie <dj@redhat.com> - - * config/tc-m32c.h (H_TICK_HEX): Define. - * config/tc-m32c.c (OPTION_H_TICK_HEX): Define. - (md_longopts): Add support for it. - (md_parse_option): Likewise. - * doc/as.texinfo (Overview): Add new m32c options. - * doc/c-m32c.texi (M32C-Modifiers): Likewise - - * as.h: (enable_h_tick_hex): New. - * app.c (enable_h_tick_hex): New. - (LEX_IS_H): New. - (do_scrub_begin): Mark 'H' and 'h' as special if enable_h_tick_hex. - (do_scrub_chars): If enable_h_tick_hex and 'h', check for H'00 - style hex constants and convert the input stream to 0x00 style. - (do_scrub_chars): If a 'X style character constant is found after - a symbol character (like you're or X'00), warn the user. - -2008-07-10 Richard Sandiford <rdsandiford@googlemail.com> - - * config/tc-mips.c (mips16_mark_labels): Use ELF_ST_SET_MIPS16. - (mips_fix_adjustable): Likewise. - (mips_frob_file_after_relocs): Likewise. - -2008-07-08 Nathan Sidwell <nathan@codesourcery.com> - - * config/tc-m68k.c (m68k_set_cpu, m68k_set_arch): Don't complain - about overriding an earlier setting. - -2008-07-07 Adam Nemet <anemet@caviumnetworks.com> - - * config/tc-mips.c (NO_ISA_COP): New macro. - (COP_INSN): New macro. - (is_opcode_valid): Use them. - (macro) <ld_st>: Use them. Don't accept coprocessor load store - insns based on the ISA if CPU is NO_ISA_COP. - <copz>: Likewise for coprocessor operations. - -2008-07-07 Paul Brook <paul@codesourcery.com> - - * config/tc-arm.c (arm_fix_adjustable): Don't adjust MOVW/MOVT - relocations. - -2008-07-07 Ralf Corsépius <ralf.corsepius@rtems.org> - - * configure.tgt: Add bfin-*-rtems*. - -2008-07-04 Alan Modra <amodra@bigpond.net.au> - - * config/tc-spu.c (md_apply_fix): Handle fully resolved - BFD_RELOC_32_PCREL, BFD_RELOC_SPU_HI16 and BFD_RELOC_SPU_LO16. - -2008-06-25 Peter Bergner <bergner@vnet.ibm.com> - - * config/tc-ppc.c (parse_cpu): Handle -m464. - (md_show_usage): Likewise. - -2008-06-24 Eric B. Weddington <eric.weddington@atmel.com> - - Add support for ATtiny13A. - * config/tc-avr.c (mcu_types): Add attiny13a. - * doc/c-avr.texi: Likewise. - -2008-06-24 Bob Wilson <bob.wilson@acm.org> - Alan Modra <amodra@bigpond.net.au> - - * write.c (relax_segment <rs_org>): Include current stretch - value when calculating whether .org is backwards. - -2008-06-17 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> - - * configure: Regenerate. - -2008-06-17 Nick Clifton <nickc@redhat.com> - - * app.c (do_scrub_chars): Do not UNGET an EOF value. - -2008-06-16 Hans-Peter Nilsson <hp@bitrange.com> - - PR gas/6607 - * config/tc-mmix.c (s_loc): Assume "negative" addresses belong to - text_section. Do the "stepping backwards" test for text_section - using unsigned operands. - -2008-06-13 Peter Bergner <bergner@vnet.ibm.com> - - * config/tc-ppc.c (ppc_cpu): Use ppc_cpu_t typedef. - (ppc_insert_operand): Likewise. - (ppc_machine): Likewise. - * config/tc-ppc.h: #include "opcode/ppc.h" - (struct _ppc_fix_extra <ppc_cpu>): Use ppc_cpu_t typedef. - (ppc_cpu): Update extern decl. - -2008-06-12 Adam Nemet <anemet@caviumnetworks.com> - - * config/tc-mips.c (validate_mips_insn): Handle field descriptors - +x, +X, +p, +P, +s, +S. - (mips_ip): Likewise. - - * config/tc-mips.c (validate_mips_insn): Handle field descriptor +Q. - (mips_ip): Likewise. - (macro_build): Likewise. - (CPU_HAS_SEQ): New macro. - (macro2) <M_SEQ_I, M_SNE_I>: Use it. Emit seq/sne and seqi/snei. - -2008-06-09 Eric B. Weddington <eric.weddington@atmel.com> - - * config/tc-avr.c (mcu_types): Remove support for ATmega32HVB device. - * doc/c-avr.texi: Likewise. - -2008-06-04 Nick Clifton <nickc@redhat.com> - - * app.c (do_scrub_chars): Do not UNGET an EOF value. - -2008-06-03 H.J. Lu <hongjiu.lu@intel.com> - - * config/tc-i386.c (set_sse_check): New. - (md_pseudo_table): Add "sse_check". - -2008-06-03 Paul Brook <paul@codesourcery.com> - - * config/tc-arm.c (do_t_rbit): Populate both rm fields. - -2008-05-30 Nick Clifton <nickc@redhat.com> - - PR 5523 - * config/tc-avr.c (avr_ldi_expression): Do not warn about unknown - relocs here. - -2008-05-29 Maxim Kuvyrkov <maxim@codesourcery.com> - - * config/tc-mips.c (mips_cpu_info_table): Move records for - ST Loongson-2E/2F processors to a better place. - -2008-05-23 H.J. Lu <hongjiu.lu@intel.com> - - PR gas/6518 - * config/tc-i386.c (match_template): Report ambiguous operand - size, not invalid suffix when there is no match in Intel - syntax. - -2008-05-22 Paul Brook <paul@codesourcery.com> - - * config/tc-arm.c (parse_cond): Covert to lowercase before matching. - -2008-05-21 I-Jui Sung <ijsung@gmail.com> - - * config/tc-arm.c (arm_cpus): Add Faraday ARMv4 and ARMv5TE - compatible cores: fa526, fa626, fa626te, fa726te. - * doc/c-arm.texi (ARM Opts): Add -mcpu={fa526, fa626, fa626te, - fa726te} options. - -2008-05-14 Alan Modra <amodra@bigpond.net.au> - - * Makefile.am: Run "make dep-am". - * Makefile.in: Regenerate. - * doc/Makefile.in: Regenerate. - * po/POTFILES.in: Regenerate. - -2008-05-09 Catherine Moore <clm@codesourcery.com> - - * config/tc-mips.c (mips_frob_file): Don't match MIPS16 relocs - with non-MIPS16 relocs. - -2008-05-09 Chao-ying Fu <fu@mips.com> - - * config/tc-mips.c (md_begin): Use strncmp to compare TARGET_OS, in - case that some characters append at the end of the name. - (mips_ip): Likewise. - (s_change_sec): Likewise. - (md_section_align): Likewise. - -2008-05-07 Bob Wilson <bob.wilson@acm.org> - - * config/tc-xtensa.c (xtensa_create_property_segments): Use - xtensa_make_property_section instead of xtensa_get_property_section. - (xtensa_create_xproperty_segments): Likewise. - -2008-05-02 H.J. Lu <hongjiu.lu@intel.com> - - * NEWS: Mention XSAVE, EPT and MOVBE. - - * config/tc-i386.c (cpu_arch): Add .movbe and .ept. - (md_show_usage): Add .movbe and .ept. - - * doc/c-i386.texi: Add movbe and ept to -march=. Document - .movbe and .ept. - -2008-04-29 David S. Miller <davem@davemloft.net> - - * config/tc-sparc.c (v9a_asr_table): Fix order of softint entries. - -2008-04-28 Adam Nemet <anemet@caviumnetworks.com> - - * config/tc-mips.c (file_mips_soft_float, file_mips_single_float): - New statics. - (OPTION_ELF_BASE): Make room for new option macros. - (OPTION_SOFT_FLOAT, OPTION_HARD_FLOAT, OPTION_SINGLE_FLOAT, - OPTION_DOUBLE_FLOAT): New option macros. - (md_longopts): Add msoft-float, mhard-float, msingle-float and - mdouble-float. - (md_parse_option): Handle OPTION_SINGLE_FLOAT, - OPTION_DOUBLE_FLOAT, OPTION_SOFT_FLOAT and OPTION_HARD_FLOAT. - (md_show_usage): Add -msoft-float, -mhard-float, -msingle-float - and -mdouble-float. - (struct mips_set_options): New fields soft_float and single_float. - (mips_opts): Initialized them. Add comment for each field - initializer. - (mips_after_parse_args): Set them based on file_mips_soft_float - and file_mips_single_float. - (s_mipsset): Add support for `.set softfloat', `.set hardfloat', - `.set singlefloat' and `.set doublefloat'. - (is_opcode_valid): New function to invoke OPCODE_IS_MEMBER. - Handle single-float and soft-float instructions here. - (macro_build, mips_ip): Use it instead of OPCODE_IS_MEMBER. - (is_opcode_valid_16): New function. - (mips16_ip): Use it instead of OPCODE_IS_MEMBER. - (macro) <M_LDC1_AB, M_SDC1_AB, M_L_DOB, M_L_DAB, M_S_DAB, - M_S_DOB>: Remove special-casing of r4650. - * doc/c-mips.texi (-march=): Add Octeon. - (MIPS Opts): Document -msoft-float and -mhard-float. Document - -msingle-float and -mdouble-float. - (MIPS floating-point): New section. Document `.set softfloat' and - `.set hardfloat'. Document `.set singlefloat' and `.set - doublefloat'. - -2008-04-25 David S. Miller <davem@davemloft.net> - - * config/tc-sparc.c: Accept 'softint_clear' and 'softint_set' - %asr aliases. - - * doc/c-sparc.texi: Consistently refer to architecture 'versions', - rather than occaisionally 'levels'. Consistently refer to Sun's - UNIX variant as SunOS, every version of Solaris is also SunOS. - Document new 'softint_clear' and 'softint_set' aliases. Clarify - which architecture versions support '%dcr', '%cq', and '%gl'. Add - section on 32-bit/64-bit opcode translations. - -2008-04-23 Mike Frysinger <vapier@gentoo.org> - - * Makefile.am (OBJ_FORMAT_CFILES): Add config/obj-fdpicelf.c. - (OBJ_FORMAT_HFILES): Add config/obj-fdpicelf.h. - (obj-fdpicelf.o): Define. - * Makefile.in: