From dcc42f483d6808ba4d04af9da35e7e47b711f6c2 Mon Sep 17 00:00:00 2001 From: Sonny Rao Date: Wed, 2 Aug 2006 00:20:09 -0400 Subject: [POWERPC] fix PMU initialization on pseries lpar We should not be calling power4_enable_pmcs() in pseries_lpar_enable_pmcs(); just doing the hypercall is sufficient. Prior to 2.6.15 we did not call power4_enable_pmcs() for an lpar. power4_enable_pmcs() tries to read the hid0 register which is no longer legal for an lpar in newer Power processors. Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/pseries/setup.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index 71c634e0b87..31867a701fc 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -213,8 +213,6 @@ static void pseries_lpar_enable_pmcs(void) { unsigned long set, reset; - power4_enable_pmcs(); - set = 1UL << 63; reset = 0; plpar_hcall_norets(H_PERFMON, set, reset); -- cgit v1.2.3 From 81b73dd92b97423b8f5324a59044da478c04f4c4 Mon Sep 17 00:00:00 2001 From: Haren Myneni Date: Thu, 27 Jul 2006 14:29:00 -0700 Subject: [POWERPC] Fix might-sleep warning on removing cpus Noticing the following might_sleep warning (dump_stack()) during kdump testing when CONFIG_DEBUG_SPINLOCK_SLEEP is enabled. All secondary CPUs will be calling rtas_set_indicator with interrupts disabled to remove them from global interrupt queue. BUG: sleeping function called from invalid context at arch/powerpc/kernel/rtas.c:463 in_atomic():1, irqs_disabled():1 Call Trace: [C00000000FFFB970] [C000000000010234] .show_stack+0x68/0x1b0 (unreliable) [C00000000FFFBA10] [C000000000059354] .__might_sleep+0xd8/0xf4 [C00000000FFFBA90] [C00000000001D1BC] .rtas_busy_delay+0x20/0x5c [C00000000FFFBB20] [C00000000001D8A8] .rtas_set_indicator+0x6c/0xcc [C00000000FFFBBC0] [C000000000048BF4] .xics_teardown_cpu+0x118/0x134 [C00000000FFFBC40] [C00000000004539C] .pseries_kexec_cpu_down_xics+0x74/0x8c [C00000000FFFBCC0] [C00000000002DF08] .crash_ipi_callback+0x15c/0x188 [C00000000FFFBD50] [C0000000000296EC] .smp_message_recv+0x84/0xdc [C00000000FFFBDC0] [C000000000048E08] .xics_ipi_dispatch+0xf0/0x130 [C00000000FFFBE50] [C00000000009EF10] .handle_IRQ_event+0x7c/0xf8 [C00000000FFFBF00] [C0000000000A0A14] .handle_percpu_irq+0x90/0x10c [C00000000FFFBF90] [C00000000002659C] .call_handle_irq+0x1c/0x2c [C00000000058B9C0] [C00000000000CA10] .do_IRQ+0xf4/0x1a4 [C00000000058BA50] [C0000000000044EC] hardware_interrupt_entry+0xc/0x10 --- Exception: 501 at .plpar_hcall_norets+0x14/0x1c LR = .pseries_dedicated_idle_sleep+0x190/0x1d4 [C00000000058BD40] [C00000000058BDE0] 0xc00000000058bde0 (unreliable) [C00000000058BDF0] [C00000000001270C] .cpu_idle+0x10c/0x1e0 [C00000000058BE70] [C000000000009274] .rest_init+0x44/0x5c To fix this issue, rtas_set_indicator_fast() is added so that will not wait for RTAS 'busy' delay and this new function is used for kdump (in xics_teardown_cpu()) and for CPU hotplug ( xics_migrate_irqs_away() and xics_setup_cpu()). Note that the platform architecture spec says that set-indicator on the indicator we're using here is not permitted to return the busy or extended busy status codes. Signed-off-by: Haren Myneni Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/rtas.c | 21 +++++++++++++++++++++ arch/powerpc/platforms/pseries/xics.c | 6 +++--- 2 files changed, 24 insertions(+), 3 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c index 4a4cb559840..77f1e06d208 100644 --- a/arch/powerpc/kernel/rtas.c +++ b/arch/powerpc/kernel/rtas.c @@ -569,6 +569,27 @@ int rtas_set_indicator(int indicator, int index, int new_value) } EXPORT_SYMBOL(rtas_set_indicator); +/* + * Ignoring RTAS extended delay + */ +int rtas_set_indicator_fast(int indicator, int index, int new_value) +{ + int rc; + int token = rtas_token("set-indicator"); + + if (token == RTAS_UNKNOWN_SERVICE) + return -ENOENT; + + rc = rtas_call(token, 3, 1, NULL, indicator, index, new_value); + + WARN_ON(rc == -2 || (rc >= 9900 && rc <= 9905)); + + if (rc < 0) + return rtas_error_rc(rc); + + return rc; +} + void rtas_restart(char *cmd) { if (rtas_flash_term_hook) diff --git a/arch/powerpc/platforms/pseries/xics.c b/arch/powerpc/platforms/pseries/xics.c index 2d0da6f9e24..e9886302572 100644 --- a/arch/powerpc/platforms/pseries/xics.c +++ b/arch/powerpc/platforms/pseries/xics.c @@ -467,7 +467,7 @@ void xics_setup_cpu(void) * * XXX: undo of teardown on kexec needs this too, as may hotplug */ - rtas_set_indicator(GLOBAL_INTERRUPT_QUEUE, + rtas_set_indicator_fast(GLOBAL_INTERRUPT_QUEUE, (1UL << interrupt_server_size) - 1 - default_distrib_server, 1); } @@ -796,7 +796,7 @@ void xics_teardown_cpu(int secondary) * so leave the master cpu in the group. */ if (secondary) - rtas_set_indicator(GLOBAL_INTERRUPT_QUEUE, + rtas_set_indicator_fast(GLOBAL_INTERRUPT_QUEUE, (1UL << interrupt_server_size) - 1 - default_distrib_server, 0); } @@ -813,7 +813,7 @@ void xics_migrate_irqs_away(void) xics_set_cpu_priority(cpu, 0); /* remove ourselves from the global interrupt queue */ - status = rtas_set_indicator(GLOBAL_INTERRUPT_QUEUE, + status = rtas_set_indicator_fast(GLOBAL_INTERRUPT_QUEUE, (1UL << interrupt_server_size) - 1 - default_distrib_server, 0); WARN_ON(status < 0); -- cgit v1.2.3 From 012c437d03cb299814e58ac8d574f7510f5989a5 Mon Sep 17 00:00:00 2001 From: Horms Date: Sun, 13 Aug 2006 23:24:22 -0700 Subject: [PATCH] Change panic_on_oops message to "Fatal exception" Previously the message was "Fatal exception: panic_on_oops", as introduced in a recent patch whith removed a somewhat dangerous call to ssleep() in the panic_on_oops path. However, Paul Mackerras suggested that this was somewhat confusing, leadind people to believe that it was panic_on_oops that was the root cause of the fatal exception. On his suggestion, this patch changes the message to simply "Fatal exception". A suitable oops message should already have been displayed. Signed-off-by: Simon Horman Cc: Paul Mackerras Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- arch/powerpc/kernel/traps.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c index 2105767fcc5..05682a24b21 100644 --- a/arch/powerpc/kernel/traps.c +++ b/arch/powerpc/kernel/traps.c @@ -151,7 +151,7 @@ int die(const char *str, struct pt_regs *regs, long err) panic("Fatal exception in interrupt"); if (panic_on_oops) - panic("Fatal exception: panic_on_oops"); + panic("Fatal exception"); do_exit(err); -- cgit v1.2.3 From eac8392f9591b359847b8a6abb75ca60967bcecd Mon Sep 17 00:00:00 2001 From: David Wilder Date: Thu, 29 Jun 2006 15:17:30 -0700 Subject: [POWERPC] Make secondary CPUs call into kdump on reset exception In the case of a system hang, the user will invoke soft-reset to initiate the kdump boot. If xmon is enabled, the CPU(s) enter into the xmon debugger. Unfortunately, the secondary CPU(s) will return to the hung state when they exit from the debugger (returned from die() -> system_reset_exception()). This causes a problem in kdump since the hung CPU(s) will not respond to the IPI sent from kdump. This patch fixes the issue by calling crash_kexec_secondary() directly from system_reset_exception() without returning to the previous state. These secondary CPUs wait 5ms until the kdump boot is started by the primary CPU. In the case we exited from the debugger to "recover" (command 'x' in xmon) the primary and the secondary CPUs will all return from die() -> system_reset_exception() ->crash_kexec_secondary() wait 5ms, then return to the previous state. A kdump boot is not started in this case. Signed-off-by: Haren Myneni Signed-off-by: David Wilder Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/traps.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c index 2105767fcc5..5147175f921 100644 --- a/arch/powerpc/kernel/traps.c +++ b/arch/powerpc/kernel/traps.c @@ -211,6 +211,19 @@ void system_reset_exception(struct pt_regs *regs) die("System Reset", regs, SIGABRT); + /* + * Some CPUs when released from the debugger will execute this path. + * These CPUs entered the debugger via a soft-reset. If the CPU was + * hung before entering the debugger it will return to the hung + * state when exiting this function. This causes a problem in + * kdump since the hung CPU(s) will not respond to the IPI sent + * from kdump. To prevent the problem we call crash_kexec_secondary() + * here. If a kdump had not been initiated or we exit the debugger + * with the "exit and recover" command (x) crash_kexec_secondary() + * will return after 5ms and the CPU returns to its previous state. + */ + crash_kexec_secondary(regs); + /* Must die if the interrupt is not recoverable */ if (!(regs->msr & MSR_RI)) panic("Unrecoverable System Reset"); -- cgit v1.2.3 From 90bdde362cc506173c1d18b8f516b18e5b228e96 Mon Sep 17 00:00:00 2001 From: Will Schmidt Date: Tue, 8 Aug 2006 09:40:00 -0500 Subject: [POWERPC] update {g5,iseries,pseries}_defconfigs Updating the defconfigs for iseries, pseries, and G5. Sticking with the defaults, with the following exceptions: I've turned off HW_RANDOM for all three configs. For G5, I've enabled SND_AOA and friends as modules; this includes the FABRIC_LAYOUT, ONYX, TAS, TOONIE and SOUNDBUS* config options. Signed-off-by: Will Schmidt Signed-off-by: Paul Mackerras --- arch/powerpc/configs/g5_defconfig | 122 ++++++++++++++++++++++++++------- arch/powerpc/configs/iseries_defconfig | 78 +++++++++++++++++---- arch/powerpc/configs/pseries_defconfig | 78 ++++++++++++++++----- 3 files changed, 224 insertions(+), 54 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/configs/g5_defconfig b/arch/powerpc/configs/g5_defconfig index a45627547d0..8c6bd17c692 100644 --- a/arch/powerpc/configs/g5_defconfig +++ b/arch/powerpc/configs/g5_defconfig @@ -1,16 +1,18 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.17-rc1 -# Wed Apr 19 13:24:37 2006 +# Linux kernel version: 2.6.18-rc3 +# Tue Aug 8 09:12:29 2006 # CONFIG_PPC64=y CONFIG_64BIT=y CONFIG_PPC_MERGE=y CONFIG_MMU=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_IRQ_PER_CPU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_COMPAT=y @@ -33,6 +35,7 @@ CONFIG_PPC_STD_MMU=y CONFIG_VIRT_CPU_ACCOUNTING=y CONFIG_SMP=y CONFIG_NR_CPUS=4 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # Code maturity level options @@ -50,6 +53,7 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y @@ -67,10 +71,12 @@ CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y +CONFIG_RT_MUTEXES=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set @@ -116,12 +122,16 @@ CONFIG_PPC_PMAC=y CONFIG_PPC_PMAC64=y # CONFIG_PPC_MAPLE is not set # CONFIG_PPC_CELL is not set +# CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PPC_IBM_CELL_BLADE is not set +# CONFIG_UDBG_RTAS_CONSOLE is not set CONFIG_U3_DART=y CONFIG_MPIC=y # CONFIG_PPC_RTAS is not set # CONFIG_MMIO_NVRAM is not set CONFIG_MPIC_BROKEN_U3=y # CONFIG_PPC_MPC106 is not set +CONFIG_PPC_970_NAP=y CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_TABLE=y # CONFIG_CPU_FREQ_DEBUG is not set @@ -153,6 +163,7 @@ CONFIG_BINFMT_ELF=y CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_IOMMU_VMERGE=y # CONFIG_HOTPLUG_CPU is not set +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_KEXEC=y # CONFIG_CRASH_DUMP is not set CONFIG_IRQ_ALL_CPUS=y @@ -168,6 +179,7 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_RESOURCES_64BIT=y # CONFIG_PPC_64K_PAGES is not set # CONFIG_SCHED_SMT is not set CONFIG_PROC_DEVICETREE=y @@ -184,6 +196,7 @@ CONFIG_GENERIC_ISA_DMA=y # CONFIG_PPC_INDIRECT_PCI is not set CONFIG_PCI=y CONFIG_PCI_DOMAINS=y +# CONFIG_PCIEPORTBUS is not set # CONFIG_PCI_DEBUG is not set # @@ -227,6 +240,8 @@ CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m CONFIG_INET_XFRM_TUNNEL=m CONFIG_INET_TUNNEL=y +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -239,6 +254,7 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set @@ -263,6 +279,7 @@ CONFIG_IP_NF_TFTP=m CONFIG_IP_NF_AMANDA=m # CONFIG_IP_NF_PPTP is not set # CONFIG_IP_NF_H323 is not set +# CONFIG_IP_NF_SIP is not set CONFIG_IP_NF_QUEUE=m # @@ -318,6 +335,7 @@ CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # CONFIG_DEBUG_DRIVER is not set +# CONFIG_SYS_HYPERVISOR is not set # # Connector - unified userspace <-> kernelspace linker @@ -355,6 +373,7 @@ CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=65536 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 CONFIG_BLK_DEV_INITRD=y CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 @@ -417,7 +436,6 @@ CONFIG_IDEDMA_PCI_AUTO=y CONFIG_BLK_DEV_IDE_PMAC=y CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y CONFIG_BLK_DEV_IDEDMA_PMAC=y -# CONFIG_BLK_DEV_IDE_PMAC_BLINK is not set # CONFIG_IDE_ARM is not set CONFIG_BLK_DEV_IDEDMA=y # CONFIG_IDEDMA_IVB is not set @@ -478,6 +496,7 @@ CONFIG_SCSI_SATA_SVW=y # CONFIG_SCSI_SATA_MV is not set # CONFIG_SCSI_SATA_NV is not set # CONFIG_SCSI_PDC_ADMA is not set +# CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_SATA_QSTOR is not set # CONFIG_SCSI_SATA_PROMISE is not set # CONFIG_SCSI_SATA_SX4 is not set @@ -497,7 +516,6 @@ CONFIG_SCSI_SATA_SVW=y # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_LPFC is not set @@ -514,9 +532,7 @@ CONFIG_MD_LINEAR=y CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y CONFIG_MD_RAID10=m -CONFIG_MD_RAID5=y -# CONFIG_MD_RAID5_RESHAPE is not set -CONFIG_MD_RAID6=m +# CONFIG_MD_RAID456 is not set CONFIG_MD_MULTIPATH=m CONFIG_MD_FAULTY=m CONFIG_BLK_DEV_DM=y @@ -559,7 +575,6 @@ CONFIG_IEEE1394_OHCI1394=y # CONFIG_IEEE1394_VIDEO1394=m CONFIG_IEEE1394_SBP2=m -# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set CONFIG_IEEE1394_ETH1394=m CONFIG_IEEE1394_DV1394=m CONFIG_IEEE1394_RAWIO=y @@ -573,6 +588,7 @@ CONFIG_IEEE1394_RAWIO=y # Macintosh device drivers # CONFIG_ADB_PMU=y +# CONFIG_ADB_PMU_LED is not set CONFIG_PMAC_SMU=y CONFIG_THERM_PM72=y CONFIG_WINDFARM=y @@ -643,6 +659,7 @@ CONFIG_TIGON3=y # CONFIG_CHELSIO_T1 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_MYRI10GE is not set # # Token Ring devices @@ -739,6 +756,7 @@ CONFIG_SERIO=y CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set # CONFIG_SERIAL_NONSTANDARD is not set # @@ -754,6 +772,7 @@ CONFIG_HW_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_BRIQ_PANEL is not set # # IPMI @@ -764,6 +783,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # Watchdog Cards # # CONFIG_WATCHDOG is not set +# CONFIG_HW_RANDOM is not set CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set # CONFIG_DTLK is not set @@ -774,6 +794,7 @@ CONFIG_GEN_RTC=y # Ftape, the floppy tape device driver # CONFIG_AGP=m +# CONFIG_AGP_SIS is not set # CONFIG_AGP_VIA is not set CONFIG_AGP_UNINORTH=m # CONFIG_DRM is not set @@ -813,6 +834,7 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_PIIX4 is not set CONFIG_I2C_POWERMAC=y # CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_OCORES is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set @@ -849,7 +871,6 @@ CONFIG_I2C_POWERMAC=y # # Dallas's 1-wire bus # -# CONFIG_W1 is not set # # Hardware Monitoring support @@ -865,6 +886,7 @@ CONFIG_I2C_POWERMAC=y # Multimedia devices # # CONFIG_VIDEO_DEV is not set +CONFIG_VIDEO_V4L2=y # # Digital Video Broadcasting Devices @@ -875,22 +897,19 @@ CONFIG_I2C_POWERMAC=y # # Graphics support # +CONFIG_FIRMWARE_EDID=y CONFIG_FB=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y CONFIG_FB_MACMODES=y -CONFIG_FB_FIRMWARE_EDID=y +# CONFIG_FB_BACKLIGHT is not set CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y # CONFIG_FB_CIRRUS is not set # CONFIG_FB_PM2 is not set # CONFIG_FB_CYBER2000 is not set CONFIG_FB_OF=y -# CONFIG_FB_CONTROL is not set -# CONFIG_FB_PLATINUM is not set -# CONFIG_FB_VALKYRIE is not set -# CONFIG_FB_CT65550 is not set # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set # CONFIG_FB_VGA16 is not set @@ -990,6 +1009,18 @@ CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_CMIPCI is not set # CONFIG_SND_CS4281 is not set # CONFIG_SND_CS46XX is not set +# CONFIG_SND_DARLA20 is not set +# CONFIG_SND_GINA20 is not set +# CONFIG_SND_LAYLA20 is not set +# CONFIG_SND_DARLA24 is not set +# CONFIG_SND_GINA24 is not set +# CONFIG_SND_LAYLA24 is not set +# CONFIG_SND_MONA is not set +# CONFIG_SND_MIA is not set +# CONFIG_SND_ECHO3G is not set +# CONFIG_SND_INDIGO is not set +# CONFIG_SND_INDIGOIO is not set +# CONFIG_SND_INDIGODJ is not set # CONFIG_SND_EMU10K1 is not set # CONFIG_SND_EMU10K1X is not set # CONFIG_SND_ENS1370 is not set @@ -1026,6 +1057,17 @@ CONFIG_SND_VERBOSE_PROCFS=y