diff options
Diffstat (limited to 'arch/arm/mach-at91')
93 files changed, 4222 insertions, 163 deletions
diff --git a/arch/arm/mach-at91/at91cap9.c b/arch/arm/mach-at91/at91cap9.c index 933fa8f55cb..638948c1677 100644 --- a/arch/arm/mach-at91/at91cap9.c +++ b/arch/arm/mach-at91/at91cap9.c @@ -17,10 +17,10 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <asm/arch/at91cap9.h> -#include <asm/arch/at91_pmc.h> -#include <asm/arch/at91_rstc.h> -#include <asm/arch/at91_shdwc.h> +#include <mach/at91cap9.h> +#include <mach/at91_pmc.h> +#include <mach/at91_rstc.h> +#include <mach/at91_shdwc.h> #include "generic.h" #include "clock.h" diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c index 25765f1afca..abb4aac8fa9 100644 --- a/arch/arm/mach-at91/at91cap9_devices.c +++ b/arch/arm/mach-at91/at91cap9_devices.c @@ -20,11 +20,11 @@ #include <video/atmel_lcdc.h> -#include <asm/arch/board.h> -#include <asm/arch/gpio.h> -#include <asm/arch/at91cap9.h> -#include <asm/arch/at91cap9_matrix.h> -#include <asm/arch/at91sam9_smc.h> +#include <mach/board.h> +#include <mach/gpio.h> +#include <mach/at91cap9.h> +#include <mach/at91cap9_matrix.h> +#include <mach/at91sam9_smc.h> #include "generic.h" diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c index d688c1dbd92..28594fcc88e 100644 --- a/arch/arm/mach-at91/at91rm9200.c +++ b/arch/arm/mach-at91/at91rm9200.c @@ -14,9 +14,9 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <asm/arch/at91rm9200.h> -#include <asm/arch/at91_pmc.h> -#include <asm/arch/at91_st.h> +#include <mach/at91rm9200.h> +#include <mach/at91_pmc.h> +#include <mach/at91_st.h> #include "generic.h" #include "clock.h" diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index d2c5c84bf6b..9338825cfcd 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -17,10 +17,10 @@ #include <linux/platform_device.h> #include <linux/i2c-gpio.h> -#include <asm/arch/board.h> -#include <asm/arch/gpio.h> -#include <asm/arch/at91rm9200.h> -#include <asm/arch/at91rm9200_mc.h> +#include <mach/board.h> +#include <mach/gpio.h> +#include <mach/at91rm9200.h> +#include <mach/at91rm9200_mc.h> #include "generic.h" diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c index 50392ff7151..a72e798a2a4 100644 --- a/arch/arm/mach-at91/at91rm9200_time.c +++ b/arch/arm/mach-at91/at91rm9200_time.c @@ -26,7 +26,7 @@ #include <asm/mach/time.h> -#include <asm/arch/at91_st.h> +#include <mach/at91_st.h> static unsigned long last_crtr; static u32 irqmask; diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c index 380f12a1220..accb69ec478 100644 --- a/arch/arm/mach-at91/at91sam9260.c +++ b/arch/arm/mach-at91/at91sam9260.c @@ -15,11 +15,11 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <asm/arch/cpu.h> -#include <asm/arch/at91sam9260.h> -#include <asm/arch/at91_pmc.h> -#include <asm/arch/at91_rstc.h> -#include <asm/arch/at91_shdwc.h> +#include <mach/cpu.h> +#include <mach/at91sam9260.h> +#include <mach/at91_pmc.h> +#include <mach/at91_rstc.h> +#include <mach/at91_shdwc.h> #include "generic.h" #include "clock.h" diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index f5fec0a9cf4..7774d17dde7 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -16,12 +16,12 @@ #include <linux/platform_device.h> #include <linux/i2c-gpio.h> -#include <asm/arch/board.h> -#include <asm/arch/gpio.h> -#include <asm/arch/cpu.h> -#include <asm/arch/at91sam9260.h> -#include <asm/arch/at91sam9260_matrix.h> -#include <asm/arch/at91sam9_smc.h> +#include <mach/board.h> +#include <mach/gpio.h> +#include <mach/cpu.h> +#include <mach/at91sam9260.h> +#include <mach/at91sam9260_matrix.h> +#include <mach/at91sam9_smc.h> #include "generic.h" diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c index 35bf6fd5251..7b51a59ae8b 100644 --- a/arch/arm/mach-at91/at91sam9261.c +++ b/arch/arm/mach-at91/at91sam9261.c @@ -15,10 +15,10 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <asm/arch/at91sam9261.h> -#include <asm/arch/at91_pmc.h> -#include <asm/arch/at91_rstc.h> -#include <asm/arch/at91_shdwc.h> +#include <mach/at91sam9261.h> +#include <mach/at91_pmc.h> +#include <mach/at91_rstc.h> +#include <mach/at91_shdwc.h> #include "generic.h" #include "clock.h" diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index b80860e3138..6b89172310c 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -20,11 +20,11 @@ #include <linux/fb.h> #include <video/atmel_lcdc.h> -#include <asm/arch/board.h> -#include <asm/arch/gpio.h> -#include <asm/arch/at91sam9261.h> -#include <asm/arch/at91sam9261_matrix.h> -#include <asm/arch/at91sam9_smc.h> +#include <mach/board.h> +#include <mach/gpio.h> +#include <mach/at91sam9261.h> +#include <mach/at91sam9261_matrix.h> +#include <mach/at91sam9_smc.h> #include "generic.h" diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c index 052074a9f2d..80bfab5680e 100644 --- a/arch/arm/mach-at91/at91sam9263.c +++ b/arch/arm/mach-at91/at91sam9263.c @@ -15,10 +15,10 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <asm/arch/at91sam9263.h> -#include <asm/arch/at91_pmc.h> -#include <asm/arch/at91_rstc.h> -#include <asm/arch/at91_shdwc.h> +#include <mach/at91sam9263.h> +#include <mach/at91_pmc.h> +#include <mach/at91_rstc.h> +#include <mach/at91_shdwc.h> #include "generic.h" #include "clock.h" diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index 42108d02f59..c93992f55dc 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -19,11 +19,11 @@ #include <linux/fb.h> #include <video/atmel_lcdc.h> -#include <asm/arch/board.h> -#include <asm/arch/gpio.h> -#include <asm/arch/at91sam9263.h> -#include <asm/arch/at91sam9263_matrix.h> -#include <asm/arch/at91sam9_smc.h> +#include <mach/board.h> +#include <mach/gpio.h> +#include <mach/at91sam9263.h> +#include <mach/at91sam9263_matrix.h> +#include <mach/at91sam9_smc.h> #include "generic.h" diff --git a/arch/arm/mach-at91/at91sam926x_time.c b/arch/arm/mach-at91/at91sam926x_time.c index 5cecbd7de6a..122fd77ed58 100644 --- a/arch/arm/mach-at91/at91sam926x_time.c +++ b/arch/arm/mach-at91/at91sam926x_time.c @@ -17,7 +17,7 @@ #include <asm/mach/time.h> -#include <asm/arch/at91_pit.h> +#include <mach/at91_pit.h> #define PIT_CPIV(x) ((x) & AT91_PIT_CPIV) diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c index 902c79893ec..556bddf35b4 100644 --- a/arch/arm/mach-at91/at91sam9rl.c +++ b/arch/arm/mach-at91/at91sam9rl.c @@ -14,11 +14,11 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <asm/arch/cpu.h> -#include <asm/arch/at91sam9rl.h> -#include <asm/arch/at91_pmc.h> -#include <asm/arch/at91_rstc.h> -#include <asm/arch/at91_shdwc.h> +#include <mach/cpu.h> +#include <mach/at91sam9rl.h> +#include <mach/at91_pmc.h> +#include <mach/at91_rstc.h> +#include <mach/at91_shdwc.h> #include "generic.h" #include "clock.h" diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index 9c61576f1c8..620886341fb 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -16,11 +16,11 @@ #include <linux/fb.h> #include <video/atmel_lcdc.h> -#include <asm/arch/board.h> -#include <asm/arch/gpio.h> -#include <asm/arch/at91sam9rl.h> -#include <asm/arch/at91sam9rl_matrix.h> -#include <asm/arch/at91sam9_smc.h> +#include <mach/board.h> +#include <mach/gpio.h> +#include <mach/at91sam9rl.h> +#include <mach/at91sam9rl_matrix.h> +#include <mach/at91sam9_smc.h> #include "generic.h" diff --git a/arch/arm/mach-at91/at91x40.c b/arch/arm/mach-at91/at91x40.c index f44647738ee..ad3ec85b279 100644 --- a/arch/arm/mach-at91/at91x40.c +++ b/arch/arm/mach-at91/at91x40.c @@ -14,9 +14,9 @@ #include <linux/init.h> #include <linux/irq.h> #include <asm/mach/arch.h> -#include <asm/arch/at91x40.h> -#include <asm/arch/at91_st.h> -#include <asm/arch/timex.h> +#include <mach/at91x40.h> +#include <mach/at91_st.h> +#include <mach/timex.h> #include "generic.h" /* diff --git a/arch/arm/mach-at91/at91x40_time.c b/arch/arm/mach-at91/at91x40_time.c index 44690440e84..869b5e28d19 100644 --- a/arch/arm/mach-at91/at91x40_time.c +++ b/arch/arm/mach-at91/at91x40_time.c @@ -23,10 +23,10 @@ #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/time.h> -#include <asm/arch/hardware.h> +#include <mach/hardware.h> #include <asm/io.h> #include <asm/mach/time.h> -#include <asm/arch/at91_tc.h> +#include <mach/at91_tc.h> /* * 3 counter/timer units present. diff --git a/arch/arm/mach-at91/board-1arm.c b/arch/arm/mach-at91/board-1arm.c index fc0f293174c..9b27d167bff 100644 --- a/arch/arm/mach-at91/board-1arm.c +++ b/arch/arm/mach-at91/board-1arm.c @@ -24,7 +24,7 @@ #include <linux/module.h> #include <linux/platform_device.h> -#include <asm/arch/hardware.h> +#include <mach/hardware.h> #include <asm/setup.h> #include <asm/mach-types.h> #include <asm/irq.h> @@ -33,8 +33,8 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <asm/arch/board.h> -#include <asm/arch/gpio.h> +#include <mach/board.h> +#include <mach/gpio.h> #include "generic.h" diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c index 17faf3cea12..cdddca54b93 100644 --- a/arch/arm/mach-at91/board-cam60.c +++ b/arch/arm/mach-at91/board-cam60.c @@ -28,7 +28,7 @@ #include <linux/spi/spi.h> #include <linux/spi/flash.h> -#include <asm/arch/hardware.h> +#include <mach/hardware.h> #include <asm/setup.h> #include <asm/mach-types.h> #include <asm/irq.h> @@ -37,8 +37,8 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <asm/arch/board.h> -#include <asm/arch/gpio.h> +#include <mach/board.h> +#include <mach/gpio.h> #include "generic.h" diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c index fd21d4240e8..196199552eb 100644 --- a/arch/arm/mach-at91/board-cap9adk.c +++ b/arch/arm/mach-at91/board-cap9adk.c @@ -33,7 +33,7 @@ #include <video/atmel_lcdc.h> -#include <asm/arch/hardware.h> +#include <mach/hardware.h> #include <asm/setup.h> #include <asm/mach-types.h> #include <asm/irq.h> @@ -42,10 +42,10 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <asm/arch/board.h> -#include <asm/arch/gpio.h> -#include <asm/arch/at91cap9_matrix.h> -#include <asm/arch/at91sam9_smc.h> +#include <mach/board.h> +#include <mach/gpio.h> +#include <mach/at91cap9_matrix.h> +#include <mach/at91sam9_smc.h> #include "generic.h" diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c index 5156fd2883c..afa1ff0e957 100644 --- a/arch/arm/mach-at91/board-carmeva.c +++ b/arch/arm/mach-at91/board-carmeva.c @@ -25,7 +25,7 @@ #include <linux/module.h> #include <linux/platform_device.h> -#include <asm/arch/hardware.h> +#include <mach/hardware.h> #include <asm/setup.h> #include <asm/mach-types.h> #include <asm/irq.h> @@ -34,8 +34,8 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <asm/arch/board.h> -#include <asm/arch/gpio.h> +#include <mach/board.h> +#include <mach/gpio.h> #include "generic.h" diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c index a55e9ca80ef..cb7c9a8fa48 100644 --- a/arch/arm/mach-at91/board-csb337.c +++ b/arch/arm/mach-at91/board-csb337.c @@ -28,7 +28,7 @@ #include <linux/input.h> #include <linux/gpio_keys.h> -#include <asm/arch/hardware.h> +#include <mach/hardware.h> #include <asm/setup.h> #include <asm/mach-types.h> #include <asm/irq.h> @@ -37,8 +37,8 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <asm/arch/board.h> -#include <asm/arch/gpio.h> +#include <mach/board.h> +#include <mach/gpio.h> #include "generic.h" diff --git a/arch/arm/mach-at91/board-csb637.c b/arch/arm/mach-at91/board-csb637.c index dfdd4dda04a..8db8bd8babd 100644 --- a/arch/arm/mach-at91/board-csb637.c +++ b/arch/arm/mach-at91/board-csb637.c @@ -25,7 +25,7 @@ #include <linux/platform_device.h> #include <linux/mtd/physmap.h> -#include <asm/arch/hardware.h> +#include <mach/hardware.h> #include <asm/setup.h> #include <asm/mach-types.h> #include <asm/irq.h> @@ -34,8 +34,8 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <asm/arch/board.h> -#include <asm/arch/gpio.h> +#include <mach/board.h> +#include <mach/gpio.h> #include "generic.h" diff --git a/arch/arm/mach-at91/board-dk.c b/arch/arm/mach-at91/board-dk.c index 78b5c8b867e..43e1aa7ecef 100644 --- a/arch/arm/mach-at91/board-dk.c +++ b/arch/arm/mach-at91/board-dk.c @@ -29,7 +29,7 @@ #include <linux/spi/spi.h> #include <linux/mtd/physmap.h> -#include <asm/arch/hardware.h> +#include <mach/hardware.h> #include <asm/setup.h> #include <asm/mach-types.h> #include <asm/irq.h> @@ -38,9 +38,9 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <asm/arch/board.h> -#include <asm/arch/gpio.h> -#include <asm/arch/at91rm9200_mc.h> +#include <mach/board.h> +#include <mach/gpio.h> +#include <mach/at91rm9200_mc.h> #include "generic.h" diff --git a/arch/arm/mach-at91/board-eb01.c b/arch/arm/mach-at91/board-eb01.c index 631af0857d7..1f9d3cb64c5 100644 --- a/arch/arm/mach-at91/board-eb01.c +++ b/arch/arm/mach-at91/board-eb01.c @@ -24,10 +24,10 @@ #include <linux/platform_device.h> #include <linux/irq.h> #include <asm/mach-types.h> -#include <asm/arch/hardware.h> +#include <mach/hardware.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <asm/arch/board.h> +#include <mach/board.h> #include "generic.h" static void __init at91eb01_map_io(void) diff --git a/arch/arm/mach-at91/board-eb9200.c b/arch/arm/mach-at91/board-eb9200.c index 58ae7a6c240..528656761ff 100644 --- a/arch/arm/mach-at91/board-eb9200.c +++ b/arch/arm/mach-at91/board-eb9200.c @@ -25,7 +25,7 @@ #include <linux/module.h> #include <linux/device.h> -#include <asm/arch/hardware.h> +#include <mach/hardware.h> #include <asm/setup.h> #include <asm/mach-types.h> #include <asm/irq.h> @@ -34,8 +34,8 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <asm/arch/board.h> -#include <asm/arch/gpio.h> +#include <mach/board.h> +#include <mach/gpio.h> #include "generic.h" diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c index 665d3091baf..bfeee8a2af2 100644 --- a/arch/arm/mach-at91/board-ecbat91.c +++ b/arch/arm/mach-at91/board-ecbat91.c @@ -27,7 +27,7 @@ #include <linux/spi/spi.h> #include <linux/spi/flash.h> -#include <asm/arch/hardware.h> +#include <mach/hardware.h> #include <asm/setup.h> #include <asm/mach-types.h> #include <asm/irq.h> @@ -36,8 +36,8 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <asm/arch/board.h> -#include <asm/arch/gpio.h> +#include <mach/board.h> +#include <mach/gpio.h> #include "generic.h" diff --git a/arch/arm/mach-at91/board-ek.c b/arch/arm/mach-at91/board-ek.c index dbe79df1f0a..60626e7a349 100644 --- a/arch/arm/mach-at91/board-ek.c +++ b/arch/arm/mach-at91/board-ek.c @@ -29,7 +29,7 @@ #include <linux/spi/spi.h> #include <linux/mtd/physmap.h> -#include <asm/arch/hardware.h> +#include <mach/hardware.h> #include <asm/setup.h> #include <asm/mach-types.h> #include <asm/irq.h> @@ -38,9 +38,9 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <asm/arch/board.h> -#include <asm/arch/gpio.h> -#include <asm/arch/at91rm9200_mc.h> +#include <mach/board.h> +#include <mach/gpio.h> +#include <mach/at91rm9200_mc.h> #include "generic.h" diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c index 16577a06471..a87956c0a74 100644 --- a/arch/arm/mach-at91/board-kafa.c +++ b/arch/arm/mach-at91/board-kafa.c @@ -24,7 +24,7 @@ #include <linux/module.h> #include <linux/platform_device.h> -#include <asm/arch/hardware.h> +#include <mach/hardware.h> #include <asm/setup.h> #include <asm/mach-types.h> #include <asm/irq.h> @@ -33,8 +33,8 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <asm/arch/board.h> -#include <asm/arch/gpio.h> +#include <mach/board.h> +#include <mach/gpio.h> #include "generic.h" diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c index 6054e982e28..fe9b9913fa3 100644 --- a/arch/arm/mach-at91/board-kb9202.c +++ b/arch/arm/mach-at91/board-kb9202.c @@ -25,7 +25,7 @@ #include <linux/module.h> #include <linux/platform_device.h> -#include <asm/arch/hardware.h> +#include <mach/hardware.h> #include <asm/setup.h> #include <asm/mach-types.h> #include <asm/irq.h> @@ -34,10 +34,10 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <asm/arch/board.h> -#include <asm/arch/gpio.h> +#include <mach/board.h> +#include <mach/gpio.h> -#include <asm/arch/at91rm9200_mc.h> +#include <mach/at91rm9200_mc.h> #include "generic.h" diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c index ea39c6c186e..dbc912d633c 100644 --- a/arch/arm/mach-at91/board-picotux200.c +++ b/arch/arm/mach-at91/board-picotux200.c @@ -27,7 +27,7 @@ #include <linux/spi/spi.h> #include <linux/mtd/physmap.h> -#include <asm/arch/hardware.h> +#include <mach/hardware.h> #include <asm/setup.h> #include <asm/mach-types.h> #include <asm/irq.h> @@ -36,9 +36,9 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <asm/arch/board.h> -#include <asm/arch/gpio.h> -#include <asm/arch/at91rm9200_mc.h> +#include <mach/board.h> +#include <mach/gpio.h> +#include <mach/at91rm9200_mc.h> #include "generic.h" diff --git a/arch/arm/mach-at91/board-qil-a9260.c b/arch/arm/mach-at91/board-qil-a9260.c index 5393b8079bd..4c28413426c 100644 --- a/arch/arm/mach-at91/board-qil-a9260.c +++ b/arch/arm/mach-at91/board-qil-a9260.c @@ -30,7 +30,7 @@ #include <linux/input.h> #include <linux/clk.h> -#include <asm/arch/hardware.h> +#include <mach/hardware.h> #include <asm/setup.h> #include <asm/mach-types.h> #include <asm/irq.h> @@ -39,9 +39,9 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <asm/arch/board.h> -#include <asm/arch/gpio.h> -#include <asm/arch/at91_shdwc.h> +#include <mach/board.h> +#include <mach/gpio.h> +#include <mach/at91_shdwc.h> #include "generic.h" diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c index fe8a8ac89d6..e4910cb26c1 100644 --- a/arch/arm/mach-at91/board-sam9-l9260.c +++ b/arch/arm/mach-at91/board-sam9-l9260.c @@ -27,7 +27,7 @@ #include <linux/platform_device.h> #include <linux/spi/spi.h> -#include <asm/arch/hardware.h> +#include <mach/hardware.h> #include <asm/setup.h> #include <asm/mach-types.h> #include <asm/irq.h> @@ -36,8 +36,8 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <asm/arch/board.h> -#include <asm/arch/gpio.h> +#include <mach/board.h> +#include <mach/gpio.h> #include "generic.h" diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c index 6f3b377dc37..cb20e70b3b0 100644 --- a/arch/arm/mach-at91/board-sam9260ek.c +++ b/arch/arm/mach-at91/board-sam9260ek.c @@ -28,7 +28,7 @@ #include <linux/spi/at73c213.h> #include <linux/clk.h> -#include <asm/arch/hardware.h> +#include <mach/hardware.h> #include <asm/setup.h> #include <asm/mach-types.h> #include <asm/irq.h> @@ -37,8 +37,8 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <asm/arch/board.h> -#include <asm/arch/gpio.h> +#include <mach/board.h> +#include <mach/gpio.h> #include "generic.h" diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c index 9d3c65e79c3..1a9963b811c 100644 --- a/arch/arm/mach-at91/board-sam9261ek.c +++ b/arch/arm/mach-at91/board-sam9261ek.c @@ -35,7 +35,7 @@ #include <video/atmel_lcdc.h> -#include <asm/arch/hardware.h> +#include <mach/hardware.h> #include <asm/setup.h> #include <asm/mach-types.h> #include <asm/irq.h> @@ -44,9 +44,9 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <asm/arch/board.h> -#include <asm/arch/gpio.h> -#include <asm/arch/at91sam9_smc.h> +#include <mach/board.h> +#include <mach/gpio.h> +#include <mach/at91sam9_smc.h> #include "generic.h" diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c index 334b159285c..b1d11960a73 100644 --- a/arch/arm/mach-at91/board-sam9263ek.c +++ b/arch/arm/mach-at91/board-sam9263ek.c @@ -32,7 +32,7 @@ #include <video/atmel_lcdc.h> -#include <asm/arch/hardware.h> +#include <mach/hardware.h> #include <asm/setup.h> #include <asm/mach-types.h> #include <asm/irq.h> @@ -41,9 +41,9 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <asm/arch/board.h> -#include <asm/arch/gpio.h> -#include <asm/arch/at91sam9_smc.h> +#include <mach/board.h> +#include <mach/gpio.h> +#include <mach/at91sam9_smc.h> #include "generic.h" diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c index f0975bba6d5..d4eba5c0ce0 100644 --- a/arch/arm/mach-at91/board-sam9g20ek.c +++ b/arch/arm/mach-at91/board-sam9g20ek.c @@ -26,7 +26,7 @@ #include <linux/spi/at73c213.h> #include <linux/clk.h> -#include <asm/arch/hardware.h> +#include <mach/hardware.h> #include <asm/setup.h> #include <asm/mach-types.h> #include <asm/irq.h> @@ -35,8 +35,8 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <asm/arch/board.h> -#include <asm/arch/gpio.h> +#include <mach/board.h> +#include <mach/gpio.h> #include "generic.h" diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c index 5271200b6de..c6dce49c388 100644 --- a/arch/arm/mach-at91/board-sam9rlek.c +++ b/arch/arm/mach-at91/board-sam9rlek.c @@ -18,7 +18,7 @@ #include <video/atmel_lcdc.h> -#include <asm/arch/hardware.h> +#include <mach/hardware.h> #include <asm/setup.h> #include <asm/mach-types.h> #include <asm/irq.h> @@ -27,9 +27,9 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <asm/arch/board.h> -#include <asm/arch/gpio.h> -#include <asm/arch/at91sam9_smc.h> +#include <mach/board.h> +#include <mach/gpio.h> +#include <mach/at91sam9_smc.h> #include "generic.h" diff --git a/arch/arm/mach-at91/board-usb-a9260.c b/arch/arm/mach-at91/board-usb-a9260.c index 4048e47c519..f9d0b65da40 100644 --- a/arch/arm/mach-at91/board-usb-a9260.c +++ b/arch/arm/mach-at91/board-usb-a9260.c @@ -30,7 +30,7 @@ #include <linux/input.h> #include <linux/clk.h> -#include <asm/arch/hardware.h> +#include <mach/hardware.h> #include <asm/setup.h> #include <asm/mach-types.h> #include <asm/irq.h> @@ -39,9 +39,9 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <asm/arch/board.h> -#include <asm/arch/gpio.h> -#include <asm/arch/at91_shdwc.h> +#include <mach/board.h> +#include <mach/gpio.h> +#include <mach/at91_shdwc.h> #include "generic.h" diff --git a/arch/arm/mach-at91/board-usb-a9263.c b/arch/arm/mach-at91/board-usb-a9263.c index a2b94947f57..673e5c27214 100644 --- a/arch/arm/mach-at91/board-usb-a9263.c +++ b/arch/arm/mach-at91/board-usb-a9263.c @@ -29,7 +29,7 @@ #include <linux/gpio_keys.h> #include <linux/input.h> -#include <asm/arch/hardware.h> +#include <mach/hardware.h> #include <asm/setup.h> #include <asm/mach-types.h> #include <asm/irq.h> @@ -38,9 +38,9 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <asm/arch/board.h> -#include <asm/arch/gpio.h> -#include <asm/arch/at91_shdwc.h> +#include <mach/board.h> +#include <mach/gpio.h> +#include <mach/at91_shdwc.h> #include "generic.h" diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c index 0aa3ddaf3d6..36b380aad00 100644 --- a/arch/arm/mach-at91/board-yl-9200.c +++ b/arch/arm/mach-at91/board-yl-9200.c @@ -33,7 +33,7 @@ #include <linux/gpio_keys.h> #include <linux/input.h> -#include <asm/arch/hardware.h> +#include <mach/hardware.h> #include <asm/setup.h> #include <asm/mach-types.h> #include <asm/irq.h> @@ -42,9 +42,9 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <asm/arch/board.h> -#include <asm/arch/gpio.h> -#include <asm/arch/at91rm9200_mc.h> +#include <mach/board.h> +#include <mach/gpio.h> +#include <mach/at91rm9200_mc.h> #include "generic.h" diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c index daebd72a629..f5c2847161f 100644 --- a/arch/arm/mach-at91/clock.c +++ b/arch/arm/mach-at91/clock.c @@ -25,9 +25,9 @@ #include <asm/io.h> -#include <asm/arch/hardware.h> -#include <asm/arch/at91_pmc.h> -#include <asm/arch/cpu.h> +#include <mach/hardware.h> +#include <mach/at91_pmc.h> +#include <mach/cpu.h> #include "clock.h" diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c index 4db221e0345..8392d5b517f 100644 --- a/arch/arm/mach-at91/gpio.c +++ b/arch/arm/mach-at91/gpio.c @@ -20,9 +20,9 @@ #include <linux/module.h> #include <asm/io.h> -#include <asm/arch/hardware.h> -#include <asm/arch/at91_pio.h> -#include <asm/arch/gpio.h> +#include <mach/hardware.h> +#include <mach/at91_pio.h> +#include <mach/gpio.h> #include "generic.h" diff --git a/arch/arm/mach-at91/include/mach/at91_adc.h b/arch/arm/mach-at91/include/mach/at91_adc.h new file mode 100644 index 00000000000..8e7ed5c9081 --- /dev/null +++ b/arch/arm/mach-at91/include/mach/at91_adc.h @@ -0,0 +1,61 @@ +/* + * arch/arm/mach-at91/include/mach/at91_adc.h + * + * Copyright (C) SAN People + * + * Analog-to-Digital Converter (ADC) registers. + * Based on AT91SAM9260 datasheet revision D. