/* linux/arch/arm/mach-exynos/board-smdk5250-display.c
 *
 * Copyright (c) 2012 Samsung Electronics Co., Ltd.
 *		http://www.samsung.com
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
*/

#include <linux/gpio.h>
#include <linux/pwm_backlight.h>
#include <linux/fb.h>
#include <linux/delay.h>

#include <video/platform_lcd.h>
#include <video/s5p-dp.h>

#include <plat/cpu.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/fb.h>
#include <plat/fb-s5p.h>
#include <plat/fb-core.h>
#include <plat/regs-fb-v4.h>
#include <plat/dp.h>
#include <plat/pd.h>
#include <plat/backlight.h>

#include <mach/map.h>
#include <mach/dev.h>

#ifdef CONFIG_FB_MIPI_DSIM
#include <plat/dsim.h>
#include <plat/mipi_dsi.h>
#endif

#if defined(CONFIG_LCD_MIPI_S6E8AB0)
static void mipi_lcd_set_power(struct plat_lcd_data *pd,
				unsigned int power)
{
	if (samsung_rev() >= EXYNOS5250_REV_1_0) {
		if (!gpio_request(EXYNOS5_GPD1(5), "GPD1")) {
			s3c_gpio_cfgpin(EXYNOS5_GPD1(5), S3C_GPIO_SFN(1));
			gpio_direction_output(EXYNOS5_GPD1(5), 0);
			gpio_direction_output(EXYNOS5_GPD1(5), 1);
			gpio_free(EXYNOS5_GPD1(5));
		}
	}
	/* reset */
	gpio_request_one(EXYNOS5_GPX1(5), GPIOF_OUT_INIT_HIGH, "GPX1");

	msleep(20);
	if (power) {
		/* fire nRESET on power up */
		gpio_set_value(EXYNOS5_GPX1(5), 0);
		msleep(20);
		gpio_set_value(EXYNOS5_GPX1(5), 1);
		msleep(20);
		gpio_free(EXYNOS5_GPX1(5));
	} else {
		/* fire nRESET on power off */
		gpio_set_value(EXYNOS5_GPX1(5), 0);
		msleep(20);
		gpio_set_value(EXYNOS5_GPX1(5), 1);
		msleep(20);
		gpio_free(EXYNOS5_GPX1(5));
	}
	msleep(20);
	/* power */
	gpio_request_one(EXYNOS5_GPX3(0), GPIOF_OUT_INIT_LOW, "GPX3");
	if (power) {
		/* fire nRESET on power up */
		gpio_set_value(EXYNOS5_GPX3(0), 1);
		gpio_free(EXYNOS5_GPX3(0));
	} else {
		/* fire nRESET on power off */
		gpio_set_value(EXYNOS5_GPX3(0), 0);
		gpio_free(EXYNOS5_GPX3(0));
	}

#ifndef CONFIG_BACKLIGHT_PWM
	/* backlight */
	gpio_request_one(EXYNOS5_GPB2(0), GPIOF_OUT_INIT_LOW, "GPB2");
	if (power) {
		/* fire nRESET on power up */
		gpio_set_value(EXYNOS5_GPB2(0), 1);
		gpio_free(EXYNOS5_GPB2(0));
	} else {
		/* fire nRESET on power off */
		gpio_set_value(EXYNOS5_GPB2(0), 0);
		gpio_free(EXYNOS5_GPB2(0));
	}
#endif /* CONFIG_BACKLIGHT_PWM */
}

static struct plat_lcd_data smdk5250_mipi_lcd_data = {
	.set_power	= mipi_lcd_set_power,
};

static struct platform_device smdk5250_mipi_lcd = {
	.name			= "platform-lcd",
	.dev.platform_data	= &smdk5250_mipi_lcd_data,
};

static struct s3c_fb_pd_win smdk5250_fb_win0 = {
	.win_mode = {
		.left_margin	= 0x4,
		.right_margin	= 0x4,
		.upper_margin	= 4,
		.lower_margin	= 4,
		.hsync_len	= 4,
		.vsync_len	= 4,
		.xres		= 1280,
		.yres		= 800,
	},
	.virtual_x		= 1280,
	.virtual_y		= 840 * 2,
	.width			= 223,
	.height			= 125,
	.max_bpp		= 32,
	.default_bpp		= 24,
};

