/*
 * usb-host.c - OMAP USB Host
 *
 * This file will contain the board specific details for the
 * Synopsys EHCI/OHCI host controller on OMAP3430 and onwards
 *
 * Copyright (C) 2007-2011 Texas Instruments
 * Author: Vikram Pandita <vikram.pandita@ti.com>
 * Author: Keshava Munegowda <keshava_mgowda@ti.com>
 *
 * Generalization by:
 * Felipe Balbi <balbi@ti.com>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */

#include <linux/types.h>
#include <linux/errno.h>
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/dma-mapping.h>
#include <linux/usb.h>
#include <linux/usb/hcd.h>

#include <asm/io.h>

#include <mach/hardware.h>
#include <mach/irqs.h>
#include <plat/usb.h>
#include <plat/omap_device.h>

#include "control.h"
#include "mux.h"

#ifdef CONFIG_MFD_OMAP_USB_HOST

#define OMAP_USBHS_DEVICE	"usbhs_omap"
#define	USBHS_UHH_HWMODNAME	"usbhs_uhh"
#define	USBHS_OHCI_HWMODNAME	"usbhs_ohci"
#define USBHS_EHCI_HWMODNAME	"usbhs_ehci"
#define USBHS_TLL_HWMODNAME	"usbhs_tll"

static struct usbhs_omap_platform_data		usbhs_data;
static struct ehci_hcd_omap_platform_data	ehci_data;
static struct ohci_hcd_omap_platform_data	ohci_data;
static int usbhs_update_sar;

static struct omap_device_pm_latency omap_uhhtll_latency[] = {
	  {
		.deactivate_func = omap_device_idle_hwmods,
		.activate_func	 = omap_device_enable_hwmods,
		.flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
	  },
};

static struct usbhs_wakeup {
	struct device *dev;
	struct omap_hwmod *oh_ehci;
	struct omap_hwmod *oh_ohci;
	struct delayed_work wakeup_work;
} *usbhs_wake;

/* MUX settings for EHCI pins */
static struct omap_device_pad port1_phy_pads[] __initdata = {
	{
		.name = "usbb1_ulpitll_stp.usbb1_ulpiphy_stp",
		.enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE4,
	},
	{
		.name = "usbb1_ulpitll_clk.usbb1_ulpiphy_clk",
		.enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE4,
	},
	{
		.name = "usbb1_ulpitll_dir.usbb1_ulpiphy_dir",
		.enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE4,
	},
	{
		.name = "usbb1_ulpitll_nxt.usbb1_ulpiphy_nxt",
		.enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE4,
	},
	{
		.name = "usbb1_ulpitll_dat0.usbb1_ulpiphy_dat0",
		.enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE4,
	},
	{
		.name = "usbb1_ulpitll_dat1.usbb1_ulpiphy_dat1",
		.enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE4,
	},
	{
		.name = "usbb1_ulpitll_dat2.usbb1_ulpiphy_dat2",
		.enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE4,
	},
	{
		.name = "usbb1_ulpitll_dat3.usbb1_ulpiphy_dat3",
		.enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE4,
	},
	{
		.name = "usbb1_ulpitll_dat4.usbb1_ulpiphy_dat4",
		.enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE4,
	},
	{
		.name = "usbb1_ulpitll_dat5.usbb1_ulpiphy_dat5",
		.enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE4,
	},
	{
		.name = "usbb1_ulpitll_dat6.usbb1_ulpiphy_dat6",
		.enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE4,
	},
	{
		.name = "usbb1_ulpitll_dat7.usbb1_ulpiphy_dat7",
		.enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE4,
	},
};

static struct omap_device_pad port1_tll_pads[] __initdata = {
	{
		.name = "usbb1_ulpitll_stp.usbb1_ulpitll_stp",
		.enable = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
	},
	{
		.name = "usbb1_ulpitll_clk.usbb1_ulpitll_clk",
		.enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE0,
	},
	{
		.name = "usbb1_ulpitll_dir.usbb1_ulpitll_dir",
		.enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE0,
	},
	{
		.name = "usbb1_ulpitll_nxt.usbb1_ulpitll_nxt",
		.enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE0,
	},
	{
		.name = "usbb1_ulpitll_dat0.usbb1_ulpitll_dat0",
		.enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE0,
	},
	{
		.name = "usbb1_ulpitll_dat1.usbb1_ulpitll_dat1",
		.enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE0,
	},
	{
		.name = "usbb1_ulpitll_dat2.usbb1_ulpitll_dat2",
		.enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE0,
	},
	{
		.name = "usbb1_ulpitll_dat3.usbb1_ulpitll_dat3",
		.enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE0,
	},
	{
		.name = "usbb1_ulpitll_dat4.usbb1_ulpitll_dat4",
		.enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE0,
	},
	{
		.name = "usbb1_ulpitll_dat5.usbb1_ulpitll_dat5",
		.enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE0,
	},
	{
		.name = "usbb1_ulpitll_dat6.usbb1_ulpitll_dat6",
		.enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE0,
	},
	{
		.name = "usbb1_ulpitll_dat7.usbb1_ulpitll_dat7",
		.enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE0,
	},
};

