aboutsummaryrefslogtreecommitdiffstats
path: root/drivers
Commit message (Collapse)AuthorAgeFilesLines
* ioat: cleanup completion status readsDan Williams2009-09-084-75/+46
| | | | | | | | | | The cleanup path makes an effort to only perform an atomic read of the 64-bit completion address. However in the 32-bit case it does not matter if we read the upper-32 and lower-32 non-atomically because the upper-32 will always be zero. Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* ioat: add some dev_dbg() callsDan Williams2009-09-084-4/+81
| | | | | | | Provide some output for debugging the driver. Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* ioat1: kill unused unmap parametersDan Williams2009-09-082-4/+0
| | | | | | | | | The unified ioat1/ioat2 ioat_dma_unmap() implementation derives the source and dest addresses from the unmap descriptor. There is no longer a need to track this information in struct ioat_desc_sw. Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* ioat2,3: convert to a true ring bufferDan Williams2009-09-086-686/+1122
| | | | | | | | | | | | | | | | | | | | Replace the current linked list munged into a ring with a native ring buffer implementation. The benefit of this approach is reduced overhead as many parameters can be derived from ring position with simple pointer comparisons and descriptor allocation/freeing becomes just a manipulation of head/tail pointers. It requires a contiguous allocation for the software descriptor information. Since this arrangement is significantly different from the ioat1 chain, move ioat2,3 support into its own file and header. Common routines are exported from driver/dma/ioat/dma.[ch]. Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* ioat: prepare the code for ioat[12]_dma_chan splitDan Williams2009-09-082-370/+390
| | | | | | | | | | | | | | | | | | | | | | Prepare the code for the conversion of the ioat2 linked-list-ring into a native ring buffer. After this conversion ioat2 channels will share less of the ioat1 infrastructure, but there will still be places where sharing is possible. struct ioat_chan_common is created to house the channel attributes that will remain common between ioat1 and ioat2 channels. For every routine that accesses both common and hardware specific fields the old unified 'ioat_chan' pointer is split into an 'ioat' and 'chan' pointer. Where 'chan' references common fields and 'ioat' the hardware/version specific. [ Impact: pure structure member movement/variable renames, no logic changes ] Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* ioat: fix self test interruptsDan Williams2009-09-081-1/+2
| | | | | | | | | | | If a callback is to be attached to a descriptor the channel needs to know at ->prep time so it can set the interrupt enable bit. This is in preparation for moving descriptor ioat2 descriptor preparation from ->submit to ->prep. Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* ioat1: move descriptor allocation from submit to prepDan Williams2009-09-081-89/+65
| | | | | | | | | | | | | | The async_tx api assumes that after a successful ->prep a subsequent ->submit will not fail due to a lack of resources. This also fixes a bug in the allocation failure case. Previously the descriptors allocated prior to the allocation failure would not be returned to the free list. Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* ioat: define descriptor control bit-fieldDan Williams2009-09-082-32/+34
| | | | | | | | | This cleans up a mess of and'ing and or'ing bit definitions, and allows simple assignments from the specified dma_ctrl_flags parameter. Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* ioat: fix type mismatch for ->dmacountDan Williams2009-09-081-2/+2
| | | | | | | | | | | | | | | ->dmacount tracks the sequence number of active descriptors. It is written to the DMACOUNT register to update the channel's view of pending descriptors in the chain. The register is 16-bits so ->dmacount should be unsigned and 16-bit as well. Also modify ->desccount to maintain alignment. This was never a problem in practice because we never compared dmacount values, but this is a bug waiting to happen. Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* ioat: split ioat_dma_probe into core/version-specific routinesDan Williams2009-09-083-155/+200
