From 68e6d7d60c0b35990cb8056e317ba97f0fe73047 Mon Sep 17 00:00:00 2001 From: Wolfgang Wiedmeyer Date: Sat, 21 Jan 2017 01:33:48 +0100 Subject: Backport mac80211 from 3.4 kernel The ath9k_htc driver depends on mac80211, but mac80211 can't be build. The reason is that net/wireless is almost completely backported from a 3.4 kernel. To follow suit, mac80211 is also backported from 3.4, more precisely from 3.4.113. This makes mac80211 build. Signed-off-by: Wolfgang Wiedmeyer --- net/mac80211/scan.c | 369 ++++++++++++++++++++++++++++------------------------ 1 file changed, 197 insertions(+), 172 deletions(-) (limited to 'net/mac80211/scan.c') diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c index 7c757410884..34b928062b3 100644 --- a/net/mac80211/scan.c +++ b/net/mac80211/scan.c @@ -13,10 +13,12 @@ */ #include +#include #include #include #include #include +#include #include #include "ieee80211_i.h" @@ -102,16 +104,35 @@ ieee80211_bss_info_update(struct ieee80211_local *local, cbss->free_priv = ieee80211_rx_bss_free; bss = (void *)cbss->priv; + if (elems->parse_error) { + if (beacon) + bss->corrupt_data |= IEEE80211_BSS_CORRUPT_BEACON; + else + bss->corrupt_data |= IEEE80211_BSS_CORRUPT_PROBE_RESP; + } else { + if (beacon) + bss->corrupt_data &= ~IEEE80211_BSS_CORRUPT_BEACON; + else + bss->corrupt_data &= ~IEEE80211_BSS_CORRUPT_PROBE_RESP; + } + /* save the ERP value so that it is available at association time */ - if (elems->erp_info && elems->erp_info_len >= 1) { + if (elems->erp_info && elems->erp_info_len >= 1 && + (!elems->parse_error || + !(bss->valid_data & IEEE80211_BSS_VALID_ERP))) { bss->erp_value = elems->erp_info[0]; - bss->has_erp_value = 1; + bss->has_erp_value = true; + if (!elems->parse_error) + bss->valid_data |= IEEE80211_BSS_VALID_ERP; } - if (elems->tim) { + if (elems->tim && (!elems->parse_error || + !(bss->valid_data & IEEE80211_BSS_VALID_DTIM))) { struct ieee80211_tim_ie *tim_ie = (struct ieee80211_tim_ie *)elems->tim; bss->dtim_period = tim_ie->dtim_period; + if (!elems->parse_error) + bss->valid_data |= IEEE80211_BSS_VALID_DTIM; } /* If the beacon had no TIM IE, or it was invalid, use 1 */ @@ -119,26 +140,38 @@ ieee80211_bss_info_update(struct ieee80211_local *local, bss->dtim_period = 1; /* replace old supported rates if we get new values */ - srlen = 0; - if (elems->supp_rates) { - clen = IEEE80211_MAX_SUPP_RATES; - if (clen > elems->supp_rates_len) - clen = elems->supp_rates_len; - memcpy(bss->supp_rates, elems->supp_rates, clen); - srlen += clen; - } - if (elems->ext_supp_rates) { - clen = IEEE80211_MAX_SUPP_RATES - srlen; - if (clen > elems->ext_supp_rates_len) - clen = elems->ext_supp_rates_len; - memcpy(bss->supp_rates + srlen, elems->ext_supp_rates, clen); - srlen += clen; + if (!elems->parse_error || + !(bss->valid_data & IEEE80211_BSS_VALID_RATES)) { + srlen = 0; + if (elems->supp_rates) { + clen = IEEE80211_MAX_SUPP_RATES; + if (clen > elems->supp_rates_len) + clen = elems->supp_rates_len; + memcpy(bss->supp_rates, elems->supp_rates, clen); + srlen += clen; + } + if (elems->ext_supp_rates) { + clen = IEEE80211_MAX_SUPP_RATES - srlen; + if (clen > elems->ext_supp_rates_len) + clen = elems->ext_supp_rates_len; + memcpy(bss->supp_rates + srlen, elems->ext_supp_rates, + clen); + srlen += clen; + } + if (srlen) { + bss->supp_rates_len = srlen; + if (!elems->parse_error) + bss->valid_data |= IEEE80211_BSS_VALID_RATES; + } } - if (srlen) - bss->supp_rates_len = srlen; - bss->wmm_used = elems->wmm_param || elems->wmm_info; - bss->uapsd_supported = is_uapsd_supported(elems); + if (!elems->parse_error || + !