diff options
Diffstat (limited to 'binutils-2.24/config/acx.m4')
-rw-r--r-- | binutils-2.24/config/acx.m4 | 621 |
1 files changed, 0 insertions, 621 deletions
diff --git a/binutils-2.24/config/acx.m4 b/binutils-2.24/config/acx.m4 deleted file mode 100644 index 9ff31eb8..00000000 --- a/binutils-2.24/config/acx.m4 +++ /dev/null @@ -1,621 +0,0 @@ -# Autoconf M4 include file defining utility macros for complex Canadian -# cross builds. - -dnl #### -dnl # _GCC_TOPLEV_NONCANONICAL_BUILD -dnl # $build_alias or canonical $build if blank. -dnl # Used when we would use $build_alias, but empty is not OK. -AC_DEFUN([_GCC_TOPLEV_NONCANONICAL_BUILD], -[AC_REQUIRE([AC_CANONICAL_BUILD]) []dnl -case ${build_alias} in - "") build_noncanonical=${build} ;; - *) build_noncanonical=${build_alias} ;; -esac -]) []dnl # _GCC_TOPLEV_NONCANONICAL_BUILD - -dnl #### -dnl # _GCC_TOPLEV_NONCANONICAL_HOST -dnl # $host_alias, or $build_noncanonical if blank. -dnl # Used when we would use $host_alias, but empty is not OK. -AC_DEFUN([_GCC_TOPLEV_NONCANONICAL_HOST], -[AC_REQUIRE([_GCC_TOPLEV_NONCANONICAL_BUILD]) []dnl -case ${host_alias} in - "") host_noncanonical=${build_noncanonical} ;; - *) host_noncanonical=${host_alias} ;; -esac -]) []dnl # _GCC_TOPLEV_NONCANONICAL_HOST - -dnl #### -dnl # _GCC_TOPLEV_NONCANONICAL_TARGET -dnl # $target_alias or $host_noncanonical if blank. -dnl # Used when we would use $target_alias, but empty is not OK. -AC_DEFUN([_GCC_TOPLEV_NONCANONICAL_TARGET], -[AC_REQUIRE([_GCC_TOPLEV_NONCANONICAL_HOST]) []dnl -case ${target_alias} in - "") target_noncanonical=${host_noncanonical} ;; - *) target_noncanonical=${target_alias} ;; -esac -]) []dnl # _GCC_TOPLEV_NONCANONICAL_TARGET - -dnl #### -dnl # ACX_NONCANONICAL_BUILD -dnl # Like underscored version, but AC_SUBST's. -AC_DEFUN([ACX_NONCANONICAL_BUILD], -[AC_REQUIRE([_GCC_TOPLEV_NONCANONICAL_BUILD]) []dnl -AC_SUBST(build_noncanonical) -]) []dnl # ACX_NONCANONICAL_BUILD - -dnl #### -dnl # ACX_NONCANONICAL_HOST -dnl # Like underscored version, but AC_SUBST's. -AC_DEFUN([ACX_NONCANONICAL_HOST], -[AC_REQUIRE([_GCC_TOPLEV_NONCANONICAL_HOST]) []dnl -AC_SUBST(host_noncanonical) -]) []dnl # ACX_NONCANONICAL_HOST - -dnl #### -dnl # ACX_NONCANONICAL_TARGET -dnl # Like underscored version, but AC_SUBST's. -AC_DEFUN([ACX_NONCANONICAL_TARGET], -[AC_REQUIRE([_GCC_TOPLEV_NONCANONICAL_TARGET]) []dnl -AC_SUBST(target_noncanonical) -]) []dnl # ACX_NONCANONICAL_TARGET - -dnl #### -dnl # GCC_TOPLEV_SUBDIRS -dnl # GCC & friends build 'build', 'host', and 'target' tools. These must -dnl # be separated into three well-known subdirectories of the build directory: -dnl # build_subdir, host_subdir, and target_subdir. The values are determined -dnl # here so that they can (theoretically) be changed in the future. They -dnl # were previously reproduced across many different files. -dnl # -dnl # This logic really amounts to very little with autoconf 