aboutsummaryrefslogtreecommitdiffstats
path: root/arch
diff options
context:
space:
mode:
Diffstat (limited to 'arch')
-rw-r--r--arch/x86_64/kernel/nmi.c6
-rw-r--r--arch/x86_64/kernel/smp.c25
-rw-r--r--arch/x86_64/kernel/smpboot.c688
-rw-r--r--arch/x86_64/kernel/time.c9
4 files changed, 363 insertions, 365 deletions
diff --git a/arch/x86_64/kernel/nmi.c b/arch/x86_64/kernel/nmi.c
index 6ec5217f4b7..72f40ca4f06 100644
--- a/arch/x86_64/kernel/nmi.c
+++ b/arch/x86_64/kernel/nmi.c
@@ -130,12 +130,6 @@ int __init check_nmi_watchdog (void)
mdelay((10*1000)/nmi_hz); // wait 10 ticks
for (cpu = 0; cpu < NR_CPUS; cpu++) {
-#ifdef CONFIG_SMP
- /* Check cpu_callin_map here because that is set
- after the timer is started. */
- if (!cpu_isset(cpu, cpu_callin_map))
- continue;
-#endif
if (cpu_pda[cpu].__nmi_count - counts[cpu] <= 5) {
printk("CPU#%d: NMI appears to be stuck (%d)!\n",
cpu,
diff --git a/arch/x86_64/kernel/smp.c b/arch/x86_64/kernel/smp.c
index e3cdbf9a88b..1e379ed17b1 100644
--- a/arch/x86_64/kernel/smp.c
+++ b/arch/x86_64/kernel/smp.c
@@ -27,6 +27,7 @@
#include <asm/mach_apic.h>
#include <asm/mmu_context.h>
#include <asm/proto.h>
+#include <asm/apicdef.h>
/*
* Smarter SMP flushing macros.
@@ -413,3 +414,27 @@ asmlinkage void smp_call_function_interrupt(void)
atomic_inc(&call_data->finished);
}
}
+
+int safe_smp_processor_id(void)
+{
+ int apicid, i;
+
+ if (disable_apic)
+ return 0;
+
+ apicid = hard_smp_processor_id();
+ if (x86_cpu_to_apicid[apicid] == apicid)
+ return apicid;
+
+ for (i = 0; i < NR_CPUS; ++i) {
+ if (x86_cpu_to_apicid[i] == apicid)
+ return i;
+ }
+
+ /* No entries in x86_cpu_to_apicid? Either no MPS|ACPI,
+ * or called too early. Either way, we must be CPU 0. */
+ if (x86_cpu_to_apicid[0] == BAD_APICID)
+ return 0;
+
+ return 0; /* Should not happen */
+}
diff --git a/arch/x86_64/kernel/smpboot.c b/arch/x86_64/kernel/smpboot.c
index 7e2de8925b0..eca01e82d3c 100644
--- a/arch/x86_64/kernel/smpboot.c
+++ b/arch/x86_64/kernel/smpboot.c
@@ -12,8 +12,7 @@
* Pentium Pro and Pentium-II/Xeon MP machines.
* Original development of Linux SMP code supported by Caldera.
*
- * This code is released under the GNU General Public License version 2 or
- * later.
+ * This code is released under the GNU General Public License version 2
*
* Fixes
* Felix Koop : NR_CPUS used properly
@@ -31,9 +30,13 @@
* Tigran Aivazian : fixed "0.00 in /proc/uptime on SMP" bug.
* Maciej W. Rozycki : Bits for genuine 82489DX APICs
* Andi Kleen : Changed for SMP boot into long mode.
- * Rusty Russell : Hacked into shape for new "hotplug" boot process.
+ * Rusty Russell : Hacked into shape for new "hotplug" boot process.
+ * Andi Kleen : Converted to new state machine.
+ * Various cleanups.
+ * Probably mostly hotplug CPU ready now.
*/
+
#include <linux/config.h>
#include <linux/init.h>
@@ -54,11 +57,15 @@
#include <asm/tlbflush.h>
#include <asm/proto.h>
+/* Change for real CPU hotplug. Note other files need to be fixed
+ first too. */
+#define __cpuinit __init
+#define __cpuinitdata __initdata
+
/* Number of siblings per CPU package */
int smp_num_siblings = 1;
/* Package ID of each logical CPU */
u8 phys_proc_id[NR_CPUS] = { [0 ... NR_CPUS-1] = BAD_APICID };
-/* Core ID of each logical CPU */
u8 cpu_core_id[NR_CPUS] = { [0 ... NR_CPUS-1] = BAD_APICID };
EXPORT_SYMBOL(phys_proc_id);
EXPORT_SYMBOL(cpu_core_id);
@@ -66,13 +73,24 @@ EXPORT_SYMBOL(cpu_core_id);
/* Bitmask of currently online CPUs */
cpumask_t cpu_online_map;
+EXPORT_SYMBOL(cpu_online_map);
+
+/*
+ * Private maps to synchronize booting between AP and BP.
