Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

12 files changed, 7726 insertions, 0 deletions

diff --git a/drivers/acpi/dispatcher/Makefile b/drivers/acpi/dispatcher/Makefile
new file mode 100644
index 00000000000..eb7e602a83c
--- /dev/null
+++ b/drivers/acpi/dispatcher/Makefile
@@ -0,0 +1,9 @@
+#
+# Makefile for all Linux ACPI interpreter subdirectories
+#
+
+obj-y := dsfield.o   dsmthdat.o  dsopcode.o  dswexec.o  dswscope.o \
+	 dsmethod.o  dsobject.o  dsutils.o   dswload.o  dswstate.o \
+	 dsinit.o
+
+EXTRA_CFLAGS += $(ACPI_CFLAGS)
diff --git a/drivers/acpi/dispatcher/dsfield.c b/drivers/acpi/dispatcher/dsfield.c
new file mode 100644
index 00000000000..2779211be75
--- /dev/null
+++ b/drivers/acpi/dispatcher/dsfield.c
@@ -0,0 +1,601 @@
+/******************************************************************************
+ *
+ * Module Name: dsfield - Dispatcher field routines
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2005, R. Byron Moore
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+
+#include <acpi/acpi.h>
+#include <acpi/amlcode.h>
+#include <acpi/acdispat.h>
+#include <acpi/acinterp.h>
+#include <acpi/acnamesp.h>
+#include <acpi/acparser.h>
+
+
+#define _COMPONENT          ACPI_DISPATCHER
+	 ACPI_MODULE_NAME    ("dsfield")
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_create_buffer_field
+ *
+ * PARAMETERS:  Opcode              - The opcode to be executed
+ *              Operands            - List of operands for the opcode
+ *              walk_state          - Current state
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Execute the create_field operators:
+ *              create_bit_field_op,
+ *              create_byte_field_op,
+ *              create_word_field_op,
+ *              create_dword_field_op,
+ *              create_qword_field_op,
+ *              create_field_op     (all of which define fields in buffers)
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ds_create_buffer_field (
+	union acpi_parse_object         *op,
+	struct acpi_walk_state          *walk_state)
+{
+	union acpi_parse_object         *arg;
+	struct acpi_namespace_node      *node;
+	acpi_status                     status;
+	union acpi_operand_object       *obj_desc;
+	union acpi_operand_object       *second_desc = NULL;
+	u32                             flags;
+
+
+	ACPI_FUNCTION_TRACE ("ds_create_buffer_field");
+
+
+	/* Get the name_string argument */
+
+	if (op->common.aml_opcode == AML_CREATE_FIELD_OP) {
+		arg = acpi_ps_get_arg (op, 3);
+	}
+	else {
+		/* Create Bit/Byte/Word/Dword field */
+
+		arg = acpi_ps_get_arg (op, 2);
+	}
+
+	if (!arg) {
+		return_ACPI_STATUS (AE_AML_NO_OPERAND);
+	}
+
+	if (walk_state->deferred_node) {
+		node = walk_state->deferred_node;
+		status = AE_OK;
+	}
+	else {
+		/*
+		 * During the load phase, we want to enter the name of the field into
+		 * the namespace.  During the execute phase (when we evaluate the size
+		 * operand), we want to lookup the name
+		 */
+		if (walk_state->parse_flags & ACPI_PARSE_EXECUTE) {
+			flags = ACPI_NS_NO_UPSEARCH | ACPI_NS_DONT_OPEN_SCOPE;
+		}
+		else {
+			flags = ACPI_NS_NO_UPSEARCH | ACPI_NS_DONT_OPEN_SCOPE | ACPI_NS_ERROR_IF_FOUND;
+		}
+
+		/*
+		 * Enter the name_string into the namespace
+		 */
+		status = acpi_ns_lookup (walk_state->scope_info, arg->common.value.string,
+				 ACPI_TYPE_ANY, ACPI_IMODE_LOAD_PASS1,
+				 flags, walk_state, &(node));
+		if (ACPI_FAILURE (status)) {
+			ACPI_REPORT_NSERROR (arg->common.value.string, status);
+			return_ACPI_STATUS (status);
+		}
+	}
+
+	/* We could put the returned object (Node) on the object stack for later, but
+	 * for now, we will put it in the "op" object that the parser uses, so we
+	 * can get it again at the end of this scope
+	 */
+	op->common.node = node;
+
+	/*
+	 * If there is no object attached to the node, this node was just created and
+	 * we need to create the field object.  Otherwise, this was a lookup of an
+	 * existing node and we don't want to create the field object again.
+	 */
+	obj_desc = acpi_ns_get_attached_object (node);
+	if (obj_desc) {
+		return_ACPI_STATUS (AE_OK);
+	}
+
+	/*
+	 * The Field definition is not fully parsed at this time.
+	 * (We must save the address of the AML for the buffer and index operands)
+	 */
+
+	/* Create the buffer field object */
+
+	obj_desc = acpi_ut_create_internal_object (ACPI_TYPE_BUFFER_FIELD);
+	if (!obj_desc) {
+		status = AE_NO_MEMORY;
+		goto cleanup;
+	}
+
+	/*
+	 * Remember location in AML stream of the field unit
+	 * opcode and operands -- since the buffer and index
+	 * operands must be evaluated.
+	 */
+	second_desc                 = obj_desc->common.next_object;
+	second_desc->extra.aml_start = op->named.data;
+	second_desc->extra.aml_length = op->named.length;
+	obj_desc->buffer_field.node = node;
+
+	/* Attach constructed field descriptors to parent node */
+
+	status = acpi_ns_attach_object (node, obj_desc, ACPI_TYPE_BUFFER_FIELD);
+	if (ACPI_FAILURE (status)) {
+		goto cleanup;
+	}
+
+
+cleanup:
+
+	/* Remove local reference to the object */
+
+	acpi_ut_remove_reference (obj_desc);
+	return_ACPI_STATUS (status);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_get_field_names
+ *
+ * PARAMETERS:  Info            - create_field info structure
+ *  `           walk_state      - Current method state
+ *              Arg             - First parser arg for the field name list
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Process all named fields in a field declaration.  Names are
+ *              entered into the namespace.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ds_get_field_names (
+	struct acpi_create_field_info   *info,
+	struct acpi_walk_state          *walk_state,
+	union acpi_parse_object         *arg)
+{
+	acpi_status                     status;
+	acpi_integer                    position;
+
+
+	ACPI_FUNCTION_TRACE_PTR ("ds_get_field_names", info);
+
+
+	/* First field starts at bit zero */
+
+	info->field_bit_position = 0;
+
+	/* Process all elements in the field list (of parse nodes) */
+
+	while (arg) {
+		/*
+		 * Three types of field elements are handled:
+		 * 1) Offset - specifies a bit offset
+		 * 2) access_as - changes the access mode
+		 * 3) Name - Enters a new named field into the namespace
+		 */
+		switch (arg->common.aml_opcode) {
+		case AML_INT_RESERVEDFIELD_OP:
+
+			position = (acpi_integer) info->field_bit_position
+					 + (acpi_integer) arg->common.value.size;
+
+			if (position > ACPI_UINT32_MAX) {
+				ACPI_REPORT_ERROR (("Bit offset within field too large (> 0xFFFFFFFF)\n"));
+				return_ACPI_STATUS (AE_SUPPORT);
+			}
+
+			info->field_bit_position = (u32) position;
+			break;
+
+
+		case AML_INT_ACCESSFIELD_OP:
+
+			/*
+			 * Get a new access_type and access_attribute -- to be used for all
+			 * field units that follow, until field end or another access_as keyword.
+			 *
+			 * In field_flags, preserve the flag bits other than the ACCESS_TYPE bits
+			 */
+			info->field_flags = (u8) ((info->field_flags & ~(AML_FIELD_ACCESS_TYPE_MASK)) |
+					  ((u8) ((u32) arg->common.value.integer >> 8)));
+
+			info->attribute = (u8) (arg->common.value.integer);
+			break;
+
+
+		case AML_INT_NAMEDFIELD_OP:
+
+			/* Lookup the name */
+
+			status = acpi_ns_lookup (walk_state->scope_info,
+					  (char *) &arg->named.name,
+					  info->field_type, ACPI_IMODE_EXECUTE, ACPI_NS_DONT_OPEN_SCOPE,
+					  walk_state, &info->field_node);
+			if (ACPI_FAILURE (status)) {
+				ACPI_REPORT_NSERROR ((char *) &arg->named.name, status);
+				if (status != AE_ALREADY_EXISTS) {
+					return_ACPI_STATUS (status);
+				}
+
+				/* Already exists, ignore error */
+			}
+			else {
+				arg->common.node = info->field_node;
+				info->field_bit_length = arg->common.value.size;
+
+				/* Create and initialize an object for the new Field Node */
+
+				status = acpi_ex_prep_field_value (info);
+				if (ACPI_FAILURE (status)) {
+					return_ACPI_STATUS (status);
+				}
+			}
+
+			/* Keep track of bit position for the next field */
+
+			position = (acpi_integer) info->field_bit_position
+					 + (acpi_integer) arg->common.value.size;
+
+			if (position > ACPI_UINT32_MAX) {
+				ACPI_REPORT_ERROR (("Field [%4.4s] bit offset too large (> 0xFFFFFFFF)\n",
+						(char *) &info->field_node->name));
+				return_ACPI_STATUS (AE_SUPPORT);
+			}
+
+			info->field_bit_position += info->field_bit_length;
+			break;
+
+
+		default:
+
+			ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "Invalid opcode in field list: %X\n",
+				arg->common.aml_opcode));
+			return_ACPI_STATUS (AE_AML_BAD_OPCODE);
+		}
+
+		arg = arg->common.next;
+	}
+
+	return_ACPI_STATUS (AE_OK);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_create_field
+ *
+ * PARAMETERS:  Op              - Op containing the Field definition and args
+ *              region_node     - Object for the containing Operation Region
+ *  `           walk_state      - Current method state
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Create a new field in the specified operation region
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ds_create_field (
+	union acpi_parse_object         *op,
+	struct acpi_namespace_node      *region_node,
+	struct acpi_walk_state          *walk_state)
+{
+	acpi_status                     status;
+	union acpi_parse_object         *arg;
+	struct acpi_create_field_info   info;
+
+
+	ACPI_FUNCTION_TRACE_PTR ("ds_create_field", op);
+
+
+	/* First arg is the name of the parent op_region (must already exist) */
+
+	arg = op->common.value.arg;
+	if (!region_node) {
+		status = acpi_ns_lookup (walk_state->scope_info, arg->common.value.name,
+				  ACPI_TYPE_REGION, ACPI_IMODE_EXECUTE,
+				  ACPI_NS_SEARCH_PARENT, walk_state, &region_node);
+		if (ACPI_FAILURE (status)) {
+			ACPI_REPORT_NSERROR (arg->common.value.name, status);
+			return_ACPI_STATUS (status);
+		}
+	}
+
+	/* Second arg is the field flags */
+
+	arg = arg->common.next;
+	info.field_flags = (u8) arg->common.value.integer;
+	info.attribute = 0;
+
+	/* Each remaining arg is a Named Field */
+
+	info.field_type = ACPI_TYPE_LOCAL_REGION_FIELD;
+	info.region_node = region_node;
+
+	status = acpi_ds_get_field_names (&info, walk_state, arg->common.next);
+
+	return_ACPI_STATUS (status);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_init_field_objects
+ *
+ * PARAMETERS:  Op              - Op containing the Field definition and args
+ *  `           walk_state      - Current method state
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: For each "Field Unit" name in the argument list that is
+ *              part of the field declaration, enter the name into the
+ *              namespace.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ds_init_field_objects (
+	union acpi_parse_object         *op,
+	struct acpi_walk_state          *walk_state)
+{
+	acpi_status                     status;
+	union acpi_parse_object         *arg = NULL;
+	struct acpi_namespace_node      *node;
+	u8                              type = 0;
+
+
+	ACPI_FUNCTION_TRACE_PTR ("ds_init_field_objects", op);
+
+
+	switch (walk_state->opcode) {
+	case AML_FIELD_OP:
+		arg = acpi_ps_get_arg (op, 2);
+		type = ACPI_TYPE_LOCAL_REGION_FIELD;
+		break;
+
+	case AML_BANK_FIELD_OP:
+		arg = acpi_ps_get_arg (op, 4);
+		type = ACPI_TYPE_LOCAL_BANK_FIELD;
+		break;
+
+	case AML_INDEX_FIELD_OP:
+		arg = acpi_ps_get_arg (op, 3);
+		type = ACPI_TYPE_LOCAL_INDEX_FIELD;
+		break;
+
+	default:
+		return_ACPI_STATUS (AE_BAD_PARAMETER);
+	}
+
+	/*
+	 * Walk the list of entries in the field_list
+	 */
+	while (arg) {
+		/* Ignore OFFSET and ACCESSAS terms here */
+
+		if (arg->common.aml_opcode == AML_INT_NAMEDFIELD_OP) {
+			status = acpi_ns_lookup (walk_state->scope_info,
+					  (char *) &arg->named.name,
+					  type, ACPI_IMODE_LOAD_PASS1,
+					  ACPI_NS_NO_UPSEARCH | ACPI_NS_DONT_OPEN_SCOPE | ACPI_NS_ERROR_IF_FOUND,
+					  walk_state, &node);
+			if (ACPI_FAILURE (status)) {
+				ACPI_REPORT_NSERROR ((char *) &arg->named.name, status);
+				if (status != AE_ALREADY_EXISTS) {
+					return_ACPI_STATUS (status);
+				}
+
+				/* Name already exists, just ignore this error */
+
+				status = AE_OK;
+			}
+
+			arg->common.node = node;
+		}
+
+		/* Move to next field in the list */
+
+		arg = arg->common.next;
+	}
+
+	return_ACPI_STATUS (AE_OK);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_create_bank_field
+ *
+ * PARAMETERS:  Op              - Op containing the Field definition and args
+ *              region_node     - Object for the containing Operation Region
+ *  `           walk_state      - Current method state
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Create a new bank field in the specified operation region
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ds_create_bank_field (
+	union acpi_parse_object         *op,
+	struct acpi_namespace_node      *region_node,
+	struct acpi_walk_state          *walk_state)
+{
+	acpi_status                     status;
+	union acpi_parse_object         *arg;
+	struct acpi_create_field_info   info;
+
+
+	ACPI_FUNCTION_TRACE_PTR ("ds_create_bank_field", op);
+
+
+	/* First arg is the name of the parent op_region (must already exist) */
+
+	arg = op->common.value.arg;
+	if (!region_node) {
+		status = acpi_ns_lookup (walk_state->scope_info, arg->common.value.name,
+				  ACPI_TYPE_REGION, ACPI_IMODE_EXECUTE,
+				  ACPI_NS_SEARCH_PARENT, walk_state, &region_node);
+		if (ACPI_FAILURE (status)) {
+			ACPI_REPORT_NSERROR (arg->common.value.name, status);
+			return_ACPI_STATUS (status);
+		}
+	}
+
+	/* Second arg is the Bank Register (Field) (must already exist) */
+
+	arg = arg->common.next;
+	status = acpi_ns_lookup (walk_state->scope_info, arg->common.value.string,
+			  ACPI_TYPE_ANY, ACPI_IMODE_EXECUTE,
+			  ACPI_NS_SEARCH_PARENT, walk_state, &info.register_node);
+	if (ACPI_FAILURE (status)) {
+		ACPI_REPORT_NSERROR (arg->common.value.string, status);
+		return_ACPI_STATUS (status);
+	}
+
+	/* Third arg is the bank_value */
+
+	arg = arg->common.next;
+	info.bank_value = (u32) arg->common.value.integer;
+
+	/* Fourth arg is the field flags */
+
+	arg = arg->common.next;
+	info.field_flags = (u8) arg->common.value.integer;
+
+	/* Each remaining arg is a Named Field */
+
+	info.field_type = ACPI_TYPE_LOCAL_BANK_FIELD;
+	info.region_node = region_node;
+
+	status = acpi_ds_get_field_names (&info, walk_state, arg->common.next);
+
+	return_ACPI_STATUS (status);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_create_index_field
+ *
+ * PARAMETERS:  Op              - Op containing the Field definition and args
+ *              region_node     - Object for the containing Operation Region
+ *  `           walk_state      - Current method state
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Create a new index field in the specified operation region
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ds_create_index_field (
+	union acpi_parse_object         *op,
+	struct acpi_namespace_node      *region_node,
+	struct acpi_walk_state          *walk_state)
+{
+	acpi_status                     status;
+	union acpi_parse_object         *arg;
+	struct acpi_create_field_info   info;
+
+
+	ACPI_FUNCTION_TRACE_PTR ("ds_create_index_field", op);
+
+
+	/* First arg is the name of the Index register (must already exist) */
+
+	arg = op->common.value.arg;
+	status = acpi_ns_lookup (walk_state->scope_info, arg->common.value.string,
+			  ACPI_TYPE_ANY, ACPI_IMODE_EXECUTE,
+			  ACPI_NS_SEARCH_PARENT, walk_state, &info.register_node);
+	if (ACPI_FAILURE (status)) {
+		ACPI_REPORT_NSERROR (arg->common.value.string, status);
+		return_ACPI_STATUS (status);
+	}
+
+	/* Second arg is the data register (must already exist) */
+
+	arg = arg->common.next;
+	status = acpi_ns_lookup (walk_state->scope_info, arg->common.value.string,
+			  ACPI_TYPE_ANY, ACPI_IMODE_EXECUTE,
+			  ACPI_NS_SEARCH_PARENT, walk_state, &info.data_register_node);
+	if (ACPI_FAILURE (status)) {
+		ACPI_REPORT_NSERROR (arg->common.value.string, status);
+		return_ACPI_STATUS (status);
+	}
+
+	/* Next arg is the field flags */
+
+	arg = arg->common.next;
+	info.field_flags = (u8) arg->common.value.integer;
+
+	/* Each remaining arg is a Named Field */
+
+	info.field_type = ACPI_TYPE_LOCAL_INDEX_FIELD;
+	info.region_node = region_node;
+
+	status = acpi_ds_get_field_names (&info, walk_state, arg->common.next);
+
+	return_ACPI_STATUS (status);
+}
+
+
diff --git a/drivers/acpi/dispatcher/dsinit.c b/drivers/acpi/dispatcher/dsinit.c
new file mode 100644
index 00000000000..b4d264dbbf6
--- /dev/null
+++ b/drivers/acpi/dispatcher/dsinit.c
@@ -0,0 +1,235 @@
+/******************************************************************************
+ *
+ * Module Name: dsinit - Object initialization namespace walk
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2005, R. Byron Moore
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+
+#include <acpi/acpi.h>
+#include <acpi/acdispat.h>
+#include <acpi/acnamesp.h>
+
+#define _COMPONENT          ACPI_DISPATCHER
+	 ACPI_MODULE_NAME    ("dsinit")
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_init_one_object
+ *
+ * PARAMETERS:  obj_handle      - Node
+ *              Level           - Current nesting level
+ *              Context         - Points to a init info struct
+ *              return_value    - Not used
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Callback from acpi_walk_namespace. Invoked for every object
+ *              within the namespace.
+ *
+ *              Currently, the only objects that require initialization are:
+ *              1) Methods
+ *              2) Operation Regions
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ds_init_one_object (
+	acpi_handle                     obj_handle,
+	u32                             level,
+	void                            *context,
+	void                            **return_value)
+{
+	acpi_object_type                type;
+	acpi_status                     status;
+	struct acpi_init_walk_info      *info = (struct acpi_init_walk_info *) context;
+
+
+	ACPI_FUNCTION_NAME ("ds_init_one_object");
+
+
+	/*
+	 * We are only interested in objects owned by the table that
+	 * was just loaded
+	 */
+	if (((struct acpi_namespace_node *) obj_handle)->owner_id !=
+			info->table_desc->table_id) {
+		return (AE_OK);
+	}
+
+	info->object_count++;
+
+	/* And even then, we are only interested in a few object types */
+
+	type = acpi_ns_get_type (obj_handle);
+
+	switch (type) {
+	case ACPI_TYPE_REGION:
+
+		status = acpi_ds_initialize_region (obj_handle);
+		if (ACPI_FAILURE (status)) {
+			ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "Region %p [%4.4s] - Init failure, %s\n",
+				obj_handle, acpi_ut_get_node_name (obj_handle),
+				acpi_format_exception (status)));
+		}
+
+		info->op_region_count++;
+		break;
+
+
+	case ACPI_TYPE_METHOD:
+
+		info->method_count++;
+
+		/* Print a dot for each method unless we are going to print the entire pathname */
+
+		if (!(acpi_dbg_level & ACPI_LV_INIT_NAMES)) {
+			ACPI_DEBUG_PRINT_RAW ((ACPI_DB_INIT, "."));
+		}
+
+		/*
+		 * Set the execution data width (32 or 64) based upon the
+		 * revision number of the parent ACPI table.
+		 * TBD: This is really for possible future support of integer width
+		 * on a per-table basis. Currently, we just use a global for the width.
+		 */
+		if (info->table_desc->pointer->revision == 1) {
+			((struct acpi_namespace_node *) obj_handle)->flags |= ANOBJ_DATA_WIDTH_32;
+		}
+
+		/*
+		 * Always parse methods to detect errors, we will delete
+		 * the parse tree below
+		 */
+		status = acpi_ds_parse_method (obj_handle);
+		if (ACPI_FAILURE (status)) {
+			ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "Method %p [%4.4s] - parse failure, %s\n",
+				obj_handle, acpi_ut_get_node_name (obj_handle),
+				acpi_format_exception (status)));
+
+			/* This parse failed, but we will continue parsing more methods */
+
+			break;
+		}
+
+		/*
+		 * Delete the parse tree.  We simply re-parse the method
+		 * for every execution since there isn't much overhead
+		 */
+		acpi_ns_delete_namespace_subtree (obj_handle);
+		acpi_ns_delete_namespace_by_owner (((struct acpi_namespace_node *) obj_handle)->object->method.owning_id);
+		break;
+
+
+	case ACPI_TYPE_DEVICE:
+
+		info->device_count++;
+		break;
+
+
+	default:
+		break;
+	}
+
+	/*
+	 * We ignore errors from above, and always return OK, since
+	 * we don't want to abort the walk on a single error.
+	 */
+	return (AE_OK);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_initialize_objects
+ *
+ * PARAMETERS:  table_desc      - Descriptor for parent ACPI table
+ *              start_node      - Root of subtree to be initialized.
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Walk the namespace starting at "start_node" and perform any
+ *              necessary initialization on the objects found therein
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ds_initialize_objects (
+	struct acpi_table_desc          *table_desc,
+	struct acpi_namespace_node      *start_node)
+{
+	acpi_status                     status;
+	struct acpi_init_walk_info      info;
+
+
+	ACPI_FUNCTION_TRACE ("ds_initialize_objects");
+
+
+	ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH,
+		"**** Starting initialization of namespace objects ****\n"));
+	ACPI_DEBUG_PRINT_RAW ((ACPI_DB_INIT, "Parsing all Control Methods:"));
+
+	info.method_count   = 0;
+	info.op_region_count = 0;
+	info.object_count   = 0;
+	info.device_count   = 0;
+	info.table_desc     = table_desc;
+
+	/* Walk entire namespace from the supplied root */
+
+	status = acpi_walk_namespace (ACPI_TYPE_ANY, start_node, ACPI_UINT32_MAX,
+			  acpi_ds_init_one_object, &info, NULL);
+	if (ACPI_FAILURE (status)) {
+		ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "walk_namespace failed, %s\n",
+			acpi_format_exception (status)));
+	}
+
+	ACPI_DEBUG_PRINT_RAW ((ACPI_DB_INIT,
+		"\nTable [%4.4s](id %4.4X) - %hd Objects with %hd Devices %hd Methods %hd Regions\n",
+		table_desc->pointer->signature, table_desc->table_id, info.object_count,
+		info.device_count, info.method_count, info.op_region_count));
+
+	ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH,
+		"%hd Methods, %hd Regions\n", info.method_count, info.op_region_count));
+
+	return_ACPI_STATUS (AE_OK);
+}
+
+
diff --git a/drivers/acpi/dispatcher/dsmethod.c b/drivers/acpi/dispatcher/dsmethod.c
new file mode 100644
index 00000000000..9f0456cb9bb
--- /dev/null
+++ b/drivers/acpi/dispatcher/dsmethod.c
@@ -0,0 +1,597 @@
+/******************************************************************************
+ *
+ * Module Name: dsmethod - Parser/Interpreter interface - control method parsing
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2005, R. Byron Moore
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+
+#include <acpi/acpi.h>
+#include <acpi/acparser.h>
+#include <acpi/amlcode.h>
+#include <acpi/acdispat.h>
+#include <acpi/acinterp.h>
+#include <acpi/acnamesp.h>
+
+
+#define _COMPONENT          ACPI_DISPATCHER
+	 ACPI_MODULE_NAME    ("dsmethod")
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_parse_method
+ *
+ * PARAMETERS:  obj_handle      - Method node
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Call the parser and parse the AML that is associated with the
+ *              method.
+ *
+ * MUTEX:       Assumes parser is locked
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ds_parse_method (
+	acpi_handle                     obj_handle)
+{
+	acpi_status                     status;
+	union acpi_operand_object       *obj_desc;
+	union acpi_parse_object         *op;
+	struct acpi_namespace_node      *node;
+	acpi_owner_id                   owner_id;
+	struct acpi_walk_state          *walk_state;
+
+
+	ACPI_FUNCTION_TRACE_PTR ("ds_parse_method", obj_handle);
+
+
+	/* Parameter Validation */
+
+	if (!obj_handle) {
+		return_ACPI_STATUS (AE_NULL_ENTRY);
+	}
+
+	ACPI_DEBUG_PRINT ((ACPI_DB_PARSE, "**** Parsing [%4.4s] **** named_obj=%p\n",
+		acpi_ut_get_node_name (obj_handle), obj_handle));
+
+	/* Extract the method object from the method Node */
+
+	node = (struct acpi_namespace_node *) obj_handle;
+	obj_desc = acpi_ns_get_attached_object (node);
+	if (!obj_desc) {
+		return_ACPI_STATUS (AE_NULL_OBJECT);
+	}
+
+	/* Create a mutex for the method if there is a concurrency limit */
+
+	if ((obj_desc->method.concurrency != ACPI_INFINITE_CONCURRENCY) &&
+		(!obj_desc->method.semaphore)) {
+		status = acpi_os_create_semaphore (obj_desc->method.concurrency,
+				   obj_desc->method.concurrency,
+				   &obj_desc->method.semaphore);
+		if (ACPI_FAILURE (status)) {
+			return_ACPI_STATUS (status);
+		}
+	}
+
+	/*
+	 * Allocate a new parser op to be the root of the parsed
+	 * method tree
+	 */
+	op = acpi_ps_alloc_op (AML_METHOD_OP);
+	if (!op) {
+		return_ACPI_STATUS (AE_NO_MEMORY);
+	}
+
+	/* Init new op with the method name and pointer back to the Node */
+
+	acpi_ps_set_name (op, node->name.integer);
+	op->common.node = node;
+
+	/*
+	 * Get a new owner_id for objects created by this method. Namespace
+	 * objects (such as Operation Regions) can be created during the
+	 * first pass parse.
+	 */
+	owner_id = acpi_ut_allocate_owner_id (ACPI_OWNER_TYPE_METHOD);
+	obj_desc->method.owning_id = owner_id;
+
+	/* Create and initialize a new walk state */
+
+	walk_state = acpi_ds_create_walk_state (owner_id, NULL, NULL, NULL);
+	if (!walk_state) {
+		return_ACPI_STATUS (AE_NO_MEMORY);
+	}
+
+	status = acpi_ds_init_aml_walk (walk_state, op, node,
+			  obj_desc->method.aml_start,
+			  obj_desc->method.aml_length, NULL, 1);
+	if (ACPI_FAILURE (status)) {
+		acpi_ds_delete_walk_state (walk_state);
+		return_ACPI_STATUS (status);
+	}
+
+	/*
+	 * Parse the method, first pass
+	 *
+	 * The first pass load is where newly declared named objects are
+	 * added into the namespace.  Actual evaluation of
+	 * the named objects (what would be called a "second
+	 * pass") happens during the actual execution of the
+	 * method so that operands to the named objects can
+	 * take on dynamic run-time values.