static struct s3c_fb_pd_win smdk5250_fb_win1 = {
	.win_mode = {
		.left_margin	= 0x2,
		.right_margin	= 0x4,
		.upper_margin	= 4,
		.lower_margin	= 4,
		.hsync_len	= 4,
		.vsync_len	= 4,
		.xres		= 1280,
		.yres		= 800,
	},
	.virtual_x		= 1280,
	.virtual_y		= 840 * 2,
	.width			= 223,
	.height			= 125,
	.max_bpp		= 32,
	.default_bpp		= 24,
};

static struct s3c_fb_pd_win smdk5250_fb_win2 = {
	.win_mode = {
		.left_margin	= 0x4,
		.right_margin	= 0x4,
		.upper_margin	= 4,
		.lower_margin	= 4,
		.hsync_len	= 4,
		.vsync_len	= 4,
		.xres		= 1280,
		.yres		= 800,
	},
	.virtual_x		= 1280,
	.virtual_y		= 800 * 2,
	.width			= 223,
	.height			= 125,
	.max_bpp		= 32,
	.default_bpp		= 24,
};
#elif defined(CONFIG_LCD_MIPI_TC358764)
static void mipi_lcd_set_power(struct plat_lcd_data *pd,
				unsigned int power)
{
	/* reset */
	gpio_request_one(EXYNOS5_GPX1(5), GPIOF_OUT_INIT_HIGH, "GPX1");

	msleep(20);
	if (power) {
		/* fire nRESET on power up */
		gpio_set_value(EXYNOS5_GPX1(5), 0);
		msleep(20);
		gpio_set_value(EXYNOS5_GPX1(5), 1);
		msleep(20);
		gpio_free(EXYNOS5_GPX1(5));
	} else {
		/* fire nRESET on power off */
		gpio_set_value(EXYNOS5_GPX1(5), 0);
		msleep(20);
		gpio_set_value(EXYNOS5_GPX1(5), 1);
		msleep(20);
		gpio_free(EXYNOS5_GPX1(5));
	}
	msleep(20);
	/* power */
	gpio_request_one(EXYNOS5_GPX3(0), GPIOF_OUT_INIT_LOW, "GPX3");
	if (power) {
		/* fire nRESET on power up */
		gpio_set_value(EXYNOS5_GPX3(0), 1);
		gpio_free(EXYNOS5_GPX3(0));
	} else {
		/* fire nRESET on power off */
		gpio_set_value(EXYNOS5_GPX3(0), 0);
		gpio_free(EXYNOS5_GPX3(0));
	}

#ifndef CONFIG_BACKLIGHT_PWM
	/* backlight */
	gpio_request_one(EXYNOS5_GPB2(0), GPIOF_OUT_INIT_LOW, "GPB2");
	if (power) {
		/* fire nRESET on power up */
		gpio_set_value(EXYNOS5_GPB2(0), 1);
		gpio_free(EXYNOS5_GPB2(0));
	} else {
		/* fire nRESET on power off */
		gpio_set_value(EXYNOS5_GPB2(0), 0);
		gpio_free(EXYNOS5_GPB2(0));
	}
#endif
}

static struct plat_lcd_data smdk5250_mipi_lcd_data = {
	.set_power	= mipi_lcd_set_power,
};

static struct platform_device smdk5250_mipi_lcd = {
	.name			= "platform-lcd",
	.dev.platform_data	= &smdk5250_mipi_lcd_data,
};

static struct s3c_fb_pd_win smdk5250_fb_win0 = {
	.win_mode = {
		.left_margin	= 4,
		.right_margin	= 4,
		.upper_margin	= 4,
		.lower_margin	= 4,
		.hsync_len	= 4,
		.vsync_len	= 4,
		.xres		= 1280,
		.yres		= 800,
	},
	.virtual_x		= 1280,
	.virtual_y		= 840 * 2,
	.width			= 223,
	.height			= 125,
	.max_bpp		= 32,
	.default_bpp		= 24,
};

static struct s3c_fb_pd_win smdk5250_fb_win1 = {
	.win_mode = {
		.left_margin	= 4,
		.right_margin	= 4,
		.upper_margin	= 4,
		.lower_margin	= 4,
		.hsync_len	= 4,
		.vsync_len	= 4,
		.xres		= 1280,
		.yres		= 800,
	},
	.virtual_x		= 1280,
	.virtual_y		= 840 * 2,
	.width			= 223,
	.height			= 125,
	.max_bpp		= 32,
	.default_bpp		= 24,
};

