From 16d0f5c4af76b0c3424290937bf1ac22adf439b1 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Tue, 14 Oct 2014 22:17:47 +1100 Subject: powerpc: Remove ppc_md.remove_memory We have an extra level of indirection on memory hot remove which is not matched on memory hot add. Memory hotplug is book3s only, so there is no need for it. This also enables means remove_memory() (ie memory hot unplug) works on powernv. Signed-off-by: Anton Blanchard Signed-off-by: Michael Ellerman --- arch/powerpc/mm/mem.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) (limited to 'arch/powerpc/mm/mem.c') diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c index 8ebaac75c940..2add0b7b9f6d 100644 --- a/arch/powerpc/mm/mem.c +++ b/arch/powerpc/mm/mem.c @@ -35,6 +35,7 @@ #include #include #include +#include #include #include @@ -144,8 +145,17 @@ int arch_remove_memory(u64 start, u64 size) zone = page_zone(pfn_to_page(start_pfn)); ret = __remove_pages(zone, start_pfn, nr_pages); - if (!ret && (ppc_md.remove_memory)) - ret = ppc_md.remove_memory(start, size); + if (ret) + return ret; + + /* Remove htab bolted mappings for this section of memory */ + start = (unsigned long)__va(start); + ret = remove_section_mapping(start, start + size); + + /* Ensure all vmalloc mappings are flushed in case they also + * hit that section of memory + */ + vm_unmap_aliases(); return ret; } -- cgit v1.2.3 From 10239733ee8617bac3f1c1769af43a88ed979324 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Wed, 17 Sep 2014 22:15:33 +1000 Subject: powerpc: Remove bootmem allocator At the moment we transition from the memblock alloctor to the bootmem allocator. Gitting rid of the bootmem allocator removes a bunch of complicated code (most of which I owe the dubious honour of being responsible for writing). Signed-off-by: Anton Blanchard Tested-by: Emil Medve Signed-off-by: Michael Ellerman --- arch/powerpc/mm/mem.c | 62 ++------------------------------------------------- 1 file changed, 2 insertions(+), 60 deletions(-) (limited to 'arch/powerpc/mm/mem.c') diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c index 2add0b7b9f6d..e076d19c095b 100644 --- a/arch/powerpc/mm/mem.c +++ b/arch/powerpc/mm/mem.c @@ -61,7 +61,6 @@ #define CPU_FTR_NOEXECUTE 0 #endif -int init_bootmem_done; int mem_init_done; unsigned long long memory_limit; @@ -190,70 +189,22 @@ walk_system_ram_range(unsigned long start_pfn, unsigned long nr_pages, } EXPORT_SYMBOL_GPL(walk_system_ram_range); -/* - * Initialize the bootmem system and give it all the memory we - * have available. If we are using highmem, we only put the - * lowmem into the bootmem system. - */ #ifndef CONFIG_NEED_MULTIPLE_NODES -void __init do_init_bootmem(void) +void __init initmem_init(void) { - unsigned long start, bootmap_pages; - unsigned long total_pages; - struct memblock_region *reg; - int boot_mapsize; - max_low_pfn = max_pfn = memblock_end_of_DRAM() >> PAGE_SHIFT; - total_pages = (memblock_end_of_DRAM() - memstart_addr) >> PAGE_SHIFT; + min_low_pfn = MEMORY_START >> PAGE_SHIFT; #ifdef CONFIG_HIGHMEM - total_pages = total_lowmem >> PAGE_SHIFT; max_low_pfn = lowmem_end_addr >> PAGE_SHIFT; #endif - /* - * Find an area to use for the bootmem bitmap. Calculate the size of - * bitmap required as (Total Memory) / PAGE_SIZE / BITS_PER_BYTE. - * Add 1 additional page in case the address isn't page-aligned. - */ - bootmap_pages = bootmem_bootmap_pages(total_pages); - - start = memblock_alloc(bootmap_pages << PAGE_SHIFT, PAGE_SIZE); - - min_low_pfn = MEMORY_START >> PAGE_SHIFT; - boot_mapsize = init_bootmem_node(NODE_DATA(0), start >> PAGE_SHIFT, min_low_pfn, max_low_pfn); - /* Place all memblock_regions in the same node and merge contiguous * memblock_regions */ memblock_set_node(0, (phys_addr_t)ULLONG_MAX, &memblock.memory, 0); - /* Add all physical memory to the bootmem map, mark each area - * present. - */ -#ifdef CONFIG_HIGHMEM - free_bootmem_with_active_regions(0, lowmem_end_addr >> PAGE_SHIFT); - - /* reserve the sections we're already using */ - for_each_memblock(reserved, reg) { - unsigned long top = reg->base + reg->size - 1; - if (top < lowmem_end_addr) - reserve_bootmem(reg->base, reg->size, BOOTMEM_DEFAULT); - else if (reg->base < lowmem_end_addr) { - unsigned long trunc_size = lowmem_end_addr - reg->base; - reserve_bootmem(reg->base, trunc_size, BOOTMEM_DEFAULT); - } - } -#else - free_bootmem_with_active_regions(0, max_pfn); - - /* reserve the sections we're already using */ - for_each_memblock(reserved, reg) - reserve_bootmem(reg->base, reg->size, BOOTMEM_DEFAULT); -#endif /* XXX need to clip this if using highmem? */ sparse_memory_present_with_active_regions(0); - - init_bootmem_done = 1; } /* mark pages that don't exist as nosave */ @@ -369,14 +320,6 @@ void __init paging_init(void) mark_nonram_nosave(); } -static void __init register_page_bootmem_info(void) -{ - int i; - - for_each_online_node(i) - register_page_bootmem_info_node(NODE_DATA(i)); -} - void __init mem_init(void) { /* @@ -389,7 +332,6 @@ void __init mem_init(void) swiotlb_init(0); #endif - register_page_bootmem_info(); high_memory = (void *) __va(max_low_pfn * PAGE_SIZE); set_max_mapnr(max_pfn); free_all_bootmem(); -- cgit v1.2.3 From 21098b9e07476deb3f40acd7e51cffbffb4ef865 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Wed, 17 Sep 2014 22:15:36 +1000 Subject: powerpc: Move sparse_init() into initmem_init We did part of sparse initialisation in setup_arch and part in initmem_init. Put them together. Signed-off-by: Anton Blanchard Tested-by: Emil Medve Signed-off-by: Michael Ellerman --- arch/powerpc/mm/mem.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/powerpc/mm/mem.c') diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c index e076d19c095b..b7285a5870f8 100644 --- a/arch/powerpc/mm/mem.c +++ b/arch/powerpc/mm/mem.c @@ -205,6 +205,7 @@ void __init initmem_init(void) /* XXX need to clip this if using highmem? */ sparse_memory_present_with_active_regions(0); + sparse_init(); } /* mark pages that don't exist as nosave */ -- cgit v1.2.3