+ * Probably not needed anymore, but it makes for easier debugging. -AK
+ */
cpumask_t cpu_callin_map;
cpumask_t cpu_callout_map;
-static cpumask_t smp_commenced_mask;
+
+cpumask_t cpu_possible_map;
+EXPORT_SYMBOL(cpu_possible_map);
/* Per CPU bogomips and other parameters */
struct cpuinfo_x86 cpu_data[NR_CPUS] __cacheline_aligned;
+/* Set when the idlers are all forked */
+int smp_threads_ready;
+
cpumask_t cpu_sibling_map[NR_CPUS] __cacheline_aligned;
cpumask_t cpu_core_map[NR_CPUS] __cacheline_aligned;
@@ -80,8 +98,8 @@ cpumask_t cpu_core_map[NR_CPUS] __cacheline_aligned;
* Trampoline 80x86 program as an array.
*/
-extern unsigned char trampoline_data [];
-extern unsigned char trampoline_end [];
+extern unsigned char trampoline_data[];
+extern unsigned char trampoline_end[];
/*
* Currently trivial. Write the real->protected mode
@@ -89,7 +107,7 @@ extern unsigned char trampoline_end [];
* has made sure it's suitably aligned.
*/
-static unsigned long __init setup_trampoline(void)
+static unsigned long __cpuinit setup_trampoline(void)
{
void *tramp = __va(SMP_TRAMPOLINE_BASE);
memcpy(tramp, trampoline_data, trampoline_end - trampoline_data);
@@ -101,7 +119,7 @@ static unsigned long __init setup_trampoline(void)
* a given CPU
*/
-static void __init smp_store_cpu_info(int id)
+static void __cpuinit smp_store_cpu_info(int id)
{
struct cpuinfo_x86 *c = cpu_data + id;
@@ -110,145 +128,101 @@ static void __init smp_store_cpu_info(int id)
}
/*
- * TSC synchronization.
+ * Synchronize TSCs of CPUs
*
- * We first check whether all CPUs have their TSC's synchronized,
- * then we print a warning if not, and always resync.
+ * This new algorithm is less accurate than the old "zero TSCs"
+ * one, but we cannot zero TSCs anymore in the new hotplug CPU
+ * model.
*/
-static atomic_t tsc_start_flag = ATOMIC_INIT(0);
-static atomic_t tsc_count_start = ATOMIC_INIT(0);
-static atomic_t tsc_count_stop = ATOMIC_INIT(0);
-static unsigned long long tsc_values[NR_CPUS];
+static atomic_t __cpuinitdata tsc_flag;
+static __cpuinitdata DEFINE_SPINLOCK(tsc_sync_lock);
+static unsigned long long __cpuinitdata bp_tsc, ap_tsc;
#define NR_LOOPS 5
-extern unsigned int fast_gettimeoffset_quotient;
-
-static void __init synchronize_tsc_bp (void)
+static void __cpuinit sync_tsc_bp_init(int init)
{
- int i;
- unsigned long long t0;
- unsigned long long sum, avg;
- long long delta;
- long one_usec;
- int buggy = 0;
-
- printk(KERN_INFO "checking TSC synchronization across %u CPUs: ",num_booting_cpus());
-
- one_usec = cpu_khz;
-
- atomic_set(&tsc_start_flag, 1);
- wmb();
-
- /*
- * We loop a few times to get a primed instruction cache,
- * then the last pass is more or less synchronized and
- * the BP and APs set their cycle counters to zero all at
- * once. This reduces the chance of having random offsets
- * between the processors, and guarantees that the maximum
- * delay between the cycle counters is never bigger than
- * the latency of information-passing (cachelines) between
- * two CPUs.
