i9305 : second cleanup

Change-Id: If165d1a1a65bccf2f2303fdf44cee47c682c5a4e

19 files changed, 5397 insertions, 281 deletions

diff --git a/BoardConfig.mk b/BoardConfig.mk
index 660414c..f5f2f2d 100644
--- a/BoardConfig.mk
+++ b/BoardConfig.mk
@@ -14,11 +14,13 @@
 # limitations under the License.
 #
 
--include device/samsung/smdk4412-qcom-common/BoardCommonConfig.mk
 -include device/samsung/smdk4412-common/BoardCommonConfig.mk
+-include device/samsung/smdk4412-qcom-common/BoardCommonConfig.mk
 
 LOCAL_PATH := device/samsung/i9305
 
+TARGET_SPECIFIC_HEADER_PATH += $(LOCAL_PATH)/include
+
 # Bluetooth
 BOARD_BLUETOOTH_BDROID_BUILDCFG_INCLUDE_DIR := $(LOCAL_PATH)/bluetooth
 
diff --git a/cm.mk b/cm.mk
index 8ce223f..02230f6 100644
--- a/cm.mk
+++ b/cm.mk
@@ -1,6 +1,3 @@
-# Specify phone tech before including full_phone
-$(call inherit-product, vendor/cm/config/gsm.mk)
-
 # Release name
 PRODUCT_RELEASE_NAME := i9305
 
diff --git a/include/telephony/ril.h b/include/telephony/ril.h
new file mode 100644
index 0000000..e13ad9f
--- /dev/null
+++ b/include/telephony/ril.h
@@ -0,0 +1,5394 @@
+/*
+ * Copyright (C) 2006 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef ANDROID_RIL_H
+#define ANDROID_RIL_H 1
+
+#include <stdlib.h>
+#include <stdint.h>
+#include <telephony/ril_cdma_sms.h>
+#include <telephony/ril_nv_items.h>
+#include <telephony/ril_msim.h>
+
+#ifndef FEATURE_UNIT_TEST
+#include <sys/time.h>
+#endif /* !FEATURE_UNIT_TEST */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+
+#if defined(ANDROID_SIM_COUNT_2)
+#define SIM_COUNT 2
+#elif defined(ANDROID_SIM_COUNT_3)
+#define SIM_COUNT 3
+#elif defined(ANDROID_SIM_COUNT_4)
+#define SIM_COUNT 4
+#else
+#define SIM_COUNT 1
+#endif
+
+#ifndef ANDROID_MULTI_SIM
+#define SIM_COUNT 1
+#endif
+
+#define RIL_VERSION 11     /* Current version */
+#define RIL_VERSION_MIN 6 /* Minimum RIL_VERSION supported */
+
+#define CDMA_ALPHA_INFO_BUFFER_LENGTH 64
+#define CDMA_NUMBER_INFO_BUFFER_LENGTH 81
+
+#define MAX_RILDS 3
+#define MAX_SOCKET_NAME_LENGTH 6
+#define MAX_CLIENT_ID_LENGTH 2
+#define MAX_DEBUG_SOCKET_NAME_LENGTH 12
+#define MAX_QEMU_PIPE_NAME_LENGTH  11
+#define MAX_UUID_LENGTH 64
+
+
+typedef void * RIL_Token;
+
+typedef enum {
+    RIL_SOCKET_1,
+#if (SIM_COUNT >= 2)
+    RIL_SOCKET_2,
+#if (SIM_COUNT >= 3)
+    RIL_SOCKET_3,
+#endif
+#if (SIM_COUNT >= 4)
+    RIL_SOCKET_4,
+#endif
+#endif
+    RIL_SOCKET_NUM
+} RIL_SOCKET_ID;
+
+
+typedef enum {
+    RIL_E_SUCCESS = 0,
+    RIL_E_RADIO_NOT_AVAILABLE = 1,     /* If radio did not start or is resetting */
+    RIL_E_GENERIC_FAILURE = 2,
+    RIL_E_PASSWORD_INCORRECT = 3,      /* for PIN/PIN2 methods only! */
+    RIL_E_SIM_PIN2 = 4,                /* Operation requires SIM PIN2 to be entered */
+    RIL_E_SIM_PUK2 = 5,                /* Operation requires SIM PIN2 to be entered */
+    RIL_E_REQUEST_NOT_SUPPORTED = 6,
+    RIL_E_CANCELLED = 7,
+    RIL_E_OP_NOT_ALLOWED_DURING_VOICE_CALL = 8, /* data ops are not allowed during voice
+                                                   call on a Class C GPRS device */
+    RIL_E_OP_NOT_ALLOWED_BEFORE_REG_TO_NW = 9,  /* data ops are not allowed before device
+                                                   registers in network */
+    RIL_E_SMS_SEND_FAIL_RETRY = 10,             /* fail to send sms and need retry */
+    RIL_E_SIM_ABSENT = 11,                      /* fail to set the location where CDMA subscription
+                                                   shall be retrieved because of SIM or RUIM
+                                                   card absent */
+    RIL_E_SUBSCRIPTION_NOT_AVAILABLE = 12,      /* fail to find CDMA subscription from specified
+                                                   location */
+    RIL_E_MODE_NOT_SUPPORTED = 13,              /* HW does not support preferred network type */
+    RIL_E_FDN_CHECK_FAILURE = 14,               /* command failed because recipient is not on FDN list */
+    RIL_E_ILLEGAL_SIM_OR_ME = 15,               /* network selection failed due to
+                                                   illegal SIM or ME */
+    RIL_E_MISSING_RESOURCE = 16,                /* no logical channel available */
+    RIL_E_NO_SUCH_ELEMENT = 17,                  /* application not found on SIM */
+    RIL_E_DIAL_MODIFIED_TO_USSD = 18,           /* DIAL request modified to USSD */
+    RIL_E_DIAL_MODIFIED_TO_SS = 19,             /* DIAL request modified to SS */
+    RIL_E_DIAL_MODIFIED_TO_DIAL = 20,           /* DIAL request modified to DIAL with different
+                                                   data */
+    RIL_E_USSD_MODIFIED_TO_DIAL = 21,           /* USSD request modified to DIAL */
+    RIL_E_USSD_MODIFIED_TO_SS = 22,             /* USSD request modified to SS */
+    RIL_E_USSD_MODIFIED_TO_USSD = 23,           /* USSD request modified to different USSD
+                                                   request */
+    RIL_E_SS_MODIFIED_TO_DIAL = 24,             /* SS request modified to DIAL */
+    RIL_E_SS_MODIFIED_TO_USSD = 25,             /* SS request modified to USSD */
+    RIL_E_SUBSCRIPTION_NOT_SUPPORTED = 26,      /* Subscription not supported by RIL */
+    RIL_E_SS_MODIFIED_TO_SS = 27                /* SS request modified to different SS request */
+
+
+} RIL_Errno;
+
+typedef enum {
+    RIL_CALL_ACTIVE = 0,
+    RIL_CALL_HOLDING = 1,
+    RIL_CALL_DIALING = 2,    /* MO call only */
+    RIL_CALL_ALERTING = 3,   /* MO call only */
+    RIL_CALL_INCOMING = 4,   /* MT call only */
+    RIL_CALL_WAITING = 5     /* MT call only */
+} RIL_CallState;
+
+typedef enum {
+    RADIO_STATE_OFF = 0,                   /* Radio explictly powered off (eg CFUN=0) */
+    RADIO_STATE_UNAVAILABLE = 1,           /* Radio unavailable (eg, resetting or not booted) */
+    /* States 2-9 below are deprecated. Just leaving them here for backward compatibility. */
+    RADIO_STATE_SIM_NOT_READY = 2,         /* Radio is on, but the SIM interface is not ready */
+    RADIO_STATE_SIM_LOCKED_OR_ABSENT = 3,  /* SIM PIN locked, PUK required, network
+                                              personalization locked, or SIM absent */
+    RADIO_STATE_SIM_READY = 4,             /* Radio is on and SIM interface is available */
+    RADIO_STATE_RUIM_NOT_READY = 5,        /* Radio is on, but the RUIM interface is not ready */
+    RADIO_STATE_RUIM_READY = 6,            /* Radio is on and the RUIM interface is available */
+    RADIO_STATE_RUIM_LOCKED_OR_ABSENT = 7, /* RUIM PIN locked, PUK required, network
+                                              personalization locked, or RUIM absent */
+    RADIO_STATE_NV_NOT_READY = 8,          /* Radio is on, but the NV interface is not available */
+    RADIO_STATE_NV_READY = 9,              /* Radio is on and the NV interface is available */
+    RADIO_STATE_ON = 10                    /* Radio is on */
+} RIL_RadioState;
+
+typedef enum {
+    RADIO_TECH_UNKNOWN = 0,
+    RADIO_TECH_GPRS = 1,
+    RADIO_TECH_EDGE = 2,
+    RADIO_TECH_UMTS = 3,
+    RADIO_TECH_IS95A = 4,
+    RADIO_TECH_IS95B = 5,
+    RADIO_TECH_1xRTT =  6,
+    RADIO_TECH_EVDO_0 = 7,
+    RADIO_TECH_EVDO_A = 8,
+    RADIO_TECH_HSDPA = 9,
+    RADIO_TECH_HSUPA = 10,
+    RADIO_TECH_HSPA = 11,
+    RADIO_TECH_EVDO_B = 12,
+    RADIO_TECH_EHRPD = 13,
+    RADIO_TECH_LTE = 14,
+    RADIO_TECH_HSPAP = 15, // HSPA+
+    RADIO_TECH_GSM = 16, // Only supports voice
+    RADIO_TECH_TD_SCDMA = 17,
+    RADIO_TECH_IWLAN = 18
+} RIL_RadioTechnology;
+
+typedef enum {
+    RAF_UNKNOWN =  (1 <<  RADIO_TECH_UNKNOWN),
+    RAF_GPRS = (1 << RADIO_TECH_GPRS),
+    RAF_EDGE = (1 << RADIO_TECH_EDGE),
+    RAF_UMTS = (1 << RADIO_TECH_UMTS),
+    RAF_IS95A = (1 << RADIO_TECH_IS95A),
+    RAF_IS95B = (1 << RADIO_TECH_IS95B),
+    RAF_1xRTT = (1 << RADIO_TECH_1xRTT),
+    RAF_EVDO_0 = (1 << RADIO_TECH_EVDO_0),
+    RAF_EVDO_A = (1 << RADIO_TECH_EVDO_A),
+    RAF_HSDPA = (1 << RADIO_TECH_HSDPA),
+    RAF_HSUPA = (1 << RADIO_TECH_HSUPA),
+    RAF_HSPA = (1 << RADIO_TECH_HSPA),
+    RAF_EVDO_B = (1 << RADIO_TECH_EVDO_B),
+    RAF_EHRPD = (1 << RADIO_TECH_EHRPD),
+    RAF_LTE = (1 << RADIO_TECH_LTE),
+    RAF_HSPAP = (1 << RADIO_TECH_HSPAP),
+    RAF_GSM = (1 << RADIO_TECH_GSM),
+    RAF_TD_SCDMA = (1 << RADIO_TECH_TD_SCDMA),
+} RIL_RadioAccessFamily;
+
+typedef enum {
+    RC_PHASE_CONFIGURED = 0,  // LM is configured is initial value and value after FINISH completes
+    RC_PHASE_START      = 1,  // START is sent before Apply and indicates that an APPLY will be
+                              // forthcoming with these same parameters
+    RC_PHASE_APPLY      = 2,  // APPLY is sent after all LM's receive START and returned
+                              // RIL_RadioCapability.status = 0, if any START's fail no
+                              // APPLY will be sent
+    RC_PHASE_UNSOL_RSP  = 3,  // UNSOL_RSP is sent with RIL_UNSOL_RADIO_CAPABILITY
+    RC_PHASE_FINISH     = 4   // FINISH is sent after all commands have completed. If an error
+                              // occurs in any previous command the RIL_RadioAccessesFamily and
+                              // logicalModemUuid fields will be the prior configuration thus
+                              // restoring the configuration to the previous value. An error
+                              // returned by this command will generally be ignored or may
+                              // cause that logical modem to be removed from service.
+} RadioCapabilityPhase;
+
+typedef enum {
+    RC_STATUS_NONE       = 0, // This parameter has no meaning with RC_PHASE_START,
+                              // RC_PHASE_APPLY
+    RC_STATUS_SUCCESS    = 1, // Tell modem the action transaction of set radio
+                              // capability was success with RC_PHASE_FINISH
+    RC_STATUS_FAIL       = 2, // Tell modem the action transaction of set radio
+                              // capability is fail with RC_PHASE_FINISH.
+} RadioCapabilityStatus;
+
+#define RIL_RADIO_CAPABILITY_VERSION 1
+typedef struct {
+    int version;            // Version of structure, RIL_RADIO_CAPABILITY_VERSION
+    int session;            // Unique session value defined by framework returned in all "responses/unsol"
+    int phase;              // CONFIGURED, START, APPLY, FINISH
+    int rat;                // RIL_RadioAccessFamily for the radio
+    char logicalModemUuid[MAX_UUID_LENGTH]; // A UUID typically "com.xxxx.lmX where X is the logical modem.
+    int status;             // Return status and an input parameter for RC_PHASE_FINISH
+} RIL_RadioCapability;
+
+// Do we want to split Data from Voice and the use
+// RIL_RadioTechnology for get/setPreferredVoice/Data ?
+typedef enum {
+    PREF_NET_TYPE_GSM_WCDMA                = 0, /* GSM/WCDMA (WCDMA preferred) */
+    PREF_NET_TYPE_GSM_ONLY                 = 1, /* GSM only */
+    PREF_NET_TYPE_WCDMA                    = 2, /* WCDMA  */
+    PREF_NET_TYPE_GSM_WCDMA_AUTO           = 3, /* GSM/WCDMA (auto mode, according to PRL) */
+    PREF_NET_TYPE_CDMA_EVDO_AUTO           = 4, /* CDMA and EvDo (auto mode, according to PRL) */
+    PREF_NET_TYPE_CDMA_ONLY                = 5, /* CDMA only */
+    PREF_NET_TYPE_EVDO_ONLY                = 6, /* EvDo only */
+    PREF_NET_TYPE_GSM_WCDMA_CDMA_EVDO_AUTO = 7, /* GSM/WCDMA, CDMA, and EvDo (auto mode, according to PRL) */
+    PREF_NET_TYPE_LTE_CDMA_EVDO            = 8, /* LTE, CDMA and EvDo */
+    PREF_NET_TYPE_LTE_GSM_WCDMA            = 9, /* LTE, GSM/WCDMA */
+    PREF_NET_TYPE_LTE_CMDA_EVDO_GSM_WCDMA  = 10, /* LTE, CDMA, EvDo, GSM/WCDMA */
+    PREF_NET_TYPE_LTE_ONLY                 = 11, /* LTE only */
+    PREF_NET_TYPE_LTE_WCDMA                = 12  /* LTE/WCDMA */
+} RIL_PreferredNetworkType;
+
+/* Source for cdma subscription */
+typedef enum {
+   CDMA_SUBSCRIPTION_SOURCE_RUIM_SIM = 0,
+   CDMA_SUBSCRIPTION_SOURCE_NV = 1
+} RIL_CdmaSubscriptionSource;
+
+/* User-to-User signaling Info activation types derived from 3GPP 23.087 v8.0 */
+typedef enum {
+    RIL_UUS_TYPE1_IMPLICIT = 0,
+    RIL_UUS_TYPE1_REQUIRED = 1,
+    RIL_UUS_TYPE1_NOT_REQUIRED = 2,
+    RIL_UUS_TYPE2_REQUIRED = 3,
+    RIL_UUS_TYPE2_NOT_REQUIRED = 4,
+    RIL_UUS_TYPE3_REQUIRED = 5,
+    RIL_UUS_TYPE3_NOT_REQUIRED = 6
+} RIL_UUS_Type;
+
+/* User-to-User Signaling Information data coding schemes. Possible values for
+ * Octet 3 (Protocol Discriminator field) in the UUIE. The values have been
+ * specified in section 10.5.4.25 of 3GPP TS 24.008 */
+typedef enum {
+    RIL_UUS_DCS_USP = 0,          /* User specified protocol */
+    RIL_UUS_DCS_OSIHLP = 1,       /* OSI higher layer protocol */
+    RIL_UUS_DCS_X244 = 2,         /* X.244 */
+    RIL_UUS_DCS_RMCF = 3,         /* Reserved for system mangement
+                                     convergence function */
+    RIL_UUS_DCS_IA5c = 4          /* IA5 characters */
+} RIL_UUS_DCS;
+
+/* User-to-User Signaling Information defined in 3GPP 23.087 v8.0
+ * This data is passed in RIL_ExtensionRecord and rec contains this
+ * structure when type is RIL_UUS_INFO_EXT_REC */
+typedef struct {
+  RIL_UUS_Type    uusType;    /* UUS Type */
+  RIL_UUS_DCS     uusDcs;     /* UUS Data Coding Scheme */
+  int             uusLength;  /* Length of UUS Data */
+  char *          uusData;    /* UUS Data */
+} RIL_UUS_Info;
+
+/* CDMA Signal Information Record as defined in C.S0005 section 3.7.5.5 */
+typedef struct {
+  char isPresent;    /* non-zero if signal information record is present */
+  char signalType;   /* as defined 3.7.5.5-1 */
+  char alertPitch;   /* as defined 3.7.5.5-2 */
+  char signal;       /* as defined 3.7.5.5-3, 3.7.5.5-4 or 3.7.5.5-5 */
+} RIL_CDMA_SignalInfoRecord;
+
+typedef struct {
+    RIL_CallState   state;
+    int             index;      /* Connection Index for use with, eg, AT+CHLD */
+    int             toa;        /* type of address, eg 145 = intl */
+    char            isMpty;     /* nonzero if is mpty call */
+    char            isMT;       /* nonzero if call is mobile terminated */
+    char            als;        /* ALS line indicator if available
+                                   (0 = line 1) */
+    char            isVoice;    /* nonzero if this is is a voice call */
+    char            isVoicePrivacy;     /* nonzero if CDMA voice privacy mode is active */
+    char *          number;     /* Remote party number */
+    int             numberPresentation; /* 0=Allowed, 1=Restricted, 2=Not Specified/Unknown 3=Payphone */
+    char *          name;       /* Remote party name */
+    int             namePresentation; /* 0=Allowed, 1=Restricted, 2=Not Specified/Unknown 3=Payphone */
+    RIL_UUS_Info *  uusInfo;    /* NULL or Pointer to User-User Signaling Information */
+} RIL_Call;
+
+/* Deprecated, use RIL_Data_Call_Response_v6 */
+typedef struct {
+    int             cid;        /* Context ID, uniquely identifies this call */
+    int             active;     /* 0=inactive, 1=active/physical link down, 2=active/physical link up */
+    char *          type;       /* One of the PDP_type values in TS 27.007 section 10.1.1.
+                                   For example, "IP", "IPV6", "IPV4V6", or "PPP". */
+    char *          apn;        /* ignored */
+    char *          address;    /* An address, e.g., "192.0.1.3" or "2001:db8::1". */
+} RIL_Data_Call_Response_v4;
+
+/*
+ * Returned by RIL_REQUEST_SETUP_DATA_CALL, RIL_REQUEST_DATA_CALL_LIST
+ * and RIL_UNSOL_DATA_CALL_LIST_CHANGED, on error status != 0.
+ */
+typedef struct {
+    int             status;     /* A RIL_DataCallFailCause, 0 which is PDP_FAIL_NONE if no error */
+    int             suggestedRetryTime; /* If status != 0, this fields indicates the suggested retry
+                                           back-off timer value RIL wants to override the one
+                                           pre-configured in FW.
+                                           The unit is miliseconds.
+                                           The value < 0 means no value is suggested.
+                                           The value 0 means retry should be done ASAP.
+                                           The value of INT_MAX(0x7fffffff) means no retry. */
+    int             cid;        /* Context ID, uniquely identifies this call */
+    int             active;     /* 0=inactive, 1=active/physical link down, 2=active/physical link up */
+    char *          type;       /* One of the PDP_type values in TS 27.007 section 10.1.1.
+                                   For example, "IP", "IPV6", "IPV4V6", or "PPP". If status is
+                                   PDP_FAIL_ONLY_SINGLE_BEARER_ALLOWED this is the type supported
+                                   such as "IP" or "IPV6" */
+    char *          ifname;     /* The network interface name */
+    char *          addresses;  /* A space-delimited list of addresses with optional "/" prefix length,
+                                   e.g., "192.0.1.3" or "192.0.1.11/16 2001:db8::1/64".
+                                   May not be empty, typically 1 IPv4 or 1 IPv6 or
+                                   one of each. If the prefix length is absent the addresses
+                                   are assumed to be point to point with IPv4 having a prefix
+                                   length of 32 and IPv6 128. */
+    char *          dnses;      /* A space-delimited list of DNS server addresses,
+                                   e.g., "192.0.1.3" or "192.0.1.11 2001:db8::1".
+                                   May be empty. */
+    char *          gateways;   /* A space-delimited list of default gateway addresses,
+                                   e.g., "192.0.1.3" or "192.0.1.11 2001:db8::1".
+                                   May be empty in which case the addresses represent point
+                                   to point connections. */
+} RIL_Data_Call_Response_v6;
+
+typedef struct {
+    int             status;     /* A RIL_DataCallFailCause, 0 which is PDP_FAIL_NONE if no error */
+    int             suggestedRetryTime; /* If status != 0, this fields indicates the suggested retry
+                                           back-off timer value RIL wants to override the one
+                                           pre-configured in FW.
+                                           The unit is miliseconds.
+                                           The value < 0 means no value is suggested.
+                                           The value 0 means retry should be done ASAP.
+                                           The value of INT_MAX(0x7fffffff) means no retry. */
+    int             cid;        /* Context ID, uniquely identifies this call */
+    int             active;     /* 0=inactive, 1=active/physical link down, 2=active/physical link up */
+    char *          type;       /* One of the PDP_type values in TS 27.007 section 10.1.1.
+                                   For example, "IP", "IPV6", "IPV4V6", or "PPP". If status is
+                                   PDP_FAIL_ONLY_SINGLE_BEARER_ALLOWED this is the type supported
+                                   such as "IP" or "IPV6" */
+    char *          ifname;     /* The network interface name */
+    char *          addresses;  /* A space-delimited list of addresses with optional "/" prefix length,
+                                   e.g., "192.0.1.3" or "192.0.1.11/16 2001:db8::1/64".
+                                   May not be empty, typically 1 IPv4 or 1 IPv6 or
+                                   one of each. If the prefix length is absent the addresses
+                                   are assumed to be point to point with IPv4 having a prefix
+                                   length of 32 and IPv6 128. */
+    char *          dnses;      /* A space-delimited list of DNS server addresses,
+                                   e.g., "192.0.1.3" or "192.0.1.11 2001:db8::1".
+                                   May be empty. */
+    char *          gateways;   /* A space-delimited list of default gateway addresses,
+                                   e.g., "192.0.1.3" or "192.0.1.11 2001:db8::1".
+                                   May be empty in which case the addresses represent point
+                                   to point connections. */
+    char *          pcscf;    /* the Proxy Call State Control Function address
+                                 via PCO(Protocol Configuration Option) for IMS client. */
+} RIL_Data_Call_Response_v9;
+
+typedef struct {
+    int             status;     /* A RIL_DataCallFailCause, 0 which is PDP_FAIL_NONE if no error */
+    int             suggestedRetryTime; /* If status != 0, this fields indicates the suggested retry
+                                           back-off timer value RIL wants to override the one
+                                           pre-configured in FW.
+                                           The unit is miliseconds.
+                                           The value < 0 means no value is suggested.
+                                           The value 0 means retry should be done ASAP.
+                                           The value of INT_MAX(0x7fffffff) means no retry. */
+    int             cid;        /* Context ID, uniquely identifies this call */
+    int             active;     /* 0=inactive, 1=active/physical link down, 2=active/physical link up */
+    char *          type;       /* One of the PDP_type values in TS 27.007 section 10.1.1.
+                                   For example, "IP", "IPV6", "IPV4V6", or "PPP". If status is
+                                   PDP_FAIL_ONLY_SINGLE_BEARER_ALLOWED this is the type supported
+                                   such as "IP" or "IPV6" */
+    char *          ifname;     /* The network interface name */
+    char *          addresses;  /* A space-delimited list of addresses with optional "/" prefix length,
+                                   e.g., "192.0.1.3" or "192.0.1.11/16 2001:db8::1/64".
+                                   May not be empty, typically 1 IPv4 or 1 IPv6 or
+                                   one of each. If the prefix length is absent the addresses
+                                   are assumed to be point to point with IPv4 having a prefix
+                                   length of 32 and IPv6 128. */
+    char *          dnses;      /* A space-delimited list of DNS server addresses,
+                                   e.g., "192.0.1.3" or "192.0.1.11 2001:db8::1".
+                                   May be empty. */
+    char *          gateways;   /* A space-delimited list of default gateway addresses,
+                                   e.g., "192.0.1.3" or "192.0.1.11 2001:db8::1".
+                                   May be empty in which case the addresses represent point
+                                   to point connections. */
+    char *          pcscf;    /* the Proxy Call State Control Function address
+                                 via PCO(Protocol Configuration Option) for IMS client. */
+    int             mtu;        /* MTU received from network
+                                   Value <= 0 means network has either not sent a value or
+                                   sent an invalid value */
+} RIL_Data_Call_Response_v11;
+
+typedef enum {
+    RADIO_TECH_3GPP = 1, /* 3GPP Technologies - GSM, WCDMA */
+    RADIO_TECH_3GPP2 = 2 /* 3GPP2 Technologies - CDMA */
+} RIL_RadioTechnologyFamily;
+
+typedef struct {
+    RIL_RadioTechnologyFamily tech;
+    unsigned char             retry;       /* 0 == not retry, nonzero == retry */
+    int                       messageRef;  /* Valid field if retry is set to nonzero.
+                                              Contains messageRef from RIL_SMS_Response
+                                              corresponding to failed MO SMS.
+                                            */
+
+    union {
+        /* Valid field if tech is RADIO_TECH_3GPP2. See RIL_REQUEST_CDMA_SEND_SMS */
+        RIL_CDMA_SMS_Message* cdmaMessage;
+
+        /* Valid field if tech is RADIO_TECH_3GPP. See RIL_REQUEST_SEND_SMS */
+        char**                gsmMessage;
+    } message;
+} RIL_IMS_SMS_Message;
+
+typedef struct {
+    int messageRef;   /* TP-Message-Reference for GSM,
+                         and BearerData MessageId for CDMA
+                         (See 3GPP2 C.S0015-B, v2.0, table 4.5-1). */
+    char *ackPDU;     /* or NULL if n/a */
+    int errorCode;    /* See 3GPP 27.005, 3.2.5 for GSM/UMTS,
+                         3GPP2 N.S0005 (IS-41C) Table 171 for CDMA,
+                         -1 if unknown or not applicable*/
+} RIL_SMS_Response;
+
+/** Used by RIL_REQUEST_WRITE_SMS_TO_SIM */
+typedef struct {
+    int status;     /* Status of message.  See TS 27.005 3.1, "<stat>": */
+                    /*      0 = "REC UNREAD"    */
+                    /*      1 = "REC READ"      */
+                    /*      2 = "STO UNSENT"    */
+                    /*      3 = "STO SENT"      */
+    char * pdu;     /* PDU of message to write, as an ASCII hex string less the SMSC address,
+                       the TP-layer length is "strlen(pdu)/2". */
+    char * smsc;    /* SMSC address in GSM BCD format prefixed by a length byte
+                       (as expected by TS 27.005) or NULL for default SMSC */
+} RIL_SMS_WriteArgs;
+
+/** Used by RIL_REQUEST_DIAL */
+typedef struct {
+    char * address;
+    int clir;
+            /* (same as 'n' paremeter in TS 27.007 7.7 "+CLIR"
+             * clir == 0 on "use subscription default value"
+             * clir == 1 on "CLIR invocation" (restrict CLI presentation)
+             * clir == 2 on "CLIR suppression" (allow CLI presentation)
+             */
+    RIL_UUS_Info *  uusInfo;    /* NULL or Pointer to User-User Signaling Information */
+} RIL_Dial;
+
+typedef struct {
+    int command;    /* one of the commands listed for TS 27.007 +CRSM*/
+    int fileid;     /* EF id */
+    char *path;     /* "pathid" from TS 27.007 +CRSM command.
+                       Path is in hex asciii format eg "7f205f70"
+                       Path must always be provided.
