From 85ad3deea4525504355560649be7a41348111a60 Mon Sep 17 00:00:00 2001 From: Murali Karicheri Date: Sun, 9 Aug 2015 20:06:27 -0700 Subject: ARM: dts: keystone: Fix the mdio bindings by moving it to soc specific file Currently mdio bindings are defined in keystone.dtsi and this results in incorrect unit address for the node on K2E and K2L SoCs. Fix this by moving them to SoC specific DTS file. Signed-off-by: Murali Karicheri Signed-off-by: Santosh Shilimkar --- arch/arm/boot/dts/k2l.dtsi | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-) (limited to 'arch/arm/boot/dts/k2l.dtsi') diff --git a/arch/arm/boot/dts/k2l.dtsi b/arch/arm/boot/dts/k2l.dtsi index 0e007483615e..49fd414f680c 100644 --- a/arch/arm/boot/dts/k2l.dtsi +++ b/arch/arm/boot/dts/k2l.dtsi @@ -29,7 +29,6 @@ }; soc { - /include/ "k2l-clocks.dtsi" uart2: serial@02348400 { @@ -79,6 +78,17 @@ #gpio-cells = <2>; gpio,syscon-dev = <&devctrl 0x24c>; }; + + mdio: mdio@26200f00 { + compatible = "ti,keystone_mdio", "ti,davinci_mdio"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x26200f00 0x100>; + status = "disabled"; + clocks = <&clkcpgmac>; + clock-names = "fck"; + bus_freq = <2500000>; + }; /include/ "k2l-netcp.dtsi" }; }; @@ -96,7 +106,3 @@ /* Pin muxed. Enabled and configured by Bootloader */ status = "disabled"; }; - -&mdio { - reg = <0x26200f00 0x100>; -}; -- cgit v1.2.3