(bss->valid_data & IEEE80211_BSS_VALID_WMM)) { + bss->wmm_used = elems->wmm_param || elems->wmm_info; + bss->uapsd_supported = is_uapsd_supported(elems); + if (!elems->parse_error) + bss->valid_data |= IEEE80211_BSS_VALID_WMM; + } if (!beacon) bss->last_probe_resp = jiffies; @@ -175,7 +208,7 @@ ieee80211_scan_rx(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb) presp = ieee80211_is_probe_resp(fc); if (presp) { /* ignore ProbeResp to foreign address */ - if (memcmp(mgmt->da, sdata->vif.addr, ETH_ALEN)) + if (compare_ether_addr(mgmt->da, sdata->vif.addr)) return RX_DROP_MONITOR; presp = true; @@ -212,12 +245,7 @@ ieee80211_scan_rx(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb) if (bss) ieee80211_rx_bss_put(sdata->local, bss); - /* If we are on-operating-channel, and this packet is for the - * current channel, pass the pkt on up the stack so that - * the rest of the stack can make use of it. - */ - if (ieee80211_cfg_on_oper_channel(sdata->local) - && (channel == sdata->local->oper_channel)) + if (channel == sdata->local->oper_channel) return RX_CONTINUE; dev_kfree_skb(skb); @@ -231,6 +259,9 @@ static bool ieee80211_prep_hw_scan(struct ieee80211_local *local) enum ieee80211_band band; int i, ielen, n_chans; + if (test_bit(SCAN_HW_CANCELLED, &local->scanning)) + return false; + do { if (local->hw_scan_band == IEEE80211_NUM_BANDS) return false; @@ -251,9 +282,10 @@ static bool ieee80211_prep_hw_scan(struct ieee80211_local *local) local->hw_scan_req->n_channels = n_chans; ielen = ieee80211_build_preq_ies(local, (u8 *)local->hw_scan_req->ie, - req->ie, req->ie_len, band, (u32) -1, - 0); + req->ie, req->ie_len, band, + req->rates[band], 0); local->hw_scan_req->ie_len = ielen; + local->hw_scan_req->no_cck = req->no_cck; return true; } @@ -262,8 +294,6 @@ static void __ieee80211_scan_completed(struct ieee80211_hw *hw, bool aborted, bool was_hw_scan) { struct ieee80211_local *local = hw_to_local(hw); - bool on_oper_chan; - bool enable_beacons = false; lockdep_assert_held(&local->mtx); @@ -296,25 +326,13 @@ static void __ieee80211_scan_completed(struct ieee80211_hw *hw, bool aborted, local->scanning = 0; local->scan_channel = NULL; - on_oper_chan = ieee80211_cfg_on_oper_channel(local); - - if (was_hw_scan || !on_oper_chan) - ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL); - else - /* Set power back to normal operating levels. */ - ieee80211_hw_config(local, 0); + /* Set power back to normal operating levels. */ + ieee80211_hw_config(local, 0); if (!was_hw_scan) { - bool on_oper_chan2; ieee80211_configure_filter(local); drv_sw_scan_complete(local); - on_oper_chan2 = ieee80211_cfg_on_oper_channel(local); - /* We should always be on-channel at this point. */ - WARN_ON(!on_oper_chan2); - if (on_oper_chan2 && (on_oper_chan != on_oper_chan2)) - enable_beacons = true; - - ieee80211_offchannel_return(local, enable_beacons); + ieee80211_offchannel_return(local); } ieee80211_recalc_idle(local); @@ -355,15 +373,11 @@ static int ieee80211_start_sw_scan(struct ieee80211_local *local) */ drv_sw_scan_start(local); - local->leave_oper_channel_time = 0; + local->leave_oper_channel_time = jiffies; local->next_scan_state = SCAN_DECISION; local->scan_channel_idx = 0; - /* We always want to use off-channel PS, even if we - * are not really leaving oper-channel. Don't - * tell the AP though, as long as we are on-channel. - */ - ieee80211_offchannel_enable_all_ps(local, false); + ieee80211_offchannel_stop_vifs(local); ieee80211_configure_filter(local); @@ -371,8 +385,7 @@ static int ieee80211_start_sw_scan(struct ieee80211_local *local) ieee80211_hw_config(local, 