+                     */
+    int p1;
+    int p2;
+    int p3;
+    char *data;     /* May be NULL*/
+    char *pin2;     /* May be NULL*/
+} RIL_SIM_IO_v5;
+
+typedef struct {
+    int command;    /* one of the commands listed for TS 27.007 +CRSM*/
+    int fileid;     /* EF id */
+    char *path;     /* "pathid" from TS 27.007 +CRSM command.
+                       Path is in hex asciii format eg "7f205f70"
+                       Path must always be provided.
+                     */
+    int p1;
+    int p2;
+    int p3;
+    char *data;     /* May be NULL*/
+    char *pin2;     /* May be NULL*/
+    char *aidPtr;   /* AID value, See ETSI 102.221 8.1 and 101.220 4, NULL if no value. */
+} RIL_SIM_IO_v6;
+
+/* Used by RIL_REQUEST_SIM_TRANSMIT_APDU_CHANNEL and
+ * RIL_REQUEST_SIM_TRANSMIT_APDU_BASIC. */
+typedef struct {
+    int sessionid;  /* "sessionid" from TS 27.007 +CGLA command. Should be
+                       ignored for +CSIM command. */
+
+    /* Following fields are used to derive the APDU ("command" and "length"
+       values in TS 27.007 +CSIM and +CGLA commands). */
+    int cla;
+    int instruction;
+    int p1;
+    int p2;
+    int p3;         /* A negative P3 implies a 4 byte APDU. */
+    char *data;     /* May be NULL. In hex string format. */
+} RIL_SIM_APDU;
+
+typedef struct {
+    int sw1;
+    int sw2;
+    char *simResponse;  /* In hex string format ([a-fA-F0-9]*), except for SIM_AUTHENTICATION
+                           response for which it is in Base64 format, see 3GPP TS 31.102 7.1.2 */
+} RIL_SIM_IO_Response;
+
+/* See also com.android.internal.telephony.gsm.CallForwardInfo */
+
+typedef struct {
+    int             status;     /*
+                                 * For RIL_REQUEST_QUERY_CALL_FORWARD_STATUS
+                                 * status 1 = active, 0 = not active
+                                 *
+                                 * For RIL_REQUEST_SET_CALL_FORWARD:
+                                 * status is:
+                                 * 0 = disable
+                                 * 1 = enable
+                                 * 2 = interrogate
+                                 * 3 = registeration
+                                 * 4 = erasure
+                                 */
+
+    int             reason;      /* from TS 27.007 7.11 "reason" */
+    int             serviceClass;/* From 27.007 +CCFC/+CLCK "class"
+                                    See table for Android mapping from
+                                    MMI service code
+                                    0 means user doesn't input class */
+    int             toa;         /* "type" from TS 27.007 7.11 */
+    char *          number;      /* "number" from TS 27.007 7.11. May be NULL */
+    int             timeSeconds; /* for CF no reply only */
+}RIL_CallForwardInfo;
+
+typedef struct {
+   char * cid;         /* Combination of LAC and Cell Id in 32 bits in GSM.
+                        * Upper 16 bits is LAC and lower 16 bits
+                        * is CID (as described in TS 27.005)
+                        * Primary Scrambling Code (as described in TS 25.331)
+                        *         in 9 bits in UMTS
+                        * Valid values are hexadecimal 0x0000 - 0xffffffff.
+                        */
+   int    rssi;        /* Received RSSI in GSM,
+                        * Level index of CPICH Received Signal Code Power in UMTS
+                        */
+} RIL_NeighboringCell;
+
+typedef struct {
+  char lce_status;                 /* LCE service status:
+                                    * -1 = not supported;
+                                    * 0 = stopped;
+                                    * 1 = active.
+                                    */
+  unsigned int actual_interval_ms; /* actual LCE reporting interval,
+                                    * meaningful only if LCEStatus = 1.
+                                    */
+} RIL_LceStatusInfo;
+
+typedef struct {
+  unsigned int last_hop_capacity_kbps; /* last-hop cellular capacity: kilobits/second. */
+  unsigned char confidence_level;      /* capacity estimate confidence: 0-100 */
+  unsigned char lce_suspended;         /* LCE report going to be suspended? (e.g., radio
+                                        * moves to inactive state or network type change)
+                                        * 1 = suspended;
+                                        * 0 = not suspended.
+                                        */
+} RIL_LceDataInfo;
+
+/* See RIL_REQUEST_LAST_CALL_FAIL_CAUSE */
+typedef enum {
+    CALL_FAIL_UNOBTAINABLE_NUMBER = 1,
+    CALL_FAIL_NORMAL = 16,
+    CALL_FAIL_BUSY = 17,
+    CALL_FAIL_CONGESTION = 34,
+    CALL_FAIL_ACM_LIMIT_EXCEEDED = 68,
+    CALL_FAIL_CALL_BARRED = 240,
+    CALL_FAIL_FDN_BLOCKED = 241,
+    CALL_FAIL_IMSI_UNKNOWN_IN_VLR = 242,
+    CALL_FAIL_IMEI_NOT_ACCEPTED = 243,
+    CALL_FAIL_DIAL_MODIFIED_TO_USSD = 244, /* STK Call Control */
+    CALL_FAIL_DIAL_MODIFIED_TO_SS = 245,
+    CALL_FAIL_DIAL_MODIFIED_TO_DIAL = 246,
+    CALL_FAIL_CDMA_LOCKED_UNTIL_POWER_CYCLE = 1000,
+    CALL_FAIL_CDMA_DROP = 1001,
+    CALL_FAIL_CDMA_INTERCEPT = 1002,
+    CALL_FAIL_CDMA_REORDER = 1003,
+    CALL_FAIL_CDMA_SO_REJECT = 1004,
+    CALL_FAIL_CDMA_RETRY_ORDER = 1005,
+    CALL_FAIL_CDMA_ACCESS_FAILURE = 1006,
+    CALL_FAIL_CDMA_PREEMPTED = 1007,
+    CALL_FAIL_CDMA_NOT_EMERGENCY = 1008, /* For non-emergency number dialed
+                                            during emergency callback mode */
+    CALL_FAIL_CDMA_ACCESS_BLOCKED = 1009, /* CDMA network access probes blocked */
+    CALL_FAIL_ERROR_UNSPECIFIED = 0xffff
+} RIL_LastCallFailCause;
+
+typedef struct {
+  RIL_LastCallFailCause cause_code;
+  char *                vendor_cause;
+} RIL_LastCallFailCauseInfo;
+
+/* See RIL_REQUEST_LAST_DATA_CALL_FAIL_CAUSE */
+typedef enum {
+    PDP_FAIL_NONE = 0, /* No error, connection ok */
+
+    /* an integer cause code defined in TS 24.008
+       section 6.1.3.1.3 or TS 24.301 Release 8+ Annex B.
+       If the implementation does not have access to the exact cause codes,
+       then it should return one of the following values,
+       as the UI layer needs to distinguish these
+       cases for error notification and potential retries. */
+    PDP_FAIL_OPERATOR_BARRED = 0x08,               /* no retry */
+    PDP_FAIL_INSUFFICIENT_RESOURCES = 0x1A,
+    PDP_FAIL_MISSING_UKNOWN_APN = 0x1B,            /* no retry */
+    PDP_FAIL_UNKNOWN_PDP_ADDRESS_TYPE = 0x1C,      /* no retry */
+    PDP_FAIL_USER_AUTHENTICATION = 0x1D,           /* no retry */
+    PDP_FAIL_ACTIVATION_REJECT_GGSN = 0x1E,        /* no retry */
+    PDP_FAIL_ACTIVATION_REJECT_UNSPECIFIED = 0x1F,
+    PDP_FAIL_SERVICE_OPTION_NOT_SUPPORTED = 0x20,  /* no retry */
+    PDP_FAIL_SERVICE_OPTION_NOT_SUBSCRIBED = 0x21, /* no retry */
+    PDP_FAIL_SERVICE_OPTION_OUT_OF_ORDER = 0x22,
+    PDP_FAIL_NSAPI_IN_USE = 0x23,                  /* no retry */
+    PDP_FAIL_REGULAR_DEACTIVATION = 0x24,          /* possibly restart radio,
+                                                      based on framework config */
+    PDP_FAIL_ONLY_IPV4_ALLOWED = 0x32,             /* no retry */
+    PDP_FAIL_ONLY_IPV6_ALLOWED = 0x33,             /* no retry */
+    PDP_FAIL_ONLY_SINGLE_BEARER_ALLOWED = 0x34,
+    PDP_FAIL_PROTOCOL_ERRORS   = 0x6F,             /* no retry */
+
+    /* Not mentioned in the specification */
+    PDP_FAIL_VOICE_REGISTRATION_FAIL = -1,
+    PDP_FAIL_DATA_REGISTRATION_FAIL = -2,
+
+   /* reasons for data call drop - network/modem disconnect */
+    PDP_FAIL_SIGNAL_LOST = -3,
+    PDP_FAIL_PREF_RADIO_TECH_CHANGED = -4,/* preferred technology has changed, should retry
+                                             with parameters appropriate for new technology */
+    PDP_FAIL_RADIO_POWER_OFF = -5,        /* data call was disconnected because radio was resetting,
+                                             powered off - no retry */
+    PDP_FAIL_TETHERED_CALL_ACTIVE = -6,   /* data call was disconnected by modem because tethered
+                                             mode was up on same APN/data profile - no retry until
+                                             tethered call is off */
+
+    PDP_FAIL_ERROR_UNSPECIFIED = 0xffff,  /* retry silently */
+} RIL_DataCallFailCause;
+
+/* See RIL_REQUEST_SETUP_DATA_CALL */
+typedef enum {
+    RIL_DATA_PROFILE_DEFAULT    = 0,
+    RIL_DATA_PROFILE_TETHERED   = 1,
+    RIL_DATA_PROFILE_IMS        = 2,
+    RIL_DATA_PROFILE_FOTA       = 3,
+    RIL_DATA_PROFILE_CBS        = 4,
+    RIL_DATA_PROFILE_OEM_BASE   = 1000,    /* Start of OEM-specific profiles */
+    RIL_DATA_PROFILE_INVALID    = 0xFFFFFFFF
+} RIL_DataProfile;
+
+/* Used by RIL_UNSOL_SUPP_SVC_NOTIFICATION */
+typedef struct {
+    int     notificationType;   /*
+                                 * 0 = MO intermediate result code
+                                 * 1 = MT unsolicited result code
+                                 */
+    int     code;               /* See 27.007 7.17
+                                   "code1" for MO
+                                   "code2" for MT. */
+    int     index;              /* CUG index. See 27.007 7.17. */
+    int     type;               /* "type" from 27.007 7.17 (MT only). */
+    char *  number;             /* "number" from 27.007 7.17
+                                   (MT only, may be NULL). */
+} RIL_SuppSvcNotification;
+
+#define RIL_CARD_MAX_APPS     8
+
+typedef enum {
+    RIL_CARDSTATE_ABSENT   = 0,
+    RIL_CARDSTATE_PRESENT  = 1,
+    RIL_CARDSTATE_ERROR    = 2
+} RIL_CardState;
+
+typedef enum {
+    RIL_PERSOSUBSTATE_UNKNOWN                   = 0, /* initial state */
+    RIL_PERSOSUBSTATE_IN_PROGRESS               = 1, /* in between each lock transition */
+    RIL_PERSOSUBSTATE_READY                     = 2, /* when either SIM or RUIM Perso is finished
+                                                        since each app can only have 1 active perso
+                                                        involved */
+    RIL_PERSOSUBSTATE_SIM_NETWORK               = 3,
+    RIL_PERSOSUBSTATE_SIM_NETWORK_SUBSET        = 4,
+    RIL_PERSOSUBSTATE_SIM_CORPORATE             = 5,
+    RIL_PERSOSUBSTATE_SIM_SERVICE_PROVIDER      = 6,
+    RIL_PERSOSUBSTATE_SIM_SIM                   = 7,
+    RIL_PERSOSUBSTATE_SIM_NETWORK_PUK           = 8, /* The corresponding perso lock is blocked */
+    RIL_PERSOSUBSTATE_SIM_NETWORK_SUBSET_PUK    = 9,
+    RIL_PERSOSUBSTATE_SIM_CORPORATE_PUK         = 10,
+    RIL_PERSOSUBSTATE_SIM_SERVICE_PROVIDER_PUK  = 11,
+    RIL_PERSOSUBSTATE_SIM_SIM_PUK               = 12,
+    RIL_PERSOSUBSTATE_RUIM_NETWORK1             = 13,
+    RIL_PERSOSUBSTATE_RUIM_NETWORK2             = 14,
+    RIL_PERSOSUBSTATE_RUIM_HRPD                 = 15,
+    RIL_PERSOSUBSTATE_RUIM_CORPORATE            = 16,
+    RIL_PERSOSUBSTATE_RUIM_SERVICE_PROVIDER     = 17,
+    RIL_PERSOSUBSTATE_RUIM_RUIM                 = 18,
+    RIL_PERSOSUBSTATE_RUIM_NETWORK1_PUK         = 19, /* The corresponding perso lock is blocked */
+    RIL_PERSOSUBSTATE_RUIM_NETWORK2_PUK         = 20,
+    RIL_PERSOSUBSTATE_RUIM_HRPD_PUK             = 21,
+    RIL_PERSOSUBSTATE_RUIM_CORPORATE_PUK        = 22,
+    RIL_PERSOSUBSTATE_RUIM_SERVICE_PROVIDER_PUK = 23,
+    RIL_PERSOSUBSTATE_RUIM_RUIM_PUK             = 24
+} RIL_PersoSubstate;
+
+typedef enum {
+    RIL_APPSTATE_UNKNOWN               = 0,
+    RIL_APPSTATE_DETECTED              = 1,
+    RIL_APPSTATE_PIN                   = 2, /* If PIN1 or UPin is required */
+    RIL_APPSTATE_PUK                   = 3, /* If PUK1 or Puk for UPin is required */
+    RIL_APPSTATE_SUBSCRIPTION_PERSO    = 4, /* perso_substate should be look at
+                                               when app_state is assigned to this value */
+    RIL_APPSTATE_READY                 = 5
+} RIL_AppState;
+
+typedef enum {
+    RIL_PINSTATE_UNKNOWN              = 0,
+    RIL_PINSTATE_ENABLED_NOT_VERIFIED = 1,
+    RIL_PINSTATE_ENABLED_VERIFIED     = 2,
+    RIL_PINSTATE_DISABLED             = 3,
+    RIL_PINSTATE_ENABLED_BLOCKED      = 4,
+    RIL_PINSTATE_ENABLED_PERM_BLOCKED = 5
+} RIL_PinState;
+
+typedef enum {
+  RIL_APPTYPE_UNKNOWN = 0,
+  RIL_APPTYPE_SIM     = 1,
+  RIL_APPTYPE_USIM    = 2,
+  RIL_APPTYPE_RUIM    = 3,
+  RIL_APPTYPE_CSIM    = 4,
+  RIL_APPTYPE_ISIM    = 5
+} RIL_AppType;
+
+typedef struct
+{
+  RIL_AppType      app_type;
+  RIL_AppState     app_state;
+  RIL_PersoSubstate perso_substate; /* applicable only if app_state ==
+                                       RIL_APPSTATE_SUBSCRIPTION_PERSO */
+  char             *aid_ptr;        /* null terminated string, e.g., from 0xA0, 0x00 -> 0x41,
+                                       0x30, 0x30, 0x30 */
+  char             *app_label_ptr;  /* null terminated string */
+  int              pin1_replaced;   /* applicable to USIM, CSIM & ISIM */
+  RIL_PinState     pin1;
+  RIL_PinState     pin2;
+  int              foo1;            /* Samsung */
+  int              foo2;            /* Samsung */
+  int              foo3;            /* Samsung */
+  int              foo4;            /* Samsung */
+  int              foo5;            /* Samsung */
+} RIL_AppStatus;
+
+/* Deprecated, use RIL_CardStatus_v6 */
+typedef struct
+{
+  RIL_CardState card_state;
+  RIL_PinState  universal_pin_state;             /* applicable to USIM and CSIM: RIL_PINSTATE_xxx */
+  int           gsm_umts_subscription_app_index; /* value < RIL_CARD_MAX_APPS, -1 if none */
+  int           cdma_subscription_app_index;     /* value < RIL_CARD_MAX_APPS, -1 if none */
+  int           num_applications;                /* value <= RIL_CARD_MAX_APPS */
+  RIL_AppStatus applications[RIL_CARD_MAX_APPS];
+} RIL_CardStatus_v5;
+
+typedef struct
+{
+  RIL_CardState card_state;
+  RIL_PinState  universal_pin_state;             /* applicable to USIM and CSIM: RIL_PINSTATE_xxx */
+  int           gsm_umts_subscription_app_index; /* value < RIL_CARD_MAX_APPS, -1 if none */
+  int           cdma_subscription_app_index;     /* value < RIL_CARD_MAX_APPS, -1 if none */
+  int           ims_subscription_app_index;      /* value < RIL_CARD_MAX_APPS, -1 if none */
+  int           num_applications;                /* value <= RIL_CARD_MAX_APPS */
+  RIL_AppStatus applications[RIL_CARD_MAX_APPS];
+} RIL_CardStatus_v6;
+
+/** The result of a SIM refresh, returned in data[0] of RIL_UNSOL_SIM_REFRESH
+ *      or as part of RIL_SimRefreshResponse_v7
+ */
+typedef enum {
+    /* A file on SIM has been updated.  data[1] contains the EFID. */
+    SIM_FILE_UPDATE = 0,
+    /* SIM initialized.  All files should be re-read. */
+    SIM_INIT = 1,
+    /* SIM reset.  SIM power required, SIM may be locked and all files should be re-read. */
+    SIM_RESET = 2
+} RIL_SimRefreshResult;
+
+typedef struct {
+    RIL_SimRefreshResult result;
+    int                  ef_id; /* is the EFID of the updated file if the result is */
+                                /* SIM_FILE_UPDATE or 0 for any other result. */
+    char *               aid;   /* is AID(application ID) of the card application */
+                                /* See ETSI 102.221 8.1 and 101.220 4 */
+                                /*     For SIM_FILE_UPDATE result it can be set to AID of */
+                                /*         application in which updated EF resides or it can be */
+                                /*         NULL if EF is outside of an application. */
+                                /*     For SIM_INIT result this field is set to AID of */
+                                /*         application that caused REFRESH */
+                                /*     For SIM_RESET result it is NULL. */
+} RIL_SimRefreshResponse_v7;
+
+/* Deprecated, use RIL_CDMA_CallWaiting_v6 */
+typedef struct {
+    char *          number;             /* Remote party number */
+    int             numberPresentation; /* 0=Allowed, 1=Restricted, 2=Not Specified/Unknown */
+    char *          name;               /* Remote party name */
+    RIL_CDMA_SignalInfoRecord signalInfoRecord;
+} RIL_CDMA_CallWaiting_v5;
+
+typedef struct {
+    char *          number;             /* Remote party number */
+    int             numberPresentation; /* 0=Allowed, 1=Restricted, 2=Not Specified/Unknown */
+    char *          name;               /* Remote party name */
+    RIL_CDMA_SignalInfoRecord signalInfoRecord;
+    /* Number type/Number plan required to support International Call Waiting */
+    int             number_type;        /* 0=Unknown, 1=International, 2=National,
+                                           3=Network specific, 4=subscriber */
+    int             number_plan;        /* 0=Unknown, 1=ISDN, 3=Data, 4=Telex, 8=Nat'l, 9=Private */
+} RIL_CDMA_CallWaiting_v6;
+
+/**
+ * Which types of Cell Broadcast Message (CBM) are to be received by the ME
+ *
+ * uFromServiceID - uToServiceID defines a range of CBM message identifiers
+ * whose value is 0x0000 - 0xFFFF as defined in TS 23.041 9.4.1.2.2 for GMS
+ * and 9.4.4.2.2 for UMTS. All other values can be treated as empty
+ * CBM message ID.
+ *
+ * uFromCodeScheme - uToCodeScheme defines a range of CBM data coding schemes
+ * whose value is 0x00 - 0xFF as defined in TS 23.041 9.4.1.2.3 for GMS
+ * and 9.4.4.2.3 for UMTS.
+ * All other values can be treated as empty CBM data coding scheme.
+ *
+ * selected 0 means message types specified in <fromServiceId, toServiceId>
+ * and <fromCodeScheme, toCodeScheme>are not accepted, while 1 means accepted.
+ *
+ * Used by RIL_REQUEST_GSM_GET_BROADCAST_CONFIG and
+ * RIL_REQUEST_GSM_SET_BROADCAST_CONFIG.
+ */
+typedef struct {
+    int fromServiceId;
+    int toServiceId;
+    int fromCodeScheme;
+    int toCodeScheme;
+    unsigned char selected;
+} RIL_GSM_BroadcastSmsConfigInfo;
+
+/* No restriction at all including voice/SMS/USSD/SS/AV64 and packet data. */
+#define RIL_RESTRICTED_STATE_NONE           0x00
+/* Block emergency call due to restriction. But allow all normal voice/SMS/USSD/SS/AV64. */
+#define RIL_RESTRICTED_STATE_CS_EMERGENCY   0x01
+/* Block all normal voice/SMS/USSD/SS/AV64 due to restriction. Only Emergency call allowed. */
+#define RIL_RESTRICTED_STATE_CS_NORMAL      0x02
+/* Block all voice/SMS/USSD/SS/AV64 including emergency call due to restriction.*/
+#define RIL_RESTRICTED_STATE_CS_ALL         0x04
+/* Block packet data access due to restriction. */
+#define RIL_RESTRICTED_STATE_PS_ALL         0x10
+
+/* The status for an OTASP/OTAPA session */
+typedef enum {
+    CDMA_OTA_PROVISION_STATUS_SPL_UNLOCKED,
+    CDMA_OTA_PROVISION_STATUS_SPC_RETRIES_EXCEEDED,
+    CDMA_OTA_PROVISION_STATUS_A_KEY_EXCHANGED,
+    CDMA_OTA_PROVISION_STATUS_SSD_UPDATED,
+    CDMA_OTA_PROVISION_STATUS_NAM_DOWNLOADED,
+    CDMA_OTA_PROVISION_STATUS_MDN_DOWNLOADED,
+    CDMA_OTA_PROVISION_STATUS_IMSI_DOWNLOADED,
+    CDMA_OTA_PROVISION_STATUS_PRL_DOWNLOADED,
+    CDMA_OTA_PROVISION_STATUS_COMMITTED,
+    CDMA_OTA_PROVISION_STATUS_OTAPA_STARTED,
+    CDMA_OTA_PROVISION_STATUS_OTAPA_STOPPED,
+    CDMA_OTA_PROVISION_STATUS_OTAPA_ABORTED
+} RIL_CDMA_OTA_ProvisionStatus;
+
+typedef struct {
+    int signalStrength;  /* Valid values are (0-31, 99) as defined in TS 27.007 8.5 */
+    int bitErrorRate;    /* bit error rate (0-7, 99) as defined in TS 27.007 8.5 */
+} RIL_GW_SignalStrength;
+
+typedef struct {
+    int signalStrength;  /* Valid values are (0-31, 99) as defined in TS 27.007 8.5 */
+    int bitErrorRate;    /* bit error rate (0-7, 99) as defined in TS 27.007 8.5 */
+} RIL_SignalStrengthWcdma;
+
+typedef struct {
+    int dbm;  /* Valid values are positive integers.  This value is the actual RSSI value
+               * multiplied by -1.  Example: If the actual RSSI is -75, then this response
+               * value will be 75.
+               */
+    int ecio; /* Valid values are positive integers.  This value is the actual Ec/Io multiplied
+               * by -10.  Example: If the actual Ec/Io is -12.5 dB, then this response value
+               * will be 125.
+               */
+} RIL_CDMA_SignalStrength;
+
+
+typedef struct {
+    int dbm;  /* Valid values are positive integers.  This value is the actual RSSI value
+               * multiplied by -1.  Example: If the actual RSSI is -75, then this response
+               * value will be 75.
+               */
+    int ecio; /* Valid values are positive integers.  This value is the actual Ec/Io multiplied
+               * by -10.  Example: If the actual Ec/Io is -12.5 dB, then this response value
+               * will be 125.
+               */
+    int signalNoiseRatio; /* Valid values are 0-8.  8 is the highest signal to noise ratio. */
+} RIL_EVDO_SignalStrength;
+
+typedef struct {
+    int signalStrength;  /* Valid values are (0-31, 99) as defined in TS 27.007 8.5 */
+    int rsrp;            /* The current Reference Signal Receive Power in dBm multipled by -1.
+                          * Range: 44 to 140 dBm
+                          * INT_MAX: 0x7FFFFFFF denotes invalid value.
+                          * Reference: 3GPP TS 36.133 9.1.4 */
+    int rsrq;            /* The current Reference Signal Receive Quality in dB multiplied by -1.
+                          * Range: 20 to 3 dB.
+                          * INT_MAX: 0x7FFFFFFF denotes invalid value.
+                          * Reference: 3GPP TS 36.133 9.1.7 */
+    int rssnr;           /* The current reference signal signal-to-noise ratio in 0.1 dB units.
+                          * Range: -200 to +300 (-200 = -20.0 dB, +300 = 30dB).
+                          * INT_MAX : 0x7FFFFFFF denotes invalid value.
+                          * Reference: 3GPP TS 36.101 8.1.1 */
+    int cqi;             /* The current Channel Quality Indicator.
+                          * Range: 0 to 15.
+                          * INT_MAX : 0x7FFFFFFF denotes invalid value.
+                          * Reference: 3GPP TS 36.101 9.2, 9.3, A.4 */
+} RIL_LTE_SignalStrength;
+
+typedef struct {
+    int signalStrength;  /* Valid values are (0-31, 99) as defined in TS 27.007 8.5 */
+    int rsrp;            /* The current Reference Signal Receive Power in dBm multipled by -1.
+                          * Range: 44 to 140 dBm
+                          * INT_MAX: 0x7FFFFFFF denotes invalid value.
+                          * Reference: 3GPP TS 36.133 9.1.4 */
+    int rsrq;            /* The current Reference Signal Receive Quality in dB multiplied by -1.
+                          * Range: 20 to 3 dB.
+                          * INT_MAX: 0x7FFFFFFF denotes invalid value.
+                          * Reference: 3GPP TS 36.133 9.1.7 */
+    int rssnr;           /* The current reference signal signal-to-noise ratio in 0.1 dB units.
+                          * Range: -200 to +300 (-200 = -20.0 dB, +300 = 30dB).
+                          * INT_MAX : 0x7FFFFFFF denotes invalid value.
+                          * Reference: 3GPP TS 36.101 8.1.1 */
+    int cqi;             /* The current Channel Quality Indicator.
+                          * Range: 0 to 15.
+                          * INT_MAX : 0x7FFFFFFF denotes invalid value.
+                          * Reference: 3GPP TS 36.101 9.2, 9.3, A.4 */
+    int timingAdvance;   /* timing advance in micro seconds for a one way trip from cell to device.
+                          * Approximate distance can be calculated using 300m/us * timingAdvance.
+                          * Range: 0 to 0x7FFFFFFE
+                          * INT_MAX : 0x7FFFFFFF denotes invalid value.
+                          * Reference: 3GPP 36.321 section 6.1.3.5
+                          * also: http://www.cellular-planningoptimization.com/2010/02/timing-advance-with-calculation.html */
+} RIL_LTE_SignalStrength_v8;
+
+typedef struct {
+    int rscp;    /* The Received Signal Code Power in dBm multipled by -1.
+                  * Range : 25 to 120
+                  * INT_MAX: 0x7FFFFFFF denotes invalid value.
