[ARM] 3623/1: pnx4008: move GPIO-related defines to gpio.h

Patch from Vitaly Wool

This patch moves GPIO-related defines and static inline funcs from include/asm-arm/arch-pnx4008/pm.h to include/asm-arm/arch-pnx4008/gpio.h.
Also, some more GPIO-related defines are added to include/asm-arm/arch-pnx4008/gpio.h as they are needed for the USB host driver (coming soon...)

Signed-off-by: Vitaly Wool <vwool@ru.mvista.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

2 files changed, 102 insertions, 29 deletions

diff --git a/include/asm-arm/arch-pnx4008/gpio.h b/include/asm-arm/arch-pnx4008/gpio.h
index 1fa5a77c301..d01bf83d55c 100644
--- a/include/asm-arm/arch-pnx4008/gpio.h
+++ b/include/asm-arm/arch-pnx4008/gpio.h
@@ -127,6 +127,79 @@
 #define GPIO_ISOUT(K) ((GPIO_TYPE_MASK(K) == GPIO_OUT) && (GPIO_BIT(K) & GPIO_OUT_MASK))
 #define GPIO_ISIN(K)  ((GPIO_TYPE_MASK(K) == GPIO_IN) && (GPIO_BIT(K) & GPIO_IN_MASK))
 
+/* Start Enable Pin Interrupts - table 58 page 66 */
+
+#define SE_PIN_BASE_INT   32
+
+#define SE_U7_RX_INT            63
+#define SE_U7_HCTS_INT          62
+#define SE_BT_CLKREQ_INT        61
+#define SE_U6_IRRX_INT          60
+/*59 unused*/
+#define SE_U5_RX_INT            58
+#define SE_GPI_11_INT           57
+#define SE_U3_RX_INT            56
+#define SE_U2_HCTS_INT          55
+#define SE_U2_RX_INT            54
+#define SE_U1_RX_INT            53
+#define SE_DISP_SYNC_INT        52
+/*51 unused*/
+#define SE_SDIO_INT_N           50
+#define SE_MSDIO_START_INT      49
+#define SE_GPI_06_INT           48
+#define SE_GPI_05_INT           47
+#define SE_GPI_04_INT           46
+#define SE_GPI_03_INT           45
+#define SE_GPI_02_INT           44
+#define SE_GPI_01_INT           43
+#define SE_GPI_00_INT           42
+#define SE_SYSCLKEN_PIN_INT     41
+#define SE_SPI1_DATAIN_INT      40
+#define SE_GPI_07_INT           39
+#define SE_SPI2_DATAIN_INT      38
+#define SE_GPI_10_INT           37
+#define SE_GPI_09_INT           36
+#define SE_GPI_08_INT           35
+/*34-32 unused*/
+
+/* Start Enable Internal Interrupts - table 57 page 65 */
+
+#define SE_INT_BASE_INT   0
+
+#define SE_TS_IRQ               31
+#define SE_TS_P_INT             30
+#define SE_TS_AUX_INT           29
+/*27-28 unused*/
+#define SE_USB_AHB_NEED_CLK_INT 26
+#define SE_MSTIMER_INT          25
+#define SE_RTC_INT              24
+#define SE_USB_NEED_CLK_INT     23
+#define SE_USB_INT              22
+#define SE_USB_I2C_INT          21
+#define SE_USB_OTG_TIMER_INT    20
+#define SE_USB_OTG_ATX_INT_N    19
+/*18 unused*/
+#define SE_DSP_GPIO4_INT        17
+#define SE_KEY_IRQ              16
+#define SE_DSP_SLAVEPORT_INT    15
+#define SE_DSP_GPIO1_INT        14
+#define SE_DSP_GPIO0_INT        13
+#define SE_DSP_AHB_INT          12
+/*11-6 unused*/
+#define SE_GPIO_05_INT          5
+#define SE_GPIO_04_INT          4
+#define SE_GPIO_03_INT          3
+#define SE_GPIO_02_INT          2
+#define SE_GPIO_01_INT          1
+#define SE_GPIO_00_INT          0
+
+#define START_INT_REG_BIT(irq) (1<<((irq)&0x1F))
+
+#define START_INT_ER_REG(irq)     IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x20 + (((irq)&(0x1<<5))>>1)))
+#define START_INT_RSR_REG(irq)    IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x24 + (((irq)&(0x1<<5))>>1)))
+#define START_INT_SR_REG(irq)     IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x28 + (((irq)&(0x1<<5))>>1)))
+#define START_INT_APR_REG(irq)    IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x2C + (((irq)&(0x1<<5))>>1)))
+
 extern int pnx4008_gpio_register_pin(unsigned short pin);
 extern int pnx4008_gpio_unregister_pin(unsigned short pin);
 extern unsigned long pnx4008_gpio_read_pin(unsigned short pin);
@@ -136,4 +209,33 @@ extern int pnx4008_gpio_read_pin_direction(unsigned short pin);
 extern int pnx4008_gpio_set_pin_mux(unsigned short pin, int output);
 extern int pnx4008_gpio_read_pin_mux(unsigned short pin);
 