CONFIG_SND_POWERMAC=m CONFIG_SND_POWERMAC_AUTO_DRC=y +# +# Apple Onboard Audio driver +# +CONFIG_SND_AOA=m +CONFIG_SND_AOA_FABRIC_LAYOUT=m +CONFIG_SND_AOA_ONYX=m +CONFIG_SND_AOA_TAS=m +CONFIG_SND_AOA_TOONIE=m +CONFIG_SND_AOA_SOUNDBUS=m +CONFIG_SND_AOA_SOUNDBUS_I2S=m + # # USB devices # @@ -1060,6 +1102,7 @@ CONFIG_USB_DEVICEFS=y CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_BIG_ENDIAN is not set @@ -1110,9 +1153,7 @@ CONFIG_USB_HIDDEV=y # CONFIG_USB_ACECAD is not set # CONFIG_USB_KBTAB is not set # CONFIG_USB_POWERMATE is not set -# CONFIG_USB_MTOUCH is not set -# CONFIG_USB_ITMTOUCH is not set -# CONFIG_USB_EGALAX is not set +# CONFIG_USB_TOUCHSCREEN is not set # CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set @@ -1155,6 +1196,7 @@ CONFIG_USB_SERIAL=m CONFIG_USB_SERIAL_GENERIC=y # CONFIG_USB_SERIAL_AIRPRIME is not set # CONFIG_USB_SERIAL_ANYDATA is not set +# CONFIG_USB_SERIAL_ARK3116 is not set CONFIG_USB_SERIAL_BELKIN=m # CONFIG_USB_SERIAL_WHITEHEAT is not set CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m @@ -1162,6 +1204,7 @@ CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m CONFIG_USB_SERIAL_CYPRESS_M8=m CONFIG_USB_SERIAL_EMPEG=m CONFIG_USB_SERIAL_FTDI_SIO=m +# CONFIG_USB_SERIAL_FUNSOFT is not set CONFIG_USB_SERIAL_VISOR=m CONFIG_USB_SERIAL_IPAQ=m CONFIG_USB_SERIAL_IR=m @@ -1191,9 +1234,11 @@ CONFIG_USB_SERIAL_PL2303=m # CONFIG_USB_SERIAL_HP4X is not set CONFIG_USB_SERIAL_SAFE=m CONFIG_USB_SERIAL_SAFE_PADDED=y +# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set CONFIG_USB_SERIAL_TI=m CONFIG_USB_SERIAL_CYBERJACK=m CONFIG_USB_SERIAL_XIRCOM=m +# CONFIG_USB_SERIAL_OPTION is not set CONFIG_USB_SERIAL_OMNINET=m CONFIG_USB_EZUSB=y @@ -1207,10 +1252,12 @@ CONFIG_USB_EZUSB=y # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set # CONFIG_USB_PHIDGETKIT is not set # CONFIG_USB_PHIDGETSERVO is not set # CONFIG_USB_IDMOUSE is not set +CONFIG_USB_APPLEDISPLAY=m # CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_LD is not set # CONFIG_USB_TEST is not set @@ -1234,6 +1281,14 @@ CONFIG_USB_EZUSB=y # # CONFIG_NEW_LEDS is not set +# +# LED drivers +# + +# +# LED Triggers +# + # # InfiniBand support # @@ -1248,6 +1303,19 @@ CONFIG_USB_EZUSB=y # # CONFIG_RTC_CLASS is not set +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + # # File systems # @@ -1273,7 +1341,6 @@ CONFIG_REISERFS_FS_SECURITY=y # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y CONFIG_XFS_FS=m -CONFIG_XFS_EXPORT=y # CONFIG_XFS_QUOTA is not set CONFIG_XFS_SECURITY=y CONFIG_XFS_POSIX_ACL=y @@ -1282,6 +1349,7 @@ CONFIG_XFS_POSIX_ACL=y # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y CONFIG_AUTOFS_FS=m @@ -1363,7 +1431,9 @@ CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_SMB_FS is not set CONFIG_CIFS=m # CONFIG_CIFS_STATS is not set +# CONFIG_CIFS_WEAK_PW_HASH is not set # CONFIG_CIFS_XATTR is not set +# CONFIG_CIFS_DEBUG2 is not set # CONFIG_CIFS_EXPERIMENTAL is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set @@ -1444,6 +1514,9 @@ CONFIG_CRC32=y CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_PLIST=y # # Instrumentation Support @@ -1457,14 +1530,19 @@ CONFIG_OPROFILE=y # # CONFIG_PRINTK_TIME is not set CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=17 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set -CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_RWSEMS is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set CONFIG_DEBUG_FS=y @@ -1476,11 +1554,7 @@ CONFIG_FORCED_INLINING=y # CONFIG_DEBUGGER is not set CONFIG_IRQSTACKS=y CONFIG_BOOTX_TEXT=y -# CONFIG_PPC_EARLY_DEBUG_LPAR is not set -# CONFIG_PPC_EARLY_DEBUG_G5 is not set -# CONFIG_PPC_EARLY_DEBUG_RTAS is not set -# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set -# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set +# CONFIG_PPC_EARLY_DEBUG is not set # # Security options diff --git a/arch/powerpc/configs/iseries_defconfig b/arch/powerpc/configs/iseries_defconfig index a95e455a194..72ed95b3ead 100644 --- a/arch/powerpc/configs/iseries_defconfig +++ b/arch/powerpc/configs/iseries_defconfig @@ -1,16 +1,18 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.17-rc1 -# Wed Apr 19 11:46:44 2006 +# Linux kernel version: 2.6.18-rc3 +# Tue Aug 8 09:15:46 2006 # CONFIG_PPC64=y CONFIG_64BIT=y CONFIG_PPC_MERGE=y CONFIG_MMU=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_IRQ_PER_CPU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_COMPAT=y @@ -34,6 +36,7 @@ CONFIG_PPC_STD_MMU=y CONFIG_VIRT_CPU_ACCOUNTING=y CONFIG_SMP=y CONFIG_NR_CPUS=32 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # Code maturity level options @@ -51,6 +54,7 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set CONFIG_SYSCTL=y CONFIG_AUDIT=y CONFIG_AUDITSYSCALL=y @@ -69,10 +73,12 @@ CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y +CONFIG_RT_MUTEXES=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set @@ -113,10 +119,14 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_PPC_ISERIES=y # CONFIG_EMBEDDED6xx is not set # CONFIG_APUS is not set +# CONFIG_PPC_CELL is not set +# CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_UDBG_RTAS_CONSOLE is not set # CONFIG_PPC_RTAS is not set # CONFIG_MMIO_NVRAM is not set CONFIG_IBMVIO=y # CONFIG_PPC_MPC106 is not set +# CONFIG_PPC_970_NAP is not set # CONFIG_CPU_FREQ is not set # CONFIG_WANT_EARLY_SERIAL is not set @@ -135,6 +145,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_IOMMU_VMERGE=y +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_IRQ_ALL_CPUS=y CONFIG_LPARCFG=y # CONFIG_NUMA is not set @@ -149,6 +160,7 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_RESOURCES_64BIT=y # CONFIG_PPC_64K_PAGES is not set # CONFIG_SCHED_SMT is not set CONFIG_PROC_DEVICETREE=y @@ -164,6 +176,7 @@ CONFIG_GENERIC_ISA_DMA=y # CONFIG_PPC_INDIRECT_PCI is not set CONFIG_PCI=y CONFIG_PCI_DOMAINS=y +# CONFIG_PCIEPORTBUS is not set # CONFIG_PCI_DEBUG is not set # @@ -207,6 +220,8 @@ CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m CONFIG_INET_XFRM_TUNNEL=m CONFIG_INET_TUNNEL=y +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -219,6 +234,7 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set @@ -246,9 +262,11 @@ CONFIG_NETFILTER_XT_MATCH_MARK=m # CONFIG_NETFILTER_XT_MATCH_POLICY is not set # CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m +# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set CONFIG_NETFILTER_XT_MATCH_REALM=m CONFIG_NETFILTER_XT_MATCH_SCTP=m CONFIG_NETFILTER_XT_MATCH_STATE=m +# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m @@ -267,6 +285,7 @@ CONFIG_IP_NF_TFTP=m CONFIG_IP_NF_AMANDA=m # CONFIG_IP_NF_PPTP is not set # CONFIG_IP_NF_H323 is not set +# CONFIG_IP_NF_SIP is not set CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m CONFIG_IP_NF_MATCH_IPRANGE=m @@ -360,6 +379,7 @@ CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=m # CONFIG_DEBUG_DRIVER is not set +# CONFIG_SYS_HYPERVISOR is not set # # Connector - unified userspace <-> kernelspace linker @@ -396,6 +416,7 @@ CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=65536 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set @@ -453,6 +474,7 @@ CONFIG_SCSI_FC_ATTRS=y # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_SATA is not set +# CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set @@ -464,7 +486,6 @@ CONFIG_SCSI_IBMVSCSI=m # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_LPFC is not set @@ -481,9 +502,7 @@ CONFIG_MD_LINEAR=y CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y CONFIG_MD_RAID10=m -CONFIG_MD_RAID5=y -# CONFIG_MD_RAID5_RESHAPE is not set -CONFIG_MD_RAID6=m +# CONFIG_MD_RAID456 is not set CONFIG_MD_MULTIPATH=m CONFIG_MD_FAULTY=m CONFIG_BLK_DEV_DM=y @@ -596,6 +615,7 @@ CONFIG_E1000=m # CONFIG_CHELSIO_T1 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_MYRI10GE is not set # # Token Ring devices @@ -696,6 +716,7 @@ CONFIG_SERIAL_ICOM=m CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_BRIQ_PANEL is not set # # IPMI @@ -706,6 +727,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # Watchdog Cards # # CONFIG_WATCHDOG is not set +# CONFIG_HW_RANDOM is not set CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set # CONFIG_DTLK is not set @@ -741,7 +763,6 @@ CONFIG_MAX_RAW_DEVS=256 # # Dallas's 1-wire bus # -# CONFIG_W1 is not set # # Hardware Monitoring support @@ -757,6 +778,7 @@ CONFIG_MAX_RAW_DEVS=256 # Multimedia devices # # CONFIG_VIDEO_DEV is not set +CONFIG_VIDEO_V4L2=y # # Digital Video Broadcasting Devices @@ -766,7 +788,9 @@ CONFIG_MAX_RAW_DEVS=256 # # Graphics support # +CONFIG_FIRMWARE_EDID=y # CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -800,6 +824,14 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # CONFIG_NEW_LEDS is not set +# +# LED drivers +# + +# +# LED Triggers +# + # # InfiniBand support # @@ -814,6 +846,19 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # CONFIG_RTC_CLASS is not set +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + # # File systems # @@ -843,7 +888,6 @@ CONFIG_JFS_SECURITY=y # CONFIG_JFS_STATISTICS is not set CONFIG_FS_POSIX_ACL=y CONFIG_XFS_FS=m -CONFIG_XFS_EXPORT=y # CONFIG_XFS_QUOTA is not set CONFIG_XFS_SECURITY=y CONFIG_XFS_POSIX_ACL=y @@ -852,6 +896,7 @@ CONFIG_XFS_POSIX_ACL=y # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y CONFIG_AUTOFS_FS=m @@ -933,8 +978,10 @@ CONFIG_RPCSEC_GSS_SPKM3=m # CONFIG_SMB_FS is not set CONFIG_CIFS=m # CONFIG_CIFS_STATS is not set +# CONFIG_CIFS_WEAK_PW_HASH is not set CONFIG_CIFS_XATTR=y CONFIG_CIFS_POSIX=y +# CONFIG_CIFS_DEBUG2 is not set # CONFIG_CIFS_EXPERIMENTAL is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set @@ -1013,10 +1060,12 @@ CONFIG_TEXTSEARCH=y CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m +CONFIG_PLIST=y # # Instrumentation Support # +# CONFIG_PROFILING is not set # CONFIG_KPROBES is not set # @@ -1024,14 +1073,19 @@ CONFIG_TEXTSEARCH_FSM=m # # CONFIG_PRINTK_TIME is not set CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=17 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_RWSEMS is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set CONFIG_DEBUG_FS=y @@ -1042,11 +1096,7 @@ CONFIG_DEBUG_STACKOVERFLOW=y CONFIG_DEBUG_STACK_USAGE=y # CONFIG_DEBUGGER is not set CONFIG_IRQSTACKS=y -# CONFIG_PPC_EARLY_DEBUG_LPAR is not set -# CONFIG_PPC_EARLY_DEBUG_G5 is not set -# CONFIG_PPC_EARLY_DEBUG_RTAS is not set -# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set -# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set +# CONFIG_PPC_EARLY_DEBUG is not set # # Security options diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig index 31708ad4574..c18e8600d78 100644 --- a/arch/powerpc/configs/pseries_defconfig +++ b/arch/powerpc/configs/pseries_defconfig @@ -1,13 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.17-rc4 -# Sun May 28 07:26:56 2006 +# Linux kernel version: 2.6.18-rc3 +# Tue Aug 8 09:14:48 2006 # CONFIG_PPC64=y CONFIG_64BIT=y CONFIG_PPC_MERGE=y CONFIG_MMU=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_IRQ_PER_CPU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y @@ -35,6 +36,7 @@ CONFIG_PPC_STD_MMU=y CONFIG_VIRT_CPU_ACCOUNTING=y CONFIG_SMP=y CONFIG_NR_CPUS=128 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # Code maturity level options @@ -52,6 +54,7 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set CONFIG_SYSCTL=y CONFIG_AUDIT=y CONFIG_AUDITSYSCALL=y @@ -70,10 +73,12 @@ CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y +CONFIG_RT_MUTEXES=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set @@ -118,6 +123,9 @@ CONFIG_PPC_PSERIES=y # CONFIG_PPC_PMAC is not set # CONFIG_PPC_MAPLE is not set # CONFIG_PPC_CELL is not set +# CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PPC_IBM_CELL_BLADE is not set +# CONFIG_UDBG_RTAS_CONSOLE is not set CONFIG_XICS=y # CONFIG_U3_DART is not set CONFIG_MPIC=y @@ -149,6 +157,7 @@ CONFIG_BINFMT_MISC=m CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_IOMMU_VMERGE=y CONFIG_HOTPLUG_CPU=y +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_KEXEC=y # CONFIG_CRASH_DUMP is not set CONFIG_IRQ_ALL_CPUS=y @@ -173,6 +182,7 @@ CONFIG_SPARSEMEM_EXTREME=y # CONFIG_MEMORY_HOTPLUG is not set CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y +CONFIG_RESOURCES_64BIT=y CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y # CONFIG_PPC_64K_PAGES is not set CONFIG_SCHED_SMT=y @@ -190,6 +200,7 @@ CONFIG_PPC_I8259=y # CONFIG_PPC_INDIRECT_PCI is not set CONFIG_PCI=y CONFIG_PCI_DOMAINS=y +# CONFIG_PCIEPORTBUS is not set # CONFIG_PCI_DEBUG is not set # @@ -238,6 +249,8 @@ CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m CONFIG_INET_XFRM_TUNNEL=m CONFIG_INET_TUNNEL=y +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -250,6 +263,7 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set @@ -277,6 +291,7 @@ CONFIG_IP_NF_TFTP=m CONFIG_IP_NF_AMANDA=m # CONFIG_IP_NF_PPTP is not set # CONFIG_IP_NF_H323 is not set +# CONFIG_IP_NF_SIP is not set CONFIG_IP_NF_QUEUE=m # @@ -316,6 +331,7 @@ CONFIG_LLC=y # Network testing # # CONFIG_NET_PKTGEN is not set +# CONFIG_NET_TCPPROBE is not set # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set @@ -332,6 +348,7 @@ CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # CONFIG_DEBUG_DRIVER is not set +# CONFIG_SYS_HYPERVISOR is not set # # Connector - unified userspace <-> kernelspace linker @@ -352,6 +369,7 @@ CONFIG_PARPORT_PC=m # CONFIG_PARPORT_PC_FIFO is not set # CONFIG_PARPORT_PC_SUPERIO is not set # CONFIG_PARPORT_GSC is not set +# CONFIG_PARPORT_AX88796 is not set # CONFIG_PARPORT_1284 is not set # @@ -376,6 +394,7 @@ CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=65536 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set @@ -487,6 +506,7 @@ CONFIG_SCSI_SAS_ATTRS=m # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_SATA is not set +# CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set @@ -508,12 +528,6 @@ CONFIG_SCSI_IPR_TRACE=y CONFIG_SCSI_IPR_DUMP=y # CONFIG_SCSI_QLOGIC_1280 is not set CONFIG_SCSI_QLA_FC=m -CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE=y -CONFIG_SCSI_QLA21XX=m -CONFIG_SCSI_QLA22XX=m -CONFIG_SCSI_QLA2300=m -CONFIG_SCSI_QLA2322=m -CONFIG_SCSI_QLA24XX=m CONFIG_SCSI_LPFC=m # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set @@ -528,9 +542,7 @@ CONFIG_MD_LINEAR=y CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y CONFIG_MD_RAID10=m -CONFIG_MD_RAID5=y -CONFIG_MD_RAID5_RESHAPE=y -CONFIG_MD_RAID6=m +# CONFIG_MD_RAID456 is not set CONFIG_MD_MULTIPATH=m CONFIG_MD_FAULTY=m CONFIG_BLK_DEV_DM=y @@ -651,6 +663,7 @@ CONFIG_IXGB=m # CONFIG_IXGB_NAPI is not set CONFIG_S2IO=m # CONFIG_S2IO_NAPI is not set +# CONFIG_MYRI10GE is not set # # Token Ring devices @@ -754,6 +767,7 @@ CONFIG_SERIO_LIBPS2=y CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set # CONFIG_SERIAL_NONSTANDARD is not set # @@ -776,6 +790,7 @@ CONFIG_SERIAL_JSM=m CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_BRIQ_PANEL is not set # CONFIG_PRINTER is not set # CONFIG_PPDEV is not set # CONFIG_TIPAR is not set @@ -793,6 +808,7 @@ CONFIG_HVCS=m # Watchdog Cards # # CONFIG_WATCHDOG is not set +# CONFIG_HW_RANDOM is not set CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set # CONFIG_DTLK is not set @@ -839,6 +855,7 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_I810 is not set # CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_OCORES is not set # CONFIG_I2C_PARPORT is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_PROSAVAGE is not set @@ -876,7 +893,6 @@ CONFIG_I2C_ALGOBIT=y # # Dallas's 1-wire bus # -# CONFIG_W1 is not set # # Hardware Monitoring support @@ -892,6 +908,7 @@ CONFIG_I2C_ALGOBIT=y # Multimedia devices # # CONFIG_VIDEO_DEV is not set +CONFIG_VIDEO_V4L2=y # # Digital Video Broadcasting Devices @@ -902,19 +919,19 @@ CONFIG_I2C_ALGOBIT=y # # Graphics support # +CONFIG_FIRMWARE_EDID=y CONFIG_FB=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y CONFIG_FB_MACMODES=y -CONFIG_FB_FIRMWARE_EDID=y +# CONFIG_FB_BACKLIGHT is not set CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y # CONFIG_FB_CIRRUS is not set # CONFIG_FB_PM2 is not set # CONFIG_FB_CYBER2000 is not set CONFIG_FB_OF=y -# CONFIG_FB_CT65550 is not set # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set # CONFIG_FB_VGA16 is not set @@ -993,6 +1010,7 @@ CONFIG_USB_DEVICEFS=y CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_BIG_ENDIAN