From c55c63c6539499379ab4a7e8a5c0f857351fb946 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Fri, 7 Jan 2011 09:57:41 +1000 Subject: vt: fix issue when fbcon wants to takeover a second time. With framebuffer handover and multiple GPUs, we get into a position where the fbcon unbinds the vesafb framebuffer for GPU 1, but we still have a radeon framebuffer bound from GPU 0, so we don't unregister the console driver. Then when we tried to bind the new radeon framebuffer for GPU1 we never get to the bind call as we fail due to the console being registered already. This changes the return value to -EBUSY when the driver is already registered and continues to bind for -EBUSY. Signed-off-by: Dave Airlie Cc: Alan Cox Signed-off-by: Greg Kroah-Hartman --- drivers/tty/vt/vt.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c index 76407eca9ab..4f6ae05eb4f 100644 --- a/drivers/tty/vt/vt.c +++ b/drivers/tty/vt/vt.c @@ -3545,7 +3545,7 @@ int register_con_driver(const struct consw *csw, int first, int last) /* already registered */ if (con_driver->con == csw) - retval = -EINVAL; + retval = -EBUSY; } if (retval) @@ -3656,7 +3656,12 @@ int take_over_console(const struct consw *csw, int first, int last, int deflt) int err; err = register_con_driver(csw, first, last); - + /* if we get an busy error we still want to bind the console driver + * and return success, as we may have unbound the console driver +  * but not unregistered it. + */ + if (err == -EBUSY) + err = 0; if (!err) bind_con_driver(csw, first, last, deflt); -- cgit v1.2.3 From a2a6a822adc2a91c677cb60e9bc6ffe26fa90e9f Mon Sep 17 00:00:00 2001 From: Kay Sievers Date: Sun, 9 Jan 2011 16:39:14 +0100 Subject: tty: use for_each_console() and WARN() on sysfs failures This fixes the build warnings in the tty code, and uses the proper function for iterating over the console devices. Signed-off-by: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- drivers/tty/tty_io.c | 4 ++-- drivers/tty/vt/vt.c | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c index 464d09d9787..dae6fc96182 100644 --- a/drivers/tty/tty_io.c +++ b/drivers/tty/tty_io.c @@ -3257,7 +3257,7 @@ static ssize_t show_cons_active(struct device *dev, ssize_t count = 0; acquire_console_sem(); - for (c = console_drivers; c; c = c->next) { + for_each_console(c) { if (!c->device) continue; if (!c->write) @@ -3306,7 +3306,7 @@ int __init tty_init(void) if (IS_ERR(consdev)) consdev = NULL; else - device_create_file(consdev, &dev_attr_active); + WARN_ON(device_create_file(consdev, &dev_attr_active) < 0); #ifdef CONFIG_VT vty_init(&console_fops); diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c index 4f6ae05eb4f..955061863ed 100644 --- a/drivers/tty/vt/vt.c +++ b/drivers/tty/vt/vt.c @@ -2994,7 +2994,7 @@ int __init vty_init(const struct file_operations *console_fops) if (IS_ERR(tty0dev)) tty0dev = NULL; else - device_create_file(tty0dev, &dev_attr_active); + WARN_ON(device_create_file(tty0dev, &dev_attr_active) < 0); vcs_init(); -- cgit v1.2.3 From d0694e2aeb815042aa0f3e5036728b3db4446f1d Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Sun, 9 Jan 2011 08:38:48 +0100 Subject: serial: unbreak billionton CF card Unbreak Billionton CF bluetooth card. This actually fixes a regression on zaurus. Signed-off-by: Pavel Machek Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/8250.c b/drivers/tty/serial/8250.c index b25e6e49053..3975df6f7fd 100644 --- a/drivers/tty/serial/8250.c +++ b/drivers/tty/serial/8250.c @@ -236,7 +236,8 @@ static const struct serial8250_config uart_config[] = { .fifo_size = 128, .tx_loadsz = 128, .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, - .flags = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP, + /* UART_CAP_EFR breaks billionon CF bluetooth card. */ + .flags = UART_CAP_FIFO | UART_CAP_SLEEP, }, [PORT_16654] = { .name = "ST16654", -- cgit v1.2.3 From 1035b63d3c6fc34a9b8c4a181366eec6d6158b31 Mon Sep 17 00:00:00 2001 From: Paul Fulghum Date: Tue, 18 Jan 2011 14:03:25 -0800 Subject: n_hdlc: fix read and write locking Fix locking in read and write code of n_hdlc line discipline. 2.6.36 replaced lock_kernel() with tty_lock(). The tty mutex is not dropped automatically when the thread sleeps like the BKL. This results in a blocked read or write holding the tty mutex and stalling operations by other devices that use the tty mutex. A review of n_hdlc read and write code shows: 1. neither BKL or tty mutex are required for correct operation 2. read can block while read data is available if data is posted between availability check and call to interruptible_sleep_on() 3. write does not set process state to TASK_INTERRUPTIBLE on each pass through the processing loop which can cause unneeded scheduling of the thread The unnecessary tty mutex references have been removed. Read changed to use same code as n_tty read for completing reads and blocking. Write corrected to set process state to TASK_INTERRUPTIBLE on each pass through processing loop. Signed-off-by: Paul Fulghum Acked-by: Arnd Bergmann Cc: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- drivers/tty/n_hdlc.c | 90 ++++++++++++++++++++++++++-------------------------- 1 file changed, 45 insertions(+), 45 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/n_hdlc.c b/drivers/tty/n_hdlc.c index 47d32281032..52fc0c9a636 100644 --- a/drivers/tty/n_hdlc.c +++ b/drivers/tty/n_hdlc.c @@ -581,8 +581,9 @@ static ssize_t n_hdlc_tty_read(struct tty_struct *tty, struct file *file, __u8 __user *buf, size_t nr) { struct n_hdlc *n_hdlc = tty2n_hdlc(tty); - int ret; + int ret = 0; struct n_hdlc_buf *rbuf; + DECLARE_WAITQUEUE(wait, current); if (debuglevel >= DEBUG_LEVEL_INFO) printk("%s(%d)n_hdlc_tty_read() called\n",__FILE__,__LINE__); @@ -598,57 +599,55 @@ static ssize_t n_hdlc_tty_read(struct tty_struct *tty, struct file *file, return -EFAULT; } - tty_lock(); + add_wait_queue(&tty->read_wait, &wait); for (;;) { if (test_bit(TTY_OTHER_CLOSED, &tty->flags)) { - tty_unlock(); - return -EIO; + ret = -EIO; + break; } + if (tty_hung_up_p(file)) + break; - n_hdlc = tty2n_hdlc (tty); - if (!n_hdlc || n_hdlc->magic != HDLC_MAGIC || - tty != n_hdlc->tty) { - tty_unlock(); - return 0; - } + set_current_state(TASK_INTERRUPTIBLE); rbuf = n_hdlc_buf_get(&n_hdlc->rx_buf_list); - if (rbuf) + if (rbuf) { + if (rbuf->count > nr) { + /* too large for caller's buffer */ + ret = -EOVERFLOW; + } else { + if (copy_to_user(buf, rbuf->buf, rbuf->count)) + ret = -EFAULT; + else + ret = rbuf->count; + } + + if (n_hdlc->rx_free_buf_list.count > + DEFAULT_RX_BUF_COUNT) + kfree(rbuf); + else + n_hdlc_buf_put(&n_hdlc->rx_free_buf_list, rbuf); break; + } /* no data */ if (file->f_flags & O_NONBLOCK) { - tty_unlock(); - return -EAGAIN; + ret = -EAGAIN; + break; } - - interruptible_sleep_on (&tty->read_wait); + + schedule(); + if (signal_pending(current)) { - tty_unlock(); - return -EINTR; + ret = -EINTR; + break; } } - - if (rbuf->count > nr) - /* frame too large for caller's buffer (discard frame) */ - ret = -EOVERFLOW; - else { - /* Copy the data to the caller's buffer */ - if (copy_to_user(buf, rbuf->buf, rbuf->count)) - ret = -EFAULT; - else - ret = rbuf->count; - } - - /* return HDLC buffer to free list unless the free list */ - /* count has exceeded the default value, in which case the */ - /* buffer is freed back to the OS to conserve memory */ - if (n_hdlc->rx_free_buf_list.count > DEFAULT_RX_BUF_COUNT) - kfree(rbuf); - else - n_hdlc_buf_put(&n_hdlc->rx_free_buf_list,rbuf); - tty_unlock(); + + remove_wait_queue(&tty->read_wait, &wait); + __set_current_state(TASK_RUNNING); + return ret; } /* end of n_hdlc_tty_read() */ @@ -691,14 +690,15 @@ static ssize_t n_hdlc_tty_write(struct tty_struct *tty, struct file *file, count = maxframe; } - tty_lock(); - add_wait_queue(&tty->write_wait, &wait); - set_current_state(TASK_INTERRUPTIBLE); + + for (;;) { + set_current_state(TASK_INTERRUPTIBLE); - /* Allocate transmit buffer */ - /* sleep until transmit buffer available */ - while (!(tbuf = n_hdlc_buf_get(&n_hdlc->tx_free_buf_list))) { + tbuf = n_hdlc_buf_get(&n_hdlc->tx_free_buf_list); + if (tbuf) + break; + if (file->f_flags & O_NONBLOCK) { error = -EAGAIN; break; @@ -719,7 +719,7 @@ static ssize_t n_hdlc_tty_write(struct tty_struct *tty, struct file *file, } } - set_current_state(TASK_RUNNING); + __set_current_state(TASK_RUNNING); remove_wait_queue(&tty->write_wait, &wait); if (!error) { @@ -731,7 +731,7 @@ static ssize_t n_hdlc_tty_write(struct tty_struct *tty, struct file *file, n_hdlc_buf_put(&n_hdlc->tx_buf_list,tbuf); n_hdlc_send_frames(n_hdlc,tty); } - tty_unlock(); + return error; } /* end of n_hdlc_tty_write() */ -- cgit v1.2.3 From fed7bb324cffd980a4a576514ced3ff52f68f319 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 19 Jan 2011 14:34:35 -0800 Subject: tty/serial: fix apbuart build Fix build errors by selecting SERIAL_CORE: ERROR: "uart_register_driver" [drivers/tty/serial/apbuart.ko] undefined! ERROR: "uart_write_wakeup" [drivers/tty/serial/apbuart.ko] undefined! ERROR: "uart_update_timeout" [drivers/tty/serial/apbuart.ko] undefined! ERROR: "uart_get_divisor" [drivers/tty/serial/apbuart.ko] undefined! ERROR: "uart_get_baud_rate" [drivers/tty/serial/apbuart.ko] undefined! ERROR: "uart_add_one_port" [drivers/tty/serial/apbuart.ko] undefined! ERROR: "uart_unregister_driver" [drivers/tty/serial/apbuart.ko] undefined! ERROR: "uart_remove_one_port" [drivers/tty/serial/apbuart.ko] undefined! Signed-off-by: Randy Dunlap Cc: Daniel Hellstrom Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index b1682d7f1d8..2b8334601c8 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -1518,6 +1518,7 @@ config SERIAL_BCM63XX_CONSOLE config SERIAL_GRLIB_GAISLER_APBUART tristate "GRLIB APBUART serial support" depends on OF + select SERIAL_CORE ---help--- Add support for the GRLIB APBUART serial port. -- cgit v1.2.3 From ac751efa6a0d70f2c9daef5c7e3a92270f5c2dff Mon Sep 17 00:00:00 2001 From: Torben Hohn Date: Tue, 25 Jan 2011 15:07:35 -0800 Subject: console: rename acquire/release_console_sem() to console_lock/unlock() The -rt patches change the console_semaphore to console_mutex. As a result, a quite large chunk of the patches changes all acquire/release_console_sem() to acquire/release_console_mutex() This commit makes things use more neutral function names which dont make implications about the underlying lock. The only real change is the return value of console_trylock which is inverted from try_acquire_console_sem() This patch also paves the way to switching console_sem from a semaphore to a mutex. [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: make console_trylock return 1 on success, per Geert] Signed-off-by: Torben Hohn Cc: Thomas Gleixner Cc: Greg KH Cc: Ingo Molnar Cc: Geert Uytterhoeven Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/tty/serial/sb1250-duart.c | 2 +- drivers/tty/tty_io.c | 4 +- drivers/tty/vt/selection.c | 4 +- drivers/tty/vt/vc_screen.c | 16 ++--- drivers/tty/vt/vt.c | 124 +++++++++++++++++++------------------- drivers/tty/vt/vt_ioctl.c | 60 +++++++++--------- 6 files changed, 105 insertions(+), 105 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/sb1250-duart.c