Add MIPS support to pixelflinger.

See the comment-block at the top of MIPSAssembler.cpp for
implementation overview.

Change-Id: Id492c10610574af8c89c38d19e12fafc3652c28a

1 files changed, 1957 insertions, 0 deletions

diff --git a/libpixelflinger/codeflinger/MIPSAssembler.cpp b/libpixelflinger/codeflinger/MIPSAssembler.cpp
new file mode 100644
index 000000000..7888a0e4e
--- /dev/null
+++ b/libpixelflinger/codeflinger/MIPSAssembler.cpp
@@ -0,0 +1,1957 @@
+/* libs/pixelflinger/codeflinger/MIPSAssembler.cpp
+**
+** Copyright 2012, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License");
+** you may not use this file except in compliance with the License.
+** You may obtain a copy of the License at
+**
+**     http://www.apache.org/licenses/LICENSE-2.0
+**
+** Unless required by applicable law or agreed to in writing, software
+** distributed under the License is distributed on an "AS IS" BASIS,
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+** See the License for the specific language governing permissions and
+** limitations under the License.
+*/
+
+
+/* MIPS assembler and ARM->MIPS assembly translator
+**
+** The approach is to leave the GGLAssembler and associated files largely
+** un-changed, still utilizing all Arm instruction generation. Via the
+** ArmToMipsAssembler (subclassed from ArmAssemblerInterface) each Arm
+** instruction is translated to one or more Mips instructions as necessary. This
+** is clearly less efficient than a direct implementation within the
+** GGLAssembler, but is far cleaner, more maintainable, and has yielded very
+** significant performance gains on Mips compared to the generic pixel pipeline.
+**
+**
+** GGLAssembler changes
+**
+** - The register allocator has been modified to re-map Arm registers 0-15 to mips
+** registers 2-17. Mips register 0 cannot be used as general-purpose register,
+** and register 1 has traditional uses as a short-term temporary.
+**
+** - Added some early bailouts for OUT_OF_REGISTERS in texturing.cpp and
+** GGLAssembler.cpp, since this is not fatal, and can be retried at lower
+** optimization level.
+**
+**
+** ARMAssembler and ARMAssemblerInterface changes
+**
+** Refactored ARM address-mode static functions (imm(), reg_imm(), imm12_pre(), etc.)
+** to virtual, so they can be overridden in MIPSAssembler. The implementation of these
+** functions on ARM is moved from ARMAssemblerInterface.cpp to ARMAssembler.cpp, and
+** is unchanged from the original. (This required duplicating 2 of these as static
+** functions in ARMAssemblerInterface.cpp so they could be used as static initializers).
+*/
+
+
+#define LOG_TAG "MIPSAssembler"
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <cutils/log.h>
+#include <cutils/properties.h>
+
+#if defined(WITH_LIB_HARDWARE)
+#include <hardware_legacy/qemu_tracing.h>
+#endif
+
+#include <private/pixelflinger/ggl_context.h>
+
+#include "codeflinger/MIPSAssembler.h"
+#include "codeflinger/CodeCache.h"
+#include "codeflinger/mips_disassem.h"
+
+// Choose MIPS arch variant following gcc flags
+#if defined(__mips__) && __mips==32 && __mips_isa_rev>=2
+#define mips32r2 1
+#else
+#define mips32r2 0
+#endif
+
+
+#define NOT_IMPLEMENTED()  LOG_ALWAYS_FATAL("Arm instruction %s not yet implemented\n", __func__)
+
+
+
+// ----------------------------------------------------------------------------
+
+namespace android {
+
+// ----------------------------------------------------------------------------
+#if 0
+#pragma mark -
+#pragma mark ArmToMipsAssembler...
+#endif
+
+ArmToMipsAssembler::ArmToMipsAssembler(const sp<Assembly>& assembly,
+                                       char *abuf, int linesz, int instr_count)
+    :   ARMAssemblerInterface(),
+        mArmDisassemblyBuffer(abuf),
+        mArmLineLength(linesz),
+        mArmInstrCount(instr_count),
+        mInum(0),
+        mAssembly(assembly)
+{
+    mMips = new MIPSAssembler(assembly, this);
+    mArmPC = (uint32_t **) malloc(ARM_MAX_INSTUCTIONS * sizeof(uint32_t *));
+    init_conditional_labels();
+}
+
+ArmToMipsAssembler::~ArmToMipsAssembler()
+{
+    delete mMips;
+    free((void *) mArmPC);
+}
+
+uint32_t* ArmToMipsAssembler::pc() const
+{
+    return mMips->pc();
+}
+
+uint32_t* ArmToMipsAssembler::base() const
+{
+    return mMips->base();
+}
+
+void ArmToMipsAssembler::reset()
+{
+    cond.labelnum = 0;
+    mInum = 0;
+    mMips->reset();
+}
+
+int ArmToMipsAssembler::getCodegenArch()
+{
+    return CODEGEN_ARCH_MIPS;
+}
+
+void ArmToMipsAssembler::comment(const char* string)
+{
+    mMips->comment(string);
+}
+
+void ArmToMipsAssembler::label(const char* theLabel)
+{
+    mMips->label(theLabel);
+}
+
+void ArmToMipsAssembler::disassemble(const char* name)
+{
+    mMips->disassemble(name);
+}
+
+void ArmToMipsAssembler::init_conditional_labels()
+{
+    int i;
+    for (i=0;i<99; ++i) {
+        sprintf(cond.label[i], "cond_%d", i);
+    }
+}
+
+
+
+#if 0
+#pragma mark -
+#pragma mark Prolog/Epilog & Generate...
+#endif
+
+void ArmToMipsAssembler::prolog()
+{
+    mArmPC[mInum++] = pc();  // save starting PC for this instr
+
+    mMips->ADDIU(R_sp, R_sp, -(5 * 4));
+    mMips->SW(R_s0, R_sp, 0);
+    mMips->SW(R_s1, R_sp, 4);
+    mMips->SW(R_s2, R_sp, 8);
+    mMips->SW(R_s3, R_sp, 12);
+    mMips->SW(R_s4, R_sp, 16);
+    mMips->MOVE(R_v0, R_a0);    // move context * passed in a0 to v0 (arm r0)
+}
+
+void ArmToMipsAssembler::epilog(uint32_t touched)
+{
+    mArmPC[mInum++] = pc();  // save starting PC for this instr
+
+    mMips->LW(R_s0, R_sp, 0);
+    mMips->LW(R_s1, R_sp, 4);
+    mMips->LW(R_s2, R_sp, 8);
+    mMips->LW(R_s3, R_sp, 12);
+    mMips->LW(R_s4, R_sp, 16);
+    mMips->ADDIU(R_sp, R_sp, (5 * 4));
+    mMips->JR(R_ra);
+
+}
+
+int ArmToMipsAssembler::generate(const char* name)
+{
+    return mMips->generate(name);
+}
+
+uint32_t* ArmToMipsAssembler::pcForLabel(const char* label)
+{
+    return mMips->pcForLabel(label);
+}
+
+
+
+//----------------------------------------------------------
+
+#if 0
+#pragma mark -
+#pragma mark Addressing modes & shifters...
+#endif
+
+
+// do not need this for MIPS, but it is in the Interface (virtual)
+int ArmToMipsAssembler::buildImmediate(
+        uint32_t immediate, uint32_t& rot, uint32_t& imm)
+{
+    // for MIPS, any 32-bit immediate is OK
+    rot = 0;
+    imm = immediate;
+    return 0;
+}
+
+// shifters...
+
+bool ArmToMipsAssembler::isValidImmediate(uint32_t immediate)
+{
+    // for MIPS, any 32-bit immediate is OK
+    return true;
+}
+
+uint32_t ArmToMipsAssembler::imm(uint32_t immediate)
+{
+    // ALOGW("immediate value %08x at pc %08x\n", immediate, (int)pc());
+    amode.value = immediate;
+    return AMODE_IMM;
+}
+
+uint32_t ArmToMipsAssembler::reg_imm(int Rm, int type, uint32_t shift)
+{
+    amode.reg = Rm;
+    amode.stype = type;
+    amode.value = shift;
+    return AMODE_REG_IMM;
+}
+
+uint32_t ArmToMipsAssembler::reg_rrx(int Rm)
+{
+    // reg_rrx mode is not used in the GLLAssember code at this time
+    return AMODE_UNSUPPORTED;
+}
+
+uint32_t ArmToMipsAssembler::reg_reg(int Rm, int type, int Rs)
+{
+    // reg_reg mode is not used in the GLLAssember code at this time
+    return AMODE_UNSUPPORTED;
+}
+
+
+// addressing modes...