- */
- for (i = 0; i < NR_LOOPS; i++) {
- /*
- * all APs synchronize but they loop on '== num_cpus'
- */
- while (atomic_read(&tsc_count_start) != num_booting_cpus()-1) mb();
- atomic_set(&tsc_count_stop, 0);
- wmb();
- /*
- * this lets the APs save their current TSC:
- */
- atomic_inc(&tsc_count_start);
-
- sync_core();
- rdtscll(tsc_values[smp_processor_id()]);
- /*
- * We clear the TSC in the last loop:
- */
- if (i == NR_LOOPS-1)
- write_tsc(0, 0);
-
- /*
- * Wait for all APs to leave the synchronization point:
- */
- while (atomic_read(&tsc_count_stop) != num_booting_cpus()-1) mb();
- atomic_set(&tsc_count_start, 0);
- wmb();
- atomic_inc(&tsc_count_stop);
- }
-
- sum = 0;
- for (i = 0; i < NR_CPUS; i++) {
- if (cpu_isset(i, cpu_callout_map)) {
- t0 = tsc_values[i];
- sum += t0;
- }
- }
- avg = sum / num_booting_cpus();
-
- sum = 0;
- for (i = 0; i < NR_CPUS; i++) {
- if (!cpu_isset(i, cpu_callout_map))
- continue;
-
- delta = tsc_values[i] - avg;
- if (delta < 0)
- delta = -delta;
- /*
- * We report bigger than 2 microseconds clock differences.
- */
- if (delta > 2*one_usec) {
- long realdelta;
- if (!buggy) {
- buggy = 1;
- printk("\n");
- }
- realdelta = delta / one_usec;
- if (tsc_values[i] < avg)
- realdelta = -realdelta;
-
- printk("BIOS BUG: CPU#%d improperly initialized, has %ld usecs TSC skew! FIXED.\n",
- i, realdelta);
- }
+ if (init)
+ _raw_spin_lock(&tsc_sync_lock);
+ else
+ _raw_spin_unlock(&tsc_sync_lock);
+ atomic_set(&tsc_flag, 0);
+}
- sum += delta;
- }
- if (!buggy)
- printk("passed.\n");
+/*
+ * Synchronize TSC on AP with BP.
+ */
+static void __cpuinit __sync_tsc_ap(void)
+{
+ if (!cpu_has_tsc)
+ return;
+ Dprintk("AP %d syncing TSC\n", smp_processor_id());
+
+ while (atomic_read(&tsc_flag) != 0)
+ cpu_relax();
+ atomic_inc(&tsc_flag);
+ mb();
+ _raw_spin_lock(&tsc_sync_lock);
+ wrmsrl(MSR_IA32_TSC, bp_tsc);
+ _raw_spin_unlock(&tsc_sync_lock);
+ rdtscll(ap_tsc);
+ mb();
+ atomic_inc(&tsc_flag);
+ mb();
}
-static void __init synchronize_tsc_ap (void)
+static void __cpuinit sync_tsc_ap(void)
{
int i;
+ for (i = 0; i < NR_LOOPS; i++)
+ __sync_tsc_ap();
+}
- /*
- * Not every cpu is online at the time
- * this gets called, so we first wait for the BP to
- * finish SMP initialization:
- */
- while (!atomic_read(&tsc_start_flag)) mb();
-
- for (i = 0; i < NR_LOOPS; i++) {
- atomic_inc(&tsc_count_start);
- while (atomic_read(&tsc_count_start) != num_booting_cpus()) mb();
+/*
+ * Synchronize TSC from BP to AP.
+ */
+static void __cpuinit __sync_tsc_bp(int cpu)
+{
+ if (!cpu_has_tsc)
+ return;
- sync_core();
- rdtscll(tsc_values[smp_processor_id()]);
- if (i == NR_LOOPS-1)
- write_tsc(0, 0);
+ /* Wait for AP */
+ while (atomic_read(&tsc_flag) == 0)
+ cpu_relax();
+ /* Save BPs TSC */
+ sync_core();
+ rdtscll(bp_tsc);
+ /* Don't do the sync core here to avoid too much latency. */
+ mb();
+ /* Start the AP */
+ _raw_spin_unlock(&tsc_sync_lock);
+ /* Wait for AP again */
+ while (atomic_read(&tsc_flag) < 2)
+ cpu_relax();
+ rdtscl(bp_tsc);
+ barrier();
+}
- atomic_inc(&tsc_count_stop);
- while (atomic_read(&tsc_count_stop) != num_booting_cpus()) mb();
+static void __cpuinit sync_tsc_bp(int cpu)
+{
+ int i;
+ for (i = 0; i < NR_LOOPS - 1; i++) {
+ __sync_tsc_bp(cpu);
+ sync_tsc_bp_init(1);
}
+ __sync_tsc_bp(cpu);
+ printk(KERN_INFO "Synced TSC of CPU %d difference %Ld\n",
+ cpu, ap_tsc - bp_tsc);
}
-#undef NR_LOOPS
-static atomic_t init_deasserted;
+static atomic_t init_deasserted __cpuinitdata;
-static void __init smp_callin(void)
+/*
+ * Report back to the Boot Processor.