b/drivers/tty/serial/sb1250-duart.c index a2f2b325449..602d9845c52 100644 --- a/drivers/tty/serial/sb1250-duart.c +++ b/drivers/tty/serial/sb1250-duart.c @@ -829,7 +829,7 @@ static void __init sbd_probe_duarts(void) #ifdef CONFIG_SERIAL_SB1250_DUART_CONSOLE /* * Serial console stuff. Very basic, polling driver for doing serial - * console output. The console_sem is held by the caller, so we + * console output. The console_lock is held by the caller, so we * shouldn't be interrupted for more console activity. */ static void sbd_console_putchar(struct uart_port *uport, int ch) diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c index 464d09d9787..6158eae0f64 100644 --- a/drivers/tty/tty_io.c +++ b/drivers/tty/tty_io.c @@ -3256,7 +3256,7 @@ static ssize_t show_cons_active(struct device *dev, struct console *c; ssize_t count = 0; - acquire_console_sem(); + console_lock(); for (c = console_drivers; c; c = c->next) { if (!c->device) continue; @@ -3271,7 +3271,7 @@ static ssize_t show_cons_active(struct device *dev, while (i--) count += sprintf(buf + count, "%s%d%c", cs[i]->name, cs[i]->index, i ? ' ':'\n'); - release_console_sem(); + console_unlock(); return count; } diff --git a/drivers/tty/vt/selection.c b/drivers/tty/vt/selection.c index ebae344ce91..c956ed6c83a 100644 --- a/drivers/tty/vt/selection.c +++ b/drivers/tty/vt/selection.c @@ -316,9 +316,9 @@ int paste_selection(struct tty_struct *tty) /* always called with BTM from vt_ioctl */ WARN_ON(!tty_locked()); - acquire_console_sem(); + console_lock(); poke_blanked_console(); - release_console_sem(); + console_unlock(); ld = tty_ldisc_ref(tty); if (!ld) { diff --git a/drivers/tty/vt/vc_screen.c b/drivers/tty/vt/vc_screen.c index eab3a1ff99e..a672ed192d3 100644 --- a/drivers/tty/vt/vc_screen.c +++ b/drivers/tty/vt/vc_screen.c @@ -202,7 +202,7 @@ vcs_read(struct file *file, char __user *buf, size_t count, loff_t *ppos) /* Select the proper current console and verify * sanity of the situation under the console lock. */ - acquire_console_sem(); + console_lock(); attr = (currcons & 128); currcons = (currcons & 127); @@ -336,9 +336,9 @@ vcs_read(struct file *file, char __user *buf, size_t count, loff_t *ppos) * the pagefault handling code may want to call printk(). */ - release_console_sem(); + console_unlock(); ret = copy_to_user(buf, con_buf_start, orig_count); - acquire_console_sem(); + console_lock(); if (ret) { read += (orig_count - ret); @@ -354,7 +354,7 @@ vcs_read(struct file *file, char __user *buf, size_t count, loff_t *ppos) if (read) ret = read; unlock_out: - release_console_sem(); + console_unlock(); mutex_unlock(&con_buf_mtx); return ret; } @@ -379,7 +379,7 @@ vcs_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos) /* Select the proper current console and verify * sanity of the situation under the console lock. */ - acquire_console_sem(); + console_lock(); attr = (currcons & 128); currcons = (currcons & 127); @@ -414,9 +414,9 @@ vcs_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos) /* Temporarily drop the console lock so that we can read * in the write data from userspace safely. */ - release_console_sem(); + console_unlock(); ret = copy_from_user(con_buf, buf, this_round); - acquire_console_sem(); + console_lock(); if (ret) { this_round -= ret; @@ -542,7 +542,7 @@ vcs_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos) vcs_scr_updated(vc); unlock_out: - release_console_sem(); + console_unlock(); mutex_unlock(&con_buf_mtx); diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c index 76407eca9ab..b230bd3f056 100644 --- a/drivers/tty/vt/vt.c +++ b/drivers/tty/vt/vt.c @@ -1003,9 +1003,9 @@ static int vt_resize(struct tty_struct *tty, struct winsize *ws) struct vc_data *vc = tty->driver_data; int ret; - acquire_console_sem(); + console_lock(); ret = vc_do_resize(tty, vc, ws->ws_col, ws->ws_row); - release_console_sem(); + console_unlock(); return ret; } @@ -1271,7 +1271,7 @@ static void default_attr(struct vc_data *vc) vc->vc_color = vc->vc_def_color; } -/* console_sem is held */ +/* console_lock is held */ static void csi_m(struct vc_data *vc) { int i; @@ -1415,7 +1415,7 @@ int mouse_reporting(void) return vc_cons[fg_console].d->vc_report_mouse; } -/* console_sem is held */ +/* console_lock is held */ static void set_mode(struct vc_data *vc, int on_off) { int i; @@ -1485,7 +1485,7 @@ static void set_mode(struct vc_data *vc, int on_off) } } -/* console_sem is held */ +/* console_lock is held */ static void setterm_command(struct vc_data *vc) { switch(vc->vc_par[0]) { @@ -1545,7 +1545,7 @@ static void setterm_command(struct vc_data *vc) } } -/* console_sem is held */ +/* console_lock is held */ static void csi_at(struct vc_data *vc, unsigned int nr) { if (nr > vc->vc_cols - vc->vc_x) @@ -1555,7 +1555,7 @@ static void csi_at(struct vc_data *vc, unsigned int nr) insert_char(vc, nr); } -/* console_sem is held */ +/* console_lock is held */ static void csi_L(struct vc_data *vc, unsigned int nr) { if (nr > vc->vc_rows - vc->vc_y) @@ -1566,7 +1566,7 @@ static void csi_L(struct vc_data *vc, unsigned int nr) vc->vc_need_wrap = 0; } -/* console_sem is held */ +/* console_lock is held */ static void csi_P(struct vc_data *vc, unsigned int nr) { if (nr > vc->vc_cols - vc->vc_x) @@ -1576,7 +1576,7 @@ static void csi_P(struct vc_data *vc, unsigned int nr) delete_char(vc, nr); } -/* console_sem is held */ +/* console_lock is held */ static void csi_M(struct vc_data *vc, unsigned int nr) { if (nr > vc->vc_rows - vc->vc_y) @@ -1587,7 +1587,7 @@ static void csi_M(struct vc_data *vc, unsigned int nr) vc->vc_need_wrap = 0; } -/* console_sem is held (except via vc_init->reset_terminal */ +/* console_lock is held (except via vc_init->reset_terminal */ static void save_cur(struct vc_data *vc) { vc->vc_saved_x = vc->vc_x; @@ -1603,7 +1603,7 @@ static void save_cur(struct vc_data *vc) vc->vc_saved_G1 = vc->vc_G1_charset; } -/* console_sem is held */ +/* console_lock is held */ static void restore_cur(struct vc_data *vc) { gotoxy(vc, vc->vc_saved_x, vc->vc_saved_y); @@ -1625,7 +1625,7 @@ enum { ESnormal, ESesc, ESsquare, ESgetpars, ESgotpars, ESfunckey, EShash, ESsetG0, ESsetG1, ESpercent, ESignore, ESnonstd, ESpalette }; -/* console_sem is held (except via vc_init()) */ +/* console_lock is held (except via vc_init()) */ static void reset_terminal(struct vc_data *vc, int do_clear) { vc->vc_top = 0; @@ -1685,7 +1685,7 @@ static void reset_terminal(struct vc_data *vc, int do_clear) csi_J(vc, 2); } -/* console_sem is held */ +/* console_lock is held */ static void do_con_trol(struct tty_struct *tty, struct vc_data *vc, int c) { /* @@ -2119,7 +2119,7 @@ static int is_double_width(uint32_t ucs) return bisearch(ucs, double_width, ARRAY_SIZE(double_width) - 1); } -/* acquires console_sem */ +/* acquires console_lock */ static int do_con_write(struct tty_struct *tty, const unsigned char *buf, int count) { #ifdef VT_BUF_VRAM_ONLY @@ -2147,11 +2147,11 @@ static int do_con_write(struct tty_struct *tty, const unsigned char *buf, int co might_sleep(); - acquire_console_sem(); + console_lock(); vc = tty->driver_data; if (vc == NULL) { printk(KERN_ERR "vt: argh, driver_data is NULL !\n"); - release_console_sem(); + console_unlock(); return 0; } @@ -2159,7 +2159,7 @@ static int do_con_write(struct tty_struct *tty, const unsigned char *buf, int co if (!vc_cons_allocated(currcons)) { /* could this happen? */ printk_once("con_write: tty %d not allocated\n", currcons+1); - release_console_sem(); + console_unlock(); return 0; } @@ -2375,7 +2375,7 @@ rescan_last_byte: } FLUSH console_conditional_schedule(); - release_console_sem(); + console_unlock(); notify_update(vc); return n; #undef FLUSH @@ -2388,11 +2388,11 @@ rescan_last_byte: * us to do the switches asynchronously (needed when we want * to switch due to a keyboard interrupt). Synchronization * with other console code and prevention of re-entrancy is - * ensured with console_sem. + * ensured with console_lock. */ static void console_callback(struct work_struct *ignored) { - acquire_console_sem(); + console_lock(); if (want_console >= 0) { if (want_console != fg_console && @@ -2422,7 +2422,7 @@ static void console_callback(struct work_struct *ignored) } notify_update(vc_cons[fg_console].d); - release_console_sem(); + console_unlock(); } int set_console(int nr) @@ -2603,7 +2603,7 @@ static struct console vt_console_driver = { */ /* - * Generally a bit racy with respect to console_sem(). + * Generally a bit racy with respect to console_lock();. * * There are some functions which don't need it. * @@ -2629,17 +2629,17 @@ int tioclinux(struct tty_struct *tty, unsigned long arg) switch (type) { case TIOCL_SETSEL: - acquire_console_sem(); + console_lock(); ret = set_selection((struct tiocl_selection __user *)(p+1), tty); - release_console_sem(); + console_unlock(); break; case TIOCL_PASTESEL: ret = paste_selection(tty); break; case TIOCL_UNBLANKSCREEN: - acquire_console_sem(); + console_lock(); unblank_screen(); - release_console_sem(); + console_unlock(); break; case TIOCL_SELLOADLUT: ret = sel_loadlut(p); @@ -2688,10 +2688,10 @@ int tioclinux(struct tty_struct *tty, unsigned long arg) } break; case TIOCL_BLANKSCREEN: /* until explicitly unblanked, not only poked */ - acquire_console_sem(); + console_lock(); ignore_poke = 1; do_blank_screen(0); - release_console_sem(); + console_unlock(); break; case TIOCL_BLANKEDSCREEN: ret = console_blanked; @@ -2790,11 +2790,11 @@ static void con_flush_chars(struct tty_struct *tty) return; /* if we race with con_close(), vt may be null */ - acquire_console_sem(); + console_lock(); vc = tty->driver_data; if (vc) set_cursor(vc); - release_console_sem(); + console_unlock(); } /* @@ -2805,7 +2805,7 @@ static int con_open(struct tty_struct *tty, struct file *filp) unsigned int currcons = tty->index; int ret = 0; - acquire_console_sem(); + console_lock(); if (tty->driver_data == NULL) { ret = vc_allocate(currcons); if (ret == 0) { @@ -2813,7 +2813,7 @@ static int con_open(struct tty_struct *tty, struct file *filp) /* Still being freed */ if (vc->port.tty) { - release_console_sem(); + console_unlock(); return -ERESTARTSYS; } tty->driver_data = vc; @@ -2827,11 +2827,11 @@ static int con_open(struct tty_struct *tty, struct file *filp) tty->termios->c_iflag |= IUTF8; else tty->termios->c_iflag &= ~IUTF8; - release_console_sem(); + console_unlock(); return ret; } } - release_console_sem(); + console_unlock(); return ret; } @@ -2844,9 +2844,9 @@ static void con_shutdown(struct tty_struct *tty) { struct vc_data *vc = tty->driver_data; BUG_ON(vc == NULL); - acquire_console_sem(); + console_lock(); vc->port.tty = NULL; - release_console_sem(); + console_unlock(); tty_shutdown(tty); } @@ -2893,13 +2893,13 @@ static int __init con_init(void) struct vc_data *vc; unsigned int currcons = 0, i; - acquire_console_sem(); + console_lock(); if (conswitchp) display_desc = conswitchp->con_startup(); if (!display_desc) { fg_console = 0; - release_console_sem(); + console_unlock(); return 0; } @@ -2946,7 +2946,7 @@ static int __init con_init(void) printable = 1; printk("\n"); - release_console_sem(); + console_unlock(); #ifdef