From c47137a99c597330b69057158b26061a360c0e09 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 6 Feb 2008 02:57:51 +0100 Subject: ide: add ide_read_[alt]status() inline helpers Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-tape.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers/ide/ide-tape.c') diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index bf40d8c824ad..66801c084dd8 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -1178,7 +1178,7 @@ static ide_startstop_t idetape_pc_intr (ide_drive_t *drive) #endif /* IDETAPE_DEBUG_LOG */ /* Clear the interrupt */ - stat = hwif->INB(IDE_STATUS_REG); + stat = ide_read_status(drive); if (test_bit(PC_DMA_IN_PROGRESS, &pc->flags)) { if (hwif->ide_dma_end(drive) || (stat & ERR_STAT)) { @@ -1598,7 +1598,8 @@ static ide_startstop_t idetape_media_access_finished (ide_drive_t *drive) idetape_pc_t *pc = tape->pc; u8 stat; - stat = drive->hwif->INB(IDE_STATUS_REG); + stat = ide_read_status(drive); + if (stat & SEEK_STAT) { if (stat & ERR_STAT) { /* Error detected */ @@ -1758,7 +1759,7 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive, * If the tape is still busy, postpone our request and service * the other device meanwhile. */ - stat = drive->hwif->INB(IDE_STATUS_REG); + stat = ide_read_status(drive); if (!drive->dsc_overlap && !(rq->cmd[0] & REQ_IDETAPE_PC2)) set_bit(IDETAPE_IGNORE_DSC, &tape->flags); -- cgit v1.2.3 From 64a57fe4393bae920d03c253173f59d8a7ec8e25 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 6 Feb 2008 02:57:51 +0100 Subject: ide: add ide_read_error() inline helper Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-tape.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/ide/ide-tape.c') diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 66801c084dd8..401731302c5c 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -1125,7 +1125,7 @@ static ide_startstop_t idetape_retry_pc (ide_drive_t *drive) idetape_pc_t *pc; struct request *rq; - (void)drive->hwif->INB(IDE_ERROR_REG); + (void)ide_read_error(drive); pc = idetape_next_pc_storage(drive); rq = idetape_next_rq_storage(drive); idetape_create_request_sense_cmd(pc); -- cgit v1.2.3 From 8004a8c9744842a5a32b71d3a8093c652972bb23 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Wed, 6 Feb 2008 02:57:51 +0100 Subject: ide-tape: refactor the debug logging facility Teach the debug logging macro to differentiate between log levels based on the type of debug level enabled specifically instead of a threshold-based one. Thus, convert tape->debug_level to a bitmask that is written to over /proc. Also, - cleanup and simplify the debug macro thus removing a lot of code lines, - get rid of unused debug levels, - adjust the loglevel at several places where it was simply missing (e.g. idetape_chrdev_open()) - move the tape ptr initialization up in idetape_chrdev_open() so that we can use it in the debug_log macro earlier in the function. Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-tape.c | 344 ++++++++++++++++++------------------------------- 1 file changed, 122 insertions(+), 222 deletions(-) (limited to 'drivers/ide/ide-tape.c') diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 401731302c5c..64d46fef2602 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -45,6 +45,32 @@ #include #include +enum { + /* output errors only */ + DBG_ERR = (1 << 0), + /* output all sense key/asc */ + DBG_SENSE = (1 << 1), + /* info regarding all chrdev-related procedures */ + DBG_CHRDEV = (1 << 2), + /* all remaining procedures */ + DBG_PROCS = (1 << 3), + /* buffer alloc info (pc_stack & rq_stack) */ + DBG_PCRQ_STACK = (1 << 4), +}; + +/* define to see debug info */ +#define IDETAPE_DEBUG_LOG 0 + +#if IDETAPE_DEBUG_LOG +#define debug_log(lvl, fmt, args...) \ +{ \ + if (tape->debug_mask & lvl) \ + printk(KERN_INFO "ide-tape: " fmt, ## args); \ +} +#else +#define debug_log(lvl, fmt, args...) do {} while (0) +#endif + /**************************** Tunable parameters *****************************/ @@ -67,23 +93,6 @@ #define IDETAPE_MAX_PIPELINE_STAGES 400 #define IDETAPE_INCREASE_STAGES_RATE 20 -/* - * The following are used to debug the driver: - * - * Setting IDETAPE_DEBUG_LOG to 1 will log driver flow control. - * - * Setting them to 0 will restore normal operation mode: - * - * 1. Disable logging normal successful operations. - * 2. Disable self-sanity checks. - * 3. Errors will still be logged, of course. - * - * All the #if DEBUG code will be removed some day, when the driver - * is verified to be stable enough. This will make it much more - * esthetic. - */ -#define IDETAPE_DEBUG_LOG 0 - /* * After each failed packet command we issue a request sense command * and retry the packet command IDETAPE_MAX_PC_RETRIES times. @@ -451,18 +460,7 @@ typedef struct ide_tape_obj { unsigned long uncontrolled_previous_head_time; int restart_speed_control_req; - /* - * Debug_level determines amount of debugging output; - * can be changed using /proc/ide/hdx/settings - * 0 : almost no debugging output - * 1 : 0+output errors only - * 2 : 1+output all sensekey/asc - * 3 : 2+follow all chrdev related procedures - * 4 : 3+follow all procedures - * 5 : 4+include pc_stack rq_stack info - * 6 : 5+USE_COUNT updates - */ - int debug_level; + u32 debug_mask; } idetape_tape_t; static DEFINE_MUTEX(idetape_ref_mutex); @@ -716,11 +714,8 @@ static idetape_pc_t *idetape_next_pc_storage (ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; -#if IDETAPE_DEBUG_LOG - if (tape->debug_level >= 5) - printk(KERN_INFO "ide-tape: pc_stack_index=%d\n", - tape->pc_stack_index); -#endif /* IDETAPE_DEBUG_LOG */ + debug_log(DBG_PCRQ_STACK, "pc_stack_index=%d\n", tape->pc_stack_index); + if (tape->pc_stack_index == IDETAPE_PC_STACK) tape->pc_stack_index=0; return (&tape->pc_stack[tape->pc_stack_index++]); @@ -743,11 +738,8 @@ static struct request *idetape_next_rq_storage (ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; -#if IDETAPE_DEBUG_LOG - if (tape->debug_level >= 5) - printk(KERN_INFO "ide-tape: rq_stack_index=%d\n", - tape->rq_stack_index); -#endif /* IDETAPE_DEBUG_LOG */ + debug_log(DBG_PCRQ_STACK, "rq_stack_index=%d\n", tape->rq_stack_index); + if (tape->rq_stack_index == IDETAPE_PC_STACK) tape->rq_stack_index=0; return (&tape->rq_stack[tape->rq_stack_index++]); @@ -780,17 +772,9 @@ static void idetape_analyze_error(ide_drive_t *drive, u8 *sense) tape->sense_key = sense[2] & 0xF; tape->asc = sense[12]; tape->ascq = sense[13]; -#if IDETAPE_DEBUG_LOG - /* - * Without debugging, we only log an error if we decided to give up - * retrying. - */ - if (tape->debug_level >= 1) - printk(KERN_INFO "ide-tape: pc = %x, sense key = %x, " - "asc = %x, ascq = %x\n", - pc->c[0], tape->sense_key, - tape->asc, tape->ascq); -#endif /* IDETAPE_DEBUG_LOG */ + + debug_log(DBG_ERR, "pc = %x, sense key = %x, asc = %x, ascq = %x\n", + pc->c[0], tape->sense_key, tape->asc, tape->ascq); /* Correct pc->actually_transferred by asking the tape. */ if (test_bit(PC_DMA_ERROR, &pc->flags)) { @@ -843,12 +827,11 @@ static void idetape_activate_next_stage(ide_drive_t *drive) idetape_stage_t *stage = tape->next_stage; struct request *rq = &stage->rq; -#if IDETAPE_DEBUG_LOG - if (tape->debug_level >= 4) - printk(KERN_INFO "ide-tape: Reached idetape_active_next_stage\n"); -#endif /* IDETAPE_DEBUG_LOG */ + debug_log(DBG_PROCS, "Enter %s\n", __func__); + if (stage == NULL) { - printk(KERN_ERR "ide-tape: bug: Trying to activate a non existing stage\n"); + printk(KERN_ERR "ide-tape: bug: Trying to activate a non" + " existing stage\n"); return; } @@ -871,11 +854,8 @@ static void idetape_increase_max_pipeline_stages (ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; int increase = (tape->max_pipeline - tape->min_pipeline) / 10; - -#if IDETAPE_DEBUG_LOG - if (tape->debug_level >= 4) - printk (KERN_INFO "ide-tape: Reached idetape_increase_max_pipeline_stages\n"); -#endif /* IDETAPE_DEBUG_LOG */ + + debug_log(DBG_PROCS, "Enter %s\n", __func__); tape->max_stages += max(increase, 1); tape->max_stages = max(tape->max_stages, tape->min_pipeline); @@ -920,17 +900,16 @@ static void idetape_remove_stage_head (ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; idetape_stage_t *stage; - -#if IDETAPE_DEBUG_LOG - if (tape->debug_level >= 4) - printk(KERN_INFO "ide-tape: Reached idetape_remove_stage_head\n"); -#endif /* IDETAPE_DEBUG_LOG */ + + debug_log(DBG_PROCS, "Enter %s\n", __func__); + if (tape->first_stage == NULL) { printk(KERN_ERR "ide-tape: bug: tape->first_stage is NULL\n"); return; } if (tape->active_stage == tape->first_stage) { - printk(KERN_ERR "ide-tape: bug: Trying to free our active pipeline stage\n"); + printk(KERN_ERR "ide-tape: bug: Trying to free our active " + "pipeline stage\n"); return; } stage = tape->first_stage; @@ -957,10 +936,8 @@ static void idetape_abort_pipeline(ide_drive_t *drive, idetape_stage_t *stage = new_last_stage->next; idetape_stage_t *nstage; -#if IDETAPE_DEBUG_LOG - if (tape->debug_level >= 4) - printk(KERN_INFO "ide-tape: %s: idetape_abort_pipeline called\n", tape->name); -#endif + debug_log(DBG_PROCS, "%s: Enter %s\n", tape->name, __func__); + while (stage) { nstage = stage->next; idetape_kfree_stage(tape, stage); @@ -987,10 +964,7 @@ static int idetape_end_request(ide_drive_t *drive, int uptodate, int nr_sects) int remove_stage = 0; idetape_stage_t *active_stage; -#if IDETAPE_DEBUG_LOG - if (tape->debug_level >= 4) - printk(KERN_INFO "ide-tape: Reached idetape_end_request\n"); -#endif /* IDETAPE_DEBUG_LOG */ + debug_log(DBG_PROCS, "Enter %s\n", __func__); switch (uptodate) { case 0: error = IDETAPE_ERROR_GENERAL; break; @@ -1055,10 +1029,8 @@ static ide_startstop_t idetape_request_sense_callback (ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; -#if IDETAPE_DEBUG_LOG - if (tape->debug_level >= 4) - printk(KERN_INFO "ide-tape: Reached idetape_request_sense_callback\n"); -#endif /* IDETAPE_DEBUG_LOG */ + debug_log(DBG_PROCS, "Enter %s\n", __func__); + if (!tape->pc->error) { idetape_analyze_error(drive, tape->pc->buffer); idetape_end_request(drive, 1, 0); @@ -1143,10 +1115,8 @@ static void idetape_postpone_request (ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; -#if IDETAPE_DEBUG_LOG - if (tape->debug_level >= 4) - printk(KERN_INFO "ide-tape: idetape_postpone_request\n"); -#endif + debug_log(DBG_PROCS, "Enter %s\n", __func__); + tape->postponed_rq = HWGROUP(drive)->rq; ide_stall_queue(drive, tape->dsc_polling_frequency); } @@ -1171,11 +1141,7 @@ static ide_startstop_t idetape_pc_intr (ide_drive_t *drive) u16 bcount; u8 stat, ireason; -#if IDETAPE_DEBUG_LOG - if (tape->debug_level >= 4) - printk(KERN_INFO "ide-tape: Reached idetape_pc_intr " - "interrupt handler\n"); -#endif /* IDETAPE_DEBUG_LOG */ + debug_log(DBG_PROCS, "Enter %s - interrupt handler\n", __func__); /* Clear the interrupt */ stat = ide_read_status(drive); @@ -1208,20 +1174,16 @@ static ide_startstop_t idetape_pc_intr (ide_drive_t *drive) pc->actually_transferred = pc->request_transfer; idetape_update_buffers(pc); } -#if IDETAPE_DEBUG_LOG - if (tape->debug_level >= 4) - printk(KERN_INFO "ide-tape: DMA finished\n"); -#endif /* IDETAPE_DEBUG_LOG */ + debug_log(DBG_PROCS, "DMA finished\n"); + } /* No more interrupts */ if ((stat & DRQ_STAT) == 0) { -#if IDETAPE_DEBUG_LOG - if (tape->debug_level >= 2) - printk(KERN_INFO "ide-tape: Packet command completed, %d bytes transferred\n", pc->actually_transferred); -#endif /* IDETAPE_DEBUG_LOG */ - clear_bit(PC_DMA_IN_PROGRESS, &pc->flags); + debug_log(DBG_SENSE, "Packet command completed, %d bytes" + " transferred\n", pc->actually_transferred); + clear_bit(PC_DMA_IN_PROGRESS, &pc->flags); local_irq_enable(); #if SIMULATE_ERRORS @@ -1236,19 +1198,15 @@ static ide_startstop_t idetape_pc_intr (ide_drive_t *drive) stat &= ~ERR_STAT; if ((stat & ERR_STAT) || test_bit(PC_DMA_ERROR, &pc->flags)) { /* Error detected */ -#if IDETAPE_DEBUG_LOG - if (tape->debug_level >= 1) - printk(KERN_INFO "ide-tape: %s: I/O error\n", - tape->name); -#endif /* IDETAPE_DEBUG_LOG */ + debug_log(DBG_ERR, "%s: I/O error\n", tape->name); + if (pc->c[0] == REQUEST_SENSE) { printk(KERN_ERR "ide-tape: I/O error in request sense command\n"); return ide_do_reset(drive); } -#if IDETAPE_DEBUG_LOG - if (tape->debug_level >= 1) - printk(KERN_INFO "ide-tape: [cmd %x]: check condition\n", pc->c[0]); -#endif + debug_log(DBG_ERR, "[cmd %x]: check condition\n", + pc->c[0]); + /* Retry operation */ return idetape_retry_pc(drive); } @@ -1303,10 +1261,9 @@ static ide_startstop_t idetape_pc_intr (ide_drive_t *drive) ide_set_handler(drive, &idetape_pc_intr, IDETAPE_WAIT_CMD, NULL); return ide_started; } -#if IDETAPE_DEBUG_LOG - if (tape->debug_level >= 2) - printk(KERN_NOTICE "ide-tape: The tape wants to send us more data than expected - allowing transfer\n"); -#endif /* IDETAPE_DEBUG_LOG */ + debug_log(DBG_SENSE, "The tape wants to send us more " + "data than expected - allowing transfer\n"); + } } if (test_bit(PC_WRITING, &pc->flags)) { @@ -1327,11 +1284,10 @@ static ide_startstop_t idetape_pc_intr (ide_drive_t *drive) /* Update the current position */ pc->actually_transferred += bcount; pc->current_position += bcount; -#if IDETAPE_DEBUG_LOG - if (tape->debug_level >= 2) - printk(KERN_INFO "ide-tape: [cmd %x] transferred %d bytes " - "on that interrupt\n", pc->c[0], bcount); -#endif + + debug_log(DBG_SENSE, "[cmd %x] transferred %d bytes on that intr.\n", + pc->c[0], bcount); + /* And set the interrupt handler again */ ide_set_handler(drive, &idetape_pc_intr, IDETAPE_WAIT_CMD, NULL); return ide_started; @@ -1464,10 +1420,7 @@ static ide_startstop_t idetape_issue_packet_command (ide_drive_t *drive, idetape tape->failed_pc = NULL; return pc->callback(drive); } -#if IDETAPE_DEBUG_LOG - if (tape->debug_level >= 2) - printk(KERN_INFO "ide-tape: Retry number - %d, cmd = %02X\n", pc->retries, pc->c[0]); -#endif /* IDETAPE_DEBUG_LOG */ + debug_log(DBG_SENSE, "Retry #%d, cmd = %02X\n", pc->retries, pc->c[0]); pc->retries++; /* We haven't transferred any data yet */ @@ -1505,11 +1458,8 @@ static ide_startstop_t idetape_issue_packet_command (ide_drive_t *drive, idetape static ide_startstop_t idetape_pc_callback (ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; - -#if IDETAPE_DEBUG_LOG - if (tape->debug_level >= 4) - printk(KERN_INFO "ide-tape: Reached idetape_pc_callback\n"); -#endif /* IDETAPE_DEBUG_LOG */ + + debug_log(DBG_PROCS, "Enter %s\n", __func__); idetape_end_request(drive, tape->pc->error ? 0 : 1, 0); return ide_stopped; @@ -1641,11 +1591,7 @@ static ide_startstop_t idetape_rw_callback (ide_drive_t *drive) tape->avg_size = 0; tape->avg_time = jiffies; } - -#if IDETAPE_DEBUG_LOG - if (tape->debug_level >= 4) - printk(KERN_INFO "ide-tape: Reached idetape_rw_callback\n"); -#endif /* IDETAPE_DEBUG_LOG */ + debug_log(DBG_PROCS, "Enter %s\n", __func__); tape->first_frame_position += blocks; rq->current_nr_sectors -= blocks; @@ -1721,12 +1667,9 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive, struct request *postponed_rq = tape->postponed_rq; u8 stat; -#if IDETAPE_DEBUG_LOG - if (tape->debug_level >= 2) - printk(KERN_INFO "ide-tape: sector: %ld, " - "nr_sectors: %ld, current_nr_sectors: %d\n", + debug_log(DBG_SENSE, "sector: %ld, nr_sectors: %ld," + " current_nr_sectors: %d\n", rq->sector, rq->nr_sectors, rq->current_nr_sectors); -#endif /* IDETAPE_DEBUG_LOG */ if (!blk_special_request(rq)) { /* @@ -1917,10 +1860,7 @@ static idetape_stage_t *idetape_kmalloc_stage (idetape_tape_t *tape) { idetape_stage_t *cache_stage = tape->cache_stage; -#if IDETAPE_DEBUG_LOG - if (tape->debug_level >= 4) - printk(KERN_INFO "ide-tape: Reached idetape_kmalloc_stage\n"); -#endif /* IDETAPE_DEBUG_LOG */ + debug_log(DBG_PROCS, "Enter %s\n", __func__); if (tape->nr_stages >= tape->max_stages) return NULL; @@ -2019,11 +1959,9 @@ static void idetape_add_stage_tail (ide_drive_t *drive,idetape_stage_t *stage) { idetape_tape_t *tape = drive->driver_data; unsigned long flags; - -#if IDETAPE_DEBUG_LOG - if (tape->debug_level >= 4) - printk (KERN_INFO "ide-tape: Reached idetape_add_stage_tail\n"); -#endif /* IDETAPE_DEBUG_LOG */ + + debug_log(DBG_PROCS, "Enter %s\n", __func__); + spin_lock_irqsave(&tape->spinlock, flags); stage->next = NULL; if (tape->last_stage != NULL) @@ -2066,29 +2004,22 @@ static ide_startstop_t idetape_read_position_callback (ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; idetape_read_position_result_t *result; - -#if IDETAPE_DEBUG_LOG - if (tape->debug_level >= 4) - printk(KERN_INFO "ide-tape: Reached idetape_read_position_callback\n"); -#endif /* IDETAPE_DEBUG_LOG */ + + debug_log(DBG_PROCS, "Enter %s\n", __func__); if (!tape->pc->error) { result = (idetape_read_position_result_t *) tape->pc->buffer; -#if IDETAPE_DEBUG_LOG - if (tape->debug_level >= 2) - printk(KERN_INFO "ide-tape: BOP - %s\n",result->bop ? "Yes":"No"); - if (tape->debug_level >= 2) - printk(KERN_INFO "ide-tape: EOP - %s\n",result->eop ? "Yes":"No"); -#endif /* IDETAPE_DEBUG_LOG */ + debug_log(DBG_SENSE, "BOP - %s\n", result->bop ? "Yes" : "No"); + debug_log(DBG_SENSE, "EOP - %s\n", result->eop ? "Yes" : "No"); + if (result->bpu) { printk(KERN_INFO "ide-tape: Block location is unknown to the tape\n"); clear_bit(IDETAPE_ADDRESS_VALID, &tape->flags); idetape_end_request(drive, 0, 0); } else { -#if IDETAPE_DEBUG_LOG - if (tape->debug_level >= 2) - printk(KERN_INFO "ide-tape: Block Location - %u\n", ntohl(result->first_block)); -#endif /* IDETAPE_DEBUG_LOG */ + debug_log(DBG_SENSE, "Block Location - %u\n", + ntohl(result->first_block)); + tape->partition = result->partition; tape->first_frame_position = ntohl(result->first_block); tape->last_frame_position = ntohl(result->last_block); @@ -2228,10 +2159,7 @@ static int idetape_read_position (ide_drive_t *drive) idetape_pc_t pc; int position; -#if IDETAPE_DEBUG_LOG - if (tape->debug_level >= 4) - printk(KERN_INFO "ide-tape: Reached idetape_read_position\n"); -#endif /* IDETAPE_DEBUG_LOG */ + debug_log(DBG_PROCS, "Enter %s\n", __func__); idetape_create_read_position_cmd(&pc); if (idetape_queue_pc_tail(drive, &pc)) @@ -2365,12 +2293,11 @@ static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int blocks, struct idetape_tape_t *tape = drive->driver_data; struct request rq; -#if IDETAPE_DEBUG_LOG - if (tape->debug_level >= 2) - printk(KERN_INFO "ide-tape: idetape_queue_rw_tail: cmd=%d\n",cmd); -#endif /* IDETAPE_DEBUG_LOG */ + debug_log(DBG_SENSE, "%s: cmd=%d\n", __func__, cmd); + if (idetape_pipeline_active(tape)) { - printk(KERN_ERR "ide-tape: bug: the pipeline is active in idetape_queue_rw_tail\n"); + printk(KERN_ERR "ide-tape: bug: the pipeline is active in %s\n", + __func__); return (0); } @@ -2474,10 +2401,7 @@ static int idetape_add_chrdev_write_request (ide_drive_t *drive, int blocks) unsigned long flags; struct request *rq; -#if IDETAPE_DEBUG_LOG - if (tape->debug_level >= 3) - printk(KERN_INFO "ide-tape: Reached idetape_add_chrdev_write_request\n"); -#endif /* IDETAPE_DEBUG_LOG */ + debug_log(DBG_CHRDEV, "Enter %s\n", __func__); /* * Attempt to allocate a new stage. @@ -2715,10 +2639,7 @@ static int idetape_add_chrdev_read_request (ide_drive_t *drive,int blocks) struct request *rq_ptr; int bytes_read; -#if IDETAPE_DEBUG_LOG - if (tape->debug_level >= 4) - printk(KERN_INFO "ide-tape: Reached idetape_add_chrdev_read_request, %d blocks\n", blocks); -#endif /* IDETAPE_DEBUG_LOG */ + debug_log(DBG_PROCS, "Enter %s, %d blocks\n", __func__, blocks); /* * If we are at a filemark, return a read length of 0 @@ -2813,12 +2734,11 @@ static int idetape_rewind_tape (ide_drive_t *drive) { int retval; idetape_pc_t pc; -#if IDETAPE_DEBUG_LOG - idetape_tape_t *tape = drive->driver_data; - if (tape->debug_level >= 2) - printk(KERN_INFO "ide-tape: Reached idetape_rewind_tape\n"); -#endif /* IDETAPE_DEBUG_LOG */ - + idetape_tape_t *tape; + tape = drive->driver_data; + + debug_log(DBG_SENSE, "Enter %s\n", __func__); + idetape_create_rewind_cmd(drive, &pc); retval = idetape_queue_pc_tail(drive, &pc); if (retval) @@ -2849,10 +2769,8 @@ static int idetape_blkdev_ioctl(ide_drive_t *drive, unsigned int cmd, unsigned l int nr_stages; } config; -#if IDETAPE_DEBUG_LOG - if (tape->debug_level >= 4) - printk(KERN_INFO "ide-tape: Reached idetape_blkdev_ioctl\n"); -#endif /* IDETAPE_DEBUG_LOG */ + debug_log(DBG_PROCS, "Enter %s\n", __func__); + switch (cmd) { case 0x0340: if (copy_from_user(&config, argp, sizeof(config))) @@ -2985,10 +2903,7 @@ static ssize_t idetape_chrdev_read (struct file *file, char __user *buf, ssize_t ret = 0; u16 ctl = *(u16 *)&tape->caps[12]; -#if IDETAPE_DEBUG_LOG - if (tape->debug_level >= 3) - printk(KERN_INFO "ide-tape: Reached idetape_chrdev_read, count %Zd\n", count); -#endif /* IDETAPE_DEBUG_LOG */ + debug_log(DBG_CHRDEV, "Enter %s, count %Zd\n", __func__, count); if (tape->chrdev_direction != idetape_direction_read) { if (test_bit(IDETAPE_DETECT_BS, &tape->flags)) @@ -3030,10 +2945,8 @@ static ssize_t idetape_chrdev_read (struct file *file, char __user *buf, } finish: if (!actually_read && test_bit(IDETAPE_FILEMARK, &tape->flags)) { -#if IDETAPE_DEBUG_LOG - if (tape->debug_level >= 2) - printk(KERN_INFO "ide-tape: %s: spacing over filemark\n", tape->name); -#endif + debug_log(DBG_SENSE, "%s: spacing over filemark\n", tape->name); + idetape_space_over_filemarks(drive, MTFSF, 1); return 0; } @@ -3054,11 +2967,7 @@ static ssize_t idetape_chrdev_write (struct file *file, const char __user *buf, if (tape->write_prot) return -EACCES; -#if IDETAPE_DEBUG_LOG - if (tape->debug_level >= 3) - printk(KERN_INFO "ide-tape: Reached idetape_chrdev_write, " - "count %Zd\n", count); -#endif /* IDETAPE_DEBUG_LOG */ + debug_log(DBG_CHRDEV, "Enter %s, count %Zd\n", __func__, count); /* Initialize write operation */ if (tape->chrdev_direction != idetape_direction_write) { @@ -3168,11 +3077,8 @@ static int idetape_mtioctop(ide_drive_t *drive, short mt_op, int mt_count) idetape_pc_t pc; int i,retval; -#if IDETAPE_DEBUG_LOG - if (tape->debug_level >= 1) - printk(KERN_INFO "ide-tape: Handling MTIOCTOP ioctl: " - "mt_op=%d, mt_count=%d\n", mt_op, mt_count); -#endif /* IDETAPE_DEBUG_LOG */ + debug_log(DBG_ERR, "Handling MTIOCTOP ioctl: mt_op=%d, mt_count=%d\n", + mt_op, mt_count); /* * Commands which need our pipelined read-ahead stages. */ @@ -3292,11 +3198,7 @@ static int idetape_chrdev_ioctl(struct inode *inode, struct file *file, int block_offset = 0, position = tape->first_frame_position; void __user *argp = (void __user *)arg; -#if IDETAPE_DEBUG_LOG - if (tape->debug_level >= 3) - printk(KERN_INFO "ide-tape: Reached idetape_chrdev_ioctl, " - "cmd=%u\n", cmd); -#endif /* IDETAPE_DEBUG_LOG */ + debug_log(DBG_CHRDEV, "Enter %s, cmd=%u\n", __func__, cmd); tape->restart_speed_control_req = 1; if (tape->chrdev_direction == idetape_direction_write) { @@ -3372,6 +3274,15 @@ static int idetape_chrdev_open (struct inode *inode, struct file *filp) idetape_pc_t pc; int retval; + if (i >= MAX_HWIFS * MAX_DRIVES) + return -ENXIO; + + tape = ide_tape_chrdev_get(i); + if (!tape) + return -ENXIO; + + debug_log(DBG_CHRDEV, "Enter %s\n", __func__); + /* * We really want to do nonseekable_open(inode, filp); here, but some * versions of tar incorrectly call lseek on tapes and bail out if that @@ -3379,16 +3290,6 @@ static int idetape_chrdev_open (struct inode *inode, struct file *filp) */ filp->f_mode &= ~(FMODE_PREAD | FMODE_PWRITE); -#if IDETAPE_DEBUG_LOG - printk(KERN_INFO "ide-tape: Reached idetape_chrdev_open\n"); -#endif /* IDETAPE_DEBUG_LOG */ - - if (i >= MAX_HWIFS * MAX_DRIVES) - return -ENXIO; - - if (!(tape = ide_tape_chrdev_get(i))) - return -ENXIO; - drive = tape->drive; filp->private_data = tape; @@ -3479,10 +3380,8 @@ static int idetape_chrdev_release (struct inode *inode, struct file *filp) lock_kernel(); tape = drive->driver_data; -#if IDETAPE_DEBUG_LOG - if (tape->debug_level >= 3) - printk(KERN_INFO "ide-tape: Reached idetape_chrdev_release\n"); -#endif /* IDETAPE_DEBUG_LOG */ + + debug_log(DBG_CHRDEV, "Enter %s\n", __func__); if (tape->chrdev_direction == idetape_direction_write) idetape_write_release(drive, minor); @@ -3650,7 +3549,8 @@ static void idetape_add_settings (ide_drive_t *drive) ide_add_setting(drive, "pipeline_head_speed_c",SETTING_READ, TYPE_INT, 0, 0xffff, 1, 1, &tape->controlled_pipeline_head_speed, NULL); ide_add_setting(drive, "pipeline_head_speed_u",SETTING_READ, TYPE_INT, 0, 0xffff, 1, 1, &tape->uncontrolled_pipeline_head_speed,NULL); ide_add_setting(drive, "avg_speed", SETTING_READ, TYPE_INT, 0, 0xffff, 1, 1, &tape->avg_speed, NULL); - ide_add_setting(drive, "debug_level", SETTING_RW, TYPE_INT, 0, 0xffff, 1, 1, &tape->debug_level, NULL); + ide_add_setting(drive, "debug_mask", SETTING_RW, TYPE_INT, 0, 0xffff, 1, + 1, &tape->debug_mask, NULL); } #else static inline void idetape_add_settings(ide_drive_t *drive) { ; } -- cgit v1.2.3 From a2f5b7f42a73e99518a719189570da43c6b66657 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Wed, 6 Feb 2008 02:57:51 +0100 Subject: ide-tape: remove struct idetape_read_position_result_t There should be no functional changes resulting from this patch. Bart: - remove needless "!!" Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-tape.c | 50 ++++++++++++++++++-------------------------------- 1 file changed, 18 insertions(+), 32 deletions(-) (limited to 'drivers/ide/ide-tape.c') diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 64d46fef2602..3c516ff1adf0 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -571,24 +571,6 @@ struct idetape_id_gcw { unsigned protocol :2; /* Protocol type */ }; -/* - * READ POSITION packet command - Data Format (From Table 6-57) - */ -typedef struct { - unsigned reserved0_10 :2; /* Reserved */ - unsigned bpu :1; /* Block Position Unknown */ - unsigned reserved0_543 :3; /* Reserved */ - unsigned eop :1; /* End Of Partition */ - unsigned bop :1; /* Beginning Of Partition */ - u8 partition; /* Partition Number */ - u8 reserved2, reserved3; /* Reserved */ - u32 first_block; /* First Block Location */ - u32 last_block; /* Last Block Location (Optional) */ - u8 reserved12; /* Reserved */ - u8 blocks_in_buffer[3]; /* Blocks In Buffer - (Optional) */ - u32 bytes_in_buffer; /* Bytes In Buffer (Optional) */ -} idetape_read_position_result_t; - /* Structures related to the SELECT SENSE / MODE SENSE packet commands. */ #define IDETAPE_BLOCK_DESCRIPTOR 0 #define IDETAPE_CAPABILITIES_PAGE 0x2a @@ -2000,30 +1982,34 @@ static void idetape_wait_for_request (ide_drive_t *drive, struct request *rq) spin_lock_irq(&tape->spinlock); } -static ide_startstop_t idetape_read_position_callback (ide_drive_t *drive) +static ide_startstop_t idetape_read_position_callback(ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; - idetape_read_position_result_t *result; + u8 *readpos = tape->pc->buffer; debug_log(DBG_PROCS, "Enter %s\n", __func__); if (!tape->pc->error) { - result = (idetape_read_position_result_t *) tape->pc->buffer; - debug_log(DBG_SENSE, "BOP - %s\n", result->bop ? "Yes" : "No"); - debug_log(DBG_SENSE, "EOP - %s\n", result->eop ? "Yes" : "No"); - - if (result->bpu) { - printk(KERN_INFO "ide-tape: Block location is unknown to the tape\n"); + debug_log(DBG_SENSE, "BOP - %s\n", + (readpos[0] & 0x80) ? "Yes" : "No"); + debug_log(DBG_SENSE, "EOP - %s\n", + (readpos[0] & 0x40) ? "Yes" : "No"); + + if (readpos[0] & 0x4) { + printk(KERN_INFO "ide-tape: Block location is unknown" + "to the tape\n"); clear_bit(IDETAPE_ADDRESS_VALID, &tape->flags); idetape_end_request(drive, 0, 0); } else { debug_log(DBG_SENSE, "Block Location - %u\n", - ntohl(result->first_block)); - - tape->partition = result->partition; - tape->first_frame_position = ntohl(result->first_block); - tape->last_frame_position = ntohl(result->last_block); - tape->blocks_in_buffer = result->blocks_in_buffer[2]; + be32_to_cpu(*(u32 *)&readpos[4])); + + tape->partition = readpos[1]; + tape->first_frame_position = + be32_to_cpu(*(u32 *)&readpos[4]); + tape->last_frame_position = + be32_to_cpu(*(u32 *)&readpos[8]); + tape->blocks_in_buffer = readpos[15]; set_bit(IDETAPE_ADDRESS_VALID, &tape->flags); idetape_end_request(drive, 1, 0); } -- cgit v1.2.3 From 37016bab601c2fecfe833d2feda42e6c6f9b08c8 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Wed, 6 Feb 2008 02:57:52 +0100 Subject: ide-tape: remove unreachable code chunk tape->speed_control is set to 1 in idetape_setup(), but, in calculate_speeds() its value is tested for being 0, 1, or 2. Remove the if-branches where tape->speed_control != 1 since they are never executed. Also, rename calculate_speeds() by adding driver's prefix as is with the other function names. Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-tape.c | 22 ++++++++++------------ 1 file changed, 10 insertions(+), 12 deletions(-) (limited to 'drivers/ide/ide-tape.c') diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 3c516ff1adf0..1dc4a9ec36fc 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -87,7 +87,8 @@ enum { * the optimum value or until we reach MAX. * * Setting the following parameter to 0 is illegal: the pipelined mode - * cannot be disabled (calculate_speeds() divides by tape->max_stages.) + * cannot be disabled (idetape_calculate_speeds() divides by + * tape->max_stages.) */ #define IDETAPE_MIN_PIPELINE_STAGES 1 #define IDETAPE_MAX_PIPELINE_STAGES 400 @@ -1475,10 +1476,9 @@ static void idetape_create_mode_sense_cmd (idetape_pc_t *pc, u8 page_code) pc->callback = &idetape_pc_callback; } -static void calculate_speeds(ide_drive_t *drive) +static void idetape_calculate_speeds(ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; - int full = 125, empty = 75; if (time_after(jiffies, tape->controlled_pipeline_head_time + 120 * HZ)) { tape->controlled_previous_pipeline_head = tape->controlled_last_pipeline_head; @@ -1505,22 +1505,20 @@ static void calculate_speeds(ide_drive_t *drive) } } tape->pipeline_head_speed = max(tape->uncontrolled_pipeline_head_speed, tape->controlled_pipeline_head_speed); - if (tape->speed_control == 0) { - tape->max_insert_speed = 5000; - } else if (tape->speed_control == 1) { + + if (tape->speed_control == 1) { if (tape->nr_pending_stages >= tape->max_stages / 2) tape->max_insert_speed = tape->pipeline_head_speed + (1100 - tape->pipeline_head_speed) * 2 * (tape->nr_pending_stages - tape->max_stages / 2) / tape->max_stages; else tape->max_insert_speed = 500 + (tape->pipeline_head_speed - 500) * 2 * tape->nr_pending_stages / tape->max_stages; + if (tape->nr_pending_stages >= tape->max_stages * 99 / 100) tape->max_insert_speed = 5000; - } else if (tape->speed_control == 2) { - tape->max_insert_speed = tape->pipeline_head_speed * empty / 100 + - (tape->pipeline_head_speed * full / 100 - tape->pipeline_head_speed * empty / 100) * tape->nr_pending_stages / tape->max_stages; } else tape->max_insert_speed = tape->speed_control; + tape->max_insert_speed = max(tape->max_insert_speed, 500); } @@ -1698,7 +1696,7 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive, tape->measure_insert_time = 1; if (time_after(jiffies, tape->insert_time)) tape->insert_speed = tape->insert_size / 1024 * HZ / (jiffies - tape->insert_time); - calculate_speeds(drive); + idetape_calculate_speeds(drive); if (!test_and_clear_bit(IDETAPE_IGNORE_DSC, &tape->flags) && (stat & SEEK_STAT) == 0) { if (postponed_rq == NULL) { @@ -2419,7 +2417,7 @@ static int idetape_add_chrdev_write_request (ide_drive_t *drive, int blocks) idetape_switch_buffers(tape, new_stage); idetape_add_stage_tail(drive, new_stage); tape->pipeline_head++; - calculate_speeds(drive); + idetape_calculate_speeds(drive); /* * Estimate whether the tape has stopped writing by checking @@ -2659,7 +2657,7 @@ static int idetape_add_chrdev_read_request (ide_drive_t *drive,int blocks) idetape_remove_stage_head(drive); spin_unlock_irqrestore(&tape->spinlock, flags); tape->pipeline_head++; - calculate_speeds(drive); + idetape_calculate_speeds(drive); } if (bytes_read > blocks * tape->tape_block_size) { printk(KERN_ERR "ide-tape: bug: trying to return more bytes than requested\n"); -- cgit v1.2.3 From a1efc85f0b4d48627ef0b2aeb766a39fb4a00561 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Wed, 6 Feb 2008 02:57:52 +0100 Subject: ide-tape: simplify code branching in the interrupt handler ... by adding a new typedef function pointer idetape_io_buf in order to call the proper buffer i/o handler depending on the data direction. Bart: - move idetape_io_buf before idetape_pc_intr() comment Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-tape.c | 54 ++++++++++++++++++++++++++------------------------ 1 file changed, 28 insertions(+), 26 deletions(-) (limited to 'drivers/ide/ide-tape.c') diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 1dc4a9ec36fc..8b6af1e0ed2d 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -1104,19 +1104,22 @@ static void idetape_postpone_request (ide_drive_t *drive) ide_stall_queue(drive, tape->dsc_polling_frequency); } +typedef void idetape_io_buf(ide_drive_t *, idetape_pc_t *, unsigned int); + /* - * idetape_pc_intr is the usual interrupt handler which will be called - * during a packet command. We will transfer some of the data (as - * requested by the drive) and will re-point interrupt handler to us. - * When data transfer is finished, we will act according to the - * algorithm described before idetape_issue_packet_command. - * + * This is the usual interrupt handler which will be called during a packet + * command. We will transfer some of the data (as requested by the drive) and + * will re-point interrupt handler to us. When data transfer is finished, we + * will act according to the algorithm described before + * idetape_issue_packet_command. */ -static ide_startstop_t idetape_pc_intr (ide_drive_t *drive) +static ide_startstop_t idetape_pc_intr(ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; idetape_tape_t *tape = drive->driver_data; idetape_pc_t *pc = tape->pc; + xfer_func_t *xferfunc; + idetape_io_buf *iobuf; unsigned int temp; #if SIMULATE_ERRORS static int error_sim_count = 0; @@ -1184,7 +1187,8 @@ static ide_startstop_t idetape_pc_intr (ide_drive_t *drive) debug_log(DBG_ERR, "%s: I/O error\n", tape->name); if (pc->c[0] == REQUEST_SENSE) { - printk(KERN_ERR "ide-tape: I/O error in request sense command\n"); + printk(KERN_ERR "ide-tape: I/O error in request" + " sense command\n"); return ide_do_reset(drive); } debug_log(DBG_ERR, "[cmd %x]: check condition\n", @@ -1223,7 +1227,7 @@ static ide_startstop_t idetape_pc_intr (ide_drive_t *drive) ireason = hwif->INB(IDE_IREASON_REG); if (ireason & CD) { - printk(KERN_ERR "ide-tape: CoD != 0 in idetape_pc_intr\n"); + printk(KERN_ERR "ide-tape: CoD != 0 in %s\n", __func__); return ide_do_reset(drive); } if (((ireason & IO) == IO) == test_bit(PC_WRITING, &pc->flags)) { @@ -1239,31 +1243,29 @@ static ide_startstop_t idetape_pc_intr (ide_drive_t *drive) temp = pc->actually_transferred + bcount; if (temp > pc->request_transfer) { if (temp > pc->buffer_size) { - printk(KERN_ERR "ide-tape: The tape wants to send us more data than expected - discarding data\n"); + printk(KERN_ERR "ide-tape: The tape wants to " + "send us more data than expected " + "- discarding data\n"); idetape_discard_data(drive, bcount); - ide_set_handler(drive, &idetape_pc_intr, IDETAPE_WAIT_CMD, NULL); + ide_set_handler(drive, &idetape_pc_intr, + IDETAPE_WAIT_CMD, NULL); return ide_started; } debug_log(DBG_SENSE, "The tape wants to send us more " "data than expected - allowing transfer\n"); - } - } - if (test_bit(PC_WRITING, &pc->flags)) { - if (pc->bh != NULL) - idetape_output_buffers(drive, pc, bcount); - else - /* Write the current buffer */ - hwif->atapi_output_bytes(drive, pc->current_position, - bcount); + iobuf = &idetape_input_buffers; + xferfunc = hwif->atapi_input_bytes; } else { - if (pc->bh != NULL) - idetape_input_buffers(drive, pc, bcount); - else - /* Read the current buffer */ - hwif->atapi_input_bytes(drive, pc->current_position, - bcount); + iobuf = &idetape_output_buffers; + xferfunc = hwif->atapi_output_bytes; } + + if (pc->bh) + iobuf(drive, pc, bcount); + else + xferfunc(drive, pc->current_position, bcount); + /* Update the current position */ pc->actually_transferred += bcount; pc->current_position += bcount; -- cgit v1.2.3 From 54abf37e4236288687ee44fef2060092b42f5cec Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Wed, 6 Feb 2008 02:57:52 +0100 Subject: ide-tape: remove typedef idetape_chrdev_direction_t .. and replace it with plain enums. Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-tape.c | 62 ++++++++++++++++++++++++++------------------------ 1 file changed, 32 insertions(+), 30 deletions(-) (limited to 'drivers/ide/ide-tape.c') diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 8b6af1e0ed2d..73f06c859301 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -184,11 +184,13 @@ enum { /* * For general magnetic tape device compatibility. */ -typedef enum { - idetape_direction_none, - idetape_direction_read, - idetape_direction_write -} idetape_chrdev_direction_t; + +/* tape directions */ +enum { + IDETAPE_DIR_NONE = (1 << 0), + IDETAPE_DIR_READ = (1 << 1), + IDETAPE_DIR_WRITE = (1 << 2), +}; struct idetape_bh { u32 b_size; @@ -324,7 +326,7 @@ typedef struct ide_tape_obj { /* device name */ char name[4]; /* Current character device data transfer direction */ - idetape_chrdev_direction_t chrdev_direction; + u8 chrdev_dir; /* * Device information @@ -1916,7 +1918,7 @@ static void idetape_init_merge_stage (idetape_tape_t *tape) struct idetape_bh *bh = tape->merge_stage->bh; tape->bh = bh; - if (tape->chrdev_direction == idetape_direction_write) + if (tape->chrdev_dir == IDETAPE_DIR_WRITE) atomic_set(&bh->b_count, 0); else { tape->b_data = bh->b_data; @@ -2186,7 +2188,7 @@ static int __idetape_discard_read_pipeline (ide_drive_t *drive) unsigned long flags; int cnt; - if (tape->chrdev_direction != idetape_direction_read) + if (tape->chrdev_dir != IDETAPE_DIR_READ) return 0; /* Remove merge stage. */ @@ -2201,7 +2203,7 @@ static int __idetape_discard_read_pipeline (ide_drive_t *drive) /* Clear pipeline flags. */ clear_bit(IDETAPE_PIPELINE_ERROR, &tape->flags); - tape->chrdev_direction = idetape_direction_none; + tape->chrdev_dir = IDETAPE_DIR_NONE; /* Remove pipeline stages. */ if (tape->first_stage == NULL) @@ -2241,7 +2243,7 @@ static int idetape_position_tape (ide_drive_t *drive, unsigned int block, u8 par int retval; idetape_pc_t pc; - if (tape->chrdev_direction == idetape_direction_read) + if (tape->chrdev_dir == IDETAPE_DIR_READ) __idetape_discard_read_pipeline(drive); idetape_wait_ready(drive, 60 * 5 * HZ); idetape_create_locate_cmd(drive, &pc, block, partition, skip); @@ -2468,7 +2470,7 @@ static void idetape_empty_write_pipeline (ide_drive_t *drive) int blocks, min; struct idetape_bh *bh; - if (tape->chrdev_direction != idetape_direction_write) { + if (tape->chrdev_dir != IDETAPE_DIR_WRITE) { printk(KERN_ERR "ide-tape: bug: Trying to empty write pipeline, but we are not writing.\n"); return; } @@ -2511,7 +2513,7 @@ static void idetape_empty_write_pipeline (ide_drive_t *drive) tape->merge_stage = NULL; } clear_bit(IDETAPE_PIPELINE_ERROR, &tape->flags); - tape->chrdev_direction = idetape_direction_none; + tape->chrdev_dir = IDETAPE_DIR_NONE; /* * On the next backup, perform the feedback loop again. @@ -2555,8 +2557,8 @@ static int idetape_initiate_read (ide_drive_t *drive, int max_stages) u16 blocks = *(u16 *)&tape->caps[12]; /* Initialize read operation */ - if (tape->chrdev_direction != idetape_direction_read) { - if (tape->chrdev_direction == idetape_direction_write) { + if (tape->chrdev_dir != IDETAPE_DIR_READ) { + if (tape->chrdev_dir == IDETAPE_DIR_WRITE) { idetape_empty_write_pipeline(drive); idetape_flush_tape_buffers(drive); } @@ -2566,7 +2568,7 @@ static int idetape_initiate_read (ide_drive_t *drive, int max_stages) } if ((tape->merge_stage = __idetape_kmalloc_stage(tape, 0, 0)) == NULL) return -ENOMEM; - tape->chrdev_direction = idetape_direction_read; + tape->chrdev_dir = IDETAPE_DIR_READ; /* * Issue a read 0 command to ensure that DSC handshake @@ -2580,7 +2582,7 @@ static int idetape_initiate_read (ide_drive_t *drive, int max_stages) if (bytes_read < 0) { __idetape_kfree_stage(tape->merge_stage); tape->merge_stage = NULL; - tape->chrdev_direction = idetape_direction_none; + tape->chrdev_dir = IDETAPE_DIR_NONE; return bytes_read; } } @@ -2801,7 +2803,7 @@ static int idetape_space_over_filemarks (ide_drive_t *drive,short mt_op,int mt_c mt_count = - mt_count; } - if (tape->chrdev_direction == idetape_direction_read) { + if (tape->chrdev_dir == IDETAPE_DIR_READ) { /* * We have a read-ahead buffer. Scan it for crossed * filemarks. @@ -2891,7 +2893,7 @@ static ssize_t idetape_chrdev_read (struct file *file, char __user *buf, debug_log(DBG_CHRDEV, "Enter %s, count %Zd\n", __func__, count); - if (tape->chrdev_direction != idetape_direction_read) { + if (tape->chrdev_dir != IDETAPE_DIR_READ) { if (test_bit(IDETAPE_DETECT_BS, &tape->flags)) if (count > tape->tape_block_size && (count % tape->tape_block_size) == 0) @@ -2956,8 +2958,8 @@ static ssize_t idetape_chrdev_write (struct file *file, const char __user *buf, debug_log(DBG_CHRDEV, "Enter %s, count %Zd\n", __func__, count); /* Initialize write operation */ - if (tape->chrdev_direction != idetape_direction_write) { - if (tape->chrdev_direction == idetape_direction_read) + if (tape->chrdev_dir != IDETAPE_DIR_WRITE) { + if (tape->chrdev_dir == IDETAPE_DIR_READ) idetape_discard_read_pipeline(drive, 1); if (tape->merge_stage || tape->merge_stage_size) { printk(KERN_ERR "ide-tape: merge_stage_size " @@ -2966,7 +2968,7 @@ static ssize_t idetape_chrdev_write (struct file *file, const char __user *buf, } if ((tape->merge_stage = __idetape_kmalloc_stage(tape, 0, 0)) == NULL) return -ENOMEM; - tape->chrdev_direction = idetape_direction_write; + tape->chrdev_dir = IDETAPE_DIR_WRITE; idetape_init_merge_stage(tape); /* @@ -2981,7 +2983,7 @@ static ssize_t idetape_chrdev_write (struct file *file, const char __user *buf, if (retval < 0) { __idetape_kfree_stage(tape->merge_stage); tape->merge_stage = NULL; - tape->chrdev_direction = idetape_direction_none; + tape->chrdev_dir = IDETAPE_DIR_NONE; return retval; } } @@ -3187,7 +3189,7 @@ static int idetape_chrdev_ioctl(struct inode *inode, struct file *file, debug_log(DBG_CHRDEV, "Enter %s, cmd=%u\n", __func__, cmd); tape->restart_speed_control_req = 1; - if (tape->chrdev_direction == idetape_direction_write) { + if (tape->chrdev_dir == IDETAPE_DIR_WRITE) { idetape_empty_write_pipeline(drive); idetape_flush_tape_buffers(drive); } @@ -3218,7 +3220,7 @@ static int idetape_chrdev_ioctl(struct inode *inode, struct file *file, return -EFAULT; return 0; default: - if (tape->chrdev_direction == idetape_direction_read) + if (tape->chrdev_dir == IDETAPE_DIR_READ) idetape_discard_read_pipeline(drive, 1); return idetape_blkdev_ioctl(drive, cmd, arg); } @@ -3296,7 +3298,7 @@ static int idetape_chrdev_open (struct inode *inode, struct file *filp) if (!test_bit(IDETAPE_ADDRESS_VALID, &tape->flags)) (void)idetape_rewind_tape(drive); - if (tape->chrdev_direction != idetape_direction_read) + if (tape->chrdev_dir != IDETAPE_DIR_READ) clear_bit(IDETAPE_PIPELINE_ERROR, &tape->flags); /* Read block size and write protect status from drive. */ @@ -3321,7 +3323,7 @@ static int idetape_chrdev_open (struct inode *inode, struct file *filp) /* * Lock the tape drive door so user can't eject. */ - if (tape->chrdev_direction == idetape_direction_none) { + if (tape->chrdev_dir == IDETAPE_DIR_NONE) { if (idetape_create_prevent_cmd(drive, &pc, 1)) { if (!idetape_queue_pc_tail(drive, &pc)) { if (tape->door_locked != DOOR_EXPLICITLY_LOCKED) @@ -3369,9 +3371,9 @@ static int idetape_chrdev_release (struct inode *inode, struct file *filp) debug_log(DBG_CHRDEV, "Enter %s\n", __func__); - if (tape->chrdev_direction == idetape_direction_write) + if (tape->chrdev_dir == IDETAPE_DIR_WRITE) idetape_write_release(drive, minor); - if (tape->chrdev_direction == idetape_direction_read) { + if (tape->chrdev_dir == IDETAPE_DIR_READ) { if (minor < 128) idetape_discard_read_pipeline(drive, 1); else @@ -3383,7 +3385,7 @@ static int idetape_chrdev_release (struct inode *inode, struct file *filp) } if (minor < 128 && test_bit(IDETAPE_MEDIUM_PRESENT, &tape->flags)) (void) idetape_rewind_tape(drive); - if (tape->chrdev_direction == idetape_direction_none) { + if (tape->chrdev_dir == IDETAPE_DIR_NONE) { if (tape->door_locked == DOOR_LOCKED) { if (idetape_create_prevent_cmd(drive, &pc, 0)) { if (!idetape_queue_pc_tail(drive, &pc)) @@ -3577,7 +3579,7 @@ static void idetape_setup (ide_drive_t *drive, idetape_tape_t *tape, int minor) tape->name[0] = 'h'; tape->name[1] = 't'; tape->name[2] = '0' + minor; - tape->chrdev_direction = idetape_direction_none; + tape->chrdev_dir = IDETAPE_DIR_NONE; tape->pc = tape->pc_stack; tape->max_insert_speed = 10000; tape->speed_control = 1; -- cgit v1.2.3 From 41f81d545b6b1f585a02d1d8545978714f710e91 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Wed, 6 Feb 2008 02:57:52 +0100 Subject: ide-tape: struct idetape_tape_t: remove unused members - last_frame_position: only being written to once - firmware_revision, product_id, vendor_id: used once, remove from struct idetape_tape_t and deal with them locally - firmware_revision_num: only written to once - tape_still_time_begin: completely unused - tape_still_time: never written to; remove corresponding code chunk - uncontrolled_last_pipeline_head: only once written to - blocks_in_buffer: only written to Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-tape.c | 45 +++++++++++---------------------------------- 1 file changed, 11 insertions(+), 34 deletions(-) (limited to 'drivers/ide/ide-tape.c') diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 73f06c859301..ad13527ff440 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -311,8 +311,6 @@ typedef struct ide_tape_obj { u8 partition; /* Current block */ unsigned int first_frame_position; - unsigned int last_frame_position; - unsigned int blocks_in_buffer; /* * Last error information @@ -399,11 +397,6 @@ typedef struct ide_tape_obj { int avg_size; int avg_speed; - char vendor_id[10]; - char product_id[18]; - char firmware_revision[6]; - int firmware_revision_num; - /* the door is currently locked */ int door_locked; /* the tape hardware is write protected */ @@ -440,12 +433,6 @@ typedef struct ide_tape_obj { int max_insert_speed; int measure_insert_time; - /* - * Measure tape still time, in milliseconds - */ - unsigned long tape_still_time_begin; - int tape_still_time; - /* * Speed regulation negative feedback loop */ @@ -454,7 +441,6 @@ typedef struct ide_tape_obj { int controlled_pipeline_head_speed; int uncontrolled_pipeline_head_speed; int controlled_last_pipeline_head; - int uncontrolled_last_pipeline_head; unsigned long uncontrolled_pipeline_head_time; unsigned long controlled_pipeline_head_time; int controlled_previous_pipeline_head; @@ -1696,8 +1682,6 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive, drive->post_reset = 0; } - if (tape->tape_still_time > 100 && tape->tape_still_time < 200) - tape->measure_insert_time = 1; if (time_after(jiffies, tape->insert_time)) tape->insert_speed = tape->insert_size / 1024 * HZ / (jiffies - tape->insert_time); idetape_calculate_speeds(drive); @@ -2009,9 +1993,6 @@ static ide_startstop_t idetape_read_position_callback(ide_drive_t *drive) tape->partition = readpos[1]; tape->first_frame_position = be32_to_cpu(*(u32 *)&readpos[4]); - tape->last_frame_position = - be32_to_cpu(*(u32 *)&readpos[8]); - tape->blocks_in_buffer = readpos[15]; set_bit(IDETAPE_ADDRESS_VALID, &tape->flags); idetape_end_request(drive, 1, 0); } @@ -2540,7 +2521,7 @@ static void idetape_restart_speed_control (ide_drive_t *drive) tape->restart_speed_control_req = 0; tape->pipeline_head = 0; - tape->controlled_last_pipeline_head = tape->uncontrolled_last_pipeline_head = 0; + tape->controlled_last_pipeline_head = 0; tape->controlled_previous_pipeline_head = tape->uncontrolled_previous_pipeline_head = 0; tape->pipeline_head_speed = tape->controlled_pipeline_head_speed = 5000; tape->uncontrolled_pipeline_head_speed = 0; @@ -3438,9 +3419,9 @@ static int idetape_identify_device (ide_drive_t *drive) static void idetape_get_inquiry_results(ide_drive_t *drive) { - char *r; idetape_tape_t *tape = drive->driver_data; idetape_pc_t pc; + char fw_rev[6], vendor_id[10], product_id[18]; idetape_create_inquiry_cmd(&pc); if (idetape_queue_pc_tail(drive, &pc)) { @@ -3448,20 +3429,16 @@ static void idetape_get_inquiry_results(ide_drive_t *drive) tape->name); return; } - memcpy(tape->vendor_id, &pc.buffer[8], 8); - memcpy(tape->product_id, &pc.buffer[16], 16); - memcpy(tape->firmware_revision, &pc.buffer[32], 4); - - ide_fixstring(tape->vendor_id, 10, 0); - ide_fixstring(tape->product_id, 18, 0); - ide_fixstring(tape->firmware_revision, 6, 0); - r = tape->firmware_revision; - if (*(r + 1) == '.') - tape->firmware_revision_num = (*r - '0') * 100 + - (*(r + 2) - '0') * 10 + *(r + 3) - '0'; + memcpy(vendor_id, &pc.buffer[8], 8); + memcpy(product_id, &pc.buffer[16], 16); + memcpy(fw_rev, &pc.buffer[32], 4); + + ide_fixstring(vendor_id, 10, 0); + ide_fixstring(product_id, 18, 0); + ide_fixstring(fw_rev, 6, 0); + printk(KERN_INFO "ide-tape: %s <-> %s: %s %s rev %s\n", - drive->name, tape->name, tape->vendor_id, - tape->product_id, tape->firmware_revision); + drive->name, tape->name, vendor_id, product_id, fw_rev); } /* -- cgit v1.2.3 From 54bb2074ce52fc8fce0d898b3c9921f4a951eb80 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Wed, 6 Feb 2008 02:57:52 +0100 Subject: ide-tape: struct idetape_tape_t: shorten member names v2 Shorten some member names not too aggressively since this driver might be gone anyway soon. Bart: - minor fixes Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-tape.c | 210 ++++++++++++++++++++++++++----------------------- 1 file changed, 113 insertions(+), 97 deletions(-) (limited to 'drivers/ide/ide-tape.c') diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index ad13527ff440..2fe4e8fdf3da 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -299,10 +299,8 @@ typedef struct ide_tape_obj { /* Timer used to poll for dsc */ struct timer_list dsc_timer; /* Read/Write dsc polling frequency */ - unsigned long best_dsc_rw_frequency; - /* The current polling frequency */ - unsigned long dsc_polling_frequency; - /* Maximum waiting time */ + unsigned long best_dsc_rw_freq; + unsigned long dsc_poll_freq; unsigned long dsc_timeout; /* @@ -310,7 +308,7 @@ typedef struct ide_tape_obj { */ u8 partition; /* Current block */ - unsigned int first_frame_position; + unsigned int first_frame; /* * Last error information @@ -326,11 +324,8 @@ typedef struct ide_tape_obj { /* Current character device data transfer direction */ u8 chrdev_dir; - /* - * Device information - */ - /* Usually 512 or 1024 bytes */ - unsigned short tape_block_size; + /* tape block size, usually 512 or 1024 bytes */ + unsigned short blk_size; int user_bs_factor; /* Copy of the tape's Capabilities and Mechanical Page */ @@ -349,8 +344,8 @@ typedef struct ide_tape_obj { * The data buffer size is chosen based on the tape's * recommendation. */ - /* Pointer to the request which is waiting in the device request queue */ - struct request *active_data_request; + /* Ptr to the request which is waiting in the device request queue */ + struct request *active_data_rq; /* Data buffer size (chosen based on the tape's recommendation */ int stage_size; idetape_stage_t *merge_stage; @@ -388,7 +383,7 @@ typedef struct ide_tape_obj { /* Status/Action flags: long for set_bit */ unsigned long flags; /* protects the ide-tape queue */ - spinlock_t spinlock; + spinlock_t lock; /* * Measures average tape speed @@ -750,7 +745,7 @@ static void idetape_analyze_error(ide_drive_t *drive, u8 *sense) /* Correct pc->actually_transferred by asking the tape. */ if (test_bit(PC_DMA_ERROR, &pc->flags)) { pc->actually_transferred = pc->request_transfer - - tape->tape_block_size * + tape->blk_size * be32_to_cpu(get_unaligned((u32 *)&sense[3])); idetape_update_buffers(pc); } @@ -809,7 +804,7 @@ static void idetape_activate_next_stage(ide_drive_t *drive) rq->rq_disk = tape->disk; rq->buffer = NULL; rq->special = (void *)stage->bh; - tape->active_data_request = rq; + tape->active_data_rq = rq; tape->active_stage = stage; tape->next_stage = stage->next; } @@ -951,13 +946,13 @@ static int idetape_end_request(ide_drive_t *drive, int uptodate, int nr_sects) return 0; } - spin_lock_irqsave(&tape->spinlock, flags); + spin_lock_irqsave(&tape->lock, flags); /* The request was a pipelined data transfer request */ - if (tape->active_data_request == rq) { + if (tape->active_data_rq == rq) { active_stage = tape->active_stage; tape->active_stage = NULL; - tape->active_data_request = NULL; + tape->active_data_rq = NULL; tape->nr_pending_stages--; if (rq->cmd[0] & REQ_IDETAPE_WRITE) { remove_stage = 1; @@ -978,7 +973,8 @@ static int idetape_end_request(ide_drive_t *drive, int uptodate, int nr_sects) /* * Insert the next request into the request queue. */ - (void) ide_do_drive_cmd(drive, tape->active_data_request, ide_end); + (void)ide_do_drive_cmd(drive, tape->active_data_rq, + ide_end); } else if (!error) { idetape_increase_max_pipeline_stages(drive); } @@ -990,9 +986,9 @@ static int idetape_end_request(ide_drive_t *drive, int uptodate, int nr_sects) if (remove_stage) idetape_remove_stage_head(drive); - if (tape->active_data_request == NULL) + if (tape->active_data_rq == NULL) clear_bit(IDETAPE_PIPELINE_ACTIVE, &tape->flags); - spin_unlock_irqrestore(&tape->spinlock, flags); + spin_unlock_irqrestore(&tape->lock, flags); return 0; } @@ -1089,7 +1085,7 @@ static void idetape_postpone_request (ide_drive_t *drive) debug_log(DBG_PROCS, "Enter %s\n", __func__); tape->postponed_rq = HWGROUP(drive)->rq; - ide_stall_queue(drive, tape->dsc_polling_frequency); + ide_stall_queue(drive, tape->dsc_poll_freq); } typedef void idetape_io_buf(ide_drive_t *, idetape_pc_t *, unsigned int); @@ -1190,7 +1186,7 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive) (stat & SEEK_STAT) == 0) { /* Media access command */ tape->dsc_polling_start = jiffies; - tape->dsc_polling_frequency = IDETAPE_DSC_MA_FAST; + tape->dsc_poll_freq = IDETAPE_DSC_MA_FAST; tape->dsc_timeout = jiffies + IDETAPE_DSC_MA_TIMEOUT; /* Allow ide.c to handle other requests */ idetape_postpone_request(drive); @@ -1543,10 +1539,10 @@ static ide_startstop_t idetape_rw_callback (ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; struct request *rq = HWGROUP(drive)->rq; - int blocks = tape->pc->actually_transferred / tape->tape_block_size; + int blocks = tape->pc->actually_transferred / tape->blk_size; - tape->avg_size += blocks * tape->tape_block_size; - tape->insert_size += blocks * tape->tape_block_size; + tape->avg_size += blocks * tape->blk_size; + tape->insert_size += blocks * tape->blk_size; if (tape->insert_size > 1024 * 1024) tape->measure_insert_time = 1; if (tape->measure_insert_time) { @@ -1563,7 +1559,7 @@ static ide_startstop_t idetape_rw_callback (ide_drive_t *drive) } debug_log(DBG_PROCS, "Enter %s\n", __func__); - tape->first_frame_position += blocks; + tape->first_frame += blocks; rq->current_nr_sectors -= blocks; if (!tape->pc->error) @@ -1583,7 +1579,8 @@ static void idetape_create_read_cmd(idetape_tape_t *tape, idetape_pc_t *pc, unsi pc->bh = bh; atomic_set(&bh->b_count, 0); pc->buffer = NULL; - pc->request_transfer = pc->buffer_size = length * tape->tape_block_size; + pc->buffer_size = length * tape->blk_size; + pc->request_transfer = pc->buffer_size; if (pc->request_transfer == tape->stage_size) set_bit(PC_DMA_RECOMMENDED, &pc->flags); } @@ -1621,7 +1618,8 @@ static void idetape_create_write_cmd(idetape_tape_t *tape, idetape_pc_t *pc, uns pc->b_data = bh->b_data; pc->b_count = atomic_read(&bh->b_count); pc->buffer = NULL; - pc->request_transfer = pc->buffer_size = length * tape->tape_block_size; + pc->buffer_size = length * tape->blk_size; + pc->request_transfer = pc->buffer_size; if (pc->request_transfer == tape->stage_size) set_bit(PC_DMA_RECOMMENDED, &pc->flags); } @@ -1689,7 +1687,7 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive, (stat & SEEK_STAT) == 0) { if (postponed_rq == NULL) { tape->dsc_polling_start = jiffies; - tape->dsc_polling_frequency = tape->best_dsc_rw_frequency; + tape->dsc_poll_freq = tape->best_dsc_rw_freq; tape->dsc_timeout = jiffies + IDETAPE_DSC_RW_TIMEOUT; } else if (time_after(jiffies, tape->dsc_timeout)) { printk(KERN_ERR "ide-tape: %s: DSC timeout\n", @@ -1701,7 +1699,7 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive, return ide_do_reset(drive); } } else if (time_after(jiffies, tape->dsc_polling_start + IDETAPE_DSC_MA_THRESHOLD)) - tape->dsc_polling_frequency = IDETAPE_DSC_MA_SLOW; + tape->dsc_poll_freq = IDETAPE_DSC_MA_SLOW; idetape_postpone_request(drive); return ide_stopped; } @@ -1748,7 +1746,7 @@ static inline int idetape_pipeline_active (idetape_tape_t *tape) int rc1, rc2; rc1 = test_bit(IDETAPE_PIPELINE_ACTIVE, &tape->flags); - rc2 = (tape->active_data_request != NULL); + rc2 = (tape->active_data_rq != NULL); return rc1; } @@ -1930,7 +1928,7 @@ static void idetape_add_stage_tail (ide_drive_t *drive,idetape_stage_t *stage) debug_log(DBG_PROCS, "Enter %s\n", __func__); - spin_lock_irqsave(&tape->spinlock, flags); + spin_lock_irqsave(&tape->lock, flags); stage->next = NULL; if (tape->last_stage != NULL) tape->last_stage->next=stage; @@ -1941,7 +1939,7 @@ static void idetape_add_stage_tail (ide_drive_t *drive,idetape_stage_t *stage) tape->next_stage = tape->last_stage; tape->nr_stages++; tape->nr_pending_stages++; - spin_unlock_irqrestore(&tape->spinlock, flags); + spin_unlock_irqrestore(&tape->lock, flags); } /* @@ -1962,10 +1960,10 @@ static void idetape_wait_for_request (ide_drive_t *drive, struct request *rq) } rq->end_io_data = &wait; rq->end_io = blk_end_sync_rq; - spin_unlock_irq(&tape->spinlock); + spin_unlock_irq(&tape->lock); wait_for_completion(&wait); /* The stage and its struct request have been deallocated */ - spin_lock_irq(&tape->spinlock); + spin_lock_irq(&tape->lock); } static ide_startstop_t idetape_read_position_callback(ide_drive_t *drive) @@ -1991,7 +1989,7 @@ static ide_startstop_t idetape_read_position_callback(ide_drive_t *drive) be32_to_cpu(*(u32 *)&readpos[4])); tape->partition = readpos[1]; - tape->first_frame_position = + tape->first_frame = be32_to_cpu(*(u32 *)&readpos[4]); set_bit(IDETAPE_ADDRESS_VALID, &tape->flags); idetape_end_request(drive, 1, 0); @@ -2133,7 +2131,7 @@ static int idetape_read_position (ide_drive_t *drive) idetape_create_read_position_cmd(&pc); if (idetape_queue_pc_tail(drive, &pc)) return -1; - position = tape->first_frame_position; + position = tape->first_frame; return position; } @@ -2173,7 +2171,7 @@ static int __idetape_discard_read_pipeline (ide_drive_t *drive) return 0; /* Remove merge stage. */ - cnt = tape->merge_stage_size / tape->tape_block_size; + cnt = tape->merge_stage_size / tape->blk_size; if (test_and_clear_bit(IDETAPE_FILEMARK, &tape->flags)) ++cnt; /* Filemarks count as 1 sector */ tape->merge_stage_size = 0; @@ -2190,11 +2188,11 @@ static int __idetape_discard_read_pipeline (ide_drive_t *drive) if (tape->first_stage == NULL) return 0; - spin_lock_irqsave(&tape->spinlock, flags); + spin_lock_irqsave(&tape->lock, flags); tape->next_stage = NULL; if (idetape_pipeline_active(tape)) - idetape_wait_for_request(drive, tape->active_data_request); - spin_unlock_irqrestore(&tape->spinlock, flags); + idetape_wait_for_request(drive, tape->active_data_rq); + spin_unlock_irqrestore(&tape->lock, flags); while (tape->first_stage != NULL) { struct request *rq_ptr = &tape->first_stage->rq; @@ -2273,7 +2271,7 @@ static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int blocks, struct idetape_init_rq(&rq, cmd); rq.rq_disk = tape->disk; rq.special = (void *)bh; - rq.sector = tape->first_frame_position; + rq.sector = tape->first_frame; rq.nr_sectors = rq.current_nr_sectors = blocks; (void) ide_do_drive_cmd(drive, &rq, ide_wait); @@ -2284,7 +2282,7 @@ static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int blocks, struct idetape_init_merge_stage(tape); if (rq.errors == IDETAPE_ERROR_GENERAL) return -EIO; - return (tape->tape_block_size * (blocks-rq.current_nr_sectors)); + return (tape->blk_size * (blocks-rq.current_nr_sectors)); } /* @@ -2300,7 +2298,7 @@ static void idetape_insert_pipeline_into_queue (ide_drive_t *drive) if (!idetape_pipeline_active(tape)) { set_bit(IDETAPE_PIPELINE_ACTIVE, &tape->flags); idetape_activate_next_stage(drive); - (void) ide_do_drive_cmd(drive, tape->active_data_request, ide_end); + (void) ide_do_drive_cmd(drive, tape->active_data_rq, ide_end); } } @@ -2346,10 +2344,10 @@ static void idetape_wait_first_stage (ide_drive_t *drive) if (tape->first_stage == NULL) return; - spin_lock_irqsave(&tape->spinlock, flags); + spin_lock_irqsave(&tape->lock, flags); if (tape->active_stage == tape->first_stage) - idetape_wait_for_request(drive, tape->active_data_request); - spin_unlock_irqrestore(&tape->spinlock, flags); + idetape_wait_for_request(drive, tape->active_data_rq); + spin_unlock_irqrestore(&tape->lock, flags); } /* @@ -2377,12 +2375,12 @@ static int idetape_add_chrdev_write_request (ide_drive_t *drive, int blocks) * Pay special attention to possible race conditions. */ while ((new_stage = idetape_kmalloc_stage(tape)) == NULL) { - spin_lock_irqsave(&tape->spinlock, flags); + spin_lock_irqsave(&tape->lock, flags); if (idetape_pipeline_active(tape)) { - idetape_wait_for_request(drive, tape->active_data_request); - spin_unlock_irqrestore(&tape->spinlock, flags); + idetape_wait_for_request(drive, tape->active_data_rq); + spin_unlock_irqrestore(&tape->lock, flags); } else { - spin_unlock_irqrestore(&tape->spinlock, flags); + spin_unlock_irqrestore(&tape->lock, flags); idetape_insert_pipeline_into_queue(drive); if (idetape_pipeline_active(tape)) continue; @@ -2396,7 +2394,7 @@ static int idetape_add_chrdev_write_request (ide_drive_t *drive, int blocks) rq = &new_stage->rq; idetape_init_rq(rq, REQ_IDETAPE_WRITE); /* Doesn't actually matter - We always assume sequential access */ - rq->sector = tape->first_frame_position; + rq->sector = tape->first_frame; rq->nr_sectors = rq->current_nr_sectors = blocks; idetape_switch_buffers(tape, new_stage); @@ -2413,7 +2411,9 @@ static int idetape_add_chrdev_write_request (ide_drive_t *drive, int blocks) */ if (!idetape_pipeline_active(tape)) { if (tape->nr_stages >= tape->max_stages * 9 / 10 || - tape->nr_stages >= tape->max_stages - tape->uncontrolled_pipeline_head_speed * 3 * 1024 / tape->tape_block_size) { + tape->nr_stages >= tape->max_stages - + tape->uncontrolled_pipeline_head_speed * 3 * 1024 / + tape->blk_size) { tape->measure_insert_time = 1; tape->insert_time = jiffies; tape->insert_size = 0; @@ -2438,10 +2438,10 @@ static void idetape_wait_for_pipeline (ide_drive_t *drive) while (tape->next_stage || idetape_pipeline_active(tape)) { idetape_insert_pipeline_into_queue(drive); - spin_lock_irqsave(&tape->spinlock, flags); + spin_lock_irqsave(&tape->lock, flags); if (idetape_pipeline_active(tape)) - idetape_wait_for_request(drive, tape->active_data_request); - spin_unlock_irqrestore(&tape->spinlock, flags); + idetape_wait_for_request(drive, tape->active_data_rq); + spin_unlock_irqrestore(&tape->lock, flags); } } @@ -2460,12 +2460,13 @@ static void idetape_empty_write_pipeline (ide_drive_t *drive) tape->merge_stage_size = tape->stage_size; } if (tape->merge_stage_size) { - blocks = tape->merge_stage_size / tape->tape_block_size; - if (tape->merge_stage_size % tape->tape_block_size) { + blocks = tape->merge_stage_size / tape->blk_size; + if (tape->merge_stage_size % tape->blk_size) { unsigned int i; blocks++; - i = tape->tape_block_size - tape->merge_stage_size % tape->tape_block_size; + i = tape->blk_size - tape->merge_stage_size % + tape->blk_size; bh = tape->bh->b_reqnext; while (bh) { atomic_set(&bh->b_count, 0); @@ -2571,7 +2572,7 @@ static int idetape_initiate_read (ide_drive_t *drive, int max_stages) if (tape->restart_speed_control_req) idetape_restart_speed_control(drive); idetape_init_rq(&rq, REQ_IDETAPE_READ); - rq.sector = tape->first_frame_position; + rq.sector = tape->first_frame; rq.nr_sectors = rq.current_nr_sectors = blocks; if (!test_bit(IDETAPE_PIPELINE_ERROR, &tape->flags) && tape->nr_stages < max_stages) { @@ -2624,11 +2625,13 @@ static int idetape_add_chrdev_read_request (ide_drive_t *drive,int blocks) if (tape->first_stage == NULL) { if (test_bit(IDETAPE_PIPELINE_ERROR, &tape->flags)) return 0; - return idetape_queue_rw_tail(drive, REQ_IDETAPE_READ, blocks, tape->merge_stage->bh); + return idetape_queue_rw_tail(drive, REQ_IDETAPE_READ, blocks, + tape->merge_stage->bh); } idetape_wait_first_stage(drive); rq_ptr = &tape->first_stage->rq; - bytes_read = tape->tape_block_size * (rq_ptr->nr_sectors - rq_ptr->current_nr_sectors); + bytes_read = tape->blk_size * (rq_ptr->nr_sectors - + rq_ptr->current_nr_sectors); rq_ptr->nr_sectors = rq_ptr->current_nr_sectors = 0; @@ -2638,15 +2641,15 @@ static int idetape_add_chrdev_read_request (ide_drive_t *drive,int blocks) idetape_switch_buffers(tape, tape->first_stage); if (rq_ptr->errors == IDETAPE_ERROR_FILEMARK) set_bit(IDETAPE_FILEMARK, &tape->flags); - spin_lock_irqsave(&tape->spinlock, flags); + spin_lock_irqsave(&tape->lock, flags); idetape_remove_stage_head(drive); - spin_unlock_irqrestore(&tape->spinlock, flags); + spin_unlock_irqrestore(&tape->lock, flags); tape->pipeline_head++; idetape_calculate_speeds(drive); } - if (bytes_read > blocks * tape->tape_block_size) { + if (bytes_read > blocks * tape->blk_size) { printk(KERN_ERR "ide-tape: bug: trying to return more bytes than requested\n"); - bytes_read = blocks * tape->tape_block_size; + bytes_read = blocks * tape->blk_size; } return (bytes_read); } @@ -2663,7 +2666,7 @@ static void idetape_pad_zeros (ide_drive_t *drive, int bcount) bh = tape->merge_stage->bh; count = min(tape->stage_size, bcount); bcount -= count; - blocks = count / tape->tape_block_size; + blocks = count / tape->blk_size; while (count) { atomic_set(&bh->b_count, min(count, (unsigned int)bh->b_size)); memset(bh->b_data, 0, atomic_read(&bh->b_count)); @@ -2685,9 +2688,10 @@ static int idetape_pipeline_size (ide_drive_t *drive) stage = tape->first_stage; while (stage != NULL) { rq = &stage->rq; - size += tape->tape_block_size * (rq->nr_sectors-rq->current_nr_sectors); + size += tape->blk_size * (rq->nr_sectors - + rq->current_nr_sectors); if (rq->errors == IDETAPE_ERROR_FILEMARK) - size += tape->tape_block_size; + size += tape->blk_size; stage = stage->next; } size += tape->merge_stage_size; @@ -2744,11 +2748,11 @@ static int idetape_blkdev_ioctl(ide_drive_t *drive, unsigned int cmd, unsigned l case 0x0340: if (copy_from_user(&config, argp, sizeof(config))) return -EFAULT; - tape->best_dsc_rw_frequency = config.dsc_rw_frequency; + tape->best_dsc_rw_freq = config.dsc_rw_frequency; tape->max_stages = config.nr_stages; break; case 0x0350: - config.dsc_rw_frequency = (int) tape->best_dsc_rw_frequency; + config.dsc_rw_frequency = (int) tape->best_dsc_rw_freq; config.nr_stages = tape->max_stages; if (copy_to_user(argp, &config, sizeof(config))) return -EFAULT; @@ -2798,7 +2802,7 @@ static int idetape_space_over_filemarks (ide_drive_t *drive,short mt_op,int mt_c set_bit(IDETAPE_FILEMARK, &tape->flags); return 0; } - spin_lock_irqsave(&tape->spinlock, flags); + spin_lock_irqsave(&tape->lock, flags); if (tape->first_stage == tape->active_stage) { /* * We have reached the active stage in the read pipeline. @@ -2810,11 +2814,11 @@ static int idetape_space_over_filemarks (ide_drive_t *drive,short mt_op,int mt_c * __idetape_discard_read_pipeline(), for example. */ tape->next_stage = NULL; - spin_unlock_irqrestore(&tape->spinlock, flags); + spin_unlock_irqrestore(&tape->lock, flags); idetape_wait_first_stage(drive); tape->next_stage = tape->first_stage->next; } else - spin_unlock_irqrestore(&tape->spinlock, flags); + spin_unlock_irqrestore(&tape->lock, flags); if (tape->first_stage->rq.errors == IDETAPE_ERROR_FILEMARK) ++count; idetape_remove_stage_head(drive); @@ -2876,9 +2880,9 @@ static ssize_t idetape_chrdev_read (struct file *file, char __user *buf, if (tape->chrdev_dir != IDETAPE_DIR_READ) { if (test_bit(IDETAPE_DETECT_BS, &tape->flags)) - if (count > tape->tape_block_size && - (count % tape->tape_block_size) == 0) - tape->user_bs_factor = count / tape->tape_block_size; + if (count > tape->blk_size && + (count % tape->blk_size) == 0) + tape->user_bs_factor = count / tape->blk_size; } if ((rc = idetape_initiate_read(drive, tape->max_stages)) < 0) return rc; @@ -3115,9 +3119,11 @@ static int idetape_mtioctop(ide_drive_t *drive, short mt_op, int mt_count) return (idetape_queue_pc_tail(drive, &pc)); case MTSETBLK: if (mt_count) { - if (mt_count < tape->tape_block_size || mt_count % tape->tape_block_size) + if (mt_count < tape->blk_size || + mt_count % tape->blk_size) return -EIO; - tape->user_bs_factor = mt_count / tape->tape_block_size; + tape->user_bs_factor = mt_count / + tape->blk_size; clear_bit(IDETAPE_DETECT_BS, &tape->flags); } else set_bit(IDETAPE_DETECT_BS, &tape->flags); @@ -3164,7 +3170,7 @@ static int idetape_chrdev_ioctl(struct inode *inode, struct file *file, struct mtop mtop; struct mtget mtget; struct mtpos mtpos; - int block_offset = 0, position = tape->first_frame_position; + int block_offset = 0, position = tape->first_frame; void __user *argp = (void __user *)arg; debug_log(DBG_CHRDEV, "Enter %s, cmd=%u\n", __func__, cmd); @@ -3175,7 +3181,8 @@ static int idetape_chrdev_ioctl(struct inode *inode, struct file *file, idetape_flush_tape_buffers(drive); } if (cmd == MTIOCGET || cmd == MTIOCPOS) { - block_offset = idetape_pipeline_size(drive) / (tape->tape_block_size * tape->user_bs_factor); + block_offset = idetape_pipeline_size(drive) / + (tape->blk_size * tape->user_bs_factor); if ((position = idetape_read_position(drive)) < 0) return -EIO; } @@ -3188,7 +3195,10 @@ static int idetape_chrdev_ioctl(struct inode *inode, struct file *file, memset(&mtget, 0, sizeof (struct mtget)); mtget.mt_type = MT_ISSCSI2; mtget.mt_blkno = position / tape->user_bs_factor - block_offset; - mtget.mt_dsreg = ((tape->tape_block_size * tape->user_bs_factor) << MT_ST_BLKSIZE_SHIFT) & MT_ST_BLKSIZE_MASK; + mtget.mt_dsreg = + ((tape->blk_size * tape->user_bs_factor) + << MT_ST_BLKSIZE_SHIFT) & MT_ST_BLKSIZE_MASK; + if (tape->drv_write_prot) { mtget.mt_gstat |= GMT_WR_PROT(0xffffffff); } @@ -3219,14 +3229,14 @@ static void ide_tape_get_bsize_from_bdesc(ide_drive_t *drive) idetape_create_mode_sense_cmd(&pc, IDETAPE_BLOCK_DESCRIPTOR); if (idetape_queue_pc_tail(drive, &pc)) { printk(KERN_ERR "ide-tape: Can't get block descriptor\n"); - if (tape->tape_block_size == 0) { + if (tape->blk_size == 0) { printk(KERN_WARNING "ide-tape: Cannot deal with zero " "block size, assuming 32k\n"); - tape->tape_block_size = 32768; + tape->blk_size = 32768; } return; } - tape->tape_block_size = (pc.buffer[4 + 5] << 16) + + tape->blk_size = (pc.buffer[4 + 5] << 16) + (pc.buffer[4 + 6] << 8) + pc.buffer[4 + 7]; tape->drv_write_prot = (pc.buffer[2] & 0x80) >> 7; @@ -3328,7 +3338,8 @@ static void idetape_write_release (ide_drive_t *drive, unsigned int minor) idetape_empty_write_pipeline(drive); tape->merge_stage = __idetape_kmalloc_stage(tape, 1, 0); if (tape->merge_stage != NULL) { - idetape_pad_zeros(drive, tape->tape_block_size * (tape->user_bs_factor - 1)); + idetape_pad_zeros(drive, tape->blk_size * + (tape->user_bs_factor - 1)); __idetape_kfree_stage(tape->merge_stage); tape->merge_stage = NULL; } @@ -3456,7 +3467,7 @@ static void idetape_get_mode_sense_results (ide_drive_t *drive) if (idetape_queue_pc_tail(drive, &pc)) { printk(KERN_ERR "ide-tape: Can't get tape parameters - assuming" " some default values\n"); - tape->tape_block_size = 512; + tape->blk_size = 512; put_unaligned(52, (u16 *)&tape->caps[12]); put_unaligned(540, (u16 *)&tape->caps[14]); put_unaligned(6*52, (u16 *)&tape->caps[16]); @@ -3486,9 +3497,9 @@ static void idetape_get_mode_sense_results (ide_drive_t *drive) memcpy(&tape->caps, caps, 20); if (caps[7] & 0x02) - tape->tape_block_size = 512; + tape->blk_size = 512; else if (caps[7] & 0x04) - tape->tape_block_size = 1024; + tape->blk_size = 1024; } #ifdef CONFIG_IDE_PROC_FS @@ -3508,8 +3519,11 @@ static void idetape_add_settings (ide_drive_t *drive) ide_add_setting(drive, "pipeline_pending", SETTING_READ, TYPE_INT, 0, 0xffff, tape->stage_size / 1024, 1, &tape->nr_pending_stages, NULL); ide_add_setting(drive, "speed", SETTING_READ, TYPE_SHORT, 0, 0xffff, 1, 1, (u16 *)&tape->caps[14], NULL); - ide_add_setting(drive, "stage", SETTING_READ, TYPE_INT, 0, 0xffff, 1, 1024, &tape->stage_size, NULL); - ide_add_setting(drive, "tdsc", SETTING_RW, TYPE_INT, IDETAPE_DSC_RW_MIN, IDETAPE_DSC_RW_MAX, 1000, HZ, &tape->best_dsc_rw_frequency, NULL); + ide_add_setting(drive, "stage", SETTING_READ, TYPE_INT, 0, 0xffff, 1, + 1024, &tape->stage_size, NULL); + ide_add_setting(drive, "tdsc", SETTING_RW, TYPE_INT, IDETAPE_DSC_RW_MIN, + IDETAPE_DSC_RW_MAX, 1000, HZ, &tape->best_dsc_rw_freq, + NULL); ide_add_setting(drive, "dsc_overlap", SETTING_RW, TYPE_BYTE, 0, 1, 1, 1, &drive->dsc_overlap, NULL); ide_add_setting(drive, "pipeline_head_speed_c",SETTING_READ, TYPE_INT, 0, 0xffff, 1, 1, &tape->controlled_pipeline_head_speed, NULL); ide_add_setting(drive, "pipeline_head_speed_u",SETTING_READ, TYPE_INT, 0, 0xffff, 1, 1, &tape->uncontrolled_pipeline_head_speed,NULL); @@ -3542,7 +3556,7 @@ static void idetape_setup (ide_drive_t *drive, idetape_tape_t *tape, int minor) struct sysinfo si; u16 *ctl = (u16 *)&tape->caps[12]; - spin_lock_init(&tape->spinlock); + spin_lock_init(&tape->lock); drive->dsc_overlap = 1; if (drive->hwif->host_flags & IDE_HFLAG_NO_DSC) { printk(KERN_INFO "ide-tape: %s: disabling DSC overlap\n", @@ -3570,11 +3584,11 @@ static void idetape_setup (ide_drive_t *drive, idetape_tape_t *tape, int minor) idetape_get_mode_sense_results(drive); ide_tape_get_bsize_from_bdesc(drive); tape->user_bs_factor = 1; - tape->stage_size = *ctl * tape->tape_block_size; + tape->stage_size = *ctl * tape->blk_size; while (tape->stage_size > 0xffff) { printk(KERN_NOTICE "ide-tape: decreasing stage size\n"); *ctl /= 2; - tape->stage_size = *ctl * tape->tape_block_size; + tape->stage_size = *ctl * tape->blk_size; } stage_size = tape->stage_size; tape->pages_per_stage = stage_size / PAGE_SIZE; @@ -3613,14 +3627,16 @@ static void idetape_setup (ide_drive_t *drive, idetape_tape_t *tape, int minor) * Ensure that the number we got makes sense; limit * it within IDETAPE_DSC_RW_MIN and IDETAPE_DSC_RW_MAX. */ - tape->best_dsc_rw_frequency = max_t(unsigned long, min_t(unsigned long, t, IDETAPE_DSC_RW_MAX), IDETAPE_DSC_RW_MIN); + tape->best_dsc_rw_freq = max_t(unsigned long, + min_t(unsigned long, t, IDETAPE_DSC_RW_MAX), + IDETAPE_DSC_RW_MIN); printk(KERN_INFO "ide-tape: %s <-> %s: %dKBps, %d*%dkB buffer, " "%dkB pipeline, %lums tDSC%s\n", drive->name, tape->name, *(u16 *)&tape->caps[14], (*(u16 *)&tape->caps[16] * 512) / tape->stage_size, tape->stage_size / 1024, tape->max_stages * tape->stage_size / 1024, - tape->best_dsc_rw_frequency * 1000 / HZ, + tape->best_dsc_rw_freq * 1000 / HZ, drive->using_dma ? ", DMA":""); idetape_add_settings(drive); -- cgit v1.2.3 From 97219851b92fd083539003bca48c379d415566ac Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Wed, 6 Feb 2008 02:57:52 +0100 Subject: ide-tape: remove idetape_increase_max_pipeline_stages() This function was being used only at one place so fold it in there. Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-tape.c | 35 +++++++++++++++-------------------- 1 file changed, 15 insertions(+), 20 deletions(-) (limited to 'drivers/ide/ide-tape.c') diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 2fe4e8fdf3da..27fd33db0a0b 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -809,25 +809,6 @@ static void idetape_activate_next_stage(ide_drive_t *drive) tape->next_stage = stage->next; } -/* - * idetape_increase_max_pipeline_stages is a part of the feedback - * loop which tries to find the optimum number of stages. In the - * feedback loop, we are starting from a minimum maximum number of - * stages, and if we sense that the pipeline is empty, we try to - * increase it, until we reach the user compile time memory limit. - */ -static void idetape_increase_max_pipeline_stages (ide_drive_t *drive) -{ - idetape_tape_t *tape = drive->driver_data; - int increase = (tape->max_pipeline - tape->min_pipeline) / 10; - - debug_log(DBG_PROCS, "Enter %s\n", __func__); - - tape->max_stages += max(increase, 1); - tape->max_stages = max(tape->max_stages, tape->min_pipeline); - tape->max_stages = min(tape->max_stages, tape->max_pipeline); -} - /* * idetape_kfree_stage calls kfree to completely free a stage, along with * its related buffers. @@ -976,7 +957,21 @@ static int idetape_end_request(ide_drive_t *drive, int uptodate, int nr_sects) (void)ide_do_drive_cmd(drive, tape->active_data_rq, ide_end); } else if (!error) { - idetape_increase_max_pipeline_stages(drive); + /* + * This is a part of the feedback loop which tries to + * find the optimum number of stages. We are starting + * from a minimum maximum number of stages, and if we + * sense that the pipeline is empty, we try to increase + * it, until we reach the user compile time memory + * limit. + */ + int i = (tape->max_pipeline - tape->min_pipeline) / 10; + + tape->max_stages += max(i, 1); + tape->max_stages = max(tape->max_stages, + tape->min_pipeline); + tape->max_stages = min(tape->max_stages, + tape->max_pipeline); } } ide_end_drive_cmd(drive, 0, 0); -- cgit v1.2.3 From 8d06bfadb44bfec067603fbc8ee2faced3b13ad9 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Wed, 6 Feb 2008 02:57:53 +0100 Subject: ide-tape: shorten some function names Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-tape.c | 32 +++++++++++++++----------------- 1 file changed, 15 insertions(+), 17 deletions(-) (limited to 'drivers/ide/ide-tape.c') diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 27fd33db0a0b..bdf02fcc1a25 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -1090,7 +1090,7 @@ typedef void idetape_io_buf(ide_drive_t *, idetape_pc_t *, unsigned int); * command. We will transfer some of the data (as requested by the drive) and * will re-point interrupt handler to us. When data transfer is finished, we * will act according to the algorithm described before - * idetape_issue_packet_command. + * idetape_issue_pc. */ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive) { @@ -1267,7 +1267,7 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive) * * The handling will be done in three stages: * - * 1. idetape_issue_packet_command will send the packet command to the + * 1. idetape_issue_pc will send the packet command to the * drive, and will set the interrupt handler to idetape_pc_intr. * * 2. On each interrupt, idetape_pc_intr will be called. This step @@ -1342,7 +1342,7 @@ static ide_startstop_t idetape_transfer_pc(ide_drive_t *drive) return ide_started; } -static ide_startstop_t idetape_issue_packet_command (ide_drive_t *drive, idetape_pc_t *pc) +static ide_startstop_t idetape_issue_pc(ide_drive_t *drive, idetape_pc_t *pc) { ide_hwif_t *hwif = drive->hwif; idetape_tape_t *tape = drive->driver_data; @@ -1649,7 +1649,7 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive, */ if (tape->failed_pc != NULL && tape->pc->c[0] == REQUEST_SENSE) { - return idetape_issue_packet_command(drive, tape->failed_pc); + return idetape_issue_pc(drive, tape->failed_pc); } if (postponed_rq != NULL) if (rq != postponed_rq) { @@ -1730,7 +1730,7 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive, } BUG(); out: - return idetape_issue_packet_command(drive, pc); + return idetape_issue_pc(drive, pc); } /* @@ -2280,11 +2280,8 @@ static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int blocks, struct return (tape->blk_size * (blocks-rq.current_nr_sectors)); } -/* - * idetape_insert_pipeline_into_queue is used to start servicing the - * pipeline stages, starting from tape->next_stage. - */ -static void idetape_insert_pipeline_into_queue (ide_drive_t *drive) +/* start servicing the pipeline stages, starting from tape->next_stage. */ +static void idetape_plug_pipeline(ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; @@ -2376,7 +2373,7 @@ static int idetape_add_chrdev_write_request (ide_drive_t *drive, int blocks) spin_unlock_irqrestore(&tape->lock, flags); } else { spin_unlock_irqrestore(&tape->lock, flags); - idetape_insert_pipeline_into_queue(drive); + idetape_plug_pipeline(drive); if (idetape_pipeline_active(tape)) continue; /* @@ -2413,7 +2410,7 @@ static int idetape_add_chrdev_write_request (ide_drive_t *drive, int blocks) tape->insert_time = jiffies; tape->insert_size = 0; tape->insert_speed = 0; - idetape_insert_pipeline_into_queue(drive); + idetape_plug_pipeline(drive); } } if (test_and_clear_bit(IDETAPE_PIPELINE_ERROR, &tape->flags)) @@ -2432,7 +2429,7 @@ static void idetape_wait_for_pipeline (ide_drive_t *drive) unsigned long flags; while (tape->next_stage || idetape_pipeline_active(tape)) { - idetape_insert_pipeline_into_queue(drive); + idetape_plug_pipeline(drive); spin_lock_irqsave(&tape->lock, flags); if (idetape_pipeline_active(tape)) idetape_wait_for_request(drive, tape->active_data_rq); @@ -2525,7 +2522,7 @@ static void idetape_restart_speed_control (ide_drive_t *drive) tape->controlled_previous_head_time = tape->uncontrolled_previous_head_time = jiffies; } -static int idetape_initiate_read (ide_drive_t *drive, int max_stages) +static int idetape_init_read(ide_drive_t *drive, int max_stages) { idetape_tape_t *tape = drive->driver_data; idetape_stage_t *new_stage; @@ -2586,7 +2583,7 @@ static int idetape_initiate_read (ide_drive_t *drive, int max_stages) tape->insert_time = jiffies; tape->insert_size = 0; tape->insert_speed = 0; - idetape_insert_pipeline_into_queue(drive); + idetape_plug_pipeline(drive); } } return 0; @@ -2616,7 +2613,7 @@ static int idetape_add_chrdev_read_request (ide_drive_t *drive,int blocks) * Wait for the next block to be available at the head * of the pipeline */ - idetape_initiate_read(drive, tape->max_stages); + idetape_init_read(drive, tape->max_stages); if (tape->first_stage == NULL) { if (test_bit(IDETAPE_PIPELINE_ERROR, &tape->flags)) return 0; @@ -2879,7 +2876,8 @@ static ssize_t idetape_chrdev_read (struct file *file, char __user *buf, (count % tape->blk_size) == 0) tape->user_bs_factor = count / tape->blk_size; } - if ((rc = idetape_initiate_read(drive, tape->max_stages)) < 0) + rc = idetape_init_read(drive, tape->max_stages); + if (rc < 0) return rc; if (count == 0) return (0); -- cgit v1.2.3 From 3c98bf347d95cf9c43104db2fda848d0c7decebd Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Wed, 6 Feb 2008 02:57:53 +0100 Subject: ide-tape: cleanup and fix comments Also, remove redundant ones and cleanup whitespace. Bart: - minor fixups Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-tape.c | 681 ++++++++++++++++++++----------------------------- 1 file changed, 271 insertions(+), 410 deletions(-) (limited to 'drivers/ide/ide-tape.c') diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index bdf02fcc1a25..d8b02fb0284c 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -75,37 +75,34 @@ enum { /* - * Pipelined mode parameters. + * Pipelined mode parameters. * - * We try to use the minimum number of stages which is enough to - * keep the tape constantly streaming. To accomplish that, we implement - * a feedback loop around the maximum number of stages: + * We try to use the minimum number of stages which is enough to keep the tape + * constantly streaming. To accomplish that, we implement a feedback loop around + * the maximum number of stages: * - * We start from MIN maximum stages (we will not even use MIN stages - * if we don't need them), increment it by RATE*(MAX-MIN) - * whenever we sense that the pipeline is empty, until we reach - * the optimum value or until we reach MAX. + * We start from MIN maximum stages (we will not even use MIN stages if we don't + * need them), increment it by RATE*(MAX-MIN) whenever we sense that the + * pipeline is empty, until we reach the optimum value or until we reach MAX. * - * Setting the following parameter to 0 is illegal: the pipelined mode - * cannot be disabled (idetape_calculate_speeds() divides by - * tape->max_stages.) + * Setting the following parameter to 0 is illegal: the pipelined mode cannot be + * disabled (idetape_calculate_speeds() divides by tape->max_stages.) */ #define IDETAPE_MIN_PIPELINE_STAGES 1 #define IDETAPE_MAX_PIPELINE_STAGES 400 #define IDETAPE_INCREASE_STAGES_RATE 20 /* - * After each failed packet command we issue a request sense command - * and retry the packet command IDETAPE_MAX_PC_RETRIES times. + * After each failed packet command we issue a request sense command and retry + * the packet command IDETAPE_MAX_PC_RETRIES times. * - * Setting IDETAPE_MAX_PC_RETRIES to 0 will disable retries. + * Setting IDETAPE_MAX_PC_RETRIES to 0 will disable retries. */ #define IDETAPE_MAX_PC_RETRIES 3 /* - * With each packet command, we allocate a buffer of - * IDETAPE_PC_BUFFER_SIZE bytes. This is used for several packet - * commands (Not for READ/WRITE commands). + * With each packet command, we allocate a buffer of IDETAPE_PC_BUFFER_SIZE + * bytes. This is used for several packet commands (Not for READ/WRITE commands) */ #define IDETAPE_PC_BUFFER_SIZE 256 @@ -124,48 +121,39 @@ enum { #define IDETAPE_WAIT_CMD (900*HZ) /* - * The following parameter is used to select the point in the internal - * tape fifo in which we will start to refill the buffer. Decreasing - * the following parameter will improve the system's latency and - * interactive response, while using a high value might improve system - * throughput. + * The following parameter is used to select the point in the internal tape fifo + * in which we will start to refill the buffer. Decreasing the following + * parameter will improve the system's latency and interactive response, while + * using a high value might improve system throughput. */ -#define IDETAPE_FIFO_THRESHOLD 2 +#define IDETAPE_FIFO_THRESHOLD 2 /* - * DSC polling parameters. + * DSC polling parameters. * - * Polling for DSC (a single bit in the status register) is a very - * important function in ide-tape. There are two cases in which we - * poll for DSC: + * Polling for DSC (a single bit in the status register) is a very important + * function in ide-tape. There are two cases in which we poll for DSC: * - * 1. Before a read/write packet command, to ensure that we - * can transfer data from/to the tape's data buffers, without - * causing an actual media access. In case the tape is not - * ready yet, we take out our request from the device - * request queue, so that ide.c will service requests from - * the other device on the same interface meanwhile. + * 1. Before a read/write packet command, to ensure that we can transfer data + * from/to the tape's data buffers, without causing an actual media access. + * In case the tape is not ready yet, we take out our request from the device + * request queue, so that ide.c could service requests from the other device + * on the same interface in the meantime. * - * 2. After the successful initialization of a "media access - * packet command", which is a command which can take a long - * time to complete (it can be several seconds or even an hour). + * 2. After the successful initialization of a "media access packet command", + * which is a command that can take a long time to complete (the interval can + * range from several seconds to even an hour). Again, we postpone our request + * in the middle to free the bus for the other device. The polling frequency + * here should be lower than the read/write frequency since those media access + * commands are slow. We start from a "fast" frequency - IDETAPE_DSC_MA_FAST + * (1 second), and if we don't receive DSC after IDETAPE_DSC_MA_THRESHOLD + * (5 min), we switch it to a lower frequency - IDETAPE_DSC_MA_SLOW (1 min). * - * Again, we postpone our request in the middle to free the bus - * for the other device. The polling frequency here should be - * lower than the read/write frequency since those media access - * commands are slow. We start from a "fast" frequency - - * IDETAPE_DSC_MA_FAST (one second), and if we don't receive DSC - * after IDETAPE_DSC_MA_THRESHOLD (5 minutes), we switch it to a - * lower frequency - IDETAPE_DSC_MA_SLOW (1 minute). - * - * We also set a timeout for the timer, in case something goes wrong. - * The timeout should be longer then the maximum execution time of a - * tape operation. - */ - -/* - * DSC timings. + * We also set a timeout for the timer, in case something goes wrong. The + * timeout should be longer then the maximum execution time of a tape operation. */ + +/* DSC timings. */ #define IDETAPE_DSC_RW_MIN 5*HZ/100 /* 50 msec */ #define IDETAPE_DSC_RW_MAX 40*HZ/100 /* 400 msec */ #define IDETAPE_DSC_RW_TIMEOUT 2*60*HZ /* 2 minutes */ @@ -176,15 +164,9 @@ enum { /*************************** End of tunable parameters ***********************/ -/* - * Read/Write error simulation - */ +/* Read/Write error simulation */ #define SIMULATE_ERRORS 0 -/* - * For general magnetic tape device compatibility. - */ - /* tape directions */ enum { IDETAPE_DIR_NONE = (1 << 0), @@ -199,24 +181,32 @@ struct idetape_bh { char *b_data; }; -/* - * Our view of a packet command. - */ typedef struct idetape_packet_command_s { - u8 c[12]; /* Actual packet bytes */ - int retries; /* On each retry, we increment retries */ - int error; /* Error code */ - int request_transfer; /* Bytes to transfer */ - int actually_transferred; /* Bytes actually transferred */ - int buffer_size; /* Size of our data buffer */ + /* Actual packet bytes */ + u8 c[12]; + /* On each retry, we increment retries */ + int retries; + /* Error code */ + int error; + /* Bytes to transfer */ + int request_transfer; + /* Bytes actually transferred */ + int actually_transferred; + /* Size of our data buffer */ + int buffer_size; struct idetape_bh *bh; char *b_data; int b_count; - u8 *buffer; /* Data buffer */ - u8 *current_position; /* Pointer into the above buffer */ - ide_startstop_t (*callback) (ide_drive_t *); /* Called when this packet command is completed */ - u8 pc_buffer[IDETAPE_PC_BUFFER_SIZE]; /* Temporary buffer */ - unsigned long flags; /* Status/Action bit flags: long for set_bit */ + /* Data buffer */ + u8 *buffer; + /* Pointer into the above buffer */ + u8 *current_position; + /* Called when this packet command is completed */ + ide_startstop_t (*callback) (ide_drive_t *); + /* Temporary buffer */ + u8 pc_buffer[IDETAPE_PC_BUFFER_SIZE]; + /* Status/Action bit flags: long for set_bit */ + unsigned long flags; } idetape_pc_t; /* @@ -235,9 +225,7 @@ typedef struct idetape_packet_command_s { /* Data direction */ #define PC_WRITING 5 -/* - * A pipeline stage. - */ +/* A pipeline stage. */ typedef struct idetape_stage_s { struct request rq; /* The corresponding request */ struct idetape_bh *bh; /* The data buffers */ @@ -245,9 +233,8 @@ typedef struct idetape_stage_s { } idetape_stage_t; /* - * Most of our global data which we need to save even as we leave the - * driver due to an interrupt or a timer event is stored in a variable - * of type idetape_tape_t, defined below. + * Most of our global data which we need to save even as we leave the driver due + * to an interrupt or a timer event is stored in the struct defined below. */ typedef struct ide_tape_obj { ide_drive_t *drive; @@ -283,15 +270,14 @@ typedef struct ide_tape_obj { int rq_stack_index; /* - * DSC polling variables. + * DSC polling variables. * - * While polling for DSC we use postponed_rq to postpone the - * current request so that ide.c will be able to service - * pending requests on the other device. Note that at most - * we will have only one DSC (usually data transfer) request - * in the device request queue. Additional requests can be - * queued in our internal pipeline, but they will be visible - * to ide.c only one at a time. + * While polling for DSC we use postponed_rq to postpone the current + * request so that ide.c will be able to service pending requests on the + * other device. Note that at most we will have only one DSC (usually + * data transfer) request in the device request queue. Additional + * requests can be queued in our internal pipeline, but they will be + * visible to ide.c only one at a time. */ struct request *postponed_rq; /* The time in which we started polling for DSC */ @@ -303,21 +289,15 @@ typedef struct ide_tape_obj { unsigned long dsc_poll_freq; unsigned long dsc_timeout; - /* - * Read position information - */ + /* Read position information */ u8 partition; /* Current block */ unsigned int first_frame; - /* - * Last error information - */ + /* Last error information */ u8 sense_key, asc, ascq; - /* - * Character device operation - */ + /* Character device operation */ unsigned int minor; /* device name */ char name[4]; @@ -332,33 +312,30 @@ typedef struct ide_tape_obj { u8 caps[20]; /* - * Active data transfer request parameters. - * - * At most, there is only one ide-tape originated data transfer - * request in the device request queue. This allows ide.c to - * easily service requests from the other device when we - * postpone our active request. In the pipelined operation - * mode, we use our internal pipeline structure to hold - * more data requests. + * Active data transfer request parameters. * - * The data buffer size is chosen based on the tape's - * recommendation. + * At most, there is only one ide-tape originated data transfer request + * in the device request queue. This allows ide.c to easily service + * requests from the other device when we postpone our active request. + * In the pipelined operation mode, we use our internal pipeline + * structure to hold more data requests. The data buffer size is chosen + * based on the tape's recommendation. */ - /* Ptr to the request which is waiting in the device request queue */ + /* ptr to the request which is waiting in the device request queue */ struct request *active_data_rq; - /* Data buffer size (chosen based on the tape's recommendation */ + /* Data buffer size chosen based on the tape's recommendation */ int stage_size; idetape_stage_t *merge_stage; int merge_stage_size; struct idetape_bh *bh; char *b_data; int b_count; - + /* - * Pipeline parameters. + * Pipeline parameters. * - * To accomplish non-pipelined mode, we simply set the following - * variables to zero (or NULL, where appropriate). + * To accomplish non-pipelined mode, we simply set the following + * variables to zero (or NULL, where appropriate). */ /* Number of currently used stages */ int nr_stages; @@ -385,9 +362,7 @@ typedef struct ide_tape_obj { /* protects the ide-tape queue */ spinlock_t lock; - /* - * Measures average tape speed - */ + /* Measures average tape speed */ unsigned long avg_time; int avg_size; int avg_speed; @@ -400,11 +375,9 @@ typedef struct ide_tape_obj { char write_prot; /* - * Limit the number of times a request can - * be postponed, to avoid an infinite postpone - * deadlock. + * Limit the number of times a request can be postponed, to avoid an + * infinite postpone deadlock. */ - /* request postpone count limit */ int postpone_cnt; /* @@ -419,18 +392,14 @@ typedef struct ide_tape_obj { int tape_head; int last_tape_head; - /* - * Speed control at the tape buffers input/output - */ + /* Speed control at the tape buffers input/output */ unsigned long insert_time; int insert_size; int insert_speed; int max_insert_speed; int measure_insert_time; - /* - * Speed regulation negative feedback loop - */ + /* Speed regulation negative feedback loop */ int speed_control; int pipeline_head_speed; int controlled_pipeline_head_speed; @@ -477,9 +446,7 @@ static void ide_tape_put(struct ide_tape_obj *tape) mutex_unlock(&idetape_ref_mutex); } -/* - * Tape door status - */ +/* Tape door status */ #define DOOR_UNLOCKED 0 #define DOOR_LOCKED 1 #define DOOR_EXPLICITLY_LOCKED 2 @@ -499,30 +466,23 @@ static void ide_tape_put(struct ide_tape_obj *tape) /* 0 = no tape is loaded, so we don't rewind after ejecting */ #define IDETAPE_MEDIUM_PRESENT 9 -/* - * Some defines for the READ BUFFER command - */ +/* A define for the READ BUFFER command */ #define IDETAPE_RETRIEVE_FAULTY_BLOCK 6 -/* - * Some defines for the SPACE command - */ +/* Some defines for the SPACE command */ #define IDETAPE_SPACE_OVER_FILEMARK 1 #define IDETAPE_SPACE_TO_EOD 3 -/* - * Some defines for the LOAD UNLOAD command - */ +/* Some defines for the LOAD UNLOAD command */ #define IDETAPE_LU_LOAD_MASK 1 #define IDETAPE_LU_RETENSION_MASK 2 #define IDETAPE_LU_EOT_MASK 4 /* - * Special requests for our block device strategy routine. + * Special requests for our block device strategy routine. * - * In order to service a character device command, we add special - * requests to the tail of our block device request queue and wait - * for their completion. + * In order to service a character device command, we add special requests to + * the tail of our block device request queue and wait for their completion. */ enum { @@ -533,10 +493,7 @@ enum { REQ_IDETAPE_READ_BUFFER = (1 << 4), }; -/* - * Error codes which are returned in rq->errors to the higher part - * of the driver. - */ +/* Error codes returned in rq->errors to the higher part of the driver. */ #define IDETAPE_ERROR_GENERAL 101 #define IDETAPE_ERROR_FILEMARK 102 #define IDETAPE_ERROR_EOD 103 @@ -560,8 +517,8 @@ struct idetape_id_gcw { #define IDETAPE_CAPABILITIES_PAGE 0x2a /* - * The variables below are used for the character device interface. - * Additional state variables are defined in our ide_drive_t structure. + * The variables below are used for the character device interface. Additional + * state variables are defined in our ide_drive_t structure. */ static struct ide_tape_obj * idetape_devs[MAX_HWIFS * MAX_DRIVES]; @@ -579,10 +536,6 @@ static struct ide_tape_obj *ide_tape_chrdev_get(unsigned int i) return tape; } -/* - * Function declarations - * - */ static int idetape_chrdev_release (struct inode *inode, struct file *filp); static void idetape_write_release (ide_drive_t *drive, unsigned int minor); @@ -711,9 +664,6 @@ static struct request *idetape_next_rq_storage (ide_drive_t *drive) return (&tape->rq_stack[tape->rq_stack_index++]); } -/* - * idetape_init_pc initializes a packet command. - */ static void idetape_init_pc (idetape_pc_t *pc) { memset(pc->c, 0, 12); @@ -809,10 +759,7 @@ static void idetape_activate_next_stage(ide_drive_t *drive) tape->next_stage = stage->next; } -/* - * idetape_kfree_stage calls kfree to completely free a stage, along with - * its related buffers. - */ +/* Free a stage along with its related buffers completely. */ static void __idetape_kfree_stage (idetape_stage_t *stage) { struct idetape_bh *prev_bh, *bh = stage->bh; @@ -840,8 +787,8 @@ static void idetape_kfree_stage (idetape_tape_t *tape, idetape_stage_t *stage) } /* - * idetape_remove_stage_head removes tape->first_stage from the pipeline. - * The caller should avoid race conditions. + * Remove tape->first_stage from the pipeline. The caller should avoid race + * conditions. */ static void idetape_remove_stage_head (ide_drive_t *drive) { @@ -899,8 +846,8 @@ static void idetape_abort_pipeline(ide_drive_t *drive, } /* - * idetape_end_request is used to finish servicing a request, and to - * insert a pending pipeline request into the main device queue. + * Finish servicing a request and insert a pending pipeline request into the + * main device queue. */ static int idetape_end_request(ide_drive_t *drive, int uptodate, int nr_sects) { @@ -951,9 +898,7 @@ static int idetape_end_request(ide_drive_t *drive, int uptodate, int nr_sects) if (tape->next_stage != NULL) { idetape_activate_next_stage(drive); - /* - * Insert the next request into the request queue. - */ + /* Insert the next request into the request queue. */ (void)ide_do_drive_cmd(drive, tape->active_data_rq, ide_end); } else if (!error) { @@ -1020,23 +965,19 @@ static void idetape_init_rq(struct request *rq, u8 cmd) } /* - * idetape_queue_pc_head generates a new packet command request in front - * of the request queue, before the current request, so that it will be - * processed immediately, on the next pass through the driver. - * - * idetape_queue_pc_head is called from the request handling part of - * the driver (the "bottom" part). Safe storage for the request should - * be allocated with idetape_next_pc_storage and idetape_next_rq_storage - * before calling idetape_queue_pc_head. + * Generate a new packet command request in front of the request queue, before + * the current request, so that it will be processed immediately, on the next + * pass through the driver. The function below is called from the request + * handling part of the driver (the "bottom" part). Safe storage for the request + * should be allocated with ide_tape_next_{pc,rq}_storage() prior to that. * - * Memory for those requests is pre-allocated at initialization time, and - * is limited to IDETAPE_PC_STACK requests. We assume that we have enough - * space for the maximum possible number of inter-dependent packet commands. + * Memory for those requests is pre-allocated at initialization time, and is + * limited to IDETAPE_PC_STACK requests. We assume that we have enough space for + * the maximum possible number of inter-dependent packet commands. * - * The higher level of the driver - The ioctl handler and the character - * device handling functions should queue request to the lower level part - * and wait for their completion using idetape_queue_pc_tail or - * idetape_queue_rw_tail. + * The higher level of the driver - The ioctl handler and the character device + * handling functions should queue request to the lower level part and wait for + * their completion using idetape_queue_pc_tail or idetape_queue_rw_tail. */ static void idetape_queue_pc_head (ide_drive_t *drive, idetape_pc_t *pc,struct request *rq) { @@ -1069,9 +1010,8 @@ static ide_startstop_t idetape_retry_pc (ide_drive_t *drive) } /* - * idetape_postpone_request postpones the current request so that - * ide.c will be able to service requests from another device on - * the same hwgroup while we are polling for DSC. + * Postpone the current request so that ide.c will be able to service requests + * from another device on the same hwgroup while we are polling for DSC. */ static void idetape_postpone_request (ide_drive_t *drive) { @@ -1258,46 +1198,40 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive) } /* - * Packet Command Interface + * Packet Command Interface * - * The current Packet Command is available in tape->pc, and will not - * change until we finish handling it. Each packet command is associated - * with a callback function that will be called when the command is - * finished. + * The current Packet Command is available in tape->pc, and will not change + * until we finish handling it. Each packet command is associated with a + * callback function that will be called when the command is finished. * - * The handling will be done in three stages: + * The handling will be done in three stages: * - * 1. idetape_issue_pc will send the packet command to the - * drive, and will set the interrupt handler to idetape_pc_intr. + * 1. idetape_issue_pc will send the packet command to the drive, and will set + * the interrupt handler to idetape_pc_intr. * - * 2. On each interrupt, idetape_pc_intr will be called. This step - * will be repeated until the device signals us that no more - * interrupts will be issued. + * 2. On each interrupt, idetape_pc_intr will be called. This step will be + * repeated until the device signals us that no more interrupts will be issued. * - * 3. ATAPI Tape media access commands have immediate status with a - * delayed process. In case of a successful initiation of a - * media access packet command, the DSC bit will be set when the - * actual execution of the command is finished. - * Since the tape drive will not issue an interrupt, we have to - * poll for this event. In this case, we define the request as - * "low priority request" by setting rq_status to - * IDETAPE_RQ_POSTPONED, set a timer to poll for DSC and exit - * the driver. + * 3. ATAPI Tape media access commands have immediate status with a delayed + * process. In case of a successful initiation of a media access packet command, + * the DSC bit will be set when the actual execution of the command is finished. + * Since the tape drive will not issue an interrupt, we have to poll for this + * event. In this case, we define the request as "low priority request" by + * setting rq_status to IDETAPE_RQ_POSTPONED, set a timer to poll for DSC and + * exit the driver. * - * ide.c will then give higher priority to requests which - * originate from the other device, until will change rq_status - * to RQ_ACTIVE. + * ide.c will then give higher priority to requests which originate from the + * other device, until will change rq_status to RQ_ACTIVE. * - * 4. When the packet command is finished, it will be checked for errors. + * 4. When the packet command is finished, it will be checked for errors. * - * 5. In case an error was found, we queue a request sense packet - * command in front of the request queue and retry the operation - * up to IDETAPE_MAX_PC_RETRIES times. - * - * 6. In case no error was found, or we decided to give up and not - * to retry again, the callback function will be called and then - * we will handle the next request. + * 5. In case an error was found, we queue a request sense packet command in + * front of the request queue and retry the operation up to + * IDETAPE_MAX_PC_RETRIES times. * + * 6. In case no error was found, or we decided to give up and not to retry + * again, the callback function will be called and then we will handle the next + * request. */ static ide_startstop_t idetape_transfer_pc(ide_drive_t *drive) { @@ -1363,9 +1297,9 @@ static ide_startstop_t idetape_issue_pc(ide_drive_t *drive, idetape_pc_t *pc) if (pc->retries > IDETAPE_MAX_PC_RETRIES || test_bit(PC_ABORT, &pc->flags)) { /* - * We will "abort" retrying a packet command in case - * a legitimate error code was received (crossing a - * filemark, or end of the media, for example). + * We will "abort" retrying a packet command in case legitimate + * error code was received (crossing a filemark, or end of the + * media, for example). */ if (!test_bit(PC_ABORT, &pc->flags)) { if (!