aboutsummaryrefslogtreecommitdiffstats
path: root/include
Commit message (Collapse)AuthorAgeFilesLines
* [IA64] Tollhouse HP: IA64 arch changesPrarit Bhargava2006-03-245-14/+20
| | | | | | | | | arch/ia64/sn and include/asm-ia64/sn changes required to support Tollhouse system PCI hotplug, fixes the ia64_sn_sysctl_ioboard_get call, and introduces the PRF_HOTPLUG_SUPPORT feature bit. Signed-off-by: Prarit Bhargava <prarit@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
* [IA64] cleanup dig_irq_initChen, Kenneth W2006-03-241-2/+0
| | | | | | | | dig_irq_init is equivalent to machvec_noop, no need to define another empty function. Signed-off-by: Ken Chen <kenneth.w.chen@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
* [IA64] MCA recovery: kernel context recovery tableRuss Anderson2006-03-241-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Memory errors encountered by user applications may surface when the CPU is running in kernel context. The current code will not attempt recovery if the MCA surfaces in kernel context (privilage mode 0). This patch adds a check for cases where the user initiated the load that surfaces in kernel interrupt code. An example is a user process lauching a load from memory and the data in memory had bad ECC. Before the bad data gets to the CPU register, and interrupt comes in. The code jumps to the IVT interrupt entry point and begins execution in kernel context. The process of saving the user registers (SAVE_REST) causes the bad data to be loaded into a CPU register, triggering the MCA. The MCA surfaces in kernel context, even though the load was initiated from user context. As suggested by David and Tony, this patch uses an exception table like approach, puting the tagged recovery addresses in a searchable table. One difference from the exception table is that MCAs do not surface in precise places (such as with a TLB miss), so instead of tagging specific instructions, address ranges are registers. A single macro is used to do the tagging, with the input parameter being the label of the starting address and the macro being the ending address. This limits clutter in the code. This patch only tags one spot, the interrupt ivt entry. Testing showed that spot to be a "heavy hitter" with MCAs surfacing while saving user registers. Other spots can be added as needed by adding a single macro. Signed-off-by: Russ Anderson (rja@sgi.com) Signed-off-by: Tony Luck <tony.luck@intel.com>
* [IA64] add init declaration to cpu initialization functionsChen, Kenneth W2006-03-221-1/+0
| | | | | | | Add init declaration to cpu initialization functions. Signed-off-by: Ken Chen <kenneth.w.chen@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
* [IA64] fix ia64 is_hugepage_only_rangeChen, Kenneth W2006-03-221-1/+1
| | | | | | | | | | | fix is_hugepage_only_range() definition to be "overlaps" instead of "within architectural restricted hugetlb address range". Simplify the ia64 specific code that used to use is_hugepage_only_range() to just check which region the address is in. Signed-off-by: Ken Chen <kenneth.w.chen@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/perex/alsaLinus Torvalds2006-03-2226-46/+59
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/perex/alsa: (124 commits) [ALSA] version 1.0.11rc4 [PATCH] Intruduce DMA_28BIT_MASK [ALSA] hda-codec - Add support for ASUS P4GPL-X [ALSA] hda-codec - Add support for HP nx9420 laptop [ALSA] Fix memory leaks in error path of control.c [ALSA] AMD Au1x00: AC'97 controller is memory mapped [ALSA] AMD Au1x00: fix DMA init/cleanup [ALSA] hda-codec - Fix generic auto-configurator [ALSA] hda-codec - Fix BIOS auto-configuration [ALSA] Fixes typos in Audiophile-USB.txt [ALSA] ice1712 - typo fixes for dxr_enable module option [ALSA] AMD Au1x00: make driver build after cleanup [ALSA] ice1712 - Fix wrong value types for enum items [ALSA] fix resource leak in usbmixer [ALSA] Fix gus_pcm dereference before NULL [ALSA] Fix seq_clientmgr dereferences before NULL check [ALSA] hda-codec - Fix for Samsung R65 and ASUS A6J [ALSA] hda-codec - Add support for VAIO FE550G and SZ110 [ALSA] usb-audio: add Maya44 mixer control names [ALSA] usb-audio: add Casio PL-40R support ...
