diff options
Diffstat (limited to 'drivers/input/keyboard/cypressbln/issp_directives.h')
-rw-r--r-- | drivers/input/keyboard/cypressbln/issp_directives.h | 474 |
1 files changed, 0 insertions, 474 deletions
diff --git a/drivers/input/keyboard/cypressbln/issp_directives.h b/drivers/input/keyboard/cypressbln/issp_directives.h deleted file mode 100644 index b6cdddc78fd..00000000000 --- a/drivers/input/keyboard/cypressbln/issp_directives.h +++ /dev/null @@ -1,474 +0,0 @@ -// filename: ISSP_Directives.h -#include "issp_revision.h" -#ifdef PROJECT_REV_304 -/* Copyright 2006-2007, Cypress Semiconductor Corporation. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND -CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, -INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS -BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR -CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT -OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR -BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF -LIABILITY, WHETHER IN CONRTACT, STRICT LIABILITY, OR TORT (INCLUDING -NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - - - Disclaimer: CYPRESS MAKES NO WARRANTY OF ANY KIND,EXPRESS OR IMPLIED, - WITH REGARD TO THIS MATERIAL, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. - Cypress reserves the right to make changes without further notice to the - materials described herein. Cypress does not assume any liability arising - out of the application or use of any product or circuit described herein. - Cypress does not authorize its products for use as critical components in - life-support systems where a malfunction or failure may reasonably be - expected to result in significant injury to the user. The inclusion of - Cypress� product in a life-support systems application implies that the - manufacturer assumes all risk of such use and in doing so indemnifies - Cypress against all charges. - - Use may be limited by and subject to the applicable Cypress software - license agreement. - -----------------------------------------------------------------------------*/ - -// --------------------- Compiler Directives ---------------------------------- -#ifndef INC_ISSP_DIRECTIVES -#define INC_ISSP_DIRECTIVES - -// This directive will enable a Genral Purpose test-point on P1.7 -// It can be toggled as needed to measure timing, execution, etc... -// A "Test Point" sets a GPIO pin of the host processor high or low. This GPIO -// pin can be observed with an oscilloscope to verify the timing of key -// programming steps. TPs have been added in main() that set Port 0, pin 1 -// high during bulk erase, during each block write and during security write. -// The timing of these programming steps should be verified as correct as part -// of the validation process of the final program. - -//JBA -//#define USE_TP - -// **************************************************************************** -// ************* USER ATTENTION REQUIRED: TARGET SUPPLY VOLTAGE *************** -// **************************************************************************** -// This directive causes the proper Initialization vector #3 to be sent -// to the Target, based on what the Target Vdd programming voltage will -// be. Either 5V (if #define enabled) or 3.3V (if #define disabled). - -//JBA -//#define TARGET_VOLTAGE_IS_5V - -// **************************************************************************** -// **************** USER ATTENTION REQUIRED: PROGRAMMING MODE ***************** -// **************************************************************************** -// This directive selects whether code that uses reset programming mode or code -// that uses power cycle programming is use. Reset programming mode uses the -// external reset pin (XRES) to enter programming mode. Power cycle programming -// mode uses the power-on