+// LDR(B)/STR(B)/PLD (immediate and Rm can be negative, which indicate U=0)
+uint32_t ArmToMipsAssembler::immed12_pre(int32_t immed12, int W)
+{
+    LOG_ALWAYS_FATAL_IF(abs(immed12) >= 0x800,
+                        "LDR(B)/STR(B)/PLD immediate too big (%08x)",
+                        immed12);
+    amode.value = immed12;
+    amode.writeback = W;
+    return AMODE_IMM_12_PRE;
+}
+
+uint32_t ArmToMipsAssembler::immed12_post(int32_t immed12)
+{
+    LOG_ALWAYS_FATAL_IF(abs(immed12) >= 0x800,
+                        "LDR(B)/STR(B)/PLD immediate too big (%08x)",
+                        immed12);
+
+    amode.value = immed12;
+    return AMODE_IMM_12_POST;
+}
+
+uint32_t ArmToMipsAssembler::reg_scale_pre(int Rm, int type,
+        uint32_t shift, int W)
+{
+    LOG_ALWAYS_FATAL_IF(W | type | shift, "reg_scale_pre adv modes not yet implemented");
+
+    amode.reg = Rm;
+    // amode.stype = type;      // more advanced modes not used in GGLAssembler yet
+    // amode.value = shift;
+    // amode.writeback = W;
+    return AMODE_REG_SCALE_PRE;
+}
+
+uint32_t ArmToMipsAssembler::reg_scale_post(int Rm, int type, uint32_t shift)
+{
+    LOG_ALWAYS_FATAL("adr mode reg_scale_post not yet implemented\n");
+    return AMODE_UNSUPPORTED;
+}
+
+// LDRH/LDRSB/LDRSH/STRH (immediate and Rm can be negative, which indicate U=0)
+uint32_t ArmToMipsAssembler::immed8_pre(int32_t immed8, int W)
+{
+    // uint32_t offset = abs(immed8);
+
+    LOG_ALWAYS_FATAL("adr mode immed8_pre not yet implemented\n");
+
+    LOG_ALWAYS_FATAL_IF(abs(immed8) >= 0x100,
+                        "LDRH/LDRSB/LDRSH/STRH immediate too big (%08x)",
+                        immed8);
+    return AMODE_IMM_8_PRE;
+}
+
+uint32_t ArmToMipsAssembler::immed8_post(int32_t immed8)
+{
+    // uint32_t offset = abs(immed8);
+
+    LOG_ALWAYS_FATAL_IF(abs(immed8) >= 0x100,
+                        "LDRH/LDRSB/LDRSH/STRH immediate too big (%08x)",
+                        immed8);
+    amode.value = immed8;
+    return AMODE_IMM_8_POST;
+}
+
+uint32_t ArmToMipsAssembler::reg_pre(int Rm, int W)
+{
+    LOG_ALWAYS_FATAL_IF(W, "reg_pre writeback not yet implemented");
+    amode.reg = Rm;
+    return AMODE_REG_PRE;
+}
+
+uint32_t ArmToMipsAssembler::reg_post(int Rm)
+{
+    LOG_ALWAYS_FATAL("adr mode reg_post not yet implemented\n");
+    return AMODE_UNSUPPORTED;
+}
+
+
+
+// ----------------------------------------------------------------------------
+
+#if 0
+#pragma mark -
+#pragma mark Data Processing...
+#endif
+
+
+static const char * const dpOpNames[] = {
+    "AND", "EOR", "SUB", "RSB", "ADD", "ADC", "SBC", "RSC",
+    "TST", "TEQ", "CMP", "CMN", "ORR", "MOV", "BIC", "MVN"
+};
+
+// check if the operand registers from a previous CMP or S-bit instruction
+// would be overwritten by this instruction. If so, move the value to a
+// safe register.
+// Note that we cannot tell at _this_ instruction time if a future (conditional)
+// instruction will _also_ use this value (a defect of the simple 1-pass, one-
+// instruction-at-a-time translation). Therefore we must be conservative and
+// save the value before it is overwritten. This costs an extra MOVE instr.
+
+void ArmToMipsAssembler::protectConditionalOperands(int Rd)
+{
+    if (Rd == cond.r1) {
+        mMips->MOVE(R_cmp, cond.r1);
+        cond.r1 = R_cmp;
+    }
+    if (cond.type == CMP_COND && Rd == cond.r2) {
+        mMips->MOVE(R_cmp2, cond.r2);
+        cond.r2 = R_cmp2;
+    }
+}
+
+
+// interprets the addressing mode, and generates the common code
+// used by the majority of data-processing ops. Many MIPS instructions
+// have a register-based form and a different immediate form. See
+// opAND below for an example. (this could be inlined)
+//
+// this works with the imm(), reg_imm() methods above, which are directly
+// called by the GLLAssembler.
+// note: _signed parameter defaults to false (un-signed)
+// note: tmpReg parameter defaults to 1, MIPS register AT
+int ArmToMipsAssembler::dataProcAdrModes(int op, int& source, bool _signed, int tmpReg)
+{
+    if (op < AMODE_REG) {
+        source = op;
+        return SRC_REG;
+    } else if (op == AMODE_IMM) {
+        if ((!_signed && amode.value > 0xffff)
+                || (_signed && ((int)amode.value < -32768 || (int)amode.value > 32767) )) {
+            mMips->LUI(tmpReg, (amode.value >> 16));
+            if (amode.value & 0x0000ffff) {
+                mMips->ORI(tmpReg, tmpReg, (amode.value & 0x0000ffff));
+            }
+            source = tmpReg;
+            return SRC_REG;
+        } else {
+            source = amode.value;
+            return SRC_IMM;
+        }
+    } else if (op == AMODE_REG_IMM) {
+        switch (amode.stype) {
+            case LSL: mMips->SLL(tmpReg, amode.reg, amode.value); break;
+            case LSR: mMips->SRL(tmpReg, amode.reg, amode.value); break;
+            case ASR: mMips->SRA(tmpReg, amode.reg, amode.value); break;
+            case ROR: if (mips32r2) {
+                          mMips->ROTR(tmpReg, amode.reg, amode.value);
+                      } else {
+                          mMips->RORIsyn(tmpReg, amode.reg, amode.value);
+                      }
+                      break;
+        }
+        source = tmpReg;
+        return SRC_REG;
+    } else {  // adr mode RRX is not used in GGL Assembler at this time
+        // we are screwed, this should be exception, assert-fail or something
+        LOG_ALWAYS_FATAL("adr mode reg_rrx not yet implemented\n");
+        return SRC_ERROR;
+    }
+}
+
+
+void ArmToMipsAssembler::dataProcessing(int opcode, int cc,
+        int s, int Rd, int Rn, uint32_t Op2)
+{
+    int src;    // src is modified by dataProcAdrModes() - passed as int&
+
+
+    if (cc != AL) {
+        protectConditionalOperands(Rd);
+        // the branch tests register(s) set by prev CMP or instr with 'S' bit set
+        // inverse the condition to jump past this conditional instruction
+        ArmToMipsAssembler::B(cc^1, cond.label[++cond.labelnum]);
+    } else {
+        mArmPC[mInum++] = pc();  // save starting PC for this instr
+    }
+
+    switch (opcode) {
+    case opAND:
+        if (dataProcAdrModes(Op2, src) == SRC_REG) {
+            mMips->AND(Rd, Rn, src);
+        } else {                        // adr mode was SRC_IMM
+            mMips->ANDI(Rd, Rn, src);
+        }
+        break;
+
+    case opADD:
+        // set "signed" to true for adr modes
+        if (dataProcAdrModes(Op2, src, true) == SRC_REG) {
+            mMips->ADDU(Rd, Rn, src);
+        } else {                        // adr mode was SRC_IMM
+            mMips->ADDIU(Rd, Rn, src);
+        }
+        break;
+
+    case opSUB:
+        // set "signed" to true for adr modes
+        if (dataProcAdrModes(Op2, src, true) == SRC_REG) {
+            mMips->SUBU(Rd, Rn, src);
+        } else {                        // adr mode was SRC_IMM
+            mMips->SUBIU(Rd, Rn, src);
+        }
+        break;
+
+    case opEOR:
+        if (dataProcAdrModes(Op2, src) == SRC_REG) {
+            mMips->XOR(Rd, Rn, src);
+        } else {                        // adr mode was SRC_IMM
+            mMips->XORI(Rd, Rn, src);
+        }
+        break;
+
+    case opORR:
+        if (dataProcAdrModes(Op2, src) == SRC_REG) {
+            mMips->OR(Rd, Rn, src);
+        } else {                        // adr mode was SRC_IMM
+            mMips->ORI(Rd, Rn, src);
+        }
+        break;
+
+    case opBIC:
+        if (dataProcAdrModes(Op2, src) == SRC_IMM) {
+            // if we are 16-bit imnmediate, load to AT reg
+            mMips->ORI(R_at, 0, src);
+            src = R_at;
+        }
+        mMips->NOT(R_at, src);
+        mMips->AND(Rd, Rn, R_at);
+        break;
+
+    case opRSB:
+        if (dataProcAdrModes(Op2, src) == SRC_IMM) {
+            // if we are 16-bit imnmediate, load to AT reg
+            mMips->ORI(R_at, 0, src);
+            src = R_at;
+        }
+        mMips->SUBU(Rd, src, Rn);   // subu with the parameters reversed
+        break;
+
+    case opMOV:
+        if (Op2 < AMODE_REG) {  // op2 is reg # in this case
+            mMips->MOVE(Rd, Op2);
+        } else if (Op2 == AMODE_IMM) {
+            if (amode.value > 0xffff) {
+                mMips->LUI(Rd, (amode.value >> 16));
+                if (amode.value & 0x0000ffff) {
+                    mMips->ORI(Rd, Rd, (amode.value & 0x0000ffff));
+                }
+             } else {
+                mMips->ORI(Rd, 0, amode.value);
+            }
+        } else if (Op2 == AMODE_REG_IMM) {
+            switch (amode.stype) {
+            case LSL: mMips->SLL(Rd, amode.reg, amode.value); break;
+            case LSR: mMips->SRL(Rd, amode.reg, amode.value); break;
+            case ASR: mMips->SRA(Rd, amode.reg, amode.value); break;
+            case ROR: if (mips32r2) {
+                          mMips->ROTR(Rd, amode.reg, amode.value);
+                      } else {
+                          mMips->RORIsyn(Rd, amode.reg, amode.value);
+                      }
+                      break;
+            }
+        }
+        else {
+            // adr mode RRX is not used in GGL Assembler at this time
+            mMips->UNIMPL();
+        }
+        break;
+
+    case opMVN:     // this is a 1's complement: NOT
+        if (Op2 < AMODE_REG) {  // op2 is reg # in this case
+            mMips->NOR(Rd, Op2, 0);     // NOT is NOR with 0
+            break;
+        } else if (Op2 == AMODE_IMM) {
+            if (amode.value > 0xffff) {
+                mMips->LUI(Rd, (amode.value >> 16));
+                if (amode.value & 0x0000ffff) {
+                    mMips->ORI(Rd, Rd, (amode.value & 0x0000ffff));
+                }
+             } else {
+                mMips->ORI(Rd, 0, amode.value);
+             }
+        } else if (Op2 == AMODE_REG_IMM) {
+            switch (amode.stype) {
+            case LSL: mMips->SLL(Rd, amode.reg, amode.value); break;
+            case LSR: mMips->SRL(Rd, amode.reg, amode.value); break;
+            case ASR: mMips->SRA(Rd, amode.reg, amode.value); break;
+            case ROR: if (mips32r2) {
+                          mMips->ROTR(Rd, amode.reg, amode.value);
+                      } else {
+                          mMips->RORIsyn(Rd, amode.reg, amode.value);
+                      }
+                      break;
+            }
+        }
+        else {
+            // adr mode RRX is not used in GGL Assembler at this time
+            mMips->UNIMPL();
+        }
+        mMips->NOR(Rd, Rd, 0);     // NOT is NOR with 0
+        break;
+
+    case opCMP:
+        // Either operand of a CMP instr could get overwritten by a subsequent
+        // conditional instruction, which is ok, _UNLESS_ there is a _second_
+        // conditional instruction. Under MIPS, this requires doing the comparison
+        // again (SLT), and the original operands must be available. (and this
+        // pattern of multiple conditional instructions from same CMP _is_ used
+        // in GGL-Assembler)
+        //
+        // For now, if a conditional instr overwrites the operands, we will
+        // move them to dedicated temp regs. This is ugly, and inefficient,
+        // and should be optimized.