CONFIG_VT_CONSOLE register_console(&vt_console_driver); @@ -3037,7 +3037,7 @@ static int bind_con_driver(const struct consw *csw, int first, int last, if (!try_module_get(owner)) return -ENODEV; - acquire_console_sem(); + console_lock(); /* check if driver is registered */ for (i = 0; i < MAX_NR_CON_DRIVER; i++) { @@ -3122,7 +3122,7 @@ static int bind_con_driver(const struct consw *csw, int first, int last, retval = 0; err: - release_console_sem(); + console_unlock(); module_put(owner); return retval; }; @@ -3171,7 +3171,7 @@ int unbind_con_driver(const struct consw *csw, int first, int last, int deflt) if (!try_module_get(owner)) return -ENODEV; - acquire_console_sem(); + console_lock(); /* check if driver is registered and if it is unbindable */ for (i = 0; i < MAX_NR_CON_DRIVER; i++) { @@ -3185,7 +3185,7 @@ int unbind_con_driver(const struct consw *csw, int first, int last, int deflt) } if (retval) { - release_console_sem(); + console_unlock(); goto err; } @@ -3204,12 +3204,12 @@ int unbind_con_driver(const struct consw *csw, int first, int last, int deflt) } if (retval) { - release_console_sem(); + console_unlock(); goto err; } if (!con_is_bound(csw)) { - release_console_sem(); + console_unlock(); goto err; } @@ -3238,7 +3238,7 @@ int unbind_con_driver(const struct consw *csw, int first, int last, int deflt) if (!con_is_bound(csw)) con_driver->flag &= ~CON_DRIVER_FLAG_INIT; - release_console_sem(); + console_unlock(); /* ignore return value, binding should not fail */ bind_con_driver(defcsw, first, last, deflt); err: @@ -3538,7 +3538,7 @@ int register_con_driver(const struct consw *csw, int first, int last) if (!try_module_get(owner)) return -ENODEV; - acquire_console_sem(); + console_lock(); for (i = 0; i < MAX_NR_CON_DRIVER; i++) { con_driver = ®istered_con_driver[i]; @@ -3592,7 +3592,7 @@ int register_con_driver(const struct consw *csw, int first, int last) } err: - release_console_sem(); + console_unlock(); module_put(owner); return retval; } @@ -3613,7 +3613,7 @@ int unregister_con_driver(const struct consw *csw) { int i, retval = -ENODEV; - acquire_console_sem(); + console_lock(); /* cannot unregister a bound driver */ if (con_is_bound(csw)) @@ -3639,7 +3639,7 @@ int unregister_con_driver(const struct consw *csw) } } err: - release_console_sem(); + console_unlock(); return retval; } EXPORT_SYMBOL(unregister_con_driver); @@ -3934,9 +3934,9 @@ int con_set_cmap(unsigned char __user *arg) { int rc; - acquire_console_sem(); + console_lock(); rc = set_get_cmap (arg,1); - release_console_sem(); + console_unlock(); return rc; } @@ -3945,9 +3945,9 @@ int con_get_cmap(unsigned char __user *arg) { int rc; - acquire_console_sem(); + console_lock(); rc = set_get_cmap (arg,0); - release_console_sem(); + console_unlock(); return rc; } @@ -3994,12 +3994,12 @@ static int con_font_get(struct vc_data *vc, struct console_font_op *op) } else font.data = NULL; - acquire_console_sem(); + console_lock(); if (vc->vc_sw->con_font_get) rc = vc->vc_sw->con_font_get(vc, &font); else rc = -ENOSYS; - release_console_sem(); + console_unlock(); if (rc) goto out; @@ -4076,12 +4076,12 @@ static int con_font_set(struct vc_data *vc, struct console_font_op *op) font.data = memdup_user(op->data, size); if (IS_ERR(font.data)) return PTR_ERR(font.data); - acquire_console_sem(); + console_lock(); if (vc->vc_sw->con_font_set) rc = vc->vc_sw->con_font_set(vc, &font, op->flags); else rc = -ENOSYS; - release_console_sem(); + console_unlock(); kfree(font.data); return rc; } @@ -4103,12 +4103,12 @@ static int con_font_default(struct vc_data *vc, struct console_font_op *op) else name[MAX_FONT_NAME - 1] = 0; - acquire_console_sem(); + console_lock(); if (vc->vc_sw->con_font_default) rc = vc->vc_sw->con_font_default(vc, &font, s); else rc = -ENOSYS; - release_console_sem(); + console_unlock(); if (!rc) { op->width = font.width; op->height = font.height; @@ -4124,7 +4124,7 @@ static int con_font_copy(struct vc_data *vc, struct console_font_op *op) if (vc->vc_mode != KD_TEXT) return -EINVAL; - acquire_console_sem(); + console_lock(); if (!vc->vc_sw->con_font_copy) rc = -ENOSYS; else if (con < 0 || !vc_cons_allocated(con)) @@ -4133,7 +4133,7 @@ static int con_font_copy(struct vc_data *vc, struct console_font_op *op) rc = 0; else rc = vc->vc_sw->con_font_copy(vc, con); - release_console_sem(); + console_unlock(); return rc; } diff --git a/drivers/tty/vt/vt_ioctl.c b/drivers/tty/vt/vt_ioctl.c index 6b68a0fb461..1235ebda6e1 100644 --- a/drivers/tty/vt/vt_ioctl.c +++ b/drivers/tty/vt/vt_ioctl.c @@ -649,12 +649,12 @@ int vt_ioctl(struct tty_struct *tty, struct file * file, /* * explicitly blank/unblank the screen if switching modes */ - acquire_console_sem(); + console_lock(); if (arg == KD_TEXT) do_unblank_screen(1); else do_blank_screen(1); - release_console_sem(); + console_unlock(); break; case KDGETMODE: @@ -893,7 +893,7 @@ int vt_ioctl(struct tty_struct *tty, struct file * file, ret = -EINVAL; goto out; } - acquire_console_sem(); + console_lock(); vc->vt_mode = tmp; /* the frsig is ignored, so we set it to 0 */ vc->vt_mode.frsig = 0; @@ -901,7 +901,7 @@ int vt_ioctl(struct tty_struct *tty, struct file * file, vc->vt_pid = get_pid(task_pid(current)); /* no switch is required -- saw@shade.msu.ru */ vc->vt_newvt = -1; - release_console_sem(); + console_unlock(); break; } @@ -910,9 +910,9 @@ int vt_ioctl(struct tty_struct *tty, struct file * file, struct vt_mode tmp; int rc; - acquire_console_sem(); + console_lock(); memcpy(&tmp, &vc->vt_mode, sizeof(struct vt_mode)); - release_console_sem(); + console_unlock(); rc = copy_to_user(up, &tmp, sizeof(struct vt_mode)); if (rc) @@ -965,9 +965,9 @@ int vt_ioctl(struct tty_struct *tty, struct file * file, ret = -ENXIO; else { arg--; - acquire_console_sem(); + console_lock(); ret = vc_allocate(arg); - release_console_sem(); + console_unlock(); if (ret) break; set_console(arg); @@ -990,7 +990,7 @@ int vt_ioctl(struct tty_struct *tty, struct file * file, ret = -ENXIO; else { vsa.console--; - acquire_console_sem(); + console_lock(); ret = vc_allocate(vsa.console); if (ret == 0) { struct vc_data *nvc; @@ -1003,7 +1003,7 @@ int vt_ioctl(struct tty_struct *tty, struct file * file, put_pid(nvc->vt_pid); nvc->vt_pid = get_pid(task_pid(current)); } - release_console_sem(); + console_unlock(); if (ret) break; /* Commence switch and lock */ @@ -1044,7 +1044,7 @@ int vt_ioctl(struct tty_struct *tty, struct file * file, /* * Switching-from response */ - acquire_console_sem(); + console_lock(); if (vc->vt_newvt >= 0) { if (arg == 0) /* @@ -1063,7 +1063,7 @@ int vt_ioctl(struct tty_struct *tty, struct file * file, vc->vt_newvt = -1; ret = vc_allocate(newvt); if (ret) { - release_console_sem(); + console_unlock(); break; } /* @@ -1083,7 +1083,7 @@ int vt_ioctl(struct tty_struct *tty, struct file * file, if (arg != VT_ACKACQ) ret = -EINVAL; } - release_console_sem(); + console_unlock(); break; /* @@ -1096,20 +1096,20 @@ int vt_ioctl(struct tty_struct *tty, struct file * file, } if (arg == 0) { /* deallocate all unused consoles, but leave 0 */ - acquire_console_sem(); + console_lock(); for (i=1; iv_cols)) ret = -EFAULT; else { - acquire_console_sem(); + console_lock(); for (i = 0; i < MAX_NR_CONSOLES; i++) { vc = vc_cons[i].d; @@ -1135,7 +1135,7 @@ int vt_ioctl(struct tty_struct *tty, struct file * file, vc_resize(vc_cons[i].d, cc, ll); } } - release_console_sem(); + console_unlock(); } break; } @@ -1187,14 +1187,14 @@ int vt_ioctl(struct tty_struct *tty, struct file * file, for (i = 0; i < MAX_NR_CONSOLES; i++) { if (!vc_cons[i].d) continue; - acquire_console_sem(); + console_lock(); if (vlin) vc_cons[i].d->vc_scan_lines = vlin; if (clin) vc_cons[i].d->vc_font.height = clin; vc_cons[i].d->vc_resize_user = 1; vc_resize(vc_cons[i].d, cc, ll); - release_console_sem(); + console_unlock(); } break; } @@ -1367,7 +1367,7 @@ void vc_SAK(struct work_struct *work) struct vc_data *vc; struct tty_struct *tty; - acquire_console_sem(); + console_lock(); vc = vc_con->d; if (vc) { tty = vc->port.tty; @@ -1379,7 +1379,7 @@ void vc_SAK(struct work_struct *work) __do_SAK(tty); reset_vc(vc); } - release_console_sem(); + console_unlock(); } #ifdef CONFIG_COMPAT @@ -1737,10 +1737,10 @@ int vt_move_to_console(unsigned int vt, int alloc) { int prev; - acquire_console_sem(); + console_lock(); /* Graphics mode - up to X */ if (disable_vt_switch) { - release_console_sem(); + console_unlock(); return 0; } prev = fg_console; @@ -1748,7 +1748,7 @@ int vt_move_to_console(unsigned int vt, int alloc) if (alloc && vc_allocate(vt)) { /* we can't have a free VC for now. Too bad, * we don't want to mess the screen for now. */ - release_console_sem(); + console_unlock(); return -ENOSPC; } @@ -1758,10 +1758,10 @@ int vt_move_to_console(unsigned int vt, int alloc) * Let the calling function know so it can decide * what to do. */ - release_console_sem(); + console_unlock(); return -EIO; } - release_console_sem(); + console_unlock(); tty_lock(); if (vt_waitactive(vt + 1)) { pr_debug("Suspend: Can't switch VCs."); @@ -1781,8 +1781,8 @@ int vt_move_to_console(unsigned int vt, int alloc) */ void pm_set_vt_switch(int do_switch) { - acquire_console_sem(); + console_lock(); disable_vt_switch = !do_switch; - release_console_sem(); + console_unlock(); } EXPORT_SYMBOL(pm_set_vt_switch); -- cgit v1.2.3 From 51df0acc3d76cf41d5496ef044cc5717ab5c7f71 Mon Sep 17 00:00:00 2001 From: Amit Shah Date: Tue, 1 Feb 2011 09:31:25 +0530 Subject: virtio: console: Move file back to drivers/char/ Commit 728674a7e466628df2aeec6d11a2ae1ef968fb67 moved virtio_console.c to drivers/tty/hvc/ under the perception of this being an hvc driver. It was such once, but these days it has generic communication capabilities as well, so move it to drivers/char/. In the future, the hvc part from this file can be split off and moved under drivers/tty/hvc/. Signed-off-by: Amit Shah CC: Rusty Russell Acked-by: Arnd Bergmann Signed-off-by: Greg Kroah-Hartman --- drivers/tty/hvc/Makefile | 1 - drivers/tty/hvc/virtio_console.c | 1838 -------------------------------------- 2 files changed, 1839 deletions(-) delete mode 100644 drivers/tty/hvc/virtio_console.c (limited to 'drivers/tty') diff --git a/drivers/tty/hvc/Makefile b/drivers/tty/hvc/Makefile index e6bed5f177f..d79e7e9bf9d 100644 --- a/drivers/tty/hvc/Makefile +++ b/drivers/tty/hvc/Makefile @@ -10,4 +10,3 @@ obj-$(CONFIG_HVC_XEN) += hvc_xen.o obj-$(CONFIG_HVC_IUCV) += hvc_iucv.o obj-$(CONFIG_HVC_UDBG) += hvc_udbg.o obj-$(CONFIG_HVCS) += hvcs.o -obj-$(CONFIG_VIRTIO_CONSOLE) += virtio_console.o diff --git a/drivers/tty/hvc/virtio_console.c b/drivers/tty/hvc/virtio_console.c deleted file mode 100644 index 896a2ced1d2..00000000000 --- a/drivers/tty/hvc/virtio_console.c +++ /dev/null @@ -1,1838 +0,0 @@ -/* - * Copyright (C) 2006, 2007, 2009 Rusty Russell, IBM Corporation - * Copyright (C) 2009, 2010 Red Hat, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "hvc_console.h" - -/* - * This is a global struct for storing common data for all the devices - * this driver handles. - * - * Mainly, it has a linked list for all the consoles in one place so - * that callbacks from hvc for get_chars(), put_chars() work