2.13; it will -dnl # amount to a lot more with autoconf 2.5x. -AC_DEFUN([GCC_TOPLEV_SUBDIRS], -[AC_REQUIRE([_GCC_TOPLEV_NONCANONICAL_TARGET]) []dnl -AC_REQUIRE([_GCC_TOPLEV_NONCANONICAL_BUILD]) []dnl - -# post-stage1 host modules use a different CC_FOR_BUILD so, in order to -# have matching libraries, they should use host libraries: Makefile.tpl -# arranges to pass --with-build-libsubdir=$(HOST_SUBDIR). -# However, they still use the build modules, because the corresponding -# host modules (e.g. bison) are only built for the host when bootstrap -# finishes. So: -# - build_subdir is where we find build modules, and never changes. -# - build_libsubdir is where we find build libraries, and can be overridden. - -# Prefix 'build-' so this never conflicts with target_subdir. -build_subdir="build-${build_noncanonical}" -AC_ARG_WITH(build-libsubdir, -[ --with-build-libsubdir=[DIR] Directory where to find libraries for build system], -build_libsubdir="$withval", -build_libsubdir="$build_subdir") -# --srcdir=. covers the toplevel, while "test -d" covers the subdirectories -if ( test $srcdir = . && test -d gcc ) \ - || test -d $srcdir/../host-${host_noncanonical}; then - host_subdir="host-${host_noncanonical}" -else - host_subdir=. -fi -# No prefix. -target_subdir=${target_noncanonical} -AC_SUBST([build_libsubdir]) []dnl -AC_SUBST([build_subdir]) []dnl -AC_SUBST([host_subdir]) []dnl -AC_SUBST([target_subdir]) []dnl -]) []dnl # GCC_TOPLEV_SUBDIRS - - -#### -# _NCN_TOOL_PREFIXES: Some stuff that oughtta be done in AC_CANONICAL_SYSTEM -# or AC_INIT. -# These demand that AC_CANONICAL_SYSTEM be called beforehand. -AC_DEFUN([_NCN_TOOL_PREFIXES], -[ncn_tool_prefix= -test -n "$host_alias" && ncn_tool_prefix=$host_alias- -ncn_target_tool_prefix= -test -n "$target_alias" && ncn_target_tool_prefix=$target_alias- -]) []dnl # _NCN_TOOL_PREFIXES - -#### -# NCN_STRICT_CHECK_TOOLS(variable, progs-to-check-for,[value-if-not-found],[path]) -# Like plain AC_CHECK_TOOLS, but require prefix if build!=host. - -AC_DEFUN([NCN_STRICT_CHECK_TOOLS], -[AC_REQUIRE([_NCN_TOOL_PREFIXES]) []dnl -AC_ARG_VAR([$1], [$1 for the host]) - -if test -n "[$]$1"; then - ac_cv_prog_$1=[$]$1 -elif test -n "$ac_cv_prog_$1"; then - $1=$ac_cv_prog_$1 -fi - -if test -n "$ac_cv_prog_$1"; then - for ncn_progname in $2; do - AC_CHECK_PROG([$1], [${ncn_progname}], [${ncn_progname}], , [$4]) - done -fi - -for ncn_progname in $2; do - if test -n "$ncn_tool_prefix"; then - AC_CHECK_PROG([$1], [${ncn_tool_prefix}${ncn_progname}], - [${ncn_tool_prefix}${ncn_progname}], , [$4]) - fi - if test -z "$ac_cv_prog_$1" && test $build = $host ; then - AC_CHECK_PROG([$1], [${ncn_progname}], [${ncn_progname}], , [$4]) - fi - test -n "$ac_cv_prog_$1" && break -done - -if test -z "$ac_cv_prog_$1" ; then - ifelse([$3],[], [set dummy $2 - if test $build = $host ; then - $1="[$]2" - else - $1="${ncn_tool_prefix}[$]2" - fi], [$1="$3"]) -fi -]) []dnl # NCN_STRICT_CHECK_TOOLS - -#### -# NCN_STRICT_CHECK_TARGET_TOOLS(variable, progs-to-check-for,[value-if-not-found],[path]) -# Like CVS Autoconf AC_CHECK_TARGET_TOOLS, but require prefix if build!