Regenerate. - * configure.tgt: Set bfd_gas to yes when fmt is fdpicelf. - (bfin-*-*): Delete. - (bfin-*-linux-uclibc): New; set fmt to fdpicelf and em to linux. - (bfin-*-uclinux*): New; set fmt to elf and em to linux. - * config/obj-fdpicelf.c: New. - * config/obj-fdpicelf.h: Likewise. - * config/tc-bfin.c (bfin_flags, bfin_pic_flag): Set default based on - the OBJ_FDPIC_ELF define. - (OPTION_NOPIC): Define. - (md_longopts): Add mnopic and mno-fdpic. - (md_parse_option): Handle OPTION_NOPIC. - -2008-04-23 Paolo Bonzini <bonzini@gnu.org> - - * aclocal.m4: Regenerate. - * configure: Regenerate. - -2008-04-23 David S. Miller <davem@davemloft.net> - - * config/tc-sparc.c (v9a_asr_table): Add missing - 'stick' and 'stick_cmpr', and document ordering rules - of table. - (tc_gen_reloc): Accept BFD_RELOC_SPARC_PC22 and - BFD_RELOC_SPARC_PC10. - * doc/c-sparc.texi: New section on Sparc constants. - Add documentation for %stick and %stick_cmpr. - -2008-04-22 David S. Miller <davem@davemloft.net> - - * config/obj-elf.c (obj_elf_section_type): Add prototype - before obj_elf_section_word and add 'warn' arg. - (obj_elf_section_word): Add type pointer arg, and if no #SECTION - is matched, try checking for #SECTION_TYPE. - (obj_elf_section): Adjust for new args. - (obj_elf_type_name): New function. - (obj_elf_type): Call it, and accept STT_foo number strings - in .type statements as output by SunPRO compiler. - -2008-04-22 H.J. Lu <hongjiu.lu@intel.com> - - * config/tc-i386.c (md_assemble): Don't check SSE instructions - if noavx is 0. - -2008-04-18 David S. Miller <davem@davemloft.net> - - * doc/c-sparc.texi: Add syntax section. - -2008-04-18 H.J. Lu <hongjiu.lu@intel.com> - - * config/tc-i386.c (build_modrm_byte): Don't check FMA to swap - REG and NDS for instructions with immediate operand. - -2008-04-18 H.J. Lu <hongjiu.lu@intel.com> - - * config/tc-i386.c (build_modrm_byte): Swap REG and NDS for - FMA. - -2008-04-16 David S. Miller <davem@davemloft.net> - - * config/tc-sparc.c (sparc_ip): Add support for gotdata mnemonics - and relocation generation. - (tc_gen_reloc): Likewise. - -2008-04-15 Andrew Stubbs <andrew.stubbs@st.com> - - * config/tc-sh.c (md_apply_fix): Make sure BFD_RELOC_SH_PCRELIMM8BY4 - relocations are properly aligned, and not negative. - -2008-04-15 Khem Raj <kraj@mvista.com> - - * doc/tc-arm.texi: Fix fnstart and fnend directive names. - -2008-04-14 Edmar Wienskoski <edmar@freescale.com> - - * config/tc-ppc.c (parse_cpu): Handle "e500mc". Extend "e500" to - accept e500mc instructions. - (md_show_usage): Document -me500mc. - -2008-04-11 Nick Clifton <nickc@redhat.com> - - * listing.c (print_timestamp): Use localtime rather than - localtime_r since not all build environments provide the latter. - -2008-04-10 H.J. Lu <hongjiu.lu@intel.com> - - * NEWS: Mention -msse-check=[none|error|warning]. - - * config/tc-i386.c (sse_check): New. - (OPTION_MSSE_CHECK): Likewise. - (md_assemble): Check SSE instructions if needed. - (md_longopts): Add -msse-check. - (md_parse_option): Handle OPTION_MSSE_CHECK. - (md_show_usage): Show -msse-check=[none|error|warning]. - - * doc/c-i386.texi: Document -msse-check=[none|error|warning]. - -2008-04-10 Santiago Urueña <suruena@gmail.com> - - * listing.c: Add -ag listing flag to show general information in - listings such as gas version, passed options, and time stamp. - (listing_general_info): New function. - (print_options): New function. - (print_single_option): New function. - (print_timestamp): New function. - (MAX_DATELEN): Define. - (listing_print): Add call to listing_general_info. - * listing.h (LISTING_GENERAL): Define. - (listing_print): Add new parameter. - * as.c (show_usage): Print new switch. - (parse_args): Parse new switch. - (main): Pass command line on to listing_print. - * NEWS: Mention this new feature. - * doc/as.texinfo: Document the new sub-option. - -2008-04-08 Alan Modra <amodra@bigpond.net.au> - - * dwarf2dbg.c (dwarf2_emit_insn): Simplify test before dwarf2_where - call. Delete out of date comment. - (dwarf2_consume_line_info): Always clear dwarf2_loc_directive_seen. - (dwarf2_emit_label): Don't