From 4eda9b766b042ea38d84df91581b03f6145a2ab0 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Thu, 10 May 2018 16:37:26 +0200 Subject: ARM: dts: socfpga: Fix NAND controller clock supply The Denali NAND x-clock should be supplied by nand_x_clk, not by nand_clk. Fix this, otherwise the Denali driver gets incorrect clock frequency information and incorrectly configures the NAND timing. Cc: stable@vger.kernel.org Signed-off-by: Marek Vasut Fixes: d837a80d19 ("ARM: dts: socfpga: add nand controller nodes") Cc: Steffen Trumtrar Signed-off-by: Dinh Nguyen --- arch/arm/boot/dts/socfpga.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi index 486d4e7433ed..8fbddc2a5c33 100644 --- a/arch/arm/boot/dts/socfpga.dtsi +++ b/arch/arm/boot/dts/socfpga.dtsi @@ -754,7 +754,7 @@ reg-names = "nand_data", "denali_reg"; interrupts = <0x0 0x90 0x4>; dma-mask = <0xffffffff>; - clocks = <&nand_clk>; + clocks = <&nand_x_clk>; status = "disabled"; }; -- cgit v1.2.3 From d9a695f3c8098ac9684689774a151cff30d8aa25 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Thu, 10 May 2018 14:52:23 +0200 Subject: ARM: dts: socfpga: Fix NAND controller node compatible The compatible string for the Denali NAND controller is incorrect, fix it by replacing it with one matching the DT bindings and the driver. Cc: stable@vger.kernel.org Signed-off-by: Marek Vasut Fixes: d837a80d19 ("ARM: dts: socfpga: add nand controller nodes") Cc: Steffen Trumtrar Signed-off-by: Dinh Nguyen --- arch/arm/boot/dts/socfpga.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi index 8fbddc2a5c33..b38f8c240558 100644 --- a/arch/arm/boot/dts/socfpga.dtsi +++ b/arch/arm/boot/dts/socfpga.dtsi @@ -748,7 +748,7 @@ nand0: nand@ff900000 { #address-cells = <0x1>; #size-cells = <0x1>; - compatible = "denali,denali-nand-dt"; + compatible = "altr,socfpga-denali-nand"; reg = <0xff900000 0x100000>, <0xffb80000 0x10000>; reg-names = "nand_data", "denali_reg"; -- cgit v1.2.3 From 3877ef7a1ccecaae378c497e1dcddbc2dccb664c Mon Sep 17 00:00:00 2001 From: Dinh Nguyen Date: Mon, 14 May 2018 10:15:19 -0500 Subject: ARM: dts: socfpga: Fix NAND controller node compatible for Arria10 The NAND compatible "denali,denal-nand-dt" property has never been used and is obsolete. Remove it. Cc: stable@vger.kernel.org Fixes: f549af06e9b6("ARM: dts: socfpga: Add NAND device tree for Arria10") Signed-off-by: Dinh Nguyen --- arch/arm/boot/dts/socfpga_arria10.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/socfpga_arria10.dtsi b/arch/arm/boot/dts/socfpga_arria10.dtsi index bead79e4b2aa..d8b1aa309f76 100644 --- a/arch/arm/boot/dts/socfpga_arria10.dtsi +++ b/arch/arm/boot/dts/socfpga_arria10.dtsi @@ -633,7 +633,7 @@ nand: nand@ffb90000 { #address-cells = <1>; #size-cells = <1>; - compatible = "denali,denali-nand-dt", "altr,socfpga-denali-nand"; + compatible = "altr,socfpga-denali-nand"; reg = <0xffb90000 0x72000>, <0xffb80000 0x10000>; reg-names = "nand_data", "denali_reg"; -- cgit v1.2.3 From 2f872ddcdb1e8e2186162616cea4581b8403849d Mon Sep 17 00:00:00 2001 From: Miquel Raynal Date: Tue, 22 May 2018 11:40:28 +0200 Subject: arm64: dts: marvell: fix CP110 ICU node size ICU size in CP110 is not 0x10 but at least 0x440 bytes long (from the specification). Fixes: 6ef84a827c37 ("arm64: dts: marvell: enable GICP and ICU on Armada 7K/8K") Cc: stable@vger.kernel.org Signed-off-by: Miquel Raynal Reviewed-by: Thomas Petazzoni Signed-off-by: Gregory CLEMENT --- arch/arm64/boot/dts/marvell/armada-cp110.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi index ed2f1237ea1e..8259b32f0ced 100644 --- a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi @@ -149,7 +149,7 @@ CP110_LABEL(icu): interrupt-controller@1e0000 { compatible = "marvell,cp110-icu"; - reg = <0x1e0000 0x10>; + reg = <0x1e0000 0x440>; #interrupt-cells = <3>; interrupt-controller; msi-parent = <&gicp>; -- cgit v1.2.3 From ac62cc9d9cd6fa4c79e171c13dc8d58c3862b678 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Fri, 25 May 2018 16:01:47 +0530 Subject: arm: dts: armada: Fix "#cooling-cells" property's name It should be "#cooling-cells" instead of "cooling-cells". Fix it. Signed-off-by: Viresh Kumar Signed-off-by: Gregory CLEMENT --- arch/arm/boot/dts/armada-385-synology-ds116.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/armada-385-synology-ds116.dts b/arch/arm/boot/dts/armada-385-synology-ds116.dts index 6782ce481ac9..d8769956cbfc 100644 --- a/arch/arm/boot/dts/armada-385-synology-ds116.dts +++ b/arch/arm/boot/dts/armada-385-synology-ds116.dts @@ -139,7 +139,7 @@ 3700 5 3900 6 4000 7>; - cooling-cells = <2>; + #cooling-cells = <2>; }; gpio-leds { -- cgit v1.2.3 From 45615a9baf4661f953887988eeb4de69fd6cd96e Mon Sep 17 00:00:00 2001 From: Xiaotong Lu Date: Fri, 1 Jun 2018 11:36:22 -0700 Subject: Input: add Spreadtrum vibrator driver This patch adds the Spreadtrum vibrator driver, which embedded in the Spreadtrum SC27xx series PMICs. Signed-off-by: Xiaotong Lu Signed-off-by: Baolin Wang Signed-off-by: Dmitry Torokhov --- .../bindings/input/sprd,sc27xx-vibra.txt | 23 +++ drivers/input/misc/Kconfig | 10 ++ drivers/input/misc/Makefile | 1 + drivers/input/misc/sc27xx-vibra.c | 154 +++++++++++++++++++++ 4 files changed, 188 insertions(+) create mode 100644 Documentation/devicetree/bindings/input/sprd,sc27xx-vibra.txt create mode 100644 drivers/input/misc/sc27xx-vibra.c diff --git a/Documentation/devicetree/bindings/input/sprd,sc27xx-vibra.txt b/Documentation/devicetree/bindings/input/sprd,sc27xx-vibra.txt new file mode 100644 index 000000000000..f2ec0d4f2dff --- /dev/null +++ b/Documentation/devicetree/bindings/input/sprd,sc27xx-vibra.txt @@ -0,0 +1,23 @@ +Spreadtrum SC27xx PMIC Vibrator + +Required properties: +- compatible: should be "sprd,sc2731-vibrator". +- reg: address of vibrator control register. + +Example : + + sc2731_pmic: pmic@0 { + compatible = "sprd,sc2731"; + reg = <0>; + spi-max-frequency = <26000000>; + interrupts = ; + interrupt-controller; + #interrupt-cells = <2>; + #address-cells = <1>; + #size-cells = <0>; + + vibrator@eb4 { + compatible = "sprd,sc2731-vibrator"; + reg = <0xeb4>; + }; + }; diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index 572b15fa18c2..c761c0c4f2b8 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -841,4 +841,14 @@ config INPUT_RAVE_SP_PWRBUTTON To compile this driver as a module, choose M here: the module will be called rave-sp-pwrbutton. +config INPUT_SC27XX_VIBRA + tristate "Spreadtrum sc27xx vibrator support" + depends on MFD_SC27XX_PMIC || COMPILE_TEST + select INPUT_FF_MEMLESS + help + This option enables support for Spreadtrum sc27xx vibrator driver. + + To compile this driver as a module, choose M here. The module will + be called sc27xx_vibra. + endif diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile index 72cde28649e2..9d0f9d1ff68f 100644 --- a/drivers/input/misc/Makefile +++ b/drivers/input/misc/Makefile @@ -66,6 +66,7 @@ obj-$(CONFIG_INPUT_RETU_PWRBUTTON) += retu-pwrbutton.o obj-$(CONFIG_INPUT_AXP20X_PEK) += axp20x-pek.o obj-$(CONFIG_INPUT_GPIO_ROTARY_ENCODER) += rotary_encoder.o obj-$(CONFIG_INPUT_RK805_PWRKEY) += rk805-pwrkey.o +obj-$(CONFIG_INPUT_SC27XX_VIBRA) += sc27xx-vibra.o obj-$(CONFIG_INPUT_SGI_BTNS) += sgi_btns.o obj-$(CONFIG_INPUT_SIRFSOC_ONKEY) += sirfsoc-onkey.o obj-$(CONFIG_INPUT_SOC_BUTTON_ARRAY) += soc_button_array.o diff --git a/drivers/input/misc/sc27xx-vibra.c b/drivers/input/misc/sc27xx-vibra.c new file mode 100644 index 000000000000..295251abbdac --- /dev/null +++ b/drivers/input/misc/sc27xx-vibra.c @@ -0,0 +1,154 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2018 Spreadtrum Communications Inc. + */ + +#include +#include +#include +#include +#include +#include + +#define CUR_DRV_CAL_SEL GENMASK(13, 12) +#define SLP_LDOVIBR_PD_EN BIT(9) +#define LDO_VIBR_PD BIT(8) + +struct vibra_info { + struct input_dev *input_dev; + struct work_struct play_work; + struct regmap *regmap; + u32 base; + u32 strength; + bool enabled; +}; + +static void sc27xx_vibra_set(struct vibra_info *info, bool on) +{ + if (on) { + regmap_update_bits(info->regmap, info->base, LDO_VIBR_PD, 0); + regmap_update_bits(info->regmap, info->base, + SLP_LDOVIBR_PD_EN, 0); + info->enabled = true; + } else { + regmap_update_bits(info->regmap, info->base, LDO_VIBR_PD, + LDO_VIBR_PD); + regmap_update_bits(info->regmap, info->base, + SLP_LDOVIBR_PD_EN, SLP_LDOVIBR_PD_EN); + info->enabled = false; + } +} + +static int sc27xx_vibra_hw_init(struct vibra_info *info) +{ + return regmap_update_bits(info->regmap, info->base, CUR_DRV_CAL_SEL, 0); +} + +static void sc27xx_vibra_play_work(struct work_struct *work) +{ + struct vibra_info *info = container_of(work, struct vibra_info, + play_work); + + if (info->strength && !info->enabled) + sc27xx_vibra_set(info, true); + else if (info->strength == 0 && info->enabled) + sc27xx_vibra_set(info, false); +} + +static int sc27xx_vibra_play(struct input_dev *input, void *data, + struct ff_effect *effect) +{ + struct vibra_info *info = input_get_drvdata(input); + + info->strength = effect->u.rumble.weak_magnitude; + schedule_work(&info->play_work); + + return 0; +} + +static void sc27xx_vibra_close(struct input_dev *input) +{ + struct vibra_info *info = input_get_drvdata(input); + + cancel_work_sync(&info->play_work); + if (info->enabled) + sc27xx_vibra_set(info, false); +} + +static int sc27xx_vibra_probe(struct platform_device *pdev) +{ + struct vibra_info *info; + int error; + + info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL); + if (!info) + return -ENOMEM; + + info->regmap = dev_get_regmap(pdev->dev.parent, NULL); + if (!info->regmap) { + dev_err(&pdev->dev, "failed to get vibrator regmap.\n"); + return -ENODEV; + } + + error = device_property_read_u32(&pdev->dev, "reg", &info->base); + if (error) { + dev_err(&pdev->dev, "failed to get vibrator base address.\n"); + return error; + } + + info->input_dev = devm_input_allocate_device(&pdev->dev); + if (!info->input_dev) { + dev_err(&pdev->dev, "failed to allocate input device.\n"); + return -ENOMEM; + } + + info->input_dev->name = "sc27xx:vibrator"; + info->input_dev->id.version = 0; + info->input_dev->close = sc27xx_vibra_close; + + input_set_drvdata(info->input_dev, info); + input_set_capability(info->input_dev, EV_FF, FF_RUMBLE); + INIT_WORK(&info->play_work, sc27xx_vibra_play_work); + info->enabled = false; + + error = sc27xx_vibra_hw_init(info); + if (error) { + dev_err(&pdev->dev, "failed to initialize the vibrator.\n"); + return error; + } + + error = input_ff_create_memless(info->input_dev, NULL, + sc27xx_vibra_play); + if (error) { + dev_err(&pdev->dev, "failed to register vibrator to FF.\n"); + return error; + } + + error = input_register_device(info->input_dev); + if (error) { + dev_err(&pdev->dev, "failed to register input device.\n"); + return error; + } + + return 0; +} + +static const struct of_device_id sc27xx_vibra_of_match[] = { + { .compatible = "sprd,sc2731-vibrator", }, + {} +}; +MODULE_DEVICE_TABLE(of, sc27xx_vibra_of_match); + +static struct platform_driver sc27xx_vibra_driver = { + .driver = { + .name = "sc27xx-vibrator", + .of_match_table = sc27xx_vibra_of_match, + }, + .probe = sc27xx_vibra_probe, +}; + +module_platform_driver(sc27xx_vibra_driver); + +MODULE_DESCRIPTION("Spreadtrum SC27xx Vibrator Driver"); +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Xiaotong Lu "); -- cgit v1.2.3 From 8f6a652a8c1379023775709e3db6c6f7c1bdb2ab Mon Sep 17 00:00:00 2001 From: Roman Kiryanov Date: Thu, 31 May 2018 17:03:33 -0700 Subject: Input: goldfish_events - fix checkpatch warnings Address issues pointed by checkpatch.pl Signed-off-by: Roman Kiryanov Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/goldfish_events.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/input/keyboard/goldfish_events.c b/drivers/input/keyboard/goldfish_events.c index f6e643b589b6..e8dae6195b30 100644 --- a/drivers/input/keyboard/goldfish_events.c +++ b/drivers/input/keyboard/goldfish_events.c @@ -45,7 +45,7 @@ struct event_dev { static irqreturn_t events_interrupt(int irq, void *dev_id) { struct event_dev *edev = dev_id; - unsigned type, code, value; + unsigned int type, code, value; type = __raw_readl(edev->addr + REG_READ); code = __raw_readl(edev->addr + REG_READ); @@ -57,7 +57,7 @@ static irqreturn_t events_interrupt(int irq, void *dev_id) } static void events_import_bits(struct event_dev *edev, - unsigned long bits[], unsigned type, size_t count) + unsigned long bits[], unsigned int type, size_t count) { void __iomem *addr = edev->addr; int i, j; @@ -99,6 +99,7 @@ static void events_import_abs_params(struct event_dev *edev) for (j = 0; j < ARRAY_SIZE(val); j++) { int offset = (i * ARRAY_SIZE(val) + j) * sizeof(u32); + val[j] = __raw_readl(edev->addr + REG_DATA + offset); } @@ -112,7 +113,7 @@ static int events_probe(struct platform_device *pdev) struct input_dev *input_dev; struct event_dev *edev; struct resource *res; - unsigned keymapnamelen; + unsigned int keymapnamelen; void __iomem *addr; int irq; int i; @@ -150,7 +151,7 @@ static int events_probe(struct platform_device *pdev) for (i = 0; i < keymapnamelen; i++) edev->name[i] = __raw_readb(edev->addr + REG_DATA + i); - pr_debug("events_probe() keymap=%s\n", edev->name); + pr_debug("%s: keymap=%s\n", __func__, edev->name); input_dev->name = edev->name; input_dev->id.bustype = BUS_HOST; -- cgit v1.2.3 From fc573af632b44f355f8fa15ab505f5593368078d Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Tue, 5 Jun 2018 09:34:22 -0700 Subject: Input: silead - add MSSL0002 ACPI HID The Silead touchscreen on the Chuwi Vi8 tablet uses MSSL0002 as ACPI HID, rather then the usual MSSL1680 id. Signed-off-by: Hans de Goede Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/silead.