static struct omap_device_pad port1_hsic_pads[] __initdata = {
	{
		.name = "usbb1_hsic_data.usbb1_hsic_data",
		.flags  = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP,
		.enable = (OMAP_PIN_OUTPUT | OMAP_MUX_MODE0) & ~(OMAP_WAKEUP_EN),
		.idle = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
	},
	{
		.name = "usbb1_hsic_strobe.usbb1_hsic_strobe",
		.flags  = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP,
		.enable = (OMAP_PIN_OUTPUT | OMAP_MUX_MODE0) & ~(OMAP_WAKEUP_EN),
		.idle = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
	},
};

static struct omap_device_pad port2_phy_pads[] __initdata = {
	{
		.name = "usbb2_ulpitll_stp.usbb2_ulpiphy_stp",
		.enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE4,
	},
	{
		.name = "usbb2_ulpitll_clk.usbb2_ulpiphy_clk",
		.enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE4,
	},
	{
		.name = "usbb2_ulpitll_dir.usbb2_ulpiphy_dir",
		.enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE4,
	},
	{
		.name = "usbb2_ulpitll_nxt.usbb2_ulpiphy_nxt",
		.enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE4,
	},
	{
		.name = "usbb2_ulpitll_dat0.usbb2_ulpiphy_dat0",
		.flags  = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP,
		.enable = (OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE4) & ~(OMAP_WAKEUP_EN),
		.idle	= OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE4,
	},
	{
		.name = "usbb2_ulpitll_dat1.usbb2_ulpiphy_dat1",
		.enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE4,
	},
	{
		.name = "usbb2_ulpitll_dat2.usbb2_ulpiphy_dat2",
		.enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE4,
	},
	{
		.name = "usbb2_ulpitll_dat3.usbb2_ulpiphy_dat3",
		.enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE4,
	},
	{
		.name = "usbb2_ulpitll_dat4.usbb2_ulpiphy_dat4",
		.enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE4,
	},
	{
		.name = "usbb2_ulpitll_dat5.usbb2_ulpiphy_dat5",
		.enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE4,
	},
	{
		.name = "usbb2_ulpitll_dat6.usbb2_ulpiphy_dat6",
		.enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE4,
	},
	{
		.name = "usbb2_ulpitll_dat7.usbb2_ulpiphy_dat7",
		.enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE4,
	},
};

static struct omap_device_pad port2_tll_pads[] __initdata = {
	{
		.name = "usbb2_ulpitll_stp.usbb2_ulpitll_stp",
		.enable = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
	},
	{
		.name = "usbb2_ulpitll_clk.usbb2_ulpitll_clk",
		.enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE0,
	},
	{
		.name = "usbb2_ulpitll_dir.usbb2_ulpitll_dir",
		.enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE0,
	},
	{
		.name = "usbb2_ulpitll_nxt.usbb2_ulpitll_nxt",
		.enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE0,
	},
	{
		.name = "usbb2_ulpitll_dat0.usbb2_ulpitll_dat0",
		.enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE0,
	},
	{
		.name = "usbb2_ulpitll_dat1.usbb2_ulpitll_dat1",
		.enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE0,
	},
	{
		.name = "usbb2_ulpitll_dat2.usbb2_ulpitll_dat2",
		.enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE0,
	},
	{
		.name = "usbb2_ulpitll_dat3.usbb2_ulpitll_dat3",
		.enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE0,
	},
	{
		.name = "usbb2_ulpitll_dat4.usbb2_ulpitll_dat4",
		.enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE0,
	},
	{
		.name = "usbb2_ulpitll_dat5.usbb2_ulpitll_dat5",
		.enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE0,
	},
	{
		.name = "usbb2_ulpitll_dat6.usbb2_ulpitll_dat6",
		.enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE0,
	},
	{
		.name = "usbb2_ulpitll_dat7.usbb2_ulpitll_dat7",
		.enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE0,
	},
};

static struct omap_device_pad port2_hsic_pads[] __initdata = {
	{
		.name = "usbb2_hsic_data.usbb2_hsic_data",
		.flags  = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP,
		.enable = (OMAP_PIN_OUTPUT | OMAP_MUX_MODE0) & ~(OMAP_WAKEUP_EN),
		.idle = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
	},
	{
		.name = "usbb2_hsic_strobe.usbb2_hsic_strobe",
		.flags  = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP,
		.enable = (OMAP_PIN_OUTPUT | OMAP_MUX_MODE0) & ~(OMAP_WAKEUP_EN),
		.idle = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
	},
};

