# Portions Copyright (C) 2012 VMware, Inc. All Rights Reserved. # Copyright (C) 2010 The Android Open Source Project # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. # This file is the device-specific product definition file for # crespo. It lists all the overlays, files, modules and properties # that are specific to this hardware: i.e. those are device-specific # drivers, configuration files, settings, etc... # Note that crespo is not a fully open device. Some of the drivers # aren't publicly available in all circumstances, which means that some # of the hardware capabilities aren't present in builds where those # drivers aren't available. Such cases are handled by having this file # separated into two halves: this half here contains the parts that # are available to everyone, while another half in the vendor/ hierarchy # augments that set with the parts that are only relevant when all the # associated drivers are available. Aspects that are irrelevant but # harmless in no-driver builds should be kept here for simplicity and # transparency. There are two variants of the half that deals with # the unavailable drivers: one is directly checked into the unreleased # vendor tree and is used by engineers who have access to it. The other # is generated by setup-makefile.sh in the same directory as this files, # and is used by people who have access to binary versions of the drivers # but not to the original vendor tree. Be sure to update both. # These is the hardware-specific overlay, which points to the location # of hardware-specific resource overrides, typically the frameworks and # application settings that are stored in resourced. DEVICE_PACKAGE_OVERLAYS += device/samsung/crespo/overlay # These are the hardware-specific configuration files PRODUCT_COPY_FILES := \ device/samsung/crespo/vold.fstab:system/etc/vold.fstab # Init files PRODUCT_COPY_FILES += \ device/samsung/crespo/init.herring.rc:root/init.herring.rc \ device/samsung/crespo/init.herring.usb.rc:root/init.herring.usb.rc \ device/samsung/crespo/fstab.herring:root/fstab.herring \ device/samsung/crespo/ueventd.herring.rc:root/ueventd.herring.rc # Prebuilt kl and kcm keymaps PRODUCT_COPY_FILES += \ device/samsung/crespo/s3c-keypad.kl:system/usr/keylayout/s3c-keypad.kl \ device/samsung/crespo/s3c-keypad.kcm:system/usr/keychars/s3c-keypad.kcm \ device/samsung/crespo/herring-keypad.kl:system/usr/keylayout/herring-keypad.kl \ device/samsung/crespo/herring-keypad.kcm:system/usr/keychars/herring-keypad.kcm \ device/samsung/crespo/cypress-touchkey.kl:system/usr/keylayout/cypress-touchkey.kl \ device/samsung/crespo/cypress-touchkey.kcm:system/usr/keychars/cypress-touchkey.kcm \ device/samsung/crespo/sec_jack.kl:system/usr/keylayout/sec_jack.kl \ device/samsung/crespo/sec_jack.kcm:system/usr/keychars/sec_jack.kcm \ device/samsung/crespo/mxt224_ts_input.kl:system/usr/keylayout/mxt224_ts_input.kl \ device/samsung/crespo/mxt224_ts_input.kcm:system/usr/keychars/mxt224_ts_input.kcm # NFC PRODUCT_PACKAGES += \ libnfc \ libnfc_jni \ Nfc \ Tag # Commands to migrate prefs from com.android.nfc3 to com.android.nfc PRODUCT_COPY_FILES += \ packages/apps/Nfc/migrate_nfc.txt:system/etc/updatecmds/migrate_nfc.txt # file that declares the MIFARE NFC constant PRODUCT_COPY_FILES += \ frameworks/native/data/etc/com.nxp.mifare.xml:system/etc/permissions/com.nxp.mifare.xml # NFC EXTRAS add-on API PRODUCT_PACKAGES += \ com.android.nfc_extras PRODUCT_COPY_FILES += \ frameworks/native/data/etc/com.android.nfc_extras.xml:system/etc/permissions/com.android.nfc_extras.xml # NFCEE access control ifeq ($(TARGET_BUILD_VARIANT),user) NFCEE_ACCESS_PATH := device/samsung/crespo/nfcee_access.xml else NFCEE_ACCESS_PATH := device/samsung/crespo/nfcee_access_debug.xml endif PRODUCT_COPY_FILES += \ $(NFCEE_ACCESS_PATH):system/etc/nfcee_access.xml # Generated kcm keymaps PRODUCT_PACKAGES += \ s3c-keypad.kcm \ cypress-touchkey.kcm # Filesystem management tools