diff options
Diffstat (limited to 'firmware/Makefile')
| -rw-r--r-- | firmware/Makefile | 258 |
1 files changed, 0 insertions, 258 deletions
diff --git a/firmware/Makefile b/firmware/Makefile deleted file mode 100644 index 1eebc0b672e..00000000000 --- a/firmware/Makefile +++ /dev/null @@ -1,258 +0,0 @@ -# -# kbuild file for firmware/ -# - -# Create $(fwabs) from $(CONFIG_EXTRA_FIRMWARE_DIR) -- if it doesn't have a -# leading /, it's relative to $(srctree). -fwdir := $(subst ",,$(CONFIG_EXTRA_FIRMWARE_DIR)) -fwabs := $(addprefix $(srctree)/,$(filter-out /%,$(fwdir)))$(filter /%,$(fwdir)) - -fw-external-y := $(subst ",,$(CONFIG_EXTRA_FIRMWARE)) - -# There are three cases to care about: -# 1. Building kernel with CONFIG_FIRMWARE_IN_KERNEL=y -- $(fw-shipped-y) should -# include the firmware files to include, according to .config -# 2. 'make modules_install', which will install firmware for modules, and -# _also_ for the in-kernel drivers when CONFIG_FIRMWARE_IN_KERNEL=n -# 3. 'make firmware_install', which installs all firmware, unconditionally. - -# For the former two cases we want $(fw-shipped-y) and $(fw-shipped-m) to be -# accurate. In the latter case it doesn't matter -- it'll use $(fw-shipped-all). -# But be aware that the config file might not be included at all. - -ifdef CONFIG_ACENIC_OMIT_TIGON_I -acenic-objs := acenic/tg2.bin -fw-shipped- += acenic/tg1.bin -else -acenic-objs := acenic/tg1.bin acenic/tg2.bin -endif -fw-shipped-$(CONFIG_VIDEO_MFC50) += samsung_mfc_fw.bin -fw-shipped-$(CONFIG_3C359) += 3com/3C359.bin -fw-shipped-$(CONFIG_ACENIC) += $(acenic-objs) -fw-shipped-$(CONFIG_ADAPTEC_STARFIRE) += adaptec/starfire_rx.bin \ - adaptec/starfire_tx.bin -fw-shipped-$(CONFIG_ATARI_DSP56K) += dsp56k/bootstrap.bin -fw-shipped-$(CONFIG_ATM_AMBASSADOR) += atmsar11.fw -fw-shipped-$(CONFIG_BNX2X) += bnx2x/bnx2x-e1-6.2.9.0.fw \ - bnx2x/bnx2x-e1h-6.2.9.0.fw \ - bnx2x/bnx2x-e2-6.2.9.0.fw -fw-shipped-$(CONFIG_BNX2) += bnx2/bnx2-mips-09-6.2.1a.fw \ - bnx2/bnx2-rv2p-09-6.0.17.fw \ - bnx2/bnx2-rv2p-09ax-6.0.17.fw \ - bnx2/bnx2-mips-06-6.2.1.fw \ - bnx2/bnx2-rv2p-06-6.0.15.fw -fw-shipped-$(CONFIG_CASSINI) += sun/cassini.bin -fw-shipped-$(CONFIG_COMPUTONE) += intelliport2.bin -fw-shipped-$(CONFIG_CHELSIO_T3) += cxgb3/t3b_psram-1.1.0.bin \ - cxgb3/t3c_psram-1.1.0.bin \ - cxgb3/t3fw-7.10.0.bin \ - cxgb3/ael2005_opt_edc.bin \ - cxgb3/ael2005_twx_edc.bin \ - cxgb3/ael2020_twx_edc.bin -fw-shipped-$(CONFIG_DRM_MGA) += matrox/g200_warp.fw matrox/g400_warp.fw -fw-shipped-$(CONFIG_DRM_R128) += r128/r128_cce.bin -fw-shipped-$(CONFIG_DRM_RADEON) += radeon/R100_cp.bin radeon/R200_cp.bin \ - radeon/R300_cp.bin radeon/R420_cp.bin \ - radeon/RS690_cp.bin radeon/RS600_cp.bin \ - radeon/R520_cp.bin \ - radeon/R600_pfp.bin radeon/R600_me.bin \ - radeon/RV610_pfp.bin radeon/RV610_me.bin \ - radeon/RV630_pfp.bin radeon/RV630_me.bin \ - radeon/RV620_pfp.bin radeon/RV620_me.bin \ - radeon/RV635_pfp.bin radeon/RV635_me.bin \ - radeon/RV670_pfp.bin radeon/RV670_me.bin \ - radeon/RS780_pfp.bin radeon/RS780_me.bin \ - radeon/RV770_pfp.bin radeon/RV770_me.bin \ - radeon/RV730_pfp.bin radeon/RV730_me.bin \ - radeon/RV710_pfp.bin radeon/RV710_me.bin -fw-shipped-$(CONFIG_DVB_AV7110) += av7110/bootcode.bin -fw-shipped-$(CONFIG_DVB_TTUSB_BUDGET) += ttusb-budget/dspbootcode.bin -fw-shipped-$(CONFIG_E100) += e100/d101m_ucode.bin e100/d101s_ucode.bin \ - e100/d102e_ucode.bin -fw-shipped-$(CONFIG_MYRI_SBUS) += myricom/lanai.bin -fw-shipped-$(CONFIG_PCMCIA_PCNET) += cis/LA-PCM.cis cis/PCMLM28.cis \ - cis/DP83903.cis cis/NE2K.cis \ - cis/tamarack.cis cis/PE-200.cis \ - cis/PE520.cis -fw-shipped-$(CONFIG_PCMCIA_3C589) += cis/3CXEM556.cis -fw-shipped-$(CONFIG_PCMCIA_3C574) += cis/3CCFEM556.cis -fw-shipped-$(CONFIG_SERIAL_8250_CS) += cis/MT5634ZLX.cis cis/RS-COM-2P.cis \ - cis/COMpad2.cis cis/COMpad4.cis \ - cis/SW_555_SER.cis cis/SW_7xx_SER.cis \ - cis/SW_8xx_SER.cis -fw-shipped-$(CONFIG_PCMCIA_SMC91C92) += ositech/Xilinx7OD.bin -fw-shipped-$(CONFIG_SCSI_ADVANSYS) += advansys/mcode.bin advansys/38C1600.bin \ - advansys/3550.bin advansys/38C0800.bin -fw-shipped-$(CONFIG_SCSI_ISCI) += isci/isci_firmware.bin -fw-shipped-$(CONFIG_SCSI_QLOGIC_1280) += qlogic/1040.bin qlogic/1280.bin \ - qlogic/12160.bin -fw-shipped-$(CONFIG_SCSI_QLOGICPTI) += qlogic/isp1000.bin -fw-shipped-$(CONFIG_INFINIBAND_QIB) += qlogic/sd7220.fw -fw-shipped-$(CONFIG_SMCTR) += tr_smctr.bin -fw-shipped-$(CONFIG_SND_KORG1212) += korg/k1212.dsp -fw-shipped-$(CONFIG_SND_MAESTRO3) += ess/maestro3_assp_kernel.fw \ - ess/maestro3_assp_minisrc.fw -fw-shipped-$(CONFIG_SND_SB16_CSP) += sb16/mulaw_main.csp sb16/alaw_main.csp \ - sb16/ima_adpcm_init.csp \ - sb16/ima_adpcm_playback.csp \ - sb16/ima_adpcm_capture.csp -fw-shipped-$(CONFIG_SND_YMFPCI) += yamaha/ds1_ctrl.fw yamaha/ds1_dsp.fw \ - yamaha/ds1e_ctrl.fw -fw-shipped-$(CONFIG_SND_WAVEFRONT) += yamaha/yss225_registers.bin -fw-shipped-$(CONFIG_TEHUTI) += tehuti/bdx.bin -fw-shipped-$(CONFIG_TIGON3) += tigon/tg3.bin tigon/tg3_tso.bin \ - tigon/tg3_tso5.bin -fw-shipped-$(CONFIG_TYPHOON) += 3com/typhoon.bin -fw-shipped-$(CONFIG_USB_DABUSB) += dabusb/firmware.fw dabusb/bitstream.bin -fw-shipped-$(CONFIG_USB_EMI26) += emi26/loader.fw emi26/firmware.fw \ - emi26/bitstream.fw -fw-shipped-$(CONFIG_USB_EMI62) += emi62/loader.fw emi62/bitstream.fw \ - emi62/spdif.fw emi62/midi.fw -fw-shipped-$(CONFIG_USB_KAWETH) += kaweth/new_code.bin kaweth/trigger_code.bin \ - kaweth/new_code_fix.bin \ - kaweth/trigger_code_fix.bin -ifdef CONFIG_FIRMWARE_IN_KERNEL -fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_MPR) += keyspan/mpr.fw -fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA18X) += keyspan/usa18x.fw -fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA19) += keyspan/usa19.fw -fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA19QI) += keyspan/usa19qi.fw -fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA19QW) += keyspan/usa19qw.fw -fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA19W) += keyspan/usa19w.fw -fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA28) += keyspan/usa28.fw -fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA28XA) += keyspan/usa28xa.fw -fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA28XB) += keyspan/usa28xb.fw -fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA28X) += keyspan/usa28x.fw -fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA49W) += keyspan/usa49w.fw -fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA49WLC) += keyspan/usa49wlc.fw -else -fw-shipped- += keyspan/mpr.fw keyspan/usa18x.fw keyspan/usa19.fw \ - keyspan/usa19qi.fw keyspan/usa19qw.fw keyspan/usa19w.fw \ - keyspan/usa28.fw keyspan/usa28xa.fw keyspan/usa28xb.fw \ - keyspan/usa28x.fw keyspan/usa49w.fw keyspan/usa49wlc.fw -endif -fw-shipped-$(CONFIG_USB_SERIAL_TI) += ti_3410.fw ti_5052.fw \ - mts_cdma.fw mts_gsm.fw mts_edge.fw -fw-shipped-$(CONFIG_USB_SERIAL_EDGEPORT) += edgeport/boot.fw edgeport/boot2.fw \ - edgeport/down.fw edgeport/down2.fw -fw-shipped-$(CONFIG_USB_SERIAL_EDGEPORT_TI) += edgeport/down3.bin -fw-shipped-$(CONFIG_USB_SERIAL_WHITEHEAT) += whiteheat_loader.fw whiteheat.fw \ - # whiteheat_loader_debug.fw -fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_PDA) += keyspan_pda/keyspan_pda.fw -fw-shipped-$(CONFIG_USB_SERIAL_XIRCOM) += keyspan_pda/xircom_pgs.fw -fw-shipped-$(CONFIG_USB_VICAM) += vicam/firmware.fw -fw-shipped-$(CONFIG_VIDEO_CPIA2) += cpia2/stv0672_vp4.bin -fw-shipped-$(CONFIG_YAM) += yam/1200.bin yam/9600.bin - -fw-shipped-all := $(fw-shipped-y) $(fw-shipped-m) $(fw-shipped-) - -# Directories which we _might_ need to create, so we have a rule for them. -firmware-dirs := $(sort $(addprefix $(objtree)/$(obj)/,$(dir $(fw-external-y) $(fw-shipped-all)))) - -quiet_cmd_mkdir = MKDIR $(patsubst $(objtree)/%,%,$@) - cmd_mkdir = mkdir -p $@ - -quiet_cmd_ihex = IHEX $@ - cmd_ihex = $(OBJCOPY) -Iihex -Obinary $< $@ - -quiet_cmd_ihex2fw = IHEX2FW $@ - cmd_ihex2fw = $(objtree)/$(obj)/ihex2fw $< $@ - -quiet_cmd_h16tofw = H16TOFW $@ - cmd_h16tofw = $(objtree)/$(obj)/ihex2fw -w $< $@ - -quiet_cmd_fwbin = MK_FW $@ - cmd_fwbin = FWNAME="$(patsubst firmware/%.gen.S,%,$@)"; \ - FWSTR="$(subst /,_,$(subst .,_,$(subst -,_,$(patsubst \ - firmware/%.gen.S,%,$@))))"; \ - ASM_WORD=$(if $(CONFIG_64BIT),.quad,.long); \ - ASM_ALIGN=$(if $(CONFIG_64BIT),3,2); \ - PROGBITS=$(if $(CONFIG_ARM),%,@)progbits; \ - echo "/* Generated by firmware/Makefile */" > $@;\ - echo " .section .rodata" >>$@;\ - echo " .p2align $${ASM_ALIGN}" >>$@;\ - echo "_fw_$${FWSTR}_bin:" >>$@;\ - echo " .incbin \"$(2)\"" >>$@;\ - echo "_fw_end:" >>$@;\ - echo " .section .rodata.str,\"aMS\",$${PROGBITS},1" >>$@;\ - echo " .p2align $${ASM_ALIGN}" >>$@;\ - echo "_fw_$${FWSTR}_name:" >>$@;\ - echo " .string \"$$FWNAME\"" >>$@;\ - echo " .section .builtin_fw,\"a\",$${PROGBITS}" >>$@;\ - echo " .p2align $${ASM_ALIGN}" >>$@;\ - echo " $${ASM_WORD} _fw_$${FWSTR}_name" >>$@;\ - echo " $${ASM_WORD} _fw_$${FWSTR}_bin" >>$@;\ - echo " $${ASM_WORD} _fw_end - _fw_$${FWSTR}_bin" >>$@; - -# One of these files will change, or come into existence, whenever -# the configuration changes between 32-bit and 64-bit. The .S files -# need to change when that happens. -wordsize_deps := $(wildcard include/config/64bit.h