static struct omap_device_pad port1_6pin_pads[] __initdata = {
	{
		.name = "usbb1_ulpitll_stp.usbb1_mm_rxdp",
		.flags  = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP,
		.enable = (OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE5) & ~(OMAP_WAKEUP_EN),
		.idle	= OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE5,
	},
	{
		.name = "usbb1_ulpitll_nxt.usbb1_mm_rxdm",
		.flags  = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP,
		.enable = (OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE5) & ~(OMAP_WAKEUP_EN),
		.idle	= OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE5,
	},
	{
		.name = "usbb1_ulpitll_dat0.usbb1_mm_rxrcv",
		.flags  = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP,
		.enable = (OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE5) & ~(OMAP_WAKEUP_EN),
		.idle	= OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE5,
	},
	{
		.name = "usbb1_ulpitll_dat3.usbb1_mm_txen",
		.flags  = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP,
		.enable = (OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE5) & ~(OMAP_WAKEUP_EN),
		.idle	= OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE5,
	},
	{
		.name = "usbb1_ulpitll_dat1.usbb1_mm_txdat",
		.flags  = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP,
		.enable = (OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE5) & ~(OMAP_WAKEUP_EN),
		.idle	= OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE5,
	},
	{
		.name = "usbb1_ulpitll_dat2.usbb1_mm_txse0",
		.flags  = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP,
		.enable = (OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE5) & ~(OMAP_WAKEUP_EN),
		.idle	= OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE5,
	},
};

static struct omap_device_pad port1_4pin_pads[] __initdata = {
	{
		.name = "usbb1_ulpitll_dat0.usbb1_mm_rxrcv",
		.enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE5,
	},
	{
		.name = "usbb1_ulpitll_dat3.usbb1_mm_txen",
		.enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE5,
	},
	{
		.name = "usbb1_ulpitll_dat1.usbb1_mm_txdat",
		.enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE5,
	},
	{
		.name = "usbb1_ulpitll_dat2.usbb1_mm_txse0",
		.enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE5,
	},
};

static struct omap_device_pad port1_3pin_pads[] __initdata = {
	{
		.name = "usbb1_ulpitll_dat3.usbb1_mm_txen",
		.enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE5,
	},
	{
		.name = "usbb1_ulpitll_dat1.usbb1_mm_txdat",
		.enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE5,
	},
	{
		.name = "usbb1_ulpitll_dat2.usbb1_mm_txse0",
		.enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE5,
	},
};

static struct omap_device_pad port1_2pin_pads[] __initdata = {
	{
		.name = "usbb1_ulpitll_dat1.usbb1_mm_txdat",
		.enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE5,
	},
	{
		.name = "usbb1_ulpitll_dat2.usbb1_mm_txse0",
		.enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE5,
	},
};

static struct omap_device_pad port2_6pin_pads[] __initdata = {
	{
		.name = "abe_mcbsp2_dr.usbb2_mm_rxdp",
		.flags  = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP,
		.enable = (OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE4) & ~(OMAP_WAKEUP_EN),
		.idle	= OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE4,
	},
	{
		.name = "abe_mcbsp2_clkx.usbb2_mm_rxdm",
		.flags  = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP,
		.enable = (OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE4) & ~(OMAP_WAKEUP_EN),
		.idle	= OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE4,
	},
	{
		.name = "abe_mcbsp2_dx.usbb2_mm_rxrcv",
		.flags  = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP,
		.enable = (OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE4) & ~(OMAP_WAKEUP_EN),
		.idle	= OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE4,
	},
	{
		.name = "abe_mcbsp2_fsx.usbb2_mm_txen",
		.flags  = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP,
		.enable = (OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE4) & ~(OMAP_WAKEUP_EN),
		.idle	= OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE4,
	},
	{
		.name = "abe_dmic_din1.usbb2_mm_txdat",
		.flags  = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP,
		.enable = (OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE4) & ~(OMAP_WAKEUP_EN),
		.idle	= OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE4,
	},
	{
		.name = "abe_dmic_clk1.usbb2_mm_txse0",
		.flags  = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP,
		.enable = (OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE4) & ~(OMAP_WAKEUP_EN),
		.idle	= OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE4,
	},
};