+        //
+        // WARNING: making an _Assumption_ that CMP operand regs will NOT be
+        // trashed by intervening NON-conditional instructions. In the general
+        // case this is legal, but it is NOT currently done in GGL-Assembler.
+
+        cond.type = CMP_COND;
+        cond.r1 = Rn;
+        if (dataProcAdrModes(Op2, src, false, R_cmp2) == SRC_REG) {
+            cond.r2 = src;
+        } else {                        // adr mode was SRC_IMM
+            mMips->ORI(R_cmp2, R_zero, src);
+            cond.r2 = R_cmp2;
+        }
+
+        break;
+
+
+    case opTST:
+    case opTEQ:
+    case opCMN:
+    case opADC:
+    case opSBC:
+    case opRSC:
+        mMips->UNIMPL(); // currently unused in GGL Assembler code
+        break;
+    }
+
+    if (cc != AL) {
+        mMips->label(cond.label[cond.labelnum]);
+    }
+    if (s && opcode != opCMP) {
+        cond.type = SBIT_COND;
+        cond.r1 = Rd;
+    }
+}
+
+
+
+#if 0
+#pragma mark -
+#pragma mark Multiply...
+#endif
+
+// multiply, accumulate
+void ArmToMipsAssembler::MLA(int cc, int s,
+        int Rd, int Rm, int Rs, int Rn) {
+
+    mArmPC[mInum++] = pc();  // save starting PC for this instr
+
+    mMips->MUL(R_at, Rm, Rs);
+    mMips->ADDU(Rd, R_at, Rn);
+    if (s) {
+        cond.type = SBIT_COND;
+        cond.r1 = Rd;
+    }
+}
+
+void ArmToMipsAssembler::MUL(int cc, int s,
+        int Rd, int Rm, int Rs) {
+    mArmPC[mInum++] = pc();
+    mMips->MUL(Rd, Rm, Rs);
+    if (s) {
+        cond.type = SBIT_COND;
+        cond.r1 = Rd;
+    }
+}
+
+void ArmToMipsAssembler::UMULL(int cc, int s,
+        int RdLo, int RdHi, int Rm, int Rs) {
+    mArmPC[mInum++] = pc();
+    mMips->MULT(Rm, Rs);
+    mMips->MFHI(RdHi);
+    mMips->MFLO(RdLo);
+    if (s) {
+        cond.type = SBIT_COND;
+        cond.r1 = RdHi;     // BUG...
+        LOG_ALWAYS_FATAL("Condition on UMULL must be on 64-bit result\n");
+    }
+}
+
+void ArmToMipsAssembler::UMUAL(int cc, int s,
+        int RdLo, int RdHi, int Rm, int Rs) {
+    LOG_FATAL_IF(RdLo==Rm || RdHi==Rm || RdLo==RdHi,
+                        "UMUAL(r%u,r%u,r%u,r%u)", RdLo,RdHi,Rm,Rs);
+    // *mPC++ =    (cc<<28) | (1<<23) | (1<<21) | (s<<20) |
+    //             (RdHi<<16) | (RdLo<<12) | (Rs<<8) | 0x90 | Rm;
+    mArmPC[mInum++] = pc();
+    mMips->NOP2();
+    NOT_IMPLEMENTED();
+    if (s) {
+        cond.type = SBIT_COND;
+        cond.r1 = RdHi;     // BUG...
+        LOG_ALWAYS_FATAL("Condition on UMULL must be on 64-bit result\n");
+    }
+}
+
+void ArmToMipsAssembler::SMULL(int cc, int s,
+        int RdLo, int RdHi, int Rm, int Rs) {
+    LOG_FATAL_IF(RdLo==Rm || RdHi==Rm || RdLo==RdHi,
+                        "SMULL(r%u,r%u,r%u,r%u)", RdLo,RdHi,Rm,Rs);
+    // *mPC++ =    (cc<<28) | (1<<23) | (1<<22) | (s<<20) |
+    //             (RdHi<<16) | (RdLo<<12) | (Rs<<8) | 0x90 | Rm;
+    mArmPC[mInum++] = pc();
+    mMips->NOP2();
+    NOT_IMPLEMENTED();
+    if (s) {
+        cond.type = SBIT_COND;
+        cond.r1 = RdHi;     // BUG...
+        LOG_ALWAYS_FATAL("Condition on SMULL must be on 64-bit result\n");
+    }
+}
+void ArmToMipsAssembler::SMUAL(int cc, int s,
+        int RdLo, int RdHi, int Rm, int Rs) {
+    LOG_FATAL_IF(RdLo==Rm || RdHi==Rm || RdLo==RdHi,
+                        "SMUAL(r%u,r%u,r%u,r%u)", RdLo,RdHi,Rm,Rs);
+    // *mPC++ =    (cc<<28) | (1<<23) | (1<<22) | (1<<21) | (s<<20) |
+    //             (RdHi<<16) | (RdLo<<12) | (Rs<<8) | 0x90 | Rm;
+    mArmPC[mInum++] = pc();
+    mMips->NOP2();
+    NOT_IMPLEMENTED();
+    if (s) {
+        cond.type = SBIT_COND;
+        cond.r1 = RdHi;     // BUG...
+        LOG_ALWAYS_FATAL("Condition on SMUAL must be on 64-bit result\n");
+    }
+}
+
+
+
+#if 0
+#pragma mark -
+#pragma mark Branches...
+#endif
+
+// branches...
+
+void ArmToMipsAssembler::B(int cc, const char* label)
+{
+    mArmPC[mInum++] = pc();
+    if (cond.type == SBIT_COND) { cond.r2 = R_zero; }
+
+    switch(cc) {
+        case EQ: mMips->BEQ(cond.r1, cond.r2, label); break;
+        case NE: mMips->BNE(cond.r1, cond.r2, label); break;
+        case HS: mMips->BGEU(cond.r1, cond.r2, label); break;
+        case LO: mMips->BLTU(cond.r1, cond.r2, label); break;
+        case MI: mMips->BLT(cond.r1, cond.r2, label); break;
+        case PL: mMips->BGE(cond.r1, cond.r2, label); break;
+
+        case HI: mMips->BGTU(cond.r1, cond.r2, label); break;
+        case LS: mMips->BLEU(cond.r1, cond.r2, label); break;
+        case GE: mMips->BGE(cond.r1, cond.r2, label); break;
+        case LT: mMips->BLT(cond.r1, cond.r2, label); break;
+        case GT: mMips->BGT(cond.r1, cond.r2, label); break;
+        case LE: mMips->BLE(cond.r1, cond.r2, label); break;
+        case AL: mMips->B(label); break;
+        case NV: /* B Never - no instruction */ break;
+
+        case VS:
+        case VC:
+        default:
+            LOG_ALWAYS_FATAL("Unsupported cc: %02x\n", cc);
+            break;
+    }
+}
+
+void ArmToMipsAssembler::BL(int cc, const char* label)
+{
+    LOG_ALWAYS_FATAL("branch-and-link not supported yet\n");
+    mArmPC[mInum++] = pc();
+}
+
+// no use for Branches with integer PC, but they're in the Interface class ....
+void ArmToMipsAssembler::B(int cc, uint32_t* to_pc)
+{
+    LOG_ALWAYS_FATAL("branch to absolute PC not supported, use Label\n");
+    mArmPC[mInum++] = pc();
+}
+
+void ArmToMipsAssembler::BL(int cc, uint32_t* to_pc)
+{
+    LOG_ALWAYS_FATAL("branch to absolute PC not supported, use Label\n");
+    mArmPC[mInum++] = pc();
+}
+
+void ArmToMipsAssembler::BX(int cc, int Rn)
+{
+    LOG_ALWAYS_FATAL("branch to absolute PC not supported, use Label\n");
+    mArmPC[mInum++] = pc();
+}
+
+
+
+#if 0
+#pragma mark -
+#pragma mark Data Transfer...
