/*
*--------------------------------------------------------
*
*
*	Melfas MCS7000 Series Download base v1.0 2010.04.05
*
*
*--------------------------------------------------------
*/
#ifndef __MELFAS_DOWNLOAD_PORTING_H_INCLUDED__
#define __MELFAS_DOWNLOAD_PORTING_H_INCLUDED__
/*
*============================================================
*
*	Porting order
*
*============================================================
*/
/*

1. melfas_download_porting.h
   - Check typedef	[melfas_download_porting.h]

   - Check download options	[melfas_download_porting.h]
   - Add Port control code ( CE, RESETB, I2C, ... )
	[melfas_download_porting.h]

   - Apply your delay function ( inside mcsdl_delaly() )
   [melfas_download.c]
   Modify delay parameter constant ( ex. MCSDL_DELAY_5MS )
   to make it fit to your delay function.

   - Rename 'uart_printf()' to your console print function for debugging.
   [melfas_download_porting.h]
   or, define uart_printf() as different function properly.

   - Check Watchdog timer, Interrupt factor

   - Including Melfas binary .c file

   - Basenad dealy function
      fill up mcsdl_delay()

   - Implement processing external Melfas binary .bin file.

*/
/*
*============================================================
*
*	Type define
*
*============================================================
*/

typedef char INT8;
typedef unsigned char UINT8;
/*typedef unsigned char		uint8_t;*/
typedef short INT16;
typedef unsigned short UINT16;
/*typedef unsigned short	uint16_t;*/
typedef int INT32;
typedef unsigned int UINT32;
typedef unsigned char BOOLEAN;

#ifndef TRUE
#define TRUE				(1==1)
#endif

#ifndef FALSE
#define FALSE				(1==0)
#endif

#ifndef NULL
#define NULL				0
#endif

#ifndef GPIO_TOUCH_I2C_SDA
#define GPIO_TOUCH_I2C_SDA GPIO_I2C0_SDA
#define GPIO_TOUCH_I2C_SCL GPIO_I2C0_SCL
#endif
/*
*============================================================
*
*	Porting Download Options
*
*============================================================
*/
/*For printing debug information. ( Please check 'printing function' )*/
#define MELFAS_ENABLE_DBG_PRINT		1
#define MELFAS_ENABLE_DBG_PROGRESS_PRINT	1

/*For delay function test. ( Disable after Porting is finished )*/
#define MELFAS_ENABLE_DELAY_TEST	0

/*
*============================================================
*
*	IO Control poting.
*
*	Fill 'Using signal' up only.
*	See MCSDL_USE_VDD_CONTROL,
*		MCSDL_USE_CE_CONTROL,
*
*============================================================
*/
/*
*----------------
* VDD
*----------------
*/
#if MCSDL_USE_VDD_CONTROL
#define MCSDL_VDD_SET_HIGH()	/*ts_data->power(1);*/\
				/*gpio_set_value(GPIO_TOUCH_EN, 1) */
#define MCSDL_VDD_SET_LOW()	/*ts_data->power(0);*/\
				/*gpio_set_value(GPIO_TOUCH_EN, 0) */
#else
#define MCSDL_VDD_SET_HIGH()	/*Nothing */
#define MCSDL_VDD_SET_LOW()	/*Nothing */
#endif
/*
*----------------
* CE
*----------------
*/
#if MCSDL_USE_CE_CONTROL
#define MCSDL_CE_SET_HIGH()	/*ts_data->power(1);*/\
				/*gpio_set_value(GPIO_TOUCH_EN, 1) */
#define MCSDL_CE_SET_LOW()	/*ts_data->power(0);*/\
				/*gpio_set_value(GPIO_TOUCH_EN, 0) */
#define MCSDL_CE_SET_OUTPUT()	gpio_tlmm_config(GPIO_CFG(TOUCH_EN, 0, GPIO_CFG_OUTPUT,\
				GPIO_CFG_NO_PULL, GPIO_CFG_16MA),GPIO_CFG_ENABLE)
#else
#define MCSDL_CE_SET_HIGH()	/*Nothing */
#define MCSDL_CE_SET_LOW()	/*Nothing */
#define MCSDL_CE_SET_OUTPUT()	/*Nothing */
#endif