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91_ADC_H +#define AT91_ADC_H + +#define AT91_ADC_CR 0x00 /* Control Register */ +#define AT91_ADC_SWRST (1 << 0) /* Software Reset */ +#define AT91_ADC_START (1 << 1) /* Start Conversion */ + +#define AT91_ADC_MR 0x04 /* Mode Register */ +#define AT91_ADC_TRGEN (1 << 0) /* Trigger Enable */ +#define AT91_ADC_TRGSEL (7 << 1) /* Trigger Selection */ +#define AT91_ADC_TRGSEL_TC0 (0 << 1) +#define AT91_ADC_TRGSEL_TC1 (1 << 1) +#define AT91_ADC_TRGSEL_TC2 (2 << 1) +#define AT91_ADC_TRGSEL_EXTERNAL (6 << 1) +#define AT91_ADC_LOWRES (1 << 4) /* Low Resolution */ +#define AT91_ADC_SLEEP (1 << 5) /* Sleep Mode */ +#define AT91_ADC_PRESCAL (0x3f << 8) /* Prescalar Rate Selection */ +#define AT91_ADC_PRESCAL_(x) ((x) << 8) +#define AT91_ADC_STARTUP (0x1f << 16) /* Startup Up Time */ +#define AT91_ADC_STARTUP_(x) ((x) << 16) +#define AT91_ADC_SHTIM (0xf << 24) /* Sample & Hold Time */ +#define AT91_ADC_SHTIM_(x) ((x) << 24) + +#define AT91_ADC_CHER 0x10 /* Channel Enable Register */ +#define AT91_ADC_CHDR 0x14 /* Channel Disable Register */ +#define AT91_ADC_CHSR 0x18 /* Channel Status Register */ +#define AT91_ADC_CH(n) (1 << (n)) /* Channel Number */ + +#define AT91_ADC_SR 0x1C /* Status Register */ +#define AT91_ADC_EOC(n) (1 << (n)) /* End of Conversion on Channel N */ +#define AT91_ADC_OVRE(n) (1 << ((n) + 8))/* Overrun Error on Channel N */ +#define AT91_ADC_DRDY (1 << 16) /* Data Ready */ +#define AT91_ADC_GOVRE (1 << 17) /* General Overrun Error */ +#define AT91_ADC_ENDRX (1 << 18) /* End of RX Buffer */ +#define AT91_ADC_RXFUFF (1 << 19) /* RX Buffer Full */ + +#define AT91_ADC_LCDR 0x20 /* Last Converted Data Register */ +#define AT91_ADC_LDATA (0x3ff) + +#define AT91_ADC_IER 0x24 /* Interrupt Enable Register */ +#define AT91_ADC_IDR 0x28 /* Interrupt Disable Register */ +#define AT91_ADC_IMR 0x2C /* Interrupt Mask Register */ + +#define AT91_ADC_CHR(n) (0x30 + ((n) * 4)) /* Channel Data Register N */ +#define AT91_ADC_DATA (0x3ff) + +#endif diff --git a/arch/arm/mach-at91/include/mach/at91_aic.h b/arch/arm/mach-at91/include/mach/at91_aic.h new file mode 100644 index 00000000000..03566799d3b --- /dev/null +++ b/arch/arm/mach-at91/include/mach/at91_aic.h @@ -0,0 +1,53 @@ +/* + * arch/arm/mach-at91/include/mach/at91_aic.h + * + * Copyright (C) 2005 Ivan Kokshaysky + * Copyright (C) SAN People + * + * Advanced Interrupt Controller (AIC) - System peripherals registers. + * Based on AT91RM9200 datasheet revision E. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91_AIC_H +#define AT91_AIC_H + +#define AT91_AIC_SMR(n) (AT91_AIC + ((n) * 4)) /* Source Mode Registers 0-31 */ +#define AT91_AIC_PRIOR (7 << 0) /* Priority Level */ +#define AT91_AIC_SRCTYPE (3 << 5) /* Interrupt Source Type */ +#define AT91_AIC_SRCTYPE_LOW (0 << 5) +#define AT91_AIC_SRCTYPE_FALLING (1 << 5) +#define AT91_AIC_SRCTYPE_HIGH (2 << 5) +#define AT91_AIC_SRCTYPE_RISING (3 << 5) + +#define AT91_AIC_SVR(n) (AT91_AIC + 0x80 + ((n) * 4)) /* Source Vector Registers 0-31 */ +#define AT91_AIC_IVR (AT91_AIC + 0x100) /* Interrupt Vector Register */ +#define AT91_AIC_FVR (AT91_AIC + 0x104) /* Fast Interrupt Vector Register */ +#define AT91_AIC_ISR (AT91_AIC + 0x108) /* Interrupt Status Register */ +#define AT91_AIC_IRQID (0x1f << 0) /* Current Interrupt Identifier */ + +#define AT91_AIC_IPR (AT91_AIC + 0x10c) /* Interrupt Pending Register */ +#define AT91_AIC_IMR (AT91_AIC + 0x110) /* Interrupt Mask Register */ +#define AT91_AIC_CISR (AT91_AIC + 0x114) /* Core Interrupt Status Register */ +#define AT91_AIC_NFIQ (1 << 0) /* nFIQ Status */ +#define AT91_AIC_NIRQ (1 << 1) /* nIRQ Status */ + +#define AT91_AIC_IECR (AT91_AIC + 0x120) /* Interrupt Enable Command Register */ +#define AT91_AIC_IDCR (AT91_AIC + 0x124) /* Interrupt Disable Command Register */ +#define AT91_AIC_ICCR (AT91_AIC + 0x128) /* Interrupt Clear Command Register */ +#define AT91_AIC_ISCR (AT91_AIC + 0x12c) /* Interrupt Set Command Register */ +#define AT91_AIC_EOICR (AT91_AIC + 0x130) /* End of Interrupt Command Register */ +#define AT91_AIC_SPU (AT91_AIC + 0x134) /* Spurious Interrupt Vector Register */ +#define AT91_AIC_DCR (AT91_AIC + 0x138) /* Debug Control Register */ +#define AT91_AIC_DCR_PROT (1 << 0) /* Protection Mode */ +#define AT91_AIC_DCR_GMSK (1 << 1) /* General Mask */ + +#define AT91_AIC_FFER (AT91_AIC + 0x140) /* Fast Forcing Enable Register [SAM9 only] */ +#define AT91_AIC_FFDR (AT91_AIC + 0x144) /* Fast Forcing Disable Register [SAM9 only] */ +#define AT91_AIC_FFSR (AT91_AIC + 0x148) /* Fast Forcing Status Register [SAM9 only] */ + +#endif diff --git a/arch/arm/mach-at91/include/mach/at91_dbgu.h b/arch/arm/mach-at91/include/mach/at91_dbgu.h new file mode 100644 index 00000000000..6dcaa771687 --- /dev/null +++ b/arch/arm/mach-at91/include/mach/at91_dbgu.h @@ -0,0 +1,66 @@ +/* + * arch/arm/mach-at91/include/mach/at91_dbgu.h + * + * Copyright (C) 2005 Ivan Kokshaysky + * Copyright (C) SAN People + * + * Debug Unit (DBGU) - System peripherals registers. + * Based on AT91RM9200 datasheet revision E. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91_DBGU_H +#define AT91_DBGU_H + +#ifdef AT91_DBGU +#define AT91_DBGU_CR (AT91_DBGU + 0x00) /* Control Register */ +#define AT91_DBGU_MR (AT91_DBGU + 0x04) /* Mode Register */ +#define AT91_DBGU_IER (AT91_DBGU + 0x08) /* Interrupt Enable Register */ +#define AT91_DBGU_TXRDY (1 << 1) /* Transmitter Ready */ +#define AT91_DBGU_TXEMPTY (1 << 9) /* Transmitter Empty */ +#define AT91_DBGU_IDR (AT91_DBGU + 0x0c) /* Interrupt Disable Register */ +#define AT91_DBGU_IMR (AT91_DBGU + 0x10) /* Interrupt Mask Register */ +#define AT91_DBGU_SR (AT91_DBGU + 0x14) /* Status Register */ +#define AT91_DBGU_RHR (AT91_DBGU + 0x18) /* Receiver Holding Register */ +#define AT91_DBGU_THR (AT91_DBGU + 0x1c) /* Transmitter Holding Register */ +#define AT91_DBGU_BRGR (AT91_DBGU + 0x20) /* Baud Rate Generator Register */ + +#define AT91_DBGU_CIDR (AT91_DBGU + 0x40) /* Chip ID Register */ +#define AT91_DBGU_EXID (AT91_DBGU + 0x44) /* Chip ID Extension Register */ +#define AT91_DBGU_FNR (AT91_DBGU + 0x48) /* Force NTRST Register [SAM9 only] */ +#define AT91_DBGU_FNTRST (1 << 0) /* Force NTRST */ + +#endif /* AT91_DBGU */ + +/* + * Some AT91 parts that don't have full DEBUG units still support the ID + * and extensions register. + */ +#define AT91_CIDR_VERSION (0x1f << 0) /* Version of the Device */ +#define AT91_CIDR_EPROC (7 << 5) /* Embedded Processor */ +#define AT91_CIDR_NVPSIZ (0xf << 8) /* Nonvolatile Program Memory Size */ +#define AT91_CIDR_NVPSIZ2 (0xf << 12) /* Second Nonvolatile Program Memory Size */ +#define AT91_CIDR_SRAMSIZ (0xf << 16) /* Internal SRAM Size */ +#define AT91_CIDR_SRAMSIZ_1K (1 << 16) +#define AT91_CIDR_SRAMSIZ_2K (2 << 16) +#define AT91_CIDR_SRAMSIZ_112K (4 << 16) +#define AT91_CIDR_SRAMSIZ_4K (5 << 16) +#define AT91_CIDR_SRAMSIZ_80K (6 << 16) +#define AT91_CIDR_SRAMSIZ_160K (7 << 16) +#define AT91_CIDR_SRAMSIZ_8K (8 << 16) +#define AT91_CIDR_SRAMSIZ_16K (9 << 16) +#define AT91_CIDR_SRAMSIZ_32K (10 << 16) +#define AT91_CIDR_SRAMSIZ_64K (11 << 16) +#define AT91_CIDR_SRAMSIZ_128K (12 << 16) +#define AT91_CIDR_SRAMSIZ_256K (13 << 16) +#define AT91_CIDR_SRAMSIZ_96K (14 << 16) +#define AT91_CIDR_SRAMSIZ_512K (15 << 16) +#define AT91_CIDR_ARCH (0xff << 20) /* Architecture Identifier */ +#define AT91_CIDR_NVPTYP (7 << 28) /* Nonvolatile Program Memory Type */ +#define AT91_CIDR_EXT (1 << 31) /* Extension Flag */ + +#endif diff --git a/arch/arm/mach-at91/include/mach/at91_mci.h b/arch/arm/mach-at91/include/mach/at91_mci.h new file mode 100644 index 00000000000..550d503a1bc --- /dev/null +++ b/arch/arm/mach-at91/include/mach/at91_mci.h @@ -0,0 +1,113 @@ +/* + * arch/arm/mach-at91/include/mach/at91_mci.h + * + * Copyright (C) 2005 Ivan Kokshaysky + * Copyright (C) SAN People + * + * MultiMedia Card Interface (MCI) registers. + * Based on AT91RM9200 datasheet revision F. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91_MCI_H +#define AT91_MCI_H + +#define AT91_MCI_CR 0x00 /* Control Register */ +#define AT91_MCI_MCIEN (1 << 0) /* Multi-Media Interface Enable */ +#define AT91_MCI_MCIDIS (1 << 1) /* Multi-Media Interface Disable */ +#define AT91_MCI_PWSEN (1 << 2) /* Power Save Mode Enable */ +#define AT91_MCI_PWSDIS (1 << 3) /* Power Save Mode Disable */ +#define AT91_MCI_SWRST (1 << 7) /* Software Reset */ + +#define AT91_MCI_MR 0x04 /* Mode Register */ +#define AT91_MCI_CLKDIV (0xff << 0) /* Clock Divider */ +#define AT91_MCI_PWSDIV (7 << 8) /* Power Saving Divider */ +#define AT91_MCI_RDPROOF (1 << 11) /* Read Proof Enable [SAM926[03] only] */ +#define AT91_MCI_WRPROOF (1 << 12) /* Write Proof Enable [SAM926[03] only] */ +#define AT91_MCI_PDCFBYTE (1 << 13) /* PDC Force Byte Transfer [SAM926[03] only] */ +#define AT91_MCI_PDCPADV (1 << 14) /* PDC Padding Value */ +#define AT91_MCI_PDCMODE (1 << 15) /* PDC-orientated Mode */ +#define AT91_MCI_BLKLEN (0xfff << 18) /* Data Block Length */ + +#define AT91_MCI_DTOR 0x08 /* Data Timeout Register */ +#define AT91_MCI_DTOCYC (0xf << 0) /* Data Timeout Cycle Number */ +#define AT91_MCI_DTOMUL (7 << 4) /* Data Timeout Multiplier */ +#define AT91_MCI_DTOMUL_1 (0 << 4) +#define AT91_MCI_DTOMUL_16 (1 << 4) +#define AT91_MCI_DTOMUL_128 (2 << 4) +#define AT91_MCI_DTOMUL_256 (3 << 4) +#define AT91_MCI_DTOMUL_1K (4 << 4) +#define AT91_MCI_DTOMUL_4K (5 << 4) +#define AT91_MCI_DTOMUL_64K (6 << 4) +#define AT91_MCI_DTOMUL_1M (7 << 4) + +#define AT91_MCI_SDCR 0x0c /* SD Card Register */ +#define AT91_MCI_SDCSEL (3 << 0) /* SD Card Selector */ +#define AT91_MCI_SDCBUS (1 << 7) /* 1-bit or 4-bit bus */ + +#define AT91_MCI_ARGR 0x10 /* Argument Register */ + +#define AT91_MCI_CMDR 0x14 /* Command Register */ +#define AT91_MCI_CMDNB (0x3f << 0) /* Command Number */ +#define AT91_MCI_RSPTYP (3 << 6) /* Response Type */ +#define AT91_MCI_RSPTYP_NONE (0 << 6) +#define AT91_MCI_RSPTYP_48 (1 << 6) +#define AT91_MCI_RSPTYP_136 (2 << 6) +#define AT91_MCI_SPCMD (7 << 8) /* Special Command */ +#define AT91_MCI_SPCMD_NONE (0 << 8) +#define AT91_MCI_SPCMD_INIT (1 << 8) +#define AT91_MCI_SPCMD_SYNC (2 << 8) +#define AT91_MCI_SPCMD_ICMD (4 << 8) +#define AT91_MCI_SPCMD_IRESP (5 << 8) +#define AT91_MCI_OPDCMD (1 << 11) /* Open Drain Command */ +#define AT91_MCI_MAXLAT (1 << 12) /* Max Latency for Command to Response */ +#define AT91_MCI_TRCMD (3 << 16) /* Transfer Command */ +#define AT91_MCI_TRCMD_NONE (0 << 16) +#define AT91_MCI_TRCMD_START (1 << 16) +#define AT91_MCI_TRCMD_STOP (2 << 16) +#define AT91_MCI_TRDIR (1 << 18) /* Transfer Direction */ +#define AT91_MCI_TRTYP (3 << 19) /* Transfer Type */ +#define AT91_MCI_TRTYP_BLOCK (0 << 19) +#define AT91_MCI_TRTYP_MULTIPLE (1 << 19) +#define AT91_MCI_TRTYP_STREAM (2 << 19) + +#define AT91_MCI_BLKR 0x18 /* Block Register */ +#define AT91_MCI_BLKR_BCNT(n) ((0xffff & (n)) << 0) /* Block count */ +#define AT91_MCI_BLKR_BLKLEN(n) ((0xffff & (n)) << 16) /* Block lenght */ + +#define AT91_MCI_RSPR(n) (0x20 + ((n) * 4)) /* Response Registers 0-3 */ +#define AT91_MCR_RDR 0x30 /* Receive Data Register */ +#define AT91_MCR_TDR 0x34 /* Transmit Data Register */ + +#define AT91_MCI_SR 0x40 /* Status Register */ +#define AT91_MCI_CMDRDY (1 << 0) /* Command Ready */ +#define AT91_MCI_RXRDY (1 << 1) /* Receiver Ready */ +#define AT91_MCI_TXRDY (1 << 2) /* Transmit Ready */ +#define AT91_MCI_BLKE (1 << 3) /* Data Block Ended */ +#define AT91_MCI_DTIP (1 << 4) /* Data Transfer in Progress */ +#define AT91_MCI_NOTBUSY (1 << 5) /* Data Not Busy */ +#define AT91_MCI_ENDRX (1 << 6) /* End of RX Buffer */ +#define AT91_MCI_ENDTX (1 << 7) /* End fo TX Buffer */ +#define AT91_MCI_SDIOIRQA (1 << 8) /* SDIO Interrupt for Slot A */ +#define AT91_MCI_SDIOIRQB (1 << 9) /* SDIO Interrupt for Slot B */ +#define AT91_MCI_RXBUFF (1 << 14) /* RX Buffer Full */ +#define AT91_MCI_TXBUFE (1 << 15) /* TX Buffer Empty */ +#define AT91_MCI_RINDE (1 << 16) /* Response Index Error */ +#define AT91_MCI_RDIRE (1 << 17) /* Response Direction Error */ +#define AT91_MCI_RCRCE (1 << 18) /* Response CRC Error */ +#define AT91_MCI_RENDE (1 << 19) /* Response End Bit Error */ +#define AT91_MCI_RTOE (1 << 20) /* Reponse Time-out Error */ +#define AT91_MCI_DCRCE (1 << 21) /* Data CRC Error */ +#define AT91_MCI_DTOE (1 << 22) /* Data Time-out Error */ +#define AT91_MCI_OVRE (1 << 30) /* Overrun */ +#define AT91_MCI_UNRE (1 << 31) /* Underrun */ + +#define AT91_MCI_IER 0x44 /* Interrupt Enable Register */ +#define AT91_MCI_IDR 0x48 /* Interrupt Disable Register */ +#define AT91_MCI_IMR 0x4c /* Interrupt Mask Register */ + +#endif diff --git a/arch/arm/mach-at91/include/mach/at91_pio.h b/arch/arm/mach-at91/include/mach/at91_pio.h new file mode 100644 index 00000000000..c6a31bf8a5c --- /dev/null +++ b/arch/arm/mach-at91/include/mach/at91_pio.h @@ -0,0 +1,49 @@ +/* + * arch/arm/mach-at91/include/mach/at91_pio.h + * + * Copyright (C) 2005 Ivan Kokshaysky + * Copyright (C) SAN People + * + * Parallel I/O Controller (PIO) - System peripherals registers. + * Based on AT91RM9200 datasheet revision E. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91_PIO_H +#define AT91_PIO_H + +#define PIO_PER 0x00 /* Enable Register */ +#define PIO_PDR 0x04 /* Disable Register */ +#define PIO_PSR 0x08 /* Status Register */ +#define PIO_OER 0x10 /* Output Enable Register */ +#define PIO_ODR 0x14 /* Output Disable Register */ +#define PIO_OSR 0x18 /* Output Status Register */ +#define PIO_IFER 0x20 /* Glitch Input Filter Enable */ +#define PIO_IFDR 0x24 /* Glitch Input Filter Disable */ +#define PIO_IFSR 0x28 /* Glitch Input Filter Status */ +#define PIO_SODR 0x30 /* Set Output Data Register */ +#define PIO_CODR 0x34 /* Clear Output Data Register */ +#define PIO_ODSR 0x38 /* Output Data Status Register */ +#define PIO_PDSR 0x3c /* Pin Data Status Register */ +#define PIO_IER 0x40 /* Interrupt Enable Register */ +#define PIO_IDR 0x44 /* Interrupt Disable Register */ +#define PIO_IMR 0x48 /* Interrupt Mask Register */ +#define PIO_ISR 0x4c /* Interrupt Status Register */ +#define PIO_MDER 0x50 /* Multi-driver Enable Register */ +#define PIO_MDDR 0x54 /* Multi-driver Disable Register */ +#define PIO_MDSR 0x58 /* Multi-driver Status Register */ +#define PIO_PUDR 0x60 /* Pull-up Disable Register */ +#define PIO_PUER 0x64 /* Pull-up Enable Register */ +#define PIO_PUSR 0x68 /* Pull-up Status Register */ +#define PIO_ASR 0x70 /* Peripheral A Select Register */ +#define PIO_BSR 0x74 /* Peripheral B Select Register */ +#define PIO_ABSR 0x78 /* AB Status Register */ +#define PIO_OWER 0xa0 /* Output Write Enable Register */ +#define PIO_OWDR 0xa4 /* Output Write Disable Register */ +#define PIO_OWSR 0xa8 /* Output Write Status Register */ + +#endif diff --git a/arch/arm/mach-at91/include/mach/at91_pit.h b/arch/arm/mach-at91/include/mach/at91_pit.h new file mode 100644 index 00000000000..0448ac36ead --- /dev/null +++ b/arch/arm/mach-at91/include/mach/at91_pit.h @@ -0,0 +1,29 @@ +/* + * arch/arm/mach-at91/include/mach/at91_pit.h + * + * Periodic Interval Timer (PIT) - System peripherals regsters. + * Based on AT91SAM9261 datasheet revision D. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91_PIT_H +#define AT91_PIT_H + +#define AT91_PIT_MR (AT91_PIT + 0x00) /* Mode Register */ +#define AT91_PIT_PITIEN (1 << 25) /* Timer Interrupt Enable */ +#define AT91_PIT_PITEN (1 << 24) /* Timer Enabled */ +#define AT91_PIT_PIV (0xfffff) /* Periodic Interval Value */ + +#define AT91_PIT_SR (AT91_PIT + 0x04) /* Status Register */ +#define AT91_PIT_PITS (1 << 0) /* Timer Status */ + +#define AT91_PIT_PIVR (AT91_PIT + 0x08) /* Periodic Interval Value Register */ +#define AT91_PIT_PIIR (AT91_PIT + 0x0c) /* Periodic Interval Image Register */ +#define AT91_PIT_PICNT (0xfff << 20) /* Interval Counter */ +#define AT91_PIT_CPIV (0xfffff) /* Inverval Value */ + +#endif diff --git a/arch/arm/mach-at91/include/mach/at91_pmc.h b/arch/arm/mach-at91/include/mach/at91_pmc.h new file mode 100644 index 00000000000..2e3f2894b70 --- /dev/null +++ b/arch/arm/mach-at91/include/mach/at91_pmc.h @@ -0,0 +1,111 @@ +/* + * arch/arm/mach-at91/include/mach/at91_pmc.h + * + * Copyright (C) 2005 Ivan Kokshaysky + * Copyright (C) SAN People + * + * Power Management Controller (PMC) - System peripherals registers. + * Based on AT91RM9200 datasheet revision E. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91_PMC_H +#define AT91_PMC_H + +#define AT91_PMC_SCER (AT91_PMC + 0x00) /* System Clock Enable Register */ +#define AT91_PMC_SCDR (AT91_PMC + 0x04) /* System Clock Disable Register */ + +#define AT91_PMC_SCSR (AT91_PMC + 0x08) /* System Clock Status Register */ +#define AT91_PMC_PCK (1 << 0) /* Processor Clock */ +#define AT91RM9200_PMC_UDP (1 << 1) /* USB Devcice Port Clock [AT91RM9200 only] */ +#define AT91RM9200_PMC_MCKUDP (1 << 2) /* USB Device Port Master Clock Automatic Disable on Suspend [AT91RM9200 only] */ +#define AT91RM9200_PMC_UHP (1 << 4) /* USB Host Port Clock [AT91RM9200 only] */ +#define AT91SAM926x_PMC_UHP (1 << 6) /* USB Host Port Clock [AT91SAM926x only] */ +#define AT91CAP9_PMC_UHP (1 << 6) /* USB Host Port Clock [AT91CAP9 only] */ +#define AT91SAM926x_PMC_UDP (1 << 7) /* USB Devcice Port Clock [AT91SAM926x only] */ +#define AT91_PMC_PCK0 (1 << 8) /* Programmable Clock 0 */ +#define AT91_PMC_PCK1 (1 << 9) /* Programmable Clock 1 */ +#define AT91_PMC_PCK2 (1 << 10) /* Programmable Clock 2 */ +#define AT91_PMC_PCK3 (1 << 11) /* Programmable Clock 3 */ +#define AT91_PMC_HCK0 (1 << 16) /* AHB Clock (USB host) [AT91SAM9261 only] */ +#define AT91_PMC_HCK1 (1 << 17) /* AHB Clock (LCD) [AT91SAM9261 only] */ + +#define AT91_PMC_PCER (AT91_PMC + 0x10) /* Peripheral Clock Enable Register */ +#define AT91_PMC_PCDR (AT91_PMC + 0x14) /* Peripheral Clock Disable Register */ +#define AT91_PMC_PCSR (AT91_PMC + 0x18) /* Peripheral Clock Status Register */ + +#define AT91_CKGR_UCKR (AT91_PMC + 0x1C) /* UTMI Clock Register [SAM9RL, CAP9] */ +#define AT91_PMC_UPLLEN (1 << 16) /* UTMI PLL Enable */ +#define AT91_PMC_UPLLCOUNT (0xf << 20) /* UTMI PLL Start-up Time */ +#define AT91_PMC_BIASEN (1 << 24) /* UTMI BIAS Enable */ +#define AT91_PMC_BIASCOUNT (0xf << 28) /* UTMI PLL Start-up Time */ + +#define AT91_CKGR_MOR (AT91_PMC + 0x20) /* Main Oscillator Register [not on SAM9RL] */ +#define AT91_PMC_MOSCEN (1 << 0) /* Main Oscillator Enable */ +#define AT91_PMC_OSCBYPASS (1 << 1) /* Oscillator Bypass [SAM9x, CAP9] */ +#define AT91_PMC_OSCOUNT (0xff << 8) /* Main Oscillator Start-up Time */ + +#define AT91_CKGR_MCFR (AT91_PMC + 0x24) /* Main Clock Frequency Register */ +#define AT91_PMC_MAINF (0xffff << 0) /* Main Clock Frequency */ +#define AT91_PMC_MAINRDY (1 << 16) /* Main Clock Ready */ + +#define AT91_CKGR_PLLAR (AT91_PMC + 0x28) /* PLL A Register */ +#define AT91_CKGR_PLLBR (AT91_PMC + 0x2c) /* PLL B Register */ +#define AT91_PMC_DIV (0xff << 0) /* Divider */ +#define AT91_PMC_PLLCOUNT (0x3f << 8) /* PLL Counter */ +#define AT91_PMC_OUT (3 << 14) /* PLL Clock Frequency Range */ +#define AT91_PMC_MUL (0x7ff << 16) /* PLL Multiplier */ +#define AT91_PMC_USBDIV (3 << 28) /* USB Divisor (PLLB only) */ +#define AT91_PMC_USBDIV_1 (0 << 28) +#define AT91_PMC_USBDIV_2 (1 << 28) +#define AT91_PMC_USBDIV_4 (2 << 28) +#define AT91_PMC_USB96M (1 << 28) /* Divider by 2 Enable (PLLB only) */ + +#define AT91_PMC_MCKR (AT91_PMC + 0x30) /* Master Clock Register */ +#define AT91_PMC_CSS (3 << 0) /* Master Clock Selection */ +#define AT91_PMC_CSS_SLOW (0 << 0) +#define AT91_PMC_CSS_MAIN (1 << 0) +#define AT91_PMC_CSS_PLLA (2 << 0) +#define AT91_PMC_CSS_PLLB (3 << 0) +#define AT91_PMC_PRES (7 << 2) /* Master Clock Prescaler */ +#define AT91_PMC_PRES_1 (0 << 2) +#define AT91_PMC_PRES_2 (1 << 2) +#define AT91_PMC_PRES_4 (2 << 2) +#define AT91_PMC_PRES_8 (3 << 2) +#define AT91_PMC_PRES_16 (4 << 2) +#define AT91_PMC_PRES_32 (5 << 2) +#define AT91_PMC_PRES_64 (6 << 2) +#define AT91_PMC_MDIV (3 << 8) /* Master Clock Division */ +#define AT91RM9200_PMC_MDIV_1 (0 << 8) /* [AT91RM9200 only] */ +#define AT91RM9200_PMC_MDIV_2 (1 << 8) +#define AT91RM9200_PMC_MDIV_3 (2 << 8) +#define AT91RM9200_PMC_MDIV_4 (3 << 8) +#define AT91SAM9_PMC_MDIV_1 (0 << 8) /* [SAM9,CAP9 only] */ +#define AT91SAM9_PMC_MDIV_2 (1 << 8) +#define AT91SAM9_PMC_MDIV_4 (2 << 8) +#define AT91SAM9_PMC_MDIV_6 (3 << 8) +#define AT91_PMC_PDIV (1 << 12) /* Processor Clock Division [some SAM9 only] */ +#define AT91_PMC_PDIV_1 (0 << 12) +#define AT91_PMC_PDIV_2 (1 << 12) + +#define AT91_PMC_PCKR(n) (AT91_PMC + 0x40 + ((n) * 4)) /* Programmable Clock 0-3 Registers */ + +#define AT91_PMC_IER (AT91_PMC + 0x60) /* Interrupt Enable Register */ +#define AT91_PMC_IDR (AT91_PMC + 0x64) /* Interrupt Disable Register */ +#define AT91_PMC_SR (AT91_PMC + 0x68) /* Status Register */ +#define AT91_PMC_MOSCS (1 << 0) /* MOSCS Flag */ +#define AT91_PMC_LOCKA (1 << 1) /* PLLA Lock */ +#define AT91_PMC_LOCKB (1 << 2) /* PLLB Lock */ +#define AT91_PMC_MCKRDY (1 << 3) /* Master Clock */ +#define AT91_PMC_LOCKU (1 << 6) /* UPLL Lock [AT91CAP9 only] */ +#define AT91_PMC_PCK0RDY (1 << 8) /* Programmable Clock 0 */ +#define AT91_PMC_PCK1RDY (1 << 9) /* Programmable Clock 1 */ +#define AT91_PMC_PCK2RDY (1 << 10) /* Programmable Clock 2 */ +#define AT91_PMC_PCK3RDY (1 << 11) /* Programmable Clock 3 */ +#define AT91_PMC_IMR (AT91_PMC + 0x6c) /* Interrupt Mask Register */ + +#endif diff --git a/arch/arm/mach-at91/include/mach/at91_rstc.h b/arch/arm/mach-at91/include/mach/at91_rstc.h new file mode 100644 index 00000000000..7cd1b39aaa4 --- /dev/null +++ b/arch/arm/mach-at91/include/mach/at91_rstc.h @@ -0,0 +1,38 @@ +/* + * arch/arm/mach-at91/include/mach/at91_rstc.h + * + * Reset Controller (RSTC) - System peripherals regsters. + * Based on AT91SAM9261 datasheet revision D. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91_RSTC_H +#define AT91_RSTC_H + +#define AT91_RSTC_CR (AT91_RSTC + 0x00) /* Reset Controller Control Register */ +#define AT91_RSTC_PROCRST (1 << 0) /* Processor Reset */ +#define AT91_RSTC_PERRST (1 << 2) /* Peripheral Reset */ +#define AT91_RSTC_EXTRST (1 << 3) /* External Reset */ +#define AT91_RSTC_KEY (0xa5 << 24) /* KEY Password */ + +#define AT91_RSTC_SR (AT91_RSTC + 0x04) /* Reset Controller Status Register */ +#define AT91_RSTC_URSTS (1 << 0) /* User Reset Status */ +#define AT91_RSTC_RSTTYP (7 << 8) /* Reset Type */ +#define AT91_RSTC_RSTTYP_GENERAL (0 << 8) +#define AT91_RSTC_RSTTYP_WAKEUP (1 << 8) +#define AT91_RSTC_RSTTYP_WATCHDOG (2 << 8) +#define AT91_RSTC_RSTTYP_SOFTWARE (3 << 8) +#define AT91_RSTC_RSTTYP_USER (4 << 8) +#define AT91_RSTC_NRSTL (1 << 16) /* NRST Pin Level */ +#define AT91_RSTC_SRCMP (1 << 17) /* Software Reset Command in Progress */ + +#define AT91_RSTC_MR (AT91_RSTC + 0x08) /* Reset Controller Mode Register */ +#define AT91_RSTC_URSTEN (1 << 0) /* User Reset Enable */ +#define AT91_RSTC_URSTIEN (1 << 4) /* User Reset Interrupt Enable */ +#define AT91_RSTC_ERSTL (0xf << 8) /* External Reset Length */ + +#endif diff --git a/arch/arm/mach-at91/include/mach/at91_rtc.h b/arch/arm/mach-at91/include/mach/at91_rtc.h new file mode 100644 index 00000000000..e56f4701a3e --- /dev/null +++ b/arch/arm/mach-at91/include/mach/at91_rtc.h @@ -0,0 +1,75 @@ +/* + * arch/arm/mach-at91/include/mach/at91_rtc.h + * + * Copyright (C) 2005 Ivan Kokshaysky + * Copyright (C) SAN People + * + * Real Time Clock (RTC) - System peripheral registers. + * Based on AT91RM9200 datasheet revision E. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91_RTC_H +#define AT91_RTC_H + +#define AT91_RTC_CR (AT91_RTC + 0x00) /* Control Register */ +#define AT91_RTC_UPDTIM (1 << 0) /* Update Request Time Register */ +#define AT91_RTC_UPDCAL (1 << 1) /* Update Request Calendar Register */ +#define AT91_RTC_TIMEVSEL (3 << 8) /* Time Event Selection */ +#define AT91_RTC_TIMEVSEL_MINUTE (0 << 8) +#define AT91_RTC_TIMEVSEL_HOUR (1 << 8) +#define AT91_RTC_TIMEVSEL_DAY24 (2 << 8) +#define AT91_RTC_TIMEVSEL_DAY12 (3 << 8) +#define AT91_RTC_CALEVSEL (3 << 16) /* Calendar Event Selection */ +#define AT91_RTC_CALEVSEL_WEEK (0 << 16) +#define AT91_RTC_CALEVSEL_MONTH (1 << 16) +#define AT91_RTC_CALEVSEL_YEAR (2 << 16) + +#define AT91_RTC_MR (AT91_RTC + 0x04) /* Mode Register */ +#define AT91_RTC_HRMOD (1 << 0) /* 12/24 Hour Mode */ + +#define AT91_RTC_TIMR (AT91_RTC + 0x08) /* Time Register */ +#define AT91_RTC_SEC (0x7f << 0) /* Current Second */ +#define AT91_RTC_MIN (0x7f << 8) /* Current Minute */ +#define AT91_RTC_HOUR (0x3f << 16) /* Current Hour */ +#define AT91_RTC_AMPM (1 << 22) /* Ante Meridiem Post Meridiem Indicator */ + +#define AT91_RTC_CALR (AT91_RTC + 0x0c) /* Calendar Register */ +#define AT91_RTC_CENT (0x7f << 0) /* Current Century */ +#define AT91_RTC_YEAR (0xff << 8) /* Current Year */ +#define AT91_RTC_MONTH (0x1f << 16) /* Current Month */ +#define AT91_RTC_DAY (7 << 21) /* Current Day */ +#define AT91_RTC_DATE (0x3f << 24) /* Current Date */ + +#define AT91_RTC_TIMALR (AT91_RTC + 0x10) /* Time Alarm Register */ +#define AT91_RTC_SECEN (1 << 7) /* Second Alarm Enable */ +#define AT91_RTC_MINEN (1 << 15) /* Minute Alarm Enable */ +#define AT91_RTC_HOUREN (1 << 23) /* Hour Alarm Enable */ + +#define AT91_RTC_CALALR (AT91_RTC + 0x14) /* Calendar Alarm Register */ +#define AT91_RTC_MTHEN (1 << 23) /* Month Alarm Enable */ +#define AT91_RTC_DATEEN (1 << 31) /* Date Alarm Enable */ + +#define AT91_RTC_SR (AT91_RTC + 0x18) /* Status Register */ +#define AT91_RTC_ACKUPD (1 << 0) /* Acknowledge for Update */ +#define AT91_RTC_ALARM (1 << 1) /* Alarm Flag */ +#define AT91_RTC_SECEV (1 << 2) /* Second Event */ +#define AT91_RTC_TIMEV (1 << 3) /* Time Event */ +#define AT91_RTC_CALEV (1 << 4) /* Calendar Event */ + +#define AT91_RTC_SCCR (AT91_RTC + 0x1c) /* Status Clear Command Register */ +#define AT91_RTC_IER (AT91_RTC + 0x20) /* Interrupt Enable Register */ +#define AT91_RTC_IDR (AT91_RTC + 0x24) /* Interrupt Disable Register */ +#define AT91_RTC_IMR (AT91_RTC + 0x28) /* Interrupt Mask Register */ + +#define AT91_RTC_VER (AT91_RTC + 0x2c) /* Valid Entry Register */ +#define AT91_RTC_NVTIM (1 << 0) /* Non valid Time */ +#define AT91_RTC_NVCAL (1 << 1) /* Non valid Calendar */ +#define AT91_RTC_NVTIMALR (1 << 2) /* Non valid Time Alarm */ +#define AT91_RTC_NVCALALR (1 << 3) /* Non valid Calendar Alarm */ + +#endif diff --git a/arch/arm/mach-at91/include/mach/at91_rtt.h b/arch/arm/mach-at91/include/mach/at91_rtt.h new file mode 100644 index 00000000000..71782e5d215 --- /dev/null +++ b/arch/arm/mach-at91/include/mach/at91_rtt.h @@ -0,0 +1,32 @@ +/* + * arch/arm/mach-at91/include/mach/at91_rtt.h + * + * Real-time Timer (RTT) - System peripherals regsters. + * Based on AT91SAM9261 datasheet revision D. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91_RTT_H +#define AT91_RTT_H + +#define AT91_RTT_MR 0x00 /* Real-time Mode Register */ +#define AT91_RTT_RTPRES (0xffff << 0) /* Real-time Timer Prescaler Value */ +#define AT91_RTT_ALMIEN (1 << 16) /* Alarm Interrupt Enable */ +#define AT91_RTT_RTTINCIEN (1 << 17) /* Real Time Timer Increment Interrupt Enable */ +#define AT91_RTT_RTTRST (1 << 18) /* Real Time Timer Restart */ + +#define AT91_RTT_AR 0x04 /* Real-time Alarm Register */ +#define AT91_RTT_ALMV (0xffffffff) /* Alarm Value */ + +#define AT91_RTT_VR 0x08 /* Real-time Value Register */ +#define AT91_RTT_CRTV (0xffffffff) /* Current Real-time Value */ + +#define AT91_RTT_SR 0x0c /* Real-time Status Register */ +#define AT91_RTT_ALMS (1 << 0) /* Real-time Alarm Status */ +#define AT91_RTT_RTTINC (1 << 1) /* Real-time Timer Increment */ + +#endif diff --git a/arch/arm/mach-at91/include/mach/at91_shdwc.h b/arch/arm/mach-at91/include/mach/at91_shdwc.h new file mode 100644 index 00000000000..60be5ae624f --- /dev/null +++ b/arch/arm/mach-at91/include/mach/at91_shdwc.h @@ -0,0 +1,35 @@ +/* + * arch/arm/mach-at91/include/mach/at91_shdwc.h + * + * Shutdown Controller (SHDWC) - System peripherals regsters. + * Based on AT91SAM9261 datasheet revision D. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91_SHDWC_H +#define AT91_SHDWC_H + +#define AT91_SHDW_CR (AT91_SHDWC + 0x00) /* Shut Down Control Register */ +#define AT91_SHDW_SHDW (1 << 0) /* Shut Down command */ +#define AT91_SHDW_KEY (0xa5 << 24) /* KEY Password */ + +#define AT91_SHDW_MR (AT91_SHDWC + 0x04) /* Shut Down Mode Register */ +#define AT91_SHDW_WKMODE0 (3 << 0) /* Wake-up 0 Mode Selection */ +#define AT91_SHDW_WKMODE0_NONE 0 +#define AT91_SHDW_WKMODE0_HIGH 1 +#define AT91_SHDW_WKMODE0_LOW 2 +#define AT91_SHDW_WKMODE0_ANYLEVEL 3 +#define AT91_SHDW_CPTWK0 (0xf << 4) /* Counter On Wake Up 0 */ +#define AT91_SHDW_CPTWK0_(x) ((x) << 4) +#define AT91_SHDW_RTTWKEN (1 << 16) /* Real Time Timer Wake-up Enable */ + +#define AT91_SHDW_SR (AT91_SHDWC + 0x08) /* Shut Down Status Register */ +#define AT91_SHDW_WAKEUP0 (1 << 0) /* Wake-up 0 Status */ +#define AT91_SHDW_RTTWK (1 << 16) /* Real-time Timer Wake-up */ +#define AT91_SHDW_RTCWK (1 << 17) /* Real-time Clock Wake-up [SAM9RL] */ + +#endif diff --git a/arch/arm/mach-at91/include/mach/at91_spi.h b/arch/arm/mach-at91/include/mach/at91_spi.h new file mode 100644 index 00000000000..2f6ba0c5636 --- /dev/null +++ b/arch/arm/mach-at91/include/mach/at91_spi.h @@ -0,0 +1,81 @@ +/* + * arch/arm/mach-at91/include/mach/at91_spi.h + * + * Copyright (C) 2005 Ivan Kokshaysky + * Copyright (C) SAN People + * + * Serial Peripheral Interface (SPI) registers. + * Based on AT91RM9200 datasheet revision E. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91_SPI_H +#define AT91_SPI_H + +#define AT91_SPI_CR 0x00 /* Control Register */ +#define AT91_SPI_SPIEN (1 << 0) /* SPI Enable */ +#define AT91_SPI_SPIDIS (1 << 1) /* SPI Disable */ +#define AT91_SPI_SWRST (1 << 7) /* SPI Software Reset */ +#define AT91_SPI_LASTXFER (1 << 24) /* Last Transfer [SAM9261 only] */ + +#define AT91_SPI_MR 0x04 /* Mode Register */ +#define AT91_SPI_MSTR (1 << 0) /* Master/Slave Mode */ +#define AT91_SPI_PS (1 << 1) /* Peripheral Select */ +#define AT91_SPI_PS_FIXED (0 << 1) +#define AT91_SPI_PS_VARIABLE (1 << 1) +#define AT91_SPI_PCSDEC (1 << 2) /* Chip Select Decode */ +#define AT91_SPI_DIV32 (1 << 3) /* Clock Selection [AT91RM9200 only] */ +#define AT91_SPI_MODFDIS (1 << 4) /* Mode Fault Detection */ +#define AT91_SPI_LLB (1 << 7) /* Local Loopback Enable */ +#define AT91_SPI_PCS (0xf << 16) /* Peripheral Chip Select */ +#define AT91_SPI_DLYBCS (0xff << 24) /* Delay Between Chip Selects */ + +#define AT91_SPI_RDR 0x08 /* Receive Data Register */ +#define AT91_SPI_RD (0xffff << 0) /* Receive Data */ +#define AT91_SPI_PCS (0xf << 16) /* Peripheral Chip Select */ + +#define AT91_SPI_TDR 0x0c /* Transmit Data Register */ +#define AT91_SPI_TD (0xffff << 0) /* Transmit Data */ +#define AT91_SPI_PCS (0xf << 16) /* Peripheral Chip Select */ +#define AT91_SPI_LASTXFER (1 << 24) /* Last Transfer [SAM9261 only] */ + +#define AT91_SPI_SR 0x10 /* Status Register */ +#define AT91_SPI_RDRF (1 << 0) /* Receive Data Register Full */ +#define AT91_SPI_TDRE (1 << 1) /* Transmit Data Register Full */ +#define AT91_SPI_MODF (1 << 2) /* Mode Fault Error */ +#define AT91_SPI_OVRES (1 << 3) /* Overrun Error Status */ +#define AT91_SPI_ENDRX (1 << 4) /* End of RX buffer */ +#define AT91_SPI_ENDTX (1 << 5) /* End of TX buffer */ +#define AT91_SPI_RXBUFF (1 << 6) /* RX Buffer Full */ +#define AT91_SPI_TXBUFE (1 << 7) /* TX Buffer Empty */ +#define AT91_SPI_NSSR (1 << 8) /* NSS Rising [SAM9261 only] */ +#define AT91_SPI_TXEMPTY (1 << 9) /* Transmission Register Empty [SAM9261 only] */ +#define AT91_SPI_SPIENS (1 << 16) /* SPI Enable Status */ + +#define AT91_SPI_IER 0x14 /* Interrupt Enable Register */ +#define AT91_SPI_IDR 0x18 /* Interrupt Disable Register */ +#define AT91_SPI_IMR 0x1c /* Interrupt Mask Register */ + +#define AT91_SPI_CSR(n) (0x30 + ((n) * 4)) /* Chip Select Registers 0-3 */ +#define AT91_SPI_CPOL (1 << 0) /* Clock Polarity */ +#define AT91_SPI_NCPHA (1 << 1) /* Clock Phase */ +#define AT91_SPI_CSAAT (1 << 3) /* Chip Select Active After Transfer [SAM9261 only] */ +#define AT91_SPI_BITS (0xf << 4) /* Bits Per Transfer */ +#define AT91_SPI_BITS_8 (0 << 4) +#define AT91_SPI_BITS_9 (1 << 4) +#define AT91_SPI_BITS_10 (2 << 4) +#define AT91_SPI_BITS_11 (3 << 4) +#define AT91_SPI_BITS_12 (4 << 4) +#define AT91_SPI_BITS_13 (5 << 4) +#define AT91_SPI_BITS_14 (6 << 4) +#define AT91_SPI_BITS_15 (7 << 4) +#define AT91_SPI_BITS_16 (8 << 4) +#define AT91_SPI_SCBR (0xff << 8) /* Serial Clock Baud Rate */ +#define AT91_SPI_DLYBS (0xff << 16) /* Delay before SPCK */ +#define AT91_SPI_DLYBCT (0xff << 24) /* Delay between Consecutive Transfers */ + +#endif diff --git a/arch/arm/mach-at91/include/mach/at91_ssc.h b/arch/arm/mach-at91/include/mach/at91_ssc.h new file mode 100644 index 00000000000..a81114c11c7 --- /dev/null +++ b/arch/arm/mach-at91/include/mach/at91_ssc.h @@ -0,0 +1,106 @@ +/* + * arch/arm/mach-at91/include/mach/at91_ssc.h + * + * Copyright (C) SAN People + * + * Serial Synchronous Controller (SSC) registers. + * Based on AT91RM9200 datasheet revision E. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91_SSC_H +#define AT91_SSC_H + +#define AT91_SSC_CR 0x00 /* Control Register */ +#define AT91_SSC_RXEN (1 << 0) /* Receive Enable */ +#define AT91_SSC_RXDIS (1 << 1) /* Receive Disable */ +#define AT91_SSC_TXEN (1 << 8) /* Transmit Enable */ +#define AT91_SSC_TXDIS (1 << 9) /* Transmit Disable */ +#define AT91_SSC_SWRST (1 << 15) /* Software Reset */ + +#define AT91_SSC_CMR 0x04 /* Clock Mode Register */ +#define AT91_SSC_CMR_DIV (0xfff << 0) /* Clock Divider */ + +#define AT91_SSC_RCMR 0x10 /* Receive Clock Mode Register */ +#define AT91_SSC_CKS (3 << 0) /* Clock Selection */ +#define AT91_SSC_CKS_DIV (0 << 0) +#define AT91_SSC_CKS_CLOCK (1 << 0) +#define AT91_SSC_CKS_PIN (2 << 0) +#define AT91_SSC_CKO (7 << 2) /* Clock Output Mode Selection */ +#define AT91_SSC_CKO_NONE (0 << 2) +#define AT91_SSC_CKO_CONTINUOUS (1 << 2) +#define AT91_SSC_CKI (1 << 5) /* Clock Inversion */ +#define AT91_SSC_CKI_FALLING (0 << 5) +#define AT91_SSC_CK_RISING (1 << 5) +#define AT91_SSC_CKG (1 << 6) /* Receive Clock Gating Selection [AT91SAM9261 only] */ +#define AT91_SSC_CKG_NONE (0 << 6) +#define AT91_SSC_CKG_RFLOW (1 << 6) +#define AT91_SSC_CKG_RFHIGH (2 << 6) +#define AT91_SSC_START (0xf << 8) /* Start Selection */ +#define AT91_SSC_START_CONTINUOUS (0 << 8) +#define AT91_SSC_START_TX_RX (1 << 8) +#define AT91_SSC_START_LOW_RF (2 << 8) +#define AT91_SSC_START_HIGH_RF (3 << 8) +#define AT91_SSC_START_FALLING_RF (4 << 8) +#define AT91_SSC_START_RISING_RF (5 << 8) +#define AT91_SSC_START_LEVEL_RF (6 << 8) +#define AT91_SSC_START_EDGE_RF (7 << 8) +#define AT91_SSC_STOP (1 << 12) /* Receive Stop Selection [AT91SAM9261 only] */ +#define AT91_SSC_STTDLY (0xff << 16) /* Start Delay */ +#define AT91_SSC_PERIOD (0xff << 24) /* Period Divider Selection */ + +#define AT91_SSC_RFMR 0x14 /* Receive Frame Mode Register */ +#define AT91_SSC_DATALEN (0x1f << 0) /* Data Length */ +#define AT91_SSC_LOOP (1 << 5) /* Loop Mode */ +#define AT91_SSC_MSBF (1 << 7) /* Most Significant Bit First */ +#define AT91_SSC_DATNB (0xf << 8) /* Data Number per Frame */ +#define AT91_SSC_FSLEN (0xf << 16) /* Frame Sync Length */ +#define AT91_SSC_FSOS (7 << 20) /* Frame Sync Output Selection */ +#define AT91_SSC_FSOS_NONE (0 << 20) +#define AT91_SSC_FSOS_NEGATIVE (1 << 20) +#define AT91_SSC_FSOS_POSITIVE (2 << 20) +#define AT91_SSC_FSOS_LOW (3 << 20) +#define AT91_SSC_FSOS_HIGH (4 << 20) +#define AT91_SSC_FSOS_TOGGLE (5 << 20) +#define AT91_SSC_FSEDGE (1 << 24) /* Frame Sync Edge Detection */ +#define AT91_SSC_FSEDGE_POSITIVE (0 << 24) +#define AT91_SSC_FSEDGE_NEGATIVE (1 << 24) + +#define AT91_SSC_TCMR 0x18 /* Transmit Clock Mode Register */ +#define AT91_SSC_TFMR 0x1c /* Transmit Fram Mode Register */ +#define AT91_SSC_DATDEF (1 << 5) /* Data Default Value */ +#define AT91_SSC_FSDEN (1 << 23) /* Frame Sync Data Enable */ + +#define AT91_SSC_RHR 0x20 /* Receive Holding Register */ +#define AT91_SSC_THR 0x24 /* Transmit Holding Register */ +#define AT91_SSC_RSHR 0x30 /* Receive Sync Holding Register */ +#define AT91_SSC_TSHR 0x34 /* Transmit Sync Holding Register */ + +#define AT91_SSC_RC0R 0x38 /* Receive Compare 0 Register [AT91SAM9261 only] */ +#define AT91_SSC_RC1R 0x3c /* Receive Compare 1 Register [AT91SAM9261 only] */ + +#define AT91_SSC_SR 0x40 /* Status Register */ +#define AT91_SSC_TXRDY (1 << 0) /* Transmit Ready */ +#define AT91_SSC_TXEMPTY (1 << 1) /* Transmit Empty */ +#define AT91_SSC_ENDTX (1 << 2) /* End of Transmission */ +#define AT91_SSC_TXBUFE (1 << 3) /* Transmit Buffer Empty */ +#define AT91_SSC_RXRDY (1 << 4) /* Receive Ready */ +#define AT91_SSC_OVRUN (1 << 5) /* Receive Overrun */ +#define AT91_SSC_ENDRX (1 << 6) /* End of Reception */ +#define AT91_SSC_RXBUFF (1 << 7) /* Receive Buffer Full */ +#define AT91_SSC_CP0 (1 << 8) /* Compare 0 [AT91SAM9261 only] */ +#define AT91_SSC_CP1 (1 << 9) /* Compare 1 [AT91SAM9261 only] */ +#define AT91_SSC_TXSYN (1 << 10) /* Transmit Sync */ +#define AT91_SSC_RXSYN (1 << 11) /* Receive Sync */ +#define AT91_SSC_TXENA (1 << 16) /* Transmit Enable */ +#define AT91_SSC_RXENA (1 << 17) /* Receive Enable */ + +#define AT91_SSC_IER 0x44 /* Interrupt Enable Register */ +#define AT91_SSC_IDR 0x48 /* Interrupt Disable Register */ +#define AT91_SSC_IMR 0x4c /* Interrupt Mask Register */ + +#endif diff --git a/arch/arm/mach-at91/include/mach/at91_st.h b/arch/arm/mach-at91/include/mach/at91_st.h new file mode 100644 index 00000000000..8847173e410 --- /dev/null +++ b/arch/arm/mach-at91/include/mach/at91_st.h @@ -0,0 +1,49 @@ +/* + * arch/arm/mach-at91/include/mach/at91_st.h + * + * Copyright (C) 2005 Ivan Kokshaysky + * Copyright (C) SAN People + * + * System Timer (ST) - System peripherals registers. + * Based on AT91RM9200 datasheet revision E. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91_ST_H +#define AT91_ST_H + +#define AT91_ST_CR (AT91_ST + 0x00) /* Control Register */ +#define AT91_ST_WDRST (1 << 0) /* Watchdog Timer Restart */ + +#define AT91_ST_PIMR (AT91_ST + 0x04) /* Period Interval Mode Register */ +#define AT91_ST_PIV (0xffff << 0) /* Period Interval Value */ + +#define AT91_ST_WDMR (AT91_ST + 0x08) /* Watchdog Mode Register */ +#define AT91_ST_WDV (0xffff << 0) /* Watchdog Counter Value */ +#define AT91_ST_RSTEN (1 << 16) /* Reset Enable */ +#define AT91_ST_EXTEN (1 << 17) /* External Signal Assertion Enable */ + +#define AT91_ST_RTMR (AT91_ST + 0x0c) /* Real-time Mode Register */ +#define AT91_ST_RTPRES (0xffff << 0) /* Real-time Prescalar Value */ + +#define AT91_ST_SR (AT91_ST + 0x10) /* Status Register */ +#define AT91_ST_PITS (1 << 0) /* Period Interval Timer Status */ +#define AT91_ST_WDOVF (1 << 1) /* Watchdog Overflow */ +#define AT91_ST_RTTINC (1 << 2) /* Real-time Timer Increment */ +#define AT91_ST_ALMS (1 << 3) /* Alarm Status */ + +#define AT91_ST_IER (AT91_ST + 0x14) /* Interrupt Enable Register */ +#define AT91_ST_IDR (AT91_ST + 0x18) /* Interrupt Disable Register */ +#define AT91_ST_IMR (AT91_ST + 0x1c) /* Interrupt Mask Register */ + +#define AT91_ST_RTAR (AT91_ST + 0x20) /* Real-time Alarm Register */ +#define AT91_ST_ALMV (0xfffff << 0) /* Alarm Value */ + +#define AT91_ST_CRTR (AT91_ST + 0x24) /* Current Real-time Register */ +#define AT91_ST_CRTV (0xfffff << 0) /* Current Real-Time Value */ + +#endif diff --git a/arch/arm/mach-at91/include/mach/at91_tc.h b/arch/arm/mach-at91/include/mach/at91_tc.h new file mode 100644 index 00000000000..46a317fd716 --- /dev/null +++ b/arch/arm/mach-at91/include/mach/at91_tc.h @@ -0,0 +1,146 @@ +/* + * arch/arm/mach-at91/include/mach/at91_tc.h + * + * Copyright (C) SAN People + * + * Timer/Counter Unit (TC) registers. + * Based on AT91RM9200 datasheet revision E. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91_TC_H +#define AT91_TC_H + +#define AT91_TC_BCR 0xc0 /* TC Block Control Register */ +#define AT91_TC_SYNC (1 << 0) /* Synchro Command */ + +#define AT91_TC_BMR 0xc4 /* TC Block Mode Register */ +#define AT91_TC_TC0XC0S (3 << 0) /* External Clock Signal 0 Selection */ +#define AT91_TC_TC0XC0S_TCLK0 (0 << 0) +#define AT91_TC_TC0XC0S_NONE (1 << 0) +#define AT91_TC_TC0XC0S_TIOA1 (2 << 0) +#define AT91_TC_TC0XC0S_TIOA2 (3 << 0) +#define AT91_TC_TC1XC1S (3 << 2) /* External Clock Signal 1 Selection */ +#define AT91_TC_TC1XC1S_TCLK1 (0 << 2) +#define AT91_TC_TC1XC1S_NONE (1 << 2) +#define AT91_TC_TC1XC1S_TIOA0 (2 << 2) +#define AT91_TC_TC1XC1S_TIOA2 (3 << 2) +#define AT91_TC_TC2XC2S (3 << 4) /* External Clock Signal 2 Selection */ +#define AT91_TC_TC2XC2S_TCLK2 (0 << 4) +#define AT91_TC_TC2XC2S_NONE (1 << 4) +#define AT91_TC_TC2XC2S_TIOA0 (2 << 4) +#define AT91_TC_TC2XC2S_TIOA1 (3 << 4) + + +#define AT91_TC_CCR 0x00 /* Channel Control Register */ +#define AT91_TC_CLKEN (1 << 0) /* Counter Clock Enable Command */ +#define AT91_TC_CLKDIS (1 << 1) /* Counter CLock Disable Command */ +#define AT91_TC_SWTRG (1 << 2) /* Software Trigger Command */ + +#define AT91_TC_CMR 0x04 /* Channel Mode Register */ +#define AT91_TC_TCCLKS (7 << 0) /* Capture/Waveform Mode: Clock Selection */ +#define AT91_TC_TIMER_CLOCK1 (0 << 0) +#define AT91_TC_TIMER_CLOCK2 (1 << 0) +#define AT91_TC_TIMER_CLOCK3 (2 << 0) +#define AT91_TC_TIMER_CLOCK4 (3 << 0) +#define AT91_TC_TIMER_CLOCK5 (4 << 0) +#define AT91_TC_XC0 (5 << 0) +#define AT91_TC_XC1 (6 << 0) +#define AT91_TC_XC2 (7 << 0) +#define AT91_TC_CLKI (1 << 3) /* Capture/Waveform Mode: Clock Invert */ +#define AT91_TC_BURST (3 << 4) /* Capture/Waveform Mode: Burst Signal Selection */ +#define AT91_TC_LDBSTOP (1 << 6) /* Capture Mode: Counter Clock Stopped with TB Loading */ +#define AT91_TC_LDBDIS (1 << 7) /* Capture Mode: Counter Clock Disable with RB Loading */ +#define AT91_TC_ETRGEDG (3 << 8) /* Capture Mode: External Trigger Edge Selection */ +#define AT91_TC_ABETRG (1 << 10) /* Capture Mode: TIOA or TIOB External Trigger Selection */ +#define AT91_TC_CPCTRG (1 << 14) /* Capture Mode: RC Compare Trigger Enable */ +#define AT91_TC_WAVE (1 << 15) /* Capture/Waveform mode */ +#define AT91_TC_LDRA (3 << 16) /* Capture Mode: RA Loading Selection */ +#define AT91_TC_LDRB (3 << 18) /* Capture Mode: RB Loading Selection */ + +#define AT91_TC_CPCSTOP (1 << 6) /* Waveform Mode: Counter Clock Stopped with RC Compare */ +#define AT91_TC_CPCDIS (1 << 7) /* Waveform Mode: Counter Clock Disable with RC Compare */ +#define AT91_TC_EEVTEDG (3 << 8) /* Waveform Mode: External Event Edge Selection */ +#define AT91_TC_EEVTEDG_NONE (0 << 8) +#define AT91_TC_EEVTEDG_RISING (1 << 8) +#define AT91_TC_EEVTEDG_FALLING (2 << 8) +#define AT91_TC_EEVTEDG_BOTH (3 << 8) +#define AT91_TC_EEVT (3 << 10) /* Waveform Mode: External Event Selection */ +#define AT91_TC_EEVT_TIOB (0 << 10) +#define AT91_TC_EEVT_XC0 (1 << 10) +#define AT91_TC_EEVT_XC1 (2 << 10) +#define AT91_TC_EEVT_XC2 (3 << 10) +#define AT91_TC_ENETRG (1 << 12) /* Waveform Mode: External Event Trigger Enable */ +#define AT91_TC_WAVESEL (3 << 13) /* Waveform Mode: Waveform Selection */ +#define AT91_TC_WAVESEL_UP (0 << 13) +#define AT91_TC_WAVESEL_UP_AUTO (2 << 13) +#define AT91_TC_WAVESEL_UPDOWN (1 << 13) +#define AT91_TC_WAVESEL_UPDOWN_AUTO (3 << 13) +#define AT91_TC_ACPA (3 << 16) /* Waveform Mode: RA Compare Effect on TIOA */ +#define AT91_TC_ACPA_NONE (0 << 16) +#define AT91_TC_ACPA_SET (1 << 16) +#define AT91_TC_ACPA_CLEAR (2 << 16) +#define AT91_TC_ACPA_TOGGLE (3 << 16) +#define AT91_TC_ACPC (3 << 18) /* Waveform Mode: RC Compre Effect on TIOA */ +#define AT91_TC_ACPC_NONE (0 << 18) +#define AT91_TC_ACPC_SET (1 << 18) +#define AT91_TC_ACPC_CLEAR (2 << 18) +#define AT91_TC_ACPC_TOGGLE (3 << 18) +#define AT91_TC_AEEVT (3 << 20) /* Waveform Mode: External Event Effect on TIOA */ +#define AT91_TC_AEEVT_NONE (0 << 20) +#define AT91_TC_AEEVT_SET (1 << 20) +#define AT91_TC_AEEVT_CLEAR (2 << 20) +#define AT91_TC_AEEVT_TOGGLE (3 << 20) +#define AT91_TC_ASWTRG (3 << 22) /* Waveform Mode: Software Trigger Effect on TIOA */ +#define AT91_TC_ASWTRG_NONE (0 << 22) +#define AT91_TC_ASWTRG_SET (1 << 22) +#define AT91_TC_ASWTRG_CLEAR (2 << 22) +#define AT91_TC_ASWTRG_TOGGLE (3 << 22) +#define AT91_TC_BCPB (3 << 24) /* Waveform Mode: RB Compare Effect on TIOB */ +#define AT91_TC_BCPB_NONE (0 << 24) +#define AT91_TC_BCPB_SET (1 << 24) +#define AT91_TC_BCPB_CLEAR (2 << 24) +#define AT91_TC_BCPB_TOGGLE (3 << 24) +#define AT91_TC_BCPC (3 << 26) /* Waveform Mode: RC Compare Effect on TIOB */ +#define AT91_TC_BCPC_NONE (0 << 26) +#define AT91_TC_BCPC_SET (1 << 26) +#define AT91_TC_BCPC_CLEAR (2 << 26) +#define AT91_TC_BCPC_TOGGLE (3 << 26) +#define AT91_TC_BEEVT (3 << 28) /* Waveform Mode: External Event Effect on TIOB */ +#define AT91_TC_BEEVT_NONE (0 << 28) +#define AT91_TC_BEEVT_SET (1 << 28) +#define AT91_TC_BEEVT_CLEAR (2 << 28) +#define AT91_TC_BEEVT_TOGGLE (3 << 28) +#define AT91_TC_BSWTRG (3 << 30) /* Waveform Mode: Software Trigger Effect on TIOB */ +#define AT91_TC_BSWTRG_NONE (0 << 30) +#define AT91_TC_BSWTRG_SET (1 << 30) +#define AT91_TC_BSWTRG_CLEAR (2 << 30) +#define AT91_TC_BSWTRG_TOGGLE (3 << 30) + +#define AT91_TC_CV 0x10 /* Counter Value */ +#define AT91_TC_RA 0x14 /* Register A */ +#define AT91_TC_RB 0x18 /* Register B */ +#define AT91_TC_RC 0x1c /* Register C */ + +#define AT91_TC_SR 0x20 /* Status Register */ +#define AT91_TC_COVFS (1 << 0) /* Counter Overflow Status */ +#define AT91_TC_LOVRS (1 << 1) /* Load Overrun Status */ +#define AT91_TC_CPAS (1 << 2) /* RA Compare Status */ +#define AT91_TC_CPBS (1 << 3) /* RB Compare Status */ +#define AT91_TC_CPCS (1 << 4) /* RC Compare Status */ +#define AT91_TC_LDRAS (1 << 5) /* RA Loading Status */ +#define AT91_TC_LDRBS (1 << 6) /* RB Loading Status */ +#define AT91_TC_ETRGS (1 << 7) /* External Trigger Status */ +#define AT91_TC_CLKSTA (1 << 16) /* Clock Enabling Status */ +#define AT91_TC_MTIOA (1 << 17) /* TIOA Mirror */ +#define AT91_TC_MTIOB (1 << 18) /* TIOB Mirror */ + +#define AT91_TC_IER 0x24 /* Interrupt Enable Register */ +#define AT91_TC_IDR 0x28 /* Interrupt Disable Register */ +#define AT91_TC_IMR 0x2c /* Interrupt Mask Register */ + +#endif diff --git a/arch/arm/mach-at91/include/mach/at91_twi.h b/arch/arm/mach-at91/include/mach/at91_twi.h new file mode 100644 index 00000000000..bb2880f6ba3 --- /dev/null +++ b/arch/arm/mach-at91/include/mach/at91_twi.h @@ -0,0 +1,68 @@ +/* + * arch/arm/mach-at91/include/mach/at91_twi.h + * + * Copyright (C) 2005 Ivan Kokshaysky + * Copyright (C) SAN People + * + * Two-wire Interface (TWI) registers. + * Based on AT91RM9200 datasheet revision E. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91_TWI_H +#define AT91_TWI_H + +#define AT91_TWI_CR 0x00 /* Control Register */ +#define AT91_TWI_START (1 << 0) /* Send a Start Condition */ +#define AT91_TWI_STOP (1 << 1) /* Send a Stop Condition */ +#define AT91_TWI_MSEN (1 << 2) /* Master Transfer Enable */ +#define AT91_TWI_MSDIS (1 << 3) /* Master Transfer Disable */ +#define AT91_TWI_SVEN (1 << 4) /* Slave Transfer Enable [SAM9260 only] */ +#define AT91_TWI_SVDIS (1 << 5) /* Slave Transfer Disable [SAM9260 only] */ +#define AT91_TWI_SWRST (1 << 7) /* Software Reset */ + +#define AT91_TWI_MMR 0x04 /* Master Mode Register */ +#define AT91_TWI_IADRSZ (3 << 8) /* Internal Device Address Size */ +#define AT91_TWI_IADRSZ_NO (0 << 8) +#define AT91_TWI_IADRSZ_1 (1 << 8) +#define AT91_TWI_IADRSZ_2 (2 << 8) +#define AT91_TWI_IADRSZ_3 (3 << 8) +#define AT91_TWI_MREAD (1 << 12) /* Master Read Direction */ +#define AT91_TWI_DADR (0x7f << 16) /* Device Address */ + +#define AT91_TWI_SMR 0x08 /* Slave Mode Register [SAM9260 only] */ +#define AT91_TWI_SADR (0x7f << 16) /* Slave Address */ + +#define AT91_TWI_IADR 0x0c /* Internal Address Register */ + +#define AT91_TWI_CWGR 0x10 /* Clock Waveform Generator Register */ +#define AT91_TWI_CLDIV (0xff << 0) /* Clock Low Divisor */ +#define AT91_TWI_CHDIV (0xff << 8) /* Clock High Divisor */ +#define AT91_TWI_CKDIV (7 << 16) /* Clock Divider */ + +#define AT91_TWI_SR 0x20 /* Status Register */ +#define AT91_TWI_TXCOMP (1 << 0) /* Transmission Complete */ +#define AT91_TWI_RXRDY (1 << 1) /* Receive Holding Register Ready */ +#define AT91_TWI_TXRDY (1 << 2) /* Transmit Holding Register Ready */ +#define AT91_TWI_SVREAD (1 << 3) /* Slave Read [SAM9260 only] */ +#define AT91_TWI_SVACC (1 << 4) /* Slave Access [SAM9260 only] */ +#define AT91_TWI_GACC (1 << 5) /* General Call Access [SAM9260 only] */ +#define AT91_TWI_OVRE (1 << 6) /* Overrun Error [AT91RM9200 only] */ +#define AT91_TWI_UNRE (1 << 7) /* Underrun Error [AT91RM9200 only] */ +#define AT91_TWI_NACK (1 << 8) /* Not Acknowledged */ +#define AT91_TWI_ARBLST (1 << 9) /* Arbitration Lost [SAM9260 only] */ +#define AT91_TWI_SCLWS (1 << 10) /* Clock Wait State [SAM9260 only] */ +#define AT91_TWI_EOSACC (1 << 11) /* End of Slave Address [SAM9260 only] */ + +#define AT91_TWI_IER 0x24 /* Interrupt Enable Register */ +#define AT91_TWI_IDR 0x28 /* Interrupt Disable Register */ +#define AT91_TWI_IMR 0x2c /* Interrupt Mask Register */ +#define AT91_TWI_RHR 0x30 /* Receive Holding Register */ +#define AT91_TWI_THR 0x34 /* Transmit Holding Register */ + +#endif + diff --git a/arch/arm/mach-at91/include/mach/at91_wdt.h b/arch/arm/mach-at91/include/mach/at91_wdt.h new file mode 100644 index 00000000000..973b4526a98 --- /dev/null +++ b/arch/arm/mach-at91/include/mach/at91_wdt.h @@ -0,0 +1,34 @@ +/* + * arch/arm/mach-at91/include/mach/at91_wdt.h + * + * Watchdog Timer (WDT) - System peripherals regsters. + * Based on AT91SAM9261 datasheet revision D. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91_WDT_H +#define AT91_WDT_H + +#define AT91_WDT_CR (AT91_WDT + 0x00) /* Watchdog Control Register */ +#define AT91_WDT_WDRSTT (1 << 0) /* Restart */ +#define AT91_WDT_KEY (0xa5 << 24) /* KEY Password */ + +#define AT91_WDT_MR (AT91_WDT + 0x04) /* Watchdog Mode Register */ +#define AT91_WDT_WDV (0xfff << 0) /* Counter Value */ +#define AT91_WDT_WDFIEN (1 << 12) /* Fault Interrupt Enable */ +#define AT91_WDT_WDRSTEN (1 << 13) /* Reset Processor */ +#define AT91_WDT_WDRPROC (1 << 14) /* Timer Restart */ +#define AT91_WDT_WDDIS (1 << 15) /* Watchdog Disable */ +#define AT91_WDT_WDD (0xfff << 16) /* Delta Value */ +#define AT91_WDT_WDDBGHLT (1 << 28) /* Debug Halt */ +#define AT91_WDT_WDIDLEHLT (1 << 29) /* Idle Halt */ + +#define AT91_WDT_SR (AT91_WDT + 0x08) /* Watchdog Status Register */ +#define AT91_WDT_WDUNF (1 << 0) /* Watchdog Underflow */ +#define AT91_WDT_WDERR (1 << 1) /* Watchdog Error */ + +#endif diff --git a/arch/arm/mach-at91/include/mach/at91cap9.h b/arch/arm/mach-at91/include/mach/at91cap9.h new file mode 100644 index 00000000000..4a4b64135a9 --- /dev/null +++ b/arch/arm/mach-at91/include/mach/at91cap9.h @@ -0,0 +1,126 @@ +/* + * arch/arm/mach-at91/include/mach/at91cap9.h + * + * Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com> + * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com> + * Copyright (C) 2007 Atmel Corporation. + * + * Common definitions. + * Based on AT91CAP9 datasheet revision B (Preliminary). + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91CAP9_H +#define AT91CAP9_H + +/* + * Peripheral identifiers/interrupts. + */ +#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ +#define AT91_ID_SYS 1 /* System Peripherals */ +#define AT91CAP9_ID_PIOABCD 2 /* Parallel IO Controller A, B, C and D */ +#define AT91CAP9_ID_MPB0 3 /* MP Block Peripheral 0 */ +#define AT91CAP9_ID_MPB1 4 /* MP Block Peripheral 1 */ +#define AT91CAP9_ID_MPB2 5 /* MP Block Peripheral 2 */ +#define AT91CAP9_ID_MPB3 6 /* MP Block Peripheral 3 */ +#define AT91CAP9_ID_MPB4 7 /* MP Block Peripheral 4 */ +#define AT91CAP9_ID_US0 8 /* USART 0 */ +#define AT91CAP9_ID_US1 9 /* USART 1 */ +#define AT91CAP9_ID_US2 10 /* USART 2 */ +#define AT91CAP9_ID_MCI0 11 /* Multimedia Card Interface 0 */ +#define AT91CAP9_ID_MCI1 12 /* Multimedia Card Interface 1 */ +#define AT91CAP9_ID_CAN 13 /* CAN */ +#define AT91CAP9_ID_TWI 14 /* Two-Wire Interface */ +#define AT91CAP9_ID_SPI0 15 /* Serial Peripheral Interface 0 */ +#define AT91CAP9_ID_SPI1 16 /* Serial Peripheral Interface 0 */ +#define AT91CAP9_ID_SSC0 17 /* Serial Synchronous Controller 0 */ +#define AT91CAP9_ID_SSC1 18 /* Serial Synchronous Controller 1 */ +#define AT91CAP9_ID_AC97C 19 /* AC97 Controller */ +#define AT91CAP9_ID_TCB 20 /* Timer Counter 0, 1 and 2 */ +#define AT91CAP9_ID_PWMC 21 /* Pulse Width Modulation Controller */ +#define AT91CAP9_ID_EMAC 22 /* Ethernet */ +#define AT91CAP9_ID_AESTDES 23 /* Advanced Encryption Standard, Triple DES */ +#define AT91CAP9_ID_ADC 24 /* Analog-to-Digital Converter */ +#define AT91CAP9_ID_ISI 25 /* Image Sensor Interface */ +#define AT91CAP9_ID_LCDC 26 /* LCD Controller */ +#define AT91CAP9_ID_DMA 27 /* DMA Controller */ +#define AT91CAP9_ID_UDPHS 28 /* USB High Speed Device Port */ +#define AT91CAP9_ID_UHP 29 /* USB Host Port */ +#define AT91CAP9_ID_IRQ0 30 /* Advanced Interrupt Controller (IRQ0) */ +#define AT91CAP9_ID_IRQ1 31 /* Advanced Interrupt Controller (IRQ1) */ + +/* + * User Peripheral physical base addresses. + */ +#define AT91CAP9_BASE_UDPHS 0xfff78000 +#define AT91CAP9_BASE_TCB0 0xfff7c000 +#define AT91CAP9_BASE_TC0 0xfff7c000 +#define AT91CAP9_BASE_TC1 0xfff7c040 +#define AT91CAP9_BASE_TC2 0xfff7c080 +#define AT91CAP9_BASE_MCI0 0xfff80000 +#define AT91CAP9_BASE_MCI1 0xfff84000 +#define AT91CAP9_BASE_TWI 0xfff88000 +#define AT91CAP9_BASE_US0 0xfff8c000 +#define AT91CAP9_BASE_US1 0xfff90000 +#define AT91CAP9_BASE_US2 0xfff94000 +#define AT91CAP9_BASE_SSC0 0xfff98000 +#define AT91CAP9_BASE_SSC1 0xfff9c000 +#define AT91CAP9_BASE_AC97C 0xfffa0000 +#define AT91CAP9_BASE_SPI0 0xfffa4000 +#define AT91CAP9_BASE_SPI1 0xfffa8000 +#define AT91CAP9_BASE_CAN 0xfffac000 +#define AT91CAP9_BASE_PWMC 0xfffb8000 +#define AT91CAP9_BASE_EMAC 0xfffbc000 +#define AT91CAP9_BASE_ADC 0xfffc0000 +#define AT91CAP9_BASE_ISI 0xfffc4000 +#define AT91_BASE_SYS 0xffffe200 + +/* + * System Peripherals (offset from AT91_BASE_SYS) + */ +#define AT91_ECC (0xffffe200 - AT91_BASE_SYS) +#define AT91_BCRAMC (0xffffe400 - AT91_BASE_SYS) +#define AT91_DDRSDRC (0xffffe600 - AT91_BASE_SYS) +#define AT91_SMC (0xffffe800 - AT91_BASE_SYS) +#define AT91_MATRIX (0xffffea00 - AT91_BASE_SYS) +#define AT91_CCFG (0xffffeb10 - AT91_BASE_SYS) +#define AT91_DMA (0xffffec00 - AT91_BASE_SYS) +#define AT91_DBGU (0xffffee00 - AT91_BASE_SYS) +#define AT91_AIC (0xfffff000 - AT91_BASE_SYS) +#define AT91_PIOA (0xfffff200 - AT91_BASE_SYS) +#define AT91_PIOB (0xfffff400 - AT91_BASE_SYS) +#define AT91_PIOC (0xfffff600 - AT91_BASE_SYS) +#define AT91_PIOD (0xfffff800 - AT91_BASE_SYS) +#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) +#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS) +#define AT91_SHDWC (0xfffffd10 - AT91_BASE_SYS) +#define AT91_RTT (0xfffffd20 - AT91_BASE_SYS) +#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS) +#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS) +#define AT91_GPBR (0xfffffd50 - AT91_BASE_SYS) + +#define AT91_USART0 AT91CAP9_BASE_US0 +#define AT91_USART1 AT91CAP9_BASE_US1 +#define AT91_USART2 AT91CAP9_BASE_US2 + + +/* + * Internal Memory. + */ +#define AT91CAP9_SRAM_BASE 0x00100000 /* Internal SRAM base address */ +#define AT91CAP9_SRAM_SIZE (32 * SZ_1K) /* Internal SRAM size (32Kb) */ + +#define AT91CAP9_ROM_BASE 0x00400000 /* Internal ROM base address */ +#define AT91CAP9_ROM_SIZE (32 * SZ_1K) /* Internal ROM size (32Kb) */ + +#define AT91CAP9_LCDC_BASE 0x00500000 /* LCD Controller */ +#define AT91CAP9_UDPHS_FIFO 0x00600000 /* USB High Speed Device Port */ +#define AT91CAP9_UHP_BASE 0x00700000 /* USB Host controller */ + +#define CONFIG_DRAM_BASE AT91_CHIPSELECT_6 + +#endif diff --git a/arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h b/arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h new file mode 100644 index 00000000000..bca878f3bd8 --- /dev/null +++ b/arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h @@ -0,0 +1,100 @@ +/* + * arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h + * + * DDR/SDR Controller (DDRSDRC) - System peripherals registers. + * Based on AT91CAP9 datasheet revision B. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91CAP9_DDRSDR_H +#define AT91CAP9_DDRSDR_H + +#define AT91_DDRSDRC_MR (AT91_DDRSDRC + 0x00) /* Mode Register */ +#define AT91_DDRSDRC_MODE (0xf << 0) /* Command Mode */ +#define AT91_DDRSDRC_MODE_NORMAL 0 +#define AT91_DDRSDRC_MODE_NOP 1 +#define AT91_DDRSDRC_MODE_PRECHARGE 2 +#define AT91_DDRSDRC_MODE_LMR 3 +#define AT91_DDRSDRC_MODE_REFRESH 4 +#define AT91_DDRSDRC_MODE_EXT_LMR 5 +#define AT91_DDRSDRC_MODE_DEEP 6 + +#define AT91_DDRSDRC_RTR (AT91_DDRSDRC + 0x04) /* Refresh Timer Register */ +#define AT91_DDRSDRC_COUNT (0xfff << 0) /* Refresh Timer Counter */ + +#define AT91_DDRSDRC_CR (AT91_DDRSDRC + 0x08) /* Configuration Register */ +#define AT91_DDRSDRC_NC (3 << 0) /* Number of Column Bits */ +#define AT91_DDRSDRC_NC_SDR8 (0 << 0) +#define AT91_DDRSDRC_NC_SDR9 (1 << 0) +#define AT91_DDRSDRC_NC_SDR10 (2 << 0) +#define AT91_DDRSDRC_NC_SDR11 (3 << 0) +#define AT91_DDRSDRC_NC_DDR9 (0 << 0) +#define AT91_DDRSDRC_NC_DDR10 (1 << 0) +#define AT91_DDRSDRC_NC_DDR11 (2 << 0) +#define AT91_DDRSDRC_NC_DDR12 (3 << 0) +#define AT91_DDRSDRC_NR (3 << 2) /* Number of Row Bits */ +#define AT91_DDRSDRC_NR_11 (0 << 2) +#define AT91_DDRSDRC_NR_12 (1 << 2) +#define AT91_DDRSDRC_NR_13 (2 << 2) +#define AT91_DDRSDRC_CAS (7 << 4) /* CAS Latency */ +#define AT91_DDRSDRC_CAS_2 (2 << 4) +#define AT91_DDRSDRC_CAS_3 (3 << 4) +#define AT91_DDRSDRC_CAS_25 (6 << 4) +#define AT91_DDRSDRC_DLL (1 << 7) /* Reset DLL */ +#define AT91_DDRSDRC_DICDS (1 << 8) /* Output impedance control */ + +#define AT91_DDRSDRC_T0PR (AT91_DDRSDRC + 0x0C) /* Timing 0 Register */ +#define AT91_DDRSDRC_TRAS (0xf << 0) /* Active to Precharge delay */ +#define AT91_DDRSDRC_TRCD (0xf << 4) /* Row to Column delay */ +#define AT91_DDRSDRC_TWR (0xf << 8) /* Write recovery delay */ +#define AT91_DDRSDRC_TRC (0xf << 12) /* Row cycle delay */ +#define AT91_DDRSDRC_TRP (0xf << 16) /* Row precharge delay */ +#define AT91_DDRSDRC_TRRD (0xf << 20) /* Active BankA to BankB */ +#define AT91_DDRSDRC_TWTR (1 << 24) /* Internal Write to Read delay */ +#define AT91_DDRSDRC_TMRD (0xf << 28) /* Load mode to active/refresh delay */ + +#define AT91_DDRSDRC_T1PR (AT91_DDRSDRC + 0x10) /* Timing 1 Register */ +#define AT91_DDRSDRC_TRFC (0x1f << 0) /* Row Cycle Delay */ +#define AT91_DDRSDRC_TXSNR (0xff << 8) /* Exit self-refresh to non-read */ +#define AT91_DDRSDRC_TXSRD (0xff << 16) /* Exit self-refresh to read */ +#define AT91_DDRSDRC_TXP (0xf << 24) /* Exit power-down delay */ + +#define AT91_DDRSDRC_LPR (AT91_DDRSDRC + 0x18) /* Low Power Register */ +#define AT91_DDRSDRC_LPCB (3 << 0) /* Low-power Configurations */ +#define AT91_DDRSDRC_LPCB_DISABLE 0 +#define AT91_DDRSDRC_LPCB_SELF_REFRESH 1 +#define AT91_DDRSDRC_LPCB_POWER_DOWN 2 +#define AT91_DDRSDRC_LPCB_DEEP_POWER_DOWN 3 +#define AT91_DDRSDRC_CLKFR (1 << 2) /* Clock Frozen */ +#define AT91_DDRSDRC_PASR (7 << 4) /* Partial Array Self Refresh */ +#define AT91_DDRSDRC_TCSR (3 << 8) /* Temperature Compensated Self Refresh */ +#define AT91_DDRSDRC_DS (3 << 10) /* Drive Strength */ +#define AT91_DDRSDRC_TIMEOUT (3 << 12) /* Time to define when Low Power Mode is enabled */ +#define AT91_DDRSDRC_TIMEOUT_0_CLK_CYCLES (0 << 12) +#define AT91_DDRSDRC_TIMEOUT_64_CLK_CYCLES (1 << 12) +#define AT91_DDRSDRC_TIMEOUT_128_CLK_CYCLES (2 << 12) + +#define AT91_DDRSDRC_MDR (AT91_DDRSDRC + 0x1C) /* Memory Device Register */ +#define AT91_DDRSDRC_MD (3 << 0) /* Memory Device Type */ +#define AT91_DDRSDRC_MD_SDR 0 +#define AT91_DDRSDRC_MD_LOW_POWER_SDR 1 +#define AT91_DDRSDRC_MD_DDR 2 +#define AT91_DDRSDRC_MD_LOW_POWER_DDR 3 + +#define AT91_DDRSDRC_DLLR (AT91_DDRSDRC + 0x20) /* DLL Information Register */ +#define AT91_DDRSDRC_MDINC (1 << 0) /* Master Delay increment */ +#define AT91_DDRSDRC_MDDEC (1 << 1) /* Master Delay decrement */ +#define AT91_DDRSDRC_MDOVF (1 << 2) /* Master Delay Overflow */ +#define AT91_DDRSDRC_SDCOVF (1 << 3) /* Slave Delay Correction Overflow */ +#define AT91_DDRSDRC_SDCUDF (1 << 4) /* Slave Delay Correction Underflow */ +#define AT91_DDRSDRC_SDERF (1 << 5) /* Slave Delay Correction error */ +#define AT91_DDRSDRC_MDVAL (0xff << 8) /* Master Delay value */ +#define AT91_DDRSDRC_SDVAL (0xff << 16) /* Slave Delay value */ +#define AT91_DDRSDRC_SDCVAL (0xff << 24) /* Slave Delay Correction value */ + + +#endif diff --git a/arch/arm/mach-at91/include/mach/at91cap9_matrix.h b/arch/arm/mach-at91/include/mach/at91cap9_matrix.h new file mode 100644 index 00000000000..4b9d4aff4b4 --- /dev/null +++ b/arch/arm/mach-at91/include/mach/at91cap9_matrix.h @@ -0,0 +1,137 @@ +/* + * arch/arm/mach-at91/include/mach/at91cap9_matrix.h + * + * Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com> + * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com> + * Copyright (C) 2006 Atmel Corporation. + * + * Memory Controllers (MATRIX, EBI) - System peripherals registers. + * Based on AT91CAP9 datasheet revision B (Preliminary). + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91CAP9_MATRIX_H +#define AT91CAP9_MATRIX_H + +#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */ +#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */ +#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */ +#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */ +#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */ +#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */ +#define AT91_MATRIX_MCFG6 (AT91_MATRIX + 0x18) /* Master Configuration Register 6 */ +#define AT91_MATRIX_MCFG7 (AT91_MATRIX + 0x1C) /* Master Configuration Register 7 */ +#define AT91_MATRIX_MCFG8 (AT91_MATRIX + 0x20) /* Master Configuration Register 8 */ +#define AT91_MATRIX_MCFG9 (AT91_MATRIX + 0x24) /* Master Configuration Register 9 */ +#define AT91_MATRIX_MCFG10 (AT91_MATRIX + 0x28) /* Master Configuration Register 10 */ +#define AT91_MATRIX_MCFG11 (AT91_MATRIX + 0x2C) /* Master Configuration Register 11 */ +#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */ +#define AT91_MATRIX_ULBT_INFINITE (0 << 0) +#define AT91_MATRIX_ULBT_SINGLE (1 << 0) +#define AT91_MATRIX_ULBT_FOUR (2 << 0) +#define AT91_MATRIX_ULBT_EIGHT (3 << 0) +#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0) + +#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */ +#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */ +#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */ +#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */ +#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */ +#define AT91_MATRIX_SCFG5 (AT91_MATRIX + 0x54) /* Slave Configuration Register 5 */ +#define AT91_MATRIX_SCFG6 (AT91_MATRIX + 0x58) /* Slave Configuration Register 6 */ +#define AT91_MATRIX_SCFG7 (AT91_MATRIX + 0x5C) /* Slave Configuration Register 7 */ +#define AT91_MATRIX_SCFG8 (AT91_MATRIX + 0x60) /* Slave Configuration Register 8 */ +#define AT91_MATRIX_SCFG9 (AT91_MATRIX + 0x64) /* Slave Configuration Register 9 */ +#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */ +#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */ +#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16) +#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16) +#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16) +#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */ +#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */ +#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24) +#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24) + +#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */ +#define AT91_MATRIX_PRBS0 (AT91_MATRIX + 0x84) /* Priority Register B for Slave 0 */ +#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */ +#define AT91_MATRIX_PRBS1 (AT91_MATRIX + 0x8C) /* Priority Register B for Slave 1 */ +#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */ +#define AT91_MATRIX_PRBS2 (AT91_MATRIX + 0x94) /* Priority Register B for Slave 2 */ +#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */ +#define AT91_MATRIX_PRBS3 (AT91_MATRIX + 0x9C) /* Priority Register B for Slave 3 */ +#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */ +#define AT91_MATRIX_PRBS4 (AT91_MATRIX + 0xA4) /* Priority Register B for Slave 4 */ +#define AT91_MATRIX_PRAS5 (AT91_MATRIX + 0xA8) /* Priority Register A for Slave 5 */ +#define AT91_MATRIX_PRBS5 (AT91_MATRIX + 0xAC) /* Priority Register B for Slave 5 */ +#define AT91_MATRIX_PRAS6 (AT91_MATRIX + 0xB0) /* Priority Register A for Slave 6 */ +#define AT91_MATRIX_PRBS6 (AT91_MATRIX + 0xB4) /* Priority Register B for Slave 6 */ +#define AT91_MATRIX_PRAS7 (AT91_MATRIX + 0xB8) /* Priority Register A for Slave 7 */ +#define AT91_MATRIX_PRBS7 (AT91_MATRIX + 0xBC) /* Priority Register B for Slave 7 */ +#define AT91_MATRIX_PRAS8 (AT91_MATRIX + 0xC0) /* Priority Register A for Slave 8 */ +#define AT91_MATRIX_PRBS8 (AT91_MATRIX + 0xC4) /* Priority Register B for Slave 8 */ +#define AT91_MATRIX_PRAS9 (AT91_MATRIX + 0xC8) /* Priority Register A for Slave 9 */ +#define AT91_MATRIX_PRBS9 (AT91_MATRIX + 0xCC) /* Priority Register B for Slave 9 */ +#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */ +#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */ +#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */ +#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */ +#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */ +#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */ +#define AT91_MATRIX_M6PR (3 << 24) /* Master 6 Priority */ +#define AT91_MATRIX_M7PR (3 << 28) /* Master 7 Priority */ +#define AT91_MATRIX_M8PR (3 << 0) /* Master 8 Priority (in Register B) */ +#define AT91_MATRIX_M9PR (3 << 4) /* Master 9 Priority (in Register B) */ +#define AT91_MATRIX_M10PR (3 << 8) /* Master 10 Priority (in Register B) */ +#define AT91_MATRIX_M11PR (3 << 12) /* Master 11 Priority (in Register B) */ + +#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */ +#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */ +#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */ +#define AT91_MATRIX_RCB2 (1 << 2) +#define AT91_MATRIX_RCB3 (1 << 3) +#define AT91_MATRIX_RCB4 (1 << 4) +#define AT91_MATRIX_RCB5 (1 << 5) +#define AT91_MATRIX_RCB6 (1 << 6) +#define AT91_MATRIX_RCB7 (1 << 7) +#define AT91_MATRIX_RCB8 (1 << 8) +#define AT91_MATRIX_RCB9 (1 << 9) +#define AT91_MATRIX_RCB10 (1 << 10) +#define AT91_MATRIX_RCB11 (1 << 11) + +#define AT91_MPBS0_SFR (AT91_MATRIX + 0x114) /* MPBlock Slave 0 Special Function Register */ +#define AT91_MPBS1_SFR (AT91_MATRIX + 0x11C) /* MPBlock Slave 1 Special Function Register */ + +#define AT91_MATRIX_UDPHS (AT91_MATRIX + 0x118) /* USBHS Special Function Register [AT91CAP9 only] */ +#define AT91_MATRIX_SELECT_UDPHS (0 << 31) /* select High Speed UDP */ +#define AT91_MATRIX_SELECT_UDP (1 << 31) /* select standard UDP */ +#define AT91_MATRIX_UDPHS_BYPASS_LOCK (1 << 30) /* bypass lock bit */ + +#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x120) /* EBI Chip Select Assignment Register */ +#define AT91_MATRIX_EBI_CS1A (1 << 1) /* Chip Select 1 Assignment */ +#define AT91_MATRIX_EBI_CS1A_SMC (0 << 1) +#define AT91_MATRIX_EBI_CS1A_BCRAMC (1 << 1) +#define AT91_MATRIX_EBI_CS3A (1 << 3) /* Chip Select 3 Assignment */ +#define AT91_MATRIX_EBI_CS3A_SMC (0 << 3) +#define AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA (1 << 3) +#define AT91_MATRIX_EBI_CS4A (1 << 4) /* Chip Select 4 Assignment */ +#define AT91_MATRIX_EBI_CS4A_SMC (0 << 4) +#define AT91_MATRIX_EBI_CS4A_SMC_CF1 (1 << 4) +#define AT91_MATRIX_EBI_CS5A (1 << 5) /* Chip Select 5 Assignment */ +#define AT91_MATRIX_EBI_CS5A_SMC (0 << 5) +#define AT91_MATRIX_EBI_CS5A_SMC_CF2 (1 << 5) +#define AT91_MATRIX_EBI_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */ +#define AT91_MATRIX_EBI_DQSPDC (1 << 9) /* Data Qualifier Strobe Pull-Down Configuration */ +#define AT91_MATRIX_EBI_VDDIOMSEL (1 << 16) /* Memory voltage selection */ +#define AT91_MATRIX_EBI_VDDIOMSEL_1_8V (0 << 16) +#define AT91_MATRIX_EBI_VDDIOMSEL_3_3V (1 << 16) + +#define AT91_MPBS2_SFR (AT91_MATRIX + 0x12C) /* MPBlock Slave 2 Special Function Register */ +#define AT91_MPBS3_SFR (AT91_MATRIX + 0x130) /* MPBlock Slave 3 Special Function Register */ +#define AT91_APB_SFR (AT91_MATRIX + 0x134) /* APB Bridge Special Function Register */ + +#endif diff --git a/arch/arm/mach-at91/include/mach/at91rm9200.h b/arch/arm/mach-at91/include/mach/at91rm9200.h new file mode 100644 index 00000000000..78983155a07 --- /dev/null +++ b/arch/arm/mach-at91/include/mach/at91rm9200.h @@ -0,0 +1,115 @@ +/* + * arch/arm/mach-at91/include/mach/at91rm9200.h + * + * Copyright (C) 2005 Ivan Kokshaysky + * Copyright (C) SAN People + * + * Common definitions. + * Based on AT91RM9200 datasheet revision E. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91RM9200_H +#define AT91RM9200_H + +/* + * Peripheral identifiers/interrupts. + */ +#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ +#define AT91_ID_SYS 1 /* System Peripheral */ +#define AT91RM9200_ID_PIOA 2 /* Parallel IO Controller A */ +#define AT91RM9200_ID_PIOB 3 /* Parallel IO Controller B */ +#define AT91RM9200_ID_PIOC 4 /* Parallel IO Controller C */ +#define AT91RM9200_ID_PIOD 5 /* Parallel IO Controller D */ +#define AT91RM9200_ID_US0 6 /* USART 0 */ +#define AT91RM9200_ID_US1 7 /* USART 1 */ +#define AT91RM9200_ID_US2 8 /* USART 2 */ +#define AT91RM9200_ID_US3 9 /* USART 3 */ +#define AT91RM9200_ID_MCI 10 /* Multimedia Card Interface */ +#define AT91RM9200_ID_UDP 11 /* USB Device Port */ +#define AT91RM9200_ID_TWI 12 /* Two-Wire Interface */ +#define AT91RM9200_ID_SPI 13 /* Serial Peripheral Interface */ +#define AT91RM9200_ID_SSC0 14 /* Serial Synchronous Controller 0 */ +#define AT91RM9200_ID_SSC1 15 /* Serial Synchronous Controller 1 */ +#define AT91RM9200_ID_SSC2 16 /* Serial Synchronous Controller 2 */ +#define AT91RM9200_ID_TC0 17 /* Timer Counter 0 */ +#define AT91RM9200_ID_TC1 18 /* Timer Counter 1 */ +#define AT91RM9200_ID_TC2 19 /* Timer Counter 2 */ +#define AT91RM9200_ID_TC3 20 /* Timer Counter 3 */ +#define AT91RM9200_ID_TC4 21 /* Timer Counter 4 */ +#define AT91RM9200_ID_TC5 22 /* Timer Counter 5 */ +#define AT91RM9200_ID_UHP 23 /* USB Host port */ +#define AT91RM9200_ID_EMAC 24 /* Ethernet MAC */ +#define AT91RM9200_ID_IRQ0 25 /* Advanced Interrupt Controller (IRQ0) */ +#define AT91RM9200_ID_IRQ1 26 /* Advanced Interrupt Controller (IRQ1) */ +#define AT91RM9200_ID_IRQ2 27 /* Advanced Interrupt Controller (IRQ2) */ +#define AT91RM9200_ID_IRQ3 28 /* Advanced Interrupt Controller (IRQ3) */ +#define AT91RM9200_ID_IRQ4 29 /* Advanced Interrupt Controller (IRQ4) */ +#define AT91RM9200_ID_IRQ5 30 /* Advanced Interrupt Controller (IRQ5) */ +#define AT91RM9200_ID_IRQ6 31 /* Advanced Interrupt Controller (IRQ6) */ + + +/* + * Peripheral physical base addresses. + */ +#define AT91RM9200_BASE_TCB0 0xfffa0000 +#define AT91RM9200_BASE_TC0 0xfffa0000 +#define AT91RM9200_BASE_TC1 0xfffa0040 +#define AT91RM9200_BASE_TC2 0xfffa0080 +#define AT91RM9200_BASE_TCB1 0xfffa4000 +#define AT91RM9200_BASE_TC3 0xfffa4000 +#define AT91RM9200_BASE_TC4 0xfffa4040 +#define AT91RM9200_BASE_TC5 0xfffa4080 +#define AT91RM9200_BASE_UDP 0xfffb0000 +#define AT91RM9200_BASE_MCI 0xfffb4000 +#define AT91RM9200_BASE_TWI 0xfffb8000 +#define AT91RM9200_BASE_EMAC 0xfffbc000 +#define AT91RM9200_BASE_US0 0xfffc0000 +#define AT91RM9200_BASE_US1 0xfffc4000 +#define AT91RM9200_BASE_US2 0xfffc8000 +#define AT91RM9200_BASE_US3 0xfffcc000 +#define AT91RM9200_BASE_SSC0 0xfffd0000 +#define AT91RM9200_BASE_SSC1 0xfffd4000 +#define AT91RM9200_BASE_SSC2 0xfffd8000 +#define AT91RM9200_BASE_SPI 0xfffe0000 +#define AT91_BASE_SYS 0xfffff000 + + +/* + * System Peripherals (offset from AT91_BASE_SYS) + */ +#define AT91_AIC (0xfffff000 - AT91_BASE_SYS) /* Advanced Interrupt Controller */ +#define AT91_DBGU (0xfffff200 - AT91_BASE_SYS) /* Debug Unit */ +#define AT91_PIOA (0xfffff400 - AT91_BASE_SYS) /* PIO Controller A */ +#define AT91_PIOB (0xfffff600 - AT91_BASE_SYS) /* PIO Controller B */ +#define AT91_PIOC (0xfffff800 - AT91_BASE_SYS) /* PIO Controller C */ +#define AT91_PIOD (0xfffffa00 - AT91_BASE_SYS) /* PIO Controller D */ +#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) /* Power Management Controller */ +#define AT91_ST (0xfffffd00 - AT91_BASE_SYS) /* System Timer */ +#define AT91_RTC (0xfffffe00 - AT91_BASE_SYS) /* Real-Time Clock */ +#define AT91_MC (0xffffff00 - AT91_BASE_SYS) /* Memory Controllers */ + +#define AT91_USART0 AT91RM9200_BASE_US0 +#define AT91_USART1 AT91RM9200_BASE_US1 +#define AT91_USART2 AT91RM9200_BASE_US2 +#define AT91_USART3 AT91RM9200_BASE_US3 + +#define AT91_MATRIX 0 /* not supported */ + +/* + * Internal Memory. + */ +#define AT91RM9200_ROM_BASE 0x00100000 /* Internal ROM base address */ +#define AT91RM9200_ROM_SIZE SZ_128K /* Internal ROM size (128Kb) */ + +#define AT91RM9200_SRAM_BASE 0x00200000 /* Internal SRAM base address */ +#define AT91RM9200_SRAM_SIZE SZ_16K /* Internal SRAM size (16Kb) */ + +#define AT91RM9200_UHP_BASE 0x00300000 /* USB Host controller */ + + +#endif diff --git a/arch/arm/mach-at91/include/mach/at91rm9200_emac.h b/arch/arm/mach-at91/include/mach/at91rm9200_emac.h new file mode 100644 index 00000000000..b8260cd8041 --- /dev/null +++ b/arch/arm/mach-at91/include/mach/at91rm9200_emac.h @@ -0,0 +1,138 @@ +/* + * arch/arm/mach-at91/include/mach/at91rm9200_emac.h + * + * Copyright (C) 2005 Ivan Kokshaysky + * Copyright (C) SAN People + * + * Ethernet MAC registers. + * Based on AT91RM9200 datasheet revision E. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91RM9200_EMAC_H +#define AT91RM9200_EMAC_H + +#define AT91_EMAC_CTL 0x00 /* Control Register */ +#define AT91_EMAC_LB (1 << 0) /* Loopback */ +#define AT91_EMAC_LBL (1 << 1) /* Loopback Local */ +#define AT91_EMAC_RE (1 << 2) /* Receive Enable */ +#define AT91_EMAC_TE (1 << 3) /* Transmit Enable */ +#define AT91_EMAC_MPE (1 << 4) /* Management Port Enable */ +#define AT91_EMAC_CSR (1 << 5) /* Clear Statistics Registers */ +#define AT91_EMAC_INCSTAT (1 << 6) /* Increment Statistics Registers */ +#define AT91_EMAC_WES (1 << 7) /* Write Enable for Statistics Registers */ +#define AT91_EMAC_BP (1 << 8) /* Back Pressure */ + +#define AT91_EMAC_CFG 0x04 /* Configuration Register */ +#define AT91_EMAC_SPD (1 << 0) /* Speed */ +#define AT91_EMAC_FD (1 << 1) /* Full Duplex */ +#define AT91_EMAC_BR (1 << 2) /* Bit Rate */ +#define AT91_EMAC_CAF (1 << 4) /* Copy All Frames */ +#define AT91_EMAC_NBC (1 << 5) /* No Broadcast */ +#define AT91_EMAC_MTI (1 << 6) /* Multicast Hash Enable */ +#define AT91_EMAC_UNI (1 << 7) /* Unicast Hash Enable */ +#define AT91_EMAC_BIG (1 << 8) /* Receive 1522 Bytes */ +#define AT91_EMAC_EAE (1 << 9) /* External Address Match Enable */ +#define AT91_EMAC_CLK (3 << 10) /* MDC Clock Divisor */ +#define AT91_EMAC_CLK_DIV8 (0 << 10) +#define AT91_EMAC_CLK_DIV16 (1 << 10) +#define AT91_EMAC_CLK_DIV32 (2 << 10) +#define AT91_EMAC_CLK_DIV64 (3 << 10) +#define AT91_EMAC_RTY (1 << 12) /* Retry Test */ +#define AT91_EMAC_RMII (1 << 13) /* Reduce MII (RMII) */ + +#define AT91_EMAC_SR 0x08 /* Status Register */ +#define AT91_EMAC_SR_LINK (1 << 0) /* Link */ +#define AT91_EMAC_SR_MDIO (1 << 1) /* MDIO pin */ +#define AT91_EMAC_SR_IDLE (1 << 2) /* PHY idle */ + +#define AT91_EMAC_TAR 0x0c /* Transmit Address Register */ + +#define AT91_EMAC_TCR 0x10 /* Transmit Control Register */ +#define AT91_EMAC_LEN (0x7ff << 0) /* Transmit Frame Length */ +#define AT91_EMAC_NCRC (1 << 15) /* No CRC */ + +#define AT91_EMAC_TSR 0x14 /* Transmit Status Register */ +#define AT91_EMAC_TSR_OVR (1 << 0) /* Transmit Buffer Overrun */ +#define AT91_EMAC_TSR_COL (1 << 1) /* Collision Occurred */ +#define AT91_EMAC_TSR_RLE (1 << 2) /* Retry Limit Exceeded */ +#define AT91_EMAC_TSR_IDLE (1 << 3) /* Transmitter Idle */ +#define AT91_EMAC_TSR_BNQ (1 << 4) /* Transmit Buffer not Queued */ +#define AT91_EMAC_TSR_COMP (1 << 5) /* Transmit Complete */ +#define AT91_EMAC_TSR_UND (1 << 6) /* Transmit Underrun */ + +#define AT91_EMAC_RBQP 0x18 /* Receive Buffer Queue Pointer */ + +#define AT91_EMAC_RSR 0x20 /* Receive Status Register */ +#define AT91_EMAC_RSR_BNA (1 << 0) /* Buffer Not Available */ +#define AT91_EMAC_RSR_REC (1 << 1) /* Frame Received */ +#define AT91_EMAC_RSR_OVR (1 << 2) /* RX Overrun */ + +#define AT91_EMAC_ISR 0x24 /* Interrupt Status Register */ +#define AT91_EMAC_DONE (1 << 0) /* Management Done */ +#define AT91_EMAC_RCOM (1 << 1) /* Receive Complete */ +#define AT91_EMAC_RBNA (1 << 2) /* Receive Buffer Not Available */ +#define AT91_EMAC_TOVR (1 << 3) /* Transmit Buffer Overrun */ +#define AT91_EMAC_TUND (1 << 4) /* Transmit Buffer Underrun */ +#define AT91_EMAC_RTRY (1 << 5) /* Retry Limit */ +#define AT91_EMAC_TBRE (1 << 6) /* Transmit Buffer Register Empty */ +#define AT91_EMAC_TCOM (1 << 7) /* Transmit Complete */ +#define AT91_EMAC_TIDLE (1 << 8) /* Transmit Idle */ +#define AT91_EMAC_LINK (1 << 9) /* Link */ +#define AT91_EMAC_ROVR (1 << 10) /* RX Overrun */ +#define AT91_EMAC_ABT (1 << 11) /* Abort */ + +#define AT91_EMAC_IER 0x28 /* Interrupt Enable Register */ +#define AT91_EMAC_IDR 0x2c /* Interrupt Disable Register */ +#define AT91_EMAC_IMR 0x30 /* Interrupt Mask Register */ + +#define AT91_EMAC_MAN 0x34 /* PHY Maintenance Register */ +#define AT91_EMAC_DATA (0xffff << 0) /* MDIO Data */ +#define AT91_EMAC_REGA (0x1f << 18) /* MDIO Register */ +#define AT91_EMAC_PHYA (0x1f << 23) /* MDIO PHY Address */ +#define AT91_EMAC_RW (3 << 28) /* Read/Write operation */ +#define AT91_EMAC_RW_W (1 << 28) +#define AT91_EMAC_RW_R (2 << 28) +#define AT91_EMAC_MAN_802_3 0x40020000 /* IEEE 802.3 value */ + +/* + * Statistics Registers. + */ +#define AT91_EMAC_FRA 0x40 /* Frames Transmitted OK */ +#define AT91_EMAC_SCOL 0x44 /* Single Collision Frame */ +#define AT91_EMAC_MCOL 0x48 /* Multiple Collision Frame */ +#define AT91_EMAC_OK 0x4c /* Frames Received OK */ +#define AT91_EMAC_SEQE 0x50 /* Frame Check Sequence Error */ +#define AT91_EMAC_ALE 0x54 /* Alignmemt Error */ +#define AT91_EMAC_DTE 0x58 /* Deffered Transmission Frame */ +#define AT91_EMAC_LCOL 0x5c /* Late Collision */ +#define AT91_EMAC_ECOL 0x60 /* Excessive Collision */ +#define AT91_EMAC_TUE 0x64 /* Transmit Underrun Error */ +#define AT91_EMAC_CSE 0x68 /* Carrier Sense Error */ +#define AT91_EMAC_DRFC 0x6c /* Discard RX Frame */ +#define AT91_EMAC_ROV 0x70 /* Receive Overrun */ +#define AT91_EMAC_CDE 0x74 /* Code Error */ +#define AT91_EMAC_ELR 0x78 /* Excessive Length Error */ +#define AT91_EMAC_RJB 0x7c /* Receive Jabber */ +#define AT91_EMAC_USF 0x80 /* Undersize Frame */ +#define AT91_EMAC_SQEE 0x84 /* SQE Test Error */ + +/* + * Address Registers. + */ +#define AT91_EMAC_HSL 0x90 /* Hash Address Low [31:0] */ +#define AT91_EMAC_HSH 0x94 /* Hash Address High [63:32] */ +#define AT91_EMAC_SA1L 0x98 /* Specific Address 1 Low, bytes 0-3 */ +#define AT91_EMAC_SA1H 0x9c /* Specific Address 1 High, bytes 4-5 */ +#define AT91_EMAC_SA2L 0xa0 /* Specific Address 2 Low, bytes 0-3 */ +#define AT91_EMAC_SA2H 0xa4 /* Specific Address 2 High, bytes 4-5 */ +#define AT91_EMAC_SA3L 0xa8 /* Specific Address 3 Low, bytes 0-3 */ +#define AT91_EMAC_SA3H 0xac /* Specific Address 3 High, bytes 4-5 */ +#define AT91_EMAC_SA4L 0xb0 /* Specific Address 4 Low, bytes 0-3 */ +#define AT91_EMAC_SA4H 0xb4 /* Specific Address 4 High, bytes 4-5 */ + +#endif diff --git a/arch/arm/mach-at91/include/mach/at91rm9200_mc.h b/arch/arm/mach-at91/include/mach/at91rm9200_mc.h new file mode 100644 index 00000000000..d34e4ed8934 --- /dev/null +++ b/arch/arm/mach-at91/include/mach/at91rm9200_mc.h @@ -0,0 +1,160 @@ +/* + * arch/arm/mach-at91/include/mach/at91rm9200_mc.h + * + * Copyright (C) 2005 Ivan Kokshaysky + * Copyright (C) SAN People + * + * Memory Controllers (MC, EBI, SMC, SDRAMC, BFC) - System peripherals registers. + * Based on AT91RM9200 datasheet revision E. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91RM9200_MC_H +#define AT91RM9200_MC_H + +/* Memory Controller */ +#define AT91_MC_RCR (AT91_MC + 0x00) /* MC Remap Control Register */ +#define AT91_MC_RCB (1 << 0) /* Remap Command Bit */ + +#define AT91_MC_ASR (AT91_MC + 0x04) /* MC Abort Status Register */ +#define AT91_MC_UNADD (1 << 0) /* Undefined Address Abort Status */ +#define AT91_MC_MISADD (1 << 1) /* Misaligned Address Abort Status */ +#define AT91_MC_ABTSZ (3 << 8) /* Abort Size Status */ +#define AT91_MC_ABTSZ_BYTE (0 << 8) +#define AT91_MC_ABTSZ_HALFWORD (1 << 8) +#define AT91_MC_ABTSZ_WORD (2 << 8) +#define AT91_MC_ABTTYP (3 << 10) /* Abort Type Status */ +#define AT91_MC_ABTTYP_DATAREAD (0 << 10) +#define AT91_MC_ABTTYP_DATAWRITE (1 << 10) +#define AT91_MC_ABTTYP_FETCH (2 << 10) +#define AT91_MC_MST0 (1 << 16) /* ARM920T Abort Source */ +#define AT91_MC_MST1 (1 << 17) /* PDC Abort Source */ +#define AT91_MC_MST2 (1 << 18) /* UHP Abort Source */ +#define AT91_MC_MST3 (1 << 19) /* EMAC Abort Source */ +#define AT91_MC_SVMST0 (1 << 24) /* Saved ARM920T Abort Source */ +#define AT91_MC_SVMST1 (1 << 25) /* Saved PDC Abort Source */ +#define AT91_MC_SVMST2 (1 << 26) /* Saved UHP Abort Source */ +#define AT91_MC_SVMST3 (1 << 27) /* Saved EMAC Abort Source */ + +#define AT91_MC_AASR (AT91_MC + 0x08) /* MC Abort Address Status Register */ + +#define AT91_MC_MPR (AT91_MC + 0x0c) /* MC Master Priority Register */ +#define AT91_MPR_MSTP0 (7 << 0) /* ARM920T Priority */ +#define AT91_MPR_MSTP1 (7 << 4) /* PDC Priority */ +#define AT91_MPR_MSTP2 (7 << 8) /* UHP Priority */ +#define AT91_MPR_MSTP3 (7 << 12) /* EMAC Priority */ + +/* External Bus Interface (EBI) registers */ +#define AT91_EBI_CSA (AT91_MC + 0x60) /* Chip Select Assignment Register */ +#define AT91_EBI_CS0A (1 << 0) /* Chip Select 0 Assignment */ +#define AT91_EBI_CS0A_SMC (0 << 0) +#define AT91_EBI_CS0A_BFC (1 << 0) +#define AT91_EBI_CS1A (1 << 1) /* Chip Select 1 Assignment */ +#define AT91_EBI_CS1A_SMC (0 << 1) +#define AT91_EBI_CS1A_SDRAMC (1 << 1) +#define AT91_EBI_CS3A (1 << 3) /* Chip Select 2 Assignment */ +#define AT91_EBI_CS3A_SMC (0 << 3) +#define AT91_EBI_CS3A_SMC_SMARTMEDIA (1 << 3) +#define AT91_EBI_CS4A (1 << 4) /* Chip Select 3 Assignment */ +#define AT91_EBI_CS4A_SMC (0 << 4) +#define AT91_EBI_CS4A_SMC_COMPACTFLASH (1 << 4) +#define AT91_EBI_CFGR (AT91_MC + 0x64) /* Configuration Register */ +#define AT91_EBI_DBPUC (1 << 0) /* Data Bus Pull-Up Configuration */ + +/* Static Memory Controller (SMC) registers */ +#define AT91_SMC_CSR(n) (AT91_MC + 0x70 + ((n) * 4))/* SMC Chip Select Register */ +#define AT91_SMC_NWS (0x7f << 0) /* Number of Wait States */ +#define AT91_SMC_NWS_(x) ((x) << 0) +#define AT91_SMC_WSEN (1 << 7) /* Wait State Enable */ +#define AT91_SMC_TDF (0xf << 8) /* Data Float Time */ +#define AT91_SMC_TDF_(x) ((x) << 8) +#define AT91_SMC_BAT (1 << 12) /* Byte Access Type */ +#define AT91_SMC_DBW (3 << 13) /* Data Bus Width */ +#define AT91_SMC_DBW_16 (1 << 13) +#define AT91_SMC_DBW_8 (2 << 13) +#define AT91_SMC_DPR (1 << 15) /* Data Read Protocol */ +#define AT91_SMC_ACSS (3 << 16) /* Address to Chip Select Setup */ +#define AT91_SMC_ACSS_STD (0 << 16) +#define AT91_SMC_ACSS_1 (1 << 16) +#define AT91_SMC_ACSS_2 (2 << 16) +#define AT91_SMC_ACSS_3 (3 << 16) +#define AT91_SMC_RWSETUP (7 << 24) /* Read & Write Signal Time Setup */ +#define AT91_SMC_RWSETUP_(x) ((x) << 24) +#define AT91_SMC_RWHOLD (7 << 28) /* Read & Write Signal Hold Time */ +#define AT91_SMC_RWHOLD_(x) ((x) << 28) + +/* SDRAM Controller registers */ +#define AT91_SDRAMC_MR (AT91_MC + 0x90) /* Mode Register */ +#define AT91_SDRAMC_MODE (0xf << 0) /* Command Mode */ +#define AT91_SDRAMC_MODE_NORMAL (0 << 0) +#define AT91_SDRAMC_MODE_NOP (1 << 0) +#define AT91_SDRAMC_MODE_PRECHARGE (2 << 0) +#define AT91_SDRAMC_MODE_LMR (3 << 0) +#define AT91_SDRAMC_MODE_REFRESH (4 << 0) +#define AT91_SDRAMC_DBW (1 << 4) /* Data Bus Width */ +#define AT91_SDRAMC_DBW_32 (0 << 4) +#define AT91_SDRAMC_DBW_16 (1 << 4) + +#define AT91_SDRAMC_TR (AT91_MC + 0x94) /* Refresh Timer Register */ +#define AT91_SDRAMC_COUNT (0xfff << 0) /* Refresh Timer Count */ + +#define AT91_SDRAMC_CR (AT91_MC + 0x98) /* Configuration Register */ +#define AT91_SDRAMC_NC (3 << 0) /* Number of Column Bits */ +#define AT91_SDRAMC_NC_8 (0 << 0) +#define AT91_SDRAMC_NC_9 (1 << 0) +#define AT91_SDRAMC_NC_10 (2 << 0) +#define AT91_SDRAMC_NC_11 (3 << 0) +#define AT91_SDRAMC_NR (3 << 2) /* Number of Row Bits */ +#define AT91_SDRAMC_NR_11 (0 << 2) +#define AT91_SDRAMC_NR_12 (1 << 2) +#define AT91_SDRAMC_NR_13 (2 << 2) +#define AT91_SDRAMC_NB (1 << 4) /* Number of Banks */ +#define AT91_SDRAMC_NB_2 (0 << 4) +#define AT91_SDRAMC_NB_4 (1 << 4) +#define AT91_SDRAMC_CAS (3 << 5) /* CAS Latency */ +#define AT91_SDRAMC_CAS_2 (2 << 5) +#define AT91_SDRAMC_TWR (0xf << 7) /* Write Recovery Delay */ +#define AT91_SDRAMC_TRC (0xf << 11) /* Row Cycle Delay */ +#define AT91_SDRAMC_TRP (0xf << 15) /* Row Precharge Delay */ +#define AT91_SDRAMC_TRCD (0xf << 19) /* Row to Column Delay */ +#define AT91_SDRAMC_TRAS (0xf << 23) /* Active to Precharge Delay */ +#define AT91_SDRAMC_TXSR (0xf << 27) /* Exit Self Refresh to Active Delay */ + +#define AT91_SDRAMC_SRR (AT91_MC + 0x9c) /* Self Refresh Register */ +#define AT91_SDRAMC_LPR (AT91_MC + 0xa0) /* Low Power Register */ +#define AT91_SDRAMC_IER (AT91_MC + 0xa4) /* Interrupt Enable Register */ +#define AT91_SDRAMC_IDR (AT91_MC + 0xa8) /* Interrupt Disable Register */ +#define AT91_SDRAMC_IMR (AT91_MC + 0xac) /* Interrupt Mask Register */ +#define AT91_SDRAMC_ISR (AT91_MC + 0xb0) /* Interrupt Status Register */ + +/* Burst Flash Controller register */ +#define AT91_BFC_MR (AT91_MC + 0xc0) /* Mode Register */ +#define AT91_BFC_BFCOM (3 << 0) /* Burst Flash Controller Operating Mode */ +#define AT91_BFC_BFCOM_DISABLED (0 << 0) +#define AT91_BFC_BFCOM_ASYNC (1 << 0) +#define AT91_BFC_BFCOM_BURST (2 << 0) +#define AT91_BFC_BFCC (3 << 2) /* Burst Flash Controller Clock */ +#define AT91_BFC_BFCC_MCK (1 << 2) +#define AT91_BFC_BFCC_DIV2 (2 << 2) +#define AT91_BFC_BFCC_DIV4 (3 << 2) +#define AT91_BFC_AVL (0xf << 4) /* Address Valid Latency */ +#define AT91_BFC_PAGES (7 << 8) /* Page Size */ +#define AT91_BFC_PAGES_NO_PAGE (0 << 8) +#define AT91_BFC_PAGES_16 (1 << 8) +#define AT91_BFC_PAGES_32 (2 << 8) +#define AT91_BFC_PAGES_64 (3 << 8) +#define AT91_BFC_PAGES_128 (4 << 8) +#define AT91_BFC_PAGES_256 (5 << 8) +#define AT91_BFC_PAGES_512 (6 << 8) +#define AT91_BFC_PAGES_1024 (7 << 8) +#define AT91_BFC_OEL (3 << 12) /* Output Enable Latency */ +#define AT91_BFC_BAAEN (1 << 16) /* Burst Address Advance Enable */ +#define AT91_BFC_BFOEH (1 << 17) /* Burst Flash Output Enable Handling */ +#define AT91_BFC_MUXEN (1 << 18) /* Multiplexed Bus Enable */ +#define AT91_BFC_RDYEN (1 << 19) /* Ready Enable Mode */ + +#endif diff --git a/arch/arm/mach-at91/include/mach/at91sam9260.h b/arch/arm/mach-at91/include/mach/at91sam9260.h new file mode 100644 index 00000000000..43c396b9b4c --- /dev/null +++ b/arch/arm/mach-at91/include/mach/at91sam9260.h @@ -0,0 +1,138 @@ +/* + * arch/arm/mach-at91/include/mach/at91sam9260.h + * + * (C) 2006 Andrew Victor + * + * Common definitions. + * Based on AT91SAM9260 datasheet revision A (Preliminary). + * + * Includes also definitions for AT91SAM9XE and AT91SAM9G families + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91SAM9260_H +#define AT91SAM9260_H + +/* + * Peripheral identifiers/interrupts. + */ +#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ +#define AT91_ID_SYS 1 /* System Peripherals */ +#define AT91SAM9260_ID_PIOA 2 /* Parallel IO Controller A */ +#define AT91SAM9260_ID_PIOB 3 /* Parallel IO Controller B */ +#define AT91SAM9260_ID_PIOC 4 /* Parallel IO Controller C */ +#define AT91SAM9260_ID_ADC 5 /* Analog-to-Digital Converter */ +#define AT91SAM9260_ID_US0 6 /* USART 0 */ +#define AT91SAM9260_ID_US1 7 /* USART 1 */ +#define AT91SAM9260_ID_US2 8 /* USART 2 */ +#define AT91SAM9260_ID_MCI 9 /* Multimedia Card Interface */ +#define AT91SAM9260_ID_UDP 10 /* USB Device Port */ +#define AT91SAM9260_ID_TWI 11 /* Two-Wire Interface */ +#define AT91SAM9260_ID_SPI0 12 /* Serial Peripheral Interface 0 */ +#define AT91SAM9260_ID_SPI1 13 /* Serial Peripheral Interface 1 */ +#define AT91SAM9260_ID_SSC 14 /* Serial Synchronous Controller */ +#define AT91SAM9260_ID_TC0 17 /* Timer Counter 0 */ +#define AT91SAM9260_ID_TC1 18 /* Timer Counter 1 */ +#define AT91SAM9260_ID_TC2 19 /* Timer Counter 2 */ +#define AT91SAM9260_ID_UHP 20 /* USB Host port */ +#define AT91SAM9260_ID_EMAC 21 /* Ethernet */ +#define AT91SAM9260_ID_ISI 22 /* Image Sensor Interface */ +#define AT91SAM9260_ID_US3 23 /* USART 3 */ +#define AT91SAM9260_ID_US4 24 /* USART 4 */ +#define AT91SAM9260_ID_US5 25 /* USART 5 */ +#define AT91SAM9260_ID_TC3 26 /* Timer Counter 3 */ +#define AT91SAM9260_ID_TC4 27 /* Timer Counter 4 */ +#define AT91SAM9260_ID_TC5 28 /* Timer Counter 5 */ +#define AT91SAM9260_ID_IRQ0 29 /* Advanced Interrupt Controller (IRQ0) */ +#define AT91SAM9260_ID_IRQ1 30 /* Advanced Interrupt Controller (IRQ1) */ +#define AT91SAM9260_ID_IRQ2 31 /* Advanced Interrupt Controller (IRQ2) */ + + +/* + * User Peripheral physical base addresses. + */ +#define AT91SAM9260_BASE_TCB0 0xfffa0000 +#define AT91SAM9260_BASE_TC0 0xfffa0000 +#define AT91SAM9260_BASE_TC1 0xfffa0040 +#define AT91SAM9260_BASE_TC2 0xfffa0080 +#define AT91SAM9260_BASE_UDP 0xfffa4000 +#define AT91SAM9260_BASE_MCI 0xfffa8000 +#define AT91SAM9260_BASE_TWI 0xfffac000 +#define AT91SAM9260_BASE_US0 0xfffb0000 +#define AT91SAM9260_BASE_US1 0xfffb4000 +#define AT91SAM9260_BASE_US2 0xfffb8000 +#define AT91SAM9260_BASE_SSC 0xfffbc000 +#define AT91SAM9260_BASE_ISI 0xfffc0000 +#define AT91SAM9260_BASE_EMAC 0xfffc4000 +#define AT91SAM9260_BASE_SPI0 0xfffc8000 +#define AT91SAM9260_BASE_SPI1 0xfffcc000 +#define AT91SAM9260_BASE_US3 0xfffd0000 +#define AT91SAM9260_BASE_US4 0xfffd4000 +#define AT91SAM9260_BASE_US5 0xfffd8000 +#define AT91SAM9260_BASE_TCB1 0xfffdc000 +#define AT91SAM9260_BASE_TC3 0xfffdc000 +#define AT91SAM9260_BASE_TC4 0xfffdc040 +#define AT91SAM9260_BASE_TC5 0xfffdc080 +#define AT91SAM9260_BASE_ADC 0xfffe0000 +#define AT91_BASE_SYS 0xffffe800 + +/* + * System Peripherals (offset from AT91_BASE_SYS) + */ +#define AT91_ECC (0xffffe800 - AT91_BASE_SYS) +#define AT91_SDRAMC (0xffffea00 - AT91_BASE_SYS) +#define AT91_SMC (0xffffec00 - AT91_BASE_SYS) +#define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS) +#define AT91_CCFG (0xffffef10 - AT91_BASE_SYS) +#define AT91_AIC (0xfffff000 - AT91_BASE_SYS) +#define AT91_DBGU (0xfffff200 - AT91_BASE_SYS) +#define AT91_PIOA (0xfffff400 - AT91_BASE_SYS) +#define AT91_PIOB (0xfffff600 - AT91_BASE_SYS) +#define AT91_PIOC (0xfffff800 - AT91_BASE_SYS) +#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) +#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS) +#define AT91_SHDWC (0xfffffd10 - AT91_BASE_SYS) +#define AT91_RTT (0xfffffd20 - AT91_BASE_SYS) +#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS) +#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS) +#define AT91_GPBR (0xfffffd50 - AT91_BASE_SYS) + +#define AT91_USART0 AT91SAM9260_BASE_US0 +#define AT91_USART1 AT91SAM9260_BASE_US1 +#define AT91_USART2 AT91SAM9260_BASE_US2 +#define AT91_USART3 AT91SAM9260_BASE_US3 +#define AT91_USART4 AT91SAM9260_BASE_US4 +#define AT91_USART5 AT91SAM9260_BASE_US5 + + +/* + * Internal Memory. + */ +#define AT91SAM9260_ROM_BASE 0x00100000 /* Internal ROM base address */ +#define AT91SAM9260_ROM_SIZE SZ_32K /* Internal ROM size (32Kb) */ + +#define AT91SAM9260_SRAM0_BASE 0x00200000 /* Internal SRAM 0 base address */ +#define AT91SAM9260_SRAM0_SIZE SZ_4K /* Internal SRAM 0 size (4Kb) */ +#define AT91SAM9260_SRAM1_BASE 0x00300000 /* Internal SRAM 1 base address */ +#define AT91SAM9260_SRAM1_SIZE SZ_4K /* Internal SRAM 1 size (4Kb) */ + +#define AT91SAM9260_UHP_BASE 0x00500000 /* USB Host controller */ + +#define AT91SAM9XE_FLASH_BASE 0x00200000 /* Internal FLASH base address */ +#define AT91SAM9XE_SRAM_BASE 0x00300000 /* Internal SRAM base address */ + +#define AT91SAM9G20_ROM_BASE 0x00100000 /* Internal ROM base address */ +#define AT91SAM9G20_ROM_SIZE SZ_32K /* Internal ROM size (32Kb) */ + +#define AT91SAM9G20_SRAM0_BASE 0x00200000 /* Internal SRAM 0 base address */ +#define AT91SAM9G20_SRAM0_SIZE SZ_16K /* Internal SRAM 0 size (16Kb) */ +#define AT91SAM9G20_SRAM1_BASE 0x00300000 /* Internal SRAM 1 base address */ +#define AT91SAM9G20_SRAM1_SIZE SZ_16K /* Internal SRAM 1 size (16Kb) */ + +#define AT91SAM9G20_UHP_BASE 0x00500000 /* USB Host controller */ + +#endif diff --git a/arch/arm/mach-at91/include/mach/at91sam9260_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9260_matrix.h new file mode 100644 index 00000000000..f027de5df95 --- /dev/null +++ b/arch/arm/mach-at91/include/mach/at91sam9260_matrix.h @@ -0,0 +1,78 @@ +/* + * arch/arm/mach-at91/include/mach/at91sam9260_matrix.h + * + * Memory Controllers (MATRIX, EBI) - System peripherals registers. + * Based on AT91SAM9260 datasheet revision B. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91SAM9260_MATRIX_H +#define AT91SAM9260_MATRIX_H + +#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */ +#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */ +#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */ +#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */ +#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */ +#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */ +#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */ +#define AT91_MATRIX_ULBT_INFINITE (0 << 0) +#define AT91_MATRIX_ULBT_SINGLE (1 << 0) +#define AT91_MATRIX_ULBT_FOUR (2 << 0) +#define AT91_MATRIX_ULBT_EIGHT (3 << 0) +#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0) + +#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */ +#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */ +#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */ +#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */ +#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */ +#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */ +#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */ +#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16) +#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16) +#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16) +#define AT91_MATRIX_FIXED_DEFMSTR (7 << 18) /* Fixed Index of Default Master */ +#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */ +#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24) +#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24) + +#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */ +#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */ +#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */ +#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */ +#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */ +#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */ +#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */ +#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */ +#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */ +#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */ +#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */ + +#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */ +#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */ +#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */ + +#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x11C) /* EBI Chip Select Assignment Register */ +#define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */ +#define AT91_MATRIX_CS1A_SMC (0 << 1) +#define AT91_MATRIX_CS1A_SDRAMC (1 << 1) +#define AT91_MATRIX_CS3A (1 << 3) /* Chip Select 3 Assignment */ +#define AT91_MATRIX_CS3A_SMC (0 << 3) +#define AT91_MATRIX_CS3A_SMC_SMARTMEDIA (1 << 3) +#define AT91_MATRIX_CS4A (1 << 4) /* Chip Select 4 Assignment */ +#define AT91_MATRIX_CS4A_SMC (0 << 4) +#define AT91_MATRIX_CS4A_SMC_CF1 (1 << 4) +#define AT91_MATRIX_CS5A (1 << 5) /* Chip Select 5 Assignment */ +#define AT91_MATRIX_CS5A_SMC (0 << 5) +#define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5) +#define AT91_MATRIX_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */ +#define AT91_MATRIX_VDDIOMSEL (1 << 16) /* Memory voltage selection */ +#define AT91_MATRIX_VDDIOMSEL_1_8V (0 << 16) +#define AT91_MATRIX_VDDIOMSEL_3_3V (1 << 16) + +#endif diff --git a/arch/arm/mach-at91/include/mach/at91sam9261.h b/arch/arm/mach-at91/include/mach/at91sam9261.h new file mode 100644 index 00000000000..3a348ca2077 --- /dev/null +++ b/arch/arm/mach-at91/include/mach/at91sam9261.h @@ -0,0 +1,105 @@ +/* + * arch/arm/mach-at91/include/mach/at91sam9261.h + * + * Copyright (C) SAN People + * + * Common definitions. + * Based on AT91SAM9261 datasheet revision E. (Preliminary) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91SAM9261_H +#define AT91SAM9261_H + +/* + * Peripheral identifiers/interrupts. + */ +#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ +#define AT91_ID_SYS 1 /* System Peripherals */ +#define AT91SAM9261_ID_PIOA 2 /* Parallel IO Controller A */ +#define AT91SAM9261_ID_PIOB 3 /* Parallel IO Controller B */ +#define AT91SAM9261_ID_PIOC 4 /* Parallel IO Controller C */ +#define AT91SAM9261_ID_US0 6 /* USART 0 */ +#define AT91SAM9261_ID_US1 7 /* USART 1 */ +#define AT91SAM9261_ID_US2 8 /* USART 2 */ +#define AT91SAM9261_ID_MCI 9 /* Multimedia Card Interface */ +#define AT91SAM9261_ID_UDP 10 /* USB Device Port */ +#define AT91SAM9261_ID_TWI 11 /* Two-Wire Interface */ +#define AT91SAM9261_ID_SPI0 12 /* Serial Peripheral Interface 0 */ +#define AT91SAM9261_ID_SPI1 13 /* Serial Peripheral Interface 1 */ +#define AT91SAM9261_ID_SSC0 14 /* Serial Synchronous Controller 0 */ +#define AT91SAM9261_ID_SSC1 15 /* Serial Synchronous Controller 1 */ +#define AT91SAM9261_ID_SSC2 16 /* Serial Synchronous Controller 2 */ +#define AT91SAM9261_ID_TC0 17 /* Timer Counter 0 */ +#define AT91SAM9261_ID_TC1 18 /* Timer Counter 1 */ +#define AT91SAM9261_ID_TC2 19 /* Timer Counter 2 */ +#define AT91SAM9261_ID_UHP 20 /* USB Host port */ +#define AT91SAM9261_ID_LCDC 21 /* LDC Controller */ +#define AT91SAM9261_ID_IRQ0 29 /* Advanced Interrupt Controller (IRQ0) */ +#define AT91SAM9261_ID_IRQ1 30 /* Advanced Interrupt Controller (IRQ1) */ +#define AT91SAM9261_ID_IRQ2 31 /* Advanced Interrupt Controller (IRQ2) */ + + +/* + * User Peripheral physical base addresses. + */ +#define AT91SAM9261_BASE_TCB0 0xfffa0000 +#define AT91SAM9261_BASE_TC0 0xfffa0000 +#define AT91SAM9261_BASE_TC1 0xfffa0040 +#define AT91SAM9261_BASE_TC2 0xfffa0080 +#define AT91SAM9261_BASE_UDP 0xfffa4000 +#define AT91SAM9261_BASE_MCI 0xfffa8000 +#define AT91SAM9261_BASE_TWI 0xfffac000 +#define AT91SAM9261_BASE_US0 0xfffb0000 +#define AT91SAM9261_BASE_US1 0xfffb4000 +#define AT91SAM9261_BASE_US2 0xfffb8000 +#define AT91SAM9261_BASE_SSC0 0xfffbc000 +#define AT91SAM9261_BASE_SSC1 0xfffc0000 +#define AT91SAM9261_BASE_SSC2 0xfffc4000 +#define AT91SAM9261_BASE_SPI0 0xfffc8000 +#define AT91SAM9261_BASE_SPI1 0xfffcc000 +#define AT91_BASE_SYS 0xffffea00 + + +/* + * System Peripherals (offset from AT91_BASE_SYS) + */ +#define AT91_SDRAMC (0xffffea00 - AT91_BASE_SYS) +#define AT91_SMC (0xffffec00 - AT91_BASE_SYS) +#define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS) +#define AT91_AIC (0xfffff000 - AT91_BASE_SYS) +#define AT91_DBGU (0xfffff200 - AT91_BASE_SYS) +#define AT91_PIOA (0xfffff400 - AT91_BASE_SYS) +#define AT91_PIOB (0xfffff600 - AT91_BASE_SYS) +#define AT91_PIOC (0xfffff800 - AT91_BASE_SYS) +#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) +#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS) +#define AT91_SHDWC (0xfffffd10 - AT91_BASE_SYS) +#define AT91_RTT (0xfffffd20 - AT91_BASE_SYS) +#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS) +#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS) +#define AT91_GPBR (0xfffffd50 - AT91_BASE_SYS) + +#define AT91_USART0 AT91SAM9261_BASE_US0 +#define AT91_USART1 AT91SAM9261_BASE_US1 +#define AT91_USART2 AT91SAM9261_BASE_US2 + + +/* + * Internal Memory. + */ +#define AT91SAM9261_SRAM_BASE 0x00300000 /* Internal SRAM base address */ +#define AT91SAM9261_SRAM_SIZE 0x00028000 /* Internal SRAM size (160Kb) */ + +#define AT91SAM9261_ROM_BASE 0x00400000 /* Internal ROM base address */ +#define AT91SAM9261_ROM_SIZE SZ_32K /* Internal ROM size (32Kb) */ + +#define AT91SAM9261_UHP_BASE 0x00500000 /* USB Host controller */ +#define AT91SAM9261_LCDC_BASE 0x00600000 /* LDC controller */ + + +#endif diff --git a/arch/arm/mach-at91/include/mach/at91sam9261_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9261_matrix.h new file mode 100644 index 00000000000..db62b1f1830 --- /dev/null +++ b/arch/arm/mach-at91/include/mach/at91sam9261_matrix.h @@ -0,0 +1,62 @@ +/* + * arch/arm/mach-at91/include/mach/at91sam9261_matrix.h + * + * Memory Controllers (MATRIX, EBI) - System peripherals registers. + * Based on AT91SAM9261 datasheet revision D. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91SAM9261_MATRIX_H +#define AT91SAM9261_MATRIX_H + +#define AT91_MATRIX_MCFG (AT91_MATRIX + 0x00) /* Master Configuration Register */ +#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */ +#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */ + +#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x04) /* Slave Configuration Register 0 */ +#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x08) /* Slave Configuration Register 1 */ +#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x0C) /* Slave Configuration Register 2 */ +#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x10) /* Slave Configuration Register 3 */ +#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x14) /* Slave Configuration Register 4 */ +#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */ +#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */ +#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16) +#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16) +#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16) +#define AT91_MATRIX_FIXED_DEFMSTR (7 << 18) /* Fixed Index of Default Master */ + +#define AT91_MATRIX_TCR (AT91_MATRIX + 0x24) /* TCM Configuration Register */ +#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */ +#define AT91_MATRIX_ITCM_0 (0 << 0) +#define AT91_MATRIX_ITCM_16 (5 << 0) +#define AT91_MATRIX_ITCM_32 (6 << 0) +#define AT91_MATRIX_ITCM_64 (7 << 0) +#define AT91_MATRIX_DTCM_SIZE (0xf << 4) /* Size of DTCM enabled memory block */ +#define AT91_MATRIX_DTCM_0 (0 << 4) +#define AT91_MATRIX_DTCM_16 (5 << 4) +#define AT91_MATRIX_DTCM_32 (6 << 4) +#define AT91_MATRIX_DTCM_64 (7 << 4) + +#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x30) /* EBI Chip Select Assignment Register */ +#define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */ +#define AT91_MATRIX_CS1A_SMC (0 << 1) +#define AT91_MATRIX_CS1A_SDRAMC (1 << 1) +#define AT91_MATRIX_CS3A (1 << 3) /* Chip Select 3 Assignment */ +#define AT91_MATRIX_CS3A_SMC (0 << 3) +#define AT91_MATRIX_CS3A_SMC_SMARTMEDIA (1 << 3) +#define AT91_MATRIX_CS4A (1 << 4) /* Chip Select 4 Assignment */ +#define AT91_MATRIX_CS4A_SMC (0 << 4) +#define AT91_MATRIX_CS4A_SMC_CF1 (1 << 4) +#define AT91_MATRIX_CS5A (1 << 5) /* Chip Select 5 Assignment */ +#define AT91_MATRIX_CS5A_SMC (0 << 5) +#define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5) +#define AT91_MATRIX_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */ + +#define AT91_MATRIX_USBPUCR (AT91_MATRIX + 0x34) /* USB Pad Pull-Up Control Register */ +#define AT91_MATRIX_USBPUCR_PUON (1 << 30) /* USB Device PAD Pull-up Enable */ + +#endif diff --git a/arch/arm/mach-at91/include/mach/at91sam9263.h b/arch/arm/mach-at91/include/mach/at91sam9263.h new file mode 100644 index 00000000000..2091f1e42d4 --- /dev/null +++ b/arch/arm/mach-at91/include/mach/at91sam9263.h @@ -0,0 +1,127 @@ +/* + * arch/arm/mach-at91/include/mach/at91sam9263.h + * + * (C) 2007 Atmel Corporation. + * + * Common definitions. + * Based on AT91SAM9263 datasheet revision B (Preliminary). + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91SAM9263_H +#define AT91SAM9263_H + +/* + * Peripheral identifiers/interrupts. + */ +#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ +#define AT91_ID_SYS 1 /* System Peripherals */ +#define AT91SAM9263_ID_PIOA 2 /* Parallel IO Controller A */ +#define AT91SAM9263_ID_PIOB 3 /* Parallel IO Controller B */ +#define AT91SAM9263_ID_PIOCDE 4 /* Parallel IO Controller C, D and E */ +#define AT91SAM9263_ID_US0 7 /* USART 0 */ +#define AT91SAM9263_ID_US1 8 /* USART 1 */ +#define AT91SAM9263_ID_US2 9 /* USART 2 */ +#define AT91SAM9263_ID_MCI0 10 /* Multimedia Card Interface 0 */ +#define AT91SAM9263_ID_MCI1 11 /* Multimedia Card Interface 1 */ +#define AT91SAM9263_ID_CAN 12 /* CAN */ +#define AT91SAM9263_ID_TWI 13 /* Two-Wire Interface */ +#define AT91SAM9263_ID_SPI0 14 /* Serial Peripheral Interface 0 */ +#define AT91SAM9263_ID_SPI1 15 /* Serial Peripheral Interface 1 */ +#define AT91SAM9263_ID_SSC0 16 /* Serial Synchronous Controller 0 */ +#define AT91SAM9263_ID_SSC1 17 /* Serial Synchronous Controller 1 */ +#define AT91SAM9263_ID_AC97C 18 /* AC97 Controller */ +#define AT91SAM9263_ID_TCB 19 /* Timer Counter 0, 1 and 2 */ +#define AT91SAM9263_ID_PWMC 20 /* Pulse Width Modulation Controller */ +#define AT91SAM9263_ID_EMAC 21 /* Ethernet */ +#define AT91SAM9263_ID_2DGE 23 /* 2D Graphic Engine */ +#define AT91SAM9263_ID_UDP 24 /* USB Device Port */ +#define AT91SAM9263_ID_ISI 25 /* Image Sensor Interface */ +#define AT91SAM9263_ID_LCDC 26 /* LCD Controller */ +#define AT91SAM9263_ID_DMA 27 /* DMA Controller */ +#define AT91SAM9263_ID_UHP 29 /* USB Host port */ +#define AT91SAM9263_ID_IRQ0 30 /* Advanced Interrupt Controller (IRQ0) */ +#define AT91SAM9263_ID_IRQ1 31 /* Advanced Interrupt Controller (IRQ1) */ + + +/* + * User Peripheral physical base addresses. + */ +#define AT91SAM9263_BASE_UDP 0xfff78000 +#define AT91SAM9263_BASE_TCB0 0xfff7c000 +#define AT91SAM9263_BASE_TC0 0xfff7c000 +#define AT91SAM9263_BASE_TC1 0xfff7c040 +#define AT91SAM9263_BASE_TC2 0xfff7c080 +#define AT91SAM9263_BASE_MCI0 0xfff80000 +#define AT91SAM9263_BASE_MCI1 0xfff84000 +#define AT91SAM9263_BASE_TWI 0xfff88000 +#define AT91SAM9263_BASE_US0 0xfff8c000 +#define AT91SAM9263_BASE_US1 0xfff90000 +#define AT91SAM9263_BASE_US2 0xfff94000 +#define AT91SAM9263_BASE_SSC0 0xfff98000 +#define AT91SAM9263_BASE_SSC1 0xfff9c000 +#define AT91SAM9263_BASE_AC97C 0xfffa0000 +#define AT91SAM9263_BASE_SPI0 0xfffa4000 +#define AT91SAM9263_BASE_SPI1 0xfffa8000 +#define AT91SAM9263_BASE_CAN 0xfffac000 +#define AT91SAM9263_BASE_PWMC 0xfffb8000 +#define AT91SAM9263_BASE_EMAC 0xfffbc000 +#define AT91SAM9263_BASE_ISI 0xfffc4000 +#define AT91SAM9263_BASE_2DGE 0xfffc8000 +#define AT91_BASE_SYS 0xffffe000 + +/* + * System Peripherals (offset from AT91_BASE_SYS) + */ +#define AT91_ECC0 (0xffffe000 - AT91_BASE_SYS) +#define AT91_SDRAMC0 (0xffffe200 - AT91_BASE_SYS) +#define AT91_SMC0 (0xffffe400 - AT91_BASE_SYS) +#define AT91_ECC1 (0xffffe600 - AT91_BASE_SYS) +#define AT91_SDRAMC1 (0xffffe800 - AT91_BASE_SYS) +#define AT91_SMC1 (0xffffea00 - AT91_BASE_SYS) +#define AT91_MATRIX (0xffffec00 - AT91_BASE_SYS) +#define AT91_CCFG (0xffffed10 - AT91_BASE_SYS) +#define AT91_DBGU (0xffffee00 - AT91_BASE_SYS) +#define AT91_AIC (0xfffff000 - AT91_BASE_SYS) +#define AT91_PIOA (0xfffff200 - AT91_BASE_SYS) +#define AT91_PIOB (0xfffff400 - AT91_BASE_SYS) +#define AT91_PIOC (0xfffff600 - AT91_BASE_SYS) +#define AT91_PIOD (0xfffff800 - AT91_BASE_SYS) +#define AT91_PIOE (0xfffffa00 - AT91_BASE_SYS) +#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) +#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS) +#define AT91_SHDWC (0xfffffd10 - AT91_BASE_SYS) +#define AT91_RTT0 (0xfffffd20 - AT91_BASE_SYS) +#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS) +#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS) +#define AT91_RTT1 (0xfffffd50 - AT91_BASE_SYS) +#define AT91_GPBR (0xfffffd60 - AT91_BASE_SYS) + +#define AT91_USART0 AT91SAM9263_BASE_US0 +#define AT91_USART1 AT91SAM9263_BASE_US1 +#define AT91_USART2 AT91SAM9263_BASE_US2 + +#define AT91_SMC AT91_SMC0 + +/* + * Internal Memory. + */ +#define AT91SAM9263_SRAM0_BASE 0x00300000 /* Internal SRAM 0 base address */ +#define AT91SAM9263_SRAM0_SIZE (80 * SZ_1K) /* Internal SRAM 0 size (80Kb) */ + +#define AT91SAM9263_ROM_BASE 0x00400000 /* Internal ROM base address */ +#define AT91SAM9263_ROM_SIZE SZ_128K /* Internal ROM size (128Kb) */ + +#define AT91SAM9263_SRAM1_BASE 0x00500000 /* Internal SRAM 1 base address */ +#define AT91SAM9263_SRAM1_SIZE SZ_16K /* Internal SRAM 1 size (16Kb) */ + +#define AT91SAM9263_LCDC_BASE 0x00700000 /* LCD Controller */ +#define AT91SAM9263_DMAC_BASE 0x00800000 /* DMA Controller */ +#define AT91SAM9263_UHP_BASE 0x00a00000 /* USB Host controller */ + + +#endif diff --git a/arch/arm/mach-at91/include/mach/at91sam9263_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9263_matrix.h new file mode 100644 index 00000000000..9b3efd3eb2f --- /dev/null +++ b/arch/arm/mach-at91/include/mach/at91sam9263_matrix.h @@ -0,0 +1,129 @@ +/* + * arch/arm/mach-at91/include/mach/at91sam9263_matrix.h + * + * Copyright (C) 2006 Atmel Corporation. + * + * Memory Controllers (MATRIX, EBI) - System peripherals registers. + * Based on AT91SAM9263 datasheet revision B (Preliminary). + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91SAM9263_MATRIX_H +#define AT91SAM9263_MATRIX_H + +#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */ +#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */ +#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */ +#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */ +#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */ +#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */ +#define AT91_MATRIX_MCFG6 (AT91_MATRIX + 0x18) /* Master Configuration Register 6 */ +#define AT91_MATRIX_MCFG7 (AT91_MATRIX + 0x1C) /* Master Configuration Register 7 */ +#define AT91_MATRIX_MCFG8 (AT91_MATRIX + 0x20) /* Master Configuration Register 8 */ +#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */ +#define AT91_MATRIX_ULBT_INFINITE (0 << 0) +#define AT91_MATRIX_ULBT_SINGLE (1 << 0) +#define AT91_MATRIX_ULBT_FOUR (2 << 0) +#define AT91_MATRIX_ULBT_EIGHT (3 << 0) +#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0) + +#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */ +#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */ +#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */ +#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */ +#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */ +#define AT91_MATRIX_SCFG5 (AT91_MATRIX + 0x54) /* Slave Configuration Register 5 */ +#define AT91_MATRIX_SCFG6 (AT91_MATRIX + 0x58) /* Slave Configuration Register 6 */ +#define AT91_MATRIX_SCFG7 (AT91_MATRIX + 0x5C) /* Slave Configuration Register 7 */ +#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */ +#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */ +#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16) +#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16) +#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16) +#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */ +#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */ +#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24) +#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24) + +#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */ +#define AT91_MATRIX_PRBS0 (AT91_MATRIX + 0x84) /* Priority Register B for Slave 0 */ +#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */ +#define AT91_MATRIX_PRBS1 (AT91_MATRIX + 0x8C) /* Priority Register B for Slave 1 */ +#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */ +#define AT91_MATRIX_PRBS2 (AT91_MATRIX + 0x94) /* Priority Register B for Slave 2 */ +#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */ +#define AT91_MATRIX_PRBS3 (AT91_MATRIX + 0x9C) /* Priority Register B for Slave 3 */ +#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */ +#define AT91_MATRIX_PRBS4 (AT91_MATRIX + 0xA4) /* Priority Register B for Slave 4 */ +#define AT91_MATRIX_PRAS5 (AT91_MATRIX + 0xA8) /* Priority Register A for Slave 5 */ +#define AT91_MATRIX_PRBS5 (AT91_MATRIX + 0xAC) /* Priority Register B for Slave 5 */ +#define AT91_MATRIX_PRAS6 (AT91_MATRIX + 0xB0) /* Priority Register A for Slave 6 */ +#define AT91_MATRIX_PRBS6 (AT91_MATRIX + 0xB4) /* Priority Register B for Slave 6 */ +#define AT91_MATRIX_PRAS7 (AT91_MATRIX + 0xB8) /* Priority Register A for Slave 7 */ +#define AT91_MATRIX_PRBS7 (AT91_MATRIX + 0xBC) /* Priority Register B for Slave 7 */ +#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */ +#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */ +#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */ +#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */ +#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */ +#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */ +#define AT91_MATRIX_M6PR (3 << 24) /* Master 6 Priority */ +#define AT91_MATRIX_M7PR (3 << 28) /* Master 7 Priority */ +#define AT91_MATRIX_M8PR (3 << 0) /* Master 8 Priority (in Register B) */ + +#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */ +#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */ +#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */ +#define AT91_MATRIX_RCB2 (1 << 2) +#define AT91_MATRIX_RCB3 (1 << 3) +#define AT91_MATRIX_RCB4 (1 << 4) +#define AT91_MATRIX_RCB5 (1 << 5) +#define AT91_MATRIX_RCB6 (1 << 6) +#define AT91_MATRIX_RCB7 (1 << 7) +#define AT91_MATRIX_RCB8 (1 << 8) + +#define AT91_MATRIX_TCMR (AT91_MATRIX + 0x114) /* TCM Configuration Register */ +#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */ +#define AT91_MATRIX_ITCM_0 (0 << 0) +#define AT91_MATRIX_ITCM_16 (5 << 0) +#define AT91_MATRIX_ITCM_32 (6 << 0) +#define AT91_MATRIX_DTCM_SIZE (0xf << 4) /* Size of DTCM enabled memory block */ +#define AT91_MATRIX_DTCM_0 (0 << 4) +#define AT91_MATRIX_DTCM_16 (5 << 4) +#define AT91_MATRIX_DTCM_32 (6 << 4) + +#define AT91_MATRIX_EBI0CSA (AT91_MATRIX + 0x120) /* EBI0 Chip Select Assignment Register */ +#define AT91_MATRIX_EBI0_CS1A (1 << 1) /* Chip Select 1 Assignment */ +#define AT91_MATRIX_EBI0_CS1A_SMC (0 << 1) +#define AT91_MATRIX_EBI0_CS1A_SDRAMC (1 << 1) +#define AT91_MATRIX_EBI0_CS3A (1 << 3) /* Chip Select 3 Assignment */ +#define AT91_MATRIX_EBI0_CS3A_SMC (0 << 3) +#define AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA (1 << 3) +#define AT91_MATRIX_EBI0_CS4A (1 << 4) /* Chip Select 4 Assignment */ +#define AT91_MATRIX_EBI0_CS4A_SMC (0 << 4) +#define AT91_MATRIX_EBI0_CS4A_SMC_CF1 (1 << 4) +#define AT91_MATRIX_EBI0_CS5A (1 << 5) /* Chip Select 5 Assignment */ +#define AT91_MATRIX_EBI0_CS5A_SMC (0 << 5) +#define AT91_MATRIX_EBI0_CS5A_SMC_CF2 (1 << 5) +#define AT91_MATRIX_EBI0_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */ +#define AT91_MATRIX_EBI0_VDDIOMSEL (1 << 16) /* Memory voltage selection */ +#define AT91_MATRIX_EBI0_VDDIOMSEL_1_8V (0 << 16) +#define AT91_MATRIX_EBI0_VDDIOMSEL_3_3V (1 << 16) + +#define AT91_MATRIX_EBI1CSA (AT91_MATRIX + 0x124) /* EBI1 Chip Select Assignment Register */ +#define AT91_MATRIX_EBI1_CS1A (1 << 1) /* Chip Select 1 Assignment */ +#define AT91_MATRIX_EBI1_CS1A_SMC (0 << 1) +#define AT91_MATRIX_EBI1_CS1A_SDRAMC (1 << 1) +#define AT91_MATRIX_EBI1_CS2A (1 << 3) /* Chip Select 3 Assignment */ +#define AT91_MATRIX_EBI1_CS2A_SMC (0 << 3) +#define AT91_MATRIX_EBI1_CS2A_SMC_SMARTMEDIA (1 << 3) +#define AT91_MATRIX_EBI1_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */ +#define AT91_MATRIX_EBI1_VDDIOMSEL (1 << 16) /* Memory voltage selection */ +#define AT91_MATRIX_EBI1_VDDIOMSEL_1_8V (0 << 16) +#define AT91_MATRIX_EBI1_VDDIOMSEL_3_3V (1 << 16) + +#endif diff --git a/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h b/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h new file mode 100644 index 00000000000..1921181c63c --- /dev/null +++ b/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h @@ -0,0 +1,83 @@ +/* + * arch/arm/mach-at91/include/mach/at91sam9_sdramc.h + * + * SDRAM Controllers (SDRAMC) - System peripherals registers. + * Based on AT91SAM9261 datasheet revision D. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91SAM9_SDRAMC_H +#define AT91SAM9_SDRAMC_H + +/* SDRAM Controller (SDRAMC) registers */ +#define AT91_SDRAMC_MR (AT91_SDRAMC + 0x00) /* SDRAM Controller Mode Register */ +#define AT91_SDRAMC_MODE (0xf << 0) /* Command Mode */ +#define AT91_SDRAMC_MODE_NORMAL 0 +#define AT91_SDRAMC_MODE_NOP 1 +#define AT91_SDRAMC_MODE_PRECHARGE 2 +#define AT91_SDRAMC_MODE_LMR 3 +#define AT91_SDRAMC_MODE_REFRESH 4 +#define AT91_SDRAMC_MODE_EXT_LMR 5 +#define AT91_SDRAMC_MODE_DEEP 6 + +#define AT91_SDRAMC_TR (AT91_SDRAMC + 0x04) /* SDRAM Controller Refresh Timer Register */ +#define AT91_SDRAMC_COUNT (0xfff << 0) /* Refresh Timer Counter */ + +#define AT91_SDRAMC_CR (AT91_SDRAMC + 0x08) /* SDRAM Controller Configuration Register */ +#define AT91_SDRAMC_NC (3 << 0) /* Number of Column Bits */ +#define AT91_SDRAMC_NC_8 (0 << 0) +#define AT91_SDRAMC_NC_9 (1 << 0) +#define AT91_SDRAMC_NC_10 (2 << 0) +#define AT91_SDRAMC_NC_11 (3 << 0) +#define AT91_SDRAMC_NR (3 << 2) /* Number of Row Bits */ +#define AT91_SDRAMC_NR_11 (0 << 2) +#define AT91_SDRAMC_NR_12 (1 << 2) +#define AT91_SDRAMC_NR_13 (2 << 2) +#define AT91_SDRAMC_NB (1 << 4) /* Number of Banks */ +#define AT91_SDRAMC_NB_2 (0 << 4) +#define AT91_SDRAMC_NB_4 (1 << 4) +#define AT91_SDRAMC_CAS (3 << 5) /* CAS Latency */ +#define AT91_SDRAMC_CAS_1 (1 << 5) +#define AT91_SDRAMC_CAS_2 (2 << 5) +#define AT91_SDRAMC_CAS_3 (3 << 5) +#define AT91_SDRAMC_DBW (1 << 7) /* Data Bus Width */ +#define AT91_SDRAMC_DBW_32 (0 << 7) +#define AT91_SDRAMC_DBW_16 (1 << 7) +#define AT91_SDRAMC_TWR (0xf << 8) /* Write Recovery Delay */ +#define AT91_SDRAMC_TRC (0xf << 12) /* Row Cycle Delay */ +#define AT91_SDRAMC_TRP (0xf << 16) /* Row Precharge Delay */ +#define AT91_SDRAMC_TRCD (0xf << 20) /* Row to Column Delay */ +#define AT91_SDRAMC_TRAS (0xf << 24) /* Active to Precharge Delay */ +#define AT91_SDRAMC_TXSR (0xf << 28) /* Exit Self Refresh to Active Delay */ + +#define AT91_SDRAMC_LPR (AT91_SDRAMC + 0x10) /* SDRAM Controller Low Power Register */ +#define AT91_SDRAMC_LPCB (3 << 0) /* Low-power Configurations */ +#define AT91_SDRAMC_LPCB_DISABLE 0 +#define AT91_SDRAMC_LPCB_SELF_REFRESH 1 +#define AT91_SDRAMC_LPCB_POWER_DOWN 2 +#define AT91_SDRAMC_LPCB_DEEP_POWER_DOWN 3 +#define AT91_SDRAMC_PASR (7 << 4) /* Partial Array Self Refresh */ +#define AT91_SDRAMC_TCSR (3 << 8) /* Temperature Compensated Self Refresh */ +#define AT91_SDRAMC_DS (3 << 10) /* Drive Strength */ +#define AT91_SDRAMC_TIMEOUT (3 << 12) /* Time to define when Low Power Mode is enabled */ +#define AT91_SDRAMC_TIMEOUT_0_CLK_CYCLES (0 << 12) +#define AT91_SDRAMC_TIMEOUT_64_CLK_CYCLES (1 << 12) +#define AT91_SDRAMC_TIMEOUT_128_CLK_CYCLES (2 << 12) + +#define AT91_SDRAMC_IER (AT91_SDRAMC + 0x14) /* SDRAM Controller Interrupt Enable Register */ +#define AT91_SDRAMC_IDR (AT91_SDRAMC + 0x18) /* SDRAM Controller Interrupt Disable Register */ +#define AT91_SDRAMC_IMR (AT91_SDRAMC + 0x1C) /* SDRAM Controller Interrupt Mask Register */ +#define AT91_SDRAMC_ISR (AT91_SDRAMC + 0x20) /* SDRAM Controller Interrupt Status Register */ +#define AT91_SDRAMC_RES (1 << 0) /* Refresh Error Status */ + +#define AT91_SDRAMC_MDR (AT91_SDRAMC + 0x24) /* SDRAM Memory Device Register */ +#define AT91_SDRAMC_MD (3 << 0) /* Memory Device Type */ +#define AT91_SDRAMC_MD_SDRAM 0 +#define AT91_SDRAMC_MD_LOW_POWER_SDRAM 1 + + +#endif diff --git a/arch/arm/mach-at91/include/mach/at91sam9_smc.h b/arch/arm/mach-at91/include/mach/at91sam9_smc.h new file mode 100644 index 00000000000..ec6ad1338b5 --- /dev/null +++ b/arch/arm/mach-at91/include/mach/at91sam9_smc.h @@ -0,0 +1,73 @@ +/* + * arch/arm/mach-at91/include/mach/at91sam9_smc.h + * + * Static Memory Controllers (SMC) - System peripherals registers. + * Based on AT91SAM9261 datasheet revision D. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91SAM9_SMC_H +#define AT91SAM9_SMC_H + +#define AT91_SMC_SETUP(n) (AT91_SMC + 0x00 + ((n)*0x10)) /* Setup Register for CS n */ +#define AT91_SMC_NWESETUP (0x3f << 0) /* NWE Setup Length */ +#define AT91_SMC_NWESETUP_(x) ((x) << 0) +#define AT91_SMC_NCS_WRSETUP (0x3f << 8) /* NCS Setup Length in Write Access */ +#define AT91_SMC_NCS_WRSETUP_(x) ((x) << 8) +#define AT91_SMC_NRDSETUP (0x3f << 16) /* NRD Setup Length */ +#define AT91_SMC_NRDSETUP_(x) ((x) << 16) +#define AT91_SMC_NCS_RDSETUP (0x3f << 24) /* NCS Setup Length in Read Access */ +#define AT91_SMC_NCS_RDSETUP_(x) ((x) << 24) + +#define AT91_SMC_PULSE(n) (AT91_SMC + 0x04 + ((n)*0x10)) /* Pulse Register for CS n */ +#define AT91_SMC_NWEPULSE (0x7f << 0) /* NWE Pulse Length */ +#define AT91_SMC_NWEPULSE_(x) ((x) << 0) +#define AT91_SMC_NCS_WRPULSE (0x7f << 8) /* NCS Pulse Length in Write Access */ +#define AT91_SMC_NCS_WRPULSE_(x)((x) << 8) +#define AT91_SMC_NRDPULSE (0x7f << 16) /* NRD Pulse Length */ +#define AT91_SMC_NRDPULSE_(x) ((x) << 16) +#define AT91_SMC_NCS_RDPULSE (0x7f << 24) /* NCS Pulse Length in Read Access */ +#define AT91_SMC_NCS_RDPULSE_(x)((x) << 24) + +#define AT91_SMC_CYCLE(n) (AT91_SMC + 0x08 + ((n)*0x10)) /* Cycle Register for CS n */ +#define AT91_SMC_NWECYCLE (0x1ff << 0 ) /* Total Write Cycle Length */ +#define AT91_SMC_NWECYCLE_(x) ((x) << 0) +#define AT91_SMC_NRDCYCLE (0x1ff << 16) /* Total Read Cycle Length */ +#define AT91_SMC_NRDCYCLE_(x) ((x) << 16) + +#define AT91_SMC_MODE(n) (AT91_SMC + 0x0c + ((n)*0x10)) /* Mode Register for CS n */ +#define AT91_SMC_READMODE (1 << 0) /* Read Mode */ +#define AT91_SMC_WRITEMODE (1 << 1) /* Write Mode */ +#define AT91_SMC_EXNWMODE (3 << 4) /* NWAIT Mode */ +#define AT91_SMC_EXNWMODE_DISABLE (0 << 4) +#define AT91_SMC_EXNWMODE_FROZEN (2 << 4) +#define AT91_SMC_EXNWMODE_READY (3 << 4) +#define AT91_SMC_BAT (1 << 8) /* Byte Access Type */ +#define AT91_SMC_BAT_SELECT (0 << 8) +#define AT91_SMC_BAT_WRITE (1 << 8) +#define AT91_SMC_DBW (3 << 12) /* Data Bus Width */ +#define AT91_SMC_DBW_8 (0 << 12) +#define AT91_SMC_DBW_16 (1 << 12) +#define AT91_SMC_DBW_32 (2 << 12) +#define AT91_SMC_TDF (0xf << 16) /* Data Float Time. */ +#define AT91_SMC_TDF_(x) ((x) << 16) +#define AT91_SMC_TDFMODE (1 << 20) /* TDF Optimization - Enabled */ +#define AT91_SMC_PMEN (1 << 24) /* Page Mode Enabled */ +#define AT91_SMC_PS (3 << 28) /* Page Size */ +#define AT91_SMC_PS_4 (0 << 28) +#define AT91_SMC_PS_8 (1 << 28) +#define AT91_SMC_PS_16 (2 << 28) +#define AT91_SMC_PS_32 (3 << 28) + +#if defined(AT91_SMC1) /* The AT91SAM9263 has 2 Static Memory contollers */ +#define AT91_SMC1_SETUP(n) (AT91_SMC1 + 0x00 + ((n)*0x10)) /* Setup Register for CS n */ +#define AT91_SMC1_PULSE(n) (AT91_SMC1 + 0x04 + ((n)*0x10)) /* Pulse Register for CS n */ +#define AT91_SMC1_CYCLE(n) (AT91_SMC1 + 0x08 + ((n)*0x10)) /* Cycle Register for CS n */ +#define AT91_SMC1_MODE(n) (AT91_SMC1 + 0x0c + ((n)*0x10)) /* Mode Register for CS n */ +#endif + +#endif diff --git a/arch/arm/mach-at91/include/mach/at91sam9rl.h b/arch/arm/mach-at91/include/mach/at91sam9rl.h new file mode 100644 index 00000000000..fc2de6c09c8 --- /dev/null +++ b/arch/arm/mach-at91/include/mach/at91sam9rl.h @@ -0,0 +1,115 @@ +/* + * arch/arm/mach-at91/include/mach/at91sam9260.h + * + * Copyright (C) 2007 Atmel Corporation + * + * Common definitions. + * Based on AT91SAM9RL datasheet revision A. (Preliminary) + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive for + * more details. + */ + +#ifndef AT91SAM9RL_H +#define AT91SAM9RL_H + +/* + * Peripheral identifiers/interrupts. + */ +#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ +#define AT91_ID_SYS 1 /* System Controller */ +#define AT91SAM9RL_ID_PIOA 2 /* Parallel IO Controller A */ +#define AT91SAM9RL_ID_PIOB 3 /* Parallel IO Controller B */ +#define AT91SAM9RL_ID_PIOC 4 /* Parallel IO Controller C */ +#define AT91SAM9RL_ID_PIOD 5 /* Parallel IO Controller D */ +#define AT91SAM9RL_ID_US0 6 /* USART 0 */ +#define AT91SAM9RL_ID_US1 7 /* USART 1 */ +#define AT91SAM9RL_ID_US2 8 /* USART 2 */ +#define AT91SAM9RL_ID_US3 9 /* USART 3 */ +#define AT91SAM9RL_ID_MCI 10 /* Multimedia Card Interface */ +#define AT91SAM9RL_ID_TWI0 11 /* TWI 0 */ +#define AT91SAM9RL_ID_TWI1 12 /* TWI 1 */ +#define AT91SAM9RL_ID_SPI 13 /* Serial Peripheral Interface */ +#define AT91SAM9RL_ID_SSC0 14 /* Serial Synchronous Controller 0 */ +#define AT91SAM9RL_ID_SSC1 15 /* Serial Synchronous Controller 1 */ +#define AT91SAM9RL_ID_TC0 16 /* Timer Counter 0 */ +#define AT91SAM9RL_ID_TC1 17 /* Timer Counter 1 */ +#define AT91SAM9RL_ID_TC2 18 /* Timer Counter 2 */ +#define AT91SAM9RL_ID_PWMC 19 /* Pulse Width Modulation Controller */ +#define AT91SAM9RL_ID_TSC 20 /* Touch Screen Controller */ +#define AT91SAM9RL_ID_DMA 21 /* DMA Controller */ +#define AT91SAM9RL_ID_UDPHS 22 /* USB Device HS */ +#define AT91SAM9RL_ID_LCDC 23 /* LCD Controller */ +#define AT91SAM9RL_ID_AC97C 24 /* AC97 Controller */ +#define AT91SAM9RL_ID_IRQ0 31 /* Advanced Interrupt Controller (IRQ0) */ + + +/* + * User Peripheral physical base addresses. + */ +#define AT91SAM9RL_BASE_TCB0 0xfffa0000 +#define AT91SAM9RL_BASE_TC0 0xfffa0000 +#define AT91SAM9RL_BASE_TC1 0xfffa0040 +#define AT91SAM9RL_BASE_TC2 0xfffa0080 +#define AT91SAM9RL_BASE_MCI 0xfffa4000 +#define AT91SAM9RL_BASE_TWI0 0xfffa8000 +#define AT91SAM9RL_BASE_TWI1 0xfffac000 +#define AT91SAM9RL_BASE_US0 0xfffb0000 +#define AT91SAM9RL_BASE_US1 0xfffb4000 +#define AT91SAM9RL_BASE_US2 0xfffb8000 +#define AT91SAM9RL_BASE_US3 0xfffbc000 +#define AT91SAM9RL_BASE_SSC0 0xfffc0000 +#define AT91SAM9RL_BASE_SSC1 0xfffc4000 +#define AT91SAM9RL_BASE_PWMC 0xfffc8000 +#define AT91SAM9RL_BASE_SPI 0xfffcc000 +#define AT91SAM9RL_BASE_TSC 0xfffd0000 +#define AT91SAM9RL_BASE_UDPHS 0xfffd4000 +#define AT91SAM9RL_BASE_AC97C 0xfffd8000 +#define AT91_BASE_SYS 0xffffc000 + + +/* + * System Peripherals (offset from AT91_BASE_SYS) + */ +#define AT91_DMA (0xffffe600 - AT91_BASE_SYS) +#define AT91_ECC (0xffffe800 - AT91_BASE_SYS) +#define AT91_SDRAMC (0xffffea00 - AT91_BASE_SYS) +#define AT91_SMC (0xffffec00 - AT91_BASE_SYS) +#define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS) +#define AT91_CCFG (0xffffef10 - AT91_BASE_SYS) +#define AT91_AIC (0xfffff000 - AT91_BASE_SYS) +#define AT91_DBGU (0xfffff200 - AT91_BASE_SYS) +#define AT91_PIOA (0xfffff400 - AT91_BASE_SYS) +#define AT91_PIOB (0xfffff600 - AT91_BASE_SYS) +#define AT91_PIOC (0xfffff800 - AT91_BASE_SYS) +#define AT91_PIOD (0xfffffa00 - AT91_BASE_SYS) +#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) +#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS) +#define AT91_SHDWC (0xfffffd10 - AT91_BASE_SYS) +#define AT91_RTT (0xfffffd20 - AT91_BASE_SYS) +#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS) +#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS) +#define AT91_SCKCR (0xfffffd50 - AT91_BASE_SYS) +#define AT91_GPBR (0xfffffd60 - AT91_BASE_SYS) +#define AT91_RTC (0xfffffe00 - AT91_BASE_SYS) + +#define AT91_USART0 AT91SAM9RL_BASE_US0 +#define AT91_USART1 AT91SAM9RL_BASE_US1 +#define AT91_USART2 AT91SAM9RL_BASE_US2 +#define AT91_USART3 AT91SAM9RL_BASE_US3 + + +/* + * Internal Memory. + */ +#define AT91SAM9RL_SRAM_BASE 0x00300000 /* Internal SRAM base address */ +#define AT91SAM9RL_SRAM_SIZE SZ_16K /* Internal SRAM size (16Kb) */ + +#define AT91SAM9RL_ROM_BASE 0x00400000 /* Internal ROM base address */ +#define AT91SAM9RL_ROM_SIZE (2 * SZ_16K) /* Internal ROM size (32Kb) */ + +#define AT91SAM9RL_LCDC_BASE 0x00500000 /* LCD Controller */ +#define AT91SAM9RL_UDPHS_FIFO 0x00600000 /* USB Device HS controller */ + +#endif diff --git a/arch/arm/mach-at91/include/mach/at91sam9rl_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9rl_matrix.h new file mode 100644 index 00000000000..5f9149071fe --- /dev/null +++ b/arch/arm/mach-at91/include/mach/at91sam9rl_matrix.h @@ -0,0 +1,96 @@ +/* + * arch/arm/mach-at91/include/mach/at91sam9rl_matrix.h + * + * Copyright (C) 2007 Atmel Corporation + * + * Memory Controllers (MATRIX, EBI) - System peripherals registers. + * Based on AT91SAM9RL datasheet revision A. (Preliminary) + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive for + * more details. + */ + +#ifndef AT91SAM9RL_MATRIX_H +#define AT91SAM9RL_MATRIX_H + +#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */ +#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */ +#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */ +#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */ +#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */ +#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */ +#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */ +#define AT91_MATRIX_ULBT_INFINITE (0 << 0) +#define AT91_MATRIX_ULBT_SINGLE (1 << 0) +#define AT91_MATRIX_ULBT_FOUR (2 << 0) +#define AT91_MATRIX_ULBT_EIGHT (3 << 0) +#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0) + +#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */ +#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */ +#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */ +#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */ +#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */ +#define AT91_MATRIX_SCFG5 (AT91_MATRIX + 0x54) /* Slave Configuration Register 5 */ +#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */ +#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */ +#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16) +#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16) +#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16) +#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */ +#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */ +#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24) +#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24) + +#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */ +#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */ +#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */ +#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */ +#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */ +#define AT91_MATRIX_PRAS5 (AT91_MATRIX + 0xA8) /* Priority Register A for Slave 5 */ +#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */ +#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */ +#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */ +#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */ +#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */ +#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */ + +#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */ +#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */ +#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */ +#define AT91_MATRIX_RCB2 (1 << 2) +#define AT91_MATRIX_RCB3 (1 << 3) +#define AT91_MATRIX_RCB4 (1 << 4) +#define AT91_MATRIX_RCB5 (1 << 5) + +#define AT91_MATRIX_TCMR (AT91_MATRIX + 0x114) /* TCM Configuration Register */ +#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */ +#define AT91_MATRIX_ITCM_0 (0 << 0) +#define AT91_MATRIX_ITCM_16 (5 << 0) +#define AT91_MATRIX_ITCM_32 (6 << 0) +#define AT91_MATRIX_DTCM_SIZE (0xf << 4) /* Size of DTCM enabled memory block */ +#define AT91_MATRIX_DTCM_0 (0 << 4) +#define AT91_MATRIX_DTCM_16 (5 << 4) +#define AT91_MATRIX_DTCM_32 (6 << 4) + +#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x120) /* EBI0 Chip Select Assignment Register */ +#define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */ +#define AT91_MATRIX_CS1A_SMC (0 << 1) +#define AT91_MATRIX_CS1A_SDRAMC (1 << 1) +#define AT91_MATRIX_CS3A (1 << 3) /* Chip Select 3 Assignment */ +#define AT91_MATRIX_CS3A_SMC (0 << 3) +#define AT91_MATRIX_CS3A_SMC_SMARTMEDIA (1 << 3) +#define AT91_MATRIX_CS4A (1 << 4) /* Chip Select 4 Assignment */ +#define AT91_MATRIX_CS4A_SMC (0 << 4) +#define AT91_MATRIX_CS4A_SMC_CF1 (1 << 4) +#define AT91_MATRIX_CS5A (1 << 5) /* Chip Select 5 Assignment */ +#define AT91_MATRIX_CS5A_SMC (0 << 5) +#define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5) +#define AT91_MATRIX_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */ +#define AT91_MATRIX_VDDIOMSEL (1 << 16) /* Memory voltage selection */ +#define AT91_MATRIX_VDDIOMSEL_1_8V (0 << 16) +#define AT91_MATRIX_VDDIOMSEL_3_3V (1 << 16) + + +#endif diff --git a/arch/arm/mach-at91/include/mach/at91x40.h b/arch/arm/mach-at91/include/mach/at91x40.h new file mode 100644 index 00000000000..d34cdb8abdc --- /dev/null +++ b/arch/arm/mach-at91/include/mach/at91x40.h @@ -0,0 +1,55 @@ +/* + * arch/arm/mach-at91/include/mach/at91x40.h + * + * (C) Copyright 2007, Greg Ungerer <gerg@snapgear.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91X40_H +#define AT91X40_H + +/* + * IRQ list. + */ +#define AT91_ID_FIQ 0 /* FIQ */ +#define AT91_ID_SYS 1 /* System Peripheral */ +#define AT91X40_ID_USART0 2 /* USART port 0 */ +#define AT91X40_ID_USART1 3 /* USART port 1 */ +#define AT91X40_ID_TC0 4 /* Timer/Counter 0 */ +#define AT91X40_ID_TC1 5 /* Timer/Counter 1*/ +#define AT91X40_ID_TC2 6 /* Timer/Counter 2*/ +#define AT91X40_ID_WD 7 /* Watchdog? */ +#define AT91X40_ID_PIOA 8 /* Parallel IO Controller A */ + +#define AT91X40_ID_IRQ0 16 /* External IRQ 0 */ +#define AT91X40_ID_IRQ1 17 /* External IRQ 1 */ +#define AT91X40_ID_IRQ2 18 /* External IRQ 2 */ + +/* + * System Peripherals (offset from AT91_BASE_SYS) + */ +#define AT91_BASE_SYS 0xffc00000 + +#define AT91_EBI (0xffe00000 - AT91_BASE_SYS) /* External Bus Interface */ +#define AT91_SF (0xfff00000 - AT91_BASE_SYS) /* Special Function */ +#define AT91_USART1 (0xfffcc000 - AT91_BASE_SYS) /* USART 1 */ +#define AT91_USART0 (0xfffd0000 - AT91_BASE_SYS) /* USART 0 */ +#define AT91_TC (0xfffe0000 - AT91_BASE_SYS) /* Timer Counter */ +#define AT91_PIOA (0xffff0000 - AT91_BASE_SYS) /* PIO Controller A */ +#define AT91_PS (0xffff4000 - AT91_BASE_SYS) /* Power Save */ +#define AT91_WD (0xffff8000 - AT91_BASE_SYS) /* Watchdog Timer */ +#define AT91_AIC (0xfffff000 - AT91_BASE_SYS) /* Advanced Interrupt Controller */ + +/* + * The AT91x40 series doesn't have a debug unit like the other AT91 parts. + * But it does have a chip identify register and extension ID, so define at + * least these here. + */ +#define AT91_DBGU_CIDR (AT91_SF + 0) /* CIDR in PS segment */ +#define AT91_DBGU_EXID (AT91_SF + 4) /* EXID in PS segment */ + +#endif /* AT91X40_H */ diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h new file mode 100644 index 00000000000..acd60f2a072 --- /dev/null +++ b/arch/arm/mach-at91/include/mach/board.h @@ -0,0 +1,172 @@ +/* + * arch/arm/mach-at91/include/mach/board.h + * + * Copyright (C) 2005 HP Labs + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +/* + * These are data structures found in platform_device.dev.platform_data, + * and describing board-specific data needed by drivers. For example, + * which pin is used for a given GPIO role. + * + * In 2.6, drivers should strongly avoid board-specific knowledge so + * that supporting new boards normally won't require driver patches. + * Most board-specific knowledge should be in arch/.../board-*.c files. + */ + +#ifndef __ASM_ARCH_BOARD_H +#define __ASM_ARCH_BOARD_H + +#include <linux/mtd/partitions.h> +#include <linux/device.h> +#include <linux/i2c.h> +#include <linux/leds.h> +#include <linux/spi/spi.h> +#include <linux/usb/atmel_usba_udc.h> + + /* USB Device */ +struct at91_udc_data { + u8 vbus_pin; /* high == host powering us */ + u8 pullup_pin; /* active == D+ pulled up */ + u8 pullup_active_low; /* true == pullup_pin is active low */ +}; +extern void __init at91_add_device_udc(struct at91_udc_data *data); + + /* USB High Speed Device */ +extern void __init at91_add_device_usba(struct usba_platform_data *data); + + /* Compact Flash */ +struct at91_cf_data { + u8 irq_pin; /* I/O IRQ */ + u8 det_pin; /* Card detect */ + u8 vcc_pin; /* power switching */ + u8 rst_pin; /* card reset */ + u8 chipselect; /* EBI Chip Select number */ +}; +extern void __init at91_add_device_cf(struct at91_cf_data *data); + + /* MMC / SD */ +struct at91_mmc_data { + u8 det_pin; /* card detect IRQ */ + unsigned slot_b:1; /* uses Slot B */ + unsigned wire4:1; /* (SD) supports DAT0..DAT3 */ + u8 wp_pin; /* (SD) writeprotect detect */ + u8 vcc_pin; /* power switching (high == on) */ +}; +extern void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data); + + /* Ethernet (EMAC & MACB) */ +struct at91_eth_data { + u32 phy_mask; + u8 phy_irq_pin; /* PHY IRQ */ + u8 is_rmii; /* using RMII interface? */ +}; +extern void __init at91_add_device_eth(struct at91_eth_data *data); + +#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9263) || defined(CONFIG_ARCH_AT91SAM9G20) || defined(CONFIG_ARCH_AT91CAP9) +#define eth_platform_data at91_eth_data +#endif + + /* USB Host */ +struct at91_usbh_data { + u8 ports; /* number of ports on root hub */ + u8 vbus_pin[]; /* port power-control pin */ +}; +extern void __init at91_add_device_usbh(struct at91_usbh_data *data); + + /* NAND / SmartMedia */ +struct atmel_nand_data { + u8 enable_pin; /* chip enable */ + u8 det_pin; /* card detect */ + u8 rdy_pin; /* ready/busy */ + u8 ale; /* address line number connected to ALE */ + u8 cle; /* address line number connected to CLE */ + u8 bus_width_16; /* buswidth is 16 bit */ + struct mtd_partition* (*partition_info)(int, int*); +}; +extern void __init at91_add_device_nand(struct atmel_nand_data *data); + + /* I2C*/ +extern void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices); + + /* SPI */ +extern void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices); + + /* Serial */ +#define ATMEL_UART_CTS 0x01 +#define ATMEL_UART_RTS 0x02 +#define ATMEL_UART_DSR 0x04 +#define ATMEL_UART_DTR 0x08 +#define ATMEL_UART_DCD 0x10 +#define ATMEL_UART_RI 0x20 + +extern void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins); +extern void __init at91_set_serial_console(unsigned portnr); + +struct at91_uart_config { + unsigned short console_tty; /* tty number of serial console */ + unsigned short nr_tty; /* number of serial tty's */ + short tty_map[]; /* map UART to tty number */ +}; +extern struct platform_device *atmel_default_console_device; +extern void __init __deprecated at91_init_serial(struct at91_uart_config *config); + +struct atmel_uart_data { + short use_dma_tx; /* use transmit DMA? */ + short use_dma_rx; /* use receive DMA? */ + void __iomem *regs; /* virtual base address, if any */ +}; +extern void __init at91_add_device_serial(void); + +/* + * SSC -- accessed through ssc_request(id). Drivers don't bind to SSC + * platform devices. Their SSC ID is part of their configuration data, + * along with information about which SSC signals they should use. + */ +#define ATMEL_SSC_TK 0x01 +#define ATMEL_SSC_TF 0x02 +#define ATMEL_SSC_TD 0x04 +#define ATMEL_SSC_TX (ATMEL_SSC_TK | ATMEL_SSC_TF | ATMEL_SSC_TD) + +#define ATMEL_SSC_RK 0x10 +#define ATMEL_SSC_RF 0x20 +#define ATMEL_SSC_RD 0x40 +#define ATMEL_SSC_RX (ATMEL_SSC_RK | ATMEL_SSC_RF | ATMEL_SSC_RD) + +extern void __init at91_add_device_ssc(unsigned id, unsigned pins); + + /* LCD Controller */ +struct atmel_lcdfb_info; +extern void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data); + + /* AC97 */ +struct atmel_ac97_data { + u8 reset_pin; /* reset */ +}; +extern void __init at91_add_device_ac97(struct atmel_ac97_data *data); + + /* ISI */ +extern void __init at91_add_device_isi(void); + + /* LEDs */ +extern void __init at91_init_leds(u8 cpu_led, u8 timer_led); +extern void __init at91_gpio_leds(struct gpio_led *leds, int nr); + +/* FIXME: this needs a better location, but gets stuff building again */ +extern int at91_suspend_entering_slow_clock(void); + +#endif diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h new file mode 100644 index 00000000000..dbfd9f73f80 --- /dev/null +++ b/arch/arm/mach-at91/include/mach/cpu.h @@ -0,0 +1,103 @@ +/* + * arch/arm/mach-at91/include/mach/cpu.h + * + * Copyright (C) 2006 SAN People + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#ifndef __ASM_ARCH_CPU_H +#define __ASM_ARCH_CPU_H + +#include <mach/hardware.h> +#include <mach/at91_dbgu.h> + + +#define ARCH_ID_AT91RM9200 0x09290780 +#define ARCH_ID_AT91SAM9260 0x019803a0 +#define ARCH_ID_AT91SAM9261 0x019703a0 +#define ARCH_ID_AT91SAM9263 0x019607a0 +#define ARCH_ID_AT91SAM9G20 0x019905a0 +#define ARCH_ID_AT91SAM9RL64 0x019b03a0 +#define ARCH_ID_AT91CAP9 0x039A03A0 + +#define ARCH_ID_AT91SAM9XE128 0x329973a0 +#define ARCH_ID_AT91SAM9XE256 0x329a93a0 +#define ARCH_ID_AT91SAM9XE512 0x329aa3a0 + +#define ARCH_ID_AT91M40800 0x14080044 +#define ARCH_ID_AT91R40807 0x44080746 +#define ARCH_ID_AT91M40807 0x14080745 +#define ARCH_ID_AT91R40008 0x44000840 + +static inline unsigned long at91_cpu_identify(void) +{ + return (at91_sys_read(AT91_DBGU_CIDR) & ~AT91_CIDR_VERSION); +} + + +#define ARCH_FAMILY_AT91X92 0x09200000 +#define ARCH_FAMILY_AT91SAM9 0x01900000 +#define ARCH_FAMILY_AT91SAM9XE 0x02900000 + +static inline unsigned long at91_arch_identify(void) +{ + return (at91_sys_read(AT91_DBGU_CIDR) & AT91_CIDR_ARCH); +} + + +#ifdef CONFIG_ARCH_AT91RM9200 +#define cpu_is_at91rm9200() (at91_cpu_identify() == ARCH_ID_AT91RM9200) +#else +#define cpu_is_at91rm9200() (0) +#endif + +#ifdef CONFIG_ARCH_AT91SAM9260 +#define cpu_is_at91sam9xe() (at91_arch_identify() == ARCH_FAMILY_AT91SAM9XE) +#define cpu_is_at91sam9260() ((at91_cpu_identify() == ARCH_ID_AT91SAM9260) || cpu_is_at91sam9xe()) +#else +#define cpu_is_at91sam9xe() (0) +#define cpu_is_at91sam9260() (0) +#endif + +#ifdef CONFIG_ARCH_AT91SAM9G20 +#define cpu_is_at91sam9g20() (at91_cpu_identify() == ARCH_ID_AT91SAM9G20) +#else +#define cpu_is_at91sam9g20() (0) +#endif + +#ifdef CONFIG_ARCH_AT91SAM9261 +#define cpu_is_at91sam9261() (at91_cpu_identify() == ARCH_ID_AT91SAM9261) +#else +#define cpu_is_at91sam9261() (0) +#endif + +#ifdef CONFIG_ARCH_AT91SAM9263 +#define cpu_is_at91sam9263() (at91_cpu_identify() == ARCH_ID_AT91SAM9263) +#else +#define cpu_is_at91sam9263() (0) +#endif + +#ifdef CONFIG_ARCH_AT91SAM9RL +#define cpu_is_at91sam9rl() (at91_cpu_identify() == ARCH_ID_AT91SAM9RL64) +#else +#define cpu_is_at91sam9rl() (0) +#endif + +#ifdef CONFIG_ARCH_AT91CAP9 +#define cpu_is_at91cap9() (at91_cpu_identify() == ARCH_ID_AT91CAP9) +#else +#define cpu_is_at91cap9() (0) +#endif + +/* + * Since this is ARM, we will never run on any AVR32 CPU. But these + * definitions may reduce clutter in common drivers. + */ +#define cpu_is_at32ap7000() (0) + +#endif diff --git a/arch/arm/mach-at91/include/mach/debug-macro.S b/arch/arm/mach-at91/include/mach/debug-macro.S new file mode 100644 index 00000000000..29052ba66ad --- /dev/null +++ b/arch/arm/mach-at91/include/mach/debug-macro.S @@ -0,0 +1,39 @@ +/* + * arch/arm/mach-at91/include/mach/debug-macro.S + * + * Copyright (C) 2003-2005 SAN People + * + * Debugging macro include header + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * +*/ + +#include <mach/hardware.h> +#include <mach/at91_dbgu.h> + + .macro addruart,rx + mrc p15, 0, \rx, c1, c0 + tst \rx, #1 @ MMU enabled? + ldreq \rx, =(AT91_BASE_SYS + AT91_DBGU) @ System peripherals (phys address) + ldrne \rx, =(AT91_VA_BASE_SYS + AT91_DBGU) @ System peripherals (virt address) + .endm + + .macro senduart,rd,rx + strb \rd, [\rx, #(AT91_DBGU_THR - AT91_DBGU)] @ Write to Transmitter Holding Register + .endm + + .macro waituart,rd,rx +1001: ldr \rd, [\rx, #(AT91_DBGU_SR - AT91_DBGU)] @ Read Status Register + tst \rd, #AT91_DBGU_TXRDY @ DBGU_TXRDY = 1 when ready to transmit + beq 1001b + .endm + + .macro busyuart,rd,rx +1001: ldr \rd, [\rx, #(AT91_DBGU_SR - AT91_DBGU)] @ Read Status Register + tst \rd, #AT91_DBGU_TXEMPTY @ DBGU_TXEMPTY = 1 when transmission complete + beq 1001b + .endm + diff --git a/arch/arm/mach-at91/include/mach/dma.h b/arch/arm/mach-at91/include/mach/dma.h new file mode 100644 index 00000000000..e4f90c17761 --- /dev/null +++ b/arch/arm/mach-at91/include/mach/dma.h @@ -0,0 +1,19 @@ +/* + * arch/arm/mach-at91/include/mach/dma.h + * + * Copyright (C) 2003 SAN People + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ diff --git a/arch/arm/mach-at91/include/mach/entry-macro.S b/arch/arm/mach-at91/include/mach/entry-macro.S new file mode 100644 index 00000000000..7ab68f97222 --- /dev/null +++ b/arch/arm/mach-at91/include/mach/entry-macro.S @@ -0,0 +1,32 @@ +/* + * arch/arm/mach-at91/include/mach/entry-macro.S + * + * Copyright (C) 2003-2005 SAN People + * + * Low-level IRQ helper macros for AT91RM9200 platforms + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <mach/hardware.h> +#include <mach/at91_aic.h> + + .macro disable_fiq + .endm + + .macro get_irqnr_preamble, base, tmp + ldr \base, =(AT91_VA_BASE_SYS + AT91_AIC) @ base virtual address of AIC peripheral + .endm + + .macro arch_ret_to_user, tmp1, tmp2 + .endm + + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + ldr \irqnr, [\base, #(AT91_AIC_IVR - AT91_AIC)] @ read IRQ vector register: de-asserts nIRQ to processor (and clears interrupt) + ldr \irqstat, [\base, #(AT91_AIC_ISR - AT91_AIC)] @ read interrupt source number + teq \irqstat, #0 @ ISR is 0 when no current interrupt, or spurious interrupt + streq \tmp, [\base, #(AT91_AIC_EOICR - AT91_AIC)] @ not going to be handled further, then ACK it now. + .endm + diff --git a/arch/arm/mach-at91/include/mach/gpio.h b/arch/arm/mach-at91/include/mach/gpio.h new file mode 100644 index 00000000000..76d76e2fa69 --- /dev/null +++ b/arch/arm/mach-at91/include/mach/gpio.h @@ -0,0 +1,252 @@ +/* + * arch/arm/mach-at91/include/mach/gpio.h + * + * Copyright (C) 2005 HP Labs + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#ifndef __ASM_ARCH_AT91RM9200_GPIO_H +#define __ASM_ARCH_AT91RM9200_GPIO_H + +#include <asm/irq.h> + +#define PIN_BASE NR_AIC_IRQS + +#define MAX_GPIO_BANKS 5 + +/* these pin numbers double as IRQ numbers, like AT91xxx_ID_* values */ + +#define AT91_PIN_PA0 (PIN_BASE + 0x00 + 0) +#define AT91_PIN_PA1 (PIN_BASE + 0x00 + 1) +#define AT91_PIN_PA2 (PIN_BASE + 0x00 + 2) +#define AT91_PIN_PA3 (PIN_BASE + 0x00 + 3) +#define AT91_PIN_PA4 (PIN_BASE + 0x00 + 4) +#define AT91_PIN_PA5 (PIN_BASE + 0x00 + 5) +#define AT91_PIN_PA6 (PIN_BASE + 0x00 + 6) +#define AT91_PIN_PA7 (PIN_BASE + 0x00 + 7) +#define AT91_PIN_PA8 (PIN_BASE + 0x00 + 8) +#define AT91_PIN_PA9 (PIN_BASE + 0x00 + 9) +#define AT91_PIN_PA10 (PIN_BASE + 0x00 + 10) +#define AT91_PIN_PA11 (PIN_BASE + 0x00 + 11) +#define AT91_PIN_PA12 (PIN_BASE + 0x00 + 12) +#define AT91_PIN_PA13 (PIN_BASE + 0x00 + 13) +#define AT91_PIN_PA14 (PIN_BASE + 0x00 + 14) +#define AT91_PIN_PA15 (PIN_BASE + 0x00 + 15) +#define AT91_PIN_PA16 (PIN_BASE + 0x00 + 16) +#define AT91_PIN_PA17 (PIN_BASE + 0x00 + 17) +#define AT91_PIN_PA18 (PIN_BASE + 0x00 + 18) +#define AT91_PIN_PA19 (PIN_BASE + 0x00 + 19) +#define AT91_PIN_PA20 (PIN_BASE + 0x00 + 20) +#define AT91_PIN_PA21 (PIN_BASE + 0x00 + 21) +#define AT91_PIN_PA22 (PIN_BASE + 0x00 + 22) +#define AT91_PIN_PA23 (PIN_BASE + 0x00 + 23) +#define AT91_PIN_PA24 (PIN_BASE + 0x00 + 24) +#define AT91_PIN_PA25 (PIN_BASE + 0x00 + 25) +#define AT91_PIN_PA26 (PIN_BASE + 0x00 + 26) +#define AT91_PIN_PA27 (PIN_BASE + 0x00 + 27) +#define AT91_PIN_PA28 (PIN_BASE + 0x00 + 28) +#define AT91_PIN_PA29 (PIN_BASE + 0x00 + 29) +#define AT91_PIN_PA30 (PIN_BASE + 0x00 + 30) +#define AT91_PIN_PA31 (PIN_BASE + 0x00 + 31) + +#define AT91_PIN_PB0 (PIN_BASE + 0x20 + 0) +#define AT91_PIN_PB1 (PIN_BASE + 0x20 + 1) +#define AT91_PIN_PB2 (PIN_BASE + 0x20 + 2) +#define AT91_PIN_PB3 (PIN_BASE + 0x20 + 3) +#define AT91_PIN_PB4 (PIN_BASE + 0x20 + 4) +#define AT91_PIN_PB5 (PIN_BASE + 0x20 + 5) +#define AT91_PIN_PB6 (PIN_BASE + 0x20 + 6) +#define AT91_PIN_PB7 (PIN_BASE + 0x20 + 7) +#define AT91_PIN_PB8 (PIN_BASE + 0x20 + 8) +#define AT91_PIN_PB9 (PIN_BASE + 0x20 + 9) +#define AT91_PIN_PB10 (PIN_BASE + 0x20 + 10) +#define AT91_PIN_PB11 (PIN_BASE + 0x20 + 11) +#define AT91_PIN_PB12 (PIN_BASE + 0x20 + 12) +#define AT91_PIN_PB13 (PIN_BASE + 0x20 + 13) +#define AT91_PIN_PB14 (PIN_BASE + 0x20 + 14) +#define AT91_PIN_PB15 (PIN_BASE + 0x20 + 15) +#define AT91_PIN_PB16 (PIN_BASE + 0x20 + 16) +#define AT91_PIN_PB17 (PIN_BASE + 0x20 + 17) +#define AT91_PIN_PB18 (PIN_BASE + 0x20 + 18) +#define AT91_PIN_PB19 (PIN_BASE + 0x20 + 19) +#define AT91_PIN_PB20 (PIN_BASE + 0x20 + 20) +#define AT91_PIN_PB21 (PIN_BASE + 0x20 + 21) +#define AT91_PIN_PB22 (PIN_BASE + 0x20 + 22) +#define AT91_PIN_PB23 (PIN_BASE + 0x20 + 23) +#define AT91_PIN_PB24 (PIN_BASE + 0x20 + 24) +#define AT91_PIN_PB25 (PIN_BASE + 0x20 + 25) +#define AT91_PIN_PB26 (PIN_BASE + 0x20 + 26) +#define AT91_PIN_PB27 (PIN_BASE + 0x20 + 27) +#define AT91_PIN_PB28 (PIN_BASE + 0x20 + 28) +#define AT91_PIN_PB29 (PIN_BASE + 0x20 + 29) +#define AT91_PIN_PB30 (PIN_BASE + 0x20 + 30) +#define AT91_PIN_PB31 (PIN_BASE + 0x20 + 31) + +#define AT91_PIN_PC0 (PIN_BASE + 0x40 + 0) +#define AT91_PIN_PC1 (PIN_BASE + 0x40 + 1) +#define AT91_PIN_PC2 (PIN_BASE + 0x40 + 2) +#define AT91_PIN_PC3 (PIN_BASE + 0x40 + 3) +#define AT91_PIN_PC4 (PIN_BASE + 0x40 + 4) +#define AT91_PIN_PC5 (PIN_BASE + 0x40 + 5) +#define AT91_PIN_PC6 (PIN_BASE + 0x40 + 6) +#define AT91_PIN_PC7 (PIN_BASE + 0x40 + 7) +#define AT91_PIN_PC8 (PIN_BASE + 0x40 + 8) +#define AT91_PIN_PC9 (PIN_BASE + 0x40 + 9) +#define AT91_PIN_PC10 (PIN_BASE + 0x40 + 10) +#define AT91_PIN_PC11 (PIN_BASE + 0x40 + 11) +#define AT91_PIN_PC12 (PIN_BASE + 0x40 + 12) +#define AT91_PIN_PC13 (PIN_BASE + 0x40 + 13) +#define AT91_PIN_PC14 (PIN_BASE + 0x40 + 14) +#define AT91_PIN_PC15 (PIN_BASE + 0x40 + 15) +#define AT91_PIN_PC16 (PIN_BASE + 0x40 + 16) +#define AT91_PIN_PC17 (PIN_BASE + 0x40 + 17) +#define AT91_PIN_PC18 (PIN_BASE + 0x40 + 18) +#define AT91_PIN_PC19 (PIN_BASE + 0x40 + 19) +#define AT91_PIN_PC20 (PIN_BASE + 0x40 + 20) +#define AT91_PIN_PC21 (PIN_BASE + 0x40 + 21) +#define AT91_PIN_PC22 (PIN_BASE + 0x40 + 22) +#define AT91_PIN_PC23 (PIN_BASE + 0x40 + 23) +#define AT91_PIN_PC24 (PIN_BASE + 0x40 + 24) +#define AT91_PIN_PC25 (PIN_BASE + 0x40 + 25) +#define AT91_PIN_PC26 (PIN_BASE + 0x40 + 26) +#define AT91_PIN_PC27 (PIN_BASE + 0x40 + 27) +#define AT91_PIN_PC28 (PIN_BASE + 0x40 + 28) +#define AT91_PIN_PC29 (PIN_BASE + 0x40 + 29) +#define AT91_PIN_PC30 (PIN_BASE + 0x40 + 30) +#define AT91_PIN_PC31 (PIN_BASE + 0x40 + 31) + +#define AT91_PIN_PD0 (PIN_BASE + 0x60 + 0) +#define AT91_PIN_PD1 (PIN_BASE + 0x60 + 1) +#define AT91_PIN_PD2 (PIN_BASE + 0x60 + 2) +#define AT91_PIN_PD3 (PIN_BASE + 0x60 + 3) +#define AT91_PIN_PD4 (PIN_BASE + 0x60 + 4) +#define AT91_PIN_PD5 (PIN_BASE + 0x60 + 5) +#define AT91_PIN_PD6 (PIN_BASE + 0x60 + 6) +#define AT91_PIN_PD7 (PIN_BASE + 0x60 + 7) +#define AT91_PIN_PD8 (PIN_BASE + 0x60 + 8) +#define AT91_PIN_PD9 (PIN_BASE + 0x60 + 9) +#define AT91_PIN_PD10 (PIN_BASE + 0x60 + 10) +#define AT91_PIN_PD11 (PIN_BASE + 0x60 + 11) +#define AT91_PIN_PD12 (PIN_BASE + 0x60 + 12) +#define AT91_PIN_PD13 (PIN_BASE + 0x60 + 13) +#define AT91_PIN_PD14 (PIN_BASE + 0x60 + 14) +#define AT91_PIN_PD15 (PIN_BASE + 0x60 + 15) +#define AT91_PIN_PD16 (PIN_BASE + 0x60 + 16) +#define AT91_PIN_PD17 (PIN_BASE + 0x60 + 17) +#define AT91_PIN_PD18 (PIN_BASE + 0x60 + 18) +#define AT91_PIN_PD19 (PIN_BASE + 0x60 + 19) +#define AT91_PIN_PD20 (PIN_BASE + 0x60 + 20) +#define AT91_PIN_PD21 (PIN_BASE + 0x60 + 21) +#define AT91_PIN_PD22 (PIN_BASE + 0x60 + 22) +#define AT91_PIN_PD23 (PIN_BASE + 0x60 + 23) +#define AT91_PIN_PD24 (PIN_BASE + 0x60 + 24) +#define AT91_PIN_PD25 (PIN_BASE + 0x60 + 25) +#define AT91_PIN_PD26 (PIN_BASE + 0x60 + 26) +#define AT91_PIN_PD27 (PIN_BASE + 0x60 + 27) +#define AT91_PIN_PD28 (PIN_BASE + 0x60 + 28) +#define AT91_PIN_PD29 (PIN_BASE + 0x60 + 29) +#define AT91_PIN_PD30 (PIN_BASE + 0x60 + 30) +#define AT91_PIN_PD31 (PIN_BASE + 0x60 + 31) + +#define AT91_PIN_PE0 (PIN_BASE + 0x80 + 0) +#define AT91_PIN_PE1 (PIN_BASE + 0x80 + 1) +#define AT91_PIN_PE2 (PIN_BASE + 0x80 + 2) +#define AT91_PIN_PE3 (PIN_BASE + 0x80 + 3) +#define AT91_PIN_PE4 (PIN_BASE + 0x80 + 4) +#define AT91_PIN_PE5 (PIN_BASE + 0x80 + 5) +#define AT91_PIN_PE6 (PIN_BASE + 0x80 + 6) +#define AT91_PIN_PE7 (PIN_BASE + 0x80 + 7) +#define AT91_PIN_PE8 (PIN_BASE + 0x80 + 8) +#define AT91_PIN_PE9 (PIN_BASE + 0x80 + 9) +#define AT91_PIN_PE10 (PIN_BASE + 0x80 + 10) +#define AT91_PIN_PE11 (PIN_BASE + 0x80 + 11) +#define AT91_PIN_PE12 (PIN_BASE + 0x80 + 12) +#define AT91_PIN_PE13 (PIN_BASE + 0x80 + 13) +#define AT91_PIN_PE14 (PIN_BASE + 0x80 + 14) +#define AT91_PIN_PE15 (PIN_BASE + 0x80 + 15) +#define AT91_PIN_PE16 (PIN_BASE + 0x80 + 16) +#define AT91_PIN_PE17 (PIN_BASE + 0x80 + 17) +#define AT91_PIN_PE18 (PIN_BASE + 0x80 + 18) +#define AT91_PIN_PE19 (PIN_BASE + 0x80 + 19) +#define AT91_PIN_PE20 (PIN_BASE + 0x80 + 20) +#define AT91_PIN_PE21 (PIN_BASE + 0x80 + 21) +#define AT91_PIN_PE22 (PIN_BASE + 0x80 + 22) +#define AT91_PIN_PE23 (PIN_BASE + 0x80 + 23) +#define AT91_PIN_PE24 (PIN_BASE + 0x80 + 24) +#define AT91_PIN_PE25 (PIN_BASE + 0x80 + 25) +#define AT91_PIN_PE26 (PIN_BASE + 0x80 + 26) +#define AT91_PIN_PE27 (PIN_BASE + 0x80 + 27) +#define AT91_PIN_PE28 (PIN_BASE + 0x80 + 28) +#define AT91_PIN_PE29 (PIN_BASE + 0x80 + 29) +#define AT91_PIN_PE30 (PIN_BASE + 0x80 + 30) +#define AT91_PIN_PE31 (PIN_BASE + 0x80 + 31) + +#ifndef __ASSEMBLY__ +/* setup setup routines, called from board init or driver probe() */ +extern int __init_or_module at91_set_GPIO_periph(unsigned pin, int use_pullup); +extern int __init_or_module at91_set_A_periph(unsigned pin, int use_pullup); +extern int __init_or_module at91_set_B_periph(unsigned pin, int use_pullup); +extern int __init_or_module at91_set_gpio_input(unsigned pin, int use_pullup); +extern int __init_or_module at91_set_gpio_output(unsigned pin, int value); +extern int __init_or_module at91_set_deglitch(unsigned pin, int is_on); +extern int __init_or_module at91_set_multi_drive(unsigned pin, int is_on); + +/* callable at any time */ +extern int at91_set_gpio_value(unsigned pin, int value); +extern int at91_get_gpio_value(unsigned pin); + +/* callable only from core power-management code */ +extern void at91_gpio_suspend(void); +extern void at91_gpio_resume(void); + +/*-------------------------------------------------------------------------*/ + +/* wrappers for "new style" GPIO calls. the old AT91-specfic ones should + * eventually be removed (along with this errno.h inclusion), and the + * gpio request/free calls should probably be implemented. + */ + +#include <asm/errno.h> + +static inline int gpio_request(unsigned gpio, const char *label) +{ + return 0; +} + +static inline void gpio_free(unsigned gpio) +{ +} + +extern int gpio_direction_input(unsigned gpio); +extern int gpio_direction_output(unsigned gpio, int value); + +static inline int gpio_get_value(unsigned gpio) +{ + return at91_get_gpio_value(gpio); +} + +static inline void gpio_set_value(unsigned gpio, int value) +{ + at91_set_gpio_value(gpio, value); +} + +#include <asm-generic/gpio.h> /* cansleep wrappers */ + +static inline int gpio_to_irq(unsigned gpio) +{ + return gpio; +} + +static inline int irq_to_gpio(unsigned irq) +{ + return irq; +} + +#endif /* __ASSEMBLY__ */ + +#endif diff --git a/arch/arm/mach-at91/include/mach/hardware.h b/arch/arm/mach-at91/include/mach/hardware.h new file mode 100644 index 00000000000..da0b681c652 --- /dev/null +++ b/arch/arm/mach-at91/include/mach/hardware.h @@ -0,0 +1,92 @@ +/* + * arch/arm/mach-at91/include/mach/hardware.h + * + * Copyright (C) 2003 SAN People + * Copyright (C) 2003 ATMEL + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#ifndef __ASM_ARCH_HARDWARE_H +#define __ASM_ARCH_HARDWARE_H + +#include <asm/sizes.h> + +#if defined(CONFIG_ARCH_AT91RM9200) +#include <mach/at91rm9200.h> +#elif defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9G20) +#include <mach/at91sam9260.h> +#elif defined(CONFIG_ARCH_AT91SAM9261) +#include <mach/at91sam9261.h> +#elif defined(CONFIG_ARCH_AT91SAM9263) +#include <mach/at91sam9263.h> +#elif defined(CONFIG_ARCH_AT91SAM9RL) +#include <mach/at91sam9rl.h> +#elif defined(CONFIG_ARCH_AT91CAP9) +#include <mach/at91cap9.h> +#elif defined(CONFIG_ARCH_AT91X40) +#include <mach/at91x40.h> +#else +#error "Unsupported AT91 processor" +#endif + + +#ifdef CONFIG_MMU +/* + * Remap the peripherals from address 0xFFF78000 .. 0xFFFFFFFF + * to 0xFEF78000 .. 0xFF000000. (544Kb) + */ +#define AT91_IO_PHYS_BASE 0xFFF78000 +#define AT91_IO_VIRT_BASE (0xFF000000 - AT91_IO_SIZE) +#else +/* + * Identity mapping for the non MMU case. + */ +#define AT91_IO_PHYS_BASE AT91_BASE_SYS +#define AT91_IO_VIRT_BASE AT91_IO_PHYS_BASE +#endif + +#define AT91_IO_SIZE (0xFFFFFFFF - AT91_IO_PHYS_BASE + 1) + + /* Convert a physical IO address to virtual IO address */ +#define AT91_IO_P2V(x) ((x) - AT91_IO_PHYS_BASE + AT91_IO_VIRT_BASE) + +/* + * Virtual to Physical Address mapping for IO devices. + */ +#define AT91_VA_BASE_SYS AT91_IO_P2V(AT91_BASE_SYS) +#define AT91_VA_BASE_EMAC AT91_IO_P2V(AT91RM9200_BASE_EMAC) + + /* Internal SRAM is mapped below the IO devices */ +#define AT91_SRAM_MAX SZ_1M +#define AT91_VIRT_BASE (AT91_IO_VIRT_BASE - AT91_SRAM_MAX) + +/* Serial ports */ +#define ATMEL_MAX_UART 7 /* 6 USART3's and one DBGU port (SAM9260) */ + +/* External Memory Map */ +#define AT91_CHIPSELECT_0 0x10000000 +#define AT91_CHIPSELECT_1 0x20000000 +#define AT91_CHIPSELECT_2 0x30000000 +#define AT91_CHIPSELECT_3 0x40000000 +#define AT91_CHIPSELECT_4 0x50000000 +#define AT91_CHIPSELECT_5 0x60000000 +#define AT91_CHIPSELECT_6 0x70000000 +#define AT91_CHIPSELECT_7 0x80000000 + +/* SDRAM */ +#ifdef CONFIG_DRAM_BASE +#define AT91_SDRAM_BASE CONFIG_DRAM_BASE +#else +#define AT91_SDRAM_BASE AT91_CHIPSELECT_1 +#endif + +/* Clocks */ +#define AT91_SLOW_CLOCK 32768 /* slow clock */ + + +#endif diff --git a/arch/arm/mach-at91/include/mach/io.h b/arch/arm/mach-at91/include/mach/io.h new file mode 100644 index 00000000000..1611bd03f52 --- /dev/null +++ b/arch/arm/mach-at91/include/mach/io.h @@ -0,0 +1,48 @@ +/* + * arch/arm/mach-at91/include/mach/io.h + * + * Copyright (C) 2003 SAN People + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __ASM_ARCH_IO_H +#define __ASM_ARCH_IO_H + +#define IO_SPACE_LIMIT 0xFFFFFFFF + +#define __io(a) ((void __iomem *)(a)) +#define __mem_pci(a) (a) + + +#ifndef __ASSEMBLY__ + +static inline unsigned int at91_sys_read(unsigned int reg_offset) +{ + void __iomem *addr = (void __iomem *)AT91_VA_BASE_SYS; + + return __raw_readl(addr + reg_offset); +} + +static inline void at91_sys_write(unsigned int reg_offset, unsigned long value) +{ + void __iomem *addr = (void __iomem *)AT91_VA_BASE_SYS; + + __raw_writel(value, addr + reg_offset); +} + +#endif + +#endif diff --git a/arch/arm/mach-at91/include/mach/irqs.h b/arch/arm/mach-at91/include/mach/irqs.h new file mode 100644 index 00000000000..bda29ccbcd9 --- /dev/null +++ b/arch/arm/mach-at91/include/mach/irqs.h @@ -0,0 +1,48 @@ +/* + * arch/arm/mach-at91/include/mach/irqs.h + * + * Copyright (C) 2004 SAN People + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __ASM_ARCH_IRQS_H +#define __ASM_ARCH_IRQS_H + +#include <asm/io.h> +#include <mach/at91_aic.h> + +#define NR_AIC_IRQS 32 + + +/* + * Acknowledge interrupt with AIC after interrupt has been handled. + * (by kernel/irq.c) + */ +#define irq_finish(irq) do { at91_sys_write(AT91_AIC_EOICR, 0); } while (0) + + +/* + * IRQ interrupt symbols are the AT91xxx_ID_* symbols + * for IRQs handled directly through the AIC, or else the AT91_PIN_* + * symbols in gpio.h for ones handled indirectly as GPIOs. + * We make provision for 5 banks of GPIO. + */ +#define NR_IRQS (NR_AIC_IRQS + (5 * 32)) + +/* FIQ is AIC source 0. */ +#define FIQ_START AT91_ID_FIQ + +#endif diff --git a/arch/arm/mach-at91/include/mach/memory.h b/arch/arm/mach-at91/include/mach/memory.h new file mode 100644 index 00000000000..9dd1b8c79b0 --- /dev/null +++ b/arch/arm/mach-at91/include/mach/memory.h @@ -0,0 +1,39 @@ +/* + * arch/arm/mach-at91/include/mach/memory.h + * + * Copyright (C) 2004 SAN People + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __ASM_ARCH_MEMORY_H +#define __ASM_ARCH_MEMORY_H + +#include <mach/hardware.h> + +#define PHYS_OFFSET (AT91_SDRAM_BASE) + + +/* + * Virtual view <-> DMA view memory address translations + * virt_to_bus: Used to translate the virtual address to an + * address suitable to be passed to set_dma_addr + * bus_to_virt: Used to convert an address for DMA operations + * to an address that the kernel can use. + */ +#define __virt_to_bus(x) __virt_to_phys(x) +#define __bus_to_virt(x) __phys_to_virt(x) + +#endif diff --git a/arch/arm/mach-at91/include/mach/system.h b/arch/arm/mach-at91/include/mach/system.h new file mode 100644 index 00000000000..e712658d966 --- /dev/null +++ b/arch/arm/mach-at91/include/mach/system.h @@ -0,0 +1,53 @@ +/* + * arch/arm/mach-at91/include/mach/system.h + * + * Copyright (C) 2003 SAN People + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __ASM_ARCH_SYSTEM_H +#define __ASM_ARCH_SYSTEM_H + +#include <mach/hardware.h> +#include <mach/at91_st.h> +#include <mach/at91_dbgu.h> + +static inline void arch_idle(void) +{ + /* + * Disable the processor clock. The processor will be automatically + * re-enabled by an interrupt or by a reset. + */ +// at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK); + + /* + * Set the processor (CP15) into 'Wait for Interrupt' mode. + * Unlike disabling the processor clock via the PMC (above) + * this allows the processor to be woken via JTAG. + */ + cpu_do_idle(); +} + +void (*at91_arch_reset)(void); + +static inline void arch_reset(char mode) +{ + /* call the CPU-specific reset function */ + if (at91_arch_reset) + (at91_arch_reset)(); +} + +#endif diff --git a/arch/arm/mach-at91/include/mach/timex.h b/arch/arm/mach-at91/include/mach/timex.h new file mode 100644 index 00000000000..d84c9948bec --- /dev/null +++ b/arch/arm/mach-at91/include/mach/timex.h @@ -0,0 +1,77 @@ +/* + * arch/arm/mach-at91/include/mach/timex.h + * + * Copyright (C) 2003 SAN People + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __ASM_ARCH_TIMEX_H +#define __ASM_ARCH_TIMEX_H + +#include <mach/hardware.h> + +#if defined(CONFIG_ARCH_AT91RM9200) + +#define CLOCK_TICK_RATE (AT91_SLOW_CLOCK) + +#elif defined(CONFIG_ARCH_AT91SAM9260) + +#if defined(CONFIG_MACH_USB_A9260) || defined(CONFIG_MACH_QIL_A9260) +#define AT91SAM9_MASTER_CLOCK 90000000 +#else +#define AT91SAM9_MASTER_CLOCK 99300000 +#endif + +#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16) + +#elif defined(CONFIG_ARCH_AT91SAM9261) + +#define AT91SAM9_MASTER_CLOCK 99300000 +#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16) + +#elif defined(CONFIG_ARCH_AT91SAM9263) + +#if defined(CONFIG_MACH_USB_A9263) +#define AT91SAM9_MASTER_CLOCK 90000000 +#else +#define AT91SAM9_MASTER_CLOCK 99959500 +#endif + +#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16) + +#elif defined(CONFIG_ARCH_AT91SAM9RL) + +#define AT91SAM9_MASTER_CLOCK 100000000 +#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16) + +#elif defined(CONFIG_ARCH_AT91SAM9G20) + +#define AT91SAM9_MASTER_CLOCK 132096000 +#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16) + +#elif defined(CONFIG_ARCH_AT91CAP9) + +#define AT91CAP9_MASTER_CLOCK 100000000 +#define CLOCK_TICK_RATE (AT91CAP9_MASTER_CLOCK/16) + +#elif defined(CONFIG_ARCH_AT91X40) + +#define AT91X40_MASTER_CLOCK 40000000 +#define CLOCK_TICK_RATE (AT91X40_MASTER_CLOCK) + +#endif + +#endif diff --git a/arch/arm/mach-at91/include/mach/uncompress.h b/arch/arm/mach-at91/include/mach/uncompress.h new file mode 100644 index 00000000000..0410d548e9b --- /dev/null +++ b/arch/arm/mach-at91/include/mach/uncompress.h @@ -0,0 +1,76 @@ +/* + * arch/arm/mach-at91/include/mach/uncompress.h + * + * Copyright (C) 2003 SAN People + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __ASM_ARCH_UNCOMPRESS_H +#define __ASM_ARCH_UNCOMPRESS_H + +#include <asm/io.h> +#include <linux/atmel_serial.h> + +#if defined(CONFIG_AT91_EARLY_DBGU) +#define UART_OFFSET (AT91_DBGU + AT91_BASE_SYS) +#elif defined(CONFIG_AT91_EARLY_USART0) +#define UART_OFFSET AT91_USART0 +#elif defined(CONFIG_AT91_EARLY_USART1) +#define UART_OFFSET AT91_USART1 +#elif defined(CONFIG_AT91_EARLY_USART2) +#define UART_OFFSET AT91_USART2 +#elif defined(CONFIG_AT91_EARLY_USART3) +#define UART_OFFSET AT91_USART3 +#elif defined(CONFIG_AT91_EARLY_USART4) +#define UART_OFFSET AT91_USART4 +#elif defined(CONFIG_AT91_EARLY_USART5) +#define UART_OFFSET AT91_USART5 +#endif + +/* + * The following code assumes the serial port has already been + * initialized by the bootloader. If you didn't setup a port in + * your bootloader then nothing will appear (which might be desired). + * + * This does not append a newline + */ +static void putc(int c) +{ +#ifdef UART_OFFSET + void __iomem *sys = (void __iomem *) UART_OFFSET; /* physical address */ + + while (!(__raw_readl(sys + ATMEL_US_CSR) & ATMEL_US_TXRDY)) + barrier(); + __raw_writel(c, sys + ATMEL_US_THR); +#endif +} + +static inline void flush(void) +{ +#ifdef UART_OFFSET + void __iomem *sys = (void __iomem *) UART_OFFSET; /* physical address */ + + /* wait for transmission to complete */ + while (!(__raw_readl(sys + ATMEL_US_CSR) & ATMEL_US_TXEMPTY)) + barrier(); +#endif +} + +#define arch_decomp_setup() + +#define arch_decomp_wdog() + +#endif diff --git a/arch/arm/mach-at91/include/mach/vmalloc.h b/arch/arm/mach-at91/include/mach/vmalloc.h new file mode 100644 index 00000000000..8eb459f3f5b --- /dev/null +++ b/arch/arm/mach-at91/include/mach/vmalloc.h @@ -0,0 +1,26 @@ +/* + * arch/arm/mach-at91/include/mach/vmalloc.h + * + * Copyright (C) 2003 SAN People + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __ASM_ARCH_VMALLOC_H +#define __ASM_ARCH_VMALLOC_H + +#define VMALLOC_END (AT91_VIRT_BASE & PGDIR_MASK) + +#endif diff --git a/arch/arm/mach-at91/irq.c b/arch/arm/mach-at91/irq.c index a1bfc12a0c2..da3494a5342 100644 --- a/arch/arm/mach-at91/irq.c +++ b/arch/arm/mach-at91/irq.c @@ -25,7 +25,7 @@ #include <linux/mm.h> #include <linux/types.h> -#include <asm/arch/hardware.h> +#include <mach/hardware.h> #include <asm/irq.h> #include <asm/setup.h> diff --git a/arch/arm/mach-at91/leds.c b/arch/arm/mach-at91/leds.c index f064b7acb01..fec03c59ff9 100644 --- a/arch/arm/mach-at91/leds.c +++ b/arch/arm/mach-at91/leds.c @@ -13,8 +13,8 @@ #include <linux/module.h> #include <linux/init.h> -#include <asm/arch/board.h> -#include <asm/arch/gpio.h> +#include <mach/board.h> +#include <mach/gpio.h> /* ------------------------------------------------------------------------- */ diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index a5cfe866c9d..ec2fe4ca1e2 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -24,14 +24,14 @@ #include <asm/mach/time.h> #include <asm/mach/irq.h> -#include <asm/arch/at91_pmc.h> -#include <asm/arch/gpio.h> -#include <asm/arch/cpu.h> +#include <mach/at91_pmc.h> +#include <mach/gpio.h> +#include <mach/cpu.h> #include "generic.h" #ifdef CONFIG_ARCH_AT91RM9200 -#include <asm/arch/at91rm9200_mc.h> +#include <mach/at91rm9200_mc.h> /* * The AT91RM9200 goes into self-refresh mode with this command, and will @@ -41,7 +41,7 @@ #define sdram_selfrefresh_disable() do {} while (0) #elif defined(CONFIG_ARCH_AT91CAP9) -#include <asm/arch/at91cap9_ddrsdr.h> +#include <mach/at91cap9_ddrsdr.h> static u32 saved_lpr; @@ -58,7 +58,7 @@ static inline void sdram_selfrefresh_enable(void) #define sdram_selfrefresh_disable() at91_sys_write(AT91_DDRSDRC_LPR, saved_lpr) #else -#include <asm/arch/at91sam9_sdramc.h> +#include <mach/at91sam9_sdramc.h> #ifdef CONFIG_ARCH_AT91SAM9263 /* @@ -91,8 +91,8 @@ static inline void sdram_selfrefresh_enable(void) */ #if defined(AT91_SHDWC) -#include <asm/arch/at91_rstc.h> -#include <asm/arch/at91_shdwc.h> +#include <mach/at91_rstc.h> +#include <mach/at91_shdwc.h> static void __init show_reset_status(void) { |