static struct s3c_fb_pd_win smdk5250_fb_win2 = {
	.win_mode = {
		.left_margin	= 4,
		.right_margin	= 4,
		.upper_margin	= 4,
		.lower_margin	= 4,
		.hsync_len	= 4,
		.vsync_len	= 4,
		.xres		= 1280,
		.yres		= 800,
	},
	.virtual_x		= 1280,
	.virtual_y		= 800 * 2,
	.width			= 223,
	.height			= 125,
	.max_bpp		= 32,
	.default_bpp		= 24,
};
#elif defined(CONFIG_S5P_DP)
static void dp_lcd_set_power(struct plat_lcd_data *pd,
				unsigned int power)
{
#ifndef CONFIG_BACKLIGHT_PWM
	/* LCD_PWM_IN_2.8V: LCD_B_PWM, GPB2_0 */
	gpio_request(EXYNOS5_GPB2(0), "GPB2");
#endif
	/* LCD_APS_EN_2.8V: GPD0_6 */
	gpio_request(EXYNOS5_GPD0(6), "GPD0");

	/* LCD_EN: GPD0_5 */
	gpio_request(EXYNOS5_GPD0(5), "GPD0");

	/* LCD_EN: GPD0_5 */
	gpio_direction_output(EXYNOS5_GPD0(5), power);
	msleep(20);

	/* LCD_APS_EN_2.8V: GPD0_6 */
	gpio_direction_output(EXYNOS5_GPD0(6), power);
	msleep(20);
#ifndef CONFIG_BACKLIGHT_PWM
	/* LCD_PWM_IN_2.8V: LCD_B_PWM, GPB2_0 */
	gpio_direction_output(EXYNOS5_GPB2(0), power);

	gpio_free(EXYNOS5_GPB2(0));
#endif
	gpio_free(EXYNOS5_GPD0(6));
	gpio_free(EXYNOS5_GPD0(5));
}

static struct plat_lcd_data smdk5250_dp_lcd_data = {
	.set_power	= dp_lcd_set_power,
};

static struct platform_device smdk5250_dp_lcd = {
	.name	= "platform-lcd",
	.dev	= {
		.parent		= &s5p_device_fimd1.dev,
		.platform_data	= &smdk5250_dp_lcd_data,
	},
};

static struct s3c_fb_pd_win smdk5250_fb_win0 = {
	.win_mode = {
		.left_margin	= 80,
		.right_margin	= 48,
		.upper_margin	= 37,
		.lower_margin	= 3,
		.hsync_len	= 32,
		.vsync_len	= 6,
		.xres		= 2560,
		.yres		= 1600,
	},
	.virtual_x		= 2560,
	.virtual_y		= 1640 * 2,
	.max_bpp		= 32,
	.default_bpp		= 24,
};

static struct s3c_fb_pd_win smdk5250_fb_win1 = {
	.win_mode = {
		.left_margin	= 80,
		.right_margin	= 48,
		.upper_margin	= 37,
		.lower_margin	= 3,
		.hsync_len	= 32,
		.vsync_len	= 6,
		.xres		= 2560,
		.yres		= 1600,
	},
	.virtual_x		= 2560,
	.virtual_y		= 1640 * 2,
	.max_bpp		= 32,
	.default_bpp		= 24,
};

static struct s3c_fb_pd_win smdk5250_fb_win2 = {
	.win_mode = {
		.left_margin	= 80,
		.right_margin	= 48,
		.upper_margin	= 37,
		.lower_margin	= 3,
		.hsync_len	= 32,
		.vsync_len	= 6,
		.xres		= 2560,
		.yres		= 1600,
	},
	.virtual_x		= 2560,
	.virtual_y		= 1600 * 2,
	.max_bpp		= 32,
	.default_bpp		= 24,
};
#endif

static void exynos_fimd_gpio_setup_24bpp(void)
{
	unsigned int reg = 0;

#if defined(CONFIG_S5P_DP)
	/* Set Hotplug detect for DP */
	gpio_request(EXYNOS5_GPX0(7), "GPX0");
	s3c_gpio_cfgpin(EXYNOS5_GPX0(7), S3C_GPIO_SFN(3));
#endif