+	 */
+	status = acpi_ps_parse_aml (walk_state);
+	if (ACPI_FAILURE (status)) {
+		return_ACPI_STATUS (status);
+	}
+
+	ACPI_DEBUG_PRINT ((ACPI_DB_PARSE,
+		"**** [%4.4s] Parsed **** named_obj=%p Op=%p\n",
+		acpi_ut_get_node_name (obj_handle), obj_handle, op));
+
+	acpi_ps_delete_parse_tree (op);
+	return_ACPI_STATUS (status);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_begin_method_execution
+ *
+ * PARAMETERS:  method_node         - Node of the method
+ *              obj_desc            - The method object
+ *              calling_method_node - Caller of this method (if non-null)
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Prepare a method for execution.  Parses the method if necessary,
+ *              increments the thread count, and waits at the method semaphore
+ *              for clearance to execute.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ds_begin_method_execution (
+	struct acpi_namespace_node      *method_node,
+	union acpi_operand_object       *obj_desc,
+	struct acpi_namespace_node      *calling_method_node)
+{
+	acpi_status                     status = AE_OK;
+
+
+	ACPI_FUNCTION_TRACE_PTR ("ds_begin_method_execution", method_node);
+
+
+	if (!method_node) {
+		return_ACPI_STATUS (AE_NULL_ENTRY);
+	}
+
+	/*
+	 * If there is a concurrency limit on this method, we need to
+	 * obtain a unit from the method semaphore.
+	 */
+	if (obj_desc->method.semaphore) {
+		/*
+		 * Allow recursive method calls, up to the reentrancy/concurrency
+		 * limit imposed by the SERIALIZED rule and the sync_level method
+		 * parameter.
+		 *
+		 * The point of this code is to avoid permanently blocking a
+		 * thread that is making recursive method calls.
+		 */
+		if (method_node == calling_method_node) {
+			if (obj_desc->method.thread_count >= obj_desc->method.concurrency) {
+				return_ACPI_STATUS (AE_AML_METHOD_LIMIT);
+			}
+		}
+
+		/*
+		 * Get a unit from the method semaphore. This releases the
+		 * interpreter if we block
+		 */
+		status = acpi_ex_system_wait_semaphore (obj_desc->method.semaphore,
+				 ACPI_WAIT_FOREVER);
+	}
+
+	/*
+	 * Increment the method parse tree thread count since it has been
+	 * reentered one more time (even if it is the same thread)
+	 */
+	obj_desc->method.thread_count++;
+	return_ACPI_STATUS (status);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_call_control_method
+ *
+ * PARAMETERS:  Thread              - Info for this thread
+ *              this_walk_state     - Current walk state
+ *              Op                  - Current Op to be walked
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Transfer execution to a called control method
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ds_call_control_method (
+	struct acpi_thread_state        *thread,
+	struct acpi_walk_state          *this_walk_state,
+	union acpi_parse_object         *op)
+{
+	acpi_status                     status;
+	struct acpi_namespace_node      *method_node;
+	struct acpi_walk_state          *next_walk_state;
+	union acpi_operand_object       *obj_desc;
+	struct acpi_parameter_info      info;
+	u32                             i;
+
+
+	ACPI_FUNCTION_TRACE_PTR ("ds_call_control_method", this_walk_state);
+
+	ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH, "Execute method %p, currentstate=%p\n",
+		this_walk_state->prev_op, this_walk_state));
+
+	/*
+	 * Get the namespace entry for the control method we are about to call
+	 */
+	method_node = this_walk_state->method_call_node;
+	if (!method_node) {
+		return_ACPI_STATUS (AE_NULL_ENTRY);
+	}
+
+	obj_desc = acpi_ns_get_attached_object (method_node);
+	if (!obj_desc) {
+		return_ACPI_STATUS (AE_NULL_OBJECT);
+	}
+
+	obj_desc->method.owning_id = acpi_ut_allocate_owner_id (ACPI_OWNER_TYPE_METHOD);
+
+	/* Init for new method, wait on concurrency semaphore */
+
+	status = acpi_ds_begin_method_execution (method_node, obj_desc,
+			  this_walk_state->method_node);
+	if (ACPI_FAILURE (status)) {
+		return_ACPI_STATUS (status);
+	}
+
+	if (!(obj_desc->method.method_flags & AML_METHOD_INTERNAL_ONLY)) {
+		/* 1) Parse: Create a new walk state for the preempting walk */
+
+		next_walk_state = acpi_ds_create_walk_state (obj_desc->method.owning_id,
+				  op, obj_desc, NULL);
+		if (!next_walk_state) {
+			return_ACPI_STATUS (AE_NO_MEMORY);
+		}
+
+		/* Create and init a Root Node */
+
+		op = acpi_ps_create_scope_op ();
+		if (!op) {
+			status = AE_NO_MEMORY;
+			goto cleanup;
+		}
+
+		status = acpi_ds_init_aml_walk (next_walk_state, op, method_node,
+				  obj_desc->method.aml_start, obj_desc->method.aml_length,
+				  NULL, 1);
+		if (ACPI_FAILURE (status)) {
+			acpi_ds_delete_walk_state (next_walk_state);
+			goto cleanup;
+		}
+
+		/* Begin AML parse */
+
+		status = acpi_ps_parse_aml (next_walk_state);
+		acpi_ps_delete_parse_tree (op);
+	}
+
+	/* 2) Execute: Create a new state for the preempting walk */
+
+	next_walk_state = acpi_ds_create_walk_state (obj_desc->method.owning_id,
+			  NULL, obj_desc, thread);
+	if (!next_walk_state) {
+		status = AE_NO_MEMORY;
+		goto cleanup;
+	}
+	/*
+	 * The resolved arguments were put on the previous walk state's operand
+	 * stack.  Operands on the previous walk state stack always
+	 * start at index 0.
+	 * Null terminate the list of arguments
+	 */
+	this_walk_state->operands [this_walk_state->num_operands] = NULL;
+
+	info.parameters = &this_walk_state->operands[0];
+	info.parameter_type = ACPI_PARAM_ARGS;
+
+	status = acpi_ds_init_aml_walk (next_walk_state, NULL, method_node,
+			  obj_desc->method.aml_start, obj_desc->method.aml_length,
+			  &info, 3);
+	if (ACPI_FAILURE (status)) {
+		goto cleanup;
+	}
+
+	/*
+	 * Delete the operands on the previous walkstate operand stack
+	 * (they were copied to new objects)
+	 */
+	for (i = 0; i < obj_desc->method.param_count; i++) {
+		acpi_ut_remove_reference (this_walk_state->operands [i]);
+		this_walk_state->operands [i] = NULL;
+	}
+
+	/* Clear the operand stack */
+
+	this_walk_state->num_operands = 0;
+
+	ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH,
+		"Starting nested execution, newstate=%p\n", next_walk_state));
+
+	if (obj_desc->method.method_flags & AML_METHOD_INTERNAL_ONLY) {
+		status = obj_desc->method.implementation (next_walk_state);
+		return_ACPI_STATUS (status);
+	}
+
+	return_ACPI_STATUS (AE_OK);
+
+
+	/* On error, we must delete the new walk state */
+
+cleanup:
+	if (next_walk_state && (next_walk_state->method_desc)) {
+		/* Decrement the thread count on the method parse tree */
+
+	   next_walk_state->method_desc->method.thread_count--;
+	}
+	(void) acpi_ds_terminate_control_method (next_walk_state);
+	acpi_ds_delete_walk_state (next_walk_state);
+	return_ACPI_STATUS (status);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_restart_control_method
+ *
+ * PARAMETERS:  walk_state          - State for preempted method (caller)
+ *              return_desc         - Return value from the called method
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Restart a method that was preempted by another (nested) method
+ *              invocation.  Handle the return value (if any) from the callee.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ds_restart_control_method (
+	struct acpi_walk_state          *walk_state,
+	union acpi_operand_object       *return_desc)
+{
+	acpi_status                     status;
+
+
+	ACPI_FUNCTION_TRACE_PTR ("ds_restart_control_method", walk_state);
+
+
+	ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH,
+		"****Restart [%4.4s] Op %p return_value_from_callee %p\n",
+		(char *) &walk_state->method_node->name, walk_state->method_call_op,
+		return_desc));
+
+	ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH,
+		"    return_from_this_method_used?=%X res_stack %p Walk %p\n",
+		walk_state->return_used,
+		walk_state->results, walk_state));
+
+	/* Did the called method return a value? */
+
+	if (return_desc) {
+		/* Are we actually going to use the return value? */
+
+		if (walk_state->return_used) {
+			/* Save the return value from the previous method */
+
+			status = acpi_ds_result_push (return_desc, walk_state);
+			if (ACPI_FAILURE (status)) {
+				acpi_ut_remove_reference (return_desc);
+				return_ACPI_STATUS (status);
+			}
+
+			/*
+			 * Save as THIS method's return value in case it is returned
+			 * immediately to yet another method
+			 */
+			walk_state->return_desc = return_desc;
+		}
+
+		/*
+		 * The following code is the
+		 * optional support for a so-called "implicit return". Some AML code
+		 * assumes that the last value of the method is "implicitly" returned
+		 * to the caller. Just save the last result as the return value.
+		 * NOTE: this is optional because the ASL language does not actually
+		 * support this behavior.
+		 */
+		else if (!acpi_ds_do_implicit_return (return_desc, walk_state, FALSE)) {
+			/*
+			 * Delete the return value if it will not be used by the
+			 * calling method
+			 */
+			acpi_ut_remove_reference (return_desc);
+		}
+	}
+
+	return_ACPI_STATUS (AE_OK);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_terminate_control_method
+ *
+ * PARAMETERS:  walk_state          - State of the method
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Terminate a control method.  Delete everything that the method
+ *              created, delete all locals and arguments, and delete the parse
+ *              tree if requested.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ds_terminate_control_method (
+	struct acpi_walk_state          *walk_state)
+{
+	union acpi_operand_object       *obj_desc;
+	struct acpi_namespace_node      *method_node;
+	acpi_status                     status;
+
+
+	ACPI_FUNCTION_TRACE_PTR ("ds_terminate_control_method", walk_state);
+
+
+	if (!walk_state) {
+		return (AE_BAD_PARAMETER);
+	}
+
+	/* The current method object was saved in the walk state */
+
+	obj_desc = walk_state->method_desc;
+	if (!obj_desc) {
+		return_ACPI_STATUS (AE_OK);
+	}
+
+	/* Delete all arguments and locals */
+
+	acpi_ds_method_data_delete_all (walk_state);
+
+	/*
+	 * Lock the parser while we terminate this method.
+	 * If this is the last thread executing the method,
+	 * we have additional cleanup to perform
+	 */
+	status = acpi_ut_acquire_mutex (ACPI_MTX_PARSER);
+	if (ACPI_FAILURE (status)) {
+		return_ACPI_STATUS (status);
+	}
+
+	/* Signal completion of the execution of this method if necessary */
+
+	if (walk_state->method_desc->method.semaphore) {
+		status = acpi_os_signal_semaphore (
+				  walk_state->method_desc->method.semaphore, 1);
+		if (ACPI_FAILURE (status)) {
+			ACPI_REPORT_ERROR (("Could not signal method semaphore\n"));
+			status = AE_OK;
+
+			/* Ignore error and continue cleanup */
+		}
+	}
+
+	if (walk_state->method_desc->method.thread_count) {
+		ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH,
+			"*** Not deleting method namespace, there are still %d threads\n",
+			walk_state->method_desc->method.thread_count));
+	}
+
+	if (!walk_state->method_desc->method.thread_count) {
+		/*
+		 * Support to dynamically change a method from not_serialized to
+		 * Serialized if it appears that the method is written foolishly and
+		 * does not support multiple thread execution.  The best example of this
+		 * is if such a method creates namespace objects and blocks.  A second
+		 * thread will fail with an AE_ALREADY_EXISTS exception
+		 *
+		 * This code is here because we must wait until the last thread exits
+		 * before creating the synchronization semaphore.
+		 */
+		if ((walk_state->method_desc->method.concurrency == 1) &&
+			(!walk_state->method_desc->method.semaphore)) {
+			status = acpi_os_create_semaphore (1,
+					 1,
+					 &walk_state->method_desc->method.semaphore);
+		}
+
+		/*
+		 * There are no more threads executing this method.  Perform
+		 * additional cleanup.
+		 *
+		 * The method Node is stored in the walk state
+		 */
+		method_node = walk_state->method_node;
+
+		/*
+		 * Delete any namespace entries created immediately underneath
+		 * the method
+		 */
+		status = acpi_ut_acquire_mutex (ACPI_MTX_NAMESPACE);
+		if (ACPI_FAILURE (status)) {
+			return_ACPI_STATUS (status);
+		}
+
+		if (method_node->child) {
+			acpi_ns_delete_namespace_subtree (method_node);
+		}
+
+		/*
+		 * Delete any namespace entries created anywhere else within
+		 * the namespace
+		 */
+		acpi_ns_delete_namespace_by_owner (walk_state->method_desc->method.owning_id);
+		status = acpi_ut_release_mutex (ACPI_MTX_NAMESPACE);
+		if (ACPI_FAILURE (status)) {
+			return_ACPI_STATUS (status);
+		}
+	}
+
+	status = acpi_ut_release_mutex (ACPI_MTX_PARSER);
+	return_ACPI_STATUS (status);
+}
+
+
diff --git a/drivers/acpi/dispatcher/dsmthdat.c b/drivers/acpi/dispatcher/dsmthdat.c
new file mode 100644
index 00000000000..f31d095f983
--- /dev/null
+++ b/drivers/acpi/dispatcher/dsmthdat.c
@@ -0,0 +1,715 @@
+/*******************************************************************************
+ *
+ * Module Name: dsmthdat - control method arguments and local variables
+ *
+ ******************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2005, R. Byron Moore
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+
+#include <acpi/acpi.h>
+#include <acpi/acdispat.h>
+#include <acpi/amlcode.h>
+#include <acpi/acnamesp.h>
+#include <acpi/acinterp.h>
+
+
+#define _COMPONENT          ACPI_DISPATCHER
+	 ACPI_MODULE_NAME    ("dsmthdat")
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_method_data_init
+ *
+ * PARAMETERS:  walk_state          - Current walk state object
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Initialize the data structures that hold the method's arguments
+ *              and locals.  The data struct is an array of NTEs for each.
+ *              This allows ref_of and de_ref_of to work properly for these
+ *              special data types.
+ *
+ * NOTES:       walk_state fields are initialized to zero by the
+ *              ACPI_MEM_CALLOCATE().
+ *
+ *              A pseudo-Namespace Node is assigned to each argument and local
+ *              so that ref_of() can return a pointer to the Node.
+ *
+ ******************************************************************************/
+
+void
+acpi_ds_method_data_init (
+	struct acpi_walk_state          *walk_state)
+{
+	u32                             i;
+
+
+	ACPI_FUNCTION_TRACE ("ds_method_data_init");
+
+
+	/* Init the method arguments */
+
+	for (i = 0; i < ACPI_METHOD_NUM_ARGS; i++) {
+		ACPI_MOVE_32_TO_32 (&walk_state->arguments[i].name,
+				   NAMEOF_ARG_NTE);
+		walk_state->arguments[i].name.integer |= (i << 24);
+		walk_state->arguments[i].descriptor   = ACPI_DESC_TYPE_NAMED;
+		walk_state->arguments[i].type         = ACPI_TYPE_ANY;
+		walk_state->arguments[i].flags        = ANOBJ_END_OF_PEER_LIST | ANOBJ_METHOD_ARG;
+	}
+
+	/* Init the method locals */
+
+	for (i = 0; i < ACPI_METHOD_NUM_LOCALS; i++) {
+		ACPI_MOVE_32_TO_32 (&walk_state->local_variables[i].name,
+				   NAMEOF_LOCAL_NTE);
+
+		walk_state->local_variables[i].name.integer |= (i << 24);
+		walk_state->local_variables[i].descriptor  = ACPI_DESC_TYPE_NAMED;
+		walk_state->local_variables[i].type        = ACPI_TYPE_ANY;
+		walk_state->local_variables[i].flags       = ANOBJ_END_OF_PEER_LIST | ANOBJ_METHOD_LOCAL;
+	}
+
+	return_VOID;
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_method_data_delete_all
+ *
+ * PARAMETERS:  walk_state          - Current walk state object
+ *
+ * RETURN:      None
+ *
+ * DESCRIPTION: Delete method locals and arguments.  Arguments are only
+ *              deleted if this method was called from another method.
+ *
+ ******************************************************************************/
+
+void
+acpi_ds_method_data_delete_all (
+	struct acpi_walk_state          *walk_state)
+{
+	u32                             index;
+
+
+	ACPI_FUNCTION_TRACE ("ds_method_data_delete_all");
+
+
+	/* Detach the locals */
+
+	for (index = 0; index < ACPI_METHOD_NUM_LOCALS; index++) {
+		if (walk_state->local_variables[index].object) {
+			ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "Deleting Local%d=%p\n",
+					index, walk_state->local_variables[index].object));
+
+			/* Detach object (if present) and remove a reference */
+
+			acpi_ns_detach_object (&walk_state->local_variables[index]);
+		}
+	}
+
+	/* Detach the arguments */
+
+	for (index = 0; index < ACPI_METHOD_NUM_ARGS; index++) {
+		if (walk_state->arguments[index].object) {
+			ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "Deleting Arg%d=%p\n",
+					index, walk_state->arguments[index].object));
+
+			/* Detach object (if present) and remove a reference */
+
+			acpi_ns_detach_object (&walk_state->arguments[index]);
+		}
+	}
+
+	return_VOID;
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_method_data_init_args
+ *
+ * PARAMETERS:  *Params         - Pointer to a parameter list for the method
+ *              max_param_count - The arg count for this method
+ *              walk_state      - Current walk state object
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Initialize arguments for a method.  The parameter list is a list
+ *              of ACPI operand objects, either null terminated or whose length
+ *              is defined by max_param_count.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ds_method_data_init_args (
+	union acpi_operand_object       **params,
+	u32                             max_param_count,
+	struct acpi_walk_state          *walk_state)
+{
+	acpi_status                     status;
+	u32                             index = 0;
+
+
+	ACPI_FUNCTION_TRACE_PTR ("ds_method_data_init_args", params);
+
+
+	if (!params) {
+		ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "No param list passed to method\n"));
+		return_ACPI_STATUS (AE_OK);
+	}
+
+	/* Copy passed parameters into the new method stack frame  */
+
+	while ((index < ACPI_METHOD_NUM_ARGS) && (index < max_param_count) && params[index]) {
+		/*
+		 * A valid parameter.
+		 * Store the argument in the method/walk descriptor.
+		 * Do not copy the arg in order to implement call by reference
+		 */
+		status = acpi_ds_method_data_set_value (AML_ARG_OP, index, params[index], walk_state);
+		if (ACPI_FAILURE (status)) {
+			return_ACPI_STATUS (status);
+		}
+
+		index++;
+	}
+
+	ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "%d args passed to method\n", index));
+	return_ACPI_STATUS (AE_OK);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_method_data_get_node
+ *
+ * PARAMETERS:  Opcode              - Either AML_LOCAL_OP or AML_ARG_OP
+ *              Index               - which local_var or argument whose type
+ *                                      to get
+ *              walk_state          - Current walk state object
+ *
+ * RETURN:      Get the Node associated with a local or arg.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ds_method_data_get_node (
+	u16                             opcode,
+	u32                             index,
+	struct acpi_walk_state          *walk_state,
+	struct acpi_namespace_node      **node)
+{
+	ACPI_FUNCTION_TRACE ("ds_method_data_get_node");
+
+
+	/*
+	 * Method Locals and Arguments are supported
+	 */
+	switch (opcode) {
+	case AML_LOCAL_OP:
+
+		if (index > ACPI_METHOD_MAX_LOCAL) {
+			ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "Local index %d is invalid (max %d)\n",
+				index, ACPI_METHOD_MAX_LOCAL));
+			return_ACPI_STATUS (AE_AML_INVALID_INDEX);
+		}
+
+		/* Return a pointer to the pseudo-node */
+
+		*node = &walk_state->local_variables[index];
+		break;
+
+	case AML_ARG_OP:
+
+		if (index > ACPI_METHOD_MAX_ARG) {
+			ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "Arg index %d is invalid (max %d)\n",
+				index, ACPI_METHOD_MAX_ARG));
+			return_ACPI_STATUS (AE_AML_INVALID_INDEX);
+		}
+
+		/* Return a pointer to the pseudo-node */
+
+		*node = &walk_state->arguments[index];
+		break;
+
+	default:
+		ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "Opcode %d is invalid\n", opcode));
+		return_ACPI_STATUS (AE_AML_BAD_OPCODE);
+	}
+
+	return_ACPI_STATUS (AE_OK);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_method_data_set_value
+ *
+ * PARAMETERS:  Opcode              - Either AML_LOCAL_OP or AML_ARG_OP
+ *              Index               - which local_var or argument to get
+ *              Object              - Object to be inserted into the stack entry
+ *              walk_state          - Current walk state object
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Insert an object onto the method stack at entry Opcode:Index.
+ *              Note: There is no "implicit conversion" for locals.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ds_method_data_set_value (
+	u16                             opcode,
+	u32                             index,
+	union acpi_operand_object       *object,
+	struct acpi_walk_state          *walk_state)
+{
+	acpi_status                     status;
+	struct acpi_namespace_node      *node;
+
+
+	ACPI_FUNCTION_TRACE ("ds_method_data_set_value");
+
+
+	ACPI_DEBUG_PRINT ((ACPI_DB_EXEC,
+		"new_obj %p Opcode %X, Refs=%d [%s]\n", object,
+		opcode, object->common.reference_count,
+		acpi_ut_get_type_name (object->common.type)));
+
+	/* Get the namespace node for the arg/local */
+
+	status = acpi_ds_method_data_get_node (opcode, index, walk_state, &node);
+	if (ACPI_FAILURE (status)) {
+		return_ACPI_STATUS (status);
+	}
+
+	/*
+	 * Increment ref count so object can't be deleted while installed.
+	 * NOTE: We do not copy the object in order to preserve the call by
+	 * reference semantics of ACPI Control Method invocation.
+	 * (See ACPI specification 2.0_c)
+	 */
+	acpi_ut_add_reference (object);
+
+	/* Install the object */
+
+	node->object = object;
+	return_ACPI_STATUS (status);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_method_data_get_type
+ *
+ * PARAMETERS:  Opcode              - Either AML_LOCAL_OP or AML_ARG_OP
+ *              Index               - which local_var or argument whose type
+ *                                      to get
+ *              walk_state          - Current walk state object
+ *
+ * RETURN:      Data type of current value of the selected Arg or Local
+ *
+ ******************************************************************************/
+#ifdef ACPI_FUTURE_USAGE
+acpi_object_type
+acpi_ds_method_data_get_type (
+	u16                             opcode,
+	u32                             index,
+	struct acpi_walk_state          *walk_state)
+{
+	acpi_status                     status;
+	struct acpi_namespace_node      *node;
+	union acpi_operand_object       *object;
+
+
+	ACPI_FUNCTION_TRACE ("ds_method_data_get_type");
+
+
+	/* Get the namespace node for the arg/local */
+
+	status = acpi_ds_method_data_get_node (opcode, index, walk_state, &node);
+	if (ACPI_FAILURE (status)) {
+		return_VALUE ((ACPI_TYPE_NOT_FOUND));
+	}
+
+	/* Get the object */
+
+	object = acpi_ns_get_attached_object (node);
+	if (!object) {
+		/* Uninitialized local/arg, return TYPE_ANY */
+
+		return_VALUE (ACPI_TYPE_ANY);
+	}
+
+	/* Get the object type */
+
+	return_VALUE (ACPI_GET_OBJECT_TYPE (object));
+}
+#endif  /*  ACPI_FUTURE_USAGE  */
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_method_data_get_value
+ *
+ * PARAMETERS:  Opcode              - Either AML_LOCAL_OP or AML_ARG_OP
+ *              Index               - which local_var or argument to get
+ *              walk_state          - Current walk state object
+ *              *dest_desc          - Ptr to Descriptor into which selected Arg
+ *                                    or Local value should be copied
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Retrieve value of selected Arg or Local from the method frame
+ *              at the current top of the method stack.
+ *              Used only in acpi_ex_resolve_to_value().
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ds_method_data_get_value (
+	u16                             opcode,
+	u32                             index,
+	struct acpi_walk_state          *walk_state,
+	union acpi_operand_object       **dest_desc)
+{
+	acpi_status                     status;
+	struct acpi_namespace_node      *node;
+	union acpi_operand_object       *object;
+
+
+	ACPI_FUNCTION_TRACE ("ds_method_data_get_value");
+
+
+	/* Validate the object descriptor */
+
+	if (!dest_desc) {
+		ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "Null object descriptor pointer\n"));
+		return_ACPI_STATUS (AE_BAD_PARAMETER);
+	}
+
+	/* Get the namespace node for the arg/local */
+
+	status = acpi_ds_method_data_get_node (opcode, index, walk_state, &node);
+	if (ACPI_FAILURE (status)) {
+		return_ACPI_STATUS (status);
+	}
+
+	/* Get the object from the node */
+
+	object = node->object;
+
+	/* Examine the returned object, it must be valid. */
+
+	if (!object) {
+		/*
+		 * Index points to uninitialized object.
+		 * This means that either 1) The expected argument was
+		 * not passed to the method, or 2) A local variable
+		 * was referenced by the method (via the ASL)
+		 * before it was initialized.  Either case is an error.
+		 */
+
+		/* If slack enabled, init the local_x/arg_x to an Integer of value zero */
+
+		if (acpi_gbl_enable_interpreter_slack) {
+			object = acpi_ut_create_internal_object (ACPI_TYPE_INTEGER);
+			if (!object) {
+				return_ACPI_STATUS (AE_NO_MEMORY);
+			}
+
+			object->integer.value = 0;
+			node->object = object;
+		}
+
+		/* Otherwise, return the error */
+
+		else switch (opcode) {
+		case AML_ARG_OP:
+
+			ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "Uninitialized Arg[%d] at node %p\n",
+				index, node));
+
+			return_ACPI_STATUS (AE_AML_UNINITIALIZED_ARG);
+
+		case AML_LOCAL_OP:
+
+			ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "Uninitialized Local[%d] at node %p\n",
+				index, node));
+
+			return_ACPI_STATUS (AE_AML_UNINITIALIZED_LOCAL);
+
+		default:
+			ACPI_REPORT_ERROR (("Not Arg/Local opcode: %X\n", opcode));
+			return_ACPI_STATUS (AE_AML_INTERNAL);
+		}
+	}
+
+	/*
+	 * The Index points to an initialized and valid object.
+	 * Return an additional reference to the object
+	 */
+	*dest_desc = object;
+	acpi_ut_add_reference (object);
+
+	return_ACPI_STATUS (AE_OK);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_method_data_delete_value
+ *
+ * PARAMETERS:  Opcode              - Either AML_LOCAL_OP or AML_ARG_OP
+ *              Index               - which local_var or argument to delete
+ *              walk_state          - Current walk state object
+ *
+ * RETURN:      None
+ *
+ * DESCRIPTION: Delete the entry at Opcode:Index on the method stack.  Inserts
+ *              a null into the stack slot after the object is deleted.