static struct omap_device_pad port2_4pin_pads[] __initdata = {
	{
		.name = "abe_mcbsp2_dx.usbb2_mm_rxrcv",
		.enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE4,
	},
	{
		.name = "abe_mcbsp2_fsx.usbb2_mm_txen",
		.enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE4,
	},
	{
		.name = "abe_dmic_din1.usbb2_mm_txdat",
		.enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE4,
	},
	{
		.name = "abe_dmic_clk1.usbb2_mm_txse0",
		.enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE4,
	},
};

static struct omap_device_pad port2_3pin_pads[] __initdata = {
	{
		.name = "abe_mcbsp2_fsx.usbb2_mm_txen",
		.enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE4,
	},
	{
		.name = "abe_dmic_din1.usbb2_mm_txdat",
		.enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE4,
	},
	{
		.name = "abe_dmic_clk1.usbb2_mm_txse0",
		.enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE4,
	},
};

static struct omap_device_pad port2_2pin_pads[] __initdata = {
	{
		.name = "abe_mcbsp2_fsx.usbb2_mm_txen",
		.enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE4,
	},
	{
		.name = "abe_dmic_din1.usbb2_mm_txdat",
		.enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE4,
	},
	{
		.name = "abe_dmic_clk1.usbb2_mm_txse0",
		.enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE4,
	},
};
/*
 * setup_ehci_io_mux - initialize IO pad mux for USBHOST
 */
static void setup_ehci_io_mux(const enum usbhs_omap_port_mode *port_mode)
{
	switch (port_mode[0]) {
	case OMAP_EHCI_PORT_MODE_PHY:
		omap_mux_init_signal("hsusb1_stp", OMAP_PIN_OUTPUT);
		omap_mux_init_signal("hsusb1_clk", OMAP_PIN_OUTPUT);
		omap_mux_init_signal("hsusb1_dir", OMAP_PIN_INPUT_PULLDOWN);
		omap_mux_init_signal("hsusb1_nxt", OMAP_PIN_INPUT_PULLDOWN);
		omap_mux_init_signal("hsusb1_data0", OMAP_PIN_INPUT_PULLDOWN);
		omap_mux_init_signal("hsusb1_data1", OMAP_PIN_INPUT_PULLDOWN);
		omap_mux_init_signal("hsusb1_data2", OMAP_PIN_INPUT_PULLDOWN);
		omap_mux_init_signal("hsusb1_data3", OMAP_PIN_INPUT_PULLDOWN);
		omap_mux_init_signal("hsusb1_data4", OMAP_PIN_INPUT_PULLDOWN);
		omap_mux_init_signal("hsusb1_data5", OMAP_PIN_INPUT_PULLDOWN);
		omap_mux_init_signal("hsusb1_data6", OMAP_PIN_INPUT_PULLDOWN);
		omap_mux_init_signal("hsusb1_data7", OMAP_PIN_INPUT_PULLDOWN);
		break;
	case OMAP_EHCI_PORT_MODE_TLL:
		omap_mux_init_signal("hsusb1_tll_stp",
			OMAP_PIN_INPUT_PULLUP);
		omap_mux_init_signal("hsusb1_tll_clk",
			OMAP_PIN_INPUT_PULLDOWN);
		omap_mux_init_signal("hsusb1_tll_dir",
			OMAP_PIN_INPUT_PULLDOWN);
		omap_mux_init_signal("hsusb1_tll_nxt",
			OMAP_PIN_INPUT_PULLDOWN);
		omap_mux_init_signal("hsusb1_tll_data0",
			OMAP_PIN_INPUT_PULLDOWN);
		omap_mux_init_signal("hsusb1_tll_data1",
			OMAP_PIN_INPUT_PULLDOWN);
		omap_mux_init_signal("hsusb1_tll_data2",
			OMAP_PIN_INPUT_PULLDOWN);
		omap_mux_init_signal("hsusb1_tll_data3",
			OMAP_PIN_INPUT_PULLDOWN);
		omap_mux_init_signal("hsusb1_tll_data4",
			OMAP_PIN_INPUT_PULLDOWN);
		omap_mux_init_signal("hsusb1_tll_data5",
			OMAP_PIN_INPUT_PULLDOWN);
		omap_mux_init_signal("hsusb1_tll_data6",
			OMAP_PIN_INPUT_PULLDOWN);
		omap_mux_init_signal("hsusb1_tll_data7",
			OMAP_PIN_INPUT_PULLDOWN);
		break;
	case OMAP_USBHS_PORT_MODE_UNUSED:
		/* FALLTHROUGH */
	default:
		break;
	}

