summaryrefslogtreecommitdiffstats
path: root/binutils-2.17/gas/configure.in
diff options
context:
space:
mode:
Diffstat (limited to 'binutils-2.17/gas/configure.in')
-rw-r--r--binutils-2.17/gas/configure.in702
1 files changed, 0 insertions, 702 deletions
diff --git a/binutils-2.17/gas/configure.in b/binutils-2.17/gas/configure.in
deleted file mode 100644
index fe69a51c..00000000
--- a/binutils-2.17/gas/configure.in
+++ /dev/null
@@ -1,702 +0,0 @@
-dnl Process this file with autoconf to produce a configure script.
-dnl
-dnl And be careful when changing it! If you must add tests with square
-dnl brackets, be sure changequote invocations surround it.
-dnl
-dnl
-dnl v2.5 needed for --bindir et al
-AC_PREREQ(2.57)
-AC_INIT(as.h)
-
-dnl Autoconf 2.57 will find the aux dir without this. However, unless
-dnl we specify this explicitly, automake-1.7 will assume that ylwrap is in
-dnl gas/ instead of gas/../.
-AC_CONFIG_AUX_DIR(..)
-AC_CANONICAL_SYSTEM
-AC_ISC_POSIX
-
-changequote(,)dnl
-BFD_VERSION=`sed -n -e 's/^.._INIT_AUTOMAKE.*,[ ]*\([^ ]*\)[ ]*).*/\1/p' < ${srcdir}/../bfd/configure.in`
-changequote([,])dnl
-AM_INIT_AUTOMAKE(gas, ${BFD_VERSION})
-
-AM_PROG_LIBTOOL
-
-AC_ARG_ENABLE(targets,
-[ --enable-targets alternative target configurations besides the primary],
-[case "${enableval}" in
- yes | "") AC_ERROR(enable-targets option must specify target names or 'all')
- ;;
- no) enable_targets= ;;
- *) enable_targets=$enableval ;;
-esac])dnl
-AC_ARG_ENABLE(commonbfdlib,
-[ --enable-commonbfdlib build shared BFD/opcodes/libiberty library],
-[case "${enableval}" in
- yes) commonbfdlib=true ;;
- no) commonbfdlib=false ;;
- *) AC_MSG_ERROR([bad value ${enableval} for BFD commonbfdlib option]) ;;
-esac])dnl
-
-using_cgen=no
-
-AM_BINUTILS_WARNINGS
-
-# Generate a header file
-AM_CONFIG_HEADER(config.h:config.in)
-
-# If we are on a DOS filesystem, we must use gdb.ini rather than
-# .gdbinit.
-case "${host}" in
- *-*-msdos* | *-*-go32* | *-*-mingw32* | *-*-windows*)
- GDBINIT="gdb.ini"
- AC_CONFIG_FILES(gdb.ini:gdbinit.in)
- ;;
- *)
- GDBINIT=".gdbinit"
- AC_CONFIG_FILES(.gdbinit:gdbinit.in)
- ;;
-esac
-AC_SUBST(GDBINIT)
-
-#We need this for the host. BOUT header is in host order.
-AC_C_BIGENDIAN
-
-te_file=generic
-
-# Makefile target for installing gas in $(tooldir)/bin.
-install_tooldir=install-exec-tooldir
-
-canon_targets=""
-all_targets=no
-if test -n "$enable_targets" ; then
- for t in `echo $enable_targets | sed 's/,/ /g'`; do
- if test $t = "all"; then
- all_targets=yes
- continue
- fi
- result=`$ac_config_sub $t 2>/dev/null`
- if test -n "$result" ; then
- canon_targets="$canon_targets $result"
-# else
-# # Permit "all", etc. We don't support it yet though.
-# canon_targets="$canon_targets $t"
- fi
- done
- GAS_UNIQ(canon_targets)
-fi
-
-emulations=""
-
-for this_target in $target $canon_targets ; do
-
- targ=${this_target}
- . ${srcdir}/configure.tgt
-
- case ${target_cpu} in
- crisv32)
- AC_DEFINE_UNQUOTED(DEFAULT_CRIS_ARCH, $arch,
- [Default CRIS architecture.])
- ;;
- esac
-
- if test ${this_target} = $target ; then
- target_cpu_type=${cpu_type}
- elif test ${target_cpu_type} != ${cpu_type} ; then
- continue
- fi
-
- generic_target=${cpu_type}-${target_vendor}-${target_os}
- case ${generic_target} in
- i386-*-sco3.2v5*)
- if test ${this_target} = $target; then
- AC_DEFINE(SCO_ELF, 1, [Define if defaulting to ELF on SCO 5.])