+ *
+ ******************************************************************************/
+
+void
+acpi_ds_method_data_delete_value (
+	u16                             opcode,
+	u32                             index,
+	struct acpi_walk_state          *walk_state)
+{
+	acpi_status                     status;
+	struct acpi_namespace_node      *node;
+	union acpi_operand_object       *object;
+
+
+	ACPI_FUNCTION_TRACE ("ds_method_data_delete_value");
+
+
+	/* Get the namespace node for the arg/local */
+
+	status = acpi_ds_method_data_get_node (opcode, index, walk_state, &node);
+	if (ACPI_FAILURE (status)) {
+		return_VOID;
+	}
+
+	/* Get the associated object */
+
+	object = acpi_ns_get_attached_object (node);
+
+	/*
+	 * Undefine the Arg or Local by setting its descriptor
+	 * pointer to NULL. Locals/Args can contain both
+	 * ACPI_OPERAND_OBJECTS and ACPI_NAMESPACE_NODEs
+	 */
+	node->object = NULL;
+
+	if ((object) &&
+		(ACPI_GET_DESCRIPTOR_TYPE (object) == ACPI_DESC_TYPE_OPERAND)) {
+		/*
+		 * There is a valid object.
+		 * Decrement the reference count by one to balance the
+		 * increment when the object was stored.
+		 */
+		acpi_ut_remove_reference (object);
+	}
+
+	return_VOID;
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_store_object_to_local
+ *
+ * PARAMETERS:  Opcode              - Either AML_LOCAL_OP or AML_ARG_OP
+ *              Index               - which local_var or argument to set
+ *              obj_desc            - Value to be stored
+ *              walk_state          - Current walk state
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Store a value in an Arg or Local.  The obj_desc is installed
+ *              as the new value for the Arg or Local and the reference count
+ *              for obj_desc is incremented.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ds_store_object_to_local (
+	u16                             opcode,
+	u32                             index,
+	union acpi_operand_object       *obj_desc,
+	struct acpi_walk_state          *walk_state)
+{
+	acpi_status                     status;
+	struct acpi_namespace_node      *node;
+	union acpi_operand_object       *current_obj_desc;
+	union acpi_operand_object       *new_obj_desc;
+
+
+	ACPI_FUNCTION_TRACE ("ds_store_object_to_local");
+	ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "Opcode=%X Index=%d Obj=%p\n",
+		opcode, index, obj_desc));
+
+	/* Parameter validation */
+
+	if (!obj_desc) {
+		return_ACPI_STATUS (AE_BAD_PARAMETER);
+	}
+
+	/* Get the namespace node for the arg/local */
+
+	status = acpi_ds_method_data_get_node (opcode, index, walk_state, &node);
+	if (ACPI_FAILURE (status)) {
+		return_ACPI_STATUS (status);
+	}
+
+	current_obj_desc = acpi_ns_get_attached_object (node);
+	if (current_obj_desc == obj_desc) {
+		ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "Obj=%p already installed!\n",
+			obj_desc));
+		return_ACPI_STATUS (status);
+	}
+
+	/*
+	 * If the reference count on the object is more than one, we must
+	 * take a copy of the object before we store.  A reference count
+	 * of exactly 1 means that the object was just created during the
+	 * evaluation of an expression, and we can safely use it since it
+	 * is not used anywhere else.
+	 */
+	new_obj_desc = obj_desc;
+	if (obj_desc->common.reference_count > 1) {
+		status = acpi_ut_copy_iobject_to_iobject (obj_desc, &new_obj_desc, walk_state);
+		if (ACPI_FAILURE (status)) {
+			return_ACPI_STATUS (status);
+		}
+	}
+
+	/*
+	 * If there is an object already in this slot, we either
+	 * have to delete it, or if this is an argument and there
+	 * is an object reference stored there, we have to do
+	 * an indirect store!
+	 */
+	if (current_obj_desc) {
+		/*
+		 * Check for an indirect store if an argument
+		 * contains an object reference (stored as an Node).
+		 * We don't allow this automatic dereferencing for
+		 * locals, since a store to a local should overwrite
+		 * anything there, including an object reference.
+		 *
+		 * If both Arg0 and Local0 contain ref_of (Local4):
+		 *
+		 * Store (1, Arg0)             - Causes indirect store to local4
+		 * Store (1, Local0)           - Stores 1 in local0, overwriting
+		 *                                  the reference to local4
+		 * Store (1, de_refof (Local0)) - Causes indirect store to local4
+		 *
+		 * Weird, but true.
+		 */
+		if (opcode == AML_ARG_OP) {
+			/*
+			 * Make sure that the object is the correct type.  This may be overkill, but
+			 * it is here because references were NS nodes in the past.  Now they are
+			 * operand objects of type Reference.
+			 */
+			if (ACPI_GET_DESCRIPTOR_TYPE (current_obj_desc) != ACPI_DESC_TYPE_OPERAND) {
+				ACPI_REPORT_ERROR (("Invalid descriptor type while storing to method arg: [%s]\n",
+						acpi_ut_get_descriptor_name (current_obj_desc)));
+				return_ACPI_STATUS (AE_AML_INTERNAL);
+			}
+
+			/*
+			 * If we have a valid reference object that came from ref_of(), do the
+			 * indirect store
+			 */
+			if ((current_obj_desc->common.type == ACPI_TYPE_LOCAL_REFERENCE) &&
+				(current_obj_desc->reference.opcode == AML_REF_OF_OP)) {
+				ACPI_DEBUG_PRINT ((ACPI_DB_EXEC,
+						"Arg (%p) is an obj_ref(Node), storing in node %p\n",
+						new_obj_desc, current_obj_desc));
+
+				/*
+				 * Store this object to the Node (perform the indirect store)
+				 * NOTE: No implicit conversion is performed, as per the ACPI
+				 * specification rules on storing to Locals/Args.
+				 */
+				status = acpi_ex_store_object_to_node (new_obj_desc,
+						 current_obj_desc->reference.object, walk_state,
+						 ACPI_NO_IMPLICIT_CONVERSION);
+
+				/* Remove local reference if we copied the object above */
+
+				if (new_obj_desc != obj_desc) {
+					acpi_ut_remove_reference (new_obj_desc);
+				}
+				return_ACPI_STATUS (status);
+			}
+		}
+
+		/*
+		 * Delete the existing object
+		 * before storing the new one
+		 */
+		acpi_ds_method_data_delete_value (opcode, index, walk_state);
+	}
+
+	/*
+	 * Install the Obj descriptor (*new_obj_desc) into
+	 * the descriptor for the Arg or Local.
+	 * (increments the object reference count by one)
+	 */
+	status = acpi_ds_method_data_set_value (opcode, index, new_obj_desc, walk_state);
+
+	/* Remove local reference if we copied the object above */
+
+	if (new_obj_desc != obj_desc) {
+		acpi_ut_remove_reference (new_obj_desc);
+	}
+
+	return_ACPI_STATUS (status);
+}
+
+
diff --git a/drivers/acpi/dispatcher/dsobject.c b/drivers/acpi/dispatcher/dsobject.c
new file mode 100644
index 00000000000..eb8af4785bc
--- /dev/null
+++ b/drivers/acpi/dispatcher/dsobject.c
@@ -0,0 +1,618 @@
+/******************************************************************************
+ *
+ * Module Name: dsobject - Dispatcher object management routines
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2005, R. Byron Moore
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+
+#include <acpi/acpi.h>
+#include <acpi/acparser.h>
+#include <acpi/amlcode.h>
+#include <acpi/acdispat.h>
+#include <acpi/acnamesp.h>
+#include <acpi/acinterp.h>
+
+#define _COMPONENT          ACPI_DISPATCHER
+	 ACPI_MODULE_NAME    ("dsobject")
+
+
+#ifndef ACPI_NO_METHOD_EXECUTION
+/*****************************************************************************
+ *
+ * FUNCTION:    acpi_ds_build_internal_object
+ *
+ * PARAMETERS:  walk_state      - Current walk state
+ *              Op              - Parser object to be translated
+ *              obj_desc_ptr    - Where the ACPI internal object is returned
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Translate a parser Op object to the equivalent namespace object
+ *              Simple objects are any objects other than a package object!
+ *
+ ****************************************************************************/
+
+acpi_status
+acpi_ds_build_internal_object (
+	struct acpi_walk_state          *walk_state,
+	union acpi_parse_object         *op,
+	union acpi_operand_object       **obj_desc_ptr)
+{
+	union acpi_operand_object       *obj_desc;
+	acpi_status                     status;
+
+
+	ACPI_FUNCTION_TRACE ("ds_build_internal_object");
+
+
+	*obj_desc_ptr = NULL;
+	if (op->common.aml_opcode == AML_INT_NAMEPATH_OP) {
+		/*
+		 * This is an named object reference.  If this name was
+		 * previously looked up in the namespace, it was stored in this op.
+		 * Otherwise, go ahead and look it up now
+		 */
+		if (!op->common.node) {
+			status = acpi_ns_lookup (walk_state->scope_info, op->common.value.string,
+					  ACPI_TYPE_ANY, ACPI_IMODE_EXECUTE,
+					  ACPI_NS_SEARCH_PARENT | ACPI_NS_DONT_OPEN_SCOPE, NULL,
+					  (struct acpi_namespace_node **) &(op->common.node));
+
+			if (ACPI_FAILURE (status)) {
+				ACPI_REPORT_NSERROR (op->common.value.string, status);
+				return_ACPI_STATUS (status);
+			}
+		}
+	}
+
+	/* Create and init the internal ACPI object */
+
+	obj_desc = acpi_ut_create_internal_object ((acpi_ps_get_opcode_info (op->common.aml_opcode))->object_type);
+	if (!obj_desc) {
+		return_ACPI_STATUS (AE_NO_MEMORY);
+	}
+
+	status = acpi_ds_init_object_from_op (walk_state, op, op->common.aml_opcode, &obj_desc);
+	if (ACPI_FAILURE (status)) {
+		acpi_ut_remove_reference (obj_desc);
+		return_ACPI_STATUS (status);
+	}
+
+	*obj_desc_ptr = obj_desc;
+	return_ACPI_STATUS (AE_OK);
+}
+
+
+/*****************************************************************************
+ *
+ * FUNCTION:    acpi_ds_build_internal_buffer_obj
+ *
+ * PARAMETERS:  walk_state      - Current walk state
+ *              Op              - Parser object to be translated
+ *              buffer_length   - Length of the buffer
+ *              obj_desc_ptr    - Where the ACPI internal object is returned
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Translate a parser Op package object to the equivalent
+ *              namespace object
+ *
+ ****************************************************************************/
+
+acpi_status
+acpi_ds_build_internal_buffer_obj (
+	struct acpi_walk_state          *walk_state,
+	union acpi_parse_object         *op,
+	u32                             buffer_length,
+	union acpi_operand_object       **obj_desc_ptr)
+{
+	union acpi_parse_object         *arg;
+	union acpi_operand_object       *obj_desc;
+	union acpi_parse_object         *byte_list;
+	u32                             byte_list_length = 0;
+
+
+	ACPI_FUNCTION_TRACE ("ds_build_internal_buffer_obj");
+
+
+	obj_desc = *obj_desc_ptr;
+	if (obj_desc) {
+		/*
+		 * We are evaluating a Named buffer object "Name (xxxx, Buffer)".
+		 * The buffer object already exists (from the NS node)
+		 */
+	}
+	else {
+		/* Create a new buffer object */
+
+		obj_desc = acpi_ut_create_internal_object (ACPI_TYPE_BUFFER);
+		*obj_desc_ptr = obj_desc;
+		if (!obj_desc) {
+			return_ACPI_STATUS (AE_NO_MEMORY);
+		}
+	}
+
+	/*
+	 * Second arg is the buffer data (optional) byte_list can be either
+	 * individual bytes or a string initializer.  In either case, a
+	 * byte_list appears in the AML.
+	 */
+	arg = op->common.value.arg;         /* skip first arg */
+
+	byte_list = arg->named.next;
+	if (byte_list) {
+		if (byte_list->common.aml_opcode != AML_INT_BYTELIST_OP) {
+			ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
+				"Expecting bytelist, got AML opcode %X in op %p\n",
+				byte_list->common.aml_opcode, byte_list));
+
+			acpi_ut_remove_reference (obj_desc);
+			return (AE_TYPE);
+		}
+
+		byte_list_length = (u32) byte_list->common.value.integer;
+	}
+
+	/*
+	 * The buffer length (number of bytes) will be the larger of:
+	 * 1) The specified buffer length and
+	 * 2) The length of the initializer byte list
+	 */
+	obj_desc->buffer.length = buffer_length;
+	if (byte_list_length > buffer_length) {
+		obj_desc->buffer.length = byte_list_length;
+	}
+
+	/* Allocate the buffer */
+
+	if (obj_desc->buffer.length == 0) {
+		obj_desc->buffer.pointer = NULL;
+		ACPI_DEBUG_PRINT ((ACPI_DB_EXEC,
+			"Buffer defined with zero length in AML, creating\n"));
+	}
+	else {
+		obj_desc->buffer.pointer = ACPI_MEM_CALLOCATE (
+				   obj_desc->buffer.length);
+		if (!obj_desc->buffer.pointer) {
+			acpi_ut_delete_object_desc (obj_desc);
+			return_ACPI_STATUS (AE_NO_MEMORY);
+		}
+
+		/* Initialize buffer from the byte_list (if present) */
+
+		if (byte_list) {
+			ACPI_MEMCPY (obj_desc->buffer.pointer, byte_list->named.data,
+					  byte_list_length);
+		}
+	}
+
+	obj_desc->buffer.flags |= AOPOBJ_DATA_VALID;
+	op->common.node = (struct acpi_namespace_node *) obj_desc;
+	return_ACPI_STATUS (AE_OK);
+}
+
+
+/*****************************************************************************
+ *
+ * FUNCTION:    acpi_ds_build_internal_package_obj
+ *
+ * PARAMETERS:  walk_state      - Current walk state
+ *              Op              - Parser object to be translated
+ *              package_length  - Number of elements in the package
+ *              obj_desc_ptr    - Where the ACPI internal object is returned
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Translate a parser Op package object to the equivalent
+ *              namespace object
+ *
+ ****************************************************************************/
+
+acpi_status
+acpi_ds_build_internal_package_obj (
+	struct acpi_walk_state          *walk_state,
+	union acpi_parse_object         *op,
+	u32                             package_length,
+	union acpi_operand_object       **obj_desc_ptr)
+{
+	union acpi_parse_object         *arg;
+	union acpi_parse_object         *parent;
+	union acpi_operand_object       *obj_desc = NULL;
+	u32                             package_list_length;
+	acpi_status                     status = AE_OK;
+	u32                             i;
+
+
+	ACPI_FUNCTION_TRACE ("ds_build_internal_package_obj");
+
+
+	/* Find the parent of a possibly nested package */
+
+	parent = op->common.parent;
+	while ((parent->common.aml_opcode == AML_PACKAGE_OP)    ||
+		   (parent->common.aml_opcode == AML_VAR_PACKAGE_OP)) {
+		parent = parent->common.parent;
+	}
+
+	obj_desc = *obj_desc_ptr;
+	if (obj_desc) {
+		/*
+		 * We are evaluating a Named package object "Name (xxxx, Package)".
+		 * Get the existing package object from the NS node
+		 */
+	}
+	else {
+		obj_desc = acpi_ut_create_internal_object (ACPI_TYPE_PACKAGE);
+		*obj_desc_ptr = obj_desc;
+		if (!obj_desc) {
+			return_ACPI_STATUS (AE_NO_MEMORY);
+		}
+
+		obj_desc->package.node = parent->common.node;
+	}
+
+	obj_desc->package.count = package_length;
+
+	/* Count the number of items in the package list */
+
+	package_list_length = 0;
+	arg = op->common.value.arg;
+	arg = arg->common.next;
+	while (arg) {
+		package_list_length++;
+		arg = arg->common.next;
+	}
+
+	/*
+	 * The package length (number of elements) will be the greater
+	 * of the specified length and the length of the initializer list
+	 */
+	if (package_list_length > package_length) {
+		obj_desc->package.count = package_list_length;
+	}
+
+	/*
+	 * Allocate the pointer array (array of pointers to the
+	 * individual objects). Add an extra pointer slot so
+	 * that the list is always null terminated.
+	 */
+	obj_desc->package.elements = ACPI_MEM_CALLOCATE (
+			 ((acpi_size) obj_desc->package.count + 1) * sizeof (void *));
+
+	if (!obj_desc->package.elements) {
+		acpi_ut_delete_object_desc (obj_desc);
+		return_ACPI_STATUS (AE_NO_MEMORY);
+	}
+
+	/*
+	 * Now init the elements of the package
+	 */
+	i = 0;
+	arg = op->common.value.arg;
+	arg = arg->common.next;
+	while (arg) {
+		if (arg->common.aml_opcode == AML_INT_RETURN_VALUE_OP) {
+			/* Object (package or buffer) is already built */
+
+			obj_desc->package.elements[i] = ACPI_CAST_PTR (union acpi_operand_object, arg->common.node);
+		}
+		else {
+			status = acpi_ds_build_internal_object (walk_state, arg,
+					  &obj_desc->package.elements[i]);
+		}
+
+		i++;
+		arg = arg->common.next;
+	}
+
+	obj_desc->package.flags |= AOPOBJ_DATA_VALID;
+	op->common.node = (struct acpi_namespace_node *) obj_desc;
+	return_ACPI_STATUS (status);
+}
+
+
+/*****************************************************************************
+ *
+ * FUNCTION:    acpi_ds_create_node
+ *
+ * PARAMETERS:  walk_state      - Current walk state
+ *              Node            - NS Node to be initialized
+ *              Op              - Parser object to be translated
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Create the object to be associated with a namespace node
+ *
+ ****************************************************************************/
+
+acpi_status
+acpi_ds_create_node (
+	struct acpi_walk_state          *walk_state,
+	struct acpi_namespace_node      *node,
+	union acpi_parse_object         *op)
+{
+	acpi_status                     status;
+	union acpi_operand_object       *obj_desc;
+
+
+	ACPI_FUNCTION_TRACE_PTR ("ds_create_node", op);
+
+
+	/*
+	 * Because of the execution pass through the non-control-method
+	 * parts of the table, we can arrive here twice.  Only init
+	 * the named object node the first time through
+	 */
+	if (acpi_ns_get_attached_object (node)) {
+		return_ACPI_STATUS (AE_OK);
+	}
+
+	if (!op->common.value.arg) {
+		/* No arguments, there is nothing to do */
+
+		return_ACPI_STATUS (AE_OK);
+	}
+
+	/* Build an internal object for the argument(s) */
+
+	status = acpi_ds_build_internal_object (walk_state, op->common.value.arg, &obj_desc);
+	if (ACPI_FAILURE (status)) {
+		return_ACPI_STATUS (status);
+	}
+
+	/* Re-type the object according to its argument */
+
+	node->type = ACPI_GET_OBJECT_TYPE (obj_desc);
+
+	/* Attach obj to node */
+
+	status = acpi_ns_attach_object (node, obj_desc, node->type);
+
+	/* Remove local reference to the object */
+
+	acpi_ut_remove_reference (obj_desc);
+	return_ACPI_STATUS (status);
+}
+
+#endif /* ACPI_NO_METHOD_EXECUTION */
+
+
+/*****************************************************************************
+ *
+ * FUNCTION:    acpi_ds_init_object_from_op
+ *
+ * PARAMETERS:  walk_state      - Current walk state
+ *              Op              - Parser op used to init the internal object
+ *              Opcode          - AML opcode associated with the object
+ *              ret_obj_desc    - Namespace object to be initialized
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Initialize a namespace object from a parser Op and its
+ *              associated arguments.  The namespace object is a more compact
+ *              representation of the Op and its arguments.
+ *
+ ****************************************************************************/
+
+acpi_status
+acpi_ds_init_object_from_op (
+	struct acpi_walk_state          *walk_state,
+	union acpi_parse_object         *op,
+	u16                             opcode,
+	union acpi_operand_object       **ret_obj_desc)
+{
+	const struct acpi_opcode_info   *op_info;
+	union acpi_operand_object       *obj_desc;
+	acpi_status                     status = AE_OK;
+
+
+	ACPI_FUNCTION_TRACE ("ds_init_object_from_op");
+
+
+	obj_desc = *ret_obj_desc;
+	op_info = acpi_ps_get_opcode_info (opcode);
+	if (op_info->class == AML_CLASS_UNKNOWN) {
+		/* Unknown opcode */
+
+		return_ACPI_STATUS (AE_TYPE);
+	}
+
+	/* Perform per-object initialization */
+
+	switch (ACPI_GET_OBJECT_TYPE (obj_desc)) {
+	case ACPI_TYPE_BUFFER:
+
+		/*
+		 * Defer evaluation of Buffer term_arg operand
+		 */
+		obj_desc->buffer.node     = (struct acpi_namespace_node *) walk_state->operands[0];
+		obj_desc->buffer.aml_start = op->named.data;
+		obj_desc->buffer.aml_length = op->named.length;
+		break;
+
+
+	case ACPI_TYPE_PACKAGE:
+
+		/*
+		 * Defer evaluation of Package term_arg operand
+		 */
+		obj_desc->package.node     = (struct acpi_namespace_node *) walk_state->operands[0];
+		obj_desc->package.aml_start = op->named.data;
+		obj_desc->package.aml_length = op->named.length;
+		break;
+
+
+	case ACPI_TYPE_INTEGER:
+
+		switch (op_info->type) {
+		case AML_TYPE_CONSTANT:
+			/*
+			 * Resolve AML Constants here - AND ONLY HERE!
+			 * All constants are integers.
+			 * We mark the integer with a flag that indicates that it started life
+			 * as a constant -- so that stores to constants will perform as expected (noop).
+			 * (zero_op is used as a placeholder for optional target operands.)
+			 */
+			obj_desc->common.flags = AOPOBJ_AML_CONSTANT;
+
+			switch (opcode) {
+			case AML_ZERO_OP:
+
+				obj_desc->integer.value = 0;
+				break;
+
+			case AML_ONE_OP:
+
+				obj_desc->integer.value = 1;
+				break;
+
+			case AML_ONES_OP:
+
+				obj_desc->integer.value = ACPI_INTEGER_MAX;
+
+				/* Truncate value if we are executing from a 32-bit ACPI table */
+
+#ifndef ACPI_NO_METHOD_EXECUTION
+				acpi_ex_truncate_for32bit_table (obj_desc);
+#endif
+				break;
+
+			case AML_REVISION_OP:
+
+				obj_desc->integer.value = ACPI_CA_VERSION;
+				break;
+
+			default:
+
+				ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "Unknown constant opcode %X\n", opcode));
+				status = AE_AML_OPERAND_TYPE;
+				break;
+			}
+			break;
+
+
+		case AML_TYPE_LITERAL:
+
+			obj_desc->integer.value = op->common.value.integer;
+			break;
+
+
+		default:
+			ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "Unknown Integer type %X\n", op_info->type));
+			status = AE_AML_OPERAND_TYPE;
+			break;
+		}
+		break;
+
+
+	case ACPI_TYPE_STRING:
+
+		obj_desc->string.pointer = op->common.value.string;
+		obj_desc->string.length = (u32) ACPI_STRLEN (op->common.value.string);
+
+		/*
+		 * The string is contained in the ACPI table, don't ever try
+		 * to delete it
+		 */
+		obj_desc->common.flags |= AOPOBJ_STATIC_POINTER;
+		break;
+
+
+	case ACPI_TYPE_METHOD:
+		break;
+
+
+	case ACPI_TYPE_LOCAL_REFERENCE:
+
+		switch (op_info->type) {
+		case AML_TYPE_LOCAL_VARIABLE:
+
+			/* Split the opcode into a base opcode + offset */
+
+			obj_desc->reference.opcode = AML_LOCAL_OP;
+			obj_desc->reference.offset = opcode - AML_LOCAL_OP;
+
+#ifndef ACPI_NO_METHOD_EXECUTION
+			status = acpi_ds_method_data_get_node (AML_LOCAL_OP, obj_desc->reference.offset,
+					 walk_state, (struct acpi_namespace_node **) &obj_desc->reference.object);
+#endif
+			break;
+
+
+		case AML_TYPE_METHOD_ARGUMENT:
+
+			/* Split the opcode into a base opcode + offset */
+
+			obj_desc->reference.opcode = AML_ARG_OP;
+			obj_desc->reference.offset = opcode - AML_ARG_OP;
+
+#ifndef ACPI_NO_METHOD_EXECUTION
+			status = acpi_ds_method_data_get_node (AML_ARG_OP, obj_desc->reference.offset,
+					 walk_state, (struct acpi_namespace_node **) &obj_desc->reference.object);
+#endif
+			break;
+
+		default: /* Other literals, etc.. */
+
+			if (op->common.aml_opcode == AML_INT_NAMEPATH_OP) {
+				/* Node was saved in Op */
+
+				obj_desc->reference.node = op->common.node;
+			}
+
+			obj_desc->reference.opcode = opcode;
+			break;
+		}
+		break;
+
+
+	default:
+
+		ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "Unimplemented data type: %X\n",
+			ACPI_GET_OBJECT_TYPE (obj_desc)));
+
+		status = AE_AML_OPERAND_TYPE;
+		break;
+	}
+
+	return_ACPI_STATUS (status);
+}
+
+
diff --git a/drivers/acpi/dispatcher/dsopcode.c b/drivers/acpi/dispatcher/dsopcode.c
new file mode 100644
index 00000000000..5c987a0e7b7
--- /dev/null
+++ b/drivers/acpi/dispatcher/dsopcode.c
@@ -0,0 +1,1151 @@
+/******************************************************************************
+ *
+ * Module Name: dsopcode - Dispatcher Op Region support and handling of
+ *                         "control" opcodes
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2005, R. Byron Moore
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+
+#include <acpi/acpi.h>
+#include <acpi/acparser.h>
+#include <acpi/amlcode.h>
+#include <acpi/acdispat.h>
+#include <acpi/acinterp.h>
+#include <acpi/acnamesp.h>
+#include <acpi/acevents.h>
+
+#define _COMPONENT          ACPI_DISPATCHER
+	 ACPI_MODULE_NAME    ("dsopcode")
+
+
+/*****************************************************************************
+ *
+ * FUNCTION:    acpi_ds_execute_arguments
+ *
+ * PARAMETERS:  Node                - Parent NS node
+ *              aml_length          - Length of executable AML
+ *              aml_start           - Pointer to the AML
+ *
+ * RETURN:      Status.