reset to enter programming mode. -// Applying signals to various pins on the target device must be done in a -// deliberate order when using power cycle mode. Otherwise, high signals to GPIO -// pins on the target will power the PSoC through the protection diodes. - -//JBA -// choose the RESET MODE or POWER MODE -// #define RESET_MODE - -// **************************************************************************** -// ****************** USER ATTENTION REQUIRED: TARGET PSOC ******************** -// **************************************************************************** -// The directives below enable support for various PSoC devices. The root part -// number to be programmed should be un-commented so that its value becomes -// defined. All other devices should be commented out. -// Select one device to be supported below: - -/*************** CY8CTMA30x, CY8CTMG30x, CY8CTST30x series by KIMC, 2009.08.11 ***********************************/ -//#define CY8CTST300_36 // CY8CTST300_36LQXI // 2009.08.11, not tested. -//#define CY8CTST300_48 // CY8CTST300_48LTXI // 2009.08.11, not tested. -//#define CY8CTST300_49 // CY8CTST300_49FNXI // 2009.08.11, not tested. -//#define CY8CTMA300_36 // CY8CTMA300_36LQXI // 2009.08.11, Test OK. -//#define CY8CTMA300_48 // CY8CTMA300_48LTXI // 2009.08.11, not tested. -//#define CY8CTMA300_49 // CY8CTMA300_49FNXI // 2009.08.11, not tested. -//#define CY8CTMG300_36 // CY8CTMG300_36LQXI // 2009.08.11, not tested. -//#define CY8CTMG300_48 // CY8CTMG300_48LTXI // 2009.08.11, not tested. -//#define CY8CTMG300_49 // CY8CTMG300_49FNXI // 2009.08.11, not tested. -//#define CY8CTMG300B_36 // CY8CTMG300B_36LQXI // 2009.08.11, not tested. -//#define CY8CTMA300B_36 // CY8CTMA300B_36LQXI // 2009.08.11, not tested. -//#define CY8CTST300B_36 // CY8CTST300B_36LQXI // 2009.08.11, not tested. -//#define CY8CTMA301_36 // CY8CTMA301_36LQXI // 2009.08.11, not tested. -//#define CY8CTMA301_48 // CY8CTMA301_48LTXI // 2009.08.11, not tested. -//#define CY8CTMA301D_36 // CY8CTMA301D_36LQXI // 2009.08.11, not tested. -//#define CY8CTMA301D_48 // CY8CTMA301D_48LTXI // 2009.08.11, not tested. -//#define CY8CTMA300D_36 // CY8CTMA300D_36LQXI // 2009.08.11, not tested. -//#define CY8CTMA300D_48 // CY8CTMA300D_48LTXI // 2009.08.11, not tested. -//#define CY8CTMA300D_49 // CY8CTMA300D_49FNXIT // 2009.08.11, not tested. -/****************************************************************************************************/ - -/*************** CY8CTMG/TST series modified by KJHW, 2009.08.14 *********************************************/ -//#define CY8CTMG110 -//#define CY8CTST200_24PIN -//#define CY8CTST200_32PIN -//#define CY8CTMG200_24PIN -//#define CY8CTMG200_32PIN -/***************************************************************************************************/ - -#define CY8C20236 -// **** CY8C20x66 devices **** -//#define CY8C20246 /// 2009.03.26. kimc -//#define CY8C20266 -//#define CY8C20366 -//#define CY8C20466 -//#define CY8C20566 -//#define CY8C20666 -//#define CY8C20066 -//#define CY8C200661 - -// **** CY8C21x23 devices **** -//#define CY8C21123 -//#define CY8C21223 -//#define CY8C21323 -//#define CY8C21002 - -// **** CY8C21x34 devices **** -//#define CY8C21234 -//#define CY8C21334 -//#define CY8C21434 -//#define CY8C21534 -//#define CY8C21634 -//#define CY8C21001 - -// **** CY8C24x23A devices **** -//#define CY8C24123A -//#define CY8C24223A -//#define CY8C24423A -//#define CY8C24000A - -// **** CY8C24x94 devices **** -//#define CY8C24794 -//#define CY8C24894 -//#define CY8C24994 -//#define CY8C24094 - -// **** CY8C27x34 devices **** -//#define CY8C27143 -//#define CY8C27243 -//#define CY8C27443 -//#define CY8C27543 -//#define CY8C27643 -//#define CY8C27002 - -// **** CY8C29x66 devices **** -//#define CY8C29466 -//#define CY8C29566 -//#define CY8C29666 -//#define CY8C29866 -//#define CY8C29002 - -//----------------------------------------------------------------------------- -// This section sets the Family that has been selected. These are used to -// simplify other conditional compilation blocks. -//----------------------------------------------------------------------------- - -/*************** CY8CTMA30x, CY8CTMG30x, CY8CTST30x series by KIMC, 2009.08.11 ***********************************/ -#ifdef CY8CTST300_36 // CY8CTST300_36LQXI // 2009.08.11, not tested. -#define CY8CTMx30x -#define CY8C20x66 -#endif -#ifdef CY8CTST300_48 // CY8CTST300_48LTXI // 2009.08.11, not tested. -#define CY8CTMx30x -#define CY8C20x66 -#endif -#ifdef CY8CTST300_49 // CY8CTST300_49FNXI // 2009.08.11, not tested. -#define CY8CTMx30x -#define CY8C20x66 -#endif -#ifdef CY8CTMA300_36 // CY8CTMA300_36LQXI // 2009.08.11, test OK -#define CY8CTMx30x -#define CY8C20x66 -#endif -#ifdef CY8CTMA300_48 // CY8CTMA300_48LTXI // 2009.08.11, not tested. -#define CY8CTMx30x -#define CY8C20x66 -#endif -#ifdef CY8CTMA300_49 // CY8CTMA300_49FNXI // 2009.08.11, not tested. -#define CY8CTMx30x -#define CY8C20x66 -#endif -#ifdef CY8CTMG300_36 // CY8CTMG300_36LQXI // 2009.08.11, not tested. -#define CY8CTMx30x -#define CY8C20x66 -#endif -#ifdef CY8CTMG300_48 // CY8CTMG300_48LTXI // 2009.08.11, not tested. -#define CY8CTMx30x -#define CY8C20x66 -#endif -#ifdef CY8CTMG300_49 // CY8CTMG300_49FNXI // 2009.08.11, not tested. -#define CY8CTMx30x -#define CY8C20x66 -#endif -#ifdef CY8CTMG300B_36 // CY8CTMG300B_36LQXI // 2009.08.11, not tested. -#define CY8CTMx30x -#define CY8C20x66 -#endif -#ifdef CY8CTMA300B_36 // CY8CTMA300B_36LQXI // 2009.08.11, not tested. -#define CY8CTMx30x -#define CY8C20x66 -#endif -#ifdef CY8CTST300B_36 // CY8CTST300B_36LQXI // 2009.08.11, not tested. -#define CY8CTMx30x -#define CY8C20x66 -#endif -#ifdef CY8CTMA301_36 // CY8CTMA301_36LQXI // 2009.08.11, not tested. -#define CY8CTMx30x -#define CY8C20x66 -#endif -#ifdef CY8CTMA301_48 // CY8CTMA301_48LTXI // 2009.08.11, not tested. -#define CY8CTMx30x -#define CY8C20x66 -#endif -#ifdef CY8CTMA301D_36 // CY8CTMA301D_36LQXI // 2009.08.11, not tested. -#define CY8CTMx30x -#define CY8C20x66 -#endif -#ifdef CY8CTMA301D_48 // CY8CTMA301D_48LTXI // 2009.08.11, not tested. -#define CY8CTMx30x -#define CY8C20x66 -#endif -#ifdef CY8CTMA300D_36 // CY8CTMA300D_36LQXI // 2009.08.11, not tested. -#define CY8CTMx30x -#define CY8C20x66 -#endif -#ifdef CY8CTMA300D_48 // CY8CTMA300D_48LTXI // 2009.08.11, not tested. -#define CY8CTMx30x -#define CY8C20x66 -#endif -#ifdef CY8CTMA300D_49 // CY8CTMA300D_49FNXIT // 2009.08.11, not tested. -#define CY8CTMx30x -#define CY8C20x66 -#endif -/**************************************************/ - -/*************** CY8CTMG/TST series modified by KJHW, 2009.08.14 *********************************************/ - -#ifdef CY8CTMG110 -#define CY8C21x34 -#endif -#ifdef CY8CTST200_24PIN -#define CY8C20x66 -#endif -#ifdef CY8CTST200_32PIN -#define CY8C20x66 -#endif -#ifdef CY8CTMG200_24PIN -#define CY8C20x66 -#endif -#ifdef CY8CTMG200_32PIN -#define CY8C20x66 -#endif - -/***************************************************************************************************/ -#ifdef CY8C20236 -#define CY8C20x66 -#endif -#ifdef CY8C20246 /// 2009.03.26. kimc -#define CY8C20x66 -#endif -#ifdef CY8C20266 -#define CY8C20x66 -#endif -#ifdef CY8C20366 -#define CY8C20x66 -#endif -#ifdef CY8C20466 -#define CY8C20x66 -#endif -#ifdef CY8C20566 -#define CY8C20x66 -#endif -#ifdef CY8C20666 -#define CY8C20x66 -#endif -#ifdef CY8C20066 -#define CY8C20x66 -#endif -#ifdef CY8C200661 -#define CY8C20x66 -#endif - -#ifdef CY8C21123 -#define CY8C21x23 -#endif -#ifdef CY8C21223 -#define CY8C21x23 -#endif -#ifdef CY8C21323 -#define CY8C21x23 -#endif -#ifdef CY8C21002 -#define CY8C21x23 -#endif -#ifdef CY8C21234 -#define CY8C21x34 -#endif -#ifdef