+#endif
+
+// data transfer...
+void ArmToMipsAssembler::LDR(int cc, int Rd, int Rn, uint32_t offset)
+{
+    mArmPC[mInum++] = pc();
+    // work-around for ARM default address mode of immed12_pre(0)
+    if (offset > AMODE_UNSUPPORTED) offset = 0;
+    switch (offset) {
+        case 0:
+            amode.value = 0;
+            amode.writeback = 0;
+            // fall thru to next case ....
+        case AMODE_IMM_12_PRE:
+            if (Rn == ARMAssemblerInterface::SP) {
+                Rn = R_sp;      // convert LDR via Arm SP to LW via Mips SP
+            }
+            mMips->LW(Rd, Rn, amode.value);
+            if (amode.writeback) {      // OPTIONAL writeback on pre-index mode
+                mMips->ADDIU(Rn, Rn, amode.value);
+            }
+            break;
+        case AMODE_IMM_12_POST:
+            if (Rn == ARMAssemblerInterface::SP) {
+                Rn = R_sp;      // convert STR thru Arm SP to STR thru Mips SP
+            }
+            mMips->LW(Rd, Rn, 0);
+            mMips->ADDIU(Rn, Rn, amode.value);
+            break;
+        case AMODE_REG_SCALE_PRE:
+            // we only support simple base + index, no advanced modes for this one yet
+            mMips->ADDU(R_at, Rn, amode.reg);
+            mMips->LW(Rd, R_at, 0);
+            break;
+    }
+}
+
+void ArmToMipsAssembler::LDRB(int cc, int Rd, int Rn, uint32_t offset)
+{
+    mArmPC[mInum++] = pc();
+    // work-around for ARM default address mode of immed12_pre(0)
+    if (offset > AMODE_UNSUPPORTED) offset = 0;
+    switch (offset) {
+        case 0:
+            amode.value = 0;
+            amode.writeback = 0;
+            // fall thru to next case ....
+        case AMODE_IMM_12_PRE:
+            mMips->LBU(Rd, Rn, amode.value);
+            if (amode.writeback) {      // OPTIONAL writeback on pre-index mode
+                mMips->ADDIU(Rn, Rn, amode.value);
+            }
+            break;
+        case AMODE_IMM_12_POST:
+            mMips->LBU(Rd, Rn, 0);
+            mMips->ADDIU(Rn, Rn, amode.value);
+            break;
+        case AMODE_REG_SCALE_PRE:
+            // we only support simple base + index, no advanced modes for this one yet
+            mMips->ADDU(R_at, Rn, amode.reg);
+            mMips->LBU(Rd, R_at, 0);
+            break;
+    }
+
+}
+
+void ArmToMipsAssembler::STR(int cc, int Rd, int Rn, uint32_t offset)
+{
+    mArmPC[mInum++] = pc();
+    // work-around for ARM default address mode of immed12_pre(0)
+    if (offset > AMODE_UNSUPPORTED) offset = 0;
+    switch (offset) {
+        case 0:
+            amode.value = 0;
+            amode.writeback = 0;
+            // fall thru to next case ....
+        case AMODE_IMM_12_PRE:
+            if (Rn == ARMAssemblerInterface::SP) {
+                Rn = R_sp;  // convert STR thru Arm SP to SW thru Mips SP
+            }
+            if (amode.writeback) {      // OPTIONAL writeback on pre-index mode
+                // If we will writeback, then update the index reg, then store.
+                // This correctly handles stack-push case.
+                mMips->ADDIU(Rn, Rn, amode.value);
+                mMips->SW(Rd, Rn, 0);
+            } else {
+                // No writeback so store offset by value
+                mMips->SW(Rd, Rn, amode.value);
+            }
+            break;
+        case AMODE_IMM_12_POST:
+            mMips->SW(Rd, Rn, 0);
+            mMips->ADDIU(Rn, Rn, amode.value);  // post index always writes back
+            break;
+        case AMODE_REG_SCALE_PRE:
+            // we only support simple base + index, no advanced modes for this one yet
+            mMips->ADDU(R_at, Rn, amode.reg);
+            mMips->SW(Rd, R_at, 0);
+            break;
+    }
+}
+
+void ArmToMipsAssembler::STRB(int cc, int Rd, int Rn, uint32_t offset)
+{
+    mArmPC[mInum++] = pc();
+    // work-around for ARM default address mode of immed12_pre(0)
+    if (offset > AMODE_UNSUPPORTED) offset = 0;
+    switch (offset) {
+        case 0:
+            amode.value = 0;
+            amode.writeback = 0;
+            // fall thru to next case ....
+        case AMODE_IMM_12_PRE:
+            mMips->SB(Rd, Rn, amode.value);
+            if (amode.writeback) {      // OPTIONAL writeback on pre-index mode
+                mMips->ADDIU(Rn, Rn, amode.value);
+            }
+            break;
+        case AMODE_IMM_12_POST:
+            mMips->SB(Rd, Rn, 0);
+            mMips->ADDIU(Rn, Rn, amode.value);
+            break;
+        case AMODE_REG_SCALE_PRE:
+            // we only support simple base + index, no advanced modes for this one yet
+            mMips->ADDU(R_at, Rn, amode.reg);
+            mMips->SB(Rd, R_at, 0);
+            break;
+    }
+}
+
+void ArmToMipsAssembler::LDRH(int cc, int Rd, int Rn, uint32_t offset)
+{
+    mArmPC[mInum++] = pc();
+    // work-around for ARM default address mode of immed8_pre(0)
+    if (offset > AMODE_UNSUPPORTED) offset = 0;
+    switch (offset) {
+        case 0:
+            amode.value = 0;
+            // fall thru to next case ....
+        case AMODE_IMM_8_PRE:      // no support yet for writeback
+            mMips->LHU(Rd, Rn, amode.value);
+            break;
+        case AMODE_IMM_8_POST:
+            mMips->LHU(Rd, Rn, 0);
+            mMips->ADDIU(Rn, Rn, amode.value);
+            break;
+        case AMODE_REG_PRE:
+            // we only support simple base +/- index
+            if (amode.reg >= 0) {
+                mMips->ADDU(R_at, Rn, amode.reg);
+            } else {
+                mMips->SUBU(R_at, Rn, abs(amode.reg));
+            }
+            mMips->LHU(Rd, R_at, 0);
+            break;
+    }
+}
+
+void ArmToMipsAssembler::LDRSB(int cc, int Rd, int Rn, uint32_t offset)
+{
+    mArmPC[mInum++] = pc();
+    mMips->NOP2();
+    NOT_IMPLEMENTED();
+}
+
+void ArmToMipsAssembler::LDRSH(int cc, int Rd, int Rn, uint32_t offset)
+{
+    mArmPC[mInum++] = pc();
+    mMips->NOP2();
+    NOT_IMPLEMENTED();
+}
+
+void ArmToMipsAssembler::STRH(int cc, int Rd, int Rn, uint32_t offset)
+{
+    mArmPC[mInum++] = pc();
+    // work-around for ARM default address mode of immed8_pre(0)
+    if (offset > AMODE_UNSUPPORTED) offset = 0;
+    switch (offset) {
+        case 0:
+            amode.value = 0;
+            // fall thru to next case ....
+        case AMODE_IMM_8_PRE:      // no support yet for writeback
+            mMips->SH(Rd, Rn, amode.value);
+            break;
+        case AMODE_IMM_8_POST:
+            mMips->SH(Rd, Rn, 0);
+            mMips->ADDIU(Rn, Rn, amode.value);
+            break;
+        case AMODE_REG_PRE:
+            // we only support simple base +/- index
+            if (amode.reg >= 0) {
+                mMips->ADDU(R_at, Rn, amode.reg);
+            } else {
+                mMips->SUBU(R_at, Rn, abs(amode.reg));
+            }
+            mMips->SH(Rd, R_at, 0);
+            break;
+    }
+}
+
+
+
+#if 0
+#pragma mark -
+#pragma mark Block Data Transfer...
+#endif
+
+// block data transfer...
+void ArmToMipsAssembler::LDM(int cc, int dir,
+        int Rn, int W, uint32_t reg_list)
+{   //                        ED FD EA FA      IB IA DB DA
+    // const uint8_t P[8] = { 1, 0, 1, 0,      1, 0, 1, 0 };
+    // const uint8_t U[8] = { 1, 1, 0, 0,      1, 1, 0, 0 };
+    // *mPC++ = (cc<<28) | (4<<25) | (uint32_t(P[dir])<<24) |
+    //         (uint32_t(U[dir])<<23) | (1<<20) | (W<<21) | (Rn<<16) | reg_list;
+    mArmPC[mInum++] = pc();
+    mMips->NOP2();
+    NOT_IMPLEMENTED();
+}
+
+void ArmToMipsAssembler::STM(int cc, int dir,
+        int Rn, int W, uint32_t reg_list)
+{   //                        FA EA FD ED      IB IA DB DA
+    // const uint8_t P[8] = { 0, 1, 0, 1,      1, 0, 1, 0 };
+    // const uint8_t U[8] = { 0, 0, 1, 1,      1, 1, 0, 0 };
+    // *mPC++ = (cc<<28) | (4<<25) | (uint32_t(P[dir])<<24) |
+    //         (uint32_t(U[dir])<<23) | (0<<20) | (W<<21) | (Rn<<16) | reg_list;
+    mArmPC[mInum++] = pc();
+    mMips->NOP2();
+    NOT_IMPLEMENTED();
+}
+
+
+
+#if 0
+#pragma mark -
+#pragma mark Special...
