function hmm() { cat <- - tapas: tapas [ ...] [arm|x86|mips|armv5|arm64|x86_64|mips64] [eng|userdebug|user] - croot: Changes directory to the top of the tree. - cout: Changes directory to out. - m: Makes from the top of the tree. - mm: Builds all of the modules in the current directory, but not their dependencies. - mmm: Builds all of the modules in the supplied directories, but not their dependencies. To limit the modules being built use the syntax: mmm dir/:target1,target2. - mma: Builds all of the modules in the current directory, and their dependencies. - mmp: Builds all of the modules in the current directory and pushes them to the device. - mmap: Builds all of the modules in the current directory, and its dependencies, then pushes the package to the device. - mmmp: Builds all of the modules in the supplied directories and pushes them to the device. - mmma: Builds all of the modules in the supplied directories, and their dependencies. - mms: Short circuit builder. Quickly re-build the kernel, rootfs, boot and system images without deep dependencies. Requires the full build to have run before. - cgrep: Greps on all local C/C++ files. - ggrep: Greps on all local Gradle files. - jgrep: Greps on all local Java files. - resgrep: Greps on all local res/*.xml files. - mangrep: Greps on all local AndroidManifest.xml files. - sepgrep: Greps on all local sepolicy files. - sgrep: Greps on all local source files. - godir: Go to the directory containing a file. - cmremote: Add git remote for LineageOS Gerrit Review - cmgerrit: A Git wrapper that fetches/pushes patch from/to LineageOS Gerrit Review - cmrebase: Rebase a Gerrit change and push it again - aospremote: Add git remote for matching AOSP repository - cafremote: Add git remote for matching CodeAurora repository. - mka: Builds using SCHED_BATCH on all processors - mkap: Builds the module(s) using mka and pushes them to the device. - cmka: Cleans and builds using mka. - repolastsync: Prints date and time of last repo sync. - reposync: Parallel repo sync using ionice and SCHED_BATCH - repopick: Utility to fetch changes from Gerrit. - installboot: Installs a boot.img to the connected device. - installrecovery: Installs a recovery.img to the connected device. Environemnt options: - SANITIZE_HOST: Set to 'true' to use ASAN for all host modules. Note that ASAN_OPTIONS=detect_leaks=0 will be set by default until the build is leak-check clean. Look at the source to view more functions. The complete list is: EOF T=$(gettop) for i in `cat $T/build/envsetup.sh | sed -n "/^[ \t]*function /s/function \([a-z_]*\).*/\1/p" | sort | uniq`; do echo "$i" done | column } # Get the value of a build variable as an absolute path. function get_abs_build_var() { T=$(gettop) if [ ! "$T" ]; then echo "Couldn't locate the top of the tree. Try setting TOP." >&2 return fi (\cd $T; CALLED_FROM_SETUP=true BUILD_SYSTEM=build/core \ command make --no-print-directory -f build/core/config.mk dumpvar-abs-$1) } # Get the exact value of a build variable. function get_build_var() { T=$(gettop) if [ ! "$T" ]; then echo "Couldn't locate the top of the tree. Try setting TOP." >&2 return fi (\cd $T; CALLED_FROM_SETUP=true BUILD_SYSTEM=build/core \ command make --no-print-directory -f build/core/config.mk dumpvar-$1) } # check to see if the supplied product is one we can build function check_product() { T=$(gettop) if [ ! "$T" ]; then echo "Couldn't locate the top of the tree. Try setting TOP." >&2 return fi if (echo -n $1 | grep -q -e "^lineage_") ; then CM_BUILD=$(echo -n $1 | sed -e 's/^lineage_//g') export BUILD_NUMBER=$((date +%s%N ; echo $CM_BUILD; hostname) | openssl sha1 | sed -e 's/.*=//g; s/ //g' | cut -c1-10) elif (echo -n $1 | grep -q -e "^cm_") ; then # Fall back to cm_ CM_BUILD=$(echo -n $1 | sed -e 's/^cm_//g') export BUILD_NUMBER=$((date +%s%N ; echo $CM_BUILD; hostname) | openssl sha1 | sed -e 's/.*=//g; s/ //g' | cut -c1-10) elif (echo -n $1 | grep -q -e "^replicant_") ; then CM_BUILD=$(echo -n $1 | sed -e 's/^replicant_//g') export BUILD_NUMBER=$((date +%s%N ; echo $CM_BUILD; hostname) | openssl sha1 | sed -e 's/.*=//g; s/ //g' | cut -c1-10) else CM_BUILD= fi export CM_BUILD TARGET_PRODUCT=$1 \ TARGET_BUILD_VARIANT= \ TARGET_BUILD_TYPE= \ TARGET_BUILD_APPS= \ get_build_var TARGET_DEVICE > /dev/null # hide successful answers, but allow the errors to show } VARIANT_CHOICES=(user userdebug eng) # check to see if the supplied variant is valid function check_variant() { for v in ${VARIANT_CHOICES[@]} do if [ "$v" = "$1" ] then return 0 fi done return 1 } function setpaths() { T=$(gettop) if [ ! "$T" ]; then echo "Couldn't locate the top of the tree. Try setting TOP." return fi ################################################################## # # # Read me before you modify this code # # # # This function sets ANDROID_BUILD_PATHS to what it is adding # # to PATH, and the next time it is run, it removes that from # # PATH. This is required so lunch can be run more than once # # and still have working paths. # # # ################################################################## # Note: on windows/cygwin, ANDROID_BUILD_PATHS will contain spaces # due to "C:\Program Files" being in the path. # out with the old if [ -n "$ANDROID_BUILD_PATHS" ] ; then export PATH=${PATH/$ANDROID_BUILD_PATHS/} fi if [ -n "$ANDROID_PRE_BUILD_PATHS" ] ; then export PATH=${PATH/$ANDROID_PRE_BUILD_PATHS/} # strip leading ':', if any export PATH=${PATH/:%/} fi # and in with the new prebuiltdir=$(getprebuilt) gccprebuiltdir=$(get_abs_build_var ANDROID_GCC_PREBUILTS) # defined in core/config.mk targetgccversion=$(get_build_var TARGET_GCC_VERSION) targetgccversion2=$(get_build_var 2ND_TARGET_GCC_VERSION) targetlegacygccversion=$(get_build_var TARGET_LEGACY_GCC_VERSION) export TARGET_GCC_VERSION=$targetgccversion # The gcc toolchain does not exists for windows/cygwin. In this case, do not reference it. export ANDROID_TOOLCHAIN= export ANDROID_TOOLCHAIN_2ND_ARCH= local ARCH=$(get_build_var TARGET_ARCH) case $ARCH in x86) toolchaindir=x86/x86_64-linux-android-$targetgccversion/bin ;; x86_64) toolchaindir=x86/x86_64-linux-android-$targetgccversion/bin ;; arm) export TARGET_TOOLS_PREFIX=toolchain/gcc/arm/arm-linux-androideabi/install/bin/arm-linux-androideabi- ;; arm64) toolchaindir=aarch64/aarch64-linux-android-$targetgccversion/bin; toolchaindir2=arm/arm-linux-androideabi-$targetgccversion2/bin ;; mips|mips64) toolchaindir=mips/mips64el-linux-android-$targetgccversion/bin ;; *) echo "Can't find toolchain for unknown architecture: $ARCH" toolchaindir=xxxxxxxxx ;; esac if [ -d "$gccprebuiltdir/$toolchaindir" ]; then export ANDROID_TOOLCHAIN=$gccprebuiltdir/$toolchaindir fi if [ -d "$gccprebuiltdir/$toolchaindir2" ]; then export ANDROID_TOOLCHAIN_2ND_ARCH=$gccprebuiltdir/$toolchaindir2 fi unset ANDROID_KERNEL_TOOLCHAIN_PATH case $ARCH in arm) # use the toolchain that comes with the Linux Distribution export ARM_EABI_TOOLCHAIN="arm-none-eabi-" ANDROID_KERNEL_TOOLCHAIN_PATH="$ARM_EABI_TOOLCHAIN": ;; *) # No need to set ARM_EABI_TOOLCHAIN for other ARCHs ;; esac export