Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 530 insertions, 0 deletions

diff --git a/drivers/acpi/executer/exprep.c b/drivers/acpi/executer/exprep.c
new file mode 100644
index 00000000000..264ef3bba31
--- /dev/null
+++ b/drivers/acpi/executer/exprep.c
@@ -0,0 +1,530 @@
+
+/******************************************************************************
+ *
+ * Module Name: exprep - ACPI AML (p-code) execution - field prep utilities
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2005, R. Byron Moore
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+
+#include <acpi/acpi.h>
+#include <acpi/acinterp.h>
+#include <acpi/amlcode.h>
+#include <acpi/acnamesp.h>
+
+
+#define _COMPONENT          ACPI_EXECUTER
+	 ACPI_MODULE_NAME    ("exprep")
+
+
+#ifdef ACPI_UNDER_DEVELOPMENT
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_generate_access
+ *
+ * PARAMETERS:  field_bit_offset    - Start of field within parent region/buffer
+ *              field_bit_length    - Length of field in bits
+ *              region_length       - Length of parent in bytes
+ *
+ * RETURN:      Field granularity (8, 16, 32 or 64) and
+ *              byte_alignment (1, 2, 3, or 4)
+ *
+ * DESCRIPTION: Generate an optimal access width for fields defined with the
+ *              any_acc keyword.
+ *
+ * NOTE: Need to have the region_length in order to check for boundary
+ *       conditions (end-of-region).  However, the region_length is a deferred
+ *       operation.  Therefore, to complete this implementation, the generation
+ *       of this access width must be deferred until the region length has
+ *       been evaluated.
+ *
+ ******************************************************************************/
+
+static u32
+acpi_ex_generate_access (
+	u32                             field_bit_offset,
+	u32                             field_bit_length,
+	u32                             region_length)
+{
+	u32                             field_byte_length;
+	u32                             field_byte_offset;
+	u32                             field_byte_end_offset;
+	u32                             access_byte_width;
+	u32                             field_start_offset;
+	u32                             field_end_offset;
+	u32                             minimum_access_width = 0xFFFFFFFF;
+	u32                             minimum_accesses = 0xFFFFFFFF;
+	u32                             accesses;
+
+
+	ACPI_FUNCTION_TRACE ("ex_generate_access");
+
+
+	/* Round Field start offset and length to "minimal" byte boundaries */
+
+	field_byte_offset  = ACPI_DIV_8 (ACPI_ROUND_DOWN (field_bit_offset, 8));
+	field_byte_end_offset = ACPI_DIV_8 (ACPI_ROUND_UP (field_bit_length + field_bit_offset, 8));
+	field_byte_length  = field_byte_end_offset - field_byte_offset;
+
+	ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD,
+			"Bit length %d, Bit offset %d\n",
+			field_bit_length, field_bit_offset));
+	ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD,
+			"Byte Length %d, Byte Offset %d, End Offset %d\n",
+			field_byte_length, field_byte_offset, field_byte_end_offset));
+
+	/*
+	 * Iterative search for the maximum access width that is both aligned
+	 * and does not go beyond the end of the region
+	 *
+	 * Start at byte_acc and work upwards to qword_acc max. (1,2,4,8 bytes)
+	 */
+	for (access_byte_width = 1; access_byte_width <= 8; access_byte_width <<= 1) {
+		/*
+		 * 1) Round end offset up to next access boundary and make sure that this
+		 *    does not go beyond the end of the parent region.
+		 * 2) When the Access width is greater than the field_byte_length, we are done.
+		 *    (This does not optimize for the perfectly aligned case yet).
+		 */
+		if (ACPI_ROUND_UP (field_byte_end_offset, access_byte_width) <= region_length) {
+			field_start_offset = ACPI_ROUND_DOWN (field_byte_offset, access_byte_width) /
+					  access_byte_width;
+			field_end_offset = ACPI_ROUND_UP   ((field_byte_length + field_byte_offset),
+					  access_byte_width) / access_byte_width;
+			accesses         = field_end_offset - field_start_offset;
+
+			ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD,
+					"access_width %d end is within region\n", access_byte_width));
+			ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD,
+					"Field Start %d, Field End %d -- requires %d accesses\n",
+					field_start_offset, field_end_offset, accesses));
+
+			/* Single access is optimal */
+
+			if (accesses <= 1) {
+				ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD,
+						"Entire field can be accessed with one operation of size %d\n",
+						access_byte_width));
+				return_VALUE (access_byte_width);
+			}
+
+			/*
+			 * Fits in the region, but requires more than one read/write.