(pc->c[0] == TEST_UNIT_READY && @@ -1416,9 +1350,6 @@ static ide_startstop_t idetape_issue_pc(ide_drive_t *drive, idetape_pc_t *pc) } } -/* - * General packet command callback function. - */ static ide_startstop_t idetape_pc_callback (ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; @@ -1429,15 +1360,14 @@ static ide_startstop_t idetape_pc_callback (ide_drive_t *drive) return ide_stopped; } -/* - * A mode sense command is used to "sense" tape parameters. - */ +/* A mode sense command is used to "sense" tape parameters. */ static void idetape_create_mode_sense_cmd (idetape_pc_t *pc, u8 page_code) { idetape_init_pc(pc); pc->c[0] = MODE_SENSE; if (page_code != IDETAPE_BLOCK_DESCRIPTOR) - pc->c[1] = 8; /* DBD = 1 - Don't return block descriptors */ + /* DBD = 1 - Don't return block descriptors */ + pc->c[1] = 8; pc->c[2] = page_code; /* * Changed pc->c[3] to 0 (255 will at best return unused info). @@ -1447,7 +1377,8 @@ static void idetape_create_mode_sense_cmd (idetape_pc_t *pc, u8 page_code) * and return an error when 255 is used. */ pc->c[3] = 0; - pc->c[4] = 255; /* (We will just discard data in that case) */ + /* We will just discard data in that case */ + pc->c[4] = 255; if (page_code == IDETAPE_BLOCK_DESCRIPTOR) pc->request_transfer = 12; else if (page_code == IDETAPE_CAPABILITIES_PAGE) @@ -1619,9 +1550,6 @@ static void idetape_create_write_cmd(idetape_tape_t *tape, idetape_pc_t *pc, uns set_bit(PC_DMA_RECOMMENDED, &pc->flags); } -/* - * idetape_do_request is our request handling function. - */ static ide_startstop_t idetape_do_request(ide_drive_t *drive, struct request *rq, sector_t block) { @@ -1635,18 +1563,14 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive, rq->sector, rq->nr_sectors, rq->current_nr_sectors); if (!blk_special_request(rq)) { - /* - * We do not support buffer cache originated requests. - */ + /* We do not support buffer cache originated requests. */ printk(KERN_NOTICE "ide-tape: %s: Unsupported request in " "request queue (%d)\n", drive->name, rq->cmd_type); ide_end_request(drive, 0, 0); return ide_stopped; } - /* - * Retry a failed packet command - */ + /* Retry a failed packet command */ if (tape->failed_pc != NULL && tape->pc->c[0] == REQUEST_SENSE) { return idetape_issue_pc(drive, tape->failed_pc); @@ -1733,9 +1657,7 @@ out: return idetape_issue_pc(drive, pc); } -/* - * Pipeline related functions - */ +/* Pipeline related functions */ static inline int idetape_pipeline_active (idetape_tape_t *tape) { int rc1, rc2; @@ -1746,16 +1668,16 @@ static inline int idetape_pipeline_active (idetape_tape_t *tape) } /* - * idetape_kmalloc_stage uses __get_free_page to allocate a pipeline - * stage, along with all the necessary small buffers which together make - * a buffer of size tape->stage_size (or a bit more). We attempt to - * combine sequential pages as much as possible. + * The function below uses __get_free_page to allocate a pipeline stage, along + * with all the necessary small buffers which together make a buffer of size + * tape->stage_size (or a bit more). We attempt to combine sequential pages as + * much as possible. * - * Returns a pointer to the new allocated stage, or NULL if we - * can't (or don't want to) allocate a stage. + * It returns a pointer to the new allocated stage, or NULL if we can't (or + * don't want to) allocate a stage. * - * Pipeline stages are optional and are used to increase performance. - * If we can't allocate them, we'll manage without them. + * Pipeline stages are optional and are used to increase performance. If we + * can't allocate them, we'll manage without them. */ static idetape_stage_t *__idetape_kmalloc_stage (idetape_tape_t *tape, int full, int clear) { @@ -1913,9 +1835,7 @@ static void idetape_switch_buffers (idetape_tape_t *tape, idetape_stage_t *stage idetape_init_merge_stage(tape); } -/* - * idetape_add_stage_tail adds a new stage at the end of the pipeline. - */ +/* Add a new stage at the end of the pipeline. */ static void idetape_add_stage_tail (ide_drive_t *drive,idetape_stage_t *stage) { idetape_tape_t *tape = drive->driver_data; @@ -1937,12 +1857,9 @@ static void idetape_add_stage_tail (ide_drive_t *drive,idetape_stage_t *stage) spin_unlock_irqrestore(&tape->lock, flags); } -/* - * idetape_wait_for_request installs a completion in a pending request - * and sleeps until it is serviced. - * - * The caller should ensure that the request will not be serviced - * before we install the completion (usually by disabling interrupts). +/* Install a completion in a pending request and sleep until it is serviced. The + * caller should ensure that the request will not be serviced before we install + * the completion (usually by disabling interrupts). */ static void idetape_wait_for_request (ide_drive_t *drive, struct request *rq) { @@ -1996,12 +1913,8 @@ static ide_startstop_t idetape_read_position_callback(ide_drive_t *drive) } /* - * idetape_create_write_filemark_cmd will: - * - * 1. Write a filemark if write_filemark=1. - * 2. Flush the device buffers without writing a filemark - * if write_filemark=0. - * + * Write a filemark if write_filemark=1. Flush the device buffers without + * writing a filemark otherwise. */ static void idetape_create_write_filemark_cmd (ide_drive_t *drive, idetape_pc_t *pc,int write_filemark) { @@ -2020,24 +1933,17 @@ static void idetape_create_test_unit_ready_cmd(idetape_pc_t *pc) } /* - * idetape_queue_pc_tail is based on the following functions: - * - * ide_do_drive_cmd from ide.c - * cdrom_queue_request and cdrom_queue_packet_command from ide-cd.c - * - * We add a special packet command request to the tail of the request - * queue, and wait for it to be serviced. + * We add a special packet command request to the tail of the request queue, and + * wait for it to be serviced. This is not to be called from within the request + * handling part of the driver! We allocate here data on the stack and it is + * valid until the request is finished. This is not the case for the bottom part + * of the driver, where we are always leaving the functions to wait for an + * interrupt or a timer event. * - * This is not to be called from within the request handling part - * of the driver ! We allocate here data in the stack, and it is valid - * until the request is finished. This is not the case for the bottom - * part of the driver, where we are always leaving the functions to wait - * for an interrupt or a timer event. - * - * From the bottom part of the driver, we should allocate safe memory - * using idetape_next_pc_storage and idetape_next_rq_storage, and add - * the request to the request list without waiting for it to be serviced ! - * In that case, we usually use idetape_queue_pc_head. + * From the bottom part of the driver, we should allocate safe memory using + * idetape_next_pc_storage() and ide_tape_next_rq_storage(), and add the request + * to the request list without waiting for it to be serviced! In that case, we + * usually use idetape_queue_pc_head(). */ static int __idetape_queue_pc_tail (ide_drive_t *drive, idetape_pc_t *pc) { @@ -2065,9 +1971,7 @@ static int idetape_wait_ready(ide_drive_t *drive, unsigned long timeout) idetape_pc_t pc; int load_attempted = 0; - /* - * Wait for the tape to become ready - */ + /* Wait for the tape to become ready */ set_bit(IDETAPE_MEDIUM_PRESENT, &tape->flags); timeout += jiffies; while (time_before(jiffies, timeout)) { @@ -2075,7 +1979,8 @@ static int idetape_wait_ready(ide_drive_t *drive, unsigned long timeout) if (!__idetape_queue_pc_tail(drive, &pc)) return 0; if ((tape->sense_key == 2 && tape->asc == 4 && tape->ascq == 2) - || (tape->asc == 0x3A)) { /* no media */ + || (tape->asc == 0x3A)) { + /* no media */ if (load_attempted) return -ENOMEDIUM; idetape_create_load_unload_cmd(drive, &pc, IDETAPE_LU_LOAD_MASK); @@ -2203,13 +2108,10 @@ static int __idetape_discard_read_pipeline (ide_drive_t *drive) } /* - * idetape_position_tape positions the tape to the requested block - * using the LOCATE packet command. A READ POSITION command is then - * issued to check where we are positioned. - * - * Like all higher level operations, we queue the commands at the tail - * of the request queue and wait for their completion. - * + * Position the tape to the requested block using the LOCATE packet command. + * A READ POSITION command is then issued to check where we are positioned. Like + * all higher level operations, we queue the commands at the tail of the request + * queue and wait for their completion. */ static int idetape_position_tape (ide_drive_t *drive, unsigned int block, u8 partition, int skip) { @@ -2247,8 +2149,8 @@ static void idetape_discard_read_pipeline (ide_drive_t *drive, int restore_posit } /* - * idetape_queue_rw_tail generates a read/write request for the block - * device interface and wait for it to be serviced. + * Generate a read/write request for the block device interface and wait for it + * to be serviced. */ static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int blocks, struct idetape_bh *bh) { @@ -2343,15 +2245,15 @@ static void idetape_wait_first_stage (ide_drive_t *drive) } /* - * idetape_add_chrdev_write_request tries to add a character device - * originated write request to our pipeline. In case we don't succeed, - * we revert to non-pipelined operation mode for this request. + * Try to add a character device originated write request to our pipeline. In + * case we don't succeed, we revert to non-pipelined operation mode for this + * request. In order to accomplish that, we * - * 1. Try to allocate a new pipeline stage. - * 2. If we can't, wait for more and more requests to be serviced - * and try again each time. - * 3. If we still can't allocate a stage, fallback to - * non-pipelined operation mode for this request. + * 1. Try to allocate a new pipeline stage. + * 2. If we can't, wait for more and more requests to be serviced and try again + * each time. + * 3. If we still can't allocate a stage, fallback to non-pipelined operation + * mode for this request. */ static int idetape_add_chrdev_write_request (ide_drive_t *drive, int blocks) { @@ -2362,10 +2264,7 @@ static int idetape_add_chrdev_write_request (ide_drive_t *drive, int blocks) debug_log(DBG_CHRDEV, "Enter %s\n", __func__); - /* - * Attempt to allocate a new stage. - * Pay special attention to possible race conditions. - */ + /* Attempt to allocate a new stage. Beware possible race conditions. */ while ((new_stage = idetape_kmalloc_stage(tape)) == NULL) { spin_lock_irqsave(&tape->lock, flags); if (idetape_pipeline_active(tape)) { @@ -2377,8 +2276,8 @@ static int idetape_add_chrdev_write_request (ide_drive_t *drive, int blocks) if (idetape_pipeline_active(tape)) continue; /* - * Linux is short on memory. Fallback to - * non-pipelined operation mode for this request. + * The machine is short on memory. Fallback to non- + * pipelined operation mode for this request. */ return idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, blocks, tape->merge_stage->bh); } @@ -2395,11 +2294,11 @@ static int idetape_add_chrdev_write_request (ide_drive_t *drive, int blocks) idetape_calculate_speeds(drive); /* - * Estimate whether the tape has stopped writing by checking - * if our write pipeline is currently empty. If we are not - * writing anymore, wait for the pipeline to be full enough - * (90%) before starting to service requests, so that we will - * be able to keep up with the higher speeds of the tape. + * Estimate whether the tape has stopped writing by checking if our + * write pipeline is currently empty. If we are not writing anymore, + * wait for the pipeline to be almost completely full (90%) before + * starting to service requests, so that we will be able to keep up with + * the higher speeds of the tape. */ if (!idetape_pipeline_active(tape)) { if (tape->nr_stages >= tape->max_stages * 9 / 10 || @@ -2420,8 +2319,8 @@ static int idetape_add_chrdev_write_request (ide_drive_t *drive, int blocks) } /* - * idetape_wait_for_pipeline will wait until all pending pipeline - * requests are serviced. Typically called on device close. + * Wait until all pending pipeline requests are serviced. Typically called on + * device close. */ static void idetape_wait_for_pipeline (ide_drive_t *drive) { @@ -2490,10 +2389,10 @@ static void idetape_empty_write_pipeline (ide_drive_t *drive) tape->chrdev_dir = IDETAPE_DIR_NONE; /* - * On the next backup, perform the feedback loop again. - * (I don't want to keep sense information between backups, - * as some systems are constantly on, and the system load - * can be totally different on the next backup). + * On the next backup, perform the feedback loop again. (I don't want to + * keep sense information between backups, as some systems are + * constantly on, and the system load can be totally different on the + * next backup). */ tape->max_stages = tape->min_pipeline; if (tape->first_stage != NULL || @@ -2545,11 +2444,10 @@ static int idetape_init_read(ide_drive_t *drive, int max_stages) tape->chrdev_dir = IDETAPE_DIR_READ; /* - * Issue a read 0 command to ensure that DSC handshake - * is switched from completion mode to buffer available - * mode. - * No point in issuing this if DSC overlap isn't supported, - * some drives (Seagate STT3401A) will return an error. + * Issue a read 0 command to ensure that DSC handshake is + * switched from completion mode to buffer available mode. + * No point in issuing this if DSC overlap isn't supported, some + * drives (Seagate STT3401A) will return an error. */ if (drive->dsc_overlap) { bytes_read = idetape_queue_rw_tail(drive, REQ_IDETAPE_READ, 0, tape->merge_stage->bh); @@ -2590,9 +2488,8 @@ static int idetape_init_read(ide_drive_t *drive, int max_stages) } /* - * idetape_add_chrdev_read_request is called from idetape_chrdev_read - * to service a character device read request and add read-ahead - * requests to our pipeline. + * Called from idetape_chrdev_read() to service a character device read request + * and add read-ahead requests to our pipeline. */ static int idetape_add_chrdev_read_request (ide_drive_t *drive,int blocks) { @@ -2603,16 +2500,11 @@ static int idetape_add_chrdev_read_request (ide_drive_t *drive,int blocks) debug_log(DBG_PROCS, "Enter %s, %d blocks\n", __func__, blocks); - /* - * If we are at a filemark, return a read length of 0 - */ + /* If we are at a filemark, return a read length of 0 */ if (test_bit(IDETAPE_FILEMARK, &tape->flags)) return 0; - /* - * Wait for the next block to be available at the head - * of the pipeline - */ + /* Wait for the next block to reach the head of the pipeline. */ idetape_init_read(drive, tape->max_stages); if (tape->first_stage == NULL) { if (test_bit(IDETAPE_PIPELINE_ERROR, &tape->flags)) @@ -2651,7 +2543,7 @@ static void idetape_pad_zeros (ide_drive_t *drive, int bcount) idetape_tape_t *tape = drive->driver_data; struct idetape_bh *bh; int blocks; - + while (bcount) { unsigned int count; @@ -2691,10 +2583,9 @@ static int idetape_pipeline_size (ide_drive_t *drive) } /* - * Rewinds the tape to the Beginning Of the current Partition (BOP). - * - * We currently support only one partition. - */ + * Rewinds the tape to the Beginning Of the current Partition (BOP). We + * currently support only one partition. + */ static int idetape_rewind_tape (ide_drive_t *drive) { int retval; @@ -2716,13 +2607,7 @@ static int idetape_rewind_tape (ide_drive_t *drive) return 0; } -/* - * Our special ide-tape ioctl's. - * - * Currently there aren't any ioctl's. - * mtio.h compatible commands should be issued to the character device - * interface. - */ +/* mtio.h compatible commands should be issued to the chrdev interface. */ static int idetape_blkdev_ioctl(ide_drive_t *drive, unsigned int cmd, unsigned long arg) { idetape_tape_t *tape = drive->driver_data; @@ -2756,13 +2641,11 @@ static int idetape_blkdev_ioctl(ide_drive_t *drive, unsigned int cmd, unsigned l } /* - * idetape_space_over_filemarks is now a bit more complicated than just - * passing the command to the tape since we may have crossed some - * filemarks during our pipelined read-ahead mode. - * - * As a minor side effect, the pipeline enables us to support MTFSFM when - * the filemark is in our internal pipeline even if the tape doesn't - * support spacing over filemarks in the reverse direction. + * The function below is now a bit more complicated than just passing the + * command to the tape since we may have crossed some filemarks during our + * pipelined read-ahead mode. As a minor side effect, the pipeline enables us to + * support MTFSFM when the filemark is in our internal pipeline even if the tape + * doesn't support spacing over filemarks in the reverse direction. */ static int idetape_space_over_filemarks (ide_drive_t *drive,short mt_op,int mt_count) { @@ -2781,10 +2664,7 @@ static int idetape_space_over_filemarks (ide_drive_t *drive,short mt_op,int mt_c } if (tape->chrdev_dir == IDETAPE_DIR_READ) { - /* - * We have a read-ahead buffer. Scan it for crossed - * filemarks. - */ + /* its a read-ahead buffer, scan it for crossed filemarks. */ tape->merge_stage_size = 0; if (test_and_clear_bit(IDETAPE_FILEMARK, &tape->flags)) ++count; @@ -2797,13 +2677,15 @@ static int idetape_space_over_filemarks (ide_drive_t *drive,short mt_op,int mt_c spin_lock_irqsave(&tape->lock, flags); if (tape->first_stage == tape->active_stage) { /* - * We have reached the active stage in the read pipeline. - * There is no point in allowing the drive to continue - * reading any farther, so we stop the pipeline. + * We have reached the active stage in the read + * pipeline. There is no point in allowing the + * drive to continue reading any farther, so we + * stop the pipeline. * - * This section should be moved to a separate subroutine, - * because a similar function is performed in - * __idetape_discard_read_pipeline(), for example. + * This section should be moved to a separate + * subroutine because similar operations are + * done in __idetape_discard_read_pipeline(), + * for example. */ tape->next_stage = NULL; spin_unlock_irqrestore(&tape->lock, flags); @@ -2819,8 +2701,8 @@ static int idetape_space_over_filemarks (ide_drive_t *drive,short mt_op,int mt_c } /* - * The filemark was not found in our internal pipeline. - * Now we can issue the space command. + * The filemark was not found in our internal pipeline; now we can issue + * the space command. */ switch (mt_op) { case MTFSF: @@ -2843,21 +2725,19 @@ static int idetape_space_over_filemarks (ide_drive_t *drive,short mt_op,int mt_c /* - * Our character device read / write functions. + * Our character device read / write functions. * - * The tape is optimized to maximize throughput when it is transferring - * an integral number of the "continuous transfer limit", which is - * a parameter of the specific tape (26 KB on my particular tape). - * (32 kB for Onstream) + * The tape is optimized to maximize throughput when it is transferring an + * integral number of the "continuous transfer limit", which is a parameter of + * the specific tape (26kB on my particular tape, 32kB for Onstream). * - * As of version 1.3 of the driver, the character device provides an - * abstract continuous view of the media - any mix of block sizes (even 1 - * byte) on the same backup/restore procedure is supported. The driver - * will internally convert the requests to the recommended transfer unit, - * so that an unmatch between the user's block size to the recommended - * size will only result in a (slightly) increased driver overhead, but - * will no longer hit performance. - * This is not applicable to Onstream. + * As of version 1.3 of the driver, the character device provides an abstract + * continuous view of the media - any mix of block sizes (even 1 byte) on the + * same backup/restore procedure is supported. The driver will internally + * convert the requests to the recommended transfer unit, so that an unmatch + * between the user's block size to the recommended size will only result in a + * (slightly) increased driver overhead, but will no longer hit performance. + * This is not applicable to Onstream. */ static ssize_t idetape_chrdev_read (struct file *file, char __user *buf, size_t count, loff_t *ppos) @@ -2950,11 +2830,10 @@ static ssize_t idetape_chrdev_write (struct file *file, const char __user *buf, idetape_init_merge_stage(tape); /* - * Issue a write 0 command to ensure that DSC handshake - * is switched from completion mode to buffer available - * mode. - * No point in issuing this if DSC overlap isn't supported, - * some drives (Seagate STT3401A) will return an error. + * Issue a write 0 command to ensure that DSC handshake is + * switched from completion mode to buffer available mode. No + * point in issuing this if DSC overlap isn't supported, some + * drives (Seagate STT3401A) will return an error. */ if (drive->dsc_overlap) { ssize_t retval = idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, 0, tape->merge_stage->bh); @@ -3045,9 +2924,7 @@ static int idetape_mtioctop(ide_drive_t *drive, short mt_op, int mt_count) debug_log(DBG_ERR, "Handling MTIOCTOP ioctl: mt_op=%d, mt_count=%d\n", mt_op, mt_count); - /* - * Commands which need our pipelined read-ahead stages. - */ + /* Commands which need our pipelined read-ahead stages. */ switch (mt_op) { case MTFSF: case MTFSFM: @@ -3235,9 +3112,6 @@ static void ide_tape_get_bsize_from_bdesc(ide_drive_t *drive) tape->drv_write_prot = (pc.buffer[2] & 0x80) >> 7; } -/* - * Our character device open function. - */ static int idetape_chrdev_open (struct inode *inode, struct file *filp) { unsigned int minor = iminor(inode), i = minor & ~0xc0; @@ -3304,9 +3178,7 @@ static int idetape_chrdev_open (struct inode *inode, struct file *filp) } } - /* - * Lock the tape drive door so user can't eject. - */ + /* Lock the tape drive door so user can't eject. */ if (tape->chrdev_dir == IDETAPE_DIR_NONE) { if (idetape_create_prevent_cmd(drive, &pc, 1)) { if (!idetape_queue_pc_tail(drive, &pc)) { @@ -3341,9 +3213,6 @@ static void idetape_write_release (ide_drive_t *drive, unsigned int minor) idetape_flush_tape_buffers(drive); } -/* - * Our character device release function. - */ static int idetape_chrdev_release (struct inode *inode, struct file *filp) { struct ide_tape_obj *tape = ide_tape_f(filp); @@ -3500,9 +3369,6 @@ static void idetape_add_settings (ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; -/* - * drive setting name read/write data type min max mul_factor div_factor data pointer set function - */ ide_add_setting(drive, "buffer", SETTING_READ, TYPE_SHORT, 0, 0xffff, 1, 2, (u16 *)&tape->caps[16], NULL); ide_add_setting(drive, "pipeline_min", SETTING_RW, TYPE_INT, 1, 0xffff, tape->stage_size / 1024, 1, &tape->min_pipeline, NULL); @@ -3529,16 +3395,15 @@ static inline void idetape_add_settings(ide_drive_t *drive) { ; } #endif /* - * ide_setup is called to: + * The function below is called to: * - * 1. Initialize our various state variables. - * 2. Ask the tape for its capabilities. - * 3. Allocate a buffer which will be used for data - * transfer. The buffer size is chosen based on - * the recommendation which we received in step (2). + * 1. Initialize our various state variables. + * 2. Ask the tape for its capabilities. + * 3. Allocate a buffer which will be used for data transfer. The buffer size + * is chosen based on the recommendation which we received in step 