+                  * Reference: 3GPP TS 25.123, section 9.1.1.1 */
+} RIL_TD_SCDMA_SignalStrength;
+
+/* Deprecated, use RIL_SignalStrength_v6 */
+typedef struct {
+    RIL_GW_SignalStrength   GW_SignalStrength;
+    RIL_CDMA_SignalStrength CDMA_SignalStrength;
+    RIL_EVDO_SignalStrength EVDO_SignalStrength;
+} RIL_SignalStrength_v5;
+
+typedef struct {
+    RIL_GW_SignalStrength   GW_SignalStrength;
+    RIL_CDMA_SignalStrength CDMA_SignalStrength;
+    RIL_EVDO_SignalStrength EVDO_SignalStrength;
+    RIL_LTE_SignalStrength  LTE_SignalStrength;
+} RIL_SignalStrength_v6;
+
+typedef struct {
+    RIL_GW_SignalStrength       GW_SignalStrength;
+    RIL_CDMA_SignalStrength     CDMA_SignalStrength;
+    RIL_EVDO_SignalStrength     EVDO_SignalStrength;
+    RIL_LTE_SignalStrength_v8   LTE_SignalStrength;
+} RIL_SignalStrength_v8;
+
+typedef struct {
+    RIL_GW_SignalStrength       GW_SignalStrength;
+    RIL_CDMA_SignalStrength     CDMA_SignalStrength;
+    RIL_EVDO_SignalStrength     EVDO_SignalStrength;
+    RIL_LTE_SignalStrength_v8   LTE_SignalStrength;
+    RIL_TD_SCDMA_SignalStrength TD_SCDMA_SignalStrength;
+} RIL_SignalStrength_v10;
+
+/** RIL_CellIdentityGsm */
+typedef struct {
+    int mcc;    /* 3-digit Mobile Country Code, 0..999, INT_MAX if unknown */
+    int mnc;    /* 2 or 3-digit Mobile Network Code, 0..999, INT_MAX if unknown */
+    int lac;    /* 16-bit Location Area Code, 0..65535, INT_MAX if unknown  */
+    int cid;    /* 16-bit GSM Cell Identity described in TS 27.007, 0..65535, INT_MAX if unknown  */
+} RIL_CellIdentityGsm;
+
+/** RIL_CellIdentityWcdma */
+typedef struct {
+    int mcc;    /* 3-digit Mobile Country Code, 0..999, INT_MAX if unknown  */
+    int mnc;    /* 2 or 3-digit Mobile Network Code, 0..999, INT_MAX if unknown  */
+    int lac;    /* 16-bit Location Area Code, 0..65535, INT_MAX if unknown  */
+    int cid;    /* 28-bit UMTS Cell Identity described in TS 25.331, 0..268435455, INT_MAX if unknown  */
+    int psc;    /* 9-bit UMTS Primary Scrambling Code described in TS 25.331, 0..511, INT_MAX if unknown */
+} RIL_CellIdentityWcdma;
+
+/** RIL_CellIdentityCdma */
+typedef struct {
+    int networkId;      /* Network Id 0..65535, INT_MAX if unknown */
+    int systemId;       /* CDMA System Id 0..32767, INT_MAX if unknown  */
+    int basestationId;  /* Base Station Id 0..65535, INT_MAX if unknown  */
+    int longitude;      /* Longitude is a decimal number as specified in 3GPP2 C.S0005-A v6.0.
+                         * It is represented in units of 0.25 seconds and ranges from -2592000
+                         * to 2592000, both values inclusive (corresponding to a range of -180
+                         * to +180 degrees). INT_MAX if unknown */
+
+    int latitude;       /* Latitude is a decimal number as specified in 3GPP2 C.S0005-A v6.0.
+                         * It is represented in units of 0.25 seconds and ranges from -1296000
+                         * to 1296000, both values inclusive (corresponding to a range of -90
+                         * to +90 degrees). INT_MAX if unknown */
+} RIL_CellIdentityCdma;
+
+/** RIL_CellIdentityLte */
+typedef struct {
+    int mcc;    /* 3-digit Mobile Country Code, 0..999, INT_MAX if unknown  */
+    int mnc;    /* 2 or 3-digit Mobile Network Code, 0..999, INT_MAX if unknown  */
+    int ci;     /* 28-bit Cell Identity described in TS ???, INT_MAX if unknown */
+    int pci;    /* physical cell id 0..503, INT_MAX if unknown  */
+    int tac;    /* 16-bit tracking area code, INT_MAX if unknown  */
+} RIL_CellIdentityLte;
+
+/** RIL_CellIdentityTdscdma */
+typedef struct {
+    int mcc;    /* 3-digit Mobile Country Code, 0..999, INT_MAX if unknown  */
+    int mnc;    /* 2 or 3-digit Mobile Network Code, 0..999, INT_MAX if unknown  */
+    int lac;    /* 16-bit Location Area Code, 0..65535, INT_MAX if unknown  */
+    int cid;    /* 28-bit UMTS Cell Identity described in TS 25.331, 0..268435455, INT_MAX if unknown  */
+    int cpid;    /* 8-bit Cell Parameters ID described in TS 25.331, 0..127, INT_MAX if unknown */
+} RIL_CellIdentityTdscdma;
+
+/** RIL_CellInfoGsm */
+typedef struct {
+  RIL_CellIdentityGsm   cellIdentityGsm;
+  RIL_GW_SignalStrength signalStrengthGsm;
+} RIL_CellInfoGsm;
+
+/** RIL_CellInfoWcdma */
+typedef struct {
+  RIL_CellIdentityWcdma cellIdentityWcdma;
+  RIL_SignalStrengthWcdma signalStrengthWcdma;
+} RIL_CellInfoWcdma;
+
+/** RIL_CellInfoCdma */
+typedef struct {
+  RIL_CellIdentityCdma      cellIdentityCdma;
+  RIL_CDMA_SignalStrength   signalStrengthCdma;
+  RIL_EVDO_SignalStrength   signalStrengthEvdo;
+} RIL_CellInfoCdma;
+
+/** RIL_CellInfoLte */
+typedef struct {
+  RIL_CellIdentityLte        cellIdentityLte;
+  RIL_LTE_SignalStrength_v8  signalStrengthLte;
+} RIL_CellInfoLte;
+
+/** RIL_CellInfoTdscdma */
+typedef struct {
+  RIL_CellIdentityTdscdma cellIdentityTdscdma;
+  RIL_TD_SCDMA_SignalStrength signalStrengthTdscdma;
+} RIL_CellInfoTdscdma;
+
+// Must be the same as CellInfo.TYPE_XXX
+typedef enum {
+  RIL_CELL_INFO_TYPE_GSM    = 1,
+  RIL_CELL_INFO_TYPE_CDMA   = 2,
+  RIL_CELL_INFO_TYPE_LTE    = 3,
+  RIL_CELL_INFO_TYPE_WCDMA  = 4,
+  RIL_CELL_INFO_TYPE_TD_SCDMA  = 5
+} RIL_CellInfoType;
+
+// Must be the same as CellInfo.TIMESTAMP_TYPE_XXX
+typedef enum {
+    RIL_TIMESTAMP_TYPE_UNKNOWN = 0,
+    RIL_TIMESTAMP_TYPE_ANTENNA = 1,
+    RIL_TIMESTAMP_TYPE_MODEM = 2,
+    RIL_TIMESTAMP_TYPE_OEM_RIL = 3,
+    RIL_TIMESTAMP_TYPE_JAVA_RIL = 4,
+} RIL_TimeStampType;
+
+typedef struct {
+  RIL_CellInfoType  cellInfoType;   /* cell type for selecting from union CellInfo */
+  int               registered;     /* !0 if this cell is registered 0 if not registered */
+  RIL_TimeStampType timeStampType;  /* type of time stamp represented by timeStamp */
+  uint64_t          timeStamp;      /* Time in nanos as returned by ril_nano_time */
+  union {
+    RIL_CellInfoGsm     gsm;
+    RIL_CellInfoCdma    cdma;
+    RIL_CellInfoLte     lte;
+    RIL_CellInfoWcdma   wcdma;
+    RIL_CellInfoTdscdma tdscdma;
+  } CellInfo;
+} RIL_CellInfo;
+
+/* Names of the CDMA info records (C.S0005 section 3.7.5) */
+typedef enum {
+  RIL_CDMA_DISPLAY_INFO_REC,
+  RIL_CDMA_CALLED_PARTY_NUMBER_INFO_REC,
+  RIL_CDMA_CALLING_PARTY_NUMBER_INFO_REC,
+  RIL_CDMA_CONNECTED_NUMBER_INFO_REC,
+  RIL_CDMA_SIGNAL_INFO_REC,
+  RIL_CDMA_REDIRECTING_NUMBER_INFO_REC,
+  RIL_CDMA_LINE_CONTROL_INFO_REC,
+  RIL_CDMA_EXTENDED_DISPLAY_INFO_REC,
+  RIL_CDMA_T53_CLIR_INFO_REC,
+  RIL_CDMA_T53_RELEASE_INFO_REC,
+  RIL_CDMA_T53_AUDIO_CONTROL_INFO_REC
+} RIL_CDMA_InfoRecName;
+
+/* Display Info Rec as defined in C.S0005 section 3.7.5.1
+   Extended Display Info Rec as defined in C.S0005 section 3.7.5.16
+   Note: the Extended Display info rec contains multiple records of the
+   form: display_tag, display_len, and display_len occurrences of the
+   chari field if the display_tag is not 10000000 or 10000001.
+   To save space, the records are stored consecutively in a byte buffer.
+   The display_tag, display_len and chari fields are all 1 byte.
+*/
+
+typedef struct {
+  char alpha_len;
+  char alpha_buf[CDMA_ALPHA_INFO_BUFFER_LENGTH];
+} RIL_CDMA_DisplayInfoRecord;
+
+/* Called Party Number Info Rec as defined in C.S0005 section 3.7.5.2
+   Calling Party Number Info Rec as defined in C.S0005 section 3.7.5.3
+   Connected Number Info Rec as defined in C.S0005 section 3.7.5.4
+*/
+
+typedef struct {
+  char len;
+  char buf[CDMA_NUMBER_INFO_BUFFER_LENGTH];
+  char number_type;
+  char number_plan;
+  char pi;
+  char si;
+} RIL_CDMA_NumberInfoRecord;
+
+/* Redirecting Number Information Record as defined in C.S0005 section 3.7.5.11 */
+typedef enum {
+  RIL_REDIRECTING_REASON_UNKNOWN = 0,
+  RIL_REDIRECTING_REASON_CALL_FORWARDING_BUSY = 1,
+  RIL_REDIRECTING_REASON_CALL_FORWARDING_NO_REPLY = 2,
+  RIL_REDIRECTING_REASON_CALLED_DTE_OUT_OF_ORDER = 9,
+  RIL_REDIRECTING_REASON_CALL_FORWARDING_BY_THE_CALLED_DTE = 10,
+  RIL_REDIRECTING_REASON_CALL_FORWARDING_UNCONDITIONAL = 15,
+  RIL_REDIRECTING_REASON_RESERVED
+} RIL_CDMA_RedirectingReason;
+
+typedef struct {
+  RIL_CDMA_NumberInfoRecord redirectingNumber;
+  /* redirectingReason is set to RIL_REDIRECTING_REASON_UNKNOWN if not included */
+  RIL_CDMA_RedirectingReason redirectingReason;
+} RIL_CDMA_RedirectingNumberInfoRecord;
+
+/* Line Control Information Record as defined in C.S0005 section 3.7.5.15 */
+typedef struct {
+  char lineCtrlPolarityIncluded;
+  char lineCtrlToggle;
+  char lineCtrlReverse;
+  char lineCtrlPowerDenial;
+} RIL_CDMA_LineControlInfoRecord;
+
+/* T53 CLIR Information Record */
+typedef struct {
+  char cause;
+} RIL_CDMA_T53_CLIRInfoRecord;
+
+/* T53 Audio Control Information Record */
+typedef struct {
+  char upLink;
+  char downLink;
+} RIL_CDMA_T53_AudioControlInfoRecord;
+
+typedef struct {
+
+  RIL_CDMA_InfoRecName name;
+
+  union {
+    /* Display and Extended Display Info Rec */
+    RIL_CDMA_DisplayInfoRecord           display;
+
+    /* Called Party Number, Calling Party Number, Connected Number Info Rec */
+    RIL_CDMA_NumberInfoRecord            number;
+
+    /* Signal Info Rec */
+    RIL_CDMA_SignalInfoRecord            signal;
+
+    /* Redirecting Number Info Rec */
+    RIL_CDMA_RedirectingNumberInfoRecord redir;
+
+    /* Line Control Info Rec */
+    RIL_CDMA_LineControlInfoRecord       lineCtrl;
+
+    /* T53 CLIR Info Rec */
+    RIL_CDMA_T53_CLIRInfoRecord          clir;
+
+    /* T53 Audio Control Info Rec */
+    RIL_CDMA_T53_AudioControlInfoRecord  audioCtrl;
+  } rec;
+} RIL_CDMA_InformationRecord;
+
+#define RIL_CDMA_MAX_NUMBER_OF_INFO_RECS 10
+
+typedef struct {
+  char numberOfInfoRecs;
+  RIL_CDMA_InformationRecord infoRec[RIL_CDMA_MAX_NUMBER_OF_INFO_RECS];
+} RIL_CDMA_InformationRecords;
+
+/* See RIL_REQUEST_NV_READ_ITEM */
+typedef struct {
+  RIL_NV_Item itemID;
+} RIL_NV_ReadItem;
+
+/* See RIL_REQUEST_NV_WRITE_ITEM */
+typedef struct {
+  RIL_NV_Item   itemID;
+  char *        value;
+} RIL_NV_WriteItem;
+
+typedef enum {
+    HANDOVER_STARTED = 0,
+    HANDOVER_COMPLETED = 1,
+    HANDOVER_FAILED = 2,
+    HANDOVER_CANCELED = 3
+} RIL_SrvccState;
+
+/* hardware configuration reported to RILJ. */
+typedef enum {
+   RIL_HARDWARE_CONFIG_MODEM = 0,
+   RIL_HARDWARE_CONFIG_SIM = 1,
+} RIL_HardwareConfig_Type;
+
+typedef enum {
+   RIL_HARDWARE_CONFIG_STATE_ENABLED = 0,
+   RIL_HARDWARE_CONFIG_STATE_STANDBY = 1,
+   RIL_HARDWARE_CONFIG_STATE_DISABLED = 2,
+} RIL_HardwareConfig_State;
+
+typedef struct {
+   int rilModel;
+   uint32_t rat; /* bitset - ref. RIL_RadioTechnology. */
+   int maxVoice;
+   int maxData;
+   int maxStandby;
+} RIL_HardwareConfig_Modem;
+
+typedef struct {
+   char modemUuid[MAX_UUID_LENGTH];
+} RIL_HardwareConfig_Sim;
+
+typedef struct {
+  RIL_HardwareConfig_Type type;
+  char uuid[MAX_UUID_LENGTH];
+  RIL_HardwareConfig_State state;
+  union {
+     RIL_HardwareConfig_Modem modem;
+     RIL_HardwareConfig_Sim sim;
+  } cfg;
+} RIL_HardwareConfig;
+
+typedef enum {
+  SS_CFU,
+  SS_CF_BUSY,
+  SS_CF_NO_REPLY,
+  SS_CF_NOT_REACHABLE,
+  SS_CF_ALL,
+  SS_CF_ALL_CONDITIONAL,
+  SS_CLIP,
+  SS_CLIR,
+  SS_COLP,
+  SS_COLR,
+  SS_WAIT,
+  SS_BAOC,
+  SS_BAOIC,
+  SS_BAOIC_EXC_HOME,
+  SS_BAIC,
+  SS_BAIC_ROAMING,
+  SS_ALL_BARRING,
+  SS_OUTGOING_BARRING,
+  SS_INCOMING_BARRING
+} RIL_SsServiceType;
+
+typedef enum {
+  SS_ACTIVATION,
+  SS_DEACTIVATION,
+  SS_INTERROGATION,
+  SS_REGISTRATION,
+  SS_ERASURE
+} RIL_SsRequestType;
+
+typedef enum {
+  SS_ALL_TELE_AND_BEARER_SERVICES,
+  SS_ALL_TELESEVICES,
+  SS_TELEPHONY,
+  SS_ALL_DATA_TELESERVICES,
+  SS_SMS_SERVICES,
+  SS_ALL_TELESERVICES_EXCEPT_SMS
+} RIL_SsTeleserviceType;
+
+#define SS_INFO_MAX 4
+#define NUM_SERVICE_CLASSES 7
+
+typedef struct {
+  int numValidIndexes; /* This gives the number of valid values in cfInfo.
+                       For example if voice is forwarded to one number and data
+                       is forwarded to a different one then numValidIndexes will be
+                       2 indicating total number of valid values in cfInfo.
+                       Similarly if all the services are forwarded to the same
+                       number then the value of numValidIndexes will be 1. */
+
+  RIL_CallForwardInfo cfInfo[NUM_SERVICE_CLASSES]; /* This is the response data
+                                                      for SS request to query call
+                                                      forward status. see
+                                                      RIL_REQUEST_QUERY_CALL_FORWARD_STATUS */
+} RIL_CfData;
+
+typedef struct {
+  RIL_SsServiceType serviceType;
+  RIL_SsRequestType requestType;
+  RIL_SsTeleserviceType teleserviceType;
+  int serviceClass;
+  RIL_Errno result;
+
+  union {
+    int ssInfo[SS_INFO_MAX]; /* This is the response data for most of the SS GET/SET
+                                RIL requests. E.g. RIL_REQUSET_GET_CLIR returns
+                                two ints, so first two values of ssInfo[] will be
+                                used for response if serviceType is SS_CLIR and
+                                requestType is SS_INTERROGATION */
+
+    RIL_CfData cfData;
+  };
+} RIL_StkCcUnsolSsResponse;
+
+/**
+ * Data connection power state
+ */
+typedef enum {
+    RIL_DC_POWER_STATE_LOW      = 1,        // Low power state
+    RIL_DC_POWER_STATE_MEDIUM   = 2,        // Medium power state
+    RIL_DC_POWER_STATE_HIGH     = 3,        // High power state
+    RIL_DC_POWER_STATE_UNKNOWN  = INT32_MAX // Unknown state
+} RIL_DcPowerStates;
+
+/**
+ * Data connection real time info
+ */
+typedef struct {
+    uint64_t                    time;       // Time in nanos as returned by ril_nano_time
+    RIL_DcPowerStates           powerState; // Current power state
+} RIL_DcRtInfo;
+
+/**
+ * Data profile to modem
+ */
+typedef struct {
+    /* id of the data profile */
+    int profileId;
+    /* the APN to connect to */
+    char* apn;
+    /** one of the PDP_type values in TS 27.007 section 10.1.1.
+     * For example, "IP", "IPV6", "IPV4V6", or "PPP".
+     */
+    char* protocol;
+    /** authentication protocol used for this PDP context
+     * (None: 0, PAP: 1, CHAP: 2, PAP&CHAP: 3)
+     */
+    int authType;
+    /* the username for APN, or NULL */
+    char* user;
+    /* the password for APN, or NULL */
+    char* password;
+    /* the profile type, TYPE_COMMON-0, TYPE_3GPP-1, TYPE_3GPP2-2 */
+    int type;
+    /* the period in seconds to limit the maximum connections */
+    int maxConnsTime;
+    /* the maximum connections during maxConnsTime */
+    int maxConns;
+    /** the required wait time in seconds after a successful UE initiated
+     * disconnect of a given PDN connection before the device can send
+     * a new PDN connection request for that given PDN
+     */
+    int waitTime;
+    /* true to enable the profile, 0 to disable, 1 to enable */
+    int enabled;
+} RIL_DataProfileInfo;
+
+/* Tx Power Levels */
+#define RIL_NUM_TX_POWER_LEVELS     5
+
+typedef struct {
+
+  /* period (in ms) when modem is power collapsed */
+  uint32_t sleep_mode_time_ms;
+
+  /* period (in ms) when modem is awake and in idle mode*/
+  uint32_t idle_mode_time_ms;
+
+  /* period (in ms) for which Tx is active */
+  uint32_t tx_mode_time_ms[RIL_NUM_TX_POWER_LEVELS];
+
+  /* period (in ms) for which Rx is active */
+  uint32_t rx_mode_time_ms;
+} RIL_ActivityStatsInfo;
+
+/**
+ * RIL_REQUEST_GET_SIM_STATUS
+ *
+ * Requests status of the SIM interface and the SIM card
+ *
+ * "data" is NULL
+ *
+ * "response" is const RIL_CardStatus_v6 *
+ *
+ * Valid errors:
+ *  Must never fail
+ */
+#define RIL_REQUEST_GET_SIM_STATUS 1
+
+/**
+ * RIL_REQUEST_ENTER_SIM_PIN
+ *
+ * Supplies SIM PIN. Only called if RIL_CardStatus has RIL_APPSTATE_PIN state
+ *
+ * "data" is const char **
+ * ((const char **)data)[0] is PIN value
+ * ((const char **)data)[1] is AID value, See ETSI 102.221 8.1 and 101.220 4, NULL if no value.
+ *
+ * "response" is int *
+ * ((int *)response)[0] is the number of retries remaining, or -1 if unknown
+ *
+ * Valid errors:
+ *
+ * SUCCESS
+ * RADIO_NOT_AVAILABLE (radio resetting)
+ * GENERIC_FAILURE
+ * PASSWORD_INCORRECT
+ */
+
+#define RIL_REQUEST_ENTER_SIM_PIN 2
+
+/**
+ * RIL_REQUEST_ENTER_SIM_PUK
+ *
+ * Supplies SIM PUK and new PIN.
+ *
+ * "data" is const char **
+ * ((const char **)data)[0] is PUK value
+ * ((const char **)data)[1] is new PIN value
+ * ((const char **)data)[2] is AID value, See ETSI 102.221 8.1 and 101.220 4, NULL if no value.
+ *
+ * "response" is int *
+ * ((int *)response)[0] is the number of retries remaining, or -1 if unknown
+ *
+ * Valid errors:
+ *
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE (radio resetting)
+ *  GENERIC_FAILURE
+ *  PASSWORD_INCORRECT
+ *     (PUK is invalid)
+ */
+
+#define RIL_REQUEST_ENTER_SIM_PUK 3
+
+/**
+ * RIL_REQUEST_ENTER_SIM_PIN2
+ *
+ * Supplies SIM PIN2. Only called following operation where SIM_PIN2 was
+ * returned as a a failure from a previous operation.
+ *
+ * "data" is const char **
+ * ((const char **)data)[0] is PIN2 value
+ * ((const char **)data)[1] is AID value, See ETSI 102.221 8.1 and 101.220 4, NULL if no value.
+ *
+ * "response" is int *
+ * ((int *)response)[0] is the number of retries remaining, or -1 if unknown
+ *
+ * Valid errors:
+ *
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE (radio resetting)
+ *  GENERIC_FAILURE
+ *  PASSWORD_INCORRECT
+ */
+
+#define RIL_REQUEST_ENTER_SIM_PIN2 4
+
+/**
+ * RIL_REQUEST_ENTER_SIM_PUK2
+ *
+ * Supplies SIM PUK2 and new PIN2.
+ *
+ * "data" is const char **
+ * ((const char **)data)[0] is PUK2 value
+ * ((const char **)data)[1] is new PIN2 value
+ * ((const char **)data)[2] is AID value, See ETSI 102.221 8.1 and 101.220 4, NULL if no value.
+ *
+ * "response" is int *
+ * ((int *)response)[0] is the number of retries remaining, or -1 if unknown
+ *
+ * Valid errors:
+ *
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE (radio resetting)
+ *  GENERIC_FAILURE
+ *  PASSWORD_INCORRECT
+ *     (PUK2 is invalid)
+ */
+
+#define RIL_REQUEST_ENTER_SIM_PUK2 5
+
+/**
+ * RIL_REQUEST_CHANGE_SIM_PIN
+ *
+ * Supplies old SIM PIN and new PIN.
+ *
+ * "data" is const char **
+ * ((const char **)data)[0] is old PIN value
+ * ((const char **)data)[1] is new PIN value
+ * ((const char **)data)[2] is AID value, See ETSI 102.221 8.1 and 101.220 4, NULL if no value.
+ *
+ * "response" is int *
+ * ((int *)response)[0] is the number of retries remaining, or -1 if unknown
+ *
+ * Valid errors:
+ *
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE (radio resetting)
+ *  GENERIC_FAILURE
+ *  PASSWORD_INCORRECT
+ *     (old PIN is invalid)
+ *
+ */
+
+#define RIL_REQUEST_CHANGE_SIM_PIN 6
+
+
+/**
+ * RIL_REQUEST_CHANGE_SIM_PIN2
+ *
+ * Supplies old SIM PIN2 and new PIN2.
+ *
+ * "data" is const char **
+ * ((const char **)data)[0] is old PIN2 value
+ * ((const char **)data)[1] is new PIN2 value
+ * ((const char **)data)[2] is AID value, See ETSI 102.221 8.1 and 101.220 4, NULL if no value.
+ *
+ * "response" is int *
+ * ((int *)response)[0] is the number of retries remaining, or -1 if unknown
+ *
+ * Valid errors:
+ *
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE (radio resetting)
+ *  GENERIC_FAILURE
+ *  PASSWORD_INCORRECT
+ *     (old PIN2 is invalid)
+ *
+ */
+
+#define RIL_REQUEST_CHANGE_SIM_PIN2 7
+
+/**
+ * RIL_REQUEST_ENTER_NETWORK_DEPERSONALIZATION
+ *
+ * Requests that network personlization be deactivated
+ *
+ * "data" is const char **
+ * ((const char **)(data))[0]] is network depersonlization code
+ *
+ * "response" is int *
+ * ((int *)response)[0] is the number of retries remaining, or -1 if unknown
+ *
+ * Valid errors:
+ *
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE (radio resetting)
+ *  GENERIC_FAILURE
+ *  PASSWORD_INCORRECT
+ *     (code is invalid)
+ */
+
+#define RIL_REQUEST_ENTER_NETWORK_DEPERSONALIZATION 8
+
+/**
+ * RIL_REQUEST_GET_CURRENT_CALLS
+ *
+ * Requests current call list
+ *
+ * "data" is NULL
+ *
+ * "response" must be a "const RIL_Call **"
+ *
+ * Valid errors:
+ *
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE (radio resetting)
+ *  GENERIC_FAILURE
+ *      (request will be made again in a few hundred msec)
+ */
+
+#define RIL_REQUEST_GET_CURRENT_CALLS 9
+
+
+/**
+ * RIL_REQUEST_DIAL
+ *
+ * Initiate voice call
+ *
+ * "data" is const RIL_Dial *
+ * "response" is NULL
+ *
+ * This method is never used for supplementary service codes
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE (radio resetting)
+ *  DIAL_MODIFIED_TO_USSD
+ *  DIAL_MODIFIED_TO_SS
+ *  DIAL_MODIFIED_TO_DIAL
+ *  GENERIC_FAILURE
+ */
+#define RIL_REQUEST_DIAL 10
+
+/**
+ * RIL_REQUEST_GET_IMSI
+ *
+ * Get the SIM IMSI
+ *
+ * Only valid when radio state is "RADIO_STATE_ON"
+ *
+ * "data" is const char **
+ * ((const char **)data)[0] is AID value, See ETSI 102.221 8.1 and 101.220 4, NULL if no value.
+ * "response" is a const char * containing the IMSI
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE (radio resetting)
+ *  GENERIC_FAILURE
+ */
+
+#define RIL_REQUEST_GET_IMSI 11
+
+/**
+ * RIL_REQUEST_HANGUP
+ *
+ * Hang up a specific line (like AT+CHLD=1x)
+ *
+ * After this HANGUP request returns, RIL should show the connection is NOT
+ * active anymore in next RIL_REQUEST_GET_CURRENT_CALLS query.
+ *
+ * "data" is an int *
+ * (int *)data)[0] contains Connection index (value of 'x' in CHLD above)
+ *
+ * "response" is NULL
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE (radio resetting)
+ *  GENERIC_FAILURE
+ */
+
+#define RIL_REQUEST_HANGUP 12
+
+/**
+ * RIL_REQUEST_HANGUP_WAITING_OR_BACKGROUND
+ *
+ * Hang up waiting or held (like AT+CHLD=0)
+ *
+ * After this HANGUP request returns, RIL should show the connection is NOT
+ * active anymore in next RIL_REQUEST_GET_CURRENT_CALLS query.
+ *
+ * "data" is NULL
+ * "response" is NULL
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE (radio resetting)
+ *  GENERIC_FAILURE
+ */
+
+#define RIL_REQUEST_HANGUP_WAITING_OR_BACKGROUND 13
+
+/**
+ * RIL_REQUEST_HANGUP_FOREGROUND_RESUME_BACKGROUND
+ *
+ * Hang up waiting or held (like AT+CHLD=1)
+ *
+ * After this HANGUP request returns, RIL should show the connection is NOT
+ * active anymore in next RIL_REQUEST_GET_CURRENT_CALLS query.
