path: root/res/values-ast-rES/arrays.xml

<?xml version="1.0" encoding="utf-8"?>
<!--Generated by crowdin.com-->
<!--
/*
**
** Copyright 2007 The Android Open Source Project
**
** Licensed under the Apache License, Version 2.0 (the "License");
** you may not use this file except in compliance with the License.
** You may obtain a copy of the License at
**
**     http://www.apache.org/licenses/LICENSE-2.0
**
** Unless required by applicable law or agreed to in writing, software
** distributed under the License is distributed on an "AS IS" BASIS,
** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
** See the License for the specific language governing permissions and
** limitations under the License.
*/
-->
<resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2">
  <!-- Choices for timezone picker first level.
         These values will be used as search terms for TimeZone displayName
         strings. -->
  <!-- The time zone picker screen has two levels.  The first level allows the user to choose a region. -->
  <!-- Display settings.  The delay in inactivity before the screen is turned off. These are shown in a list dialog. -->
  <string-array name="screen_timeout_entries">
    <item>15 seconds</item>
    <item>30 seconds</item>
    <item>1 minutu</item>
    <item>2 minutos</item>
    <item>5 minutos</item>
    <item>10 minutos</item>
    <item>30 minutos</item>
  </string-array>
  <!-- Do not translate. -->
  <!-- Display settings.  The delay in inactivity before the dream is shown. These are shown in a list dialog. -->
  <string-array name="dream_timeout_entries">
    <item>Never</item>
    <item>15 seconds</item>
    <item>30 seconds</item>
    <item>1 minutu</item>
    <item>2 minutos</item>
    <item>5 minutos</item>
    <item>10 minutos</item>
    <item>30 minutos</item>
  </string-array>
  <!-- Do not translate. -->
  <!-- Security settings.  The delay after screen is turned off until device locks.
         These are shown in a list dialog. -->
  <string-array name="lock_after_timeout_entries">
    <item>Immediately</item>
    <item>5 segundos</item>
    <item>15 segundos</item>
    <item>30 segundos</item>
    <item>1 minutu</item>
    <item>2 minutos</item>
    <item>5 minutos</item>
    <item>10 minutos</item>
    <item>30 minutos</item>
  </string-array>
  <!-- Do not translate. -->
  <string-array name="entries_font_size">
    <item msgid="6490061470416867723">Small</item>
    <item msgid="3579015730662088893">Normal</item>
    <item msgid="1678068858001018666">Large</item>
    <item msgid="490158884605093126">Huge</item>
  </string-array>
  <!-- TTS settings -->
  <!-- Default speech rate choices -->
  <string-array name="tts_rate_entries">
    <item>Very slow</item>
    <item>Slow</item>
    <item>Normal</item>
    <item>Fast</item>
    <item>Faster</item>
    <item>Very fast</item>
    <item>Rapid</item>
    <item>Very rapid</item>
    <item>Fastest</item>
  </string-array>
  <!-- Do not translate. -->
  <string-array name="tts_rate_values">
    <item>60</item>
    <item>80</item>
    <item>100</item>
    <item>150</item>
    <item>200</item>
    <item>250</item>
    <item>300</item>
    <item>350</item>
    <item>400</item>
  </string-array>
  <!-- Default pitch choices -->
  <string-array name="tts_pitch_entries">
    <item>Very low</item>
    <item>Low</item>
    <item>Normal</item>
    <item>High</item>
    <item>Very high</item>
  </string-array>
  <!-- Do not translate. -->
  <string-array name="tts_pitch_values">
    <item>50</item>
    <item>80</item>
    <item>100</item>
    <item>120</item>
    <item>150</item>
  </string-array>
  <!-- Do not translate. -->
  <!-- Wi-Fi settings -->
  <!-- Match this with the order of NetworkInfo.DetailedState. -->