	/*
	 * Set DISP1BLK_CFG register for Display path selection
	 *
	 * FIMD of DISP1_BLK Bypass selection : DISP1BLK_CFG[15]
	 * ---------------------
	 *  0 | MIE/MDNIE
	 *  1 | FIMD : selected
	 */
	reg = __raw_readl(S3C_VA_SYS + 0x0214);
	reg &= ~(1 << 15);	/* To save other reset values */
	reg |= (1 << 15);
	__raw_writel(reg, S3C_VA_SYS + 0x0214);

#if defined(CONFIG_S5P_DP)
	/* Reference clcok selection for DPTX_PHY: PAD_OSC_IN */
	reg = __raw_readl(S3C_VA_SYS + 0x04d4);
	reg &= ~(1 << 0);
	__raw_writel(reg, S3C_VA_SYS + 0x04d4);

	/* DPTX_PHY: XXTI */
	reg = __raw_readl(S3C_VA_SYS + 0x04d8);
	reg &= ~(1 << 3);
	__raw_writel(reg, S3C_VA_SYS + 0x04d8);
#endif
}

static struct s3c_fb_platdata smdk5250_lcd1_pdata __initdata = {
#if defined(CONFIG_LCD_MIPI_S6E8AB0) || defined(CONFIG_LCD_MIPI_TC358764) || \
	defined(CONFIG_S5P_DP)
	.win[0]		= &smdk5250_fb_win0,
	.win[1]		= &smdk5250_fb_win1,
	.win[2]		= &smdk5250_fb_win2,
#endif
	.default_win	= 2,
	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
#if defined(CONFIG_LCD_MIPI_S6E8AB0) || defined(CONFIG_LCD_MIPI_TC358764)
	.vidcon1	= VIDCON1_INV_VCLK,
#elif defined(CONFIG_S5P_DP)
	.vidcon1	= 0,
#endif
	.setup_gpio	= exynos_fimd_gpio_setup_24bpp,
};

#ifdef CONFIG_FB_MIPI_DSIM
#if defined(CONFIG_LCD_MIPI_S6E8AB0)
static struct mipi_dsim_config dsim_info = {
	.e_interface	= DSIM_VIDEO,
	.e_pixel_format	= DSIM_24BPP_888,
	/* main frame fifo auto flush at VSYNC pulse */
	.auto_flush	= false,
	.eot_disable	= false,
	.auto_vertical_cnt = true,
	.hse = false,
	.hfp = false,
	.hbp = false,
	.hsa = false,

	.e_no_data_lane	= DSIM_DATA_LANE_4,
	.e_byte_clk	= DSIM_PLL_OUT_DIV8,
	.e_burst_mode	= DSIM_BURST,

	.p = 2,
	.m = 57,
	.s = 1,

	/* D-PHY PLL stable time spec :min = 200usec ~ max 400usec */
	.pll_stable_time = 500,

	.esc_clk = 20 * 1000000,	/* escape clk : 10MHz */

	/* stop state holding counter after bta change count 0 ~ 0xfff */
	.stop_holding_cnt = 0x0fff,
	.bta_timeout = 0xff,		/* bta timeout 0 ~ 0xff */
	.rx_timeout = 0xffff,		/* lp rx timeout 0 ~ 0xffff */

	.dsim_ddi_pd = &s6e8ab0_mipi_lcd_driver,
};

static struct mipi_dsim_lcd_config dsim_lcd_info = {
	.rgb_timing.left_margin		= 0xa,
	.rgb_timing.right_margin	= 0xa,
	.rgb_timing.upper_margin	= 80,
	.rgb_timing.lower_margin	= 48,
	.rgb_timing.hsync_len		= 5,
	.rgb_timing.vsync_len		= 32,
	.cpu_timing.cs_setup		= 0,
	.cpu_timing.wr_setup		= 1,
	.cpu_timing.wr_act		= 0,
	.cpu_timing.wr_hold		= 0,
	.lcd_size.width			= 1280,
	.lcd_size.height		= 800,
};
#elif defined(CONFIG_LCD_MIPI_S6E63M0)
static struct mipi_dsim_config dsim_info = {
	.e_interface	= DSIM_VIDEO,
	.e_pixel_format	= DSIM_24BPP_888,
	/* main frame fifo auto flush at VSYNC pulse */
	.auto_flush	= false,
	.eot_disable	= false,
	.auto_vertical_cnt = true,
	.hse = false,
	.hfp = false,
	.hbp = false,
	.hsa = false,