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/input/touchscreen/silead.c b/drivers/input/touchscreen/silead.c index ff7043f74a3d..d196ac3d8b8c 100644 --- a/drivers/input/touchscreen/silead.c +++ b/drivers/input/touchscreen/silead.c @@ -603,6 +603,7 @@ static const struct acpi_device_id silead_ts_acpi_match[] = { { "GSL3692", 0 }, { "MSSL1680", 0 }, { "MSSL0001", 0 }, + { "MSSL0002", 0 }, { } }; MODULE_DEVICE_TABLE(acpi, silead_ts_acpi_match); -- cgit v1.2.3 From 24d28e4f1271cb2f91613dada8f2acccd00eff56 Mon Sep 17 00:00:00 2001 From: Nick Dyer Date: Tue, 5 Jun 2018 10:17:51 -0700 Subject: Input: synaptics-rmi4 - convert irq distribution to irq_domain Convert the RMI driver to use the standard mechanism for distributing IRQs to the various functions. Tested on: * S7300 (F11, F34, F54) * S7817 (F12, F34, F54) Signed-off-by: Nick Dyer Acked-by: Christopher Heiny Signed-off-by: Dmitry Torokhov --- drivers/input/rmi4/Kconfig | 1 + drivers/input/rmi4/rmi_bus.c | 50 ++++++++++++++++++++++++++++++++++++++- drivers/input/rmi4/rmi_bus.h | 10 +++++++- drivers/input/rmi4/rmi_driver.c | 52 ++++++++++++++++------------------------- drivers/input/rmi4/rmi_f01.c | 10 ++++---- drivers/input/rmi4/rmi_f03.c | 9 +++---- drivers/input/rmi4/rmi_f11.c | 42 +++++++++++++-------------------- drivers/input/rmi4/rmi_f12.c | 8 +++---- drivers/input/rmi4/rmi_f30.c | 9 +++---- drivers/input/rmi4/rmi_f34.c | 5 ++-- drivers/input/rmi4/rmi_f54.c | 6 ----- include/linux/rmi.h | 2 ++ 12 files changed, 119 insertions(+), 85 deletions(-) diff --git a/drivers/input/rmi4/Kconfig b/drivers/input/rmi4/Kconfig index 7172b88cd064..fad2eae4a118 100644 --- a/drivers/input/rmi4/Kconfig +++ b/drivers/input/rmi4/Kconfig @@ -3,6 +3,7 @@ # config RMI4_CORE tristate "Synaptics RMI4 bus support" + select IRQ_DOMAIN help Say Y here if you want to support the Synaptics RMI4 bus. This is required for all RMI4 device support. diff --git a/drivers/input/rmi4/rmi_bus.c b/drivers/input/rmi4/rmi_bus.c index c5fa53adba8d..bd0d5ff01b08 100644 --- a/drivers/input/rmi4/rmi_bus.c +++ b/drivers/input/rmi4/rmi_bus.c @@ -9,6 +9,8 @@ #include #include +#include +#include #include #include #include @@ -167,6 +169,39 @@ static inline void rmi_function_of_probe(struct rmi_function *fn) {} #endif +static struct irq_chip rmi_irq_chip = { + .name = "rmi4", +}; + +static int rmi_create_function_irq(struct rmi_function *fn, + struct rmi_function_handler *handler) +{ + struct rmi_driver_data *drvdata = dev_get_drvdata(&fn->rmi_dev->dev); + int i, error; + + for (i = 0; i < fn->num_of_irqs; i++) { + set_bit(fn->irq_pos + i, fn->irq_mask); + + fn->irq[i] = irq_create_mapping(drvdata->irqdomain, + fn->irq_pos + i); + + irq_set_chip_data(fn->irq[i], fn); + irq_set_chip_and_handler(fn->irq[i], &rmi_irq_chip, + handle_simple_irq); + irq_set_nested_thread(fn->irq[i], 1); + + error = devm_request_threaded_irq(&fn->dev, fn->irq[i], NULL, + handler->attention, IRQF_ONESHOT, + dev_name(&fn->dev), fn); + if (error) { + dev_err(&fn->dev, "Error %d registering IRQ\n", error); + return error; + } + } + + return 0; +} + static int rmi_function_probe(struct device *dev) { struct rmi_function *fn = to_rmi_function(dev); @@ -178,7 +213,14 @@ static int rmi_function_probe(struct device *dev) if (handler->probe) { error = handler->probe(fn); - return error; + if (error) + return error; + } + + if (fn->num_of_irqs && handler->attention) { + error = rmi_create_function_irq(fn, handler); + if (error) + return error; } return 0; @@ -230,12 +272,18 @@ err_put_device: void rmi_unregister_function(struct rmi_function *fn) { + int i; + rmi_dbg(RMI_DEBUG_CORE, &fn->dev, "Unregistering F%02X.\n", fn->fd.function_number); device_del(&fn->dev); of_node_put(fn->dev.of_node); put_device(&fn->dev); + + for (i = 0; i < fn->num_of_irqs; i++) + irq_dispose_mapping(fn->irq[i]); + } /** diff --git a/drivers/input/rmi4/rmi_bus.h b/drivers/input/rmi4/rmi_bus.h index b7625a9ac66a..96383eab41ba 100644 --- a/drivers/input/rmi4/rmi_bus.h +++ b/drivers/input/rmi4/rmi_bus.h @@ -14,6 +14,12 @@ struct rmi_device; +/* + * The interrupt source count in the function descriptor can represent up to + * 6 interrupt sources in the normal manner. + */ +#define RMI_FN_MAX_IRQS 6 + /** * struct rmi_function - represents the implementation of an RMI4 * function for a particular device (basically, a driver for that RMI4 function) @@ -26,6 +32,7 @@ struct rmi_device; * @irq_pos: The position in the irq bitfield this function holds * @irq_mask: For convenience, can be used to mask IRQ bits off during ATTN * interrupt handling. + * @irqs: assigned virq numbers (up to num_of_irqs) * * @node: entry in device's list of functions */ @@ -36,6 +43,7 @@ struct rmi_function { struct list_head node; unsigned int num_of_irqs; + int irq[RMI_FN_MAX_IRQS]; unsigned int irq_pos; unsigned long irq_mask[]; }; @@ -76,7 +84,7 @@ struct rmi_function_handler { void (*remove)(struct rmi_function *fn); int (*config)(struct rmi_function *fn); int (*reset)(struct rmi_function *fn); - int (*attention)(struct rmi_function *fn, unsigned long *irq_bits); + irqreturn_t (*attention)(int irq, void *ctx); int (*suspend)(struct rmi_function *fn); int (*resume)(struct rmi_function *fn); }; diff --git a/drivers/input/rmi4/rmi_driver.c b/drivers/input/rmi4/rmi_driver.c index f5954981e9ee..2fb0ae0bdfe3 100644 --- a/drivers/input/rmi4/rmi_driver.c +++ b/drivers/input/rmi4/rmi_driver.c @@ -21,6 +21,7 @@ #include #include #include +#include #include #include #include "rmi_bus.h" @@ -127,28 +128,11 @@ static int rmi_driver_process_config_requests(struct rmi_device *rmi_dev) return 0; } -static void process_one_interrupt(struct rmi_driver_data *data, - struct rmi_function *fn) -{ - struct rmi_function_handler *fh; - - if (!fn || !fn->dev.driver) - return; - - fh = to_rmi_function_handler(fn->dev.driver); - if (fh->attention) { - bitmap_and(data->fn_irq_bits, data->irq_status, fn->irq_mask, - data->irq_count); - if (!bitmap_empty(data->fn_irq_bits, data->irq_count)) - fh->attention(fn, data->fn_irq_bits); - } -} - static int rmi_process_interrupt_requests(struct rmi_device *rmi_dev) { struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev); struct device *dev = &rmi_dev->dev; - struct rmi_function *entry; + int i; int error; if (!data) @@ -173,16 +157,8 @@ static int rmi_process_interrupt_requests(struct rmi_device *rmi_dev) */ mutex_unlock(&data->irq_mutex); - /* - * It would be nice to be able to use irq_chip to handle these - * nested IRQs. Unfortunately, most of the current customers for - * this driver are using older kernels (3.0.x) that don't support - * the features required for that. Once they've shifted to more - * recent kernels (say, 3.3 and higher), this should be switched to - * use irq_chip. - */ - list_for_each_entry(entry, &data->function_list, node) - process_one_interrupt(data, entry); + for_each_set_bit(i, data->irq_status, data->irq_count) + handle_nested_irq(irq_find_mapping(data->irqdomain, i)); if (data->input) input_sync(data->input); @@ -1000,9 +976,13 @@ EXPORT_SYMBOL_GPL(rmi_driver_resume); static int rmi_driver_remove(struct device *dev) { struct rmi_device *rmi_dev = to_rmi_device(dev); + struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev); rmi_disable_irq(rmi_dev, false); + irq_domain_remove(data->irqdomain); + data->irqdomain = NULL; + rmi_f34_remove_sysfs(rmi_dev); rmi_free_function_list(rmi_dev); @@ -1034,7 +1014,8 @@ int rmi_probe_interrupts(struct rmi_driver_data *data) { struct rmi_device *rmi_dev = data->rmi_dev; struct device *dev = &rmi_dev->dev; - int irq_count; + struct fwnode_handle *fwnode = rmi_dev->xport->dev->fwnode; + int irq_count = 0; size_t size; int retval; @@ -1045,7 +1026,6 @@ int rmi_probe_interrupts(struct rmi_driver_data *data) * being accessed. */ rmi_dbg(RMI_DEBUG_CORE, dev, "%s: Counting IRQs.\n", __func__); - irq_count = 0; data->bootloader_mode = false; retval = rmi_scan_pdt(rmi_dev, &irq_count, rmi_count_irqs); @@ -1057,6 +1037,15 @@ int rmi_probe_interrupts(struct rmi_driver_data *data) if (data->bootloader_mode) dev_warn(dev, "Device in bootloader mode.\n"); + /* Allocate and register a linear revmap irq_domain */ + data->irqdomain = irq_domain_create_linear(fwnode, irq_count, + &irq_domain_simple_ops, + data); + if (!data->irqdomain) { + dev_err(&rmi_dev->dev, "Failed to create IRQ domain\n"); + return PTR_ERR(data->irqdomain); + } + data->irq_count = irq_count; data->num_of_irq_regs = (data->irq_count + 7) / 8; @@ -1079,10 +1068,9 @@ int rmi_init_functions(struct rmi_driver_data *data) { struct rmi_device *rmi_dev = data->rmi_dev; struct device *dev = &rmi_dev->dev; - int irq_count; + int irq_count = 0; int retval; - irq_count = 0; rmi_dbg(RMI_DEBUG_CORE, dev, "%s: Creating functions.\n", __func__); retval = rmi_scan_pdt(rmi_dev, &irq_count, rmi_create_function); if (retval < 0) { diff --git a/drivers/input/rmi4/rmi_f01.c b/drivers/input/rmi4/rmi_f01.c index 8a07ae147df6..4edaa14fe878 100644 --- a/drivers/input/rmi4/rmi_f01.c +++ b/drivers/input/rmi4/rmi_f01.c @@ -681,9 +681,9 @@ static int rmi_f01_resume(struct rmi_function *fn) return 0; } -static int rmi_f01_attention(struct rmi_function *fn, - unsigned long *irq_bits) +static irqreturn_t rmi_f01_attention(int irq, void *ctx) { + struct rmi_function *fn = ctx; struct rmi_device *rmi_dev = fn->rmi_dev; int error; u8 device_status; @@ -692,7 +692,7 @@ static int rmi_f01_attention(struct rmi_function *fn, if (error) { dev_err(&fn->dev, "Failed to read device status: %d.\n", error); - return error; + return IRQ_RETVAL(error); } if (RMI_F01_STATUS_BOOTLOADER(device_status)) @@ -704,11 +704,11 @@ static int rmi_f01_attention(struct rmi_function *fn, error = rmi_dev->driver->reset_handler(rmi_dev); if (error) { dev_err(&fn->dev, "Device reset failed: %d\n", error); - return error; + return IRQ_RETVAL(error); } } - return 0; + return IRQ_HANDLED; } struct rmi_function_handler rmi_f01_handler = { diff --git a/drivers/input/rmi4/rmi_f03.c b/drivers/input/rmi4/rmi_f03.c index 88822196d6b7..aaa1edc95522 100644 --- a/drivers/input/rmi4/rmi_f03.c +++ b/drivers/input/rmi4/rmi_f03.c @@ -244,8 +244,9 @@ static int rmi_f03_config(struct rmi_function *fn) return 0; } -static int rmi_f03_attention(struct rmi_function *fn, unsigned long *irq_bits) +static irqreturn_t rmi_f03_attention(int irq, void *ctx) { + struct rmi_function *fn = ctx; struct rmi_device *rmi_dev = fn->rmi_dev; struct rmi_driver_data *drvdata = dev_get_drvdata(&rmi_dev->dev); struct f03_data *f03 = dev_get_drvdata(&fn->dev); @@ -262,7 +263,7 @@ static int rmi_f03_attention(struct rmi_function *fn, unsigned long *irq_bits) /* First grab the data passed by the transport device */ if (drvdata->attn_data.size < ob_len) { dev_warn(&fn->dev, "F03 interrupted, but data is missing!\n"); - return 0; + return IRQ_HANDLED; } memcpy(obs, drvdata->attn_data.data, ob_len); @@ -277,7 +278,7 @@ static int rmi_f03_attention(struct rmi_function *fn, unsigned long *irq_bits) "%s: Failed to read F03 output buffers: %d\n", __func__, error); serio_interrupt(f03->serio, 0, SERIO_TIMEOUT); - return error; + return IRQ_RETVAL(error); } } @@ -303,7 +304,7 @@ static int rmi_f03_attention(struct rmi_function *fn, unsigned long *irq_bits) serio_interrupt(f03->serio, ob_data, serio_flags); } - return 0; + return IRQ_HANDLED; } static void rmi_f03_remove(struct rmi_function *fn) diff --git a/drivers/input/rmi4/rmi_f11.c b/drivers/input/rmi4/rmi_f11.c index bc5e37f30ac1..5f2e1ef5accc 100644 --- a/drivers/input/rmi4/rmi_f11.c +++ b/drivers/input/rmi4/rmi_f11.c @@ -570,9 +570,7 @@ static inline u8 rmi_f11_parse_finger_state(const u8 *f_state, u8 n_finger) } static void rmi_f11_finger_handler(struct f11_data *f11, - struct rmi_2d_sensor *sensor, - unsigned long *irq_bits, int num_irq_regs, - int size) + struct rmi_2d_sensor *sensor, int size) { const u8 *f_state = f11->data.f_state; u8 finger_state; @@ -581,12 +579,7 @@ static void rmi_f11_finger_handler(struct f11_data *f11, int rel_fingers; int abs_size = sensor->nbr_fingers * RMI_F11_ABS_BYTES; - int abs_bits = bitmap_and(f11->result_bits, irq_bits, f11->abs_mask, - num_irq_regs * 8); - int rel_bits = bitmap_and(f11->result_bits, irq_bits, f11->rel_mask, - num_irq_regs * 8); - - if (abs_bits) { + if (sensor->report_abs) { if (abs_size > size) abs_fingers = size / RMI_F11_ABS_BYTES; else @@ -604,19 +597,7 @@ static void rmi_f11_finger_handler(struct f11_data *f11, rmi_f11_abs_pos_process(f11, sensor, &sensor->objs[i], finger_state, i); } - } - if (rel_bits) { - if ((abs_size + sensor->nbr_fingers * RMI_F11_REL_BYTES) > size) - rel_fingers = (size - abs_size) / RMI_F11_REL_BYTES; - else - rel_fingers = sensor->nbr_fingers; - - for (i = 0; i < rel_fingers; i++) - rmi_f11_rel_pos_report(f11, i); - } - - if (abs_bits) { /* * the absolute part is made in 2 parts to allow the kernel * tracking to take place. @@ -638,7 +619,16 @@ static void rmi_f11_finger_handler(struct f11_data *f11, } input_mt_sync_frame(sensor->input); + } else if (sensor->report_rel) { + if ((abs_size + sensor->nbr_fingers * RMI_F11_REL_BYTES) > size) + rel_fingers = (size - abs_size) / RMI_F11_REL_BYTES; + else + rel_fingers = sensor->nbr_fingers; + + for (i = 0; i < rel_fingers; i++) + rmi_f11_rel_pos_report(f11, i); } + } static int f11_2d_construct_data(struct f11_data *f11) @@ -1275,8 +1265,9 @@ static int rmi_f11_config(struct rmi_function *fn) return 0; } -static int rmi_f11_attention(struct rmi_function *fn, unsigned long *irq_bits) +static irqreturn_t rmi_f11_attention(int irq, void *ctx) { + struct rmi_function *fn = ctx; struct rmi_device *rmi_dev = fn->rmi_dev; struct rmi_driver_data *drvdata = dev_get_drvdata(&rmi_dev->dev); struct f11_data *f11 = dev_get_drvdata(&fn->dev); @@ -1302,13 +1293,12 @@ static int rmi_f11_attention(struct rmi_function *fn, unsigned long *irq_bits) data_base_addr, f11->sensor.data_pkt, f11->sensor.pkt_size); if (error < 0) - return error; + return IRQ_RETVAL(error); } - rmi_f11_finger_handler(f11, &f11->sensor, irq_bits, - drvdata->num_of_irq_regs, valid_bytes); + rmi_f11_finger_handler(f11, &f11->sensor, valid_bytes); - return 0; + return IRQ_HANDLED; } static int rmi_f11_resume(struct rmi_function *fn) diff --git a/drivers/input/rmi4/rmi_f12.c b/drivers/input/rmi4/rmi_f12.c index 8b0db086d68a..e226def74d82 100644 --- a/drivers/input/rmi4/rmi_f12.c +++ b/drivers/input/rmi4/rmi_f12.c @@ -197,10 +197,10 @@ static void rmi_f12_process_objects(struct f12_data *f12, u8 *data1, int size) rmi_2d_sensor_abs_report(sensor, &sensor->objs[i], i); } -static int rmi_f12_attention(struct rmi_function *fn, - unsigned long *irq_nr_regs) +static irqreturn_t rmi_f12_attention(int irq, void *ctx) { int retval; + struct rmi_function *fn = ctx; struct rmi_device *rmi_dev = fn->rmi_dev; struct rmi_driver_data *drvdata = dev_get_drvdata(&rmi_dev->dev); struct f12_data *f12 = dev_get_drvdata(&fn->dev); @@ -222,7 +222,7 @@ static int rmi_f12_attention(struct rmi_function *fn, if (retval < 0) { dev_err(&fn->dev, "Failed to read object data. Code: %d.