	switch (port_mode[1]) {
	case OMAP_EHCI_PORT_MODE_PHY:
		omap_mux_init_signal("hsusb2_stp", OMAP_PIN_OUTPUT);
		omap_mux_init_signal("hsusb2_clk", OMAP_PIN_OUTPUT);
		omap_mux_init_signal("hsusb2_dir", OMAP_PIN_INPUT_PULLDOWN);
		omap_mux_init_signal("hsusb2_nxt", OMAP_PIN_INPUT_PULLDOWN);
		omap_mux_init_signal("hsusb2_data0",
			OMAP_PIN_INPUT_PULLDOWN);
		omap_mux_init_signal("hsusb2_data1",
			OMAP_PIN_INPUT_PULLDOWN);
		omap_mux_init_signal("hsusb2_data2",
			OMAP_PIN_INPUT_PULLDOWN);
		omap_mux_init_signal("hsusb2_data3",
			OMAP_PIN_INPUT_PULLDOWN);
		omap_mux_init_signal("hsusb2_data4",
			OMAP_PIN_INPUT_PULLDOWN);
		omap_mux_init_signal("hsusb2_data5",
			OMAP_PIN_INPUT_PULLDOWN);
		omap_mux_init_signal("hsusb2_data6",
			OMAP_PIN_INPUT_PULLDOWN);
		omap_mux_init_signal("hsusb2_data7",
			OMAP_PIN_INPUT_PULLDOWN);
		break;
	case OMAP_EHCI_PORT_MODE_TLL:
		omap_mux_init_signal("hsusb2_tll_stp",
			OMAP_PIN_INPUT_PULLUP);
		omap_mux_init_signal("hsusb2_tll_clk",
			OMAP_PIN_INPUT_PULLDOWN);
		omap_mux_init_signal("hsusb2_tll_dir",
			OMAP_PIN_INPUT_PULLDOWN);
		omap_mux_init_signal("hsusb2_tll_nxt",
			OMAP_PIN_INPUT_PULLDOWN);
		omap_mux_init_signal("hsusb2_tll_data0",
			OMAP_PIN_INPUT_PULLDOWN);
		omap_mux_init_signal("hsusb2_tll_data1",
			OMAP_PIN_INPUT_PULLDOWN);
		omap_mux_init_signal("hsusb2_tll_data2",
			OMAP_PIN_INPUT_PULLDOWN);
		omap_mux_init_signal("hsusb2_tll_data3",
			OMAP_PIN_INPUT_PULLDOWN);
		omap_mux_init_signal("hsusb2_tll_data4",
			OMAP_PIN_INPUT_PULLDOWN);
		omap_mux_init_signal("hsusb2_tll_data5",
			OMAP_PIN_INPUT_PULLDOWN);
		omap_mux_init_signal("hsusb2_tll_data6",
			OMAP_PIN_INPUT_PULLDOWN);
		omap_mux_init_signal("hsusb2_tll_data7",
			OMAP_PIN_INPUT_PULLDOWN);
		break;
	case OMAP_USBHS_PORT_MODE_UNUSED:
		/* FALLTHROUGH */
	default:
		break;
	}

	switch (port_mode[2]) {
	case OMAP_EHCI_PORT_MODE_PHY:
		printk(KERN_WARNING "Port3 can't be used in PHY mode\n");
		break;
	case OMAP_EHCI_PORT_MODE_TLL:
		omap_mux_init_signal("hsusb3_tll_stp",
			OMAP_PIN_INPUT_PULLUP);
		omap_mux_init_signal("hsusb3_tll_clk",
			OMAP_PIN_INPUT_PULLDOWN);
		omap_mux_init_signal("hsusb3_tll_dir",
			OMAP_PIN_INPUT_PULLDOWN);
		omap_mux_init_signal("hsusb3_tll_nxt",
			OMAP_PIN_INPUT_PULLDOWN);
		omap_mux_init_signal("hsusb3_tll_data0",
			OMAP_PIN_INPUT_PULLDOWN);
		omap_mux_init_signal("hsusb3_tll_data1",
			OMAP_PIN_INPUT_PULLDOWN);
		omap_mux_init_signal("hsusb3_tll_data2",
			OMAP_PIN_INPUT_PULLDOWN);
		omap_mux_init_signal("hsusb3_tll_data3",
			OMAP_PIN_INPUT_PULLDOWN);
		omap_mux_init_signal("hsusb3_tll_data4",
			OMAP_PIN_INPUT_PULLDOWN);
		omap_mux_init_signal("hsusb3_tll_data5",
			OMAP_PIN_INPUT_PULLDOWN);
		omap_mux_init_signal("hsusb3_tll_data6",
			OMAP_PIN_INPUT_PULLDOWN);
		omap_mux_init_signal("hsusb3_tll_data7",
			OMAP_PIN_INPUT_PULLDOWN);
		break;
	case OMAP_USBHS_PORT_MODE_UNUSED:
		/* FALLTHROUGH */
	default:
		break;
	}

	return;
}

static struct omap_hwmod_mux_info *
setup_4430ehci_io_mux(const enum usbhs_omap_port_mode *port_mode)
{
	struct omap_device_pad *pads = NULL;
	int pads_cnt = 0;
	u32 val = 0;

	switch (port_mode[0]) {
	case OMAP_EHCI_PORT_MODE_PHY:
		pads = port1_phy_pads;
		pads_cnt = ARRAY_SIZE(port1_phy_pads);
			break;
	case OMAP_EHCI_PORT_MODE_TLL:
		pads = port1_tll_pads;
		pads_cnt = ARRAY_SIZE(port1_tll_pads);