+#endif
+
+// special...
+void ArmToMipsAssembler::SWP(int cc, int Rn, int Rd, int Rm) {
+    // *mPC++ = (cc<<28) | (2<<23) | (Rn<<16) | (Rd << 12) | 0x90 | Rm;
+    mArmPC[mInum++] = pc();
+    mMips->NOP2();
+    NOT_IMPLEMENTED();
+}
+
+void ArmToMipsAssembler::SWPB(int cc, int Rn, int Rd, int Rm) {
+    // *mPC++ = (cc<<28) | (2<<23) | (1<<22) | (Rn<<16) | (Rd << 12) | 0x90 | Rm;
+    mArmPC[mInum++] = pc();
+    mMips->NOP2();
+    NOT_IMPLEMENTED();
+}
+
+void ArmToMipsAssembler::SWI(int cc, uint32_t comment) {
+    // *mPC++ = (cc<<28) | (0xF<<24) | comment;
+    mArmPC[mInum++] = pc();
+    mMips->NOP2();
+    NOT_IMPLEMENTED();
+}
+
+
+#if 0
+#pragma mark -
+#pragma mark DSP instructions...
+#endif
+
+// DSP instructions...
+void ArmToMipsAssembler::PLD(int Rn, uint32_t offset) {
+    LOG_ALWAYS_FATAL_IF(!((offset&(1<<24)) && !(offset&(1<<21))),
+                        "PLD only P=1, W=0");
+    // *mPC++ = 0xF550F000 | (Rn<<16) | offset;
+    mArmPC[mInum++] = pc();
+    mMips->NOP2();
+    NOT_IMPLEMENTED();
+}
+
+void ArmToMipsAssembler::CLZ(int cc, int Rd, int Rm)
+{
+    mArmPC[mInum++] = pc();
+    mMips->CLZ(Rd, Rm);
+}
+
+void ArmToMipsAssembler::QADD(int cc,  int Rd, int Rm, int Rn)
+{
+    // *mPC++ = (cc<<28) | 0x1000050 | (Rn<<16) | (Rd<<12) | Rm;
+    mArmPC[mInum++] = pc();
+    mMips->NOP2();
+    NOT_IMPLEMENTED();
+}
+
+void ArmToMipsAssembler::QDADD(int cc,  int Rd, int Rm, int Rn)
+{
+    // *mPC++ = (cc<<28) | 0x1400050 | (Rn<<16) | (Rd<<12) | Rm;
+    mArmPC[mInum++] = pc();
+    mMips->NOP2();
+    NOT_IMPLEMENTED();
+}
+
+void ArmToMipsAssembler::QSUB(int cc,  int Rd, int Rm, int Rn)
+{
+    // *mPC++ = (cc<<28) | 0x1200050 | (Rn<<16) | (Rd<<12) | Rm;
+    mArmPC[mInum++] = pc();
+    mMips->NOP2();
+    NOT_IMPLEMENTED();
+}
+
+void ArmToMipsAssembler::QDSUB(int cc,  int Rd, int Rm, int Rn)
+{
+    // *mPC++ = (cc<<28) | 0x1600050 | (Rn<<16) | (Rd<<12) | Rm;
+    mArmPC[mInum++] = pc();
+    mMips->NOP2();
+    NOT_IMPLEMENTED();
+}
+
+// 16 x 16 signed multiply (like SMLAxx without the accumulate)
+void ArmToMipsAssembler::SMUL(int cc, int xy,
+                int Rd, int Rm, int Rs)
+{
+    mArmPC[mInum++] = pc();
+
+    // the 16 bits may be in the top or bottom half of 32-bit source reg,
+    // as defined by the codes BB, BT, TB, TT (compressed param xy)
+    // where x corresponds to Rm and y to Rs
+
+    // select half-reg for Rm
+    if (xy & xyTB) {
+        // use top 16-bits
+        mMips->SRA(R_at, Rm, 16);
+    } else {
+        // use bottom 16, but sign-extend to 32
+        if (mips32r2) {
+            mMips->SEH(R_at, Rm);
+        } else {
+            mMips->SLL(R_at, Rm, 16);
+            mMips->SRA(R_at, R_at, 16);
+        }
+    }
+    // select half-reg for Rs
+    if (xy & xyBT) {
+        // use top 16-bits
+        mMips->SRA(R_at2, Rs, 16);
+    } else {
+        // use bottom 16, but sign-extend to 32
+        if (mips32r2) {
+            mMips->SEH(R_at2, Rs);
+        } else {
+            mMips->SLL(R_at2, Rs, 16);
+            mMips->SRA(R_at2, R_at2, 16);
+        }
+    }
+    mMips->MUL(Rd, R_at, R_at2);
+}
+
+// signed 32b x 16b multiple, save top 32-bits of 48-bit result
+void ArmToMipsAssembler::SMULW(int cc, int y,
+                int Rd, int Rm, int Rs)
+{
+    mArmPC[mInum++] = pc();
+
+    // the selector yT or yB refers to reg Rs
+    if (y & yT) {
+        // zero the bottom 16-bits, with 2 shifts, it can affect result
+        mMips->SRL(R_at, Rs, 16);
+        mMips->SLL(R_at, R_at, 16);
+
+    } else {
+        // move low 16-bit half, to high half
+        mMips->SLL(R_at, Rs, 16);
+    }
+    mMips->MULT(Rm, R_at);
+    mMips->MFHI(Rd);
+}
+
+// 16 x 16 signed multiply, accumulate: Rd = Rm{16} * Rs{16} + Rn
+void ArmToMipsAssembler::SMLA(int cc, int xy,
+                int Rd, int Rm, int Rs, int Rn)
+{
+    mArmPC[mInum++] = pc();
+
+    // the 16 bits may be in the top or bottom half of 32-bit source reg,
+    // as defined by the codes BB, BT, TB, TT (compressed param xy)
+    // where x corresponds to Rm and y to Rs
+
+    // select half-reg for Rm
+    if (xy & xyTB) {
+        // use top 16-bits
+        mMips->SRA(R_at, Rm, 16);
+    } else {
+        // use bottom 16, but sign-extend to 32
+        if (mips32r2) {
+            mMips->SEH(R_at, Rm);
+        } else {
+            mMips->SLL(R_at, Rm, 16);
+            mMips->SRA(R_at, R_at, 16);
+        }
+    }
+    // select half-reg for Rs
+    if (xy & xyBT) {
+        // use top 16-bits
+        mMips->SRA(R_at2, Rs, 16);
+    } else {
+        // use bottom 16, but sign-extend to 32
+        if (mips32r2) {
+            mMips->SEH(R_at2, Rs);
+        } else {
+            mMips->SLL(R_at2, Rs, 16);
+            mMips->SRA(R_at2, R_at2, 16);
+        }
+    }
+
+    mMips->MUL(R_at, R_at, R_at2);
+    mMips->ADDU(Rd, R_at, Rn);
+}
+
+void ArmToMipsAssembler::SMLAL(int cc, int xy,
+                int RdHi, int RdLo, int Rs, int Rm)
+{
+    // *mPC++ = (cc<<28) | 0x1400080 | (RdHi<<16) | (RdLo<<12) | (Rs<<8) | (xy<<4) | Rm;
+    mArmPC[mInum++] = pc();
+    mMips->NOP2();
+    NOT_IMPLEMENTED();
+}
+
+void ArmToMipsAssembler::SMLAW(int cc, int y,
+                int Rd, int Rm, int Rs, int Rn)
+{
+    // *mPC++ = (cc<<28) | 0x1200080 | (Rd<<16) | (Rn<<12) | (Rs<<8) | (y<<4) | Rm;
+    mArmPC[mInum++] = pc();
+    mMips->NOP2();
+    NOT_IMPLEMENTED();
+}
+
+// used by ARMv6 version of GGLAssembler::filter32
+void ArmToMipsAssembler::UXTB16(int cc, int Rd, int Rm, int rotate)
+{
+    mArmPC[mInum++] = pc();
+
+    //Rd[31:16] := ZeroExtend((Rm ROR (8 * sh))[23:16]),
+    //Rd[15:0] := ZeroExtend((Rm ROR (8 * sh))[7:0]). sh 0-3.
+
+    mMips->ROTR(Rm, Rm, rotate * 8);
+    mMips->AND(Rd, Rm, 0x00FF00FF);
+}
+
+void ArmToMipsAssembler::UBFX(int cc, int Rd, int Rn, int lsb, int width)
+{
+     /* Placeholder for UBFX */
+     mArmPC[mInum++] = pc();
+
+     mMips->NOP2();
+     NOT_IMPLEMENTED();
+}
+
+
+
+
+
+#if 0
+#pragma mark -
+#pragma mark MIPS Assembler...
+#endif
+
+
+//**************************************************************************
+//**************************************************************************
+//**************************************************************************
+
+
+/* mips assembler
+** this is a subset of mips32r2, targeted specifically at ARM instruction
+** replacement in the pixelflinger/codeflinger code.
+**
+** To that end, there is no need for floating point, or priviledged
+** instructions. This all runs in user space, no float.
+**
+** The syntax makes no attempt to be as complete as the assember, with
+** synthetic instructions, and automatic recognition of immedate operands
+** (use the immediate form of the instruction), etc.