- fi
- ;;
-
- i386-*-msdosdjgpp* \
- | i386-*-go32* \
- | i386-go32-rtems*)
- AC_DEFINE(STRICTCOFF, 1, [Using strict COFF?])
- ;;
-
- i860-*-*)
- AC_MSG_WARN(GAS support for ${generic_target} is preliminary and a work in progress)
- ;;
-
- mips-sony-bsd*)
- ;;
- mips-*-bsd*)
- AC_MSG_ERROR(Unknown vendor for mips-bsd configuration.)
- ;;
-
- ppc-*-aix5.*)
- AC_DEFINE(AIX_WEAK_SUPPORT, 1,
- [Define if using AIX 5.2 value for C_WEAKEXT.])
- ;;
- ppc-*-linux-*)
- case "$endian" in
- big) ;;
- *) AC_MSG_ERROR(GNU/Linux must be configured big endian) ;;
- esac
- ;;
- ppc-*-solaris*)
- if test ${this_target} = $target; then
- AC_DEFINE(TARGET_SOLARIS_COMMENT, 1,
- [Define if default target is PowerPC Solaris.])
- fi
- if test x${endian} = xbig; then
- AC_MSG_ERROR(Solaris must be configured little endian)
- fi
- ;;
-
- sh*-*-symbianelf*)
- AC_DEFINE(TARGET_SYMBIAN, 1, [Define if target is Symbian OS.])
- ;;
- esac
-
- if test ${this_target} = $target ; then
- endian_def=
- if test x${endian} = xbig; then
- endian_def=1
- elif test x${endian} = xlittle; then
- endian_def=0
- fi
- if test x${endian_def} != x; then
- AC_DEFINE_UNQUOTED(TARGET_BYTES_BIG_ENDIAN, $endian_def,
- [Define as 1 if big endian.])
- fi
- fi
-
-# Other random stuff.
-
- case ${cpu_type} in
- mips)
- # Set mips_cpu to the name of the default CPU.
- case ${target_cpu} in
- mips | mipsbe | mipseb | mipsle | mipsel | mips64 | mips64el)
- mips_cpu=from-abi
- ;;
- mipsisa32 | mipsisa32el)
- mips_cpu=mips32
- ;;
- mipsisa32r2 | mipsisa32r2el)
- mips_cpu=mips32r2
- ;;
- mipsisa64 | mipsisa64el)
- mips_cpu=mips64
- ;;
- mipsisa64r2 | mipsisa64r2el)
- mips_cpu=mips64r2
- ;;
- mipstx39 | mipstx39el)
- mips_cpu=r3900
- ;;
- mips64vr | mips64vrel)
- mips_cpu=vr4100
- ;;
- mipsisa32r2* | mipsisa64r2*)
-changequote(,)dnl
- mips_cpu=`echo $target_cpu | sed -e 's/[a-z]*..r2//' -e 's/el$//'`
-changequote([,])dnl
- ;;
- mips64* | mipsisa64* | mipsisa32*)
-changequote(,)dnl
- mips_cpu=`echo $target_cpu | sed -e 's/[a-z]*..//' -e 's/el$//'`
-changequote([,])dnl
- ;;
- *)
- AC_ERROR($target_cpu isn't a supported MIPS CPU name)
- ;;
- esac
- # See whether it's appropriate to set E_MIPS_ABI_O32 for o32
- # binaries. It's a GNU extension that some OSes don't understand.
- # The value only matters on ELF targets.
- case ${target} in
- *-*-irix*)
- use_e_mips_abi_o32=0
- ;;
- *)
- use_e_mips_abi_o32=1
- ;;
- esac
- # Decide whether to generate 32-bit or 64-bit code by default.
- # Used to resolve -march=from-abi when an embedded ABI is selected.
- case ${target} in
- mips64*-*-* | mipsisa64*-*-*)
- mips_default_64bit=1
- ;;
- *)
- mips_default_64bit=0
- ;;
- esac
- # Decide which ABI to target by default.