	.e_no_data_lane = DSIM_DATA_LANE_2,
	.e_byte_clk = DSIM_PLL_OUT_DIV8,
	.e_burst_mode = DSIM_NON_BURST_SYNC_PULSE,

	.p = 3,
	.m = 90,
	.s = 1,

	/* D-PHY PLL stable time spec :min = 200usec ~ max 400usec */
	.pll_stable_time = 500,

	.esc_clk = 10 * 1000000,		/* escape clk : 10MHz */

	/* stop state holding counter after bta change count 0 ~ 0xfff */
	.stop_holding_cnt	= 0x0fff,
	.bta_timeout		= 0xff,		/* bta timeout 0 ~ 0xff */
	.rx_timeout		= 0xffff,	/* lp rx timeout 0 ~ 0xffff */

	.dsim_ddi_pd = &s6e63m0_mipi_lcd_driver,
};

static struct mipi_dsim_lcd_config dsim_lcd_info = {
	.rgb_timing.left_margin		= 0x16,
	.rgb_timing.right_margin	= 0x16,
	.rgb_timing.upper_margin	= 0x28,
	.rgb_timing.lower_margin	= 0x1,
	.rgb_timing.hsync_len		= 0x2,
	.rgb_timing.vsync_len		= 0x3,
	.cpu_timing.cs_setup		= 0,
	.cpu_timing.wr_setup		= 1,
	.cpu_timing.wr_act		= 0,
	.cpu_timing.wr_hold		= 0,
	.lcd_size.width			= 480,
	.lcd_size.height		= 800,
};
#elif defined(CONFIG_LCD_MIPI_TC358764)
static struct mipi_dsim_config dsim_info = {
	.e_interface	= DSIM_VIDEO,
	.e_pixel_format	= DSIM_24BPP_888,
	/* main frame fifo auto flush at VSYNC pulse */
	.auto_flush	= false,
	.eot_disable	= false,
	.auto_vertical_cnt = false,
	.hse = false,
	.hfp = false,
	.hbp = false,
	.hsa = false,

	.e_no_data_lane	= DSIM_DATA_LANE_4,
	.e_byte_clk	= DSIM_PLL_OUT_DIV8,
	.e_burst_mode	= DSIM_BURST,

	.p = 3,
	.m = 115,
	.s = 1,

	/* D-PHY PLL stable time spec :min = 200usec ~ max 400usec */
	.pll_stable_time = 500,

	.esc_clk = 0.4 * 1000000,		/* escape clk : 10MHz */

	/* stop state holding counter after bta change count 0 ~ 0xfff */
	.stop_holding_cnt	= 0x0f,
	.bta_timeout		= 0xff,		/* bta timeout 0 ~ 0xff */
	.rx_timeout		= 0xffff,	/* lp rx timeout 0 ~ 0xffff */

	.dsim_ddi_pd = &tc358764_mipi_lcd_driver,
};

static struct mipi_dsim_lcd_config dsim_lcd_info = {
	.rgb_timing.left_margin		= 0x4,
	.rgb_timing.right_margin	= 0x4,
	.rgb_timing.upper_margin	= 0x4,
	.rgb_timing.lower_margin	= 0x4,
	.rgb_timing.hsync_len		= 0x4,
	.rgb_timing.vsync_len		= 0x4,
	.cpu_timing.cs_setup		= 0,
	.cpu_timing.wr_setup		= 1,
	.cpu_timing.wr_act		= 0,
	.cpu_timing.wr_hold		= 0,
	.lcd_size.width			= 1280,
	.lcd_size.height		= 800,
};
#endif

static struct s5p_platform_mipi_dsim dsim_platform_data = {
	.clk_name		= "dsim0",
	.dsim_config		= &dsim_info,
	.dsim_lcd_config	= &dsim_lcd_info,

	.part_reset		= s5p_dsim_part_reset,
	.init_d_phy		= s5p_dsim_init_d_phy,
	.get_fb_frame_done	= NULL,
	.trigger		= NULL,