+ *
+ * "data" is NULL
+ * "response" is NULL
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE (radio resetting)
+ *  GENERIC_FAILURE
+ */
+
+#define RIL_REQUEST_HANGUP_FOREGROUND_RESUME_BACKGROUND 14
+
+/**
+ * RIL_REQUEST_SWITCH_WAITING_OR_HOLDING_AND_ACTIVE
+ *
+ * Switch waiting or holding call and active call (like AT+CHLD=2)
+ *
+ * State transitions should be is follows:
+ *
+ * If call 1 is waiting and call 2 is active, then if this re
+ *
+ *   BEFORE                               AFTER
+ * Call 1   Call 2                 Call 1       Call 2
+ * ACTIVE   HOLDING                HOLDING     ACTIVE
+ * ACTIVE   WAITING                HOLDING     ACTIVE
+ * HOLDING  WAITING                HOLDING     ACTIVE
+ * ACTIVE   IDLE                   HOLDING     IDLE
+ * IDLE     IDLE                   IDLE        IDLE
+ *
+ * "data" is NULL
+ * "response" is NULL
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE (radio resetting)
+ *  GENERIC_FAILURE
+ */
+
+#define RIL_REQUEST_SWITCH_WAITING_OR_HOLDING_AND_ACTIVE 15
+#define RIL_REQUEST_SWITCH_HOLDING_AND_ACTIVE 15
+
+/**
+ * RIL_REQUEST_CONFERENCE
+ *
+ * Conference holding and active (like AT+CHLD=3)
+
+ * "data" is NULL
+ * "response" is NULL
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE (radio resetting)
+ *  GENERIC_FAILURE
+ */
+#define RIL_REQUEST_CONFERENCE 16
+
+/**
+ * RIL_REQUEST_UDUB
+ *
+ * Send UDUB (user determined used busy) to ringing or
+ * waiting call answer)(RIL_BasicRequest r);
+ *
+ * "data" is NULL
+ * "response" is NULL
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE (radio resetting)
+ *  GENERIC_FAILURE
+ */
+#define RIL_REQUEST_UDUB 17
+
+/**
+ * RIL_REQUEST_LAST_CALL_FAIL_CAUSE
+ *
+ * Requests the failure cause code for the most recently terminated call
+ *
+ * "data" is NULL
+ * "response" is a "int *"
+ * ((int *)response)[0] is RIL_LastCallFailCause.  GSM failure reasons are
+ * mapped to cause codes defined in TS 24.008 Annex H where possible. CDMA
+ * failure reasons are derived from the possible call failure scenarios
+ * described in the "CDMA IS-2000 Release A (C.S0005-A v6.0)" standard.
+ *
+ * The implementation should return CALL_FAIL_ERROR_UNSPECIFIED for blocked
+ * MO calls by restricted state (See RIL_UNSOL_RESTRICTED_STATE_CHANGED)
+ *
+ * If the implementation does not have access to the exact cause codes,
+ * then it should return one of the values listed in RIL_LastCallFailCause,
+ * as the UI layer needs to distinguish these cases for tone generation or
+ * error notification.
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE
+ *  GENERIC_FAILURE
+ *
+ * See also: RIL_REQUEST_LAST_DATA_CALL_FAIL_CAUSE
+ */
+#define RIL_REQUEST_LAST_CALL_FAIL_CAUSE 18
+
+/**
+ * RIL_REQUEST_SIGNAL_STRENGTH
+ *
+ * Requests current signal strength and associated information
+ *
+ * Must succeed if radio is on.
+ *
+ * "data" is NULL
+ *
+ * "response" is a const RIL_SignalStrength *
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE
+ */
+#define RIL_REQUEST_SIGNAL_STRENGTH 19
+
+/**
+ * RIL_REQUEST_VOICE_REGISTRATION_STATE
+ *
+ * Request current registration state
+ *
+ * "data" is NULL
+ * "response" is a "char **"
+ * ((const char **)response)[0] is registration state 0-6,
+ *              0 - Not registered, MT is not currently searching
+ *                  a new operator to register
+ *              1 - Registered, home network
+ *              2 - Not registered, but MT is currently searching
+ *                  a new operator to register
+ *              3 - Registration denied
+ *              4 - Unknown
+ *              5 - Registered, roaming
+ *             10 - Same as 0, but indicates that emergency calls
+ *                  are enabled.
+ *             12 - Same as 2, but indicates that emergency calls
+ *                  are enabled.
+ *             13 - Same as 3, but indicates that emergency calls
+ *                  are enabled.
+ *             14 - Same as 4, but indicates that emergency calls
+ *                  are enabled.
+ *
+ * ((const char **)response)[1] is LAC if registered on a GSM/WCDMA system or
+ *                              NULL if not.Valid LAC are 0x0000 - 0xffff
+ * ((const char **)response)[2] is CID if registered on a * GSM/WCDMA or
+ *                              NULL if not.
+ *                                 Valid CID are 0x00000000 - 0xffffffff
+ *                                    In GSM, CID is Cell ID (see TS 27.007)
+ *                                            in 16 bits
+ *                                    In UMTS, CID is UMTS Cell Identity
+ *                                             (see TS 25.331) in 28 bits
+ * ((const char **)response)[3] indicates the available voice radio technology,
+ *                              valid values as defined by RIL_RadioTechnology.
+ * ((const char **)response)[4] is Base Station ID if registered on a CDMA
+ *                              system or NULL if not.  Base Station ID in
+ *                              decimal format
+ * ((const char **)response)[5] is Base Station latitude if registered on a
+ *                              CDMA system or NULL if not. Base Station
+ *                              latitude is a decimal number as specified in
+ *                              3GPP2 C.S0005-A v6.0. It is represented in
+ *                              units of 0.25 seconds and ranges from -1296000
+ *                              to 1296000, both values inclusive (corresponding
+ *                              to a range of -90 to +90 degrees).
+ * ((const char **)response)[6] is Base Station longitude if registered on a
+ *                              CDMA system or NULL if not. Base Station
+ *                              longitude is a decimal number as specified in
+ *                              3GPP2 C.S0005-A v6.0. It is represented in
+ *                              units of 0.25 seconds and ranges from -2592000
+ *                              to 2592000, both values inclusive (corresponding
+ *                              to a range of -180 to +180 degrees).
+ * ((const char **)response)[7] is concurrent services support indicator if
+ *                              registered on a CDMA system 0-1.
+ *                                   0 - Concurrent services not supported,
+ *                                   1 - Concurrent services supported
+ * ((const char **)response)[8] is System ID if registered on a CDMA system or
+ *                              NULL if not. Valid System ID are 0 - 32767
+ * ((const char **)response)[9] is Network ID if registered on a CDMA system or
+ *                              NULL if not. Valid System ID are 0 - 65535
+ * ((const char **)response)[10] is the TSB-58 Roaming Indicator if registered
+ *                               on a CDMA or EVDO system or NULL if not. Valid values
+ *                               are 0-255.
+ * ((const char **)response)[11] indicates whether the current system is in the
+ *                               PRL if registered on a CDMA or EVDO system or NULL if
+ *                               not. 0=not in the PRL, 1=in the PRL
+ * ((const char **)response)[12] is the default Roaming Indicator from the PRL,
+ *                               if registered on a CDMA or EVDO system or NULL if not.
+ *                               Valid values are 0-255.
+ * ((const char **)response)[13] if registration state is 3 (Registration
+ *                               denied) this is an enumerated reason why
+ *                               registration was denied.  See 3GPP TS 24.008,
+ *                               10.5.3.6 and Annex G.
+ *                                 0 - General
+ *                                 1 - Authentication Failure
+ *                                 2 - IMSI unknown in HLR
+ *                                 3 - Illegal MS
+ *                                 4 - Illegal ME
+ *                                 5 - PLMN not allowed
+ *                                 6 - Location area not allowed
+ *                                 7 - Roaming not allowed
+ *                                 8 - No Suitable Cells in this Location Area
+ *                                 9 - Network failure
+ *                                10 - Persistent location update reject
+ *                                11 - PLMN not allowed
+ *                                12 - Location area not allowed
+ *                                13 - Roaming not allowed in this Location Area
+ *                                15 - No Suitable Cells in this Location Area
+ *                                17 - Network Failure
+ *                                20 - MAC Failure
+ *                                21 - Sync Failure
+ *                                22 - Congestion
+ *                                23 - GSM Authentication unacceptable
+ *                                25 - Not Authorized for this CSG
+ *                                32 - Service option not supported
+ *                                33 - Requested service option not subscribed
+ *                                34 - Service option temporarily out of order
+ *                                38 - Call cannot be identified
+ *                                48-63 - Retry upon entry into a new cell
+ *                                95 - Semantically incorrect message
+ *                                96 - Invalid mandatory information
+ *                                97 - Message type non-existent or not implemented
+ *                                98 - Message not compatible with protocol state
+ *                                99 - Information element non-existent or not implemented
+ *                               100 - Conditional IE error
+ *                               101 - Message not compatible with protocol state
+ *                               111 - Protocol error, unspecified
+ * ((const char **)response)[14] is the Primary Scrambling Code of the current
+ *                               cell as described in TS 25.331, in hexadecimal
+ *                               format, or NULL if unknown or not registered
+ *                               to a UMTS network.
+ *
+ * Please note that registration state 4 ("unknown") is treated
+ * as "out of service" in the Android telephony system
+ *
+ * Registration state 3 can be returned if Location Update Reject
+ * (with cause 17 - Network Failure) is received repeatedly from the network,
+ * to facilitate "managed roaming"
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE
+ *  GENERIC_FAILURE
+ */
+#define RIL_REQUEST_VOICE_REGISTRATION_STATE 20
+
+/**
+ * RIL_REQUEST_DATA_REGISTRATION_STATE
+ *
+ * Request current DATA registration state
+ *
+ * "data" is NULL
+ * "response" is a "char **"
+ * ((const char **)response)[0] is registration state 0-5 from TS 27.007 10.1.20 AT+CGREG
+ * ((const char **)response)[1] is LAC if registered or NULL if not
+ * ((const char **)response)[2] is CID if registered or NULL if not
+ * ((const char **)response)[3] indicates the available data radio technology,
+ *                              valid values as defined by RIL_RadioTechnology.
+ * ((const char **)response)[4] if registration state is 3 (Registration
+ *                               denied) this is an enumerated reason why
+ *                               registration was denied.  See 3GPP TS 24.008,
+ *                               Annex G.6 "Additonal cause codes for GMM".
+ *      7 == GPRS services not allowed
+ *      8 == GPRS services and non-GPRS services not allowed
+ *      9 == MS identity cannot be derived by the network
+ *      10 == Implicitly detached
+ *      14 == GPRS services not allowed in this PLMN
+ *      16 == MSC temporarily not reachable
+ *      40 == No PDP context activated
+ * ((const char **)response)[5] The maximum number of simultaneous Data Calls that can be
+ *                              established using RIL_REQUEST_SETUP_DATA_CALL.
+ *
+ * The values at offsets 6..10 are optional LTE location information in decimal.
+ * If a value is unknown that value may be NULL. If all values are NULL,
+ * none need to be present.
+ *  ((const char **)response)[6] is TAC, a 16-bit Tracking Area Code.
+ *  ((const char **)response)[7] is CID, a 0-503 Physical Cell Identifier.
+ *  ((const char **)response)[8] is ECI, a 28-bit E-UTRAN Cell Identifier.
+ *  ((const char **)response)[9] is CSGID, a 27-bit Closed Subscriber Group Identity.
+ *  ((const char **)response)[10] is TADV, a 6-bit timing advance value.
+ *
+ * LAC and CID are in hexadecimal format.
+ * valid LAC are 0x0000 - 0xffff
+ * valid CID are 0x00000000 - 0x0fffffff
+ *
+ * Please note that registration state 4 ("unknown") is treated
+ * as "out of service" in the Android telephony system
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE
+ *  GENERIC_FAILURE
+ */
+#define RIL_REQUEST_DATA_REGISTRATION_STATE 21
+
+/**
+ * RIL_REQUEST_OPERATOR
+ *
+ * Request current operator ONS or EONS
+ *
+ * "data" is NULL
+ * "response" is a "const char **"
+ * ((const char **)response)[0] is long alpha ONS or EONS
+ *                                  or NULL if unregistered
+ *
+ * ((const char **)response)[1] is short alpha ONS or EONS
+ *                                  or NULL if unregistered
+ * ((const char **)response)[2] is 5 or 6 digit numeric code (MCC + MNC)
+ *                                  or NULL if unregistered
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE
+ *  GENERIC_FAILURE
+ */
+#define RIL_REQUEST_OPERATOR 22
+
+/**
+ * RIL_REQUEST_RADIO_POWER
+ *
+ * Toggle radio on and off (for "airplane" mode)
+ * If the radio is is turned off/on the radio modem subsystem
+ * is expected return to an initialized state. For instance,
+ * any voice and data calls will be terminated and all associated
+ * lists emptied.
+ *
+ * "data" is int *
+ * ((int *)data)[0] is > 0 for "Radio On"
+ * ((int *)data)[0] is == 0 for "Radio Off"
+ *
+ * "response" is NULL
+ *
+ * Turn radio on if "on" > 0
+ * Turn radio off if "on" == 0
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE
+ *  GENERIC_FAILURE
+ */
+#define RIL_REQUEST_RADIO_POWER 23
+
+/**
+ * RIL_REQUEST_DTMF
+ *
+ * Send a DTMF tone
+ *
+ * If the implementation is currently playing a tone requested via
+ * RIL_REQUEST_DTMF_START, that tone should be cancelled and the new tone
+ * should be played instead
+ *
+ * "data" is a char * containing a single character with one of 12 values: 0-9,*,#
+ * "response" is NULL
+ *
+ * FIXME should this block/mute microphone?
+ * How does this interact with local DTMF feedback?
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE
+ *  GENERIC_FAILURE
+ *
+ * See also: RIL_REQUEST_DTMF_STOP, RIL_REQUEST_DTMF_START
+ *
+ */
+#define RIL_REQUEST_DTMF 24
+
+/**
+ * RIL_REQUEST_SEND_SMS
+ *
+ * Send an SMS message
+ *
+ * "data" is const char **
+ * ((const char **)data)[0] is SMSC address in GSM BCD format prefixed
+ *      by a length byte (as expected by TS 27.005) or NULL for default SMSC
+ * ((const char **)data)[1] is SMS in PDU format as an ASCII hex string
+ *      less the SMSC address
+ *      TP-Layer-Length is be "strlen(((const char **)data)[1])/2"
+ *
+ * "response" is a const RIL_SMS_Response *
+ *
+ * Based on the return error, caller decides to resend if sending sms
+ * fails. SMS_SEND_FAIL_RETRY means retry (i.e. error cause is 332)
+ * and GENERIC_FAILURE means no retry (i.e. error cause is 500)
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE
+ *  SMS_SEND_FAIL_RETRY
+ *  FDN_CHECK_FAILURE
+ *  GENERIC_FAILURE
+ *
+ * FIXME how do we specify TP-Message-Reference if we need to resend?
+ */
+#define RIL_REQUEST_SEND_SMS 25
+
+
+/**
+ * RIL_REQUEST_SEND_SMS_EXPECT_MORE
+ *
+ * Send an SMS message. Identical to RIL_REQUEST_SEND_SMS,
+ * except that more messages are expected to be sent soon. If possible,
+ * keep SMS relay protocol link open (eg TS 27.005 AT+CMMS command)
+ *
+ * "data" is const char **
+ * ((const char **)data)[0] is SMSC address in GSM BCD format prefixed
+ *      by a length byte (as expected by TS 27.005) or NULL for default SMSC
+ * ((const char **)data)[1] is SMS in PDU format as an ASCII hex string
+ *      less the SMSC address
+ *      TP-Layer-Length is be "strlen(((const char **)data)[1])/2"
+ *
+ * "response" is a const RIL_SMS_Response *
+ *
+ * Based on the return error, caller decides to resend if sending sms
+ * fails. SMS_SEND_FAIL_RETRY means retry (i.e. error cause is 332)
+ * and GENERIC_FAILURE means no retry (i.e. error cause is 500)
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE
+ *  SMS_SEND_FAIL_RETRY
+ *  GENERIC_FAILURE
+ *
+ */
+#define RIL_REQUEST_SEND_SMS_EXPECT_MORE 26
+
+
+/**
+ * RIL_REQUEST_SETUP_DATA_CALL
+ *
+ * Setup a packet data connection. If RIL_Data_Call_Response_v6.status
+ * return success it is added to the list of data calls and a
+ * RIL_UNSOL_DATA_CALL_LIST_CHANGED is sent. The call remains in the
+ * list until RIL_REQUEST_DEACTIVATE_DATA_CALL is issued or the
+ * radio is powered off/on. This list is returned by RIL_REQUEST_DATA_CALL_LIST
+ * and RIL_UNSOL_DATA_CALL_LIST_CHANGED.
+ *
+ * The RIL is expected to:
+ *  - Create one data call context.
+ *  - Create and configure a dedicated interface for the context
+ *  - The interface must be point to point.
+ *  - The interface is configured with one or more addresses and
+ *    is capable of sending and receiving packets. The prefix length
+ *    of the addresses must be /32 for IPv4 and /128 for IPv6.
+ *  - Must NOT change the linux routing table.
+ *  - Support up to RIL_REQUEST_DATA_REGISTRATION_STATE response[5]
+ *    number of simultaneous data call contexts.
+ *
+ * "data" is a const char **
+ * ((const char **)data)[0] Radio technology to use: 0-CDMA, 1-GSM/UMTS, 2...
+ *                          for values above 2 this is RIL_RadioTechnology + 2.
+ * ((const char **)data)[1] is a RIL_DataProfile (support is optional)
+ * ((const char **)data)[2] is the APN to connect to if radio technology is GSM/UMTS. This APN will
+ *                          override the one in the profile. NULL indicates no APN overrride.
+ * ((const char **)data)[3] is the username for APN, or NULL
+ * ((const char **)data)[4] is the password for APN, or NULL
+ * ((const char **)data)[5] is the PAP / CHAP auth type. Values:
+ *                          0 => PAP and CHAP is never performed.
+ *                          1 => PAP may be performed; CHAP is never performed.
+ *                          2 => CHAP may be performed; PAP is never performed.
+ *                          3 => PAP / CHAP may be performed - baseband dependent.
+ * ((const char **)data)[6] is the connection type to request must be one of the
+ *                          PDP_type values in TS 27.007 section 10.1.1.
+ *                          For example, "IP", "IPV6", "IPV4V6", or "PPP".
+ * ((const char **)data)[7] Optional connection property parameters, format to be defined.
+ *
+ * "response" is a RIL_Data_Call_Response_v11
+ *
+ * FIXME may need way to configure QoS settings
+ *
+ * Valid errors:
+ *  SUCCESS should be returned on both success and failure of setup with
+ *  the RIL_Data_Call_Response_v6.status containing the actual status.
+ *  For all other errors the RIL_Data_Call_Resonse_v6 is ignored.
+ *
+ *  Other errors could include:
+ *    RADIO_NOT_AVAILABLE, GENERIC_FAILURE, OP_NOT_ALLOWED_BEFORE_REG_TO_NW,
+ *    OP_NOT_ALLOWED_DURING_VOICE_CALL and REQUEST_NOT_SUPPORTED.
+ *
+ * See also: RIL_REQUEST_DEACTIVATE_DATA_CALL
+ */
+#define RIL_REQUEST_SETUP_DATA_CALL 27
+
+
+/**
+ * RIL_REQUEST_SIM_IO
+ *
+ * Request SIM I/O operation.
+ * This is similar to the TS 27.007 "restricted SIM" operation
+ * where it assumes all of the EF selection will be done by the
+ * callee.
+ *
+ * "data" is a const RIL_SIM_IO_v6 *
+ * Please note that RIL_SIM_IO has a "PIN2" field which may be NULL,
+ * or may specify a PIN2 for operations that require a PIN2 (eg
+ * updating FDN records)
+ *
+ * "response" is a const RIL_SIM_IO_Response *
+ *
+ * Arguments and responses that are unused for certain
+ * values of "command" should be ignored or set to NULL
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE
+ *  GENERIC_FAILURE
+ *  SIM_PIN2
+ *  SIM_PUK2
+ */
+#define RIL_REQUEST_SIM_IO 28
+
+/**
+ * RIL_REQUEST_SEND_USSD
+ *
+ * Send a USSD message
+ *
+ * If a USSD session already exists, the message should be sent in the
+ * context of that session. Otherwise, a new session should be created.
+ *
+ * The network reply should be reported via RIL_UNSOL_ON_USSD
+ *
+ * Only one USSD session may exist at a time, and the session is assumed
+ * to exist until:
+ *   a) The android system invokes RIL_REQUEST_CANCEL_USSD
+ *   b) The implementation sends a RIL_UNSOL_ON_USSD with a type code
+ *      of "0" (USSD-Notify/no further action) or "2" (session terminated)
+ *
+ * "data" is a const char * containing the USSD request in UTF-8 format
+ * "response" is NULL
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE
+ *  FDN_CHECK_FAILURE
+ *  USSD_MODIFIED_TO_DIAL
+ *  USSD_MODIFIED_TO_SS
+ *  USSD_MODIFIED_TO_USSD
+ *  GENERIC_FAILURE
+ *
+ * See also: RIL_REQUEST_CANCEL_USSD, RIL_UNSOL_ON_USSD
+ */
+
+#define RIL_REQUEST_SEND_USSD 29
+
+/**
+ * RIL_REQUEST_CANCEL_USSD
+ *
+ * Cancel the current USSD session if one exists
+ *
+ * "data" is null
+ * "response" is NULL
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE
+ *  GENERIC_FAILURE
+ */
+
+#define RIL_REQUEST_CANCEL_USSD 30
+
+/**
+ * RIL_REQUEST_GET_CLIR
+ *
+ * Gets current CLIR status
+ * "data" is NULL
+ * "response" is int *
+ * ((int *)data)[0] is "n" parameter from TS 27.007 7.7
+ * ((int *)data)[1] is "m" parameter from TS 27.007 7.7
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE
+ *  SS_MODIFIED_TO_DIAL
+ *  SS_MODIFIED_TO_USSD
+ *  SS_MODIFIED_TO_SS
+ *  GENERIC_FAILURE
+ */
+#define RIL_REQUEST_GET_CLIR 31
+
+/**
+ * RIL_REQUEST_SET_CLIR
+ *
+ * "data" is int *
+ * ((int *)data)[0] is "n" parameter from TS 27.007 7.7
+ *
+ * "response" is NULL
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE
+ *  SS_MODIFIED_TO_DIAL
+ *  SS_MODIFIED_TO_USSD
+ *  SS_MODIFIED_TO_SS
+ *  GENERIC_FAILURE
+ */
+#define RIL_REQUEST_SET_CLIR 32
+
+/**
+ * RIL_REQUEST_QUERY_CALL_FORWARD_STATUS
+ *
+ * "data" is const RIL_CallForwardInfo *
+ *
+ * "response" is const RIL_CallForwardInfo **
+ * "response" points to an array of RIL_CallForwardInfo *'s, one for
+ * each distinct registered phone number.
+ *
+ * For example, if data is forwarded to +18005551212 and voice is forwarded
+ * to +18005559999, then two separate RIL_CallForwardInfo's should be returned
+ *
+ * If, however, both data and voice are forwarded to +18005551212, then
+ * a single RIL_CallForwardInfo can be returned with the service class
+ * set to "data + voice = 3")
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE
+ *  SS_MODIFIED_TO_DIAL
+ *  SS_MODIFIED_TO_USSD
+ *  SS_MODIFIED_TO_SS
+ *  GENERIC_FAILURE
+ */
+#define RIL_REQUEST_QUERY_CALL_FORWARD_STATUS 33
+
+
+/**
+ * RIL_REQUEST_SET_CALL_FORWARD
+ *
+ * Configure call forward rule
+ *
+ * "data" is const RIL_CallForwardInfo *
+ * "response" is NULL
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE
+ *  SS_MODIFIED_TO_DIAL
+ *  SS_MODIFIED_TO_USSD
+ *  SS_MODIFIED_TO_SS
+ *  GENERIC_FAILURE
+ */
+#define RIL_REQUEST_SET_CALL_FORWARD 34
+
+
+/**
+ * RIL_REQUEST_QUERY_CALL_WAITING
+ *
+ * Query current call waiting state
+ *
+ * "data" is const int *
+ * ((const int *)data)[0] is the TS 27.007 service class to query.
+ * "response" is a const int *
+ * ((const int *)response)[0] is 0 for "disabled" and 1 for "enabled"
+ *
+ * If ((const int *)response)[0] is = 1, then ((const int *)response)[1]
+ * must follow, with the TS 27.007 service class bit vector of services
+ * for which call waiting is enabled.
+ *
+ * For example, if ((const int *)response)[0]  is 1 and
+ * ((const int *)response)[1] is 3, then call waiting is enabled for data
+ * and voice and disabled for everything else
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE
+ *  SS_MODIFIED_TO_DIAL
+ *  SS_MODIFIED_TO_USSD
+ *  SS_MODIFIED_TO_SS
+ *  GENERIC_FAILURE
+ */
+#define RIL_REQUEST_QUERY_CALL_WAITING 35
+
+
+/**
+ * RIL_REQUEST_SET_CALL_WAITING
+ *
+ * Configure current call waiting state
+ *
+ * "data" is const int *
+ * ((const int *)data)[0] is 0 for "disabled" and 1 for "enabled"
+ * ((const int *)data)[1] is the TS 27.007 service class bit vector of
+ *                           services to modify
+ * "response" is NULL
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE
+ *  SS_MODIFIED_TO_DIAL
+ *  SS_MODIFIED_TO_USSD
+ *  SS_MODIFIED_TO_SS
+ *  GENERIC_FAILURE
+ */
+#define RIL_REQUEST_SET_CALL_WAITING 36
+
+/**
+ * RIL_REQUEST_SMS_ACKNOWLEDGE
+ *
+ * Acknowledge successful or failed receipt of SMS previously indicated
+ * via RIL_UNSOL_RESPONSE_NEW_SMS
+ *
+ * "data" is int *
+ * ((int *)data)[0] is 1 on successful receipt
+ *                  (basically, AT+CNMA=1 from TS 27.005
+ *                  is 0 on failed receipt
+ *                  (basically, AT+CNMA=2 from TS 27.005)
+ * ((int *)data)[1] if data[0] is 0, this contains the failure cause as defined
+ *                  in TS 23.040, 9.2.3.22. Currently only 0xD3 (memory
+ *                  capacity exceeded) and 0xFF (unspecified error) are
+ *                  reported.
+ *
+ * "response" is NULL
+ *
+ * FIXME would like request that specified RP-ACK/RP-ERROR PDU
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE
+ *  GENERIC_FAILURE
+ */
+#define RIL_REQUEST_SMS_ACKNOWLEDGE  37
+
+/**
+ * RIL_REQUEST_GET_IMEI - DEPRECATED
+ *
+ * Get the device IMEI, including check digit
+ *
+ * The request is DEPRECATED, use RIL_REQUEST_DEVICE_IDENTITY
+ * Valid when RadioState is not RADIO_STATE_UNAVAILABLE
+ *
+ * "data" is NULL
+ * "response" is a const char * containing the IMEI
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE (radio resetting)
+ *  GENERIC_FAILURE
+ */
+
+#define RIL_REQUEST_GET_IMEI 38
+
+/**
+ * RIL_REQUEST_GET_IMEISV - DEPRECATED
+ *
+ * Get the device IMEISV, which should be two decimal digits
+ *
+ * The request is DEPRECATED, use RIL_REQUEST_DEVICE_IDENTITY
+ * Valid when RadioState is not RADIO_STATE_UNAVAILABLE
+ *
+ * "data" is NULL
+ * "response" is a const char * containing the IMEISV
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE (radio resetting)
+ *  GENERIC_FAILURE
+ */
+
+#define RIL_REQUEST_GET_IMEISV 39
+
+
+/**
+ * RIL_REQUEST_ANSWER
+ *
+ * Answer incoming call
+ *
+ * Will not be called for WAITING calls.
+ * RIL_REQUEST_SWITCH_WAITING_OR_HOLDING_AND_ACTIVE will be used in this case
+ * instead
+ *
+ * "data" is NULL
+ * "response" is NULL
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE (radio resetting)
+ *  GENERIC_FAILURE
+ */
+
+#define RIL_REQUEST_ANSWER 40
+
+/**
+ * RIL_REQUEST_DEACTIVATE_DATA_CALL
+ *
+ * Deactivate packet data connection and remove from the
+ * data call list if SUCCESS is returned. Any other return
+ * values should also try to remove the call from the list,
+ * but that may not be possible. In any event a
+ * RIL_REQUEST_RADIO_POWER off/on must clear the list. An
+ * RIL_UNSOL_DATA_CALL_LIST_CHANGED is not expected to be
+ * issued because of an RIL_REQUEST_DEACTIVATE_DATA_CALL.