properly - * across multiple devices and multiple ports per device. - */ -struct ports_driver_data { - /* Used for registering chardevs */ - struct class *class; - - /* Used for exporting per-port information to debugfs */ - struct dentry *debugfs_dir; - - /* List of all the devices we're handling */ - struct list_head portdevs; - - /* Number of devices this driver is handling */ - unsigned int index; - - /* - * This is used to keep track of the number of hvc consoles - * spawned by this driver. This number is given as the first - * argument to hvc_alloc(). To correctly map an initial - * console spawned via hvc_instantiate to the console being - * hooked up via hvc_alloc, we need to pass the same vtermno. - * - * We also just assume the first console being initialised was - * the first one that got used as the initial console. - */ - unsigned int next_vtermno; - - /* All the console devices handled by this driver */ - struct list_head consoles; -}; -static struct ports_driver_data pdrvdata; - -DEFINE_SPINLOCK(pdrvdata_lock); - -/* This struct holds information that's relevant only for console ports */ -struct console { - /* We'll place all consoles in a list in the pdrvdata struct */ - struct list_head list; - - /* The hvc device associated with this console port */ - struct hvc_struct *hvc; - - /* The size of the console */ - struct winsize ws; - - /* - * This number identifies the number that we used to register - * with hvc in hvc_instantiate() and hvc_alloc(); this is the - * number passed on by the hvc callbacks to us to - * differentiate between the other console ports handled by - * this driver - */ - u32 vtermno; -}; - -struct port_buffer { - char *buf; - - /* size of the buffer in *buf above */ - size_t size; - - /* used length of the buffer */ - size_t len; - /* offset in the buf from which to consume data */ - size_t offset; -}; - -/* - * This is a per-device struct that stores data common to all the - * ports for that device (vdev->priv). - */ -struct ports_device { - /* Next portdev in the list, head is in the pdrvdata struct */ - struct list_head list; - - /* - * Workqueue handlers where we process deferred work after - * notification - */ - struct work_struct control_work; - - struct list_head ports; - - /* To protect the list of ports */ - spinlock_t ports_lock; - - /* To protect the vq operations for the control channel */ - spinlock_t cvq_lock; - - /* The current config space is stored here */ - struct virtio_console_config config; - - /* The virtio device we're associated with */ - struct virtio_device *vdev; - - /* - * A couple of virtqueues for the control channel: one for - * guest->host transfers, one for host->guest transfers - */ - struct virtqueue *c_ivq, *c_ovq; - - /* Array of per-port IO virtqueues */ - struct virtqueue **in_vqs, **out_vqs; - - /* Used for numbering devices for sysfs and debugfs */ - unsigned int drv_index; - - /* Major number for this device. Ports will be created as minors. */ - int chr_major; -}; - -/* This struct holds the per-port data */ -struct port { - /* Next port in the list, head is in the ports_device */ - struct list_head list; - - /* Pointer to the parent virtio_console device */ - struct ports_device *portdev; - - /* The current buffer from which data has to be fed to readers */ - struct port_buffer *inbuf; - - /* - * To protect the operations on the in_vq associated with this - * port. Has to be a spinlock because it can be called from - * interrupt context (get_char()). - */ - spinlock_t inbuf_lock; - - /* Protect the operations on the out_vq. */ - spinlock_t outvq_lock; - - /* The IO vqs for this port */ - struct virtqueue *in_vq, *out_vq; - - /* File in the debugfs directory that exposes this port's information */ - struct dentry *debugfs_file; - - /* - * The entries in this struct will be valid if this port is - * hooked up to an hvc console - */ - struct console cons; - - /* Each port associates with a separate char device */ - struct cdev *cdev; - struct device *dev; - - /* Reference-counting to handle port hot-unplugs and file operations */ - struct kref kref; - - /* A waitqueue for poll() or blocking read operations */ - wait_queue_head_t waitqueue; - - /* The 'name' of the port that we expose via sysfs properties */ - char *name; - - /* We can notify apps of host connect / disconnect events via SIGIO */ - struct fasync_struct *async_queue; - - /* The 'id' to identify the port with the Host */ - u32 id; - - bool outvq_full; - - /* Is the host device open */ - bool host_connected; - - /* We should allow only one process to open a port */ - bool guest_connected; -}; - -/* This is the very early arch-specified put chars function. */ -static int (*early_put_chars)(u32, const char *, int); - -static struct port *find_port_by_vtermno(u32 vtermno) -{ - struct port *port; - struct console *cons; - unsigned long flags; - - spin_lock_irqsave(&pdrvdata_lock, flags); - list_for_each_entry(cons, &pdrvdata.consoles, list) { - if (cons->vtermno == vtermno) { - port = container_of(cons, struct port, cons); - goto out; - } - } - port = NULL; -out: - spin_unlock_irqrestore(&pdrvdata_lock, flags); - return port; -} - -static struct port *find_port_by_devt_in_portdev(struct ports_device *portdev, - dev_t dev) -{ - struct port *port; - unsigned long flags; - - spin_lock_irqsave(&portdev->ports_lock, flags); - list_for_each_entry(port, &portdev->ports, list) - if (port->cdev->dev == dev) - goto out; - port = NULL; -out: - spin_unlock_irqrestore(&portdev->ports_lock, flags); - - return port; -} - -static struct port *find_port_by_devt(dev_t dev) -{ - struct ports_device *portdev; - struct port *port; - unsigned long flags; - - spin_lock_irqsave(&pdrvdata_lock, flags); - list_for_each_entry(portdev, &pdrvdata.portdevs, list) { - port = find_port_by_devt_in_portdev(portdev, dev); - if (port) - goto out; - } - port = NULL; -out: - spin_unlock_irqrestore(&pdrvdata_lock, flags); - return port; -} - -static struct port *find_port_by_id(struct ports_device *portdev, u32 id) -{ - struct port *port; - unsigned long flags; - - spin_lock_irqsave(&portdev->ports_lock, flags); - list_for_each_entry(port, &portdev->ports, list) - if (port->id == id) - goto out; - port = NULL; -out: - spin_unlock_irqrestore(&portdev->ports_lock, flags); - - return port; -} - -static struct port *find_port_by_vq(struct ports_device *portdev, - struct virtqueue *vq) -{ - struct port *port; - unsigned long flags; - - spin_lock_irqsave(&portdev->ports_lock, flags); - list_for_each_entry(port, &portdev->ports, list) - if (port->in_vq == vq || port->out_vq == vq) - goto out; - port = NULL; -out: - spin_unlock_irqrestore(&portdev->ports_lock, flags); - return port; -} - -static bool is_console_port(struct port *port) -{ - if (port->cons.hvc) - return true; - return false; -} - -static inline bool use_multiport(struct ports_device *portdev) -{ - /* - * This condition can be true when put_chars is called from - * early_init - */ - if (!portdev->vdev) - return 0; - return portdev->vdev->features[0] & (1 << VIRTIO_CONSOLE_F_MULTIPORT); -} - -static void free_buf(struct port_buffer *buf) -{ - kfree(buf->buf); - kfree(buf); -} - -static struct port_buffer *alloc_buf(size_t buf_size) -{ - struct port_buffer *buf; - - buf = kmalloc(sizeof(*buf), GFP_KERNEL); - if (!buf) - goto fail; - buf->buf = kzalloc(buf_size, GFP_KERNEL); - if (!buf->buf) - goto free_buf; - buf->len = 0; - buf->offset = 0; - buf->size = buf_size; - return buf; - -free_buf: - kfree(buf); -fail: - return NULL; -} - -/* Callers should take appropriate locks */ -static void *get_inbuf(struct port *port) -{ - struct port_buffer *buf; - struct virtqueue *vq; - unsigned int len; - - vq = port->in_vq; - buf = virtqueue_get_buf(vq, &len); - if (buf) { - buf->len = len; - buf->offset = 0; - } - return buf; -} - -/* - * Create a scatter-gather list representing our input buffer and put - * it in the queue. - * - * Callers should take appropriate locks. - */ -static int add_inbuf(struct virtqueue *vq, struct port_buffer *buf) -{ - struct scatterlist sg[1]; - int ret; - - sg_init_one(sg, buf->buf, buf->size); - - ret = virtqueue_add_buf(vq, sg, 0, 1, buf); - virtqueue_kick(vq); - return ret; -} - -/* Discard any unread data this port has. Callers lockers. */ -static void discard_port_data(struct port *port) -{ - struct port_buffer *buf; - struct virtqueue *vq; - unsigned int len; - int ret; - - vq = port->in_vq; - if (port->inbuf) - buf = port->inbuf; - else - buf = virtqueue_get_buf(vq, &len); - - ret = 0; - while (buf) { - if (add_inbuf(vq, buf) < 0) { - ret++; - free_buf(buf); - } - buf = virtqueue_get_buf(vq, &len); - } - port->inbuf = NULL; - if (ret) - dev_warn(port->dev, "Errors adding %d buffers back to vq\n", - ret); -} - -static bool port_has_data(struct port *port) -{ - unsigned long flags; - bool ret; - - spin_lock_irqsave(&port->inbuf_lock, flags); - if (port->inbuf) { - ret = true; - goto out; - } - port->inbuf = get_inbuf(port); - if (port->inbuf) { - ret = true; - goto out; - } - ret = false; -out: - spin_unlock_irqrestore(&port->inbuf_lock, flags); - return ret; -} - -static ssize_t __send_control_msg(struct ports_device *portdev, u32 port_id, - unsigned int event, unsigned int value) -{ - struct scatterlist sg[1]; - struct virtio_console_control cpkt; - struct virtqueue *vq; - unsigned int len; - - if (!use_multiport(portdev)) - return 0; - - cpkt.id = port_id; - cpkt.event = event; - cpkt.value = value; - - vq = portdev->c_ovq; - - sg_init_one(sg, &cpkt, sizeof(cpkt)); - if (virtqueue_add_buf(vq, sg, 1, 0, &cpkt) >= 0) { - virtqueue_kick(vq); - while (!virtqueue_get_buf(vq, &len)) - cpu_relax(); - } - return 0; -} - -static ssize_t send_control_msg(struct port *port, unsigned int event, - unsigned int value) -{ - /* Did the port get unplugged before userspace closed it? */ - if (port->portdev) - return __send_control_msg(port->portdev, port->id, event, value); - return 0; -} - -/* Callers must take the port->outvq_lock */ -static void reclaim_consumed_buffers(struct port *port) -{ - void *buf; - unsigned int len; - - while ((buf = virtqueue_get_buf(port->out_vq, &len))) { - kfree(buf); - port->outvq_full = false; - } -} - -static ssize_t send_buf(struct port *port, void *in_buf, size_t in_count, - bool nonblock) -{ - struct scatterlist sg[1]; - struct virtqueue *out_vq; - ssize_t ret; - unsigned long flags; - unsigned int len; - - out_vq = port->out_vq; - - spin_lock_irqsave(&port->outvq_lock, flags); - - reclaim_consumed_buffers(port); - - sg_init_one(sg, in_buf, in_count); - ret = virtqueue_add_buf(out_vq, sg, 1, 0, in_buf); - - /* Tell Host to go! */ - virtqueue_kick(out_vq); - - if (ret < 0) { - in_count = 0; - goto done; - } - - if (ret == 0) - port->outvq_full = true; - - if (nonblock) - goto done; - - /* - * Wait till the host acknowledges it pushed out the data we - * sent. This is done for data from the hvc_console; the tty - * operations are performed with spinlocks held so we can't - * sleep here. An alternative would be to copy the data to a - * buffer and relax the spinning requirement. The downside is - * we need to kmalloc a GFP_ATOMIC