  <!-- Wi-Fi settings. The status messages when the network is unknown. -->
  <string-array name="wifi_status">
    <!-- Status message of Wi-Fi when it is idle. -->
    <item></item>
    <!-- Status message of Wi-Fi when it is scanning. -->
    <item>Escaniando\u2026</item>
    <!-- Status message of Wi-Fi when it is connecting. -->
    <item>Connecting\u2026</item>
    <!-- Status message of Wi-Fi when it is authenticating. -->
    <item>Authenticating\u2026</item>
    <!-- Status message of Wi-Fi when it is obtaining IP address. -->
    <item>Consiguiendo direición IP\u2026</item>
    <!-- Status message of Wi-Fi when it is connected. -->
    <item>Connected</item>
    <!-- Status message of Wi-Fi when it is suspended. -->
    <item>Suspended</item>
    <!-- Status message of Wi-Fi when it is disconnecting. -->
    <item>Disconnecting\u2026</item>
    <!-- Status message of Wi-Fi when it is disconnected. -->
    <item>Disconnected</item>
    <!-- Status message of Wi-Fi when it is a failure. -->
    <item>Unsuccessful</item>
    <!-- Status message of Wi-Fi when it is blocked. -->
    <item>Blocked</item>
    <!-- Status message of Wi-Fi when connectiong is being verified. -->
    <item>Temporarily avoiding poor connection</item>
  </string-array>
  <!-- Match this with the order of NetworkInfo.DetailedState. -->
  <!-- Wi-Fi settings. The status messages when the network is known. -->
  <string-array name="wifi_status_with_ssid">
    <!-- Status message of Wi-Fi when it is idle. -->
    <item></item>
    <!-- Status message of Wi-Fi when it is scanning. -->
    <item>Escaniando\u2026</item>
    <!-- Status message of Wi-Fi when it is connecting to a network. -->
    <item>Connecting to <xliff:g id="network_name">%1$s</xliff:g>\u2026</item>
    <!-- Status message of Wi-Fi when it is authenticating with a network. -->
    <item>Authenticating with <xliff:g id="network_name">%1$s</xliff:g>\u2026</item>
    <!-- Status message of Wi-Fi when it is obtaining IP address from a network. -->
    <item>Consiguiendo direición IP de <xliff:g id="NETWORK_NAME">%1$s</xliff:g>\u2026</item>
    <!-- Status message of Wi-Fi when it is connected to a network. -->
    <item>Connected to <xliff:g id="network_name">%1$s</xliff:g></item>
    <!-- Status message of Wi-Fi when it is suspended. -->
    <item>Suspended</item>
    <!-- Status message of Wi-Fi when it is disconnecting from a network. -->
    <item>Disconnecting from <xliff:g id="network_name">%1$s</xliff:g>\u2026</item>
    <!-- Status message of Wi-Fi when it is disconnected. -->
    <item>Disconnected</item>
    <!-- Status message of Wi-Fi when it is a failure. -->
    <item>Unsuccessful</item>
    <!-- Status message of Wi-Fi when it is blocked. -->
    <item>Blocked</item>
    <!-- Status message of Wi-Fi when connectiong is being verified. -->
    <item>Temporarily avoiding poor connection</item>
  </string-array>
  <!-- Match this with the constants in AccessPoint. -->
  <!-- Wi-Fi security choices used when manually added a Wi-Fi network -->
  <string-array name="wifi_security">
    <!-- The Wi-Fi network does not have any security. -->
    <item>@string/wifi_security_none</item>
    <!-- Do not translate. -->
    <item>@string/wifi_security_wep</item>
    <!-- Do not translate. -->
    <item>@string/wifi_security_psk_generic</item>
    <!-- Do not translate. -->
    <item>@string/wifi_security_eap</item>
  </string-array>
  <!-- Match this with the constants in AccessPoint. -->
  <!-- Wi-Fi security types for New User Dialog. EAP is not configurable. -->
  <string-array name="wifi_security_no_eap">
    <!-- The Wi-Fi network does not have any security. -->
    <item>@string/wifi_security_none</item>
    <!-- Do not translate. -->