\n", retval); - return retval; + return IRQ_RETVAL(retval); } } @@ -232,7 +232,7 @@ static int rmi_f12_attention(struct rmi_function *fn, input_mt_sync_frame(sensor->input); - return 0; + return IRQ_HANDLED; } static int rmi_f12_write_control_regs(struct rmi_function *fn) diff --git a/drivers/input/rmi4/rmi_f30.c b/drivers/input/rmi4/rmi_f30.c index 82e0f0d43d55..5e3ed5ac0c3e 100644 --- a/drivers/input/rmi4/rmi_f30.c +++ b/drivers/input/rmi4/rmi_f30.c @@ -122,8 +122,9 @@ static void rmi_f30_report_button(struct rmi_function *fn, } } -static int rmi_f30_attention(struct rmi_function *fn, unsigned long *irq_bits) +static irqreturn_t rmi_f30_attention(int irq, void *ctx) { + struct rmi_function *fn = ctx; struct f30_data *f30 = dev_get_drvdata(&fn->dev); struct rmi_driver_data *drvdata = dev_get_drvdata(&fn->rmi_dev->dev); int error; @@ -134,7 +135,7 @@ static int rmi_f30_attention(struct rmi_function *fn, unsigned long *irq_bits) if (drvdata->attn_data.size < f30->register_count) { dev_warn(&fn->dev, "F30 interrupted, but data is missing\n"); - return 0; + return IRQ_HANDLED; } memcpy(f30->data_regs, drvdata->attn_data.data, f30->register_count); @@ -147,7 +148,7 @@ static int rmi_f30_attention(struct rmi_function *fn, unsigned long *irq_bits) dev_err(&fn->dev, "%s: Failed to read F30 data registers: %d\n", __func__, error); - return error; + return IRQ_RETVAL(error); } } @@ -159,7 +160,7 @@ static int rmi_f30_attention(struct rmi_function *fn, unsigned long *irq_bits) rmi_f03_commit_buttons(f30->f03); } - return 0; + return IRQ_HANDLED; } static int rmi_f30_config(struct rmi_function *fn) diff --git a/drivers/input/rmi4/rmi_f34.c b/drivers/input/rmi4/rmi_f34.c index f1f5ac539d5d..87a7d4ba382d 100644 --- a/drivers/input/rmi4/rmi_f34.c +++ b/drivers/input/rmi4/rmi_f34.c @@ -100,8 +100,9 @@ static int rmi_f34_command(struct f34_data *f34, u8 command, return 0; } -static int rmi_f34_attention(struct rmi_function *fn, unsigned long *irq_bits) +static irqreturn_t rmi_f34_attention(int irq, void *ctx) { + struct rmi_function *fn = ctx; struct f34_data *f34 = dev_get_drvdata(&fn->dev); int ret; u8 status; @@ -126,7 +127,7 @@ static int rmi_f34_attention(struct rmi_function *fn, unsigned long *irq_bits) complete(&f34->v7.cmd_done); } - return 0; + return IRQ_HANDLED; } static int rmi_f34_write_blocks(struct f34_data *f34, const void *data, diff --git a/drivers/input/rmi4/rmi_f54.c b/drivers/input/rmi4/rmi_f54.c index 5343f2c08f15..98a935efec8e 100644 --- a/drivers/input/rmi4/rmi_f54.c +++ b/drivers/input/rmi4/rmi_f54.c @@ -610,11 +610,6 @@ error: mutex_unlock(&f54->data_mutex); } -static int rmi_f54_attention(struct rmi_function *fn, unsigned long *irqbits) -{ - return 0; -} - static int rmi_f54_config(struct rmi_function *fn) { struct rmi_driver *drv = fn->rmi_dev->driver; @@ -756,6 +751,5 @@ struct rmi_function_handler rmi_f54_handler = { .func = 0x54, .probe = rmi_f54_probe, .config = rmi_f54_config, - .attention = rmi_f54_attention, .remove = rmi_f54_remove, }; diff --git a/include/linux/rmi.h b/include/linux/rmi.h index 64125443f8a6..5ef5c7c412a7 100644 --- a/include/linux/rmi.h +++ b/include/linux/rmi.h @@ -354,6 +354,8 @@ struct rmi_driver_data { struct mutex irq_mutex; struct input_dev *input; + struct irq_domain *irqdomain; + u8 pdt_props; u8 num_rx_electrodes; -- cgit v1.2.3 From 977d5ba4507dfe5b1346597ee57750262d8d2b19 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 5 Jun 2018 17:05:15 +0200 Subject: soc: renesas: rcar-sysc: Make PM domain initialization more robust The quirk for R-Car E3 ES1.0 added in commit 086b399965a7ee7e ("soc: renesas: r8a77990-sysc: Add workaround for 3DG-{A,B}") makes the 3DG-A PM domain a subdomain of the 3DG-B PM domain. However, registering 3DG-A with its parent fails silently, as the 3DG-B PM domain hasn't been registered yet, and such failures are never reported. Fix this by: 1. Splitting PM Domain initialization in two steps, so all PM domains are registered before any child-parent links are established, 2. Reporting any failures in establishing child-parent relations. Check for and report pm_genpd_init() failures, too, as that function gained a return value in commit 7eb231c337e00735 ("PM / Domains: Convert pm_genpd_init() to return an error code"). Fixes: 086b399965a7ee7e ("soc: renesas: r8a77990-sysc: Add workaround for 3DG-{A,B}") Signed-off-by: Geert Uytterhoeven Tested-by: Yoshihiro Shimoda Reviewed-by: Ulf Hansson Signed-off-by: Simon Horman --- drivers/soc/renesas/rcar-sysc.c | 35 +++++++++++++++++++++++++++++------ 1 file changed, 29 insertions(+), 6 deletions(-) diff --git a/drivers/soc/renesas/rcar-sysc.c b/drivers/soc/renesas/rcar-sysc.c index 95120acc4d80..50d03d8b4f9a 100644 --- a/drivers/soc/renesas/rcar-sysc.c +++ b/drivers/soc/renesas/rcar-sysc.c @@ -194,11 +194,12 @@ static int rcar_sysc_pd_power_on(struct generic_pm_domain *genpd) static bool has_cpg_mstp; -static void __init rcar_sysc_pd_setup(struct rcar_sysc_pd *pd) +static int __init rcar_sysc_pd_setup(struct rcar_sysc_pd *pd) { struct generic_pm_domain *genpd = &pd->genpd; const char *name = pd->genpd.name; struct dev_power_governor *gov = &simple_qos_governor; + int error; if (pd->flags & PD_CPU) { /* @@ -251,7 +252,11 @@ static void __init rcar_sysc_pd_setup(struct rcar_sysc_pd *pd) rcar_sysc_power_up(&pd->ch); finalize: - pm_genpd_init(genpd, gov, false); + error = pm_genpd_init(genpd, gov, false); + if (error) + pr_err("Failed to init PM domain %s: %d\n", name, error); + + return error; } static const struct of_device_id rcar_sysc_matches[] __initconst = { @@ -375,6 +380,9 @@ static int __init rcar_sysc_pd_init(void) pr_debug("%pOF: syscier = 0x%08x\n", np, syscier); iowrite32(syscier, base + SYSCIER); + /* + * First, create all PM domains + */ for (i = 0; i < info->num_areas; i++) { const struct rcar_sysc_area *area = &info->areas[i]; struct rcar_sysc_pd *pd; @@ -397,14 +405,29 @@ static int __init rcar_sysc_pd_init(void) pd->ch.isr_bit = area->isr_bit; pd->flags = area->flags; - rcar_sysc_pd_setup(pd); - if (area->parent >= 0) - pm_genpd_add_subdomain(domains->domains[area->parent], - &pd->genpd); + error = rcar_sysc_pd_setup(pd); + if (error) + goto out_put; domains->domains[area->isr_bit] = &pd->genpd; } + /* + * Second, link all PM domains to their parents + */ + for (i = 0; i < info->num_areas; i++) { + const struct rcar_sysc_area *area = &info->areas[i]; + + if (!area->name || area->parent < 0) + continue; + + error = pm_genpd_add_subdomain(domains->domains[area->parent], + domains->domains[area->isr_bit]); + if (error) + pr_warn("Failed to add PM subdomain %s to parent %u\n", + area->name, area->parent); + } + error = of_genpd_add_provider_onecell(np, &domains->onecell_data); out_put: -- cgit v1.2.3 From fd629294759b1e6e5dfc0c9bf892e63553dcc6fa Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Mon, 11 Jun 2018 10:09:15 -0700 Subject: Input: synaptics-rmi4 - fix the error return code in rmi_probe_interrupts() The error return code PTR_ERR(data->irqdomain) is always 0 since data->irqdomain is equal to NULL in this error handling case. Fixes: 24d28e4f1271 ("Input: synaptics-rmi4 - convert irq distribution to irq_domain") Signed-off-by: Wei Yongjun Reviewed-by: Lyude Paul Reviewed-by: Nick Desaulniers Signed-off-by: Dmitry Torokhov --- drivers/input/rmi4/rmi_driver.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/input/rmi4/rmi_driver.c b/drivers/input/rmi4/rmi_driver.c index 2fb0ae0bdfe3..cb6d983e8033 100644 --- a/drivers/input/rmi4/rmi_driver.c +++ b/drivers/input/rmi4/rmi_driver.c @@ -1043,7 +1043,7 @@ int rmi_probe_interrupts(struct rmi_driver_data *data) data); if (!data->irqdomain) { dev_err(&rmi_dev->dev, "Failed to create IRQ domain\n"); - return PTR_ERR(data->irqdomain); + return -ENOMEM; } data->irq_count = irq_count; -- cgit v1.2.3 From 645a397d325db6e1bb36588095ae637738b37693 Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Tue, 5 Jun 2018 10:34:54 -0700 Subject: Input: synaptics-rmi4 - fix axis-swap behavior The documentation for the touchscreen-swapped-x-y property states that swapping is done after inverting if both are used. RMI4 did it the other way around, leading to inconsistent behavior with regard to other touchscreens. Signed-off-by: Lucas Stach Tested-by: Nick Dyer Signed-off-by: Dmitry Torokhov --- drivers/input/rmi4/rmi_2d_sensor.c | 34 ++++++++++++++++------------------ 1 file changed, 16 insertions(+), 18 deletions(-) diff --git a/drivers/input/rmi4/rmi_2d_sensor.c b/drivers/input/rmi4/rmi_2d_sensor.c index 8bb866c7b985..8eeffa066022 100644 --- a/drivers/input/rmi4/rmi_2d_sensor.c +++ b/drivers/input/rmi4/rmi_2d_sensor.c @@ -32,15 +32,15 @@ void rmi_2d_sensor_abs_process(struct rmi_2d_sensor *sensor, if (obj->type == RMI_2D_OBJECT_NONE) return; - if (axis_align->swap_axes) - swap(obj->x, obj->y); - if (axis_align->flip_x) obj->x = sensor->max_x - obj->x; if (axis_align->flip_y) obj->y = sensor->max_y - obj->y; + if (axis_align->swap_axes) + swap(obj->x, obj->y); + /* * Here checking if X offset or y offset are specified is * redundant. We just add the offsets or clip the values. @@ -120,15 +120,15 @@ void rmi_2d_sensor_rel_report(struct rmi_2d_sensor *sensor, int x, int y) x = min(RMI_2D_REL_POS_MAX, max(RMI_2D_REL_POS_MIN, (int)x)); y = min(RMI_2D_REL_POS_MAX, max(RMI_2D_REL_POS_MIN, (int)y)); - if (axis_align->swap_axes) - swap(x, y); - if (axis_align->flip_x) x = min(RMI_2D_REL_POS_MAX, -x); if (axis_align->flip_y) y = min(RMI_2D_REL_POS_MAX, -y); + if (axis_align->swap_axes) + swap(x, y); + if (x || y) { input_report_rel(sensor->input, REL_X, x); input_report_rel(sensor->input, REL_Y, y); @@ -141,17 +141,10 @@ static void rmi_2d_sensor_set_input_params(struct rmi_2d_sensor *sensor) struct input_dev *input = sensor->input; int res_x; int res_y; + int max_x, max_y; int input_flags = 0; if (sensor->report_abs) { - if (sensor->axis_align.swap_axes) { - swap(sensor->max_x, sensor->max_y); - swap(sensor->axis_align.clip_x_low, - sensor->axis_align.clip_y_low); - swap(sensor->axis_align.clip_x_high, - sensor->axis_align.clip_y_high); - } - sensor->min_x = sensor->axis_align.clip_x_low; if (sensor->axis_align.clip_x_high) sensor->max_x = min(sensor->max_x, @@ -163,14 +156,19 @@ static void rmi_2d_sensor_set_input_params(struct rmi_2d_sensor *sensor) sensor->axis_align.clip_y_high); set_bit(EV_ABS, input->evbit); - input_set_abs_params(input, ABS_MT_POSITION_X, 0, sensor->max_x, - 0, 0); - input_set_abs_params(input, ABS_MT_POSITION_Y, 0, sensor->max_y, - 0, 0); + + max_x = sensor->max_x; + max_y = sensor->max_y; + if (sensor->axis_align.swap_axes) + swap(max_x, max_y); + input_set_abs_params(input, ABS_MT_POSITION_X, 0, max_x, 0, 0); + input_set_abs_params(input, ABS_MT_POSITION_Y, 0, max_y, 0, 0); if (sensor->x_mm && sensor->y_mm) { res_x = (sensor->max_x - sensor->min_x) / sensor->x_mm; res_y = (sensor->max_y - sensor->min_y) / sensor->y_mm; + if (sensor->axis_align.swap_axes) + swap(res_x, res_y); input_abs_set_res(input, ABS_X, res_x); input_abs_set_res(input, ABS_Y, res_y); -- cgit v1.2.3 From bf6247a70f2b7569180304041b63b59ab14217bc Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Tue, 5 Jun 2018 10:08:44 -0700 Subject: Input: make input_report_slot_state() return boolean Let's make input_report_slot_state() return boolean representing whether the contact is active or not. This will allow writing code like: if (input_mt_report_slot_state(input, obj->mt_tool, obj->type != RMI_2D_OBJECT_NONE) { input_event(sensor->input, EV_ABS, ABS_MT_POSITION_X, obj->x); input_event(sensor->input, EV_ABS, ABS_MT_POSITION_Y, obj->y); ... } instead of: input_mt_report_slot_state(input, obj->mt_tool, obj->type != RMI_2D_OBJECT_NONE); if (obj->type != RMI_2D_OBJECT_NONE) { input_event(sensor->input, EV_ABS, ABS_MT_POSITION_X, obj->x); input_event(sensor->input, EV_ABS, ABS_MT_POSITION_Y, obj->y); ... } Reviewed-by: Henrik Rydberg Acked-by: Benjamin Tissoires Signed-off-by: Dmitry Torokhov --- drivers/input/input-mt.c | 10 +++++++--- include/linux/input/mt.h | 2 +- 2 files changed, 8 insertions(+), 4 deletions(-) diff --git a/drivers/input/input-mt.c b/drivers/input/input-mt.c index a1bbec9cda8d..8de52e3c00c0 100644 --- a/drivers/input/input-mt.c +++ b/drivers/input/input-mt.c @@ -131,8 +131,10 @@ EXPORT_SYMBOL(input_mt_destroy_slots); * inactive, or if the tool type is changed, a new tracking id is * assigned to the slot. The tool type is only reported if the * corresponding absbit field is set. + * + * Returns true if contact is active. */ -void input_mt_report_slot_state(struct input_dev *dev, +bool input_mt_report_slot_state(struct input_dev *dev, unsigned int tool_type, bool active) { struct input_mt *mt = dev->mt; @@ -140,14 +142,14 @@ void input_mt_report_slot_state(struct input_dev *dev, int id; if (!mt) - return; + return false; slot = &mt->slots[mt->slot]; slot->frame = mt->frame; if (!active) { input_event(dev, EV_ABS, ABS_MT_TRACKING_ID, -1); - return; + return false; } id = input_mt_get_value(slot, ABS_MT_TRACKING_ID); @@ -156,6 +158,8 @@ void input_mt_report_slot_state(struct input_dev *dev, input_event(dev, EV_ABS, ABS_MT_TRACKING_ID, id); input_event(dev, EV_ABS, ABS_MT_TOOL_TYPE, tool_type); + + return true; } EXPORT_SYMBOL(input_mt_report_slot_state); diff --git a/include/linux/input/mt.h b/include/linux/input/mt.h index d7188de4db96..3f4bf60b0bb5 100644 --- a/include/linux/input/mt.h +++ b/include/linux/input/mt.h @@ -100,7 +100,7 @@ static inline bool input_is_mt_axis(int axis) return axis == ABS_MT_SLOT || input_is_mt_value(axis); } -void input_mt_report_slot_state(struct input_dev *dev, +bool input_mt_report_slot_state(struct input_dev *dev, unsigned int tool_type, bool active); void input_mt_report_finger_count(struct input_dev *dev, int count); -- cgit v1.2.3 From c258e84b180d38f76ab9962cf5bfc10720af1360 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Tue, 15 Aug 2017 16:00:42 -0700 Subject: Input: do not assign new tracking ID when changing tool type We allow changing tool type (from MT_TOOL_FINGER to MT_TOOL_PALM) so we should not be forcing new tracking ID for the slot. Acked-by: Benjamin Tissoires Reviewed-by: Peter Hutterer Signed-off-by: Dmitry Torokhov --- drivers/input/input-mt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/input/input-mt.c b/drivers/input/input-mt.c index 8de52e3c00c0..4a69716e5461 100644 --- a/drivers/input/input-mt.c +++ b/drivers/input/input-mt.c @@ -153,7 +153,7 @@ bool input_mt_report_slot_state(struct input_dev *dev, } id = input_mt_get_value(slot, ABS_MT_TRACKING_ID); - if (id < 0 || input_mt_get_value(slot, ABS_MT_TOOL_TYPE) != tool_type) + if (id < 0) id = input_mt_new_trkid(mt); input_event(dev, EV_ABS, ABS_MT_TRACKING_ID, id); -- cgit v1.2.3 From 71ab91157e9d849a5a0c5fcd1ce68d236c3ca703 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Mon, 11 Jun 2018 08:58:36 -0600 Subject: microblaze: heartbeat: fix missing prom.h include Since commit 96f0e6fcc9ad ("microblaze: remove redundant early_printk support") prom.h was removed and one instance in heartbeat.c remained. Include of.h as it is the actual header needed. Fixes: 96f0e6fcc9ad ("microblaze: remove redundant early_printk support") Reported-by: kbuild test robot Cc: Michal Simek Signed-off-by: Rob Herring Signed-off-by: Michal Simek --- arch/microblaze/kernel/heartbeat.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/microblaze/kernel/heartbeat.c b/arch/microblaze/kernel/heartbeat.c index 2022130139d2..87aa942eee8c 100644 --- a/arch/microblaze/kernel/heartbeat.c +++ b/arch/microblaze/kernel/heartbeat.c @@ -11,10 +11,10 @@ #include #include #include +#include #include #include -#include static unsigned int base_addr; -- cgit v1.2.3 From 5cf8da7bc03570bc15ef1b59e584dfb9e0f47e51 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Tue, 12 Jun 2018 12:46:17 +0200 Subject: microblaze: Remove architecture heart beat code There is no reason to keep this gpio based code in architecture. Use ledtrig-heartbeat.c instead which is much more flexible then this ancient code. Signed-off-by: Michal Simek Reviewed-by: Linus Walleij --- arch/microblaze/Kconfig.debug | 7 ---- arch/microblaze/include/asm/setup.h | 3 -- arch/microblaze/kernel/Makefile | 2 -- arch/microblaze/kernel/heartbeat.c | 72 ------------------------------------- arch/microblaze/kernel/timer.c | 7 ---- 5 files changed, 91 deletions(-) delete mode 100644 arch/microblaze/kernel/heartbeat.c diff --git a/arch/microblaze/Kconfig.debug b/arch/microblaze/Kconfig.debug index 331a3bb66297..93a737c8d1a6 100644 --- a/arch/microblaze/Kconfig.debug +++ b/arch/microblaze/Kconfig.debug @@ -8,11 +8,4 @@ config TRACE_IRQFLAGS_SUPPORT source "lib/Kconfig.debug" -config HEART_BEAT - bool "Heart beat function for kernel" - default n - help - This option turns on/off heart beat kernel functionality. - First GPIO node is taken. - endmenu diff --git a/arch/microblaze/include/asm/setup.h b/arch/microblaze/include/asm/setup.h index d5384f6f36f7..a38e4a56e3c6 100644 --- a/arch/microblaze/include/asm/setup.h +++ b/arch/microblaze/include/asm/setup.h @@ -19,9 +19,6 @@ extern char cmd_line[COMMAND_LINE_SIZE]; extern char *klimit; -void microblaze_heartbeat(void); -void microblaze_setup_heartbeat(void); - # ifdef CONFIG_MMU extern void mmu_reset(void); # endif /* CONFIG_MMU */ diff --git a/arch/microblaze/kernel/Makefile b/arch/microblaze/kernel/Makefile index 7e99cf6984a1..3a53378d66d9 100644 --- a/arch/microblaze/kernel/Makefile +++ b/arch/microblaze/kernel/Makefile @@ -8,7 +8,6 @@ ifdef CONFIG_FUNCTION_TRACER CFLAGS_REMOVE_timer.o = -pg CFLAGS_REMOVE_intc.o = -pg CFLAGS_REMOVE_early_printk.o = -pg -CFLAGS_REMOVE_heartbeat.o = -pg CFLAGS_REMOVE_ftrace.o = -pg CFLAGS_REMOVE_process.o = -pg endif @@ -22,7 +21,6 @@ obj-y += dma.o exceptions.o \ obj-y += cpu/ -obj-$(CONFIG_HEART_BEAT) += heartbeat.o obj-$(CONFIG_MODULES) += microblaze_ksyms.o module.o obj-$(CONFIG_MMU) += misc.o obj-$(CONFIG_STACKTRACE) += stacktrace.o diff --git a/arch/microblaze/kernel/heartbeat.c b/arch/microblaze/kernel/heartbeat.c deleted file mode 100644 index 87aa942eee8c..000000000000 --- a/arch/microblaze/kernel/heartbeat.c +++ /dev/null @@ -1,72 +0,0 @@ -/* - * Copyright (C) 2007-2009 Michal Simek - * Copyright (C) 2007-2009 PetaLogix - * Copyright (C) 2006 Atmark Techno, Inc. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#include -#include -#include -#include - -#include -#include - -static unsigned int base_addr; - -void microblaze_heartbeat(void) -{ - static unsigned int cnt, period, dist; - - if (base_addr) { - if (cnt == 0 || cnt == dist) - out_be32(base_addr, 1); - else if (cnt == 7 || cnt == dist + 7) - out_be32(base_addr, 0); - - if (++cnt > period) { - cnt = 0; - /* - * The hyperbolic function below modifies the heartbeat - * period length in dependency of the current (5min) - * load. It goes through the points f(0)=126, f(1)=86, - * f(5)=51, f(inf)->30. - */ - period = ((672 << FSHIFT) / (5 * avenrun[0] + - (7 << FSHIFT))) + 30; - dist = period / 4; - } - } -} - -void microblaze_setup_heartbeat(void) -{ - struct device_node *gpio = NULL; - int *prop; - int j; - const char * const gpio_list[] = { - "xlnx,xps-gpio-1.00.a", - NULL - }; - - for (j = 0; gpio_list[j] != NULL; j++) { - gpio = of_find_compatible_node(NULL, NULL, gpio_list[j]); - if (gpio) - break; - } - - if (gpio) { - base_addr = be32_to_cpup(of_get_property(gpio, "reg", NULL)); - base_addr = (unsigned long) ioremap(base_addr, PAGE_SIZE); - pr_notice("Heartbeat GPIO at 0x%x\n", base_addr); - - /* GPIO is configured as output */ - prop = (int *) of_get_property(gpio, "xlnx,is-bidir", NULL); - if (prop) - out_be32(base_addr + 4, 0); - } -} diff --git a/arch/microblaze/kernel/timer.c b/arch/microblaze/kernel/timer.c index 7de941cbbd94..a6683484b3a1 100644 --- a/arch/microblaze/kernel/timer.c +++ b/arch/microblaze/kernel/timer.c @@ -156,9 +156,6 @@ static inline void timer_ack(void) static irqreturn_t timer_interrupt(int irq, void *dev_id) { struct clock_event_device *evt = &clockevent_xilinx_timer; -#ifdef CONFIG_HEART_BEAT - microblaze_heartbeat(); -#endif timer_ack(); evt->event_handler(evt); return IRQ_HANDLED; @@ -318,10 +315,6 @@ static int __init xilinx_timer_init(struct device_node *timer) return ret; } -#ifdef CONFIG_HEART_BEAT - microblaze_setup_heartbeat(); -#endif - ret = xilinx_clocksource_init(); if (ret) return ret; -- cgit v1.2.3 From df07101e1c4a29e820df02f9989a066988b160e6 Mon Sep 17 00:00:00 2001 From: Sean Nyekjaer Date: Tue, 22 May 2018 19:45:09 +0200 Subject: ARM: dts: imx6q: Use correct SDMA script for SPI5 core According to the reference manual the shp_2_mcu / mcu_2_shp scripts must be used for devices connected through the SPBA. This fixes an issue we saw with DMA transfers. Sometimes the SPI controller RX FIFO was not empty after a DMA transfer and the driver got stuck in the next PIO transfer when it read one word more than expected. commit dd4b487b32a35 ("ARM: dts: imx6: Use correct SDMA script for SPI cores") is fixing the same issue but only for SPI1 - 4. Fixes: 677940258dd8e ("ARM: dts: imx6q: enable dma for ecspi5") Signed-off-by: Sean Nyekjaer Reviewed-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6q.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index 70483ce72ba6..77f8f030dd07 100644 --- a/arch/arm/boot/dts/imx6q.dtsi +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -90,7 +90,7 @@ clocks = <&clks IMX6Q_CLK_ECSPI5>, <&clks IMX6Q_CLK_ECSPI5>; clock-names = "ipg", "per"; - dmas = <&sdma 11 7 1>, <&sdma 12 7 2>; + dmas = <&sdma 11 8 1>, <&sdma 12 8 2>; dma-names = "rx", "tx"; status = "disabled"; }; -- cgit v1.2.3 From d5a6cabf02210b896a60eee7c04c670ee9ba6dca Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 13 Jun 2018 12:43:10 +0200 Subject: ALSA: hda/realtek - Fix pop noise on Lenovo P50 & co Some Lenovo laptops, e.g. Lenovo P50, showed the pop noise at resume or runtime resume. It turned out to be reduced by applying alc_no_shutup() just like TPT440 quirk does. Since there are many Lenovo models showing the same behavior, put this workaround in ALC269_FIXUP_THINKPAD_ACPI entry so that it's applied commonly to all such Lenovo machines. Reported-by: Hans de Goede Tested-by: Benjamin Berg Cc: Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index e9bd33ea538f..487ceb9fd038 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -4995,7 +4995,6 @@ static void alc_fixup_tpt440_dock(struct hda_codec *codec, struct alc_spec *spec = codec->spec; if (action == HDA_FIXUP_ACT_PRE_PROBE) { - spec->shutup = alc_no_shutup; /* reduce click noise */ spec->reboot_notify = alc_d3_at_reboot; /* reduce noise */ spec->parse_flags = HDA_PINCFG_NO_HP_FIXUP; codec->power_save_node = 0; /* avoid click noises */ @@ -5394,6 +5393,13 @@ static void alc274_fixup_bind_dacs(struct hda_codec *codec, /* for hda_fixup_thinkpad_acpi() */ #include "thinkpad_helper.c" +static void alc_fixup_thinkpad_acpi(struct hda_codec *codec, + const struct hda_fixup *fix, int action) +{ + alc_fixup_no_shutup(codec, fix, action); /* reduce click noise */ + hda_fixup_thinkpad_acpi(codec, fix, action); +} + /* for dell wmi mic mute led */ #include "dell_wmi_helper.c" @@ -5946,7 +5952,7 @@ static const struct hda_fixup alc269_fixups[] = { }, [ALC269_FIXUP_THINKPAD_ACPI] = { .type = HDA_FIXUP_FUNC, - .v.func = hda_fixup_thinkpad_acpi, + .v.func = alc_fixup_thinkpad_acpi, .chained = true, .chain_id = ALC269_FIXUP_SKU_IGNORE, }, -- cgit v1.2.3 From 7919cd82b9f9be97111be386cbaac59958800ef9 Mon Sep 17 00:00:00 2001 From: Alastair Bridgewater Date: Fri, 15 Jun 2018 21:56:15 -0400 Subject: ALSA: hda/ca0132: Delete pointless assignments to struct auto_pin_cfg fields ca0132_config() was setting some values in the auto_pin_cfg for the codec... but it is called prior to snd_hda_parse_pin_defcfg(), which does a memset() to clear the entire structure as one of its first actions, making the entire exercise pointless. Kill all use of struct auto_pin_cfg from ca0132_config(). Signed-off-by: Alastair Bridgewater Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_ca0132.c | 14 -------------- 1 file changed, 14 deletions(-) diff --git a/sound/pci/hda/patch_ca0132.c b/sound/pci/hda/patch_ca0132.c index 04e949aa01ad..c66834a9bac6 100644 --- a/sound/pci/hda/patch_ca0132.c +++ b/sound/pci/hda/patch_ca0132.c @@ -7343,7 +7343,6 @@ static const struct hda_codec_ops ca0132_patch_ops = { static void ca0132_config(struct hda_codec *codec) { struct ca0132_spec *spec = codec->spec; - struct auto_pin_cfg *cfg = &spec->autocfg; spec->dacs[0] = 0x2; spec->dacs[1] = 0x3; @@ -7405,12 +7404,7 @@ static void ca0132_config(struct hda_codec *codec) /* SPDIF I/O */ spec->dig_out = 0x05; spec->multiout.dig_out_nid = spec->dig_out; - cfg->dig_out_pins[0] = 0x0c; - cfg->dig_outs = 1; - cfg->dig_out_type[0] = HDA_PCM_TYPE_SPDIF; spec->dig_in = 0x09; - cfg->dig_in_pin = 0x0e; - cfg->dig_in_type = HDA_PCM_TYPE_SPDIF; break; case QUIRK_R3DI: codec_dbg(codec, "%s: QUIRK_R3DI applied.\n", __func__); @@ -7438,9 +7432,6 @@ static void ca0132_config(struct hda_codec *codec) /* SPDIF I/O */ spec->dig_out = 0x05; spec->multiout.dig_out_nid = spec->dig_out; - cfg->dig_out_pins[0] = 0x0c; - cfg->dig_outs = 1; - cfg->dig_out_type[0] = HDA_PCM_TYPE_SPDIF; break; default: spec->num_outputs = 2; @@ -7463,12 +7454,7 @@ static void ca0132_config(struct hda_codec *codec) /* SPDIF I/O */ spec->dig_out = 0x05; spec->multiout.dig_out_nid = spec->dig_out; - cfg->dig_out_pins[0] = 0x0c; - cfg->dig_outs = 1; - cfg->dig_out_type[0] = HDA_PCM_TYPE_SPDIF; spec->dig_in = 0x09; - cfg->dig_in_pin = 0x0e; - cfg->dig_in_type = HDA_PCM_TYPE_SPDIF; break; } } -- cgit v1.2.3 From a3d90d6775e2066a100b9124e40880bd317d2e02 Mon Sep 17 00:00:00 2001 From: Alastair Bridgewater Date: Fri, 15 Jun 2018 21:56:16 -0400 Subject: ALSA: hda/ca0132: Delete redundant UNSOL event requests During ca0132_init(), ca0132_init_unsol() is run before the spec->spec_init_verbs are written. ca0132_init_unsol() calls snd_hda_jack_detect_enable_callback(), which requests UNSOL events for three or four nodes, two of which were also (redundantly) requested by spec_init_verbs. Kill the redundant AC_VERB_SET_UNSOLICITED_ENABLE verbs. Signed-off-by: Alastair Bridgewater Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_ca0132.c | 32 +++++++++++--------------------- 1 file changed, 11 insertions(+), 21 deletions(-) diff --git a/sound/pci/hda/patch_ca0132.c b/sound/pci/hda/patch_ca0132.c index c66834a9bac6..dba731c0bf53 100644 --- a/sound/pci/hda/patch_ca0132.c +++ b/sound/pci/hda/patch_ca0132.c @@ -7462,7 +7462,7 @@ static void ca0132_config(struct hda_codec *codec) static int ca0132_prepare_verbs(struct hda_codec *codec) { /* Verbs + terminator (an empty element) */ -#define NUM_SPEC_VERBS 4 +#define NUM_SPEC_VERBS 2 struct ca0132_spec *spec = codec->spec; spec->chip_init_verbs = ca0132_init_verbs0; @@ -7474,34 +7474,24 @@ static int ca0132_prepare_verbs(struct hda_codec *codec) if (!spec->spec_init_verbs) return -ENOMEM; - /* HP jack autodetection */ - spec->spec_init_verbs[0].nid = spec->unsol_tag_hp; - spec->spec_init_verbs[0].param = AC_VERB_SET_UNSOLICITED_ENABLE; - spec->spec_init_verbs[0].verb = AC_USRSP_EN | spec->unsol_tag_hp; - - /* MIC1 jack autodetection */ - spec->spec_init_verbs[1].nid = spec->unsol_tag_amic1; - spec->spec_init_verbs[1].param = AC_VERB_SET_UNSOLICITED_ENABLE; - spec->spec_init_verbs[1].verb = AC_USRSP_EN | spec->unsol_tag_amic1; - /* config EAPD */ - spec->spec_init_verbs[2].nid = 0x0b; - spec->spec_init_verbs[2].param = 0x78D; - spec->spec_init_verbs[2].verb = 0x00; + spec->spec_init_verbs[0].nid = 0x0b; + spec->spec_init_verbs[0].param = 0x78D; + spec->spec_init_verbs[0].verb = 0x00; /* Previously commented configuration */ /* - spec->spec_init_verbs[3].nid = 0x0b; - spec->spec_init_verbs[3].param = AC_VERB_SET_EAPD_BTLENABLE; + spec->spec_init_verbs[2].nid = 0x0b; + spec->spec_init_verbs[2].param = AC_VERB_SET_EAPD_BTLENABLE; + spec->spec_init_verbs[2].verb = 0x02; + + spec->spec_init_verbs[3].nid = 0x10; + spec->spec_init_verbs[3].param = 0x78D; spec->spec_init_verbs[3].verb = 0x02; spec->spec_init_verbs[4].nid = 0x10; - spec->spec_init_verbs[4].param = 0x78D; + spec->spec_init_verbs[4].param = AC_VERB_SET_EAPD_BTLENABLE; spec->spec_init_verbs[4].verb = 0x02; - - spec->spec_init_verbs[5].nid = 0x10; - spec->spec_init_verbs[5].param = AC_VERB_SET_EAPD_BTLENABLE; - spec->spec_init_verbs[5].verb = 0x02; */ /* Terminator: spec->spec_init_verbs[NUM_SPEC_VERBS-1] */ -- cgit v1.2.3 From 365c7f25cd0a72b16979ba948e6c389a9a89818b Mon Sep 17 00:00:00 2001 From: Alastair Bridgewater Date: Fri, 15 Jun 2018 21:56:17 -0400 Subject: ALSA: hda/ca0132: Restore behavior of QUIRK_ALIENWARE Commit e93ac30a32a6ba7ac3b4b2a4379af1dadb91e505 (ALSA: HDA/ca0132: add extra init functions for r3di + sbz) introduced an extra initialization function that was improperly guarded, taking effect on systems with QUIRK_ALIENWARE, even though such systems were supposedly not affected. It may be that this piece of initialization should be done for all systems, but that's not a call that I can make. Fixes: e93ac30a32a6 ("ALSA: HDA/ca0132: add extra init functions for r3di + sbz") Signed-off-by: Alastair Bridgewater Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_ca0132.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/hda/patch_ca0132.c b/sound/pci/hda/patch_ca0132.c index dba731c0bf53..25fccce1eff1 100644 --- a/sound/pci/hda/patch_ca0132.c +++ b/sound/pci/hda/patch_ca0132.c @@ -7223,7 +7223,7 @@ static int ca0132_init(struct hda_codec *codec) snd_hda_sequence_write(codec, spec->base_init_verbs); - if (spec->quirk != QUIRK_NONE) + if (spec->use_alt_functions) ca0132_alt_init(codec); ca0132_download_dsp(codec); -- cgit v1.2.3 From 126b75e03894f3053b723130cb9b824e6f15d8e6 Mon Sep 17 00:00:00 2001 From: Alastair Bridgewater Date: Fri, 15 Jun 2018 21:56:18 -0400 Subject: ALSA: hda/ca0132: Don't test for QUIRK_NONE QUIRK_NONE is, quite explicitly, the default case. The entire point of a quirks system is to allow "programming by difference" from a given base case, which requires that merely defining a new quirk for some piece of hardware should not change the behavior of the driver for that hardware. In turn, this means that testing for QUIRK_NONE explicitly is a violation of that implicit contract. Change a test for QUIRK_NONE and QUIRK_ALIENWARE to default, and add a test for QUIRK_SBZ to disable the default behavior in that instance. Signed-off-by: Alastair Bridgewater Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_ca0132.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/sound/pci/hda/patch_ca0132.c b/sound/pci/hda/patch_ca0132.c index 25fccce1eff1..49635d1c9c39 100644 --- a/sound/pci/hda/patch_ca0132.c +++ b/sound/pci/hda/patch_ca0132.c @@ -7237,8 +7237,9 @@ static int ca0132_init(struct hda_codec *codec) case QUIRK_R3DI: r3di_setup_defaults(codec); break; - case QUIRK_NONE: - case QUIRK_ALIENWARE: + case QUIRK_SBZ: + break; + default: ca0132_setup_defaults(codec); ca0132_init_analog_mic2(codec); ca0132_init_dmic(codec); -- cgit v1.2.3 From 5f8ddc6ee63a9057522923a6b2eb8c51993e1db0 Mon Sep 17 00:00:00 2001 From: Alastair Bridgewater Date: Fri, 15 Jun 2018 21:56:19 -0400 Subject: ALSA: hda/ca0132: Restore PCM Analog Mic-In2 Commit 009b8f979bf8cb5f7ec6d3dd7683585122ed10f8 conditionalized adding the "CA0132 Analog Mic-In2" PCM with a comment to the effect that, "desktops don't use this ADC", but the test was set up such that the ADC was only created for desktops. Invert the test. Fixes: 009b8f979bf8 ("ALSA: hda/ca0132: update core functions for sbz + r3di") Signed-off-by: Alastair Bridgewater Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_ca0132.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/hda/patch_ca0132.c b/sound/pci/hda/patch_ca0132.c index 49635d1c9c39..09ff85c622bb 100644 --- a/sound/pci/hda/patch_ca0132.c +++ b/sound/pci/hda/patch_ca0132.c @@ -5966,7 +5966,7 @@ static int ca0132_build_pcms(struct hda_codec *codec) info->stream[SNDRV_PCM_STREAM_CAPTURE].nid = spec->adcs[0]; /* With the DSP enabled, desktops don't use this ADC. */ - if (spec->use_alt_functions) { + if (!spec->use_alt_functions) { info = snd_hda_codec_pcm_new(codec, "CA0132 Analog Mic-In2"); if (!info) return -ENOMEM; -- cgit v1.2.3 From a57a46b93244a0a916b894d8b2ca2a6cfe1904d3 Mon Sep 17 00:00:00 2001 From: Alastair Bridgewater Date: Fri, 15 Jun 2018 21:56:20 -0400 Subject: ALSA: hda/ca0132: Fix DMic data rate for Alienware M17x R4 The commentary says to use various parameters, and lays out what the mapping is... The code used a 32KHz rate when the comment says that it needs to use a 48KHz rate. And this has been the case since day one. On the Alienware M17x R4, the DMic used to have exceptionally quiet pickup and a lot of noise. Changing the data rate fixes both of these issues. Searching the kernel bug tracker for ca0132-related issues shows no mention of this being an issue for other hardware, and I have no other hardware to test with, so a quirk is used to limit the effect to just the M17x R4. Signed-off-by: Alastair Bridgewater Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_ca0132.