| | | | | | | | | | | | Towards the removal of ioatdma_device.version split the initialization path into distinct versions. This conversion: 1/ moves version specific probe code to version specific routines 2/ removes the need for ioat_device 3/ turns off the ioat1 msi quirk if the device is reinitialized for intx Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* ioat: kill function prototype ifdef guardsDan Williams2009-09-081-9/+0
| | | | | | | | | | | | The only .c files that utilize these protected prototypes depend on CONFIG_INTEL_IOATDMA=y, so there is no value gained in providing empty prototypes. [ Impact: pure cleanup ] Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* ioat: cleanup some long deref chains and 80 column collisionsDan Williams2009-09-082-167/+144
| | | | | | | | | | | | | * reduce device->common. to dma-> in ioat_dma_{probe,remove,selftest} * ioat_lookup_chan_by_index to ioat_chan_by_index * multi-line function definitions * ioat_desc_sw.async_tx to ioat_desc_sw.txd * desc->txd. to tx-> in cleanup routine Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* ioat: convert ioat_probe to pcim/devmDan Williams2009-09-084-141/+68
| | | | | | | | | | | | | | The driver currently duplicates much of what these routines offer, so just use the common code. For example ->irq_mode tracks what interrupt mode was initialized, which duplicates the ->msix_enabled and ->msi_enabled handling in pcim_release. This also adds a check to the return value of dma_async_device_register, which can fail. Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* ioat: move definitions to dma.hDan Williams2009-09-082-14/+16
| | | | | | | | | Some of these defines may be useful outside of dma.c and the header is private so there are no namespace pollution concerns. Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* ioat: move to drivers/dma/ioat/Dan Williams2009-07-289-13/+14
| | | | | | | | | | | | When first created the ioat driver was the only inhabitant of drivers/dma/. Now, it is the only multi-file (more than a .c and a .h) driver in the directory. Moving it to an ioat/ subdirectory allows the naming convention to be cleaned up, and allows for future splitting of the source files by hardware version (v1, v2, and v3). Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* char: mxser, fix ISA board lookupPeter Botha2009-06-091-1/+1
| | | | | | | | | | | | | | | | | There's a bug in the mxser kernel module that still appears in the 2.6.29.4 kernel. mxser_get_ISA_conf takes a ioaddress as its first argument, by passing the not of the ioaddr, you're effectively passing 0 which means it won't be able to talk to an ISA card. I have tested this, and removing the ! fixes the problem. Cc: "Peter Botha" <peterb@goldcircle.co.za> Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linusLinus Torvalds2009-06-092-2/+2
|\ | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: kvm: fix kvm reboot crash when MAXSMP is used cpumask: alloc zeroed cpumask for static cpumask_var_ts cpumask: introduce zalloc_cpumask_var
| * cpumask: alloc zeroed cpumask for static cpumask_var_tsYinghai Lu2009-06-092-2/+2
| | | | | | | | | | | | | | | | These are defined as static cpumask_var_t so if MAXSMP is not used, they are cleared already. Avoid surprises when MAXSMP is enabled. Signed-off-by: Yinghai Lu <yinghai.lu@kernel.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds2009-06-091-6/+5
|\ \ | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: cls_cgroup: Fix oops when user send improperly 'tc filter add' request r8169: fix crash when large packets are received
| * | r8169: fix crash when large packets are receivedEric Dumazet2009-06-091-6/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Michael Tokarev reported receiving a large packet could crash a machine with RTL8169 NIC. ( original thread at http://lkml.org/lkml/2009/6/8/192 ) Problem is this driver tells that NIC frames up to 16383 bytes can be received but provides skb to rx ring allocated with smaller sizes (1536 bytes in case standard 1500 bytes MTU is used) When a frame larger than what was allocated by driver is received, dma transfert can occurs past the end of buffer and corrupt kernel memory. Fix is to tell to NIC what is the maximum size a frame can be. This bug is very old, (before git introduction, linux-2.6.10), and should be backported to stable versions. Reported-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Tested-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | Merge branch 'for-linus' of git://neil.brown.name/mdLinus Torvalds2009-06-091-14/+14