is not set @@ -1083,10 +1101,12 @@ CONFIG_USB_MON=y # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set # CONFIG_USB_PHIDGETKIT is not set # CONFIG_USB_PHIDGETSERVO is not set # CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_LD is not set # CONFIG_USB_TEST is not set @@ -1124,12 +1144,14 @@ CONFIG_USB_MON=y CONFIG_INFINIBAND=m CONFIG_INFINIBAND_USER_MAD=m CONFIG_INFINIBAND_USER_ACCESS=m +CONFIG_INFINIBAND_ADDR_TRANS=y CONFIG_INFINIBAND_MTHCA=m CONFIG_INFINIBAND_MTHCA_DEBUG=y CONFIG_INFINIBAND_IPOIB=m CONFIG_INFINIBAND_IPOIB_DEBUG=y # CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set CONFIG_INFINIBAND_SRP=m +# CONFIG_INFINIBAND_ISER is not set # # EDAC - error detection and reporting (RAS) (EXPERIMENTAL) @@ -1140,6 +1162,19 @@ CONFIG_INFINIBAND_SRP=m # # CONFIG_RTC_CLASS is not set +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + # # File systems # @@ -1169,15 +1204,16 @@ CONFIG_JFS_SECURITY=y # CONFIG_JFS_STATISTICS is not set CONFIG_FS_POSIX_ACL=y CONFIG_XFS_FS=m -CONFIG_XFS_EXPORT=y # CONFIG_XFS_QUOTA is not set CONFIG_XFS_SECURITY=y CONFIG_XFS_POSIX_ACL=y # CONFIG_XFS_RT is not set CONFIG_OCFS2_FS=m +CONFIG_OCFS2_DEBUG_MASKLOG=y # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set @@ -1259,8 +1295,10 @@ CONFIG_RPCSEC_GSS_SPKM3=m # CONFIG_SMB_FS is not set CONFIG_CIFS=m # CONFIG_CIFS_STATS is not set +# CONFIG_CIFS_WEAK_PW_HASH is not set CONFIG_CIFS_XATTR=y CONFIG_CIFS_POSIX=y +# CONFIG_CIFS_DEBUG2 is not set # CONFIG_CIFS_EXPERIMENTAL is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set @@ -1326,6 +1364,9 @@ CONFIG_CRC32=y CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_PLIST=y # # Instrumentation Support @@ -1339,14 +1380,19 @@ CONFIG_KPROBES=y # # CONFIG_PRINTK_TIME is not set CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=17 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_RWSEMS is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set CONFIG_DEBUG_FS=y -- cgit v1.2.3 From 47585d8f5dea10dea49c948f1fb13ef7632409c7 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Wed, 5 Jul 2006 14:39:42 +1000 Subject: [POWERPC] Move some kexec logic into machine_kexec.c We're missing a few functions for kexec to compile on 32-bit. There's nothing really 64-bit specific about the 64-bit versions, so make them generic rather than adding empty definitions for 32-bit. Signed-off-by: Michael Ellerman Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/machine_kexec.c | 56 ++++++++++++++++++++++++++++++++++ arch/powerpc/kernel/machine_kexec_64.c | 56 ---------------------------------- 2 files changed, 56 insertions(+), 56 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/machine_kexec.c b/arch/powerpc/kernel/machine_kexec.c index a81ca1b841e..e60a0c544d6 100644 --- a/arch/powerpc/kernel/machine_kexec.c +++ b/arch/powerpc/kernel/machine_kexec.c @@ -13,6 +13,7 @@ #include #include #include +#include void machine_crash_shutdown(struct pt_regs *regs) { @@ -59,3 +60,58 @@ NORET_TYPE void machine_kexec(struct kimage *image) } for(;;); } + +static int __init early_parse_crashk(char *p) +{ + unsigned long size; + + if (!p) + return 1; + + size = memparse(p, &p); + + if (*p == '@') + crashk_res.start = memparse(p + 1, &p); + else + crashk_res.start = KDUMP_KERNELBASE; + + crashk_res.end = crashk_res.start + size - 1; + + return 0; +} +early_param("crashkernel", early_parse_crashk); + +void __init reserve_crashkernel(void) +{ + unsigned long size; + + if (crashk_res.start == 0) + return; + + /* We might have got these values via the command line or the + * device tree, either way sanitise them now. */ + + size = crashk_res.end - crashk_res.start + 1; + + if (crashk_res.start != KDUMP_KERNELBASE) + printk("Crash kernel location must be 0x%x\n", + KDUMP_KERNELBASE); + + crashk_res.start = KDUMP_KERNELBASE; + size = PAGE_ALIGN(size); + crashk_res.end = crashk_res.start + size - 1; + + /* Crash kernel trumps memory limit */ + if (memory_limit && memory_limit <= crashk_res.end) { + memory_limit = crashk_res.end + 1; + printk("Adjusted memory limit for crashkernel, now 0x%lx\n", + memory_limit); + } + + lmb_reserve(crashk_res.start, size); +} + +int overlaps_crashkernel(unsigned long start, unsigned long size) +{ + return (start + size) > crashk_res.start && start <= crashk_res.end; +} diff --git a/arch/powerpc/kernel/machine_kexec_64.c b/arch/powerpc/kernel/machine_kexec_64.c index b438d45a068..b6db19d6143 100644 --- a/arch/powerpc/kernel/machine_kexec_64.c +++ b/arch/powerpc/kernel/machine_kexec_64.c @@ -21,7 +21,6 @@ #include #include #include -#include #include #include /* _end */ #include @@ -385,58 +384,3 @@ static int __init kexec_setup(void) return 0; } __initcall(kexec_setup); - -static int __init early_parse_crashk(char *p) -{ - unsigned long size; - - if (!p) - return 1; - - size = memparse(p, &p); - - if (*p == '@') - crashk_res.start = memparse(p + 1, &p); - else - crashk_res.start = KDUMP_KERNELBASE; - - crashk_res.end = crashk_res.start + size - 1; - - return 0; -} -early_param("crashkernel", early_parse_crashk); - -void __init reserve_crashkernel(void) -{ - unsigned long size; - - if (crashk_res.start == 0) - return; - - /* We might have got these values via the command line or the - * device tree, either way sanitise them now. */ - - size = crashk_res.end - crashk_res.start + 1; - - if (crashk_res.start != KDUMP_KERNELBASE) - printk("Crash kernel location must be 0x%x\n", - KDUMP_KERNELBASE); - - crashk_res.start = KDUMP_KERNELBASE; - size = PAGE_ALIGN(size); - crashk_res.end = crashk_res.start + size - 1; - - /* Crash kernel trumps memory limit */ - if (memory_limit && memory_limit <= crashk_res.end) { - memory_limit = crashk_res.end + 1; - printk("Adjusted memory limit for crashkernel, now 0x%lx\n", - memory_limit); - } - - lmb_reserve(crashk_res.start, size); -} - -int overlaps_crashkernel(unsigned long start, unsigned long size) -{ - return (start + size) > crashk_res.start && start <= crashk_res.end; -} -- cgit v1.2.3 From b6f35b4966e0ae59cec45e5292b100698d12dc5f Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Wed, 5 Jul 2006 14:39:43 +1000 Subject: [POWERPC] Make crash.c work on 32-bit and 64-bit To compile kexec on 32-bit we need a few more bits and pieces. Rather than add empty definitions, we can make crash.c work on 32-bit, with only a couple of kludges. Signed-off-by: Michael Ellerman Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/Makefile | 4 ++-- arch/powerpc/kernel/crash.c | 11 +++++++++++ arch/powerpc/kernel/machine_kexec_64.c | 1 - arch/powerpc/kernel/traps.c | 3 --- 4 files changed, 13 insertions(+), 6 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index 814f242aeb8..956c2e5564b 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -67,9 +67,9 @@ pci64-$(CONFIG_PPC64) += pci_64.o pci_dn.o pci_iommu.o \ pci_direct_iommu.o iomap.o pci32-$(CONFIG_PPC32) := pci_32.o obj-$(CONFIG_PCI) += $(pci64-y) $(pci32-y) -kexec-$(CONFIG_PPC64) := machine_kexec_64.o crash.o +kexec-$(CONFIG_PPC64) := machine_kexec_64.o kexec-$(CONFIG_PPC32) := machine_kexec_32.o -obj-$(CONFIG_KEXEC) += machine_kexec.o $(kexec-y) +obj-$(CONFIG_KEXEC) += machine_kexec.o crash.o $(kexec-y) ifeq ($(CONFIG_PPC_ISERIES),y) $(obj)/head_64.o: $(obj)/lparmap.s diff --git a/arch/powerpc/kernel/crash.c b/arch/powerpc/kernel/crash.c index 358cecdc6ae..f04c18e08b8 100644 --- a/arch/powerpc/kernel/crash.c +++ b/arch/powerpc/kernel/crash.c @@ -44,6 +44,7 @@ /* This keeps a track of which one is crashing cpu. */ int crashing_cpu = -1; static cpumask_t cpus_in_crash = CPU_MASK_NONE; +cpumask_t cpus_in_sr = CPU_MASK_NONE; static u32 *append_elf_note(u32 *buf, char *name, unsigned type, void *data, size_t data_len) @@ -139,7 +140,13 @@ void crash_ipi_callback(struct pt_regs *regs) if (ppc_md.kexec_cpu_down) ppc_md.kexec_cpu_down(1, 1); + +#ifdef CONFIG_PPC64 kexec_smp_wait(); +#else + for (;;); /* FIXME */ +#endif + /* NOTREACHED */ } @@ -255,7 +262,11 @@ static void crash_kexec_prepare_cpus(int cpu) * * do this if kexec in setup.c ? */ +#ifdef CONFIG_PPC64 smp_release_cpus(); +#else + /* FIXME */ +#endif } void crash_kexec_secondary(struct pt_regs *regs) diff --git a/arch/powerpc/kernel/machine_kexec_64.c b/arch/powerpc/kernel/machine_kexec_64.c index b6db19d6143..be58985c768 100644 --- a/arch/powerpc/kernel/machine_kexec_64.c +++ b/arch/powerpc/kernel/machine_kexec_64.c @@ -10,7 +10,6 @@ */ -#include #include #include #include diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c index 5147175f921..125761aaa40 100644 --- a/arch/powerpc/kernel/traps.c +++ b/arch/powerpc/kernel/traps.c @@ -55,9 +55,6 @@ #ifdef CONFIG_PPC64 /* XXX */ #define _IO_BASE pci_io_base -#ifdef CONFIG_KEXEC -cpumask_t cpus_in_sr = CPU_MASK_NONE; -#endif #endif #ifdef CONFIG_DEBUGGER -- cgit v1.2.3 From 83db3dde2604d48e30a468c82da163dd1a8602b3 Mon Sep 17 00:00:00 2001 From: Ananth N Mavinakayanahalli Date: Fri, 11 Aug 2006 17:01:34 +0530 Subject: [POWERPC] kprobes: Fix possible system crash during out-of-line single-stepping - On archs that have no-exec support, we vmalloc() a executable scratch area of PAGE_SIZE and divide it up into an array of slots of maximum instruction size for that arch - On a kprobe registration, the original instruction is copied to the first available free slot, so if multiple kprobes are registered, chances are, they get contiguous slots - On POWER4, due to not having coherent icaches, we could hit a situation where a probe that is registered on one processor, is hit immediately on another. This second processor could have fetched the stream of text from the out-of-line single-stepping area *before* the probe registration completed, possibly due to an earlier (and a different) kprobe hit and hence would see stale data at the slot. Executing such an arbitrary instruction lead to a problem as reported in LTC bugzilla 23555. The correct solution is to call flush_icache_range() as soon as the instruction is copied for out-of-line single-stepping, so the correct instruction is seen on all processors. Thanks to Will Schmidt who tracked this down. Signed-off-by: Ananth N Mavinakayanahalli Acked-by: Will Schmidt Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/kprobes.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/kprobes.c b/arch/powerpc/kernel/kprobes.c index 9f0898c8975..cd65c367b8b 100644 --- a/arch/powerpc/kernel/kprobes.c +++ b/arch/powerpc/kernel/kprobes.c @@ -61,6 +61,8 @@ int __kprobes arch_prepare_kprobe(struct kprobe *p) if (!ret) { memcpy(p->ainsn.insn, p->addr, MAX_INSN_SIZE * sizeof(kprobe_opcode_t)); p->opcode = *p->addr; + flush_icache_range((unsigned long)p->ainsn.insn, + (unsigned long)p->ainsn.insn + sizeof(kprobe_opcode_t)); } return ret; -- cgit v1.2.3 From e5c14ce118ab6a96afb2af5c4ec9727b03ab1936 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Thu, 17 Aug 2006 03:59:27 +0200 Subject: [POWERPC] Fix irq radix tree remapping typo The code for using the radix tree for reverse mapping of interrupts has a typo that causes it to create incorrect mappings if the software and hardware numbers happen to be different. This would, among others, cause the IDE interrupt to fail on js20's. This fixes it. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/irq.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c index 01bdae35cb5..7ee68543331 100644 --- a/arch/powerpc/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c @@ -693,7 +693,7 @@ unsigned int irq_radix_revmap(struct irq_host *host, /* If not there, try to insert it */ virq = irq_find_mapping(host, hwirq); if (virq != NO_IRQ) - radix_tree_insert(tree, virq, &irq_map[virq]); + radix_tree_insert(tree, hwirq, &irq_map[virq]); bail: spin_unlock_irqrestore(&irq_big_lock, flags); return virq; -- cgit v1.2.3 From 9a936a2e0526089194159eae31238e36b1c19e74 Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Sun, 6 Aug 2006 20:51:25 -0500 Subject: [POWERPC] powerpc: Clear HID0 attention enable on PPC970 at boot time Clear HID0[en_attn] at CPU init time on PPC970. Closes CVE-2006-4093. Signed-off-by: Olof Johansson Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/cpu_setup_power4.S | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/cpu_setup_power4.S b/arch/powerpc/kernel/cpu_setup_power4.S index f69af2c5d7b..76e97aa71c4 100644 --- a/arch/powerpc/kernel/cpu_setup_power4.S +++ b/arch/powerpc/kernel/cpu_setup_power4.S @@ -76,6 +76,8 @@ _GLOBAL(__setup_cpu_ppc970) mfspr r0,SPRN_HID0 li r11,5 /* clear DOZE and SLEEP */ rldimi r0,r11,52,8 /* set NAP and DPM */ + li r11,0 + rldimi r0,r11,32,31 /* clear EN_ATTN */ mtspr SPRN_HID0,r0 mfspr r0,SPRN_HID0 mfspr r0,SPRN_HID0 -- cgit v1.2.3 From f583165f6a926e9f27ff8d15c0e4b22e83f0d599 Mon Sep 17 00:00:00 2001 From: Jon Loeliger Date: Thu, 17 Aug 2006 08:42:35 -0500 Subject: [POWERPC] Convert to mac-address for ethernet MAC address data. Also accept "local-mac-address". However the old "address" is now obsolete, but accepted for backwards compatibility. It should be removed after all device trees have been converted to use "mac-address". Signed-off-by: Jon Loeliger Signed-off-by: Paul Mackerras --- arch/powerpc/sysdev/fsl_soc.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c index e983972132d..12b65609c07 100644 --- a/arch/powerpc/sysdev/fsl_soc.c +++ b/arch/powerpc/sysdev/fsl_soc.c @@ -169,8 +169,16 @@ static int __init gfar_of_init(void) goto err; } - mac_addr = get_property(np, "address", NULL); - memcpy(gfar_data.mac_addr, mac_addr, 6); + mac_addr = get_property(np, "local-mac-address", NULL); + if (mac_addr == NULL) + mac_addr = get_property(np, "mac-address", NULL); + if (mac_addr == NULL) { + /* Obsolete */ + mac_addr = get_property(np, "address", NULL); + } + + if (mac_addr) + memcpy(gfar_data.mac_addr, mac_addr, 6); if (model && !strcasecmp(model, "TSEC")) gfar_data.device_flags = -- cgit v1.2.3 From 707ba16f0ffed3b83ced3c7f4d4d332a70f8b41d Mon Sep 17 00:00:00 2001 From: Jon Loeliger Date: Thu, 3 Aug 2006 16:27:57 -0500 Subject: [POWERPC] Add MPC8641 HPCN Device Tree Source file. As per list discussion, let's add device tree source files under powerpc/boot/dts. If nothing else, it is a starting point. Signed-off-by: Jon Loeliger Signed-off-by: Paul Mackerras --- arch/powerpc/boot/dts/mpc8641_hpcn.dts | 338 +++++++++++++++++++++++++++++++++ 1 file changed, 338 insertions(+) create mode 100644 arch/powerpc/boot/dts/mpc8641_hpcn.dts (limited to 'arch/powerpc') diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn.dts b/arch/powerpc/boot/dts/mpc8641_hpcn.dts new file mode 100644 index 00000000000..e832a884d76 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8641_hpcn.dts @@ -0,0 +1,338 @@ +/* + * MPC8641 HPCN Device Tree Source + * + * Copyright 2006 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + + +/ { + model = "MPC8641HPCN"; + compatible = "mpc86xx"; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #cpus = <2>; + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8641@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <20>; // 32 bytes + i-cache-line-size = <20>; // 32 bytes + d-cache-size = <8000>; // L1, 32K + i-cache-size = <8000>; // L1, 32K + timebase-frequency = <0>; // 33 MHz, from uboot + bus-frequency = <0>; // From uboot + clock-frequency = <0>; // From uboot + 32-bit; + linux,boot-cpu; + }; + PowerPC,8641@1 { + device_type = "cpu"; + reg = <1>; + d-cache-line-size = <20>; // 32 bytes + i-cache-line-size = <20>; // 32 bytes + d-cache-size = <8000>; // L1, 32K + i-cache-size = <8000>; // L1, 32K + timebase-frequency = <0>; // 33 MHz, from uboot + bus-frequency = <0>; // From uboot + clock-frequency = <0>; // From uboot + 32-bit; + }; + }; + + memory { + device_type = "memory"; + reg = <00000000 40000000>; // 1G at 0x0 + }; + + soc8641@f8000000 { + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + device_type = "soc"; + ranges = <0 f8000000 00100000>; + reg = ; // CCSRBAR 1M + bus-frequency = <0>; + + i2c@3000 { + device_type = "i2c"; + compatible = "fsl-i2c"; + reg = <3000 100>; + interrupts = <2b 2>; + interrupt-parent = <40000>; + dfsrr; + }; + + i2c@3100 { + device_type = "i2c"; + compatible = "fsl-i2c"; + reg = <3100 100>; + interrupts = <2b 2>; + interrupt-parent = <40000>; + dfsrr; + }; + + mdio@24520 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "mdio"; + compatible = "gianfar"; + reg = <24520 20>; + linux,phandle = <24520>; + ethernet-phy@0 { + linux,phandle = <2452000>; + interrupt-parent = <40000>; + interrupts = <4a 1>; + reg = <0>; + device_type = "ethernet-phy"; + }; + ethernet-phy@1 { + linux,phandle = <2452001>; + interrupt-parent = <40000>; + interrupts = <4a 1>; + reg = <1>; + device_type = "ethernet-phy"; + }; + ethernet-phy@2 { + linux,phandle = <2452002>; + interrupt-parent = <40000>; + interrupts = <4a 1>; + reg = <2>; + device_type = "ethernet-phy"; + }; + ethernet-phy@3 { + linux,phandle = <2452003>; + interrupt-parent = <40000>; + interrupts = <4a 1>; + reg = <3>; + device_type = "ethernet-phy"; + }; + }; + + ethernet@24000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <24000 1000>; + mac-address = [ 00 E0 0C 00 73 00 ]; + interrupts = <1d 2 1e 2 22 2>; + interrupt-parent = <40000>; + phy-handle = <2452000>; + }; + + ethernet@25000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <25000 1000>; + mac-address = [ 00 E0 0C 00 73 01 ]; + interrupts = <23 2 24 2 28 2>; + interrupt-parent = <40000>; + phy-handle = <2452001>; + }; + + ethernet@26000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <26000 1000>; + mac-address = [ 00 E0 0C 00 02 FD ]; + interrupts = <1F 2 20 2 21 2>; + interrupt-parent = <40000>; + phy-handle = <2452002>; + }; + + ethernet@27000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <27000 1000>; + mac-address = [ 00 E0 0C 00 03 FD ]; + interrupts = <25 2 26 2 27 2>; + interrupt-parent = <40000>; + phy-handle = <2452003>; + }; + serial@4500 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4500 100>; + clock-frequency = <0>; + interrupts = <2a 2>; + interrupt-parent = <40000>; + }; + + serial@4600 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4600 100>; + clock-frequency = <0>; + interrupts = <1c 2>; + interrupt-parent = <40000>; + }; + + pci@8000 { + compatible = "86xx"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <8000 1000>; + bus-range = <0 fe>; + ranges = <02000000 0 80000000 80000000 0 20000000 + 01000000 0 00000000 e2000000 0 00100000>; + clock-frequency = <1fca055>; + interrupt-parent = <40000>; + interrupts = <18 2>; + interrupt-map-mask = ; + interrupt-map = < + /* IDSEL 0x11 */ + 8800 0 0 1 4d0 3 2 + 8800 0 0 2 4d0 4 2 + 8800 0 0 3 4d0 5 2 + 8800 0 0 4 4d0 6 2 + + /* IDSEL 0x12 */ + 9000 0 0 1 4d0 4 2 + 9000 0 0 2 4d0 5 2 + 9000 0 0 3 4d0 6 2 + 9000 0 0 4 4d0 3 2 + + /* IDSEL 0x13 */ + 9800 0 0 1 4d0 0 0 + 9800 0 0 2 4d0 0 0 + 9800 0 0 3 4d0 0 0 + 9800 0 0 4 4d0 0 0 + + /* IDSEL 0x14 */ + a000 0 0 1 4d0 0 0 + a000 0 0 2 4d0 0 0 + a000 0 0 3 4d0 0 0 + a000 0 0 4 4d0 0 0 + + /* IDSEL 0x15 */ + a800 0 0 1 4d0 0 0 + a800 0 0 2 4d0 0 0 + a800 0 0 3 4d0 0 0 + a800 0 0 4 4d0 0 0 + + /* IDSEL 0x16 */ + b000 0 0 1 4d0 0 0 + b000 0 0 2 4d0 0 0 + b000 0 0 3 4d0 0 0 + b000 0 0 4 4d0 0 0 + + /* IDSEL 0x17 */ + b800 0 0 1 4d0 0 0 + b800 0 0 2 4d0 0 0 + b800 0 0 3 4d0 0 0 + b800 0 0 4 4d0 0 0 + + /* IDSEL 0x18 */ + c000 0 0 1 4d0 0 0 + c000 0 0 2 4d0 0 0 + c000 0 0 3 4d0 0 0 + c000 0 0 4 4d0 0 0 + + /* IDSEL 0x19 */ + c800 0 0 1 4d0 0 0 + c800 0 0 2 4d0 0 0 + c800 0 0 3 4d0 0 0 + c800 0 0 4 4d0 0 0 + + /* IDSEL 0x1a */ + d000 0 0 1 4d0 6 2 + d000 0 0 2 4d0 3 2 + d000 0 0 3 4d0 4 2 + d000 0 0 4 4d0 5 2 + + + /* IDSEL 0x1b */ + d800 0 0 1 4d0 5 2 + d800 0 0 2 4d0 0 0 + d800 0 0 3 4d0 0 0 + d800 0 0 4 4d0 0 0 + + /* IDSEL 0x1c */ + e000 0 0 1 4d0 9 2 + e000 0 0 2 4d0 a 2 + e000 0 0 3 4d0 c 2 + e000 0 0 4 4d0 7 2 + + /* IDSEL 0x1d */ + e800 0 0 1 4d0 9 2 + e800 0 0 2 4d0 a 2 + e800 0 0 3 4d0 b 2 + e800 0 0 4 4d0 0 0 + + /* IDSEL 0x1e */ + f000 0 0 1 4d0 c 2 + f000 0 0 2 4d0 0 0 + f000 0 0 3 4d0 0 0 + f000 0 0 4 4d0 0 0 + + /* IDSEL 0x1f */ + f800 0 0 1 4d0 6 2 + f800 0 0 2 4d0 0 0 + f800 0 0 3 4d0 0 0 + f800 0 0 4 4d0 0 0 + >; + i8259@4d0 { + clock-frequency = <0>; + interrupt-controller; + device_type = "interrupt-controller"; + #address-cells = <0>; + #interrupt-cells = <2>; + built-in; + compatible = "chrp,iic"; + big-endian; + interrupts = <49 2>; + interrupt-parent = <40000>; + }; + + }; + pic@40000 { + linux,phandle = <40000>; + clock-frequency = <0>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <40000 40000>; + built-in; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + big-endian; + interrupts = < + 10 2 11 2 12 2 13 2 + 14 2 15 2 16 2 17 2 + 18 2 19 2 1a 2 1b 2 + 1c 2 1d 2 1e 2 1f 2 + 20 2 21 2 22 2 23 2 + 24 2 25 2 26 2 27 2 + 28 2 29 2 2a 2 2b 2 + 2c 2 2d 2 2e 2 2f 2 + 30 2 31 2 32 2 33 2 + 34 2 35 2 36 2 37 2 + 38 2 39 2 2a 2 3b 2 + 3c 2 3d 2 3e 2 3f 2 + 48 1 49 2 4a 1 + >; + interrupt-parent = <40000>; + }; + }; +}; -- cgit v1.2.3 From 5315862045c5dc5dfe0754fbd07df1350180628a Mon Sep 17 00:00:00 2001 From: Jon Loeliger Date: Wed, 9 Aug 2006 10:37:28 -0500 Subject: [POWERPC] Offer PCI as a CONFIG choice for PPC_86xx. Also fix 80-column run-over. Signed-off-by: Jon Loeliger Signed-off-by: Paul Mackerras --- arch/powerpc/Kconfig | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 13e583f16ed..abb325eb8f7 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -836,9 +836,10 @@ config MCA bool config PCI - bool "PCI support" if 40x || CPM2 || PPC_83xx || PPC_85xx || PPC_MPC52xx || (EMBEDDED && PPC_ISERIES) \ - || MPC7448HPC2 - default y if !40x && !CPM2 && !8xx && !APUS && !PPC_83xx && !PPC_85xx && !PPC_86xx + bool "PCI support" if 40x || CPM2 || PPC_83xx || PPC_85xx || PPC_86xx \ + || PPC_MPC52xx || (EMBEDDED && PPC_ISERIES) || MPC7448HPC2 + default y if !40x && !CPM2 && !8xx && !APUS && !PPC_83xx \ + && !PPC_85xx && !PPC_86xx default PCI_PERMEDIA if !4xx && !CPM2 && !8xx && APUS default PCI_QSPAN if !4xx && !CPM2 && 8xx help -- cgit v1.2.3 From 9e8a9bc2d2c3ac3b8542cc5c2544248df6f3f1c5 Mon Sep 17 00:00:00 2001 From: Jon Loeliger Date: Thu, 17 Aug 2006 12:24:42 -0500 Subject: [POWERPC] Fix the mpc8641_hpcn.dts file. Add 'linux,phandle' entry to i8259@4d0 node. Signed-off-by: Zhang Wei Signed-off-by: Jon Loeliger Signed-off-by: Paul Mackerras --- arch/powerpc/boot/dts/mpc8641_hpcn.dts | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn.dts b/arch/powerpc/boot/dts/mpc8641_hpcn.dts index e832a884d76..f0c7731743e 100644 --- a/arch/powerpc/boot/dts/mpc8641_hpcn.dts +++ b/arch/powerpc/boot/dts/mpc8641_hpcn.dts @@ -293,6 +293,7 @@ f800 0 0 4 4d0 0 0 >; i8259@4d0 { + linux,phandle = <4d0>; clock-frequency = <0>; interrupt-controller; device_type = "interrupt-controller"; -- cgit v1.2.3 From 4c86cd9c59428a40233fb707f5de18caa5ab5cb7 Mon Sep 17 00:00:00 2001 From: Andy Fleming Date: Fri, 18 Aug 2006 18:03:08 -0500 Subject: [POWERPC] Fix interrupts on 8540 ADS board * Fixed 8540 ADS support for the new irq layer * Fixed 8540 ADS support for mapping PCI interrupts * Updated 8540 ADS to use device tree for interrupt assignment and sense values Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/85xx/mpc85xx_ads.c | 162 ++++++++++-------------------- 1 file changed, 55 insertions(+), 107 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ads.c b/arch/powerpc/platforms/85xx/mpc85xx_ads.c index 06a497676c9..9d2acfbbecc 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_ads.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_ads.c @@ -37,79 +37,7 @@ unsigned long isa_io_base = 0; unsigned long isa_mem_base = 0; #endif -/* - * Internal interrupts are all Level Sensitive, and Positive Polarity - * - * Note: Likely, this table and the following function should be - * obtained and derived from the OF Device Tree. - */ -static u_char mpc85xx_ads_openpic_initsenses[] __initdata = { - MPC85XX_INTERNAL_IRQ_SENSES, - 0x0, /* External 0: */ -#if defined(CONFIG_PCI) - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 1: PCI slot 0 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 2: PCI slot 1 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 3: PCI slot 2 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 4: PCI slot 3 */ -#else - 0x0, /* External 1: */ - 0x0, /* External 2: */ - 0x0, /* External 3: */ - 0x0, /* External 4: */ -#endif - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 5: PHY */ - 0x0, /* External 6: */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 7: PHY */ - 0x0, /* External 8: */ - 0x0, /* External 9: */ - 0x0, /* External 10: */ - 0x0, /* External 11: */ -}; - #ifdef CONFIG_PCI -/* - * interrupt routing - */ - -int -mpc85xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) -{ - static char pci_irq_table[][4] = - /* - * This is little evil, but works around the fact - * that revA boards have IDSEL starting at 18 - * and others boards (older) start at 12 - * - * PCI IDSEL/INTPIN->INTLINE - * A B C D - */ - { - {PIRQA, PIRQB, PIRQC, PIRQD}, /* IDSEL 2 */ - {PIRQD, PIRQA, PIRQB, PIRQC}, - {PIRQC, PIRQD, PIRQA, PIRQB}, - {PIRQB, PIRQC, PIRQD, PIRQA}, /* IDSEL 5 */ - {0, 0, 0, 0}, /* -- */ - {0, 0, 0, 0}, /* -- */ - {0, 0, 0, 0}, /* -- */ - {0, 0, 0, 0}, /* -- */ - {0, 0, 0, 0}, /* -- */ - {0, 0, 0, 0}, /* -- */ - {PIRQA, PIRQB, PIRQC, PIRQD}, /* IDSEL 12 */ - {PIRQD, PIRQA, PIRQB, PIRQC}, - {PIRQC, PIRQD, PIRQA, PIRQB}, - {PIRQB, PIRQC, PIRQD, PIRQA}, /* IDSEL 15 */ - {0, 0, 0, 0}, /* -- */ - {0, 0, 0, 0}, /* -- */ - {PIRQA, PIRQB, PIRQC, PIRQD}, /* IDSEL 18 */ - {PIRQD, PIRQA, PIRQB, PIRQC}, - {PIRQC, PIRQD, PIRQA, PIRQB}, - {PIRQB, PIRQC, PIRQD, PIRQA}, /* IDSEL 21 */ - }; - - const long min_idsel = 2, max_idsel = 21, irqs_per_slot = 4; - return PCI_IRQ_TABLE_LOOKUP; -} - int mpc85xx_exclude_device(u_char bus, u_char devfn) { @@ -119,44 +47,63 @@ mpc85xx_exclude_device(u_char bus, u_char devfn) return PCIBIOS_SUCCESSFUL; } +void __init +mpc85xx_pcibios_fixup(void) +{ + struct pci_dev *dev = NULL; + + for_each_pci_dev(dev) + pci_read_irq_line(dev); +} #endif /* CONFIG_PCI */ void __init mpc85xx_ads_pic_init(void) { - struct mpic *mpic1; - phys_addr_t OpenPIC_PAddr; - - /* Determine the Physical Address of the OpenPIC regs */ - OpenPIC_PAddr = get_immrbase() + MPC85xx_OPENPIC_OFFSET; - - mpic1 = mpic_alloc(OpenPIC_PAddr, - MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN, - 4, MPC85xx_OPENPIC_IRQ_OFFSET, 0, 250, - mpc85xx_ads_openpic_initsenses, - sizeof(mpc85xx_ads_openpic_initsenses), - " OpenPIC "); - BUG_ON(mpic1 == NULL); - mpic_assign_isu(mpic1, 0, OpenPIC_PAddr + 0x10200); - mpic_assign_isu(mpic1, 1, OpenPIC_PAddr + 0x10280); - mpic_assign_isu(mpic1, 2, OpenPIC_PAddr + 0x10300); - mpic_assign_isu(mpic1, 3, OpenPIC_PAddr + 0x10380); - mpic_assign_isu(mpic1, 4, OpenPIC_PAddr + 0x10400); - mpic_assign_isu(mpic1, 5, OpenPIC_PAddr + 0x10480); - mpic_assign_isu(mpic1, 6, OpenPIC_PAddr + 0x10500); - mpic_assign_isu(mpic1, 7, OpenPIC_PAddr + 0x10580); - - /* dummy mappings to get to 48 */ - mpic_assign_isu(mpic1, 8, OpenPIC_PAddr + 0x10600); - mpic_assign_isu(mpic1, 9, OpenPIC_PAddr + 0x10680); - mpic_assign_isu(mpic1, 10, OpenPIC_PAddr + 0x10700); - mpic_assign_isu(mpic1, 11, OpenPIC_PAddr + 0x10780); - - /* External ints */ - mpic_assign_isu(mpic1, 12, OpenPIC_PAddr + 0x10000); - mpic_assign_isu(mpic1, 13, OpenPIC_PAddr + 0x10080); - mpic_assign_isu(mpic1, 14, OpenPIC_PAddr + 0x10100); - mpic_init(mpic1); + struct mpic *mpic; + struct resource r; + struct device_node *np = NULL; + + np = of_find_node_by_type(np, "open-pic"); + + if (np == NULL) { + printk(KERN_ERR "Could not find open-pic node\n"); + return; + } + + if(of_address_to_resource(np, 0, &r)) { + printk(KERN_ERR "Could not map mpic register space\n"); + of_node_put(np); + return; + } + + mpic = mpic_alloc(np, r.start, + MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN, + 4, 0, " OpenPIC "); + BUG_ON(mpic == NULL); + of_node_put(np); + + mpic_assign_isu(mpic, 0, r.start + 0x10200); + mpic_assign_isu(mpic, 1, r.start + 0x10280); + mpic_assign_isu(mpic, 2, r.start + 0x10300); + mpic_assign_isu(mpic, 3, r.start + 0x10380); + mpic_assign_isu(mpic, 4, r.start + 0x10400); + mpic_assign_isu(mpic, 5, r.start + 0x10480); + mpic_assign_isu(mpic, 6, r.start + 0x10500); + mpic_assign_isu(mpic, 7, r.start + 0x10580); + + /* Unused on this platform (leave room for 8548) */ + mpic_assign_isu(mpic, 8, r.start + 0x10600); + mpic_assign_isu(mpic, 9, r.start + 0x10680); + mpic_assign_isu(mpic, 10, r.start + 0x10700); + mpic_assign_isu(mpic, 11, r.start + 0x10780); + + /* External Interrupts */ + mpic_assign_isu(mpic, 12, r.start + 0x10000); + mpic_assign_isu(mpic, 13, r.start + 0x10080); + mpic_assign_isu(mpic, 14, r.start + 0x10100); + + mpic_init(mpic); } /* @@ -165,7 +112,9 @@ void __init mpc85xx_ads_pic_init(void) static void __init mpc85xx_ads_setup_arch(void) { struct device_node *cpu; +#ifdef CONFIG_PCI struct device_node *np; +#endif if (ppc_md.progress) ppc_md.progress("mpc85xx_ads_setup_arch()", 0); @@ -186,8 +135,7 @@ static void __init mpc85xx_ads_setup_arch(void) for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) add_bridge(np); - ppc_md.pci_swizzle = common_swizzle; - ppc_md.pci_map_irq = mpc85xx_map_irq; + ppc_md.pcibios_fixup = mpc85xx_pcibios_fixup; ppc_md.pci_exclude_device = mpc85xx_exclude_device; #endif -- cgit v1.2.3 From ddd64159eb0d090766eee79b191a974ffdd83a42 Mon Sep 17 00:00:00 2001 From: Andy Fleming Date: Thu, 17 Aug 2006 20:24:48 -0500 Subject: [POWERPC] Fix CDS IRQ handling and PCI code * Fix IRQ support in the 85xx CDS boards so it uses the new generic stuff * Fix PCI IRQ mapping to use the device tree * Disabled i8259 support to allow the CDS to boot. This will be fixed soon, but the current code doesn't even compile, so this is a vast improvement Signed-off-by: Andy Fleming Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/85xx/Kconfig | 1 - arch/powerpc/platforms/85xx/mpc85xx_cds.c | 210 +++++++++++++----------------- 2 files changed, 88 insertions(+), 123 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig index 454fc53289a..c3268d9877e 100644 --- a/arch/powerpc/platforms/85xx/Kconfig +++ b/arch/powerpc/platforms/85xx/Kconfig @@ -14,7 +14,6 @@ config MPC8540_ADS config MPC85xx_CDS bool "Freescale MPC85xx CDS" select DEFAULT_UIMAGE - select PPC_I8259 if PCI help This option enables support for the MPC85xx CDS board diff --git a/arch/powerpc/platforms/85xx/mpc85xx_cds.c b/arch/powerpc/platforms/85xx/mpc85xx_cds.c index 18e6e11f702..1d357d32a29 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_cds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_cds.c @@ -57,94 +57,8 @@ unsigned long isa_mem_base = 0; static int cds_pci_slot = 2; static volatile u8 *cadmus; -/* - * Internal interrupts are all Level Sensitive, and Positive Polarity - * - * Note: Likely, this table and the following function should be - * obtained and derived from the OF Device Tree. - */ -static u_char mpc85xx_cds_openpic_initsenses[] __initdata = { - MPC85XX_INTERNAL_IRQ_SENSES, -#if defined(CONFIG_PCI) - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Ext 0: PCI slot 0 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 1: PCI slot 1 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 2: PCI slot 2 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 3: PCI slot 3 */ -#else - 0x0, /* External 0: */ - 0x0, /* External 1: */ - 0x0, /* External 2: */ - 0x0, /* External 3: */ -#endif - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 5: PHY */ - 0x0, /* External 6: */ - 0x0, /* External 7: */ - 0x0, /* External 8: */ - 0x0, /* External 9: */ - 0x0, /* External 10: */ -#ifdef CONFIG_PCI - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 11: PCI2 slot 0 */ -#else - 0x0, /* External 11: */ -#endif -}; - #ifdef CONFIG_PCI -/* - * interrupt routing - */ -int -mpc85xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) -{ - struct pci_controller *hose = pci_bus_to_hose(dev->bus->number); - - if (!hose->index) - { - /* Handle PCI1 interrupts */ - char pci_irq_table[][4] = - /* - * PCI IDSEL/INTPIN->INTLINE - * A B C D - */ - - /* Note IRQ assignment for slots is based on which slot the elysium is - * in -- in this setup elysium is in slot #2 (this PIRQA as first - * interrupt on slot */ - { - { 0, 1, 2, 3 }, /* 16 - PMC */ - { 0, 1, 2, 3 }, /* 17 P2P (Tsi320) */ - { 0, 1, 2, 3 }, /* 18 - Slot 1 */ - { 1, 2, 3, 0 }, /* 19 - Slot 2 */ - { 2, 3, 0, 1 }, /* 20 - Slot 3 */ - { 3, 0, 1, 2 }, /* 21 - Slot 4 */ - }; - - const long min_idsel = 16, max_idsel = 21, irqs_per_slot = 4; - int i, j; - - for (i = 0; i < 6; i++) - for (j = 0; j < 4; j++) - pci_irq_table[i][j] = - ((pci_irq_table[i][j] + 5 - - cds_pci_slot) & 0x3) + PIRQ0A; - - return PCI_IRQ_TABLE_LOOKUP; - } else { - /* Handle PCI2 interrupts (if we have one) */ - char