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/sound/pci/hda/patch_ca0132.c b/sound/pci/hda/patch_ca0132.c index 09ff85c622bb..d62c56feaf7d 100644 --- a/sound/pci/hda/patch_ca0132.c +++ b/sound/pci/hda/patch_ca0132.c @@ -991,6 +991,7 @@ struct ca0132_spec { enum { QUIRK_NONE, QUIRK_ALIENWARE, + QUIRK_ALIENWARE_M17XR4, QUIRK_SBZ, QUIRK_R3DI, }; @@ -1040,6 +1041,7 @@ static const struct hda_pintbl r3di_pincfgs[] = { }; static const struct snd_pci_quirk ca0132_quirks[] = { + SND_PCI_QUIRK(0x1028, 0x057b, "Alienware M17x R4", QUIRK_ALIENWARE_M17XR4), SND_PCI_QUIRK(0x1028, 0x0685, "Alienware 15 2015", QUIRK_ALIENWARE), SND_PCI_QUIRK(0x1028, 0x0688, "Alienware 17 2015", QUIRK_ALIENWARE), SND_PCI_QUIRK(0x1028, 0x0708, "Alienware 15 R2 2016", QUIRK_ALIENWARE), @@ -6130,7 +6132,10 @@ static void ca0132_init_dmic(struct hda_codec *codec) * Bit 6: set to select Data2, clear for Data1 * Bit 7: set to enable DMic, clear for AMic */ - val = 0x23; + if (spec->quirk == QUIRK_ALIENWARE_M17XR4) + val = 0x33; + else + val = 0x23; /* keep a copy of dmic ctl val for enable/disable dmic purpuse */ spec->dmic_ctl = val; snd_hda_codec_write(codec, spec->input_pins[0], 0, -- cgit v1.2.3 From 3637f12faf507b0a4b8ac1e7115fc99583ab1db3 Mon Sep 17 00:00:00 2001 From: Anson Huang Date: Wed, 30 May 2018 09:30:42 +0800 Subject: soc: imx: gpcv2: correct PGC offset Correct MIPI/PCIe/USB_HSIC's PGC offset based on design RTL, the values in the Reference Manual (Rev. 1, 01/2018 and the older ones) are incorrect. The correct offset values should be as below: 0x800 ~ 0x83F: PGC for core0 of A7 platform; 0x840 ~ 0x87F: PGC for core1 of A7 platform; 0x880 ~ 0x8BF: PGC for SCU of A7 platform; 0xA00 ~ 0xA3F: PGC for fastmix/megamix; 0xC00 ~ 0xC3F: PGC for MIPI PHY; 0xC40 ~ 0xC7F: PGC for PCIe_PHY; 0xC80 ~ 0xCBF: PGC for USB OTG1 PHY; 0xCC0 ~ 0xCFF: PGC for USB OTG2 PHY; 0xD00 ~ 0xD3F: PGC for USB HSIC PHY; Signed-off-by: Anson Huang Fixes: 03aa12629fc4 ("soc: imx: Add GPCv2 power gating driver") Acked-by: Andrey Smirnov Reviewed-by: Fabio Estevam Signed-off-by: Shawn Guo --- drivers/soc/imx/gpcv2.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/drivers/soc/imx/gpcv2.c b/drivers/soc/imx/gpcv2.c index f4e3bd40c72e..6ef18cf8f243 100644 --- a/drivers/soc/imx/gpcv2.c +++ b/drivers/soc/imx/gpcv2.c @@ -39,10 +39,15 @@ #define GPC_M4_PU_PDN_FLG 0x1bc - -#define PGC_MIPI 4 -#define PGC_PCIE 5 -#define PGC_USB_HSIC 8 +/* + * The PGC offset values in Reference Manual + * (Rev. 1, 01/2018 and the older ones) GPC chapter's + * GPC_PGC memory map are incorrect, below offset + * values are from design RTL. + */ +#define PGC_MIPI 16 +#define PGC_PCIE 17 +#define PGC_USB_HSIC 20 #define GPC_PGC_CTRL(n) (0x800 + (n) * 0x40) #define GPC_PGC_SR(n) (GPC_PGC_CTRL(n) + 0xc) -- cgit v1.2.3 From 2f839823382748664b643daa73f41ee0cc01ced6 Mon Sep 17 00:00:00 2001 From: Karoly Pados Date: Sat, 9 Jun 2018 13:26:08 +0200 Subject: USB: serial: cp210x: add Silicon Labs IDs for Windows Update Silicon Labs defines alternative VID/PID pairs for some chips that when used will automatically install drivers for Windows users without manual intervention. Unfortunately, these IDs are not recognized by the Linux module, so using these IDs improves user experience on one platform but degrades it on Linux. This patch addresses this problem. Signed-off-by: Karoly Pados Cc: stable Signed-off-by: Johan Hovold --- drivers/usb/serial/cp210x.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index eb6c26cbe579..14cf657247b6 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -143,8 +143,11 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x10C4, 0x8B34) }, /* Qivicon ZigBee USB Radio Stick */ { USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */ { USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */ + { USB_DEVICE(0x10C4, 0xEA63) }, /* Silicon Labs Windows Update (CP2101-4/CP2102N) */ { USB_DEVICE(0x10C4, 0xEA70) }, /* Silicon Labs factory default */ { USB_DEVICE(0x10C4, 0xEA71) }, /* Infinity GPS-MIC-1 Radio Monophone */ + { USB_DEVICE(0x10C4, 0xEA7A) }, /* Silicon Labs Windows Update (CP2105) */ + { USB_DEVICE(0x10C4, 0xEA7B) }, /* Silicon Labs Windows Update (CP2108) */ { USB_DEVICE(0x10C4, 0xF001) }, /* Elan Digital Systems USBscope50 */ { USB_DEVICE(0x10C4, 0xF002) }, /* Elan Digital Systems USBwave12 */ { USB_DEVICE(0x10C4, 0xF003) }, /* Elan Digital Systems USBpulse100 */ -- cgit v1.2.3 From 24160628a34af962ac99f2f58e547ac3c4cbd26f Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 18 Jun 2018 10:24:03 +0200 Subject: USB: serial: cp210x: add CESINEL device ids Add device ids for CESINEL products. Reported-by: Carlos Barcala Lara Cc: stable Signed-off-by: Johan Hovold --- drivers/usb/serial/cp210x.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index 14cf657247b6..ee0cc1d90b51 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -95,6 +95,9 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x10C4, 0x8156) }, /* B&G H3000 link cable */ { USB_DEVICE(0x10C4, 0x815E) }, /* Helicomm IP-Link 1220-DVM */ { USB_DEVICE(0x10C4, 0x815F) }, /* Timewave HamLinkUSB */ + { USB_DEVICE(0x10C4, 0x817C) }, /* CESINEL MEDCAL N Power Quality Monitor */ + { USB_DEVICE(0x10C4, 0x817D) }, /* CESINEL MEDCAL NT Power Quality Monitor */ + { USB_DEVICE(0x10C4, 0x817E) }, /* CESINEL MEDCAL S Power Quality Monitor */ { USB_DEVICE(0x10C4, 0x818B) }, /* AVIT Research USB to TTL */ { USB_DEVICE(0x10C4, 0x819F) }, /* MJS USB Toslink Switcher */ { USB_DEVICE(0x10C4, 0x81A6) }, /* ThinkOptics WavIt */ @@ -112,6 +115,9 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x10C4, 0x826B) }, /* Cygnal Integrated Products, Inc., Fasttrax GPS demonstration module */ { USB_DEVICE(0x10C4, 0x8281) }, /* Nanotec Plug & Drive */ { USB_DEVICE(0x10C4, 0x8293) }, /* Telegesis ETRX2USB */ + { USB_DEVICE(0x10C4, 0x82EF) }, /* CESINEL FALCO 6105 AC Power Supply */ + { USB_DEVICE(0x10C4, 0x82F1) }, /* CESINEL MEDCAL EFD Earth Fault Detector */ + { USB_DEVICE(0x10C4, 0x82F2) }, /* CESINEL MEDCAL ST Network Analyzer */ { USB_DEVICE(0x10C4, 0x82F4) }, /* Starizona MicroTouch */ { USB_DEVICE(0x10C4, 0x82F9) }, /* Procyon AVS */ { USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */ @@ -124,7 +130,9 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x10C4, 0x8470) }, /* Juniper Networks BX Series System Console */ { USB_DEVICE(0x10C4, 0x8477) }, /* Balluff RFID */ { USB_DEVICE(0x10C4, 0x84B6) }, /* Starizona Hyperion */ + { USB_DEVICE(0x10C4, 0x851E) }, /* CESINEL MEDCAL PT Network Analyzer */ { USB_DEVICE(0x10C4, 0x85A7) }, /* LifeScan OneTouch Verio IQ */ + { USB_DEVICE(0x10C4, 0x85B8) }, /* CESINEL ReCon T Energy Logger */ { USB_DEVICE(0x10C4, 0x85EA) }, /* AC-Services IBUS-IF */ { USB_DEVICE(0x10C4, 0x85EB) }, /* AC-Services CIS-IBUS */ { USB_DEVICE(0x10C4, 0x85F8) }, /* Virtenio Preon32 */ @@ -134,10 +142,13 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x10C4, 0x8857) }, /* CEL EM357 ZigBee USB Stick */ { USB_DEVICE(0x10C4, 0x88A4) }, /* MMB Networks ZigBee USB Device */ { USB_DEVICE(0x10C4, 0x88A5) }, /* Planet Innovation Ingeni ZigBee USB Device */ + { USB_DEVICE(0x10C4, 0x88FB) }, /* CESINEL MEDCAL STII Network Analyzer */ + { USB_DEVICE(0x10C4, 0x8938) }, /* CESINEL MEDCAL S II Network Analyzer */ { USB_DEVICE(0x10C4, 0x8946) }, /* Ketra N1 Wireless Interface */ { USB_DEVICE(0x10C4, 0x8962) }, /* Brim Brothers charging dock */ { USB_DEVICE(0x10C4, 0x8977) }, /* CEL MeshWorks DevKit Device */ { USB_DEVICE(0x10C4, 0x8998) }, /* KCF Technologies PRN */ + { USB_DEVICE(0x10C4, 0x89A4) }, /* CESINEL FTBC Flexible Thyristor Bridge Controller */ { USB_DEVICE(0x10C4, 0x8A2A) }, /* HubZ dual ZigBee and Z-Wave dongle */ { USB_DEVICE(0x10C4, 0x8A5E) }, /* CEL EM3588 ZigBee USB Stick Long Range */ { USB_DEVICE(0x10C4, 0x8B34) }, /* Qivicon ZigBee USB Radio Stick */ -- cgit v1.2.3 From 00908693c481f7298adf8cf4d2ff3dfbea8c375f Mon Sep 17 00:00:00 2001 From: Heikki Krogerus Date: Thu, 15 Jun 2017 12:57:30 +0300 Subject: usb: dwc3: pci: add support for Intel IceLake PCI IDs for Intel IceLake. Signed-off-by: Heikki Krogerus Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/dwc3-pci.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c index c961a94d136b..f57e7c94b8e5 100644 --- a/drivers/usb/dwc3/dwc3-pci.c +++ b/drivers/usb/dwc3/dwc3-pci.c @@ -34,6 +34,7 @@ #define PCI_DEVICE_ID_INTEL_GLK 0x31aa #define PCI_DEVICE_ID_INTEL_CNPLP 0x9dee #define PCI_DEVICE_ID_INTEL_CNPH 0xa36e +#define PCI_DEVICE_ID_INTEL_ICLLP 0x34ee #define PCI_INTEL_BXT_DSM_GUID "732b85d5-b7a7-4a1b-9ba0-4bbd00ffd511" #define PCI_INTEL_BXT_FUNC_PMU_PWR 4 @@ -289,6 +290,7 @@ static const struct pci_device_id dwc3_pci_id_table[] = { { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_GLK), }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CNPLP), }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CNPH), }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICLLP), }, { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_NL_USB), }, { } /* Terminating Entry */ }; -- cgit v1.2.3 From d52e4d0c0c428bf2ba35074a7495cdb28e2efbae Mon Sep 17 00:00:00 2001 From: Vincent Pelletier Date: Wed, 13 Jun 2018 11:05:06 +0000 Subject: usb: gadget: ffs: Fix BUG when userland exits with submitted AIO transfers This bug happens only when the UDC needs to sleep during usb_ep_dequeue, as is the case for (at least) dwc3. [ 382.200896] BUG: scheduling while atomic: screen/1808/0x00000100 [ 382.207124] 4 locks held by screen/1808: [ 382.211266] #0: (rcu_callback){....}, at: [] rcu_process_callbacks+0x260/0x440 [ 382.219949] #1: (rcu_read_lock_sched){....}, at: [] percpu_ref_switch_to_atomic_rcu+0xb0/0x130 [ 382.230034] #2: (&(&ctx->ctx_lock)->rlock){....}, at: [] free_ioctx_users+0x23/0xd0 [ 382.230096] #3: (&(&ffs->eps_lock)->rlock){....}, at: [] ffs_aio_cancel+0x20/0x60 [usb_f_fs] [ 382.230160] Modules linked in: usb_f_fs libcomposite configfs bnep btsdio bluetooth ecdh_generic brcmfmac brcmutil intel_powerclamp coretemp dwc3 kvm_intel ulpi udc_core kvm irqbypass crc32_pclmul crc32c_intel pcbc dwc3_pci aesni_intel aes_i586 crypto_simd cryptd ehci_pci ehci_hcd gpio_keys usbcore basincove_gpadc industrialio usb_common [ 382.230407] CPU: 1 PID: 1808 Comm: screen Not tainted 4.14.0-edison+ #117 [ 382.230416] Hardware name: Intel Corporation Merrifield/BODEGA BAY, BIOS 542 2015.01.21:18.19.48 [ 382.230425] Call Trace: [ 382.230438] [ 382.230466] dump_stack+0x47/0x62 [ 382.230498] __schedule_bug+0x61/0x80 [ 382.230522] __schedule+0x43/0x7a0 [ 382.230587] schedule+0x5f/0x70 [ 382.230625] dwc3_gadget_ep_dequeue+0x14c/0x270 [dwc3] [ 382.230669] ? do_wait_intr_irq+0x70/0x70 [ 382.230724] usb_ep_dequeue+0x19/0x90 [udc_core] [ 382.230770] ffs_aio_cancel+0x37/0x60 [usb_f_fs] [ 382.230798] kiocb_cancel+0x31/0x40 [ 382.230822] free_ioctx_users+0x4d/0xd0 [ 382.230858] percpu_ref_switch_to_atomic_rcu+0x10a/0x130 [ 382.230881] ? percpu_ref_exit+0x40/0x40 [ 382.230904] rcu_process_callbacks+0x2b3/0x440 [ 382.230965] __do_softirq+0xf8/0x26b [ 382.231011] ? __softirqentry_text_start+0x8/0x8 [ 382.231033] do_softirq_own_stack+0x22/0x30 [ 382.231042] [ 382.231071] irq_exit+0x45/0xc0 [ 382.231089] smp_apic_timer_interrupt+0x13c/0x150 [ 382.231118] apic_timer_interrupt+0x35/0x3c [ 382.231132] EIP: __copy_user_ll+0xe2/0xf0 [ 382.231142] EFLAGS: 00210293 CPU: 1 [ 382.231154] EAX: bfd4508c EBX: 00000004 ECX: 00000003 EDX: f3d8fe50 [ 382.231165] ESI: f3d8fe51 EDI: bfd4508d EBP: f3d8fe14 ESP: f3d8fe08 [ 382.231176] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 [ 382.231265] core_sys_select+0x25f/0x320 [ 382.231346] ? __wake_up_common_lock+0x62/0x80 [ 382.231399] ? tty_ldisc_deref+0x13/0x20 [ 382.231438] ? ldsem_up_read+0x1b/0x40 [ 382.231459] ? tty_ldisc_deref+0x13/0x20 [ 382.231479] ? tty_write+0x29f/0x2e0 [ 382.231514] ? n_tty_ioctl+0xe0/0xe0 [ 382.231541] ? tty_write_unlock+0x30/0x30 [ 382.231566] ? __vfs_write+0x22/0x110 [ 382.231604] ? security_file_permission+0x2f/0xd0 [ 382.231635] ? rw_verify_area+0xac/0x120 [ 382.231677] ? vfs_write+0x103/0x180 [ 382.231711] SyS_select+0x87/0xc0 [ 382.231739] ? SyS_write+0x42/0x90 [ 382.231781] do_fast_syscall_32+0xd6/0x1a0 [ 382.231836] entry_SYSENTER_32+0x47/0x71 [ 382.231848] EIP: 0xb7f75b05 [ 382.231857] EFLAGS: 00000246 CPU: 1 [ 382.231868] EAX: ffffffda EBX: 00000400 ECX: bfd4508c EDX: bfd4510c [ 382.231878] ESI: 00000000 EDI: 00000000 EBP: 00000000 ESP: bfd45020 [ 382.231889] DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b [ 382.232281] softirq: huh, entered softirq 9 RCU c10b4d90 with preempt_count 00000100, exited with 00000000? Tested-by: Sam Protsenko Signed-off-by: Vincent Pelletier Signed-off-by: Felipe Balbi --- drivers/usb/gadget/function/f_fs.c | 26 ++++++++++++++++++-------- 1 file changed, 18 insertions(+), 8 deletions(-) diff --git a/drivers/usb/gadget/function/f_fs.c b/drivers/usb/gadget/function/f_fs.c index dce9d12c7981..33e2030503fa 100644 --- a/drivers/usb/gadget/function/f_fs.c +++ b/drivers/usb/gadget/function/f_fs.c @@ -215,6 +215,7 @@ struct ffs_io_data { struct mm_struct *mm; struct work_struct work; + struct work_struct cancellation_work; struct usb_ep *ep; struct usb_request *req; @@ -1072,22 +1073,31 @@ ffs_epfile_open(struct inode *inode, struct file *file) return 0; } +static void ffs_aio_cancel_worker(struct work_struct *work) +{ + struct ffs_io_data *io_data = container_of(work, struct ffs_io_data, + cancellation_work); + + ENTER(); + + usb_ep_dequeue(io_data->ep, io_data->req); +} + static int ffs_aio_cancel(struct kiocb *kiocb) { struct ffs_io_data *io_data = kiocb->private; - struct ffs_epfile *epfile = kiocb->ki_filp->private_data; + struct ffs_data *ffs = io_data->ffs; int value; ENTER(); - spin_lock_irq(&epfile->ffs->eps_lock); - - if (likely(io_data && io_data->ep && io_data->req)) - value = usb_ep_dequeue(io_data->ep, io_data->req); - else + if (likely(io_data && io_data->ep && io_data->req)) { + INIT_WORK(&io_data->cancellation_work, ffs_aio_cancel_worker); + queue_work(ffs->io_completion_wq, &io_data->cancellation_work); + value = -EINPROGRESS; + } else { value = -EINVAL; - - spin_unlock_irq(&epfile->ffs->eps_lock); + } return value; } -- cgit v1.2.3 From 3ec148ebe3112b40c9a2c0c543bcb0cd1a3abd43 Mon Sep 17 00:00:00 2001 From: Jaejoong Kim Date: Thu, 14 Jun 2018 18:56:31 +0900 Subject: doc: usb: Fix typo in gadget_configfs documentation Fix the directory name from 'configfs' to 'configs'. Signed-off-by: Jaejoong Kim Signed-off-by: Felipe Balbi --- Documentation/usb/gadget_configfs.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/usb/gadget_configfs.txt b/Documentation/usb/gadget_configfs.txt index 635e57493709..b8cb38a98c19 100644 --- a/Documentation/usb/gadget_configfs.txt +++ b/Documentation/usb/gadget_configfs.txt @@ -226,7 +226,7 @@ $ rm configs/./ where . specify the configuration and is a symlink to a function being removed from the configuration, e.g.: -$ rm configfs/c.1/ncm.usb0 +$ rm configs/c.1/ncm.usb0 ... ... -- cgit v1.2.3 From 1ffba9058737af2ddeebc813faa8ea9b16bc892a Mon Sep 17 00:00:00 2001 From: Minas Harutyunyan Date: Tue, 12 Jun 2018 12:37:29 +0400 Subject: usb: dwc2: gadget: Fix issue in dwc2_gadget_start_isoc() In case of requests queue is empty reset EP target_frame to initial value. This allow restarting ISOC traffic in case when function driver queued requests with interruptions. Tested-by: Zeng Tao Signed-off-by: Minas Harutyunyan Signed-off-by: Felipe Balbi --- drivers/usb/dwc2/gadget.