ANDROID_DEV_SCRIPTS=$T/development/scripts:$T/prebuilts/devtools/tools export ANDROID_BUILD_PATHS=$(get_build_var ANDROID_BUILD_PATHS):$ANDROID_TOOLCHAIN:$ANDROID_TOOLCHAIN_2ND_ARCH:$ANDROID_KERNEL_TOOLCHAIN_PATH$ANDROID_DEV_SCRIPTS: # If prebuilts/android-emulator// exists, prepend it to our PATH # to ensure that the corresponding 'emulator' binaries are used. case $(uname -s) in Darwin) ANDROID_EMULATOR_PREBUILTS=$T/prebuilts/android-emulator/darwin-x86_64 ;; Linux) ANDROID_EMULATOR_PREBUILTS=$T/prebuilts/android-emulator/linux-x86_64 ;; *) ANDROID_EMULATOR_PREBUILTS= ;; esac if [ -n "$ANDROID_EMULATOR_PREBUILTS" -a -d "$ANDROID_EMULATOR_PREBUILTS" ]; then ANDROID_BUILD_PATHS=$ANDROID_BUILD_PATHS$ANDROID_EMULATOR_PREBUILTS: export ANDROID_EMULATOR_PREBUILTS fi export PATH=$ANDROID_BUILD_PATHS$PATH unset ANDROID_JAVA_TOOLCHAIN unset ANDROID_PRE_BUILD_PATHS if [ -n "$JAVA_HOME" ]; then export ANDROID_JAVA_TOOLCHAIN=$JAVA_HOME/bin export ANDROID_PRE_BUILD_PATHS=$ANDROID_JAVA_TOOLCHAIN: export PATH=$ANDROID_PRE_BUILD_PATHS$PATH fi unset ANDROID_PRODUCT_OUT export ANDROID_PRODUCT_OUT=$(get_abs_build_var PRODUCT_OUT) export OUT=$ANDROID_PRODUCT_OUT unset ANDROID_HOST_OUT export ANDROID_HOST_OUT=$(get_abs_build_var HOST_OUT) if [ -n "$ANDROID_CCACHE_DIR" ]; then export CCACHE_DIR=$ANDROID_CCACHE_DIR fi # needed for building linux on MacOS # TODO: fix the path #export HOST_EXTRACFLAGS="-I "$T/system/kernel_headers/host_include } function printconfig() { T=$(gettop) if [ ! "$T" ]; then echo "Couldn't locate the top of the tree. Try setting TOP." >&2 return fi get_build_var report_config } function set_stuff_for_environment() { settitle set_java_home setpaths set_sequence_number # With this environment variable new GCC can apply colors to warnings/errors export GCC_COLORS='error=01;31:warning=01;35:note=01;36:caret=01;32:locus=01:quote=01' export ASAN_OPTIONS=detect_leaks=0 } function set_sequence_number() { export BUILD_ENV_SEQUENCE_NUMBER=10 } function settitle() { if [ "$STAY_OFF_MY_LAWN" = "" ]; then local arch=$(gettargetarch) local product=$TARGET_PRODUCT local variant=$TARGET_BUILD_VARIANT local apps=$TARGET_BUILD_APPS if [ -z "$PROMPT_COMMAND" ]; then # No prompts PROMPT_COMMAND="echo -ne \"\033]0;${USER}@${HOSTNAME}: ${PWD}\007\"" elif [ -z "$(echo $PROMPT_COMMAND | grep '033]0;')" ]; then # Prompts exist, but no hardstatus PROMPT_COMMAND="echo -ne \"\033]0;${USER}@${HOSTNAME}: ${PWD}\007\";${PROMPT_COMMAND}" fi if [ ! -z "$ANDROID_PROMPT_PREFIX" ]; then PROMPT_COMMAND="$(echo $PROMPT_COMMAND | sed -e 's/$ANDROID_PROMPT_PREFIX //g')" fi if [ -z "$apps" ]; then ANDROID_PROMPT_PREFIX="[${arch}-${product}-${variant}]" else ANDROID_PROMPT_PREFIX="[$arch $apps $variant]" fi export ANDROID_PROMPT_PREFIX # Inject build data into hardstatus export PROMPT_COMMAND="$(echo $PROMPT_COMMAND | sed -e 's/\\033]0;\(.*\)\\007/\\033]0;$ANDROID_PROMPT_PREFIX \1\\007/g')" fi } function check_bash_version() { # Keep us from trying to run in something that isn't bash. if [ -z "${BASH_VERSION}" ]; then return 1 fi # Keep us from trying to run in bash that's too old. if [ "${BASH_VERSINFO[0]}" -lt 4 ] ; then return 2 fi return 0 } function choosetype() { echo "Build type choices are:" echo " 1. release" echo " 2. debug" echo local DEFAULT_NUM DEFAULT_VALUE DEFAULT_NUM=1 DEFAULT_VALUE=release export TARGET_BUILD_TYPE= local ANSWER while [ -z $TARGET_BUILD_TYPE ] do echo -n "Which would you like? ["$DEFAULT_NUM"] " if [ -z "$1" ] ; then read ANSWER else echo $1 ANSWER=$1 fi case $ANSWER in "") export TARGET_BUILD_TYPE=$DEFAULT_VALUE ;; 1) export TARGET_BUILD_TYPE=release ;; release) export TARGET_BUILD_TYPE=release ;; 2) export TARGET_BUILD_TYPE=debug ;; debug) export TARGET_BUILD_TYPE=debug ;; *) echo echo "I didn't understand your response. Please try again." echo ;; esac if [ -n "$1" ] ; then break fi done set_stuff_for_environment } # # This function isn't really right: It chooses a TARGET_PRODUCT # based on the list of boards. Usually, that gets you something # that kinda works with a generic product, but really, you should # pick a product by name. # function chooseproduct() { if [ "x$TARGET_PRODUCT" != x ] ; then default_value=$TARGET_PRODUCT else default_value=full fi export TARGET_PRODUCT= local ANSWER while [ -z "$TARGET_PRODUCT" ] do echo -n "Which product would you like? [$default_value] " if [ -z "$1" ] ; then read ANSWER else echo $1 ANSWER=$1 fi if [ -z "$ANSWER" ] ; then export TARGET_PRODUCT=$default_value else if check_product $ANSWER then export TARGET_PRODUCT=$ANSWER else echo "** Not a valid product: $ANSWER" fi fi if [ -n "$1" ] ; then break fi done set_stuff_for_environment } function choosevariant() { echo "Variant choices are:" local index=1 local v for v in ${VARIANT_CHOICES[@]} do # The product name is the name of the directory containing # the makefile we found, above. echo " $index. $v" index=$(($index+1)) done local default_value=eng local ANSWER export TARGET_BUILD_VARIANT= while [ -z "$TARGET_BUILD_VARIANT" ] do echo -n "Which would you like? [$default_value] " if [ -z "$1" ] ; then read ANSWER else echo $1 ANSWER=$1 fi if [ -z "$ANSWER" ] ; then export TARGET_BUILD_VARIANT=$default_value elif (echo -n $ANSWER | grep -q -e "^[0-9][0-9]*$") ; then if [ "$ANSWER" -le "${#VARIANT_CHOICES[@]}" ] ; then export TARGET_BUILD_VARIANT=${VARIANT_CHOICES[$(($ANSWER-1))]} fi else if check_variant $ANSWER then export TARGET_BUILD_VARIANT=$ANSWER else echo "** Not a valid variant: $ANSWER" fi fi if [ -n "$1" ] ; then break fi done } function choosecombo() { choosetype $1 echo echo chooseproduct $2 echo echo choosevariant $3 echo set_stuff_for_environment printconfig } # Clear this variable. It will be built up again when the vendorsetup.sh # files are included at the end of this file. unset LUNCH_MENU_CHOICES function add_lunch_combo() { local new_combo=$1 local c for c in ${LUNCH_MENU_CHOICES[@]} ; do if [ "$new_combo" = "$c" ] ; then return fi done LUNCH_MENU_CHOICES=(${LUNCH_MENU_CHOICES[@]} $new_combo) } # add the default one here add_lunch_combo aosp_arm-eng add_lunch_combo aosp_arm64-eng add_lunch_combo aosp_mips-eng add_lunch_combo aosp_mips64-eng add_lunch_combo aosp_x86-eng add_lunch_combo aosp_x86_64-eng function print_lunch_menu() { local uname=$(uname) echo echo "You're building on" $uname if [ "$(uname)" = "Darwin" ] ; then echo " (ohai, koush!)" fi echo if [ "z${CM_DEVICES_ONLY}" != "z" ]; then echo "Breakfast menu... pick a combo:" else echo "Lunch menu... pick a combo:" fi local i=1 local choice for choice in ${LUNCH_MENU_CHOICES[@]} do echo " $i. $choice " i=$(($i+1)) done | column if [ "z${CM_DEVICES_ONLY}" != "z" ]; then echo "... and don't forget the bacon!" fi echo } function brunch() { breakfast $* if [ $? -eq 0 ]; then mka bacon else echo "No such item in brunch menu. Try 'breakfast'" return 1 fi return $? } function breakfast() { target=$1 local variant=$2 CM_DEVICES_ONLY="true" unset LUNCH_MENU_CHOICES add_lunch_combo full-eng for f in `/bin/ls vendor/replicant/vendorsetup.sh 2> /dev/null` do echo "including $f" . $f done unset f if [ $# -eq 0 ]; then # No arguments, so let's