+ *
+ * DESCRIPTION: Late (deferred) execution of region or field arguments
+ *
+ ****************************************************************************/
+
+acpi_status
+acpi_ds_execute_arguments (
+	struct acpi_namespace_node      *node,
+	struct acpi_namespace_node      *scope_node,
+	u32                             aml_length,
+	u8                              *aml_start)
+{
+	acpi_status                     status;
+	union acpi_parse_object         *op;
+	struct acpi_walk_state          *walk_state;
+
+
+	ACPI_FUNCTION_TRACE ("ds_execute_arguments");
+
+
+	/*
+	 * Allocate a new parser op to be the root of the parsed tree
+	 */
+	op = acpi_ps_alloc_op (AML_INT_EVAL_SUBTREE_OP);
+	if (!op) {
+		return_ACPI_STATUS (AE_NO_MEMORY);
+	}
+
+	/* Save the Node for use in acpi_ps_parse_aml */
+
+	op->common.node = scope_node;
+
+	/* Create and initialize a new parser state */
+
+	walk_state = acpi_ds_create_walk_state (0, NULL, NULL, NULL);
+	if (!walk_state) {
+		return_ACPI_STATUS (AE_NO_MEMORY);
+	}
+
+	status = acpi_ds_init_aml_walk (walk_state, op, NULL, aml_start,
+			  aml_length, NULL, 1);
+	if (ACPI_FAILURE (status)) {
+		acpi_ds_delete_walk_state (walk_state);
+		return_ACPI_STATUS (status);
+	}
+
+	/* Mark this parse as a deferred opcode */
+
+	walk_state->parse_flags = ACPI_PARSE_DEFERRED_OP;
+	walk_state->deferred_node = node;
+
+	/* Pass1: Parse the entire declaration */
+
+	status = acpi_ps_parse_aml (walk_state);
+	if (ACPI_FAILURE (status)) {
+		acpi_ps_delete_parse_tree (op);
+		return_ACPI_STATUS (status);
+	}
+
+	/* Get and init the Op created above */
+
+	op->common.node = node;
+	acpi_ps_delete_parse_tree (op);
+
+	/* Evaluate the deferred arguments */
+
+	op = acpi_ps_alloc_op (AML_INT_EVAL_SUBTREE_OP);
+	if (!op) {
+		return_ACPI_STATUS (AE_NO_MEMORY);
+	}
+
+	op->common.node = scope_node;
+
+	/* Create and initialize a new parser state */
+
+	walk_state = acpi_ds_create_walk_state (0, NULL, NULL, NULL);
+	if (!walk_state) {
+		return_ACPI_STATUS (AE_NO_MEMORY);
+	}
+
+	/* Execute the opcode and arguments */
+
+	status = acpi_ds_init_aml_walk (walk_state, op, NULL, aml_start,
+			  aml_length, NULL, 3);
+	if (ACPI_FAILURE (status)) {
+		acpi_ds_delete_walk_state (walk_state);
+		return_ACPI_STATUS (status);
+	}
+
+	/* Mark this execution as a deferred opcode */
+
+	walk_state->deferred_node = node;
+	status = acpi_ps_parse_aml (walk_state);
+	acpi_ps_delete_parse_tree (op);
+	return_ACPI_STATUS (status);
+}
+
+
+/*****************************************************************************
+ *
+ * FUNCTION:    acpi_ds_get_buffer_field_arguments
+ *
+ * PARAMETERS:  obj_desc        - A valid buffer_field object
+ *
+ * RETURN:      Status.
+ *
+ * DESCRIPTION: Get buffer_field Buffer and Index. This implements the late
+ *              evaluation of these field attributes.
+ *
+ ****************************************************************************/
+
+acpi_status
+acpi_ds_get_buffer_field_arguments (
+	union acpi_operand_object       *obj_desc)
+{
+	union acpi_operand_object       *extra_desc;
+	struct acpi_namespace_node      *node;
+	acpi_status                     status;
+
+
+	ACPI_FUNCTION_TRACE_PTR ("ds_get_buffer_field_arguments", obj_desc);
+
+
+	if (obj_desc->common.flags & AOPOBJ_DATA_VALID) {
+		return_ACPI_STATUS (AE_OK);
+	}
+
+	/* Get the AML pointer (method object) and buffer_field node */
+
+	extra_desc = acpi_ns_get_secondary_object (obj_desc);
+	node = obj_desc->buffer_field.node;
+
+	ACPI_DEBUG_EXEC(acpi_ut_display_init_pathname (ACPI_TYPE_BUFFER_FIELD, node, NULL));
+	ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "[%4.4s] buffer_field Arg Init\n",
+		acpi_ut_get_node_name (node)));
+
+	/* Execute the AML code for the term_arg arguments */
+
+	status = acpi_ds_execute_arguments (node, acpi_ns_get_parent_node (node),
+			 extra_desc->extra.aml_length, extra_desc->extra.aml_start);
+	return_ACPI_STATUS (status);
+}
+
+
+/*****************************************************************************
+ *
+ * FUNCTION:    acpi_ds_get_buffer_arguments
+ *
+ * PARAMETERS:  obj_desc        - A valid Buffer object
+ *
+ * RETURN:      Status.
+ *
+ * DESCRIPTION: Get Buffer length and initializer byte list.  This implements
+ *              the late evaluation of these attributes.
+ *
+ ****************************************************************************/
+
+acpi_status
+acpi_ds_get_buffer_arguments (
+	union acpi_operand_object       *obj_desc)
+{
+	struct acpi_namespace_node      *node;
+	acpi_status                     status;
+
+
+	ACPI_FUNCTION_TRACE_PTR ("ds_get_buffer_arguments", obj_desc);
+
+
+	if (obj_desc->common.flags & AOPOBJ_DATA_VALID) {
+		return_ACPI_STATUS (AE_OK);
+	}
+
+	/* Get the Buffer node */
+
+	node = obj_desc->buffer.node;
+	if (!node) {
+		ACPI_REPORT_ERROR ((
+				"No pointer back to NS node in buffer obj %p\n", obj_desc));
+		return_ACPI_STATUS (AE_AML_INTERNAL);
+	}
+
+	ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "Buffer Arg Init\n"));
+
+	/* Execute the AML code for the term_arg arguments */
+
+	status = acpi_ds_execute_arguments (node, node,
+			 obj_desc->buffer.aml_length, obj_desc->buffer.aml_start);
+	return_ACPI_STATUS (status);
+}
+
+
+/*****************************************************************************
+ *
+ * FUNCTION:    acpi_ds_get_package_arguments
+ *
+ * PARAMETERS:  obj_desc        - A valid Package object
+ *
+ * RETURN:      Status.
+ *
+ * DESCRIPTION: Get Package length and initializer byte list.  This implements
+ *              the late evaluation of these attributes.
+ *
+ ****************************************************************************/
+
+acpi_status
+acpi_ds_get_package_arguments (
+	union acpi_operand_object       *obj_desc)
+{
+	struct acpi_namespace_node      *node;
+	acpi_status                     status;
+
+
+	ACPI_FUNCTION_TRACE_PTR ("ds_get_package_arguments", obj_desc);
+
+
+	if (obj_desc->common.flags & AOPOBJ_DATA_VALID) {
+		return_ACPI_STATUS (AE_OK);
+	}
+
+	/* Get the Package node */
+
+	node = obj_desc->package.node;
+	if (!node) {
+		ACPI_REPORT_ERROR ((
+				"No pointer back to NS node in package %p\n", obj_desc));
+		return_ACPI_STATUS (AE_AML_INTERNAL);
+	}
+
+	ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "Package Arg Init\n"));
+
+	/* Execute the AML code for the term_arg arguments */
+
+	status = acpi_ds_execute_arguments (node, node,
+			 obj_desc->package.aml_length, obj_desc->package.aml_start);
+	return_ACPI_STATUS (status);
+}
+
+
+/*****************************************************************************
+ *
+ * FUNCTION:    acpi_ds_get_region_arguments
+ *
+ * PARAMETERS:  obj_desc        - A valid region object
+ *
+ * RETURN:      Status.
+ *
+ * DESCRIPTION: Get region address and length.  This implements the late
+ *              evaluation of these region attributes.
+ *
+ ****************************************************************************/
+
+acpi_status
+acpi_ds_get_region_arguments (
+	union acpi_operand_object       *obj_desc)
+{
+	struct acpi_namespace_node      *node;
+	acpi_status                     status;
+	union acpi_operand_object       *extra_desc;
+
+
+	ACPI_FUNCTION_TRACE_PTR ("ds_get_region_arguments", obj_desc);
+
+
+	if (obj_desc->region.flags & AOPOBJ_DATA_VALID) {
+		return_ACPI_STATUS (AE_OK);
+	}
+
+	extra_desc = acpi_ns_get_secondary_object (obj_desc);
+	if (!extra_desc) {
+		return_ACPI_STATUS (AE_NOT_EXIST);
+	}
+
+	/* Get the Region node */
+
+	node = obj_desc->region.node;
+
+	ACPI_DEBUG_EXEC (acpi_ut_display_init_pathname (ACPI_TYPE_REGION, node, NULL));
+
+	ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "[%4.4s] op_region Arg Init at AML %p\n",
+		acpi_ut_get_node_name (node), extra_desc->extra.aml_start));
+
+	/* Execute the argument AML */
+
+	status = acpi_ds_execute_arguments (node, acpi_ns_get_parent_node (node),
+			 extra_desc->extra.aml_length, extra_desc->extra.aml_start);
+	return_ACPI_STATUS (status);
+}
+
+
+/*****************************************************************************
+ *
+ * FUNCTION:    acpi_ds_initialize_region
+ *
+ * PARAMETERS:  Op              - A valid region Op object
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Front end to ev_initialize_region
+ *
+ ****************************************************************************/
+
+acpi_status
+acpi_ds_initialize_region (
+	acpi_handle                     obj_handle)
+{
+	union acpi_operand_object       *obj_desc;
+	acpi_status                     status;
+
+
+	obj_desc = acpi_ns_get_attached_object (obj_handle);
+
+	/* Namespace is NOT locked */
+
+	status = acpi_ev_initialize_region (obj_desc, FALSE);
+	return (status);
+}
+
+
+/*****************************************************************************
+ *
+ * FUNCTION:    acpi_ds_init_buffer_field
+ *
+ * PARAMETERS:  aml_opcode      - create_xxx_field
+ *              obj_desc        - buffer_field object
+ *              buffer_desc     - Host Buffer
+ *              offset_desc     - Offset into buffer
+ *              Length          - Length of field (CREATE_FIELD_OP only)
+ *              Result          - Where to store the result
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Perform actual initialization of a buffer field
+ *
+ ****************************************************************************/
+
+acpi_status
+acpi_ds_init_buffer_field (
+	u16                             aml_opcode,
+	union acpi_operand_object       *obj_desc,
+	union acpi_operand_object       *buffer_desc,
+	union acpi_operand_object       *offset_desc,
+	union acpi_operand_object       *length_desc,
+	union acpi_operand_object       *result_desc)
+{
+	u32                             offset;
+	u32                             bit_offset;
+	u32                             bit_count;
+	u8                              field_flags;
+	acpi_status                     status;
+
+
+	ACPI_FUNCTION_TRACE_PTR ("ds_init_buffer_field", obj_desc);
+
+
+	/* Host object must be a Buffer */
+
+	if (ACPI_GET_OBJECT_TYPE (buffer_desc) != ACPI_TYPE_BUFFER) {
+		ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
+			"Target of Create Field is not a Buffer object - %s\n",
+			acpi_ut_get_object_type_name (buffer_desc)));
+
+		status = AE_AML_OPERAND_TYPE;
+		goto cleanup;
+	}
+
+	/*
+	 * The last parameter to all of these opcodes (result_desc) started
+	 * out as a name_string, and should therefore now be a NS node
+	 * after resolution in acpi_ex_resolve_operands().
+	 */
+	if (ACPI_GET_DESCRIPTOR_TYPE (result_desc) != ACPI_DESC_TYPE_NAMED) {
+		ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "(%s) destination not a NS Node [%s]\n",
+				acpi_ps_get_opcode_name (aml_opcode), acpi_ut_get_descriptor_name (result_desc)));
+
+		status = AE_AML_OPERAND_TYPE;
+		goto cleanup;
+	}
+
+	offset = (u32) offset_desc->integer.value;
+
+	/*
+	 * Setup the Bit offsets and counts, according to the opcode
+	 */
+	switch (aml_opcode) {
+	case AML_CREATE_FIELD_OP:
+
+		/* Offset is in bits, count is in bits */
+
+		bit_offset = offset;
+		bit_count  = (u32) length_desc->integer.value;
+		field_flags = AML_FIELD_ACCESS_BYTE;
+		break;
+
+	case AML_CREATE_BIT_FIELD_OP:
+
+		/* Offset is in bits, Field is one bit */
+
+		bit_offset = offset;
+		bit_count  = 1;
+		field_flags = AML_FIELD_ACCESS_BYTE;
+		break;
+
+	case AML_CREATE_BYTE_FIELD_OP:
+
+		/* Offset is in bytes, field is one byte */
+
+		bit_offset = 8 * offset;
+		bit_count  = 8;
+		field_flags = AML_FIELD_ACCESS_BYTE;
+		break;
+
+	case AML_CREATE_WORD_FIELD_OP:
+
+		/* Offset is in bytes, field is one word */
+
+		bit_offset = 8 * offset;
+		bit_count  = 16;
+		field_flags = AML_FIELD_ACCESS_WORD;
+		break;
+
+	case AML_CREATE_DWORD_FIELD_OP:
+
+		/* Offset is in bytes, field is one dword */
+
+		bit_offset = 8 * offset;
+		bit_count  = 32;
+		field_flags = AML_FIELD_ACCESS_DWORD;
+		break;
+
+	case AML_CREATE_QWORD_FIELD_OP:
+
+		/* Offset is in bytes, field is one qword */
+
+		bit_offset = 8 * offset;
+		bit_count  = 64;
+		field_flags = AML_FIELD_ACCESS_QWORD;
+		break;
+
+	default:
+
+		ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
+			"Unknown field creation opcode %02x\n",
+			aml_opcode));
+		status = AE_AML_BAD_OPCODE;
+		goto cleanup;
+	}
+
+	/* Entire field must fit within the current length of the buffer */
+
+	if ((bit_offset + bit_count) >
+		(8 * (u32) buffer_desc->buffer.length)) {
+		ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
+			"Field [%4.4s] size %d exceeds Buffer [%4.4s] size %d (bits)\n",
+			 acpi_ut_get_node_name (result_desc),
+			 bit_offset + bit_count,
+			 acpi_ut_get_node_name (buffer_desc->buffer.node),
+			 8 * (u32) buffer_desc->buffer.length));
+		status = AE_AML_BUFFER_LIMIT;
+		goto cleanup;
+	}
+
+	/*
+	 * Initialize areas of the field object that are common to all fields
+	 * For field_flags, use LOCK_RULE = 0 (NO_LOCK), UPDATE_RULE = 0 (UPDATE_PRESERVE)
+	 */
+	status = acpi_ex_prep_common_field_object (obj_desc, field_flags, 0,
+			  bit_offset, bit_count);
+	if (ACPI_FAILURE (status)) {
+		goto cleanup;
+	}
+
+	obj_desc->buffer_field.buffer_obj = buffer_desc;
+
+	/* Reference count for buffer_desc inherits obj_desc count */
+
+	buffer_desc->common.reference_count = (u16) (buffer_desc->common.reference_count +
+			  obj_desc->common.reference_count);
+
+
+cleanup:
+
+	/* Always delete the operands */
+
+	acpi_ut_remove_reference (offset_desc);
+	acpi_ut_remove_reference (buffer_desc);
+
+	if (aml_opcode == AML_CREATE_FIELD_OP) {
+		acpi_ut_remove_reference (length_desc);
+	}
+
+	/* On failure, delete the result descriptor */
+
+	if (ACPI_FAILURE (status)) {
+		acpi_ut_remove_reference (result_desc); /* Result descriptor */
+	}
+	else {
+		/* Now the address and length are valid for this buffer_field */
+
+		obj_desc->buffer_field.flags |= AOPOBJ_DATA_VALID;
+	}
+
+	return_ACPI_STATUS (status);
+}
+
+
+/*****************************************************************************
+ *
+ * FUNCTION:    acpi_ds_eval_buffer_field_operands
+ *
+ * PARAMETERS:  walk_state      - Current walk
+ *              Op              - A valid buffer_field Op object
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Get buffer_field Buffer and Index
+ *              Called from acpi_ds_exec_end_op during buffer_field parse tree walk
+ *
+ ****************************************************************************/
+
+acpi_status
+acpi_ds_eval_buffer_field_operands (
+	struct acpi_walk_state          *walk_state,
+	union acpi_parse_object         *op)
+{
+	acpi_status                     status;
+	union acpi_operand_object       *obj_desc;
+	struct acpi_namespace_node      *node;
+	union acpi_parse_object         *next_op;
+
+
+	ACPI_FUNCTION_TRACE_PTR ("ds_eval_buffer_field_operands", op);
+
+
+	/*
+	 * This is where we evaluate the address and length fields of the
+	 * create_xxx_field declaration
+	 */
+	node =  op->common.node;
+
+	/* next_op points to the op that holds the Buffer */
+
+	next_op = op->common.value.arg;
+
+	/* Evaluate/create the address and length operands */
+
+	status = acpi_ds_create_operands (walk_state, next_op);
+	if (ACPI_FAILURE (status)) {
+		return_ACPI_STATUS (status);
+	}
+
+	obj_desc = acpi_ns_get_attached_object (node);
+	if (!obj_desc) {
+		return_ACPI_STATUS (AE_NOT_EXIST);
+	}
+
+	/* Resolve the operands */
+
+	status = acpi_ex_resolve_operands (op->common.aml_opcode,
+			  ACPI_WALK_OPERANDS, walk_state);
+
+	ACPI_DUMP_OPERANDS (ACPI_WALK_OPERANDS, ACPI_IMODE_EXECUTE,
+			  acpi_ps_get_opcode_name (op->common.aml_opcode),
+			  walk_state->num_operands, "after acpi_ex_resolve_operands");
+
+	if (ACPI_FAILURE (status)) {
+		ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "(%s) bad operand(s) (%X)\n",
+			acpi_ps_get_opcode_name (op->common.aml_opcode), status));
+
+		return_ACPI_STATUS (status);
+	}
+
+	/* Initialize the Buffer Field */
+
+	if (op->common.aml_opcode == AML_CREATE_FIELD_OP) {
+		/* NOTE: Slightly different operands for this opcode */
+
+		status = acpi_ds_init_buffer_field (op->common.aml_opcode, obj_desc,
+				 walk_state->operands[0], walk_state->operands[1],
+				 walk_state->operands[2], walk_state->operands[3]);
+	}
+	else {
+		/* All other, create_xxx_field opcodes */
+
+		status = acpi_ds_init_buffer_field (op->common.aml_opcode, obj_desc,
+				 walk_state->operands[0], walk_state->operands[1],
+						  NULL, walk_state->operands[2]);
+	}
+
+	return_ACPI_STATUS (status);
+}
+
+
+/*****************************************************************************
+ *
+ * FUNCTION:    acpi_ds_eval_region_operands
+ *
+ * PARAMETERS:  walk_state      - Current walk
+ *              Op              - A valid region Op object
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Get region address and length
+ *              Called from acpi_ds_exec_end_op during op_region parse tree walk
+ *
+ ****************************************************************************/
+
+acpi_status
+acpi_ds_eval_region_operands (
+	struct acpi_walk_state          *walk_state,
+	union acpi_parse_object         *op)
+{
+	acpi_status                     status;
+	union acpi_operand_object       *obj_desc;
+	union acpi_operand_object       *operand_desc;
+	struct acpi_namespace_node      *node;
+	union acpi_parse_object         *next_op;
+
+
+	ACPI_FUNCTION_TRACE_PTR ("ds_eval_region_operands", op);
+
+
+	/*
+	 * This is where we evaluate the address and length fields of the op_region declaration
+	 */
+	node =  op->common.node;
+
+	/* next_op points to the op that holds the space_iD */
+
+	next_op = op->common.value.arg;
+
+	/* next_op points to address op */
+
+	next_op = next_op->common.next;
+
+	/* Evaluate/create the address and length operands */
+
+	status = acpi_ds_create_operands (walk_state, next_op);
+	if (ACPI_FAILURE (status)) {
+		return_ACPI_STATUS (status);
+	}
+
+	/* Resolve the length and address operands to numbers */
+
+	status = acpi_ex_resolve_operands (op->common.aml_opcode, ACPI_WALK_OPERANDS, walk_state);
+	if (ACPI_FAILURE (status)) {
+		return_ACPI_STATUS (status);
+	}
+
+	ACPI_DUMP_OPERANDS (ACPI_WALK_OPERANDS, ACPI_IMODE_EXECUTE,
+			  acpi_ps_get_opcode_name (op->common.aml_opcode),
+			  1, "after acpi_ex_resolve_operands");
+
+	obj_desc = acpi_ns_get_attached_object (node);
+	if (!obj_desc) {
+		return_ACPI_STATUS (AE_NOT_EXIST);
+	}
+
+	/*
+	 * Get the length operand and save it
+	 * (at Top of stack)
+	 */
+	operand_desc = walk_state->operands[walk_state->num_operands - 1];
+
+	obj_desc->region.length = (u32) operand_desc->integer.value;
+	acpi_ut_remove_reference (operand_desc);
+
+	/*
+	 * Get the address and save it
+	 * (at top of stack - 1)
+	 */
+	operand_desc = walk_state->operands[walk_state->num_operands - 2];
+
+	obj_desc->region.address = (acpi_physical_address) operand_desc->integer.value;
+	acpi_ut_remove_reference (operand_desc);
+
+	ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "rgn_obj %p Addr %8.8X%8.8X Len %X\n",
+		obj_desc,
+		ACPI_FORMAT_UINT64 (obj_desc->region.address),
+		obj_desc->region.length));
+
+	/* Now the address and length are valid for this opregion */
+
+	obj_desc->region.flags |= AOPOBJ_DATA_VALID;
+
+	return_ACPI_STATUS (status);
+}
+
+
+/*****************************************************************************
+ *
+ * FUNCTION:    acpi_ds_eval_data_object_operands
+ *
+ * PARAMETERS:  walk_state      - Current walk
+ *              Op              - A valid data_object Op object
+ *              obj_desc        - data_object
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Get the operands and complete the following data object types:
+ *              Buffer, Package.
+ *
+ ****************************************************************************/
+
+acpi_status
+acpi_ds_eval_data_object_operands (
+	struct acpi_walk_state          *walk_state,
+	union acpi_parse_object         *op,
+	union acpi_operand_object       *obj_desc)
+{
+	acpi_status                     status;
+	union acpi_operand_object       *arg_desc;
+	u32                             length;
+
+
+	ACPI_FUNCTION_TRACE ("ds_eval_data_object_operands");
+
+
+	/* The first operand (for all of these data objects) is the length */
+
+	status = acpi_ds_create_operand (walk_state, op->common.value.arg, 1);
+	if (ACPI_FAILURE (status)) {
+		return_ACPI_STATUS (status);
+	}
+
+	status = acpi_ex_resolve_operands (walk_state->opcode,
+			  &(walk_state->operands [walk_state->num_operands -1]),
+			  walk_state);
+	if (ACPI_FAILURE (status)) {
+		return_ACPI_STATUS (status);
+	}
+
+	/* Extract length operand */
+
+	arg_desc = walk_state->operands [walk_state->num_operands - 1];
+	length = (u32) arg_desc->integer.value;
+
+	/* Cleanup for length operand */
+
+	status = acpi_ds_obj_stack_pop (1, walk_state);
+	if (ACPI_FAILURE (status)) {
+		return_ACPI_STATUS (status);
+	}
+
+	acpi_ut_remove_reference (arg_desc);
+
+	/*
+	 * Create the actual data object
+	 */
+	switch (op->common.aml_opcode) {
+	case AML_BUFFER_OP:
+
+		status = acpi_ds_build_internal_buffer_obj (walk_state, op, length, &obj_desc);
+		break;
+
+	case AML_PACKAGE_OP:
+	case AML_VAR_PACKAGE_OP:
+
+		status = acpi_ds_build_internal_package_obj (walk_state, op, length, &obj_desc);
+		break;
+
+	default:
+		return_ACPI_STATUS (AE_AML_BAD_OPCODE);
+	}
+
+	if (ACPI_SUCCESS (status)) {
+		/*
+		 * Return the object in the walk_state, unless the parent is a package --
+		 * in this case, the return object will be stored in the parse tree
+		 * for the package.
+		 */
+		if ((!op->common.parent) ||
+			((op->common.parent->common.aml_opcode != AML_PACKAGE_OP) &&
+			 (op->common.parent->common.aml_opcode != AML_VAR_PACKAGE_OP) &&
+			 (op->common.parent->common.aml_opcode != AML_NAME_OP))) {
+			walk_state->result_obj = obj_desc;
+		}
+	}
+
+	return_ACPI_STATUS (status);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_exec_begin_control_op
+ *
+ * PARAMETERS:  walk_list       - The list that owns the walk stack
+ *              Op              - The control Op
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Handles all control ops encountered during control method
+ *              execution.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ds_exec_begin_control_op (
+	struct acpi_walk_state          *walk_state,
+	union acpi_parse_object         *op)
+{
+	acpi_status                     status = AE_OK;
+	union acpi_generic_state        *control_state;
+
+
+	ACPI_FUNCTION_NAME ("ds_exec_begin_control_op");
+
+
+	ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH, "Op=%p Opcode=%2.2X State=%p\n", op,
+		op->common.aml_opcode, walk_state));
+
+	switch (op->common.aml_opcode) {
+	case AML_IF_OP:
+	case AML_WHILE_OP:
+
+		/*
+		 * IF/WHILE: Create a new control state to manage these
+		 * constructs. We need to manage these as a stack, in order
+		 * to handle nesting.
+		 */
+		control_state = acpi_ut_create_control_state ();
+		if (!control_state) {
+			status = AE_NO_MEMORY;
+			break;
+		}
+		/*
+		 * Save a pointer to the predicate for multiple executions
+		 * of a loop
+		 */
+		control_state->control.aml_predicate_start = walk_state->parser_state.aml - 1;
+		control_state->control.package_end = walk_state->parser_state.pkg_end;
+		control_state->control.opcode = op->common.aml_opcode;
+
+
+		/* Push the control state on this walk's control stack */
+
+		acpi_ut_push_generic_state (&walk_state->control_state, control_state);
+		break;
+
+	case AML_ELSE_OP:
+
+		/* Predicate is in the state object */
+		/* If predicate is true, the IF was executed, ignore ELSE part */
+
+		if (walk_state->last_predicate) {
+			status = AE_CTRL_TRUE;
+		}
+
+		break;
+
+	case AML_RETURN_OP:
+
+		break;
+
+	default:
+		break;
+	}
+
+	return (status);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_exec_end_control_op
+ *
+ * PARAMETERS:  walk_list       - The list that owns the walk stack
+ *              Op              - The control Op
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Handles all control ops encountered during control method
+ *              execution.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ds_exec_end_control_op (
+	struct acpi_walk_state          *walk_state,
+	union acpi_parse_object         *op)
+{
+	acpi_status                     status = AE_OK;
+	union acpi_generic_state        *control_state;
+
+
+	ACPI_FUNCTION_NAME ("ds_exec_end_control_op");
+
+
+	switch (op->common.aml_opcode) {
+	case AML_IF_OP:
+
+		ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH, "[IF_OP] Op=%p\n", op));
+
+		/*
+		 * Save the result of the predicate in case there is an
+		 * ELSE to come
+		 */
+		walk_state->last_predicate =
+			(u8) walk_state->control_state->common.value;
+
+		/*
+		 * Pop the control state that was created at the start
+		 * of the IF and free it
+		 */
+		control_state = acpi_ut_pop_generic_state (&walk_state->control_state);
+		acpi_ut_delete_generic_state (control_state);
+		break;
+
+
+	case AML_ELSE_OP:
+
+		break;
+
+
+	case AML_WHILE_OP:
+
+		ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH, "[WHILE_OP] Op=%p\n", op));
+
+		if (walk_state->control_state->common.value) {
+			/* Predicate was true, go back and evaluate it again! */
+
+			status = AE_CTRL_PENDING;
+		}
+
+		ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH, "[WHILE_OP] termination! Op=%p\n", op));
+
+		/* Pop this control state and free it */
+
+		control_state = acpi_ut_pop_generic_state (&walk_state->control_state);
+
+		walk_state->aml_last_while = control_state->control.aml_predicate_start;
+		acpi_ut_delete_generic_state (control_state);
+		break;
+
+
+	case AML_RETURN_OP:
+
+		ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH,
+			"[RETURN_OP] Op=%p Arg=%p\n",op, op->common.value.arg));
+
+		/*
+		 * One optional operand -- the return value
+		 * It can be either an immediate operand or a result that
+		 * has been bubbled up the tree
+		 */
+		if (op->common.value.arg) {
+			/* Since we have a real Return(), delete any implicit return */
+
+			acpi_ds_clear_implicit_return (walk_state);
+
+			/* Return statement has an immediate operand */
+
+			status = acpi_ds_create_operands (walk_state, op->common.value.arg);
+			if (ACPI_FAILURE (status)) {
+				return (status);
+			}
+
+			/*
+			 * If value being returned is a Reference (such as
+			 * an arg or local), resolve it now because it may
+			 * cease to exist at the end of the method.