+ * Running on AP.
+ */
+void __cpuinit smp_callin(void)
{
int cpuid, phys_id;
unsigned long timeout;
@@ -259,7 +233,8 @@ static void __init smp_callin(void)
* our local APIC. We have to wait for the IPI or we'll
* lock up on an APIC access.
*/
- while (!atomic_read(&init_deasserted));
+ while (!atomic_read(&init_deasserted))
+ cpu_relax();
/*
* (This works even if the APIC is not enabled.)
@@ -290,7 +265,7 @@ static void __init smp_callin(void)
*/
if (cpu_isset(cpuid, cpu_callout_map))
break;
- rep_nop();
+ cpu_relax();
}
if (!time_before(jiffies, timeout)) {
@@ -325,20 +300,12 @@ static void __init smp_callin(void)
* Allow the master to continue.
*/
cpu_set(cpuid, cpu_callin_map);
-
- /*
- * Synchronize the TSC with the BP
- */
- if (cpu_has_tsc)
- synchronize_tsc_ap();
}
-static int cpucount;
-
/*
- * Activate a secondary processor.
+ * Setup code on secondary processor (after comming out of the trampoline)
*/
-void __init start_secondary(void)
+void __cpuinit start_secondary(void)
{
/*
* Dont put anything before smp_callin(), SMP
@@ -348,17 +315,18 @@ void __init start_secondary(void)
cpu_init();
smp_callin();
+ /*
+ * Synchronize the TSC with the BP
+ */
+ sync_tsc_ap();
+
/* otherwise gcc will move up the smp_processor_id before the cpu_init */
barrier();
- Dprintk("cpu %d: waiting for commence\n", smp_processor_id());
- while (!cpu_isset(smp_processor_id(), smp_commenced_mask))
- rep_nop();
-
Dprintk("cpu %d: setting up apic clock\n", smp_processor_id());
setup_secondary_APIC_clock();
- Dprintk("cpu %d: enabling apic timer\n", smp_processor_id());
+ Dprintk("cpu %d: enabling apic timer\n", smp_processor_id());
if (nmi_watchdog == NMI_IO_APIC) {
disable_8259A_irq(0);
@@ -367,26 +335,22 @@ void __init start_secondary(void)
}
- enable_APIC_timer();
+ enable_APIC_timer();
/*
- * low-memory mappings have been cleared, flush them from
- * the local TLBs too.
+ * Allow the master to continue.
*/
- local_flush_tlb();
-
- Dprintk("cpu %d eSetting cpu_online_map\n", smp_processor_id());
cpu_set(smp_processor_id(), cpu_online_map);
- wmb();
-
+ mb();
+
cpu_idle();
}
-extern volatile unsigned long init_rsp;
+extern volatile unsigned long init_rsp;
extern void (*initial_code)(void);
#if APIC_DEBUG
-static inline void inquire_remote_apic(int apicid)
+static void inquire_remote_apic(int apicid)
{
unsigned i, regs[] = { APIC_ID >> 4, APIC_LVR >> 4, APIC_SPIV >> 4 };
char *names[] = { "ID", "VERSION", "SPIV" };
@@ -423,7 +387,10 @@ static inline void inquire_remote_apic(int apicid)
}
#endif
-static int __init wakeup_secondary_via_INIT(int phys_apicid, unsigned int start_rip)
+/*
+ * Kick the secondary to wake up.
+ */
+static int __cpuinit wakeup_secondary_via_INIT(int phys_apicid, unsigned int start_rip)
{
unsigned long send_status = 0, accept_status = 0;
int maxlvt, timeout, num_starts, j;
@@ -546,33 +513,36 @@ static int __init wakeup_secondary_via_INIT(int phys_apicid, unsigned int start_
return (send_status | accept_status);
}
-static void __init do_boot_cpu (int apicid)
+/*
+ * Boot one CPU.
+ */
+static int __cpuinit do_boot_cpu(int cpu, int apicid)
{
struct task_struct *idle;
unsigned long boot_error;
- int timeout, cpu;
+ int timeout;
unsigned long start_rip;
-
- cpu = ++cpucount;
/*
* We can't use kernel_thread since we must avoid to
* reschedule the child.