have the full menu lunch else echo "z$target" | grep -q "-" if [ $? -eq 0 ]; then # A buildtype was specified, assume a full device name lunch $target else # This is probably just the Lineage model name if [ -z "$variant" ]; then variant="userdebug" fi lunch lineage_$target-$variant if [ $? -ne 0 ]; then # try CM echo "** Warning: '$target' is using CM-based makefiles. This will be deprecated in the next major release." lunch cm_$target-$variant fi fi fi return $? } alias bib=breakfast function lunch() { local answer LUNCH_MENU_CHOICES=($(for l in ${LUNCH_MENU_CHOICES[@]}; do echo "$l"; done | sort)) if [ "$1" ] ; then answer=$1 else print_lunch_menu echo -n "Which would you like? [aosp_arm-eng] " read answer fi local selection= if [ -z "$answer" ] then selection=aosp_arm-eng elif (echo -n $answer | grep -q -e "^[0-9][0-9]*$") then if [ $answer -le ${#LUNCH_MENU_CHOICES[@]} ] then selection=${LUNCH_MENU_CHOICES[$(($answer-1))]} fi elif (echo -n $answer | grep -q -e "^[^\-][^\-]*-[^\-][^\-]*$") then selection=$answer fi if [ -z "$selection" ] then echo echo "Invalid lunch combo: $answer" return 1 fi export TARGET_BUILD_APPS= local product=$(echo -n $selection | sed -e "s/-.*$//") check_product $product if [ $? -ne 0 ] then echo echo "** Don't have a product spec for: '$product'" echo "** Do you have the right repo manifest?" product= fi local variant=$(echo -n $selection | sed -e "s/^[^\-]*-//") check_variant $variant if [ $? -ne 0 ] then echo echo "** Invalid variant: '$variant'" echo "** Must be one of ${VARIANT_CHOICES[@]}" variant= fi if [ -z "$product" -o -z "$variant" ] then echo return 1 fi export TARGET_PRODUCT=$product export TARGET_BUILD_VARIANT=$variant export TARGET_BUILD_TYPE=release echo fixup_common_out_dir set_stuff_for_environment printconfig } # Tab completion for lunch. function _lunch() { local cur prev opts COMPREPLY=() cur="${COMP_WORDS[COMP_CWORD]}" prev="${COMP_WORDS[COMP_CWORD-1]}" COMPREPLY=( $(compgen -W "${LUNCH_MENU_CHOICES[*]}" -- ${cur}) ) return 0 } complete -F _lunch lunch 2>/dev/null # Configures the build to build unbundled apps. # Run tapas with one or more app names (from LOCAL_PACKAGE_NAME) function tapas() { local arch="$(echo $* | xargs -n 1 echo | \grep -E '^(arm|x86|mips|armv5|arm64|x86_64|mips64)$' | xargs)" local variant="$(echo $* | xargs -n 1 echo | \grep -E '^(user|userdebug|eng)$' | xargs)" local density="$(echo $* | xargs -n 1 echo | \grep -E '^(ldpi|mdpi|tvdpi|hdpi|xhdpi|xxhdpi|xxxhdpi|alldpi)$' | xargs)" local apps="$(echo $* | xargs -n 1 echo | \grep -E -v '^(user|userdebug|eng|arm|x86|mips|armv5|arm64|x86_64|mips64|ldpi|mdpi|tvdpi|hdpi|xhdpi|xxhdpi|xxxhdpi|alldpi)$' | xargs)" if [ $(echo $arch | wc -w) -gt 1 ]; then echo "tapas: Error: Multiple build archs supplied: $arch" return fi if [ $(echo $variant | wc -w) -gt 1 ]; then echo "tapas: Error: Multiple build variants supplied: $variant" return fi if [ $(echo $density | wc -w) -gt 1 ]; then echo "tapas: Error: Multiple densities supplied: $density" return fi local product=full case $arch in x86) product=full_x86;; mips) product=full_mips;; armv5) product=generic_armv5;; arm64) product=aosp_arm64;; x86_64) product=aosp_x86_64;; mips64) product=aosp_mips64;; esac if [ -z "$variant" ]; then variant=eng fi if [ -z "$apps" ]; then apps=all fi if [ -z "$density" ]; then density=alldpi fi export TARGET_PRODUCT=$product export TARGET_BUILD_VARIANT=$variant export TARGET_BUILD_DENSITY=$density export TARGET_BUILD_TYPE=release export TARGET_BUILD_APPS=$apps set_stuff_for_environment printconfig } function eat() { if [ "$OUT" ] ; then MODVERSION=$(get_build_var LINEAGE_VERSION) ZIPFILE=lineage-$MODVERSION.zip ZIPPATH=$OUT/$ZIPFILE if [ ! -f $ZIPPATH ] ; then echo "Nothing to eat" return 1 fi adb start-server # Prevent unexpected starting server message from adb get-state in the next line if [ $(adb get-state) != device -a $(adb shell test -e /sbin/recovery 2> /dev/null; echo $?) != 0 ] ; then echo "No device is online. Waiting for one..." echo "Please connect USB and/or enable USB debugging" until [ $(adb get-state) = device -o $(adb shell test -e /sbin/recovery 2> /dev/null; echo $?) = 0 ];do sleep 1 done echo "Device Found.." fi if (adb shell getprop ro.cm.device | grep -q "$CM_BUILD"); then # if adbd isn't root we can't write to /cache/recovery/ adb root sleep 1 adb wait-for-device cat << EOF > /tmp/command --sideload_auto_reboot EOF if adb push /tmp/command /cache/recovery/ ; then echo "Rebooting into recovery for sideload installation" adb reboot recovery adb wait-for-sideload adb sideload $ZIPPATH fi rm /tmp/command else echo "Nothing to eat" return 1 fi return $? else echo "The connected device does not appear to be $CM_BUILD, run away!" fi } function omnom { brunch $* eat } function gettop { local TOPFILE=build/core/envsetup.mk if [ -n "$TOP" -a -f "$TOP/$TOPFILE" ] ; then # The following circumlocution ensures we remove symlinks from TOP. (cd $TOP; PWD= /bin/pwd) else if [ -f $TOPFILE ] ; then # The following circumlocution (repeated below as well) ensures # that we record the true directory name and not one that is # faked up with symlink names. PWD= /bin/pwd else local HERE=$PWD T= while [ \( ! \( -f $TOPFILE \) \) -a \( $PWD != "/" \) ]; do \cd .. T=`PWD= /bin/pwd -P` done \cd $HERE if [ -f "$T/$TOPFILE" ]; then echo $T fi fi fi } # Return driver for "make", if any (eg. static analyzer) function getdriver() { local T="$1" test "$WITH_STATIC_ANALYZER" = "0" && unset WITH_STATIC_ANALYZER if [ -n "$WITH_STATIC_ANALYZER" ]; then echo "\ $T/prebuilts/misc/linux-x86/analyzer/tools/scan-build/scan-build \ --use-analyzer $T/prebuilts/misc/linux-x86/analyzer/bin/analyzer \ --status-bugs \ --top=$T" fi } function m() { local T=$(gettop) local DRV=$(getdriver $T) if [ "$T" ]; then $DRV make -C $T -f build/core/main.mk $@ else echo "Couldn't locate the top of the tree. Try setting TOP." return 1 fi } function findmakefile() { TOPFILE=build/core/envsetup.mk local HERE=$PWD T= while [ \( ! \( -f $TOPFILE \) \) -a \( $PWD != "/" \) ]; do T=`PWD= /bin/pwd` if [ -f "$T/Android.mk" ]; then echo $T/Android.mk \cd $HERE return fi \cd .. done \cd $HERE } function mm() { local T=$(gettop) local DRV=$(getdriver $T) # If we're sitting in the root of the build tree, just do a # normal make. if [ -f build/core/envsetup.mk -a -f Makefile ]; then $DRV make $@ else # Find the closest Android.mk file. local M=$(findmakefile) local MODULES= local GET_INSTALL_PATH= # Remove the path to top as the makefilepath needs to be relative local M=`echo $M|sed 's:'$T'/::'` if [ ! "$T" ]; then echo "Couldn't locate the top of the tree. Try setting TOP." return 1 elif [ ! "$M" ]; then echo "Couldn't locate a makefile from the current directory." return 1 else for ARG in $@; do case $ARG in GET-INSTALL-PATH) GET_INSTALL_PATH=$ARG;; esac done if [ -n "$GET_INSTALL_PATH" ]; then MODULES= # set all args to 'GET-INSTALL-PATH' set -- GET-INSTALL-PATH else MODULES=all_modules fi ONE_SHOT_MAKEFILE=$M $DRV make -C $T -f build/core/main.mk $MODULES "$@" fi fi } function mmm() { local T=$(gettop) local DRV=$(getdriver $T) if [ "$T" ]; then local MAKEFILE= local MODULES= local ARGS= local DIR TO_CHOP local GET_INSTALL_PATH= if [ "$(__detect_shell)" = "zsh" ]; then set -lA DASH_ARGS $(echo "$@" | awk -v RS=" " -v ORS=" " '/^-.