+**
+** We start with mips32r1, and may add r2 and dsp extensions if cpu
+** supports. Decision will be made at compile time, based on gcc
+** options. (makes sense since android will be built for a a specific
+** device)
+*/
+
+MIPSAssembler::MIPSAssembler(const sp<Assembly>& assembly, ArmToMipsAssembler *parent)
+    : mParent(parent),
+    mAssembly(assembly)
+{
+    mBase = mPC = (uint32_t *)assembly->base();
+    mDuration = ggl_system_time();
+}
+
+MIPSAssembler::~MIPSAssembler()
+{
+}
+
+
+uint32_t* MIPSAssembler::pc() const
+{
+    return mPC;
+}
+
+uint32_t* MIPSAssembler::base() const
+{
+    return mBase;
+}
+
+void MIPSAssembler::reset()
+{
+    mBase = mPC = (uint32_t *)mAssembly->base();
+    mBranchTargets.clear();
+    mLabels.clear();
+    mLabelsInverseMapping.clear();
+    mComments.clear();
+}
+
+
+// convert tabs to spaces, and remove any newline
+// works with strings of limited size (makes a temp copy)
+#define TABSTOP 8
+void MIPSAssembler::string_detab(char *s)
+{
+    char *os = s;
+    char temp[100];
+    char *t = temp;
+    int len = 99;
+    int i = TABSTOP;
+
+    while (*s && len-- > 0) {
+        if (*s == '\n') { s++; continue; }
+        if (*s == '\t') {
+            s++;
+            for ( ; i>0; i--) {*t++ = ' '; len--; }
+        } else {
+            *t++ = *s++;
+        }
+        if (i <= 0) i = TABSTOP;
+        i--;
+    }
+    *t = '\0';
+    strcpy(os, temp);
+}
+
+void MIPSAssembler::string_pad(char *s, int padded_len)
+{
+    int len = strlen(s);
+    s += len;
+    for (int i = padded_len - len; i > 0; --i) {
+        *s++ = ' ';
+    }
+    *s = '\0';
+}
+
+// ----------------------------------------------------------------------------
+
+void MIPSAssembler::disassemble(const char* name)
+{
+    char di_buf[140];
+
+    if (name) {
+        ALOGW("%s:\n", name);
+    }
+
+    bool arm_disasm_fmt = (mParent->mArmDisassemblyBuffer == NULL) ? false : true;
+
+    typedef char dstr[40];
+    dstr *lines = (dstr *)mParent->mArmDisassemblyBuffer;
+
+    if (mParent->mArmDisassemblyBuffer != NULL) {
+        for (int i=0; i<mParent->mArmInstrCount; ++i) {
+            string_detab(lines[i]);
+        }
+    }
+
+    // iArm is an index to Arm instructions 1...n for this assembly sequence
+    // mArmPC[iArm] holds the value of the Mips-PC for the first MIPS
+    // instruction corresponding to that Arm instruction number
+
+    int iArm = 0;
+    size_t count = pc()-base();
+    uint32_t* mipsPC = base();
+    while (count--) {
+        ssize_t label = mLabelsInverseMapping.indexOfKey(mipsPC);
+        if (label >= 0) {
+            ALOGW("%s:\n", mLabelsInverseMapping.valueAt(label));
+        }
+        ssize_t comment = mComments.indexOfKey(mipsPC);
+        if (comment >= 0) {
+            ALOGW("; %s\n", mComments.valueAt(comment));
+        }
+        // ALOGW("%08x:    %08x    ", int(i), int(i[0]));
+        ::mips_disassem(mipsPC, di_buf, arm_disasm_fmt);
+        string_detab(di_buf);
+        string_pad(di_buf, 30);
+        ALOGW("%08x:    %08x    %s", uint32_t(mipsPC), uint32_t(*mipsPC), di_buf);
+        mipsPC++;
+    }
+}
+
+void MIPSAssembler::comment(const char* string)
+{
+    mComments.add(pc(), string);
+}
+
+void MIPSAssembler::label(const char* theLabel)
+{
+    mLabels.add(theLabel, pc());
+    mLabelsInverseMapping.add(pc(), theLabel);
+}
+
+
+void MIPSAssembler::prolog()
+{
+    // empty - done in ArmToMipsAssembler
+}
+
+void MIPSAssembler::epilog(uint32_t touched)
+{
+    // empty - done in ArmToMipsAssembler
+}
+
+int MIPSAssembler::generate(const char* name)
+{
+    // fixup all the branches
+    size_t count = mBranchTargets.size();
+    while (count--) {
+        const branch_target_t& bt = mBranchTargets[count];
+        uint32_t* target_pc = mLabels.valueFor(bt.label);
+        LOG_ALWAYS_FATAL_IF(!target_pc,
+                "error resolving branch targets, target_pc is null");
+        int32_t offset = int32_t(target_pc - (bt.pc+1));
+        *bt.pc |= offset & 0x00FFFF;
+    }
+
+    mAssembly->resize( int(pc()-base())*4 );
+
+    // the instruction & data caches are flushed by CodeCache
+    const int64_t duration = ggl_system_time() - mDuration;
+    const char * const format = "generated %s (%d ins) at [%p:%p] in %lld ns\n";
+    ALOGI(format, name, int(pc()-base()), base(), pc(), duration);
+
+#if defined(WITH_LIB_HARDWARE)
+    if (__builtin_expect(mQemuTracing, 0)) {
+        int err = qemu_add_mapping(int(base()), name);
+        mQemuTracing = (err >= 0);
+    }
+#endif
+
+    char value[PROPERTY_VALUE_MAX];
+    value[0] = '\0';
+
+    property_get("debug.pf.disasm", value, "0");
+
+    if (atoi(value) != 0) {
+        disassemble(name);
+    }
+
+    return NO_ERROR;
+}
+
+uint32_t* MIPSAssembler::pcForLabel(const char* label)
+{
+    return mLabels.valueFor(label);
+}
+
+
+
+#if 0
+#pragma mark -
+#pragma mark Arithmetic...
+#endif
+
+void MIPSAssembler::ADDU(int Rd, int Rs, int Rt)
+{
+    *mPC++ = (spec_op<<OP_SHF) | (addu_fn<<FUNC_SHF)
+                    | (Rs<<RS_SHF) | (Rt<<RT_SHF) | (Rd<<RD_SHF);
+}
+
+// MD00086 pdf says this is: ADDIU rt, rs, imm -- they do not use Rd
+void MIPSAssembler::ADDIU(int Rt, int Rs, int16_t imm)
+{
+    *mPC++ = (addiu_op<<OP_SHF) | (Rt<<RT_SHF) | (Rs<<RS_SHF) | (imm & MSK_16);
+}
+
+
+void MIPSAssembler::SUBU(int Rd, int Rs, int Rt)
+{
+    *mPC++ = (spec_op<<OP_SHF) | (subu_fn<<FUNC_SHF) |
+                        (Rs<<RS_SHF) | (Rt<<RT_SHF) | (Rd<<RD_SHF) ;
+}
+
+
+void MIPSAssembler::SUBIU(int Rt, int Rs, int16_t imm)   // really addiu(d, s, -j)
+{
+    *mPC++ = (addiu_op<<OP_SHF) | (Rt<<RT_SHF) | (Rs<<RS_SHF) | ((-imm) & MSK_16);
+}
+
+
+void MIPSAssembler::NEGU(int Rd, int Rs)    // really subu(d, zero, s)
+{
+    MIPSAssembler::SUBU(Rd, 0, Rs);
+}
+
+void MIPSAssembler::MUL(int Rd, int Rs, int Rt)
+{
+    *mPC++ = (spec2_op<<OP_SHF) | (mul_fn<<FUNC_SHF) |
+                        (Rs<<RS_SHF) | (Rt<<RT_SHF) | (Rd<<RD_SHF) ;
+}
+
+void MIPSAssembler::MULT(int Rs, int Rt)    // dest is hi,lo
+{
+    *mPC++ = (spec_op<<OP_SHF) | (mult_fn<<FUNC_SHF) | (Rt<<RT_SHF) | (Rs<<RS_SHF);
+}
+
+void MIPSAssembler::MULTU(int Rs, int Rt)    // dest is hi,lo
+{
+    *mPC++ = (spec_op<<OP_SHF) | (multu_fn<<FUNC_SHF) | (Rt<<RT_SHF) | (Rs<<RS_SHF);
+}
+
+void MIPSAssembler::MADD(int Rs, int Rt)    // hi,lo = hi,lo + Rs * Rt
+{
+    *mPC++ = (spec2_op<<OP_SHF) | (madd_fn<<FUNC_SHF) | (Rt<<RT_SHF) | (Rs<<RS_SHF);
+}
+
+void MIPSAssembler::MADDU(int Rs, int Rt)    // hi,lo = hi,lo + Rs * Rt
+{
+    *mPC++ = (spec2_op<<OP_SHF) | (maddu_fn<<FUNC_SHF) | (Rt<<RT_SHF) | (Rs<<RS_SHF);
+}
+
+
+void MIPSAssembler::MSUB(int Rs, int Rt)    // hi,lo = hi,lo - Rs * Rt
+{
+    *mPC++ = (spec2_op<<OP_SHF) | (msub_fn<<FUNC_SHF) | (Rt<<RT_SHF) | (Rs<<RS_SHF);
+}
+
+void MIPSAssembler::MSUBU(int Rs, int Rt)    // hi,lo = hi,lo - Rs * Rt
+{
+    *mPC++ = (spec2_op<<OP_SHF) | (msubu_fn<<FUNC_SHF) | (Rt<<RT_SHF) | (Rs<<RS_SHF);
+}
+
+
+void MIPSAssembler::SEB(int Rd, int Rt)    // sign-extend byte (mips32r2)
+{
+    *mPC++ = (spec3_op<<OP_SHF) | (bshfl_fn<<FUNC_SHF) | (seb_fn << SA_SHF) |
+                    (Rt<<RT_SHF) | (Rd<<RD_SHF);
+}
+
+void MIPSAssembler::SEH(int Rd, int Rt)    // sign-extend half-word (mips32r2)
+{
+    *mPC++ = (spec3_op<<OP_SHF) | (bshfl_fn<<FUNC_SHF) | (seh_fn << SA_SHF) |
+                    (Rt<<RT_SHF) | (Rd<<RD_SHF);
+}
+
+
+
+#if 0
+#pragma mark -
+#pragma mark Comparisons...