buffer each time the - * console driver writes something out. - */ - while (!virtqueue_get_buf(out_vq, &len)) - cpu_relax(); -done: - spin_unlock_irqrestore(&port->outvq_lock, flags); - /* - * We're expected to return the amount of data we wrote -- all - * of it - */ - return in_count; -} - -/* - * Give out the data that's requested from the buffer that we have - * queued up. - */ -static ssize_t fill_readbuf(struct port *port, char *out_buf, size_t out_count, - bool to_user) -{ - struct port_buffer *buf; - unsigned long flags; - - if (!out_count || !port_has_data(port)) - return 0; - - buf = port->inbuf; - out_count = min(out_count, buf->len - buf->offset); - - if (to_user) { - ssize_t ret; - - ret = copy_to_user(out_buf, buf->buf + buf->offset, out_count); - if (ret) - return -EFAULT; - } else { - memcpy(out_buf, buf->buf + buf->offset, out_count); - } - - buf->offset += out_count; - - if (buf->offset == buf->len) { - /* - * We're done using all the data in this buffer. - * Re-queue so that the Host can send us more data. - */ - spin_lock_irqsave(&port->inbuf_lock, flags); - port->inbuf = NULL; - - if (add_inbuf(port->in_vq, buf) < 0) - dev_warn(port->dev, "failed add_buf\n"); - - spin_unlock_irqrestore(&port->inbuf_lock, flags); - } - /* Return the number of bytes actually copied */ - return out_count; -} - -/* The condition that must be true for polling to end */ -static bool will_read_block(struct port *port) -{ - if (!port->guest_connected) { - /* Port got hot-unplugged. Let's exit. */ - return false; - } - return !port_has_data(port) && port->host_connected; -} - -static bool will_write_block(struct port *port) -{ - bool ret; - - if (!port->guest_connected) { - /* Port got hot-unplugged. Let's exit. */ - return false; - } - if (!port->host_connected) - return true; - - spin_lock_irq(&port->outvq_lock); - /* - * Check if the Host has consumed any buffers since we last - * sent data (this is only applicable for nonblocking ports). - */ - reclaim_consumed_buffers(port); - ret = port->outvq_full; - spin_unlock_irq(&port->outvq_lock); - - return ret; -} - -static ssize_t port_fops_read(struct file *filp, char __user *ubuf, - size_t count, loff_t *offp) -{ - struct port *port; - ssize_t ret; - - port = filp->private_data; - - if (!port_has_data(port)) { - /* - * If nothing's connected on the host just return 0 in - * case of list_empty; this tells the userspace app - * that there's no connection - */ - if (!port->host_connected) - return 0; - if (filp->f_flags & O_NONBLOCK) - return -EAGAIN; - - ret = wait_event_interruptible(port->waitqueue, - !will_read_block(port)); - if (ret < 0) - return ret; - } - /* Port got hot-unplugged. */ - if (!port->guest_connected) - return -ENODEV; - /* - * We could've received a disconnection message while we were - * waiting for more data. - * - * This check is not clubbed in the if() statement above as we - * might receive some data as well as the host could get - * disconnected after we got woken up from our wait. So we - * really want to give off whatever data we have and only then - * check for host_connected. - */ - if (!port_has_data(port) && !port->host_connected) - return 0; - - return fill_readbuf(port, ubuf, count, true); -} - -static ssize_t port_fops_write(struct file *filp, const char __user *ubuf, - size_t count, loff_t *offp) -{ - struct port *port; - char *buf; - ssize_t ret; - bool nonblock; - - /* Userspace could be out to fool us */ - if (!count) - return 0; - - port = filp->private_data; - - nonblock = filp->f_flags & O_NONBLOCK; - - if (will_write_block(port)) { - if (nonblock) - return -EAGAIN; - - ret = wait_event_interruptible(port->waitqueue, - !will_write_block(port)); - if (ret < 0) - return ret; - } - /* Port got hot-unplugged. */ - if (!port->guest_connected) - return -ENODEV; - - count = min((size_t)(32 * 1024), count); - - buf = kmalloc(count, GFP_KERNEL); - if (!buf) - return -ENOMEM; - - ret = copy_from_user(buf, ubuf, count); - if (ret) { - ret = -EFAULT; - goto free_buf; - } - - /* - * We now ask send_buf() to not spin for generic ports -- we - * can re-use the same code path that non-blocking file - * descriptors take for blocking file descriptors since the - * wait is already done and we're certain the write will go - * through to the host. - */ - nonblock = true; - ret = send_buf(port, buf, count, nonblock); - - if (nonblock && ret > 0) - goto out; - -free_buf: - kfree(buf); -out: - return ret; -} - -static unsigned int port_fops_poll(struct file *filp, poll_table *wait) -{ - struct port *port; - unsigned int ret; - - port = filp->private_data; - poll_wait(filp, &port->waitqueue, wait); - - if (!port->guest_connected) { - /* Port got unplugged */ - return POLLHUP; - } - ret = 0; - if (!will_read_block(port)) - ret |= POLLIN | POLLRDNORM; - if (!will_write_block(port)) - ret |= POLLOUT; - if (!port->host_connected) - ret |= POLLHUP; - - return ret; -} - -static void remove_port(struct kref *kref); - -static int port_fops_release(struct inode *inode, struct file *filp) -{ - struct port *port; - - port = filp->private_data; - - /* Notify host of port being closed */ - send_control_msg(port, VIRTIO_CONSOLE_PORT_OPEN, 0); - - spin_lock_irq(&port->inbuf_lock); - port->guest_connected = false; - - discard_port_data(port); - - spin_unlock_irq(&port->inbuf_lock); - - spin_lock_irq(&port->outvq_lock); - reclaim_consumed_buffers(port); - spin_unlock_irq(&port->outvq_lock); - - /* - * Locks aren't necessary here as a port can't be opened after - * unplug, and if a port isn't unplugged, a kref would already - * exist for the port. Plus, taking ports_lock here would - * create a dependency on other locks taken by functions - * inside remove_port if we're the last holder of the port, - * creating many problems. - */ - kref_put(&port->kref, remove_port); - - return 0; -} - -static int port_fops_open(struct inode *inode, struct file *filp) -{ - struct cdev *cdev = inode->i_cdev; - struct port *port; - int ret; - - port = find_port_by_devt(cdev->dev); - filp->private_data = port; - - /* Prevent against a port getting hot-unplugged at the same time */ - spin_lock_irq(&port->portdev->ports_lock); - kref_get(&port->kref); - spin_unlock_irq(&port->portdev->ports_lock); - - /* - * Don't allow opening of console port devices -- that's done - * via /dev/hvc - */ - if (is_console_port(port)) { - ret = -ENXIO; - goto out; - } - - /* Allow only one process to open a particular port at a time */ - spin_lock_irq(&port->inbuf_lock); - if (port->guest_connected) { - spin_unlock_irq(&port->inbuf_lock); - ret = -EMFILE; - goto out; - } - - port->guest_connected = true; - spin_unlock_irq(&port->inbuf_lock); - - spin_lock_irq(&port->outvq_lock); - /* - * There might be a chance that we missed reclaiming a few - * buffers in the window of the port getting previously closed - * and opening now. - */ - reclaim_consumed_buffers(port); - spin_unlock_irq(&port->outvq_lock); - - nonseekable_open(inode, filp); - - /* Notify host of port being opened */ - send_control_msg(filp->private_data, VIRTIO_CONSOLE_PORT_OPEN, 1); - - return 0; -out: - kref_put(&port->kref, remove_port); - return ret; -} - -static int port_fops_fasync(int fd, struct file *filp, int mode) -{ - struct port *port; - - port = filp->private_data; - return fasync_helper(fd, filp, mode, &port->async_queue); -} - -/* - * The file operations that we support: programs in the guest can open - * a console device, read from it, write to it, poll for data and - * close it. The devices are at - * /dev/vportp - */ -static const struct file_operations port_fops = { - .owner = THIS_MODULE, - .open = port_fops_open, - .read = port_fops_read, - .write = port_fops_write, - .poll = port_fops_poll, - .release = port_fops_release, - .fasync = port_fops_fasync, - .llseek = no_llseek, -}; - -/* - * The put_chars() callback is pretty straightforward. - * - * We turn the characters into a scatter-gather list, add it to the - * output queue and then kick the Host. Then we sit here waiting for - * it to finish: inefficient in theory, but in practice - * implementations will do it immediately (lguest's Launcher does). - */ -static int put_chars(u32 vtermno, const char *buf, int count) -{ - struct port *port; - - if (unlikely(early_put_chars)) - return early_put_chars(vtermno, buf, count); - - port = find_port_by_vtermno(vtermno); - if (!port) - return -EPIPE; - - return send_buf(port, (void *)buf, count, false); -} - -/* - * get_chars() is the callback from the hvc_console infrastructure - * when an interrupt is received. - * - * We call out to fill_readbuf that gets us the required data from the - * buffers that are queued up. - */ -static int get_chars(u32 vtermno, char *buf, int count) -{ - struct port *port; - - /* If we've not set up the port yet, we have no input to give. */ - if (unlikely(early_put_chars)) - return 0; - - port = find_port_by_vtermno(vtermno); - if (!port) - return -EPIPE; - - /* If we don't have an input queue yet, we can't get input. */ - BUG_ON(!port->in_vq); - - return fill_readbuf(port, buf, count, false); -} - -static void resize_console(struct port *port) -{ - struct virtio_device *vdev; - - /* The port could have been hot-unplugged */ - if (!port || !is_console_port(port)) - return; - - vdev = port->portdev->vdev; - if (virtio_has_feature(vdev, VIRTIO_CONSOLE_F_SIZE)) - hvc_resize(port->cons.hvc, port->cons.ws); -} - -/* We set the configuration at this point, since we now have a tty */ -static int notifier_add_vio(struct hvc_struct *hp, int data) -{ - struct port *port; - - port = find_port_by_vtermno(hp->vtermno); - if (!port) - return -EINVAL; - - hp->irq_requested = 1; - resize_console(port); - - return 0; -} - -static void notifier_del_vio(struct hvc_struct *hp, int data) -{ - hp->irq_requested = 0; -} - -/* The operations for console ports. */ -static const struct hv_ops hv_ops = { - .get_chars = get_chars, - .put_chars = put_chars, - .notifier_add = notifier_add_vio, - .notifier_del = notifier_del_vio, - .notifier_hangup = notifier_del_vio, -}; - -/* - * Console drivers are initialized very early so boot messages can go - * out, so we do things slightly differently from the generic virtio - * initialization of the net and block drivers. - * - * At this stage, the console is output-only. It's too early to set - * up a virtqueue, so we let the drivers do some boutique early-output - * thing. - */ -int __init virtio_cons_early_init(int (*put_chars)(u32, const char *, int)) -{ - early_put_chars = put_chars; - return hvc_instantiate(0, 0, &hv_ops); -} - -int init_port_console(struct port *port) -{ - int ret; - - /* - * The Host's telling us this port is a console port. Hook it - * up with an hvc console. - * - * To set up and manage our virtual console, we call - * hvc_alloc(). - * - * The first argument of hvc_alloc() is the virtual console - * number. The second argument is the parameter for the - * notification mechanism (like irq number). We currently - * leave this as zero, virtqueues have implicit notifications. - * - * The third argument is a "struct hv_ops" containing the - * put_chars() get_chars(), notifier_add() and