diff options
Diffstat (limited to 'nand_spl')
| -rw-r--r-- | nand_spl/nand_boot.c | 50 |
1 files changed, 20 insertions, 30 deletions
diff --git a/nand_spl/nand_boot.c b/nand_spl/nand_boot.c index 0f56ba520..81b4dfc54 100644 --- a/nand_spl/nand_boot.c +++ b/nand_spl/nand_boot.c @@ -37,7 +37,6 @@ static int nand_command(struct mtd_info *mtd, int block, int page, int offs, u8 { struct nand_chip *this = mtd->priv; int page_addr = page + block * CFG_NAND_PAGE_COUNT; - int ctrl = NAND_CTRL_CLE | NAND_CTRL_CHANGE; if (this->dev_ready) while (!this->dev_ready(mtd)) @@ -46,18 +45,15 @@ static int nand_command(struct mtd_info *mtd, int block, int page, int offs, u8 CFG_NAND_READ_DELAY; /* Begin command latch cycle */ - this->cmd_ctrl(mtd, cmd, ctrl); + this->cmd_ctrl(mtd, cmd, NAND_CTRL_CLE | NAND_CTRL_CHANGE); /* Set ALE and clear CLE to start address cycle */ - ctrl = NAND_CTRL_ALE | NAND_CTRL_CHANGE; /* Column address */ - this->cmd_ctrl(mtd, offs, ctrl); - ctrl &= ~NAND_CTRL_CHANGE; - this->cmd_ctrl(mtd, (u8)(page_addr & 0xff), ctrl); /* A[16:9] */ - ctrl &= ~NAND_CTRL_CHANGE; - this->cmd_ctrl(mtd, (u8)((page_addr >> 8) & 0xff), ctrl); /* A[24:17] */ + this->cmd_ctrl(mtd, offs, NAND_CTRL_ALE | NAND_CTRL_CHANGE); + this->cmd_ctrl(mtd, page_addr & 0xff, 0); /* A[16:9] */ + this->cmd_ctrl(mtd, (page_addr >> 8) & 0xff, 0); /* A[24:17] */ #ifdef CFG_NAND_4_ADDR_CYCLE /* One more address cycle for devices > 32MiB */ - this->cmd_ctrl(mtd, (u8)((page_addr >> 16) & 0x0f), ctrl); /* A[xx:25] */ + this->cmd_ctrl(mtd, (page_addr >> 16) & 0x0f, 0); /* A[28:25] */ #endif /* Latch in address */ this->cmd_ctrl(mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE); @@ -80,51 +76,45 @@ static int nand_command(struct mtd_info *mtd, int block, int page, int offs, u8 static int nand_command(struct mtd_info *mtd, int block, int page, int offs, u8 cmd) { struct nand_chip *this = mtd->priv; - int page_offs = offs; int page_addr = page + block * CFG_NAND_PAGE_COUNT; if (this->dev_ready) - this->dev_ready(mtd); + while (!this->dev_ready(mtd)) + ; else CFG_NAND_READ_DELAY; /* Emulate NAND_CMD_READOOB */ if (cmd == NAND_CMD_READOOB) { - page_offs += CFG_NAND_PAGE_SIZE; + offs += CFG_NAND_PAGE_SIZE; cmd = NAND_CMD_READ0; } /* Begin command latch cycle */ - this->hwcontrol(mtd, NAND_CTL_SETCLE); - this->write_byte(mtd, cmd); + this->cmd_ctrl(mtd, cmd, NAND_CTRL_CLE | NAND_CTRL_CHANGE); /* Set ALE and clear CLE to start address cycle */ - this->hwcontrol(mtd, NAND_CTL_CLRCLE); - this->hwcontrol(mtd, NAND_CTL_SETALE); /* Column address */ - this->write_byte(mtd, page_offs & 0xff); /* A[7:0] */ - this->write_byte(mtd, (uchar)((page_offs >> 8) & 0xff)); /* A[11:9] */ + this->cmd_ctrl(mtd, offs & 0xff, + NAND_CTRL_ALE | NAND_CTRL_CHANGE); /* A[7:0] */ + this->cmd_ctrl(mtd, (offs >> 8) & 0xff, 0); /* A[11:9] */ /* Row address */ - this->write_byte(mtd, (uchar)(page_addr & 0xff)); /* A[19:12] */ - this->write_byte(mtd, (uchar)((page_addr >> 8) & 0xff)); /* A[27:20] */ + this->cmd_ctrl(mtd, (page_addr & 0xff), 0); /* A[19:12] */ + this->cmd_ctrl(mtd, ((page_addr >> 8) & 0xff), 0); /* A[27:20] */ #ifdef CFG_NAND_5_ADDR_CYCLE /* One more address cycle for devices > 128MiB */ - this->write_byte(mtd, (uchar)((page_addr >> 16) & 0x0f)); /* A[xx:28] */ + this->cmd_ctrl(mtd, (page_addr >> 16) & 0x0f, 0); /* A[31:28] */ #endif /* Latch in address */ - this->hwcontrol(mtd, NAND_CTL_CLRALE); - - /* Begin command latch cycle */ - this->hwcontrol(mtd, NAND_CTL_SETCLE); - /* Write out the start read command */ - this->write_byte(mtd, NAND_CMD_READSTART); - /* End command latch cycle */ - this->hwcontrol(mtd, NAND_CTL_CLRCLE); + this->cmd_ctrl(mtd, NAND_CMD_READSTART, + NAND_CTRL_CLE | NAND_CTRL_CHANGE); + this->cmd_ctrl(mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE); /* * Wait a while for the data to be ready */ if (this->dev_ready) - this->dev_ready(mtd); + while (!this->dev_ready(mtd)) + ; else CFG_NAND_READ_DELAY; |