		/* Errata i687: set I/O drive strength to 1 */
		if (cpu_is_omap443x()) {
			val = omap4_ctrl_pad_readl(OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SMART2IO_PADCONF_2);
			val |= OMAP4_USBB1_DR0_DS_MASK;
			omap4_ctrl_pad_writel(val, OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SMART2IO_PADCONF_2);
		}
			break;
	case OMAP_EHCI_PORT_MODE_HSIC:
		/*
		 * HSIC pads have special register for setting up
		 * OFF mode / PU / PD settings
		 */
		val = omap4_ctrl_pad_readl(OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_USBB_HSIC);
		val &= ~OMAP4_USBB1_HSIC_DATA_OFFMODE_WD_ENABLE_MASK &
				~OMAP4_USBB1_HSIC_STROBE_OFFMODE_WD_ENABLE_MASK;
		val |= OMAP4_USBB1_HSIC_DATA_OFFMODE_WD_ENABLE_MASK |
				OMAP4_USBB1_HSIC_STROBE_OFFMODE_WD_ENABLE_MASK |
				(0x3 << OMAP4_USBB1_HSIC_DATA_OFFMODE_WD_SHIFT) |
				(0x3 << OMAP4_USBB1_HSIC_STROBE_OFFMODE_WD_SHIFT);
		omap4_ctrl_pad_writel(val, OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_USBB_HSIC);

		pads = port1_hsic_pads;
		pads_cnt = ARRAY_SIZE(port1_hsic_pads);
			break;
	case OMAP_USBHS_PORT_MODE_UNUSED:
	default:
			break;
	}
	switch (port_mode[1]) {
	case OMAP_EHCI_PORT_MODE_PHY:
		pads = port2_phy_pads;
		pads_cnt = ARRAY_SIZE(port2_phy_pads);
			break;
	case OMAP_EHCI_PORT_MODE_TLL:
		pads = port2_tll_pads;
		pads_cnt = ARRAY_SIZE(port2_tll_pads);

		/* Errata i687: set I/O drive strength to 1 */
		if (cpu_is_omap443x()) {
			val = omap4_ctrl_pad_readl(OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SMART2IO_PADCONF_2);
			val |= OMAP4_USBB2_DR0_DS_MASK;
			omap4_ctrl_pad_writel(val, OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SMART2IO_PADCONF_2);
		}
			break;
	case OMAP_EHCI_PORT_MODE_HSIC:
		/*
		 * HSIC pads have special register for setting up
		 * OFF mode / PU / PD settings
		 */
		val = omap4_ctrl_pad_readl(OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_USBB_HSIC);
		val &= ~OMAP4_USBB2_HSIC_DATA_OFFMODE_WD_ENABLE_MASK &
				~OMAP4_USBB2_HSIC_STROBE_OFFMODE_WD_ENABLE_MASK;
		val |= OMAP4_USBB2_HSIC_DATA_OFFMODE_WD_ENABLE_MASK |
				OMAP4_USBB2_HSIC_STROBE_OFFMODE_WD_ENABLE_MASK |
				(0x3 << OMAP4_USBB2_HSIC_DATA_OFFMODE_WD_SHIFT) |
				(0x3 << OMAP4_USBB2_HSIC_STROBE_OFFMODE_WD_SHIFT);
		omap4_ctrl_pad_writel(val, OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_USBB_HSIC);

		pads = port2_hsic_pads;
		pads_cnt = ARRAY_SIZE(port2_hsic_pads);
			break;
	case OMAP_USBHS_PORT_MODE_UNUSED:
	default:
			break;
	}