notifier_del() - * pointers. The final argument is the output buffer size: we - * can do any size, so we put PAGE_SIZE here. - */ - port->cons.vtermno = pdrvdata.next_vtermno; - - port->cons.hvc = hvc_alloc(port->cons.vtermno, 0, &hv_ops, PAGE_SIZE); - if (IS_ERR(port->cons.hvc)) { - ret = PTR_ERR(port->cons.hvc); - dev_err(port->dev, - "error %d allocating hvc for port\n", ret); - port->cons.hvc = NULL; - return ret; - } - spin_lock_irq(&pdrvdata_lock); - pdrvdata.next_vtermno++; - list_add_tail(&port->cons.list, &pdrvdata.consoles); - spin_unlock_irq(&pdrvdata_lock); - port->guest_connected = true; - - /* - * Start using the new console output if this is the first - * console to come up. - */ - if (early_put_chars) - early_put_chars = NULL; - - /* Notify host of port being opened */ - send_control_msg(port, VIRTIO_CONSOLE_PORT_OPEN, 1); - - return 0; -} - -static ssize_t show_port_name(struct device *dev, - struct device_attribute *attr, char *buffer) -{ - struct port *port; - - port = dev_get_drvdata(dev); - - return sprintf(buffer, "%s\n", port->name); -} - -static DEVICE_ATTR(name, S_IRUGO, show_port_name, NULL); - -static struct attribute *port_sysfs_entries[] = { - &dev_attr_name.attr, - NULL -}; - -static struct attribute_group port_attribute_group = { - .name = NULL, /* put in device directory */ - .attrs = port_sysfs_entries, -}; - -static int debugfs_open(struct inode *inode, struct file *filp) -{ - filp->private_data = inode->i_private; - return 0; -} - -static ssize_t debugfs_read(struct file *filp, char __user *ubuf, - size_t count, loff_t *offp) -{ - struct port *port; - char *buf; - ssize_t ret, out_offset, out_count; - - out_count = 1024; - buf = kmalloc(out_count, GFP_KERNEL); - if (!buf) - return -ENOMEM; - - port = filp->private_data; - out_offset = 0; - out_offset += snprintf(buf + out_offset, out_count, - "name: %s\n", port->name ? port->name : ""); - out_offset += snprintf(buf + out_offset, out_count - out_offset, - "guest_connected: %d\n", port->guest_connected); - out_offset += snprintf(buf + out_offset, out_count - out_offset, - "host_connected: %d\n", port->host_connected); - out_offset += snprintf(buf + out_offset, out_count - out_offset, - "outvq_full: %d\n", port->outvq_full); - out_offset += snprintf(buf + out_offset, out_count - out_offset, - "is_console: %s\n", - is_console_port(port) ? "yes" : "no"); - out_offset += snprintf(buf + out_offset, out_count - out_offset, - "console_vtermno: %u\n", port->cons.vtermno); - - ret = simple_read_from_buffer(ubuf, count, offp, buf, out_offset); - kfree(buf); - return ret; -} - -static const struct file_operations port_debugfs_ops = { - .owner = THIS_MODULE, - .open = debugfs_open, - .read = debugfs_read, -}; - -static void set_console_size(struct port *port, u16 rows, u16 cols) -{ - if (!port || !is_console_port(port)) - return; - - port->cons.ws.ws_row = rows; - port->cons.ws.ws_col = cols; -} - -static unsigned int fill_queue(struct virtqueue *vq, spinlock_t *lock) -{ - struct port_buffer *buf; - unsigned int nr_added_bufs; - int ret; - - nr_added_bufs = 0; - do { - buf = alloc_buf(PAGE_SIZE); - if (!buf) - break; - - spin_lock_irq(lock); - ret = add_inbuf(vq, buf); - if (ret < 0) { - spin_unlock_irq(lock); - free_buf(buf); - break; - } - nr_added_bufs++; - spin_unlock_irq(lock); - } while (ret > 0); - - return nr_added_bufs; -} - -static void send_sigio_to_port(struct port *port) -{ - if (port->async_queue && port->guest_connected) - kill_fasync(&port->async_queue, SIGIO, POLL_OUT); -} - -static int add_port(struct ports_device *portdev, u32 id) -{ - char debugfs_name[16]; - struct port *port; - struct port_buffer *buf; - dev_t devt; - unsigned int nr_added_bufs; - int err; - - port = kmalloc(sizeof(*port), GFP_KERNEL); - if (!port) { - err = -ENOMEM; - goto fail; - } - kref_init(&port->kref); - - port->portdev = portdev; - port->id = id; - - port->name = NULL; - port->inbuf = NULL; - port->cons.hvc = NULL; - port->async_queue = NULL; - - port->cons.ws.ws_row = port->cons.ws.ws_col = 0; - - port->host_connected = port->guest_connected = false; - - port->outvq_full = false; - - port->in_vq = portdev->in_vqs[port->id]; - port->out_vq = portdev->out_vqs[port->id]; - - port->cdev = cdev_alloc(); - if (!port->cdev) { - dev_err(&port->portdev->vdev->dev, "Error allocating cdev\n"); - err = -ENOMEM; - goto free_port; - } - port->cdev->ops = &port_fops; - - devt = MKDEV(portdev->chr_major, id); - err = cdev_add(port->cdev, devt, 1); - if (err < 0) { - dev_err(&port->portdev->vdev->dev, - "Error %d adding cdev for port %u\n", err, id); - goto free_cdev; - } - port->dev = device_create(pdrvdata.class, &port->portdev->vdev->dev, - devt, port, "vport%up%u", - port->portdev->drv_index, id); - if (IS_ERR(port->dev)) { - err = PTR_ERR(port->dev); - dev_err(&port->portdev->vdev->dev, - "Error %d creating device for port %u\n", - err, id); - goto free_cdev; - } - - spin_lock_init(&port->inbuf_lock); - spin_lock_init(&port->outvq_lock); - init_waitqueue_head(&port->waitqueue); - - /* Fill the in_vq with buffers so the host can send us data. */ - nr_added_bufs = fill_queue(port->in_vq, &port->inbuf_lock); - if (!nr_added_bufs) { - dev_err(port->dev, "Error allocating inbufs\n"); - err = -ENOMEM; - goto free_device; - } - - /* - * If we're not using multiport support, this has to be a console port - */ - if (!use_multiport(port->portdev)) { - err = init_port_console(port); - if (err) - goto free_inbufs; - } - - spin_lock_irq(&portdev->ports_lock); - list_add_tail(&port->list, &port->portdev->ports); - spin_unlock_irq(&portdev->ports_lock); - - /* - * Tell the Host we're set so that it can send us various - * configuration parameters for this port (eg, port name, - * caching, whether this is a console port, etc.) - */ - send_control_msg(port, VIRTIO_CONSOLE_PORT_READY, 1); - - if (pdrvdata.debugfs_dir) { - /* - * Finally, create the debugfs file that we can use to - * inspect a port's state at any time - */ - sprintf(debugfs_name, "vport%up%u", - port->portdev->drv_index, id); - port->debugfs_file = debugfs_create_file(debugfs_name, 0444, - pdrvdata.debugfs_dir, - port, - &port_debugfs_ops); - } - return 0; - -free_inbufs: - while ((buf = virtqueue_detach_unused_buf(port->in_vq))) - free_buf(buf); -free_device: - device_destroy(pdrvdata.class, port->dev->devt); -free_cdev: - cdev_del(port->cdev); -free_port: - kfree(port); -fail: - /* The host might want to notify management sw about port add failure */ - __send_control_msg(portdev, id, VIRTIO_CONSOLE_PORT_READY, 0); - return err; -} - -/* No users remain, remove all port-specific data. */ -static void remove_port(struct kref *kref) -{ - struct port *port; - - port = container_of(kref, struct port, kref); - - sysfs_remove_group(&port->dev->kobj, &port_attribute_group); - device_destroy(pdrvdata.class, port->dev->devt); - cdev_del(port->cdev); - - kfree(port->name); - - debugfs_remove(port->debugfs_file); - - kfree(port); -} - -/* - * Port got unplugged. Remove port from portdev's list and drop the - * kref reference. If no userspace has this port opened, it will - * result in immediate removal the port. - */ -static void unplug_port(struct port *port) -{ - struct port_buffer *buf; - - spin_lock_irq(&port->portdev->ports_lock); - list_del(&port->list); - spin_unlock_irq(&port->portdev->ports_lock); - - if (port->guest_connected) { - port->guest_connected = false; - port->host_connected = false; - wake_up_interruptible(&port->waitqueue); - - /* Let the app know the port is going down. */ - send_sigio_to_port(port); - } - - if (is_console_port(port)) { - spin_lock_irq(&pdrvdata_lock); - list_del(&port->cons.list); - spin_unlock_irq(&pdrvdata_lock); -#if 0 - /* - * hvc_remove() not called as removing one hvc port - * results in other hvc ports getting frozen. - * - * Once this is resolved in hvc, this functionality - * will be enabled. Till that is done, the -EPIPE - * return from get_chars() above will help - * hvc_console.c to clean up on ports we remove here. - */ - hvc_remove(port->cons.hvc); -#endif - } - - /* Remove unused data this port might have received. */ - discard_port_data(port); - - reclaim_consumed_buffers(port); - - /* Remove buffers we queued up for the Host to send us data in. */ - while ((buf = virtqueue_detach_unused_buf(port->in_vq))) - free_buf(buf); - - /* - * We should just assume the device itself has gone off -- - * else a close on an open port later will try to send out a - * control message. - */ - port->portdev = NULL; - - /* - * Locks around here are not necessary - a port can't be - * opened after we removed the port struct from ports_list - * above. - */ - kref_put(&port->kref, remove_port); -} - -/* Any private messages that the Host and Guest want to share */ -static void handle_control_message(struct ports_device *portdev, - struct port_buffer *buf) -{ - struct virtio_console_control *cpkt; - struct port *port; - size_t name_size; - int err; - - cpkt = (struct virtio_console_control *)(buf->buf + buf->offset); - - port = find_port_by_id(portdev, cpkt->id); - if (!port && cpkt->event != VIRTIO_CONSOLE_PORT_ADD) { - /* No valid header at start of buffer. Drop it. */ - dev_dbg(&portdev->vdev->dev, - "Invalid index %u in control packet\n", cpkt->id); - return; - } - - switch (cpkt->event) { - case VIRTIO_CONSOLE_PORT_ADD: - if (port) { - dev_dbg(&portdev->vdev->dev, - "Port %u already added\n", port->id); - send_control_msg(port, VIRTIO_CONSOLE_PORT_READY, 1); - break; - } - if (cpkt->id >= portdev->config.max_nr_ports) { - dev_warn(&portdev->vdev->dev, - "Request for adding port with out-of-bound id %u, max. supported id: %u\n", - cpkt->id, portdev->config.max_nr_ports - 1); - break; - } - add_port(portdev, cpkt->id); - break; - case VIRTIO_CONSOLE_PORT_REMOVE: - unplug_port(port); - break; - case VIRTIO_CONSOLE_CONSOLE_PORT: - if (!cpkt->value) - break; - if (is_console_port(port)) - break; - - init_port_console(port); - /* - * Could remove the port here in case init fails - but - * have to notify the host first. - */ - break; - case VIRTIO_CONSOLE_RESIZE: { - struct { - __u16 rows; - __u16 cols; - } size; - - if (!is_console_port(port)) - break; - - memcpy(&size, buf->buf + buf->offset + sizeof(*cpkt), - sizeof(size)); - set_console_size(port, size.rows, size.cols); - - port->cons.hvc->irq_requested = 1; - resize_console(port); - break; - } - case VIRTIO_CONSOLE_PORT_OPEN: - port->host_connected = cpkt->value; - wake_up_interruptible(&port->waitqueue); - /* - * If the host port got closed and the host had any - * unconsumed buffers, we'll be able to reclaim them - * now. - */ - spin_lock_irq(&port->outvq_lock); - reclaim_consumed_buffers(port); - spin_unlock_irq(&port->outvq_lock); - - /* - * If the guest is connected, it'll be interested in - * knowing the host connection state changed. - */ - send_sigio_to_port(port); - break; - case VIRTIO_CONSOLE_PORT_NAME: - /* - * Skip the size of the header and the cpkt to get the size - * of the name that was sent - */ - name_size = buf->len - buf->offset - sizeof(*cpkt) + 1; - - port->name = kmalloc(name_size, GFP_KERNEL); - if (!port->name) { - dev_err(port->dev, - "Not