+ *
+ * "data" is const char **
+ * ((char**)data)[0] indicating CID
+ * ((char**)data)[1] indicating Disconnect Reason
+ *                   0 => No specific reason specified
+ *                   1 => Radio shutdown requested
+ *
+ * "response" is NULL
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE
+ *  GENERIC_FAILURE
+ *
+ * See also: RIL_REQUEST_SETUP_DATA_CALL
+ */
+#define RIL_REQUEST_DEACTIVATE_DATA_CALL 41
+
+/**
+ * RIL_REQUEST_QUERY_FACILITY_LOCK
+ *
+ * Query the status of a facility lock state
+ *
+ * "data" is const char **
+ * ((const char **)data)[0] is the facility string code from TS 27.007 7.4
+ *                      (eg "AO" for BAOC, "SC" for SIM lock)
+ * ((const char **)data)[1] is the password, or "" if not required
+ * ((const char **)data)[2] is the TS 27.007 service class bit vector of
+ *                           services to query
+ * ((const char **)data)[3] is AID value, See ETSI 102.221 8.1 and 101.220 4, NULL if no value.
+ *                            This is only applicable in the case of Fixed Dialing Numbers
+ *                            (FDN) requests.
+ *
+ * "response" is an int *
+ * ((const int *)response) 0 is the TS 27.007 service class bit vector of
+ *                           services for which the specified barring facility
+ *                           is active. "0" means "disabled for all"
+ *
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE
+ *  SS_MODIFIED_TO_DIAL
+ *  SS_MODIFIED_TO_USSD
+ *  SS_MODIFIED_TO_SS
+ *  GENERIC_FAILURE
+ *
+ */
+#define RIL_REQUEST_QUERY_FACILITY_LOCK 42
+
+/**
+ * RIL_REQUEST_SET_FACILITY_LOCK
+ *
+ * Enable/disable one facility lock
+ *
+ * "data" is const char **
+ *
+ * ((const char **)data)[0] = facility string code from TS 27.007 7.4
+ * (eg "AO" for BAOC)
+ * ((const char **)data)[1] = "0" for "unlock" and "1" for "lock"
+ * ((const char **)data)[2] = password
+ * ((const char **)data)[3] = string representation of decimal TS 27.007
+ *                            service class bit vector. Eg, the string
+ *                            "1" means "set this facility for voice services"
+ * ((const char **)data)[4] = AID value, See ETSI 102.221 8.1 and 101.220 4, NULL if no value.
+ *                            This is only applicable in the case of Fixed Dialing Numbers
+ *                            (FDN) requests.
+ *
+ * "response" is int *
+ * ((int *)response)[0] is the number of retries remaining, or -1 if unknown
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE
+ *  SS_MODIFIED_TO_DIAL
+ *  SS_MODIFIED_TO_USSD
+ *  SS_MODIFIED_TO_SS
+ *  GENERIC_FAILURE
+ *
+ */
+#define RIL_REQUEST_SET_FACILITY_LOCK 43
+
+/**
+ * RIL_REQUEST_CHANGE_BARRING_PASSWORD
+ *
+ * Change call barring facility password
+ *
+ * "data" is const char **
+ *
+ * ((const char **)data)[0] = facility string code from TS 27.007 7.4
+ * (eg "AO" for BAOC)
+ * ((const char **)data)[1] = old password
+ * ((const char **)data)[2] = new password
+ *
+ * "response" is NULL
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE
+ *  SS_MODIFIED_TO_DIAL
+ *  SS_MODIFIED_TO_USSD
+ *  SS_MODIFIED_TO_SS
+ *  GENERIC_FAILURE
+ *
+ */
+#define RIL_REQUEST_CHANGE_BARRING_PASSWORD 44
+
+/**
+ * RIL_REQUEST_QUERY_NETWORK_SELECTION_MODE
+ *
+ * Query current network selectin mode
+ *
+ * "data" is NULL
+ *
+ * "response" is int *
+ * ((const int *)response)[0] is
+ *     0 for automatic selection
+ *     1 for manual selection
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE
+ *  GENERIC_FAILURE
+ *
+ */
+#define RIL_REQUEST_QUERY_NETWORK_SELECTION_MODE 45
+
+/**
+ * RIL_REQUEST_SET_NETWORK_SELECTION_AUTOMATIC
+ *
+ * Specify that the network should be selected automatically
+ *
+ * "data" is NULL
+ * "response" is NULL
+ *
+ * This request must not respond until the new operator is selected
+ * and registered
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE
+ *  ILLEGAL_SIM_OR_ME
+ *  GENERIC_FAILURE
+ *
+ * Note: Returns ILLEGAL_SIM_OR_ME when the failure is permanent and
+ *       no retries needed, such as illegal SIM or ME.
+ *       Returns GENERIC_FAILURE for all other causes that might be
+ *       fixed by retries.
+ *
+ */
+#define RIL_REQUEST_SET_NETWORK_SELECTION_AUTOMATIC 46
+
+/**
+ * RIL_REQUEST_SET_NETWORK_SELECTION_MANUAL
+ *
+ * Manually select a specified network.
+ *
+ * "data" is const char * specifying MCCMNC of network to select (eg "310170")
+ * "response" is NULL
+ *
+ * This request must not respond until the new operator is selected
+ * and registered
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE
+ *  ILLEGAL_SIM_OR_ME
+ *  GENERIC_FAILURE
+ *
+ * Note: Returns ILLEGAL_SIM_OR_ME when the failure is permanent and
+ *       no retries needed, such as illegal SIM or ME.
+ *       Returns GENERIC_FAILURE for all other causes that might be
+ *       fixed by retries.
+ *
+ */
+#define RIL_REQUEST_SET_NETWORK_SELECTION_MANUAL 47
+
+/**
+ * RIL_REQUEST_QUERY_AVAILABLE_NETWORKS
+ *
+ * Scans for available networks
+ *
+ * "data" is NULL
+ * "response" is const char ** that should be an array of n*4 strings, where
+ *    n is the number of available networks
+ * For each available network:
+ *
+ * ((const char **)response)[n+0] is long alpha ONS or EONS
+ * ((const char **)response)[n+1] is short alpha ONS or EONS
+ * ((const char **)response)[n+2] is 5 or 6 digit numeric code (MCC + MNC)
+ * ((const char **)response)[n+3] is a string value of the status:
+ *           "unknown"
+ *           "available"
+ *           "current"
+ *           "forbidden"
+ *
+ * This request must not respond until the new operator is selected
+ * and registered
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE
+ *  GENERIC_FAILURE
+ *
+ */
+#define RIL_REQUEST_QUERY_AVAILABLE_NETWORKS 48
+
+/**
+ * RIL_REQUEST_DTMF_START
+ *
+ * Start playing a DTMF tone. Continue playing DTMF tone until
+ * RIL_REQUEST_DTMF_STOP is received
+ *
+ * If a RIL_REQUEST_DTMF_START is received while a tone is currently playing,
+ * it should cancel the previous tone and play the new one.
+ *
+ * "data" is a char *
+ * ((char *)data)[0] is a single character with one of 12 values: 0-9,*,#
+ * "response" is NULL
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE
+ *  GENERIC_FAILURE
+ *
+ * See also: RIL_REQUEST_DTMF, RIL_REQUEST_DTMF_STOP
+ */
+#define RIL_REQUEST_DTMF_START 49
+
+/**
+ * RIL_REQUEST_DTMF_STOP
+ *
+ * Stop playing a currently playing DTMF tone.
+ *
+ * "data" is NULL
+ * "response" is NULL
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE
+ *  GENERIC_FAILURE
+ *
+ * See also: RIL_REQUEST_DTMF, RIL_REQUEST_DTMF_START
+ */
+#define RIL_REQUEST_DTMF_STOP 50
+
+/**
+ * RIL_REQUEST_BASEBAND_VERSION
+ *
+ * Return string value indicating baseband version, eg
+ * response from AT+CGMR
+ *
+ * "data" is NULL
+ * "response" is const char * containing version string for log reporting
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE
+ *  GENERIC_FAILURE
+ *
+ */
+#define RIL_REQUEST_BASEBAND_VERSION 51
+
+/**
+ * RIL_REQUEST_SEPARATE_CONNECTION
+ *
+ * Separate a party from a multiparty call placing the multiparty call
+ * (less the specified party) on hold and leaving the specified party
+ * as the only other member of the current (active) call
+ *
+ * Like AT+CHLD=2x
+ *
+ * See TS 22.084 1.3.8.2 (iii)
+ * TS 22.030 6.5.5 "Entering "2X followed by send"
+ * TS 27.007 "AT+CHLD=2x"
+ *
+ * "data" is an int *
+ * (int *)data)[0] contains Connection index (value of 'x' in CHLD above) "response" is NULL
+ *
+ * "response" is NULL
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE (radio resetting)
+ *  GENERIC_FAILURE
+ */
+#define RIL_REQUEST_SEPARATE_CONNECTION 52
+
+
+/**
+ * RIL_REQUEST_SET_MUTE
+ *
+ * Turn on or off uplink (microphone) mute.
+ *
+ * Will only be sent while voice call is active.
+ * Will always be reset to "disable mute" when a new voice call is initiated
+ *
+ * "data" is an int *
+ * (int *)data)[0] is 1 for "enable mute" and 0 for "disable mute"
+ *
+ * "response" is NULL
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE (radio resetting)
+ *  GENERIC_FAILURE
+ */
+
+#define RIL_REQUEST_SET_MUTE 53
+
+/**
+ * RIL_REQUEST_GET_MUTE
+ *
+ * Queries the current state of the uplink mute setting
+ *
+ * "data" is NULL
+ * "response" is an int *
+ * (int *)response)[0] is 1 for "mute enabled" and 0 for "mute disabled"
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE (radio resetting)
+ *  SS_MODIFIED_TO_DIAL
+ *  SS_MODIFIED_TO_USSD
+ *  SS_MODIFIED_TO_SS
+ *  GENERIC_FAILURE
+ */
+
+#define RIL_REQUEST_GET_MUTE 54
+
+/**
+ * RIL_REQUEST_QUERY_CLIP
+ *
+ * Queries the status of the CLIP supplementary service
+ *
+ * (for MMI code "*#30#")
+ *
+ * "data" is NULL
+ * "response" is an int *
+ * (int *)response)[0] is 1 for "CLIP provisioned"
+ *                           and 0 for "CLIP not provisioned"
+ *                           and 2 for "unknown, e.g. no network etc"
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE (radio resetting)
+ *  GENERIC_FAILURE
+ */
+
+#define RIL_REQUEST_QUERY_CLIP 55
+
+/**
+ * RIL_REQUEST_LAST_DATA_CALL_FAIL_CAUSE - Deprecated use the status
+ * field in RIL_Data_Call_Response_v6.
+ *
+ * Requests the failure cause code for the most recently failed PDP
+ * context or CDMA data connection active
+ * replaces RIL_REQUEST_LAST_PDP_FAIL_CAUSE
+ *
+ * "data" is NULL
+ *
+ * "response" is a "int *"
+ * ((int *)response)[0] is an integer cause code defined in TS 24.008
+ *   section 6.1.3.1.3 or close approximation
+ *
+ * If the implementation does not have access to the exact cause codes,
+ * then it should return one of the values listed in
+ * RIL_DataCallFailCause, as the UI layer needs to distinguish these
+ * cases for error notification
+ * and potential retries.
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE
+ *  GENERIC_FAILURE
+ *
+ * See also: RIL_REQUEST_LAST_CALL_FAIL_CAUSE
+ *
+ * Deprecated use the status field in RIL_Data_Call_Response_v6.
+ */
+
+#define RIL_REQUEST_LAST_DATA_CALL_FAIL_CAUSE 56
+
+/**
+ * RIL_REQUEST_DATA_CALL_LIST
+ *
+ * Returns the data call list. An entry is added when a
+ * RIL_REQUEST_SETUP_DATA_CALL is issued and removed on a
+ * RIL_REQUEST_DEACTIVATE_DATA_CALL. The list is emptied
+ * when RIL_REQUEST_RADIO_POWER off/on is issued.
+ *
+ * "data" is NULL
+ * "response" is an array of RIL_Data_Call_Response_v6
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE (radio resetting)
+ *  GENERIC_FAILURE
+ *
+ * See also: RIL_UNSOL_DATA_CALL_LIST_CHANGED
+ */
+
+#define RIL_REQUEST_DATA_CALL_LIST 57
+
+/**
+ * RIL_REQUEST_RESET_RADIO - DEPRECATED
+ *
+ * Request a radio reset. The RIL implementation may postpone
+ * the reset until after this request is responded to if the baseband
+ * is presently busy.
+ *
+ * The request is DEPRECATED, use RIL_REQUEST_RADIO_POWER
+ *
+ * "data" is NULL
+ * "response" is NULL
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE (radio resetting)
+ *  GENERIC_FAILURE
+ *  REQUEST_NOT_SUPPORTED
+ */
+
+#define RIL_REQUEST_RESET_RADIO 58
+
+/**
+ * RIL_REQUEST_OEM_HOOK_RAW
+ *
+ * This request reserved for OEM-specific uses. It passes raw byte arrays
+ * back and forth.
+ *
+ * It can be invoked on the Java side from
+ * com.android.internal.telephony.Phone.invokeOemRilRequestRaw()
+ *
+ * "data" is a char * of bytes copied from the byte[] data argument in java
+ * "response" is a char * of bytes that will returned via the
+ * caller's "response" Message here:
+ * (byte[])(((AsyncResult)response.obj).result)
+ *
+ * An error response here will result in
+ * (((AsyncResult)response.obj).result) == null and
+ * (((AsyncResult)response.obj).exception) being an instance of
+ * com.android.internal.telephony.gsm.CommandException
+ *
+ * Valid errors:
+ *  All
+ */
+
+#define RIL_REQUEST_OEM_HOOK_RAW 59
+
+/**
+ * RIL_REQUEST_OEM_HOOK_STRINGS
+ *
+ * This request reserved for OEM-specific uses. It passes strings
+ * back and forth.
+ *
+ * It can be invoked on the Java side from
+ * com.android.internal.telephony.Phone.invokeOemRilRequestStrings()
+ *
+ * "data" is a const char **, representing an array of null-terminated UTF-8
+ * strings copied from the "String[] strings" argument to
+ * invokeOemRilRequestStrings()
+ *
+ * "response" is a const char **, representing an array of null-terminated UTF-8
+ * stings that will be returned via the caller's response message here:
+ *
+ * (String[])(((AsyncResult)response.obj).result)
+ *
+ * An error response here will result in
+ * (((AsyncResult)response.obj).result) == null and
+ * (((AsyncResult)response.obj).exception) being an instance of
+ * com.android.internal.telephony.gsm.CommandException
+ *
+ * Valid errors:
+ *  All
+ */
+
+#define RIL_REQUEST_OEM_HOOK_STRINGS 60
+
+/**
+ * RIL_REQUEST_SCREEN_STATE
+ *
+ * Indicates the current state of the screen.  When the screen is off, the
+ * RIL should notify the baseband to suppress certain notifications (eg,
+ * signal strength and changes in LAC/CID or BID/SID/NID/latitude/longitude)
+ * in an effort to conserve power.  These notifications should resume when the
+ * screen is on.
+ *
+ * "data" is int *
+ * ((int *)data)[0] is == 1 for "Screen On"
+ * ((int *)data)[0] is == 0 for "Screen Off"
+ *
+ * "response" is NULL
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  GENERIC_FAILURE
+ */
+#define RIL_REQUEST_SCREEN_STATE 61
+
+
+/**
+ * RIL_REQUEST_SET_SUPP_SVC_NOTIFICATION
+ *
+ * Enables/disables supplementary service related notifications
+ * from the network.
+ *
+ * Notifications are reported via RIL_UNSOL_SUPP_SVC_NOTIFICATION.
+ *
+ * "data" is int *
+ * ((int *)data)[0] is == 1 for notifications enabled
+ * ((int *)data)[0] is == 0 for notifications disabled
+ *
+ * "response" is NULL
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE
+ *  GENERIC_FAILURE
+ *
+ * See also: RIL_UNSOL_SUPP_SVC_NOTIFICATION.
+ */
+#define RIL_REQUEST_SET_SUPP_SVC_NOTIFICATION 62
+
+/**
+ * RIL_REQUEST_WRITE_SMS_TO_SIM
+ *
+ * Stores a SMS message to SIM memory.
+ *
+ * "data" is RIL_SMS_WriteArgs *
+ *
+ * "response" is int *
+ * ((const int *)response)[0] is the record index where the message is stored.
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  GENERIC_FAILURE
+ *
+ */
+#define RIL_REQUEST_WRITE_SMS_TO_SIM 63
+
+/**
+ * RIL_REQUEST_DELETE_SMS_ON_SIM
+ *
+ * Deletes a SMS message from SIM memory.
+ *
+ * "data" is int  *
+ * ((int *)data)[0] is the record index of the message to delete.
+ *
+ * "response" is NULL
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  GENERIC_FAILURE
+ *
+ */
+#define RIL_REQUEST_DELETE_SMS_ON_SIM 64
+
+/**
+ * RIL_REQUEST_SET_BAND_MODE
+ *
+ * Assign a specified band for RF configuration.
+ *
+ * "data" is int *
+ * ((int *)data)[0] is == 0 for "unspecified" (selected by baseband automatically)
+ * ((int *)data)[0] is == 1 for "EURO band" (GSM-900 / DCS-1800 / WCDMA-IMT-2000)
+ * ((int *)data)[0] is == 2 for "US band" (GSM-850 / PCS-1900 / WCDMA-850 / WCDMA-PCS-1900)
+ * ((int *)data)[0] is == 3 for "JPN band" (WCDMA-800 / WCDMA-IMT-2000)
+ * ((int *)data)[0] is == 4 for "AUS band" (GSM-900 / DCS-1800 / WCDMA-850 / WCDMA-IMT-2000)
+ * ((int *)data)[0] is == 5 for "AUS band 2" (GSM-900 / DCS-1800 / WCDMA-850)
+ * ((int *)data)[0] is == 6 for "Cellular (800-MHz Band)"
+ * ((int *)data)[0] is == 7 for "PCS (1900-MHz Band)"
+ * ((int *)data)[0] is == 8 for "Band Class 3 (JTACS Band)"
+ * ((int *)data)[0] is == 9 for "Band Class 4 (Korean PCS Band)"
+ * ((int *)data)[0] is == 10 for "Band Class 5 (450-MHz Band)"
+ * ((int *)data)[0] is == 11 for "Band Class 6 (2-GMHz IMT2000 Band)"
+ * ((int *)data)[0] is == 12 for "Band Class 7 (Upper 700-MHz Band)"
+ * ((int *)data)[0] is == 13 for "Band Class 8 (1800-MHz Band)"
+ * ((int *)data)[0] is == 14 for "Band Class 9 (900-MHz Band)"
+ * ((int *)data)[0] is == 15 for "Band Class 10 (Secondary 800-MHz Band)"
+ * ((int *)data)[0] is == 16 for "Band Class 11 (400-MHz European PAMR Band)"
+ * ((int *)data)[0] is == 17 for "Band Class 15 (AWS Band)"
+ * ((int *)data)[0] is == 18 for "Band Class 16 (US 2.5-GHz Band)"
+ *
+ * "response" is NULL
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE
+ *  GENERIC_FAILURE
+ */
+#define RIL_REQUEST_SET_BAND_MODE 65
+
+/**
+ * RIL_REQUEST_QUERY_AVAILABLE_BAND_MODE
+ *
+ * Query the list of band mode supported by RF.
+ *
+ * "data" is NULL
+ *
+ * "response" is int *
+ * "response" points to an array of int's, the int[0] is the size of array, reset is one for
+ * each available band mode.
+ *
+ *  0 for "unspecified" (selected by baseband automatically)
+ *  1 for "EURO band" (GSM-900 / DCS-1800 / WCDMA-IMT-2000)
+ *  2 for "US band" (GSM-850 / PCS-1900 / WCDMA-850 / WCDMA-PCS-1900)
+ *  3 for "JPN band" (WCDMA-800 / WCDMA-IMT-2000)
+ *  4 for "AUS band" (GSM-900 / DCS-1800 / WCDMA-850 / WCDMA-IMT-2000)
+ *  5 for "AUS band 2" (GSM-900 / DCS-1800 / WCDMA-850)
+ *  6 for "Cellular (800-MHz Band)"
+ *  7 for "PCS (1900-MHz Band)"
+ *  8 for "Band Class 3 (JTACS Band)"
+ *  9 for "Band Class 4 (Korean PCS Band)"
+ *  10 for "Band Class 5 (450-MHz Band)"
+ *  11 for "Band Class 6 (2-GMHz IMT2000 Band)"
+ *  12 for "Band Class 7 (Upper 700-MHz Band)"
+ *  13 for "Band Class 8 (1800-MHz Band)"
+ *  14 for "Band Class 9 (900-MHz Band)"
+ *  15 for "Band Class 10 (Secondary 800-MHz Band)"
+ *  16 for "Band Class 11 (400-MHz European PAMR Band)"
+ *  17 for "Band Class 15 (AWS Band)"
+ *  18 for "Band Class 16 (US 2.5-GHz Band)"
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE
+ *  GENERIC_FAILURE
+ *
+ * See also: RIL_REQUEST_SET_BAND_MODE
+ */
+#define RIL_REQUEST_QUERY_AVAILABLE_BAND_MODE 66
+
+/**
+ * RIL_REQUEST_STK_GET_PROFILE
+ *
+ * Requests the profile of SIM tool kit.
+ * The profile indicates the SAT/USAT features supported by ME.
+ * The SAT/USAT features refer to 3GPP TS 11.14 and 3GPP TS 31.111
+ *
+ * "data" is NULL
+ *
+ * "response" is a const char * containing SAT/USAT profile
+ * in hexadecimal format string starting with first byte of terminal profile
+ *
+ * Valid errors:
+ *  RIL_E_SUCCESS
+ *  RIL_E_RADIO_NOT_AVAILABLE (radio resetting)
+ *  RIL_E_GENERIC_FAILURE
+ */
+#define RIL_REQUEST_STK_GET_PROFILE 67
+
+/**
+ * RIL_REQUEST_STK_SET_PROFILE
+ *
+ * Download the STK terminal profile as part of SIM initialization
+ * procedure
+ *
+ * "data" is a const char * containing SAT/USAT profile
+ * in hexadecimal format string starting with first byte of terminal profile
+ *
+ * "response" is NULL
+ *
+ * Valid errors:
+ *  RIL_E_SUCCESS
+ *  RIL_E_RADIO_NOT_AVAILABLE (radio resetting)
+ *  RIL_E_GENERIC_FAILURE
+ */
+#define RIL_REQUEST_STK_SET_PROFILE 68
+
+/**
+ * RIL_REQUEST_STK_SEND_ENVELOPE_COMMAND
+ *
+ * Requests to send a SAT/USAT envelope command to SIM.
+ * The SAT/USAT envelope command refers to 3GPP TS 11.14 and 3GPP TS 31.111
+ *
+ * "data" is a const char * containing SAT/USAT command
+ * in hexadecimal format string starting with command tag
+ *
+ * "response" is a const char * containing SAT/USAT response
+ * in hexadecimal format string starting with first byte of response
+ * (May be NULL)
+ *
+ * Valid errors:
+ *  RIL_E_SUCCESS
+ *  RIL_E_RADIO_NOT_AVAILABLE (radio resetting)
+ *  RIL_E_GENERIC_FAILURE
+ */
+#define RIL_REQUEST_STK_SEND_ENVELOPE_COMMAND 69
+
+/**
+ * RIL_REQUEST_STK_SEND_TERMINAL_RESPONSE
+ *
+ * Requests to send a terminal response to SIM for a received
+ * proactive command
+ *
+ * "data" is a const char * containing SAT/USAT response
+ * in hexadecimal format string starting with first byte of response data
+ *
+ * "response" is NULL
+ *
+ * Valid errors:
+ *  RIL_E_SUCCESS
+ *  RIL_E_RADIO_NOT_AVAILABLE (radio resetting)
+ *  RIL_E_GENERIC_FAILURE
+ */
+#define RIL_REQUEST_STK_SEND_TERMINAL_RESPONSE 70
+
+/**
+ * RIL_REQUEST_STK_HANDLE_CALL_SETUP_REQUESTED_FROM_SIM
+ *
+ * When STK application gets RIL_UNSOL_STK_CALL_SETUP, the call actually has
+ * been initialized by ME already. (We could see the call has been in the 'call
+ * list') So, STK application needs to accept/reject the call according as user
+ * operations.
+ *
+ * "data" is int *
+ * ((int *)data)[0] is > 0 for "accept" the call setup
+ * ((int *)data)[0] is == 0 for "reject" the call setup
+ *
+ * "response" is NULL
+ *
+ * Valid errors:
+ *  RIL_E_SUCCESS
+ *  RIL_E_RADIO_NOT_AVAILABLE (radio resetting)
+ *  RIL_E_GENERIC_FAILURE
+ */
+#define RIL_REQUEST_STK_HANDLE_CALL_SETUP_REQUESTED_FROM_SIM 71
+
+/**
+ * RIL_REQUEST_EXPLICIT_CALL_TRANSFER
+ *
+ * Connects the two calls and disconnects the subscriber from both calls.
+ *
+ * "data" is NULL
+ * "response" is NULL
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE (radio resetting)
+ *  GENERIC_FAILURE
+ */
+#define RIL_REQUEST_EXPLICIT_CALL_TRANSFER 72
+
+/**
+ * RIL_REQUEST_SET_PREFERRED_NETWORK_TYPE
+ *
+ * Requests to set the preferred network type for searching and registering
+ * (CS/PS domain, RAT, and operation mode)
+ *
+ * "data" is int * which is RIL_PreferredNetworkType
+ *
+ * "response" is NULL
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE (radio resetting)
+ *  GENERIC_FAILURE
+ *  MODE_NOT_SUPPORTED
+ */
+#define RIL_REQUEST_SET_PREFERRED_NETWORK_TYPE 73
+
+/**
+ * RIL_REQUEST_GET_PREFERRED_NETWORK_TYPE
+ *
+ * Query the preferred network type (CS/PS domain, RAT, and operation mode)
+ * for searching and registering
+ *
+ * "data" is NULL
+ *
+ * "response" is int *
+ * ((int *)reponse)[0] is == RIL_PreferredNetworkType
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE
+ *  GENERIC_FAILURE
+ *
+ * See also: RIL_REQUEST_SET_PREFERRED_NETWORK_TYPE
+ */
+#define RIL_REQUEST_GET_PREFERRED_NETWORK_TYPE 74
+
+/**
+ * RIL_REQUEST_NEIGHBORING_CELL_IDS
+ *
+ * Request neighboring cell id in GSM network
+ *
+ * "data" is NULL
+ * "response" must be a " const RIL_NeighboringCell** "
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE
+ *  GENERIC_FAILURE
+ */
+#define RIL_REQUEST_GET_NEIGHBORING_CELL_IDS 75
+
+/**
+ * RIL_REQUEST_SET_LOCATION_UPDATES
+ *
+ * Enables/disables network state change notifications due to changes in
+ * LAC and/or CID (for GSM) or BID/SID/NID/latitude/longitude (for CDMA).
+ * Basically +CREG=2 vs. +CREG=1 (TS 27.007).
+ *
+ * Note:  The RIL implementation should default to "updates enabled"
+ * when the screen is on and "updates disabled" when the screen is off.