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c index f0d9ccf1d665..bb499fea6100 100644 --- a/drivers/usb/dwc2/gadget.c +++ b/drivers/usb/dwc2/gadget.c @@ -884,6 +884,7 @@ static void dwc2_gadget_start_isoc_ddma(struct dwc2_hsotg_ep *hs_ep) struct dwc2_dma_desc *desc; if (list_empty(&hs_ep->queue)) { + hs_ep->target_frame = TARGET_FRAME_INITIAL; dev_dbg(hsotg->dev, "%s: No requests in queue\n", __func__); return; } -- cgit v1.2.3 From 896e518883f18e601335908192e33426c1f599a4 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 31 May 2018 16:45:52 +0200 Subject: usb: dwc3: of-simple: fix use-after-free on remove The clocks have already been explicitly disabled and put as part of remove() so the runtime suspend callback must not be run when balancing the runtime PM usage count before returning. Fixes: 16adc674d0d6 ("usb: dwc3: add generic OF glue layer") Signed-off-by: Johan Hovold Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/dwc3-of-simple.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/usb/dwc3/dwc3-of-simple.c b/drivers/usb/dwc3/dwc3-of-simple.c index 6b3ccd542bd7..dbeff5e6ad14 100644 --- a/drivers/usb/dwc3/dwc3-of-simple.c +++ b/drivers/usb/dwc3/dwc3-of-simple.c @@ -165,8 +165,9 @@ static int dwc3_of_simple_remove(struct platform_device *pdev) reset_control_put(simple->resets); - pm_runtime_put_sync(dev); pm_runtime_disable(dev); + pm_runtime_put_noidle(dev); + pm_runtime_set_suspended(dev); return 0; } -- cgit v1.2.3 From 6e967d7e2c4822eba4847ec09037119a0418aaef Mon Sep 17 00:00:00 2001 From: Zeng Tao Date: Tue, 12 Jun 2018 22:49:06 +0800 Subject: usb: dwc2: gadget: fix packet drop issue in dwc2_gadget_handle_nak In ISOC transfer, when the NAK interrupt happens, we shouldn't complete a usb request, the current flow will complete one usb request with no hardware transfer, this will lead to a packet drop on the usb bus. Acked-by: Minas Harutyunyan Signed-off-by: Zeng Tao Signed-off-by: Felipe Balbi --- drivers/usb/dwc2/gadget.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c index bb499fea6100..bb5eb3c8132d 100644 --- a/drivers/usb/dwc2/gadget.c +++ b/drivers/usb/dwc2/gadget.c @@ -2818,9 +2818,6 @@ static void dwc2_gadget_handle_nak(struct dwc2_hsotg_ep *hs_ep) tmp = dwc2_hsotg_read_frameno(hsotg); if (using_desc_dma(hsotg)) { - dwc2_hsotg_complete_request(hsotg, hs_ep, - get_ep_head(hs_ep), 0); - hs_ep->target_frame = tmp; dwc2_gadget_incr_frame_num(hs_ep); dwc2_gadget_start_isoc_ddma(hs_ep); -- cgit v1.2.3 From 615277779f41a753e68f531613e344c54fdc95bf Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Tue, 12 Jun 2018 10:24:48 +0200 Subject: usb: dwc3: Only call clk_bulk_get() on devicetree instantiated devices Commit fe8abf332b8f ("usb: dwc3: support clocks and resets for DWC3 core") adds support for handling clocks and resets in the DWC3 core, so that for platforms following the standard devicetree bindings this does not need to be duplicated in all the different glue layers. These changes intended for devicetree based platforms introduce an uncoditional clk_bulk_get() in the core probe path. This leads to the following error being logged on x86/ACPI systems: [ 26.276783] dwc3 dwc3.3.auto: Failed to get clk 'ref': -2 This commits wraps the clk_bulk_get() in an if (dev->of_node) check so that it only is done on devicetree instantiated devices, fixing this error. Cc: Masahiro Yamada Reviewed-by: Masahiro Yamada Signed-off-by: Hans de Goede Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/core.c | 23 +++++++++++++---------- 1 file changed, 13 insertions(+), 10 deletions(-) diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index ea91310113b9..103807587dc6 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -1272,7 +1272,6 @@ static int dwc3_probe(struct platform_device *pdev) if (!dwc->clks) return -ENOMEM; - dwc->num_clks = ARRAY_SIZE(dwc3_core_clks); dwc->dev = dev; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); @@ -1307,15 +1306,19 @@ static int dwc3_probe(struct platform_device *pdev) if (IS_ERR(dwc->reset)) return PTR_ERR(dwc->reset); - ret = clk_bulk_get(dev, dwc->num_clks, dwc->clks); - if (ret == -EPROBE_DEFER) - return ret; - /* - * Clocks are optional, but new DT platforms should support all clocks - * as required by the DT-binding. - */ - if (ret) - dwc->num_clks = 0; + if (dev->of_node) { + dwc->num_clks = ARRAY_SIZE(dwc3_core_clks); + + ret = clk_bulk_get(dev, dwc->num_clks, dwc->clks); + if (ret == -EPROBE_DEFER) + return ret; + /* + * Clocks are optional, but new DT platforms should support all + * clocks as required by the DT-binding. + */ + if (ret) + dwc->num_clks = 0; + } ret = reset_control_deassert(dwc->reset); if (ret) -- cgit v1.2.3 From 21cbbc6bb7b4ba6aee303a3b4aef1578253724d8 Mon Sep 17 00:00:00 2001 From: Minas Harutyunyan Date: Tue, 12 Jun 2018 12:27:36 +0400 Subject: usb: dwc2: gadget: fix packet drop issue for ISOC OUT transfers In ISOC OUT transfer, when the OUT token received while EP disabled, we shouldn't complete a usb request. The current flow completed one usb request, this will lead to a packet drop to function driver. Signed-off-by: Minas Harutyunyan Signed-off-by: Felipe Balbi --- drivers/usb/dwc2/gadget.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c index bb5eb3c8132d..fa3b6f361074 100644 --- a/drivers/usb/dwc2/gadget.c +++ b/drivers/usb/dwc2/gadget.c @@ -2756,8 +2756,6 @@ static void dwc2_gadget_handle_out_token_ep_disabled(struct dwc2_hsotg_ep *ep) */ tmp = dwc2_hsotg_read_frameno(hsotg); - dwc2_hsotg_complete_request(hsotg, ep, get_ep_head(ep), 0); - if (using_desc_dma(hsotg)) { if (ep->target_frame == TARGET_FRAME_INITIAL) { /* Start first ISO Out */ -- cgit v1.2.3 From ba062ebb2cd561d404e0fba8ee4b3f5ebce7cbfc Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 13 Jun 2018 09:13:39 -0700 Subject: netfilter: nf_queue: augment nfqa_cfg_policy Three attributes are currently not verified, thus can trigger KMSAN warnings such as : BUG: KMSAN: uninit-value in __arch_swab32 arch/x86/include/uapi/asm/swab.h:10 [inline] BUG: KMSAN: uninit-value in __fswab32 include/uapi/linux/swab.h:59 [inline] BUG: KMSAN: uninit-value in nfqnl_recv_config+0x939/0x17d0 net/netfilter/nfnetlink_queue.c:1268 CPU: 1 PID: 4521 Comm: syz-executor120 Not tainted 4.17.0+ #5 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x185/0x1d0 lib/dump_stack.c:113 kmsan_report+0x188/0x2a0 mm/kmsan/kmsan.c:1117 __msan_warning_32+0x70/0xc0 mm/kmsan/kmsan_instr.c:620 __arch_swab32 arch/x86/include/uapi/asm/swab.h:10 [inline] __fswab32 include/uapi/linux/swab.h:59 [inline] nfqnl_recv_config+0x939/0x17d0 net/netfilter/nfnetlink_queue.c:1268 nfnetlink_rcv_msg+0xb2e/0xc80 net/netfilter/nfnetlink.c:212 netlink_rcv_skb+0x37e/0x600 net/netlink/af_netlink.c:2448 nfnetlink_rcv+0x2fe/0x680 net/netfilter/nfnetlink.c:513 netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline] netlink_unicast+0x1680/0x1750 net/netlink/af_netlink.c:1336 netlink_sendmsg+0x104f/0x1350 net/netlink/af_netlink.c:1901 sock_sendmsg_nosec net/socket.c:629 [inline] sock_sendmsg net/socket.c:639 [inline] ___sys_sendmsg+0xec8/0x1320 net/socket.c:2117 __sys_sendmsg net/socket.c:2155 [inline] __do_sys_sendmsg net/socket.c:2164 [inline] __se_sys_sendmsg net/socket.c:2162 [inline] __x64_sys_sendmsg+0x331/0x460 net/socket.c:2162 do_syscall_64+0x15b/0x230 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x43fd59 RSP: 002b:00007ffde0e30d28 EFLAGS: 00000213 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 000000000043fd59 RDX: 0000000000000000 RSI: 0000000020000080 RDI: 0000000000000003 RBP: 00000000006ca018 R08: 00000000004002c8 R09: 00000000004002c8 R10: 00000000004002c8 R11: 0000000000000213 R12: 0000000000401680 R13: 0000000000401710 R14: 0000000000000000 R15: 0000000000000000 Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:279 [inline] kmsan_internal_poison_shadow+0xb8/0x1b0 mm/kmsan/kmsan.c:189 kmsan_kmalloc+0x94/0x100 mm/kmsan/kmsan.c:315 kmsan_slab_alloc+0x10/0x20 mm/kmsan/kmsan.c:322 slab_post_alloc_hook mm/slab.h:446 [inline] slab_alloc_node mm/slub.c:2753 [inline] __kmalloc_node_track_caller+0xb35/0x11b0 mm/slub.c:4395 __kmalloc_reserve net/core/skbuff.c:138 [inline] __alloc_skb+0x2cb/0x9e0 net/core/skbuff.c:206 alloc_skb include/linux/skbuff.h:988 [inline] netlink_alloc_large_skb net/netlink/af_netlink.c:1182 [inline] netlink_sendmsg+0x76e/0x1350 net/netlink/af_netlink.c:1876 sock_sendmsg_nosec net/socket.c:629 [inline] sock_sendmsg net/socket.c:639 [inline] ___sys_sendmsg+0xec8/0x1320 net/socket.c:2117 __sys_sendmsg net/socket.c:2155 [inline] __do_sys_sendmsg net/socket.c:2164 [inline] __se_sys_sendmsg net/socket.c:2162 [inline] __x64_sys_sendmsg+0x331/0x460 net/socket.c:2162 do_syscall_64+0x15b/0x230 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: fdb694a01f1f ("netfilter: Add fail-open support") Fixes: 829e17a1a602 ("[NETFILTER]: nfnetlink_queue: allow changing queue length through netlink") Signed-off-by: Eric Dumazet Reported-by: syzbot Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nfnetlink_queue.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/netfilter/nfnetlink_queue.c b/net/netfilter/nfnetlink_queue.c index 4ccd2988f9db..ea4ba551abb2 100644 --- a/net/netfilter/nfnetlink_queue.c +++ b/net/netfilter/nfnetlink_queue.c @@ -1243,6 +1243,9 @@ static int nfqnl_recv_unsupp(struct net *net, struct sock *ctnl, static const struct nla_policy nfqa_cfg_policy[NFQA_CFG_MAX+1] = { [NFQA_CFG_CMD] = { .len = sizeof(struct nfqnl_msg_config_cmd) }, [NFQA_CFG_PARAMS] = { .len = sizeof(struct nfqnl_msg_config_params) }, + [NFQA_CFG_QUEUE_MAXLEN] = { .type = NLA_U32 }, + [NFQA_CFG_MASK] = { .type = NLA_U32 }, + [NFQA_CFG_FLAGS] = { .type = NLA_U32 }, }; static const struct nf_queue_handler nfqh = { -- cgit v1.2.3 From 9ce7bc036ae4cfe3393232c86e9e1fea2153c237 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 13 Jun 2018 10:11:56 -0700 Subject: netfilter: ipv6: nf_defrag: reduce struct net memory waste It is a waste of memory to use a full "struct netns_sysctl_ipv6" while only one pointer is really used, considering netns_sysctl_ipv6 keeps growing. Also, since "struct netns_frags" has cache line alignment, it is better to move the frags_hdr pointer outside, otherwise we spend a full cache line for this pointer. This saves 192 bytes of memory per netns. Fixes: c038a767cd69 ("ipv6: add a new namespace for nf_conntrack_reasm") Signed-off-by: Eric Dumazet Signed-off-by: Pablo Neira Ayuso --- include/net/net_namespace.h | 1 + include/net/netns/ipv6.h | 1 - net/ipv6/netfilter/nf_conntrack_reasm.c | 6 +++--- 3 files changed, 4 insertions(+), 4 deletions(-) diff --git a/include/net/net_namespace.h b/include/net/net_namespace.h index 47e35cce3b64..a71264d75d7f 100644 --- a/include/net/net_namespace.h +++ b/include/net/net_namespace.h @@ -128,6 +128,7 @@ struct net { #endif #if IS_ENABLED(CONFIG_NF_DEFRAG_IPV6) struct netns_nf_frag nf_frag; + struct ctl_table_header *nf_frag_frags_hdr; #endif struct sock *nfnl; struct sock *nfnl_stash; diff --git a/include/net/netns/ipv6.h b/include/net/netns/ipv6.h index c978a31b0f84..762ac9931b62 100644 --- a/include/net/netns/ipv6.h +++ b/include/net/netns/ipv6.h @@ -109,7 +109,6 @@ struct netns_ipv6 { #if IS_ENABLED(CONFIG_NF_DEFRAG_IPV6) struct netns_nf_frag { - struct netns_sysctl_ipv6 sysctl; struct netns_frags frags; }; #endif diff --git a/net/ipv6/netfilter/nf_conntrack_reasm.c b/net/ipv6/netfilter/nf_conntrack_reasm.c index 5e0332014c17..a452d99c9f52 100644 --- a/net/ipv6/netfilter/nf_conntrack_reasm.c +++ b/net/ipv6/netfilter/nf_conntrack_reasm.c @@ -107,7 +107,7 @@ static int nf_ct_frag6_sysctl_register(struct net *net) if (hdr == NULL) goto err_reg; - net->nf_frag.sysctl.frags_hdr = hdr; + net->nf_frag_frags_hdr = hdr; return 0; err_reg: @@ -121,8 +121,8 @@ static void __net_exit nf_ct_frags6_sysctl_unregister(struct net *net) { struct ctl_table *table; - table = net->nf_frag.sysctl.frags_hdr->ctl_table_arg; - unregister_net_sysctl_table(net->nf_frag.sysctl.frags_hdr); + table = net->nf_frag_frags_hdr->ctl_table_arg; + unregister_net_sysctl_table(net->nf_frag_frags_hdr); if (!net_eq(net, &init_net)) kfree(table); } -- cgit v1.2.3 From ad9852af97587b8abe8102f9ddcb05c9769656f6 Mon Sep 17 00:00:00 2001 From: Gao Feng Date: Wed, 13 Jun 2018 12:26:13 +0800 Subject: netfilter: nf_ct_helper: Fix possible panic after nf_conntrack_helper_unregister The helper module would be unloaded after nf_conntrack_helper_unregister, so it may cause a possible panic caused by race. nf_ct_iterate_destroy(unhelp, me) reset the helper of conntrack as NULL, but maybe someone has gotten the helper pointer during this period. Then it would panic, when it accesses the helper and the module was unloaded. Take an example as following: CPU0 CPU1 ctnetlink_dump_helpinfo helper = rcu_dereference(help->helper); unhelp set helper as NULL unload helper module helper->to_nlattr(skb, ct); As above, the cpu0 tries to access the helper and its module is unloaded, then the panic happens. Signed-off-by: Gao Feng Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nf_conntrack_helper.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/net/netfilter/nf_conntrack_helper.c b/net/netfilter/nf_conntrack_helper.c index 551a1eddf0fa..a75b11c39312 100644 --- a/net/netfilter/nf_conntrack_helper.c +++ b/net/netfilter/nf_conntrack_helper.c @@ -465,6 +465,11 @@ void nf_conntrack_helper_unregister(struct nf_conntrack_helper *me) nf_ct_expect_iterate_destroy(expect_iter_me, NULL); nf_ct_iterate_destroy(unhelp, me); + + /* Maybe someone has gotten the helper already when unhelp above. + * So need to wait it. + */ + synchronize_rcu(); } EXPORT_SYMBOL_GPL(nf_conntrack_helper_unregister); -- cgit v1.2.3 From 9f3cb9b71bc3166f27ceffe0b7295c464c638151 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Tue, 5 Jun 2018 09:22:37 -0700 Subject: MAINAINTERS: Corrected Broadcom Northstar2 entry While moving the Northstar 2 DTS into a dedicated directory, the corresponding MAINTAINERS file entry was not updated accordingly, fix that. Fixes: 63a913c157f5 ("arm64: dts: move ns2 into northstar2 directory") Signed-off-by: Florian Fainelli --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 9d5eeff51b5f..67b014ea81f2 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2971,7 +2971,7 @@ N: bcm585* N: bcm586* N: bcm88312 N: hr2 -F: arch/arm64/boot/dts/broadcom/ns2* +F: arch/arm64/boot/dts/broadcom/northstar2/* F: drivers/clk/bcm/clk-ns* F: drivers/pinctrl/bcm/pinctrl-ns* -- cgit v1.2.3 From d64324acdb7052b08b13ffc8c12af232c6a29afd Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Tue, 5 Jun 2018 09:24:55 -0700 Subject: MAINTAINERS: Update Broadcom iProc entry with Stingray Update the MAINTAINERS file to cover the "stingray" pattern and a few files under arch/arm64/boot/dts/broadcom/* as well as the clock driver and binding. Signed-off-by: Florian Fainelli --- MAINTAINERS | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 67b014ea81f2..c78feb02a8c9 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2971,9 +2971,13 @@ N: bcm585* N: bcm586* N: bcm88312 N: hr2 +N: stingray F: arch/arm64/boot/dts/broadcom/northstar2/* +F: arch/arm64/boot/dts/broadcom/stingray/* F: drivers/clk/bcm/clk-ns* +F: drivers/clk/bcm/clk-sr* F: drivers/pinctrl/bcm/pinctrl-ns* +F: include/dt-bindings/clock/bcm-sr* BROADCOM KONA GPIO DRIVER M: Ray Jui -- cgit v1.2.3 From a3e32e78a40017756c71ef6dad429ffe3301126a Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Mon, 11 Jun 2018 15:47:12 -0700 Subject: ARM: dts: NSP: Fix i2c controller interrupt type The i2c controller should use IRQ_TYPE_LEVEL_HIGH instead of IRQ_TYPE_NONE. Fixes: 0f9f27a36d09 ("ARM: dts: NSP: Add I2C support to the DT") Signed-off-by: Florian Fainelli --- arch/arm/boot/dts/bcm-nsp.