emit unless there has been a previous - .file or we are outputting assembler generated debug. - dwarf2_consume_line_info after emitting line info, not before. - (out_debug_info): Simplify files_in_use test. - -2008-04-07 H.J. Lu <hongjiu.lu@intel.com> - - * config/tc-i386.c (parse_real_register): Return AVX register - only if AVX is enabled. - -2008-04-07 Kaz Kojima <kkojima@rr.iij4u.or.jp> - - PR gas/6043 - * config/tc-sh64.c (shmedia_md_pcrel_from_section): Use - md_pcrel_from_section for BFD_RELOC_64 and BFD_RELOC_64_PCREL. - -2008-04-04 Adrian Bunk <bunk@stusta.de> - Bob Wilson <bob.wilson@acm.org> - - * config/tc-xtensa.c (xg_apply_fix_value): Check return code from - call to decode_reloc. - -2008-04-04 H.J. Lu <hongjiu.lu@intel.com> - - * NEWS: Mention XSAVE. Change CLMUL to PCLMUL. - - * config/tc-i386.c (cpu_arch): Add .pclmul. - (md_show_usage): Replace clmul with pclmul. - * doc/c-i386.texi: Likewise. - -2008-04-03 H.J. Lu <hongjiu.lu@intel.com> - - * NEWS: Mention AES, CLMUL, AVX/FMA and -msse2avx. - - * doc/c-i386.texi: Add avx, aes, clmul and fma to -march=. - Document -msse2avx, .avx, .aes, .clmul and .fma. - - * config/tc-i386.c (YMMWORD_MNEM_SUFFIX): New. - (vex_prefix): Likewise. - (sse2avx): Likewise. - (CPU_FLAGS_ARCH_MATCH): Likewise. - (CPU_FLAGS_64BIT_MATCH): Likewise. - (CPU_FLAGS_32BIT_MATCH): Likewise. - (CPU_FLAGS_PERFECT_MATCH): Likewise. - (regymm): Likewise. - (vex_imm4): Likewise. - (fits_in_imm4): Likewise. - (build_vex_prefix): Likewise. - (VEX_check_operands): Likewise. - (bad_implicit_operand): Likewise. - (OPTION_MSSE2AVX): Likewise. - (T_YMMWORD): Likewise. - (_i386_insn): Add vex. - (cpu_arch): Add .avx, .aes, .clmul and .fma. - (cpu_flags_match): Changed to take a pointer to const template. - Enable encoding SSE instructions with VEX prefix for -msse2avx. - (match_mem_size): Also check ymmword. - (operand_type_match): Clear ymmword. - (md_begin): Allow '_' in mnemonic. - (type_names): Add OPERAND_TYPE_VEX_IMM4. - (process_immext): Update assert. - (md_assemble): Don't call process_immext if sse2avx and immext - are true. Call build_vex_prefix if vex is true. - (parse_insn): Updated for cpu_flags_match. - (swap_operands): Handle 5 operands. - (match_template): Handle 5 operands. Updated for cpu_flags_match. - Check regymm. Call VEX_check_operands. Handle YMMWORD_MNEM_SUFFIX. - (process_suffix): Handle YMMWORD_MNEM_SUFFIX. - (check_byte_reg): Check regymm. - (process_operands): Duplicate the destination register for - -msse2avx if needed. - (build_modrm_byte): Updated for instructions with VEX encoding. - (output_insn): Output VEX prefix if needed. - (md_longopts): Add msse2avx. - (md_parse_option): Handle OPTION_MSSE2AVX. - (md_show_usage): Add avx, aes, clmul, fma and -msse2avx. - (intel_e09): Support YMMWORD. - (intel_e11): Likewise. - (intel_get_token): Likewise. - -2008-03-28 Eric B. Weddington <eric.weddington@atmel.com> - - * config/tc-avr.c (mcu_types): Add attiny167. - * doc/c-avr.texi: Likewise. - -2008-03-28 Eric B. Weddington <eric.weddington@atmel.com> - - * config/tc-avr.c (mcu_types): Add atmega32u4. - * doc/c-avr.texi: Likewise. - -2008-03-28 Eric B. Weddington <eric.weddington@atmel.com> - - * config/tc-avr.c (mcu_types): Add atmega32c1. - * doc/c-avr.texi: Likewise. - -2008-03-28 Paul Brook <paul@codesourcery.com> - - * config/tc-arm.c (parse_neon_mov): Parse register before immediate - to avoid spurious symbols. - -2008-03-28 Nathan Sidwell <nathan@codesourcery.com> - - * config/tc-m68k.c (md_convert_frag_1): Replace as_fatal with - as_bad_where. - -2008-03-27 Eric B. Weddington <eric.weddington@atmel.com> - - * config/tc-avr.c (mcu_types): Add atmega32m1. - * doc/c-avr.texi: Likewise. - -2008-03-27 Ineiev <ineiev@yahoo.co.uk> - - * config/tc-arm.c (do_neon_cvt): Move variable declarations to - start of block. - (do_neon_ext): Fix sign of comparison. - -2008-03-26 Bernd Schmidt <bernd.schmidt@analog.com> - - From Jie Zhang <jie.zhang@analog.com> - * config/bfin-parse.y (asm_1): Check AREGS in comparison - instructions. And call yyerror when comparing PREG with - DREG. - (check_macfunc_option): New. - (check_macfuncs): Check