*/
idle = fork_idle(cpu);
- if (IS_ERR(idle))
- panic("failed fork for CPU %d", cpu);
+ if (IS_ERR(idle)) {
+ printk("failed fork for CPU %d\n", cpu);
+ return PTR_ERR(idle);
+ }
x86_cpu_to_apicid[cpu] = apicid;
cpu_pda[cpu].pcurrent = idle;
start_rip = setup_trampoline();
- init_rsp = idle->thread.rsp;
+ init_rsp = idle->thread.rsp;
per_cpu(init_tss,cpu).rsp0 = init_rsp;
initial_code = start_secondary;
clear_ti_thread_flag(idle->thread_info, TIF_FORK);
- printk(KERN_INFO "Booting processor %d/%d rip %lx rsp %lx\n", cpu, apicid,
+ printk(KERN_INFO "Booting processor %d/%d rip %lx rsp %lx\n", cpu, apicid,
start_rip, init_rsp);
/*
@@ -609,7 +579,7 @@ static void __init do_boot_cpu (int apicid)
/*
* Starting actual IPI sequence...
*/
- boot_error = wakeup_secondary_via_INIT(apicid, start_rip);
+ boot_error = wakeup_secondary_via_INIT(apicid, start_rip);
if (!boot_error) {
/*
@@ -650,58 +620,131 @@ static void __init do_boot_cpu (int apicid)
if (boot_error) {
cpu_clear(cpu, cpu_callout_map); /* was set here (do_boot_cpu()) */
clear_bit(cpu, &cpu_initialized); /* was set by cpu_init() */
- cpucount--;
+ cpu_clear(cpu, cpu_present_map);
+ cpu_clear(cpu, cpu_possible_map);
x86_cpu_to_apicid[cpu] = BAD_APICID;
x86_cpu_to_log_apicid[cpu] = BAD_APICID;
+ return -EIO;
}
+
+ return 0;
}
-static void smp_tune_scheduling (void)
+cycles_t cacheflush_time;
+unsigned long cache_decay_ticks;
+
+/*
+ * Construct cpu_sibling_map[], so that we can tell the sibling CPU
+ * on SMT systems efficiently.
+ */
+static __cpuinit void detect_siblings(void)
{
- int cachesize; /* kB */
- unsigned long bandwidth = 1000; /* MB/s */
- /*
- * Rough estimation for SMP scheduling, this is the number of
- * cycles it takes for a fully memory-limited process to flush
- * the SMP-local cache.
- *
- * (For a P5 this pretty much means we will choose another idle
- * CPU almost always at wakeup time (this is due to the small
- * L1 cache), on PIIs it's around 50-100 usecs, depending on
- * the cache size)
- */
+ int cpu;
- if (!cpu_khz) {
- return;
- } else {
- cachesize = boot_cpu_data.x86_cache_size;
- if (cachesize == -1) {
- cachesize = 16; /* Pentiums, 2x8kB cache */
- bandwidth = 100;
+ for (cpu = 0; cpu < NR_CPUS; cpu++) {
+ cpus_clear(cpu_sibling_map[cpu]);
+ cpus_clear(cpu_core_map[cpu]);
+ }
+
+ for_each_online_cpu (cpu) {
+ struct cpuinfo_x86 *c = cpu_data + cpu;
+ int siblings = 0;
+ int i;
+ if (smp_num_siblings > 1) {
+ for_each_online_cpu (i) {
+ if (cpu_core_id[cpu] == phys_proc_id[i]) {
+ siblings++;
+ cpu_set(i, cpu_sibling_map[cpu]);
+ }
+ }
+ } else {
+ siblings++;
+ cpu_set(cpu, cpu_sibling_map[cpu]);
+ }
+
+ if (siblings != smp_num_siblings) {
+ printk(KERN_WARNING
+ "WARNING: %d siblings found for CPU%d, should be %d\n",
+ siblings, cpu, smp_num_siblings);
+ smp_num_siblings = siblings;
}
+ if (c->x86_num_cores > 1) {
+ for_each_online_cpu(i) {
+ if (phys_proc_id[cpu] == phys_proc_id[i])
+ cpu_set(i, cpu_core_map[cpu]);
+ }
+ } else
+ cpu_core_map[cpu] = cpu_sibling_map[cpu];
}
}
/*
- * Cycle through the processors sending APIC IPIs to boot each.
+ * Cleanup possible dangling ends...
*/
-
-static void __init smp_boot_cpus(unsigned int max_cpus)
+static __cpuinit void smp_cleanup_boot(void)
{
- unsigned apicid, cpu, bit, kicked;
+ /*
+ * Paranoid: Set warm reset code and vector here back
+ * to default values.