    <item>@string/wifi_security_wep</item>
    <!-- Do not translate. -->
    <item>@string/wifi_security_psk_generic</item>
  </string-array>
  <!-- Wi-Fi AP settings.  The type of security a Wi-Fi AP supports. -->
  <!-- Note that adding/removing/moving the items will need wifi settings code change. -->
  <string-array name="wifi_ap_security">
    <item>@string/wifi_security_none</item>
    <item>@string/wifi_security_wpa2</item>
  </string-array>
  <!-- Match this with the constants in WifiDialog. -->
  <!-- Wi-Fi settings.  The type of EAP method a Wi-Fi network has. -->
  <string-array name="wifi_eap_method">
    <!-- Do not translate. -->
    <item>PEAP</item>
    <!-- Do not translate. -->
    <item>TLS</item>
    <!-- Do not translate. -->
    <item>TTLS</item>
    <!-- Do not translate. -->
    <item>PWD</item>
    <!-- Do not translate. -->
    <item>SIM</item>
    <!-- Do not translate. -->
    <item>AKA</item>
    <!-- Do not translate. -->
    <item>AKA\'</item>
  </string-array>
  <!-- Type of EAP method when EAP SIM, AKA, AKA' are not supported -->
  <string-array name="eap_method_without_sim_auth">
    <!-- Do not translate. -->
    <item>PEAP</item>
    <!-- Do not translate. -->
    <item>TLS</item>
    <!-- Do not translate. -->
    <item>TTLS</item>
    <!-- Do not translate. -->
    <item>PWD</item>
  </string-array>
  <!-- Wi-Fi AP band settings.  Either 2.4GHz or 5GHz. -->
  <!-- Note that adding/removing/moving the items will need wifi settings code change. -->
  <string-array name="wifi_ap_band_config_full">
    <item>@string/wifi_ap_choose_2G</item>
    <item>@string/wifi_ap_choose_5G</item>
  </string-array>
  <string-array name="wifi_ap_band_config_2G_only">
    <item>@string/wifi_ap_choose_2G</item>
  </string-array>
  <!-- Wi-Fi WPS setup for p2p connections.  -->
  <!-- Note that adding/removing/moving the items will need wifi settings code change. -->
  <!-- Match this with the order of WifiP2pDevice.Status -->
  <!-- Wi-Fi p2p settings device status message -->
  <!-- Bluetooth Settings -->
  <!-- Discoverable mode timeout options -->
  <string-array name="bluetooth_visibility_timeout_entries">
    <item>2 minutos</item>
    <item>5 minutos</item>
    <item>1 hour</item>
    <item>Never time out</item>
  </string-array>
  <!-- Match this with drawable.wifi_signal. -->
  <!-- Wi-Fi settings. The signal strength a Wi-Fi network has. -->
  <!-- Wi-Fi settings. Presented as a list dialog to the user to choose the Wi-Fi sleep policy. -->
  <string-array name="wifi_sleep_policy_entries">
    <!-- Always keep Wi-Fi on when screen turns off. -->
    <item>Always</item>
    <!-- Keep Wi-Fi on when screen turns off and plugged in.  When on battery, go to sleep when screen turns off. -->
    <item>Only when plugged in</item>
    <!-- Do not keep Wi-Fi on when screen turns off.  [CHAR LIMIT=40] -->
    <item>Enxamás</item>
  </string-array>
  <!-- Wi-Fi settings. Presented as a list dialog to the user to choose the Wi-Fi sleep policy. Used when
         the device is Wi-Fi-only. [CHAR LIMIT=30] -->
  <string-array name="wifi_sleep_policy_entries_wifi_only">
    <!-- Always keep Wi-Fi on when screen turns off. -->
    <item>Siempres</item>
    <!-- Keep Wi-Fi on when screen turns off and plugged in.  When on battery, go to sleep when screen turns off. -->
    <item>Namái al enchufar</item>
    <!-- Do not keep Wi-Fi on when screen turns off, for Wi-Fi-only devices, no other data connection -->
    <item>Enxamás</item>
  </string-array>
  <!-- Match with wifi_sleep_policy_entries and the values of the settings in Settings class. -->
  <!-- Do not translate. -->
  <string-array name="wifi_sleep_policy_values">
    <!-- Do not translate. -->
    <item>2</item>