- case ${target} in
- mips64*-linux* | mips-sgi-irix6*)
- mips_default_abi=N32_ABI
- ;;
- mips*-linux*)
- mips_default_abi=O32_ABI
- ;;
- mips64*-openbsd*)
- mips_default_abi=N64_ABI
- ;;
- *)
- mips_default_abi=NO_ABI
- ;;
- esac
- AC_DEFINE_UNQUOTED(MIPS_CPU_STRING_DEFAULT, "$mips_cpu",
- [Default CPU for MIPS targets. ])
- AC_DEFINE_UNQUOTED(USE_E_MIPS_ABI_O32, $use_e_mips_abi_o32,
- [Allow use of E_MIPS_ABI_O32 on MIPS targets. ])
- AC_DEFINE_UNQUOTED(MIPS_DEFAULT_64BIT, $mips_default_64bit,
- [Generate 64-bit code by default on MIPS targets. ])
- AC_DEFINE_UNQUOTED(MIPS_DEFAULT_ABI, $mips_default_abi,
- [Choose a default ABI for MIPS targets. ])
- ;;
- esac
-
- # Do we need the opcodes library?
- case ${cpu_type} in
- vax | i386 | tic30)
- ;;
-
- *)
- need_opcodes=yes
-
- case "${enable_shared}" in
- yes) shared_opcodes=true ;;
- *opcodes*) shared_opcodes=true ;;
- *) shared_opcodes=false ;;
- esac
- ;;
- esac
-
- # Any other special object files needed ?
- case ${cpu_type} in
-
- bfin)
- echo ${extra_objects} | grep -s "bfin-parse.o"
- if test $? -ne 0 ; then
- extra_objects="$extra_objects bfin-parse.o"
- fi
-
- echo ${extra_objects} | grep -s "bfin-lex.o"
- if test $? -ne 0 ; then
- extra_objects="$extra_objects bfin-lex.o"
- fi
- ;;
-
- fr30 | ip2k | iq2000 | m32r | openrisc)
- using_cgen=yes
- ;;
-
- m32c)
- using_cgen=yes
- ;;
- frv)
- using_cgen=yes
- ;;
- m68k)
- case ${extra_objects} in
- *m68k-parse.o*) ;;
- *) extra_objects="$extra_objects m68k-parse.o" ;;
- esac
- ;;
-
- mips)
- echo ${extra_objects} | grep -s "itbl-parse.o"
- if test $? -ne 0 ; then
- extra_objects="$extra_objects itbl-parse.o"
- fi
-
- echo ${extra_objects} | grep -s "itbl-lex.o"
- if test $? -ne 0 ; then
- extra_objects="$extra_objects itbl-lex.o"
- fi
-
- echo ${extra_objects} | grep -s "itbl-ops.o"
- if test $? -ne 0 ; then
- extra_objects="$extra_objects itbl-ops.o"
- fi
- ;;
-
- mt)
- using_cgen=yes
- ;;
-
- i386 | s390 | sparc)
- if test $this_target = $target ; then
- AC_DEFINE_UNQUOTED(DEFAULT_ARCH, "${arch}", [Default architecture.])
- fi
- ;;
-
- xstormy16)
- using_cgen=yes
- ;;
-
- xc16x)
- using_cgen=yes
- ;;
-
- xtensa)
- echo ${extra_objects} | grep -s "xtensa-relax.o"
- if test $? -ne 0 ; then
- extra_objects="$extra_objects xtensa-relax.o"
- fi
- ;;
-
- *)
- ;;
- esac
-
- if test $using_cgen = yes ; then
- case "x${extra_objects}" in
- *cgen.o*) ;;
- *) extra_objects="$extra_objects cgen.o" ;;
- esac
- fi
-
-# See if we really can support this configuration with the emulation code.
-
- if test $this_target = $target ; then
- obj_format=$fmt
- te_file=$em
- fi
-
-# From target name and format, produce a list of supported emulations.
-
- case ${generic_target}-${fmt} in
- mips-*-irix5*-*) emulation="mipsbelf mipslelf mipself mipsbecoff mipslecoff mipsecoff" ;;
- mips*-*-linux*-*) case "$endian" in
- big) emulation="mipsbelf mipslelf mipself" ;;
- *) emulation="mipslelf mipsbelf mipself" ;;
- esac ;;
- mips-*-lnews*-ecoff) ;;
- mips-*-*-ecoff) case "$endian" in
- big) emulation="mipsbecoff mipslecoff mipsecoff" ;;
- *) emulation="mipslecoff mipsbecoff mipsecoff" ;;
- esac ;;
- mips-*-*-elf) case "$endian" in
- big) emulation="mipsbelf mipslelf mipself" ;;
- *) emulation="mipslelf mipsbelf mipself" ;;
- esac ;;
- mips-*-sysv4*MP*-*) emulation="mipsbelf mipslelf mipself mipsbecoff mipslecoff mipsecoff" ;;
- # i386-pc-pe-coff != i386-pc-coff.