/*
*----------------
* RESETB
*----------------
*/
#if MCSDL_USE_RESETB_CONTROL
#define MCSDL_RESETB_SET_HIGH()		gpio_set_value(GPIO_TSP_INT, 1)
#define MCSDL_RESETB_SET_LOW()		gpio_set_value(GPIO_TSP_INT, 0)
#define MCSDL_RESETB_SET_OUTPUT(n)	gpio_direction_output(GPIO_TSP_INT, n)
#define MCSDL_RESETB_SET_INPUT()	gpio_direction_input(GPIO_TSP_INT)
#else
#define MCSDL_RESETB_SET_HIGH()
#define MCSDL_RESETB_SET_LOW()
#define MCSDL_RESETB_SET_OUTPUT()
#define MCSDL_RESETB_SET_INPUT()
#endif

/*
*------------------
* I2C SCL & SDA
*------------------
*/
#define MCSDL_GPIO_SCL_SET_HIGH()	gpio_set_value(GPIO_TSP_SCL_18V, 1)
#define MCSDL_GPIO_SCL_SET_LOW()	gpio_set_value(GPIO_TSP_SCL_18V, 0)

#define MCSDL_GPIO_SDA_SET_HIGH()	gpio_set_value(GPIO_TSP_SDA_18V, 1)
#define MCSDL_GPIO_SDA_SET_LOW()	gpio_set_value(GPIO_TSP_SDA_18V, 0)

#define MCSDL_GPIO_SCL_SET_OUTPUT(n)	gpio_direction_output(GPIO_TSP_SCL_18V, n)
#define MCSDL_GPIO_SCL_SET_INPUT()	gpio_direction_input(GPIO_TSP_SCL_18V)

#define MCSDL_GPIO_SDA_SET_OUTPUT(n)	gpio_direction_output(GPIO_TSP_SDA_18V, n)
#define MCSDL_GPIO_SDA_SET_INPUT()	gpio_direction_input(GPIO_TSP_SDA_18V)

#define MCSDL_GPIO_SDA_IS_HIGH()   ((gpio_get_value(GPIO_TSP_SDA_18V) > 0) ? 1 : 0)
#define MCSDL_GPIO_SCL_IS_HIGH()   ((gpio_get_value(GPIO_TSP_SCL_18V) > 0) ? 1 : 0)

#define MCSDL_SET_GPIO_I2C()	/*Nothing */
#define MCSDL_SET_HW_I2C()	/*Nothing */

/*
*============================================================
*
*	Delay parameter setting
*
*	These are used on 'mcsdl_delay()'
*
*============================================================
*/

#define MCSDL_DELAY_1US		1
#define MCSDL_DELAY_3US		3
#define MCSDL_DELAY_7US		7
#define MCSDL_DELAY_10US	10
#define MCSDL_DELAY_20US	20
#define MCSDL_DELAY_40US        40

#define MCSDL_DELAY_100US	100
#define MCSDL_DELAY_150US	150
#define MCSDL_DELAY_300US	300

#define MCSDL_DELAY_25MS	25000
#define MCSDL_DELAY_30MS	30000
#define MCSDL_DELAY_40MS	40000
#define MCSDL_DELAY_60MS        60000

#define MCSDL_DELAY_100MS	100000
#define MCSDL_DELAY_500MS	500000
/*
*============================================================
*
*	Defence External Effect
*
*============================================================
*/
#if 0

#define MELFAS_DISABLE_BASEBAND_ISR()			____HERE!_____
#define MELFAS_DISABLE_WATCHDOG_TIMER_RESET()		____HERE!_____

#define MELFAS_ROLLBACK_BASEBAND_ISR()			____HERE!_____
#define MELFAS_ROLLBACK_WATCHDOG_TIMER_RESET()		____HERE!_____

#else

#define MELFAS_DISABLE_BASEBAND_ISR()	/*Nothing */
#define MELFAS_DISABLE_WATCHDOG_TIMER_RESET()	/*Nothing */

#define MELFAS_ROLLBACK_BASEBAND_ISR()	/*Nothing */
#define MELFAS_ROLLBACK_WATCHDOG_TIMER_RESET()	/*Nothing */

#endif

#endif