+#endif
+
+void MIPSAssembler::SLT(int Rd, int Rs, int Rt)
+{
+    *mPC++ = (spec_op<<OP_SHF) | (slt_fn<<FUNC_SHF) |
+                        (Rd<<RD_SHF) | (Rs<<RS_SHF) | (Rt<<RT_SHF);
+}
+
+void MIPSAssembler::SLTI(int Rt, int Rs, int16_t imm)
+{
+    *mPC++ = (slti_op<<OP_SHF) | (Rt<<RT_SHF) | (Rs<<RS_SHF) | (imm & MSK_16);
+}
+
+
+void MIPSAssembler::SLTU(int Rd, int Rs, int Rt)
+{
+    *mPC++ = (spec_op<<OP_SHF) | (sltu_fn<<FUNC_SHF) |
+                        (Rd<<RD_SHF) | (Rs<<RS_SHF) | (Rt<<RT_SHF);
+}
+
+void MIPSAssembler::SLTIU(int Rt, int Rs, int16_t imm)
+{
+    *mPC++ = (sltiu_op<<OP_SHF) | (Rt<<RT_SHF) | (Rs<<RS_SHF) | (imm & MSK_16);
+}
+
+
+
+#if 0
+#pragma mark -
+#pragma mark Logical...
+#endif
+
+void MIPSAssembler::AND(int Rd, int Rs, int Rt)
+{
+    *mPC++ = (spec_op<<OP_SHF) | (and_fn<<FUNC_SHF) |
+                        (Rd<<RD_SHF) | (Rs<<RS_SHF) | (Rt<<RT_SHF);
+}
+
+void MIPSAssembler::ANDI(int Rt, int Rs, uint16_t imm)      // todo: support larger immediate
+{
+    *mPC++ = (andi_op<<OP_SHF) | (Rt<<RT_SHF) | (Rs<<RS_SHF) | (imm & MSK_16);
+}
+
+
+void MIPSAssembler::OR(int Rd, int Rs, int Rt)
+{
+    *mPC++ = (spec_op<<OP_SHF) | (or_fn<<FUNC_SHF) |
+                        (Rd<<RD_SHF) | (Rs<<RS_SHF) | (Rt<<RT_SHF);
+}
+
+void MIPSAssembler::ORI(int Rt, int Rs, uint16_t imm)
+{
+    *mPC++ = (ori_op<<OP_SHF) | (Rt<<RT_SHF) | (Rs<<RS_SHF) | (imm & MSK_16);
+}
+
+void MIPSAssembler::NOR(int Rd, int Rs, int Rt)
+{
+    *mPC++ = (spec_op<<OP_SHF) | (nor_fn<<FUNC_SHF) |
+                        (Rd<<RD_SHF) | (Rs<<RS_SHF) | (Rt<<RT_SHF);
+}
+
+void MIPSAssembler::NOT(int Rd, int Rs)
+{
+    MIPSAssembler::NOR(Rd, Rs, 0);  // NOT(d,s) = NOR(d,s,zero)
+}
+
+void MIPSAssembler::XOR(int Rd, int Rs, int Rt)
+{
+    *mPC++ = (spec_op<<OP_SHF) | (xor_fn<<FUNC_SHF) |
+                        (Rd<<RD_SHF) | (Rs<<RS_SHF) | (Rt<<RT_SHF);
+}
+
+void MIPSAssembler::XORI(int Rt, int Rs, uint16_t imm)  // todo: support larger immediate
+{
+    *mPC++ = (xori_op<<OP_SHF) | (Rt<<RT_SHF) | (Rs<<RS_SHF) | (imm & MSK_16);
+}
+
+void MIPSAssembler::SLL(int Rd, int Rt, int shft)
+{
+    *mPC++ = (spec_op<<OP_SHF) | (sll_fn<<FUNC_SHF) |
+                        (Rd<<RD_SHF) | (Rt<<RT_SHF) | (shft<<RE_SHF);
+}
+
+void MIPSAssembler::SLLV(int Rd, int Rt, int Rs)
+{
+    *mPC++ = (spec_op<<OP_SHF) | (sllv_fn<<FUNC_SHF) |
+                        (Rd<<RD_SHF) | (Rs<<RS_SHF) | (Rt<<RT_SHF);
+}
+
+void MIPSAssembler::SRL(int Rd, int Rt, int shft)
+{
+    *mPC++ = (spec_op<<OP_SHF) | (srl_fn<<FUNC_SHF) |
+                        (Rd<<RD_SHF) | (Rt<<RT_SHF) | (shft<<RE_SHF);
+}
+
+void MIPSAssembler::SRLV(int Rd, int Rt, int Rs)
+{
+    *mPC++ = (spec_op<<OP_SHF) | (srlv_fn<<FUNC_SHF) |
+                        (Rd<<RD_SHF) | (Rs<<RS_SHF) | (Rt<<RT_SHF);
+}
+
+void MIPSAssembler::SRA(int Rd, int Rt, int shft)
+{
+    *mPC++ = (spec_op<<OP_SHF) | (sra_fn<<FUNC_SHF) |
+                        (Rd<<RD_SHF) | (Rt<<RT_SHF) | (shft<<RE_SHF);
+}
+
+void MIPSAssembler::SRAV(int Rd, int Rt, int Rs)
+{
+    *mPC++ = (spec_op<<OP_SHF) | (srav_fn<<FUNC_SHF) |
+                        (Rd<<RD_SHF) | (Rs<<RS_SHF) | (Rt<<RT_SHF);
+}
+
+void MIPSAssembler::ROTR(int Rd, int Rt, int shft)      // mips32r2
+{
+    // note weird encoding (SRL + 1)
+    *mPC++ = (spec_op<<OP_SHF) | (srl_fn<<FUNC_SHF) |
+                        (1<<RS_SHF) | (Rd<<RD_SHF) | (Rt<<RT_SHF) | (shft<<RE_SHF);
+}
+
+void MIPSAssembler::ROTRV(int Rd, int Rt, int Rs)       // mips32r2
+{
+    // note weird encoding (SRLV + 1)
+    *mPC++ = (spec_op<<OP_SHF) | (srlv_fn<<FUNC_SHF) |
+                        (Rd<<RD_SHF) | (Rs<<RS_SHF) | (Rt<<RT_SHF) | (1<<RE_SHF);
+}
+
+// uses at2 register (mapped to some appropriate mips reg)
+void MIPSAssembler::RORsyn(int Rd, int Rt, int Rs)
+{
+    // synthetic: d = t rotated by s
+    MIPSAssembler::NEGU(R_at2, Rs);
+    MIPSAssembler::SLLV(R_at2, Rt, R_at2);
+    MIPSAssembler::SRLV(Rd, Rt, Rs);
+    MIPSAssembler::OR(Rd, Rd, R_at2);
+}
+
+// immediate version - uses at2 register (mapped to some appropriate mips reg)
+void MIPSAssembler::RORIsyn(int Rd, int Rt, int rot)
+{
+    // synthetic: d = t rotated by immed rot
+    // d = s >> rot | s << (32-rot)
+    MIPSAssembler::SLL(R_at2, Rt, 32-rot);
+    MIPSAssembler::SRL(Rd, Rt, rot);
+    MIPSAssembler::OR(Rd, Rd, R_at2);
+}
+
+void MIPSAssembler::CLO(int Rd, int Rs)
+{
+    // Rt field must have same gpr # as Rd
+    *mPC++ = (spec2_op<<OP_SHF) | (clo_fn<<FUNC_SHF) |
+                        (Rd<<RD_SHF) | (Rs<<RS_SHF) | (Rd<<RT_SHF);
+}
+
+void MIPSAssembler::CLZ(int Rd, int Rs)
+{
+    // Rt field must have same gpr # as Rd
+    *mPC++ = (spec2_op<<OP_SHF) | (clz_fn<<FUNC_SHF) |
+                        (Rd<<RD_SHF) | (Rs<<RS_SHF) | (Rd<<RT_SHF);
+}
+
+void MIPSAssembler::WSBH(int Rd, int Rt)      // mips32r2
+{
+    *mPC++ = (spec3_op<<OP_SHF) | (bshfl_fn<<FUNC_SHF) | (wsbh_fn << SA_SHF) |
+                        (Rt<<RT_SHF) | (Rd<<RD_SHF);
+}
+
+
+
+#if 0
+#pragma mark -
+#pragma mark Load/store...