include/config/32bit.h \ - include/config/ppc32.h include/config/ppc64.h \ - include/config/superh32.h include/config/superh64.h \ - include/config/x86_32.h include/config/x86_64.h) - -# Workaround for make < 3.81, where .SECONDEXPANSION doesn't work. -# It'll end up depending on these targets, so make them a PHONY rule which -# depends on _all_ the directories in $(firmware-dirs), and it'll work out OK. -PHONY += $(objtree)/$$(%) $(objtree)/$(obj)/$$(%) -$(objtree)/$$(%) $(objtree)/$(obj)/$$(%): $(firmware-dirs) - @true - -# For the $$(dir %) trick, where we need % to be expanded first. -.SECONDEXPANSION: - -$(patsubst %,$(obj)/%.gen.S, $(fw-shipped-y)): %: $(wordsize_deps) \ - | $(objtree)/$$(dir %) - $(call cmd,fwbin,$(patsubst %.gen.S,%,$@)) -$(patsubst %,$(obj)/%.gen.S, $(fw-external-y)): %: $(wordsize_deps) \ - include/config/extra/firmware/dir.h | $(objtree)/$$(dir %) - $(call cmd,fwbin,$(fwabs)/$(patsubst $(obj)/%.gen.S,%,$@)) - -# The .o files depend on the binaries directly; the .S files don't. -$(patsubst %,$(obj)/%.gen.o, $(fw-shipped-y)): %.gen.o: % -$(patsubst %,$(obj)/%.gen.o, $(fw-external-y)): $(obj)/%.gen.o: $(fwdir)/% - -# .ihex is used just as a simple way to hold binary files in a source tree -# where binaries are frowned upon. They are directly converted with objcopy. -$(obj)/%: $(obj)/%.ihex | $(objtree)/$(obj)/$$(dir %) - $(call cmd,ihex) - -# Don't depend on ihex2fw if we're installing and it already exists. -# Putting it after | in the dependencies doesn't seem sufficient when -# we're installing after a cross-compile, because ihex2fw has dependencies -# on stuff like /usr/lib/gcc/ppc64-redhat-linux/4.3.0/include/stddef.h and -# thus wants to be rebuilt. Which it can't be, if the prebuilt kernel tree -# is exported read-only for someone to run 'make install'. -ifeq ($(INSTALL):$(wildcard $(obj)/ihex2fw),install:$(obj)/ihex2fw) -ihex2fw_dep := -else -ihex2fw_dep := $(obj)/ihex2fw -endif - -# .HEX is also Intel HEX, but where the offset and length in each record -# is actually meaningful, because the firmware has to be loaded in a certain -# order rather than as a single binary blob. Thus, we convert them into our -# more compact binary representation of ihex records (<linux/ihex.h>) -$(obj)/%.fw: $(obj)/%.HEX $(ihex2fw_dep) | $(objtree)/$(obj)/$$(dir %) - $(call cmd,ihex2fw) - -# .H16 is our own modified form of Intel HEX, with 16-bit length for records. -$(obj)/%.fw: $(obj)/%.H16 $(ihex2fw_dep) | $(objtree)/$(obj)/$$(dir %) - $(call cmd,h16tofw) - -$(firmware-dirs): - $(call cmd,mkdir) - -obj-y += $(patsubst %,%.gen.o, $(fw-external-y)) -obj-$(CONFIG_FIRMWARE_IN_KERNEL) += $(patsubst %,%.gen.o, $(fw-shipped-y)) - -# Remove .S files and binaries created from ihex -# (during 'make clean' .config isn't included so they're all in $(fw-shipped-)) -targets := $(fw-shipped-) $(patsubst $(obj)/%,%, \ - $(shell find $(obj) -name \*.gen.S 2>/dev/null)) - -# Without this, built-in.o won't be created when it's empty, and the -# final vmlinux link will fail. -obj-n := dummy - -hostprogs-y := ihex2fw |