+ */
+ CMOS_WRITE(0, 0xf);
- nmi_watchdog_default();
+ /*
+ * Reset trampoline flag
+ */
+ *((volatile int *) phys_to_virt(0x467)) = 0;
+#ifndef CONFIG_HOTPLUG_CPU
/*
- * Setup boot CPU information
+ * Free pages reserved for SMP bootup.
+ * When you add hotplug CPU support later remove this
+ * Note there is more work to be done for later CPU bootup.
*/
- smp_store_cpu_info(0); /* Final full version of the data */
- printk(KERN_INFO "CPU%d: ", 0);
- print_cpu_info(&cpu_data[0]);
- current_thread_info()->cpu = 0;
- smp_tune_scheduling();
+ free_page((unsigned long) __va(PAGE_SIZE));
+ free_page((unsigned long) __va(SMP_TRAMPOLINE_BASE));
+#endif
+}
+
+/*
+ * Fall back to non SMP mode after errors.
+ *
+ * RED-PEN audit/test this more. I bet there is more state messed up here.
+ */
+static __cpuinit void disable_smp(void)
+{
+ cpu_present_map = cpumask_of_cpu(0);
+ cpu_possible_map = cpumask_of_cpu(0);
+ if (smp_found_config)
+ phys_cpu_present_map = physid_mask_of_physid(boot_cpu_id);
+ else
+ phys_cpu_present_map = physid_mask_of_physid(0);
+ cpu_set(0, cpu_sibling_map[0]);
+ cpu_set(0, cpu_core_map[0]);
+}
+
+/*
+ * Handle user cpus=... parameter.
+ */
+static __cpuinit void enforce_max_cpus(unsigned max_cpus)
+{
+ int i, k;
+ k = 0;
+ for (i = 0; i < NR_CPUS; i++) {
+ if (!cpu_possible(i))
+ continue;
+ if (++k > max_cpus) {
+ cpu_clear(i, cpu_possible_map);
+ cpu_clear(i, cpu_present_map);
+ }
+ }
+}
+/*
+ * Various sanity checks.
+ */
+static int __cpuinit smp_sanity_check(unsigned max_cpus)
+{
if (!physid_isset(hard_smp_processor_id(), phys_cpu_present_map)) {
printk("weird, boot CPU (#%d) not listed by the BIOS.\n",
hard_smp_processor_id());
@@ -714,15 +757,11 @@ static void __init smp_boot_cpus(unsigned int max_cpus)
*/
if (!smp_found_config) {
printk(KERN_NOTICE "SMP motherboard not detected.\n");
- io_apic_irqs = 0;
- cpu_online_map = cpumask_of_cpu(0);
- cpu_set(0, cpu_sibling_map[0]);
- cpu_set(0, cpu_core_map[0]);
- phys_cpu_present_map = physid_mask_of_physid(0);
+ disable_smp();
if (APIC_init_uniprocessor())
printk(KERN_NOTICE "Local APIC not detected."
" Using dummy APIC emulation.\n");
- goto smp_done;
+ return -1;
}
/*
@@ -742,213 +781,146 @@ static void __init smp_boot_cpus(unsigned int max_cpus)
printk(KERN_ERR "BIOS bug, local APIC #%d not detected!...\n",
boot_cpu_id);
printk(KERN_ERR "... forcing use of dummy APIC emulation. (tell your hw vendor)\n");
- io_apic_irqs = 0;
- cpu_online_map = cpumask_of_cpu(0);
- cpu_set(0, cpu_sibling_map[0]);
- cpu_set(0, cpu_core_map[0]);
- phys_cpu_present_map = physid_mask_of_physid(0);
- disable_apic = 1;
- goto smp_done;
+ nr_ioapics = 0;
+ return -1;
}
- verify_local_APIC();
-
/*
* If SMP should be disabled, then really disable it!
*/
if (!max_cpus) {
- smp_found_config = 0;
printk(KERN_INFO "SMP mode deactivated, forcing use of dummy APIC emulation.\n");
- io_apic_irqs = 0;
- cpu_online_map = cpumask_of_cpu(0);
- cpu_set(0, cpu_sibling_map[0]);
- cpu_set(0, cpu_core_map[0]);
- phys_cpu_present_map = physid_mask_of_physid(0);
- disable_apic = 1;
- goto smp_done;
+ nr_ioapics = 0;
+ return -1;
}
- connect_bsp_APIC();
- setup_local_APIC();
-
- if (GET_APIC_ID(apic_read(APIC_ID)) != boot_cpu_id)
- BUG();
-
- x86_cpu_to_apicid[0] = boot_cpu_id;
-
- /*
- * Now scan the CPU present map and fire up the other CPUs.