option by calling check_macfunc_option. - Fix comparison always true warnings. Both scalar instructions - of vector instruction must share the same mode option. Only allow - option mode at the end of the second instruction of the vector. - (asm_1): Check option by calling check_macfunc_option. - - * config/bfin-parse.y (check_macfunc_option): Allow (IU) - option for multiply and multiply-accumulate to data register - instruction. - (check_macfuncs): Don't check if accumulator matches the data register - here. - (assign_macfunc): Check if accumulator matches the - data register in each rule that moves to the data - register. - - * config/tc-bfin.c (bfin_start_line_hook): Localize the labels - generated for LOOP_BEGIN and LOOP_END instructions. - (bfin_gen_loop): Likewise. - -2008-03-19 Andreas Krebbel <krebbel1@de.ibm.com> - - * config/tc-s390.c (md_parse_option): z10 option added. - -2008-03-17 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> - - * aclocal.m4: Regenerate. - * configure: Likewise. - * Makefile.in: Likewise. - * doc/Makefile.in: Likewise. - -2008-03-17 Adrian Bunk <bunk@stusta.de> - - PR 5946 - * config/tc-hppa.c (is_same_frag): Delete. - -2008-03-14 Sterling Augustine <sterling@tensilica.com> - - * config/tc-xtensa.h (xtensa_relax_statesE): Update comment for - RELAX_LOOP_END_ADD_NOP. - -2008-03-13 Evandro Menezes <evandro@yahoo.com> - - PR gas/5895 - * read.c (s_mexit): Warn if attempting to exit a macro when not - inside a macro definition. - -2008-03-13 Alan Modra <amodra@bigpond.net.au> - - * Makefile.am: Run "make dep-am". - * Makefile.in: Regenerate. - * configure: Regenerate. - -2008-03-09 Paul Brook <paul@codesourcery.com> - - * config/tc-arm.c (arm_cpu_option_table): Add cortex-a9. - * doc/c-arm.texi: Add cortex-a9. - -2008-03-09 Paul Brook <paul@codesourcery.com> - - * config/tc-arm.c (fpu_vfp_ext_d32): New vairable. - (parse_vfp_reg_list, encode_arm_vfp_reg): Use it. - (arm_option_cpu_value): Add vfpv3-d16, vfpv2 and vfpv3. - (aeabi_set_public_attributes): Handle Tag_VFP_arch=VFPV3-D16. - * doc/c-arm.texi: Document new ARM FPU variants. - -2008-03-07 Paul Brook <paul@codesourcery.com> - - * config/tc-arm.c (md_apply_fix): Use correct offset range. - -2008-03-07 Alan Modra <amodra@bigpond.net.au> - - * config/tc-ppc.c (ppc_setup_opcodes): Tidy. Add code to test - for strict ordering of powerpc_opcodes, but disable for now. - -2008-03-04 Paul Brook <paul@codesourcery.com> - - * config/tc-arm.c (arm_ext_barrier, arm_ext_msr): New. - (arm_ext_v7m): Rename... - (arm_ext_m): ... to this. Include v6-M. - (do_t_add_sub): Allow narrow low-reg non flag setting adds. - (do_t_mrs, do_t_msr, aeabi_set_public_attributes): Use arm_ext_m. - (md_assemble): Allow wide msr instructions. - (insns): Add classifications for v6-m instructions. - (arm_cpu_option_table): Add cortex-m1. - (arm_arch_option_table): Add armv6-m. - (cpu_arch): Add ARM_ARCH_V6M. Fix numbering of other v6 variants. - -2008-03-03 Sterling Augustine <sterling@tensilica.com> - Bob Wilson <bob.wilson@acm.org> - - * config/tc-xtensa.c (xtensa_num_pipe_stages): New. - (md_begin): Initialize it. - (resources_conflict): Use it. - -2008-03-03 Sterling Augustine <sterling@tensilica.com> - - * config/tc-xtensa.h (RELAX_XTENSA_NONE): New. - -2008-03-03 Denys Vlasenko <vda.linux@googlemail.com> - H.J. Lu <hongjiu.lu@intel.com> - - PR gas/5543 - * read.c (pseudo_set): Don't allow global register symbol. - - * symbols.c (S_SET_EXTERNAL): Don't allow register symbol - global. - -2008-03-03 H.J. Lu <hongjiu.lu@intel.com> - - PR gas/5543 - * write.c (write_object_file): Don't allow symbols which were - equated to register. Stop if there is an error. - -2008-03-01 Alan Modra <amodra@bigpond.net.au> - - * config/tc-ppc.h (struct _ppc_fix_extra): New. - (ppc_cpu): Declare. - (TC_FIX_TYPE, TC_INIT_FIX_DATA): Define. - * config/tc-ppc.c (ppu_cpu): Make global. - (ppc_insert_operand): Add ppu_cpu parameter. - (md_assemble): Adjust for above change. - (md_apply_fix): Pass tc_fix_data.ppc_cpu to ppc_insert_operand. - -2008-02-22 Nick Clifton <nickc@redhat.com> - - * config/tc-arm.c (do_bx): Only test