- i386-*-pe-coff) ;;
- # Uncommenting the next line will turn on support for i386 AOUT
- # for the default linux configuration
- # i386-*-linux*-elf) emulation="i386elf i386aout" ;;
- #
- i386-*-aout) emulation="i386aout" ;;
- i386-*-coff) emulation="i386coff" ;;
- i386-*-elf) emulation="i386elf" ;;
-
- # Always all formats. The first stated emulation becomes the default.
- cris-*-*aout*) emulation="crisaout criself" ;;
- cris-*-*) emulation="criself crisaout" ;;
- esac
-
- emulations="$emulations $emulation"
-
-done
-
-# Turn on all targets if possible
-if test ${all_targets} = "yes"; then
- case ${target_cpu_type} in
- i386)
- case ${obj_format} in
- aout)
- emulations="$emulations i386coff i386elf"
- ;;
- coff)
- emulations="$emulations i386aout i386elf"
- ;;
- elf)
- emulations="$emulations i386aout i386coff"
- ;;
- esac
- ;;
- esac
-fi
-
-# Assign floating point type. Most processors with FP support
-# IEEE FP. On those that don't support FP at all, usually IEEE
-# is emulated.
-case ${target_cpu} in
- vax | tahoe ) atof=${target_cpu} ;;
- pdp11) atof=vax ;;
- *) atof=ieee ;;
-esac
-
-case "${obj_format}" in
- "") AC_MSG_ERROR(GAS does not know what format to use for target ${target}) ;;
-esac
-
-# Unfortunately the cpu in cpu-opc.h file isn't always $(TARGET_CPU).
-cgen_cpu_prefix=""
-if test $using_cgen = yes ; then
- case ${target_cpu} in
- *) cgen_cpu_prefix=${target_cpu} ;;
- esac
- AC_SUBST(cgen_cpu_prefix)
- AC_DEFINE(USING_CGEN, 1, [Using cgen code?])
-fi
-
-dnl
-dnl Make sure the desired support files exist.
-dnl
-
-if test ! -r ${srcdir}/config/tc-${target_cpu_type}.c; then
- AC_MSG_ERROR(GAS does not support target CPU ${target_cpu_type})
-fi
-
-if test ! -r ${srcdir}/config/obj-${obj_format}.c; then
- AC_MSG_ERROR(GAS does not have support for object file format ${obj_format})
-fi
-
-# Some COFF configurations want these random other flags set.
-case ${obj_format} in
- coff)
- case ${target_cpu_type} in
- i386) AC_DEFINE(I386COFF, 1, [Using i386 COFF?]) ;;
- m68k) AC_DEFINE(M68KCOFF, 1, [Using m68k COFF?]) ;;
- m88k) AC_DEFINE(M88KCOFF, 1, [Using m88k COFF?]) ;;
- esac
- ;;
-esac
-
-# Getting this done right is going to be a bitch. Each configuration specified
-# with --enable-targets=... should be checked for environment, format, cpu
-# setting.
-#
-# For each configuration, the necessary object file support code must be linked
-# in. This might be only one, it might be up to four. The necessary emulation
-# code needs to be provided, too.
-#
-# And then there's "--enable-targets=all"....
-#
-# For now, just always do it for MIPS ELF or ECOFF configurations. Sigh.