*$/') set -lA DIRS $(echo "$@" | awk -v RS=" " -v ORS=" " '/^[^-].*$/') else local DASH_ARGS=$(echo "$@" | awk -v RS=" " -v ORS=" " '/^-.*$/') local DIRS=$(echo "$@" | awk -v RS=" " -v ORS=" " '/^[^-].*$/') fi for DIR in $DIRS ; do MODULES=`echo $DIR | sed -n -e 's/.*:\(.*$\)/\1/p' | sed 's/,/ /'` if [ "$MODULES" = "" ]; then MODULES=all_modules fi DIR=`echo $DIR | sed -e 's/:.*//' -e 's:/$::'` if [ -f $DIR/Android.mk ]; then local TO_CHOP=`(\cd -P -- $T && pwd -P) | wc -c | tr -d ' '` local TO_CHOP=`expr $TO_CHOP + 1` local START=`PWD= /bin/pwd` local MFILE=`echo $START | cut -c${TO_CHOP}-` if [ "$MFILE" = "" ] ; then MFILE=$DIR/Android.mk else MFILE=$MFILE/$DIR/Android.mk fi MAKEFILE="$MAKEFILE $MFILE" else case $DIR in showcommands | snod | dist | incrementaljavac | *=*) ARGS="$ARGS $DIR";; GET-INSTALL-PATH) GET_INSTALL_PATH=$DIR;; *) if [ -d $DIR ]; then echo "No Android.mk in $DIR."; else echo "Couldn't locate the directory $DIR"; fi return 1;; esac fi done if [ -n "$GET_INSTALL_PATH" ]; then ARGS=$GET_INSTALL_PATH MODULES= fi ONE_SHOT_MAKEFILE="$MAKEFILE" $DRV make -C $T -f build/core/main.mk $DASH_ARGS $MODULES $ARGS else echo "Couldn't locate the top of the tree. Try setting TOP." return 1 fi } function mma() { local T=$(gettop) local DRV=$(getdriver $T) if [ -f build/core/envsetup.mk -a -f Makefile ]; then $DRV make $@ else if [ ! "$T" ]; then echo "Couldn't locate the top of the tree. Try setting TOP." return 1 fi local MY_PWD=`PWD= /bin/pwd|sed 's:'$T'/::'` $DRV make -C $T -f build/core/main.mk $@ all_modules BUILD_MODULES_IN_PATHS="$MY_PWD" fi } function mmma() { local T=$(gettop) local DRV=$(getdriver $T) if [ "$T" ]; then if [ "$(__detect_shell)" = "zsh" ]; then set -lA DASH_ARGS $(echo "$@" | awk -v RS=" " -v ORS=" " '/^-.*$/') set -lA DIRS $(echo "$@" | awk -v RS=" " -v ORS=" " '/^[^-].*$/') else local DASH_ARGS=$(echo "$@" | awk -v RS=" " -v ORS=" " '/^-.*$/') local DIRS=$(echo "$@" | awk -v RS=" " -v ORS=" " '/^[^-].*$/') fi local MY_PWD=`PWD= /bin/pwd` if [ "$MY_PWD" = "$T" ]; then MY_PWD= else MY_PWD=`echo $MY_PWD|sed 's:'$T'/::'` fi local DIR= local MODULE_PATHS= local ARGS= for DIR in $DIRS ; do if [ -d $DIR ]; then if [ "$MY_PWD" = "" ]; then MODULE_PATHS="$MODULE_PATHS $DIR" else MODULE_PATHS="$MODULE_PATHS $MY_PWD/$DIR" fi else case $DIR in showcommands | snod | dist | incrementaljavac | *=*) ARGS="$ARGS $DIR";; *) echo "Couldn't find directory $DIR"; return 1;; esac fi done $DRV make -C $T -f build/core/main.mk $DASH_ARGS $ARGS all_modules BUILD_MODULES_IN_PATHS="$MODULE_PATHS" else echo "Couldn't locate the top of the tree. Try setting TOP." return 1 fi } function croot() { T=$(gettop) if [ "$T" ]; then \cd $(gettop) else echo "Couldn't locate the top of the tree. Try setting TOP." fi } function cout() { if [ "$OUT" ]; then cd $OUT else echo "Couldn't locate out directory. Try setting OUT." fi } function cproj() { TOPFILE=build/core/envsetup.mk local HERE=$PWD T= while [ \( ! \( -f $TOPFILE \) \) -a \( $PWD != "/" \) ]; do T=$PWD if [ -f "$T/Android.mk" ]; then \cd $T return fi \cd .. done \cd $HERE echo "can't find Android.mk" } # simplified version of ps; output in the form # function qpid() { local prepend='' local append='' if [ "$1" = "--exact" ]; then prepend=' ' append='$' shift elif [ "$1" = "--help" -o "$1" = "-h" ]; then echo "usage: qpid [[--exact] " return 255 fi local EXE="$1" if [ "$EXE" ] ; then qpid | \grep "$prepend$EXE$append" else adb shell ps \ | tr -d '\r' \ | sed -e 1d -e 's/^[^ ]* *\([0-9]*\).* \([^ ]*\)$/\1 \2/' fi } function pid() { local prepend='' local append='' if [ "$1" = "--exact" ]; then prepend=' ' append='$' shift fi local EXE="$1" if [ "$EXE" ] ; then local PID=`adb shell ps \ | tr -d '\r' \ | \grep "$prepend$EXE$append" \ | sed -e 's/^[^ ]* *\([0-9]*\).*$/\1/'` echo "$PID" else echo "usage: pid [--exact] " return 255 fi } # coredump_setup - enable core dumps globally for any process # that has the core-file-size limit set correctly # # NOTE: You must call also coredump_enable for a specific process # if its core-file-size limit is not set already. # NOTE: Core dumps are written to ramdisk; they will not survive a reboot! function coredump_setup() { echo "Getting root..."; adb root; adb wait-for-device; echo "Remounting root parition read-write..."; adb shell mount -w -o remount -t rootfs rootfs; sleep 1; adb wait-for-device; adb shell mkdir -p /cores; adb shell mount -t tmpfs tmpfs /cores; adb shell chmod 0777 /cores; echo "Granting SELinux permission to dump in /cores..."; adb shell restorecon -R /cores; echo "Set core pattern."; adb shell 'echo /cores/core.%p > /proc/sys/kernel/core_pattern'; echo "Done." } # coredump_enable - enable core dumps for the specified process # $1 = PID of process (e.g., $(pid mediaserver)) # # NOTE: coredump_setup must have been called as well for a core # dump to actually be generated. function coredump_enable() { local PID=$1; if [ -z "$PID" ]; then printf "Expecting a PID!\n"; return; fi; echo "Setting core limit for $PID to infinite..."; adb shell prlimit $PID 4 -1 -1 } # core - send SIGV and pull the core for process # $1 = PID of process (e.g., $(pid mediaserver)) # # NOTE: coredump_setup must be called once per boot for core dumps to be # enabled globally. function core() { local PID=$1; if [ -z "$PID" ]; then printf "Expecting a PID!\n"; return; fi; local CORENAME=core.$PID; local COREPATH=/cores/$CORENAME; local SIG=SEGV; coredump_enable $1; local done=0; while [ $(adb shell "[ -d /proc/$PID ] && echo -n yes") ]; do printf "\tSending SIG%s to %d...\n" $SIG $PID; adb shell kill -$SIG $PID; sleep 1; done; adb shell "while [ ! -f $COREPATH ] ; do echo waiting for $COREPATH to be generated; sleep 1; done" echo "Done: core is under $COREPATH on device."; } # systemstack - dump the current stack trace of all threads in the system process # to the usual ANR traces file function systemstack() { stacks system_server } function stacks() { if [[ $1 =~ ^[0-9]+$ ]] ; then local PID="$1" elif [ "$1" ] ; then local PIDLIST="$(pid $1)" if [[ $PIDLIST =~ ^[0-9]+$ ]] ; then local PID="$PIDLIST" elif [ "$PIDLIST" ] ; then echo "more than one process: $1" else echo "no such process: $1" fi else echo "usage: stacks [pid|process name]" fi if [ "$PID" ] ; then # Determine whether the process is native if adb shell ls -l /proc/$PID/exe | grep -q /system/bin/app_process ; then # Dump stacks of Dalvik process local TRACES=/data/anr/traces.txt local ORIG=/data/anr/traces.orig local TMP=/data/anr/traces.tmp # Keep original traces to avoid clobbering adb shell mv $TRACES $ORIG # Make sure we have a usable file adb shell touch $TRACES adb shell chmod 666 $TRACES # Dump stacks and wait for dump to finish adb shell kill -3 $PID adb shell notify $TRACES >/dev/null # Restore original stacks, and show current output adb shell mv $TRACES $TMP adb shell mv $ORIG $TRACES adb shell cat $TMP else # Dump