/* libs/diskconfig/diskconfig.c * * Copyright 2008, The Android Open Source Project * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ #define LOG_TAG "diskconfig" #include #include #include #include #include #include #include #include #include #include #include #include #include static int parse_len(const char *str, uint64_t *plen) { char tmp[64]; int len_str; uint32_t multiple = 1; strncpy(tmp, str, sizeof(tmp)); tmp[sizeof(tmp)-1] = '\0'; len_str = strlen(tmp); if (!len_str) { ALOGE("Invalid disk length specified."); return 1; } switch(tmp[len_str - 1]) { case 'M': case 'm': /* megabyte */ multiple <<= 10; case 'K': case 'k': /* kilobytes */ multiple <<= 10; tmp[len_str - 1] = '\0'; break; default: break; } *plen = strtoull(tmp, NULL, 0); if (!*plen) { ALOGE("Invalid length specified: %s", str); return 1; } if (*plen == (uint64_t)-1) { if (multiple > 1) { ALOGE("Size modifier illegal when len is -1"); return 1; } } else { /* convert len to kilobytes */ if (multiple > 1024) multiple >>= 10; *plen *= multiple; if (*plen > 0xffffffffULL) { ALOGE("Length specified is too large!: %"PRIu64" KB", *plen); return 1; } } return 0; } static int load_partitions(cnode *root, struct disk_info *dinfo) { cnode *partnode; dinfo->num_parts = 0; for (partnode = root->first_child; partnode; partnode = partnode->next) { struct part_info *pinfo = &dinfo->part_lst[dinfo->num_parts]; const char *tmp; /* bleh, i will leak memory here, but i DONT CARE since * the only right thing to do when this function fails * is to quit */ pinfo->name = strdup(partnode->name); if(config_bool(partnode, "active", 0)) pinfo->flags |= PART_ACTIVE_FLAG; if (!(tmp = config_str(partnode, "type", NULL))) { ALOGE("Partition type required: %s", pinfo->name); return 1; } /* possible values are: linux, fat32 */ if (!strcmp(tmp, "linux")) { pinfo->type = PC_PART_TYPE_LINUX; } else if (!strcmp(tmp, "fat32")) { pinfo->type = PC_PART_TYPE_FAT32; } else { ALOGE("Unsupported partition type found: %s", tmp); return 1; } if ((tmp = config_str(partnode, "len", NULL)) != NULL) { uint64_t len; if (parse_len(tmp, &len)) return 1; pinfo->len_kb = (uint32_t) len; } else pinfo->len_kb = 0; ++dinfo->num_parts; } return 0; } struct disk_info * load_diskconfig(const char *fn, char *path_override) { struct disk_info *dinfo; cnode *devroot; cnode *partnode; cnode *root = config_node("", ""); const char *tmp; if (!(dinfo = malloc(sizeof(struct disk_info)))) { ALOGE("Could not malloc disk_info"); return NULL; } memset(dinfo, 0, sizeof(struct disk_info)); if (!(dinfo->part_lst = malloc(MAX_NUM_PARTS * sizeof(struct part_info)))) { ALOGE("Could not malloc part_lst"); goto fail; } memset(dinfo->part_lst, 0, (MAX_NUM_PARTS * sizeof(struct part_info))); config_load_file(root, fn); if (root->first_child == NULL) { ALOGE("Could not read config file %s", fn); goto fail; } if (!(devroot = config_find(root, "device"))) { ALOGE("Could not find device section in config file '%s'", fn); goto fail; } if (!(tmp = config_str(devroot, "path", path_override))) { ALOGE("device path is requried"); goto fail; } dinfo->device = strdup(tmp); /* find the partition scheme */ if (!(tmp = config_str(devroot, "scheme", NULL))) { ALOGE("partition scheme is required"); goto fail; } else if (!strcmp(tmp, "mbr")) { dinfo->scheme = PART_SCHEME_MBR; } else if (!strcmp(tmp, "gpt")) { ALOGE("'gpt' partition scheme not supported yet."); goto fail; } else { ALOGE("Unknown partition scheme specified: %s", tmp); goto fail; } /* grab the sector size (in bytes) */ tmp = config_str(devroot, "sector_size", "512"); dinfo->sect_size = strtol(tmp, NULL, 0); if (!dinfo->sect_size) { ALOGE("Invalid sector size: %s", tmp); goto fail; } /* first lba where the partitions will start on disk */ if (!