2. * - * Note that at this point ide.c already assigned us an irq, so that - * we can queue requests here and wait for their completion. + * Note that at this point ide.c already assigned us an irq, so that we can + * queue requests here and wait for their completion. */ static void idetape_setup (ide_drive_t *drive, idetape_tape_t *tape, int minor) { @@ -3572,7 +3437,7 @@ static void idetape_setup (ide_drive_t *drive, idetape_tape_t *tape, int minor) set_bit(IDETAPE_DRQ_INTERRUPT, &tape->flags); tape->min_pipeline = tape->max_pipeline = tape->max_stages = 10; - + idetape_get_inquiry_results(drive); idetape_get_mode_sense_results(drive); ide_tape_get_bsize_from_bdesc(drive); @@ -3595,9 +3460,7 @@ static void idetape_setup (ide_drive_t *drive, idetape_tape_t *tape, int minor) tape->max_stages = speed * 1000 * 10 / tape->stage_size; - /* - * Limit memory use for pipeline to 10% of physical memory - */ + /* Limit memory use for pipeline to 10% of physical memory */ si_meminfo(&si); if (tape->max_stages * tape->stage_size > si.totalram * si.mem_unit / 10) tape->max_stages = si.totalram * si.mem_unit / (10 * tape->stage_size); @@ -3617,8 +3480,8 @@ static void idetape_setup (ide_drive_t *drive, idetape_tape_t *tape, int minor) t = t1; /* - * Ensure that the number we got makes sense; limit - * it within IDETAPE_DSC_RW_MIN and IDETAPE_DSC_RW_MAX. + * Ensure that the number we got makes sense; limit it within + * IDETAPE_DSC_RW_MIN and IDETAPE_DSC_RW_MAX. */ tape->best_dsc_rw_freq = max_t(unsigned long, min_t(unsigned long, t, IDETAPE_DSC_RW_MAX), @@ -3706,9 +3569,7 @@ static ide_driver_t idetape_driver = { #endif }; -/* - * Our character device supporting functions, passed to register_chrdev. - */ +/* Our character device supporting functions, passed to register_chrdev. */ static const struct file_operations idetape_fops = { .owner = THIS_MODULE, .read = idetape_chrdev_read, -- cgit v1.2.3 From 71071b8e60d6dab130e428a016b872e2623eddaa Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Wed, 6 Feb 2008 02:57:53 +0100 Subject: ide-tape: remove struct idetape_id_gcw Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-tape.c | 56 +++++++++++++++++++++----------------------------- 1 file changed, 23 insertions(+), 33 deletions(-) (limited to 'drivers/ide/ide-tape.c') diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index d8b02fb0284c..aed25590d058 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -498,20 +498,6 @@ enum { #define IDETAPE_ERROR_FILEMARK 102 #define IDETAPE_ERROR_EOD 103 -/* - * The following is used to format the general configuration word of - * the ATAPI IDENTIFY DEVICE command. - */ -struct idetape_id_gcw { - unsigned packet_size :2; /* Packet Size */ - unsigned reserved234 :3; /* Reserved */ - unsigned drq_type :2; /* Command packet DRQ type */ - unsigned removable :1; /* Removable media */ - unsigned device_type :5; /* Device type */ - unsigned reserved13 :1; /* Reserved */ - unsigned protocol :2; /* Protocol type */ -}; - /* Structures related to the SELECT SENSE / MODE SENSE packet commands. */ #define IDETAPE_BLOCK_DESCRIPTOR 0 #define IDETAPE_CAPABILITIES_PAGE 0x2a @@ -3254,37 +3240,39 @@ static int idetape_chrdev_release (struct inode *inode, struct file *filp) } /* - * idetape_identify_device is called to check the contents of the - * ATAPI IDENTIFY command results. We return: + * check the contents of the ATAPI IDENTIFY command results. We return: * - * 1 If the tape can be supported by us, based on the information - * we have so far. + * 1 - If the tape can be supported by us, based on the information we have so + * far. * - * 0 If this tape driver is not currently supported by us. + * 0 - If this tape driver is not currently supported by us. */ -static int idetape_identify_device (ide_drive_t *drive) +static int idetape_identify_device(ide_drive_t *drive) { - struct idetape_id_gcw gcw; - struct hd_driveid *id = drive->id; + u8 gcw[2], protocol, device_type, removable, packet_size; if (drive->id_read == 0) return 1; - *((unsigned short *) &gcw) = id->config; + *((unsigned short *) &gcw) = drive->id->config; - /* Check that we can support this device */ + protocol = (gcw[1] & 0xC0) >> 6; + device_type = gcw[1] & 0x1F; + removable = !!(gcw[0] & 0x80); + packet_size = gcw[0] & 0x3; - if (gcw.protocol != 2) + /* Check that we can support this device */ + if (protocol != 2) printk(KERN_ERR "ide-tape: Protocol (0x%02x) is not ATAPI\n", - gcw.protocol); - else if (gcw.device_type != 1) + protocol); + else if (device_type != 1) printk(KERN_ERR "ide-tape: Device type (0x%02x) is not set " - "to tape\n", gcw.device_type); - else if (!gcw.removable) + "to tape\n", device_type); + else if (!removable) printk(KERN_ERR "ide-tape: The removable flag is not set\n"); - else if (gcw.packet_size != 0) { + else if (packet_size != 0) { printk(KERN_ERR "ide-tape: Packet size (0x%02x) is not 12 " - "bytes long\n", gcw.packet_size); + "bytes long\n", packet_size); } else return 1; return 0; @@ -3409,8 +3397,8 @@ static void idetape_setup (ide_drive_t *drive, idetape_tape_t *tape, int minor) { unsigned long t1, tmid, tn, t; int speed; - struct idetape_id_gcw gcw; int stage_size; + u8 gcw[2]; struct sysinfo si; u16 *ctl = (u16 *)&tape->caps[12]; @@ -3433,7 +3421,9 @@ static void idetape_setup (ide_drive_t *drive, idetape_tape_t *tape, int minor) tape->max_insert_speed = 10000; tape->speed_control = 1; *((unsigned short *) &gcw) = drive->id->config; - if (gcw.drq_type == 1) + + /* Command packet DRQ type */ + if (((gcw[0] & 0x60) >> 5) == 1) set_bit(IDETAPE_DRQ_INTERRUPT, &tape->flags); tape->min_pipeline = tape->max_pipeline = tape->max_stages = 10; -- cgit v1.2.3 From 1f27e38dd312867295670c29a301fce3f5b5d3b3 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Wed, 6 Feb 2008 02:57:54 +0100 Subject: ide-tape: remove unused "length" arg from idetape_create_read_buffer_cmd() Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-tape.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) (limited to 'drivers/ide/ide-tape.c') diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index aed25590d058..fc57cd04391b 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -1497,7 +1497,8 @@ static void idetape_create_read_cmd(idetape_tape_t *tape, idetape_pc_t *pc, unsi set_bit(PC_DMA_RECOMMENDED, &pc->flags); } -static void idetape_create_read_buffer_cmd(idetape_tape_t *tape, idetape_pc_t *pc, unsigned int length, struct idetape_bh *bh) +static void idetape_create_read_buffer_cmd(idetape_tape_t *tape, + idetape_pc_t *pc, struct idetape_bh *bh) { int size = 32768; struct idetape_bh *p = bh; @@ -1515,7 +1516,8 @@ static void idetape_create_read_buffer_cmd(idetape_tape_t *tape, idetape_pc_t *p atomic_set(&p->b_count, 0); p = p->b_reqnext; } - pc->request_transfer = pc->buffer_size = size; + pc->request_transfer = size; + pc->buffer_size = size; } static void idetape_create_write_cmd(idetape_tape_t *tape, idetape_pc_t *pc, unsigned int length, struct idetape_bh *bh) @@ -1625,7 +1627,8 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive, if (rq->cmd[0] & REQ_IDETAPE_READ_BUFFER) { tape->postpone_cnt = 0; pc = idetape_next_pc_storage(drive); - idetape_create_read_buffer_cmd(tape, pc, rq->current_nr_sectors, (struct idetape_bh *)rq->special); + idetape_create_read_buffer_cmd(tape, pc, + (struct idetape_bh *)rq->special); goto out; } if (rq->cmd[0] & REQ_IDETAPE_PC1) { -- cgit v1.2.3 From c837cfa5b61f0ef92cf2c01f3f48808751f68897 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Wed, 6 Feb 2008 02:57:54 +0100 Subject: ide-tape: include proper headers Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-tape.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/ide/ide-tape.c') diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index fc57cd04391b..2d148412d83b 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -39,9 +39,9 @@ #include #include -#include -#include -#include +#include +#include +#include #include #include -- cgit v1.2.3 From 9c14576886bb4e3cfe624c9ec95d980d58a109de Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Wed, 6 Feb 2008 02:57:54 +0100 Subject: ide-tape: collect module-related macro calls at the end Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-tape.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'drivers/ide/ide-tape.c') diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 2d148412d83b..916b42233be5 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -3684,9 +3684,6 @@ failed: return -ENODEV; } -MODULE_DESCRIPTION("ATAPI Streaming TAPE Driver"); -MODULE_LICENSE("GPL"); - static void __exit idetape_exit (void) { driver_unregister(&idetape_driver.gen_driver); @@ -3729,3 +3726,5 @@ MODULE_ALIAS("ide:*m-tape*"); module_init(idetape_init); module_exit(idetape_exit); MODULE_ALIAS_CHARDEV_MAJOR(IDETAPE_MAJOR); +MODULE_DESCRIPTION("ATAPI Streaming TAPE Driver"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3 From bf6296b68848219f585c597de422621e236afc3c Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Wed, 6 Feb 2008 02:57:54 +0100 Subject: ide-tape: remove leftover OnStream support warning Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-tape.c | 4 ---- 1 file changed, 4 deletions(-) (limited to 'drivers/ide/ide-tape.c') diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 916b42233be5..42f1b65c9410 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -3632,10 +3632,6 @@ static int ide_tape_probe(ide_drive_t *drive) printk("ide-tape: passing drive %s to ide-scsi emulation.\n", drive->name); goto failed; } - if (strstr(drive->id->model, "OnStream DI-")) { - printk(KERN_WARNING "ide-tape: Use drive %s with ide-scsi emulation and osst.\n", drive->name); - printk(KERN_WARNING "ide-tape: OnStream support will be removed soon from ide-tape!\n"); - } tape = kzalloc(sizeof (idetape_tape_t), GFP_KERNEL); if (tape == NULL) { printk(KERN_ERR "ide-tape: %s: Can't allocate a tape structure\n", drive->name); -- cgit v1.2.3 From 24d57f8b2880755b3704c110cd431b4dd6b75580 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Wed, 6 Feb 2008 02:57:54 +0100 Subject: ide-tape: fix syntax error in idetape_identify_device() Spotted by Sergei Shtylyov. CC: Sergei Shtylyov Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-tape.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/ide/ide-tape.c') diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 42f1b65c9410..0c56abe4378b 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -3274,8 +3274,8 @@ static int idetape_identify_device(ide_drive_t *drive) else if (!removable) printk(KERN_ERR "ide-tape: The removable flag is not set\n"); else if (packet_size != 0) { - printk(KERN_ERR "ide-tape: Packet size (0x%02x) is not 12 " - "bytes long\n", packet_size); + printk(KERN_ERR "ide-tape: Packet size (0x%02x) is not 12" + " bytes\n", packet_size); } else return 1; return 0; -- cgit v1.2.3 From 5a04cfa911f9c3c648240bd95002479d83619260 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Wed, 6 Feb 2008 02:57:54 +0100 Subject: ide-tape: cleanup the remaining codestyle issues ... thus decreasing checkpatch.pl errors to 0. Bart: - remove needless function prototypes while at it - remove needless parentheses while at it - add missing KERN_ level to ide_tape_probe() - other minor fixups Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-tape.c | 832 ++++++++++++++++++++++++++++--------------------- 1 file changed, 480 insertions(+), 352 deletions(-) (limited to 'drivers/ide/ide-tape.c') diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 0c56abe4378b..11e1383150d9 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -506,7 +506,7 @@ enum { * The variables below are used for the character device interface. Additional * state variables are defined in our ide_drive_t structure. */ -static struct ide_tape_obj * idetape_devs[MAX_HWIFS * MAX_DRIVES]; +static struct ide_tape_obj *idetape_devs[MAX_HWIFS * MAX_DRIVES]; #define ide_tape_f(file) ((file)->private_data) @@ -522,20 +522,18 @@ static struct ide_tape_obj *ide_tape_chrdev_get(unsigned int i) return tape; } -static int idetape_chrdev_release (struct inode *inode, struct file *filp); -static void idetape_write_release (ide_drive_t *drive, unsigned int minor); - /* * Too bad. The drive wants to send us data which we are not ready to accept. * Just throw it away. */ -static void idetape_discard_data (ide_drive_t *drive, unsigned int bcount) +static void idetape_discard_data(ide_drive_t *drive, unsigned int bcount) { while (bcount--) (void) HWIF(drive)->INB(IDE_DATA_REG); } -static void idetape_input_buffers (ide_drive_t *drive, idetape_pc_t *pc, unsigned int bcount) +static void idetape_input_buffers(ide_drive_t *drive, idetape_pc_t *pc, + unsigned int bcount) { struct idetape_bh *bh = pc->bh; int count; @@ -547,8 +545,11 @@ static void idetape_input_buffers (ide_drive_t *drive, idetape_pc_t *pc, unsigne idetape_discard_data(drive, bcount); return; } - count = min((unsigned int)(bh->b_size - atomic_read(&bh->b_count)), bcount); - HWIF(drive)->atapi_input_bytes(drive, bh->b_data + atomic_read(&bh->b_count), count); + count = min( + (unsigned int)(bh->b_size - atomic_read(&bh->b_count)), + bcount); + HWIF(drive)->atapi_input_bytes(drive, bh->b_data + + atomic_read(&bh->b_count), count); bcount -= count; atomic_add(count, &bh->b_count); if (atomic_read(&bh->b_count) == bh->b_size) { @@ -560,15 +561,16 @@ static void idetape_input_buffers (ide_drive_t *drive, idetape_pc_t *pc, unsigne pc->bh = bh; } -static void idetape_output_buffers (ide_drive_t *drive, idetape_pc_t *pc, unsigned int bcount) +static void idetape_output_buffers(ide_drive_t *drive, idetape_pc_t *pc, + unsigned int bcount) { struct idetape_bh *bh = pc->bh; int count; while (bcount) { if (bh == NULL) { - printk(KERN_ERR "ide-tape: bh == NULL in " - "idetape_output_buffers\n"); + printk(KERN_ERR "ide-tape: bh == NULL in %s\n", + __func__); return; } count = min((unsigned int)pc->b_count, (unsigned int)bcount); @@ -577,7 +579,8 @@ static void idetape_output_buffers (ide_drive_t *drive, idetape_pc_t *pc, unsign pc->b_data += count; pc->b_count -= count; if (!pc->b_count) { - pc->bh = bh = bh->b_reqnext; + bh = bh->b_reqnext; + pc->bh = bh; if (bh) { pc->b_data = bh->b_data; pc->b_count = atomic_read(&bh->b_count); @@ -586,7 +589,7 @@ static void idetape_output_buffers (ide_drive_t *drive, idetape_pc_t *pc, unsign } } -static void idetape_update_buffers (idetape_pc_t *pc) +static void idetape_update_buffers(idetape_pc_t *pc) { struct idetape_bh *bh = pc->bh; int count; @@ -596,8 +599,8 @@ static void idetape_update_buffers (idetape_pc_t *pc) return; while (bcount) { if (bh == NULL) { - printk(KERN_ERR "ide-tape: bh == NULL in " - "idetape_update_buffers\n"); + printk(KERN_ERR "ide-tape: bh == NULL in %s\n", + __func__); return; } count = min((unsigned int)bh->b_size, (unsigned int)bcount); @@ -615,14 +618,14 @@ static void idetape_update_buffers (idetape_pc_t *pc) * driver. A storage space for a maximum of IDETAPE_PC_STACK packet * commands is allocated at initialization time. */ -static idetape_pc_t *idetape_next_pc_storage (ide_drive_t *drive) +static idetape_pc_t *idetape_next_pc_storage(ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; debug_log(DBG_PCRQ_STACK, "pc_stack_index=%d\n", tape->pc_stack_index); if (tape->pc_stack_index == IDETAPE_PC_STACK) - tape->pc_stack_index=0; + tape->pc_stack_index = 0; return (&tape->pc_stack[tape->pc_stack_index++]); } @@ -631,26 +634,26 @@ static idetape_pc_t *idetape_next_pc_storage (ide_drive_t *drive) * Since we queue packet commands in the request queue, we need to * allocate a request, along with the allocation of a packet command. */ - + /************************************************************** * * * This should get fixed to use kmalloc(.., GFP_ATOMIC) * * followed later on by kfree(). -ml * * * **************************************************************/ - -static struct request *idetape_next_rq_storage (ide_drive_t *drive) + +static struct request *idetape_next_rq_storage(ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; debug_log(DBG_PCRQ_STACK, "rq_stack_index=%d\n", tape->rq_stack_index); if (tape->rq_stack_index == IDETAPE_PC_STACK) - tape->rq_stack_index=0; + tape->rq_stack_index = 0; return (&tape->rq_stack[tape->rq_stack_index++]); } -static void idetape_init_pc (idetape_pc_t *pc) +static void idetape_init_pc(idetape_pc_t *pc) { memset(pc->c, 0, 12); pc->retries = 0; @@ -746,7 +749,7 @@ static void idetape_activate_next_stage(ide_drive_t *drive) } /* Free a stage along with its related buffers completely. */ -static void __idetape_kfree_stage (idetape_stage_t *stage) +static void __idetape_kfree_stage(idetape_stage_t *stage) { struct idetape_bh *prev_bh, *bh = stage->bh; int size; @@ -767,7 +770,7 @@ static void __idetape_kfree_stage (idetape_stage_t *stage) kfree(stage); } -static void idetape_kfree_stage (idetape_tape_t *tape, idetape_stage_t *stage) +static void idetape_kfree_stage(idetape_tape_t *tape, idetape_stage_t *stage) { __idetape_kfree_stage(stage); } @@ -776,7 +779,7 @@ static void idetape_kfree_stage (idetape_tape_t *tape, idetape_stage_t *stage) * Remove tape->first_stage from the pipeline. The caller should avoid race * conditions. */ -static void idetape_remove_stage_head (ide_drive_t *drive) +static void idetape_remove_stage_head(ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; idetape_stage_t *stage; @@ -799,9 +802,11 @@ static void idetape_remove_stage_head (ide_drive_t *drive) if (tape->first_stage == NULL) { tape->last_stage = NULL; if (tape->next_stage != NULL) - printk(KERN_ERR "ide-tape: bug: tape->next_stage != NULL\n"); + printk(KERN_ERR "ide-tape: bug: tape->next_stage !=" + " NULL\n"); if (tape->nr_stages) - printk(KERN_ERR "ide-tape: bug: nr_stages should be 0 now\n"); + printk(KERN_ERR "ide-tape: bug: nr_stages should be 0 " + "now\n"); } } @@ -847,9 +852,9 @@ static int idetape_end_request(ide_drive_t *drive, int uptodate, int nr_sects) debug_log(DBG_PROCS, "Enter %s\n", __func__); switch (uptodate) { - case 0: error = IDETAPE_ERROR_GENERAL; break; - case 1: error = 0; break; - default: error = uptodate; + case 0: error = IDETAPE_ERROR_GENERAL; break; + case 1: error = 0; break; + default: error = uptodate; } rq->errors = error; if (error) @@ -873,7 +878,8 @@ static int idetape_end_request(ide_drive_t *drive, int uptodate, int nr_sects) if (error) { set_bit(IDETAPE_PIPELINE_ERROR, &tape->flags); if (error == IDETAPE_ERROR_EOD) - idetape_abort_pipeline(drive, active_stage); + idetape_abort_pipeline(drive, + active_stage); } } else if (rq->cmd[0] & REQ_IDETAPE_READ) { if (error == IDETAPE_ERROR_EOD) { @@ -906,9 +912,6 @@ static int idetape_end_request(ide_drive_t *drive, int uptodate, int nr_sects) } } ide_end_drive_cmd(drive, 0, 0); -// blkdev_dequeue_request(rq); -// drive->rq = NULL; -// end_that_request_last(rq); if (remove_stage) idetape_remove_stage_head(drive); @@ -918,7 +921,7 @@ static int idetape_end_request(ide_drive_t *drive, int uptodate, int nr_sects) return 0; } -static ide_startstop_t idetape_request_sense_callback (ide_drive_t *drive) +static ide_startstop_t idetape_request_sense_callback(ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; @@ -928,15 +931,16 @@ static ide_startstop_t idetape_request_sense_callback (ide_drive_t *drive) idetape_analyze_error(drive, tape->pc->buffer); idetape_end_request(drive, 1, 0); } else { - printk(KERN_ERR "ide-tape: Error in REQUEST SENSE itself - Aborting request!\n"); + printk(KERN_ERR "ide-tape: Error in REQUEST SENSE itself - " + "Aborting request!\n"); idetape_end_request(drive, 0, 0); } return ide_stopped; } -static void idetape_create_request_sense_cmd (idetape_pc_t *pc) +static void idetape_create_request_sense_cmd(idetape_pc_t *pc) { - idetape_init_pc(pc); + idetape_init_pc(pc); pc->c[0] = REQUEST_SENSE; pc->c[4] = 20; pc->request_transfer = 20; @@ -965,7 +969,8 @@ static void idetape_init_rq(struct request *rq, u8 cmd) * handling functions should queue request to the lower level part and wait for * their completion using idetape_queue_pc_tail or idetape_queue_rw_tail. */ -static void idetape_queue_pc_head (ide_drive_t *drive, idetape_pc_t *pc,struct request *rq) +static void idetape_queue_pc_head(ide_drive_t *drive, idetape_pc_t *pc, + struct request *rq) { struct ide_tape_obj *tape = drive->driver_data; @@ -999,7 +1004,7 @@ static ide_startstop_t idetape_retry_pc (ide_drive_t *drive) * Postpone the current request so that ide.c will be able to service requests * from another device on the same hwgroup while we are polling for DSC. */ -static void idetape_postpone_request (ide_drive_t *drive) +static void idetape_postpone_request(ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; @@ -1027,7 +1032,7 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive) idetape_io_buf *iobuf; unsigned int temp; #if SIMULATE_ERRORS - static int error_sim_count = 0; + static int error_sim_count; #endif u16 bcount; u8 stat, ireason; @@ -1228,8 +1233,9 @@ static ide_startstop_t idetape_transfer_pc(ide_drive_t *drive) ide_startstop_t startstop; u8 ireason; - if (ide_wait_stat(&startstop,drive,DRQ_STAT,BUSY_STAT,WAIT_READY)) { - printk(KERN_ERR "ide-tape: Strange, packet command initiated yet DRQ isn't asserted\n"); + if (ide_wait_stat(&startstop, drive, DRQ_STAT, BUSY_STAT, WAIT_READY)) { + printk(KERN_ERR "ide-tape: Strange, packet command initiated " + "yet DRQ isn't asserted\n"); return startstop; } ireason = hwif->INB(IDE_IREASON_REG); @@ -1336,7 +1342,7 @@ static ide_startstop_t idetape_issue_pc(ide_drive_t *drive, idetape_pc_t *pc) } } -static ide_startstop_t idetape_pc_callback (ide_drive_t *drive) +static ide_startstop_t idetape_pc_callback(ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; @@ -1347,7 +1353,7 @@ static ide_startstop_t idetape_pc_callback (ide_drive_t *drive) } /* A mode sense command is used to "sense" tape parameters. */ -static void idetape_create_mode_sense_cmd (idetape_pc_t *pc, u8 page_code) +static void idetape_create_mode_sense_cmd(idetape_pc_t *pc, u8 page_code) { idetape_init_pc(pc); pc->c[0] = MODE_SENSE; @@ -1378,39 +1384,56 @@ static void idetape_calculate_speeds(ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; - if (time_after(jiffies, tape->controlled_pipeline_head_time + 120 * HZ)) { - tape->controlled_previous_pipeline_head = tape->controlled_last_pipeline_head; - tape->controlled_previous_head_time = tape->controlled_pipeline_head_time; + if (time_after(jiffies, + tape->controlled_pipeline_head_time + 120 * HZ)) { + tape->controlled_previous_pipeline_head = + tape->controlled_last_pipeline_head; + tape->controlled_previous_head_time = + tape->controlled_pipeline_head_time; tape->controlled_last_pipeline_head = tape->pipeline_head; tape->controlled_pipeline_head_time = jiffies; } if (time_after(jiffies, tape->controlled_pipeline_head_time + 60 * HZ)) - tape->controlled_pipeline_head_speed = (tape->pipeline_head - tape->controlled_last_pipeline_head) * 32 * HZ / (jiffies - tape->controlled_pipeline_head_time); + tape->controlled_pipeline_head_speed = (tape->pipeline_head - + tape->controlled_last_pipeline_head) * 32 * HZ / + (jiffies - tape->controlled_pipeline_head_time); else if (time_after(jiffies, tape->controlled_previous_head_time)) - tape->controlled_pipeline_head_speed = (tape->pipeline_head - tape->controlled_previous_pipeline_head) * 32 * HZ / (jiffies - tape->controlled_previous_head_time); + tape->controlled_pipeline_head_speed = (tape->pipeline_head - + tape->controlled_previous_pipeline_head) * 32 * + HZ / (jiffies - tape->controlled_previous_head_time); - if (tape->nr_pending_stages < tape->max_stages /*- 1 */) { + if (tape->nr_pending_stages < tape->max_stages/*- 1 */) { /* -1 for read mode error recovery */ - if (time_after(jiffies, tape->uncontrolled_previous_head_time + 10 * HZ)) { + if (time_after(jiffies, tape->uncontrolled_previous_head_time + + 10 * HZ)) { tape->uncontrolled_pipeline_head_time = jiffies; - tape->uncontrolled_pipeline_head_speed = (tape->pipeline_head - tape->uncontrolled_previous_pipeline_head) * 32 * HZ / (jiffies - tape->uncontrolled_previous_head_time); + tape->uncontrolled_pipeline_head_speed = + (tape->pipeline_head - + tape->uncontrolled_previous_pipeline_head) * + 32 * HZ / (jiffies - + tape->uncontrolled_previous_head_time); } } else { tape->uncontrolled_previous_head_time = jiffies; tape->uncontrolled_previous_pipeline_head = tape->pipeline_head; - if (time_after(jiffies, tape->uncontrolled_pipeline_head_time + 30 * HZ)) { + if (time_after(jiffies, tape->uncontrolled_pipeline_head_time + + 30 * HZ)) tape->uncontrolled_pipeline_head_time = jiffies; - } + } - tape->pipeline_head_speed = max(tape->uncontrolled_pipeline_head_speed, tape->controlled_pipeline_head_speed); + tape->pipeline_head_speed = max(tape->uncontrolled_pipeline_head_speed, + tape->controlled_pipeline_head_speed); if (tape->speed_control == 1) { if (tape->nr_pending_stages >= tape->max_stages / 2) tape->max_insert_speed = tape->pipeline_head_speed + - (1100 - tape->pipeline_head_speed) * 2 * (tape->nr_pending_stages - tape->max_stages / 2) / tape->max_stages; + (1100 - tape->pipeline_head_speed) * 2 * + (tape->nr_pending_stages - tape->max_stages / 2) + / tape->max_stages; else tape->max_insert_speed = 500 + - (tape->pipeline_head_speed - 500) * 2 * tape->nr_pending_stages / tape->max_stages; + (tape->pipeline_head_speed - 500) * 2 * + tape->nr_pending_stages / tape->max_stages; if (tape->nr_pending_stages >= tape->max_stages * 99 / 100) tape->max_insert_speed = 5000; @@ -1420,7 +1443,7 @@ static void idetape_calculate_speeds(ide_drive_t *drive) tape->max_insert_speed = max(tape->max_insert_speed, 500); } -static ide_startstop_t idetape_media_access_finished (ide_drive_t *drive) +static ide_startstop_t idetape_media_access_finished(ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; idetape_pc_t *pc = tape->pc; @@ -1447,7 +1470,7 @@ static ide_startstop_t idetape_media_access_finished (ide_drive_t *drive) return