- */
- Dprintk("CPU present map: %lx\n", physids_coerce(phys_cpu_present_map));
+ return 0;
+}
- kicked = 1;
- for (bit = 0; kicked < NR_CPUS && bit < MAX_APICS; bit++) {
- apicid = cpu_present_to_apicid(bit);
- /*
- * Don't even attempt to start the boot CPU!
- */
- if (apicid == boot_cpu_id || (apicid == BAD_APICID))
- continue;
+/*
+ * Prepare for SMP bootup. The MP table or ACPI has been read
+ * earlier. Just do some sanity checking here and enable APIC mode.
+ */
+void __cpuinit smp_prepare_cpus(unsigned int max_cpus)
+{
+ int i;
- if (!physid_isset(apicid, phys_cpu_present_map))
- continue;
- if ((max_cpus >= 0) && (max_cpus <= cpucount+1))
- continue;
+ nmi_watchdog_default();
+ current_cpu_data = boot_cpu_data;
+ current_thread_info()->cpu = 0; /* needed? */
- do_boot_cpu(apicid);
- ++kicked;
- }
+ enforce_max_cpus(max_cpus);
/*
- * Cleanup possible dangling ends...
+ * Fill in cpu_present_mask
*/
- {
- /*
- * Install writable page 0 entry to set BIOS data area.
- */
- local_flush_tlb();
-
- /*
- * Paranoid: Set warm reset code and vector here back
- * to default values.
- */
- CMOS_WRITE(0, 0xf);
-
- *((volatile int *) phys_to_virt(0x467)) = 0;
+ for (i = 0; i < NR_CPUS; i++) {
+ int apicid = cpu_present_to_apicid(i);
+ if (physid_isset(apicid, phys_cpu_present_map)) {
+ cpu_set(i, cpu_present_map);
+ /* possible map would be different if we supported real
+ CPU hotplug. */
+ cpu_set(i, cpu_possible_map);
+ }
}
- /*
- * Allow the user to impress friends.
- */
-
- Dprintk("Before bogomips.\n");
- if (!cpucount) {
- printk(KERN_INFO "Only one processor found.\n");
- } else {
- unsigned long bogosum = 0;
- for (cpu = 0; cpu < NR_CPUS; cpu++)
- if (cpu_isset(cpu, cpu_callout_map))
- bogosum += cpu_data[cpu].loops_per_jiffy;
- printk(KERN_INFO "Total of %d processors activated (%lu.%02lu BogoMIPS).\n",
- cpucount+1,
- bogosum/(500000/HZ),
- (bogosum/(5000/HZ))%100);
- Dprintk("Before bogocount - setting activated=1.\n");
+ if (smp_sanity_check(max_cpus) < 0) {
+ printk(KERN_INFO "SMP disabled\n");
+ disable_smp();
+ return;
}
+
/*
- * Construct cpu_sibling_map[], so that we can tell the
- * sibling CPU efficiently.
+ * Switch from PIC to APIC mode.
*/
- for (cpu = 0; cpu < NR_CPUS; cpu++) {
- cpus_clear(cpu_sibling_map[cpu]);
- cpus_clear(cpu_core_map[cpu]);
- }
-
- for (cpu = 0; cpu < NR_CPUS; cpu++) {
- struct cpuinfo_x86 *c = cpu_data + cpu;
- int siblings = 0;
- int i;
- if (!cpu_isset(cpu, cpu_callout_map))
- continue;
-
- if (smp_num_siblings > 1) {
- for (i = 0; i < NR_CPUS; i++) {
- if (!cpu_isset(i, cpu_callout_map))
- continue;
- if (phys_proc_id[cpu] == cpu_core_id[i]) {
- siblings++;
- cpu_set(i, cpu_sibling_map[cpu]);
- }
- }
- } else {
- siblings++;
- cpu_set(cpu, cpu_sibling_map[cpu]);
- }
+ connect_bsp_APIC();
+ setup_local_APIC();
- if (siblings != smp_num_siblings) {
- printk(KERN_WARNING
- "WARNING: %d siblings found for CPU%d, should be %d\n",
- siblings, cpu, smp_num_siblings);
- smp_num_siblings = siblings;
- }
- if (c->x86_num_cores > 1) {
- for (i = 0; i < NR_CPUS; i++) {
- if (!cpu_isset(i, cpu_callout_map))
- continue;
- if (phys_proc_id[cpu] == phys_proc_id[i]) {
- cpu_set(i, cpu_core_map[cpu]);
- }
- }
- } else
- cpu_core_map[cpu] = cpu_sibling_map[cpu];
+ if (GET_APIC_ID(apic_read(APIC_ID)) != boot_cpu_id) {
+ panic("Boot APIC ID in local APIC unexpected (%d vs %d)",
+ GET_APIC_ID(apic_read(APIC_ID)), boot_cpu_id);
+ /* Or can we switch back to PIC here? */
}
-
- Dprintk("Boot done.\n");
+ x86_cpu_to_apicid[0] = boot_cpu_id;
/*
- * Here we can be sure that there is an IO-APIC in the system. Let's
- * go and set it up:
+ * Now start the IO-APICs
*/
if (!skip_ioapic_setup && nr_ioapics)
setup_IO_APIC();
else
nr_ioapics = 0;
- setup_boot_APIC_clock();
-
/*
- * Synchronize the TSC with the AP
+ * Set up local APIC timer on boot CPU.