	return omap_hwmod_mux_init(pads, pads_cnt);
}

static void setup_ohci_io_mux(const enum usbhs_omap_port_mode *port_mode)
{
	switch (port_mode[0]) {
	case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
	case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
	case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
	case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
		omap_mux_init_signal("mm1_rxdp",
			OMAP_PIN_INPUT_PULLDOWN);
		omap_mux_init_signal("mm1_rxdm",
			OMAP_PIN_INPUT_PULLDOWN);
		/* FALLTHROUGH */
	case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
	case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
		omap_mux_init_signal("mm1_rxrcv",
			OMAP_PIN_INPUT_PULLDOWN);
		/* FALLTHROUGH */
	case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
	case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
		omap_mux_init_signal("mm1_txen_n", OMAP_PIN_OUTPUT);
		/* FALLTHROUGH */
	case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
	case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
		omap_mux_init_signal("mm1_txse0",
			OMAP_PIN_INPUT_PULLDOWN);
		omap_mux_init_signal("mm1_txdat",
			OMAP_PIN_INPUT_PULLDOWN);
		break;
	case OMAP_USBHS_PORT_MODE_UNUSED:
		/* FALLTHROUGH */
	default:
		break;
	}
	switch (port_mode[1]) {
	case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
	case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
	case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
	case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
		omap_mux_init_signal("mm2_rxdp",
			OMAP_PIN_INPUT_PULLDOWN);
		omap_mux_init_signal("mm2_rxdm",
			OMAP_PIN_INPUT_PULLDOWN);
		/* FALLTHROUGH */
	case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
	case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
		omap_mux_init_signal("mm2_rxrcv",
			OMAP_PIN_INPUT_PULLDOWN);
		/* FALLTHROUGH */
	case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
	case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
		omap_mux_init_signal("mm2_txen_n", OMAP_PIN_OUTPUT);
		/* FALLTHROUGH */
	case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
	case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
		omap_mux_init_signal("mm2_txse0",
			OMAP_PIN_INPUT_PULLDOWN);
		omap_mux_init_signal("mm2_txdat",
			OMAP_PIN_INPUT_PULLDOWN);
		break;
	case OMAP_USBHS_PORT_MODE_UNUSED:
		/* FALLTHROUGH */
	default:
		break;
	}
	switch (port_mode[2]) {
	case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
	case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
	case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
	case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
		omap_mux_init_signal("mm3_rxdp",
			OMAP_PIN_INPUT_PULLDOWN);
		omap_mux_init_signal("mm3_rxdm",
			OMAP_PIN_INPUT_PULLDOWN);
		/* FALLTHROUGH */
	case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
	case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
		omap_mux_init_signal("mm3_rxrcv",
			OMAP_PIN_INPUT_PULLDOWN);
		/* FALLTHROUGH */
	case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
	case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
		omap_mux_init_signal("mm3_txen_n", OMAP_PIN_OUTPUT);
		/* FALLTHROUGH */
	case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
	case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
		omap_mux_init_signal("mm3_txse0",
			OMAP_PIN_INPUT_PULLDOWN);
		omap_mux_init_signal("mm3_txdat",
			OMAP_PIN_INPUT_PULLDOWN);
		break;
	case OMAP_USBHS_PORT_MODE_UNUSED:
		/* FALLTHROUGH */
	default:
		break;
	}
}

static struct omap_hwmod_mux_info *
setup_4430ohci_io_mux(const enum usbhs_omap_port_mode *port_mode)
{
	struct omap_device_pad *pads = NULL;
	int pads_cnt = 0;

	switch (port_mode[0]) {
	case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
	case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
	case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
	case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
		pads = port1_6pin_pads;
		pads_cnt = ARRAY_SIZE(port1_6pin_pads);
		break;
	case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
	case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
		pads = port1_4pin_pads;
		pads_cnt = ARRAY_SIZE(port1_4pin_pads);
		break;
	case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
	case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
		pads = port1_3pin_pads;
		pads_cnt = ARRAY_SIZE(port1_3pin_pads);
		break;
	case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
	case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
		pads = port1_2pin_pads;
		pads_cnt = ARRAY_SIZE(port1_2pin_pads);
		break;
	case OMAP_USBHS_PORT_MODE_UNUSED:
	default:
		break;
	}

	switch (port_mode[1]) {
	case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
	case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
	case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
	case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
		pads = port2_6pin_pads;
		pads_cnt = ARRAY_SIZE(port2_6pin_pads);
		break;
	case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
	case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
		pads = port2_4pin_pads;
		pads_cnt = ARRAY_SIZE(port2_4pin_pads);
		break;
	case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
	case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
		pads = port2_3pin_pads;
		pads_cnt = ARRAY_SIZE(port2_3pin_pads);
		break;
	case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
	case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
		pads = port2_2pin_pads;
		pads_cnt = ARRAY_SIZE(port2_3pin_pads);
		break;
	case OMAP_USBHS_PORT_MODE_UNUSED:
	default:
		break;
	}

	return omap_hwmod_mux_init(pads, pads_cnt);
}

int omap4430_usbhs_update_sar(void)
{
	if (usbhs_update_sar) {
		usbhs_update_sar = 0;
		return 1;
	}

	return 0;
}

void usbhs_wakeup()
{
	int workq = 0;