EF_ARM_EABI_VERSION on ELF - targeted ARM ports, otherwise just skip generating the reloc. - -2008-02-18 H.J. Lu <hongjiu.lu@intel.com> - - * doc/c-i386.texi: Update -march= and .arch. - -2008-02-18 Nick Clifton <nickc@redhat.com> - - * config/tc-mn10300.c (has_known_symbol_location): New function. - Do not regard weak symbols as having a known location. - (md_estimate_size_before_relax): Use new function. - (md_pcrel_from): Do not compute a pcrel against a weak symbol. - -2008-02-18 Jan Beulich <jbeulich@novell.com> - - * config/tc-i386.c (match_template): Disallow 'l' suffix when - currently selected CPU has no 32-bit support. - (parse_real_register): Do not return registers not available on - currently selected CPU. - -2008-02-16 H.J. Lu <hongjiu.lu@intel.com> - - * config/tc-i386.c (process_immext): Fix format. - -2008-02-16 H.J. Lu <hongjiu.lu@intel.com> - - * config/tc-i386.c (inoutportreg): New. - (process_immext): New. - (md_assemble): Use it. - (update_imm): Use imm16 and imm32s. - (i386_att_operand): Use inoutportreg. - -2008-02-14 H.J. Lu <hongjiu.lu@intel.com> - - * config/tc-i386.c (operand_type_all_zero): New. - (operand_type_set): Likewise. - (operand_type_equal): Likewise. - (cpu_flags_all_zero): Likewise. - (cpu_flags_set): Likewise. - (cpu_flags_equal): Likewise. - (UINTS_ALL_ZERO): Removed. - (UINTS_SET): Likewise. - (UINTS_CLEAR): Likewise. - (UINTS_EQUAL): Likewise. - (cpu_flags_match): Updated. - (smallest_imm_type): Likewise. - (set_cpu_arch): Likewise. - (md_assemble): Likewise. - (optimize_imm): Likewise. - (match_template): Likewise. - (process_suffix): Likewise. - (update_imm): Likewise. - (process_drex): Likewise. - (process_operands): Likewise. - (build_modrm_byte): Likewise. - (i386_immediate): Likewise. - (i386_displacement): Likewise. - (i386_att_operand): Likewise. - (parse_real_register): Likewise. - (md_parse_option): Likewise. - (i386_target_format): Likewise. - -2008-02-14 Dimitry Andric <dimitry@andric.com> - - PR gas/5712 - * config/tc-arm.c (s_arm_unwind_save): Advance the input line - pointer past the comma after parsing a floating point register - name. - -2008-02-14 Hakan Ardo <hakan@debian.org> - - PR gas/2626 - * config/tc-avr.c (mcu_types): Change the ISA tyoe of the attiny26 - to AVR_ISA_2xxe. - (avr_operand): Disallow post-increment addressing in the lpm - instruction for the attiny26. - -2008-02-13 Jan Beulich <jbeulich@novell.com> - - * config/tc-i386.c (parse_real_register): Don't return 'FLAT' - if not in Intel mode. - (i386_intel_operand): Ignore segment overrides in immediate and - offset operands. - (intel_e11): Range-check i.mem_operands before use as array - index. Filter out FLAT for uses other than as segment override. - (intel_get_token): Remove broken promotion of "FLAT:" to mean - "offset FLAT:". - -2008-02-13 Jan Beulich <jbeulich@novell.com> - - * config/tc-i386.c (intel_e09): Also special-case 'bound'. - -2008-02-13 Jan Beulich <jbeulich@novell.com> - - * config/tc-i386.c (allow_pseudo_reg): New. - (parse_real_register): Check for NULL just once. Allow all - register table entries when allow_pseudo_reg is non-zero. - Don't allow any registers without type when allow_pseudo_reg - is zero. - (tc_x86_regname_to_dw2regnum): Replace with ... - (tc_x86_parse_to_dw2regnum): ... this. - (tc_x86_frame_initial_instructions): Adjust for above change. - * config/tc-i386.h (tc_regname_to_dw2regnum): Remove. - (tc_parse_to_dw2regnum): New. - (tc_x86_regname_to_dw2regnum): Replace with ... - (tc_x86_parse_to_dw2regnum): ... this. - * dw2gencfi.c (tc_parse_to_dw2regnum): New, broken out of ... - (cfi_parse_reg): ... this. Use tc_parse_to_dw2regnum. Adjust - error handling. - -2008-02-12 Nick Clifton <nickc@redhat.com> - - * config/tc-tic4x.c (tic4x_insn_insert): Add const qualifier to - argument. - (tic4x_insn_add): Likewise. - (md_begin): Drop cast that was discarding a const qualifier. - * config/tc-d30v.c (get_reloc): Add const qualifier to op - argument. - (build_insn): Drop cast that was discarding a const qualifier. - -2008-02-11 H.J. Lu <hongjiu.lu@intel.com> - - * config/tc-i386.c (cpu_arch): Add .xsave. - (md_show_usage): Add .xsave. - - * doc/c-i386.texi: Add xsave to -march=. - -2008-02-07 Alan Modra <amodra@bigpond.net.au> - - * read.c (s_weakref): Don't pass unadorned NULL to concat. - * config/tc-i386.c (set_cpu_arch, md_parse_option): Likewise. - -2008-02-05 Sterling Augustine <sterling@tensilica.com> - - * config/tc-xtensa.c (relax_frag_immed): Change internal consistency - checks into assertions. When relaxation produces an operation that - does not fit in the current FLIX instruction, make sure that the - operation is relaxed as needed to account for being placed following - the current instruction. - -2008-02-04 H.J. Lu <hongjiu.lu@intel.com> - - PR 5715 - * configure: Regenerated. - -2008-02-04 Adam Nemet <anemet@caviumnetworks.com> - - * config/tc-mips.c (mips_cpu_info_table): Add Octeon. - -2008-01-31 Marc Gauthier <marc@tensilica.com> - - * configure.tgt (xtensa*-*-*): Recognize processor variants. - -2008-01-25 Kai Tietz <kai.tietz@onevision.com> - - * read.c: (emit_expr): Correct for mingw use of printf size - specifier. - -2008-01-24 Bob Wilson <bob.wilson@acm.org> - - * doc/c-xtensa.texi (Xtensa Syntax): Clarify handling of opcodes that - can only be encoded in FLIX instructions but are not specified as such. - (Xtensa Automatic Alignment): Remove obsolete comment about debugging - labels. - -2008-01-24 H.J. Lu <hongjiu.lu@intel.com> - - * NEWS: Mention new command line options for x86 targets. - -2008-01-23 H.J. Lu <hongjiu.lu@intel.com> - - * config/tc-i386.c (md_show_usage): Replace tabs with spaces. - -2008-01-23 Eric B. Weddington <eric.weddington@atmel.com> - - * config/tc-avr.c (mcu_types): Change opcode set for at86rf401. - -2008-01-23 H.J. Lu <hongjiu.lu@intel.com> - - * config/tc-i386.c (md_show_usage): Show more processors for - -march=/-mtune=. - -2008-01-22 H.J. Lu <hongjiu.lu@intel.com> - - * config/tc-i386.c (i386_target_format): Remove cpummx2. - -2008-01-22 H.J. Lu <hongjiu.lu@intel.com> - - * config/tc-i386.c (XXX_PREFIX): Moved from tc-i386.h. - (XXX_MNEM_SUFFIX): Likewise. - (END_OF_INSN): Likewise. - (templates): Likewise. - (modrm_byte): Likewise. - (rex_byte): Likewise. - (DREX_XXX): Likewise. - (drex_byte): Likewise. - (sib_byte): Likewise. - (processor_type): Likewise. - (arch_entry): Likewise. - (cpu_sub_arch_name): Remove const. - (cpu_arch): Add .vmx and .smx. - (set_cpu_arch): Append cpu_sub_arch_name. - (md_parse_option): Support -march=CPU[,+EXTENSION...]. - (md_show_usage): Updated. - - * config/tc-i386.h (XXX_PREFIX): Moved to tc-i386.c. - (XXX_MNEM_SUFFIX): Likewise. - (END_OF_INSN): Likewise. - (templates): Likewise. - (modrm_byte): Likewise. - (rex_byte): Likewise. - (DREX_XXX): Likewise. - (drex_byte): Likewise. - (sib_byte): Likewise. - (processor_type): Likewise. - (arch_entry): Likewise. - - * doc/as.texinfo: Update i386 -march option. - - * doc/c-i386.texi: Update -march= for ISA. - -2008-01-18 Bob Wilson <bob.wilson@acm.org> - - * config/tc-xtensa.c (xtensa_leb128): New function. - (md_pseudo_table): Use it for sleb128 and uleb128. - (is_leb128_expr): New internal flag. - (xtensa_symbol_new_hook): Check new flag. - -2008-01-16 Eric B. Weddington <eric.weddington@atmel.com> - - * config/tc-avr.c (mcu_types): Change opcode set for avr3, - at90usb82, at90usb162. - * doc/c-avr.texi: Change architecture grouping for at90usb82, - at90usb162. - These changes support the new avr35 architecture group in gcc. - -2008-01-15 H.J. Lu <hongjiu.lu@intel.com> - - * config/tc-i386.c (md_assemble): Also zap movzx and movsx - suffix for AT&T syntax. - -2008-01-14 H.J. Lu <hongjiu.lu@intel.com> - - * config/tc-i386.c (match_reg_size): New. - (match_mem_size): Likewise. - (operand_size_match): Likewise. - (operand_type_match): Also clear all size fields. - (match_template): Skip Intel syntax when in AT&T syntax. - Call operand_size_match to check operand size. - (i386_att_operand): Set the mem field to 1 for memory - operand. - (i386_intel_operand): Likewise. - -2008-01-12 H.J. Lu <hongjiu.lu@intel.com> - - PR gas/5534 - * config/tc-i386.c (_i386_insn): Update comment. - (operand_type_match): Also clear