pci_irq_table[][4] = - { - /* - * We only have one slot and one interrupt - * going to PIRQA - PIRQD */ - { PIRQ1A, PIRQ1A, PIRQ1A, PIRQ1A }, /* 21 - slot 0 */ - }; - - const long min_idsel = 21, max_idsel = 21, irqs_per_slot = 4; - - return PCI_IRQ_TABLE_LOOKUP; - } -} #define ARCADIA_HOST_BRIDGE_IDSEL 17 #define ARCADIA_2ND_BRIDGE_IDSEL 3 @@ -210,50 +124,104 @@ mpc85xx_cds_pcibios_fixup(void) pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 11); pci_dev_put(dev); } + + /* Now map all the PCI irqs */ + dev = NULL; + for_each_pci_dev(dev) + pci_read_irq_line(dev); +} + +#ifdef CONFIG_PPC_I8259 +#warning The i8259 PIC support is currently broken +static void mpc85xx_8259_cascade(unsigned int irq, struct + irq_desc *desc, struct pt_regs *regs) +{ + unsigned int cascade_irq = i8259_irq(regs); + + if (cascade_irq != NO_IRQ) + generic_handle_irq(cascade_irq, regs); + + desc->chip->eoi(irq); } +#endif /* PPC_I8259 */ #endif /* CONFIG_PCI */ void __init mpc85xx_cds_pic_init(void) { - struct mpic *mpic1; - phys_addr_t OpenPIC_PAddr; + struct mpic *mpic; + struct resource r; + struct device_node *np = NULL; + struct device_node *cascade_node = NULL; + int cascade_irq; - /* Determine the Physical Address of the OpenPIC regs */ - OpenPIC_PAddr = get_immrbase() + MPC85xx_OPENPIC_OFFSET; + np = of_find_node_by_type(np, "open-pic"); + + if (np == NULL) { + printk(KERN_ERR "Could not find open-pic node\n"); + return; + } - mpic1 = mpic_alloc(OpenPIC_PAddr, + if (of_address_to_resource(np, 0, &r)) { + printk(KERN_ERR "Failed to map mpic register space\n"); + of_node_put(np); + return; + } + + mpic = mpic_alloc(np, r.start, MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN, - 4, MPC85xx_OPENPIC_IRQ_OFFSET, 0, 250, - mpc85xx_cds_openpic_initsenses, - sizeof(mpc85xx_cds_openpic_initsenses), " OpenPIC "); - BUG_ON(mpic1 == NULL); - mpic_assign_isu(mpic1, 0, OpenPIC_PAddr + 0x10200); - mpic_assign_isu(mpic1, 1, OpenPIC_PAddr + 0x10280); - mpic_assign_isu(mpic1, 2, OpenPIC_PAddr + 0x10300); - mpic_assign_isu(mpic1, 3, OpenPIC_PAddr + 0x10380); - mpic_assign_isu(mpic1, 4, OpenPIC_PAddr + 0x10400); - mpic_assign_isu(mpic1, 5, OpenPIC_PAddr + 0x10480); - mpic_assign_isu(mpic1, 6, OpenPIC_PAddr + 0x10500); - mpic_assign_isu(mpic1, 7, OpenPIC_PAddr + 0x10580); - - /* dummy mappings to get to 48 */ - mpic_assign_isu(mpic1, 8, OpenPIC_PAddr + 0x10600); - mpic_assign_isu(mpic1, 9, OpenPIC_PAddr + 0x10680); - mpic_assign_isu(mpic1, 10, OpenPIC_PAddr + 0x10700); - mpic_assign_isu(mpic1, 11, OpenPIC_PAddr + 0x10780); - - /* External ints */ - mpic_assign_isu(mpic1, 12, OpenPIC_PAddr + 0x10000); - mpic_assign_isu(mpic1, 13, OpenPIC_PAddr + 0x10080); - mpic_assign_isu(mpic1, 14, OpenPIC_PAddr + 0x10100); - - mpic_init(mpic1); + 4, 0, " OpenPIC "); + BUG_ON(mpic == NULL); + + /* Return the mpic node */ + of_node_put(np); + + mpic_assign_isu(mpic, 0, r.start + 0x10200); + mpic_assign_isu(mpic, 1, r.start + 0x10280); + mpic_assign_isu(mpic, 2, r.start + 0x10300); + mpic_assign_isu(mpic, 3, r.start + 0x10380); + mpic_assign_isu(mpic, 4, r.start + 0x10400); + mpic_assign_isu(mpic, 5, r.start + 0x10480); + mpic_assign_isu(mpic, 6, r.start + 0x10500); + mpic_assign_isu(mpic, 7, r.start + 0x10580); + + /* Used only for 8548 so far, but no harm in + * allocating them for everyone */ + mpic_assign_isu(mpic, 8, r.start + 0x10600); + mpic_assign_isu(mpic, 9, r.start + 0x10680); + mpic_assign_isu(mpic, 10, r.start + 0x10700); + mpic_assign_isu(mpic, 11, r.start + 0x10780); + + /* External Interrupts */ + mpic_assign_isu(mpic, 12, r.start + 0x10000); + mpic_assign_isu(mpic, 13, r.start + 0x10080); + mpic_assign_isu(mpic, 14, r.start + 0x10100); + + mpic_init(mpic); + +#ifdef CONFIG_PPC_I8259 + /* Initialize the i8259 controller */ + for_each_node_by_type(np, "interrupt-controller") + if (device_is_compatible(np, "chrp,iic")) { + cascade_node = np; + break; + } + + if (cascade_node == NULL) { + printk(KERN_DEBUG "Could not find i8259 PIC\n"); + return; + } -#ifdef CONFIG_PCI - mpic_setup_cascade(PIRQ0A, i8259_irq_cascade, NULL); + cascade_irq = irq_of_parse_and_map(cascade_node, 0); + if (cascade_irq == NO_IRQ) { + printk(KERN_ERR "Failed to map cascade interrupt\n"); + return; + } - i8259_init(0,0); -#endif + i8259_init(cascade_node, 0); + of_node_put(cascade_node); + + set_irq_chained_handler(cascade_irq, mpc85xx_8259_cascade); +#endif /* CONFIG_PPC_I8259 */ } @@ -298,8 +266,6 @@ mpc85xx_cds_setup_arch(void) add_bridge(np); ppc_md.pcibios_fixup = mpc85xx_cds_pcibios_fixup; - ppc_md.pci_swizzle = common_swizzle; - ppc_md.pci_map_irq = mpc85xx_map_irq; ppc_md.pci_exclude_device = mpc85xx_exclude_device; #endif -- cgit v1.2.3 From 2654d6385f6cad00cfb8f5087aeb10d0ed781e74 Mon Sep 17 00:00:00 2001 From: Andy Fleming Date: Fri, 18 Aug 2006 18:04:34 -0500 Subject: [POWERPC] Add 85xx DTS files to powerpc Added the mpc85xx family of dts files to the powerpc tree Signed-off-by: Paul Mackerras --- arch/powerpc/boot/dts/mpc8540ads.dts | 257 +++++++++++++++++++++++++++++++ arch/powerpc/boot/dts/mpc8541cds.dts | 244 +++++++++++++++++++++++++++++ arch/powerpc/boot/dts/mpc8548cds.dts | 287 +++++++++++++++++++++++++++++++++++ arch/powerpc/boot/dts/mpc8555cds.dts | 244 +++++++++++++++++++++++++++++ 4 files changed, 1032 insertions(+) create mode 100644 arch/powerpc/boot/dts/mpc8540ads.dts create mode 100644 arch/powerpc/boot/dts/mpc8541cds.dts create mode 100644 arch/powerpc/boot/dts/mpc8548cds.dts create mode 100644 arch/powerpc/boot/dts/mpc8555cds.dts (limited to 'arch/powerpc') diff --git a/arch/powerpc/boot/dts/mpc8540ads.dts b/arch/powerpc/boot/dts/mpc8540ads.dts new file mode 100644 index 00000000000..93d2c2de656 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8540ads.dts @@ -0,0 +1,257 @@ +/* + * MPC8540 ADS Device Tree Source + * + * Copyright 2006 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + + +/ { + model = "MPC8540ADS"; + compatible = "MPC85xxADS"; + #address-cells = <1>; + #size-cells = <1>; + linux,phandle = <100>; + + cpus { + #cpus = <1>; + #address-cells = <1>; + #size-cells = <0>; + linux,phandle = <200>; + + PowerPC,8540@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <20>; // 32 bytes + i-cache-line-size = <20>; // 32 bytes + d-cache-size = <8000>; // L1, 32K + i-cache-size = <8000>; // L1, 32K + timebase-frequency = <0>; // 33 MHz, from uboot + bus-frequency = <0>; // 166 MHz + clock-frequency = <0>; // 825 MHz, from uboot + 32-bit; + linux,phandle = <201>; + }; + }; + + memory { + device_type = "memory"; + linux,phandle = <300>; + reg = <00000000 08000000>; // 128M at 0x0 + }; + + soc8540@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + device_type = "soc"; + ranges = <0 e0000000 00100000>; + reg = ; // CCSRBAR 1M + bus-frequency = <0>; + + i2c@3000 { + device_type = "i2c"; + compatible = "fsl-i2c"; + reg = <3000 100>; + interrupts = <1b 2>; + interrupt-parent = <40000>; + dfsrr; + }; + + mdio@24520 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "mdio"; + compatible = "gianfar"; + reg = <24520 20>; + linux,phandle = <24520>; + ethernet-phy@0 { + linux,phandle = <2452000>; + interrupt-parent = <40000>; + interrupts = <35 1>; + reg = <0>; + device_type = "ethernet-phy"; + }; + ethernet-phy@1 { + linux,phandle = <2452001>; + interrupt-parent = <40000>; + interrupts = <35 1>; + reg = <1>; + device_type = "ethernet-phy"; + }; + ethernet-phy@2 { + linux,phandle = <2452002>; + interrupt-parent = <40000>; + interrupts = <37 1>; + reg = <2>; + device_type = "ethernet-phy"; + }; + }; + + ethernet@24000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <24000 1000>; + address = [ 00 E0 0C 00 73 00 ]; + local-mac-address = [ 00 E0 0C 00 73 00 ]; + interrupts = ; + interrupt-parent = <40000>; + phy-handle = <2452000>; + }; + + ethernet@25000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <25000 1000>; + address = [ 00 E0 0C 00 73 01 ]; + local-mac-address = [ 00 E0 0C 00 73 01 ]; + interrupts = <13 2 14 2 18 2>; + interrupt-parent = <40000>; + phy-handle = <2452001>; + }; + + ethernet@26000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <26000 1000>; + address = [ 00 E0 0C 00 73 02 ]; + local-mac-address = [ 00 E0 0C 00 73 02 ]; + interrupts = <19 2>; + interrupt-parent = <40000>; + phy-handle = <2452002>; + }; + + serial@4500 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4500 100>; // reg base, size + clock-frequency = <0>; // should we fill in in uboot? + interrupts = <1a 2>; + interrupt-parent = <40000>; + }; + + serial@4600 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4600 100>; // reg base, size + clock-frequency = <0>; // should we fill in in uboot? + interrupts = <1a 2>; + interrupt-parent = <40000>; + }; + pci@8000 { + linux,phandle = <8000>; + interrupt-map-mask = ; + interrupt-map = < + + /* IDSEL 0x02 */ + 1000 0 0 1 40000 31 1 + 1000 0 0 2 40000 32 1 + 1000 0 0 3 40000 33 1 + 1000 0 0 4 40000 34 1 + + /* IDSEL 0x03 */ + 1800 0 0 1 40000 34 1 + 1800 0 0 2 40000 31 1 + 1800 0 0 3 40000 32 1 + 1800 0 0 4 40000 33 1 + + /* IDSEL 0x04 */ + 2000 0 0 1 40000 33 1 + 2000 0 0 2 40000 34 1 + 2000 0 0 3 40000 31 1 + 2000 0 0 4 40000 32 1 + + /* IDSEL 0x05 */ + 2800 0 0 1 40000 32 1 + 2800 0 0 2 40000 33 1 + 2800 0 0 3 40000 34 1 + 2800 0 0 4 40000 31 1 + + /* IDSEL 0x0c */ + 6000 0 0 1 40000 31 1 + 6000 0 0 2 40000 32 1 + 6000 0 0 3 40000 33 1 + 6000 0 0 4 40000 34 1 + + /* IDSEL 0x0d */ + 6800 0 0 1 40000 34 1 + 6800 0 0 2 40000 31 1 + 6800 0 0 3 40000 32 1 + 6800 0 0 4 40000 33 1 + + /* IDSEL 0x0e */ + 7000 0 0 1 40000 33 1 + 7000 0 0 2 40000 34 1 + 7000 0 0 3 40000 31 1 + 7000 0 0 4 40000 32 1 + + /* IDSEL 0x0f */ + 7800 0 0 1 40000 32 1 + 7800 0 0 2 40000 33 1 + 7800 0 0 3 40000 34 1 + 7800 0 0 4 40000 31 1 + + /* IDSEL 0x12 */ + 9000 0 0 1 40000 31 1 + 9000 0 0 2 40000 32 1 + 9000 0 0 3 40000 33 1 + 9000 0 0 4 40000 34 1 + + /* IDSEL 0x13 */ + 9800 0 0 1 40000 34 1 + 9800 0 0 2 40000 31 1 + 9800 0 0 3 40000 32 1 + 9800 0 0 4 40000 33 1 + + /* IDSEL 0x14 */ + a000 0 0 1 40000 33 1 + a000 0 0 2 40000 34 1 + a000 0 0 3 40000 31 1 + a000 0 0 4 40000 32 1 + + /* IDSEL 0x15 */ + a800 0 0 1 40000 32 1 + a800 0 0 2 40000 33 1 + a800 0 0 3 40000 34 1 + a800 0 0 4 40000 31 1>; + interrupt-parent = <40000>; + interrupts = <08 2>; + bus-range = <0 0>; + ranges = <02000000 0 80000000 80000000 0 20000000 + 01000000 0 00000000 e2000000 0 00100000>; + clock-frequency = <3f940aa>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <8000 1000>; + compatible = "85xx"; + device_type = "pci"; + }; + + pic@40000 { + linux,phandle = <40000>; + clock-frequency = <0>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <40000 40000>; + built-in; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + big-endian; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc8541cds.dts b/arch/powerpc/boot/dts/mpc8541cds.dts new file mode 100644 index 00000000000..7be0bc659e1 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8541cds.dts @@ -0,0 +1,244 @@ +/* + * MPC8541 CDS Device Tree Source + * + * Copyright 2006 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + + +/ { + model = "MPC8541CDS"; + compatible = "MPC85xxCDS"; + #address-cells = <1>; + #size-cells = <1>; + linux,phandle = <100>; + + cpus { + #cpus = <1>; + #address-cells = <1>; + #size-cells = <0>; + linux,phandle = <200>; + + PowerPC,8541@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <20>; // 32 bytes + i-cache-line-size = <20>; // 32 bytes + d-cache-size = <8000>; // L1, 32K + i-cache-size = <8000>; // L1, 32K + timebase-frequency = <0>; // 33 MHz, from uboot + bus-frequency = <0>; // 166 MHz + clock-frequency = <0>; // 825 MHz, from uboot + 32-bit; + linux,phandle = <201>; + }; + }; + + memory { + device_type = "memory"; + linux,phandle = <300>; + reg = <00000000 08000000>; // 128M at 0x0 + }; + + soc8541@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + device_type = "soc"; + ranges = <0 e0000000 00100000>; + reg = ; // CCSRBAR 1M + bus-frequency = <0>; + + i2c@3000 { + device_type = "i2c"; + compatible = "fsl-i2c"; + reg = <3000 100>; + interrupts = <1b 2>; + interrupt-parent = <40000>; + dfsrr; + }; + + mdio@24520 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "mdio"; + compatible = "gianfar"; + reg = <24520 20>; + linux,phandle = <24520>; + ethernet-phy@0 { + linux,phandle = <2452000>; + interrupt-parent = <40000>; + interrupts = <35 0>; + reg = <0>; + device_type = "ethernet-phy"; + }; + ethernet-phy@1 { + linux,phandle = <2452001>; + interrupt-parent = <40000>; + interrupts = <35 0>; + reg = <1>; + device_type = "ethernet-phy"; + }; + }; + + ethernet@24000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <24000 1000>; + local-mac-address = [ 00 E0 0C 00 73 00 ]; + interrupts = ; + interrupt-parent = <40000>; + phy-handle = <2452000>; + }; + + ethernet@25000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <25000 1000>; + local-mac-address = [ 00 E0 0C 00 73 01 ]; + interrupts = <13 2 14 2 18 2>; + interrupt-parent = <40000>; + phy-handle = <2452001>; + }; + + serial@4500 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4500 100>; // reg base, size + clock-frequency = <0>; // should we fill in in uboot? + interrupts = <1a 2>; + interrupt-parent = <40000>; + }; + + serial@4600 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4600 100>; // reg base, size + clock-frequency = <0>; // should we fill in in uboot? + interrupts = <1a 2>; + interrupt-parent = <40000>; + }; + + pci@8000 { + linux,phandle = <8000>; + interrupt-map-mask = <1f800 0 0 7>; + interrupt-map = < + + /* IDSEL 0x10 */ + 08000 0 0 1 40000 30 1 + 08000 0 0 2 40000 31 1 + 08000 0 0 3 40000 32 1 + 08000 0 0 4 40000 33 1 + + /* IDSEL 0x11 */ + 08800 0 0 1 40000 30 1 + 08800 0 0 2 40000 31 1 + 08800 0 0 3 40000 32 1 + 08800 0 0 4 40000 33 1 + + /* IDSEL 0x12 (Slot 1) */ + 09000 0 0 1 40000 30 1 + 09000 0 0 2 40000 31 1 + 09000 0 0 3 40000 32 1 + 09000 0 0 4 40000 33 1 + + /* IDSEL 0x13 (Slot 2) */ + 09800 0 0 1 40000 31 1 + 09800 0 0 2 40000 32 1 + 09800 0 0 3 40000 33 1 + 09800 0 0 4 40000 30 1 + + /* IDSEL 0x14 (Slot 3) */ + 0a000 0 0 1 40000 32 1 + 0a000 0 0 2 40000 33 1 + 0a000 0 0 3 40000 30 1 + 0a000 0 0 4 40000 31 1 + + /* IDSEL 0x15 (Slot 4) */ + 0a800 0 0 1 40000 33 1 + 0a800 0 0 2 40000 30 1 + 0a800 0 0 3 40000 31 1 + 0a800 0 0 4 40000 32 1 + + /* Bus 1 (Tundra Bridge) */ + /* IDSEL 0x12 (ISA bridge) */ + 19000 0 0 1 40000 30 1 + 19000 0 0 2 40000 31 1 + 19000 0 0 3 40000 32 1 + 19000 0 0 4 40000 33 1>; + interrupt-parent = <40000>; + interrupts = <08 2>; + bus-range = <0 0>; + ranges = <02000000 0 80000000 80000000 0 20000000 + 01000000 0 00000000 e2000000 0 00100000>; + clock-frequency = <3f940aa>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <8000 1000>; + compatible = "85xx"; + device_type = "pci"; + + i8259@19000 { + clock-frequency = <0>; + interrupt-controller; + device_type = "interrupt-controller"; + reg = <19000 0 0 0 1>; + #address-cells = <0>; + #interrupt-cells = <2>; + built-in; + compatible = "chrp,iic"; + big-endian; + interrupts = <1>; + interrupt-parent = <8000>; + }; + }; + + pci@9000 { + linux,phandle = <9000>; + interrupt-map-mask = ; + interrupt-map = < + + /* IDSEL 0x15 */ + a800 0 0 1 40000 3b 1 + a800 0 0 2 40000 3b 1 + a800 0 0 3 40000 3b 1 + a800 0 0 4 40000 3b 1>; + interrupt-parent = <40000>; + interrupts = <09 2>; + bus-range = <0 0>; + ranges = <02000000 0 a0000000 a0000000 0 20000000 + 01000000 0 00000000 e3000000 0 00100000>; + clock-frequency = <3f940aa>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <9000 1000>; + compatible = "85xx"; + device_type = "pci"; + }; + + pic@40000 { + linux,phandle = <40000>; + clock-frequency = <0>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <40000 40000>; + built-in; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + big-endian; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc8548cds.dts b/arch/powerpc/boot/dts/mpc8548cds.dts new file mode 100644 index 00000000000..893d7957c17 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8548cds.dts @@ -0,0 +1,287 @@ +/* + * MPC8555 CDS Device Tree Source + * + * Copyright 2006 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + + +/ { + model = "MPC8548CDS"; + compatible = "MPC85xxCDS"; + #address-cells = <1>; + #size-cells = <1>; + linux,phandle = <100>; + + cpus { + #cpus = <1>; + #address-cells = <1>; + #size-cells = <0>; + linux,phandle = <200>; + + PowerPC,8548@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <20>; // 