+			 * try the next wider access on next iteration
+			 */
+			if (accesses < minimum_accesses) {
+				minimum_accesses   = accesses;
+				minimum_access_width = access_byte_width;
+			}
+		}
+		else {
+			ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD,
+					"access_width %d end is NOT within region\n", access_byte_width));
+			if (access_byte_width == 1) {
+				ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD,
+						"Field goes beyond end-of-region!\n"));
+				return_VALUE (0);     /* Field does not fit in the region at all */
+			}
+
+			/* This width goes beyond the end-of-region, back off to previous access */
+
+			ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD,
+					"Backing off to previous optimal access width of %d\n",
+					minimum_access_width));
+			return_VALUE (minimum_access_width);
+		}
+	}
+
+	/* Could not read/write field with one operation, just use max access width */
+
+	ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD,
+			"Cannot access field in one operation, using width 8\n"));
+	return_VALUE (8);
+}
+#endif /* ACPI_UNDER_DEVELOPMENT */
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_decode_field_access
+ *
+ * PARAMETERS:  Access          - Encoded field access bits
+ *              Length          - Field length.
+ *
+ * RETURN:      Field granularity (8, 16, 32 or 64) and
+ *              byte_alignment (1, 2, 3, or 4)
+ *
+ * DESCRIPTION: Decode the access_type bits of a field definition.
+ *
+ ******************************************************************************/
+
+static u32
+acpi_ex_decode_field_access (
+	union acpi_operand_object       *obj_desc,
+	u8                              field_flags,
+	u32                             *return_byte_alignment)
+{
+	u32                             access;
+	u32                             byte_alignment;
+	u32                             bit_length;
+
+
+	ACPI_FUNCTION_TRACE ("ex_decode_field_access");
+
+
+	access = (field_flags & AML_FIELD_ACCESS_TYPE_MASK);
+
+	switch (access) {
+	case AML_FIELD_ACCESS_ANY:
+
+#ifdef ACPI_UNDER_DEVELOPMENT
+		byte_alignment = acpi_ex_generate_access (obj_desc->common_field.start_field_bit_offset,
+				 obj_desc->common_field.bit_length,
+				 0xFFFFFFFF /* Temp until we pass region_length as param */);
+		bit_length = byte_alignment * 8;
+#endif
+
+		byte_alignment = 1;
+		bit_length = 8;
+		break;
+
+	case AML_FIELD_ACCESS_BYTE:
+	case AML_FIELD_ACCESS_BUFFER:   /* ACPI 2.0 (SMBus Buffer) */
+		byte_alignment = 1;
+		bit_length    = 8;
+		break;
+
+	case AML_FIELD_ACCESS_WORD:
+		byte_alignment = 2;
+		bit_length    = 16;
+		break;
+
+	case AML_FIELD_ACCESS_DWORD:
+		byte_alignment = 4;
+		bit_length    = 32;
+		break;
+
+	case AML_FIELD_ACCESS_QWORD:    /* ACPI 2.0 */
+		byte_alignment = 8;
+		bit_length    = 64;
+		break;
+
+	default:
+		/* Invalid field access type */
+
+		ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
+			"Unknown field access type %X\n",
+			access));
+		return_VALUE (0);
+	}
+
+	if (ACPI_GET_OBJECT_TYPE (obj_desc) == ACPI_TYPE_BUFFER_FIELD) {
+		/*
+		 * buffer_field access can be on any byte boundary, so the
+		 * byte_alignment is always 1 byte -- regardless of any byte_alignment
+		 * implied by the field access type.
+		 */
+		byte_alignment = 1;
+	}
+
+	*return_byte_alignment = byte_alignment;
+	return_VALUE (bit_length);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_prep_common_field_object
+ *
+ * PARAMETERS:  obj_desc            - The field object
+ *              field_flags         - Access, lock_rule, and update_rule.
+ *                                    The format of a field_flag is described
+ *                                    in the ACPI specification
+ *              field_bit_position  - Field start position
+ *              field_bit_length    - Field length in number of bits
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Initialize the areas of the field object that are common
+ *              to the various types of fields.  Note: This is very "sensitive"
+ *              code because we are solving the general case for field
+ *              alignment.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_prep_common_field_object (
+	union acpi_operand_object       *obj_desc,
+	u8                              field_flags,
+	u8                              field_attribute,
+	u32                             field_bit_position,
+	u32                             field_bit_length)
+{
+	u32                             access_bit_width;
+	u32                             byte_alignment;
+	u32                             nearest_byte_address;
+
+
+	ACPI_FUNCTION_TRACE ("ex_prep_common_field_object");
+
+
+	/*
+	 * Note: the structure being initialized is the
+	 * ACPI_COMMON_FIELD_INFO;  No structure fields outside of the common
+	 * area are initialized by this procedure.