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi index dcc55aa84583..c6aa62386941 100644 --- a/arch/arm/boot/dts/bcm-nsp.dtsi +++ b/arch/arm/boot/dts/bcm-nsp.dtsi @@ -391,7 +391,7 @@ reg = <0x38000 0x50>; #address-cells = <1>; #size-cells = <0>; - interrupts = ; + interrupts = ; clock-frequency = <100000>; dma-coherent; status = "disabled"; -- cgit v1.2.3 From 403fde644855bc71318c8db65646383e22653b13 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Mon, 11 Jun 2018 15:47:13 -0700 Subject: ARM: dts: NSP: Fix PCIe controllers interrupt types The interrupts for the PCIe controllers should all be of type IRQ_TYPE_LEVEL_HIGH instead of IRQ_TYPE_NONE. Fixes: d71eb9412088 ("ARM: dts: NSP: Add MSI support on PCI") Fixes: 522199029fdc ("ARM: dts: NSP: Fix PCIE DT issue") Signed-off-by: Florian Fainelli --- arch/arm/boot/dts/bcm-nsp.dtsi | 30 +++++++++++++++--------------- 1 file changed, 15 insertions(+), 15 deletions(-) diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi index c6aa62386941..09ba85046322 100644 --- a/arch/arm/boot/dts/bcm-nsp.dtsi +++ b/arch/arm/boot/dts/bcm-nsp.dtsi @@ -496,7 +496,7 @@ #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 131 IRQ_TYPE_NONE>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; linux,pci-domain = <0>; @@ -519,10 +519,10 @@ compatible = "brcm,iproc-msi"; msi-controller; interrupt-parent = <&gic>; - interrupts = , - , - , - ; + interrupts = , + , + , + ; brcm,pcie-msi-inten; }; }; @@ -533,7 +533,7 @@ #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 137 IRQ_TYPE_NONE>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>; linux,pci-domain = <1>; @@ -556,10 +556,10 @@ compatible = "brcm,iproc-msi"; msi-controller; interrupt-parent = <&gic>; - interrupts = , - , - , - ; + interrupts = , + , + , + ; brcm,pcie-msi-inten; }; }; @@ -570,7 +570,7 @@ #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 143 IRQ_TYPE_NONE>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; linux,pci-domain = <2>; @@ -593,10 +593,10 @@ compatible = "brcm,iproc-msi"; msi-controller; interrupt-parent = <&gic>; - interrupts = , - , - , - ; + interrupts = , + , + , + ; brcm,pcie-msi-inten; }; }; -- cgit v1.2.3 From dbe4a39331b7aa8bcac8ef2da780724e1af1619a Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Mon, 11 Jun 2018 15:47:14 -0700 Subject: ARM: dts: HR2: Fix interrupt types for i2c and PCIe The i2c and PCIe controllers had an incorrect type which should have been set to IRQ_TYPE_LEVEL_HIGH, fix that. Fixes: b9099ec754b5 ("ARM: dts: Add Broadcom Hurricane 2 DTS include file") Signed-off-by: Florian Fainelli --- arch/arm/boot/dts/bcm-hr2.dtsi | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) diff --git a/arch/arm/boot/dts/bcm-hr2.dtsi b/arch/arm/boot/dts/bcm-hr2.dtsi index 3f9cedd8011f..3084a7c95733 100644 --- a/arch/arm/boot/dts/bcm-hr2.dtsi +++ b/arch/arm/boot/dts/bcm-hr2.dtsi @@ -264,7 +264,7 @@ reg = <0x38000 0x50>; #address-cells = <1>; #size-cells = <0>; - interrupts = ; + interrupts = ; clock-frequency = <100000>; }; @@ -279,7 +279,7 @@ reg = <0x3b000 0x50>; #address-cells = <1>; #size-cells = <0>; - interrupts = ; + interrupts = ; clock-frequency = <100000>; }; }; @@ -300,7 +300,7 @@ #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 186 IRQ_TYPE_NONE>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; linux,pci-domain = <0>; @@ -322,10 +322,10 @@ compatible = "brcm,iproc-msi"; msi-controller; interrupt-parent = <&gic>; - interrupts = , - , - , - ; + interrupts = , + , + , + ; brcm,pcie-msi-inten; }; }; @@ -336,7 +336,7 @@ #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 192 IRQ_TYPE_NONE>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>; linux,pci-domain = <1>; @@ -358,10 +358,10 @@ compatible = "brcm,iproc-msi"; msi-controller; interrupt-parent = <&gic>; - interrupts = , - , - , - ; + interrupts = , + , + , + ; brcm,pcie-msi-inten; }; }; -- cgit v1.2.3 From a0a8338e905734518ab9b10b06e7fd0201228f8b Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Mon, 11 Jun 2018 15:53:40 -0700 Subject: ARM: dts: BCM5301x: Fix i2c controller interrupt type The i2c controller should be using IRQ_TYPE_LEVEL_HIGH, fix that. Fixes: bb097e3e0045 ("ARM: dts: BCM5301X: Add I2C support to the DT") Signed-off-by: Florian Fainelli --- arch/arm/boot/dts/bcm5301x.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi index 9a076c409f4e..ef995e50ee12 100644 --- a/arch/arm/boot/dts/bcm5301x.dtsi +++ b/arch/arm/boot/dts/bcm5301x.dtsi @@ -365,7 +365,7 @@ i2c0: i2c@18009000 { compatible = "brcm,iproc-i2c"; reg = <0x18009000 0x50>; - interrupts = ; + interrupts = ; #address-cells = <1>; #size-cells = <0>; clock-frequency = <100000>; -- cgit v1.2.3 From 71ca3409703b62b6a092d0d9d13f366c121bc5d3 Mon Sep 17 00:00:00 2001 From: Ray Jui Date: Tue, 12 Jun 2018 13:21:27 -0700 Subject: ARM: dts: Cygnus: Fix I2C controller interrupt type Fix I2C controller interrupt to use IRQ_TYPE_LEVEL_HIGH for Broadcom Cygnus SoC. Fixes: b51c05a331ff ("ARM: dts: add I2C device nodes for Broadcom Cygnus") Signed-off-by: Ray Jui Signed-off-by: Florian Fainelli --- arch/arm/boot/dts/bcm-cygnus.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi index 9fe4f5a6379e..835a6f736da4 100644 --- a/arch/arm/boot/dts/bcm-cygnus.dtsi +++ b/arch/arm/boot/dts/bcm-cygnus.dtsi @@ -216,7 +216,7 @@ reg = <0x18008000 0x100>; #address-cells = <1>; #size-cells = <0>; - interrupts = ; + interrupts = ; clock-frequency = <100000>; status = "disabled"; }; @@ -245,7 +245,7 @@ reg = <0x1800b000 0x100>; #address-cells = <1>; #size-cells = <0>; - interrupts = ; + interrupts = ; clock-frequency = <100000>; status = "disabled"; }; -- cgit v1.2.3 From 6cb1628ad3506b315cdddd7676db0ff2af378d28 Mon Sep 17 00:00:00 2001 From: Ray Jui Date: Tue, 12 Jun 2018 13:21:28 -0700 Subject: ARM: dts: Cygnus: Fix PCIe controller interrupt type Fix PCIe controller interrupt to use IRQ_TYPE_LEVEL_HIGH for Broadcom Cygnus SoC Fixes: cd590b50a936 ("ARM: dts: enable PCIe support for Cygnus") Fixes: f6b889358a82 ("ARM: dts: Enable MSI support for Broadcom Cygnus") Signed-off-by: Ray Jui Signed-off-by: Florian Fainelli --- arch/arm/boot/dts/bcm-cygnus.dtsi | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi index 835a6f736da4..2c4df2d2d4a6 100644 --- a/arch/arm/boot/dts/bcm-cygnus.dtsi +++ b/arch/arm/boot/dts/bcm-cygnus.dtsi @@ -256,7 +256,7 @@ #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 100 IRQ_TYPE_NONE>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; linux,pci-domain = <0>; @@ -278,10 +278,10 @@ compatible = "brcm,iproc-msi"; msi-controller; interrupt-parent = <&gic>; - interrupts = , - , - , - ; + interrupts = , + , + , + ; }; }; @@ -291,7 +291,7 @@ #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 106 IRQ_TYPE_NONE>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; linux,pci-domain = <1>; @@ -313,10 +313,10 @@ compatible = "brcm,iproc-msi"; msi-controller; interrupt-parent = <&gic>; - interrupts = , - , - , - ; + interrupts = , + , + , + ; }; }; -- cgit v1.2.3 From eba92503e980c08ac353d0d669d0bb143979abcd Mon Sep 17 00:00:00 2001 From: Scott Branden Date: Fri, 18 May 2018 08:21:20 -0700 Subject: arm64: dts: specify 1.8V EMMC capabilities for bcm958742k Specify 1.8V EMMC capabilities for bcm958742k board to indicate support for UHS mode. Fixes: d4b4aba6be8a ("arm64: dts: Initial DTS files for Broadcom Stingray SOC") Signed-off-by: Scott Branden Signed-off-by: Florian Fainelli --- arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dts | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dts b/arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dts index eb6f08cdbd79..77efa28c4dd5 100644 --- a/arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dts +++ b/arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dts @@ -43,6 +43,10 @@ enet-phy-lane-swap; }; +&sdio0 { + mmc-ddr-1_8v; +}; + &uart2 { status = "okay"; }; -- cgit v1.2.3 From 37c2bd81a86ebb1cc934bf52a29c33d6f9abff7f Mon Sep 17 00:00:00 2001 From: Scott Branden Date: Tue, 22 May 2018 10:01:39 -0700 Subject: arm64: dts: specify 1.8V EMMC capabilities for bcm958742t Specify 1.8V EMMC capabilities for bcm958742t board to indicate support for UHS mode. Fixes: d4b4aba6be8a ("arm64: dts: Initial DTS files for Broadcom Stingray SOC") Signed-off-by: Scott Branden Signed-off-by: Florian Fainelli --- arch/arm64/boot/dts/broadcom/stingray/bcm958742t.dts | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm64/boot/dts/broadcom/stingray/bcm958742t.dts b/arch/arm64/boot/dts/broadcom/stingray/bcm958742t.dts index 5084b037320f..55ba495ef56e 100644 --- a/arch/arm64/boot/dts/broadcom/stingray/bcm958742t.dts +++ b/arch/arm64/boot/dts/broadcom/stingray/bcm958742t.dts @@ -42,3 +42,7 @@ &gphy0 { enet-phy-lane-swap; }; + +&sdio0 { + mmc-ddr-1_8v; +}; -- cgit v1.2.3 From e605c287deed45624e8d35a15e3f0b4faab1a62d Mon Sep 17 00:00:00 2001 From: Ray Jui Date: Tue, 12 Jun 2018 13:21:29 -0700 Subject: arm64: dts: ns2: Fix I2C controller interrupt type Fix I2C controller interrupt to use IRQ_TYPE_LEVEL_HIGH for Broadcom NS2 SoC. Fixes: 7ac674e8df7a ("arm64: dts: Add I2C nodes for NS2") Signed-off-by: Ray Jui Signed-off-by: Florian Fainelli --- arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi index 4a2a6af8e752..c0e48966a5e2 100644 --- a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi +++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi @@ -566,7 +566,7 @@ reg = <0x66080000 0x100>; #address-cells = <1>; #size-cells = <0>; - interrupts = ; + interrupts = ; clock-frequency = <100000>; status = "disabled"; }; @@ -594,7 +594,7 @@ reg = <0x660b0000 0x100>; #address-cells = <1>; #size-cells = <0>; - interrupts = ; + interrupts = ; clock-frequency = <100000>; status = "disabled"; }; -- cgit v1.2.3 From d0b8aed9e80ab526dbb04020bfc94ecea7bddb44 Mon Sep 17 00:00:00 2001 From: Ray Jui Date: Tue, 12 Jun 2018 13:21:30 -0700 Subject: arm64: dts: ns2: Fix PCIe controller interrupt type Fix PCIe controller interrupt to use IRQ_TYPE_LEVEL_HIGH for Broadcom NS2 SoC. Fixes: fd5e5dd56a2f ("arm64: dts: Add PCIe0 and PCIe4 DT nodes for NS2") Signed-off-by: Ray Jui Signed-off-by: Florian Fainelli --- arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi index c0e48966a5e2..4057197048dc 100644 --- a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi +++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi @@ -118,7 +118,7 @@ #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 281 IRQ_TYPE_NONE>; + interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>; linux,pci-domain = <0>; @@ -149,7 +149,7 @@ #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 305 IRQ_TYPE_NONE>; + interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; linux,pci-domain = <4>; -- cgit v1.2.3 From bfc9dfdcb6e9493de5d4fe0d3ed3ce57672f8d07 Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Wed, 13 Jun 2018 08:39:49 -0700 Subject: MD: cleanup resources in failure We need destroy the memory pool in failure Signed-off-by: Shaohua Li --- drivers/md/md.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/md/md.c b/drivers/md/md.c index 29b0cd9ec951..994aed2f9dff 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -5547,7 +5547,8 @@ int md_run(struct mddev *mddev) else pr_warn("md: personality for level %s is not loaded!\n", mddev->clevel); - return -EINVAL; + err = -EINVAL; + goto abort; } spin_unlock(&pers_lock); if (mddev->level != pers->level) { @@ -5560,7 +5561,8 @@ int md_run(struct mddev *mddev) pers->start_reshape == NULL) { /* This personality cannot handle reshaping... */ module_put(pers->owner); - return -EINVAL; + err = -EINVAL; + goto abort; } if (pers->sync_request) { @@ -5629,7 +5631,7 @@ int md_run(struct mddev *mddev) mddev->private = NULL; module_put(pers->owner); bitmap_destroy(mddev); - return err; + goto abort; } if (mddev->queue) { bool nonrot = true; -- cgit v1.2.3 From 75af23c4736c5633894ea0baf9bca1cf6b248ca4 Mon Sep 17 00:00:00 2001 From: Ray Jui Date: Tue, 12 Jun 2018 13:21:31 -0700 Subject: arm64: dts: Stingray: Fix I2C controller interrupt type Fix I2C controller interrupt to use IRQ_TYPE_LEVEL_HIGH for Broadcom Stingray SoC. Fixes: 1256ea18875d ("arm64: dts: Add I2C DT nodes for Stingray SoC") Signed-off-by: Ray Jui Signed-off-by: Florian Fainelli --- arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi index 99aaff0b6d72..b203152ad67c 100644 --- a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi +++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi @@ -409,7 +409,7 @@ reg = <0x000b0000 0x100>; #address-cells = <1>; #size-cells = <0>; - interrupts = ; + interrupts = ; clock-frequency = <100000>; status = "disabled"; }; @@ -453,7 +453,7 @@ reg = <0x000e0000 0x100>; #address-cells = <1>; #size-cells = <0>; - interrupts = ; + interrupts = ; clock-frequency = <100000>; status = "disabled"; }; -- cgit v1.2.3 From a45fc268db20ecd859bb61e25045912b3194b5e6 Mon Sep 17 00:00:00 2001 From: Hoan Tran Date: Thu, 7 Jun 2018 14:35:01 +0100 Subject: drivers/perf: xgene_pmu: Fix IOB SLOW PMU parser error This patch fixes the below parser error of the IOB SLOW PMU. # perf stat -a -e iob-slow0/cycle-count/ sleep 1 evenf syntax error: 'iob-slow0/cycle-count/' \___ parser error It replaces the "-" character by "_" character inside the PMU name. Signed-off-by: Hoan Tran Signed-off-by: Will Deacon --- drivers/perf/xgene_pmu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/perf/xgene_pmu.c b/drivers/perf/xgene_pmu.c index 6bdb1dad805f..0e31f1392a53 100644 --- a/drivers/perf/xgene_pmu.c +++ b/drivers/perf/xgene_pmu.c @@ -1463,7 +1463,7 @@ static char *xgene_pmu_dev_name(struct device *dev, u32 type, int id) case PMU_TYPE_IOB: return devm_kasprintf(dev, GFP_KERNEL, "iob%d", id); case PMU_TYPE_IOB_SLOW: - return devm_kasprintf(dev, GFP_KERNEL, "iob-slow%d", id); + return devm_kasprintf(dev, GFP_KERNEL, "iob_slow%d", id); case PMU_TYPE_MCB: return devm_kasprintf(dev, GFP_KERNEL, "mcb%d", id); case PMU_TYPE_MC: -- cgit v1.2.3 From 109c4d18e57445afcaf728b8716a69375a3daab2 Mon Sep 17 00:00:00 2001 From: Ayan Kumar Halder Date: Fri, 20 Apr 2018 15:44:57 +0100 Subject: drm/arm/malidp: Ensure that the crtcs are shutdown before removing any encoder/connector One needs to ensure that the crtcs are shutdown so that the drm_crtc_state->connector_mask reflects that no connectors are currently active. Further, it reduces the reference count for each connector. This ensures that the connectors and encoders can be cleanly removed either when _unbind is called for the corresponding drivers or by drm_mode_config_cleanup(). We need drm_atomic_helper_shutdown() to be called before component_unbind_all() otherwise the connectors attached to the component device will have the wrong reference count value and will not be cleanly removed. Signed-off-by: Ayan Kumar Halder Acked-by: Liviu Dudau Signed-off-by: Liviu Dudau --- drivers/gpu/drm/arm/malidp_drv.