|\ \ \ | |_|/ |/| | | | | | | | | | | | | | * 'for-linus' of git://neil.brown.name/md: md/raid5: fix bug in reshape code when chunk_size decreases. md/raid5 - avoid deadlocks in get_active_stripe during reshape md/raid5: use conf->raid_disks in preference to mddev->raid_disk
| * | md/raid5: fix bug in reshape code when chunk_size decreases.NeilBrown2009-06-091-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that we support changing the chunksize, we calculate "reshape_sectors" to be the max of number of sectors in old and new chunk size. However there is one please where we still use 'chunksize' rather than 'reshape_sectors'. This causes a reshape that reduces the size of chunks to freeze. Signed-off-by: NeilBrown <neilb@suse.de>
| * | md/raid5 - avoid deadlocks in get_active_stripe during reshapeNeilBrown2009-06-091-11/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | md has functionality to 'quiesce' and array so that all pending IO completed and no new IO starts. This is used to achieve a stable state before making internal changes. Currently this quiescing applies equally to normal IO, resync IO, and reshape IO. However there is a problem with applying it to reshape IO. Reshape can have multiple 'stripe_heads' that must be active together. If the quiesce come between allocating the first and the last of such a collection, then we deadlock, as the last will not be allocated until the quiesce is lifted, the quiesce will not be lifted until the first (which has been allocated) gets used, and that first cannot be used until the last is allocated. It is not necessary to inhibit reshape IO when a quiesce is requested. Those places in the code that require a full quiesce will ensure the reshape thread is not running at all. So allow reshape requests to get access to new stripe_heads without being blocked by a 'quiesce'. This only affects in-place reshapes (i.e. where the array does not grow or shrink) and these are only newly supported. So this patch is not needed in earlier kernels. Signed-off-by: NeilBrown <neilb@suse.de>
| * | md/raid5: use conf->raid_disks in preference to mddev->raid_diskNeilBrown2009-06-091-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | mddev->raid_disks can be changed and any time by a request from user-space. It is a suggestion as to what number of raid_disks is desired. conf->raid_disks can only be changed by the raid5 module with suitable locks in place. It is a statement as to the current number of raid_disks. There are two places where the latter should be used, but the former is used. This can lead to a crash when reshaping an array. This patch changes to mddev-> to conf-> Signed-off-by: NeilBrown <neilb@suse.de>
* | | Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds2009-06-081-0/+1
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: MIPS: Outline udelay and fix a few issues. MIPS: ioctl.h: Fix headers_check warnings MIPS: Cobalt: PCI bus is always required to obtain the board ID MIPS: Kconfig: Remove "Support for" from Cavium system type MIPS: Sibyte: Honor CONFIG_CMDLINE SSB: BCM47xx: Export ssb_watchdog_timer_set
| * | | SSB: BCM47xx: Export ssb_watchdog_timer_setMatthieu Castet2009-06-081-0/+1
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | this patch export ssb_watchdog_timer_set to allow to use it in a Linux watchdog driver. Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr> Acked-by : Michael Buesch <mb@bu3sch.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* | | pata_netcell: Fix typoAlan Cox2009-06-081-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | The previous patch submission had a I typo I didn't catch but Bartlomiej noted. Guess this proves the point about any patch being risky late in an rc Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | Merge branch 'for-linus' of ↵Linus Torvalds2009-06-081-16/+6
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: pdc202xx_old: fix resetproc() method pdc202xx_old: fix 'pdc20246_dma_ops'
| * | | pdc202xx_old: fix resetproc() methodSergei Shtylyov2009-06-071-14/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | pdc202xx_reset() calls pdc202xx_reset_host() twice, for both channels, while that function actually twiddles the single, shared software reset bit -- the net effect is a duplicated reset and horrendous 4 second delay happening not only on a channel reset but also when dma_lost_irq() and dma_clear() methods are called. Fold pdc202xx_reset_host() into pdc202xx_reset(), fix printk(), and move it before the actual reset... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
