diff options
| author | Bjorn Helgaas <bjorn.helgaas@hp.com> | 2005-06-07 13:22:18 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-06-07 13:39:26 -0700 |
| commit | 93cffffa19960464a52f9c78d9a6150270d23785 (patch) | |
| tree | 67341f2e824b1812fde8c68bcd1bf42f3672e612 | |
| parent | a86d1f4301fad4ff44c1f614c897000bc574ab2f (diff) | |
| download | kernel_samsung_smdk4412-93cffffa19960464a52f9c78d9a6150270d23785.tar.gz kernel_samsung_smdk4412-93cffffa19960464a52f9c78d9a6150270d23785.tar.bz2 kernel_samsung_smdk4412-93cffffa19960464a52f9c78d9a6150270d23785.zip | |
[PATCH] PCI: do VIA IRQ fixup always, not just in PIC mode
At least some VIA chipsets require the fixup even in IO-APIC mode.
This was found and debugged with the patient assistance of Stian
Jordet <liste@jordet.nu> on an Asus CUV266-DLS motherboard.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
| -rw-r--r-- | drivers/pci/quirks.c | 35 |
1 files changed, 13 insertions, 22 deletions
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 637e9493034..2194669300b 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -460,17 +460,6 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_APIC, /* - * Via 686A/B: The PCI_INTERRUPT_LINE register for the on-chip - * devices, USB0/1, AC97, MC97, and ACPI, has an unusual feature: - * when written, it makes an internal connection to the PIC. - * For these devices, this register is defined to be 4 bits wide. - * Normally this is fine. However for IO-APIC motherboards, or - * non-x86 architectures (yes Via exists on PPC among other places), - * we must mask the PCI_INTERRUPT_LINE value versus 0xf to get - * interrupts delivered properly. - */ - -/* * FIXME: it is questionable that quirk_via_acpi * is needed. It shows up as an ISA bridge, and does not * support the PCI_INTERRUPT_LINE register at all. Therefore @@ -492,28 +481,30 @@ static void __devinit quirk_via_acpi(struct pci_dev *d) DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3, quirk_via_acpi ); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4, quirk_via_acpi ); -static void quirk_via_irqpic(struct pci_dev *dev) +/* + * Via 686A/B: The PCI_INTERRUPT_LINE register for the on-chip + * devices, USB0/1, AC97, MC97, and ACPI, has an unusual feature: + * when written, it makes an internal connection to the PIC. + * For these devices, this register is defined to be 4 bits wide. + * Normally this is fine. However for IO-APIC motherboards, or + * non-x86 architectures (yes Via exists on PPC among other places), + * we must mask the PCI_INTERRUPT_LINE value versus 0xf to get + * interrupts delivered properly. + */ +static void quirk_via_irq(struct pci_dev *dev) { u8 irq, new_irq; -#ifdef CONFIG_X86_IO_APIC - if (nr_ioapics && !skip_ioapic_setup) - return; -#endif -#ifdef CONFIG_ACPI - if (acpi_irq_model != ACPI_IRQ_MODEL_PIC) - return; -#endif new_irq = dev->irq & 0xf; pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq); if (new_irq != irq) { - printk(KERN_INFO "PCI: Via PIC IRQ fixup for %s, from %d to %d\n", + printk(KERN_INFO "PCI: Via IRQ fixup for %s, from %d to %d\n", pci_name(dev), irq, new_irq); udelay(15); /* unknown if delay really needed */ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, new_irq); } } -DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_via_irqpic); +DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_via_irq); /* * PIIX3 USB: We have to disable USB interrupts that are |