# Copyright (C) 2010 The Android Open Source Project # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. # This file is the device-specific product definition file for # crespo. It lists all the overlays, files, modules and properties # that are specific to this hardware: i.e. those are device-specific # drivers, configuration files, settings, etc... # Note that crespo is not a fully open device. Some of the drivers # aren't publicly available in all circumstances, which means that some # of the hardware capabilities aren't present in builds where those # drivers aren't available. Such cases are handled by having this file # separated into two halves: this half here contains the parts that # are available to everyone, while another half in the vendor/ hierarchy # augments that set with the parts that are only relevant when all the # associated drivers are available. Aspects that are irrelevant but # harmless in no-driver builds should be kept here for simplicity and # transparency. There are two variants of the half that deals with # the unavailable drivers: one is directly checked into the unreleased # vendor tree and is used by engineers who have access to it. The other # is generated by setup-makefile.sh in the same directory as this files, # and is used by people who have access to binary versions of the drivers # but not to the original vendor tree. Be sure to update both. # These is the hardware-specific overlay, which points to the location # of hardware-specific resource overrides, typically the frameworks and # application settings that are stored in resourced. DEVICE_PACKAGE_OVERLAYS := device/samsung/crespo/overlay # These are the hardware-specific configuration files PRODUCT_COPY_FILES := \ device/samsung/crespo/asound.conf:system/etc/asound.conf \ device/samsung/crespo/vold.fstab:system/etc/vold.fstab \ device/samsung/crespo/egl.cfg:system/lib/egl/egl.cfg # Init files PRODUCT_COPY_FILES += \ device/samsung/crespo/init.herring.rc:root/init.herring.rc \ device/samsung/crespo/ueventd.herring.rc:root/ueventd.herring.rc # Prebuilt kl keymaps PRODUCT_COPY_FILES += \ device/samsung/crespo/s3c-keypad.kl:system/usr/keylayout/s3c-keypad.kl \ device/samsung/crespo/cypress-touchkey.kl:system/usr/keylayout/cypress-touchkey.kl \ device/samsung/crespo/sec_jack.kl:system/usr/keylayout/sec_jack.kl # Generated kcm keymaps PRODUCT_PACKAGES := \ s3c-keypad.kcm \ cypress-touchkey.kcm # Filesystem management tools PRODUCT_PACKAGES += \ make_ext4fs \ setup_fs PRODUCT_CHARACTERISTICS := nosdcard # ALSA configuration files PRODUCT_COPY_FILES += \ device/samsung/crespo/alsa-lib/src/conf/alsa.conf:system/usr/share/alsa/alsa.conf \ device/samsung/crespo/alsa-lib/src/conf/cards/aliases.conf:system/usr/share/alsa/cards/aliases.conf \ device/samsung/crespo/alsa-lib/src/conf/pcm/center_lfe.conf:system/usr/share/alsa/pcm/center_lfe.conf \ device/samsung/crespo/alsa-lib/src/conf/pcm/default.conf:system/usr/share/alsa/pcm/default.conf \ device/samsung/crespo/alsa-lib/src/conf/pcm/dmix.conf:system/usr/share/alsa/pcm/dmix.conf \ device/samsung/crespo/alsa-lib/src/conf/pcm/dpl.conf:system/usr/share/alsa/pcm/dpl.conf \ device/samsung/crespo/alsa-lib/src/conf/pcm/dsnoop.conf:system/usr/share/alsa/pcm/dsnoop.conf \ device/samsung/crespo/alsa-lib/src/conf/pcm/front.conf:system/usr/share/alsa/pcm/front.conf \ device/samsung/crespo/alsa-lib/src/conf/pcm/iec958.conf:system/usr/share/alsa/pcm/iec958.conf \ device/samsung/crespo/alsa-lib/src/conf/pcm/modem.conf:system/usr/share/alsa/pcm/modem.conf \ device/samsung/crespo/alsa-lib/src/conf/pcm/rear.conf:system/usr/share/alsa/pcm/rear.conf \ device/samsung/crespo/alsa-lib/src/conf/pcm/side.conf:system/usr/share/alsa/pcm/side.conf \ device/samsung/crespo/alsa-lib/src/conf/pcm/surround40.conf:system/usr/share/alsa/pcm/surround40.conf \ device/samsung/crespo/alsa-lib/src/conf/pcm/surround41.conf:system/usr/share/alsa/pcm/surround41.conf \ device/samsung/crespo/alsa-lib/src/conf/pcm/surround50.conf:system/usr/share/alsa/pcm/surround50.conf \ device/samsung/crespo/alsa-lib/src/conf/pcm/surround51.conf:system/usr/share/alsa/pcm/surround51.conf \ device/samsung/crespo/alsa-lib/src/conf/pcm/surround71.conf:system/usr/share/alsa/pcm/surround71.conf # These are the OpenMAX IL configuration files PRODUCT_COPY_FILES += \ device/samsung/crespo/sec_mm/sec_omx/sec_omx_core/secomxregistry:system/etc/secomxregistry \ device/samsung/crespo/media_profiles.xml:system/etc/media_profiles.xml # These are the OpenMAX IL modules PRODUCT_PACKAGES += \ libSEC_OMX_Core \ libOMX.SEC.AVC.Decoder \ libOMX.SEC.M4V.Decoder \ libOMX.SEC.M4V.Encoder \ libOMX.SEC.AVC.Encoder # Misc other modules PRODUCT_PACKAGES += \ lights.s5pc110 \ overlay.s5pc110 \ sensors.herring # Libs PRODUCT_PACKAGES += \ libcamera \ libstagefrighthw # NFC PRODUCT_PACKAGES += \ libnfc \ libnfc_jni \ Nfc \ Tag # Input device calibration files PRODUCT_COPY_FILES += \ device/samsung/crespo/mxt224_ts_input.idc:system/usr/idc/mxt224_ts_input.idc # These are the hardware-specific features PRODUCT_COPY_FILES += \ frameworks/base/data/etc/handheld_core_hardware.xml:system/etc/permissions/handheld_core_hardware.xml \ frameworks/base/data/etc/android.hardware.camera.flash-autofocus.xml:system/etc/permissions/android.hardware.camera.flash-autofocus.xml \ frameworks/base/data/etc/android.hardware.camera.front.xml:system/etc/permissions/android.hardware.camera.front.xml \ frameworks/base/data/etc/android.hardware.telephony.gsm.xml:system/etc/permissions/android.hardware.telephony.gsm.xml \ frameworks/base/data/etc/android.hardware.location.gps.xml:system/etc/permissions/android.hardware.location.gps.xml \ frameworks/base/data/etc/android.hardware.wifi.xml:system/etc/permissions/android.hardware.wifi.xml \ frameworks/base/data/etc/android.hardware.sensor.proximity.xml:system/etc/permissions/android.hardware.sensor.proximity.xml \ frameworks/base/data/etc/android.hardware.sensor.light.xml:system/etc/permissions/android.hardware.sensor.light.xml \ frameworks/base/data/etc/android.hardware.sensor.gyroscope.xml:system/etc/permissions/android.hardware.sensor.gyroscope.xml \ frameworks/base/data/etc/android.hardware.touchscreen.multitouch.jazzhand.xml:system/etc/permissions/android.hardware.touchscreen.multitouch.jazzhand.xml \ frameworks/base/data/etc/android.hardware.nfc.xml:system/etc/permissions/android.hardware.nfc.xml \ frameworks/base/data/etc/android.software.sip.voip.xml:system/etc/permissions/android.software.sip.voip.xml \ packages/wallpapers/LivePicker/android.software.live_wallpaper.xml:system/etc/permissions/android.software.live_wallpaper.xml # The OpenGL ES API level that is natively supported by this device. # This is a 16.16 fixed point number PRODUCT_PROPERTY_OVERRIDES := \ ro.opengles.version=131072 # These are the hardware-specific settings that are stored in system properties. # Note that the only such settings should be the ones that are too low-level to # be reachable from resources or other mechanisms. PRODUCT_PROPERTY_OVERRIDES += \ wifi.interface=eth0 \ wifi.supplicant_scan_interval=15 \ dalvik.vm.heapsize=32m # we have enough storage space to hold precise GC data PRODUCT_TAGS += dalvik.gc.type-precise # Screen density is actually considered a locale (since it is taken into account # the the build-time selection of resources). The product definitions including # this file must pay attention to the fact that the first entry in the final # PRODUCT_LOCALES expansion must not be a density. PRODUCT_LOCALES := hdpi PRODUCT_COPY_FILES += \ device/samsung/crespo/bcm4329.ko:system/modules/bcm4329.ko ifeq ($(TARGET_PREBUILT_KERNEL),) LOCAL_KERNEL := device/samsung/crespo/kernel else LOCAL_KERNEL := $(TARGET_PREBUILT_KERNEL) endif PRODUCT_COPY_FILES += \ $(LOCAL_KERNEL):kernel # See comment at the top of this file. This is where the other # half of the device-specific product definition file takes care # of the aspects that require proprietary drivers that aren't # commonly available $(call inherit-product-if-exists, vendor/samsung/crespo/device-vendor.mk)