| * | | pdc202xx_old: fix 'pdc20246_dma_ops'Sergei Shtylyov2009-06-071-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit ac95beedf8bc97b24f9540d4da9952f07221c023 (ide: add struct ide_port_ops (take 2)) erroneously converted the driver's dma_timeout() and dma_lost_irq() methods to call the driver's resetproc() method regardless of whether it was defined for this specific controller while it hadn't been defined and hence called for PDC20246. So the dma_clear() method, the successor of dma_timeout(), shouldn't exist and the dma_lost_irq() method should be standard for PDC20246. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* | | | Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds2009-06-081-0/+2
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 5543/1: arm: serial amba: add missing declaration in serial.h [ARM] pxa: fix pxa27x_udc default pullup GPIO [ARM] pxa/imote2: fix UCAM sensor board ADC model number mx[23]: don't put clock lookups in __initdata fix oops when using console=ttymxcN with N > 0 [ARM] ARMv7 errata: only apply fixes when running on applicable CPU [ARM] 5534/1: kmalloc must return a cache line aligned buffer
| * | | | fix oops when using console=ttymxcN with N > 0Eric Lammerts2009-06-031-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Eric Lammerts <eric@lammerts.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* | | | | Merge branch 'for-linus' of ↵Linus Torvalds2009-06-085-15/+80
|\ \ \ \ \ | |_|_|/ / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: sdhci-of: Fix the wrong accessor to HOSTVER register mvsdio: fix config failure with some high speed SDHC cards mvsdio: ignore high speed timing requests from the core mmc/omap: Use disable_irq_nosync() from within irq handlers. sdhci-of: Add fsl,esdhc as a valid compatible to bind against mvsdio: allow automatic loading when modular mxcmmc: Fix missing return value checking in DMA setup code. mxcmmc : Reset the SDHC hardware if software timeout occurs. omap_hsmmc: Trivial fix for a typo in comment mxcmmc: decrease minimum frequency to make MMC cards work
| * | | | sdhci-of: Fix the wrong accessor to HOSTVER registerDave Liu2009-06-031-1/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Freescale eSDHC controller has the special order for the HOST version register. that is not same as the other's registers. The address of HOSTVER in spec is 0xFE, and we need use the in_be16(0xFE) to access it, not in_be16(0xFC). Signed-off-by: Dave Liu <daveliu@freescale.com> Acked-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Pierre Ossman <pierre@ossman.eu>
| * | | | mvsdio: fix config failure with some high speed SDHC cardsNicolas Pitre2009-06-031-0/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Especially with Sandisk SDHC cards, the second SWITCH command was failing with a timeout and the card was not recognized at all. However if the system was busy, or debugging was enabled, or a udelay(100) was inserted before the second SWITCH command in the core code, then the timing was so that the card started to work. With some unusual block sizes, the data FIFO status doesn't indicate a "empty" state right away when the data transfer is done. Queuing another data transfer in that condition results in a transfer timeout. The empty FIFO bit eventually get set by itself in less than 50 usecs when it is not set right away. So let's just poll for that bit before configuring the controller with a new data transfer. Signed-off-by: Nicolas Pitre <nico@marvell.com> Signed-off-by: Pierre Ossman <pierre@ossman.eu>
| * | | | mvsdio: ignore high speed timing requests from the coreNicolas Pitre2009-06-031-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Empirical evidences show that this is causing far more problems than it solves when this mode is enabled in the host hardware. Amongst those cards that are known to be non functional when this bit is set are: A-Data "Speedy" 2GB SD card Kodak 512MB SD card Ativa 1GB MicroSD card Marvell 8688 (WIFI/Bluetooth) SDIO card Since those cards do work on other host controllers which do honnor the hs timing, the issue must be with this particular host hardware. Signed-off-by: Nicolas Pitre <nico@marvell.com> Signed-off-by: Pierre Ossman <pierre@ossman.eu>