	/*
	 * the stable time of needing to write data on SFR
	 * when the mipi mode becomes LP mode.
	 */
	.delay_for_stabilization = 600,
};
#endif

#ifdef CONFIG_S5P_DP
static struct video_info smdk5250_dp_config = {
	.name			= "WQXGA(2560x1600) LCD, for SMDK TEST",

	.h_sync_polarity	= 0,
	.v_sync_polarity	= 0,
	.interlaced		= 0,

	.color_space		= COLOR_RGB,
	.dynamic_range		= VESA,
	.ycbcr_coeff		= COLOR_YCBCR601,
	.color_depth		= COLOR_8,

	.link_rate		= LINK_RATE_2_70GBPS,
	.lane_count		= LANE_COUNT4,
};

static void s5p_dp_backlight_on(void)
{
	/* LED_BACKLIGHT_RESET: GPX1_5 */
	gpio_request(EXYNOS5_GPX1(5), "GPX1");

	gpio_direction_output(EXYNOS5_GPX1(5), 1);
	msleep(20);

	gpio_free(EXYNOS5_GPX1(5));
}

static void s5p_dp_backlight_off(void)
{
	/* LED_BACKLIGHT_RESET: GPX1_5 */
	gpio_request(EXYNOS5_GPX1(5), "GPX1");

	gpio_direction_output(EXYNOS5_GPX1(5), 0);
	msleep(20);

	gpio_free(EXYNOS5_GPX1(5));
}

static struct s5p_dp_platdata smdk5250_dp_data __initdata = {
	.video_info	= &smdk5250_dp_config,
	.phy_init	= s5p_dp_phy_init,
	.phy_exit	= s5p_dp_phy_exit,
	.backlight_on	= s5p_dp_backlight_on,
	.backlight_off	= s5p_dp_backlight_off,
};
#endif

static struct platform_device *smdk5250_display_devices[] __initdata = {
#ifdef CONFIG_FB_MIPI_DSIM
	&smdk5250_mipi_lcd,
	&s5p_device_mipi_dsim,
#endif
	&s5p_device_fimd1,
#ifdef CONFIG_S5P_DP
	&s5p_device_dp,
	&smdk5250_dp_lcd,
#endif
};

/* LCD Backlight data */
static struct samsung_bl_gpio_info smdk5250_bl_gpio_info = {
	.no = EXYNOS5_GPB2(0),
	.func = S3C_GPIO_SFN(2),
};

static struct platform_pwm_backlight_data smdk5250_bl_data = {
	.pwm_id = 0,
	.pwm_period_ns = 30000,
};

void __init exynos5_smdk5250_display_init(void)
{
#ifdef CONFIG_FB_MIPI_DSIM
	s5p_dsim_set_platdata(&dsim_platform_data);
	s5p_device_mipi_dsim.dev.parent = &exynos5_device_pd[PD_DISP1].dev;
#endif
#ifdef CONFIG_S5P_DP
	s5p_dp_set_platdata(&smdk5250_dp_data);
	s5p_device_dp.dev.parent = &exynos5_device_pd[PD_DISP1].dev;
#endif

	s5p_device_fimd1.dev.parent = &exynos5_device_pd[PD_DISP1].dev;

	dev_set_name(&s5p_device_fimd1.dev, "s3cfb.1");
	clk_add_alias("lcd", "exynos5-fb.1", "lcd", &s5p_device_fimd1.dev);
	clk_add_alias("sclk_fimd", "exynos5-fb.1", "sclk_fimd",
			&s5p_device_fimd1.dev);
	s5p_fb_setname(1, "exynos5-fb");

	s5p_fimd1_set_platdata(&smdk5250_lcd1_pdata);

	samsung_bl_set(&smdk5250_bl_gpio_info, &smdk5250_bl_data);

	platform_add_devices(smdk5250_display_devices,
			ARRAY_SIZE(smdk5250_display_devices));

#ifdef CONFIG_S5P_DP
	exynos4_fimd_setup_clock(&s5p_device_fimd1.dev,
			"sclk_fimd", "mout_mpll_user", 267 * MHZ);
#else
	exynos4_fimd_setup_clock(&s5p_device_fimd1.dev,
			"sclk_fimd", "mout_mpll_user", 800 * MHZ);
#endif
}