stacks of native process local USE64BIT="$(is64bit $PID)" adb shell debuggerd$USE64BIT -b $PID fi fi } # Read the ELF header from /proc/$PID/exe to determine if the process is # 64-bit. function is64bit() { local PID="$1" if [ "$PID" ] ; then if [[ "$(adb shell cat /proc/$PID/exe | xxd -l 1 -s 4 -ps)" -eq "02" ]] ; then echo "64" else echo "" fi else echo "" fi } function dddclient() { local OUT_ROOT=$(get_abs_build_var PRODUCT_OUT) local OUT_SYMBOLS=$(get_abs_build_var TARGET_OUT_UNSTRIPPED) local OUT_SO_SYMBOLS=$(get_abs_build_var TARGET_OUT_SHARED_LIBRARIES_UNSTRIPPED) local OUT_VENDOR_SO_SYMBOLS=$(get_abs_build_var TARGET_OUT_VENDOR_SHARED_LIBRARIES_UNSTRIPPED) local OUT_EXE_SYMBOLS=$(get_symbols_directory) local PREBUILTS=$(get_abs_build_var ANDROID_PREBUILTS) local ARCH=$(get_build_var TARGET_ARCH) local GDB case "$ARCH" in arm) GDB=arm-linux-androideabi-gdb;; arm64) GDB=arm-linux-androideabi-gdb; GDB64=aarch64-linux-android-gdb;; mips|mips64) GDB=mips64el-linux-android-gdb;; x86) GDB=x86_64-linux-android-gdb;; x86_64) GDB=x86_64-linux-android-gdb;; *) echo "Unknown arch $ARCH"; return 1;; esac if [ "$OUT_ROOT" -a "$PREBUILTS" ]; then local EXE="$1" if [ "$EXE" ] ; then EXE=$1 if [[ $EXE =~ ^[^/].* ]] ; then EXE="system/bin/"$EXE fi else EXE="app_process" fi local PORT="$2" if [ "$PORT" ] ; then PORT=$2 else PORT=":5039" fi local PID="$3" if [ "$PID" ] ; then if [[ ! "$PID" =~ ^[0-9]+$ ]] ; then PID=`pid $3` if [[ ! "$PID" =~ ^[0-9]+$ ]] ; then # that likely didn't work because of returning multiple processes # try again, filtering by root processes (don't contain colon) PID=`adb shell ps | \grep $3 | \grep -v ":" | awk '{print $2}'` if [[ ! "$PID" =~ ^[0-9]+$ ]] then echo "Couldn't resolve '$3' to single PID" return 1 else echo "" echo "WARNING: multiple processes matching '$3' observed, using root process" echo "" fi fi fi adb forward "tcp$PORT" "tcp$PORT" local USE64BIT="$(is64bit $PID)" adb shell gdbserver$USE64BIT $PORT --attach $PID & sleep 2 else echo "" echo "If you haven't done so already, do this first on the device:" echo " gdbserver $PORT /system/bin/$EXE" echo " or" echo " gdbserver $PORT --attach " echo "" fi OUT_SO_SYMBOLS=$OUT_SO_SYMBOLS$USE64BIT OUT_VENDOR_SO_SYMBOLS=$OUT_VENDOR_SO_SYMBOLS$USE64BIT echo >|"$OUT_ROOT/gdbclient.cmds" "set solib-absolute-prefix $OUT_SYMBOLS" echo >>"$OUT_ROOT/gdbclient.cmds" "set solib-search-path $OUT_SO_SYMBOLS:$OUT_SO_SYMBOLS/hw:$OUT_SO_SYMBOLS/ssl/engines:$OUT_SO_SYMBOLS/drm:$OUT_SO_SYMBOLS/egl:$OUT_SO_SYMBOLS/soundfx:$OUT_VENDOR_SO_SYMBOLS:$OUT_VENDOR_SO_SYMBOLS/hw:$OUT_VENDOR_SO_SYMBOLS/egl" echo >>"$OUT_ROOT/gdbclient.cmds" "source $ANDROID_BUILD_TOP/development/scripts/gdb/dalvik.gdb" echo >>"$OUT_ROOT/gdbclient.cmds" "target remote $PORT" # Enable special debugging for ART processes. if [[ $EXE =~ (^|/)(app_process|dalvikvm)(|32|64)$ ]]; then echo >> "$OUT_ROOT/gdbclient.cmds" "art-on" fi echo >>"$OUT_ROOT/gdbclient.cmds" "" local WHICH_GDB= # 64-bit exe found if [ "$USE64BIT" != "" ] ; then WHICH_GDB=$ANDROID_TOOLCHAIN/$GDB64 # 32-bit exe / 32-bit platform elif [ "$(get_build_var TARGET_2ND_ARCH)" = "" ]; then WHICH_GDB=$ANDROID_TOOLCHAIN/$GDB # 32-bit exe / 64-bit platform else WHICH_GDB=$ANDROID_TOOLCHAIN_2ND_ARCH/$GDB fi ddd --debugger $WHICH_GDB -x "$OUT_ROOT/gdbclient.cmds" "$OUT_EXE_SYMBOLS/$EXE" else echo "Unable to determine build system output dir." fi } case `uname -s` in Darwin) function sgrep() { find -E . -name .repo -prune -o -name .git -prune -o -type f -iregex '.*\.(c|h|cc|cpp|S|java|xml|sh|mk|aidl)' -print0 | xargs -0 grep --color -n "$@" } ;; *) function sgrep() { find . -name .repo -prune -o -name .git -prune -o -type f -iregex '.*\.\(c\|h\|cc\|cpp\|S\|java\|xml\|sh\|mk\|aidl\)' -print0 | xargs -0 grep --color -n "$@" } ;; esac function gettargetarch { get_build_var TARGET_ARCH } function ggrep() { find . -name .repo -prune -o -name .git -prune -o -name out -prune -o -type f -name "*\.gradle" -print0 | xargs -0 grep --color -n "$@" } function jgrep() { find . -name .repo -prune -o -name .git -prune -o -name out -prune -o -type f -name "*\.java" -print0 | xargs -0 grep --color -n "$@" } function cgrep() { find . -name .repo -prune -o -name .git -prune -o -name out -prune -o -type f \( -name '*.c' -o -name '*.cc' -o -name '*.cpp' -o -name '*.h' -o -name '*.hpp' \) -print0 | xargs -0 grep --color -n "$@" } function resgrep() { for dir in `find . -name .repo -prune -o -name .git -prune -o -name out -prune -o -name res -type d`; do find $dir -type f -name '*\.xml' -print0 | xargs -0 grep --color -n "$@"; done; } function mangrep() { find . -name .repo -prune -o -name .git -prune -o -path ./out -prune -o -type f -name 'AndroidManifest.xml' -print0 | xargs -0 grep --color -n "$@" } function sepgrep() { find . -name .repo -prune -o -name .git -prune -o -path ./out -prune -o -name sepolicy -type d -print0 | xargs -0 grep --color -n -r --exclude-dir=\.git "$@" } function rcgrep() { find . -name .repo -prune -o -name .git -prune -o -name out -prune -o -type f -name "*\.rc*" -print0 | xargs -0 grep --color -n "$@" } case `uname -s` in Darwin) function mgrep() { find -E . -name .repo -prune -o -name .git -prune -o -path ./out -prune -o -type f -iregex '.*/(Makefile|Makefile\..*|.*\.make|.*\.mak|.*\.mk)' -print0 | xargs -0 grep --color -n "$@" } function treegrep() { find -E . -name .repo -prune -o -name .git -prune -o -type f -iregex '.*\.(c|h|cpp|S|java|xml)' -print0 | xargs -0 grep --color -n -i "$@" } ;; *) function mgrep() { find . -name .repo -prune -o -name .git -prune -o -path ./out -prune -o -regextype posix-egrep -iregex '(.*\/Makefile|.*\/Makefile\..*|.*\.make|.*\.mak|.*\.mk)' -type f -print0 | xargs -0 grep --color -n "$@" } function treegrep() { find . -name .repo -prune -o -name .git -prune -o -regextype posix-egrep -iregex '.*\.(c|h|cpp|S|java|xml)' -type f -print0 | xargs -0 grep --color -n -i "$@" } ;; esac function getprebuilt { get_abs_build_var ANDROID_PREBUILTS } function tracedmdump() { T=$(gettop) if [ ! "$T" ]; then echo "Couldn't locate the top of the tree. Try setting TOP." return fi local prebuiltdir=$(getprebuilt) local arch=$(gettargetarch) local KERNEL=$T/prebuilts/qemu-kernel/$arch/vmlinux-qemu local TRACE=$1 if [ ! "$TRACE" ] ; then echo "usage: tracedmdump tracename" return fi if [ ! -r "$KERNEL" ] ; then echo "Error: cannot find kernel: '$KERNEL'" return fi local BASETRACE=$(basename $TRACE) if [ "$BASETRACE" = "$TRACE" ] ; then TRACE=$ANDROID_PRODUCT_OUT/traces/$TRACE fi echo "post-processing traces..." rm -f $TRACE/qtrace.dexlist post_trace $TRACE if [ $? -ne 0 ]; then echo "***" echo "*** Error: malformed trace. Did you remember to exit the emulator?" echo "***" return fi echo "generating dexlist output..." /bin/ls $ANDROID_PRODUCT_OUT/system/framework/*.jar $ANDROID_PRODUCT_OUT/system/app/*.apk $ANDROID_PRODUCT_OUT/data/app/*.apk 2>/dev/null | xargs dexlist > $TRACE/qtrace.dexlist echo "generating dmtrace data..." q2dm -r $ANDROID_PRODUCT_OUT/symbols $TRACE $KERNEL $TRACE/dmtrace || return echo "generating html file..." dmtracedump -h $TRACE/dmtrace >| $TRACE/dmtrace.html || return echo "done, see $TRACE/dmtrace.html for details" echo "or run:" echo " traceview $TRACE/dmtrace" } # communicate with a running device or emulator, set up necessary state, # and run the hat command. function runhat() { # process standard adb options local adbTarget="" if [ "$1" = "-d" -o "$1" = "-e" ]; then adbTarget=$1 shift 1 elif [ "$1" = "-s" ]; then adbTarget="$1 $2" shift 2 fi local adbOptions=${adbTarget} #echo adbOptions = ${adbOptions} # runhat options local targetPid=$1 if [ "$targetPid" = "" ]; then echo "Usage: runhat [ -d | -e | -s serial ] target-pid" return fi # confirm hat is available if [ -z $(which hat) ]; then echo "hat is not available in this configuration." return fi # issue "am" command to cause the hprof dump local devFile=/data/local/tmp/hprof-$targetPid echo "Poking $targetPid and waiting for data..." echo "Storing data at $devFile" adb ${adbOptions} shell am dumpheap $targetPid $devFile echo "Press enter when logcat shows \"hprof: heap dump completed\"" echo -n "> " read local localFile=/tmp/$$-hprof echo "Retrieving file $devFile..." adb ${adbOptions} pull $devFile $localFile adb ${adbOptions} shell rm $devFile echo "Running hat on $localFile" echo "View the output by pointing your browser at http://localhost:7000/" echo "" hat -JXmx512m $localFile } function getbugreports() { local reports=(`adb shell ls /sdcard/bugreports | tr -d '\r'`) if [ ! "$reports" ]; then echo "Could not locate any bugreports." return fi local report for report in ${reports[@]} do echo "/sdcard/bugreports/${report}" adb pull /sdcard/bugreports/${report} ${report} gunzip ${report} done } function getsdcardpath() { adb ${adbOptions} shell echo -n \$\{EXTERNAL_STORAGE\} } function getscreenshotpath() { echo "$(getsdcardpath)/Pictures/Screenshots" } function getlastscreenshot() { local screenshot_path=$(getscreenshotpath) local screenshot=`adb ${adbOptions} ls ${screenshot_path} | grep Screenshot_[0-9-]*.*\.png | sort -rk 3 | cut -d " " -f 4 | head -n 1` if [ "$screenshot" = "" ]; then echo "No screenshots found." return fi echo "${screenshot}" adb ${adbOptions} pull ${screenshot_path}/${screenshot} } function startviewserver() { local port=4939 if [ $# -gt 0 ]; then port=$1 fi adb shell service call window 1 i32 $port } function stopviewserver() { adb shell service call window 2 } function isviewserverstarted() { adb shell service call window 3 } function key_home() { adb shell input keyevent 3 } function key_back() { adb shell input keyevent 4 } function key_menu() { adb shell input keyevent 82 } function smoketest() { if [ ! "$ANDROID_PRODUCT_OUT" ]; then echo "Couldn't locate output files. Try running 'lunch' first." >&2 return fi T=$(gettop) if [ ! "$T" ]; then echo "Couldn't locate the top of the tree. Try setting TOP." >&2 return fi (\cd "$T" && mmm tests/SmokeTest) && adb uninstall com.android.smoketest > /dev/null && adb uninstall com.android.smoketest.tests > /dev/null && adb install $ANDROID_PRODUCT_OUT/data/app/SmokeTestApp.apk && adb install $ANDROID_PRODUCT_OUT/data/app/SmokeTest.apk && adb shell am instrument -w com.android.smoketest.tests/android.test.InstrumentationTestRunner } # simple shortcut to the runtest command function runtest() { T=$(gettop) if [ ! "$T" ]; then echo "Couldn't locate the top of the tree. Try setting TOP." >&2 return fi ("$T"/development/testrunner/runtest.py $@) } function godir () { if [[ -z "$1" ]]; then echo "Usage: godir " return fi T=$(gettop) if [ ! "$OUT_DIR" = "" ]; then mkdir -p $OUT_DIR FILELIST=$OUT_DIR/filelist else FILELIST=$T/filelist fi if [[ ! -f $FILELIST ]]; then echo -n "Creating index..." (\cd $T; find . -wholename ./out -prune -o -wholename ./.repo -prune -o -type f > $FILELIST) echo " Done" echo "" fi local lines lines=($(\grep "$1" $FILELIST | sed -e 's/\/[^/]*$//' | sort | uniq)) if [[ ${#lines[@]} = 0 ]]; then echo "Not found" return fi local pathname local choice if [[ ${#lines[@]} > 1 ]]; then while [[ -z "$pathname" ]]; do local index=1 local line for line in ${lines[@]}; do printf "%6s %s\n" "[$index]" $line index=$(($index + 1)) done echo echo -n "Select one: " unset choice read choice if [[ $choice -gt ${#lines[@]} || $choice -lt 1 ]]; then echo "Invalid choice" continue fi pathname=${lines[$(($choice-1))]} done else pathname=${lines[0]} fi \cd $T/$pathname } function cmremote() { if ! git rev-parse --git-dir &> /dev/null then echo ".git directory not found. Please run this from the root directory of the Android repository you wish to set up." return 1 fi git remote rm cmremote 2> /dev/null GERRIT_REMOTE=$(git config --get remote.github.projectname) CMUSER=$(git config --get review.review.lineageos.org.username) if [ -z "$CMUSER" ] then git remote add cmremote ssh://review.lineageos.org:29418/$GERRIT_REMOTE else git remote add cmremote ssh://$CMUSER@review.lineageos.org:29418/$GERRIT_REMOTE fi echo "Remote 'cmremote' created" } function aospremote() { if ! git rev-parse --git-dir &> /dev/null then echo ".git directory not found. Please run this from the root directory of the Android repository you wish to set up." return 1 fi git remote rm aosp 2> /dev/null PROJECT=$(pwd -P | sed -e "s#$ANDROID_BUILD_TOP\/##; s#-caf.*##; s#\/default##") if (echo $PROJECT | grep -qv "^device") then PFX="platform/" fi git remote add aosp https://android.googlesource.com/$PFX$PROJECT echo "Remote 'aosp' created" } function cafremote() { if ! git rev-parse --git-dir &> /dev/null then echo ".git directory not found. Please run this from the root directory of the Android repository you wish to set up." return 1 fi git remote rm caf 2> /dev/null PROJECT=$(pwd -P | sed -e "s#$ANDROID_BUILD_TOP\/##; s#-caf.*##; s#\/default##") if (echo $PROJECT | grep -qv "^device") then PFX="platform/" fi git remote add caf https://source.codeaurora.org/quic/la/$PFX$PROJECT echo "Remote 'caf' created" } function installboot() { if [ ! -e "$OUT/recovery/root/etc/recovery.fstab" ]; then echo "No recovery.fstab found. Build recovery first." return 1 fi if [ ! -e "$OUT/boot.img" ]; then echo "No boot.img found. Run make bootimage first." return 1 fi PARTITION=`grep "^\/boot" $OUT/recovery/root/etc/recovery.fstab | awk {'print $3'}` if [ -z "$PARTITION" ]; then # Try for RECOVERY_FSTAB_VERSION = 2 PARTITION=`grep "[[:space:]]\/boot[[:space:]]" $OUT/recovery/root/etc/recovery.fstab | awk {'print $1'}` PARTITION_TYPE=`grep "[[:space:]]\/boot[[:space:]]" $OUT/recovery/root/etc/recovery.fstab | awk {'print $3'}` if [ -z "$PARTITION" ]; then echo "Unable to determine boot partition." return 1 fi fi adb start-server adb wait-for-online adb root sleep 1 adb wait-for-online shell mount /system 2>&1 > /dev/null adb wait-for-online remount if (adb shell getprop ro.cm.device | grep -q "$CM_BUILD"); then adb push $OUT/boot.img /cache/ for i in $OUT/system/lib/modules/*; do adb push $i /system/lib/modules/ done adb shell dd if=/cache/boot.img of=$PARTITION adb shell chmod 644 /system/lib/modules/* echo "Installation complete." else echo "The connected device does not appear to be $CM_BUILD, run away!" fi } function installrecovery() { if [ ! -e "$OUT/recovery/root/etc/recovery.fstab" ]; then echo "No recovery.fstab found. Build recovery first." return 1 fi if [ ! -e "$OUT/recovery.img" ]; then echo "No recovery.img found. Run make recoveryimage first." return 1 fi PARTITION=`grep "^\/recovery" $OUT/recovery/root/etc/recovery.fstab | awk {'print $3'}` if [ -z "$PARTITION" ]; then # Try for RECOVERY_FSTAB_VERSION = 2 PARTITION=`grep "[[:space:]]\/recovery[[:space:]]" $OUT/recovery/root/etc/recovery.fstab | awk {'print $1'}` PARTITION_TYPE=`grep "[[:space:]]\/recovery[[:space:]]" $OUT/recovery/root/etc/recovery.fstab | awk {'print $3'}` if [ -z "$PARTITION" ]; then echo "Unable to determine recovery partition." return 1 fi fi adb start-server adb wait-for-online adb root sleep 1 adb wait-for-online shell mount /system 2>&1 >> /dev/null adb wait-for-online remount if (adb shell getprop ro.cm.device | grep -q "$CM_BUILD"); then adb push $OUT/recovery.img /cache/ adb shell dd if=/cache/recovery.img of=$PARTITION echo "Installation complete." else echo "The connected device does not appear to be $CM_BUILD, run away!" fi } function makerecipe() { if [ -z "$1" ] then echo "No branch name provided." return 1 fi cd android sed -i s/'default revision=.*'/'default revision="refs\/heads\/'$1'"'/ default.xml git commit -a -m "$1" cd .. repo forall -c ' if [ "$REPO_REMOTE" = "github" ] then pwd cmremote git push cmremote HEAD:refs/heads/'$1' fi ' } function cmgerrit() { if [ "$(__detect_shell)" = "zsh" ]; then # zsh does not define FUNCNAME, derive from funcstack local FUNCNAME=$funcstack[1] fi if [ $# -eq 0 ]; then $FUNCNAME help return 1 fi local user=`git config --get review.review.lineageos.org.username` local review=`git config --get remote.github.review` local project=`git config --get remote.github.projectname` local command=$1 shift case $command in help) if [ $# -eq 0 ]; then cat <&2 "Gerrit username not found." return 1 fi local local_branch remote_branch case $1 in *:*) local_branch=${1%:*} remote_branch=${1##*:} ;; *) local_branch=HEAD remote_branch=$1 ;; esac shift git push $@ ssh://$user@$review:29418/$project \ $local_branch:refs/for/$remote_branch || return 1 ;; changes|for) if [ "$FUNCNAME" = "cmgerrit" ]; then echo >&2 "'$FUNCNAME $command' is deprecated." fi ;; __cmg_err_no_arg) if [ $# -lt 2 ]; then echo >&2 "'$FUNCNAME $command' missing argument." elif [ $2 -eq 0 ]; then if [ -n "$3" ]; then $FUNCNAME help $1 else echo >&2 "'$FUNCNAME $1' missing argument." fi else return 1 fi ;; __cmg_err_not_repo) if [ -z "$review" -o -z "$project" ]; then echo >&2 "Not currently in any reviewable repository." else return 1 fi ;; __cmg_err_not_supported) $FUNCNAME __cmg_err_no_arg $command $# && return case $1 in #TODO: filter more git commands that don't use refname init|add|rm|mv|status|clone|remote|bisect|config|stash) echo >&2 "'$FUNCNAME $1' is not supported." ;; *) return 1 ;; esac ;; #TODO: other special cases? *) $FUNCNAME __cmg_err_not_supported $command && return 1 $FUNCNAME __cmg_err_no_arg $command $# help && return 1 $FUNCNAME __cmg_err_not_repo && return 1 local args="$@" local change pre_args refs_arg post_args case "$args" in *--\ *) pre_args=${args%%-- *} post_args="-- ${args#*-- }" ;; *) pre_args="$args" ;; esac args=($pre_args) pre_args= if [ ${#args[@]} -gt 0 ]; then change=${args[${#args[@]}-1]} fi if [ ${#args[@]} -gt 1 ]; then pre_args=${args[0]} for ((i=1; i<${#args[@]}-1; i++)); do pre_args="$pre_args ${args[$i]}" done fi while ((1)); do case $change in ""|--) $FUNCNAME help $command return 1 ;; *@*) if [ -z "$refs_arg" ]; then refs_arg="@${change#*@}" change=${change%%@*} fi ;; *~*) if [ -z "$refs_arg" ]; then refs_arg="~${change#*~}" change=${change%%~*} fi ;; *^*) if [ -z "$refs_arg" ]; then refs_arg="^${change#*^}" change=${change%%^*} fi ;; *:*) if [ -z "$refs_arg" ]; then refs_arg=":${change#*:}" change=${change%%:*} fi ;; *) break ;; esac done $FUNCNAME fetch $change \ && git $command $pre_args FETCH_HEAD$refs_arg $post_args \ || return 1 ;; esac } function cmrebase() { local repo=$1 local refs=$2 local pwd="$(pwd)" local dir="$(gettop)/$repo" if [ -z $repo ] || [ -z $refs ]; then echo "LineageOS Gerrit Rebase Usage: " echo " cmrebase " echo " The patch IDs appear on the Gerrit commands that are offered." echo " They consist on a series of numbers and slashes, after the text" echo " refs/changes. For example, the ID in the following command is 26/8126/2" echo "" echo " git[...]ges_apps_Camera refs/changes/26/8126/2 && git cherry-pick FETCH_HEAD" echo "" return fi if [ ! -d $dir ]; then echo "Directory $dir doesn't exist in tree." return fi cd $dir repo=$(cat .git/config | grep git://github.com | awk '{ print $NF }' | sed s#git://github.com/##g) echo "Starting branch..." repo start tmprebase . echo "Bringing it up to date..." repo sync . echo "Fetching change..." git fetch "http://review.lineageos.org/p/$repo" "refs/changes/$refs" && git cherry-pick FETCH_HEAD if [ "$?" != "0" ]; then echo "Error cherry-picking. Not uploading!" return fi echo "Uploading..." repo upload . echo "Cleaning up..." repo abandon tmprebase . cd $pwd } function mka() { local T=$(gettop) if [ "$T" ]; then case `uname -s` in Darwin) make -C $T -j `sysctl hw.ncpu|cut -d" " -f2` "$@" ;; *) mk_timer schedtool -B -n 1 -e ionice -n 1 make -C $T -j$(cat /proc/cpuinfo | grep "^processor" | wc -l) "$@" ;; esac else echo "Couldn't locate the top of the tree. Try setting TOP." fi } function cmka() { if [ ! -z "$1" ]; then for i in "$@"; do case $i in bacon|otapackage|systemimage) mka installclean mka $i ;; *) mka clean-$i mka $i ;; esac done else mka clean mka fi } function mms() { local T=$(gettop) if [ -z "$T" ] then echo "Couldn't locate the top of the tree. Try setting TOP." return 1 fi case `uname -s` in Darwin) local NUM_CPUS=$(sysctl hw.ncpu|cut -d" " -f2) ONE_SHOT_MAKEFILE="__none__" \ make -C $T -j $NUM_CPUS "$@" ;; *) local NUM_CPUS=$(cat /proc/cpuinfo | grep "^processor" | wc -l) ONE_SHOT_MAKEFILE="__none__" \ mk_timer schedtool -B -n 1 -e ionice -n 1 \ make -C $T -j $NUM_CPUS "$@" ;; esac } function repolastsync() { RLSPATH="$ANDROID_BUILD_TOP/.repo/.repo_fetchtimes.json" RLSLOCAL=$(date -d "$(stat -c %z $RLSPATH)" +"%e %b %Y, %T %Z") RLSUTC=$(date -d "$(stat -c %z $RLSPATH)" -u +"%e %b %Y, %T %Z") echo "Last repo sync: $RLSLOCAL / $RLSUTC" } function reposync() { case `uname -s` in Darwin) repo sync -j 4 "$@" ;; *) schedtool -B -n 1 -e ionice -n 1 `which repo` sync -j 4 "$@" ;; esac } function repodiff() { if [ -z "$*" ]; then echo "Usage: repodiff [[ref-to] [--numstat]]" return fi diffopts=$* repo forall -c \ 'echo "$REPO_PATH ($REPO_REMOTE)"; git diff ${diffopts} 2>/dev/null ;' } # Return success if adb is up and not in recovery function _adb_connected { { if [[ "$(adb get-state)" == device && "$(adb shell test -e /sbin/recovery; echo $?)" == 0 ]] then return 0 fi } 2>/dev/null return 1 }; # Credit for color strip sed: http://goo.gl/BoIcm function dopush() { local func=$1 shift adb start-server # Prevent unexpected starting server message from adb get-state in the next line if ! _adb_connected; then echo "No device is online. Waiting for one..." echo "Please connect USB and/or enable USB debugging" until _adb_connected; do sleep 1 done echo "Device Found." fi if (adb shell getprop ro.cm.device | grep -q "$CM_BUILD") || [ "$FORCE_PUSH" = "true" ]; then # retrieve IP and PORT info if we're using a TCP connection TCPIPPORT=$(adb devices | egrep '^[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+:[0-9]+[^0-9]+' \ | head -1 | awk '{print $1}') adb root &> /dev/null sleep 0.3 if [ -n "$TCPIPPORT" ] then # adb root just killed our connection # so reconnect... adb connect "$TCPIPPORT" fi adb wait-for-device &> /dev/null sleep 0.3 adb remount &> /dev/null mkdir -p $OUT ($func $*|tee $OUT/.log;return ${PIPESTATUS[0]}) ret=$?; if [ $ret -ne 0 ]; then rm -f $OUT/.log;return $ret fi # Install: if [ `uname` = "Linux" ]; then LOC="$(cat $OUT/.log | sed -r 's/\x1B\[([0-9]{1,2}(;[0-9]{1,2})?)