diff options
Diffstat (limited to 'drivers/pci')
| -rw-r--r-- | drivers/pci/pci-acpi.c | 110 | ||||
| -rw-r--r-- | drivers/pci/pci.c | 22 | ||||
| -rw-r--r-- | drivers/pci/pci.h | 4 | ||||
| -rw-r--r-- | drivers/pci/probe.c | 2 | ||||
| -rw-r--r-- | drivers/pci/quirks.c | 5 | ||||
| -rw-r--r-- | drivers/pci/rom.c | 4 | ||||
| -rw-r--r-- | drivers/pci/setup-bus.c | 12 |
7 files changed, 139 insertions, 20 deletions
diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c index bc01d34e263..e9e37abe1f7 100644 --- a/drivers/pci/pci-acpi.c +++ b/drivers/pci/pci-acpi.c @@ -1,9 +1,10 @@ /* * File: pci-acpi.c - * Purpose: Provide PCI supports in ACPI + * Purpose: Provide PCI support in ACPI * - * Copyright (C) 2004 Intel - * Copyright (C) Tom Long Nguyen (tom.l.nguyen@intel.com) + * Copyright (C) 2005 David Shaohua Li <shaohua.li@intel.com> + * Copyright (C) 2004 Tom Long Nguyen <tom.l.nguyen@intel.com> + * Copyright (C) 2004 Intel Corp. */ #include <linux/delay.h> @@ -16,6 +17,7 @@ #include <acpi/acpi_bus.h> #include <linux/pci-acpi.h> +#include "pci.h" static u32 ctrlset_buf[3] = {0, 0, 0}; static u32 global_ctrlsets = 0; @@ -207,3 +209,105 @@ acpi_status pci_osc_control_set(u32 flags) return status; } EXPORT_SYMBOL(pci_osc_control_set); + +/* + * _SxD returns the D-state with the highest power + * (lowest D-state number) supported in the S-state "x". + * + * If the devices does not have a _PRW + * (Power Resources for Wake) supporting system wakeup from "x" + * then the OS is free to choose a lower power (higher number + * D-state) than the return value from _SxD. + * + * But if _PRW is enabled at S-state "x", the OS + * must not choose a power lower than _SxD -- + * unless the device has an _SxW method specifying + * the lowest power (highest D-state number) the device + * may enter while still able to wake the system. + * + * ie. depending on global OS policy: + * + * if (_PRW at S-state x) + * choose from highest power _SxD to lowest power _SxW + * else // no _PRW at S-state x + * choose highest power _SxD or any lower power + * + * currently we simply return _SxD, if present. + */ + +static int acpi_pci_choose_state(struct pci_dev *pdev, pm_message_t state) +{ + /* TBD */ + + return -ENODEV; +} + +static int acpi_pci_set_power_state(struct pci_dev *dev, pci_power_t state) +{ + acpi_handle handle = DEVICE_ACPI_HANDLE(&dev->dev); + static int state_conv[] = { + [0] = 0, + [1] = 1, + [2] = 2, + [3] = 3, + [4] = 3 + }; + int acpi_state = state_conv[(int __force) state]; + + if (!handle) + return -ENODEV; + return acpi_bus_set_power(handle, acpi_state); +} + + +/* ACPI bus type */ +static int pci_acpi_find_device(struct device *dev, acpi_handle *handle) +{ + struct pci_dev * pci_dev; + acpi_integer addr; + + pci_dev = to_pci_dev(dev); + /* Please ref to ACPI spec for the syntax of _ADR */ + addr = (PCI_SLOT(pci_dev->devfn) << 16) | PCI_FUNC(pci_dev->devfn); + *handle = acpi_get_child(DEVICE_ACPI_HANDLE(dev->parent), addr); + if (!*handle) + return -ENODEV; + return 0; +} + +static int pci_acpi_find_root_bridge(struct device *dev, acpi_handle *handle) +{ + int num; + unsigned int seg, bus; + + /* + * The string should be the same as root bridge's name + * Please look at 'pci_scan_bus_parented' + */ + num = sscanf(dev->bus_id, "pci%04x:%02x", &seg, &bus); + if (num != 2) + return -ENODEV; + *handle = acpi_get_pci_rootbridge_handle(seg, bus); + if (!*handle) + return -ENODEV; + return 0; +} + +static struct acpi_bus_type pci_acpi_bus = { + .bus = &pci_bus_type, + .find_device = pci_acpi_find_device, + .find_bridge = pci_acpi_find_root_bridge, +}; + +static int __init pci_acpi_init(void) +{ + int ret; + + ret = register_acpi_bus_type(&pci_acpi_bus); + if (ret) + return 0; + platform_pci_choose_state = acpi_pci_choose_state; + platform_pci_set_power_state = acpi_pci_set_power_state; + return 0; +} +arch_initcall(pci_acpi_init); diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index d382bdb7b56..1b34fc56067 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -235,7 +235,7 @@ pci_find_parent_resource(const struct pci_dev *dev, struct resource *res) * -EIO if device does not support PCI PM. * 0 if we can successfully change the power state. */ - +int (*platform_pci_set_power_state)(struct pci_dev *dev, pci_power_t t); int pci_set_power_state(struct pci_dev *dev, pci_power_t