+			 */
+			status = acpi_ex_resolve_to_value (&walk_state->operands [0], walk_state);
+			if (ACPI_FAILURE (status)) {
+				return (status);
+			}
+
+			/*
+			 * Get the return value and save as the last result
+			 * value.  This is the only place where walk_state->return_desc
+			 * is set to anything other than zero!
+			 */
+			walk_state->return_desc = walk_state->operands[0];
+		}
+		else if ((walk_state->results) &&
+				 (walk_state->results->results.num_results > 0)) {
+			/* Since we have a real Return(), delete any implicit return */
+
+			acpi_ds_clear_implicit_return (walk_state);
+
+			/*
+			 * The return value has come from a previous calculation.
+			 *
+			 * If value being returned is a Reference (such as
+			 * an arg or local), resolve it now because it may
+			 * cease to exist at the end of the method.
+			 *
+			 * Allow references created by the Index operator to return unchanged.
+			 */
+			if ((ACPI_GET_DESCRIPTOR_TYPE (walk_state->results->results.obj_desc[0]) == ACPI_DESC_TYPE_OPERAND) &&
+				(ACPI_GET_OBJECT_TYPE (walk_state->results->results.obj_desc [0]) == ACPI_TYPE_LOCAL_REFERENCE) &&
+				((walk_state->results->results.obj_desc [0])->reference.opcode != AML_INDEX_OP)) {
+				status = acpi_ex_resolve_to_value (&walk_state->results->results.obj_desc [0], walk_state);
+				if (ACPI_FAILURE (status)) {
+					return (status);
+				}
+			}
+
+			walk_state->return_desc = walk_state->results->results.obj_desc [0];
+		}
+		else {
+			/* No return operand */
+
+			if (walk_state->num_operands) {
+				acpi_ut_remove_reference (walk_state->operands [0]);
+			}
+
+			walk_state->operands [0]    = NULL;
+			walk_state->num_operands    = 0;
+			walk_state->return_desc     = NULL;
+		}
+
+
+		ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH,
+			"Completed RETURN_OP State=%p, ret_val=%p\n",
+			walk_state, walk_state->return_desc));
+
+		/* End the control method execution right now */
+
+		status = AE_CTRL_TERMINATE;
+		break;
+
+
+	case AML_NOOP_OP:
+
+		/* Just do nothing! */
+		break;
+
+
+	case AML_BREAK_POINT_OP:
+
+		/* Call up to the OS service layer to handle this */
+
+		status = acpi_os_signal (ACPI_SIGNAL_BREAKPOINT, "Executed AML Breakpoint opcode");
+
+		/* If and when it returns, all done. */
+
+		break;
+
+
+	case AML_BREAK_OP:
+	case AML_CONTINUE_OP: /* ACPI 2.0 */
+
+
+		/* Pop and delete control states until we find a while */
+
+		while (walk_state->control_state &&
+				(walk_state->control_state->control.opcode != AML_WHILE_OP)) {
+			control_state = acpi_ut_pop_generic_state (&walk_state->control_state);
+			acpi_ut_delete_generic_state (control_state);
+		}
+
+		/* No while found? */
+
+		if (!walk_state->control_state) {
+			return (AE_AML_NO_WHILE);
+		}
+
+		/* Was: walk_state->aml_last_while = walk_state->control_state->Control.aml_predicate_start; */
+
+		walk_state->aml_last_while = walk_state->control_state->control.package_end;
+
+		/* Return status depending on opcode */
+
+		if (op->common.aml_opcode == AML_BREAK_OP) {
+			status = AE_CTRL_BREAK;
+		}
+		else {
+			status = AE_CTRL_CONTINUE;
+		}
+		break;
+
+
+	default:
+
+		ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "Unknown control opcode=%X Op=%p\n",
+			op->common.aml_opcode, op));
+
+		status = AE_AML_BAD_OPCODE;
+		break;
+	}
+
+	return (status);
+}
+
diff --git a/drivers/acpi/dispatcher/dsutils.c b/drivers/acpi/dispatcher/dsutils.c
new file mode 100644
index 00000000000..462c5d83e74
--- /dev/null
+++ b/drivers/acpi/dispatcher/dsutils.c
@@ -0,0 +1,744 @@
+/*******************************************************************************
+ *
+ * Module Name: dsutils - Dispatcher utilities
+ *
+ ******************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2005, R. Byron Moore
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+
+#include <acpi/acpi.h>
+#include <acpi/acparser.h>
+#include <acpi/amlcode.h>
+#include <acpi/acdispat.h>
+#include <acpi/acinterp.h>
+#include <acpi/acnamesp.h>
+#include <acpi/acdebug.h>
+
+#define _COMPONENT          ACPI_DISPATCHER
+	 ACPI_MODULE_NAME    ("dsutils")
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_clear_implicit_return
+ *
+ * PARAMETERS:  walk_state          - Current State
+ *
+ * RETURN:      None.
+ *
+ * DESCRIPTION: Clear and remove a reference on an implicit return value.  Used
+ *              to delete "stale" return values (if enabled, the return value
+ *              from every operator is saved at least momentarily, in case the
+ *              parent method exits.)
+ *
+ ******************************************************************************/
+
+void
+acpi_ds_clear_implicit_return (
+	struct acpi_walk_state          *walk_state)
+{
+	ACPI_FUNCTION_NAME ("ds_clear_implicit_return");
+
+
+	/*
+	 * Slack must be enabled for this feature
+	 */
+	if (!acpi_gbl_enable_interpreter_slack) {
+		return;
+	}
+
+	if (walk_state->implicit_return_obj) {
+		/*
+		 * Delete any "stale" implicit return. However, in
+		 * complex statements, the implicit return value can be
+		 * bubbled up several levels.
+		 */
+		ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH,
+			"Removing reference on stale implicit return obj %p\n",
+			walk_state->implicit_return_obj));
+
+		acpi_ut_remove_reference (walk_state->implicit_return_obj);
+		walk_state->implicit_return_obj = NULL;
+	}
+}
+
+
+#ifndef ACPI_NO_METHOD_EXECUTION
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_do_implicit_return
+ *
+ * PARAMETERS:  return_desc         - The return value
+ *              walk_state          - Current State
+ *              add_reference       - True if a reference should be added to the
+ *                                    return object
+ *
+ * RETURN:      TRUE if implicit return enabled, FALSE otherwise
+ *
+ * DESCRIPTION: Implements the optional "implicit return".  We save the result
+ *              of every ASL operator and control method invocation in case the
+ *              parent method exit.  Before storing a new return value, we
+ *              delete the previous return value.
+ *
+ ******************************************************************************/
+
+u8
+acpi_ds_do_implicit_return (
+	union acpi_operand_object       *return_desc,
+	struct acpi_walk_state          *walk_state,
+	u8                              add_reference)
+{
+	ACPI_FUNCTION_NAME ("ds_do_implicit_return");
+
+
+	/*
+	 * Slack must be enabled for this feature, and we must
+	 * have a valid return object
+	 */
+	if ((!acpi_gbl_enable_interpreter_slack) ||
+		(!return_desc)) {
+		return (FALSE);
+	}
+
+	ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH,
+			"Result %p will be implicitly returned; Prev=%p\n",
+			return_desc,
+			walk_state->implicit_return_obj));
+
+	/*
+	 * Delete any "stale" implicit return value first. However, in
+	 * complex statements, the implicit return value can be
+	 * bubbled up several levels, so we don't clear the value if it
+	 * is the same as the return_desc.
+	 */
+	if (walk_state->implicit_return_obj) {
+		if (walk_state->implicit_return_obj == return_desc) {
+			return (TRUE);
+		}
+		acpi_ds_clear_implicit_return (walk_state);
+	}
+
+	/* Save the implicit return value, add a reference if requested */
+
+	walk_state->implicit_return_obj = return_desc;
+	if (add_reference) {
+		acpi_ut_add_reference (return_desc);
+	}
+
+	return (TRUE);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_is_result_used
+ *
+ * PARAMETERS:  Op                  - Current Op
+ *              walk_state          - Current State
+ *
+ * RETURN:      TRUE if result is used, FALSE otherwise
+ *
+ * DESCRIPTION: Check if a result object will be used by the parent
+ *
+ ******************************************************************************/
+
+u8
+acpi_ds_is_result_used (
+	union acpi_parse_object         *op,
+	struct acpi_walk_state          *walk_state)
+{
+	const struct acpi_opcode_info   *parent_info;
+
+	ACPI_FUNCTION_TRACE_PTR ("ds_is_result_used", op);
+
+
+	/* Must have both an Op and a Result Object */
+
+	if (!op) {
+		ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "Null Op\n"));
+		return_VALUE (TRUE);
+	}
+
+	/*
+	 * We know that this operator is not a
+	 * Return() operator (would not come here.) The following code is the
+	 * optional support for a so-called "implicit return". Some AML code
+	 * assumes that the last value of the method is "implicitly" returned
+	 * to the caller. Just save the last result as the return value.
+	 * NOTE: this is optional because the ASL language does not actually
+	 * support this behavior.
+	 */
+	acpi_ds_do_implicit_return (walk_state->result_obj, walk_state, TRUE);
+
+	/*
+	 * Now determine if the parent will use the result
+	 *
+	 * If there is no parent, or the parent is a scope_op, we are executing
+	 * at the method level. An executing method typically has no parent,
+	 * since each method is parsed separately.  A method invoked externally
+	 * via execute_control_method has a scope_op as the parent.
+	 */
+	if ((!op->common.parent) ||
+		(op->common.parent->common.aml_opcode == AML_SCOPE_OP)) {
+		/* No parent, the return value cannot possibly be used */
+
+		ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH, "At Method level, result of [%s] not used\n",
+				acpi_ps_get_opcode_name (op->common.aml_opcode)));
+		return_VALUE (FALSE);
+	}
+
+	/* Get info on the parent. The root_op is AML_SCOPE */
+
+	parent_info = acpi_ps_get_opcode_info (op->common.parent->common.aml_opcode);
+	if (parent_info->class == AML_CLASS_UNKNOWN) {
+		ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "Unknown parent opcode. Op=%p\n", op));
+		return_VALUE (FALSE);
+	}
+
+	/*
+	 * Decide what to do with the result based on the parent.  If
+	 * the parent opcode will not use the result, delete the object.
+	 * Otherwise leave it as is, it will be deleted when it is used
+	 * as an operand later.
+	 */
+	switch (parent_info->class) {
+	case AML_CLASS_CONTROL:
+
+		switch (op->common.parent->common.aml_opcode) {
+		case AML_RETURN_OP:
+
+			/* Never delete the return value associated with a return opcode */
+
+			goto result_used;
+
+		case AML_IF_OP:
+		case AML_WHILE_OP:
+
+			/*
+			 * If we are executing the predicate AND this is the predicate op,
+			 * we will use the return value
+			 */
+			if ((walk_state->control_state->common.state == ACPI_CONTROL_PREDICATE_EXECUTING) &&
+				(walk_state->control_state->control.predicate_op == op)) {
+				goto result_used;
+			}
+			break;
+
+		default:
+			/* Ignore other control opcodes */
+			break;
+		}
+
+		/* The general control opcode returns no result */
+
+		goto result_not_used;
+
+
+	case AML_CLASS_CREATE:
+
+		/*
+		 * These opcodes allow term_arg(s) as operands and therefore
+		 * the operands can be method calls.  The result is used.
+		 */
+		goto result_used;
+
+
+	case AML_CLASS_NAMED_OBJECT:
+
+		if ((op->common.parent->common.aml_opcode == AML_REGION_OP)      ||
+			(op->common.parent->common.aml_opcode == AML_DATA_REGION_OP) ||
+			(op->common.parent->common.aml_opcode == AML_PACKAGE_OP)     ||
+			(op->common.parent->common.aml_opcode == AML_VAR_PACKAGE_OP) ||
+			(op->common.parent->common.aml_opcode == AML_BUFFER_OP)      ||
+			(op->common.parent->common.aml_opcode == AML_INT_EVAL_SUBTREE_OP)) {
+			/*
+			 * These opcodes allow term_arg(s) as operands and therefore
+			 * the operands can be method calls.  The result is used.
+			 */
+			goto result_used;
+		}
+
+		goto result_not_used;
+
+
+	default:
+
+		/*
+		 * In all other cases. the parent will actually use the return
+		 * object, so keep it.
+		 */
+		goto result_used;
+	}
+
+
+result_used:
+	ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH, "Result of [%s] used by Parent [%s] Op=%p\n",
+			acpi_ps_get_opcode_name (op->common.aml_opcode),
+			acpi_ps_get_opcode_name (op->common.parent->common.aml_opcode), op));
+
+	return_VALUE (TRUE);
+
+
+result_not_used:
+	ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH, "Result of [%s] not used by Parent [%s] Op=%p\n",
+			acpi_ps_get_opcode_name (op->common.aml_opcode),
+			acpi_ps_get_opcode_name (op->common.parent->common.aml_opcode), op));
+
+	return_VALUE (FALSE);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_delete_result_if_not_used
+ *
+ * PARAMETERS:  Op              - Current parse Op
+ *              result_obj      - Result of the operation
+ *              walk_state      - Current state
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Used after interpretation of an opcode.  If there is an internal
+ *              result descriptor, check if the parent opcode will actually use
+ *              this result.  If not, delete the result now so that it will
+ *              not become orphaned.
+ *
+ ******************************************************************************/
+
+void
+acpi_ds_delete_result_if_not_used (
+	union acpi_parse_object         *op,
+	union acpi_operand_object       *result_obj,
+	struct acpi_walk_state          *walk_state)
+{
+	union acpi_operand_object       *obj_desc;
+	acpi_status                     status;
+
+
+	ACPI_FUNCTION_TRACE_PTR ("ds_delete_result_if_not_used", result_obj);
+
+
+	if (!op) {
+		ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "Null Op\n"));
+		return_VOID;
+	}
+
+	if (!result_obj) {
+		return_VOID;
+	}
+
+	if (!acpi_ds_is_result_used (op, walk_state)) {
+		/* Must pop the result stack (obj_desc should be equal to result_obj) */
+
+		status = acpi_ds_result_pop (&obj_desc, walk_state);
+		if (ACPI_SUCCESS (status)) {
+			acpi_ut_remove_reference (result_obj);
+		}
+	}
+
+	return_VOID;
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_resolve_operands
+ *
+ * PARAMETERS:  walk_state          - Current walk state with operands on stack
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Resolve all operands to their values.  Used to prepare
+ *              arguments to a control method invocation (a call from one
+ *              method to another.)
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ds_resolve_operands (
+	struct acpi_walk_state          *walk_state)
+{
+	u32                             i;
+	acpi_status                     status = AE_OK;
+
+
+	ACPI_FUNCTION_TRACE_PTR ("ds_resolve_operands", walk_state);
+
+
+	/*
+	 * Attempt to resolve each of the valid operands
+	 * Method arguments are passed by reference, not by value.  This means
+	 * that the actual objects are passed, not copies of the objects.
+	 */
+	for (i = 0; i < walk_state->num_operands; i++) {
+		status = acpi_ex_resolve_to_value (&walk_state->operands[i], walk_state);
+		if (ACPI_FAILURE (status)) {
+			break;
+		}
+	}
+
+	return_ACPI_STATUS (status);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_clear_operands
+ *
+ * PARAMETERS:  walk_state          - Current walk state with operands on stack
+ *
+ * RETURN:      None
+ *
+ * DESCRIPTION: Clear all operands on the current walk state operand stack.
+ *
+ ******************************************************************************/
+
+void
+acpi_ds_clear_operands (
+	struct acpi_walk_state          *walk_state)
+{
+	u32                             i;
+
+
+	ACPI_FUNCTION_TRACE_PTR ("ds_clear_operands", walk_state);
+
+
+	/* Remove a reference on each operand on the stack */
+
+	for (i = 0; i < walk_state->num_operands; i++) {
+		/*
+		 * Remove a reference to all operands, including both
+		 * "Arguments" and "Targets".
+		 */
+		acpi_ut_remove_reference (walk_state->operands[i]);
+		walk_state->operands[i] = NULL;
+	}
+
+	walk_state->num_operands = 0;
+	return_VOID;
+}
+#endif
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_create_operand
+ *
+ * PARAMETERS:  walk_state      - Current walk state
+ *              Arg             - Parse object for the argument
+ *              arg_index       - Which argument (zero based)
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Translate a parse tree object that is an argument to an AML
+ *              opcode to the equivalent interpreter object.  This may include
+ *              looking up a name or entering a new name into the internal
+ *              namespace.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ds_create_operand (
+	struct acpi_walk_state          *walk_state,
+	union acpi_parse_object         *arg,
+	u32                             arg_index)
+{
+	acpi_status                     status = AE_OK;
+	char                            *name_string;
+	u32                             name_length;
+	union acpi_operand_object       *obj_desc;
+	union acpi_parse_object         *parent_op;
+	u16                             opcode;
+	acpi_interpreter_mode           interpreter_mode;
+	const struct acpi_opcode_info   *op_info;
+
+
+	ACPI_FUNCTION_TRACE_PTR ("ds_create_operand", arg);
+
+
+	/* A valid name must be looked up in the namespace */
+
+	if ((arg->common.aml_opcode == AML_INT_NAMEPATH_OP) &&
+		(arg->common.value.string)) {
+		ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH, "Getting a name: Arg=%p\n", arg));
+
+		/* Get the entire name string from the AML stream */
+
+		status = acpi_ex_get_name_string (ACPI_TYPE_ANY, arg->common.value.buffer,
+				  &name_string, &name_length);
+
+		if (ACPI_FAILURE (status)) {
+			return_ACPI_STATUS (status);
+		}
+
+		/* All prefixes have been handled, and the name is in name_string */
+
+		/*
+		 * Special handling for buffer_field declarations. This is a deferred
+		 * opcode that unfortunately defines the field name as the last
+		 * parameter instead of the first.  We get here when we are performing
+		 * the deferred execution, so the actual name of the field is already
+		 * in the namespace.  We don't want to attempt to look it up again
+		 * because we may be executing in a different scope than where the
+		 * actual opcode exists.
+		 */
+		if ((walk_state->deferred_node) &&
+			(walk_state->deferred_node->type == ACPI_TYPE_BUFFER_FIELD) &&
+			(arg_index != 0)) {
+			obj_desc = ACPI_CAST_PTR (union acpi_operand_object, walk_state->deferred_node);
+			status = AE_OK;
+		}
+		else    /* All other opcodes */ {
+			/*
+			 * Differentiate between a namespace "create" operation
+			 * versus a "lookup" operation (IMODE_LOAD_PASS2 vs.
+			 * IMODE_EXECUTE) in order to support the creation of
+			 * namespace objects during the execution of control methods.
+			 */
+			parent_op = arg->common.parent;
+			op_info = acpi_ps_get_opcode_info (parent_op->common.aml_opcode);
+			if ((op_info->flags & AML_NSNODE) &&
+				(parent_op->common.aml_opcode != AML_INT_METHODCALL_OP) &&
+				(parent_op->common.aml_opcode != AML_REGION_OP) &&
+				(parent_op->common.aml_opcode != AML_INT_NAMEPATH_OP)) {
+				/* Enter name into namespace if not found */
+
+				interpreter_mode = ACPI_IMODE_LOAD_PASS2;
+			}
+			else {
+				/* Return a failure if name not found */
+
+				interpreter_mode = ACPI_IMODE_EXECUTE;
+			}
+
+			status = acpi_ns_lookup (walk_state->scope_info, name_string,
+					 ACPI_TYPE_ANY, interpreter_mode,
+					 ACPI_NS_SEARCH_PARENT | ACPI_NS_DONT_OPEN_SCOPE,
+					 walk_state,
+					 ACPI_CAST_INDIRECT_PTR (struct acpi_namespace_node, &obj_desc));
+			/*
+			 * The only case where we pass through (ignore) a NOT_FOUND
+			 * error is for the cond_ref_of opcode.
+			 */
+			if (status == AE_NOT_FOUND) {
+				if (parent_op->common.aml_opcode == AML_COND_REF_OF_OP) {
+					/*
+					 * For the Conditional Reference op, it's OK if
+					 * the name is not found;  We just need a way to
+					 * indicate this to the interpreter, set the
+					 * object to the root
+					 */
+					obj_desc = ACPI_CAST_PTR (union acpi_operand_object, acpi_gbl_root_node);
+					status = AE_OK;
+				}
+				else {
+					/*
+					 * We just plain didn't find it -- which is a
+					 * very serious error at this point
+					 */
+					status = AE_AML_NAME_NOT_FOUND;
+				}
+			}
+
+			if (ACPI_FAILURE (status)) {
+				ACPI_REPORT_NSERROR (name_string, status);
+			}
+		}
+
+		/* Free the namestring created above */
+
+		ACPI_MEM_FREE (name_string);
+
+		/* Check status from the lookup */
+
+		if (ACPI_FAILURE (status)) {
+			return_ACPI_STATUS (status);
+		}
+
+		/* Put the resulting object onto the current object stack */
+
+		status = acpi_ds_obj_stack_push (obj_desc, walk_state);
+		if (ACPI_FAILURE (status)) {
+			return_ACPI_STATUS (status);
+		}
+		ACPI_DEBUGGER_EXEC (acpi_db_display_argument_object (obj_desc, walk_state));
+	}
+	else {
+		/* Check for null name case */
+
+		if (arg->common.aml_opcode == AML_INT_NAMEPATH_OP) {
+			/*
+			 * If the name is null, this means that this is an
+			 * optional result parameter that was not specified
+			 * in the original ASL.  Create a Zero Constant for a
+			 * placeholder.  (Store to a constant is a Noop.)
+			 */
+			opcode = AML_ZERO_OP;       /* Has no arguments! */
+
+			ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH, "Null namepath: Arg=%p\n", arg));
+		}
+		else {
+			opcode = arg->common.aml_opcode;
+		}
+
+		/* Get the object type of the argument */
+
+		op_info = acpi_ps_get_opcode_info (opcode);
+		if (op_info->object_type == ACPI_TYPE_INVALID) {
+			return_ACPI_STATUS (AE_NOT_IMPLEMENTED);
+		}
+
+		if (op_info->flags & AML_HAS_RETVAL) {
+			ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH,
+				"Argument previously created, already stacked \n"));
+
+			ACPI_DEBUGGER_EXEC (acpi_db_display_argument_object (
+				walk_state->operands [walk_state->num_operands - 1], walk_state));
+
+			/*
+			 * Use value that was already previously returned
+			 * by the evaluation of this argument
+			 */
+			status = acpi_ds_result_pop_from_bottom (&obj_desc, walk_state);
+			if (ACPI_FAILURE (status)) {
+				/*
+				 * Only error is underflow, and this indicates
+				 * a missing or null operand!
+				 */
+				ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "Missing or null operand, %s\n",
+					acpi_format_exception (status)));
+				return_ACPI_STATUS (status);
+			}
+		}
+		else {
+			/* Create an ACPI_INTERNAL_OBJECT for the argument */
+
+			obj_desc = acpi_ut_create_internal_object (op_info->object_type);
+			if (!obj_desc) {
+				return_ACPI_STATUS (AE_NO_MEMORY);
+			}
+
+			/* Initialize the new object */
+
+			status = acpi_ds_init_object_from_op (walk_state, arg,
+					 opcode, &obj_desc);
+			if (ACPI_FAILURE (status)) {
+				acpi_ut_delete_object_desc (obj_desc);
+				return_ACPI_STATUS (status);
+			}
+		}
+
+		/* Put the operand object on the object stack */
+
+		status = acpi_ds_obj_stack_push (obj_desc, walk_state);
+		if (ACPI_FAILURE (status)) {
+			return_ACPI_STATUS (status);
+		}
+
+		ACPI_DEBUGGER_EXEC (acpi_db_display_argument_object (obj_desc, walk_state));
+	}
+
+	return_ACPI_STATUS (AE_OK);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_create_operands
+ *
+ * PARAMETERS:  walk_state          - Current state
+ *              first_arg           - First argument of a parser argument tree
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Convert an operator's arguments from a parse tree format to
+ *              namespace objects and place those argument object on the object
+ *              stack in preparation for evaluation by the interpreter.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ds_create_operands (
+	struct acpi_walk_state          *walk_state,
+	union acpi_parse_object         *first_arg)
+{
+	acpi_status                     status = AE_OK;
+	union acpi_parse_object         *arg;
+	u32                             arg_count = 0;
+
+
+	ACPI_FUNCTION_TRACE_PTR ("ds_create_operands", first_arg);
+
+
+	/* For all arguments in the list... */
+
+	arg = first_arg;
+	while (arg) {
+		status = acpi_ds_create_operand (walk_state, arg, arg_count);
+		if (ACPI_FAILURE (status)) {
+			goto cleanup;
+		}
+
+		ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH, "Arg #%d (%p) done, Arg1=%p\n",
+			arg_count, arg, first_arg));
+
+		/* Move on to next argument, if any */
+
+		arg = arg->common.next;
+		arg_count++;
+	}
+
+	return_ACPI_STATUS (status);
+
+
+cleanup:
+	/*
+	 * We must undo everything done above; meaning that we must
+	 * pop everything off of the operand stack and delete those
+	 * objects
+	 */
+	(void) acpi_ds_obj_stack_pop_and_delete (arg_count, walk_state);
+
+	ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "While creating Arg %d - %s\n",
+		(arg_count + 1), acpi_format_exception (status)));
+	return_ACPI_STATUS (status);
+}
+
+
diff --git a/drivers/acpi/dispatcher/dswexec.c b/drivers/acpi/dispatcher/dswexec.c
new file mode 100644
index 00000000000..2071a0d2bbb
--- /dev/null
+++ b/drivers/acpi/dispatcher/dswexec.c
@@ -0,0 +1,751 @@
+/******************************************************************************
+ *
+ * Module Name: dswexec - Dispatcher method execution callbacks;
+ *                        dispatch to interpreter.
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2005, R. Byron Moore
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+
+#include <acpi/acpi.h>
+#include <acpi/acparser.h>
+#include <acpi/amlcode.h>
+#include <acpi/acdispat.h>
+#include <acpi/acinterp.h>
+#include <acpi/acnamesp.h>
+#include <acpi/acdebug.h>
+#include <acpi/acdisasm.h>
+
+
+#define _COMPONENT          ACPI_DISPATCHER
+	 ACPI_MODULE_NAME    ("dswexec")
+
+/*
+ * Dispatch table for opcode classes
+ */
+static ACPI_EXECUTE_OP      acpi_gbl_op_type_dispatch [] = {
+			  acpi_ex_opcode_0A_0T_1R,
+			  acpi_ex_opcode_1A_0T_0R,
+			  acpi_ex_opcode_1A_0T_1R,
+			  acpi_ex_opcode_1A_1T_0R,
+			  acpi_ex_opcode_1A_1T_1R,
+			  acpi_ex_opcode_2A_0T_0R,
+			  acpi_ex_opcode_2A_0T_1R,
+			  acpi_ex_opcode_2A_1T_1R,
+			  acpi_ex_opcode_2A_2T_1R,
+			  acpi_ex_opcode_3A_0T_0R,
+			  acpi_ex_opcode_3A_1T_1R,
+			  acpi_ex_opcode_6A_0T_1R};
+
+/*****************************************************************************
+ *
+ * FUNCTION:    acpi_ds_get_predicate_value
+ *
+ * PARAMETERS:  walk_state      - Current state of the parse tree walk
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Get the result of a predicate evaluation
+ *
+ ****************************************************************************/
+
+acpi_status
+acpi_ds_get_predicate_value (
+	struct acpi_walk_state          *walk_state,
+	union acpi_operand_object       *result_obj) {
+	acpi_status                     status = AE_OK;
+	union acpi_operand_object       *obj_desc;
+	union acpi_operand_object       *local_obj_desc = NULL;
+
+
+	ACPI_FUNCTION_TRACE_PTR ("ds_get_predicate_value", walk_state);
+
+
+	walk_state->control_state->common.state = 0;
+
+	if (result_obj) {
+		status = acpi_ds_result_pop (&obj_desc, walk_state);
+		if (ACPI_FAILURE (status)) {
+			ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
+				"Could not get result from predicate evaluation, %s\n",
+				acpi_format_exception (status)));
+
+			return_ACPI_STATUS (status);
+		}
+	}
+	else {
+		status = acpi_ds_create_operand (walk_state, walk_state->op, 0);
+		if (ACPI_FAILURE (status)) {
+			return_ACPI_STATUS (status);
+		}
+
+		status = acpi_ex_resolve_to_value (&walk_state->operands [0], walk_state);
+		if (ACPI_FAILURE (status)) {
+			return_ACPI_STATUS (status);
+		}
+
+		obj_desc = walk_state->operands [0];
+	}
+
+	if (!obj_desc) {
+		ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "No predicate obj_desc=%p State=%p\n",
+			obj_desc, walk_state));
+
+		return_ACPI_STATUS (AE_AML_NO_OPERAND);
+	}
+
+	/*
+	 * Result of predicate evaluation must be an Integer
+	 * object. Implicitly convert the argument if necessary.