*/
- if (cpu_has_tsc && cpucount)
- synchronize_tsc_bp();
- smp_done:
- time_init_smp();
+ setup_boot_APIC_clock();
}
-/* These are wrappers to interface to the new boot process. Someone
- who understands all this stuff should rewrite it properly. --RR 15/Jul/02 */
-void __init smp_prepare_cpus(unsigned int max_cpus)
+/*
+ * Early setup to make printk work.
+ */
+void __init smp_prepare_boot_cpu(void)
{
- smp_boot_cpus(max_cpus);
+ int me = smp_processor_id();
+ cpu_set(me, cpu_online_map);
+ cpu_set(me, cpu_callout_map);
}
-void __devinit smp_prepare_boot_cpu(void)
+/*
+ * Entry point to boot a CPU.
+ *
+ * This is all __cpuinit, not __devinit for now because we don't support
+ * CPU hotplug (yet).
+ */
+int __cpuinit __cpu_up(unsigned int cpu)
{
- cpu_set(smp_processor_id(), cpu_online_map);
- cpu_set(smp_processor_id(), cpu_callout_map);
-}
+ int err;
+ int apicid = cpu_present_to_apicid(cpu);
-int __devinit __cpu_up(unsigned int cpu)
-{
- /* This only works at boot for x86. See "rewrite" above. */
- if (cpu_isset(cpu, smp_commenced_mask)) {
- local_irq_enable();
- return -ENOSYS;
- }
+ WARN_ON(irqs_disabled());
- /* In case one didn't come up */
- if (!cpu_isset(cpu, cpu_callin_map)) {
- local_irq_enable();
- return -EIO;
+ Dprintk("++++++++++++++++++++=_---CPU UP %u\n", cpu);
+
+ if (apicid == BAD_APICID || apicid == boot_cpu_id ||
+ !physid_isset(apicid, phys_cpu_present_map)) {
+ printk("__cpu_up: bad cpu %d\n", cpu);
+ return -EINVAL;
+ }
+ sync_tsc_bp_init(1);
+
+ /* Boot it! */
+ err = do_boot_cpu(cpu, apicid);
+ if (err < 0) {
+ sync_tsc_bp_init(0);
+ Dprintk("do_boot_cpu failed %d\n", err);
+ return err;
}
- local_irq_enable();
+
+ sync_tsc_bp(cpu);
/* Unleash the CPU! */
Dprintk("waiting for cpu %d\n", cpu);
- cpu_set(cpu, smp_commenced_mask);
while (!cpu_isset(cpu, cpu_online_map))
- mb();
+ cpu_relax();
return 0;
}
-void __init smp_cpus_done(unsigned int max_cpus)
+/*
+ * Finish the SMP boot.
+ */
+void __cpuinit smp_cpus_done(unsigned int max_cpus)
{
+ zap_low_mappings();
+ smp_cleanup_boot();
+
#ifdef CONFIG_X86_IO_APIC
setup_ioapic_dest();
#endif
- zap_low_mappings();
-}
+ detect_siblings();
+ time_init_gtod();
+}
diff --git a/arch/x86_64/kernel/time.c b/arch/x86_64/kernel/time.c
index c7a1b50b4af..943a9bfba20 100644
--- a/arch/x86_64/kernel/time.c
+++ b/arch/x86_64/kernel/time.c
@@ -916,9 +916,16 @@ void __init time_init(void)
setup_irq(0, &irq0);
set_cyc2ns_scale(cpu_khz / 1000);
+
+#ifndef CONFIG_SMP
+ time_init_gtod();
+#endif
}
-void __init time_init_smp(void)
+/*
+ * Decide after all CPUs are booted what mode gettimeofday should use.
+ */
+void __init time_init_gtod(void)
{
char *timetype;