+	 */
+	obj_desc->common_field.field_flags = field_flags;
+	obj_desc->common_field.attribute = field_attribute;
+	obj_desc->common_field.bit_length = field_bit_length;
+
+	/*
+	 * Decode the access type so we can compute offsets.  The access type gives
+	 * two pieces of information - the width of each field access and the
+	 * necessary byte_alignment (address granularity) of the access.
+	 *
+	 * For any_acc, the access_bit_width is the largest width that is both
+	 * necessary and possible in an attempt to access the whole field in one
+	 * I/O operation.  However, for any_acc, the byte_alignment is always one
+	 * byte.
+	 *
+	 * For all Buffer Fields, the byte_alignment is always one byte.
+	 *
+	 * For all other access types (Byte, Word, Dword, Qword), the Bitwidth is
+	 * the same (equivalent) as the byte_alignment.
+	 */
+	access_bit_width = acpi_ex_decode_field_access (obj_desc, field_flags,
+			  &byte_alignment);
+	if (!access_bit_width) {
+		return_ACPI_STATUS (AE_AML_OPERAND_VALUE);
+	}
+
+	/* Setup width (access granularity) fields */
+
+	obj_desc->common_field.access_byte_width = (u8)
+			ACPI_DIV_8 (access_bit_width); /* 1, 2, 4,  8 */
+
+	obj_desc->common_field.access_bit_width = (u8) access_bit_width;
+
+	/*
+	 * base_byte_offset is the address of the start of the field within the
+	 * region.  It is the byte address of the first *datum* (field-width data
+	 * unit) of the field. (i.e., the first datum that contains at least the
+	 * first *bit* of the field.)
+	 *
+	 * Note: byte_alignment is always either equal to the access_bit_width or 8
+	 * (Byte access), and it defines the addressing granularity of the parent
+	 * region or buffer.
+	 */
+	nearest_byte_address =
+			ACPI_ROUND_BITS_DOWN_TO_BYTES (field_bit_position);
+	obj_desc->common_field.base_byte_offset = (u32)
+			ACPI_ROUND_DOWN (nearest_byte_address, byte_alignment);
+
+	/*
+	 * start_field_bit_offset is the offset of the first bit of the field within
+	 * a field datum.
+	 */
+	obj_desc->common_field.start_field_bit_offset = (u8)
+		(field_bit_position - ACPI_MUL_8 (obj_desc->common_field.base_byte_offset));
+
+	/*
+	 * Does the entire field fit within a single field access element? (datum)
+	 * (i.e., without crossing a datum boundary)
+	 */
+	if ((obj_desc->common_field.start_field_bit_offset + field_bit_length) <=
+			(u16) access_bit_width) {
+		obj_desc->common.flags |= AOPOBJ_SINGLE_DATUM;
+	}
+
+	return_ACPI_STATUS (AE_OK);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_prep_field_value
+ *
+ * PARAMETERS:  Node                - Owning Node
+ *              region_node         - Region in which field is being defined
+ *              field_flags         - Access, lock_rule, and update_rule.