pc->callback(drive); } -static ide_startstop_t idetape_rw_callback (ide_drive_t *drive) +static ide_startstop_t idetape_rw_callback(ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; struct request *rq = HWGROUP(drive)->rq; @@ -1463,9 +1486,11 @@ static ide_startstop_t idetape_rw_callback (ide_drive_t *drive) tape->insert_size = 0; } if (time_after(jiffies, tape->insert_time)) - tape->insert_speed = tape->insert_size / 1024 * HZ / (jiffies - tape->insert_time); + tape->insert_speed = tape->insert_size / 1024 * HZ / + (jiffies - tape->insert_time); if (time_after_eq(jiffies, tape->avg_time + HZ)) { - tape->avg_speed = tape->avg_size * HZ / (jiffies - tape->avg_time) / 1024; + tape->avg_speed = tape->avg_size * HZ / + (jiffies - tape->avg_time) / 1024; tape->avg_size = 0; tape->avg_time = jiffies; } @@ -1481,7 +1506,8 @@ static ide_startstop_t idetape_rw_callback (ide_drive_t *drive) return ide_stopped; } -static void idetape_create_read_cmd(idetape_tape_t *tape, idetape_pc_t *pc, unsigned int length, struct idetape_bh *bh) +static void idetape_create_read_cmd(idetape_tape_t *tape, idetape_pc_t *pc, + unsigned int length, struct idetape_bh *bh) { idetape_init_pc(pc); pc->c[0] = READ_6; @@ -1520,7 +1546,8 @@ static void idetape_create_read_buffer_cmd(idetape_tape_t *tape, pc->buffer_size = size; } -static void idetape_create_write_cmd(idetape_tape_t *tape, idetape_pc_t *pc, unsigned int length, struct idetape_bh *bh) +static void idetape_create_write_cmd(idetape_tape_t *tape, idetape_pc_t *pc, + unsigned int length, struct idetape_bh *bh) { idetape_init_pc(pc); pc->c[0] = WRITE_6; @@ -1559,10 +1586,9 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive, } /* Retry a failed packet command */ - if (tape->failed_pc != NULL && - tape->pc->c[0] == REQUEST_SENSE) { + if (tape->failed_pc && tape->pc->c[0] == REQUEST_SENSE) return idetape_issue_pc(drive, tape->failed_pc); - } + if (postponed_rq != NULL) if (rq != postponed_rq) { printk(KERN_ERR "ide-tape: ide-tape.c bug - " @@ -1588,7 +1614,8 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive, } if (time_after(jiffies, tape->insert_time)) - tape->insert_speed = tape->insert_size / 1024 * HZ / (jiffies - tape->insert_time); + tape->insert_speed = tape->insert_size / 1024 * HZ / + (jiffies - tape->insert_time); idetape_calculate_speeds(drive); if (!test_and_clear_bit(IDETAPE_IGNORE_DSC, &tape->flags) && (stat & SEEK_STAT) == 0) { @@ -1605,7 +1632,9 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive, } else { return ide_do_reset(drive); } - } else if (time_after(jiffies, tape->dsc_polling_start + IDETAPE_DSC_MA_THRESHOLD)) + } else if (time_after(jiffies, + tape->dsc_polling_start + + IDETAPE_DSC_MA_THRESHOLD)) tape->dsc_poll_freq = IDETAPE_DSC_MA_SLOW; idetape_postpone_request(drive); return ide_stopped; @@ -1614,14 +1643,16 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive, tape->buffer_head++; tape->postpone_cnt = 0; pc = idetape_next_pc_storage(drive); - idetape_create_read_cmd(tape, pc, rq->current_nr_sectors, (struct idetape_bh *)rq->special); + idetape_create_read_cmd(tape, pc, rq->current_nr_sectors, + (struct idetape_bh *)rq->special); goto out; } if (rq->cmd[0] & REQ_IDETAPE_WRITE) { tape->buffer_head++; tape->postpone_cnt = 0; pc = idetape_next_pc_storage(drive); - idetape_create_write_cmd(tape, pc, rq->current_nr_sectors, (struct idetape_bh *)rq->special); + idetape_create_write_cmd(tape, pc, rq->current_nr_sectors, + (struct idetape_bh *)rq->special); goto out; } if (rq->cmd[0] & REQ_IDETAPE_READ_BUFFER) { @@ -1647,7 +1678,7 @@ out: } /* Pipeline related functions */ -static inline int idetape_pipeline_active (idetape_tape_t *tape) +static inline int idetape_pipeline_active(idetape_tape_t *tape) { int rc1, rc2; @@ -1668,22 +1699,26 @@ static inline int idetape_pipeline_active (idetape_tape_t *tape) * Pipeline stages are optional and are used to increase performance. If we * can't allocate them, we'll manage without them. */ -static idetape_stage_t *__idetape_kmalloc_stage (idetape_tape_t *tape, int full, int clear) +static idetape_stage_t *__idetape_kmalloc_stage(idetape_tape_t *tape, int full, + int clear) { idetape_stage_t *stage; struct idetape_bh *prev_bh, *bh; int pages = tape->pages_per_stage; char *b_data = NULL; - if ((stage = kmalloc(sizeof (idetape_stage_t),GFP_KERNEL)) == NULL) + stage = kmalloc(sizeof(idetape_stage_t), GFP_KERNEL); + if (!stage) return NULL; stage->next = NULL; - bh = stage->bh = kmalloc(sizeof(struct idetape_bh), GFP_KERNEL); + stage->bh = kmalloc(sizeof(struct idetape_bh), GFP_KERNEL); + bh = stage->bh; if (bh == NULL) goto abort; bh->b_reqnext = NULL; - if ((bh->b_data = (char *) __get_free_page (GFP_KERNEL)) == NULL) + bh->b_data = (char *) __get_free_page(GFP_KERNEL); + if (!bh->b_data) goto abort; if (clear) memset(bh->b_data, 0, PAGE_SIZE); @@ -1691,7 +1726,8 @@ static idetape_stage_t *__idetape_kmalloc_stage (idetape_tape_t *tape, int full, atomic_set(&bh->b_count, full ? bh->b_size : 0); while (--pages) { - if ((b_data = (char *) __get_free_page (GFP_KERNEL)) == NULL) + b_data = (char *) __get_free_page(GFP_KERNEL); + if (!b_data) goto abort; if (clear) memset(b_data, 0, PAGE_SIZE); @@ -1709,7 +1745,8 @@ static idetape_stage_t *__idetape_kmalloc_stage (idetape_tape_t *tape, int full, continue; } prev_bh = bh; - if ((bh = kmalloc(sizeof(struct idetape_bh), GFP_KERNEL)) == NULL) { + bh = kmalloc(sizeof(struct idetape_bh), GFP_KERNEL); + if (!bh) { free_page((unsigned long) b_data); goto abort; } @@ -1728,7 +1765,7 @@ abort: return NULL; } -static idetape_stage_t *idetape_kmalloc_stage (idetape_tape_t *tape) +static idetape_stage_t *idetape_kmalloc_stage(idetape_tape_t *tape) { idetape_stage_t *cache_stage = tape->cache_stage; @@ -1743,7 +1780,8 @@ static idetape_stage_t *idetape_kmalloc_stage (idetape_tape_t *tape) return __idetape_kmalloc_stage(tape, 0, 0); } -static int idetape_copy_stage_from_user (idetape_tape_t *tape, idetape_stage_t *stage, const char __user *buf, int n) +static int idetape_copy_stage_from_user(idetape_tape_t *tape, + idetape_stage_t *stage, const char __user *buf, int n) { struct idetape_bh *bh = tape->bh; int count; @@ -1751,12 +1789,15 @@ static int idetape_copy_stage_from_user (idetape_tape_t *tape, idetape_stage_t * while (n) { if (bh == NULL) { - printk(KERN_ERR "ide-tape: bh == NULL in " - "idetape_copy_stage_from_user\n"); + printk(KERN_ERR "ide-tape: bh == NULL in %s\n", + __func__); return 1; } - count = min((unsigned int)(bh->b_size - atomic_read(&bh->b_count)), (unsigned int)n); - if (copy_from_user(bh->b_data + atomic_read(&bh->b_count), buf, count)) + count = min((unsigned int) + (bh->b_size - atomic_read(&bh->b_count)), + (unsigned int)n); + if (copy_from_user(bh->b_data + atomic_read(&bh->b_count), buf, + count)) ret = 1; n -= count; atomic_add(count, &bh->b_count); @@ -1771,7 +1812,8 @@ static int idetape_copy_stage_from_user (idetape_tape_t *tape, idetape_stage_t * return ret; } -static int idetape_copy_stage_to_user (idetape_tape_t *tape, char __user *buf, idetape_stage_t *stage, int n) +static int idetape_copy_stage_to_user(idetape_tape_t *tape, char __user *buf, + idetape_stage_t *stage, int n) { struct idetape_bh *bh = tape->bh; int count; @@ -1779,8 +1821,8 @@ static int idetape_copy_stage_to_user (idetape_tape_t *tape, char __user *buf, i while (n) { if (bh == NULL) { - printk(KERN_ERR "ide-tape: bh == NULL in " - "idetape_copy_stage_to_user\n"); + printk(KERN_ERR "ide-tape: bh == NULL in %s\n", + __func__); return 1; } count = min(tape->b_count, n); @@ -1791,7 +1833,8 @@ static int idetape_copy_stage_to_user (idetape_tape_t *tape, char __user *buf, i tape->b_count -= count; buf += count; if (!tape->b_count) { - tape->bh = bh = bh->b_reqnext; + bh = bh->b_reqnext; + tape->bh = bh; if (bh) { tape->b_data = bh->b_data; tape->b_count = atomic_read(&bh->b_count); @@ -1801,10 +1844,10 @@ static int idetape_copy_stage_to_user (idetape_tape_t *tape, char __user *buf, i return ret; } -static void idetape_init_merge_stage (idetape_tape_t *tape) +static void idetape_init_merge_stage(idetape_tape_t *tape) { struct idetape_bh *bh = tape->merge_stage->bh; - + tape->bh = bh; if (tape->chrdev_dir == IDETAPE_DIR_WRITE) atomic_set(&bh->b_count, 0); @@ -1814,7 +1857,7 @@ static void idetape_init_merge_stage (idetape_tape_t *tape) } } -static void idetape_switch_buffers (idetape_tape_t *tape, idetape_stage_t *stage) +static void idetape_switch_buffers(idetape_tape_t *tape, idetape_stage_t *stage) { struct idetape_bh *tmp; @@ -1825,7 +1868,7 @@ static void idetape_switch_buffers (idetape_tape_t *tape, idetape_stage_t *stage } /* Add a new stage at the end of the pipeline. */ -static void idetape_add_stage_tail (ide_drive_t *drive,idetape_stage_t *stage) +static void idetape_add_stage_tail(ide_drive_t *drive, idetape_stage_t *stage) { idetape_tape_t *tape = drive->driver_data; unsigned long flags; @@ -1835,9 +1878,10 @@ static void idetape_add_stage_tail (ide_drive_t *drive,idetape_stage_t *stage) spin_lock_irqsave(&tape->lock, flags); stage->next = NULL; if (tape->last_stage != NULL) - tape->last_stage->next=stage; + tape->last_stage->next = stage; else - tape->first_stage = tape->next_stage=stage; + tape->first_stage = stage; + tape->next_stage = stage; tape->last_stage = stage; if (tape->next_stage == NULL) tape->next_stage = tape->last_stage; @@ -1850,13 +1894,14 @@ static void idetape_add_stage_tail (ide_drive_t *drive,idetape_stage_t *stage) * caller should ensure that the request will not be serviced before we install * the completion (usually by disabling interrupts). */ -static void idetape_wait_for_request (ide_drive_t *drive, struct request *rq) +static void idetape_wait_for_request(ide_drive_t *drive, struct request *rq) { DECLARE_COMPLETION_ONSTACK(wait); idetape_tape_t *tape = drive->driver_data; if (rq == NULL || !blk_special_request(rq)) { - printk (KERN_ERR "ide-tape: bug: Trying to sleep on non-valid request\n"); + printk(KERN_ERR "ide-tape: bug: Trying to sleep on non-valid" + " request\n"); return; } rq->end_io_data = &wait; @@ -1905,7 +1950,8 @@ static ide_startstop_t idetape_read_position_callback(ide_drive_t *drive) * Write a filemark if write_filemark=1. Flush the device buffers without * writing a filemark otherwise. */ -static void idetape_create_write_filemark_cmd (ide_drive_t *drive, idetape_pc_t *pc,int write_filemark) +static void idetape_create_write_filemark_cmd(ide_drive_t *drive, + idetape_pc_t *pc, int write_filemark) { idetape_init_pc(pc); pc->c[0] = WRITE_FILEMARKS; @@ -1934,7 +1980,7 @@ static void idetape_create_test_unit_ready_cmd(idetape_pc_t *pc) * to the request list without waiting for it to be serviced! In that case, we * usually use idetape_queue_pc_head(). */ -static int __idetape_queue_pc_tail (ide_drive_t *drive, idetape_pc_t *pc) +static int __idetape_queue_pc_tail(ide_drive_t *drive, idetape_pc_t *pc) { struct ide_tape_obj *tape = drive->driver_data; struct request rq; @@ -1945,7 +1991,8 @@ static int __idetape_queue_pc_tail (ide_drive_t *drive, idetape_pc_t *pc) return ide_do_drive_cmd(drive, &rq, ide_wait); } -static void idetape_create_load_unload_cmd (ide_drive_t *drive, idetape_pc_t *pc,int cmd) +static void idetape_create_load_unload_cmd(ide_drive_t *drive, idetape_pc_t *pc, + int cmd) { idetape_init_pc(pc); pc->c[0] = START_STOP; @@ -1972,7 +2019,8 @@ static int idetape_wait_ready(ide_drive_t *drive, unsigned long timeout) /* no media */ if (load_attempted) return -ENOMEDIUM; - idetape_create_load_unload_cmd(drive, &pc, IDETAPE_LU_LOAD_MASK); + idetape_create_load_unload_cmd(drive, &pc, + IDETAPE_LU_LOAD_MASK); __idetape_queue_pc_tail(drive, &pc); load_attempted = 1; /* not about to be ready */ @@ -1984,24 +2032,25 @@ static int idetape_wait_ready(ide_drive_t *drive, unsigned long timeout) return -EIO; } -static int idetape_queue_pc_tail (ide_drive_t *drive,idetape_pc_t *pc) +static int idetape_queue_pc_tail(ide_drive_t *drive, idetape_pc_t *pc) { return __idetape_queue_pc_tail(drive, pc); } -static int idetape_flush_tape_buffers (ide_drive_t *drive) +static int idetape_flush_tape_buffers(ide_drive_t *drive) { idetape_pc_t pc; int rc; idetape_create_write_filemark_cmd(drive, &pc, 0); - if ((rc = idetape_queue_pc_tail(drive, &pc))) + rc = idetape_queue_pc_tail(drive, &pc); + if (rc) return rc; idetape_wait_ready(drive, 60 * 5 * HZ); return 0; } -static void idetape_create_read_position_cmd (idetape_pc_t *pc) +static void idetape_create_read_position_cmd(idetape_pc_t *pc) { idetape_init_pc(pc); pc->c[0] = READ_POSITION; @@ -2009,7 +2058,7 @@ static void idetape_create_read_position_cmd (idetape_pc_t *pc) pc->callback = &idetape_read_position_callback; } -static int idetape_read_position (ide_drive_t *drive) +static int idetape_read_position(ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; idetape_pc_t pc; @@ -2024,7 +2073,8 @@ static int idetape_read_position (ide_drive_t *drive) return position; } -static void idetape_create_locate_cmd (ide_drive_t *drive, idetape_pc_t *pc, unsigned int block, u8 partition, int skip) +static void idetape_create_locate_cmd(ide_drive_t *drive, idetape_pc_t *pc, + unsigned int block, u8 partition, int skip) { idetape_init_pc(pc); pc->c[0] = POSITION_TO_ELEMENT; @@ -2035,7 +2085,8 @@ static void idetape_create_locate_cmd (ide_drive_t *drive, idetape_pc_t *pc, uns pc->callback = &idetape_pc_callback; } -static int idetape_create_prevent_cmd (ide_drive_t *drive, idetape_pc_t *pc, int prevent) +static int idetape_create_prevent_cmd(ide_drive_t *drive, idetape_pc_t *pc, + int prevent) { idetape_tape_t *tape = drive->driver_data; @@ -2050,7 +2101,7 @@ static int idetape_create_prevent_cmd (ide_drive_t *drive, idetape_pc_t *pc, int return 1; } -static int __idetape_discard_read_pipeline (ide_drive_t *drive) +static int __idetape_discard_read_pipeline(ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; unsigned long flags; @@ -2086,7 +2137,7 @@ static int __idetape_discard_read_pipeline (ide_drive_t *drive) while (tape->first_stage != NULL) { struct request *rq_ptr = &tape->first_stage->rq; - cnt += rq_ptr->nr_sectors - rq_ptr->current_nr_sectors; + cnt += rq_ptr->nr_sectors - rq_ptr->current_nr_sectors; if (rq_ptr->errors == IDETAPE_ERROR_FILEMARK) ++cnt; idetape_remove_stage_head(drive); @@ -2102,7 +2153,8 @@ static int __idetape_discard_read_pipeline (ide_drive_t *drive) * all higher level operations, we queue the commands at the tail of the request * queue and wait for their completion. */ -static int idetape_position_tape (ide_drive_t *drive, unsigned int block, u8 partition, int skip) +static int idetape_position_tape(ide_drive_t *drive, unsigned int block, + u8 partition, int skip) { idetape_tape_t *tape = drive->driver_data; int retval; @@ -2120,7 +2172,8 @@ static int idetape_position_tape (ide_drive_t *drive, unsigned int block, u8 par return (idetape_queue_pc_tail(drive, &pc)); } -static void idetape_discard_read_pipeline (ide_drive_t *drive, int restore_position) +static void idetape_discard_read_pipeline(ide_drive_t *drive, + int restore_position) { idetape_tape_t *tape = drive->driver_data; int cnt; @@ -2131,7 +2184,8 @@ static void idetape_discard_read_pipeline (ide_drive_t *drive, int restore_posit position = idetape_read_position(drive); seek = position > cnt ? position - cnt : 0; if (idetape_position_tape(drive, seek, 0, 0)) { - printk(KERN_INFO "ide-tape: %s: position_tape failed in discard_pipeline()\n", tape->name); + printk(KERN_INFO "ide-tape: %s: position_tape failed in" + " discard_pipeline()\n", tape->name); return; } } @@ -2141,7 +2195,8 @@ static void idetape_discard_read_pipeline (ide_drive_t *drive, int restore_posit * Generate a read/write request for the block device interface and wait for it * to be serviced. */ -static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int blocks, struct idetape_bh *bh) +static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int blocks, + struct idetape_bh *bh) { idetape_tape_t *tape = drive->driver_data; struct request rq; @@ -2158,7 +2213,8 @@ static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int blocks, struct rq.rq_disk = tape->disk; rq.special = (void *)bh; rq.sector = tape->first_frame; - rq.nr_sectors = rq.current_nr_sectors = blocks; + rq.nr_sectors = blocks; + rq.current_nr_sectors = blocks; (void) ide_do_drive_cmd(drive, &rq, ide_wait); if ((cmd & (REQ_IDETAPE_READ | REQ_IDETAPE_WRITE)) == 0) @@ -2185,15 +2241,16 @@ static void idetape_plug_pipeline(ide_drive_t *drive) } } -static void idetape_create_inquiry_cmd (idetape_pc_t *pc) +static void idetape_create_inquiry_cmd(idetape_pc_t *pc) { idetape_init_pc(pc); pc->c[0] = INQUIRY; - pc->c[4] = pc->request_transfer = 254; + pc->c[4] = 254; + pc->request_transfer = 254; pc->callback = &idetape_pc_callback; } -static void idetape_create_rewind_cmd (ide_drive_t *drive, idetape_pc_t *pc) +static void idetape_create_rewind_cmd(ide_drive_t *drive, idetape_pc_t *pc) { idetape_init_pc(pc); pc->c[0] = REZERO_UNIT; @@ -2201,7 +2258,7 @@ static void idetape_create_rewind_cmd (ide_drive_t *drive, idetape_pc_t *pc) pc->callback = &idetape_pc_callback; } -static void idetape_create_erase_cmd (idetape_pc_t *pc) +static void idetape_create_erase_cmd(idetape_pc_t *pc) { idetape_init_pc(pc); pc->c[0] = ERASE; @@ -2210,7 +2267,7 @@ static void idetape_create_erase_cmd (idetape_pc_t *pc) pc->callback = &idetape_pc_callback; } -static void idetape_create_space_cmd (idetape_pc_t *pc,int count, u8 cmd) +static void idetape_create_space_cmd(idetape_pc_t *pc, int count, u8 cmd) { idetape_init_pc(pc); pc->c[0] = SPACE; @@ -2220,7 +2277,7 @@ static void idetape_create_space_cmd (idetape_pc_t *pc,int count, u8 cmd) pc->callback = &idetape_pc_callback; } -static void idetape_wait_first_stage (ide_drive_t *drive) +static void idetape_wait_first_stage(ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; unsigned long flags; @@ -2244,7 +2301,7 @@ static void idetape_wait_first_stage (ide_drive_t *drive) * 3. If we still can't allocate a stage, fallback to non-pipelined operation * mode for this request. */ -static int idetape_add_chrdev_write_request (ide_drive_t *drive, int blocks) +static int idetape_add_chrdev_write_request(ide_drive_t *drive, int blocks) { idetape_tape_t *tape = drive->driver_data; idetape_stage_t *new_stage; @@ -2268,14 +2325,16 @@ static int idetape_add_chrdev_write_request (ide_drive_t *drive, int blocks) * The machine is short on memory. Fallback to non- * pipelined operation mode for this request. */ - return idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, blocks, tape->merge_stage->bh); + return idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, + blocks, tape->merge_stage->bh); } } rq = &new_stage->rq; idetape_init_rq(rq, REQ_IDETAPE_WRITE); /* Doesn't actually matter - We always assume sequential access */ rq->sector = tape->first_frame; - rq->nr_sectors = rq->current_nr_sectors = blocks; + rq->current_nr_sectors = blocks; + rq->nr_sectors = blocks; idetape_switch_buffers(tape, new_stage); idetape_add_stage_tail(drive, new_stage); @@ -2311,7 +2370,7 @@ static int idetape_add_chrdev_write_request (ide_drive_t *drive, int blocks) * Wait until all pending pipeline requests are serviced. Typically called on * device close. */ -static void idetape_wait_for_pipeline (ide_drive_t *drive) +static void idetape_wait_for_pipeline(ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; unsigned long flags; @@ -2325,14 +2384,15 @@ static void idetape_wait_for_pipeline (ide_drive_t *drive) } } -static void idetape_empty_write_pipeline (ide_drive_t *drive) +static void idetape_empty_write_pipeline(ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; int blocks, min; struct idetape_bh *bh; if (tape->chrdev_dir != IDETAPE_DIR_WRITE) { - printk(KERN_ERR "ide-tape: bug: Trying to empty write pipeline, but we are not writing.\n"); + printk(KERN_ERR "ide-tape: bug: Trying to empty write pipeline," + " but we are not writing.\n"); return; } if (tape->merge_stage_size > tape->stage_size) { @@ -2355,12 +2415,14 @@ static void idetape_empty_write_pipeline (ide_drive_t *drive) bh = tape->bh; while (i) { if (bh == NULL) { - - printk(KERN_INFO "ide-tape: bug, bh NULL\n"); + printk(KERN_INFO "ide-tape: bug," + " bh NULL\n"); break; } - min = min(i, (unsigned int)(bh->b_size - atomic_read(&bh->b_count))); - memset(bh->b_data + atomic_read(&bh->b_count), 0, min); + min = min(i, (unsigned int)(bh->b_size - + atomic_read(&bh->b_count))); + memset(bh->b_data + atomic_read(&bh->b_count), + 0, min); atomic_add(min, &bh->b_count); i -= min; bh = bh->b_reqnext; @@ -2396,18 +2458,22 @@ static void idetape_empty_write_pipeline (ide_drive_t *drive) } } -static void idetape_restart_speed_control (ide_drive_t *drive) +static void idetape_restart_speed_control(ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; tape->restart_speed_control_req = 0; tape->pipeline_head = 0; tape->controlled_last_pipeline_head = 0; - tape->controlled_previous_pipeline_head = tape->uncontrolled_previous_pipeline_head = 0; - tape->pipeline_head_speed = tape->controlled_pipeline_head_speed = 5000; + tape->controlled_previous_pipeline_head = 0; + tape->uncontrolled_previous_pipeline_head = 0; + tape->controlled_pipeline_head_speed = 5000; + tape->pipeline_head_speed = 5000; tape->uncontrolled_pipeline_head_speed = 0; - tape->controlled_pipeline_head_time = tape->uncontrolled_pipeline_head_time = jiffies; - tape->controlled_previous_head_time = tape->uncontrolled_previous_head_time = jiffies; + tape->controlled_pipeline_head_time = + tape->uncontrolled_pipeline_head_time = jiffies; + tape->controlled_previous_head_time = + tape->uncontrolled_previous_head_time = jiffies; } static int idetape_init_read(ide_drive_t *drive, int max_stages) @@ -2425,10 +2491,12 @@ static int idetape_init_read(ide_drive_t *drive, int max_stages) idetape_flush_tape_buffers(drive); } if (tape->merge_stage || tape->merge_stage_size) { - printk (KERN_ERR "ide-tape: merge_stage_size should be 0 now\n"); + printk(KERN_ERR "ide-tape: merge_stage_size should be" + " 0 now\n"); tape->merge_stage_size = 0; } - if ((tape->merge_stage = __idetape_kmalloc_stage(tape, 0, 0)) == NULL) + tape->merge_stage = __idetape_kmalloc_stage(tape, 0, 0); + if (!tape->merge_stage) return -ENOMEM; tape->chrdev_dir = IDETAPE_DIR_READ; @@ -2439,7 +2507,9 @@ static int idetape_init_read(ide_drive_t *drive, int max_stages) * drives (Seagate STT3401A) will return an error. */ if (drive->dsc_overlap) { - bytes_read = idetape_queue_rw_tail(drive, REQ_IDETAPE_READ, 0, tape->merge_stage->bh); + bytes_read = idetape_queue_rw_tail(drive, + REQ_IDETAPE_READ, 0, + tape->merge_stage->bh); if (bytes_read < 0) { __idetape_kfree_stage(tape->merge_stage); tape->merge_stage = NULL; @@ -2452,7 +2522,8 @@ static int idetape_init_read(ide_drive_t *drive, int max_stages) idetape_restart_speed_control(drive); idetape_init_rq(&rq, REQ_IDETAPE_READ); rq.sector = tape->first_frame; - rq.nr_sectors = rq.current_nr_sectors = blocks; + rq.nr_sectors = blocks; + rq.current_nr_sectors = blocks; if (!test_bit(IDETAPE_PIPELINE_ERROR, &tape->flags) && tape->nr_stages < max_stages) { new_stage = idetape_kmalloc_stage(tape); @@ -2480,7 +2551,7 @@ static int idetape_init_read(ide_drive_t *drive, int max_stages) * Called from idetape_chrdev_read() to service a character device read request * and add read-ahead requests to our pipeline. */ -static int idetape_add_chrdev_read_request (ide_drive_t *drive,int blocks) +static int idetape_add_chrdev_read_request(ide_drive_t *drive, int blocks) { idetape_tape_t *tape = drive->driver_data; unsigned long flags; @@ -2505,8 +2576,8 @@ static int idetape_add_chrdev_read_request (ide_drive_t *drive,int blocks) rq_ptr = &tape->first_stage->rq; bytes_read = tape->blk_size * (rq_ptr->nr_sectors - rq_ptr->current_nr_sectors); - rq_ptr->nr_sectors = rq_ptr->current_nr_sectors = 0; - + rq_ptr->nr_sectors = 0; + rq_ptr->current_nr_sectors = 0; if (rq_ptr->errors == IDETAPE_ERROR_EOD) return 0; @@ -2521,13 +2592,14 @@ static int idetape_add_chrdev_read_request (ide_drive_t *drive,int blocks) idetape_calculate_speeds(drive); } if (bytes_read > blocks * tape->blk_size) { - printk(KERN_ERR "ide-tape: bug: trying to return more bytes than requested\n"); + printk(KERN_ERR "ide-tape: bug: trying to return more bytes" + " than requested\n"); bytes_read = blocks * tape->blk_size; } return (bytes_read); } -static void idetape_pad_zeros (ide_drive_t *drive, int bcount) +static void idetape_pad_zeros(ide_drive_t *drive, int bcount) { idetape_tape_t *tape = drive->driver_data; struct idetape_bh *bh; @@ -2541,16 +2613,18 @@ static void idetape_pad_zeros (ide_drive_t *drive, int bcount) bcount -= count; blocks = count / tape->blk_size; while (count) { - atomic_set(&bh->b_count, min(count, (unsigned int)bh->b_size)); + atomic_set(&bh->b_count, + min(count, (unsigned int)bh->b_size)); memset(bh->b_data, 0, atomic_read(&bh->b_count)); count -= atomic_read(&bh->b_count); bh = bh->b_reqnext; } - idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, blocks, tape->merge_stage->bh); + idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, blocks, + tape->merge_stage->bh); } } -static int idetape_pipeline_size (ide_drive_t *drive) +static int idetape_pipeline_size(ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; idetape_stage_t *stage; @@ -2575,7 +2649,7 @@ static int idetape_pipeline_size (ide_drive_t *drive) * Rewinds the tape to the Beginning Of the current Partition (BOP). We * currently support only one partition. */ -static int idetape_rewind_tape (ide_drive_t *drive) +static int idetape_rewind_tape(ide_drive_t *drive) { int retval; idetape_pc_t pc; @@ -2597,7 +2671,8 @@ static int idetape_rewind_tape (ide_drive_t *drive) } /* mtio.h compatible commands should be issued to the chrdev interface. */ -static int idetape_blkdev_ioctl(ide_drive_t *drive, unsigned int cmd, unsigned long arg) +static int idetape_blkdev_ioctl(ide_drive_t *drive, unsigned int cmd, + unsigned long arg) { idetape_tape_t *tape = drive->driver_data; void __user *argp = (void __user *)arg; @@ -2611,20 +2686,20 @@ static int idetape_blkdev_ioctl(ide_drive_t *drive, unsigned int cmd, unsigned l debug_log(DBG_PROCS, "Enter %s\n", __func__); switch (cmd) { - case 0x0340: - if (copy_from_user(&config, argp, sizeof(config))) - return -EFAULT; - tape->best_dsc_rw_freq = config.dsc_rw_frequency; - tape->max_stages = config.nr_stages; - break; - case 0x0350: - config.dsc_rw_frequency = (int) tape->best_dsc_rw_freq; - config.nr_stages = tape->max_stages; - if (copy_to_user(argp, &config, sizeof(config))) - return -EFAULT; - break; - default: - return -EIO; + case 0x0340: + if (copy_from_user(&config, argp, sizeof(config))) + return -EFAULT; + tape->best_dsc_rw_freq = config.dsc_rw_frequency; + tape->max_stages = config.nr_stages; + break; + case 0x0350: + config.dsc_rw_frequency = (int) tape->best_dsc_rw_freq; + config.nr_stages = tape->max_stages; + if (copy_to_user(argp, &config, sizeof(config))) + return -EFAULT; + break; + default: + return -EIO; } return 0; } @@ -2636,12 +2711,13 @@ static int idetape_blkdev_ioctl(ide_drive_t *drive, unsigned int cmd, unsigned l * support MTFSFM when the filemark is in our internal pipeline even if the tape * doesn't support spacing over filemarks in the reverse direction. */ -static int idetape_space_over_filemarks (ide_drive_t *drive,short mt_op,int mt_count) +static int idetape_space_over_filemarks(ide_drive_t *drive, short mt_op, + int mt_count) { idetape_tape_t *tape = drive->driver_data; idetape_pc_t pc; unsigned long flags; - int retval,count=0; + int retval, count = 0; int sprev = !!