=target. - -AC_DEFUN([NCN_STRICT_CHECK_TARGET_TOOLS], -[AC_REQUIRE([_NCN_TOOL_PREFIXES]) []dnl -AC_ARG_VAR([$1], patsubst([$1], [_FOR_TARGET$], [])[ for the target]) - -if test -n "[$]$1"; then - ac_cv_prog_$1=[$]$1 -elif test -n "$ac_cv_prog_$1"; then - $1=$ac_cv_prog_$1 -fi - -if test -n "$ac_cv_prog_$1"; then - for ncn_progname in $2; do - AC_CHECK_PROG([$1], [${ncn_progname}], [${ncn_progname}], , [$4]) - done -fi - -if test -z "$ac_cv_prog_$1" && test -n "$with_build_time_tools"; then - for ncn_progname in $2; do - AC_MSG_CHECKING([for ${ncn_progname} in $with_build_time_tools]) - if test -x $with_build_time_tools/${ncn_progname}; then - ac_cv_prog_$1=$with_build_time_tools/${ncn_progname} - AC_MSG_RESULT(yes) - break - else - AC_MSG_RESULT(no) - fi - done -fi - -if test -z "$ac_cv_prog_$1"; then - for ncn_progname in $2; do - if test -n "$ncn_target_tool_prefix"; then - AC_CHECK_PROG([$1], [${ncn_target_tool_prefix}${ncn_progname}], - [${ncn_target_tool_prefix}${ncn_progname}], , [$4]) - fi - if test -z "$ac_cv_prog_$1" && test $build = $target ; then - AC_CHECK_PROG([$1], [${ncn_progname}], [${ncn_progname}], , [$4]) - fi - test -n "$ac_cv_prog_$1" && break - done -fi - -if test -z "$ac_cv_prog_$1" ; then - ifelse([$3],[], [set dummy $2 - if test $build = $target ; then - $1="[$]2" - else - $1="${ncn_target_tool_prefix}[$]2" - fi], [$1="$3"]) -else - $1="$ac_cv_prog_$1" -fi -]) []dnl # NCN_STRICT_CHECK_TARGET_TOOLS - - -# Backported from Autoconf 2.5x; can go away when and if -# we switch. Put the OS path separator in $PATH_SEPARATOR. -AC_DEFUN([ACX_PATH_SEP], [ -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - echo "#! /bin/sh" >conf$$.sh - echo "exit 0" >>conf$$.sh - chmod +x conf$$.sh - if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then - PATH_SEPARATOR=';' - else - PATH_SEPARATOR=: - fi - rm -f conf$$.sh -fi -]) - - -AC_DEFUN([ACX_TOOL_DIRS], [ -AC_REQUIRE([ACX_PATH_SEP]) -if test "x$exec_prefix" = xNONE; then - if test "x$prefix" = xNONE; then - gcc_cv_tool_prefix=$ac_default_prefix - else - gcc_cv_tool_prefix=$prefix - fi -else - gcc_cv_tool_prefix=$exec_prefix -fi - -# If there is no compiler in the tree, use the PATH only. In any -# case, if there is no compiler in the tree nobody should use -# AS_FOR_TARGET and LD_FOR_TARGET. -if test x$host = x$build && test -f $srcdir/gcc/BASE-VER; then - gcc_version=`cat $srcdir/gcc/BASE-VER` - gcc_cv_tool_dirs="$gcc_cv_tool_prefix/libexec/gcc/$target_noncanonical/$gcc_version$PATH_SEPARATOR" - gcc_cv_tool_dirs="$gcc_cv_tool_dirs$gcc_cv_tool_prefix/libexec/gcc/$target_noncanonical$PATH_SEPARATOR" - gcc_cv_tool_dirs="$gcc_cv_tool_dirs/usr/lib/gcc/$target_noncanonical/$gcc_version$PATH_SEPARATOR" - gcc_cv_tool_dirs="$gcc_cv_tool_dirs/usr/lib/gcc/$target_noncanonical$PATH_SEPARATOR" - gcc_cv_tool_dirs="$gcc_cv_tool_dirs$gcc_cv_tool_prefix/$target_noncanonical/bin/$target_noncanonical/$gcc_version$PATH_SEPARATOR" - gcc_cv_tool_dirs="$gcc_cv_tool_dirs$gcc_cv_tool_prefix/$target_noncanonical/bin$PATH_SEPARATOR" -else - gcc_cv_tool_dirs= -fi - -if test x$build = x$target && test -n "$md_exec_prefix"; then - gcc_cv_tool_dirs="$gcc_cv_tool_dirs$md_exec_prefix$PATH_SEPARATOR" -fi - -]) []dnl # ACX_TOOL_DIRS - -# ACX_HAVE_GCC_FOR_TARGET -# Check if the variable GCC_FOR_TARGET really points to a GCC binary. -AC_DEFUN([ACX_HAVE_GCC_FOR_TARGET], [ -cat > conftest.c << \EOF -#ifdef __GNUC__ - gcc_yay; -#endif -EOF -if ($GCC_FOR_TARGET -E conftest.c | grep gcc_yay) > /dev/null 2>&1; then - have_gcc_for_target=yes -else - GCC_FOR_TARGET=${ncn_target_tool_prefix}gcc - have_gcc_for_target=no -fi -rm conftest.c -]) - -# ACX_CHECK_INSTALLED_TARGET_TOOL(VAR, PROG) -# Searching for installed target binutils. We need to take extra care, -# else we may find the wrong assembler, linker, etc., and lose. -# -# First try --with-build-time-tools, if specified. -# -# For build != host, we ask the installed GCC for the name of the tool it -# uses, and accept it if it is an absolute path. This is because the -# only good choice for a compiler is the same GCC version that is being -# installed (or we couldn't make target libraries), and we assume that -# on the host system we'll have not only the same GCC version, but also -# the same binutils version. -# -# For build == host, search the same directories that the installed -# compiler will search. We used to do this for the assembler, linker, -# and nm only; for simplicity of configuration, however, we extend this -# criterion to tools (such as ar and ranlib) that are never invoked by -# the compiler, to avoid mismatches. -# -# Also note we have to check MD_EXEC_PREFIX before checking the user's path -# if build == target. This makes the most sense only when bootstrapping, -# but we also do so when build != host. In this case, we hope that the -# build and host systems will have similar contents of MD_EXEC_PREFIX. -# -# If we do not find a suitable binary, then try the user's path. - -AC_DEFUN([ACX_CHECK_INSTALLED_TARGET_TOOL], [ -AC_REQUIRE([ACX_TOOL_DIRS]) -AC_REQUIRE([ACX_HAVE_GCC_FOR_TARGET]) -if test -z "$ac_cv_path_$1" ; then - if test -n "$with_build_time_tools"; then - AC_MSG_CHECKING([for $2 in $with_build_time_tools]) - if test -x $with_build_time_tools/$2; then - $1=`cd $with_build_time_tools && pwd`/$2 - ac_cv_path_$1=[$]$1 - AC_MSG_RESULT([$ac_cv_path_$1]) - else - AC_MSG_RESULT(no) - fi - elif test $build != $host && test $have_gcc_for_target = yes; then - $1=`$GCC_FOR_TARGET --print-prog-name=$2` - test [$]$1 = $2 && $1= - test -n "[$]$1" && ac_cv_path_$1=[$]$1 - fi -fi -if test -z "$ac_cv_path_$1" && test -n "$gcc_cv_tool_dirs"; then - AC_PATH_PROG([$1], [$2], [], [$gcc_cv_tool_dirs]) -fi -if test -z "$ac_cv_path_$1" ; then - NCN_STRICT_CHECK_TARGET_TOOLS([$1], [$2]) -else - $1=$ac_cv_path_$1 -fi -]) []dnl # ACX_CHECK_INSTALLED_TARGET_TOOL - -### -# AC_PROG_CPP_WERROR -# Used for autoconf 2.5x to force AC_PREPROC_IFELSE to reject code which -# triggers warnings from the preprocessor. Will be in autoconf 2.58. -# For now, using this also overrides header checks to use only the -# preprocessor (matches 2.13 behavior; matching 2.58's behavior is a -# bit harder from here). -# Eventually autoconf will default to checking headers with the compiler -# instead, and we'll have to do this differently. - -AC_DEFUN([AC_PROG_CPP_WERROR], -[AC_REQUIRE([AC_PROG_CPP])dnl -m4_define([AC_CHECK_HEADER],m4_defn([_AC_CHECK_HEADER_OLD])) -ac_c_preproc_warn_flag=yes])# AC_PROG_CPP_WERROR - -# Test for GNAT. -# We require the gnatbind & gnatmake programs, as well as a compiler driver -# that understands Ada. We use the user's CC setting, already found, and -# possibly add $1 to the command-line parameters. -# -# Sets the shell variable have_gnat to yes or no as appropriate, and -# substitutes GNATBIND and GNATMAKE. -AC_DEFUN([ACX_PROG_GNAT], -[AC_REQUIRE([AC_CHECK_TOOL_PREFIX]) -AC_REQUIRE([AC_PROG_CC]) -AC_CHECK_TOOL(GNATBIND, gnatbind, no) -AC_CHECK_TOOL(GNATMAKE, gnatmake, no) -AC_CACHE_CHECK([whether compiler driver understands Ada], - acx_cv_cc_gcc_supports_ada, -[cat >conftest.adb <<EOF -procedure conftest is begin null; end conftest; -EOF -acx_cv_cc_gcc_supports_ada=no -# There is a bug in old released versions of GCC which causes the -# driver to exit successfully when the appropriate language module -# has not been installed. This is fixed in 2.95.4, 3.0.2, and 3.1. -# Therefore we must check for the error message as well as an -# unsuccessful exit. -# Other compilers, like HP Tru64 UNIX cc, exit successfully when -# given a .adb file, but produce no object file. So we must check -# if an object file was really produced to guard against this. -errors=`(${CC} $1[]m4_ifval([$1], [ ])-c conftest.adb) 2>&1 || echo failure` -if test x"$errors" = x && test -f conftest.$ac_objext; then - acx_cv_cc_gcc_supports_ada=yes -fi -rm -f conftest.*]) - -if test "x$GNATBIND" != xno && test "x$GNATMAKE" != xno && test x$acx_cv_cc_gcc_supports_ada != xno; then - have_gnat=yes -else - have_gnat=no -fi -]) - -dnl 'make compare' can be significantly faster, if cmp itself can -dnl skip bytes instead of using tail. The test being performed is -dnl "if cmp --ignore-initial=2 t1 t2 && ! cmp --ignore-initial=1 t1 t2" -dnl but we need to sink errors and handle broken shells. We also test -dnl for the parameter format "cmp file1 file2 skip1 skip2" which is -dnl accepted by cmp on some systems. -AC_DEFUN([ACX_PROG_CMP_IGNORE_INITIAL], -[AC_CACHE_CHECK([how to compare bootstrapped objects], gcc_cv_prog_cmp_skip, -[ echo abfoo >t1 - echo