0); ieee80211_queue_delayed_work(&local->hw, - &local->scan_work, - IEEE80211_CHANNEL_TIME); + &local->scan_work, 0); return 0; } @@ -508,96 +521,39 @@ static void ieee80211_scan_state_decision(struct ieee80211_local *local, next_chan = local->scan_req->channels[local->scan_channel_idx]; - if (ieee80211_cfg_on_oper_channel(local)) { - /* We're currently on operating channel. */ - if (next_chan == local->oper_channel) - /* We don't need to move off of operating channel. */ - local->next_scan_state = SCAN_SET_CHANNEL; - else - /* - * We do need to leave operating channel, as next - * scan is somewhere else. - */ - local->next_scan_state = SCAN_LEAVE_OPER_CHANNEL; - } else { - /* - * we're currently scanning a different channel, let's - * see if we can scan another channel without interfering - * with the current traffic situation. - * - * Since we don't know if the AP has pending frames for us - * we can only check for our tx queues and use the current - * pm_qos requirements for rx. Hence, if no tx traffic occurs - * at all we will scan as many channels in a row as the pm_qos - * latency allows us to. Additionally we also check for the - * currently negotiated listen interval to prevent losing - * frames unnecessarily. - * - * Otherwise switch back to the operating channel. - */ - - bad_latency = time_after(jiffies + - ieee80211_scan_get_channel_time(next_chan), - local->leave_oper_channel_time + - usecs_to_jiffies(pm_qos_request(PM_QOS_NETWORK_LATENCY))); - - listen_int_exceeded = time_after(jiffies + - ieee80211_scan_get_channel_time(next_chan), - local->leave_oper_channel_time + - usecs_to_jiffies(min_beacon_int * 1024) * - local->hw.conf.listen_interval); - - if (associated && ( !tx_empty || bad_latency || - listen_int_exceeded)) - local->next_scan_state = SCAN_ENTER_OPER_CHANNEL; - else - local->next_scan_state = SCAN_SET_CHANNEL; - } - - *next_delay = 0; -} - -static void ieee80211_scan_state_leave_oper_channel(struct ieee80211_local *local, - unsigned long *next_delay) -{ - /* PS will already be in off-channel mode, - * we do that once at the beginning of scanning. - */ - ieee80211_offchannel_stop_vifs(local); - /* - * What if the nullfunc frames didn't arrive? + * we're currently scanning a different channel, let's + * see if we can scan another channel without interfering + * with the current traffic situation. + * + * Since we don't know if the AP has pending frames for us + * we can only check for our tx queues and use the current + * pm_qos requirements for rx. Hence, if no tx traffic occurs + * at all we will scan as many channels in a row as the pm_qos + * latency allows us to. Additionally we also check for the + * currently negotiated listen interval to prevent losing + * frames unnecessarily. + * + * Otherwise switch back to the operating channel. */ - drv_flush(local, false); - if (local->ops->flush) - *next_delay = 0; - else - *next_delay = HZ / 10; - /* remember when we left the operating channel */ - local->leave_oper_channel_time = jiffies; + bad_latency = time_after(jiffies + + ieee80211_scan_get_channel_time(next_chan), + local->leave_oper_channel_time + + usecs_to_jiffies(pm_qos_request(PM_QOS_NETWORK_LATENCY))); - /* advance to the next channel to be scanned */ - local->next_scan_state = SCAN_SET_CHANNEL; -} + listen_int_exceeded = time_after(jiffies + + ieee80211_scan_get_channel_time(next_chan), + local->leave_oper_channel_time + + usecs_to_jiffies(min_beacon_int * 1024) * + local->hw.conf.listen_interval); -static void ieee80211_scan_state_enter_oper_channel(struct ieee80211_local *local, - unsigned long *next_delay) -{ - /* switch back to the operating channel */ - local->scan_channel = NULL; - if (!ieee80211_cfg_on_oper_channel(local)) - ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL); - - /* - * Re-enable vifs and beaconing. Leave PS - * in off-channel state..will put that back - * on-channel at the end of scanning. - */ - ieee80211_offchannel_return(local, true); + if (associated && (!tx_empty || bad_latency || listen_int_exceeded)) + local->next_scan_state = SCAN_SUSPEND; + else + local->next_scan_state = SCAN_SET_CHANNEL; - *next_delay = HZ / 5; - local->next_scan_state = SCAN_DECISION; + *next_delay = 0; } static void ieee80211_scan_state_set_channel(struct ieee80211_local *local, @@ -611,10 +567,8 @@ static void ieee80211_scan_state_set_channel(struct ieee80211_local *local, local->scan_channel = chan; - /* Only call hw-config if we really need to change channels. */ - if (chan != local->hw.conf.channel) - if (ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL)) - skip = 1; + if (ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL)) + skip = 1; /* advance state machine to next channel/band */ local->scan_channel_idx++; @@ -652,13 +606,16 @@ static void ieee80211_scan_state_send_probe(struct ieee80211_local *local, { int i; struct ieee80211_sub_if_data *sdata = local->scan_sdata; + enum ieee80211_band band = local->hw.conf.channel->band; for (i = 0; i < local->scan_req->n_ssids; i++) ieee80211_send_probe_req( sdata, NULL, local->scan_req->ssids[i].ssid, local->scan_req->ssids[i].ssid_len, - local->scan_req->ie, local->scan_req->ie_len); + local->scan_req->ie, local->scan_req->ie_len, + local->scan_req->rates[band], false, + local->scan_req->no_cck); /* * After sending probe requests, wait for probe responses @@ -668,6 +625,39 @@ static void ieee80211_scan_state_send_probe(struct ieee80211_local *local, local->next_scan_state = SCAN_DECISION; } +static void ieee80211_scan_state_suspend(struct ieee80211_local *local, + unsigned long *next_delay) +{ + /* switch back to the operating channel */ + local->scan_channel = NULL; + ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL); + + /* disable PS */ + ieee80211_offchannel_return(local); + + *next_delay = HZ / 5; + /* afterwards, resume scan & go to next channel */ + local->next_scan_state = SCAN_RESUME; +} + +static void ieee80211_scan_state_resume(struct ieee80211_local *local, + unsigned long *next_delay) +{ + ieee80211_offchannel_stop_vifs(local); + + if (local->ops->flush) { + drv_flush(local, false); + *next_delay = 0; + } else + *next_delay = HZ / 10; + + /* remember when we left the operating channel */ + local->leave_oper_channel_time = jiffies; + + /* advance to the next channel to be scanned */ + local->next_scan_state = SCAN_SET_CHANNEL; +} + void ieee80211_scan_work(struct work_struct *work) { struct ieee80211_local *local = @@ -738,11 +728,11 @@ void ieee80211_scan_work(struct work_struct *work) case SCAN_SEND_PROBE: ieee80211_scan_state_send_probe(local, &next_delay); break; - case SCAN_LEAVE_OPER_CHANNEL: - ieee80211_scan_state_leave_oper_channel(local, &next_delay); + case SCAN_SUSPEND: + ieee80211_scan_state_suspend(local, &next_delay); break; - case SCAN_ENTER_OPER_CHANNEL: - ieee80211_scan_state_enter_oper_channel(local, &next_delay); + case SCAN_RESUME: + ieee80211_scan_state_resume(local, &next_delay); break; } } while (next_delay == 0); @@ -769,9 +759,9 @@ int ieee80211_request_scan(struct ieee80211_sub_if_data *sdata, return res; } -int ieee80211_request_internal_scan(struct ieee80211_sub_if_data *sdata, - const u8 *ssid, u8 ssid_len, - struct