+ *
+ * "data" is int *
+ * ((int *)data)[0] is == 1 for updates enabled (+CREG=2)
+ * ((int *)data)[0] is == 0 for updates disabled (+CREG=1)
+ *
+ * "response" is NULL
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE
+ *  GENERIC_FAILURE
+ *
+ * See also: RIL_REQUEST_SCREEN_STATE, RIL_UNSOL_RESPONSE_NETWORK_STATE_CHANGED
+ */
+#define RIL_REQUEST_SET_LOCATION_UPDATES 76
+
+/**
+ * RIL_REQUEST_CDMA_SET_SUBSCRIPTION_SOURCE
+ *
+ * Request to set the location where the CDMA subscription shall
+ * be retrieved
+ *
+ * "data" is int *
+ * ((int *)data)[0] is == RIL_CdmaSubscriptionSource
+ *
+ * "response" is NULL
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE
+ *  GENERIC_FAILURE
+ *  SIM_ABSENT
+ *  SUBSCRIPTION_NOT_AVAILABLE
+ *
+ * See also: RIL_REQUEST_CDMA_GET_SUBSCRIPTION_SOURCE
+ */
+#define RIL_REQUEST_CDMA_SET_SUBSCRIPTION_SOURCE 77
+
+/**
+ * RIL_REQUEST_CDMA_SET_ROAMING_PREFERENCE
+ *
+ * Request to set the roaming preferences in CDMA
+ *
+ * "data" is int *
+ * ((int *)data)[0] is == 0 for Home Networks only, as defined in PRL
+ * ((int *)data)[0] is == 1 for Roaming on Affiliated networks, as defined in PRL
+ * ((int *)data)[0] is == 2 for Roaming on Any Network, as defined in the PRL
+ *
+ * "response" is NULL
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE
+ *  GENERIC_FAILURE
+ */
+#define RIL_REQUEST_CDMA_SET_ROAMING_PREFERENCE 78
+
+/**
+ * RIL_REQUEST_CDMA_QUERY_ROAMING_PREFERENCE
+ *
+ * Request the actual setting of the roaming preferences in CDMA in the modem
+ *
+ * "data" is NULL
+ *
+ * "response" is int *
+ * ((int *)response)[0] is == 0 for Home Networks only, as defined in PRL
+ * ((int *)response)[0] is == 1 for Roaming on Affiliated networks, as defined in PRL
+ * ((int *)response)[0] is == 2 for Roaming on Any Network, as defined in the PRL
+ *
+ * "response" is NULL
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE
+ *  GENERIC_FAILURE
+ */
+#define RIL_REQUEST_CDMA_QUERY_ROAMING_PREFERENCE 79
+
+/**
+ * RIL_REQUEST_SET_TTY_MODE
+ *
+ * Request to set the TTY mode
+ *
+ * "data" is int *
+ * ((int *)data)[0] is == 0 for TTY off
+ * ((int *)data)[0] is == 1 for TTY Full
+ * ((int *)data)[0] is == 2 for TTY HCO (hearing carryover)
+ * ((int *)data)[0] is == 3 for TTY VCO (voice carryover)
+ *
+ * "response" is NULL
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE
+ *  GENERIC_FAILURE
+ */
+#define RIL_REQUEST_SET_TTY_MODE 80
+
+/**
+ * RIL_REQUEST_QUERY_TTY_MODE
+ *
+ * Request the setting of TTY mode
+ *
+ * "data" is NULL
+ *
+ * "response" is int *
+ * ((int *)response)[0] is == 0 for TTY off
+ * ((int *)response)[0] is == 1 for TTY Full
+ * ((int *)response)[0] is == 2 for TTY HCO (hearing carryover)
+ * ((int *)response)[0] is == 3 for TTY VCO (voice carryover)
+ *
+ * "response" is NULL
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE
+ *  GENERIC_FAILURE
+ */
+#define RIL_REQUEST_QUERY_TTY_MODE 81
+
+/**
+ * RIL_REQUEST_CDMA_SET_PREFERRED_VOICE_PRIVACY_MODE
+ *
+ * Request to set the preferred voice privacy mode used in voice
+ * scrambling
+ *
+ * "data" is int *
+ * ((int *)data)[0] is == 0 for Standard Privacy Mode (Public Long Code Mask)
+ * ((int *)data)[0] is == 1 for Enhanced Privacy Mode (Private Long Code Mask)
+ *
+ * "response" is NULL
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE
+ *  GENERIC_FAILURE
+ */
+#define RIL_REQUEST_CDMA_SET_PREFERRED_VOICE_PRIVACY_MODE 82
+
+/**
+ * RIL_REQUEST_CDMA_QUERY_PREFERRED_VOICE_PRIVACY_MODE
+ *
+ * Request the setting of preferred voice privacy mode
+ *
+ * "data" is NULL
+ *
+ * "response" is int *
+ * ((int *)response)[0] is == 0 for Standard Privacy Mode (Public Long Code Mask)
+ * ((int *)response)[0] is == 1 for Enhanced Privacy Mode (Private Long Code Mask)
+ *
+ * "response" is NULL
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE
+ *  GENERIC_FAILURE
+ */
+#define RIL_REQUEST_CDMA_QUERY_PREFERRED_VOICE_PRIVACY_MODE 83
+
+/**
+ * RIL_REQUEST_CDMA_FLASH
+ *
+ * Send FLASH
+ *
+ * "data" is const char *
+ * ((const char *)data)[0] is a FLASH string
+ *
+ * "response" is NULL
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE
+ *  GENERIC_FAILURE
+ *
+ */
+#define RIL_REQUEST_CDMA_FLASH 84
+
+/**
+ * RIL_REQUEST_CDMA_BURST_DTMF
+ *
+ * Send DTMF string
+ *
+ * "data" is const char **
+ * ((const char **)data)[0] is a DTMF string
+ * ((const char **)data)[1] is the DTMF ON length in milliseconds, or 0 to use
+ *                          default
+ * ((const char **)data)[2] is the DTMF OFF length in milliseconds, or 0 to use
+ *                          default
+ *
+ * "response" is NULL
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE
+ *  GENERIC_FAILURE
+ *
+ */
+#define RIL_REQUEST_CDMA_BURST_DTMF 85
+
+/**
+ * RIL_REQUEST_CDMA_VALIDATE_AND_WRITE_AKEY
+ *
+ * Takes a 26 digit string (20 digit AKEY + 6 digit checksum).
+ * If the checksum is valid the 20 digit AKEY is written to NV,
+ * replacing the existing AKEY no matter what it was before.
+ *
+ * "data" is const char *
+ * ((const char *)data)[0] is a 26 digit string (ASCII digits '0'-'9')
+ *                         where the last 6 digits are a checksum of the
+ *                         first 20, as specified in TR45.AHAG
+ *                         "Common Cryptographic Algorithms, Revision D.1
+ *                         Section 2.2"
+ *
+ * "response" is NULL
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE
+ *  GENERIC_FAILURE
+ *
+ */
+#define RIL_REQUEST_CDMA_VALIDATE_AND_WRITE_AKEY 86
+
+/**
+ * RIL_REQUEST_CDMA_SEND_SMS
+ *
+ * Send a CDMA SMS message
+ *
+ * "data" is const RIL_CDMA_SMS_Message *
+ *
+ * "response" is a const RIL_SMS_Response *
+ *
+ * Based on the return error, caller decides to resend if sending sms
+ * fails. The CDMA error class is derived as follows,
+ * SUCCESS is error class 0 (no error)
+ * SMS_SEND_FAIL_RETRY is error class 2 (temporary failure)
+ * and GENERIC_FAILURE is error class 3 (permanent and no retry)
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE
+ *  SMS_SEND_FAIL_RETRY
+ *  GENERIC_FAILURE
+ *
+ */
+#define RIL_REQUEST_CDMA_SEND_SMS 87
+
+/**
+ * RIL_REQUEST_CDMA_SMS_ACKNOWLEDGE
+ *
+ * Acknowledge the success or failure in the receipt of SMS
+ * previously indicated via RIL_UNSOL_RESPONSE_CDMA_NEW_SMS
+ *
+ * "data" is const RIL_CDMA_SMS_Ack *
+ *
+ * "response" is NULL
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE
+ *  GENERIC_FAILURE
+ *
+ */
+#define RIL_REQUEST_CDMA_SMS_ACKNOWLEDGE 88
+
+/**
+ * RIL_REQUEST_GSM_GET_BROADCAST_SMS_CONFIG
+ *
+ * Request the setting of GSM/WCDMA Cell Broadcast SMS config.
+ *
+ * "data" is NULL
+ *
+ * "response" is a const RIL_GSM_BroadcastSmsConfigInfo **
+ * "responselen" is count * sizeof (RIL_GSM_BroadcastSmsConfigInfo *)
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE
+ *  GENERIC_FAILURE
+ *
+ */
+#define RIL_REQUEST_GSM_GET_BROADCAST_SMS_CONFIG 89
+
+/**
+ * RIL_REQUEST_GSM_SET_BROADCAST_SMS_CONFIG
+ *
+ * Set GSM/WCDMA Cell Broadcast SMS config
+ *
+ * "data" is a const RIL_GSM_BroadcastSmsConfigInfo **
+ * "datalen" is count * sizeof(RIL_GSM_BroadcastSmsConfigInfo *)
+ *
+ * "response" is NULL
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE
+ *  GENERIC_FAILURE
+ *
+ */
+#define RIL_REQUEST_GSM_SET_BROADCAST_SMS_CONFIG 90
+
+/**
+ * RIL_REQUEST_GSM_SMS_BROADCAST_ACTIVATION
+ *
+* Enable or disable the reception of GSM/WCDMA Cell Broadcast SMS
+ *
+ * "data" is const int *
+ * (const int *)data[0] indicates to activate or turn off the
+ * reception of GSM/WCDMA Cell Broadcast SMS, 0-1,
+ *                       0 - Activate, 1 - Turn off
+ *
+ * "response" is NULL
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE
+ *  GENERIC_FAILURE
+ *
+ */
+#define RIL_REQUEST_GSM_SMS_BROADCAST_ACTIVATION 91
+
+/**
+ * RIL_REQUEST_CDMA_GET_BROADCAST_SMS_CONFIG
+ *
+ * Request the setting of CDMA Broadcast SMS config
+ *
+ * "data" is NULL
+ *
+ * "response" is a const RIL_CDMA_BroadcastSmsConfigInfo **
+ * "responselen" is count * sizeof (RIL_CDMA_BroadcastSmsConfigInfo *)
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE
+ *  GENERIC_FAILURE
+ *
+ */
+#define RIL_REQUEST_CDMA_GET_BROADCAST_SMS_CONFIG 92
+
+/**
+ * RIL_REQUEST_CDMA_SET_BROADCAST_SMS_CONFIG
+ *
+ * Set CDMA Broadcast SMS config
+ *
+ * "data" is an const RIL_CDMA_BroadcastSmsConfigInfo **
+ * "datalen" is count * sizeof(const RIL_CDMA_BroadcastSmsConfigInfo *)
+ *
+ * "response" is NULL
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE
+ *  GENERIC_FAILURE
+ *
+ */
+#define RIL_REQUEST_CDMA_SET_BROADCAST_SMS_CONFIG 93
+
+/**
+ * RIL_REQUEST_CDMA_SMS_BROADCAST_ACTIVATION
+ *
+ * Enable or disable the reception of CDMA Broadcast SMS
+ *
+ * "data" is const int *
+ * (const int *)data[0] indicates to activate or turn off the
+ * reception of CDMA Broadcast SMS, 0-1,
+ *                       0 - Activate, 1 - Turn off
+ *
+ * "response" is NULL
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE
+ *  GENERIC_FAILURE
+ *
+ */
+#define RIL_REQUEST_CDMA_SMS_BROADCAST_ACTIVATION 94
+
+/**
+ * RIL_REQUEST_CDMA_SUBSCRIPTION
+ *
+ * Request the device MDN / H_SID / H_NID.
+ *
+ * The request is only allowed when CDMA subscription is available.  When CDMA
+ * subscription is changed, application layer should re-issue the request to
+ * update the subscription information.
+ *
+ * If a NULL value is returned for any of the device id, it means that error
+ * accessing the device.
+ *
+ * "response" is const char **
+ * ((const char **)response)[0] is MDN if CDMA subscription is available
+ * ((const char **)response)[1] is a comma separated list of H_SID (Home SID) if
+ *                              CDMA subscription is available, in decimal format
+ * ((const char **)response)[2] is a comma separated list of H_NID (Home NID) if
+ *                              CDMA subscription is available, in decimal format
+ * ((const char **)response)[3] is MIN (10 digits, MIN2+MIN1) if CDMA subscription is available
+ * ((const char **)response)[4] is PRL version if CDMA subscription is available
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RIL_E_SUBSCRIPTION_NOT_AVAILABLE
+ */
+
+#define RIL_REQUEST_CDMA_SUBSCRIPTION 95
+
+/**
+ * RIL_REQUEST_CDMA_WRITE_SMS_TO_RUIM
+ *
+ * Stores a CDMA SMS message to RUIM memory.
+ *
+ * "data" is RIL_CDMA_SMS_WriteArgs *
+ *
+ * "response" is int *
+ * ((const int *)response)[0] is the record index where the message is stored.
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE
+ *  GENERIC_FAILURE
+ *
+ */
+#define RIL_REQUEST_CDMA_WRITE_SMS_TO_RUIM 96
+
+/**
+ * RIL_REQUEST_CDMA_DELETE_SMS_ON_RUIM
+ *
+ * Deletes a CDMA SMS message from RUIM memory.
+ *
+ * "data" is int  *
+ * ((int *)data)[0] is the record index of the message to delete.
+ *
+ * "response" is NULL
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE
+ *  GENERIC_FAILURE
+ *
+ */
+#define RIL_REQUEST_CDMA_DELETE_SMS_ON_RUIM 97
+
+/**
+ * RIL_REQUEST_DEVICE_IDENTITY
+ *
+ * Request the device ESN / MEID / IMEI / IMEISV.
+ *
+ * The request is always allowed and contains GSM and CDMA device identity;
+ * it substitutes the deprecated requests RIL_REQUEST_GET_IMEI and
+ * RIL_REQUEST_GET_IMEISV.
+ *
+ * If a NULL value is returned for any of the device id, it means that error
+ * accessing the device.
+ *
+ * When CDMA subscription is changed the ESN/MEID may change.  The application
+ * layer should re-issue the request to update the device identity in this case.
+ *
+ * "response" is const char **
+ * ((const char **)response)[0] is IMEI if GSM subscription is available
+ * ((const char **)response)[1] is IMEISV if GSM subscription is available
+ * ((const char **)response)[2] is ESN if CDMA subscription is available
+ * ((const char **)response)[3] is MEID if CDMA subscription is available
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE
+ *  GENERIC_FAILURE
+ */
+#define RIL_REQUEST_DEVICE_IDENTITY 98
+
+/**
+ * RIL_REQUEST_EXIT_EMERGENCY_CALLBACK_MODE
+ *
+ * Request the radio's system selection module to exit emergency
+ * callback mode.  RIL will not respond with SUCCESS until the modem has
+ * completely exited from Emergency Callback Mode.
+ *
+ * "data" is NULL
+ *
+ * "response" is NULL
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE
+ *  GENERIC_FAILURE
+ *
+ */
+#define RIL_REQUEST_EXIT_EMERGENCY_CALLBACK_MODE 99
+
+/**
+ * RIL_REQUEST_GET_SMSC_ADDRESS
+ *
+ * Queries the default Short Message Service Center address on the device.
+ *
+ * "data" is NULL
+ *
+ * "response" is const char * containing the SMSC address.
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE
+ *  GENERIC_FAILURE
+ *
+ */
+#define RIL_REQUEST_GET_SMSC_ADDRESS 100
+
+/**
+ * RIL_REQUEST_SET_SMSC_ADDRESS
+ *
+ * Sets the default Short Message Service Center address on the device.
+ *
+ * "data" is const char * containing the SMSC address.
+ *
+ * "response" is NULL
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE
+ *  GENERIC_FAILURE
+ *
+ */
+#define RIL_REQUEST_SET_SMSC_ADDRESS 101
+
+/**
+ * RIL_REQUEST_REPORT_SMS_MEMORY_STATUS
+ *
+ * Indicates whether there is storage available for new SMS messages.
+ *
+ * "data" is int *
+ * ((int *)data)[0] is 1 if memory is available for storing new messages
+ *                  is 0 if memory capacity is exceeded
+ *
+ * "response" is NULL
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE
+ *  GENERIC_FAILURE
+ *
+ */
+#define RIL_REQUEST_REPORT_SMS_MEMORY_STATUS 102
+
+/**
+ * RIL_REQUEST_REPORT_STK_SERVICE_IS_RUNNING
+ *
+ * Indicates that the StkSerivce is running and is
+ * ready to receive RIL_UNSOL_STK_XXXXX commands.
+ *
+ * "data" is NULL
+ * "response" is NULL
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE
+ *  GENERIC_FAILURE
+ *
+ */
+#define RIL_REQUEST_REPORT_STK_SERVICE_IS_RUNNING 103
+
+/**
+ * RIL_REQUEST_CDMA_GET_SUBSCRIPTION_SOURCE
+ *
+ * Request to query the location where the CDMA subscription shall
+ * be retrieved
+ *
+ * "data" is NULL
+ *
+ * "response" is int *
+ * ((int *)data)[0] is == RIL_CdmaSubscriptionSource
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE
+ *  GENERIC_FAILURE
+ *  SUBSCRIPTION_NOT_AVAILABLE
+ *
+ * See also: RIL_REQUEST_CDMA_SET_SUBSCRIPTION_SOURCE
+ */
+#define RIL_REQUEST_CDMA_GET_SUBSCRIPTION_SOURCE 104
+
+/**
+ * RIL_REQUEST_ISIM_AUTHENTICATION
+ *
+ * Request the ISIM application on the UICC to perform AKA
+ * challenge/response algorithm for IMS authentication
+ *
+ * "data" is a const char * containing the challenge string in Base64 format
+ * "response" is a const char * containing the response in Base64 format
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE
+ *  GENERIC_FAILURE
+ */
+#define RIL_REQUEST_ISIM_AUTHENTICATION 105
+
+/**
+ * RIL_REQUEST_ACKNOWLEDGE_INCOMING_GSM_SMS_WITH_PDU
+ *
+ * Acknowledge successful or failed receipt of SMS previously indicated
+ * via RIL_UNSOL_RESPONSE_NEW_SMS, including acknowledgement TPDU to send
+ * as the RP-User-Data element of the RP-ACK or RP-ERROR PDU.
+ *
+ * "data" is const char **
+ * ((const char **)data)[0] is "1" on successful receipt (send RP-ACK)
+ *                          is "0" on failed receipt (send RP-ERROR)
+ * ((const char **)data)[1] is the acknowledgement TPDU in hexadecimal format
+ *
+ * "response" is NULL
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE
+ *  GENERIC_FAILURE
+ */
+#define RIL_REQUEST_ACKNOWLEDGE_INCOMING_GSM_SMS_WITH_PDU 106
+
+/**
+ * RIL_REQUEST_STK_SEND_ENVELOPE_WITH_STATUS
+ *
+ * Requests to send a SAT/USAT envelope command to SIM.
+ * The SAT/USAT envelope command refers to 3GPP TS 11.14 and 3GPP TS 31.111.
+ *
+ * This request has one difference from RIL_REQUEST_STK_SEND_ENVELOPE_COMMAND:
+ * the SW1 and SW2 status bytes from the UICC response are returned along with
+ * the response data, using the same structure as RIL_REQUEST_SIM_IO.
+ *
+ * The RIL implementation shall perform the normal processing of a '91XX'
+ * response in SW1/SW2 to retrieve the pending proactive command and send it
+ * as an unsolicited response, as RIL_REQUEST_STK_SEND_ENVELOPE_COMMAND does.
+ *
+ * "data" is a const char * containing the SAT/USAT command
+ * in hexadecimal format starting with command tag
+ *
+ * "response" is a const RIL_SIM_IO_Response *
+ *
+ * Valid errors:
+ *  RIL_E_SUCCESS
+ *  RIL_E_RADIO_NOT_AVAILABLE (radio resetting)
+ *  RIL_E_GENERIC_FAILURE
+ */
+#define RIL_REQUEST_STK_SEND_ENVELOPE_WITH_STATUS 107
+
+/**
+ * RIL_REQUEST_VOICE_RADIO_TECH
+ *
+ * Query the radio technology type (3GPP/3GPP2) used for voice. Query is valid only
+ * when radio state is RADIO_STATE_ON
+ *
+ * "data" is NULL
+ * "response" is int *
+ * ((int *) response)[0] is of type const RIL_RadioTechnology
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE
+ *  GENERIC_FAILURE
+ */
+#define RIL_REQUEST_VOICE_RADIO_TECH 108
+
+/**
+ * RIL_REQUEST_GET_CELL_INFO_LIST
+ *
+ * Request all of the current cell information known to the radio. The radio
+ * must a list of all current cells, including the neighboring cells. If for a particular
+ * cell information isn't known then the appropriate unknown value will be returned.
+ * This does not cause or change the rate of RIL_UNSOL_CELL_INFO_LIST.
+ *
+ * "data" is NULL
+ *
+ * "response" is an array of  RIL_CellInfo.
+ */
+#define RIL_REQUEST_GET_CELL_INFO_LIST 109
+
+/**
+ * RIL_REQUEST_SET_UNSOL_CELL_INFO_LIST_RATE
+ *
+ * Sets the minimum time between when RIL_UNSOL_CELL_INFO_LIST should be invoked.
+ * A value of 0, means invoke RIL_UNSOL_CELL_INFO_LIST when any of the reported
+ * information changes. Setting the value to INT_MAX(0x7fffffff) means never issue
+ * a RIL_UNSOL_CELL_INFO_LIST.
+ *
+ * "data" is int *
+ * ((int *)data)[0] is minimum time in milliseconds
+ *
+ * "response" is NULL
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE
+ *  GENERIC_FAILURE
+ */
+#define RIL_REQUEST_SET_UNSOL_CELL_INFO_LIST_RATE 110
+
+/**
+ * RIL_REQUEST_SET_INITIAL_ATTACH_APN
+ *
+ * Set an apn to initial attach network
+ * "response" is NULL
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE (radio resetting)
+ *  GENERIC_FAILURE
+ *  SUBSCRIPTION_NOT_AVAILABLE
+ */
+#define RIL_REQUEST_SET_INITIAL_ATTACH_APN 111
+
+/**
+ * RIL_REQUEST_IMS_REGISTRATION_STATE
+ *
+ * Request current IMS registration state
+ *
+ * "data" is NULL
+ *
+ * "response" is int *
+ * ((int *)response)[0] is registration state:
+ *              0 - Not registered
+ *              1 - Registered
+ *
+ * If ((int*)response)[0] is = 1, then ((int *) response)[1]
+ * must follow with IMS SMS format:
+ *
+ * ((int *) response)[1] is of type RIL_RadioTechnologyFamily
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE
+ *  GENERIC_FAILURE
+ */
+#define RIL_REQUEST_IMS_REGISTRATION_STATE 112
+
+/**
+ * RIL_REQUEST_IMS_SEND_SMS
+ *
+ * Send a SMS message over IMS
+ *
+ * "data" is const RIL_IMS_SMS_Message *
+ *
+ * "response" is a const RIL_SMS_Response *
+ *
+ * Based on the return error, caller decides to resend if sending sms
+ * fails. SMS_SEND_FAIL_RETRY means retry, and other errors means no retry.
+ * In case of retry, data is encoded based on Voice Technology available.
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE
+ *  SMS_SEND_FAIL_RETRY
+ *  FDN_CHECK_FAILURE
+ *  GENERIC_FAILURE
+ *
+ */
+#define RIL_REQUEST_IMS_SEND_SMS 113
+
+/**
+ * RIL_REQUEST_SIM_TRANSMIT_APDU_BASIC
+ *
+ * Request APDU exchange on the basic channel. This command reflects TS 27.007
+ * "generic SIM access" operation (+CSIM). The modem must ensure proper function
+ * of GSM/CDMA, and filter commands appropriately. It should filter
+ * channel management and SELECT by DF name commands.
+ *
+ * "data" is a const RIL_SIM_APDU *
+ * "sessionid" field should be ignored.
+ *
+ * "response" is a const RIL_SIM_IO_Response *
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE
+ *  GENERIC_FAILURE
+ */
+#define RIL_REQUEST_SIM_TRANSMIT_APDU_BASIC 114
+
+/**
+ * RIL_REQUEST_SIM_OPEN_CHANNEL
+ *
+ * Open a new logical channel and select the given application. This command
+ * reflects TS 27.007 "open logical channel" operation (+CCHO).
+ *
+ * "data" is const char * and set to AID value, See ETSI 102.221 and 101.220.
+ *
+ * "response" is int *
+ * ((int *)data)[0] contains the session id of the logical channel.
+ * ((int *)data)[1] onwards may optionally contain the select response for the
+ *     open channel command with one byte per integer.
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE
+ *  GENERIC_FAILURE
+ *  MISSING_RESOURCE
+ *  NO_SUCH_ELEMENT
+ */
+#define RIL_REQUEST_SIM_OPEN_CHANNEL 115
+
+/**
+ * RIL_REQUEST_SIM_CLOSE_CHANNEL
+ *
+ * Close a previously opened logical channel. This command reflects TS 27.007
+ * "close logical channel" operation (+CCHC).
+ *
+ * "data" is int *
+ * ((int *)data)[0] is the session id of logical the channel to close.
+ *
+ * "response" is NULL
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE
+ *  GENERIC_FAILURE
+ */
+#define RIL_REQUEST_SIM_CLOSE_CHANNEL 116
+
+/**
+ * RIL_REQUEST_SIM_TRANSMIT_APDU_CHANNEL
+ *
+ * Exchange APDUs with a UICC over a previously opened logical channel. This
+ * command reflects TS 27.007 "generic logical channel access" operation
+ * (+CGLA). The modem should filter channel management and SELECT by DF name
+ * commands.
+ *
+ * "data" is a const RIL_SIM_APDU*
+ *
+ * "response" is a const RIL_SIM_IO_Response *
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE
+ *  GENERIC_FAILURE
+ */
+#define RIL_REQUEST_SIM_TRANSMIT_APDU_CHANNEL 117
+
+/**
+ * RIL_REQUEST_NV_READ_ITEM
+ *
+ * Read one of the radio NV items defined in RadioNVItems.java / ril_nv_items.h.
+ * This is used for device configuration by some CDMA operators.
+ *
+ * "data" is a const RIL_NV_ReadItem *
+ *
+ * "response" is const char * containing the contents of the NV item
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE
+ *  GENERIC_FAILURE
+ */
+#define RIL_REQUEST_NV_READ_ITEM 118
+
+/**
+ * RIL_REQUEST_NV_WRITE_ITEM
+ *
+ * Write one of the radio NV items defined in RadioNVItems.java / ril_nv_items.h.
+ * This is used for device configuration by some CDMA operators.
+ *
+ * "data" is a const RIL_NV_WriteItem *
+ *
+ * "response" is NULL
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE
+ *  GENERIC_FAILURE
+ */
+#define RIL_REQUEST_NV_WRITE_ITEM 119
+
+/**
+ * RIL_REQUEST_NV_WRITE_CDMA_PRL
+ *
+ * Update the CDMA Preferred Roaming List (PRL) in the radio NV storage.
+ * This is used for device configuration by some CDMA operators.
+ *
+ * "data" is a const char * containing the PRL as a byte array
+ *
+ * "response" is NULL
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE
+ *  GENERIC_FAILURE
+ */
+#define RIL_REQUEST_NV_WRITE_CDMA_PRL 120
+
+/**
+ * RIL_REQUEST_NV_RESET_CONFIG
+ *
+ * Reset the radio NV configuration to the factory state.
+ * This is used for device configuration by some CDMA operators.
+ *
+ * "data" is int *
+ * ((int *)data)[0] is 1 to reload all NV items
+ * ((int *)data)[0] is 2 for erase NV reset (SCRTN)
+ * ((int *)data)[0] is 3 for factory reset (RTN)
+ *
+ * "response" is NULL
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE
+ *  GENERIC_FAILURE
+ */
+#define RIL_REQUEST_NV_RESET_CONFIG 121
+
+ /** RIL_REQUEST_SET_UICC_SUBSCRIPTION
+ * FIXME This API needs to have more documentation.
+ *
+ * Selection/de-selection of a subscription from a SIM card
+ * "data" is const  RIL_SelectUiccSub*
+
+ *
+ * "response" is NULL
+ *
+ *  Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE (radio resetting)
+ *  GENERIC_FAILURE
+ *  SUBSCRIPTION_NOT_SUPPORTED
+ *
+ */
+#define RIL_REQUEST_SET_UICC_SUBSCRIPTION  122
+
+/**
+ *  RIL_REQUEST_ALLOW_DATA
+ *
+ *  Tells the modem whether data calls are allowed or not
+ *
+ * "data" is int *
+ * FIXME slotId and aid will be added.
+ * ((int *)data)[0] is == 0 to allow data calls
+ * ((int *)data)[0] is == 1 to disallow data calls
+ *
+ * "response" is NULL
+ *
+ *  Valid errors:
+ *
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE (radio resetting)
+ *  GENERIC_FAILURE
+ *
+ */
+#define RIL_REQUEST_ALLOW_DATA  123
+
+/**
+ * RIL_REQUEST_GET_HARDWARE_CONFIG
+ *
+ * Request all of the current hardware (modem and sim) associated
+ * with the RIL.
+ *
+ * "data" is NULL
+ *
+ * "response" is an array of  RIL_HardwareConfig.
+ */
+#define RIL_REQUEST_GET_HARDWARE_CONFIG 124
+
+/**
+ * RIL_REQUEST_SIM_AUTHENTICATION
+ *
+ * Returns the response of SIM Authentication through RIL to a
+ * challenge request.