cdfoo >t2 - gcc_cv_prog_cmp_skip='tail +16c $$f1 > tmp-foo1; tail +16c $$f2 > tmp-foo2; cmp tmp-foo1 tmp-foo2' - if cmp t1 t2 2 2 > /dev/null 2>&1; then - if cmp t1 t2 1 1 > /dev/null 2>&1; then - : - else - gcc_cv_prog_cmp_skip='cmp $$f1 $$f2 16 16' - fi - fi - if cmp --ignore-initial=2 t1 t2 > /dev/null 2>&1; then - if cmp --ignore-initial=1 t1 t2 > /dev/null 2>&1; then - : - else - gcc_cv_prog_cmp_skip='cmp --ignore-initial=16 $$f1 $$f2' - fi - fi - rm t1 t2 -]) -do_compare="$gcc_cv_prog_cmp_skip" -AC_SUBST(do_compare) -]) - -dnl See whether we can include both string.h and strings.h. -AC_DEFUN([ACX_HEADER_STRING], -[AC_CACHE_CHECK([whether string.h and strings.h may both be included], - gcc_cv_header_string, -[AC_TRY_COMPILE([#include <string.h> -#include <strings.h>], , gcc_cv_header_string=yes, gcc_cv_header_string=no)]) -if test $gcc_cv_header_string = yes; then - AC_DEFINE(STRING_WITH_STRINGS, 1, [Define if you can safely include both <string.h> and <strings.h>.]) -fi -]) - -dnl See if stdbool.h properly defines bool and true/false. -dnl Check whether _Bool is built-in. -AC_DEFUN([ACX_HEADER_STDBOOL], -[AC_CACHE_CHECK([for working stdbool.h], - ac_cv_header_stdbool_h, -[AC_TRY_COMPILE([#include <stdbool.h>], -[bool foo = false;], -ac_cv_header_stdbool_h=yes, ac_cv_header_stdbool_h=no)]) -if test $ac_cv_header_stdbool_h = yes; then - AC_DEFINE(HAVE_STDBOOL_H, 1, - [Define if you have a working <stdbool.h> header file.]) -fi -AC_CACHE_CHECK(for built-in _Bool, gcc_cv_c__bool, -[AC_TRY_COMPILE(, -[_Bool foo;], -gcc_cv_c__bool=yes, gcc_cv_c__bool=no) -]) -if test $gcc_cv_c__bool = yes; then - AC_DEFINE(HAVE__BOOL, 1, [Define if the \`_Bool' type is built-in.]) -fi -]) - -dnl See if hard links work and if not, try to substitute $1 or simple copy. -AC_DEFUN([ACX_PROG_LN], -[AC_MSG_CHECKING(whether ln works) -AC_CACHE_VAL(acx_cv_prog_LN, -[rm -f conftestdata_t -echo >conftestdata_f -if ln conftestdata_f conftestdata_t 2>/dev/null -then - acx_cv_prog_LN=ln -else - acx_cv_prog_LN=no -fi -rm -f conftestdata_f conftestdata_t -])dnl -if test $acx_cv_prog_LN = no; then - LN="ifelse([$1],,cp,[$1])" - AC_MSG_RESULT([no, using $LN]) -else - LN="$acx_cv_prog_LN" - AC_MSG_RESULT(yes) -fi -AC_SUBST(LN)dnl -]) - -dnl GCC_TARGET_TOOL(PROGRAM, TARGET-VAR, HOST-VAR, IN-TREE-TOOL, LANGUAGE) -AC_DEFUN([GCC_TARGET_TOOL], -[AC_MSG_CHECKING(where to find the target $1) -if test "x${build}" != "x${host}" ; then - if expr "x[$]$2" : "x/" > /dev/null; then - # We already found the complete path - ac_dir=`dirname [$]$2` - AC_MSG_RESULT(pre-installed in $ac_dir) - else - # Canadian cross, just use what we found - AC_MSG_RESULT(pre-installed) - fi -else - ifelse([$4],,, - [ok=yes - case " ${configdirs} " in - *" patsubst([$4], [/.