enough space to store port name\n"); - break; - } - strncpy(port->name, buf->buf + buf->offset + sizeof(*cpkt), - name_size - 1); - port->name[name_size - 1] = 0; - - /* - * Since we only have one sysfs attribute, 'name', - * create it only if we have a name for the port. - */ - err = sysfs_create_group(&port->dev->kobj, - &port_attribute_group); - if (err) { - dev_err(port->dev, - "Error %d creating sysfs device attributes\n", - err); - } else { - /* - * Generate a udev event so that appropriate - * symlinks can be created based on udev - * rules. - */ - kobject_uevent(&port->dev->kobj, KOBJ_CHANGE); - } - break; - } -} - -static void control_work_handler(struct work_struct *work) -{ - struct ports_device *portdev; - struct virtqueue *vq; - struct port_buffer *buf; - unsigned int len; - - portdev = container_of(work, struct ports_device, control_work); - vq = portdev->c_ivq; - - spin_lock(&portdev->cvq_lock); - while ((buf = virtqueue_get_buf(vq, &len))) { - spin_unlock(&portdev->cvq_lock); - - buf->len = len; - buf->offset = 0; - - handle_control_message(portdev, buf); - - spin_lock(&portdev->cvq_lock); - if (add_inbuf(portdev->c_ivq, buf) < 0) { - dev_warn(&portdev->vdev->dev, - "Error adding buffer to queue\n"); - free_buf(buf); - } - } - spin_unlock(&portdev->cvq_lock); -} - -static void in_intr(struct virtqueue *vq) -{ - struct port *port; - unsigned long flags; - - port = find_port_by_vq(vq->vdev->priv, vq); - if (!port) - return; - - spin_lock_irqsave(&port->inbuf_lock, flags); - if (!port->inbuf) - port->inbuf = get_inbuf(port); - - /* - * Don't queue up data when port is closed. This condition - * can be reached when a console port is not yet connected (no - * tty is spawned) and the host sends out data to console - * ports. For generic serial ports, the host won't - * (shouldn't) send data till the guest is connected. - */ - if (!port->guest_connected) - discard_port_data(port); - - spin_unlock_irqrestore(&port->inbuf_lock, flags); - - wake_up_interruptible(&port->waitqueue); - - /* Send a SIGIO indicating new data in case the process asked for it */ - send_sigio_to_port(port); - - if (is_console_port(port) && hvc_poll(port->cons.hvc)) - hvc_kick(); -} - -static void control_intr(struct virtqueue *vq) -{ - struct ports_device *portdev; - - portdev = vq->vdev->priv; - schedule_work(&portdev->control_work); -} - -static void config_intr(struct virtio_device *vdev) -{ - struct ports_device *portdev; - - portdev = vdev->priv; - - if (!use_multiport(portdev)) { - struct port *port; - u16 rows, cols; - - vdev->config->get(vdev, - offsetof(struct virtio_console_config, cols), - &cols, sizeof(u16)); - vdev->config->get(vdev, - offsetof(struct virtio_console_config, rows), - &rows, sizeof(u16)); - - port = find_port_by_id(portdev, 0); - set_console_size(port, rows, cols); - - /* - * We'll use this way of resizing only for legacy - * support. For newer userspace - * (VIRTIO_CONSOLE_F_MULTPORT+), use control messages - * to indicate console size changes so that it can be - * done per-port. - */ - resize_console(port); - } -} - -static int init_vqs(struct ports_device *portdev) -{ - vq_callback_t **io_callbacks; - char **io_names; - struct virtqueue **vqs; - u32 i, j, nr_ports, nr_queues; - int err; - - nr_ports = portdev->config.max_nr_ports; - nr_queues = use_multiport(portdev) ? (nr_ports + 1) * 2 : 2; - - vqs = kmalloc(nr_queues * sizeof(struct virtqueue *), GFP_KERNEL); - io_callbacks = kmalloc(nr_queues * sizeof(vq_callback_t *), GFP_KERNEL); - io_names = kmalloc(nr_queues * sizeof(char *), GFP_KERNEL); - portdev->in_vqs = kmalloc(nr_ports * sizeof(struct virtqueue *), - GFP_KERNEL); - portdev->out_vqs = kmalloc(nr_ports * sizeof(struct virtqueue *), - GFP_KERNEL); - if (!vqs || !io_callbacks || !io_names || !portdev->in_vqs || - !portdev->out_vqs) { - err = -ENOMEM; - goto free; - } - - /* - * For backward compat (newer host but older guest), the host - * spawns a console port first and also inits the vqs for port - * 0 before others. - */ - j = 0; - io_callbacks[j] = in_intr; - io_callbacks[j + 1] = NULL; - io_names[j] = "input"; - io_names[j + 1] = "output"; - j += 2; - - if (use_multiport(portdev)) { - io_callbacks[j] = control_intr; - io_callbacks[j + 1] = NULL; - io_names[j] = "control-i"; - io_names[j + 1] = "control-o"; - - for (i = 1; i < nr_ports; i++) { - j += 2; - io_callbacks[j] = in_intr; - io_callbacks[j + 1] = NULL; - io_names[j] = "input"; - io_names[j + 1] = "output"; - } - } - /* Find the queues. */ - err = portdev->vdev->config->find_vqs(portdev->vdev, nr_queues, vqs, - io_callbacks, - (const char **)io_names); - if (err) - goto free; - - j = 0; - portdev->in_vqs[0] = vqs[0]; - portdev->out_vqs[0] = vqs[1]; - j += 2; - if (use_multiport(portdev)) { - portdev->c_ivq = vqs[j]; - portdev->c_ovq = vqs[j + 1]; - - for (i = 1; i < nr_ports; i++) { - j += 2; - portdev->in_vqs[i] = vqs[j]; - portdev->out_vqs[i] = vqs[j + 1]; - } - } - kfree(io_names); - kfree(io_callbacks); - kfree(vqs); - - return 0; - -free: - kfree(portdev->out_vqs); - kfree(portdev->in_vqs); - kfree(io_names); - kfree(io_callbacks); - kfree(vqs); - - return err; -} - -static const struct file_operations portdev_fops = { - .owner = THIS_MODULE, -}; - -/* - * Once we're further in boot, we get probed like any other virtio - * device. - * - * If the host also supports multiple console ports, we check the - * config space to see how many ports the host has spawned. We - * initialize each port found. - */ -static int __devinit virtcons_probe(struct virtio_device *vdev) -{ - struct ports_device *portdev; - int err; - bool multiport; - - portdev = kmalloc(sizeof(*portdev), GFP_KERNEL); - if (!portdev) { - err = -ENOMEM; - goto fail; - } - - /* Attach this portdev to this virtio_device, and vice-versa. */ - portdev->vdev = vdev; - vdev->priv = portdev; - - spin_lock_irq(&pdrvdata_lock); - portdev->drv_index = pdrvdata.index++; - spin_unlock_irq(&pdrvdata_lock); - - portdev->chr_major = register_chrdev(0, "virtio-portsdev", - &portdev_fops); - if (portdev->chr_major < 0) { - dev_err(&vdev->dev, - "Error %d registering chrdev for device %u\n", - portdev->chr_major, portdev->drv_index); - err = portdev->chr_major; - goto free; - } - - multiport = false; - portdev->config.max_nr_ports = 1; - if (virtio_has_feature(vdev, VIRTIO_CONSOLE_F_MULTIPORT)) { - multiport = true; - vdev->features[0] |= 1 << VIRTIO_CONSOLE_F_MULTIPORT; - - vdev->config->get(vdev, offsetof(struct virtio_console_config, - max_nr_ports), - &portdev->config.max_nr_ports, - sizeof(portdev->config.max_nr_ports)); - } - - /* Let the Host know we support multiple ports.*/ - vdev->config->finalize_features(vdev); - - err = init_vqs(portdev); - if (err < 0) { - dev_err(&vdev->dev, "Error %d initializing vqs\n", err); - goto free_chrdev; - } - - spin_lock_init(&portdev->ports_lock); - INIT_LIST_HEAD(&portdev->ports); - - if (multiport) { - unsigned int nr_added_bufs; - - spin_lock_init(&portdev->cvq_lock); - INIT_WORK(&portdev->control_work, &control_work_handler); - - nr_added_bufs = fill_queue(portdev->c_ivq, &portdev->cvq_lock); - if (!nr_added_bufs) { - dev_err(&vdev->dev, - "Error allocating buffers for control queue\n"); - err = -ENOMEM; - goto free_vqs; - } - } else { - /* - * For backward compatibility: Create a console port - * if we're running on older host. - */ - add_port(portdev, 0); - } - - spin_lock_irq(&pdrvdata_lock); - list_add_tail(&portdev->list, &pdrvdata.portdevs); - spin_unlock_irq(&pdrvdata_lock); - - __send_control_msg(portdev, VIRTIO_CONSOLE_BAD_ID, - VIRTIO_CONSOLE_DEVICE_READY, 1); - return 0; - -free_vqs: - /* The host might want to notify mgmt sw about device add failure */ - __send_control_msg(portdev, VIRTIO_CONSOLE_BAD_ID, - VIRTIO_CONSOLE_DEVICE_READY, 0); - vdev->config->del_vqs(vdev); - kfree(portdev->in_vqs); - kfree(portdev->out_vqs); -free_chrdev: - unregister_chrdev(portdev->chr_major, "virtio-portsdev"); -free: - kfree(portdev); -fail: - return err; -} - -static void virtcons_remove(struct virtio_device *vdev) -{ - struct ports_device *portdev; - struct port *port, *port2; - - portdev = vdev->priv; - - spin_lock_irq(&pdrvdata_lock); - list_del(&portdev->list); - spin_unlock_irq(&pdrvdata_lock); - - /* Disable interrupts for vqs */ - vdev->config->reset(vdev); - /* Finish up work that's lined up */ - cancel_work_sync(&portdev->control_work); - - list_for_each_entry_safe(port, port2, &portdev->ports, list) - unplug_port(port); - - unregister_chrdev(portdev->chr_major, "virtio-portsdev"); - - /* - * When yanking out a device, we immediately lose the - * (device-side) queues. So there's no point in keeping the - * guest side around till we drop our final reference. This - * also means that any ports which are in an open state will - * have to just stop using the port, as the vqs are going - * away. - */ - if (use_multiport(portdev)) { - struct port_buffer *buf; - unsigned int len; - - while ((buf = virtqueue_get_buf(portdev->c_ivq, &len))) - free_buf(buf); - - while ((buf = virtqueue_detach_unused_buf(portdev->c_ivq))) - free_buf(buf); - } - - vdev->config->del_vqs(vdev); - kfree(portdev->in_vqs); - kfree(portdev->out_vqs); - - kfree(portdev); -} - -static struct virtio_device_id id_table[] = { - { VIRTIO_ID_CONSOLE, VIRTIO_DEV_ANY_ID }, - { 0 }, -}; - -static unsigned int features[] = { - VIRTIO_CONSOLE_F_SIZE, - VIRTIO_CONSOLE_F_MULTIPORT, -}; - -static struct virtio_driver virtio_console = { - .feature_table = features, - .feature_table_size = ARRAY_SIZE(features), - .driver.name = KBUILD_MODNAME, - .driver.owner = THIS_MODULE, - .id_table = id_table, - .probe = virtcons_probe, - .remove = virtcons_remove, - .config_changed = config_intr, -}; - -static int __init init(void) -{ - int err; - - pdrvdata.class = class_create(THIS_MODULE, "virtio-ports"); - if (IS_ERR(pdrvdata.class)) { - err = PTR_ERR(pdrvdata.class); - pr_err("Error %d creating virtio-ports class\n", err); - return err; - } - - pdrvdata.debugfs_dir = debugfs_create_dir("virtio-ports", NULL); - if (!pdrvdata.debugfs_dir) { - pr_warning("Error %ld creating debugfs dir for virtio-ports\n", - PTR_ERR(pdrvdata.debugfs_dir)); - } - INIT_LIST_HEAD(&pdrvdata.consoles); - INIT_LIST_HEAD(&pdrvdata.portdevs); - - return register_virtio_driver(&virtio_console); -} - -static void __exit fini(void) -{ - unregister_virtio_driver(&virtio_console); - - class_destroy(pdrvdata.class); - if (pdrvdata.debugfs_dir) - debugfs_remove_recursive(pdrvdata.debugfs_dir); -} -module_init(init); -module_exit(fini); - -MODULE_DEVICE_TABLE(virtio, id_table); -MODULE_DESCRIPTION("Virtio console driver"); -MODULE_LICENSE("GPL"); -- cgit v1.2.3 From 91f78f36694b8748fda855b1f9e3614b027a744f Mon Sep 17 00:00:00 2001 From: Ken Mills Date: Tue, 25 Jan 2011 14:17:45 +0000 Subject: n_gsm: copy mtu over when configuring via ioctl interface This field is settable but did not get copied. Signed-off-by: Ken Mills Signed-off-by: Alan Cox Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/tty/n_gsm.