    <!-- Do not translate. -->
    <item>1</item>
    <!-- Do not translate. -->
    <item>0</item>
  </string-array>
  <!-- Data Usage settings. Range of data usage. -->
  <!-- Wi-Fi settings. Presented as a list dialog to the user to choose the Wi-Fi frequency band. -->
  <string-array name="wifi_frequency_band_entries">
    <!-- Operation on both 2.4 GHz and 5 GHz [CHAR LIMIT=25]-->
    <item>Automatic</item>
    <!-- Operation on 5 GHz alone [CHAR LIMIT=25]-->
    <item>Namái 5 GHz</item>
    <!-- Operation on 2.4 GHz alone [CHAR LIMIT=25]-->
    <item>Namái 2,4 GHz</item>
  </string-array>
  <!-- Match with wifi_frequency_band_entries and the values of the settings in WifiManager. -->
  <!-- Do not translate. -->
  <string-array name="wifi_frequency_band_values">
    <!-- Do not translate. -->
    <item>0</item>
    <!-- Do not translate. -->
    <item>1</item>
    <!-- Do not translate. -->
    <item>2</item>
  </string-array>
  <!-- Display options for UsageStats class -->
  <string-array name="usage_stats_display_order_types">
    <item>Tiempu d\'usu</item>
    <item>Last time used</item>
    <item>Nome d\'aplicación</item>
  </string-array>
  <!-- EAP method -->
  <string-array name="wifi_eap_entries">
    <item>PEAP</item>
    <item>TLS</item>
    <item>TTLS</item>
    <item>PWD</item>
  </string-array>
  <!-- Phase 2 options for PEAP -->
  <!-- Phase 2 options for rest of EAP methods -->
  <!-- Wi-Fi IP settings. -->
  <!-- Note that adding/removing/moving the items will need wifi settings code change. -->
  <!-- Wi-Fi proxy settings. -->
  <!-- Note that adding/removing/moving the items will need wifi settings code change. -->
  <string-array name="wifi_proxy_settings">
    <!-- No HTTP proxy is used for the current wifi network [CHAR LIMIT=25] -->
    <item>None</item>
    <!-- Manual HTTP proxy settings are used for the current wifi network [CHAR LIMIT=25] -->
    <item>Manual</item>
    <!-- Proxy Auto-Config URL that is used for the current wifi network [CHAR LIMIT=25] -->
    <item>Auto-configuración</item>
  </string-array>
  <!-- Authentication Types used in APN editor -->
  <!-- Authentication Types used in APN editor -->
  <!-- Bearer Info used in APN editor -->
  <string-array name="bearer_entries">
    <item>Unspecified</item>
    <item>LTE</item>
    <item>HSPAP</item>
    <item>HSPA</item>
    <item>HSUPA</item>
    <item>HSDPA</item>
    <item>UMTS</item>
    <item>EDGE</item>
    <item>GPRS</item>
    <item>eHRPD</item>
    <item>EVDO_B</item>
    <item>EVDO_A</item>
    <item>EVDO_0</item>
    <item>1xRTT</item>
    <item>IS95B</item>
    <item>IS95A</item>
  </string-array>
  <!-- MVNO Info used in APN editor -->
  <string-array name="mvno_type_entries">
    <item>None</item>
    <!-- Do not translate. -->
    <item>SPN</item>
    <!-- Do not translate. -->
    <item>IMSI</item>
    <!-- Do not translate. -->
    <item>GID</item>
  </string-array>
  <!-- Apps on SD installation location options in ApplicationSettings -->
  <!-- Do not translate. -->
  <!-- Names of categories of app ops tabs -->
  <string-array name="app_ops_categories">
    <item>Allugamientu</item>
    <item>Personal</item>
    <item>Mensaxes</item>
    <item>Media</item>
    <item>Preséu</item>
  </string-array>
  <!-- User display names for app ops codes -->
  <string-array name="app_ops_summaries">
    <item>coarse location</item>
    <item>fine location</item>
    <item>GPS</item>
    <item>vibrate</item>
    <item>read contacts</item>
    <item>modify contacts</item>
    <item>read call log</item>
    <item>modify call log</item>
    <item>read calendar</item>
    <item>modify calendar</item>
    <item>wi-fi scan</item>
    <item>notification</item>
    <item>cell scan</item>