32 bytes + i-cache-line-size = <20>; // 32 bytes + d-cache-size = <8000>; // L1, 32K + i-cache-size = <8000>; // L1, 32K + timebase-frequency = <0>; // 33 MHz, from uboot + bus-frequency = <0>; // 166 MHz + clock-frequency = <0>; // 825 MHz, from uboot + 32-bit; + linux,phandle = <201>; + }; + }; + + memory { + device_type = "memory"; + linux,phandle = <300>; + reg = <00000000 08000000>; // 128M at 0x0 + }; + + soc8548@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + device_type = "soc"; + ranges = <0 e0000000 00100000>; + reg = ; // CCSRBAR 1M + bus-frequency = <0>; + + i2c@3000 { + device_type = "i2c"; + compatible = "fsl-i2c"; + reg = <3000 100>; + interrupts = <1b 2>; + interrupt-parent = <40000>; + dfsrr; + }; + + mdio@24520 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "mdio"; + compatible = "gianfar"; + reg = <24520 20>; + linux,phandle = <24520>; + ethernet-phy@0 { + linux,phandle = <2452000>; + interrupt-parent = <40000>; + interrupts = <35 0>; + reg = <0>; + device_type = "ethernet-phy"; + }; + ethernet-phy@1 { + linux,phandle = <2452001>; + interrupt-parent = <40000>; + interrupts = <35 0>; + reg = <1>; + device_type = "ethernet-phy"; + }; + + ethernet-phy@2 { + linux,phandle = <2452002>; + interrupt-parent = <40000>; + interrupts = <35 0>; + reg = <2>; + device_type = "ethernet-phy"; + }; + ethernet-phy@3 { + linux,phandle = <2452003>; + interrupt-parent = <40000>; + interrupts = <35 0>; + reg = <3>; + device_type = "ethernet-phy"; + }; + }; + + ethernet@24000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <24000 1000>; + local-mac-address = [ 00 E0 0C 00 73 00 ]; + interrupts = ; + interrupt-parent = <40000>; + phy-handle = <2452000>; + }; + + ethernet@25000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <25000 1000>; + local-mac-address = [ 00 E0 0C 00 73 01 ]; + interrupts = <13 2 14 2 18 2>; + interrupt-parent = <40000>; + phy-handle = <2452001>; + }; + + ethernet@26000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <26000 1000>; + local-mac-address = [ 00 E0 0C 00 73 02 ]; + interrupts = ; + interrupt-parent = <40000>; + phy-handle = <2452001>; + }; + +/* eTSEC 4 is currently broken + ethernet@27000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <27000 1000>; + local-mac-address = [ 00 E0 0C 00 73 03 ]; + interrupts = <15 2 16 2 17 2>; + interrupt-parent = <40000>; + phy-handle = <2452001>; + }; + */ + + serial@4500 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4500 100>; // reg base, size + clock-frequency = <0>; // should we fill in in uboot? + interrupts = <1a 2>; + interrupt-parent = <40000>; + }; + + serial@4600 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4600 100>; // reg base, size + clock-frequency = <0>; // should we fill in in uboot? + interrupts = <1a 2>; + interrupt-parent = <40000>; + }; + + pci@8000 { + linux,phandle = <8000>; + interrupt-map-mask = <1f800 0 0 7>; + interrupt-map = < + + /* IDSEL 0x10 */ + 08000 0 0 1 40000 30 1 + 08000 0 0 2 40000 31 1 + 08000 0 0 3 40000 32 1 + 08000 0 0 4 40000 33 1 + + /* IDSEL 0x11 */ + 08800 0 0 1 40000 30 1 + 08800 0 0 2 40000 31 1 + 08800 0 0 3 40000 32 1 + 08800 0 0 4 40000 33 1 + + /* IDSEL 0x12 (Slot 1) */ + 09000 0 0 1 40000 30 1 + 09000 0 0 2 40000 31 1 + 09000 0 0 3 40000 32 1 + 09000 0 0 4 40000 33 1 + + /* IDSEL 0x13 (Slot 2) */ + 09800 0 0 1 40000 31 1 + 09800 0 0 2 40000 32 1 + 09800 0 0 3 40000 33 1 + 09800 0 0 4 40000 30 1 + + /* IDSEL 0x14 (Slot 3) */ + 0a000 0 0 1 40000 32 1 + 0a000 0 0 2 40000 33 1 + 0a000 0 0 3 40000 30 1 + 0a000 0 0 4 40000 31 1 + + /* IDSEL 0x15 (Slot 4) */ + 0a800 0 0 1 40000 33 1 + 0a800 0 0 2 40000 30 1 + 0a800 0 0 3 40000 31 1 + 0a800 0 0 4 40000 32 1 + + /* Bus 1 (Tundra Bridge) */ + /* IDSEL 0x12 (ISA bridge) */ + 19000 0 0 1 40000 30 1 + 19000 0 0 2 40000 31 1 + 19000 0 0 3 40000 32 1 + 19000 0 0 4 40000 33 1>; + interrupt-parent = <40000>; + interrupts = <08 2>; + bus-range = <0 0>; + ranges = <02000000 0 80000000 80000000 0 20000000 + 01000000 0 00000000 e2000000 0 00100000>; + clock-frequency = <3f940aa>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <8000 1000>; + compatible = "85xx"; + device_type = "pci"; + + i8259@19000 { + clock-frequency = <0>; + interrupt-controller; + device_type = "interrupt-controller"; + reg = <19000 0 0 0 1>; + #address-cells = <0>; + #interrupt-cells = <2>; + built-in; + compatible = "chrp,iic"; + big-endian; + interrupts = <1>; + interrupt-parent = <8000>; + }; + }; + + pci@9000 { + linux,phandle = <9000>; + interrupt-map-mask = ; + interrupt-map = < + + /* IDSEL 0x15 */ + a800 0 0 1 40000 3b 1 + a800 0 0 2 40000 3b 1 + a800 0 0 3 40000 3b 1 + a800 0 0 4 40000 3b 1>; + interrupt-parent = <40000>; + interrupts = <09 2>; + bus-range = <0 0>; + ranges = <02000000 0 a0000000 a0000000 0 20000000 + 01000000 0 00000000 e3000000 0 00100000>; + clock-frequency = <3f940aa>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <9000 1000>; + compatible = "85xx"; + device_type = "pci"; + }; + + pic@40000 { + linux,phandle = <40000>; + clock-frequency = <0>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <40000 40000>; + built-in; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + big-endian; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc8555cds.dts b/arch/powerpc/boot/dts/mpc8555cds.dts new file mode 100644 index 00000000000..118f5a88765 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8555cds.dts @@ -0,0 +1,244 @@ +/* + * MPC8555 CDS Device Tree Source + * + * Copyright 2006 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + + +/ { + model = "MPC8555CDS"; + compatible = "MPC85xxCDS"; + #address-cells = <1>; + #size-cells = <1>; + linux,phandle = <100>; + + cpus { + #cpus = <1>; + #address-cells = <1>; + #size-cells = <0>; + linux,phandle = <200>; + + PowerPC,8555@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <20>; // 32 bytes + i-cache-line-size = <20>; // 32 bytes + d-cache-size = <8000>; // L1, 32K + i-cache-size = <8000>; // L1, 32K + timebase-frequency = <0>; // 33 MHz, from uboot + bus-frequency = <0>; // 166 MHz + clock-frequency = <0>; // 825 MHz, from uboot + 32-bit; + linux,phandle = <201>; + }; + }; + + memory { + device_type = "memory"; + linux,phandle = <300>; + reg = <00000000 08000000>; // 128M at 0x0 + }; + + soc8555@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + device_type = "soc"; + ranges = <0 e0000000 00100000>; + reg = ; // CCSRBAR 1M + bus-frequency = <0>; + + i2c@3000 { + device_type = "i2c"; + compatible = "fsl-i2c"; + reg = <3000 100>; + interrupts = <1b 2>; + interrupt-parent = <40000>; + dfsrr; + }; + + mdio@24520 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "mdio"; + compatible = "gianfar"; + reg = <24520 20>; + linux,phandle = <24520>; + ethernet-phy@0 { + linux,phandle = <2452000>; + interrupt-parent = <40000>; + interrupts = <35 0>; + reg = <0>; + device_type = "ethernet-phy"; + }; + ethernet-phy@1 { + linux,phandle = <2452001>; + interrupt-parent = <40000>; + interrupts = <35 0>; + reg = <1>; + device_type = "ethernet-phy"; + }; + }; + + ethernet@24000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <24000 1000>; + local-mac-address = [ 00 E0 0C 00 73 00 ]; + interrupts = <0d 2 0e 2 12 2>; + interrupt-parent = <40000>; + phy-handle = <2452000>; + }; + + ethernet@25000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <25000 1000>; + local-mac-address = [ 00 E0 0C 00 73 01 ]; + interrupts = <13 2 14 2 18 2>; + interrupt-parent = <40000>; + phy-handle = <2452001>; + }; + + serial@4500 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4500 100>; // reg base, size + clock-frequency = <0>; // should we fill in in uboot? + interrupts = <1a 2>; + interrupt-parent = <40000>; + }; + + serial@4600 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4600 100>; // reg base, size + clock-frequency = <0>; // should we fill in in uboot? + interrupts = <1a 2>; + interrupt-parent = <40000>; + }; + + pci@8000 { + linux,phandle = <8000>; + interrupt-map-mask = <1f800 0 0 7>; + interrupt-map = < + + /* IDSEL 0x10 */ + 08000 0 0 1 40000 30 1 + 08000 0 0 2 40000 31 1 + 08000 0 0 3 40000 32 1 + 08000 0 0 4 40000 33 1 + + /* IDSEL 0x11 */ + 08800 0 0 1 40000 30 1 + 08800 0 0 2 40000 31 1 + 08800 0 0 3 40000 32 1 + 08800 0 0 4 40000 33 1 + + /* IDSEL 0x12 (Slot 1) */ + 09000 0 0 1 40000 30 1 + 09000 0 0 2 40000 31 1 + 09000 0 0 3 40000 32 1 + 09000 0 0 4 40000 33 1 + + /* IDSEL 0x13 (Slot 2) */ + 09800 0 0 1 40000 31 1 + 09800 0 0 2 40000 32 1 + 09800 0 0 3 40000 33 1 + 09800 0 0 4 40000 30 1 + + /* IDSEL 0x14 (Slot 3) */ + 0a000 0 0 1 40000 32 1 + 0a000 0 0 2 40000 33 1 + 0a000 0 0 3 40000 30 1 + 0a000 0 0 4 40000 31 1 + + /* IDSEL 0x15 (Slot 4) */ + 0a800 0 0 1 40000 33 1 + 0a800 0 0 2 40000 30 1 + 0a800 0 0 3 40000 31 1 + 0a800 0 0 4 40000 32 1 + + /* Bus 1 (Tundra Bridge) */ + /* IDSEL 0x12 (ISA bridge) */ + 19000 0 0 1 40000 30 1 + 19000 0 0 2 40000 31 1 + 19000 0 0 3 40000 32 1 + 19000 0 0 4 40000 33 1>; + interrupt-parent = <40000>; + interrupts = <08 2>; + bus-range = <0 0>; + ranges = <02000000 0 80000000 80000000 0 20000000 + 01000000 0 00000000 e2000000 0 00100000>; + clock-frequency = <3f940aa>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <8000 1000>; + compatible = "85xx"; + device_type = "pci"; + + i8259@19000 { + clock-frequency = <0>; + interrupt-controller; + device_type = "interrupt-controller"; + reg = <19000 0 0 0 1>; + #address-cells = <0>; + #interrupt-cells = <2>; + built-in; + compatible = "chrp,iic"; + big-endian; + interrupts = <1>; + interrupt-parent = <8000>; + }; + }; + + pci@9000 { + linux,phandle = <9000>; + interrupt-map-mask = ; + interrupt-map = < + + /* IDSEL 0x15 */ + a800 0 0 1 40000 3b 1 + a800 0 0 2 40000 3b 1 + a800 0 0 3 40000 3b 1 + a800 0 0 4 40000 3b 1>; + interrupt-parent = <40000>; + interrupts = <09 2>; + bus-range = <0 0>; + ranges = <02000000 0 a0000000 a0000000 0 20000000 + 01000000 0 00000000 e3000000 0 00100000>; + clock-frequency = <3f940aa>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <9000 1000>; + compatible = "85xx"; + device_type = "pci"; + }; + + pic@40000 { + linux,phandle = <40000>; + clock-frequency = <0>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <40000 40000>; + built-in; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + big-endian; + }; + }; +}; -- cgit v1.2.3 From 343832734fac000d2d276ccc41955daded1265f5 Mon Sep 17 00:00:00 2001 From: Jon Loeliger Date: Fri, 18 Aug 2006 14:30:35 -0500 Subject: [POWERPC] Rewrite the PPC 86xx IRQ handling to use Flat Device Tree IRQ setup now comes from the Flat Device Tree and use the new generic IRQ code. Fixed the fsl_soc.c IRQ OF interrupt node parsing. Removed some unused MPC86xx macro definition. Signed-off-by: Zhang Wei Signed-off-by: Jon Loeliger Signed-off-by: Paul Mackerras (cherry picked from 919fede6edab94cccb3ca8c1c0b32fa62c9369a5 commit) --- arch/powerpc/platforms/86xx/mpc8641_hpcn.h | 32 --- arch/powerpc/platforms/86xx/mpc86xx_hpcn.c | 324 ++++++++++++++++------------- arch/powerpc/sysdev/fsl_soc.c | 30 ++- 3 files changed, 188 insertions(+), 198 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/86xx/mpc8641_hpcn.h b/arch/powerpc/platforms/86xx/mpc8641_hpcn.h index 5d2bcf78cef..41e554c4af9 100644 --- a/arch/powerpc/platforms/86xx/mpc8641_hpcn.h +++ b/arch/powerpc/platforms/86xx/mpc8641_hpcn.h @@ -16,38 +16,6 @@ #include -/* PCI interrupt controller */ -#define PIRQA 3 -#define PIRQB 4 -#define PIRQC 5 -#define PIRQD 6 -#define PIRQ7 7 -#define PIRQE 9 -#define PIRQF 10 -#define PIRQG 11 -#define PIRQH 12 - -/* PCI-Express memory map */ -#define MPC86XX_PCIE_LOWER_IO 0x00000000 -#define MPC86XX_PCIE_UPPER_IO 0x00ffffff - -#define MPC86XX_PCIE_LOWER_MEM 0x80000000 -#define MPC86XX_PCIE_UPPER_MEM 0x9fffffff - -#define MPC86XX_PCIE_IO_BASE 0xe2000000 -#define MPC86XX_PCIE_MEM_OFFSET 0x00000000 - -#define MPC86XX_PCIE_IO_SIZE 0x01000000 - -#define PCIE1_CFG_ADDR_OFFSET (0x8000) -#define PCIE1_CFG_DATA_OFFSET (0x8004) - -#define PCIE2_CFG_ADDR_OFFSET (0x9000) -#define PCIE2_CFG_DATA_OFFSET (0x9004) - -#define MPC86xx_PCIE_OFFSET PCIE1_CFG_ADDR_OFFSET -#define MPC86xx_PCIE_SIZE (0x1000) - #define MPC86XX_RSTCR_OFFSET (0xe00b0) /* Reset Control Register */ #endif /* __MPC8641_HPCN_H__ */ diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c index ebae73eb006..146da3001c6 100644 --- a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c +++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c @@ -37,6 +37,14 @@ #include "mpc86xx.h" #include "mpc8641_hpcn.h" +#undef DEBUG + +#ifdef DEBUG +#define DBG(fmt...) do { printk(KERN_ERR fmt); } while(0) +#else +#define DBG(fmt...) do { } while(0) +#endif + #ifndef CONFIG_PCI unsigned long isa_io_base = 0; unsigned long isa_mem_base = 0; @@ -44,205 +52,215 @@ unsigned long pci_dram_offset = 0; #endif -/* - * Internal interrupts are all Level Sensitive, and Positive Polarity - */ - -static u_char mpc86xx_hpcn_openpic_initsenses[] __initdata = { - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 0: Reserved */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 1: MCM */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 2: DDR DRAM */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 3: LBIU */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 4: DMA 0 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 5: DMA 1 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 6: DMA 2 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 7: DMA 3 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 8: PCIE1 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 9: PCIE2 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 10: Reserved */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 11: Reserved */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 12: DUART2 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 13: TSEC 1 Transmit */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 14: TSEC 1 Receive */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 15: TSEC 3 transmit */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 16: TSEC 3 receive */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 17: TSEC 3 error */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 18: TSEC 1 Receive/Transmit Error */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 19: TSEC 2 Transmit */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 20: TSEC 2 Receive */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 21: TSEC 4 transmit */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 22: TSEC 4 receive */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 23: TSEC 4 error */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 24: TSEC 2 Receive/Transmit Error */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 25: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 26: DUART1 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 27: I2C */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 28: Performance Monitor */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 29: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 30: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 31: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 32: SRIO error/write-port unit */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 33: SRIO outbound doorbell */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 34: SRIO inbound doorbell */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 35: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 36: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 37: SRIO outbound message unit 1 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 38: SRIO inbound message unit 1 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 39: SRIO outbound message unit 2 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 40: SRIO inbound message unit 2 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 41: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 42: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 43: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 44: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 45: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 46: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 47: Unused */ - 0x0, /* External 0: */ - 0x0, /* External 1: */ - 0x0, /* External 2: */ - 0x0, /* External 3: */ - 