+	 */
+	status = acpi_ex_convert_to_integer (obj_desc, &local_obj_desc, 16);
+	if (ACPI_FAILURE (status)) {
+		goto cleanup;
+	}
+
+	if (ACPI_GET_OBJECT_TYPE (local_obj_desc) != ACPI_TYPE_INTEGER) {
+		ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
+			"Bad predicate (not an integer) obj_desc=%p State=%p Type=%X\n",
+			obj_desc, walk_state, ACPI_GET_OBJECT_TYPE (obj_desc)));
+
+		status = AE_AML_OPERAND_TYPE;
+		goto cleanup;
+	}
+
+	/* Truncate the predicate to 32-bits if necessary */
+
+	acpi_ex_truncate_for32bit_table (local_obj_desc);
+
+	/*
+	 * Save the result of the predicate evaluation on
+	 * the control stack
+	 */
+	if (local_obj_desc->integer.value) {
+		walk_state->control_state->common.value = TRUE;
+	}
+	else {
+		/*
+		 * Predicate is FALSE, we will just toss the
+		 * rest of the package
+		 */
+		walk_state->control_state->common.value = FALSE;
+		status = AE_CTRL_FALSE;
+	}
+
+
+cleanup:
+
+	ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "Completed a predicate eval=%X Op=%p\n",
+		walk_state->control_state->common.value, walk_state->op));
+
+	 /* Break to debugger to display result */
+
+	ACPI_DEBUGGER_EXEC (acpi_db_display_result_object (local_obj_desc, walk_state));
+
+	/*
+	 * Delete the predicate result object (we know that
+	 * we don't need it anymore)
+	 */
+	if (local_obj_desc != obj_desc) {
+		acpi_ut_remove_reference (local_obj_desc);
+	}
+	acpi_ut_remove_reference (obj_desc);
+
+	walk_state->control_state->common.state = ACPI_CONTROL_NORMAL;
+	return_ACPI_STATUS (status);
+}
+
+
+/*****************************************************************************
+ *
+ * FUNCTION:    acpi_ds_exec_begin_op
+ *
+ * PARAMETERS:  walk_state      - Current state of the parse tree walk
+ *              out_op          - Return op if a new one is created
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Descending callback used during the execution of control
+ *              methods.  This is where most operators and operands are
+ *              dispatched to the interpreter.
+ *
+ ****************************************************************************/
+
+acpi_status
+acpi_ds_exec_begin_op (
+	struct acpi_walk_state          *walk_state,
+	union acpi_parse_object         **out_op)
+{
+	union acpi_parse_object         *op;
+	acpi_status                     status = AE_OK;
+	u32                             opcode_class;
+
+
+	ACPI_FUNCTION_TRACE_PTR ("ds_exec_begin_op", walk_state);
+
+
+	op = walk_state->op;
+	if (!op) {
+		status = acpi_ds_load2_begin_op (walk_state, out_op);
+		if (ACPI_FAILURE (status)) {
+			return_ACPI_STATUS (status);
+		}
+
+		op = *out_op;
+		walk_state->op = op;
+		walk_state->opcode = op->common.aml_opcode;
+		walk_state->op_info = acpi_ps_get_opcode_info (op->common.aml_opcode);
+
+		if (acpi_ns_opens_scope (walk_state->op_info->object_type)) {
+			ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH, "(%s) Popping scope for Op %p\n",
+				acpi_ut_get_type_name (walk_state->op_info->object_type), op));
+
+			status = acpi_ds_scope_stack_pop (walk_state);
+			if (ACPI_FAILURE (status)) {
+				return_ACPI_STATUS (status);
+			}
+		}
+	}
+
+	if (op == walk_state->origin) {
+		if (out_op) {
+			*out_op = op;
+		}
+
+		return_ACPI_STATUS (AE_OK);
+	}
+
+	/*
+	 * If the previous opcode was a conditional, this opcode
+	 * must be the beginning of the associated predicate.
+	 * Save this knowledge in the current scope descriptor
+	 */
+	if ((walk_state->control_state) &&
+		(walk_state->control_state->common.state ==
+			ACPI_CONTROL_CONDITIONAL_EXECUTING)) {
+		ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "Exec predicate Op=%p State=%p\n",
+				  op, walk_state));
+
+		walk_state->control_state->common.state = ACPI_CONTROL_PREDICATE_EXECUTING;
+
+		/* Save start of predicate */
+
+		walk_state->control_state->control.predicate_op = op;
+	}
+
+
+	opcode_class = walk_state->op_info->class;
+
+	/* We want to send namepaths to the load code */
+
+	if (op->common.aml_opcode == AML_INT_NAMEPATH_OP) {
+		opcode_class = AML_CLASS_NAMED_OBJECT;
+	}
+
+	/*
+	 * Handle the opcode based upon the opcode type
+	 */
+	switch (opcode_class) {
+	case AML_CLASS_CONTROL:
+
+		status = acpi_ds_result_stack_push (walk_state);
+		if (ACPI_FAILURE (status)) {
+			return_ACPI_STATUS (status);
+		}
+
+		status = acpi_ds_exec_begin_control_op (walk_state, op);
+		break;
+
+
+	case AML_CLASS_NAMED_OBJECT:
+
+		if (walk_state->walk_type == ACPI_WALK_METHOD) {
+			/*
+			 * Found a named object declaration during method
+			 * execution;  we must enter this object into the
+			 * namespace.  The created object is temporary and
+			 * will be deleted upon completion of the execution
+			 * of this method.
+			 */
+			status = acpi_ds_load2_begin_op (walk_state, NULL);
+		}
+
+		if (op->common.aml_opcode == AML_REGION_OP) {
+			status = acpi_ds_result_stack_push (walk_state);
+		}
+		break;
+
+
+	case AML_CLASS_EXECUTE:
+	case AML_CLASS_CREATE:
+
+		/*
+		 * Most operators with arguments.
+		 * Start a new result/operand state
+		 */
+		status = acpi_ds_result_stack_push (walk_state);
+		break;
+
+
+	default:
+		break;
+	}
+
+	/* Nothing to do here during method execution */
+
+	return_ACPI_STATUS (status);
+}
+
+
+/*****************************************************************************
+ *
+ * FUNCTION:    acpi_ds_exec_end_op
+ *
+ * PARAMETERS:  walk_state      - Current state of the parse tree walk
+ *              Op              - Op that has been just been completed in the
+ *                                walk;  Arguments have now been evaluated.
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Ascending callback used during the execution of control
+ *              methods.  The only thing we really need to do here is to
+ *              notice the beginning of IF, ELSE, and WHILE blocks.
+ *
+ ****************************************************************************/
+
+acpi_status
+acpi_ds_exec_end_op (
+	struct acpi_walk_state          *walk_state)
+{
+	union acpi_parse_object         *op;
+	acpi_status                     status = AE_OK;
+	u32                             op_type;
+	u32                             op_class;
+	union acpi_parse_object         *next_op;
+	union acpi_parse_object         *first_arg;
+
+
+	ACPI_FUNCTION_TRACE_PTR ("ds_exec_end_op", walk_state);
+
+
+	op      = walk_state->op;
+	op_type = walk_state->op_info->type;
+	op_class = walk_state->op_info->class;
+
+	if (op_class == AML_CLASS_UNKNOWN) {
+		ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "Unknown opcode %X\n", op->common.aml_opcode));
+		return_ACPI_STATUS (AE_NOT_IMPLEMENTED);
+	}
+
+	first_arg = op->common.value.arg;
+
+	/* Init the walk state */
+
+	walk_state->num_operands = 0;
+	walk_state->return_desc = NULL;
+	walk_state->result_obj = NULL;
+
+	/* Call debugger for single step support (DEBUG build only) */
+
+	ACPI_DEBUGGER_EXEC (status = acpi_db_single_step (walk_state, op, op_class));
+	ACPI_DEBUGGER_EXEC (if (ACPI_FAILURE (status)) {return_ACPI_STATUS (status);});
+
+	/* Decode the Opcode Class */
+
+	switch (op_class) {
+	case AML_CLASS_ARGUMENT:    /* constants, literals, etc. -- do nothing */
+		break;
+
+
+	case AML_CLASS_EXECUTE:     /* most operators with arguments */
+
+		/* Build resolved operand stack */
+
+		status = acpi_ds_create_operands (walk_state, first_arg);
+		if (ACPI_FAILURE (status)) {
+			goto cleanup;
+		}
+
+		/* Done with this result state (Now that operand stack is built) */
+
+		status = acpi_ds_result_stack_pop (walk_state);
+		if (ACPI_FAILURE (status)) {
+			goto cleanup;
+		}
+
+		/*
+		 * All opcodes require operand resolution, with the only exceptions
+		 * being the object_type and size_of operators.
+		 */
+		if (!(walk_state->op_info->flags & AML_NO_OPERAND_RESOLVE)) {
+			/* Resolve all operands */
+
+			status = acpi_ex_resolve_operands (walk_state->opcode,
+					  &(walk_state->operands [walk_state->num_operands -1]),
+					  walk_state);
+			if (ACPI_SUCCESS (status)) {
+				ACPI_DUMP_OPERANDS (ACPI_WALK_OPERANDS, ACPI_IMODE_EXECUTE,
+						  acpi_ps_get_opcode_name (walk_state->opcode),
+						  walk_state->num_operands, "after ex_resolve_operands");
+			}
+		}
+
+		if (ACPI_SUCCESS (status)) {
+			/*
+			 * Dispatch the request to the appropriate interpreter handler
+			 * routine.  There is one routine per opcode "type" based upon the
+			 * number of opcode arguments and return type.
+			 */
+			status = acpi_gbl_op_type_dispatch[op_type] (walk_state);
+		}
+		else {
+			/*
+			 * Treat constructs of the form "Store(local_x,local_x)" as noops when the
+			 * Local is uninitialized.
+			 */
+			if  ((status == AE_AML_UNINITIALIZED_LOCAL) &&
+				(walk_state->opcode == AML_STORE_OP) &&
+				(walk_state->operands[0]->common.type == ACPI_TYPE_LOCAL_REFERENCE) &&
+				(walk_state->operands[1]->common.type == ACPI_TYPE_LOCAL_REFERENCE) &&
+				(walk_state->operands[0]->reference.opcode ==
+				 walk_state->operands[1]->reference.opcode) &&
+				(walk_state->operands[0]->reference.offset ==
+				 walk_state->operands[1]->reference.offset)) {
+				status = AE_OK;
+			}
+			else {
+				ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
+					"[%s]: Could not resolve operands, %s\n",
+					acpi_ps_get_opcode_name (walk_state->opcode),
+					acpi_format_exception (status)));
+			}
+		}
+
+		/* Always delete the argument objects and clear the operand stack */
+
+		acpi_ds_clear_operands (walk_state);
+
+		/*
+		 * If a result object was returned from above, push it on the
+		 * current result stack
+		 */
+		if (ACPI_SUCCESS (status) &&
+			walk_state->result_obj) {
+			status = acpi_ds_result_push (walk_state->result_obj, walk_state);
+		}
+
+		break;
+
+
+	default:
+
+		switch (op_type) {
+		case AML_TYPE_CONTROL:    /* Type 1 opcode, IF/ELSE/WHILE/NOOP */
+
+			/* 1 Operand, 0 external_result, 0 internal_result */
+
+			status = acpi_ds_exec_end_control_op (walk_state, op);
+
+			/* Make sure to properly pop the result stack */
+
+			if (ACPI_SUCCESS (status)) {
+				status = acpi_ds_result_stack_pop (walk_state);
+			}
+			else if (status == AE_CTRL_PENDING) {
+				status = acpi_ds_result_stack_pop (walk_state);
+				if (ACPI_SUCCESS (status)) {
+					status = AE_CTRL_PENDING;
+				}
+			}
+			break;
+
+
+		case AML_TYPE_METHOD_CALL:
+
+			/*
+			 * If the method is referenced from within a package
+			 * declaration, it is not a invocation of the method, just
+			 * a reference to it.
+			 */
+			if ((op->asl.parent) &&
+			   ((op->asl.parent->asl.aml_opcode == AML_PACKAGE_OP) ||
+				(op->asl.parent->asl.aml_opcode == AML_VAR_PACKAGE_OP))) {
+				ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH, "Method Reference in a Package, Op=%p\n", op));
+				op->common.node = (struct acpi_namespace_node *) op->asl.value.arg->asl.node->object;
+				acpi_ut_add_reference (op->asl.value.arg->asl.node->object);
+				return_ACPI_STATUS (AE_OK);
+			}
+
+			ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH, "Method invocation, Op=%p\n", op));
+
+			/*
+			 * (AML_METHODCALL) Op->Asl.Value.Arg->Asl.Node contains
+			 * the method Node pointer
+			 */
+			/* next_op points to the op that holds the method name */
+
+			next_op = first_arg;
+
+			/* next_op points to first argument op */
+
+			next_op = next_op->common.next;
+
+			/*
+			 * Get the method's arguments and put them on the operand stack
+			 */
+			status = acpi_ds_create_operands (walk_state, next_op);
+			if (ACPI_FAILURE (status)) {
+				break;
+			}
+
+			/*
+			 * Since the operands will be passed to another control method,
+			 * we must resolve all local references here (Local variables,
+			 * arguments to *this* method, etc.)
+			 */
+			status = acpi_ds_resolve_operands (walk_state);
+			if (ACPI_FAILURE (status)) {
+				/* On error, clear all resolved operands */
+
+				acpi_ds_clear_operands (walk_state);
+				break;
+			}
+
+			/*
+			 * Tell the walk loop to preempt this running method and
+			 * execute the new method
+			 */
+			status = AE_CTRL_TRANSFER;
+
+			/*
+			 * Return now; we don't want to disturb anything,
+			 * especially the operand count!
+			 */
+			return_ACPI_STATUS (status);
+
+
+		case AML_TYPE_CREATE_FIELD:
+
+			ACPI_DEBUG_PRINT ((ACPI_DB_EXEC,
+				"Executing create_field Buffer/Index Op=%p\n", op));
+
+			status = acpi_ds_load2_end_op (walk_state);
+			if (ACPI_FAILURE (status)) {
+				break;
+			}
+
+			status = acpi_ds_eval_buffer_field_operands (walk_state, op);
+			break;
+
+
+		case AML_TYPE_CREATE_OBJECT:
+
+			ACPI_DEBUG_PRINT ((ACPI_DB_EXEC,
+				"Executing create_object (Buffer/Package) Op=%p\n", op));
+
+			switch (op->common.parent->common.aml_opcode) {
+			case AML_NAME_OP:
+
+				/*
+				 * Put the Node on the object stack (Contains the ACPI Name of
+				 * this object)
+				 */
+				walk_state->operands[0] = (void *) op->common.parent->common.node;
+				walk_state->num_operands = 1;
+
+				status = acpi_ds_create_node (walk_state, op->common.parent->common.node, op->common.parent);
+				if (ACPI_FAILURE (status)) {
+					break;
+				}
+
+				/* Fall through */
+				/*lint -fallthrough */
+
+			case AML_INT_EVAL_SUBTREE_OP:
+
+				status = acpi_ds_eval_data_object_operands (walk_state, op,
+						  acpi_ns_get_attached_object (op->common.parent->common.node));
+				break;
+
+			default:
+
+				status = acpi_ds_eval_data_object_operands (walk_state, op, NULL);
+				break;
+			}
+
+			/* Done with this result state (Now that operand stack is built) */
+
+			status = acpi_ds_result_stack_pop (walk_state);
+			if (ACPI_FAILURE (status)) {
+				goto cleanup;
+			}
+
+			/*
+			 * If a result object was returned from above, push it on the
+			 * current result stack
+			 */
+			if (ACPI_SUCCESS (status) &&
+				walk_state->result_obj) {
+				status = acpi_ds_result_push (walk_state->result_obj, walk_state);
+			}
+			break;
+
+
+		case AML_TYPE_NAMED_FIELD:
+		case AML_TYPE_NAMED_COMPLEX:
+		case AML_TYPE_NAMED_SIMPLE:
+		case AML_TYPE_NAMED_NO_OBJ:
+
+			status = acpi_ds_load2_end_op (walk_state);
+			if (ACPI_FAILURE (status)) {
+				break;
+			}
+
+			if (op->common.aml_opcode == AML_REGION_OP) {
+				ACPI_DEBUG_PRINT ((ACPI_DB_EXEC,
+					"Executing op_region Address/Length Op=%p\n", op));
+
+				status = acpi_ds_eval_region_operands (walk_state, op);
+				if (ACPI_FAILURE (status)) {
+					break;
+				}
+
+				status = acpi_ds_result_stack_pop (walk_state);
+			}
+
+			break;
+
+
+		case AML_TYPE_UNDEFINED:
+
+			ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "Undefined opcode type Op=%p\n", op));
+			return_ACPI_STATUS (AE_NOT_IMPLEMENTED);
+
+
+		case AML_TYPE_BOGUS:
+
+			ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH,
+				"Internal opcode=%X type Op=%p\n",
+				walk_state->opcode, op));
+			break;
+
+
+		default:
+
+			ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
+				"Unimplemented opcode, class=%X type=%X Opcode=%X Op=%p\n",
+				op_class, op_type, op->common.aml_opcode, op));
+
+			status = AE_NOT_IMPLEMENTED;
+			break;
+		}
+	}
+
+	/*
+	 * ACPI 2.0 support for 64-bit integers: Truncate numeric
+	 * result value if we are executing from a 32-bit ACPI table
+	 */
+	acpi_ex_truncate_for32bit_table (walk_state->result_obj);
+
+	/*
+	 * Check if we just completed the evaluation of a
+	 * conditional predicate
+	 */
+
+	if ((ACPI_SUCCESS (status)) &&
+		(walk_state->control_state) &&
+		(walk_state->control_state->common.state ==
+			ACPI_CONTROL_PREDICATE_EXECUTING) &&
+		(walk_state->control_state->control.predicate_op == op)) {
+		status = acpi_ds_get_predicate_value (walk_state, walk_state->result_obj);
+		walk_state->result_obj = NULL;
+	}
+
+
+cleanup:
+
+	/* Invoke exception handler on error */
+
+	if (ACPI_FAILURE (status) &&
+		acpi_gbl_exception_handler &&
+		!(status & AE_CODE_CONTROL)) {
+		acpi_ex_exit_interpreter ();
+		status = acpi_gbl_exception_handler (status,
+				 walk_state->method_node->name.integer, walk_state->opcode,
+				 walk_state->aml_offset, NULL);
+		acpi_ex_enter_interpreter ();
+	}
+
+	if (walk_state->result_obj) {
+		/* Break to debugger to display result */
+
+		ACPI_DEBUGGER_EXEC (acpi_db_display_result_object (walk_state->result_obj, walk_state));
+
+		/*
+		 * Delete the result op if and only if:
+		 * Parent will not use the result -- such as any
+		 * non-nested type2 op in a method (parent will be method)
+		 */
+		acpi_ds_delete_result_if_not_used (op, walk_state->result_obj, walk_state);
+	}
+
+#ifdef _UNDER_DEVELOPMENT
+
+	if (walk_state->parser_state.aml == walk_state->parser_state.aml_end) {
+		acpi_db_method_end (walk_state);
+	}
+#endif
+
+	/* Always clear the object stack */
+
+	walk_state->num_operands = 0;
+
+#ifdef ACPI_DISASSEMBLER
+
+	/* On error, display method locals/args */
+
+	if (ACPI_FAILURE (status)) {
+		acpi_dm_dump_method_info (status, walk_state, op);
+	}
+#endif
+
+	return_ACPI_STATUS (status);
+}
+
+
diff --git a/drivers/acpi/dispatcher/dswload.c b/drivers/acpi/dispatcher/dswload.c
new file mode 100644
index 00000000000..06d75867958
--- /dev/null
+++ b/drivers/acpi/dispatcher/dswload.c
@@ -0,0 +1,976 @@
+/******************************************************************************
+ *
+ * Module Name: dswload - Dispatcher namespace load callbacks
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2005, R. Byron Moore
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+
+#include <acpi/acpi.h>
+#include <acpi/acparser.h>
+#include <acpi/amlcode.h>
+#include <acpi/acdispat.h>
+#include <acpi/acinterp.h>
+#include <acpi/acnamesp.h>
+#include <acpi/acevents.h>
+
+#ifdef _ACPI_ASL_COMPILER
+#include <acpi/acdisasm.h>
+#endif
+
+#define _COMPONENT          ACPI_DISPATCHER
+	 ACPI_MODULE_NAME    ("dswload")
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_init_callbacks
+ *
+ * PARAMETERS:  walk_state      - Current state of the parse tree walk
+ *              pass_number     - 1, 2, or 3
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Init walk state callbacks
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ds_init_callbacks (
+	struct acpi_walk_state          *walk_state,
+	u32                             pass_number)
+{
+
+	switch (pass_number) {
+	case 1:
+		walk_state->parse_flags       = ACPI_PARSE_LOAD_PASS1 | ACPI_PARSE_DELETE_TREE;
+		walk_state->descending_callback = acpi_ds_load1_begin_op;
+		walk_state->ascending_callback = acpi_ds_load1_end_op;
+		break;
+
+	case 2:
+		walk_state->parse_flags       = ACPI_PARSE_LOAD_PASS1 | ACPI_PARSE_DELETE_TREE;
+		walk_state->descending_callback = acpi_ds_load2_begin_op;
+		walk_state->ascending_callback = acpi_ds_load2_end_op;
+		break;
+
+	case 3:
+#ifndef ACPI_NO_METHOD_EXECUTION
+		walk_state->parse_flags      |= ACPI_PARSE_EXECUTE  | ACPI_PARSE_DELETE_TREE;
+		walk_state->descending_callback = acpi_ds_exec_begin_op;
+		walk_state->ascending_callback = acpi_ds_exec_end_op;
+#endif
+		break;
+
+	default:
+		return (AE_BAD_PARAMETER);
+	}
+
+	return (AE_OK);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_load1_begin_op
+ *
+ * PARAMETERS:  walk_state      - Current state of the parse tree walk
+ *              Op              - Op that has been just been reached in the
+ *                                walk;  Arguments have not been evaluated yet.
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Descending callback used during the loading of ACPI tables.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ds_load1_begin_op (
+	struct acpi_walk_state          *walk_state,
+	union acpi_parse_object         **out_op)
+{
+	union acpi_parse_object         *op;
+	struct acpi_namespace_node      *node;
+	acpi_status                     status;
+	acpi_object_type                object_type;
+	char                            *path;
+	u32                             flags;
+
+
+	ACPI_FUNCTION_NAME ("ds_load1_begin_op");
+
+
+	op = walk_state->op;
+	ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH, "Op=%p State=%p\n", op, walk_state));
+
+	/* We are only interested in opcodes that have an associated name */
+
+	if (op) {
+		if (!(walk_state->op_info->flags & AML_NAMED)) {
+#if 0
+			if ((walk_state->op_info->class == AML_CLASS_EXECUTE) ||
+				(walk_state->op_info->class == AML_CLASS_CONTROL)) {
+				acpi_os_printf ("\n\n***EXECUTABLE OPCODE %s***\n\n", walk_state->op_info->name);
+				*out_op = op;
+				return (AE_CTRL_SKIP);
+			}
+#endif
+			*out_op = op;
+			return (AE_OK);
+		}
+
+		/* Check if this object has already been installed in the namespace */
+
+		if (op->common.node) {
+			*out_op = op;
+			return (AE_OK);
+		}
+	}
+
+	path = acpi_ps_get_next_namestring (&walk_state->parser_state);
+
+	/* Map the raw opcode into an internal object type */
+
+	object_type = walk_state->op_info->object_type;
+
+	ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH,
+		"State=%p Op=%p [%s]\n", walk_state, op, acpi_ut_get_type_name (object_type)));
+
+	switch (walk_state->opcode) {
+	case AML_SCOPE_OP:
+
+		/*
+		 * The target name of the Scope() operator must exist at this point so
+		 * that we can actually open the scope to enter new names underneath it.
+		 * Allow search-to-root for single namesegs.
+		 */
+		status = acpi_ns_lookup (walk_state->scope_info, path, object_type,
+				  ACPI_IMODE_EXECUTE, ACPI_NS_SEARCH_PARENT, walk_state, &(node));
+#ifdef _ACPI_ASL_COMPILER
+		if (status == AE_NOT_FOUND) {
+			/*
+			 * Table disassembly:
+			 * Target of Scope() not found.  Generate an External for it, and
+			 * insert the name into the namespace.
+			 */
+			acpi_dm_add_to_external_list (path);
+			status = acpi_ns_lookup (walk_state->scope_info, path, object_type,
+					   ACPI_IMODE_LOAD_PASS1, ACPI_NS_SEARCH_PARENT, walk_state, &(node));
+		}
+#endif
+		if (ACPI_FAILURE (status)) {
+			ACPI_REPORT_NSERROR (path, status);
+			return (status);
+		}
+
+		/*
+		 * Check to make sure that the target is
+		 * one of the opcodes that actually opens a scope
+		 */
+		switch (node->type) {
+		case ACPI_TYPE_LOCAL_SCOPE:         /* Scope  */
+		case ACPI_TYPE_DEVICE:
+		case ACPI_TYPE_POWER:
+		case ACPI_TYPE_PROCESSOR:
+		case ACPI_TYPE_THERMAL:
+
+			/* These are acceptable types */
+			break;
+
+		case ACPI_TYPE_INTEGER:
+		case ACPI_TYPE_STRING:
+		case ACPI_TYPE_BUFFER:
+
+			/*
+			 * These types we will allow, but we will change the type.  This
+			 * enables some existing code of the form:
+			 *
+			 *  Name (DEB, 0)
+			 *  Scope (DEB) { ... }
+			 *
+			 * Note: silently change the type here.  On the second pass, we will report a warning
+			 */
+
+			ACPI_DEBUG_PRINT ((ACPI_DB_INFO, "Type override - [%4.4s] had invalid type (%s) for Scope operator, changed to (Scope)\n",
+				path, acpi_ut_get_type_name (node->type)));
+
+			node->type = ACPI_TYPE_ANY;
+			walk_state->scope_info->common.value = ACPI_TYPE_ANY;
+			break;
+
+		default:
+
+			/* All other types are an error */
+
+			ACPI_REPORT_ERROR (("Invalid type (%s) for target of Scope operator [%4.4s] (Cannot override)\n",
+				acpi_ut_get_type_name (node->type), path));
+
+			return (AE_AML_OPERAND_TYPE);
+		}
+		break;
+
+
+	default:
+
+		/*
+		 * For all other named opcodes, we will enter the name into the namespace.
+		 *
+		 * Setup the search flags.
+		 * Since we are entering a name into the namespace, we do not want to
+		 * enable the search-to-root upsearch.
+		 *
+		 * There are only two conditions where it is acceptable that the name
+		 * already exists:
+		 *    1) the Scope() operator can reopen a scoping object that was
+		 *       previously defined (Scope, Method, Device, etc.)
+		 *    2) Whenever we are parsing a deferred opcode (op_region, Buffer,
+		 *       buffer_field, or Package), the name of the object is already
+		 *       in the namespace.