unspecified. - (operand_type_register_match): Likewise. - (parse_operands): Initialize unspecified. - (i386_intel_operand): Likewise. - (match_template): Check memory and accumulator operand size. - (i386_att_operand): Clear unspecified on register operand. - (intel_e11): Likewise. - (intel_e09): Set operand size and clean unspecified for - "XXX PTR". - -2008-01-11 Andreas Schwab <schwab@suse.de> - - * read.c (s_space): Declare `repeat' as offsetT. - -2008-01-10 H.J. Lu <hongjiu.lu@intel.com> - - * config/tc-i386.c (match_template): Check processor support - first. - -2008-01-10 H.J. Lu <hongjiu.lu@intel.com> - - * config/tc-i386.c (match_template): Continue if processor - doesn't match. - -2008-01-09 Alexandre Oliva <aoliva@redhat.com> - - * config/tc-ia64.c (ia64_convert_frag): Zero-initialize room for - unwind personality function address. - -2008-01-09 Bob Wilson <bob.wilson@acm.org> - - * dwarf2dbg.c (out_sleb128): Delete. - (size_fixed_inc_line_addr, emit_fixed_inc_line_addr): New. - (out_fixed_inc_line_addr): Delete. - (relax_inc_line_addr, dwarf2dbg_estimate_size_before_relax): Call new - size_fixed_inc_line_addr if DWARF2_USE_FIXED_ADVANCE_PC is set. - (dwarf2dbg_convert_frag): Likewise for emit_fixed_inc_line_addr. - (process_entries): Remove calls to out_fixed_inc_line_addr. When - DWARF2_USE_FIXED_ADVANCE_PC is set, call relax_inc_line_addr. - * read.h (emit_expr_fix): New prototype. - * read.c (emit_expr): Move code to emit_expr_fix and use it here. - (emit_expr_fix): New. - -2008-01-09 H.J. Lu <hongjiu.lu@intel.com> - - * config/tc-i386.c (match_template): Check register size - only when size of operands can be encoded the canonical way. - -2008-01-08 H.J. Lu <hongjiu.lu@intel.com> - - * config/tc-i386.c (i386_operand): Renamed to ... - (i386_att_operand): This. - (parse_operands): Updated. - -2008-01-05 H.J. Lu <hongjiu.lu@intel.com> - - * doc/c-i386.texi: Update .att_mnemonic and .intel_mnemonic. - - * config/tc-i386.c (set_intel_mnemonic): Set intel_mnemonic - only. - (md_assemble): Remove Intel mode workaround. - (match_template): Check support for old gcc, AT&T mnemonic - and Intel Syntax. - (md_parse_option): Don't set intel_mnemonic to 0 for - OPTION_MOLD_GCC. - -2008-01-04 H.J. Lu <hongjiu.lu@intel.com> - - * config/tc-i386.h: Update copyright to 2008. - -2008-01-04 Nick Clifton <nickc@redhat.com> - - * config/tc-ppc.c (parse_cpu): Preserve the settings of the - PPC_OPCODE_ALTIVEC and PPC_OPCODE_SPE flags. - -2008-01-03 H.J. Lu <hongjiu.lu@intel.com> - - * config/tc-i386.c (md_assemble): Use !intel_mnemonic instead - of SYSV386_COMPAT. - -2008-01-03 H.J. Lu <hongjiu.lu@intel.com> - - * gas/config/tc-i386.c (cpu_arch_flags_not): Removed. - (cpu_flags_not): Likewise. - (cpu_flags_match): Updated to check 64bit and arch. - (set_code_flag): Remove cpu_arch_flags_not. - (set_16bit_gcc_code_flag): Likewise. - (set_cpu_arch): Likewise. - (md_begin): Likewise. - (parse_insn): Call cpu_flags_match to check 64bit and arch. - (match_template): Likewise. - -2008-01-03 Jakub Jelinek <jakub@redhat.com> - - * config/tc-i386.c (process_drex): Initialize modrm_reg and - modrm_regmem to 0 instead of None. - -2008-01-03 H.J. Lu <hongjiu.lu@intel.com> - - * config/tc-i386.c (match_template): Use the xmmword field - instead of no_xsuf. - -2008-01-02 H.J. Lu <hongjiu.lu@intel.com> - - * config/tc-i386.c (process_suffix): Fix a typo. - -2008-01-02 H.J. Lu <hongjiu.lu@intel.com> - - PR gas/5534 - * config/tc-i386.c (match_template): Handle XMMWORD_MNEM_SUFFIX. - Check memory size in Intel mode. - (process_suffix): Handle XMMWORD_MNEM_SUFFIX. - (intel_e09): Likewise. - - * config/tc-i386.h (XMMWORD_MNEM_SUFFIX): New. - -2008-01-02 Catherine Moore <clm@codesourcery.com> - - * config/tc-mips.c (mips_ip): Check operands on jalr instruction. - -For older changes see ChangeLog-2007 - -Copyright (C) 2008 Free Software Foundation, Inc. - -Copying and distribution of this file, with or without modification, -are permitted in any medium without royalty provided the copyright -notice and this notice are preserved. - -Local Variables: -mode: change-log -left-margin: 8 -fill-column: 74 -version-control: never -End: |