0x0, /* External 4: */ - 0x0, /* External 5: */ - 0x0, /* External 6: */ - 0x0, /* External 7: */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 8: Pixis FPGA */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* External 9: ULI 8259 INTR Cascade */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 10: Quad ETH PHY */ - 0x0, /* External 11: */ - 0x0, - 0x0, - 0x0, - 0x0, -}; - +static void mpc86xx_8259_cascade(unsigned int irq, struct irq_desc *desc, + struct pt_regs *regs) +{ + unsigned int cascade_irq = i8259_irq(regs); + if (cascade_irq != NO_IRQ) + generic_handle_irq(cascade_irq, regs); + desc->chip->eoi(irq); +} void __init mpc86xx_hpcn_init_irq(void) { struct mpic *mpic1; + struct device_node *np, *cascade_node = NULL; + int cascade_irq; phys_addr_t openpic_paddr; + np = of_find_node_by_type(NULL, "open-pic"); + if (np == NULL) + return; + /* Determine the Physical Address of the OpenPIC regs */ openpic_paddr = get_immrbase() + MPC86xx_OPENPIC_OFFSET; /* Alloc mpic structure and per isu has 16 INT entries. */ - mpic1 = mpic_alloc(openpic_paddr, + mpic1 = mpic_alloc(np, openpic_paddr, MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN, - 16, MPC86xx_OPENPIC_IRQ_OFFSET, 0, 250, - mpc86xx_hpcn_openpic_initsenses, - sizeof(mpc86xx_hpcn_openpic_initsenses), + 16, NR_IRQS - 4, " MPIC "); BUG_ON(mpic1 == NULL); + mpic_assign_isu(mpic1, 0, openpic_paddr + 0x10000); + /* 48 Internal Interrupts */ - mpic_assign_isu(mpic1, 0, openpic_paddr + 0x10200); - mpic_assign_isu(mpic1, 1, openpic_paddr + 0x10400); - mpic_assign_isu(mpic1, 2, openpic_paddr + 0x10600); + mpic_assign_isu(mpic1, 1, openpic_paddr + 0x10200); + mpic_assign_isu(mpic1, 2, openpic_paddr + 0x10400); + mpic_assign_isu(mpic1, 3, openpic_paddr + 0x10600); - /* 16 External interrupts */ - mpic_assign_isu(mpic1, 3, openpic_paddr + 0x10000); + /* 16 External interrupts + * Moving them from [0 - 15] to [64 - 79] + */ + mpic_assign_isu(mpic1, 4, openpic_paddr + 0x10000); mpic_init(mpic1); #ifdef CONFIG_PCI - mpic_setup_cascade(MPC86xx_IRQ_EXT9, i8259_irq_cascade, NULL); - i8259_init(0, I8259_OFFSET); -#endif -} + /* Initialize i8259 controller */ + for_each_node_by_type(np, "interrupt-controller") + if (device_is_compatible(np, "chrp,iic")) { + cascade_node = np; + break; + } + if (cascade_node == NULL) { + printk(KERN_DEBUG "mpc86xxhpcn: no ISA interrupt controller\n"); + return; + } + cascade_irq = irq_of_parse_and_map(cascade_node, 0); + if (cascade_irq == NO_IRQ) { + printk(KERN_ERR "mpc86xxhpcn: failed to map cascade interrupt"); + return; + } + DBG("mpc86xxhpcn: cascade mapped to irq %d\n", cascade_irq); + i8259_init(cascade_node, 0); + set_irq_chained_handler(cascade_irq, mpc86xx_8259_cascade); +#endif +} #ifdef CONFIG_PCI -/* - * interrupt routing - */ -int -mpc86xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) +enum pirq{PIRQA = 8, PIRQB, PIRQC, PIRQD, PIRQE, PIRQF, PIRQG, PIRQH}; +const unsigned char uli1575_irq_route_table[16] = { + 0, /* 0: Reserved */ + 0x8, /* 1: 0b1000 */ + 0, /* 2: Reserved */ + 0x2, /* 3: 0b0010 */ + 0x4, /* 4: 0b0100 */ + 0x5, /* 5: 0b0101 */ + 0x7, /* 6: 0b0111 */ + 0x6, /* 7: 0b0110 */ + 0, /* 8: Reserved */ + 0x1, /* 9: 0b0001 */ + 0x3, /* 10: 0b0011 */ + 0x9, /* 11: 0b1001 */ + 0xb, /* 12: 0b1011 */ + 0, /* 13: Reserved */ + 0xd, /* 14, 0b1101 */ + 0xf, /* 15, 0b1111 */ +}; + +static int __devinit +get_pci_irq_from_of(struct pci_controller *hose, int slot, int pin) { - static char pci_irq_table[][4] = { - /* - * PCI IDSEL/INTPIN->INTLINE - * A B C D - */ - {PIRQA, PIRQB, PIRQC, PIRQD}, /* IDSEL 17 -- PCI Slot 1 */ - {PIRQB, PIRQC, PIRQD, PIRQA}, /* IDSEL 18 -- PCI Slot 2 */ - {0, 0, 0, 0}, /* IDSEL 19 */ - {0, 0, 0, 0}, /* IDSEL 20 */ - {0, 0, 0, 0}, /* IDSEL 21 */ - {0, 0, 0, 0}, /* IDSEL 22 */ - {0, 0, 0, 0}, /* IDSEL 23 */ - {0, 0, 0, 0}, /* IDSEL 24 */ - {0, 0, 0, 0}, /* IDSEL 25 */ - {PIRQD, PIRQA, PIRQB, PIRQC}, /* IDSEL 26 -- PCI Bridge*/ - {PIRQC, 0, 0, 0}, /* IDSEL 27 -- LAN */ - {PIRQE, PIRQF, PIRQH, PIRQ7}, /* IDSEL 28 -- USB 1.1 */ - {PIRQE, PIRQF, PIRQG, 0}, /* IDSEL 29 -- Audio & Modem */ - {PIRQH, 0, 0, 0}, /* IDSEL 30 -- LPC & PMU*/ - {PIRQD, 0, 0, 0}, /* IDSEL 31 -- ATA */ - }; - - const long min_idsel = 17, max_idsel = 31, irqs_per_slot = 4; - return PCI_IRQ_TABLE_LOOKUP + I8259_OFFSET; + struct of_irq oirq; + u32 laddr[3]; + struct device_node *hosenode = hose ? hose->arch_data : NULL; + + if (!hosenode) return -EINVAL; + + laddr[0] = (hose->first_busno << 16) | (PCI_DEVFN(slot, 0) << 8); + laddr[1] = laddr[2] = 0; + of_irq_map_raw(hosenode, &pin, laddr, &oirq); + DBG("mpc86xx_hpcn: pci irq addr %x, slot %d, pin %d, irq %d\n", + laddr[0], slot, pin, oirq.specifier[0]); + return oirq.specifier[0]; } -static void __devinit quirk_ali1575(struct pci_dev *dev) +static void __devinit quirk_uli1575(struct pci_dev *dev) { unsigned short temp; + struct pci_controller *hose = pci_bus_to_host(dev->bus); + unsigned char irq2pin[16]; + unsigned long pirq_map_word = 0; + u32 irq; + int i; /* - * ALI1575 interrupts route table setup: + * ULI1575 interrupts route setup + */ + memset(irq2pin, 0, 16); /* Initialize default value 0 */ + + /* + * PIRQA -> PIRQD mapping read from OF-tree + * + * interrupts for PCI slot0 -- PIRQA / PIRQB / PIRQC / PIRQD + * PCI slot1 -- PIRQB / PIRQC / PIRQD / PIRQA + */ + for (i = 0; i < 4; i++){ + irq = get_pci_irq_from_of(hose, 17, i + 1); + if (irq > 0 && irq < 16) + irq2pin[irq] = PIRQA + i; + else + printk(KERN_WARNING "ULI1575 device" + "(slot %d, pin %d) irq %d is invalid.\n", + 17, i, irq); + } + + /* + * PIRQE -> PIRQF mapping set manually * * IRQ pin IRQ# - * PIRQA ---- 3 - * PIRQB ---- 4 - * PIRQC ---- 5 - * PIRQD ---- 6 * PIRQE ---- 9 * PIRQF ---- 10 * PIRQG ---- 11 * PIRQH ---- 12 - * - * interrupts for PCI slot0 -- PIRQA / PIRQB / PIRQC / PIRQD - * PCI slot1 -- PIRQB / PIRQC / PIRQD / PIRQA */ - pci_write_config_dword(dev, 0x48, 0xb9317542); + for (i = 0; i < 4; i++) irq2pin[i + 9] = PIRQE + i; + + /* Set IRQ-PIRQ Mapping to ULI1575 */ + for (i = 0; i < 16; i++) + if (irq2pin[i]) + pirq_map_word |= (uli1575_irq_route_table[i] & 0xf) + << ((irq2pin[i] - PIRQA) * 4); - /* USB 1.1 OHCI controller 1, interrupt: PIRQE */ - pci_write_config_byte(dev, 0x86, 0x0c); + /* ULI1575 IRQ mapping conf register default value is 0xb9317542 */ + DBG("Setup ULI1575 IRQ mapping configuration register value = 0x%x\n", + pirq_map_word); + pci_write_config_dword(dev, 0x48, pirq_map_word); - /* USB 1.1 OHCI controller 2, interrupt: PIRQF */ - pci_write_config_byte(dev, 0x87, 0x0d); +#define ULI1575_SET_DEV_IRQ(slot, pin, reg) \ + do { \ + int irq; \ + irq = get_pci_irq_from_of(hose, slot, pin); \ + if (irq > 0 && irq < 16) \ + pci_write_config_byte(dev, reg, irq2pin[irq]); \ + else \ + printk(KERN_WARNING "ULI1575 device" \ + "(slot %d, pin %d) irq %d is invalid.\n", \ + slot, pin, irq); \ + } while(0) - /* USB 1.1 OHCI controller 3, interrupt: PIRQH */ - pci_write_config_byte(dev, 0x88, 0x0f); + /* USB 1.1 OHCI controller 1, slot 28, pin 1 */ + ULI1575_SET_DEV_IRQ(28, 1, 0x86); - /* USB 2.0 controller, interrupt: PIRQ7 */ - pci_write_config_byte(dev, 0x74, 0x06); + /* USB 1.1 OHCI controller 2, slot 28, pin 2 */ + ULI1575_SET_DEV_IRQ(28, 2, 0x87); - /* Audio controller, interrupt: PIRQE */ - pci_write_config_byte(dev, 0x8a, 0x0c); + /* USB 1.1 OHCI controller 3, slot 28, pin 3 */ + ULI1575_SET_DEV_IRQ(28, 3, 0x88); - /* Modem controller, interrupt: PIRQF */ - pci_write_config_byte(dev, 0x8b, 0x0d); + /* USB 2.0 controller, slot 28, pin 4 */ + irq = get_pci_irq_from_of(hose, 28, 4); + if (irq >= 0 && irq <=15) + pci_write_config_dword(dev, 0x74, uli1575_irq_route_table[irq]); - /* HD audio controller, interrupt: PIRQG */ - pci_write_config_byte(dev, 0x8c, 0x0e); + /* Audio controller, slot 29, pin 1 */ + ULI1575_SET_DEV_IRQ(29, 1, 0x8a); - /* Serial ATA interrupt: PIRQD */ - pci_write_config_byte(dev, 0x8d, 0x0b); + /* Modem controller, slot 29, pin 2 */ + ULI1575_SET_DEV_IRQ(29, 2, 0x8b); - /* SMB interrupt: PIRQH */ - pci_write_config_byte(dev, 0x8e, 0x0f); + /* HD audio controller, slot 29, pin 3 */ + ULI1575_SET_DEV_IRQ(29, 3, 0x8c); - /* PMU ACPI SCI interrupt: PIRQH */ - pci_write_config_byte(dev, 0x8f, 0x0f); + /* SMB interrupt: slot 30, pin 1 */ + ULI1575_SET_DEV_IRQ(30, 1, 0x8e); + + /* PMU ACPI SCI interrupt: slot 30, pin 2 */ + ULI1575_SET_DEV_IRQ(30, 2, 0x8f); + + /* Serial ATA interrupt: slot 31, pin 1 */ + ULI1575_SET_DEV_IRQ(31, 1, 0x8d); /* Primary PATA IDE IRQ: 14 * Secondary PATA IDE IRQ: 15 */ - pci_write_config_byte(dev, 0x44, 0x3d); - pci_write_config_byte(dev, 0x75, 0x0f); + pci_write_config_byte(dev, 0x44, 0x30 | uli1575_irq_route_table[14]); + pci_write_config_byte(dev, 0x75, uli1575_irq_route_table[15]); /* Set IRQ14 and IRQ15 to legacy IRQs */ pci_read_config_word(dev, 0x46, &temp); @@ -264,6 +282,8 @@ static void __devinit quirk_ali1575(struct pci_dev *dev) */ outb(0xfa, 0x4d0); outb(0x1e, 0x4d1); + +#undef ULI1575_SET_DEV_IRQ } static void __devinit quirk_uli5288(struct pci_dev *dev) @@ -306,7 +326,7 @@ static void __devinit early_uli5249(struct pci_dev *dev) dev->class |= 0x1; } -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x1575, quirk_ali1575); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x1575, quirk_uli1575); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5288, quirk_uli5288); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229, quirk_uli5229); DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AL, 0x5249, early_uli5249); @@ -337,8 +357,6 @@ mpc86xx_hpcn_setup_arch(void) for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) add_bridge(np); - ppc_md.pci_swizzle = common_swizzle; - ppc_md.pci_map_irq = mpc86xx_map_irq; ppc_md.pci_exclude_device = mpc86xx_exclude_device; #endif @@ -377,6 +395,15 @@ mpc86xx_hpcn_show_cpuinfo(struct seq_file *m) } +void __init mpc86xx_hpcn_pcibios_fixup(void) +{ + struct pci_dev *dev = NULL; + + for_each_pci_dev(dev) + pci_read_irq_line(dev); +} + + /* * Called very early, device-tree isn't unflattened */ @@ -431,6 +458,7 @@ define_machine(mpc86xx_hpcn) { .setup_arch = mpc86xx_hpcn_setup_arch, .init_IRQ = mpc86xx_hpcn_init_irq, .show_cpuinfo = mpc86xx_hpcn_show_cpuinfo, + .pcibios_fixup = mpc86xx_hpcn_pcibios_fixup, .get_irq = mpic_get_irq, .restart = mpc86xx_restart, .time_init = mpc86xx_time_init, diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c index 12b65609c07..ef10bcf2d94 100644 --- a/arch/powerpc/sysdev/fsl_soc.c +++ b/arch/powerpc/sysdev/fsl_soc.c @@ -85,11 +85,8 @@ static int __init gfar_mdio_of_init(void) mdio_data.irq[k] = -1; while ((child = of_get_next_child(np, child)) != NULL) { - if (child->n_intrs) { - u32 *id = - (u32 *) get_property(child, "reg", NULL); - mdio_data.irq[*id] = child->intrs[0].line; - } + u32 *id = get_property(child, "reg", NULL); + mdio_data.irq[*id] = irq_of_parse_and_map(child, 0); } ret = @@ -131,6 +128,7 @@ static int __init gfar_of_init(void) char *model; void *mac_addr; phandle *ph; + int n_res = 1; memset(r, 0, sizeof(r)); memset(&gfar_data, 0, sizeof(gfar_data)); @@ -139,8 +137,7 @@ static int __init gfar_of_init(void) if (ret) goto err; - r[1].start = np->intrs[0].line; - r[1].end = np->intrs[0].line; + r[1].start = r[1].end = irq_of_parse_and_map(np, 0); r[1].flags = IORESOURCE_IRQ; model = get_property(np, "model", NULL); @@ -150,19 +147,19 @@ static int __init gfar_of_init(void) r[1].name = gfar_tx_intr; r[2].name = gfar_rx_intr; - r[2].start = np->intrs[1].line; - r[2].end = np->intrs[1].line; + r[2].start = r[2].end = irq_of_parse_and_map(np, 1); r[2].flags = IORESOURCE_IRQ; r[3].name = gfar_err_intr; - r[3].start = np->intrs[2].line; - r[3].end = np->intrs[2].line; + r[3].start = r[3].end = irq_of_parse_and_map(np, 2); r[3].flags = IORESOURCE_IRQ; + + n_res += 2; } gfar_dev = platform_device_register_simple("fsl-gianfar", i, &r[0], - np->n_intrs + 1); + n_res + 1); if (IS_ERR(gfar_dev)) { ret = PTR_ERR(gfar_dev); @@ -259,8 +256,7 @@ static int __init fsl_i2c_of_init(void) if (ret) goto err; - r[1].start = np->intrs[0].line; - r[1].end = np->intrs[0].line; + r[1].start = r[1].end = irq_of_parse_and_map(np, 0); r[1].flags = IORESOURCE_IRQ; i2c_dev = platform_device_register_simple("fsl-i2c", i, r, 2); @@ -396,8 +392,7 @@ static int __init fsl_usb_of_init(void) if (ret) goto err; - r[1].start = np->intrs[0].line; - r[1].end = np->intrs[0].line; + r[1].start = r[1].end = irq_of_parse_and_map(np, 0); r[1].flags = IORESOURCE_IRQ; usb_dev_mph = @@ -445,8 +440,7 @@ static int __init fsl_usb_of_init(void) if (ret) goto unreg_mph; - r[1].start = np->intrs[0].line; - r[1].end = np->intrs[0].line; + r[1].start = r[1].end = irq_of_parse_and_map(np, 0); r[1].flags = IORESOURCE_IRQ; usb_dev_dr = -- cgit v1.2.3 From aa74a30be971c632d734e487df42278b1cf85151 Mon Sep 17 00:00:00 2001 From: Andy Fleming Date: Mon, 21 Aug 2006 14:29:28 -0500 Subject: [POWERPC] Fix FEC node in 8540 ADS dts * Fixed the FEC node, and its accompanying PHY * Fixed a spacing issue in the PIC node Signed-off-by: Paul Mackerras --- arch/powerpc/boot/dts/mpc8540ads.dts | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/boot/dts/mpc8540ads.dts b/arch/powerpc/boot/dts/mpc8540ads.dts index 93d2c2de656..5f41c1f7a5f 100644 --- a/arch/powerpc/boot/dts/mpc8540ads.dts +++ b/arch/powerpc/boot/dts/mpc8540ads.dts @@ -83,11 +83,11 @@ reg = <1>; device_type = "ethernet-phy"; }; - ethernet-phy@2 { - linux,phandle = <2452002>; + ethernet-phy@3 { + linux,phandle = <2452003>; interrupt-parent = <40000>; interrupts = <37 1>; - reg = <2>; + reg = <3>; device_type = "ethernet-phy"; }; }; @@ -124,14 +124,14 @@ #address-cells = <1>; #size-cells = <0>; device_type = "network"; - model = "TSEC"; + model = "FEC"; compatible = "gianfar"; reg = <26000 1000>; address = [ 00 E0 0C 00 73 02 ]; local-mac-address = [ 00 E0 0C 00 73 02 ]; interrupts = <19 2>; interrupt-parent = <40000>; - phy-handle = <2452002>; + phy-handle = <2452003>; }; serial@4500 { @@ -251,7 +251,7 @@ built-in; compatible = "chrp,open-pic"; device_type = "open-pic"; - big-endian; + big-endian; }; }; }; -- cgit v1.2.3 From 5db9fa9593e2ff69f2b95f9d59229dc4faaa564d Mon Sep 17 00:00:00 2001 From: Nathan Lynch Date: Tue, 22 Aug 2006 20:36:05 -0500 Subject: [POWERPC] Fix gettimeofday inaccuracies There are two problems in the powerpc gettimeofday code which can cause incorrect results to be returned. The first is that there is a race between do_gettimeofday and the timer interrupt: 1. do_gettimeofday does get_tb() 2. decrementer exception on boot cpu which runs timer_recalc_offset, which also samples the timebase and updates the do_gtod structure with a greater timebase value. 3. do_gettimeofday calls __do_gettimeofday, which leads to the negative result from tb_val - temp_varp->tb_orig_stamp. The second is caused by taking the boot cpu offline, which can cause the value of tb_last_jiffy to be increased past the currently available timebase, causing the same underflow as above. [paulus@samba.org - define and use data_barrier() instead of mb().] Signed-off-by: Nathan Lynch Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/time.c | 25 +++++++++++++++++-------- 1 file changed, 17 insertions(+), 8 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c index 774c0a3c501..18e59e43d2b 100644 --- a/arch/powerpc/kernel/time.c +++ b/arch/powerpc/kernel/time.c @@ -417,7 +417,7 @@ static __inline__ void timer_check_rtc(void) /* * This version of gettimeofday has microsecond resolution. */ -static inline void __do_gettimeofday(struct timeval *tv, u64 tb_val) +static inline void __do_gettimeofday(struct timeval *tv) { unsigned long sec, usec; u64 tb_ticks, xsec; @@ -431,7 +431,12 @@ static inline void __do_gettimeofday(struct timeval *tv, u64 tb_val) * without a divide (and in fact, without a multiply) */ temp_varp = do_gtod.varp; - tb_ticks = tb_val - temp_varp->tb_orig_stamp; + + /* Sampling the time base must be done after loading + * do_gtod.varp in order to avoid racing with update_gtod. + */ + data_barrier(temp_varp); + tb_ticks = get_tb() - temp_varp->tb_orig_stamp; temp_tb_to_xs = temp_varp->tb_to_xs; temp_stamp_xsec = temp_varp->stamp_xsec; xsec = temp_stamp_xsec + mulhdu(tb_ticks, temp_tb_to_xs); @@ -464,7 +469,7 @@ void do_gettimeofday(struct timeval *tv) tv->tv_usec = usec; return; } - __do_gettimeofday(tv, get_tb()); + __do_gettimeofday(tv); } EXPORT_SYMBOL(do_gettimeofday); @@ -650,6 +655,7 @@ void timer_interrupt(struct pt_regs * regs) int next_dec; int cpu = smp_processor_id(); unsigned long ticks; + u64 tb_next_jiffy; #ifdef CONFIG_PPC32 if (atomic_read(&ppc_n_lost_interrupts) != 0) @@ -691,11 +697,14 @@ void timer_interrupt(struct pt_regs * regs) continue; write_seqlock(&xtime_lock); - tb_last_jiffy += tb_ticks_per_jiffy; - tb_last_stamp = per_cpu(last_jiffy, cpu); - do_timer(regs); - timer_recalc_offset(tb_last_jiffy); - timer_check_rtc(); + tb_next_jiffy = tb_last_jiffy + tb_ticks_per_jiffy; + if (per_cpu(last_jiffy, cpu) >= tb_next_jiffy) { + tb_last_jiffy = tb_next_jiffy; + tb_last_stamp = per_cpu(last_jiffy, cpu); + do_timer(regs); + timer_recalc_offset(tb_last_jiffy); + timer_check_rtc(); + } write_sequnlock(&xtime_lock); } -- cgit v1.2.3 From 6cdd2bdfb9e2449f1c8a0f729cdf9cfd733dd63f Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Wed, 23 Aug 2006 11:45:12 +1000 Subject: [POWERPC] Fix BootX booting with an initrd The bootx_init.c trampoline didn't properly add the ramdisk to the "reserve map" (list of reserved areas of memory), thus causing all sorts of failures when using BootX with an initrd. Also fixes a possible problem if the ramdisk is located before the device-tree passed by BootX. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/powermac/bootx_init.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/powermac/bootx_init.c b/arch/powerpc/platforms/powermac/bootx_init.c index 6a026c733f6..9d73d0234c5 100644 --- a/arch/powerpc/platforms/powermac/bootx_init.c +++ b/arch/powerpc/platforms/powermac/bootx_init.c @@ -411,8 +411,15 @@ static unsigned long __init bootx_flatten_dt(unsigned long start) DBG("End of boot params: %x\n", mem_end); rsvmap[0] = mem_start; rsvmap[1] = mem_end; - rsvmap[2] = 0; - rsvmap[3] = 0; + if (bootx_info->ramDisk) { + rsvmap[2] = ((unsigned long)bootx_info) + bootx_info->ramDisk; + rsvmap[3] = rsvmap[2] + bootx_info->ramDiskSize; + rsvmap[4] = 0; + rsvmap[5] = 0; + } else { + rsvmap[2] = 0; + rsvmap[3] = 0; + } return (unsigned long)hdr; } @@ -543,12 +550,12 @@ void __init bootx_init(unsigned long r3, unsigned long r4) */ if (bi->version < 5) { space = bi->deviceTreeOffset + bi->deviceTreeSize; - if (bi->ramDisk) + if (bi->ramDisk >= space) space = bi->ramDisk + bi->ramDiskSize; } else space = bi->totalParamsSize; - bootx_printf("Total space used by parameters & ramdisk: %x \n", space); + bootx_printf("Total space used by parameters & ramdisk: 0x%x \n", space); /* New BootX will have flushed all TLBs and enters kernel with * MMU switched OFF, so this should not be useful anymore. -- cgit v1.2.3 From c4342ff92bed26f2e0e3543a9f0fdc5f3a29b8fd Mon Sep 17 00:00:00 2001 From: Zang Roy-r61911 Date: Wed, 23 Aug 2006 10:19:50 +0800 Subject: [POWERPC] Update mpc7448hpc2 board irq support using device tree The patch rewrites mpc7448hpc2 board irq support according to the new mpic device tree interface. Signed-off-by: Roy Zang Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c | 73 ++++++++--------------- arch/powerpc/sysdev/tsi108_dev.c | 10 ++-- arch/powerpc/sysdev/tsi108_pci.c | 21 ++++--- 3 files changed, 42 insertions(+), 62 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c index d7a4fc7ca23..ed00ed2455d 100644 --- a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c +++ b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c @@ -1,7 +1,7 @@ /* * mpc7448_hpc2.c * - * Board setup routines for the Freescale Taiga platform + * Board setup routines for the Freescale mpc7448hpc2(taiga) platform * * Author: Jacob Pan * jacob.pan@freescale.com @@ -12,10 +12,10 @@ * * Copyright 2004-2006 Freescale Semiconductor, Inc. * - * This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. */ #include @@ -62,43 +62,8 @@ pci_dram_offset = MPC7448_HPC2_PCI_MEM_OFFSET; extern int tsi108_setup_pci(struct device_node *dev); extern void _nmask_and_or_msr(unsigned long nmask, unsigned long or_val); extern void tsi108_pci_int_init(void); -extern int tsi108_irq_cascade(struct pt_regs *regs, void *unused); - -/* - * Define all of the IRQ senses and polarities. Taken from the - * mpc7448hpc manual. - * Note: Likely, this table and the following function should be - * obtained and derived from the OF Device Tree. - */ - -static u_char mpc7448_hpc2_pic_initsenses[] __initdata = { - /* External on-board sources */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* INT[0] XINT0 from FPGA */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* INT[1] XINT1 from FPGA */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* INT[2] PHY_INT from both GIGE */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* INT[3] RESERVED */ - /* Internal Tsi108/109 interrupt sources */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* DMA0 */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* DMA1 */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* DMA2 */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* DMA3 */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* UART0 */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* UART1 */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* I2C */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* GPIO */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* GIGE0 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* GIGE1 */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* HLP */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* SDC */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Processor IF */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* PCI/X block */ -}; +extern void tsi108_irq_cascade(unsigned int irq, struct irq_desc *desc, + struct pt_regs *regs); int mpc7448_hpc2_exclude_device(u_char bus, u_char devfn) { @@ -229,6 +194,8 @@ static void __init mpc7448_hpc2_init_IRQ(void) { struct mpic *mpic; phys_addr_t mpic_paddr = 0; + unsigned int cascade_pci_irq; + struct device_node *tsi_pci; struct device_node *tsi_pic; tsi_pic = of_find_node_by_type(NULL, "open-pic"); @@ -246,24 +213,31 @@ static void __init mpc7448_hpc2_init_IRQ(void) DBG("%s: tsi108pic phys_addr = 0x%x\n", __FUNCTION__, (u32) mpic_paddr); - mpic = mpic_alloc(mpic_paddr, + mpic = mpic_alloc(tsi_pic, mpic_paddr, MPIC_PRIMARY | MPIC_BIG_ENDIAN | MPIC_WANTS_RESET | MPIC_SPV_EOI | MPIC_MOD_ID(MPIC_ID_TSI108), 0, /* num_sources used */ - TSI108_IRQ_BASE, 0, /* num_sources used */ - NR_IRQS - 4 /* XXXX */, - mpc7448_hpc2_pic_initsenses, - sizeof(mpc7448_hpc2_pic_initsenses), "Tsi108_PIC"); + "Tsi108_PIC"); BUG_ON(mpic == NULL); /* XXXX */ - mpic_init(mpic); - mpic_setup_cascade(IRQ_TSI108_PCI, tsi108_irq_cascade, mpic); + + tsi_pci = of_find_node_by_type(NULL, "pci"); + if (tsi_pci == 0) { + printk("%s: No tsi108 pci node found !\n", __FUNCTION__); + return; + } + + cascade_pci_irq = irq_of_parse_and_map(tsi_pci, 0); + set_irq_data(cascade_pci_irq, mpic); + set_irq_chained_handler(cascade_pci_irq, tsi108_irq_cascade); + tsi108_pci_int_init(); /* Configure MPIC outputs to CPU0 */ tsi108_write_reg(TSI108_MPIC_OFFSET + 0x30c, 0); + of_node_put(tsi_pic); } void mpc7448_hpc2_show_cpuinfo(struct seq_file *m) @@ -320,6 +294,7 @@ static int mpc7448_machine_check_exception(struct pt_regs *regs) return 0; } + define_machine(mpc7448_hpc2){ .name = "MPC7448 HPC2", .probe = mpc7448_hpc2_probe, diff --git a/arch/powerpc/sysdev/tsi108_dev.c b/arch/powerpc/sysdev/tsi108_dev.c index 26a0cc820cd..f3038461d4c 100644 --- a/arch/powerpc/sysdev/tsi108_dev.c +++ b/arch/powerpc/sysdev/tsi108_dev.c @@ -93,13 +93,15 @@ static int __init tsi108_eth_of_init(void) goto err; r[1].name = "tx"; - r[1].start = np->intrs[0].line; - r[1].end = np->intrs[0].line; + r[1].start = irq_of_parse_and_map(np, 0); + r[1].end = irq_of_parse_and_map(np, 0); r[1].flags = IORESOURCE_IRQ; + DBG("%s: name:start->end = %s:0x%lx-> 0x%lx\n", + __FUNCTION__,r[1].name, r[1].start, r[1].end); tsi_eth_dev = platform_device_register_simple("tsi-ethernet", i, &r[0], - np->n_intrs + 1); + 1); if (IS_ERR(tsi_eth_dev)) { ret = PTR_ERR(tsi_eth_dev); @@ -127,7 +129,7 @@ static int __init tsi108_eth_of_init(void) tsi_eth_data.regs = r[0].start; tsi_eth_data.phyregs = res.start; tsi_eth_data.phy = *phy_id; - tsi_eth_data.irq_num = np->intrs[0].line; + tsi_eth_data.irq_num = irq_of_parse_and_map(np, 0); of_node_put(phy); ret = platform_device_add_data(tsi_eth_dev, &tsi_eth_data, diff --git a/arch/powerpc/sysdev/tsi108_pci.c b/arch/powerpc/sysdev/tsi108_pci.c index 3265d54c82e..2ab06ed3ae7 100644 --- a/arch/powerpc/sysdev/tsi108_pci.c +++ b/arch/powerpc/sysdev/tsi108_pci.c @@ -26,7 +26,6 @@ #include #include - #include #include #include @@ -228,7 +227,7 @@ int __init tsi108_setup_pci(struct device_node *dev) (hose)->ops = &tsi108_direct_pci_ops; - printk(KERN_INFO "Found tsi108 PCI host bridge at 0x%08lx. " + printk(KERN_INFO "Found tsi108 PCI host bridge at 0x%08x. " "Firmware bus number: %d->%d\n", rsrc.start, hose->first_busno, hose->last_busno); @@ -278,7 +277,7 @@ static void init_pci_source(void) mb(); } -static inline int get_pci_source(void) +static inline unsigned int get_pci_source(void) { u_int temp = 0; int irq = -1; @@ -371,12 +370,12 @@ static void tsi108_pci_irq_end(u_int irq) * Interrupt controller descriptor for cascaded PCI interrupt controller. */ -struct hw_interrupt_type tsi108_pci_irq = { +static struct irq_chip tsi108_pci_irq = { .typename = "tsi108_PCI_int", - .enable = tsi108_pci_irq_enable, - .disable = tsi108_pci_irq_disable, + .mask = tsi108_pci_irq_disable, .ack = tsi108_pci_irq_ack, .end = tsi108_pci_irq_end, + .unmask = tsi108_pci_irq_enable, }; /* @@ -399,14 +398,18 @@ void __init tsi108_pci_int_init(void) DBG("Tsi108_pci_int_init: initializing PCI interrupts\n"); for (i = 0; i < NUM_PCI_IRQS; i++) { - irq_desc[i + IRQ_PCI_INTAD_BASE].handler = &tsi108_pci_irq; + irq_desc[i + IRQ_PCI_INTAD_BASE].chip = &tsi108_pci_irq; irq_desc[i + IRQ_PCI_INTAD_BASE].status |= IRQ_LEVEL; } init_pci_source(); } -int tsi108_irq_cascade(struct pt_regs *regs, void *unused) +void tsi108_irq_cascade(unsigned int irq, struct irq_desc *desc, + struct pt_regs *regs) { - return get_pci_source(); + unsigned int cascade_irq = get_pci_source(); + if (cascade_irq != NO_IRQ) + generic_handle_irq(cascade_irq, regs); + desc->chip->eoi(irq); } -- cgit v1.2.3 From be9633e96a9e33ab97776bb6874244fa4db6987d Mon Sep 17 00:00:00 2001 From: Zang Roy-r61911 Date: Wed, 23 Aug 2006 10:20:27 +0800 Subject: [POWERPC] Pass UPIO_TSI flag to 8259 serial driver The patch passes the UPIO_TSI flag to general 8259 serial driver Signed-off-by: Roy Zang Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/legacy_serial.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c index 359ab89748e..40a39291861 100644 --- a/arch/powerpc/kernel/legacy_serial.c +++ b/arch/powerpc/kernel/legacy_serial.c @@ -115,6 +115,7 @@ static int __init add_legacy_soc_port(struct device_node *np, u64 addr; u32 *addrp; upf_t flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ; + struct device_node *tsi = of_get_parent(np); /* We only support ports that have a clock frequency properly * encoded in the device-tree. @@ -134,7 +135,10 @@ static int __init add_legacy_soc_port(struct device_node *np, /* Add port, irq will be dealt with later. We passed a translated * IO port value. It will be fixed up later along with the irq */ - return add_legacy_port(np, -1, UPIO_MEM, addr, addr, NO_IRQ, flags, 0); + if (tsi && !strcmp(tsi->type, "tsi-bridge")) + return add_legacy_port(np, -1, UPIO_TSI, addr, addr, NO_IRQ, flags, 0); + else + return add_legacy_port(np, -1, UPIO_MEM, addr, addr, NO_IRQ, flags, 0); } static int __init add_legacy_isa_port(struct device_node *np, @@ -464,7 +468,7 @@ static int __init serial_dev_init(void) fixup_port_irq(i, np, port); if (port->iotype == UPIO_PORT) fixup_port_pio(i, np, port); - if (port->iotype == UPIO_MEM) + if ((port->iotype == UPIO_MEM) || (port->iotype == UPIO_TSI)) fixup_port_mmio(i, np, port); } -- cgit v1.2.3 From 87589f08beaec3e1f8a3af0c72406c845f706821 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Wed, 23 Aug 2006 16:58:39 +1000 Subject: [POWERPC] Correct masks used in emulating some instructions When we get an illegal instruction exception, we check to see whether the instruction is one that we emulate for the user program. Some of the masks we use in checking whether the offending instruction is one we care about didn't have the top bit set, which is the MSB of the major opcode. Thus some undefined opcodes could get emulated as other (defined but unimplemented) instructions. This corrects the masks. Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/traps.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c index 125761aaa40..4d0b4e74d57 100644 --- a/arch/powerpc/kernel/traps.c +++ b/arch/powerpc/kernel/traps.c @@ -585,14 +585,14 @@ static void parse_fpe(struct pt_regs *regs) #define INST_MFSPR_PVR_MASK 0xfc1fffff #define INST_DCBA 0x7c0005ec -#define INST_DCBA_MASK 0x7c0007fe +#define INST_DCBA_MASK 0xfc0007fe #define INST_MCRXR 0x7c000400 -#define INST_MCRXR_MASK 0x7c0007fe +#define INST_MCRXR_MASK 0xfc0007fe #define INST_STRING 0x7c00042a -#define INST_STRING_MASK 0x7c0007fe -#define INST_STRING_GEN_MASK 0x7c00067e +#define INST_STRING_MASK 0xfc0007fe +#define INST_STRING_GEN_MASK 0xfc00067e #define INST_LSWI 0x7c0004aa #define INST_LSWX 0x7c00042a #define INST_STSWI 0x7c0005aa -- cgit v1.2.3 From d55c4a76f26160482158cd43788dcfc96a320a4f Mon Sep 17 00:00:00 2001 From: Li Yang Date: Wed, 23 Aug 2006 14:13:08 +0800 Subject: [POWERPC] Fix compile problem without CONFIG_PCI Compile fails without defining CONFIG_PCI. The patch fix this. [paulus@samba.org: Moved of_irq_pci_swizzle so we only need one #ifdef] Signed-off-by: Li Yang Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/prom_parse.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/prom_parse.c b/arch/powerpc/kernel/prom_parse.c index 6a7e997c401..11052c212ad 100644 --- a/arch/powerpc/kernel/prom_parse.c +++ b/arch/powerpc/kernel/prom_parse.c @@ -598,11 +598,6 @@ static struct device_node *of_irq_find_parent(struct device_node *child) return p; } -static u8 of_irq_pci_swizzle(u8 slot, u8 pin) -{ - return (((pin - 1) + slot) % 4) + 1; -} - /* This doesn't need to be called if you don't have any special workaround * flags to pass */ @@ -891,6 +886,12 @@ int of_irq_map_one(struct device_node *device, int index, struct of_irq *out_irq } EXPORT_SYMBOL_GPL(of_irq_map_one); +#ifdef CONFIG_PCI +static u8 of_irq_pci_swizzle(u8 slot, u8 pin) +{ + return (((pin - 1) + slot) % 4) + 1; +} + int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq) { struct device_node *dn, *ppnode; @@ -967,4 +968,4 @@ int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq) return of_irq_map_raw(ppnode, &lspec, laddr, out_irq); } EXPORT_SYMBOL_GPL(of_irq_map_pci); - +#endif /* CONFIG_PCI */ -- cgit v1.2.3 From c9169f8747bb282cbe518132bf7d49755a00b6c1 Mon Sep 17 00:00:00 2001 From: Adam Litke Date: Fri, 18 Aug 2006 11:22:21 -0700 Subject: [POWERPC] hugepage BUG fix On Tue, 2006-08-15 at 08:22 -0700, Dave Hansen wrote: > kernel BUG in cache_free_debugcheck at mm/slab.c:2748! Alright, this one is only triggered when slab debugging is enabled. The slabs are assumed to be aligned on a HUGEPTE_TABLE_SIZE boundary. The free path makes use of this assumption and uses the lowest nibble to pass around an index into an array of kmem_cache pointers. With slab debugging turned on, the slab is still aligned, but the "working" object pointer is not. This would break the assumption above that a full nibble is available for the PGF_CACHENUM_MASK. The following patch reduces PGF_CACHENUM_MASK to cover only the two least significant bits, which is enough to cover the current number of 4 pgtable cache types. Then use this constant to mask out the appropriate part of the huge pte pointer. Signed-off-by: Adam Litke Signed-off-by: Andrew Morton Signed-off-by: Paul Mackerras --- arch/powerpc/mm/hugetlbpage.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c index 266b8b2ceac..5615acc2952 100644 --- a/arch/powerpc/mm/hugetlbpage.c +++ b/arch/powerpc/mm/hugetlbpage.c @@ -153,7 +153,7 @@ static void free_hugepte_range(struct mmu_gather *tlb, hugepd_t *hpdp) hpdp->pd = 0; tlb->need_flush = 1; pgtable_free_tlb(tlb, pgtable_free_cache(hugepte, HUGEPTE_CACHE_NUM, - HUGEPTE_TABLE_SIZE-1)); + PGF_CACHENUM_MASK)); } #ifdef CONFIG_PPC_64K_PAGES -- cgit v1.2.3