+		 */
+		if (walk_state->deferred_node) {
+			/* This name is already in the namespace, get the node */
+
+			node = walk_state->deferred_node;
+			status = AE_OK;
+			break;
+		}
+
+		flags = ACPI_NS_NO_UPSEARCH;
+		if ((walk_state->opcode != AML_SCOPE_OP) &&
+			(!(walk_state->parse_flags & ACPI_PARSE_DEFERRED_OP))) {
+			flags |= ACPI_NS_ERROR_IF_FOUND;
+			ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH, "[%s] Cannot already exist\n",
+					acpi_ut_get_type_name (object_type)));
+		}
+		else {
+			ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH, "[%s] Both Find or Create allowed\n",
+					acpi_ut_get_type_name (object_type)));
+		}
+
+		/*
+		 * Enter the named type into the internal namespace.  We enter the name
+		 * as we go downward in the parse tree.  Any necessary subobjects that involve
+		 * arguments to the opcode must be created as we go back up the parse tree later.
+		 */
+		status = acpi_ns_lookup (walk_state->scope_info, path, object_type,
+				  ACPI_IMODE_LOAD_PASS1, flags, walk_state, &(node));
+		if (ACPI_FAILURE (status)) {
+			ACPI_REPORT_NSERROR (path, status);
+			return (status);
+		}
+		break;
+	}
+
+
+	/* Common exit */
+
+	if (!op) {
+		/* Create a new op */
+
+		op = acpi_ps_alloc_op (walk_state->opcode);
+		if (!op) {
+			return (AE_NO_MEMORY);
+		}
+	}
+
+	/* Initialize */
+
+	op->named.name = node->name.integer;
+
+#if (defined (ACPI_NO_METHOD_EXECUTION) || defined (ACPI_CONSTANT_EVAL_ONLY))
+	op->named.path = (u8 *) path;
+#endif
+
+
+	/*
+	 * Put the Node in the "op" object that the parser uses, so we
+	 * can get it again quickly when this scope is closed
+	 */
+	op->common.node = node;
+	acpi_ps_append_arg (acpi_ps_get_parent_scope (&walk_state->parser_state), op);
+
+	*out_op = op;
+	return (status);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_load1_end_op
+ *
+ * PARAMETERS:  walk_state      - Current state of the parse tree walk
+ *              Op              - Op that has been just been completed in the
+ *                                walk;  Arguments have now been evaluated.
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Ascending callback used during the loading of the namespace,
+ *              both control methods and everything else.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ds_load1_end_op (
+	struct acpi_walk_state          *walk_state)
+{
+	union acpi_parse_object         *op;
+	acpi_object_type                object_type;
+	acpi_status                     status = AE_OK;
+
+
+	ACPI_FUNCTION_NAME ("ds_load1_end_op");
+
+
+	op = walk_state->op;
+	ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH, "Op=%p State=%p\n", op, walk_state));
+
+	/* We are only interested in opcodes that have an associated name */
+
+	if (!(walk_state->op_info->flags & (AML_NAMED | AML_FIELD))) {
+		return (AE_OK);
+	}
+
+	/* Get the object type to determine if we should pop the scope */
+
+	object_type = walk_state->op_info->object_type;
+
+#ifndef ACPI_NO_METHOD_EXECUTION
+	if (walk_state->op_info->flags & AML_FIELD) {
+		if (walk_state->opcode == AML_FIELD_OP         ||
+			walk_state->opcode == AML_BANK_FIELD_OP    ||
+			walk_state->opcode == AML_INDEX_FIELD_OP) {
+			status = acpi_ds_init_field_objects (op, walk_state);
+		}
+		return (status);
+	}
+
+
+	if (op->common.aml_opcode == AML_REGION_OP) {
+		status = acpi_ex_create_region (op->named.data, op->named.length,
+				   (acpi_adr_space_type) ((op->common.value.arg)->common.value.integer), walk_state);
+		if (ACPI_FAILURE (status)) {
+			return (status);
+		}
+	}
+#endif
+
+	if (op->common.aml_opcode == AML_NAME_OP) {
+		/* For Name opcode, get the object type from the argument */
+
+		if (op->common.value.arg) {
+			object_type = (acpi_ps_get_opcode_info ((op->common.value.arg)->common.aml_opcode))->object_type;
+			op->common.node->type = (u8) object_type;
+		}
+	}
+
+	if (op->common.aml_opcode == AML_METHOD_OP) {
+		/*
+		 * method_op pkg_length name_string method_flags term_list
+		 *
+		 * Note: We must create the method node/object pair as soon as we
+		 * see the method declaration.  This allows later pass1 parsing
+		 * of invocations of the method (need to know the number of
+		 * arguments.)
+		 */
+		ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH,
+			"LOADING-Method: State=%p Op=%p named_obj=%p\n",
+			walk_state, op, op->named.node));
+
+		if (!acpi_ns_get_attached_object (op->named.node)) {
+			walk_state->operands[0] = (void *) op->named.node;
+			walk_state->num_operands = 1;
+
+			status = acpi_ds_create_operands (walk_state, op->common.value.arg);
+			if (ACPI_SUCCESS (status)) {
+				status = acpi_ex_create_method (op->named.data,
+						   op->named.length, walk_state);
+			}
+			walk_state->operands[0] = NULL;
+			walk_state->num_operands = 0;
+
+			if (ACPI_FAILURE (status)) {
+				return (status);
+			}
+		}
+	}
+
+	/* Pop the scope stack */
+
+	if (acpi_ns_opens_scope (object_type)) {
+		ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH, "(%s): Popping scope for Op %p\n",
+			acpi_ut_get_type_name (object_type), op));
+
+		status = acpi_ds_scope_stack_pop (walk_state);
+	}
+
+	return (status);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_load2_begin_op
+ *
+ * PARAMETERS:  walk_state      - Current state of the parse tree walk
+ *              Op              - Op that has been just been reached in the
+ *                                walk;  Arguments have not been evaluated yet.
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Descending callback used during the loading of ACPI tables.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ds_load2_begin_op (
+	struct acpi_walk_state          *walk_state,
+	union acpi_parse_object         **out_op)
+{
+	union acpi_parse_object         *op;
+	struct acpi_namespace_node      *node;
+	acpi_status                     status;
+	acpi_object_type                object_type;
+	char                            *buffer_ptr;
+
+
+	ACPI_FUNCTION_TRACE ("ds_load2_begin_op");
+
+
+	op = walk_state->op;
+	ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH, "Op=%p State=%p\n", op, walk_state));
+
+	if (op) {
+		/* We only care about Namespace opcodes here */
+
+		if ((!(walk_state->op_info->flags & AML_NSOPCODE) && (walk_state->opcode != AML_INT_NAMEPATH_OP)) ||
+			(!(walk_state->op_info->flags & AML_NAMED))) {
+			return_ACPI_STATUS (AE_OK);
+		}
+
+		/*
+		 * Get the name we are going to enter or lookup in the namespace
+		 */
+		if (walk_state->opcode == AML_INT_NAMEPATH_OP) {
+			/* For Namepath op, get the path string */
+
+			buffer_ptr = op->common.value.string;
+			if (!buffer_ptr) {
+				/* No name, just exit */
+
+				return_ACPI_STATUS (AE_OK);
+			}
+		}
+		else {
+			/* Get name from the op */
+
+			buffer_ptr = (char *) &op->named.name;
+		}
+	}
+	else {
+		/* Get the namestring from the raw AML */
+
+		buffer_ptr = acpi_ps_get_next_namestring (&walk_state->parser_state);
+	}
+
+	/* Map the opcode into an internal object type */
+
+	object_type = walk_state->op_info->object_type;
+
+	ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH,
+		"State=%p Op=%p Type=%X\n", walk_state, op, object_type));
+
+
+	switch (walk_state->opcode) {
+	case AML_FIELD_OP:
+	case AML_BANK_FIELD_OP:
+	case AML_INDEX_FIELD_OP:
+
+		node = NULL;
+		status = AE_OK;
+		break;
+
+	case AML_INT_NAMEPATH_OP:
+
+		/*
+		 * The name_path is an object reference to an existing object. Don't enter the
+		 * name into the namespace, but look it up for use later
+		 */
+		status = acpi_ns_lookup (walk_state->scope_info, buffer_ptr, object_type,
+				  ACPI_IMODE_EXECUTE, ACPI_NS_SEARCH_PARENT, walk_state, &(node));
+		break;
+
+	case AML_SCOPE_OP:
+
+		/*
+		 * The Path is an object reference to an existing object.  Don't enter the
+		 * name into the namespace, but look it up for use later
+		 */
+		status = acpi_ns_lookup (walk_state->scope_info, buffer_ptr, object_type,
+				  ACPI_IMODE_EXECUTE, ACPI_NS_SEARCH_PARENT, walk_state, &(node));
+		if (ACPI_FAILURE (status)) {
+#ifdef _ACPI_ASL_COMPILER
+			if (status == AE_NOT_FOUND) {
+				status = AE_OK;
+			}
+			else {
+				ACPI_REPORT_NSERROR (buffer_ptr, status);
+			}
+#else
+			ACPI_REPORT_NSERROR (buffer_ptr, status);
+#endif
+			return_ACPI_STATUS (status);
+		}
+		/*
+		 * We must check to make sure that the target is
+		 * one of the opcodes that actually opens a scope
+		 */
+		switch (node->type) {
+		case ACPI_TYPE_LOCAL_SCOPE:         /* Scope */
+		case ACPI_TYPE_DEVICE:
+		case ACPI_TYPE_POWER:
+		case ACPI_TYPE_PROCESSOR:
+		case ACPI_TYPE_THERMAL:
+
+			/* These are acceptable types */
+			break;
+
+		case ACPI_TYPE_INTEGER:
+		case ACPI_TYPE_STRING:
+		case ACPI_TYPE_BUFFER:
+
+			/*
+			 * These types we will allow, but we will change the type.  This
+			 * enables some existing code of the form:
+			 *
+			 *  Name (DEB, 0)
+			 *  Scope (DEB) { ... }
+			 */
+
+			ACPI_REPORT_WARNING (("Type override - [%4.4s] had invalid type (%s) for Scope operator, changed to (Scope)\n",
+				buffer_ptr, acpi_ut_get_type_name (node->type)));
+
+			node->type = ACPI_TYPE_ANY;
+			walk_state->scope_info->common.value = ACPI_TYPE_ANY;
+			break;
+
+		default:
+
+			/* All other types are an error */
+
+			ACPI_REPORT_ERROR (("Invalid type (%s) for target of Scope operator [%4.4s]\n",
+				acpi_ut_get_type_name (node->type), buffer_ptr));
+
+			return (AE_AML_OPERAND_TYPE);
+		}
+		break;
+
+	default:
+
+		/* All other opcodes */
+
+		if (op && op->common.node) {
+			/* This op/node was previously entered into the namespace */
+
+			node = op->common.node;
+
+			if (acpi_ns_opens_scope (object_type)) {
+				status = acpi_ds_scope_stack_push (node, object_type, walk_state);
+				if (ACPI_FAILURE (status)) {
+					return_ACPI_STATUS (status);
+				}
+
+			}
+			return_ACPI_STATUS (AE_OK);
+		}
+
+		/*
+		 * Enter the named type into the internal namespace.  We enter the name
+		 * as we go downward in the parse tree.  Any necessary subobjects that involve
+		 * arguments to the opcode must be created as we go back up the parse tree later.
+		 *
+		 * Note: Name may already exist if we are executing a deferred opcode.
+		 */
+		if (walk_state->deferred_node) {
+			/* This name is already in the namespace, get the node */
+
+			node = walk_state->deferred_node;
+			status = AE_OK;
+			break;
+		}
+
+		status = acpi_ns_lookup (walk_state->scope_info, buffer_ptr, object_type,
+				  ACPI_IMODE_EXECUTE, ACPI_NS_NO_UPSEARCH, walk_state, &(node));
+		break;
+	}
+
+	if (ACPI_FAILURE (status)) {
+		ACPI_REPORT_NSERROR (buffer_ptr, status);
+		return_ACPI_STATUS (status);
+	}
+
+
+	if (!op) {
+		/* Create a new op */
+
+		op = acpi_ps_alloc_op (walk_state->opcode);
+		if (!op) {
+			return_ACPI_STATUS (AE_NO_MEMORY);
+		}
+
+		/* Initialize the new op */
+
+		if (node) {
+			op->named.name = node->name.integer;
+		}
+		if (out_op) {
+			*out_op = op;
+		}
+	}
+
+	/*
+	 * Put the Node in the "op" object that the parser uses, so we
+	 * can get it again quickly when this scope is closed
+	 */
+	op->common.node = node;
+
+	return_ACPI_STATUS (status);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_load2_end_op
+ *
+ * PARAMETERS:  walk_state      - Current state of the parse tree walk
+ *              Op              - Op that has been just been completed in the
+ *                                walk;  Arguments have now been evaluated.
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Ascending callback used during the loading of the namespace,
+ *              both control methods and everything else.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ds_load2_end_op (
+	struct acpi_walk_state          *walk_state)
+{
+	union acpi_parse_object         *op;
+	acpi_status                     status = AE_OK;
+	acpi_object_type                object_type;
+	struct acpi_namespace_node      *node;
+	union acpi_parse_object         *arg;
+	struct acpi_namespace_node      *new_node;
+#ifndef ACPI_NO_METHOD_EXECUTION
+	u32                             i;
+#endif
+
+
+	ACPI_FUNCTION_TRACE ("ds_load2_end_op");
+
+	op = walk_state->op;
+	ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH, "Opcode [%s] Op %p State %p\n",
+			walk_state->op_info->name, op, walk_state));
+
+	/* Only interested in opcodes that have namespace objects */
+
+	if (!(walk_state->op_info->flags & AML_NSOBJECT)) {
+		return_ACPI_STATUS (AE_OK);
+	}
+
+	if (op->common.aml_opcode == AML_SCOPE_OP) {
+		ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH,
+			"Ending scope Op=%p State=%p\n", op, walk_state));
+	}
+
+
+	object_type = walk_state->op_info->object_type;
+
+	/*
+	 * Get the Node/name from the earlier lookup
+	 * (It was saved in the *op structure)
+	 */
+	node = op->common.node;
+
+	/*
+	 * Put the Node on the object stack (Contains the ACPI Name of
+	 * this object)
+	 */
+	walk_state->operands[0] = (void *) node;
+	walk_state->num_operands = 1;
+
+	/* Pop the scope stack */
+
+	if (acpi_ns_opens_scope (object_type) && (op->common.aml_opcode != AML_INT_METHODCALL_OP)) {
+		ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH, "(%s) Popping scope for Op %p\n",
+			acpi_ut_get_type_name (object_type), op));
+
+		status = acpi_ds_scope_stack_pop (walk_state);
+		if (ACPI_FAILURE (status)) {
+			goto cleanup;
+		}
+	}
+
+	/*
+	 * Named operations are as follows:
+	 *
+	 * AML_ALIAS
+	 * AML_BANKFIELD
+	 * AML_CREATEBITFIELD
+	 * AML_CREATEBYTEFIELD
+	 * AML_CREATEDWORDFIELD
+	 * AML_CREATEFIELD
+	 * AML_CREATEQWORDFIELD
+	 * AML_CREATEWORDFIELD
+	 * AML_DATA_REGION
+	 * AML_DEVICE
+	 * AML_EVENT
+	 * AML_FIELD
+	 * AML_INDEXFIELD
+	 * AML_METHOD
+	 * AML_METHODCALL
+	 * AML_MUTEX
+	 * AML_NAME
+	 * AML_NAMEDFIELD
+	 * AML_OPREGION
+	 * AML_POWERRES
+	 * AML_PROCESSOR
+	 * AML_SCOPE
+	 * AML_THERMALZONE
+	 */
+
+	ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH,
+		"Create-Load [%s] State=%p Op=%p named_obj=%p\n",
+		acpi_ps_get_opcode_name (op->common.aml_opcode), walk_state, op, node));
+
+	/* Decode the opcode */
+
+	arg = op->common.value.arg;
+
+	switch (walk_state->op_info->type) {
+#ifndef ACPI_NO_METHOD_EXECUTION
+
+	case AML_TYPE_CREATE_FIELD:
+
+		/*
+		 * Create the field object, but the field buffer and index must
+		 * be evaluated later during the execution phase
+		 */
+		status = acpi_ds_create_buffer_field (op, walk_state);
+		break;
+
+
+	 case AML_TYPE_NAMED_FIELD:
+
+		switch (op->common.aml_opcode) {
+		case AML_INDEX_FIELD_OP:
+
+			status = acpi_ds_create_index_field (op, (acpi_handle) arg->common.node,
+					   walk_state);
+			break;
+
+		case AML_BANK_FIELD_OP:
+
+			status = acpi_ds_create_bank_field (op, arg->common.node, walk_state);
+			break;
+
+		case AML_FIELD_OP:
+
+			status = acpi_ds_create_field (op, arg->common.node, walk_state);
+			break;
+
+		default:
+			/* All NAMED_FIELD opcodes must be handled above */
+			break;
+		}
+		break;
+
+
+	 case AML_TYPE_NAMED_SIMPLE:
+
+		status = acpi_ds_create_operands (walk_state, arg);
+		if (ACPI_FAILURE (status)) {
+			goto cleanup;
+		}
+
+		switch (op->common.aml_opcode) {
+		case AML_PROCESSOR_OP:
+
+			status = acpi_ex_create_processor (walk_state);
+			break;
+
+		case AML_POWER_RES_OP:
+
+			status = acpi_ex_create_power_resource (walk_state);
+			break;
+
+		case AML_MUTEX_OP:
+
+			status = acpi_ex_create_mutex (walk_state);
+			break;
+
+		case AML_EVENT_OP:
+
+			status = acpi_ex_create_event (walk_state);
+			break;
+
+		case AML_DATA_REGION_OP:
+
+			status = acpi_ex_create_table_region (walk_state);
+			break;
+
+		case AML_ALIAS_OP:
+
+			status = acpi_ex_create_alias (walk_state);
+			break;
+
+		default:
+			/* Unknown opcode */
+
+			status = AE_OK;
+			goto cleanup;
+		}
+
+		/* Delete operands */
+
+		for (i = 1; i < walk_state->num_operands; i++) {
+			acpi_ut_remove_reference (walk_state->operands[i]);
+			walk_state->operands[i] = NULL;
+		}
+
+		break;
+#endif /* ACPI_NO_METHOD_EXECUTION */
+
+	case AML_TYPE_NAMED_COMPLEX:
+
+		switch (op->common.aml_opcode) {
+#ifndef ACPI_NO_METHOD_EXECUTION
+		case AML_REGION_OP:
+			/*
+			 * The op_region is not fully parsed at this time. Only valid argument is the space_id.
+			 * (We must save the address of the AML of the address and length operands)
+			 */
+			/*
+			 * If we have a valid region, initialize it
+			 * Namespace is NOT locked at this point.
+			 */
+			status = acpi_ev_initialize_region (acpi_ns_get_attached_object (node), FALSE);
+			if (ACPI_FAILURE (status)) {
+				/*
+				 *  If AE_NOT_EXIST is returned, it is not fatal
+				 *  because many regions get created before a handler
+				 *  is installed for said region.
+				 */
+				if (AE_NOT_EXIST == status) {
+					status = AE_OK;
+				}
+			}
+			break;
+
+
+		case AML_NAME_OP:
+
+			status = acpi_ds_create_node (walk_state, node, op);
+			break;
+#endif /* ACPI_NO_METHOD_EXECUTION */
+
+
+		default:
+			/* All NAMED_COMPLEX opcodes must be handled above */
+			/* Note: Method objects were already created in Pass 1 */
+			break;
+		}
+		break;
+
+
+	case AML_CLASS_INTERNAL:
+
+		/* case AML_INT_NAMEPATH_OP: */
+		break;
+
+
+	case AML_CLASS_METHOD_CALL:
+
+		ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH,
+			"RESOLVING-method_call: State=%p Op=%p named_obj=%p\n",
+			walk_state, op, node));
+
+		/*
+		 * Lookup the method name and save the Node
+		 */
+		status = acpi_ns_lookup (walk_state->scope_info, arg->common.value.string,
+				  ACPI_TYPE_ANY, ACPI_IMODE_LOAD_PASS2,
+				  ACPI_NS_SEARCH_PARENT | ACPI_NS_DONT_OPEN_SCOPE,
+				  walk_state, &(new_node));
+		if (ACPI_SUCCESS (status)) {
+			/*
+			 * Make sure that what we found is indeed a method
+			 * We didn't search for a method on purpose, to see if the name would resolve
+			 */
+			if (new_node->type != ACPI_TYPE_METHOD) {
+				status = AE_AML_OPERAND_TYPE;
+			}
+
+			/* We could put the returned object (Node) on the object stack for later, but
+			 * for now, we will put it in the "op" object that the parser uses, so we
+			 * can get it again at the end of this scope
+			 */
+			op->common.node = new_node;
+		}
+		else {
+			ACPI_REPORT_NSERROR (arg->common.value.string, status);
+		}
+		break;
+
+
+	default:
+		break;
+	}
+
+cleanup:
+
+	/* Remove the Node pushed at the very beginning */
+
+	walk_state->operands[0] = NULL;
+	walk_state->num_operands = 0;
+	return_ACPI_STATUS (status);
+}
+
+
diff --git a/drivers/acpi/dispatcher/dswscope.c b/drivers/acpi/dispatcher/dswscope.c
new file mode 100644
index 00000000000..65f456151e2
--- /dev/null
+++ b/drivers/acpi/dispatcher/dswscope.c
@@ -0,0 +1,229 @@
+/******************************************************************************
+ *
+ * Module Name: dswscope - Scope stack manipulation
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2005, R. Byron Moore
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+
+#include <acpi/acpi.h>
+#include <acpi/acdispat.h>
+
+
+#define _COMPONENT          ACPI_DISPATCHER
+	 ACPI_MODULE_NAME    ("dswscope")
+
+
+#define STACK_POP(head) head
+
+
+/****************************************************************************
+ *
+ * FUNCTION:    acpi_ds_scope_stack_clear
+ *
+ * PARAMETERS:  None
+ *
+ * DESCRIPTION: Pop (and free) everything on the scope stack except the
+ *              root scope object (which remains at the stack top.)
+ *
+ ***************************************************************************/
+
+void
+acpi_ds_scope_stack_clear (
+	struct acpi_walk_state          *walk_state)
+{
+	union acpi_generic_state        *scope_info;
+
+	ACPI_FUNCTION_NAME ("ds_scope_stack_clear");
+
+
+	while (walk_state->scope_info) {
+		/* Pop a scope off the stack */
+
+		scope_info = walk_state->scope_info;
+		walk_state->scope_info = scope_info->scope.next;
+
+		ACPI_DEBUG_PRINT ((ACPI_DB_EXEC,
+			"Popped object type (%s)\n", acpi_ut_get_type_name (scope_info->common.value)));
+		acpi_ut_delete_generic_state (scope_info);
+	}
+}
+
+
+/****************************************************************************
+ *
+ * FUNCTION:    acpi_ds_scope_stack_push
+ *
+ * PARAMETERS:  *Node,              - Name to be made current
+ *              Type,               - Type of frame being pushed
+ *
+ * DESCRIPTION: Push the current scope on the scope stack, and make the
+ *              passed Node current.
+ *
+ ***************************************************************************/
+
+acpi_status
+acpi_ds_scope_stack_push (
+	struct acpi_namespace_node      *node,
+	acpi_object_type                type,
+	struct acpi_walk_state          *walk_state)
+{
+	union acpi_generic_state        *scope_info;
+	union acpi_generic_state        *old_scope_info;
+
+
+	ACPI_FUNCTION_TRACE ("ds_scope_stack_push");
+
+
+	if (!node) {
+		/* Invalid scope   */
+
+		ACPI_REPORT_ERROR (("ds_scope_stack_push: null scope passed\n"));
+		return_ACPI_STATUS (AE_BAD_PARAMETER);
+	}
+
+	/* Make sure object type is valid */
+
+	if (!acpi_ut_valid_object_type (type)) {
+		ACPI_REPORT_WARNING (("ds_scope_stack_push: Invalid object type: 0x%X\n", type));
+	}
+
+	/* Allocate a new scope object */
+
+	scope_info = acpi_ut_create_generic_state ();
+	if (!scope_info) {
+		return_ACPI_STATUS (AE_NO_MEMORY);
+	}
+
+	/* Init new scope object */
+
+	scope_info->common.data_type = ACPI_DESC_TYPE_STATE_WSCOPE;
+	scope_info->scope.node      = node;
+	scope_info->common.value    = (u16) type;
+
+	walk_state->scope_depth++;
+
+	ACPI_DEBUG_PRINT ((ACPI_DB_EXEC,
+		"[%.2d] Pushed scope ", (u32) walk_state->scope_depth));
+
+	old_scope_info = walk_state->scope_info;
+	if (old_scope_info) {
+		ACPI_DEBUG_PRINT_RAW ((ACPI_DB_EXEC,
+			"[%4.4s] (%s)",
+			acpi_ut_get_node_name (old_scope_info->scope.node),
+			acpi_ut_get_type_name (old_scope_info->common.value)));
+	}
+	else {
+		ACPI_DEBUG_PRINT_RAW ((ACPI_DB_EXEC,
+			"[\\___] (%s)", "ROOT"));
+	}
+
+	ACPI_DEBUG_PRINT_RAW ((ACPI_DB_EXEC,
+		", New scope -> [%4.4s] (%s)\n",
+		acpi_ut_get_node_name (scope_info->scope.node),
+		acpi_ut_get_type_name (scope_info->common.value)));
+
+	/* Push new scope object onto stack */
+
+	acpi_ut_push_generic_state (&walk_state->scope_info, scope_info);
+	return_ACPI_STATUS (AE_OK);
+}
+
+
+/****************************************************************************
+ *
+ * FUNCTION:    acpi_ds_scope_stack_pop
+ *
+ * PARAMETERS:  Type                - The type of frame to be found
+ *
+ * DESCRIPTION: Pop the scope stack until a frame of the requested type
+ *              is found.
+ *
+ * RETURN:      Count of frames popped.  If no frame of the requested type
+ *              was found, the count is returned as a negative number and
+ *              the scope stack is emptied (which sets the current scope
+ *              to the root).  If the scope stack was empty at entry, the
+ *              function is a no-op and returns 0.
+ *
+ ***************************************************************************/
+
+acpi_status
+acpi_ds_scope_stack_pop (
+	struct acpi_walk_state          *walk_state)
+{
+	union acpi_generic_state        *scope_info;
+	union acpi_generic_state        *new_scope_info;
+
+
+	ACPI_FUNCTION_TRACE ("ds_scope_stack_pop");
+
+
+	/*
+	 * Pop scope info object off the stack.