| * | | | mmc/omap: Use disable_irq_nosync() from within irq handlers.Ben Nizette2009-06-031-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | disable_irq() should wait for all running handlers to complete before returning. As such, if it's used to disable an interrupt from that interrupt's handler it will deadlock. This replaces the dangerous instances with the _nosync() variant which doesn't have this problem. Signed-off-by: Ben Nizette <bn@niasdigital.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Pierre Ossman <pierre@ossman.eu>
| * | | | sdhci-of: Add fsl,esdhc as a valid compatible to bind againstKumar Gala2009-06-031-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We plan to use fsl,esdhc going forward as the base compatible so update the driver to bind against it. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Pierre Ossman <pierre@ossman.eu>
| * | | | mvsdio: allow automatic loading when modularNicolas Pitre2009-06-031-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Nicolas Pitre <nico@marvell.com> Tested-by: Martin Michlmayr <tbm@cyrius.com> Signed-off-by: Pierre Ossman <pierre@ossman.eu>
| * | | | mxcmmc: Fix missing return value checking in DMA setup code.Martin Fuzzey2009-06-031-10/+26
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Martin Fuzzey <mfuzzey@gmail.com>
| * | | | mxcmmc : Reset the SDHC hardware if software timeout occurs.Martin Fuzzey2009-06-031-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When a software timeout occurs in polling mode hardware was left in an indeterminate state causing subsequent operations to block. Signed-off-by: Martin Fuzzey <mfuzzey@gmail.com>
| * | | | omap_hsmmc: Trivial fix for a typo in commentAnand Gadiyar2009-06-031-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Pierre Ossman <pierre@ossman.eu>
| * | | | mxcmmc: decrease minimum frequency to make MMC cards workSascha Hauer2009-06-031-1/+3
| |/ / / | | | | | | | | | | | | | | | | | | | | | | | | This is a temporary workaround until the MMC stack can be fixed. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Pierre Ossman <pierre@ossman.eu>
* | | | Merge branch 'for-linus' of ↵Linus Torvalds2009-06-061-0/+2
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: x86/pci: fix mmconfig detection with 32bit near 4g PCI: use fixed-up device class when configuring device
| * | | | PCI: use fixed-up device class when configuring deviceYu Zhao2009-06-041-0/+2
| |/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The device class may be changed after the fixup, so re-read the class value from pci_dev when configuring the device. Otherwise some devices such as JMicron SATA controller won't work. Reviewed-by: Matthew Wilcox <willy@linux.intel.com> Reviewed-by: Grant Grundler <grundler@parisc-linux.org> Tested-by: Marc Dionne <marc.c.dionne@gmail.com> Signed-off-by: Yu Zhao <yu.zhao@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* | | | Merge branch 'upstream-linus2' of ↵Linus Torvalds2009-06-061-6/+11
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: [libata] pata_ali: Use IGN_SIMPLEX
| * | | | [libata] pata_ali: Use IGN_SIMPLEXAlan Cox2009-06-051-6/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some ALi devices report simplex if they have been disabled and re-enabled, and restoring the byte does not work. Ignore it - the needed supporting logic is already present for the SATA ULi ports. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* | | | | mtd: davinci nand: update clock namingKevin Hilman2009-06-051-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | DaVinci clock support has been updated in mainline. Update clock names accordingly. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | | Merge branch 'upstream-linus' of ↵Linus Torvalds2009-06-054-9/+91
|\| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: ata_piix: Add HP Compaq nc6000 to the broken poweroff list ahci: add warning messages for hp laptops with broken suspend pata_efar: fix PIO2 underclocking pata_legacy: wait for async probing
| * | | | ata_piix: Add HP Compaq nc6000 to the broken poweroff listVille Syrjala2009-06-051-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | HP Compaq nc6000 suffers from the double disk spindown issue. Add it to the broken poweroff DMI list. Signed-off-by: Ville Syrjala <syrjala@sci.fi> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-26 09:47:54 +0000