+static inline void start_int_umask(u8 irq)
+{
+	__raw_writel(__raw_readl(START_INT_ER_REG(irq)) |
+		     START_INT_REG_BIT(irq), START_INT_ER_REG(irq));
+}
+
+static inline void start_int_mask(u8 irq)
+{
+	__raw_writel(__raw_readl(START_INT_ER_REG(irq)) &
+		     ~START_INT_REG_BIT(irq), START_INT_ER_REG(irq));
+}
+
+static inline void start_int_ack(u8 irq)
+{
+	__raw_writel(START_INT_REG_BIT(irq), START_INT_RSR_REG(irq));
+}
+
+static inline void start_int_set_falling_edge(u8 irq)
+{
+	__raw_writel(__raw_readl(START_INT_APR_REG(irq)) &
+		     ~START_INT_REG_BIT(irq), START_INT_APR_REG(irq));
+}
+
+static inline void start_int_set_rising_edge(u8 irq)
+{
+	__raw_writel(__raw_readl(START_INT_APR_REG(irq)) |
+		     START_INT_REG_BIT(irq), START_INT_APR_REG(irq));
+}
+
 #endif				/* _PNX4008_GPIO_H_ */
diff --git a/include/asm-arm/arch-pnx4008/pm.h b/include/asm-arm/arch-pnx4008/pm.h
index c660486670f..bac1634cb3e 100644
--- a/include/asm-arm/arch-pnx4008/pm.h
+++ b/include/asm-arm/arch-pnx4008/pm.h
@@ -29,34 +29,5 @@ extern void pnx4008_cpu_standby(void);
 extern int pnx4008_startup_pll(struct clk *);
 extern int pnx4008_shutdown_pll(struct clk *);
 
-static inline void start_int_umask(u8 irq)
-{
-	__raw_writel(__raw_readl(START_INT_ER_REG(irq)) |
-		     START_INT_REG_BIT(irq), START_INT_ER_REG(irq));
-}
-
-static inline void start_int_mask(u8 irq)
-{
-	__raw_writel(__raw_readl(START_INT_ER_REG(irq)) &
-		     ~START_INT_REG_BIT(irq), START_INT_ER_REG(irq));
-}
-
-static inline void start_int_ack(u8 irq)
-{
-	__raw_writel(START_INT_REG_BIT(irq), START_INT_RSR_REG(irq));
-}
-
-static inline void start_int_set_falling_edge(u8 irq)
-{
-	__raw_writel(__raw_readl(START_INT_APR_REG(irq)) &
-		     ~START_INT_REG_BIT(irq), START_INT_APR_REG(irq));
-}
-
-static inline void start_int_set_rising_edge(u8 irq)
-{
-	__raw_writel(__raw_readl(START_INT_APR_REG(irq)) |
-		     START_INT_REG_BIT(irq), START_INT_APR_REG(irq));
-}
-
 #endif				/* ASSEMBLER */
 #endif				/* __ASM_ARCH_PNX4008_PM_H */