CY8C21334 -#define CY8C21x34 -#endif -#ifdef CY8C21434 -#define CY8C21x34 -#endif -#ifdef CY8C21534 -#define CY8C21x34 -#endif -#ifdef CY8C21634 -#define CY8C21x34 -#endif -#ifdef CY8C21001 -#define CY8C21x34 -#endif -#ifdef CY8C24123A -#define CY8C24x23A -#endif -#ifdef CY8C24223A -#define CY8C24x23A -#endif -#ifdef CY8C24423A -#define CY8C24x23A -#endif -#ifdef CY8C24000A -#define CY8C24x23A -#endif -#ifdef CY8C24794 -#define CY8C24x94 -#endif -#ifdef CY8C24894 -#define CY8C24x94 -#endif -#ifdef CY8C24994 -#define CY8C24x94 -#endif -#ifdef CY8C24094 -#define CY8C24x94 -#endif -#ifdef CY8C27143 -#define CY8C27x43 -#endif -#ifdef CY8C27243 -#define CY8C27x43 -#endif -#ifdef CY8C27443 -#define CY8C27x43 -#endif -#ifdef CY8C27543 -#define CY8C27x43 -#endif -#ifdef CY8C27643 -#define CY8C27x43 -#endif -#ifdef CY8C27002 -#define CY8C27x43 -#endif -#ifdef CY8C29466 -#define CY8C29x66 -#endif -#ifdef CY8C29566 -#define CY8C29x66 -#endif -#ifdef CY8C29666 -#define CY8C29x66 -#endif -#ifdef CY8C29866 -#define CY8C29x66 -#endif -#ifdef CY8C29002 -#define CY8C29x66 -#endif - -//----------------------------------------------------------------------------- -// The directives below are used for Krypton. -// See the Krypton programming spec 001-15870 rev *A for more details. (The -// spec uses "mnemonics" instead of "directives" -//----------------------------------------------------------------------------- -#ifdef CY8C20x66 -#define TSYNC - -#define ID_SETUP_1 //PTJ: ID_SETUP_1 is similar to init1_v -#define ID_SETUP_2 //PTJ: ID_SETUP_2 is similar to init2_v -#define SET_BLOCK_NUM -#define CHECKSUM_SETUP //PTJ: CHECKSUM_SETUP_20x66 is the same as CHECKSUM-SETUP in 001-15870 -#define READ_CHECKSUM -#define PROGRAM_AND_VERIFY //PTJ: PROGRAM_BLOCK_20x66 is the same as PROGRAM-AND-VERIFY in 001-15870 -#define ERASE -#define SECURE -#define READ_SECURITY -#define READ_WRITE_SETUP -#define WRITE_BYTE -#define VERIFY_SETUP -#define READ_STATUS -#define READ_BYTE - //READ_ID_WORD //PTJ: 3rd Party Progrmmer will have to write code to handle this directive, we do it out own way in this code, see read_id_v -#endif -//----------------------------------------------------------------------------- - -//----------------------------------------------------------------------------- -// The directives below are used to define various sets of vectors that differ -// for more than one set of PSoC parts. -//----------------------------------------------------------------------------- -// **** Select a Checksum Setup Vector **** -#ifdef CY8C21x23 -#define CHECKSUM_SETUP_21_27 -#endif -#ifdef CY8C21x34 -#define CHECKSUM_SETUP_21_27 -#endif -#ifdef CY8C24x23A -#define CHECKSUM_SETUP_24_24A -#endif -#ifdef CY8C24x94 -#define CHECKSUM_SETUP_24_29 -#endif -#ifdef CY8C27x43 -#define CHECKSUM_SETUP_21_27 -#endif -#ifdef CY8C29x66 -#define CHECKSUM_SETUP_24_29 -#endif - -// **** Select a Program Block Vector **** - -#ifdef CY8C21x23 -#define PROGRAM_BLOCK_21_24_29 -#endif -#ifdef CY8C21x34 -#define PROGRAM_BLOCK_21_24_29 -#endif -#ifdef CY8C24x23A -#define PROGRAM_BLOCK_21_24_29 -#endif -#ifdef CY8C24x94 -#define PROGRAM_BLOCK_21_24_29 -#endif -#ifdef CY8C27x43 -#define PROGRAM_BLOCK_27 -#endif -#ifdef CY8C29x66 -#define PROGRAM_BLOCK_21_24_29 -#endif - -//----------------------------------------------------------------------------- -// The directives below are used to control switching banks if the device is -// has multiple banks of Flash. -//----------------------------------------------------------------------------- -// **** Select a Checksum Setup Vector **** -#ifdef CY8C24x94 -#define MULTI_BANK -#endif -#ifdef CY8C29x66 -#define MULTI_BANK -#endif - -// ---------------------------------------------------------------------------- -#endif //(INC_ISSP_DIRECTIVES) -#endif //(PROJECT_REV_) -//end of file ISSP_Directives.h |