-
-formats="${obj_format}"
-emfiles=""
-EMULATIONS=""
-GAS_UNIQ(emulations)
-for em in . $emulations ; do
- case $em in
- .) continue ;;
- mipsbelf | mipslelf | mipself)
- fmt=elf file=mipself ;;
- mipsbecoff | mipslecoff | mipsecoff)
- fmt=ecoff file=mipsecoff ;;
- *coff)
- fmt=coff file=$em ;;
- *aout)
- fmt=aout file=$em ;;
- *elf)
- fmt=elf file=$em ;;
- esac
- formats="$formats $fmt"
- emfiles="$emfiles e-$file.o"
- EMULATIONS="$EMULATIONS &$em,"
-done
-GAS_UNIQ(formats)
-GAS_UNIQ(emfiles)
-if test `set . $formats ; shift ; echo $#` -gt 1 ; then
- for fmt in $formats ; do
- case $fmt in
- aout) AC_DEFINE(OBJ_MAYBE_AOUT, 1, [a.out support?]) ;;
- bout) AC_DEFINE(OBJ_MAYBE_BOUT, 1, [b.out support?]) ;;
- coff) AC_DEFINE(OBJ_MAYBE_COFF, 1, [COFF support?]) ;;
- ecoff) AC_DEFINE(OBJ_MAYBE_ECOFF, 1, [ECOFF support?]) ;;
- elf) AC_DEFINE(OBJ_MAYBE_ELF, 1, [ELF support?]) ;;
- generic) AC_DEFINE(OBJ_MAYBE_GENERIC, 1, [generic support?]) ;;
- ieee) AC_DEFINE(OBJ_MAYBE_IEEE, 1, [IEEE support?]) ;;
- som) AC_DEFINE(OBJ_MAYBE_SOM, 1, [SOM support?]) ;;
- esac
- extra_objects="$extra_objects obj-$fmt.o"
- done
- obj_format=multi
-fi
-if test `set . $emfiles ; shift ; echo $#` -gt 0 ; then
- DEFAULT_EMULATION=`set . $emulations ; echo $2`
- # e-mips* has more than one emulation per file, e-i386* has just one at the
- # moment. If only one emulation is specified, then don't define
- # USE_EMULATIONS or include any of the e-files as they will only be bloat.
- case "${obj_format}${emfiles}" in
- multi* | *mips*)
- extra_objects="$extra_objects $emfiles"
- AC_DEFINE(USE_EMULATIONS, 1, [Use emulation support?]) ;;
- esac
-fi
-AC_SUBST(extra_objects)
-AC_DEFINE_UNQUOTED(EMULATIONS, $EMULATIONS, [Supported emulations.])
-AC_DEFINE_UNQUOTED(DEFAULT_EMULATION, "$DEFAULT_EMULATION",
- [Default emulation.])
-
-reject_dev_configs=yes
-
-case ${reject_dev_configs}-${dev} in
- yes-yes) # Oops.
- AC_MSG_ERROR(GAS does not support the ${generic_target} configuration.)
- ;;
-esac
-
-AC_SUBST(target_cpu_type)
-AC_SUBST(obj_format)
-AC_SUBST(te_file)
-AC_SUBST(install_tooldir)
-AC_SUBST(atof)
-dnl AC_SUBST(emulation)
-
-# do we need the opcodes library?
-case "${need_opcodes}" in
-yes)
- OPCODES_LIB=../opcodes/libopcodes.la
- ;;
-esac
-
-BFDLIB=../bfd/libbfd.la
-BFDVER_H=../bfd/bfdver.h
-ALL_OBJ_DEPS="$ALL_OBJ_DEPS"' ../bfd/bfd.h $(INCDIR)/symcat.h'
-
-AC_SUBST(BFDLIB)
-AC_SUBST(OPCODES_LIB)
-
-AC_SUBST(BFDVER_H)
-AC_SUBST(ALL_OBJ_DEPS)
-
-AC_DEFINE_UNQUOTED(TARGET_ALIAS, "${target_alias}", [Target alias.])
-AC_DEFINE_UNQUOTED(TARGET_CANONICAL, "${target}", [Canonical target.])
-AC_DEFINE_UNQUOTED(TARGET_CPU, "${target_cpu}", [Target CPU.])
-AC_DEFINE_UNQUOTED(TARGET_VENDOR, "${target_vendor}", [Target vendor.])
-AC_DEFINE_UNQUOTED(TARGET_OS, "${target_os}", [Target OS.])
-
-AC_PROG_CC
-
-AC_PROG_YACC
-AM_PROG_LEX
-
-ALL_LINGUAS="fr tr es rw"
-CY_GNU_GETTEXT
-
-AM_MAINTAINER_MODE
-AC_EXEEXT
-
-AC_CHECK_HEADERS(string.h stdlib.h memory.h strings.h unistd.h stdarg.h varargs.h errno.h sys/types.h)
-
-# Put this here so that autoconf's "cross-compiling" message doesn't confuse
-# people who are not cross-compiling but are compiling cross-assemblers.
-AC_MSG_CHECKING(whether compiling a cross-assembler)
-if test "${host}" = "${target}"; then
- cross_gas=no
-else
- cross_gas=yes
- AC_DEFINE(CROSS_COMPILE, 1, [Compiling cross-assembler?])
-fi
-AC_MSG_RESULT($cross_gas)
-
-dnl ansidecl.h will deal with const
-dnl AC_CONST
-AC_FUNC_ALLOCA
-AC_C_INLINE
-
-# VMS doesn't have unlink.