| * [ALSA] version 1.0.11rc4Jaroslav Kysela2006-03-221-2/+2
| |
| * Merge with ↵Jaroslav Kysela2006-03-22117-898/+1810
| |\ | | | | | | | | | rsync://rsync.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
| * | [PATCH] Intruduce DMA_28BIT_MASKTobias Klauser2006-03-221-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch introduces the DMA_28BIT_MASK constant in dma-mapping.h ALSA drivers using this mask are changed to use the new constant. Signed-off-by: Tobias Klauser <tklauser@nuerscht.ch> Acked-by: Takashi Iwai <tiwai@suse.de> Acked-by: Jaroslav Kysela <perex@suse.cz>
| * | [ALSA] ac97 - Clean up obsolete workaroundsTakashi Iwai2006-03-221-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | Modules: AC97 Codec Clean up obsolete workarounds provided only for nm256. Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * | [ALSA] ac97 - Allow drivers to set static volume resolution tableTakashi Iwai2006-03-221-6/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | Modules: AC97 Codec Add the pointer to a static volume resolution table to ac97 template, so that the drivers can define the volume resolution, too. Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * | [ALSA] ac97 - Add support of static resolution tablesTakashi Iwai2006-03-221-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Modules: AC97 Codec Added the support of static resolution table support for codecs that the driver cannot probe the volume resolution properly. The table pointer should be set in each codec patch. Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * | [ALSA] ymfpci - make rear channel swap optionalJaroslav Kysela2006-03-221-4/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Modules: YMFPCI driver Added rear_swap module option / kernel parameter to configure the rear channel swapping. Default value is enable to make the AC3 passthrough working, but analog only users might revert the previous behaviour. Signed-off-by: Jaroslav Kysela <perex@suse.cz>
| * | [ALSA] semaphore -> mutex (PCI part)Ingo Molnar2006-03-224-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * | [ALSA] semaphore -> mutex (ISA part)Ingo Molnar2006-03-224-7/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * | [ALSA] semaphore -> mutex (driver part)Ingo Molnar2006-03-226-10/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * | [ALSA] semaphore -> mutex (core part)Ingo Molnar2006-03-228-12/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * | [ALSA] Fix snd_xxx_t typedefsTakashi Iwai2006-03-221-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | Modules: PXA Mainstone driver,CX88 driver,SAA7134 driver Replace snd_xxx_t typedefs with explicit structs. Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * | [ALSA] PCM midlevel & PCM OSS - make procfs & OSS plugin code optionalJaroslav Kysela2006-03-221-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Modules: ALSA Core,PCM Midlevel,ALSA<-OSS emulation,USB generic driver 1) The verbose procfs code for the PCM midlevel and usb audio can be removed now (more patches will follow). CONFIG_SND_VERBOSE_PROCFS 2) The PCM OSS plugin system can be also compiled optionaly. CONFIG_SND_PCM_OSS_PLUGINS Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivialLinus Torvalds2006-03-223-3/+3
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial: fixed path to moved file in include/linux/device.h Fix spelling in E1000_DISABLE_PACKET_SPLIT Kconfig description Documentation/dvb/get_dvb_firmware: fix firmware URL Documentation: Update to BUG-HUNTING Remove superfluous NOTIFY_COOKIE_LEN define add "tags" to .gitignore Fix "frist", "fisrt", typos fix rwlock usage example It's UTF-8
| * | | fixed path to moved file in include/linux/device.hRytchkov Alexey2006-03-221-1/+1
| | | | | | | | | | | | | | | | Signed-off-by: Adrian Bunk <bunk@stusta.de>
| * | | It's UTF-8Alexey Dobriyan2006-03-222-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix some comments to "UTF-8". Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
* | | | Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds2006-03-226-33/+64
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64]: Add a secondary TSB for hugepage mappings. [SPARC]: Respect vm_page_prot in io_remap_page_range().