	if (!usbhs_wake)
		return;

	if (test_bit(USB_OHCI_LOADED, &usb_hcds_loaded) &&
	    omap_hwmod_pad_get_wakeup_status(usbhs_wake->oh_ohci) == true) {
		omap_hwmod_disable_ioring_wakeup(usbhs_wake->oh_ohci);
		workq = 1;
	}

	if (test_bit(USB_EHCI_LOADED, &usb_hcds_loaded) &&
	    omap_hwmod_pad_get_wakeup_status(usbhs_wake->oh_ehci) == true) {
		omap_hwmod_disable_ioring_wakeup(usbhs_wake->oh_ehci);
		workq = 1;
	}

	if (workq) {
		int queued;
		queued = queue_delayed_work(pm_wq, &usbhs_wake->wakeup_work,
				msecs_to_jiffies(20));
		if (queued)
			pm_runtime_get(usbhs_wake->dev);
	}
}

static void usbhs_resume_work(struct work_struct *work)
{
	dev_dbg(usbhs_wake->dev, "USB IO PAD Wakeup event triggered\n");
	pm_runtime_put(usbhs_wake->dev);
}

void __init usbhs_init(const struct usbhs_omap_board_data *pdata)
{
	struct omap_hwmod	*oh[4];
	struct omap_device	*od;
	int			bus_id = -1;
	int			i;

	for (i = 0; i < OMAP3_HS_USB_PORTS; i++) {
		usbhs_data.port_mode[i] = pdata->port_mode[i];
		ohci_data.port_mode[i] = pdata->port_mode[i];
		ehci_data.port_mode[i] = pdata->port_mode[i];
		ehci_data.reset_gpio_port[i] = pdata->reset_gpio_port[i];
		ehci_data.regulator[i] = pdata->regulator[i];
		ehci_data.transceiver_clk[i] = pdata->transceiver_clk[i];
	}
	ehci_data.phy_reset = pdata->phy_reset;
	ohci_data.es2_compatibility = pdata->es2_compatibility;
	ehci_data.usbhs_update_sar = &usbhs_update_sar;
	ohci_data.usbhs_update_sar = &usbhs_update_sar;
	usbhs_data.ehci_data = &ehci_data;
	usbhs_data.ohci_data = &ohci_data;

	oh[0] = omap_hwmod_lookup(USBHS_UHH_HWMODNAME);
	if (!oh[0]) {
		pr_err("Could not look up %s\n", USBHS_UHH_HWMODNAME);
		return;
	}

	oh[1] = omap_hwmod_lookup(USBHS_OHCI_HWMODNAME);
	if (!oh[1]) {
		pr_err("Could not look up %s\n", USBHS_OHCI_HWMODNAME);
		return;
	}

	oh[2] = omap_hwmod_lookup(USBHS_EHCI_HWMODNAME);
	if (!oh[2]) {
		pr_err("Could not look up %s\n", USBHS_EHCI_HWMODNAME);
		return;
	}

	oh[3] = omap_hwmod_lookup(USBHS_TLL_HWMODNAME);
	if (!oh[3]) {
		pr_err("Could not look up %s\n", USBHS_TLL_HWMODNAME);
		return;
	}

	if (cpu_is_omap34xx()) {
		setup_ehci_io_mux(pdata->port_mode);
		setup_ohci_io_mux(pdata->port_mode);
	} else if (cpu_is_omap44xx()) {
		oh[2]->mux = setup_4430ehci_io_mux(pdata->port_mode);
		oh[1]->mux = setup_4430ohci_io_mux(pdata->port_mode);
	}

	od = omap_device_build_ss(OMAP_USBHS_DEVICE, bus_id, oh, 4,
				(void *)&usbhs_data, sizeof(usbhs_data),
				omap_uhhtll_latency,
				ARRAY_SIZE(omap_uhhtll_latency), false);

	if (IS_ERR(od)) {
		pr_err("Could not build hwmod devices %s, %s\n",
			USBHS_UHH_HWMODNAME, USBHS_TLL_HWMODNAME);
		return;
	}

	usbhs_wake = kzalloc(sizeof(*usbhs_wake), GFP_KERNEL);
	if (!usbhs_wake) {
		pr_err("Could not allocate usbhs_wake\n");
		return;
	}

	INIT_DELAYED_WORK(&usbhs_wake->wakeup_work, usbhs_resume_work);
	usbhs_wake->oh_ehci = oh[2];
	usbhs_wake->oh_ohci = oh[1];
	usbhs_wake->dev = &od->pdev.dev;
}

#else

void usbhs_wakeup()
{
}

void __init usbhs_init(const struct usbhs_omap_board_data *pdata)
{
}

#endif