-AC_CHECK_FUNCS(unlink remove, break)
-
-# Some systems don't have sbrk().
-AC_CHECK_FUNCS(sbrk)
-
-# do we need the math library?
-case "${need_libm}" in
-yes)
- AC_CHECK_LIBM
- AC_SUBST(LIBM)
- ;;
-esac
-
-# Some non-ANSI preprocessors botch requoting inside strings. That's bad
-# enough, but on some of those systems, the assert macro relies on requoting
-# working properly!
-GAS_WORKING_ASSERT
-
-# On some systems, the system header files may not declare malloc, realloc,
-# and free. There are places where gas needs these functions to have been
-# declared -- such as when taking their addresses.
-gas_test_headers="
-#ifdef HAVE_MEMORY_H
-#include <memory.h>
-#endif
-#ifdef HAVE_STRING_H
-#include <string.h>
-#else
-#ifdef HAVE_STRINGS_H
-#include <strings.h>
-#endif
-#endif
-#ifdef HAVE_STDLIB_H
-#include <stdlib.h>
-#endif
-#ifdef HAVE_UNISTD_H
-#include <unistd.h>
-#endif
-"
-
-# Does errno.h declare errno, or do we have to add a separate declaration
-# for it?
-GAS_CHECK_DECL_NEEDED(errno, f, int f, [
-#ifdef HAVE_ERRNO_H
-#include <errno.h>
-#endif
-])
-
-AC_MSG_CHECKING(for a known getopt prototype in unistd.h)
-AC_CACHE_VAL(gas_cv_decl_getopt_unistd_h,
-[AC_TRY_COMPILE([#include <unistd.h>], [extern int getopt (int, char *const*, const char *);],
-gas_cv_decl_getopt_unistd_h=yes, gas_cv_decl_getopt_unistd_h=no)])
-AC_MSG_RESULT($gas_cv_decl_getopt_unistd_h)
-if test $gas_cv_decl_getopt_unistd_h = yes; then
- AC_DEFINE([HAVE_DECL_GETOPT], 1,
- [Is the prototype for getopt in <unistd.h> in the expected format?])
-fi
-
-GAS_CHECK_DECL_NEEDED(environ, f, char **f, $gas_test_headers)
-GAS_CHECK_DECL_NEEDED(ffs, f, int (*f)(int), $gas_test_headers)
-GAS_CHECK_DECL_NEEDED(free, f, void (*f)(), $gas_test_headers)
-GAS_CHECK_DECL_NEEDED(malloc, f, char *(*f)(), $gas_test_headers)
-GAS_CHECK_DECL_NEEDED(sbrk, f, char *(*f)(), $gas_test_headers)
-GAS_CHECK_DECL_NEEDED(strstr, f, char *(*f)(), $gas_test_headers)
-
-AC_CHECK_DECLS([vsnprintf])
-
-dnl Required for html and install-html targets.
-AC_SUBST(datarootdir)
-AC_SUBST(docdir)
-AC_SUBST(htmldir)
-
-dnl This must come last.
-
-dnl We used to make symlinks to files in the source directory, but now
-dnl we just use the right name for .c files, and create .h files in
-dnl the build directory which include the right .h file. Make sure
-dnl the old symlinks don't exist, so that a reconfigure in an existing
-dnl directory behaves reasonably.
-
-AC_CONFIG_FILES(Makefile doc/Makefile po/Makefile.in:po/Make-in)
-AC_CONFIG_COMMANDS([default],
-[rm -f targ-cpu.c targ-cpu.h obj-format.h obj-format.c targ-env.h atof-targ.c itbl-cpu.h
- echo '#include "tc-'"${target_cpu_type}"'.h"' > targ-cpu.h
- echo '#include "obj-'"${obj_format}"'.h"' > obj-format.h
- echo '#include "te-'"${te_file}"'.h"' > targ-env.h
- echo '#include "itbl-'"${target_cpu_type}"'.h"' > itbl-cpu.h
- if test "x$cgen_cpu_prefix" != x ; then
- echo '#include "opcodes/'"${cgen_cpu_prefix}"'-desc.h"' > cgen-desc.h
- fi
-
- sed -e '/POTFILES =/r po/POTFILES' po/Makefile.in > po/Makefile],
-[target_cpu_type=${target_cpu_type}
- cgen_cpu_prefix=${cgen_cpu_prefix}
- obj_format=${obj_format}
- te_file=${te_file}])
-
-AC_OUTPUT