+#endif
+
+void MIPSAssembler::LW(int Rt, int Rbase, int16_t offset)
+{
+    *mPC++ = (lw_op<<OP_SHF) | (Rbase<<RS_SHF) | (Rt<<RT_SHF) | (offset & MSK_16);
+}
+
+void MIPSAssembler::SW(int Rt, int Rbase, int16_t offset)
+{
+    *mPC++ = (sw_op<<OP_SHF) | (Rbase<<RS_SHF) | (Rt<<RT_SHF) | (offset & MSK_16);
+}
+
+// lb is sign-extended
+void MIPSAssembler::LB(int Rt, int Rbase, int16_t offset)
+{
+    *mPC++ = (lb_op<<OP_SHF) | (Rbase<<RS_SHF) | (Rt<<RT_SHF) | (offset & MSK_16);
+}
+
+void MIPSAssembler::LBU(int Rt, int Rbase, int16_t offset)
+{
+    *mPC++ = (lbu_op<<OP_SHF) | (Rbase<<RS_SHF) | (Rt<<RT_SHF) | (offset & MSK_16);
+}
+
+void MIPSAssembler::SB(int Rt, int Rbase, int16_t offset)
+{
+    *mPC++ = (sb_op<<OP_SHF) | (Rbase<<RS_SHF) | (Rt<<RT_SHF) | (offset & MSK_16);
+}
+
+// lh is sign-extended
+void MIPSAssembler::LH(int Rt, int Rbase, int16_t offset)
+{
+    *mPC++ = (lh_op<<OP_SHF) | (Rbase<<RS_SHF) | (Rt<<RT_SHF) | (offset & MSK_16);
+}
+
+void MIPSAssembler::LHU(int Rt, int Rbase, int16_t offset)
+{
+    *mPC++ = (lhu_op<<OP_SHF) | (Rbase<<RS_SHF) | (Rt<<RT_SHF) | (offset & MSK_16);
+}
+
+void MIPSAssembler::SH(int Rt, int Rbase, int16_t offset)
+{
+    *mPC++ = (sh_op<<OP_SHF) | (Rbase<<RS_SHF) | (Rt<<RT_SHF) | (offset & MSK_16);
+}
+
+void MIPSAssembler::LUI(int Rt, int16_t offset)
+{
+    *mPC++ = (lui_op<<OP_SHF) | (Rt<<RT_SHF) | (offset & MSK_16);
+}
+
+
+
+#if 0
+#pragma mark -
+#pragma mark Register move...
+#endif
+
+void MIPSAssembler::MOVE(int Rd, int Rs)
+{
+    // encoded as "or rd, rs, zero"
+    *mPC++ = (spec_op<<OP_SHF) | (or_fn<<FUNC_SHF) |
+                        (Rd<<RD_SHF) | (Rs<<RS_SHF) | (0<<RT_SHF);
+}
+
+void MIPSAssembler::MOVN(int Rd, int Rs, int Rt)
+{
+    *mPC++ = (spec_op<<OP_SHF) | (movn_fn<<FUNC_SHF) |
+                        (Rd<<RD_SHF) | (Rs<<RS_SHF) | (Rt<<RT_SHF);
+}
+
+void MIPSAssembler::MOVZ(int Rd, int Rs, int Rt)
+{
+    *mPC++ = (spec_op<<OP_SHF) | (movz_fn<<FUNC_SHF) |
+                        (Rd<<RD_SHF) | (Rs<<RS_SHF) | (Rt<<RT_SHF);
+}
+
+void MIPSAssembler::MFHI(int Rd)
+{
+    *mPC++ = (spec_op<<OP_SHF) | (mfhi_fn<<FUNC_SHF) | (Rd<<RD_SHF);
+}
+
+void MIPSAssembler::MFLO(int Rd)
+{
+    *mPC++ = (spec_op<<OP_SHF) | (mflo_fn<<FUNC_SHF) | (Rd<<RD_SHF);
+}
+
+void MIPSAssembler::MTHI(int Rs)
+{
+    *mPC++ = (spec_op<<OP_SHF) | (mthi_fn<<FUNC_SHF) | (Rs<<RS_SHF);
+}
+
+void MIPSAssembler::MTLO(int Rs)
+{
+    *mPC++ = (spec_op<<OP_SHF) | (mtlo_fn<<FUNC_SHF) | (Rs<<RS_SHF);
+}
+
+
+
+#if 0
+#pragma mark -
+#pragma mark Branch...
+#endif
+
+// temporarily forcing a NOP into branch-delay slot, just to be safe
+// todo: remove NOP, optimze use of delay slots
+void MIPSAssembler::B(const char* label)
+{
+    mBranchTargets.add(branch_target_t(label, mPC));
+
+    // encoded as BEQ zero, zero, offset
+    *mPC++ = (beq_op<<OP_SHF) | (0<<RT_SHF)
+                        | (0<<RS_SHF) | 0;  // offset filled in later
+
+    MIPSAssembler::NOP();
+}
+
+void MIPSAssembler::BEQ(int Rs, int Rt, const char* label)
+{
+    mBranchTargets.add(branch_target_t(label, mPC));
+    *mPC++ = (beq_op<<OP_SHF) | (Rt<<RT_SHF) | (Rs<<RS_SHF) | 0;
+    MIPSAssembler::NOP();
+}
+
+void MIPSAssembler::BNE(int Rs, int Rt, const char* label)
+{
+    mBranchTargets.add(branch_target_t(label, mPC));
+    *mPC++ = (bne_op<<OP_SHF) | (Rt<<RT_SHF) | (Rs<<RS_SHF) | 0;
+    MIPSAssembler::NOP();
+}
+
+void MIPSAssembler::BLEZ(int Rs, const char* label)
+{
+    mBranchTargets.add(branch_target_t(label, mPC));
+    *mPC++ = (blez_op<<OP_SHF) | (0<<RT_SHF) | (Rs<<RS_SHF) | 0;
+    MIPSAssembler::NOP();
+}
+
+void MIPSAssembler::BLTZ(int Rs, const char* label)
+{
+    mBranchTargets.add(branch_target_t(label, mPC));
+    *mPC++ = (regimm_op<<OP_SHF) | (bltz_fn<<RT_SHF) | (Rs<<RS_SHF) | 0;
+    MIPSAssembler::NOP();
+}
+
+void MIPSAssembler::BGTZ(int Rs, const char* label)
+{
+    mBranchTargets.add(branch_target_t(label, mPC));
+    *mPC++ = (bgtz_op<<OP_SHF) | (0<<RT_SHF) | (Rs<<RS_SHF) | 0;
+    MIPSAssembler::NOP();
+}
+
+
+void MIPSAssembler::BGEZ(int Rs, const char* label)
+{
+    mBranchTargets.add(branch_target_t(label, mPC));
+    *mPC++ = (regimm_op<<OP_SHF) | (bgez_fn<<RT_SHF) | (Rs<<RS_SHF) | 0;
+    MIPSAssembler::NOP();
+}
+
+void MIPSAssembler::JR(int Rs)
+{
+    *mPC++ = (spec_op<<OP_SHF) | (Rs<<RS_SHF) | (jr_fn << FUNC_SHF);
+    MIPSAssembler::NOP();
+}
+
+
+#if 0
+#pragma mark -
+#pragma mark Synthesized Branch...
+#endif
+
+// synthetic variants of branches (using slt & friends)
+void MIPSAssembler::BEQZ(int Rs, const char* label)
+{
+    BEQ(Rs, R_zero, label);
+}
+
+void MIPSAssembler::BNEZ(int Rs, const char* label)
+{
+    BNE(R_at, R_zero, label);
+}
+
+void MIPSAssembler::BGE(int Rs, int Rt, const char* label)
+{
+    SLT(R_at, Rs, Rt);
+    BEQ(R_at, R_zero, label);
+}
+
+void MIPSAssembler::BGEU(int Rs, int Rt, const char* label)
+{
+    SLTU(R_at, Rs, Rt);
+    BEQ(R_at, R_zero, label);
+}
+
+void MIPSAssembler::BGT(int Rs, int Rt, const char* label)
+{
+    SLT(R_at, Rt, Rs);   // rev
+    BNE(R_at, R_zero, label);
+}
+
+void MIPSAssembler::BGTU(int Rs, int Rt, const char* label)
+{
+    SLTU(R_at, Rt, Rs);   // rev
+    BNE(R_at, R_zero, label);
+}
+
+void MIPSAssembler::BLE(int Rs, int Rt, const char* label)
+{
+    SLT(R_at, Rt, Rs);   // rev
+    BEQ(R_at, R_zero, label);
+}
+
+void MIPSAssembler::BLEU(int Rs, int Rt, const char* label)
+{
+    SLTU(R_at, Rt, Rs);  // rev
+    BEQ(R_at, R_zero, label);
+}
+
+void MIPSAssembler::BLT(int Rs, int Rt, const char* label)
+{
+    SLT(R_at, Rs, Rt);
+    BNE(R_at, R_zero, label);
+}
+
+void MIPSAssembler::BLTU(int Rs, int Rt, const char* label)
+{
+    SLTU(R_at, Rs, Rt);
+    BNE(R_at, R_zero, label);
+}
+
+
+
+
+#if 0
+#pragma mark -
+#pragma mark Misc...
+#endif
+
+void MIPSAssembler::NOP(void)
+{
+    // encoded as "sll zero, zero, 0", which is all zero
+    *mPC++ = (spec_op<<OP_SHF) | (sll_fn<<FUNC_SHF);
+}
+
+// using this as special opcode for not-yet-implemented ARM instruction
+void MIPSAssembler::NOP2(void)
+{
+    // encoded as "sll zero, zero, 2", still a nop, but a unique code
+    *mPC++ = (spec_op<<OP_SHF) | (sll_fn<<FUNC_SHF) | (2 << RE_SHF);
+}
+
+// using this as special opcode for purposefully NOT implemented ARM instruction
+void MIPSAssembler::UNIMPL(void)
+{
+    // encoded as "sll zero, zero, 3", still a nop, but a unique code
+    *mPC++ = (spec_op<<OP_SHF) | (sll_fn<<FUNC_SHF) | (3 << RE_SHF);
+}
+
+
+}; // namespace android:
+
+