+	 */
+	scope_info = acpi_ut_pop_generic_state (&walk_state->scope_info);
+	if (!scope_info) {
+		return_ACPI_STATUS (AE_STACK_UNDERFLOW);
+	}
+
+	walk_state->scope_depth--;
+
+	ACPI_DEBUG_PRINT ((ACPI_DB_EXEC,
+		"[%.2d] Popped scope [%4.4s] (%s), New scope -> ",
+		(u32) walk_state->scope_depth,
+		acpi_ut_get_node_name (scope_info->scope.node),
+		acpi_ut_get_type_name (scope_info->common.value)));
+
+	new_scope_info = walk_state->scope_info;
+	if (new_scope_info) {
+		ACPI_DEBUG_PRINT_RAW ((ACPI_DB_EXEC,
+			"[%4.4s] (%s)\n",
+			acpi_ut_get_node_name (new_scope_info->scope.node),
+			acpi_ut_get_type_name (new_scope_info->common.value)));
+	}
+	else {
+		ACPI_DEBUG_PRINT_RAW ((ACPI_DB_EXEC,
+			"[\\___] (ROOT)\n"));
+	}
+
+	acpi_ut_delete_generic_state (scope_info);
+	return_ACPI_STATUS (AE_OK);
+}
+
+
diff --git a/drivers/acpi/dispatcher/dswstate.c b/drivers/acpi/dispatcher/dswstate.c
new file mode 100644
index 00000000000..e555b3fbd5e
--- /dev/null
+++ b/drivers/acpi/dispatcher/dswstate.c
@@ -0,0 +1,1100 @@
+/******************************************************************************
+ *
+ * Module Name: dswstate - Dispatcher parse tree walk management routines
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2005, R. Byron Moore
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+
+#include <acpi/acpi.h>
+#include <acpi/acparser.h>
+#include <acpi/acdispat.h>
+#include <acpi/acnamesp.h>
+
+#define _COMPONENT          ACPI_DISPATCHER
+	 ACPI_MODULE_NAME    ("dswstate")
+
+
+#ifdef ACPI_FUTURE_USAGE
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_result_insert
+ *
+ * PARAMETERS:  Object              - Object to push
+ *              Index               - Where to insert the object
+ *              walk_state          - Current Walk state
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Insert an object onto this walk's result stack
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ds_result_insert (
+	void                            *object,
+	u32                             index,
+	struct acpi_walk_state          *walk_state)
+{
+	union acpi_generic_state        *state;
+
+
+	ACPI_FUNCTION_NAME ("ds_result_insert");
+
+
+	state = walk_state->results;
+	if (!state) {
+		ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "No result object pushed! State=%p\n",
+			walk_state));
+		return (AE_NOT_EXIST);
+	}
+
+	if (index >= ACPI_OBJ_NUM_OPERANDS) {
+		ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
+			"Index out of range: %X Obj=%p State=%p Num=%X\n",
+			index, object, walk_state, state->results.num_results));
+		return (AE_BAD_PARAMETER);
+	}
+
+	if (!object) {
+		ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
+			"Null Object! Index=%X Obj=%p State=%p Num=%X\n",
+			index, object, walk_state, state->results.num_results));
+		return (AE_BAD_PARAMETER);
+	}
+
+	state->results.obj_desc [index] = object;
+	state->results.num_results++;
+
+	ACPI_DEBUG_PRINT ((ACPI_DB_EXEC,
+		"Obj=%p [%s] State=%p Num=%X Cur=%X\n",
+		object, object ? acpi_ut_get_object_type_name ((union acpi_operand_object *) object) : "NULL",
+		walk_state, state->results.num_results, walk_state->current_result));
+
+	return (AE_OK);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_result_remove
+ *
+ * PARAMETERS:  Object              - Where to return the popped object
+ *              Index               - Where to extract the object
+ *              walk_state          - Current Walk state
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Pop an object off the bottom of this walk's result stack.  In
+ *              other words, this is a FIFO.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ds_result_remove (
+	union acpi_operand_object       **object,
+	u32                             index,
+	struct acpi_walk_state          *walk_state)
+{
+	union acpi_generic_state        *state;
+
+
+	ACPI_FUNCTION_NAME ("ds_result_remove");
+
+
+	state = walk_state->results;
+	if (!state) {
+		ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "No result object pushed! State=%p\n",
+			walk_state));
+		return (AE_NOT_EXIST);
+	}
+
+	if (index >= ACPI_OBJ_MAX_OPERAND) {
+		ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
+			"Index out of range: %X State=%p Num=%X\n",
+			index, walk_state, state->results.num_results));
+	}
+
+	/* Check for a valid result object */
+
+	if (!state->results.obj_desc [index]) {
+		ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
+			"Null operand! State=%p #Ops=%X, Index=%X\n",
+			walk_state, state->results.num_results, index));
+		return (AE_AML_NO_RETURN_VALUE);
+	}
+
+	/* Remove the object */
+
+	state->results.num_results--;
+
+	*object = state->results.obj_desc [index];
+	state->results.obj_desc [index] = NULL;
+
+	ACPI_DEBUG_PRINT ((ACPI_DB_EXEC,
+		"Obj=%p [%s] Index=%X State=%p Num=%X\n",
+		*object, (*object) ? acpi_ut_get_object_type_name (*object) : "NULL",
+		index, walk_state, state->results.num_results));
+
+	return (AE_OK);
+}
+
+#endif  /*  ACPI_FUTURE_USAGE  */
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_result_pop
+ *
+ * PARAMETERS:  Object              - Where to return the popped object
+ *              walk_state          - Current Walk state
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Pop an object off the bottom of this walk's result stack.  In
+ *              other words, this is a FIFO.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ds_result_pop (
+	union acpi_operand_object       **object,
+	struct acpi_walk_state          *walk_state)
+{
+	acpi_native_uint                index;
+	union acpi_generic_state        *state;
+
+
+	ACPI_FUNCTION_NAME ("ds_result_pop");
+
+
+	state = walk_state->results;
+	if (!state) {
+		return (AE_OK);
+	}
+
+	if (!state->results.num_results) {
+		ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "Result stack is empty! State=%p\n",
+			walk_state));
+		return (AE_AML_NO_RETURN_VALUE);
+	}
+
+	/* Remove top element */
+
+	state->results.num_results--;
+
+	for (index = ACPI_OBJ_NUM_OPERANDS; index; index--) {
+		/* Check for a valid result object */
+
+		if (state->results.obj_desc [index -1]) {
+			*object = state->results.obj_desc [index -1];
+			state->results.obj_desc [index -1] = NULL;
+
+			ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "Obj=%p [%s] Index=%X State=%p Num=%X\n",
+				*object, (*object) ? acpi_ut_get_object_type_name (*object) : "NULL",
+				(u32) index -1, walk_state, state->results.num_results));
+
+			return (AE_OK);
+		}
+	}
+
+	ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "No result objects! State=%p\n", walk_state));
+	return (AE_AML_NO_RETURN_VALUE);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_result_pop_from_bottom
+ *
+ * PARAMETERS:  Object              - Where to return the popped object
+ *              walk_state          - Current Walk state
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Pop an object off the bottom of this walk's result stack.  In
+ *              other words, this is a FIFO.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ds_result_pop_from_bottom (
+	union acpi_operand_object       **object,
+	struct acpi_walk_state          *walk_state)
+{
+	acpi_native_uint                index;
+	union acpi_generic_state        *state;
+
+
+	ACPI_FUNCTION_NAME ("ds_result_pop_from_bottom");
+
+
+	state = walk_state->results;
+	if (!state) {
+		ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
+			"Warning: No result object pushed! State=%p\n", walk_state));
+		return (AE_NOT_EXIST);
+	}
+
+	if (!state->results.num_results) {
+		ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "No result objects! State=%p\n", walk_state));
+		return (AE_AML_NO_RETURN_VALUE);
+	}
+
+	/* Remove Bottom element */
+
+	*object = state->results.obj_desc [0];
+
+	/* Push entire stack down one element */
+
+	for (index = 0; index < state->results.num_results; index++) {
+		state->results.obj_desc [index] = state->results.obj_desc [index + 1];
+	}
+
+	state->results.num_results--;
+
+	/* Check for a valid result object */
+
+	if (!*object) {
+		ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "Null operand! State=%p #Ops=%X, Index=%X\n",
+			walk_state, state->results.num_results, (u32) index));
+		return (AE_AML_NO_RETURN_VALUE);
+	}
+
+	ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "Obj=%p [%s], Results=%p State=%p\n",
+		*object, (*object) ? acpi_ut_get_object_type_name (*object) : "NULL",
+		state, walk_state));
+
+	return (AE_OK);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_result_push
+ *
+ * PARAMETERS:  Object              - Where to return the popped object
+ *              walk_state          - Current Walk state
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Push an object onto the current result stack
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ds_result_push (
+	union acpi_operand_object       *object,
+	struct acpi_walk_state          *walk_state)
+{
+	union acpi_generic_state        *state;
+
+
+	ACPI_FUNCTION_NAME ("ds_result_push");
+
+
+	state = walk_state->results;
+	if (!state) {
+		ACPI_REPORT_ERROR (("No result stack frame during push\n"));
+		return (AE_AML_INTERNAL);
+	}
+
+	if (state->results.num_results == ACPI_OBJ_NUM_OPERANDS) {
+		ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
+			"Result stack overflow: Obj=%p State=%p Num=%X\n",
+			object, walk_state, state->results.num_results));
+		return (AE_STACK_OVERFLOW);
+	}
+
+	if (!object) {
+		ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "Null Object! Obj=%p State=%p Num=%X\n",
+			object, walk_state, state->results.num_results));
+		return (AE_BAD_PARAMETER);
+	}
+
+	state->results.obj_desc [state->results.num_results] = object;
+	state->results.num_results++;
+
+	ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "Obj=%p [%s] State=%p Num=%X Cur=%X\n",
+		object, object ? acpi_ut_get_object_type_name ((union acpi_operand_object *) object) : "NULL",
+		walk_state, state->results.num_results, walk_state->current_result));
+
+	return (AE_OK);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_result_stack_push
+ *
+ * PARAMETERS:  walk_state          - Current Walk state
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Push an object onto the walk_state result stack.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ds_result_stack_push (
+	struct acpi_walk_state          *walk_state)
+{
+	union acpi_generic_state        *state;
+
+	ACPI_FUNCTION_NAME ("ds_result_stack_push");
+
+
+	state = acpi_ut_create_generic_state ();
+	if (!state) {
+		return (AE_NO_MEMORY);
+	}
+
+	state->common.data_type = ACPI_DESC_TYPE_STATE_RESULT;
+	acpi_ut_push_generic_state (&walk_state->results, state);
+
+	ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "Results=%p State=%p\n",
+		state, walk_state));
+
+	return (AE_OK);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_result_stack_pop
+ *
+ * PARAMETERS:  walk_state          - Current Walk state
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Pop an object off of the walk_state result stack.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ds_result_stack_pop (
+	struct acpi_walk_state          *walk_state)
+{
+	union acpi_generic_state        *state;
+
+	ACPI_FUNCTION_NAME ("ds_result_stack_pop");
+
+
+	/* Check for stack underflow */
+
+	if (walk_state->results == NULL) {
+		ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "Underflow - State=%p\n",
+			walk_state));
+		return (AE_AML_NO_OPERAND);
+	}
+
+	state = acpi_ut_pop_generic_state (&walk_state->results);
+
+	ACPI_DEBUG_PRINT ((ACPI_DB_EXEC,
+		"Result=%p remaining_results=%X State=%p\n",
+		state, state->results.num_results, walk_state));
+
+	acpi_ut_delete_generic_state (state);
+
+	return (AE_OK);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_obj_stack_delete_all
+ *
+ * PARAMETERS:  walk_state          - Current Walk state
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Clear the object stack by deleting all objects that are on it.
+ *              Should be used with great care, if at all!
+ *
+ ******************************************************************************/
+#ifdef ACPI_FUTURE_USAGE
+acpi_status
+acpi_ds_obj_stack_delete_all (
+	struct acpi_walk_state          *walk_state)
+{
+	u32                             i;
+
+
+	ACPI_FUNCTION_TRACE_PTR ("ds_obj_stack_delete_all", walk_state);
+
+
+	/* The stack size is configurable, but fixed */
+
+	for (i = 0; i < ACPI_OBJ_NUM_OPERANDS; i++) {
+		if (walk_state->operands[i]) {
+			acpi_ut_remove_reference (walk_state->operands[i]);
+			walk_state->operands[i] = NULL;
+		}
+	}
+
+	return_ACPI_STATUS (AE_OK);
+}
+#endif  /*  ACPI_FUTURE_USAGE  */
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_obj_stack_push
+ *
+ * PARAMETERS:  Object              - Object to push
+ *              walk_state          - Current Walk state
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Push an object onto this walk's object/operand stack
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ds_obj_stack_push (
+	void                            *object,
+	struct acpi_walk_state          *walk_state)
+{
+	ACPI_FUNCTION_NAME ("ds_obj_stack_push");
+
+
+	/* Check for stack overflow */
+
+	if (walk_state->num_operands >= ACPI_OBJ_NUM_OPERANDS) {
+		ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
+			"overflow! Obj=%p State=%p #Ops=%X\n",
+			object, walk_state, walk_state->num_operands));
+		return (AE_STACK_OVERFLOW);
+	}
+
+	/* Put the object onto the stack */
+
+	walk_state->operands [walk_state->num_operands] = object;
+	walk_state->num_operands++;
+
+	ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "Obj=%p [%s] State=%p #Ops=%X\n",
+			  object, acpi_ut_get_object_type_name ((union acpi_operand_object *) object),
+			  walk_state, walk_state->num_operands));
+
+	return (AE_OK);
+}
+
+
+#if 0
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_obj_stack_pop_object
+ *
+ * PARAMETERS:  pop_count           - Number of objects/entries to pop
+ *              walk_state          - Current Walk state
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Pop this walk's object stack.  Objects on the stack are NOT
+ *              deleted by this routine.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ds_obj_stack_pop_object (
+	union acpi_operand_object       **object,
+	struct acpi_walk_state          *walk_state)
+{
+	ACPI_FUNCTION_NAME ("ds_obj_stack_pop_object");
+
+
+	/* Check for stack underflow */
+
+	if (walk_state->num_operands == 0) {
+		ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
+			"Missing operand/stack empty! State=%p #Ops=%X\n",
+			walk_state, walk_state->num_operands));
+		*object = NULL;
+		return (AE_AML_NO_OPERAND);
+	}
+
+	/* Pop the stack */
+
+	walk_state->num_operands--;
+
+	/* Check for a valid operand */
+
+	if (!walk_state->operands [walk_state->num_operands]) {
+		ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
+			"Null operand! State=%p #Ops=%X\n",
+			walk_state, walk_state->num_operands));
+		*object = NULL;
+		return (AE_AML_NO_OPERAND);
+	}
+
+	/* Get operand and set stack entry to null */
+
+	*object = walk_state->operands [walk_state->num_operands];
+	walk_state->operands [walk_state->num_operands] = NULL;
+
+	ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "Obj=%p [%s] State=%p #Ops=%X\n",
+			  *object, acpi_ut_get_object_type_name (*object),
+			  walk_state, walk_state->num_operands));
+
+	return (AE_OK);
+}
+#endif
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_obj_stack_pop
+ *
+ * PARAMETERS:  pop_count           - Number of objects/entries to pop
+ *              walk_state          - Current Walk state
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Pop this walk's object stack.  Objects on the stack are NOT
+ *              deleted by this routine.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ds_obj_stack_pop (
+	u32                             pop_count,
+	struct acpi_walk_state          *walk_state)
+{
+	u32                             i;
+
+	ACPI_FUNCTION_NAME ("ds_obj_stack_pop");
+
+
+	for (i = 0; i < pop_count; i++) {
+		/* Check for stack underflow */
+
+		if (walk_state->num_operands == 0) {
+			ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
+				"Underflow! Count=%X State=%p #Ops=%X\n",
+				pop_count, walk_state, walk_state->num_operands));
+			return (AE_STACK_UNDERFLOW);
+		}
+
+		/* Just set the stack entry to null */
+
+		walk_state->num_operands--;
+		walk_state->operands [walk_state->num_operands] = NULL;
+	}
+
+	ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "Count=%X State=%p #Ops=%X\n",
+			  pop_count, walk_state, walk_state->num_operands));
+
+	return (AE_OK);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_obj_stack_pop_and_delete
+ *
+ * PARAMETERS:  pop_count           - Number of objects/entries to pop
+ *              walk_state          - Current Walk state
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Pop this walk's object stack and delete each object that is
+ *              popped off.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ds_obj_stack_pop_and_delete (
+	u32                             pop_count,
+	struct acpi_walk_state          *walk_state)
+{
+	u32                             i;
+	union acpi_operand_object       *obj_desc;
+
+
+	ACPI_FUNCTION_NAME ("ds_obj_stack_pop_and_delete");
+
+
+	for (i = 0; i < pop_count; i++) {
+		/* Check for stack underflow */
+
+		if (walk_state->num_operands == 0) {
+			ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
+				"Underflow! Count=%X State=%p #Ops=%X\n",
+				pop_count, walk_state, walk_state->num_operands));
+			return (AE_STACK_UNDERFLOW);
+		}
+
+		/* Pop the stack and delete an object if present in this stack entry */
+
+		walk_state->num_operands--;
+		obj_desc = walk_state->operands [walk_state->num_operands];
+		if (obj_desc) {
+			acpi_ut_remove_reference (walk_state->operands [walk_state->num_operands]);
+			walk_state->operands [walk_state->num_operands] = NULL;
+		}
+	}
+
+	ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "Count=%X State=%p #Ops=%X\n",
+			  pop_count, walk_state, walk_state->num_operands));
+
+	return (AE_OK);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_obj_stack_get_value
+ *
+ * PARAMETERS:  Index               - Stack index whose value is desired.  Based
+ *                                    on the top of the stack (index=0 == top)
+ *              walk_state          - Current Walk state
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Retrieve an object from this walk's object stack.  Index must
+ *              be within the range of the current stack pointer.
+ *
+ ******************************************************************************/
+#ifdef ACPI_FUTURE_USAGE
+void *
+acpi_ds_obj_stack_get_value (
+	u32                             index,
+	struct acpi_walk_state          *walk_state)
+{
+
+	ACPI_FUNCTION_TRACE_PTR ("ds_obj_stack_get_value", walk_state);
+
+
+	/* Can't do it if the stack is empty */
+
+	if (walk_state->num_operands == 0) {
+		return_PTR (NULL);
+	}
+
+	/* or if the index is past the top of the stack */
+
+	if (index > (walk_state->num_operands - (u32) 1)) {
+		return_PTR (NULL);
+	}
+
+	return_PTR (walk_state->operands[(acpi_native_uint)(walk_state->num_operands - 1) -
+			  index]);
+}
+#endif  /*  ACPI_FUTURE_USAGE  */
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_get_current_walk_state
+ *
+ * PARAMETERS:  Thread          - Get current active state for this Thread
+ *
+ * RETURN:      Pointer to the current walk state
+ *
+ * DESCRIPTION: Get the walk state that is at the head of the list (the "current"
+ *              walk state.)
+ *
+ ******************************************************************************/
+
+struct acpi_walk_state *
+acpi_ds_get_current_walk_state (
+	struct acpi_thread_state        *thread)
+
+{
+	ACPI_FUNCTION_NAME ("ds_get_current_walk_state");
+
+
+	if (!thread) {
+		return (NULL);
+	}
+
+	ACPI_DEBUG_PRINT ((ACPI_DB_PARSE, "Current walk_state %p\n",
+		thread->walk_state_list));
+
+	return (thread->walk_state_list);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_push_walk_state
+ *
+ * PARAMETERS:  walk_state      - State to push
+ *              walk_list       - The list that owns the walk stack
+ *
+ * RETURN:      None
+ *
+ * DESCRIPTION: Place the walk_state at the head of the state list.
+ *
+ ******************************************************************************/
+
+void
+acpi_ds_push_walk_state (
+	struct acpi_walk_state          *walk_state,
+	struct acpi_thread_state        *thread)
+{
+	ACPI_FUNCTION_TRACE ("ds_push_walk_state");
+
+
+	walk_state->next      = thread->walk_state_list;
+	thread->walk_state_list = walk_state;
+
+	return_VOID;
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_pop_walk_state
+ *
+ * PARAMETERS:  walk_list       - The list that owns the walk stack
+ *
+ * RETURN:      A walk_state object popped from the stack
+ *
+ * DESCRIPTION: Remove and return the walkstate object that is at the head of
+ *              the walk stack for the given walk list.  NULL indicates that
+ *              the list is empty.
+ *
+ ******************************************************************************/
+
+struct acpi_walk_state *
+acpi_ds_pop_walk_state (
+	struct acpi_thread_state        *thread)
+{
+	struct acpi_walk_state          *walk_state;
+
+
+	ACPI_FUNCTION_TRACE ("ds_pop_walk_state");
+
+
+	walk_state = thread->walk_state_list;
+
+	if (walk_state) {
+		/* Next walk state becomes the current walk state */
+
+		thread->walk_state_list = walk_state->next;
+
+		/*
+		 * Don't clear the NEXT field, this serves as an indicator
+		 * that there is a parent WALK STATE
+		 *     NO: walk_state->Next = NULL;
+		 */
+	}
+
+	return_PTR (walk_state);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_create_walk_state
+ *
+ * PARAMETERS:  Origin          - Starting point for this walk
+ *              Thread          - Current thread state
+ *
+ * RETURN:      Pointer to the new walk state.
+ *
+ * DESCRIPTION: Allocate and initialize a new walk state.  The current walk
+ *              state is set to this new state.
+ *
+ ******************************************************************************/
+
+struct acpi_walk_state *
+acpi_ds_create_walk_state (
+	acpi_owner_id                   owner_id,
+	union acpi_parse_object         *origin,
+	union acpi_operand_object       *mth_desc,
+	struct acpi_thread_state        *thread)
+{
+	struct acpi_walk_state          *walk_state;
+	acpi_status                     status;
+
+
+	ACPI_FUNCTION_TRACE ("ds_create_walk_state");
+
+
+	walk_state = acpi_ut_acquire_from_cache (ACPI_MEM_LIST_WALK);
+	if (!walk_state) {
+		return_PTR (NULL);
+	}
+
+	walk_state->data_type       = ACPI_DESC_TYPE_WALK;
+	walk_state->owner_id        = owner_id;
+	walk_state->origin          = origin;
+	walk_state->method_desc     = mth_desc;
+	walk_state->thread          = thread;
+
+	walk_state->parser_state.start_op = origin;
+
+	/* Init the method args/local */
+
+#if (!defined (ACPI_NO_METHOD_EXECUTION) && !defined (ACPI_CONSTANT_EVAL_ONLY))
+	acpi_ds_method_data_init (walk_state);
+#endif
+
+	/* Create an initial result stack entry */
+
+	status = acpi_ds_result_stack_push (walk_state);
+	if (ACPI_FAILURE (status)) {
+		acpi_ut_release_to_cache (ACPI_MEM_LIST_WALK, walk_state);
+		return_PTR (NULL);
+	}
+
+	/* Put the new state at the head of the walk list */
+
+	if (thread) {
+		acpi_ds_push_walk_state (walk_state, thread);
+	}
+
+	return_PTR (walk_state);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_init_aml_walk
+ *
+ * PARAMETERS:  walk_state      - New state to be initialized
+ *              Op              - Current parse op
+ *              method_node     - Control method NS node, if any
+ *              aml_start       - Start of AML
+ *              aml_length      - Length of AML
+ *              Params          - Method args, if any
+ *              return_obj_desc - Where to store a return object, if any
+ *              pass_number     - 1, 2, or 3
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Initialize a walk state for a pass 1 or 2 parse tree walk
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ds_init_aml_walk (
+	struct acpi_walk_state          *walk_state,
+	union acpi_parse_object         *op,
+	struct acpi_namespace_node      *method_node,
+	u8                              *aml_start,
+	u32                             aml_length,
+	struct acpi_parameter_info      *info,
+	u32                             pass_number)
+{
+	acpi_status                     status;
+	struct acpi_parse_state         *parser_state = &walk_state->parser_state;
+	union acpi_parse_object         *extra_op;
+
+
+	ACPI_FUNCTION_TRACE ("ds_init_aml_walk");
+
+
+	walk_state->parser_state.aml    =
+	walk_state->parser_state.aml_start = aml_start;
+	walk_state->parser_state.aml_end =
+	walk_state->parser_state.pkg_end = aml_start + aml_length;
+
+	/* The next_op of the next_walk will be the beginning of the method */
+
+	walk_state->next_op             = NULL;
+
+	if (info) {
+		if (info->parameter_type == ACPI_PARAM_GPE) {
+			walk_state->gpe_event_info = ACPI_CAST_PTR (struct acpi_gpe_event_info,
+					   info->parameters);
+		}
+		else {
+			walk_state->params              = info->parameters;
+			walk_state->caller_return_desc  = &info->return_object;
+		}
+	}
+
+	status = acpi_ps_init_scope (&walk_state->parser_state, op);
+	if (ACPI_FAILURE (status)) {
+		return_ACPI_STATUS (status);
+	}
+
+	if (method_node) {
+		walk_state->parser_state.start_node = method_node;
+		walk_state->walk_type            = ACPI_WALK_METHOD;
+		walk_state->method_node          = method_node;
+		walk_state->method_desc          = acpi_ns_get_attached_object (method_node);
+
+		/* Push start scope on scope stack and make it current  */
+
+		status = acpi_ds_scope_stack_push (method_node, ACPI_TYPE_METHOD, walk_state);
+		if (ACPI_FAILURE (status)) {
+			return_ACPI_STATUS (status);
+		}
+
+		/* Init the method arguments */
+
+		status = acpi_ds_method_data_init_args (walk_state->params, ACPI_METHOD_NUM_ARGS, walk_state);
+		if (ACPI_FAILURE (status)) {
+			return_ACPI_STATUS (status);
+		}
+	}
+	else {
+		/*
+		 * Setup the current scope.
+		 * Find a Named Op that has a namespace node associated with it.
+		 * search upwards from this Op.  Current scope is the first
+		 * Op with a namespace node.
+		 */
+		extra_op = parser_state->start_op;
+		while (extra_op && !extra_op->common.node) {
+			extra_op = extra_op->common.parent;
+		}
+
+		if (!extra_op) {
+			parser_state->start_node = NULL;
+		}
+		else {
+			parser_state->start_node = extra_op->common.node;
+		}
+
+		if (parser_state->start_node) {
+			/* Push start scope on scope stack and make it current  */
+
+			status = acpi_ds_scope_stack_push (parser_state->start_node,
+					  parser_state->start_node->type, walk_state);
+			if (ACPI_FAILURE (status)) {
+				return_ACPI_STATUS (status);
+			}
+		}
+	}
+
+	status = acpi_ds_init_callbacks (walk_state, pass_number);
+	return_ACPI_STATUS (status);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_delete_walk_state
+ *
+ * PARAMETERS:  walk_state      - State to delete
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Delete a walk state including all internal data structures
+ *
+ ******************************************************************************/
+
+void
+acpi_ds_delete_walk_state (
+	struct acpi_walk_state          *walk_state)
+{
+	union acpi_generic_state        *state;
+
+
+	ACPI_FUNCTION_TRACE_PTR ("ds_delete_walk_state", walk_state);
+
+
+	if (!walk_state) {
+		return;
+	}
+
+	if (walk_state->data_type != ACPI_DESC_TYPE_WALK) {
+		ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "%p is not a valid walk state\n", walk_state));
+		return;
+	}
+
+	if (walk_state->parser_state.scope) {
+		ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "%p walk still has a scope list\n", walk_state));
+	}
+
+	/* Always must free any linked control states */
+
+	while (walk_state->control_state) {
+		state = walk_state->control_state;
+		walk_state->control_state = state->common.next;
+
+		acpi_ut_delete_generic_state (state);
+	}
+
+	/* Always must free any linked parse states */
+
+	while (walk_state->scope_info) {
+		state = walk_state->scope_info;
+		walk_state->scope_info = state->common.next;
+
+		acpi_ut_delete_generic_state (state);
+	}
+
+	/* Always must free any stacked result states */
+
+	while (walk_state->results) {
+		state = walk_state->results;
+		walk_state->results = state->common.next;
+
+		acpi_ut_delete_generic_state (state);
+	}
+
+	acpi_ut_release_to_cache (ACPI_MEM_LIST_WALK, walk_state);
+	return_VOID;
+}
+
+
+#ifdef ACPI_ENABLE_OBJECT_CACHE
+/******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_delete_walk_state_cache
+ *
+ * PARAMETERS:  None
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Purge the global state object cache.  Used during subsystem
+ *              termination.
+ *
+ ******************************************************************************/
+
+void
+acpi_ds_delete_walk_state_cache (
+	void)
+{
+	ACPI_FUNCTION_TRACE ("ds_delete_walk_state_cache");
+
+
+	acpi_ut_delete_generic_cache (ACPI_MEM_LIST_WALK);
+	return_VOID;
+}
+#endif
+
+