+ *
+ * "data" Base64 encoded string containing challenge:
+ *      int   authContext;          P2 value of authentication command, see P2 parameter in
+ *                                  3GPP TS 31.102 7.1.2
+ *      char *authData;             the challenge string in Base64 format, see 3GPP
+ *                                  TS 31.102 7.1.2
+ *      char *aid;                  AID value, See ETSI 102.221 8.1 and 101.220 4,
+ *                                  NULL if no value
+ *
+ * "response" Base64 encoded strings containing response:
+ *      int   sw1;                  Status bytes per 3GPP TS 31.102 section 7.3
+ *      int   sw2;
+ *      char *simResponse;          Response in Base64 format, see 3GPP TS 31.102 7.1.2
+ */
+#define RIL_REQUEST_SIM_AUTHENTICATION 125
+
+/**
+ * RIL_REQUEST_GET_DC_RT_INFO
+ *
+ * The request is DEPRECATED, use RIL_REQUEST_GET_ACTIVITY_INFO
+ * Requests the Data Connection Real Time Info
+ *
+ * "data" is NULL
+ *
+ * "response" is the most recent RIL_DcRtInfo
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE
+ *  GENERIC_FAILURE
+ *
+ * See also: RIL_UNSOL_DC_RT_INFO_CHANGED
+ */
+#define RIL_REQUEST_GET_DC_RT_INFO 126
+
+/**
+ * RIL_REQUEST_SET_DC_RT_INFO_RATE
+ *
+ * The request is DEPRECATED
+ * This is the minimum number of milliseconds between successive
+ * RIL_UNSOL_DC_RT_INFO_CHANGED messages and defines the highest rate
+ * at which RIL_UNSOL_DC_RT_INFO_CHANGED's will be sent. A value of
+ * 0 means send as fast as possible.
+ *
+ * "data" The number of milliseconds as an int
+ *
+ * "response" is null
+ *
+ * Valid errors:
+ *  SUCCESS must not fail
+ */
+#define RIL_REQUEST_SET_DC_RT_INFO_RATE 127
+
+/**
+ * RIL_REQUEST_SET_DATA_PROFILE
+ *
+ * Set data profile in modem
+ * Modem should erase existed profiles from framework, and apply new profiles
+ * "data" is an const RIL_DataProfileInfo **
+ * "datalen" is count * sizeof(const RIL_DataProfileInfo *)
+ * "response" is NULL
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE (radio resetting)
+ *  GENERIC_FAILURE
+ *  SUBSCRIPTION_NOT_AVAILABLE
+ */
+#define RIL_REQUEST_SET_DATA_PROFILE 128
+
+/**
+ * RIL_REQUEST_SHUTDOWN
+ *
+ * Device is shutting down. All further commands are ignored
+ * and RADIO_NOT_AVAILABLE must be returned.
+ *
+ * "data" is null
+ * "response" is NULL
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE
+ *  GENERIC_FAILURE
+ */
+#define RIL_REQUEST_SHUTDOWN 129
+
+/**
+ * RIL_REQUEST_GET_RADIO_CAPABILITY
+ *
+ * Used to get phone radio capablility.
+ *
+ * "data" is the RIL_RadioCapability structure
+ *
+ * Valid errors:
+ *  SUCCESS
+ *  RADIO_NOT_AVAILABLE
+ *  GENERIC_FAILURE
+ */
+#define RIL_REQUEST_GET_RADIO_CAPABILITY 130
+
+/**
+ * RIL_REQUEST_SET_RADIO_CAPABILITY
+ *
+ * Used to set the phones radio capability. Be VERY careful
+ * using this request as it may cause some vendor modems to reset. Because
+ * of the possible modem reset any RIL commands after this one may not be
+ * processed.
+ *
+ * "data" is the RIL_RadioCapability structure
+ *
+ * "response" is the RIL_RadioCapability structure, used to feedback return status
+ *
+ * Valid errors:
+ *  SUCCESS means a RIL_UNSOL_RADIO_CAPABILITY will be sent within 30 seconds.
+ *  RADIO_NOT_AVAILABLE
+ *  GENERIC_FAILURE
+ */
+#define RIL_REQUEST_SET_RADIO_CAPABILITY 131
+
+ /**
+ * RIL_REQUEST_START_LCE
+ *
+ * Start Link Capacity Estimate (LCE) service if supported by the radio.
+ *
+ * "data" is const int *
+ * ((const int*)data)[0] specifies the desired reporting interval (ms).
+ * ((const int*)data)[1] specifies the LCE service mode. 1: PULL; 0: PUSH.
+ *
+ * "response" is the RIL_LceStatusInfo.
+ *
+ * Valid errors:
+ * SUCCESS
+ * RADIO_NOT_AVAILABLE
+ * LCE_NOT_SUPPORTED
+ */
+#define RIL_REQUEST_START_LCE 132
+
+/**
+ * RIL_REQUEST_STOP_LCE
+ *
+ * Stop Link Capacity Estimate (LCE) service, the STOP operation should be
+ * idempotent for the radio modem.
+ *
+ * "response" is the RIL_LceStatusInfo.
+ *
+ * Valid errors:
+ * SUCCESS
+ * RADIO_NOT_AVAILABLE
+ * LCE_NOT_SUPPORTED
+ */
+#define RIL_REQUEST_STOP_LCE 133
+
+/**
+ * RIL_REQUEST_PULL_LCEDATA
+ *
+ * Pull LCE service for capacity information.
+ *
+ * "response" is the RIL_LceDataInfo.
+ *
+ * Valid errors:
+ * SUCCESS
+ * RADIO_NOT_AVAILABLE
+ * LCE_NOT_SUPPORTED
+ */
+#define RIL_REQUEST_PULL_LCEDATA 134
+ /**
+ * RIL_REQUEST_GET_ACTIVITY_INFO
+ *
+ * Get modem activity statisitics info.
+ *
+ * There can be multiple RIL_REQUEST_GET_ACTIVITY_INFO calls to modem.
+ * Once the response for the request is sent modem will clear
+ * current statistics information.
+ *
+ * "data" is null
+ * "response" is const RIL_ActivityStatsInfo *
+ *
+ * Valid errors:
+ *
+ * SUCCESS
+ * RADIO_NOT_AVAILABLE (radio resetting)
+ * GENERIC_FAILURE
+ */
+#define RIL_REQUEST_GET_ACTIVITY_INFO 135
+
+
+/* SAMSUNG REQUESTS */
+#undef RIL_REQUEST_SIM_OPEN_CHANNEL
+#undef RIL_REQUEST_SIM_CLOSE_CHANNEL
+
+#define RIL_REQUEST_GET_CELL_BROADCAST_CONFIG 10002
+
+#define RIL_REQUEST_SEND_ENCODED_USSD 10005
+#define RIL_REQUEST_SET_PDA_MEMORY_STATUS 10006
+#define RIL_REQUEST_GET_PHONEBOOK_STORAGE_INFO 10007
+#define RIL_REQUEST_GET_PHONEBOOK_ENTRY 10008
+#define RIL_REQUEST_ACCESS_PHONEBOOK_ENTRY 10009
+#define RIL_REQUEST_DIAL_VIDEO_CALL 10010
+#define RIL_REQUEST_CALL_DEFLECTION 10011
+#define RIL_REQUEST_READ_SMS_FROM_SIM 10012
+#define RIL_REQUEST_USIM_PB_CAPA 10013
+#define RIL_REQUEST_LOCK_INFO 10014
+
+#define RIL_REQUEST_DIAL_EMERGENCY 10016
+#define RIL_REQUEST_GET_STOREAD_MSG_COUNT 10017
+#define RIL_REQUEST_STK_SIM_INIT_EVENT 10018
+#define RIL_REQUEST_GET_LINE_ID 10019
+#define RIL_REQUEST_SET_LINE_ID 10020
+#define RIL_REQUEST_GET_SERIAL_NUMBER 10021
+#define RIL_REQUEST_GET_MANUFACTURE_DATE_NUMBER 10022
+#define RIL_REQUEST_GET_BARCODE_NUMBER 10023
+#define RIL_REQUEST_UICC_GBA_AUTHENTICATE_BOOTSTRAP 10024
+#define RIL_REQUEST_UICC_GBA_AUTHENTICATE_NAF 10025
+#define RIL_REQUEST_SIM_TRANSMIT_BASIC 10026
+#define RIL_REQUEST_SIM_OPEN_CHANNEL 10027
+#define RIL_REQUEST_SIM_CLOSE_CHANNEL 10028
+#define RIL_REQUEST_SIM_TRANSMIT_CHANNEL 10029
+#define RIL_REQUEST_SIM_AUTH 10030
+#define RIL_REQUEST_PS_ATTACH 10031
+#define RIL_REQUEST_PS_DETACH 10032
+#define RIL_REQUEST_ACTIVATE_DATA_CALL 10033
+#define RIL_REQUEST_CHANGE_SIM_PERSO 10034
+#define RIL_REQUEST_ENTER_SIM_PERSO 10035
+#define RIL_REQUEST_GET_TIME_INFO 10036
+#define RIL_REQUEST_OMADM_SETUP_SESSION 10037
+#define RIL_REQUEST_OMADM_SERVER_START_SESSION 10038
+#define RIL_REQUEST_OMADM_CLIENT_START_SESSION 10039
+#define RIL_REQUEST_OMADM_SEND_DATA 10040
+#define RIL_REQUEST_CDMA_GET_DATAPROFILE 10041
+#define RIL_REQUEST_CDMA_SET_DATAPROFILE 10042
+#define RIL_REQUEST_CDMA_GET_SYSTEMPROPERTIES 10043
+#define RIL_REQUEST_CDMA_SET_SYSTEMPROPERTIES 10044
+#define RIL_REQUEST_SEND_SMS_COUNT 10045
+#define RIL_REQUEST_SEND_SMS_MSG 10046
+#define RIL_REQUEST_SEND_SMS_MSG_READ_STATUS 10047
+#define RIL_REQUEST_MODEM_HANGUP 10048
+#define RIL_REQUEST_SET_SIM_POWER 10049
+#define RIL_REQUEST_SET_PREFERRED_NETWORK_LIST 10050
+#define RIL_REQUEST_GET_PREFERRED_NETWORK_LIST 10051
+#define RIL_REQUEST_HANGUP_VT 10052
+
+
+/***********************************************************************/
+
+
+#define RIL_UNSOL_RESPONSE_BASE 1000
+
+/**
+ * RIL_UNSOL_RESPONSE_RADIO_STATE_CHANGED
+ *
+ * Indicate when value of RIL_RadioState has changed.
+ *
+ * Callee will invoke RIL_RadioStateRequest method on main thread
+ *
+ * "data" is NULL
+ */
+
+#define RIL_UNSOL_RESPONSE_RADIO_STATE_CHANGED 1000
+
+
+/**
+ * RIL_UNSOL_RESPONSE_CALL_STATE_CHANGED
+ *
+ * Indicate when call state has changed
+ *
+ * Callee will invoke RIL_REQUEST_GET_CURRENT_CALLS on main thread
+ *
+ * "data" is NULL
+ *
+ * Response should be invoked on, for example,
+ * "RING", "BUSY", "NO CARRIER", and also call state
+ * transitions (DIALING->ALERTING ALERTING->ACTIVE)
+ *
+ * Redundent or extraneous invocations are tolerated
+ */
+#define RIL_UNSOL_RESPONSE_CALL_STATE_CHANGED 1001
+
+
+/**
+ * RIL_UNSOL_RESPONSE_VOICE_NETWORK_STATE_CHANGED
+ *
+ * Called when the voice network state changed
+ *
+ * Callee will invoke the following requests on main thread:
+ *
+ * RIL_REQUEST_VOICE_REGISTRATION_STATE
+ * RIL_REQUEST_OPERATOR
+ *
+ * "data" is NULL
+ *
+ * FIXME should this happen when SIM records are loaded? (eg, for
+ * EONS)
+ */
+#define RIL_UNSOL_RESPONSE_VOICE_NETWORK_STATE_CHANGED 1002
+
+/**
+ * RIL_UNSOL_RESPONSE_NEW_SMS
+ *
+ * Called when new SMS is received.
+ *
+ * "data" is const char *
+ * This is a pointer to a string containing the PDU of an SMS-DELIVER
+ * as an ascii string of hex digits. The PDU starts with the SMSC address
+ * per TS 27.005 (+CMT:)
+ *
+ * Callee will subsequently confirm the receipt of thei SMS with a
+ * RIL_REQUEST_SMS_ACKNOWLEDGE
+ *
+ * No new RIL_UNSOL_RESPONSE_NEW_SMS
+ * or RIL_UNSOL_RESPONSE_NEW_SMS_STATUS_REPORT messages should be sent until a
+ * RIL_REQUEST_SMS_ACKNOWLEDGE has been received
+ */
+
+#define RIL_UNSOL_RESPONSE_NEW_SMS 1003
+
+/**
+ * RIL_UNSOL_RESPONSE_NEW_SMS_STATUS_REPORT
+ *
+ * Called when new SMS Status Report is received.
+ *
+ * "data" is const char *
+ * This is a pointer to a string containing the PDU of an SMS-STATUS-REPORT
+ * as an ascii string of hex digits. The PDU starts with the SMSC address
+ * per TS 27.005 (+CDS:).
+ *
+ * Callee will subsequently confirm the receipt of the SMS with a
+ * RIL_REQUEST_SMS_ACKNOWLEDGE
+ *
+ * No new RIL_UNSOL_RESPONSE_NEW_SMS
+ * or RIL_UNSOL_RESPONSE_NEW_SMS_STATUS_REPORT messages should be sent until a
+ * RIL_REQUEST_SMS_ACKNOWLEDGE has been received
+ */
+
+#define RIL_UNSOL_RESPONSE_NEW_SMS_STATUS_REPORT 1004
+
+/**
+ * RIL_UNSOL_RESPONSE_NEW_SMS_ON_SIM
+ *
+ * Called when new SMS has been stored on SIM card
+ *
+ * "data" is const int *
+ * ((const int *)data)[0] contains the slot index on the SIM that contains
+ * the new message
+ */
+
+#define RIL_UNSOL_RESPONSE_NEW_SMS_ON_SIM 1005
+
+/**
+ * RIL_UNSOL_ON_USSD
+ *
+ * Called when a new USSD message is received.
+ *
+ * "data" is const char **
+ * ((const char **)data)[0] points to a type code, which is
+ *  one of these string values:
+ *      "0"   USSD-Notify -- text in ((const char **)data)[1]
+ *      "1"   USSD-Request -- text in ((const char **)data)[1]
+ *      "2"   Session terminated by network
+ *      "3"   other local client (eg, SIM Toolkit) has responded
+ *      "4"   Operation not supported
+ *      "5"   Network timeout
+ *
+ * The USSD session is assumed to persist if the type code is "1", otherwise
+ * the current session (if any) is assumed to have terminated.
+ *
+ * ((const char **)data)[1] points to a message string if applicable, which
+ * should always be in UTF-8.
+ */
+#define RIL_UNSOL_ON_USSD 1006
+/* Previously #define RIL_UNSOL_ON_USSD_NOTIFY 1006   */
+
+/**
+ * RIL_UNSOL_ON_USSD_REQUEST
+ *
+ * Obsolete. Send via RIL_UNSOL_ON_USSD
+ */
+#define RIL_UNSOL_ON_USSD_REQUEST 1007
+
+/**
+ * RIL_UNSOL_NITZ_TIME_RECEIVED
+ *
+ * Called when radio has received a NITZ time message
+ *
+ * "data" is const char * pointing to NITZ time string
+ * in the form "yy/mm/dd,hh:mm:ss(+/-)tz,dt"
+ */
+#define RIL_UNSOL_NITZ_TIME_RECEIVED  1008
+
+/**
+ * RIL_UNSOL_SIGNAL_STRENGTH
+ *
+ * Radio may report signal strength rather han have it polled.
+ *
+ * "data" is a const RIL_SignalStrength *
+ */
+#define RIL_UNSOL_SIGNAL_STRENGTH  1009
+
+
+/**
+ * RIL_UNSOL_DATA_CALL_LIST_CHANGED
+ *
+ * "data" is an array of RIL_Data_Call_Response_v6 identical to that
+ * returned by RIL_REQUEST_DATA_CALL_LIST. It is the complete list
+ * of current data contexts including new contexts that have been
+ * activated. A data call is only removed from this list when the
+ * framework sends a RIL_REQUEST_DEACTIVATE_DATA_CALL or the radio
+ * is powered off/on.
+ *
+ * See also: RIL_REQUEST_DATA_CALL_LIST
+ */
+
+#define RIL_UNSOL_DATA_CALL_LIST_CHANGED 1010
+
+/**
+ * RIL_UNSOL_SUPP_SVC_NOTIFICATION
+ *
+ * Reports supplementary service related notification from the network.
+ *
+ * "data" is a const RIL_SuppSvcNotification *
+ *
+ */
+
+#define RIL_UNSOL_SUPP_SVC_NOTIFICATION 1011
+
+/**
+ * RIL_UNSOL_STK_SESSION_END
+ *
+ * Indicate when STK session is terminated by SIM.
+ *
+ * "data" is NULL
+ */
+#define RIL_UNSOL_STK_SESSION_END 1012
+
+/**
+ * RIL_UNSOL_STK_PROACTIVE_COMMAND
+ *
+ * Indicate when SIM issue a STK proactive command to applications
+ *
+ * "data" is a const char * containing SAT/USAT proactive command
+ * in hexadecimal format string starting with command tag
+ *
+ */
+#define RIL_UNSOL_STK_PROACTIVE_COMMAND 1013
+
+/**
+ * RIL_UNSOL_STK_EVENT_NOTIFY
+ *
+ * Indicate when SIM notifies applcations some event happens.
+ * Generally, application does not need to have any feedback to
+ * SIM but shall be able to indicate appropriate messages to users.
+ *
+ * "data" is a const char * containing SAT/USAT commands or responses
+ * sent by ME to SIM or commands handled by ME, in hexadecimal format string
+ * starting with first byte of response data or command tag
+ *
+ */
+#define RIL_UNSOL_STK_EVENT_NOTIFY 1014
+
+/**
+ * RIL_UNSOL_STK_CALL_SETUP
+ *
+ * Indicate when SIM wants application to setup a voice call.
+ *
+ * "data" is const int *
+ * ((const int *)data)[0] contains timeout value (in milliseconds)
+ */
+#define RIL_UNSOL_STK_CALL_SETUP 1015
+
+/**
+ * RIL_UNSOL_SIM_SMS_STORAGE_FULL
+ *
+ * Indicates that SMS storage on the SIM is full.  Sent when the network
+ * attempts to deliver a new SMS message.  Messages cannot be saved on the
+ * SIM until space is freed.  In particular, incoming Class 2 messages
+ * cannot be stored.
+ *
+ * "data" is null
+ *
+ */
+#define RIL_UNSOL_SIM_SMS_STORAGE_FULL 1016
+
+/**
+ * RIL_UNSOL_SIM_REFRESH
+ *
+ * Indicates that file(s) on the SIM have been updated, or the SIM
+ * has been reinitialized.
+ *
+ * In the case where RIL is version 6 or older:
+ * "data" is an int *
+ * ((int *)data)[0] is a RIL_SimRefreshResult.
+ * ((int *)data)[1] is the EFID of the updated file if the result is
+ * SIM_FILE_UPDATE or NULL for any other result.
+ *
+ * In the case where RIL is version 7:
+ * "data" is a RIL_SimRefreshResponse_v7 *
+ *
+ * Note: If the SIM state changes as a result of the SIM refresh (eg,
+ * SIM_READY -> SIM_LOCKED_OR_ABSENT), RIL_UNSOL_RESPONSE_SIM_STATUS_CHANGED
+ * should be sent.
+ */
+#define RIL_UNSOL_SIM_REFRESH 1017
+
+/**
+ * RIL_UNSOL_CALL_RING
+ *
+ * Ring indication for an incoming call (eg, RING or CRING event).
+ * There must be at least one RIL_UNSOL_CALL_RING at the beginning
+ * of a call and sending multiple is optional. If the system property
+ * ro.telephony.call_ring.multiple is false then the upper layers
+ * will generate the multiple events internally. Otherwise the vendor
+ * ril must generate multiple RIL_UNSOL_CALL_RING if
+ * ro.telephony.call_ring.multiple is true or if it is absent.
+ *
+ * The rate of these events is controlled by ro.telephony.call_ring.delay
+ * and has a default value of 3000 (3 seconds) if absent.
+ *
+ * "data" is null for GSM
+ * "data" is const RIL_CDMA_SignalInfoRecord * if CDMA
+ */
+#define RIL_UNSOL_CALL_RING 1018
+
+/**
+ * RIL_UNSOL_RESPONSE_SIM_STATUS_CHANGED
+ *
+ * Indicates that SIM state changes.
+ *
+ * Callee will invoke RIL_REQUEST_GET_SIM_STATUS on main thread
+
+ * "data" is null
+ */
+#define RIL_UNSOL_RESPONSE_SIM_STATUS_CHANGED 1019
+
+/**
+ * RIL_UNSOL_RESPONSE_CDMA_NEW_SMS
+ *
+ * Called when new CDMA SMS is received
+ *
+ * "data" is const RIL_CDMA_SMS_Message *
+ *
+ * Callee will subsequently confirm the receipt of the SMS with
+ * a RIL_REQUEST_CDMA_SMS_ACKNOWLEDGE
+ *
+ * No new RIL_UNSOL_RESPONSE_CDMA_NEW_SMS should be sent until
+ * RIL_REQUEST_CDMA_SMS_ACKNOWLEDGE has been received
+ *
+ */
+#define RIL_UNSOL_RESPONSE_CDMA_NEW_SMS 1020
+
+/**
+ * RIL_UNSOL_RESPONSE_NEW_BROADCAST_SMS
+ *
+ * Called when new Broadcast SMS is received
+ *
+ * "data" can be one of the following:
+ * If received from GSM network, "data" is const char of 88 bytes
+ * which indicates each page of a CBS Message sent to the MS by the
+ * BTS as coded in 3GPP 23.041 Section 9.4.1.2.
+ * If received from UMTS network, "data" is const char of 90 up to 1252
+ * bytes which contain between 1 and 15 CBS Message pages sent as one
+ * packet to the MS by the BTS as coded in 3GPP 23.041 Section 9.4.2.2.
+ *
+ */
+#define RIL_UNSOL_RESPONSE_NEW_BROADCAST_SMS 1021
+
+/**
+ * RIL_UNSOL_CDMA_RUIM_SMS_STORAGE_FULL
+ *
+ * Indicates that SMS storage on the RUIM is full.  Messages
+ * cannot be saved on the RUIM until space is freed.
+ *
+ * "data" is null
+ *
+ */
+#define RIL_UNSOL_CDMA_RUIM_SMS_STORAGE_FULL 1022
+
+/**
+ * RIL_UNSOL_RESTRICTED_STATE_CHANGED
+ *
+ * Indicates a restricted state change (eg, for Domain Specific Access Control).
+ *
+ * Radio need send this msg after radio off/on cycle no matter it is changed or not.
+ *
+ * "data" is an int *
+ * ((int *)data)[0] contains a bitmask of RIL_RESTRICTED_STATE_* values.
+ */
+#define RIL_UNSOL_RESTRICTED_STATE_CHANGED 1023
+
+/**
+ * RIL_UNSOL_ENTER_EMERGENCY_CALLBACK_MODE
+ *
+ * Indicates that the radio system selection module has
+ * autonomously entered emergency callback mode.
+ *
+ * "data" is null
+ *
+ */
+#define RIL_UNSOL_ENTER_EMERGENCY_CALLBACK_MODE 1024
+
+/**
+ * RIL_UNSOL_CDMA_CALL_WAITING
+ *
+ * Called when CDMA radio receives a call waiting indication.
+ *
+ * "data" is const RIL_CDMA_CallWaiting *
+ *
+ */
+#define RIL_UNSOL_CDMA_CALL_WAITING 1025
+
+/**
+ * RIL_UNSOL_CDMA_OTA_PROVISION_STATUS
+ *
+ * Called when CDMA radio receives an update of the progress of an
+ * OTASP/OTAPA call.
+ *
+ * "data" is const int *
+ *  For CDMA this is an integer OTASP/OTAPA status listed in
+ *  RIL_CDMA_OTA_ProvisionStatus.
+ *
+ */
+#define RIL_UNSOL_CDMA_OTA_PROVISION_STATUS 1026
+
+/**
+ * RIL_UNSOL_CDMA_INFO_REC
+ *
+ * Called when CDMA radio receives one or more info recs.
+ *
+ * "data" is const RIL_CDMA_InformationRecords *
+ *
+ */
+#define RIL_UNSOL_CDMA_INFO_REC 1027
+
+/**
+ * RIL_UNSOL_OEM_HOOK_RAW
+ *
+ * This is for OEM specific use.
+ *
+ * "data" is a byte[]
+ */
+#define RIL_UNSOL_OEM_HOOK_RAW 1028
+
+/**
+ * RIL_UNSOL_RINGBACK_TONE
+ *
+ * Indicates that nework doesn't have in-band information,  need to
+ * play out-band tone.
+ *
+ * "data" is an int *
+ * ((int *)data)[0] == 0 for stop play ringback tone.
+ * ((int *)data)[0] == 1 for start play ringback tone.
+ */
+#define RIL_UNSOL_RINGBACK_TONE 1029
+
+/**
+ * RIL_UNSOL_RESEND_INCALL_MUTE
+ *
+ * Indicates that framework/application need reset the uplink mute state.
+ *
+ * There may be situations where the mute state becomes out of sync
+ * between the application and device in some GSM infrastructures.
+ *
+ * "data" is null
+ */
+#define RIL_UNSOL_RESEND_INCALL_MUTE 1030
+
+/**
+ * RIL_UNSOL_CDMA_SUBSCRIPTION_SOURCE_CHANGED
+ *
+ * Called when CDMA subscription source changed.
+ *
+ * "data" is int *
+ * ((int *)data)[0] is == RIL_CdmaSubscriptionSource
+ */
+#define RIL_UNSOL_CDMA_SUBSCRIPTION_SOURCE_CHANGED 1031
+
+/**
+ * RIL_UNSOL_CDMA_PRL_CHANGED
+ *
+ * Called when PRL (preferred roaming list) changes.
+ *
+ * "data" is int *
+ * ((int *)data)[0] is PRL_VERSION as would be returned by RIL_REQUEST_CDMA_SUBSCRIPTION
+ */
+#define RIL_UNSOL_CDMA_PRL_CHANGED 1032
+
+/**
+ * RIL_UNSOL_EXIT_EMERGENCY_CALLBACK_MODE
+ *
+ * Called when Emergency Callback Mode Ends
+ *
+ * Indicates that the radio system selection module has
+ * proactively exited emergency callback mode.
+ *
+ * "data" is NULL
+ *
+ */
+#define RIL_UNSOL_EXIT_EMERGENCY_CALLBACK_MODE 1033
+
+/**
+ * RIL_UNSOL_RIL_CONNECTED
+ *
+ * Called the ril connects and returns the version
+ *
+ * "data" is int *
+ * ((int *)data)[0] is RIL_VERSION
+ */
+#define RIL_UNSOL_RIL_CONNECTED 1034
+
+/**
+ * RIL_UNSOL_VOICE_RADIO_TECH_CHANGED
+ *
+ * Indicates that voice technology has changed. Contains new radio technology
+ * as a data in the message.
+ *
+ * "data" is int *
+ * ((int *)data)[0] is of type const RIL_RadioTechnology
+ *
+ */
+#define RIL_UNSOL_VOICE_RADIO_TECH_CHANGED 1035
+
+/**
+ * RIL_UNSOL_CELL_INFO_LIST
+ *
+ * Same information as returned by RIL_REQUEST_GET_CELL_INFO_LIST, but returned
+ * at the rate no greater than specified by RIL_REQUEST_SET_UNSOL_CELL_INFO_RATE.
+ *
+ * "data" is NULL
+ *
+ * "response" is an array of RIL_CellInfo.
+ */
+#define RIL_UNSOL_CELL_INFO_LIST 1036
+
+/**
+ * RIL_UNSOL_RESPONSE_IMS_NETWORK_STATE_CHANGED
+ *
+ * Called when IMS registration state has changed
+ *
+ * To get IMS registration state and IMS SMS format, callee needs to invoke the
+ * following request on main thread:
+ *
+ * RIL_REQUEST_IMS_REGISTRATION_STATE
+ *
+ * "data" is NULL
+ *
+ */
+#define RIL_UNSOL_RESPONSE_IMS_NETWORK_STATE_CHANGED 1037
+
+/**
+ * RIL_UNSOL_UICC_SUBSCRIPTION_STATUS_CHANGED
+ *
+ * Indicated when there is a change in subscription status.