ieee80211_channel *chan) +int ieee80211_request_ibss_scan(struct ieee80211_sub_if_data *sdata, + const u8 *ssid, u8 ssid_len, + struct ieee80211_channel *chan) { struct ieee80211_local *local = sdata->local; int ret = -EBUSY; @@ -785,22 +775,36 @@ int ieee80211_request_internal_scan(struct ieee80211_sub_if_data *sdata, /* fill internal scan request */ if (!chan) { - int i, nchan = 0; + int i, max_n; + int n_ch = 0; for (band = 0; band < IEEE80211_NUM_BANDS; band++) { if (!local->hw.wiphy->bands[band]) continue; - for (i = 0; - i < local->hw.wiphy->bands[band]->n_channels; - i++) { - local->int_scan_req->channels[nchan] = + + max_n = local->hw.wiphy->bands[band]->n_channels; + for (i = 0; i < max_n; i++) { + struct ieee80211_channel *tmp_ch = &local->hw.wiphy->bands[band]->channels[i]; - nchan++; + + if (tmp_ch->flags & (IEEE80211_CHAN_NO_IBSS | + IEEE80211_CHAN_DISABLED)) + continue; + + local->int_scan_req->channels[n_ch] = tmp_ch; + n_ch++; } } - local->int_scan_req->n_channels = nchan; + if (WARN_ON_ONCE(n_ch == 0)) + goto unlock; + + local->int_scan_req->n_channels = n_ch; } else { + if (WARN_ON_ONCE(chan->flags & (IEEE80211_CHAN_NO_IBSS | + IEEE80211_CHAN_DISABLED))) + goto unlock; + local->int_scan_req->channels[0] = chan; local->int_scan_req->n_channels = 1; } @@ -821,10 +825,8 @@ int ieee80211_request_internal_scan(struct ieee80211_sub_if_data *sdata, */ void ieee80211_scan_cancel(struct ieee80211_local *local) { - bool abortscan; - /* - * We are only canceling software scan, or deferred scan that was not + * We are canceling software scan, or deferred scan that was not * yet really started (see __ieee80211_start_scan ). * * Regarding hardware scan: @@ -836,23 +838,46 @@ void ieee80211_scan_cancel(struct ieee80211_local *local) * - we can not cancel scan_work since driver can schedule it * by ieee80211_scan_completed(..., true) to finish scan * - * Hence low lever driver is responsible for canceling HW scan. + * Hence we only call the cancel_hw_scan() callback, but the low-level + * driver is still responsible for calling ieee80211_scan_completed() + * after the scan was completed/aborted. */ mutex_lock(&local->mtx); - abortscan = local->scan_req && !test_bit(SCAN_HW_SCANNING, &local->scanning); - if (abortscan) { + if (!local->scan_req) + goto out; + + /* + * We have a scan running and the driver already reported completion, + * but the worker hasn't run yet or is stuck on the mutex - mark it as + * cancelled. + */ + if (test_bit(SCAN_HW_SCANNING, &local->scanning) && + test_bit(SCAN_COMPLETED, &local->scanning)) { + set_bit(SCAN_HW_CANCELLED, &local->scanning); + goto out; + } + + if (test_bit(SCAN_HW_SCANNING, &local->scanning)) { /* - * The scan is canceled, but stop work from being pending. - * - * If the work is currently running, it must be blocked on - * the mutex, but we'll set scan_sdata = NULL and it'll - * simply exit once it acquires the mutex. + * Make sure that __ieee80211_scan_completed doesn't trigger a + * scan on another band. */ - cancel_delayed_work(&local->scan_work); - /* and clean up */ - __ieee80211_scan_completed(&local->hw, true, false); + set_bit(SCAN_HW_CANCELLED, &local->scanning); + if (local->ops->cancel_hw_scan) + drv_cancel_hw_scan(local, local->scan_sdata); + goto out; } + + /* + * If the work is currently running, it must be blocked on + * the mutex, but we'll set scan_sdata = NULL and it'll + * simply exit once it acquires the mutex. + */ + cancel_delayed_work(&local->scan_work); + /* and clean up */ + __ieee80211_scan_completed(&local->hw, true, false); +out: mutex_unlock(&local->mtx); } -- cgit v1.2.3