sh: migrate to arch/sh/include/

This follows the sparc changes a439fe51a1f8eb087c22dd24d69cebae4a3addac.

Most of the moving about was done with Sam's directions at:

http://marc.info/?l=linux-sh&m=121724823706062&w=2

with subsequent hacking and fixups entirely my fault.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

1 files changed, 0 insertions, 70 deletions

diff --git a/include/asm-sh/rts7751r2d.h b/include/asm-sh/rts7751r2d.h
deleted file mode 100644
index 0a800157b82..00000000000
--- a/include/asm-sh/rts7751r2d.h
+++ /dev/null
@@ -1,70 +0,0 @@
-#ifndef __ASM_SH_RENESAS_RTS7751R2D_H
-#define __ASM_SH_RENESAS_RTS7751R2D_H
-
-/*
- * linux/include/asm-sh/renesas_rts7751r2d.h
- *
- * Copyright (C) 2000  Atom Create Engineering Co., Ltd.
- *
- * Renesas Technology Sales RTS7751R2D support
- */
-
-/* Board specific addresses.  */
-
-#define PA_BCR		0xa4000000	/* FPGA */
-#define PA_IRLMON	0xa4000002	/* Interrupt Status control */
-#define PA_CFCTL	0xa4000004	/* CF Timing control */
-#define PA_CFPOW	0xa4000006	/* CF Power control */
-#define PA_DISPCTL	0xa4000008	/* Display Timing control */
-#define PA_SDMPOW	0xa400000a	/* SD Power control */
-#define PA_RTCCE	0xa400000c	/* RTC(9701) Enable control */
-#define PA_PCICD	0xa400000e	/* PCI Extention detect control */
-#define PA_VOYAGERRTS	0xa4000020	/* VOYAGER Reset control */
-
-#define PA_R2D1_AXRST		0xa4000022	/* AX_LAN Reset control */
-#define PA_R2D1_CFRST		0xa4000024	/* CF Reset control */
-#define PA_R2D1_ADMRTS		0xa4000026	/* SD Reset control */
-#define PA_R2D1_EXTRST		0xa4000028	/* Extention Reset control */
-#define PA_R2D1_CFCDINTCLR	0xa400002a	/* CF Insert Interrupt clear */
-
-#define PA_R2DPLUS_CFRST	0xa4000022	/* CF Reset control */
-#define PA_R2DPLUS_ADMRTS	0xa4000024	/* SD Reset control */
-#define PA_R2DPLUS_EXTRST	0xa4000026	/* Extention Reset control */
-#define PA_R2DPLUS_CFCDINTCLR	0xa4000028	/* CF Insert Interrupt clear */
-#define PA_R2DPLUS_KEYCTLCLR	0xa400002a	/* Key Interrupt clear */
-
-#define PA_POWOFF	0xa4000030	/* Board Power OFF control */
-#define PA_VERREG	0xa4000032	/* FPGA Version Register */
-#define PA_INPORT	0xa4000034	/* KEY Input Port control */
-#define PA_OUTPORT	0xa4000036	/* LED control */
-#define PA_BVERREG	0xa4000038	/* Board Revision Register */
-
-#define PA_AX88796L	0xaa000400	/* AX88796L Area */
-#define PA_VOYAGER	0xab000000	/* VOYAGER GX Area */
-#define PA_IDE_OFFSET	0x1f0		/* CF IDE Offset */
-#define AX88796L_IO_BASE	0x1000	/* AX88796L IO Base Address */
-
-#define IRLCNTR1	(PA_BCR + 0)	/* Interrupt Control Register1 */
-
-#define R2D_FPGA_IRQ_BASE	100
-
-#define IRQ_VOYAGER		(R2D_FPGA_IRQ_BASE + 0)
-#define IRQ_EXT			(R2D_FPGA_IRQ_BASE + 1)
-#define IRQ_TP			(R2D_FPGA_IRQ_BASE + 2)
-#define IRQ_RTC_T		(R2D_FPGA_IRQ_BASE + 3)
-#define IRQ_RTC_A		(R2D_FPGA_IRQ_BASE + 4)
-#define IRQ_SDCARD		(R2D_FPGA_IRQ_BASE + 5)
-#define IRQ_CF_CD		(R2D_FPGA_IRQ_BASE + 6)
-#define IRQ_CF_IDE		(R2D_FPGA_IRQ_BASE + 7)
-#define IRQ_AX88796		(R2D_FPGA_IRQ_BASE + 8)
-#define IRQ_KEY			(R2D_FPGA_IRQ_BASE + 9)
-#define IRQ_PCI_INTA		(R2D_FPGA_IRQ_BASE + 10)
-#define IRQ_PCI_INTB		(R2D_FPGA_IRQ_BASE + 11)
-#define IRQ_PCI_INTC		(R2D_FPGA_IRQ_BASE + 12)
-#define IRQ_PCI_INTD		(R2D_FPGA_IRQ_BASE + 13)
-
-/* arch/sh/boards/renesas/rts7751r2d/irq.c */
-void init_rts7751r2d_IRQ(void);
-int rts7751r2d_irq_demux(int);
-
-#endif  /* __ASM_SH_RENESAS_RTS7751R2D */