+ * This event will be sent in the following scenarios
+ *  - subscription readiness at modem, which was selected by telephony layer
+ *  - when subscription is deactivated by modem due to UICC card removal
+ *  - When network invalidates the subscription i.e. attach reject due to authentication reject
+ *
+ * "data" is const int *
+ * ((const int *)data)[0] == 0 for Subscription Deactivated
+ * ((const int *)data)[0] == 1 for Subscription Activated
+ *
+ */
+#define RIL_UNSOL_UICC_SUBSCRIPTION_STATUS_CHANGED 1038
+
+/**
+ * RIL_UNSOL_SRVCC_STATE_NOTIFY
+ *
+ * Called when Single Radio Voice Call Continuity(SRVCC)
+ * progress state has changed
+ *
+ * "data" is int *
+ * ((int *)data)[0] is of type const RIL_SrvccState
+ *
+ */
+
+#define RIL_UNSOL_SRVCC_STATE_NOTIFY 1039
+
+/**
+ * RIL_UNSOL_HARDWARE_CONFIG_CHANGED
+ *
+ * Called when the hardware configuration associated with the RILd changes
+ *
+ * "data" is an array of RIL_HardwareConfig
+ *
+ */
+#define RIL_UNSOL_HARDWARE_CONFIG_CHANGED 1040
+
+/**
+ * RIL_UNSOL_DC_RT_INFO_CHANGED
+ *
+ * The message is DEPRECATED, use RIL_REQUEST_GET_ACTIVITY_INFO
+ * Sent when the DC_RT_STATE changes but the time
+ * between these messages must not be less than the
+ * value set by RIL_REQUEST_SET_DC_RT_RATE.
+ *
+ * "data" is the most recent RIL_DcRtInfo
+ *
+ */
+#define RIL_UNSOL_DC_RT_INFO_CHANGED 1041
+
+/**
+ * RIL_UNSOL_RADIO_CAPABILITY
+ *
+ * Sent when RIL_REQUEST_SET_RADIO_CAPABILITY completes.
+ * Returns the phone radio capability exactly as
+ * RIL_REQUEST_GET_RADIO_CAPABILITY and should be the
+ * same set as sent by RIL_REQUEST_SET_RADIO_CAPABILITY.
+ *
+ * "data" is the RIL_RadioCapability structure
+ */
+#define RIL_UNSOL_RADIO_CAPABILITY 1042
+
+/*
+ * RIL_UNSOL_ON_SS
+ *
+ * Called when SS response is received when DIAL/USSD/SS is changed to SS by
+ * call control.
+ *
+ * "data" is const RIL_StkCcUnsolSsResponse *
+ *
+ */
+#define RIL_UNSOL_ON_SS 1043
+
+/**
+ * RIL_UNSOL_STK_CC_ALPHA_NOTIFY
+ *
+ * Called when there is an ALPHA from UICC during Call Control.
+ *
+ * "data" is const char * containing ALPHA string from UICC in UTF-8 format.
+ *
+ */
+#define RIL_UNSOL_STK_CC_ALPHA_NOTIFY 1044
+
+ /**
+ * RIL_UNSOL_LCEDATA_RECV
+ *
+ * Called when there is an incoming Link Capacity Estimate (LCE) info report.
+ *
+ * "data" is the RIL_LceDataInfo structure.
+ *
+ */
+#define RIL_UNSOL_LCEDATA_RECV 1045
+
+/* SAMSUNG RESPONSE */
+#define SAMSUNG_UNSOL_RESPONSE_BASE 11000
+
+#define RIL_UNSOL_RELEASE_COMPLETE_MESSAGE 11001
+#define RIL_UNSOL_STK_SEND_SMS_RESULT 11002
+#define RIL_UNSOL_STK_CALL_CONTROL_RESULT 11003
+#define RIL_UNSOL_DUN_CALL_STATUS 11004
+
+#define RIL_UNSOL_O2_HOME_ZONE_INFO 11007
+#define RIL_UNSOL_DEVICE_READY_NOTI 11008
+#define RIL_UNSOL_GPS_NOTI 11009
+#define RIL_UNSOL_AM 11010
+#define RIL_UNSOL_DUN_PIN_CONTROL_SIGNAL 11011
+#define RIL_UNSOL_DATA_SUSPEND_RESUME 11012
+#define RIL_UNSOL_SAP 11013
+
+#define RIL_UNSOL_SIM_SMS_STORAGE_AVAILALE 11015
+#define RIL_UNSOL_HSDPA_STATE_CHANGED 11016
+#define RIL_UNSOL_WB_AMR_STATE 11017
+#define RIL_UNSOL_TWO_MIC_STATE 11018
+#define RIL_UNSOL_DHA_STATE 11019
+#define RIL_UNSOL_UART 11020
+#define RIL_UNSOL_RESPONSE_HANDOVER 11021
+#define RIL_UNSOL_IPV6_ADDR 11022
+#define RIL_UNSOL_NWK_INIT_DISC_REQUEST 11023
+#define RIL_UNSOL_RTS_INDICATION 11024
+#define RIL_UNSOL_OMADM_SEND_DATA 11025
+#define RIL_UNSOL_DUN 11026
+#define RIL_UNSOL_SYSTEM_REBOOT 11027
+#define RIL_UNSOL_VOICE_PRIVACY_CHANGED 11028
+#define RIL_UNSOL_UTS_GETSMSCOUNT 11029
+#define RIL_UNSOL_UTS_GETSMSMSG 11030
+#define RIL_UNSOL_UTS_GET_UNREAD_SMS_STATUS 11031
+#define RIL_UNSOL_MIP_CONNECT_STATUS 11032
+
+/***********************************************************************/
+
+
+#if defined(ANDROID_MULTI_SIM)
+/**
+ * RIL_Request Function pointer
+ *
+ * @param request is one of RIL_REQUEST_*
+ * @param data is pointer to data defined for that RIL_REQUEST_*
+ *        data is owned by caller, and should not be modified or freed by callee
+ * @param t should be used in subsequent call to RIL_onResponse
+ * @param datalen the length of data
+ *
+ */
+typedef void (*RIL_RequestFunc) (int request, void *data,
+                                    size_t datalen, RIL_Token t, RIL_SOCKET_ID socket_id);
+
+/**
+ * This function should return the current radio state synchronously
+ */
+typedef RIL_RadioState (*RIL_RadioStateRequest)(RIL_SOCKET_ID socket_id);
+
+#else
+/* Backward compatible */
+
+/**
+ * RIL_Request Function pointer
+ *
+ * @param request is one of RIL_REQUEST_*
+ * @param data is pointer to data defined for that RIL_REQUEST_*
+ *        data is owned by caller, and should not be modified or freed by callee
+ * @param t should be used in subsequent call to RIL_onResponse
+ * @param datalen the length of data
+ *
+ */
+typedef void (*RIL_RequestFunc) (int request, void *data,
+                                    size_t datalen, RIL_Token t);
+
+/**
+ * This function should return the current radio state synchronously
+ */
+typedef RIL_RadioState (*RIL_RadioStateRequest)();
+
+#endif
+
+
+/**
+ * This function returns "1" if the specified RIL_REQUEST code is
+ * supported and 0 if it is not
+ *
+ * @param requestCode is one of RIL_REQUEST codes
+ */
+
+typedef int (*RIL_Supports)(int requestCode);
+
+/**
+ * This function is called from a separate thread--not the
+ * thread that calls RIL_RequestFunc--and indicates that a pending
+ * request should be cancelled.
+ *
+ * On cancel, the callee should do its best to abandon the request and
+ * call RIL_onRequestComplete with RIL_Errno CANCELLED at some later point.
+ *
+ * Subsequent calls to  RIL_onRequestComplete for this request with
+ * other results will be tolerated but ignored. (That is, it is valid
+ * to ignore the cancellation request)
+ *
+ * RIL_Cancel calls should return immediately, and not wait for cancellation
+ *
+ * Please see ITU v.250 5.6.1 for how one might implement this on a TS 27.007
+ * interface
+ *
+ * @param t token wants to be canceled
+ */
+
+typedef void (*RIL_Cancel)(RIL_Token t);
+
+typedef void (*RIL_TimedCallback) (void *param);
+
+/**
+ * Return a version string for your RIL implementation
+ */
+typedef const char * (*RIL_GetVersion) (void);
+
+typedef struct {
+    int version;        /* set to RIL_VERSION */
+    RIL_RequestFunc onRequest;
+    RIL_RadioStateRequest onStateRequest;
+    RIL_Supports supports;
+    RIL_Cancel onCancel;
+    RIL_GetVersion getVersion;
+} RIL_RadioFunctions;
+
+typedef struct {
+    char *apn;
+    char *protocol;
+    int authtype;
+    char *username;
+    char *password;
+} RIL_InitialAttachApn;
+
+typedef struct {
+    int authContext;            /* P2 value of authentication command, see P2 parameter in
+                                   3GPP TS 31.102 7.1.2 */
+    char *authData;             /* the challenge string in Base64 format, see 3GPP
+                                   TS 31.102 7.1.2 */
+    char *aid;                  /* AID value, See ETSI 102.221 8.1 and 101.220 4,
+                                   NULL if no value. */
+} RIL_SimAuthentication;
+
+#ifdef RIL_SHLIB
+struct RIL_Env {
+    /**
+     * "t" is parameter passed in on previous call to RIL_Notification
+     * routine.
+     *
+     * If "e" != SUCCESS, then response can be null/is ignored
+     *
+     * "response" is owned by caller, and should not be modified or
+     * freed by callee
+     *
+     * RIL_onRequestComplete will return as soon as possible
+     */
+    void (*OnRequestComplete)(RIL_Token t, RIL_Errno e,
+                           void *response, size_t responselen);
+
+#if defined(ANDROID_MULTI_SIM)
+    /**
+     * "unsolResponse" is one of RIL_UNSOL_RESPONSE_*
+     * "data" is pointer to data defined for that RIL_UNSOL_RESPONSE_*
+     *
+     * "data" is owned by caller, and should not be modified or freed by callee
+     */
+    void (*OnUnsolicitedResponse)(int unsolResponse, const void *data, size_t datalen, RIL_SOCKET_ID socket_id);
+#else
+    /**
+     * "unsolResponse" is one of RIL_UNSOL_RESPONSE_*
+     * "data" is pointer to data defined for that RIL_UNSOL_RESPONSE_*
+     *
+     * "data" is owned by caller, and should not be modified or freed by callee
+     */
+    void (*OnUnsolicitedResponse)(int unsolResponse, const void *data, size_t datalen);
+#endif
+    /**
+     * Call user-specifed "callback" function on on the same thread that
+     * RIL_RequestFunc is called. If "relativeTime" is specified, then it specifies
+     * a relative time value at which the callback is invoked. If relativeTime is
+     * NULL or points to a 0-filled structure, the callback will be invoked as
+     * soon as possible
+     */
+
+    void (*RequestTimedCallback) (RIL_TimedCallback callback,
+                                   void *param, const struct timeval *relativeTime);
+};
+
+
+/**
+ *  RIL implementations must defined RIL_Init
+ *  argc and argv will be command line arguments intended for the RIL implementation
+ *  Return NULL on error
+ *
+ * @param env is environment point defined as RIL_Env
+ * @param argc number of arguments
+ * @param argv list fo arguments
+ *
+ */
+const RIL_RadioFunctions *RIL_Init(const struct RIL_Env *env, int argc, char **argv);
+
+#else /* RIL_SHLIB */
+
+/**
+ * Call this once at startup to register notification routine
+ *
+ * @param callbacks user-specifed callback function
+ */
+void RIL_register (const RIL_RadioFunctions *callbacks);
+
+
+/**
+ *
+ * RIL_onRequestComplete will return as soon as possible
+ *
+ * @param t is parameter passed in on previous call to RIL_Notification
+ *          routine.
+ * @param e error code
+ *          if "e" != SUCCESS, then response can be null/is ignored
+ * @param response is owned by caller, and should not be modified or
+ *                 freed by callee
+ * @param responselen the length of response in byte
+ */
+void RIL_onRequestComplete(RIL_Token t, RIL_Errno e,
+                           void *response, size_t responselen);
+
+#if defined(ANDROID_MULTI_SIM)
+/**
+ * @param unsolResponse is one of RIL_UNSOL_RESPONSE_*
+ * @param data is pointer to data defined for that RIL_UNSOL_RESPONSE_*
+ *     "data" is owned by caller, and should not be modified or freed by callee
+ * @param datalen the length of data in byte
+ */
+
+void RIL_onUnsolicitedResponse(int unsolResponse, const void *data,
+                                size_t datalen, RIL_SOCKET_ID socket_id);
+#else
+/**
+ * @param unsolResponse is one of RIL_UNSOL_RESPONSE_*
+ * @param data is pointer to data defined for that RIL_UNSOL_RESPONSE_*
+ *     "data" is owned by caller, and should not be modified or freed by callee
+ * @param datalen the length of data in byte
+ */
+
+void RIL_onUnsolicitedResponse(int unsolResponse, const void *data,
+                                size_t datalen);
+#endif
+
+/**
+ * Call user-specifed "callback" function on on the same thread that
+ * RIL_RequestFunc is called. If "relativeTime" is specified, then it specifies
+ * a relative time value at which the callback is invoked. If relativeTime is
+ * NULL or points to a 0-filled structure, the callback will be invoked as
+ * soon as possible
+ *
+ * @param callback user-specifed callback function
+ * @param param parameter list
+ * @param relativeTime a relative time value at which the callback is invoked
+ */
+
+void RIL_requestTimedCallback (RIL_TimedCallback callback,
+                               void *param, const struct timeval *relativeTime);
+
+
+#endif /* RIL_SHLIB */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*ANDROID_RIL_H*/
diff --git a/selinux/device.te b/selinux/device.te
deleted file mode 100644
index c95050b..0000000
--- a/selinux/device.te
+++ /dev/null
@@ -1,4 +0,0 @@
-type mali_device, dev_type, mlstrustedobject;
-type rfkill_device, dev_type;
-type diagnostic_device, dev_type;
-type efs_block_device, dev_type;
diff --git a/selinux/dhcp.te b/selinux/dhcp.te
deleted file mode 100755
index c403b9b..0000000
--- a/selinux/dhcp.te
+++ /dev/null
@@ -1 +0,0 @@
-allow dhcp self:rawip_socket { create write setopt };
diff --git a/selinux/domain.te b/selinux/domain.te
deleted file mode 100644
index 1be0633..0000000
--- a/selinux/domain.te
+++ /dev/null
@@ -1,4 +0,0 @@
-## /dev/mali, /dev/ump
-allow domain mali_device:chr_file rw_file_perms;
-
-
diff --git a/selinux/file.te b/selinux/file.te
deleted file mode 100644
index 185b1c2..0000000
--- a/selinux/file.te
+++ /dev/null
@@ -1,9 +0,0 @@
-type radio_efs_file, fs_type;
-
-type firmware_mfc, file_type;
-type firmware_camera, file_type;
-
-type qmuxd_socket, file_type;
-type kickstart_data_file, file_type, data_file_type;
-type sensors_data_file, file_type, data_file_type;
-type volume_data_file, file_type, data_file_type;
diff --git a/selinux/file_contexts b/selinux/file_contexts
deleted file mode 100644
index 36dc14c..0000000
--- a/selinux/file_contexts
+++ /dev/null
@@ -1,70 +0,0 @@
-# GFX
-/dev/mali                               u:object_r:mali_device:s0
-/dev/ump                                u:object_r:mali_device:s0
-/dev/fimg2d                             u:object_r:mali_device:s0
-
-# RIL
-/dev/mdm                                u:object_r:radio_device:s0
-/dev/hsicctl[0-3]*                      u:object_r:radio_device:s0
-/dev/ttyUSB0                            u:object_r:radio_device:s0
-/dev/diag                               u:object_r:diagnostic_device:s0
-
-# GPS
-/dev/ttySAC1                            u:object_r:gps_device:s0
-
-# Bluetooth
-/dev/ttySAC0                            u:object_r:hci_attach_dev:s0
-/efs/bluetooth(/.*)?                    u:object_r:bluetooth_data_file:s0
-
-# Sensors
-/dev/akm8975                            u:object_r:sensors_device:s0
-/efs/gyro_cal_data                      u:object_r:sensors_data_file:s0
-
-# Camera
-/data/ISP_CV                            u:object_r:camera_data_file:s0
-/dev/exynos-mem                         u:object_r:video_device:s0
-
-# for wpa_supp
-/dev/rfkill                             u:object_r:rfkill_device:s0
-
-# Firmwares
-/system/vendor/firmware(/.*)?           u:object_r:firmware_camera:s0
-/system/vendor/firmware/mfc_fw.bin      u:object_r:firmware_mfc:s0
-/system/vendor/firmware/fimc_is_fw.bin  u:object_r:firmware_camera:s0
-/data/cfw(/.*)?                         u:object_r:firmware_camera:s0
-/tombstones                             u:object_r:system_data_file:s0
-/tombstones(/.*)?                       u:object_r:tombstone_data_file:s0
-/tombstones/qcks(/.*)?                  u:object_r:kickstart_data_file:s0
-
-# Vibrator
-/dev/tspdrv                             u:object_r:input_device:s0
-
-# Wifi
-/efs/wifi/.mac.info                     u:object_r:wifi_data_file:s0
-
-# Sec-ril
-/efs/FactoryApp/keystr                  u:object_r:efs_file:s0
-/efs/FactoryApp/factorymode             u:object_r:efs_file:s0
-/efs/FactoryApp/serial_no               u:object_r:efs_file:s0
-/data/misc/radio/ramdumpmode.txt        u:object_r:radio_data_file:s0
-/data/misc/radio/dlnk                   u:object_r:radio_data_file:s0
-
-# Binaries
-/system/bin/qmuxd                u:object_r:qmux_exec:s0
-/system/bin/efsks                u:object_r:kickstart_exec:s0
-/system/bin/ks                   u:object_r:kickstart_exec:s0
-/system/bin/qcks                 u:object_r:kickstart_exec:s0
-
-# Sockets
-/dev/socket/qmux_audio(/.*)?     u:object_r:qmuxd_socket:s0
-/dev/socket/qmux_bluetooth(/.*)? u:object_r:qmuxd_socket:s0
-/dev/socket/qmux_gps(/.*)?       u:object_r:qmuxd_socket:s0
-/dev/socket/qmux_radio(/.*)?     u:object_r:qmuxd_socket:s0
-
-# Block devices
-/dev/block/mmcblk0p[3-6]*       u:object_r:efs_block_device:s0
-/dev/block/mmcblk0p10           u:object_r:efs_block_device:s0
-/dev/block/mmcblk0p11           u:object_r:efs_block_device:s0
-
-# Audio related
-/data/local/audio(/.*)?         u:object_r:volume_data_file:s0
diff --git a/selinux/init.te b/selinux/init.te
deleted file mode 100644
index 2f29889..0000000
--- a/selinux/init.te
+++ /dev/null
@@ -1,3 +0,0 @@
-allow init wpa_socket:unix_dgram_socket { bind create };
-
-
diff --git a/selinux/kickstart.te b/selinux/kickstart.te
deleted file mode 100755
index 14e1ad5..0000000
--- a/selinux/kickstart.te
+++ /dev/null
@@ -1,44 +0,0 @@
-# kickstart processes and scripts
-type kickstart, domain;
-type kickstart_exec, exec_type, file_type;
-
-# kickstart_checker.sh talks to init over the property socket
-unix_socket_connect(kickstart, property, init)
-
-# Start /system/bin/qcks from init
-init_daemon_domain(kickstart)
-
-# Spawn /system/bin/efsks and /system/bin/ks
-allow kickstart kickstart_exec:file { open execute_no_trans getattr };
-
-# Run dd on m9kefs[123] block devices; write to /data/qcks/
-# Run cat on firmware and m9kefs[123] data; write to /data/qcks/
-allow kickstart efs_block_device:blk_file rw_file_perms;
-allow kickstart kickstart_data_file:file create_file_perms;
-allow kickstart kickstart_data_file:dir rw_dir_perms;
-allow kickstart radio_efs_file:file r_file_perms;
-allow kickstart radio_efs_file:dir search;
-
-# Let qcks access /dev/mdm node (modem driver)
-allow kickstart radio_device:chr_file rw_file_perms;
-
-# Allow /dev/ttyUSB0 access
-allow kickstart radio_device:chr_file { write ioctl getattr };
-
-# Allow to run toolbox commands
-allow kickstart shell_exec:file rx_file_perms;
-# Toolbox commands for firmware dd
-allow kickstart system_file:file execute_no_trans;
-
-# Access to /dev/block/platform/msm_sdcc.1/by-name/m9kefs2
-allow kickstart block_device:dir { getattr write search };
-
-# Set system property key
-allow kickstart radio_prop:property_service set;
-
-allow kickstart shell_exec:file entrypoint;
-# ls on /data/qcks/
-allow kickstart self:capability { dac_override setuid };
-
-# XXX Label sysfs files with a specific type?
-allow kickstart sysfs:file rw_file_perms;
\ No newline at end of file
diff --git a/selinux/mediaserver.te b/selinux/mediaserver.te
deleted file mode 100644
index 35dce7b..0000000
--- a/selinux/mediaserver.te
+++ /dev/null
@@ -1,8 +0,0 @@
-qmux_socket(mediaserver)
-allow mediaserver self:socket create_socket_perms;
-allow mediaserver { firmware_camera }:file r_file_perms;
-allow mediaserver firmware_camera:dir r_dir_perms;
-allow mediaserver camera_data_file:file rw_file_perms;
-
-# Bluetooth audio
-allow mediaserver bluetooth:unix_stream_socket { connectto };
diff --git a/selinux/netmgrd.te b/selinux/netmgrd.te
deleted file mode 100755
index 11159a4..0000000
--- a/selinux/netmgrd.te
+++ /dev/null
@@ -1,29 +0,0 @@
-# Network utilities (radio process)
-type netmgrd, domain;
-type netmgrd_exec, exec_type, file_type;
-
-# Started by init
-init_daemon_domain(netmgrd)
-
-allow netmgrd self:udp_socket { create ioctl };
-# fsetid, dac_override unlink on /dev/socket/qmux_radio/qmux_client_socket
-allow netmgrd self:capability { sys_module fsetid setuid setgid net_admin net_raw dac_override };
-allow netmgrd self:packet_socket { write bind read create };
-allow netmgrd self:netlink_socket { write read create bind setopt };
-allow netmgrd self:netlink_route_socket { create bind read write nlmsg_read nlmsg_write setopt getattr };
-allow netmgrd kernel:system module_request;
-
-# Talk to qmuxd
-qmux_socket(netmgrd)
-
-# Allow logging diagnostic items
-allow netmgrd diagnostic_device:chr_file rw_file_perms;
-
-# /data/data_test/ access with shell
-allow netmgrd shell_exec:file { execute read open execute_no_trans };
-allow netmgrd system_file:file { execute_no_trans };
-
-# Talk to init over the property socket
-unix_socket_connect(netmgrd, property, init)
-# Set net.rmnet_usb0. values
-allow netmgrd radio_prop:property_service set;
diff --git a/selinux/qmux.te b/selinux/qmux.te
deleted file mode 100755
index e2a5bbf..0000000
--- a/selinux/qmux.te
+++ /dev/null
@@ -1,21 +0,0 @@
-# Qualcomm Management Interface Multiplexer
-type qmux, domain;
-type qmux_exec, exec_type, file_type;
-
-# Started by init
-init_daemon_domain(qmux)
-
-# Create local qmux_connect_socket
-allow qmux qmuxd_socket:dir w_dir_perms;
-allow qmux qmuxd_socket:sock_file { create setattr getattr unlink };
-
-# /dev/hsicctl* node access
-allow qmux radio_device:chr_file rw_file_perms;
-
-# Allow logging diagnostic items
-allow qmux diagnostic_device:chr_file rw_file_perms;
-
-allow qmux self:capability { dac_override setuid };
-
-# XXX Should we label with own type
-allow qmux sysfs:file { open write append read getattr };
diff --git a/selinux/rild.te b/selinux/rild.te
deleted file mode 100755
index 04209b0..0000000
--- a/selinux/rild.te
+++ /dev/null
@@ -1,14 +0,0 @@
-## RIL
-allow rild radio_device:chr_file rw_file_perms;
-allow rild { efs_file }:file rw_file_perms;
-allow rild self:netlink_socket { create bind read write };
-allow rild self:netlink_route_socket { write };
-
-# Talk to qmuxd
-qmux_socket(rild)
-
-# Allow logging diagnostic items
-allow rild diagnostic_device:chr_file rw_file_perms;
-
-# XXX label with own type?
-allow rild sysfs:file { read open write getattr };
diff --git a/selinux/secril.te b/selinux/secril.te
deleted file mode 100644
index 7761d80..0000000
--- a/selinux/secril.te
+++ /dev/null
@@ -1,25 +0,0 @@
-# sec-ril
-type secril-daemon, domain;
-type secril-daemon_exec, exec_type, file_type;
-
-# Start /system/bin/sec-ril from init
-init_daemon_domain(secril-daemon)
-
-allow secril-daemon secril-daemon_exec:file { open execute_no_trans getattr };
-allow secril-daemon self:udp_socket { create ioctl };
-unix_socket_connect(secril-daemon, property, init)
-unix_socket_connect(secril-daemon, rild, rild)
-
-allow secril-daemon { efs_file }:file rw_file_perms;
-allow secril-daemon system_data_file:dir create_dir_perms;
-allow secril-daemon system_data_file:file unlink;
-allow secril-daemon radio_data_file:file { create_file_perms };
-allow secril-daemon kernel:system module_request;
-allow secril-daemon self:capability { sys_module fsetid setuid setgid net_admin net_raw dac_override };
-allow secril-daemon system_file:file x_file_perms;
-allow secril-daemon sysfs:file rw_file_perms;
-allow secril-daemon shell_exec:file rx_file_perms;
-allow secril-daemon app_data_file:file rw_file_perms;
-allow secril-daemon app_data_file:dir search;
-allow secril-daemon zygote_exec:file rx_file_perms;
-allow secril-daemon ashmem_device:chr_file x_file_perms;
\ No newline at end of file
diff --git a/selinux/system.te b/selinux/system.te
deleted file mode 100755
index bc8212b..0000000
--- a/selinux/system.te
+++ /dev/null
@@ -1,12 +0,0 @@
-# Talk to qmuxd
-qmux_socket(system)
-
-allow system diagnostic_device:chr_file rw_file_perms;
-allow system sensors_device:chr_file { read open };
-allow system sensors_data_file:file r_file_perms;
-allow system wpa_socket:unix_dgram_socket sendto;
-allow system_app volume_data_file:file { read write open getattr };
-
-allow system sysfs:file { read open write };
-allow system self:capability { sys_module };
-
diff --git a/selinux/te_macros b/selinux/te_macros
deleted file mode 100755
index 274fd55..0000000
--- a/selinux/te_macros
+++ /dev/null
@@ -1,12 +0,0 @@
-#####################################
-# qmux_socket(clientdomain)
-# Allow client to send via a local
-# socket to the qmux domain.
-define(`qmux_socket', `
-type $1_qmuxd_socket, file_type;
-file_type_auto_trans($1, qmuxd_socket, $1_qmuxd_socket)
-unix_socket_connect($1, qmuxd, qmux)
-allow qmux $1_qmuxd_socket:sock_file { getattr unlink };
-')
-
-
diff --git a/selinux/ueventd.te b/selinux/ueventd.te
deleted file mode 100644
index fd1852b..0000000
--- a/selinux/ueventd.te
+++ /dev/null
@@ -1,11 +0,0 @@
-# Drivers read firmware files /firmware/image
-allow ueventd { radio_efs_file }:file r_file_perms;
-allow ueventd { radio_efs_file }:dir search;
-
-# MFC firmware
-allow ueventd { firmware_mfc }:file r_file_perms;
-
-# Camera related firmwares
-allow ueventd { firmware_camera }:dir search;
-allow ueventd { firmware_camera }:file r_file_perms;
-
diff --git a/selinux/wpa_supplicant.te b/selinux/wpa_supplicant.te
deleted file mode 100755
index ab5fb24..0000000
--- a/selinux/wpa_supplicant.te
+++ /dev/null
@@ -1,10 +0,0 @@
-allow wpa init:unix_dgram_socket { read write };
-
-# logwrapper used with wpa_supplicant
-allow wpa devpts:chr_file { read write };
-
-allow wpa wpa_socket:unix_dgram_socket { read write };
-allow wpa_socket system:unix_dgram_socket sendto;
-
-allow wpa_socket wifi_data_file:sock_file unlink;
-allow wpa rfkill_device:chr_file rw_file_perms;
\ No newline at end of file