PRODUCT_PACKAGES += \ make_ext4fs \ setup_fs PRODUCT_CHARACTERISTICS := nosdcard # These are the OpenMAX IL configuration files PRODUCT_COPY_FILES += \ device/samsung/crespo/sec_mm/sec_omx/sec_omx_core/secomxregistry:system/etc/secomxregistry \ device/samsung/crespo/media_profiles.xml:system/etc/media_profiles.xml \ device/samsung/crespo/media_codecs.xml:system/etc/media_codecs.xml # These are the OpenMAX IL modules PRODUCT_PACKAGES += \ libSEC_OMX_Core \ libOMX.SEC.AVC.Decoder \ libOMX.SEC.M4V.Decoder \ libOMX.SEC.M4V.Encoder \ libOMX.SEC.AVC.Encoder # Misc other modules PRODUCT_PACKAGES += \ lights.s5pc110 \ hwcomposer.s5pc110 \ sensors.herring \ power.s5pc110 # Torch PRODUCT_PACKAGES += \ Torch # Camera PRODUCT_PACKAGES += \ camera.herring # audio PRODUCT_PACKAGES += \ audio_policy.herring \ audio.primary.herring \ audio.a2dp.default \ audio.usb.default PRODUCT_COPY_FILES += \ device/samsung/crespo/libaudio/audio_policy.conf:system/etc/audio_policy.conf # NFC PRODUCT_PACKAGES += \ nfc.herring # Libs PRODUCT_PACKAGES += \ libcamera \ libstagefrighthw \ com.android.future.usb.accessory # Input device calibration files PRODUCT_COPY_FILES += \ device/samsung/crespo/mxt224_ts_input.idc:system/usr/idc/mxt224_ts_input.idc # Device app PRODUCT_PACKAGES += \ CrespoParts # for bugmailer PRODUCT_PACKAGES += send_bug PRODUCT_COPY_FILES += \ system/extras/bugmailer/bugmailer.sh:system/bin/bugmailer.sh \ system/extras/bugmailer/send_bug:system/bin/send_bug # These are the hardware-specific features PRODUCT_COPY_FILES += \ frameworks/native/data/etc/handheld_core_hardware.xml:system/etc/permissions/handheld_core_hardware.xml \ frameworks/native/data/etc/android.hardware.camera.flash-autofocus.xml:system/etc/permissions/android.hardware.camera.flash-autofocus.xml \ frameworks/native/data/etc/android.hardware.camera.front.xml:system/etc/permissions/android.hardware.camera.front.xml \ frameworks/native/data/etc/android.hardware.location.gps.xml:system/etc/permissions/android.hardware.location.gps.xml \ frameworks/native/data/etc/android.hardware.wifi.xml:system/etc/permissions/android.hardware.wifi.xml \ frameworks/native/data/etc/android.hardware.sensor.proximity.xml:system/etc/permissions/android.hardware.sensor.proximity.xml \ frameworks/native/data/etc/android.hardware.sensor.light.xml:system/etc/permissions/android.hardware.sensor.light.xml \ frameworks/native/data/etc/android.hardware.sensor.gyroscope.xml:system/etc/permissions/android.hardware.sensor.gyroscope.xml \ frameworks/native/data/etc/android.hardware.touchscreen.multitouch.jazzhand.xml:system/etc/permissions/android.hardware.touchscreen.multitouch.jazzhand.xml \ frameworks/native/data/etc/android.hardware.nfc.xml:system/etc/permissions/android.hardware.nfc.xml \ frameworks/native/data/etc/android.software.sip.voip.xml:system/etc/permissions/android.software.sip.voip.xml \ frameworks/native/data/etc/android.hardware.usb.accessory.xml:system/etc/permissions/android.hardware.usb.accessory.xml # The OpenGL ES API level that is natively supported by this device. # This is a 16.16 fixed point number PRODUCT_PROPERTY_OVERRIDES := \ ro.opengles.version=131072 # These are the hardware-specific settings that are stored in system properties. # Note that the only such settings should be the ones that are too low-level to # be reachable from resources or other mechanisms. PRODUCT_PROPERTY_OVERRIDES += \ wifi.interface=wlan0 # Set default USB interface PRODUCT_DEFAULT_PROPERTY_OVERRIDES += \ persist.sys.usb.config=mass_storage include frameworks/native/build/phone-hdpi-512-dalvik-heap.mk # we have enough storage space to hold precise GC data PRODUCT_TAGS += dalvik.gc.type-precise # Screen size is "normal", density is "hdpi" PRODUCT_AAPT_CONFIG := normal hdpi $(call inherit-product-if-exists, vendor/nxp/pn544/nxp-pn544-fw-vendor.mk) WIFI_BAND := 802_11_BG $(call inherit-product-if-exists, hardware/broadcom/wlan/bcmdhd/firmware/bcm4329/device-bcm.mk)