state) { @@ -299,11 +299,20 @@ pci_set_power_state(struct pci_dev *dev, pci_power_t state) msleep(10); else if (state == PCI_D2 || dev->current_state == PCI_D2) udelay(200); - dev->current_state = state; + /* + * Give firmware a chance to be called, such as ACPI _PRx, _PSx + * Firmware method after natice method ? + */ + if (platform_pci_set_power_state) + platform_pci_set_power_state(dev, state); + + dev->current_state = state; return 0; } +int (*platform_pci_choose_state)(struct pci_dev *dev, pm_message_t state); + /** * pci_choose_state - Choose the power state of a PCI device * @dev: PCI device to be suspended @@ -316,10 +325,17 @@ pci_set_power_state(struct pci_dev *dev, pci_power_t state) pci_power_t pci_choose_state(struct pci_dev *dev, pm_message_t state) { + int ret; + if (!pci_find_capability(dev, PCI_CAP_ID_PM)) return PCI_D0; - switch (state) { + if (platform_pci_choose_state) { + ret = platform_pci_choose_state(dev, state); + if (ret >= 0) + state = ret; + } + switch (state) { case 0: return PCI_D0; case 3: return PCI_D3hot; default: diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h index 744da0d4ae5..d94d7af4f7a 100644 --- a/drivers/pci/pci.h +++ b/drivers/pci/pci.h @@ -11,6 +11,10 @@ extern int pci_bus_alloc_resource(struct pci_bus *bus, struct resource *res, void (*alignf)(void *, struct resource *, unsigned long, unsigned long), void *alignf_data); +/* Firmware callbacks */ +extern int (*platform_pci_choose_state)(struct pci_dev *dev, pm_message_t state); +extern int (*platform_pci_set_power_state)(struct pci_dev *dev, pci_power_t state); + /* PCI /proc functions */ #ifdef CONFIG_PROC_FS extern int pci_proc_attach_device(struct pci_dev *dev); diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index df3bdae2040..93e8a878ea9 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -507,7 +507,7 @@ int __devinit pci_scan_bridge(struct pci_bus *bus, struct pci_dev * dev, int max pci_write_config_dword(dev, PCI_PRIMARY_BUS, buses); if (!is_cardbus) { - child->bridge_ctl = PCI_BRIDGE_CTL_NO_ISA; + child->bridge_ctl = bctl | PCI_BRIDGE_CTL_NO_ISA; /* * Adjust subordinate busnr in parent buses. * We do this before scanning for children because diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 1521fd5d95c..8d0968bd527 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -820,6 +820,11 @@ static void __init asus_hides_smbus_hostbridge(struct pci_dev *dev) case 0x0001: /* Toshiba Satellite A40 */ asus_hides_smbus = 1; } + if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB) + switch(dev->subsystem_device) { + case 0x0001: /* Toshiba Tecra M2 */ + asus_hides_smbus = 1; + } } else if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_SAMSUNG)) { if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB) switch(dev->subsystem_device) { diff --git a/drivers/pci/rom.c b/drivers/pci/rom.c index 838575e3fac..713c78f3a65 100644 --- a/drivers/pci/rom.c +++ b/drivers/pci/rom.c @@ -125,7 +125,9 @@ void __iomem *pci_map_rom(struct pci_dev *pdev, size_t *size) image += readw(pds + 16) * 512; } while (!last_image); - *size = image - rom; + /* never return a size larger than the PCI resource window */ + /* there are known ROMs that get the size wrong */ + *size = min((size_t)(image - rom), *size); return rom; } diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c index 9fe48f712be..a2eebc6eaac 100644 --- a/drivers/pci/setup-bus.c +++ b/drivers/pci/setup-bus.c @@ -51,8 +51,6 @@ pbus_assign_resources_sorted(struct pci_bus *bus) struct resource_list head, *list, *tmp; int idx; - bus->bridge_ctl &= ~PCI_BRIDGE_CTL_VGA; - head.next = NULL; list_for_each_entry(dev, &bus->devices, bus_list) { u16 class = dev->class >> 8; @@ -62,10 +60,6 @@ pbus_assign_resources_sorted(struct pci_bus *bus) class == PCI_CLASS_BRIDGE_HOST) continue; - if (class == PCI_CLASS_DISPLAY_VGA || - class == PCI_CLASS_NOT_DEFINED_VGA) - bus->bridge_ctl |= PCI_BRIDGE_CTL_VGA; - pdev_sort_resources(dev, &head); } @@ -509,12 +503,6 @@ pci_bus_assign_resources(struct pci_bus *bus) pbus_assign_resources_sorted(bus); - if (bus->bridge_ctl & PCI_BRIDGE_CTL_VGA) { - /* Propagate presence of the VGA to upstream bridges */ - for (b = bus; b->parent; b = b->parent) { - b->bridge_ctl |= PCI_BRIDGE_CTL_VGA; - } - } list_for_each_entry(dev, &bus->devices, bus_list) { b = dev->subordinate; if (!b) |