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/tty') diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c index 44b8412a04e..aa2e5d3eb01 100644 --- a/drivers/tty/n_gsm.c +++ b/drivers/tty/n_gsm.c @@ -2414,6 +2414,7 @@ static int gsmld_config(struct tty_struct *tty, struct gsm_mux *gsm, gsm->initiator = c->initiator; gsm->mru = c->mru; + gsm->mtu = c->mtu; gsm->encoding = c->encapsulation; gsm->adaption = c->adaption; gsm->n2 = c->n2; -- cgit v1.2.3 From 3e517f4b1de4787ecff87a73a9865a0b1aa2b10b Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Sun, 16 Jan 2011 05:16:14 +0000 Subject: 68360serial: Plumb in rs_360_get_icount() Commit 0587102cf9f427c185bfdeb2cef41e13ee0264b1 replaced a direct implementation of SIOCGICOUNT with an implementation of tty_operations::get_icount, but it did not actually set rs_360_ops.get_icount. Signed-off-by: Ben Hutchings Cc: stable@kernel.org [2.6.37] Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/68360serial.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/68360serial.c b/drivers/tty/serial/68360serial.c index 88b13356ec1..bc21eeae8fd 100644 --- a/drivers/tty/serial/68360serial.c +++ b/drivers/tty/serial/68360serial.c @@ -2428,6 +2428,7 @@ static const struct tty_operations rs_360_ops = { /* .read_proc = rs_360_read_proc, */ .tiocmget = rs_360_tiocmget, .tiocmset = rs_360_tiocmset, + .get_icount = rs_360_get_icount, }; static int __init rs_360_init(void) -- cgit v1.2.3 From 0f66e50af53d39edebf4bc64ef90077e738c171f Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Tue, 11 Jan 2011 00:16:43 -0500 Subject: serial: bfin_5xx: split uart RX lock from uart port lock to avoid deadlock The RX lock is used to protect the RX buffer from concurrent access in DMA mode between the timer and RX interrupt routines. It is independent from the uart lock which is used to protect the TX buffer. It is possible for a uart TX transfer to be started up from the RX interrupt handler if low latency is enabled. So we need to split the locks to avoid deadlocking in this situation. In PIO mode, the RX lock is not necessary because the handle_simple_irq and handle_level_irq functions ensure driver interrupt handlers are called once on one core. And now that the RX path has its own lock, the TX interrupt has nothing to do with the RX path, so disabling it at the same time. Signed-off-by: Sonic Zhang Signed-off-by: Mike Frysinger Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/bfin_5xx.c | 15 ++++++--------- 1 file changed, 6 insertions(+), 9 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/bfin_5xx.c b/drivers/tty/serial/bfin_5xx.c index e381b895b04..9b1ff2b6bb3 100644 --- a/drivers/tty/serial/bfin_5xx.c +++ b/drivers/tty/serial/bfin_5xx.c @@ -370,10 +370,8 @@ static irqreturn_t bfin_serial_rx_int(int irq, void *dev_id) { struct bfin_serial_port *uart = dev_id; - spin_lock(&uart->port.lock); while (UART_GET_LSR(uart) & DR) bfin_serial_rx_chars(uart); - spin_unlock(&uart->port.lock); return IRQ_HANDLED; } @@ -490,9 +488,8 @@ void bfin_serial_rx_dma_timeout(struct bfin_serial_port *uart) { int x_pos, pos; - dma_disable_irq(uart->tx_dma_channel); - dma_disable_irq(uart->rx_dma_channel); - spin_lock_bh(&uart->port.lock); + dma_disable_irq_nosync(uart->rx_dma_channel); + spin_lock_bh(&uart->rx_lock); /* 2D DMA RX buffer ring is used. Because curr_y_count and * curr_x_count can't be read as an atomic operation, @@ -523,8 +520,7 @@ void bfin_serial_rx_dma_timeout(struct bfin_serial_port *uart) uart->rx_dma_buf.tail = uart->rx_dma_buf.head; } - spin_unlock_bh(&uart->port.lock); - dma_enable_irq(uart->tx_dma_channel); + spin_unlock_bh(&uart->rx_lock); dma_enable_irq(uart->rx_dma_channel); mod_timer(&(uart->rx_dma_timer), jiffies + DMA_RX_FLUSH_JIFFIES); @@ -571,7 +567,7 @@ static irqreturn_t bfin_serial_dma_rx_int(int irq, void *dev_id) unsigned short irqstat; int x_pos, pos; - spin_lock(&uart->port.lock); + spin_lock(&uart->rx_lock); irqstat = get_dma_curr_irqstat(uart->rx_dma_channel); clear_dma_irqstat(uart->rx_dma_channel); @@ -589,7 +585,7 @@ static irqreturn_t bfin_serial_dma_rx_int(int irq, void *dev_id) uart->rx_dma_buf.tail = uart->rx_dma_buf.head; } - spin_unlock(&uart->port.lock); + spin_unlock(&uart->rx_lock); return IRQ_HANDLED; } @@ -1332,6 +1328,7 @@ static int bfin_serial_probe(struct platform_device *pdev) } #ifdef CONFIG_SERIAL_BFIN_DMA + spin_lock_init(&uart->rx_lock); uart->tx_done = 1; uart->tx_count = 0; -- cgit v1.2.3 From bc0c36d3c831b5f33ca0dab39535f5deb8c55b62 Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Tue, 8 Feb 2011 21:32:36 +1000 Subject: m68knommu: fix dereference of port.tty The struct_tty associated with a port is now a direct pointer from within the local private driver info struct. So fix all uses of it. Signed-off-by: Greg Ungerer --- drivers/tty/serial/68328serial.c | 29 ++++++++++++++--------------- 1 file changed, 14 insertions(+), 15 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/68328serial.c b/drivers/tty/serial/68328serial.c index be0ebce36e5..de0160e3f8c 100644 --- a/drivers/tty/serial/68328serial.c +++ b/drivers/tty/serial/68328serial.c @@ -262,7 +262,7 @@ static void status_handle(struct m68k_serial *info, unsigned short status) static void receive_chars(struct m68k_serial *info, unsigned short rx) { - struct tty_struct *tty = info->port.tty; + struct tty_struct *tty = info->tty; m68328_uart *uart = &uart_addr[info->line]; unsigned char ch, flag; @@ -329,7 +329,7 @@ static void transmit_chars(struct m68k_serial *info) goto clear_and_return; } - if((info->xmit_cnt <= 0) || info->port.tty->stopped) { + if((info->xmit_cnt <= 0) || info->tty->stopped) { /* That's peculiar... TX ints off */ uart->ustcnt &= ~USTCNT_TX_INTR_MASK; goto clear_and_return; @@ -383,7 +383,7 @@ static void do_softint(struct work_struct *work) struct m68k_serial *info = container_of(work, struct m68k_serial, tqueue); struct tty_struct *tty; - tty = info->port.tty; + tty = info->tty; if (!tty) return; #if 0 @@ -407,7 +407,7 @@ static void do_serial_hangup(struct work_struct *work) struct m68k_serial *info = container_of(work, struct m68k_serial, tqueue_hangup); struct tty_struct *tty; - tty = info->port.tty; + tty = info->tty; if (!tty) return; @@ -451,8 +451,8 @@ static int startup(struct m68k_serial * info) uart->ustcnt = USTCNT_UEN | USTCNT_RXEN | USTCNT_RX_INTR_MASK; #endif - if (info->port.tty) - clear_bit(TTY_IO_ERROR, &info->port.tty->flags); + if (info->tty) + clear_bit(TTY_IO_ERROR, &info->tty->flags); info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; /* @@ -486,8 +486,8 @@ static void shutdown(struct m68k_serial * info) info->xmit_buf = 0; } - if (info->port.tty) - set_bit(TTY_IO_ERROR, &info->port.tty->flags); + if (info->tty) + set_bit(TTY_IO_ERROR, &info->tty->flags); info->flags &= ~S_INITIALIZED; local_irq_restore(flags); @@ -553,9 +553,9 @@ static void change_speed(struct m68k_serial *info) unsigned cflag; int i; - if (!info->port.tty || !info->port.tty->termios) + if (!info->tty || !info->tty->termios) return; - cflag = info->port.tty->termios->c_cflag; + cflag = info->tty->termios->c_cflag; if (!(port = info->port)) return; @@ -970,7 +970,6 @@ static void send_break(struct m68k_serial * info, unsigned int duration) static int rs_ioctl(struct tty_struct *tty, struct file * file, unsigned int cmd, unsigned long arg) { - int error; struct m68k_serial * info = (struct m68k_serial *)tty->driver_data; int retval; @@ -1104,7 +1103,7 @@ static void rs_close(struct tty_struct *tty, struct file * filp) tty_ldisc_flush(tty); tty->closing = 0; info->event = 0; - info->port.tty = NULL; + info->tty = NULL; #warning "This is not and has never been valid so fix it" #if 0 if (tty->ldisc.num != ldiscs[N_TTY].num) { @@ -1142,7 +1141,7 @@ void rs_hangup(struct tty_struct *tty) info->event = 0; info->count = 0; info->flags &= ~S_NORMAL_ACTIVE; - info->port.tty = NULL; + info->tty = NULL; wake_up_interruptible(&info->open_wait); } @@ -1261,7 +1260,7 @@ int rs_open(struct tty_struct *tty, struct file * filp) info->count++; tty->driver_data = info; - info->port.tty = tty; + info->tty = tty; /* * Start up serial port @@ -1338,7 +1337,7 @@ rs68328_init(void) info = &m68k_soft[i]; info->magic = SERIAL_MAGIC; info->port = (int) &uart_addr[i]; - info->port.tty = NULL; + info->tty = NULL; info->irq = uart_irqs[i]; info->custom_divisor = 16; info->close_delay = 50; -- cgit v1.2.3 From 58a69cb47ec6991bf006a3e5d202e8571b0327a4 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 16 Feb 2011 09:25:31 +0100 Subject: workqueue, freezer: unify spelling of 'freeze' + 'able' to 'freezable' There are two spellings in use for 'freeze' + 'able' - 'freezable' and 'freezeable'. The former is the more prominent one. The latter is mostly used by workqueue and in a few other odd places. Unify the spelling to 'freezable'. Signed-off-by: Tejun Heo Reported-by: Alan Stern Acked-by: "Rafael J. Wysocki" Acked-by: Greg Kroah-Hartman Acked-by: Dmitry Torokhov Cc: David Woodhouse Cc: Alex Dubov Cc: "David S. Miller" Cc: Steven Whitehouse --- drivers/tty/serial/max3100.c | 2 +- drivers/tty/serial/max3107.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/max3100.c b/drivers/tty/serial/max3100.c index beb1afa27d8..7b951adac54 100644 --- a/drivers/tty/serial/max3100.c +++ b/drivers/tty/serial/max3100.c @@ -601,7 +601,7 @@ static int max3100_startup(struct uart_port *port) s->rts = 0; sprintf(b, "max3100-%d", s->minor); - s->workqueue = create_freezeable_workqueue(b); + s->workqueue = create_freezable_workqueue(b); if (!s->workqueue) { dev_warn(&s->spi->dev, "cannot create workqueue\n"); return -EBUSY; diff --git a/drivers/tty/serial/max3107.c b/drivers/tty/serial/max3107.c index 910870edf70..750b4f62731 100644 --- a/drivers/tty/serial/max3107.c +++ b/drivers/tty/serial/max3107.c @@ -833,7 +833,7 @@ static int max3107_startup(struct uart_port *port) struct max3107_port *s = container_of(port, struct max3107_port, port); /* Initialize work queue */ - s->workqueue = create_freezeable_workqueue("max3107"); + s->workqueue = create_freezable_workqueue("max3107"); if (!s->workqueue) { dev_err(&s->spi->dev, "Workqueue creation failed\n"); return -EBUSY; -- cgit v1.2.3 From 27aadb615a2d767d629966e88dc7212ceb7c712e Mon Sep 17 00:00:00 2001 From: Ken Kawasaki Date: Sun, 20 Feb 2011 05:07:20 +0000 Subject: fmvj18x_cs: add new id fmvj18x_cs:add new id Toshiba lan&modem multifuction card (model name:IPC5010A) Signed-off-by: Ken Kawasaki Signed-off-by: David S. Miller --- drivers/tty/serial/serial_cs.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/serial_cs.c b/drivers/tty/serial/serial_cs.c index 93760b2ea17..1ef4df9bf7e 100644 --- a/drivers/tty/serial/serial_cs.c +++ b/drivers/tty/serial/serial_cs.c @@ -712,6 +712,7 @@ static struct pcmcia_device_id serial_ids[] = { PCMCIA_PFC_DEVICE_PROD_ID12(1, "Xircom", "CreditCard Ethernet+Modem II", 0x2e3ee845, 0xeca401bf), PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0e01), PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0a05), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0b05), PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x1101), PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0104, 0x0070), PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0101, 0x0562), -- cgit v1.2.3