From 13a6233b033f8816a3643f1f47d44e4cfd6c5384 Mon Sep 17 00:00:00 2001 From: Brett Creeley Date: Wed, 22 Jan 2020 07:21:29 -0800 Subject: ice: Add support to enable/disable all Rx queues before waiting Currently when we enable/disable all Rx queues we do the following sequence for each Rx queue and then move to the next queue. 1. Enable/Disable the Rx queue via register write. 2. Read the configuration register to determine if the Rx queue was enabled/disabled successfully. In some cases enabling/disabling queue 0 fails because of step 2 above. Fix this by doing step 1 for all of the Rx queues and then step 2 for all of the Rx queues. Also, there are cases where we enable/disable a single queue (i.e. SR-IOV and XDP) so add a new function that does step 1 and 2 above with a read flush in between. This change also required a single Rx queue to be enabled/disabled with and without waiting for the change to propagate through hardware. Fix this by adding a boolean wait flag to the necessary functions. Also, add the keywords "one" and "all" to distinguish between enabling/disabling a single Rx queue and all Rx queues respectively. Signed-off-by: Brett Creeley Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ice/ice_base.c | 42 +++++++++++++++++++++++-------- 1 file changed, 31 insertions(+), 11 deletions(-) (limited to 'drivers/net/ethernet/intel/ice/ice_base.c') diff --git a/drivers/net/ethernet/intel/ice/ice_base.c b/drivers/net/ethernet/intel/ice/ice_base.c index 81885efadc7a..1c41e7e6d548 100644 --- a/drivers/net/ethernet/intel/ice/ice_base.c +++ b/drivers/net/ethernet/intel/ice/ice_base.c @@ -459,17 +459,20 @@ int __ice_vsi_get_qs(struct ice_qs_cfg *qs_cfg) } /** - * ice_vsi_ctrl_rx_ring - Start or stop a VSI's Rx ring + * ice_vsi_ctrl_one_rx_ring - start/stop VSI's Rx ring with no busy wait * @vsi: the VSI being configured - * @ena: start or stop the Rx rings - * @rxq_idx: Rx queue index + * @ena: start or stop the Rx ring + * @rxq_idx: 0-based Rx queue index for the VSI passed in + * @wait: wait or don't wait for configuration to finish in hardware + * + * Return 0 on success and negative on error. */ -int ice_vsi_ctrl_rx_ring(struct ice_vsi *vsi, bool ena, u16 rxq_idx) +int +ice_vsi_ctrl_one_rx_ring(struct ice_vsi *vsi, bool ena, u16 rxq_idx, bool wait) { int pf_q = vsi->rxq_map[rxq_idx]; struct ice_pf *pf = vsi->back; struct ice_hw *hw = &pf->hw; - int ret = 0; u32 rx_reg; rx_reg = rd32(hw, QRX_CTRL(pf_q)); @@ -485,13 +488,30 @@ int ice_vsi_ctrl_rx_ring(struct ice_vsi *vsi, bool ena, u16 rxq_idx) rx_reg &= ~QRX_CTRL_QENA_REQ_M; wr32(hw, QRX_CTRL(pf_q), rx_reg); - /* wait for the change to finish */ - ret = ice_pf_rxq_wait(pf, pf_q, ena); - if (ret) - dev_err(ice_pf_to_dev(pf), "VSI idx %d Rx ring %d %sable timeout\n", - vsi->idx, pf_q, (ena ? "en" : "dis")); + if (!wait) + return 0; + + ice_flush(hw); + return ice_pf_rxq_wait(pf, pf_q, ena); +} - return ret; +/** + * ice_vsi_wait_one_rx_ring - wait for a VSI's Rx ring to be stopped/started + * @vsi: the VSI being configured + * @ena: true/false to verify Rx ring has been enabled/disabled respectively + * @rxq_idx: 0-based Rx queue index for the VSI passed in + * + * This routine will wait for the given Rx queue of the VSI to reach the + * enabled or disabled state. Returns -ETIMEDOUT in case of failing to reach + * the requested state after multiple retries; else will return 0 in case of + * success. + */ +int ice_vsi_wait_one_rx_ring(struct ice_vsi *vsi, bool ena, u16 rxq_idx) +{ + int pf_q = vsi->rxq_map[rxq_idx]; + struct ice_pf *pf = vsi->back; + + return ice_pf_rxq_wait(pf, pf_q, ena); } /** -- cgit v1.2.3