| * | | | [SPARC64]: Add a secondary TSB for hugepage mappings.David S. Miller2006-03-225-30/+61
| | | | | | | | | | | | | | | | | | | | Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | [SPARC]: Respect vm_page_prot in io_remap_page_range().David S. Miller2006-03-221-3/+3
| | |_|/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make sure the callers do a pgprot_noncached() on vma->vm_page_prot. Pointed out by Hugh Dickens. Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds2006-03-224-5/+52
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [TG3]: Bump driver version and reldate. [TG3]: Skip phy power down on some devices [TG3]: Fix SRAM access during tg3_init_one() [X25]: dte facilities 32 64 ioctl conversion [X25]: allow ITU-T DTE facilities for x25 [X25]: fix kernel error message 64 bit kernel [X25]: ioctl conversion 32 bit user to 64 bit kernel [NET]: socket timestamp 32 bit handler for 64 bit kernel [NET]: allow 32 bit socket ioctl in 64 bit kernel [BLUETOOTH]: Return negative error constant
| * | | | [X25]: allow ITU-T DTE facilities for x25Shaun Pereira2006-03-222-4/+43
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Allows use of the optional user facility to insert ITU-T (http://www.itu.int/ITU-T/) specified DTE facilities in call set-up x25 packets. This feature is optional; no facilities will be added if the ioctl is not used, and call setup packet remains the same as before. If the ioctls provided by the patch are used, then a facility marker will be added to the x25 packet header so that the called dte address extension facility can be differentiated from other types of facilities (as described in the ITU-T X.25 recommendation) that are also allowed in the x25 packet header. Facility markers are made up of two octets, and may be present in the x25 packet headers of call-request, incoming call, call accepted, clear request, and clear indication packets. The first of the two octets represents the facility code field and is set to zero by this patch. The second octet of the marker represents the facility parameter field and is set to 0x0F because the marker will be inserted before ITU-T type DTE facilities. Since according to ITU-T X.25 Recommendation X.25(10/96)- 7.1 "All networks will support the facility markers with a facility parameter field set to all ones or to 00001111", therefore this patch should work with all x.25 networks. While there are many ITU-T DTE facilities, this patch implements only the called and calling address extension, with placeholders in the x25_dte_facilities structure for the rest of the facilities. Testing: This patch was tested using a cisco xot router connected on its serial ports to an X.25 network, and on its lan ports to a host running an xotd daemon. It is also possible to test this patch using an xotd daemon and an x25tap patch, where the xotd daemons work back-to-back without actually using an x.25 network. See www.fyonne.net for details on how to do this. Signed-off-by: Shaun Pereira <spereira@tusc.com.au> Acked-by: Andrew Hendry <ahendry@tusc.com.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | [NET]: socket timestamp 32 bit handler for 64 bit kernelShaun Pereira2006-03-211-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Get socket timestamp handler function that does not use the ioctl32_hash_table. Signed-off-by: Shaun Pereira <spereira@tusc.com.au> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | [NET]: allow 32 bit socket ioctl in 64 bit kernelShaun Pereira2006-03-211-0/+6
| |/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since the register_ioctl32_conversion() patch in the kernel is now obsolete, provide another method to allow 32 bit user space ioctls to reach the kernel. Signed-off-by: Shaun Pereira <spereira@tusc.com.au> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds2006-03-2211-30/+107
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (138 commits) [SCSI] libata: implement minimal transport template for ->eh_timed_out [SCSI] eliminate rphy allocation in favour of expander/end device allocation [SCSI] convert mptsas over to end_device/expander allocations [SCSI] allow displaying and setting of cache type via sysfs [SCSI] add scsi_mode_select to scsi_lib.c [SCSI] 3ware 9000 add big endian support [SCSI] qla2xxx: update MAINTAINERS [SCSI] scsi: move target_destroy call [SCSI] fusion - bump version [SCSI] fusion - expander hotplug suport in mptsas module [SCSI] fusion - exposing raid components in mptsas [SCSI] fusion - memory leak, and initializing fields [SCSI] fusion - exclosure misspelled [SCSI] fusion - cleanup mptsas event handling functions [SCSI] fusion - removing target_id/bus_id from the VirtDevice structure [SCSI] fusion - static fix's [SCSI] fusion - move some debug firmware event debug msgs to verbose level [SCSI] fusion - loginfo header update [SCSI] add scsi_reprobe_device [SCSI] megaraid_sas: fix extended timeout handling ...
| * | | | [SCSI] libata: implement minimal transport template for ->eh_timed_outTejun Heo2006-03-211-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SCSI midlayer has moved hostt->eh_timed_out to transport template. As libata doesn't need full-blown transport support yet, implement minimal transport for libata. No transport class or whatsoever, just empty transport template with ->eh_timed_out hook. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * | | | Merge ../linux-2.6James Bottomley2006-03-21157-1489/+5774
| |\ \ \ \ | | | |/ / | | |/| |
| * | | | [SCSI] eliminate rphy allocation in favour of expander/end device allocationJames Bottomley2006-03-191-5/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This allows the removal of the contained flag and also does a bit of class renaming (sas_rphy->sas_device). Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * | | | [SCSI] add scsi_mode_select to scsi_lib.cJames Bottomley2006-03-191-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This complements the scsi_mode_sense() function Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * | | | [SCSI] add scsi_reprobe_deviceJames Bottomley2006-03-141-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Original from Christoph Hellwig and Eric Moore. This version exports the scsi_reprobe_device() function as an inline. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * | | | Merge ../linux-2.6James Bottomley2006-03-1439-60/+165
| |\ \ \ \