*], []) "*) ;; - *) ok=no ;; - esac - ifelse([$5],,, - [case ,${enable_languages}, in - *,$5,*) ;; - *) ok=no ;; - esac]) - if test $ok = yes; then - # An in-tree tool is available and we can use it - $2='$$r/$(HOST_SUBDIR)/$4' - AC_MSG_RESULT(just compiled) - el])if expr "x[$]$2" : "x/" > /dev/null; then - # We already found the complete path - ac_dir=`dirname [$]$2` - AC_MSG_RESULT(pre-installed in $ac_dir) - elif test "x$target" = "x$host"; then - # We can use an host tool - $2='$($3)' - AC_MSG_RESULT(host tool) - else - # We need a cross tool - AC_MSG_RESULT(pre-installed) - fi -fi -AC_SUBST($2)]) - - -dnl Locate a program and check that its version is acceptable. -dnl ACX_PROG_CHECK_VER(var, name, version-switch, -dnl version-extract-regexp, version-glob) -AC_DEFUN([ACX_CHECK_PROG_VER],[ - AC_CHECK_PROG([$1], [$2], [$2]) - if test -n "[$]$1"; then - # Found it, now check the version. - AC_CACHE_CHECK([for modern $2], - [gcc_cv_prog_$2_modern], - [ac_prog_version=`eval [$]$1 $3 2>&1 | - sed -n 's/^.*patsubst([[$4]],/,\/).*$/\1/p'` - - [case $ac_prog_version in - '') gcc_cv_prog_$2_modern=no;; - $5) gcc_cv_prog_$2_modern=yes;; - *) gcc_cv_prog_$2_modern=no;; - esac] - ]) - else - gcc_cv_prog_$2_modern=no - fi - if test $gcc_cv_prog_$2_modern = no; then - $1="${CONFIG_SHELL-/bin/sh} $ac_aux_dir/missing $2" - fi -]) - -dnl Support the --with-pkgversion configure option. -dnl ACX_PKGVERSION(default-pkgversion) -AC_DEFUN([ACX_PKGVERSION],[ - AC_ARG_WITH(pkgversion, - AS_HELP_STRING([--with-pkgversion=PKG], - [Use PKG in the version string in place of "$1"]), - [case "$withval" in - yes) AC_MSG_ERROR([package version not specified]) ;; - no) PKGVERSION= ;; - *) PKGVERSION="($withval) " ;; - esac], - PKGVERSION="($1) " - ) - AC_SUBST(PKGVERSION) -]) - -dnl Support the --with-bugurl configure option. -dnl ACX_BUGURL(default-bugurl) -AC_DEFUN([ACX_BUGURL],[ - AC_ARG_WITH(bugurl, - AS_HELP_STRING([--with-bugurl=URL], - [Direct users to URL to report a bug]), - [case "$withval" in - yes) AC_MSG_ERROR([bug URL not specified]) ;; - no) BUGURL= - ;; - *) BUGURL="$withval" - ;; - esac], - BUGURL="$1" - ) - case ${BUGURL} in - "") - REPORT_BUGS_TO= - REPORT_BUGS_TEXI= - ;; - *) - REPORT_BUGS_TO="<$BUGURL>" - REPORT_BUGS_TEXI=@uref{`echo "$BUGURL" | sed 's/@/@@/g'`} - ;; - esac; - AC_SUBST(REPORT_BUGS_TO) - AC_SUBST(REPORT_BUGS_TEXI) -]) - -dnl #### -dnl # ACX_CHECK_CYGWIN_CAT_WORKS -dnl # On Cygwin hosts, check that the cat command ignores -dnl # carriage returns as otherwise builds will not work. -dnl # See binutils PR 4334 for more details. -AC_DEFUN([ACX_CHECK_CYGWIN_CAT_WORKS],[ -AC_MSG_CHECKING([to see if cat works as expected]) -echo a >cygwin-cat-check -if test `cat cygwin-cat-check` = a ; then - rm cygwin-cat-check - AC_MSG_RESULT(yes) -else - rm cygwin-cat-check - AC_MSG_RESULT(no) - AC_MSG_ERROR([The cat command does not ignore carriage return characters. - Please either mount the build directory in binary mode or run the following - commands before running any configure script: -set -o igncr -export SHELLOPTS - ]) -fi -]) |