    <item>call phone</item>
    <item>read SMS</item>
    <item>write SMS</item>
    <item>receive SMS</item>
    <item>receive emergency SMS</item>
    <item>receive MMS</item>
    <item>receive WAP push</item>
    <item>send SMS</item>
    <item>read ICC SMS</item>
    <item>write ICC SMS</item>
    <item>modify settings</item>
    <item>draw on top</item>
    <item>access notifications</item>
    <item>camera</item>
    <item>record audio</item>
    <item>play audio</item>
    <item>read clipboard</item>
    <item>modify clipboard</item>
    <item>media buttons</item>
    <item>audio focus</item>
    <item>master volume</item>
    <item>voice volume</item>
    <item>ring volume</item>
    <item>media volume</item>
    <item>alarm volume</item>
    <item>notification volume</item>
    <item>bluetooth volume</item>
    <item>keep awake</item>
    <item>monitor location</item>
    <item>monitor high power location</item>
    <item>get usage stats</item>
    <item>mute/unmute microphone</item>
    <item>project media</item>
    <item>activate VPN</item>
    <item>write wallpaper</item>
    <item>assist structure</item>
    <item>assist screenshot</item>
  </string-array>
  <!-- User display names for app ops codes -->
  <string-array name="app_ops_labels">
    <item>Allugamientu</item>
    <item>Allugamientu</item>
    <item>Allugamientu</item>
    <item>Vibrate</item>
    <item>Read contacts</item>
    <item>Modify contacts</item>
    <item>Read call log</item>
    <item>Modify call log</item>
    <item>Read calendar</item>
    <item>Modify calendar</item>
    <item>Allugamientu</item>
    <item>Post notification</item>
    <item>Allugamientu</item>
    <item>Call phone</item>
    <item>Read SMS/MMS</item>
    <item>Write SMS/MMS</item>
    <item>Receive SMS/MMS</item>
    <item>Receive SMS/MMS</item>
    <item>Receive SMS/MMS</item>
    <item>Receive SMS/MMS</item>
    <item>Send SMS/MMS</item>
    <item>Read SMS/MMS</item>
    <item>Write SMS/MMS</item>
    <item>Modify settings</item>
    <item>Draw on top</item>
    <item>Access notifications</item>
    <item>Cámara</item>
    <item>Grabar audiu</item>
    <item>Reproducir audiu</item>
    <item>Read clipboard</item>
    <item>Modify clipboard</item>
    <item>Media buttons</item>
    <item>Audio focus</item>
    <item>Master volume</item>
    <item>Voice volume</item>
    <item>Ring volume</item>
    <item>Media volume</item>
    <item>Alarm volume</item>
    <item>Notification volume</item>
    <item>Bluetooth volume</item>
    <item>Keep awake</item>
    <item>Allugamientu</item>
    <item>Allugamientu</item>
    <item>Get usage stats</item>
    <item>Mute/unmute microphone</item>
    <item>Project media</item>
    <item>Activate VPN</item>
    <item>Write wallpaper</item>
    <item>Assist structure</item>
    <item>Assist screenshot</item>
  </string-array>
  <!-- Titles for the list of long press timeout options. -->
  <!-- Values for the list of long press timeout options. -->
  <!-- Titles for captioning typeface preference. [CHAR LIMIT=35] -->
  <string-array name="captioning_typeface_selector_titles">
    <item>Default</item>
    <item>Sans-serif</item>
    <item>Sans-serif condensed</item>
    <item>Sans-serif monospace</item>
    <item>Serif</item>
    <item>Serif monospace</item>
    <item>Casual</item>
    <item>Cursive</item>
    <item>Small capitals</item>
  </string-array>
  <!-- Values for captioning typeface preference. -->
  <!-- Titles for captioning font size preference. [CHAR LIMIT=35] -->
  <string-array name="captioning_font_size_selector_titles">
    <item>Very small</item>
    <item>Small</item>
    <item>Mediana</item>
    <item>Large</item>
    <item>Very large</item>
  </string-array>