| * | | | | [SCSI] drivers/base/bus.c - export reprobeMoore, Eric2006-03-141-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adding support for exposing hidden raid components for sg interface. The sdev->no_uld_attach flag will set set accordingly. The sas module supports adding/removing raid volumes using online storage management application interface. This patch was provided to me by Christoph Hellwig. Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * | | | | [SCSI] add preliminary expander support to the sas transport classJames Bottomley2006-03-141-0/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch makes expanders appear as labelled objects with properties in the SAS tree. I've also modified the phy code to make expander phys appear labelled by host number, expander number and phy index. So, for my current config, you see something like this in sysfs: /sys/class/scsi_host/host1/device/phy-1:4/expander-1:0/phy-1-0:12/rphy-1:0-12/target1:0:1 And the expander properties are: jejb@sparkweed> cd /sys/class/sas_expander/expander-1\:0/ jejb@sparkweed> for f in *; do echo -n $f ": "; cat $f; done component_id : 29024 component_revision_id : 4 component_vendor_id : VITESSE device : cat: device: Is a directory level : 0 product_id : VSC7160 Eval Brd product_rev : 4 uevent : cat: uevent: Permission denied vendor_id : VITESSE Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * | | | | [SCSI] FC transport : Avoid device offline cases by stalling aborts until ↵James Smart2006-03-132-14/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | device unblocked This moves the eh_timed_out functionality from the scsi_host_template to the transport_template. Given that this is now a transport function, the EH_RESET_TIMER case no longer caps the timer reschedulings. The transport guarantees that this is not an infinite condition. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * | | | | [SCSI] qla2xxx: Add ISP54xx support.andrew.vasquez@qlogic.com2006-03-121-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Chip is similar in form to our ISP24xx offering. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * | | | | [PATCH] convert aic94xx over to using the sas transport end deviceJames Bottomley2006-03-061-0/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Begin introducing the concept of sas remote devices that have an rphy embedded. The first one (this) is a simple end device. All that an end device really does is have port mode page parameters contained. The next and more complex piece will be expander remote devices. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * | | | | [SCSI] add 6.0 Gbit phy definitions to the sas transport classJames Bottomley2006-03-021-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I don't think these exist in silicon yet, but the aic94xx driver has a register setting for them. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * | | | | [SCSI] fix scsi process problems and clean up the target reap issuesJames Bottomley2006-02-272-2/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In order to use the new execute_in_process_context() API, you have to provide it with the work storage, which I do in SCSI in scsi_device and scsi_target, but which also means that we can no longer queue up the target reaps, so instead I moved the target to a state model which allows target_alloc to detect if we've received a dying target and wait for it to be gone. Hopefully, this should also solve the target namespace race. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * | | | | [SCSI] add execute_in_process_context() APIJames Bottomley2006-02-271-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We have several points in the SCSI stack (primarily for our device functions) where we need to guarantee process context, but (given the place where the last reference was released) we cannot guarantee this. This API gets around the issue by executing the function directly if the caller has process context, but scheduling a workqueue to execute in process context if the caller doesn't have it. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * | | | | [SCSI] Recognize missing LUNs for non-standard devicesAlan Stern2006-02-271-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some non-standard SCSI targets or protocols, such as USB UFI, report "no LUN present" by setting the Peripheral Device Type to 0x1f and the Peripheral Qualifier to 0 (not 3 as the standard requires) in the INQUIRY response. This patch (as650b) adds a new target flag and code to accomodate such targets. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * | | | | [SCSI] sas: add support for enclosure and bad ID rphy attributesChristoph Hellwig2006-02-271-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * | | | | [SCSI] Add spi_populate_*_msg functionsMatthew Wilcox2006-02-271-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Introduce new helpers: - spi_populate_width_msg() - spi_populate_sync_msg() - spi_populate_ppr_msg() and use them in drivers which already enable the SPI transport. Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * | | | | [SCSI] Remove devfs support from the SCSI subsystemGreg KH2006-02-271-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As devfs has been disabled from the kernel tree for a number of months now (5 to be exact), here's a patch against 2.6.16-rc1-git1 that removes support for it from the SCSI subsystem. The patch also removes the scsi_disk devfs_name field as it's no longer needed. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * | | | | [SCSI] Neaten comments in scsi_cmnd.hMatthew Wilcox2006-02-271-10/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Wrap these two comments at 80 columns Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* | | | | | [PATCH] page migration reorgChristoph Lameter2006-03-222-19/+51
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Centralize the page migration functions in anticipation of additional tinkering. Creates a new file mm/migrate.c 1. Extract buffer_migrate_page() from fs/buffer.c 2. Extract central migration code from vmscan.c 3. Extract some components from mempolicy.c 4. Export pageout() and remove_from_swap() from vmscan.c 5. Make it possible to configure NUMA systems without page migration and non-NUMA systems with page migration. I had to so some #ifdeffing in mempolicy.c that may need a cleanup. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-16 06:10:42 +0000