(tape->caps[4] & 0x20); if (mt_count == 0) @@ -2649,7 +2725,7 @@ static int idetape_space_over_filemarks (ide_drive_t *drive,short mt_op,int mt_c if (MTBSF == mt_op || MTBSFM == mt_op) { if (!sprev) return -EIO; - mt_count = - mt_count; + mt_count = -mt_count; } if (tape->chrdev_dir == IDETAPE_DIR_READ) { @@ -2682,7 +2758,8 @@ static int idetape_space_over_filemarks (ide_drive_t *drive,short mt_op,int mt_c tape->next_stage = tape->first_stage->next; } else spin_unlock_irqrestore(&tape->lock, flags); - if (tape->first_stage->rq.errors == IDETAPE_ERROR_FILEMARK) + if (tape->first_stage->rq.errors == + IDETAPE_ERROR_FILEMARK) ++count; idetape_remove_stage_head(drive); } @@ -2694,25 +2771,28 @@ static int idetape_space_over_filemarks (ide_drive_t *drive,short mt_op,int mt_c * the space command. */ switch (mt_op) { - case MTFSF: - case MTBSF: - idetape_create_space_cmd(&pc,mt_count-count,IDETAPE_SPACE_OVER_FILEMARK); - return (idetape_queue_pc_tail(drive, &pc)); - case MTFSFM: - case MTBSFM: - if (!sprev) - return (-EIO); - retval = idetape_space_over_filemarks(drive, MTFSF, mt_count-count); - if (retval) return (retval); - count = (MTBSFM == mt_op ? 1 : -1); - return (idetape_space_over_filemarks(drive, MTFSF, count)); - default: - printk(KERN_ERR "ide-tape: MTIO operation %d not supported\n",mt_op); - return (-EIO); + case MTFSF: + case MTBSF: + idetape_create_space_cmd(&pc, mt_count - count, + IDETAPE_SPACE_OVER_FILEMARK); + return idetape_queue_pc_tail(drive, &pc); + case MTFSFM: + case MTBSFM: + if (!sprev) + return -EIO; + retval = idetape_space_over_filemarks(drive, MTFSF, + mt_count - count); + if (retval) + return retval; + count = (MTBSFM == mt_op ? 1 : -1); + return idetape_space_over_filemarks(drive, MTFSF, count); + default: + printk(KERN_ERR "ide-tape: MTIO operation %d not supported\n", + mt_op); + return -EIO; } } - /* * Our character device read / write functions. * @@ -2728,12 +2808,12 @@ static int idetape_space_over_filemarks (ide_drive_t *drive,short mt_op,int mt_c * (slightly) increased driver overhead, but will no longer hit performance. * This is not applicable to Onstream. */ -static ssize_t idetape_chrdev_read (struct file *file, char __user *buf, - size_t count, loff_t *ppos) +static ssize_t idetape_chrdev_read(struct file *file, char __user *buf, + size_t count, loff_t *ppos) { struct ide_tape_obj *tape = ide_tape_f(file); ide_drive_t *drive = tape->drive; - ssize_t bytes_read,temp, actually_read = 0, rc; + ssize_t bytes_read, temp, actually_read = 0, rc; ssize_t ret = 0; u16 ctl = *(u16 *)&tape->caps[12]; @@ -2751,8 +2831,10 @@ static ssize_t idetape_chrdev_read (struct file *file, char __user *buf, if (count == 0) return (0); if (tape->merge_stage_size) { - actually_read = min((unsigned int)(tape->merge_stage_size), (unsigned int)count); - if (idetape_copy_stage_to_user(tape, buf, tape->merge_stage, actually_read)) + actually_read = min((unsigned int)(tape->merge_stage_size), + (unsigned int)count); + if (idetape_copy_stage_to_user(tape, buf, tape->merge_stage, + actually_read)) ret = -EFAULT; buf += actually_read; tape->merge_stage_size -= actually_read; @@ -2762,7 +2844,8 @@ static ssize_t idetape_chrdev_read (struct file *file, char __user *buf, bytes_read = idetape_add_chrdev_read_request(drive, ctl); if (bytes_read <= 0) goto finish; - if (idetape_copy_stage_to_user(tape, buf, tape->merge_stage, bytes_read)) + if (idetape_copy_stage_to_user(tape, buf, tape->merge_stage, + bytes_read)) ret = -EFAULT; buf += bytes_read; count -= bytes_read; @@ -2773,7 +2856,8 @@ static ssize_t idetape_chrdev_read (struct file *file, char __user *buf, if (bytes_read <= 0) goto finish; temp = min((unsigned long)count, (unsigned long)bytes_read); - if (idetape_copy_stage_to_user(tape, buf, tape->merge_stage, temp)) + if (idetape_copy_stage_to_user(tape, buf, tape->merge_stage, + temp)) ret = -EFAULT; actually_read += temp; tape->merge_stage_size = bytes_read-temp; @@ -2786,10 +2870,10 @@ finish: return 0; } - return (ret) ? ret : actually_read; + return ret ? ret : actually_read; } -static ssize_t idetape_chrdev_write (struct file *file, const char __user *buf, +static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos) { struct ide_tape_obj *tape = ide_tape_f(file); @@ -2813,7 +2897,8 @@ static ssize_t idetape_chrdev_write (struct file *file, const char __user *buf, "should be 0 now\n"); tape->merge_stage_size = 0; } - if ((tape->merge_stage = __idetape_kmalloc_stage(tape, 0, 0)) == NULL) + tape->merge_stage = __idetape_kmalloc_stage(tape, 0, 0); + if (!tape->merge_stage) return -ENOMEM; tape->chrdev_dir = IDETAPE_DIR_WRITE; idetape_init_merge_stage(tape); @@ -2825,7 +2910,9 @@ static ssize_t idetape_chrdev_write (struct file *file, const char __user *buf, * drives (Seagate STT3401A) will return an error. */ if (drive->dsc_overlap) { - ssize_t retval = idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, 0, tape->merge_stage->bh); + ssize_t retval = idetape_queue_rw_tail(drive, + REQ_IDETAPE_WRITE, 0, + tape->merge_stage->bh); if (retval < 0) { __idetape_kfree_stage(tape->merge_stage); tape->merge_stage = NULL; @@ -2840,11 +2927,14 @@ static ssize_t idetape_chrdev_write (struct file *file, const char __user *buf, idetape_restart_speed_control(drive); if (tape->merge_stage_size) { if (tape->merge_stage_size >= tape->stage_size) { - printk(KERN_ERR "ide-tape: bug: merge buffer too big\n"); + printk(KERN_ERR "ide-tape: bug: merge buf too big\n"); tape->merge_stage_size = 0; } - actually_written = min((unsigned int)(tape->stage_size - tape->merge_stage_size), (unsigned int)count); - if (idetape_copy_stage_from_user(tape, tape->merge_stage, buf, actually_written)) + actually_written = min((unsigned int) + (tape->stage_size - tape->merge_stage_size), + (unsigned int)count); + if (idetape_copy_stage_from_user(tape, tape->merge_stage, buf, + actually_written)) ret = -EFAULT; buf += actually_written; tape->merge_stage_size += actually_written; @@ -2860,7 +2950,8 @@ static ssize_t idetape_chrdev_write (struct file *file, const char __user *buf, } while (count >= tape->stage_size) { ssize_t retval; - if (idetape_copy_stage_from_user(tape, tape->merge_stage, buf, tape->stage_size)) + if (idetape_copy_stage_from_user(tape, tape->merge_stage, buf, + tape->stage_size)) ret = -EFAULT; buf += tape->stage_size; count -= tape->stage_size; @@ -2871,14 +2962,15 @@ static ssize_t idetape_chrdev_write (struct file *file, const char __user *buf, } if (count) { actually_written += count; - if (idetape_copy_stage_from_user(tape, tape->merge_stage, buf, count)) + if (idetape_copy_stage_from_user(tape, tape->merge_stage, buf, + count)) ret = -EFAULT; tape->merge_stage_size += count; } - return (ret) ? ret : actually_written; + return ret ? ret : actually_written; } -static int idetape_write_filemark (ide_drive_t *drive) +static int idetape_write_filemark(ide_drive_t *drive) { idetape_pc_t pc; @@ -2909,110 +3001,117 @@ static int idetape_mtioctop(ide_drive_t *drive, short mt_op, int mt_count) { idetape_tape_t *tape = drive->driver_data; idetape_pc_t pc; - int i,retval; + int i, retval; debug_log(DBG_ERR, "Handling MTIOCTOP ioctl: mt_op=%d, mt_count=%d\n", mt_op, mt_count); + /* Commands which need our pipelined read-ahead stages. */ switch (mt_op) { - case MTFSF: - case MTFSFM: - case MTBSF: - case MTBSFM: - if (!mt_count) - return (0); - return (idetape_space_over_filemarks(drive,mt_op,mt_count)); - default: - break; + case MTFSF: + case MTFSFM: + case MTBSF: + case MTBSFM: + if (!mt_count) + return 0; + return idetape_space_over_filemarks(drive, mt_op, mt_count); + default: + break; } + switch (mt_op) { - case MTWEOF: - if (tape->write_prot) - return -EACCES; - idetape_discard_read_pipeline(drive, 1); - for (i = 0; i < mt_count; i++) { - retval = idetape_write_filemark(drive); - if (retval) - return retval; - } - return (0); - case MTREW: - idetape_discard_read_pipeline(drive, 0); - if (idetape_rewind_tape(drive)) + case MTWEOF: + if (tape->write_prot) + return -EACCES; + idetape_discard_read_pipeline(drive, 1); + for (i = 0; i < mt_count; i++) { + retval = idetape_write_filemark(drive); + if (retval) + return retval; + } + return 0; + case MTREW: + idetape_discard_read_pipeline(drive, 0); + if (idetape_rewind_tape(drive)) + return -EIO; + return 0; + case MTLOAD: + idetape_discard_read_pipeline(drive, 0); + idetape_create_load_unload_cmd(drive, &pc, + IDETAPE_LU_LOAD_MASK); + return idetape_queue_pc_tail(drive, &pc); + case MTUNLOAD: + case MTOFFL: + /* + * If door is locked, attempt to unlock before + * attempting to eject. + */ + if (tape->door_locked) { + if (idetape_create_prevent_cmd(drive, &pc, 0)) + if (!idetape_queue_pc_tail(drive, &pc)) + tape->door_locked = DOOR_UNLOCKED; + } + idetape_discard_read_pipeline(drive, 0); + idetape_create_load_unload_cmd(drive, &pc, + !IDETAPE_LU_LOAD_MASK); + retval = idetape_queue_pc_tail(drive, &pc); + if (!retval) + clear_bit(IDETAPE_MEDIUM_PRESENT, &tape->flags); + return retval; + case MTNOP: + idetape_discard_read_pipeline(drive, 0); + return idetape_flush_tape_buffers(drive); + case MTRETEN: + idetape_discard_read_pipeline(drive, 0); + idetape_create_load_unload_cmd(drive, &pc, + IDETAPE_LU_RETENSION_MASK | IDETAPE_LU_LOAD_MASK); + return idetape_queue_pc_tail(drive, &pc); + case MTEOM: + idetape_create_space_cmd(&pc, 0, IDETAPE_SPACE_TO_EOD); + return idetape_queue_pc_tail(drive, &pc); + case MTERASE: + (void)idetape_rewind_tape(drive); + idetape_create_erase_cmd(&pc); + return idetape_queue_pc_tail(drive, &pc); + case MTSETBLK: + if (mt_count) { + if (mt_count < tape->blk_size || + mt_count % tape->blk_size) return -EIO; + tape->user_bs_factor = mt_count / tape->blk_size; + clear_bit(IDETAPE_DETECT_BS, &tape->flags); + } else + set_bit(IDETAPE_DETECT_BS, &tape->flags); + return 0; + case MTSEEK: + idetape_discard_read_pipeline(drive, 0); + return idetape_position_tape(drive, + mt_count * tape->user_bs_factor, tape->partition, 0); + case MTSETPART: + idetape_discard_read_pipeline(drive, 0); + return idetape_position_tape(drive, 0, mt_count, 0); + case MTFSR: + case MTBSR: + case MTLOCK: + if (!idetape_create_prevent_cmd(drive, &pc, 1)) return 0; - case MTLOAD: - idetape_discard_read_pipeline(drive, 0); - idetape_create_load_unload_cmd(drive, &pc, IDETAPE_LU_LOAD_MASK); - return (idetape_queue_pc_tail(drive, &pc)); - case MTUNLOAD: - case MTOFFL: - /* - * If door is locked, attempt to unlock before - * attempting to eject. - */ - if (tape->door_locked) { - if (idetape_create_prevent_cmd(drive, &pc, 0)) - if (!idetape_queue_pc_tail(drive, &pc)) - tape->door_locked = DOOR_UNLOCKED; - } - idetape_discard_read_pipeline(drive, 0); - idetape_create_load_unload_cmd(drive, &pc,!IDETAPE_LU_LOAD_MASK); - retval = idetape_queue_pc_tail(drive, &pc); - if (!retval) - clear_bit(IDETAPE_MEDIUM_PRESENT, &tape->flags); + retval = idetape_queue_pc_tail(drive, &pc); + if (retval) return retval; - case MTNOP: - idetape_discard_read_pipeline(drive, 0); - return (idetape_flush_tape_buffers(drive)); - case MTRETEN: - idetape_discard_read_pipeline(drive, 0); - idetape_create_load_unload_cmd(drive, &pc,IDETAPE_LU_RETENSION_MASK | IDETAPE_LU_LOAD_MASK); - return (idetape_queue_pc_tail(drive, &pc)); - case MTEOM: - idetape_create_space_cmd(&pc, 0, IDETAPE_SPACE_TO_EOD); - return (idetape_queue_pc_tail(drive, &pc)); - case MTERASE: - (void) idetape_rewind_tape(drive); - idetape_create_erase_cmd(&pc); - return (idetape_queue_pc_tail(drive, &pc)); - case MTSETBLK: - if (mt_count) { - if (mt_count < tape->blk_size || - mt_count % tape->blk_size) - return -EIO; - tape->user_bs_factor = mt_count / - tape->blk_size; - clear_bit(IDETAPE_DETECT_BS, &tape->flags); - } else - set_bit(IDETAPE_DETECT_BS, &tape->flags); - return 0; - case MTSEEK: - idetape_discard_read_pipeline(drive, 0); - return idetape_position_tape(drive, mt_count * tape->user_bs_factor, tape->partition, 0); - case MTSETPART: - idetape_discard_read_pipeline(drive, 0); - return (idetape_position_tape(drive, 0, mt_count, 0)); - case MTFSR: - case MTBSR: - case MTLOCK: - if (!idetape_create_prevent_cmd(drive, &pc, 1)) - return 0; - retval = idetape_queue_pc_tail(drive, &pc); - if (retval) return retval; - tape->door_locked = DOOR_EXPLICITLY_LOCKED; - return 0; - case MTUNLOCK: - if (!idetape_create_prevent_cmd(drive, &pc, 0)) - return 0; - retval = idetape_queue_pc_tail(drive, &pc); - if (retval) return retval; - tape->door_locked = DOOR_UNLOCKED; + tape->door_locked = DOOR_EXPLICITLY_LOCKED; + return 0; + case MTUNLOCK: + if (!idetape_create_prevent_cmd(drive, &pc, 0)) return 0; - default: - printk(KERN_ERR "ide-tape: MTIO operation %d not " - "supported\n", mt_op); - return (-EIO); + retval = idetape_queue_pc_tail(drive, &pc); + if (retval) + return retval; + tape->door_locked = DOOR_UNLOCKED; + return 0; + default: + printk(KERN_ERR "ide-tape: MTIO operation %d not supported\n", + mt_op); + return -EIO; } } @@ -3042,37 +3141,38 @@ static int idetape_chrdev_ioctl(struct inode *inode, struct file *file, if (cmd == MTIOCGET || cmd == MTIOCPOS) { block_offset = idetape_pipeline_size(drive) / (tape->blk_size * tape->user_bs_factor); - if ((position = idetape_read_position(drive)) < 0) + position = idetape_read_position(drive); + if (position < 0) return -EIO; } switch (cmd) { - case MTIOCTOP: - if (copy_from_user(&mtop, argp, sizeof (struct mtop))) - return -EFAULT; - return (idetape_mtioctop(drive,mtop.mt_op,mtop.mt_count)); - case MTIOCGET: - memset(&mtget, 0, sizeof (struct mtget)); - mtget.mt_type = MT_ISSCSI2; - mtget.mt_blkno = position / tape->user_bs_factor - block_offset; - mtget.mt_dsreg = - ((tape->blk_size * tape->user_bs_factor) - << MT_ST_BLKSIZE_SHIFT) & MT_ST_BLKSIZE_MASK; - - if (tape->drv_write_prot) { - mtget.mt_gstat |= GMT_WR_PROT(0xffffffff); - } - if (copy_to_user(argp, &mtget, sizeof(struct mtget))) - return -EFAULT; - return 0; - case MTIOCPOS: - mtpos.mt_blkno = position / tape->user_bs_factor - block_offset; - if (copy_to_user(argp, &mtpos, sizeof(struct mtpos))) - return -EFAULT; - return 0; - default: - if (tape->chrdev_dir == IDETAPE_DIR_READ) - idetape_discard_read_pipeline(drive, 1); - return idetape_blkdev_ioctl(drive, cmd, arg); + case MTIOCTOP: + if (copy_from_user(&mtop, argp, sizeof(struct mtop))) + return -EFAULT; + return idetape_mtioctop(drive, mtop.mt_op, mtop.mt_count); + case MTIOCGET: + memset(&mtget, 0, sizeof(struct mtget)); + mtget.mt_type = MT_ISSCSI2; + mtget.mt_blkno = position / tape->user_bs_factor - block_offset; + mtget.mt_dsreg = + ((tape->blk_size * tape->user_bs_factor) + << MT_ST_BLKSIZE_SHIFT) & MT_ST_BLKSIZE_MASK; + + if (tape->drv_write_prot) + mtget.mt_gstat |= GMT_WR_PROT(0xffffffff); + + if (copy_to_user(argp, &mtget, sizeof(struct mtget))) + return -EFAULT; + return 0; + case MTIOCPOS: + mtpos.mt_blkno = position / tape->user_bs_factor - block_offset; + if (copy_to_user(argp, &mtpos, sizeof(struct mtpos))) + return -EFAULT; + return 0; + default: + if (tape->chrdev_dir == IDETAPE_DIR_READ) + idetape_discard_read_pipeline(drive, 1); + return idetape_blkdev_ioctl(drive, cmd, arg); } } @@ -3101,7 +3201,7 @@ static void ide_tape_get_bsize_from_bdesc(ide_drive_t *drive) tape->drv_write_prot = (pc.buffer[2] & 0x80) >> 7; } -static int idetape_chrdev_open (struct inode *inode, struct file *filp) +static int idetape_chrdev_open(struct inode *inode, struct file *filp) { unsigned int minor = iminor(inode), i = minor & ~0xc0; ide_drive_t *drive; @@ -3185,7 +3285,7 @@ out_put_tape: return retval; } -static void idetape_write_release (ide_drive_t *drive, unsigned int minor) +static void idetape_write_release(ide_drive_t *drive, unsigned int minor) { idetape_tape_t *tape = drive->driver_data; @@ -3202,7 +3302,7 @@ static void idetape_write_release (ide_drive_t *drive, unsigned int minor) idetape_flush_tape_buffers(drive); } -static int idetape_chrdev_release (struct inode *inode, struct file *filp) +static int idetape_chrdev_release(struct inode *inode, struct file *filp) { struct ide_tape_obj *tape = ide_tape_f(filp); ide_drive_t *drive = tape->drive; @@ -3309,7 +3409,7 @@ static void idetape_get_inquiry_results(ide_drive_t *drive) * Ask the tape about its various parameters. In particular, we will adjust our * data transfer buffer size to the recommended value as returned by the tape. */ -static void idetape_get_mode_sense_results (ide_drive_t *drive) +static void idetape_get_mode_sense_results(ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; idetape_pc_t pc; @@ -3356,17 +3456,24 @@ static void idetape_get_mode_sense_results (ide_drive_t *drive) } #ifdef CONFIG_IDE_PROC_FS -static void idetape_add_settings (ide_drive_t *drive) +static void idetape_add_settings(ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; ide_add_setting(drive, "buffer", SETTING_READ, TYPE_SHORT, 0, 0xffff, 1, 2, (u16 *)&tape->caps[16], NULL); - ide_add_setting(drive, "pipeline_min", SETTING_RW, TYPE_INT, 1, 0xffff, tape->stage_size / 1024, 1, &tape->min_pipeline, NULL); - ide_add_setting(drive, "pipeline", SETTING_RW, TYPE_INT, 1, 0xffff, tape->stage_size / 1024, 1, &tape->max_stages, NULL); - ide_add_setting(drive, "pipeline_max", SETTING_RW, TYPE_INT, 1, 0xffff, tape->stage_size / 1024, 1, &tape->max_pipeline, NULL); - ide_add_setting(drive, "pipeline_used", SETTING_READ, TYPE_INT, 0, 0xffff, tape->stage_size / 1024, 1, &tape->nr_stages, NULL); - ide_add_setting(drive, "pipeline_pending", SETTING_READ, TYPE_INT, 0, 0xffff, tape->stage_size / 1024, 1, &tape->nr_pending_stages, NULL); + ide_add_setting(drive, "pipeline_min", SETTING_RW, TYPE_INT, 1, 0xffff, + tape->stage_size / 1024, 1, &tape->min_pipeline, NULL); + ide_add_setting(drive, "pipeline", SETTING_RW, TYPE_INT, 1, 0xffff, + tape->stage_size / 1024, 1, &tape->max_stages, NULL); + ide_add_setting(drive, "pipeline_max", SETTING_RW, TYPE_INT, 1, 0xffff, + tape->stage_size / 1024, 1, &tape->max_pipeline, NULL); + ide_add_setting(drive, "pipeline_used", SETTING_READ, TYPE_INT, 0, + 0xffff, tape->stage_size / 1024, 1, &tape->nr_stages, + NULL); + ide_add_setting(drive, "pipeline_pending", SETTING_READ, TYPE_INT, 0, + 0xffff, tape->stage_size / 1024, 1, + &tape->nr_pending_stages, NULL); ide_add_setting(drive, "speed", SETTING_READ, TYPE_SHORT, 0, 0xffff, 1, 1, (u16 *)&tape->caps[14], NULL); ide_add_setting(drive, "stage", SETTING_READ, TYPE_INT, 0, 0xffff, 1, @@ -3374,10 +3481,16 @@ static void idetape_add_settings (ide_drive_t *drive) ide_add_setting(drive, "tdsc", SETTING_RW, TYPE_INT, IDETAPE_DSC_RW_MIN, IDETAPE_DSC_RW_MAX, 1000, HZ, &tape->best_dsc_rw_freq, NULL); - ide_add_setting(drive, "dsc_overlap", SETTING_RW, TYPE_BYTE, 0, 1, 1, 1, &drive->dsc_overlap, NULL); - ide_add_setting(drive, "pipeline_head_speed_c",SETTING_READ, TYPE_INT, 0, 0xffff, 1, 1, &tape->controlled_pipeline_head_speed, NULL); - ide_add_setting(drive, "pipeline_head_speed_u",SETTING_READ, TYPE_INT, 0, 0xffff, 1, 1, &tape->uncontrolled_pipeline_head_speed,NULL); - ide_add_setting(drive, "avg_speed", SETTING_READ, TYPE_INT, 0, 0xffff, 1, 1, &tape->avg_speed, NULL); + ide_add_setting(drive, "dsc_overlap", SETTING_RW, TYPE_BYTE, 0, 1, 1, + 1, &drive->dsc_overlap, NULL); + ide_add_setting(drive, "pipeline_head_speed_c", SETTING_READ, TYPE_INT, + 0, 0xffff, 1, 1, &tape->controlled_pipeline_head_speed, + NULL); + ide_add_setting(drive, "pipeline_head_speed_u", SETTING_READ, TYPE_INT, + 0, 0xffff, 1, 1, + &tape->uncontrolled_pipeline_head_speed, NULL); + ide_add_setting(drive, "avg_speed", SETTING_READ, TYPE_INT, 0, 0xffff, + 1, 1, &tape->avg_speed, NULL); ide_add_setting(drive, "debug_mask", SETTING_RW, TYPE_INT, 0, 0xffff, 1, 1, &tape->debug_mask, NULL); } @@ -3396,7 +3509,7 @@ static inline void idetape_add_settings(ide_drive_t *drive) { ; } * Note that at this point ide.c already assigned us an irq, so that we can * queue requests here and wait for their completion. */ -static void idetape_setup (ide_drive_t *drive, idetape_tape_t *tape, int minor) +static void idetape_setup(ide_drive_t *drive, idetape_tape_t *tape, int minor) { unsigned long t1, tmid, tn, t; int speed; @@ -3429,7 +3542,9 @@ static void idetape_setup (ide_drive_t *drive, idetape_tape_t *tape, int minor) if (((gcw[0] & 0x60) >> 5) == 1) set_bit(IDETAPE_DRQ_INTERRUPT, &tape->flags); - tape->min_pipeline = tape->max_pipeline = tape->max_stages = 10; + tape->min_pipeline = 10; + tape->max_pipeline = 10; + tape->max_stages = 10; idetape_get_inquiry_results(drive); idetape_get_mode_sense_results(drive); @@ -3455,13 +3570,20 @@ static void idetape_setup (ide_drive_t *drive, idetape_tape_t *tape, int minor) /* Limit memory use for pipeline to 10% of physical memory */ si_meminfo(&si); - if (tape->max_stages * tape->stage_size > si.totalram * si.mem_unit / 10) - tape->max_stages = si.totalram * si.mem_unit / (10 * tape->stage_size); + if (tape->max_stages * tape->stage_size > + si.totalram * si.mem_unit / 10) + tape->max_stages = + si.totalram * si.mem_unit / (10 * tape->stage_size); + tape->max_stages = min(tape->max_stages, IDETAPE_MAX_PIPELINE_STAGES); tape->min_pipeline = min(tape->max_stages, IDETAPE_MIN_PIPELINE_STAGES); - tape->max_pipeline = min(tape->max_stages * 2, IDETAPE_MAX_PIPELINE_STAGES); - if (tape->max_stages == 0) - tape->max_stages = tape->min_pipeline = tape->max_pipeline = 1; + tape->max_pipeline = + min(tape->max_stages * 2, IDETAPE_MAX_PIPELINE_STAGES); + if (tape->max_stages == 0) { + tape->max_stages = 1; + tape->min_pipeline = 1; + tape->max_pipeline = 1; + } t1 = (tape->stage_size * HZ) / (speed * 1000); tmid = (*(u16 *)&tape->caps[16] * 32 * HZ) / (speed * 125); @@ -3513,7 +3635,8 @@ static void ide_tape_release(struct kref *kref) drive->dsc_overlap = 0; drive->driver_data = NULL; device_destroy(idetape_sysfs_class, MKDEV(IDETAPE_MAJOR, tape->minor)); - device_destroy(idetape_sysfs_class, MKDEV(IDETAPE_MAJOR, tape->minor + 128)); + device_destroy(idetape_sysfs_class, + MKDEV(IDETAPE_MAJOR, tape->minor + 128)); idetape_devs[tape->minor] = NULL; g->private_data = NULL; put_disk(g); @@ -3577,7 +3700,8 @@ static int idetape_open(struct inode *inode, struct file *filp) struct gendisk *disk = inode->i_bdev->bd_disk; struct ide_tape_obj *tape; - if (!(tape = ide_tape_get(disk))) + tape = ide_tape_get(disk); + if (!tape) return -ENXIO; return 0; @@ -3624,17 +3748,20 @@ static int ide_tape_probe(ide_drive_t *drive) goto failed; if (drive->media != ide_tape) goto failed; - if (!idetape_identify_device (drive)) { - printk(KERN_ERR "ide-tape: %s: not supported by this version of ide-tape\n", drive->name); + if (!idetape_identify_device(drive)) { + printk(KERN_ERR "ide-tape: %s: not supported by this version of" + " the driver\n", drive->name); goto failed; } if (drive->scsi) { - printk("ide-tape: passing drive %s to ide-scsi emulation.\n", drive->name); + printk(KERN_INFO "ide-tape: passing drive %s to ide-scsi" + " emulation.\n", drive->name); goto failed; } - tape = kzalloc(sizeof (idetape_tape_t), GFP_KERNEL); + tape = kzalloc(sizeof(idetape_tape_t), GFP_KERNEL); if (tape == NULL) { - printk(KERN_ERR "ide-tape: %s: Can't allocate a tape structure\n", drive->name); + printk(KERN_ERR "ide-tape: %s: Can't allocate a tape struct\n", + drive->name); goto failed; } @@ -3680,7 +3807,7 @@ failed: return -ENODEV; } -static void __exit idetape_exit (void) +static void __exit idetape_exit(void) { driver_unregister(&idetape_driver.gen_driver); class_destroy(idetape_sysfs_class); @@ -3699,7 +3826,8 @@ static int __init idetape_init(void) } if (register_chrdev(IDETAPE_MAJOR, "ht", &idetape_fops)) { - printk(KERN_ERR "ide-tape: Failed to register character device interface\n"); + printk(KERN_ERR "ide-tape: Failed to register chrdev" + " interface\n"); error = -EBUSY; goto out_free_class; } -- cgit v1.2.3 From dfe799364e7a500389559e1dcd331d995cdc18ea Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Wed, 6 Feb 2008 02:57:55 +0100 Subject: ide-tape: bump minor driver version Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-tape.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/ide/ide-tape.c') diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 11e1383150d9..49dd2e7bae7a 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -15,7 +15,7 @@ * Documentation/ide/ChangeLog.ide-tape.1995-2002 */ -#define IDETAPE_VERSION "1.19" +#define IDETAPE_VERSION "1.20" #include #include -- cgit v1.2.3