?[m|K]//g' | grep '^Install: ' | cut -d ':' -f 2)" else LOC="$(cat $OUT/.log | sed -E "s/"$'\E'"\[([0-9]{1,3}((;[0-9]{1,3})*)?)?[m|K]//g" | grep '^Install: ' | cut -d ':' -f 2)" fi # Copy: if [ `uname` = "Linux" ]; then LOC="$LOC $(cat $OUT/.log | sed -r 's/\x1B\[([0-9]{1,2}(;[0-9]{1,2})?)?[m|K]//g' | grep '^Copy: ' | cut -d ':' -f 2)" else LOC="$LOC $(cat $OUT/.log | sed -E "s/"$'\E'"\[([0-9]{1,3}((;[0-9]{1,3})*)?)?[m|K]//g" | grep '^Copy: ' | cut -d ':' -f 2)" fi # If any files are going to /data, push an octal file permissions reader to device if [ -n "$(echo $LOC | egrep '(^|\s)/data')" ]; then CHKPERM="/data/local/tmp/chkfileperm.sh" ( cat <<'EOF' #!/system/xbin/sh FILE=$@ if [ -e $FILE ]; then ls -l $FILE | awk '{k=0;for(i=0;i<=8;i++)k+=((substr($1,i+2,1)~/[rwx]/)*2^(8-i));if(k)printf("%0o ",k);print}' | cut -d ' ' -f1 fi EOF ) > $OUT/.chkfileperm.sh echo "Pushing file permissions checker to device" adb push $OUT/.chkfileperm.sh $CHKPERM adb shell chmod 755 $CHKPERM rm -f $OUT/.chkfileperm.sh fi stop_n_start=false for FILE in $(echo $LOC | tr " " "\n"); do # Make sure file is in $OUT/system or $OUT/data case $FILE in $OUT/system/*|$OUT/data/*) # Get target file name (i.e. /system/bin/adb) TARGET=$(echo $FILE | sed "s#$OUT##") ;; *) continue ;; esac case $TARGET in /data/*) # fs_config only sets permissions and se labels for files pushed to /system if [ -n "$CHKPERM" ]; then OLDPERM=$(adb shell $CHKPERM $TARGET) OLDPERM=$(echo $OLDPERM | tr -d '\r' | tr -d '\n') OLDOWN=$(adb shell ls -al $TARGET | awk '{print $2}') OLDGRP=$(adb shell ls -al $TARGET | awk '{print $3}') fi echo "Pushing: $TARGET" adb push $FILE $TARGET if [ -n "$OLDPERM" ]; then echo "Setting file permissions: $OLDPERM, $OLDOWN":"$OLDGRP" adb shell chown "$OLDOWN":"$OLDGRP" $TARGET adb shell chmod "$OLDPERM" $TARGET else echo "$TARGET did not exist previously, you should set file permissions manually" fi adb shell restorecon "$TARGET" ;; /system/priv-app/SystemUI/SystemUI.apk|/system/framework/*) # Only need to stop services once if ! $stop_n_start; then adb shell stop stop_n_start=true fi echo "Pushing: $TARGET" adb push $FILE $TARGET ;; *) echo "Pushing: $TARGET" adb push $FILE $TARGET ;; esac done if [ -n "$CHKPERM" ]; then adb shell rm $CHKPERM fi if $stop_n_start; then adb shell start fi rm -f $OUT/.log return 0 else echo "The connected device does not appear to be $CM_BUILD, run away!" fi } alias mmp='dopush mm' alias mmmp='dopush mmm' alias mmap='dopush mma' alias mkap='dopush mka' alias cmkap='dopush cmka' function repopick() { T=$(gettop) $T/build/tools/repopick.py $@ } function fixup_common_out_dir() { common_out_dir=$(get_build_var OUT_DIR)/target/common target_device=$(get_build_var TARGET_DEVICE) if [ ! -z $CM_FIXUP_COMMON_OUT ]; then if [ -d ${common_out_dir} ] && [ ! -L ${common_out_dir} ]; then mv ${common_out_dir} ${common_out_dir}-${target_device} ln -s ${common_out_dir}-${target_device} ${common_out_dir} else [ -L ${common_out_dir} ] && rm ${common_out_dir} mkdir -p ${common_out_dir}-${target_device} ln -s ${common_out_dir}-${target_device} ${common_out_dir} fi else [ -L ${common_out_dir} ] && rm ${common_out_dir} mkdir -p ${common_out_dir} fi } # Force JAVA_HOME to point to java 1.7/1.8 if it isn't already set. function set_java_home() { # Clear the existing JAVA_HOME value if we set it ourselves, so that # we can reset it later, depending on the version of java the build # system needs. # # If we don't do this, the JAVA_HOME value set by the first call to # build/envsetup.sh will persist forever. if [ -n "$ANDROID_SET_JAVA_HOME" ]; then export JAVA_HOME="" fi if [ ! "$JAVA_HOME" ]; then if [ ! "$EXPERIMENTAL_USE_JAVA8" ]; then case `uname -s` in Darwin) export JAVA_HOME=$(/usr/libexec/java_home -v 1.7) ;; *) export JAVA_HOME=/usr/lib/jvm/java-7-openjdk-amd64 ;; esac fi if [ ! "$JAVA_HOME" ] || [ ! -d "$JAVA_HOME" ]; then case `uname -s` in Darwin) export JAVA_HOME=$(/usr/libexec/java_home -v 1.8) ;; *) export JAVA_HOME=/usr/lib/jvm/java-8-openjdk-amd64 ;; esac fi # Keep track of the fact that we set JAVA_HOME ourselves, so that # we can change it on the next envsetup.sh, if required. export ANDROID_SET_JAVA_HOME=true fi } # Print colored exit condition function pez { "$@" local retval=$? if [ $retval -ne 0 ] then printf "\e[0;31mFAILURE\e[00m\n" else printf "\e[0;32mSUCCESS\e[00m\n" fi return $retval } function get_make_command() { echo command make } function mk_timer() { local start_time=$(date +"%s") $@ local ret=$? local end_time=$(date +"%s") local tdiff=$(($end_time-$start_time)) local hours=$(($tdiff / 3600 )) local mins=$((($tdiff % 3600) / 60)) local secs=$(($tdiff % 60)) local ncolors=$(tput colors 2>/dev/null) if [ -n "$ncolors" ] && [ $ncolors -ge 8 ]; then color_failed="\e[0;31m" color_success="\e[0;32m" color_reset="\e[0m" else color_failed="" color_success="" color_reset="" fi echo if [ $ret -eq 0 ] ; then printf "${color_success}#### make completed successfully " else printf "${color_failed}#### make failed to build some targets " fi if [ $hours -gt 0 ] ; then printf "(%02g:%02g:%02g (hh:mm:ss))" $hours $mins $secs elif [ $mins -gt 0 ] ; then printf "(%02g:%02g (mm:ss))" $mins $secs elif [ $secs -gt 0 ] ; then printf "(%s seconds)" $secs fi printf " ####${color_reset}\n\n" return $ret } function make() { mk_timer $(get_make_command) "$@" } function __detect_shell() { case `ps -o command -p $$` in *bash*) echo bash ;; *zsh*) echo zsh ;; *) echo unknown return 1 ;; esac return } if ! __detect_shell > /dev/null; then echo "WARNING: Only bash and zsh are supported, use of other shell may lead to erroneous results" fi # Execute the contents of any vendorsetup.sh files we can find. for f in `test -d device && find -L device -maxdepth 4 -name 'vendorsetup.sh' 2> /dev/null | sort` \ `test -d vendor && find -L vendor -maxdepth 4 -name 'vendorsetup.sh' 2> /dev/null | sort` do echo "including $f" . $f done unset f # Add completions check_bash_version && { dirs="sdk/bash_completion vendor/replicant/bash_completion" for dir in $dirs; do if [ -d ${dir} ]; then for f in `/bin/ls ${dir}/[a-z]*.bash 2> /dev/null`; do echo "including $f" . $f done fi done } export ANDROID_BUILD_TOP=$(gettop) export WITH_SU=true