  <!-- Values for captioning font size preference. -->
  <!-- Titles for captioning character edge type preference. [CHAR LIMIT=35] -->
  <!-- Values for captioning character edge type preference. -->
  <!-- Titles for captioning color preference. -->
  <!-- Values for captioning color preference. -->
  <!-- Titles for captioning opacity preference. [CHAR LIMIT=35] -->
  <string-array name="captioning_opacity_selector_titles">
    <item>25%</item>
    <item>50%</item>
    <item>75%</item>
    <item>100%</item>
  </string-array>
  <!-- Values for captioning opacity preference. -->
  <!-- Titles for captioning text style preset preference. [CHAR LIMIT=35] -->
  <!-- Values for captioning text style preset preference. -->
  <!-- Titles for logd limit size selection preference. [CHAR LIMIT=14] -->
  <string-array name="select_logd_size_titles">
    <item>64K</item>
    <item>256K</item>
    <item>1M</item>
    <item>4M</item>
    <item>16M</item>
  </string-array>
  <!-- Titles for logd limit size lowram selection preference. [CHAR LIMIT=14] -->
  <string-array name="select_logd_size_lowram_titles">
    <item>64K</item>
    <item>256K</item>
    <item>1M</item>
  </string-array>
  <!-- Values for logd limit size selection preference. -->
  <!-- Summaries for logd limit size selection preference. [CHAR LIMIT=30]-->
  <!-- Titles for HDCP checking preference. [CHAR LIMIT=35] -->
  <!-- Values for HDCP checking preference. -->
  <!-- Summaries for HDCP checking preference. [CHAR LIMIT=100]-->
  <!-- Titles for window animation scale preference. [CHAR LIMIT=35] -->
  <!-- Values for window animation scale preference. -->
  <!-- Titles for transition animation scale preference. [CHAR LIMIT=35] -->
  <!-- Values for transition animation scale preference. -->
  <!-- Titles for animator duration scale preference. [CHAR LIMIT=35] -->
  <!-- Values for animator duration scale preference. -->
  <!-- Titles for overlay display devices preference. [CHAR LIMIT=35] -->
  <string-array name="overlay_display_devices_entries">
    <item>None</item>
    <item>480p</item>
    <item>480p (secure)</item>
    <item>720p</item>
    <item>720p (secure)</item>
    <item>1080p</item>
    <item>1080p (secure)</item>
    <item>4K</item>
    <item>4K (secure)</item>
    <item>4K (upscaled)</item>
    <item>4K (upscaled, secure)</item>
    <item>720p, 1080p (dual screen)</item>
  </string-array>
  <!-- Values for overlay display devices preference. -->
  <!-- Titles for OpenGL traces preference. [CHAR LIMIT=35] -->
  <!-- Values for OpenGL traces preference. -->
  <!-- Titles for non-rectangular clipping preference. [CHAR LIMIT=35] -->
  <!-- Values for non-rectangular clipping preference. -->
  <!-- Titles for frame time tracking preference. [CHAR LIMIT=35] -->
  <!-- Values for frame time tracking preference. -->
  <!-- Titles for debug overdraw preference. [CHAR LIMIT=50] -->
  <!-- Values for debug overdraw preference. -->
  <!-- Titles for app process limit preference. [CHAR LIMIT=35] -->
  <string-array name="app_process_limit_entries">
    <item>Llende estándar</item>
    <item>No background processes</item>
    <item>Polo menos 1 procesu</item>
    <item>Polo menos 2 procesos</item>
    <item>Polo menos 3 procesos</item>
    <item>Polo menos 4 procesos</item>
  </string-array>
  <!-- Values for app process limit preference. -->
  <!-- Match this with the constants in VpnProfile. -->
  <!-- Short names for each VPN type, not really translatable. [CHAR LIMIT=20] -->
  <!-- Match this with the constants in VpnProfile. -->
  <!-- Longer descriptions for each VPN type. [CHAR LIMIT=100] -->
  <string-array name="vpn_types_long">
    <item>VPN PPTP</item>
    <item>L2TP/IPSec VPN with pre-shared keys</item>