+ *              field_bit_position  - Field start position
+ *              field_bit_length    - Field length in number of bits
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Construct an union acpi_operand_object of type def_field and
+ *              connect it to the parent Node.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_prep_field_value (
+	struct acpi_create_field_info   *info)
+{
+	union acpi_operand_object       *obj_desc;
+	u32                             type;
+	acpi_status                     status;
+
+
+	ACPI_FUNCTION_TRACE ("ex_prep_field_value");
+
+
+	/* Parameter validation */
+
+	if (info->field_type != ACPI_TYPE_LOCAL_INDEX_FIELD) {
+		if (!info->region_node) {
+			ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "Null region_node\n"));
+			return_ACPI_STATUS (AE_AML_NO_OPERAND);
+		}
+
+		type = acpi_ns_get_type (info->region_node);
+		if (type != ACPI_TYPE_REGION) {
+			ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
+				"Needed Region, found type %X (%s)\n",
+				type, acpi_ut_get_type_name (type)));
+
+			return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
+		}
+	}
+
+	/* Allocate a new field object */
+
+	obj_desc = acpi_ut_create_internal_object (info->field_type);
+	if (!obj_desc) {
+		return_ACPI_STATUS (AE_NO_MEMORY);
+	}
+
+	/* Initialize areas of the object that are common to all fields */
+
+	obj_desc->common_field.node = info->field_node;
+	status = acpi_ex_prep_common_field_object (obj_desc, info->field_flags,
+			 info->attribute, info->field_bit_position, info->field_bit_length);
+	if (ACPI_FAILURE (status)) {
+		acpi_ut_delete_object_desc (obj_desc);
+		return_ACPI_STATUS (status);
+	}
+
+	/* Initialize areas of the object that are specific to the field type */
+
+	switch (info->field_type) {
+	case ACPI_TYPE_LOCAL_REGION_FIELD:
+
+		obj_desc->field.region_obj   = acpi_ns_get_attached_object (info->region_node);
+
+		/* An additional reference for the container */
+
+		acpi_ut_add_reference (obj_desc->field.region_obj);
+
+		ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD,
+			"region_field: bit_off %X, Off %X, Gran %X, Region %p\n",
+			obj_desc->field.start_field_bit_offset, obj_desc->field.base_byte_offset,
+			obj_desc->field.access_byte_width, obj_desc->field.region_obj));
+		break;
+
+
+	case ACPI_TYPE_LOCAL_BANK_FIELD:
+
+		obj_desc->bank_field.value   = info->bank_value;
+		obj_desc->bank_field.region_obj = acpi_ns_get_attached_object (info->region_node);
+		obj_desc->bank_field.bank_obj = acpi_ns_get_attached_object (info->register_node);
+
+		/* An additional reference for the attached objects */
+
+		acpi_ut_add_reference (obj_desc->bank_field.region_obj);
+		acpi_ut_add_reference (obj_desc->bank_field.bank_obj);
+
+		ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD,
+			"Bank Field: bit_off %X, Off %X, Gran %X, Region %p, bank_reg %p\n",
+			obj_desc->bank_field.start_field_bit_offset,
+			obj_desc->bank_field.base_byte_offset,
+			obj_desc->field.access_byte_width,
+			obj_desc->bank_field.region_obj,
+			obj_desc->bank_field.bank_obj));
+		break;
+
+
+	case ACPI_TYPE_LOCAL_INDEX_FIELD:
+
+		obj_desc->index_field.index_obj = acpi_ns_get_attached_object (info->register_node);
+		obj_desc->index_field.data_obj = acpi_ns_get_attached_object (info->data_register_node);
+		obj_desc->index_field.value  = (u32)
+			(info->field_bit_position / ACPI_MUL_8 (obj_desc->field.access_byte_width));
+
+		if (!obj_desc->index_field.data_obj || !obj_desc->index_field.index_obj) {
+			ACPI_REPORT_ERROR (("Null Index Object during field prep\n"));
+			acpi_ut_delete_object_desc (obj_desc);
+			return_ACPI_STATUS (AE_AML_INTERNAL);
+		}
+
+		/* An additional reference for the attached objects */
+
+		acpi_ut_add_reference (obj_desc->index_field.data_obj);
+		acpi_ut_add_reference (obj_desc->index_field.index_obj);
+
+		ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD,
+			"index_field: bit_off %X, Off %X, Value %X, Gran %X, Index %p, Data %p\n",
+			obj_desc->index_field.start_field_bit_offset,
+			obj_desc->index_field.base_byte_offset,
+			obj_desc->index_field.value,
+			obj_desc->field.access_byte_width,
+			obj_desc->index_field.index_obj,
+			obj_desc->index_field.data_obj));
+		break;
+
+	default:
+		/* No other types should get here */
+		break;
+	}
+
+	/*
+	 * Store the constructed descriptor (obj_desc) into the parent Node,
+	 * preserving the current type of that named_obj.
+	 */
+	status = acpi_ns_attach_object (info->field_node, obj_desc,
+			  acpi_ns_get_type (info->field_node));
+
+	ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD, "Set named_obj %p [%4.4s], obj_desc %p\n",
+			info->field_node, acpi_ut_get_node_name (info->field_node), obj_desc));
+
+	/* Remove local reference to the object */
+
+	acpi_ut_remove_reference (obj_desc);
+	return_ACPI_STATUS (status);
+}
+