(tmp = config_str(devroot, "start_lba", NULL))) { ALOGE("start_lba must be provided"); goto fail; } if (!(dinfo->skip_lba = strtol(tmp, NULL, 0))) { ALOGE("Invalid starting LBA (or zero): %s", tmp); goto fail; } /* Number of LBAs on disk */ if (!(tmp = config_str(devroot, "num_lba", NULL))) { ALOGE("num_lba is required"); goto fail; } dinfo->num_lba = strtoul(tmp, NULL, 0); if (!(partnode = config_find(devroot, "partitions"))) { ALOGE("Device must specify partition list"); goto fail; } if (load_partitions(partnode, dinfo)) goto fail; return dinfo; fail: if (dinfo->part_lst) free(dinfo->part_lst); if (dinfo->device) free(dinfo->device); free(dinfo); return NULL; } static int sync_ptable(int fd) { struct stat stat; int rv; sync(); if (fstat(fd, &stat)) { ALOGE("Cannot stat, errno=%d.", errno); return -1; } if (S_ISBLK(stat.st_mode) && ((rv = ioctl(fd, BLKRRPART, NULL)) < 0)) { ALOGE("Could not re-read partition table. REBOOT!. (errno=%d)", errno); return -1; } return 0; } /* This function verifies that the disk info provided is valid, and if so, * returns an open file descriptor. * * This does not necessarily mean that it will later be successfully written * though. If we use the pc-bios partitioning scheme, we must use extended * partitions, which eat up some hd space. If the user manually provisioned * every single partition, but did not account for the extra needed space, * then we will later fail. * * TODO: Make validation more complete. */ static int validate(struct disk_info *dinfo) { int fd; int sect_sz; uint64_t disk_size; uint64_t total_size; int cnt; struct stat stat; if (!dinfo) return -1; if ((fd = open(dinfo->device, O_RDWR)) < 0) { ALOGE("Cannot open device '%s' (errno=%d)", dinfo->device, errno); return -1; } if (fstat(fd, &stat)) { ALOGE("Cannot stat file '%s', errno=%d.", dinfo->device, errno); goto fail; } /* XXX: Some of the code below is kind of redundant and should probably * be refactored a little, but it will do for now. */ /* Verify that we can operate on the device that was requested. * We presently only support block devices and regular file images. */ if (S_ISBLK(stat.st_mode)) { /* get the sector size and make sure we agree */ if (ioctl(fd, BLKSSZGET, §_sz) < 0) { ALOGE("Cannot get sector size (errno=%d)", errno); goto fail; } if (!sect_sz || sect_sz != dinfo->sect_size) { ALOGE("Device sector size is zero or sector sizes do not match!"); goto fail; } /* allow the user override the "disk size" if they provided num_lba */ if (!dinfo->num_lba) { if (ioctl(fd, BLKGETSIZE64, &disk_size) < 0) { ALOGE("Could not get block device size (errno=%d)", errno); goto fail; } /* XXX: we assume that the disk has < 2^32 sectors :-) */ dinfo->num_lba = (uint32_t)(disk_size / (uint64_t)dinfo->sect_size); } else disk_size = (uint64_t)dinfo->num_lba * (uint64_t)dinfo->sect_size; } else if (S_ISREG(stat.st_mode)) { ALOGI("Requesting operation on a regular file, not block device."); if (!dinfo->sect_size) { ALOGE("Sector size for regular file images cannot be zero"); goto fail; } if (dinfo->num_lba) disk_size = (uint64_t)dinfo->num_lba * (uint64_t)dinfo->sect_size; else { dinfo->num_lba = (uint32_t)(stat.st_size / dinfo->sect_size); disk_size = (uint64_t)stat.st_size; } } else { ALOGE("Device does not refer to a regular file or a block device!"); goto fail; } #if 1 ALOGV("Device/file %s: size=%" PRIu64 " bytes, num_lba=%u, sect_size=%d", dinfo->device, disk_size, dinfo->num_lba, dinfo->sect_size); #endif /* since this is our offset into the disk, we start off with that as * our size of needed partitions */ total_size = dinfo->skip_lba * dinfo->sect_size; /* add up all the partition sizes and make sure it fits */ for (cnt = 0; cnt < dinfo->num_parts; ++cnt) { struct part_info *part = &dinfo->part_lst[cnt]; if (part->len_kb != (uint32_t)-1) { total_size += part->len_kb * 1024; } else if (part->len_kb == 0) { ALOGE("Zero-size partition '%s' is invalid.", part->name); goto fail; } else { /* the partition requests the rest of the disk. */ if (cnt + 1 != dinfo->num_parts) { ALOGE("Only the last partition in the list can request to fill " "the rest of disk."); goto fail; } } if ((part->type != PC_PART_TYPE_LINUX) && (part->type != PC_PART_TYPE_FAT32)) { ALOGE("Unknown partition type (0x%x) encountered for partition " "'%s'\n", part->type, part->name); goto fail; } } /* only matters for disks, not files */ if (S_ISBLK(stat.st_mode) && total_size > disk_size) { ALOGE("Total requested size of partitions (%"PRIu64") is greater than disk " "size (%"PRIu64").", total_size, disk_size); goto fail; } return fd; fail: close(fd); return -1; } static int validate_and_config(struct disk_info *dinfo, int *fd, struct write_list **lst) { *lst = NULL; *fd = -1; if ((*fd = validate(dinfo)) < 0) return 1; switch (dinfo->scheme) { case PART_SCHEME_MBR: *lst = config_mbr(dinfo); return *lst == NULL; case PART_SCHEME_GPT: /* not supported yet */ default: ALOGE("Uknown partition scheme."); break; } close(*fd); *lst = NULL; return 1; } /* validate and process the disk layout configuration. * This will cause an update to the partitions' start lba. * * Basically, this does the same thing as apply_disk_config in test mode, * except that wlist_commit is not called to print out the data to be * written. */ int process_disk_config(struct disk_info *dinfo) { struct write_list *lst; int fd; if (validate_and_config(dinfo, &fd, &lst) != 0) return 1; close(fd); wlist_free(lst); return 0; } int apply_disk_config(struct disk_info *dinfo, int test) { int fd; struct write_list *wr_lst = NULL; int rv; if (validate_and_config(dinfo, &fd, &wr_lst) != 0) { ALOGE("Configuration is invalid."); goto fail; } if ((rv = wlist_commit(fd, wr_lst, test)) >= 0) rv = test ? 0 : sync_ptable(fd); close(fd); wlist_free(wr_lst); return rv; fail: close(fd); if (wr_lst) wlist_free(wr_lst); return 1; } int dump_disk_config(struct disk_info *dinfo) { int cnt; struct part_info *part; printf("Device: %s\n", dinfo->device); printf("Scheme: "); switch (dinfo->scheme) { case PART_SCHEME_MBR: printf("MBR"); break; case PART_SCHEME_GPT: printf("GPT (unsupported)"); break; default: printf("Unknown"); break; } printf ("\n"); printf("Sector size: %d\n", dinfo->sect_size); printf("Skip leading LBAs: %u\n", dinfo->skip_lba); printf("Number of LBAs: %u\n", dinfo->num_lba); printf("Partitions:\n"); for (cnt = 0; cnt < dinfo->num_parts; ++cnt) { part = &dinfo->part_lst[cnt]; printf("\tname = %s\n", part->name); printf("\t\tflags = %s\n", part->flags & PART_ACTIVE_FLAG ? "Active" : "None"); printf("\t\ttype = %s\n", part->type == PC_PART_TYPE_LINUX ? "Linux" : "Unknown"); if (part->len_kb == (uint32_t)-1) printf("\t\tlen = rest of disk\n"); else printf("\t\tlen = %uKB\n", part->len_kb); } printf("Total number of partitions: %d\n", cnt); printf("\n"); return 0; } struct part_info * find_part(struct disk_info *dinfo, const char *name) { struct part_info *pinfo; int cnt; for (cnt = 0; cnt < dinfo->num_parts; ++cnt) { pinfo = &dinfo->part_lst[cnt]; if (!strcmp(pinfo->name, name)) return pinfo; } return NULL; } /* NOTE: If the returned ptr is non-NULL, it must be freed by the caller. */ char * find_part_device(struct disk_info *dinfo, const char *name) { switch (dinfo->scheme) { case PART_SCHEME_MBR: return find_mbr_part(dinfo, name); case PART_SCHEME_GPT: ALOGE("GPT is presently not supported"); break; default: ALOGE("Unknown partition table scheme"); break; } return NULL; }