    <item>L2TP/IPSec VPN with certificates</item>
    <item>IPSec VPN with pre-shared keys and Xauth authentication</item>
    <item>IPSec VPN with certificates and Xauth authentication</item>
    <item>IPSec VPN with certificates and hybrid authentication</item>
  </string-array>
  <!-- Match this with the constants in LegacyVpnInfo. -->
  <!-- Status for a VPN network. [CHAR LIMIT=100] -->
  <string-array name="vpn_states">
    <!-- Status message when VPN is disconnected. -->
    <item>Disconnected</item>
    <!-- Status message when VPN is initializing. -->
    <item>Aniciando\u2026</item>
    <!-- Status message when VPN is connecting. -->
    <item>Coneutando\u2026</item>
    <!-- Status message when VPN is connected. -->
    <item>Connected</item>
    <!-- Status message when VPN is timeout. -->
    <item>Timeout</item>
    <!-- Status message when VPN is failed. -->
    <item>Unsuccessful</item>
  </string-array>
  <!-- User content ratings for restricted users [CHAR LIMIT=30] -->
  <!-- Values for user content ratings for restricted users -->
  <!-- Values for premium SMS permission selector [CHAR LIMIT=30] -->
  <string-array name="security_settings_premium_sms_values">
    <!-- Ask user before sending to premium SMS short code. -->
    <item>Entrugar</item>
    <!-- Never allow app to send to premium SMS short code. -->
    <item>Nun permitir enxamás</item>
    <!-- Always allow app to send to premium SMS short code. -->
    <item>Permitir siempres</item>
  </string-array>
  <!-- [CHAR LIMIT=40] Labels for memory states -->
  <string-array name="ram_states">
    <!-- Normal desired memory state. -->
    <item>Normal</item>
    <!-- Moderate memory state, not as good as normal. -->
    <item>Moderate</item>
    <!-- Memory is running low. -->
    <item>Low</item>
    <!-- Memory is critical. -->
    <item>Critical</item>
    <!-- Unknown memory state -->
    <item>\?</item>
  </string-array>
  <!-- Display color space adjustment modes for accessibility -->
  <!-- Values for display color space adjustment modes for accessibility -->
  <!-- Display color space adjustment modes for developers -->
  <!-- Values for display color space adjustment modes for developers -->
  <!-- Battery saver mode: allowable trigger threshold levels. -->
  <!-- Process stats memory use details: labels for memory states -->
  <string-array name="proc_stats_memory_states">
    <item>Normal</item>
    <item>Moderate</item>
    <item>Low</item>
    <item>Critical</item>
  </string-array>
  <!-- Process stats memory use details: labels for process -->
  <!-- Array of titles for sim color for multi-sim -->
  <string-array name="color_picker">
    <item>Teal</item>
    <item>Azul</item>
    <item>Añil</item>
    <item>Moráu</item>
    <item>Rosa</item>
    <item>Bermeyu</item>
  </string-array>
  <!-- USB configuration names for Developer Settings.
         This can be overridden by devices with additional USB configurations. -->
  <string-array name="usb_configuration_titles">
    <item>@string/usb_use_charging_only</item>
    <item>MTP (Protocolu de tresferencia de medios)</item>
    <item>PTP (Protocolu de tresferencia de semeyes)</item>
    <item>RNDIS (Ethernet USB)</item>
    <item>Fonte d\'audiu</item>
    <item>MIDI</item>
  </string-array>
  <!-- USB configuration values for Developer Settings.
         These are lists of USB functions passed to the USB Manager to change USB configuraton.
         This can be overridden by devices with additional USB configurations.
         Do not translate. -->
  <!-- Possible values for user theme in Display Settings.
         Do not translate. -->
  <!-- These values should match up with the MODE_NIGHT constants in UiModeManager.
         Do not translate. -->
</resources>