1 files changed, 39 insertions, 34 deletions

diff --git a/net/mac80211/rc80211_pid_algo.c b/net/mac80211/rc80211_pid_algo.c
index b16801cde06..01d59a8e334 100644
--- a/net/mac80211/rc80211_pid_algo.c
+++ b/net/mac80211/rc80211_pid_algo.c
@@ -317,13 +317,44 @@ rate_control_pid_rate_init(void *priv, struct ieee80211_supported_band *sband,
 			   struct ieee80211_sta *sta, void *priv_sta)
 {
 	struct rc_pid_sta_info *spinfo = priv_sta;
+	struct rc_pid_info *pinfo = priv;
+	struct rc_pid_rateinfo *rinfo = pinfo->rinfo;
 	struct sta_info *si;
+	int i, j, tmp;
+	bool s;
 
 	/* TODO: This routine should consider using RSSI from previous packets
 	 * as we need to have IEEE 802.1X auth succeed immediately after assoc..
 	 * Until that method is implemented, we will use the lowest supported
 	 * rate as a workaround. */
 
+	/* Sort the rates. This is optimized for the most common case (i.e.
+	 * almost-sorted CCK+OFDM rates). Kind of bubble-sort with reversed
+	 * mapping too. */
+	for (i = 0; i < sband->n_bitrates; i++) {
+		rinfo[i].index = i;
+		rinfo[i].rev_index = i;
+		if (RC_PID_FAST_START)
+			rinfo[i].diff = 0;
+		else
+			rinfo[i].diff = i * pinfo->norm_offset;
+	}
+	for (i = 1; i < sband->n_bitrates; i++) {
+		s = 0;
+		for (j = 0; j < sband->n_bitrates - i; j++)
+			if (unlikely(sband->bitrates[rinfo[j].index].bitrate >
+				     sband->bitrates[rinfo[j + 1].index].bitrate)) {
+				tmp = rinfo[j].index;
+				rinfo[j].index = rinfo[j + 1].index;
+				rinfo[j + 1].index = tmp;
+				rinfo[rinfo[j].index].rev_index = j;
+				rinfo[rinfo[j + 1].index].rev_index = j + 1;
+				s = 1;
+			}
+		if (!s)
+			break;
+	}
+
 	spinfo->txrate_idx = rate_lowest_index(sband, sta);
 	/* HACK */
 	si = container_of(sta, struct sta_info, sta);
@@ -336,21 +367,22 @@ static void *rate_control_pid_alloc(struct ieee80211_hw *hw,
 	struct rc_pid_info *pinfo;
 	struct rc_pid_rateinfo *rinfo;
 	struct ieee80211_supported_band *sband;
-	int i, j, tmp;
-	bool s;
+	int i, max_rates = 0;
 #ifdef CONFIG_MAC80211_DEBUGFS
 	struct rc_pid_debugfs_entries *de;
 #endif
 
-	sband = hw->wiphy->bands[hw->conf.channel->band];
-
 	pinfo = kmalloc(sizeof(*pinfo), GFP_ATOMIC);
 	if (!pinfo)
 		return NULL;
 
-	/* We can safely assume that sband won't change unless we get
-	 * reinitialized. */
-	rinfo = kmalloc(sizeof(*rinfo) * sband->n_bitrates, GFP_ATOMIC);
+	for (i = 0; i < IEEE80211_NUM_BANDS; i++) {
+		sband = hw->wiphy->bands[i];
+		if (sband->n_bitrates > max_rates)
+			max_rates = sband->n_bitrates;
+	}
+
+	rinfo = kmalloc(sizeof(*rinfo) * max_rates, GFP_ATOMIC);
 	if (!rinfo) {
 		kfree(pinfo);
 		return NULL;
@@ -368,33 +400,6 @@ static void *rate_control_pid_alloc(struct ieee80211_hw *hw,
 	pinfo->rinfo = rinfo;
 	pinfo->oldrate = 0;
 
-	/* Sort the rates. This is optimized for the most common case (i.e.
-	 * almost-sorted CCK+OFDM rates). Kind of bubble-sort with reversed
-	 * mapping too. */
-	for (i = 0; i < sband->n_bitrates; i++) {
-		rinfo[i].index = i;
-		rinfo[i].rev_index = i;
-		if (RC_PID_FAST_START)
-			rinfo[i].diff = 0;
-		else
-			rinfo[i].diff = i * pinfo->norm_offset;
-	}
-	for (i = 1; i < sband->n_bitrates; i++) {
-		s = 0;
-		for (j = 0; j < sband->n_bitrates - i; j++)
-			if (unlikely(sband->bitrates[rinfo[j].index].bitrate >
-				     sband->bitrates[rinfo[j + 1].index].bitrate)) {
-				tmp = rinfo[j].index;
-				rinfo[j].index = rinfo[j + 1].index;
-				rinfo[j + 1].index = tmp;
-				rinfo[rinfo[j].index].rev_index = j;
-				rinfo[rinfo[j + 1].index].rev_index = j + 1;
-				s = 1;
-			}
-		if (!s)
-			break;
-	}
-
 #ifdef CONFIG_MAC80211_DEBUGFS
 	de = &pinfo->dentries;
 	de->target = debugfs_create_u32("target_pf", S_IRUSR | S_IWUSR,