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/arm/malidp_drv.c b/drivers/gpu/drm/arm/malidp_drv.c index 8d20faa198cf..0a788d76ed5f 100644 --- a/drivers/gpu/drm/arm/malidp_drv.c +++ b/drivers/gpu/drm/arm/malidp_drv.c @@ -278,7 +278,6 @@ static int malidp_init(struct drm_device *drm) static void malidp_fini(struct drm_device *drm) { - drm_atomic_helper_shutdown(drm); drm_mode_config_cleanup(drm); } @@ -646,6 +645,7 @@ vblank_fail: malidp_de_irq_fini(drm); drm->irq_enabled = false; irq_init_fail: + drm_atomic_helper_shutdown(drm); component_unbind_all(dev, drm); bind_fail: of_node_put(malidp->crtc.port); @@ -681,6 +681,7 @@ static void malidp_unbind(struct device *dev) malidp_se_irq_fini(drm); malidp_de_irq_fini(drm); drm->irq_enabled = false; + drm_atomic_helper_shutdown(drm); component_unbind_all(dev, drm); of_node_put(malidp->crtc.port); malidp->crtc.port = NULL; -- cgit v1.2.3 From 89610dc2c235e7b02bb9fba0ce247e12d4dde7cd Mon Sep 17 00:00:00 2001 From: Alison Wang Date: Tue, 24 Apr 2018 10:42:32 +0800 Subject: drm: mali-dp: Enable Global SE interrupts mask for DP500 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In the situation that DE and SE aren’t shared the same interrupt number, the Global SE interrupts mask bit MASK_IRQ_EN in MASKIRQ must be set, or else other mask bits will not work and no SE interrupt will occur. This patch enables MASK_IRQ_EN for SE to fix this problem. Signed-off-by: Alison Wang Acked-by: Liviu Dudau Signed-off-by: Liviu Dudau --- drivers/gpu/drm/arm/malidp_hw.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/arm/malidp_hw.c b/drivers/gpu/drm/arm/malidp_hw.c index d789b46dc817..069783e715f1 100644 --- a/drivers/gpu/drm/arm/malidp_hw.c +++ b/drivers/gpu/drm/arm/malidp_hw.c @@ -634,7 +634,8 @@ const struct malidp_hw malidp_device[MALIDP_MAX_DEVICES] = { .vsync_irq = MALIDP500_DE_IRQ_VSYNC, }, .se_irq_map = { - .irq_mask = MALIDP500_SE_IRQ_CONF_MODE, + .irq_mask = MALIDP500_SE_IRQ_CONF_MODE | + MALIDP500_SE_IRQ_GLOBAL, .vsync_irq = 0, }, .dc_irq_map = { -- cgit v1.2.3 From ad7fda2e378f4356df621a39655f7c200b495d81 Mon Sep 17 00:00:00 2001 From: Ayan Kumar Halder Date: Tue, 10 Apr 2018 19:25:03 +0100 Subject: drm/arm/malidp: Preserve LAYER_FORMAT contents when setting format On some Mali-DP processors, the LAYER_FORMAT register contains fields other than the format. These bits were unconditionally cleared when setting the pixel format, whereas they should be preserved at their reset values. Reported-by: Brian Starkey Reported-by: Liviu Dudau Signed-off-by: Ayan Kumar halder Acked-by: Liviu Dudau Signed-off-by: Liviu Dudau --- drivers/gpu/drm/arm/malidp_planes.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/arm/malidp_planes.c b/drivers/gpu/drm/arm/malidp_planes.c index 7a44897c50fe..4af3c1fabb23 100644 --- a/drivers/gpu/drm/arm/malidp_planes.c +++ b/drivers/gpu/drm/arm/malidp_planes.c @@ -23,6 +23,7 @@ /* Layer specific register offsets */ #define MALIDP_LAYER_FORMAT 0x000 +#define LAYER_FORMAT_MASK 0x3f #define MALIDP_LAYER_CONTROL 0x004 #define LAYER_ENABLE (1 << 0) #define LAYER_FLOWCFG_MASK 7 @@ -337,7 +338,9 @@ static void malidp_de_plane_update(struct drm_plane *plane, dest_w = plane->state->crtc_w; dest_h = plane->state->crtc_h; - malidp_hw_write(mp->hwdev, ms->format, mp->layer->base); + val = malidp_hw_read(mp->hwdev, mp->layer->base); + val = (val & ~LAYER_FORMAT_MASK) | ms->format; + malidp_hw_write(mp->hwdev, val, mp->layer->base); for (i = 0; i < ms->n_planes; i++) { /* calculate the offset for the layer's plane registers */ -- cgit v1.2.3 From c6cf387ec56c19028333274747bbb4ae145a2d13 Mon Sep 17 00:00:00 2001 From: Ayan Kumar Halder Date: Mon, 18 Jun 2018 18:08:43 +0100 Subject: drm/mali-dp: Rectify the width and height passed to rotmem_required() The width and height needs to be swapped Signed-off-by: Ayan Kumar halder Reviewed-by: Brian Starkey Reviewed-by: Alexandru Gheorghe Acked-by: Liviu Dudau [rebased on top of v4.18-rc1] Signed-off-by: Liviu Dudau --- drivers/gpu/drm/arm/malidp_planes.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/arm/malidp_planes.c b/drivers/gpu/drm/arm/malidp_planes.c index 4af3c1fabb23..29409a65d864 100644 --- a/drivers/gpu/drm/arm/malidp_planes.c +++ b/drivers/gpu/drm/arm/malidp_planes.c @@ -236,8 +236,8 @@ static int malidp_de_plane_check(struct drm_plane *plane, if (state->rotation & MALIDP_ROTATED_MASK) { int val; - val = mp->hwdev->hw->rotmem_required(mp->hwdev, state->crtc_h, - state->crtc_w, + val = mp->hwdev->hw->rotmem_required(mp->hwdev, state->crtc_w, + state->crtc_h, fb->format->format); if (val < 0) return val; -- cgit v1.2.3 From 6c3796d130ed2860489885a934dcb7bb334d5eb0 Mon Sep 17 00:00:00 2001 From: "bstroesser@ts.fujitsu.com" Date: Thu, 24 May 2018 18:49:41 +0200 Subject: scsi: target: tcmu: add read length support Generally target core and TCMUser seem to work fine for tape devices and media changers. But there is at least one situation where TCMUser is not able to support sequential access device emulation correctly. The situation is when an initiator sends a SCSI READ CDB with a length that is greater than the length of the tape block to read. We can distinguish two subcases: A) The initiator sent the READ CDB with the SILI bit being set. In this case the sequential access device has to transfer the data from the tape block (only the length of the tape block) and transmit a good status. The current interface between TCMUser and the userspace does not support reduction of the read data size by the userspace program. The patch below fixes this subcase by allowing the userspace program to specify a reduced data size in read direction. B) The initiator sent the READ CDB with the SILI bit not being set. In this case the sequential access device has to transfer the data from the tape block as in A), but additionally has to transmit CHECK CONDITION with the ILI bit set and NO SENSE in the sensebytes. The information field in the sensebytes must contain the residual count. With the below patch a user space program can specify the real read data length and appropriate sensebytes. TCMUser then uses the se_cmd flag SCF_TREAT_READ_AS_NORMAL, to force target core to transmit the real data size and the sensebytes. Note: the flag SCF_TREAT_READ_AS_NORMAL is introduced by Lee Duncan's patch "[PATCH v4] target: transport should handle st FM/EOM/ILI reads" from Tue, 15 May 2018 18:25:24 -0700. Signed-off-by: Bodo Stroesser Acked-by: Mike Christie Reviewed-by: Lee Duncan Signed-off-by: Martin K. Petersen --- drivers/target/target_core_user.c | 44 ++++++++++++++++++++++++++++------- include/uapi/linux/target_core_user.h | 4 +++- 2 files changed, 39 insertions(+), 9 deletions(-) diff --git a/drivers/target/target_core_user.c b/drivers/target/target_core_user.c index 7f96dfa32b9c..d8dc3d22051f 100644 --- a/drivers/target/target_core_user.c +++ b/drivers/target/target_core_user.c @@ -656,7 +656,7 @@ static void scatter_data_area(struct tcmu_dev *udev, } static void gather_data_area(struct tcmu_dev *udev, struct tcmu_cmd *cmd, - bool bidi) + bool bidi, uint32_t read_len) { struct se_cmd *se_cmd = cmd->se_cmd; int i, dbi; @@ -689,7 +689,7 @@ static void gather_data_area(struct tcmu_dev *udev, struct tcmu_cmd *cmd, for_each_sg(data_sg, sg, data_nents, i) { int sg_remaining = sg->length; to = kmap_atomic(sg_page(sg)) + sg->offset; - while (sg_remaining > 0) { + while (sg_remaining > 0 && read_len > 0) { if (block_remaining == 0) { if (from) kunmap_atomic(from); @@ -701,6 +701,8 @@ static void gather_data_area(struct tcmu_dev *udev, struct tcmu_cmd *cmd, } copy_bytes = min_t(size_t, sg_remaining, block_remaining); + if (read_len < copy_bytes) + copy_bytes = read_len; offset = DATA_BLOCK_SIZE - block_remaining; tcmu_flush_dcache_range(from, copy_bytes); memcpy(to + sg->length - sg_remaining, from + offset, @@ -708,8 +710,11 @@ static void gather_data_area(struct tcmu_dev *udev, struct tcmu_cmd *cmd, sg_remaining -= copy_bytes; block_remaining -= copy_bytes; + read_len -= copy_bytes; } kunmap_atomic(to - sg->offset); + if (read_len == 0) + break; } if (from) kunmap_atomic(from); @@ -1042,6 +1047,8 @@ static void tcmu_handle_completion(struct tcmu_cmd *cmd, struct tcmu_cmd_entry * { struct se_cmd *se_cmd = cmd->se_cmd; struct tcmu_dev *udev = cmd->tcmu_dev; + bool read_len_valid = false; + uint32_t read_len = se_cmd->data_length; /* * cmd has been completed already from timeout, just reclaim @@ -1056,13 +1063,28 @@ static void tcmu_handle_completion(struct tcmu_cmd *cmd, struct tcmu_cmd_entry * pr_warn("TCMU: Userspace set UNKNOWN_OP flag on se_cmd %p\n", cmd->se_cmd); entry->rsp.scsi_status = SAM_STAT_CHECK_CONDITION; - } else if (entry->rsp.scsi_status == SAM_STAT_CHECK_CONDITION) { + goto done; + } + + if (se_cmd->data_direction == DMA_FROM_DEVICE && + (entry->hdr.uflags & TCMU_UFLAG_READ_LEN) && entry->rsp.read_len) { + read_len_valid = true; + if (entry->rsp.read_len < read_len) + read_len = entry->rsp.read_len; + } + + if (entry->rsp.scsi_status == SAM_STAT_CHECK_CONDITION) { transport_copy_sense_to_cmd(se_cmd, entry->rsp.sense_buffer); - } else if (se_cmd->se_cmd_flags & SCF_BIDI) { + if (!read_len_valid ) + goto done; + else + se_cmd->se_cmd_flags |= SCF_TREAT_READ_AS_NORMAL; + } + if (se_cmd->se_cmd_flags & SCF_BIDI) { /* Get Data-In buffer before clean up */ - gather_data_area(udev, cmd, true); + gather_data_area(udev, cmd, true, read_len); } else if (se_cmd->data_direction == DMA_FROM_DEVICE) { - gather_data_area(udev, cmd, false); + gather_data_area(udev, cmd, false, read_len); } else if (se_cmd->data_direction == DMA_TO_DEVICE) { /* TODO: */ } else if (se_cmd->data_direction != DMA_NONE) { @@ -1070,7 +1092,13 @@ static void tcmu_handle_completion(struct tcmu_cmd *cmd, struct tcmu_cmd_entry * se_cmd->data_direction); } - target_complete_cmd(cmd->se_cmd, entry->rsp.scsi_status); +done: + if (read_len_valid) { + pr_debug("read_len = %d\n", read_len); + target_complete_cmd_with_length(cmd->se_cmd, + entry->rsp.scsi_status, read_len); + } else + target_complete_cmd(cmd->se_cmd, entry->rsp.scsi_status); out: cmd->se_cmd = NULL; @@ -1740,7 +1768,7 @@ static int tcmu_configure_device(struct se_device *dev) /* Initialise the mailbox of the ring buffer */ mb = udev->mb_addr; mb->version = TCMU_MAILBOX_VERSION; - mb->flags = TCMU_MAILBOX_FLAG_CAP_OOOC; + mb->flags = TCMU_MAILBOX_FLAG_CAP_OOOC | TCMU_MAILBOX_FLAG_CAP_READ_LEN; mb->cmdr_off = CMDR_OFF; mb->cmdr_size = udev->cmdr_size; diff --git a/include/uapi/linux/target_core_user.h b/include/uapi/linux/target_core_user.h index 6e299349b158..b7b57967d90f 100644 --- a/include/uapi/linux/target_core_user.h +++ b/include/uapi/linux/target_core_user.h @@ -44,6 +44,7 @@ #define TCMU_MAILBOX_VERSION 2 #define ALIGN_SIZE 64 /* Should be enough for most CPUs */ #define TCMU_MAILBOX_FLAG_CAP_OOOC (1 << 0) /* Out-of-order completions */ +#define TCMU_MAILBOX_FLAG_CAP_READ_LEN (1 << 1) /* Read data length */ struct tcmu_mailbox { __u16 version; @@ -71,6 +72,7 @@ struct tcmu_cmd_entry_hdr { __u16 cmd_id; __u8 kflags; #define TCMU_UFLAG_UNKNOWN_OP 0x1 +#define TCMU_UFLAG_READ_LEN 0x2 __u8 uflags; } __packed; @@ -119,7 +121,7 @@ struct tcmu_cmd_entry { __u8 scsi_status; __u8 __pad1; __u16 __pad2; - __u32 __pad3; + __u32 read_len; char sense_buffer[TCMU_SENSE_BUFFERSIZE]; } rsp; }; -- cgit v1.2.3 From f2233a33dc1fef4aa30dc11e4c676637bf358c3d Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 19 Mar 2018 22:50:05 -0400 Subject: scsi: ipr: Eliminate duplicate barriers Driver does both wmb() and writel(). The latter already has a barrier on some architectures like arm64. This ends up with CPU observing two barriers back to back before executing the register write. Drivers should generally assume that the barrier implied by writel() is sufficient for ordering DMA. Remove the extraneous wmb() before it. [mkp: Squashed Arnd's and Sinan's patches] Signed-off-by: Arnd Bergmann Reported-by: Sinan Kaya Acked-by: Brian King Signed-off-by: Martin K. Petersen --- drivers/scsi/ipr.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c index 0a9b8b387bd2..02d65dce74e5 100644 --- a/drivers/scsi/ipr.c +++ b/drivers/scsi/ipr.c @@ -760,7 +760,6 @@ static void ipr_mask_and_clear_interrupts(struct ipr_ioa_cfg *ioa_cfg, ioa_cfg->hrrq[i].allow_interrupts = 0; spin_unlock(&ioa_cfg->hrrq[i]._lock); } - wmb(); /* Set interrupt mask to stop all new interrupts */ if (ioa_cfg->sis64) @@ -8403,7 +8402,6 @@ static int ipr_reset_enable_ioa(struct ipr_cmnd *ipr_cmd) ioa_cfg->hrrq[i].allow_interrupts = 1; spin_unlock(&ioa_cfg->hrrq[i]._lock); } - wmb(); if (ioa_cfg->sis64) { /* Set the adapter to the correct endian mode. */ writel(IPR_ENDIAN_SWAP_KEY, ioa_cfg->regs.endian_swap_reg); -- cgit v1.2.3 From 49d7bd36813ea8e6b4c97b640d24e7fbd44c84f0 Mon Sep 17 00:00:00 2001 From: Mikhail Malygin Date: Wed, 13 Jun 2018 13:05:57 +0000 Subject: scsi: qla2xxx: Spinlock recursion in qla_target The patch reverts changes done in qlt_schedule_sess_for_deletion() to avoid spinlock recursion sess->vha->work_lock should be used instead of ha->tgt.sess_lock, that can be locked in callers: qlt_reset() or qlt_handle_login() [mkp: roll in build warning reported by sfr] Fixes: 1c6cacf4ea6c04 ("scsi: qla2xxx: Fixup locking for session deletion") Cc: #v4.17 Signed-off-by: Mikhail Malygin Reported-by: Mikhail Malygin Tested-by: Mikhail Malygin Acked-by: Himanshu Madhani Signed-off-by: Martin K. Petersen --- drivers/scsi/qla2xxx/qla_target.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_target.c b/drivers/scsi/qla2xxx/qla_target.c index 0fea2e2326be..1027b0cb7fa3 100644 --- a/drivers/scsi/qla2xxx/qla_target.c +++ b/drivers/scsi/qla2xxx/qla_target.c @@ -1224,7 +1224,6 @@ static void qla24xx_chk_fcp_state(struct fc_port *sess) void qlt_schedule_sess_for_deletion(struct fc_port *sess) { struct qla_tgt *tgt = sess->tgt; - struct qla_hw_data *ha = sess->vha->hw; unsigned long flags; if (sess->disc_state == DSC_DELETE_PEND) @@ -1241,16 +1240,16 @@ void qlt_schedule_sess_for_deletion(struct fc_port *sess) return; } - spin_lock_irqsave(&ha->tgt.sess_lock, flags); if (sess->deleted == QLA_SESS_DELETED) sess->logout_on_delete = 0; + spin_lock_irqsave(&sess->vha->work_lock, flags); if (sess->deleted == QLA_SESS_DELETION_IN_PROGRESS) { - spin_unlock_irqrestore(&ha->tgt.sess_lock, flags); + spin_unlock_irqrestore(&sess->vha->work_lock, flags); return; } sess->deleted = QLA_SESS_DELETION_IN_PROGRESS; - spin_unlock_irqrestore(&ha->tgt.sess_lock, flags); + spin_unlock_irqrestore(&sess->vha->work_lock, flags); sess->disc_state = DSC_DELETE_PEND; -- cgit v1.2.3 From 52ab9768f723823a71dc659f0fad803a90f80236 Mon Sep 17 00:00:00 2001 From: Luis Henriques Date: Mon, 18 Jun 2018 17:08:03 +0100 Subject: scsi: scsi_debug: Fix memory leak on module unload Since commit 80c49563e250 ("scsi: scsi_debug: implement IMMED bit") there are long delays in F_SYNC_DELAY and F_SSU_DELAY. This can cause a memory leak in schedule_resp(), which can be invoked while unloading the scsi_debug module: free_all_queued() had already freed all sd_dp and schedule_resp will alloc a new one, which will never get freed. Here's the kmemleak report while running xfstests generic/350: unreferenced object 0xffff88007d752b00 (size 128): comm "rmmod", pid 26940, jiffies 4295816945 (age 7.588s) hex dump (first 32 bytes): 00 2b 75 7d 00 88 ff ff 00 00 00 00 00 00 00 00 .+u}............ 00 00 00 00 00 00 00 00 8e 31 a2 34 5f 03 00 00 .........1.4_... backtrace: [<000000002abd83d0>] 0xffffffffa000705e [<000000004c063fda>] scsi_dispatch_cmd+0xc7/0x1a0 [<000000000c119a00>] scsi_request_fn+0x251/0x550 [<000000009de0c736>] __blk_run_queue+0x3f/0x60 [<000000001c4453c8>] blk_execute_rq_nowait+0x98/0xd0 [<00000000d17ec79f>] blk_execute_rq+0x3a/0x50 [<00000000a7654b6e>] scsi_execute+0x113/0x250 [<00000000fd78f7cd>] sd_sync_cache+0x95/0x160 [<0000000024dacb14>] sd_shutdown+0x9b/0xd0 [<00000000e9101710>] sd_remove+0x5f/0xb0 [<00000000c43f0d63>] device_release_driver_internal+0x13c/0x1f0 [<00000000e8ad57b6>] bus_remove_device+0xe9/0x160 [<00000000713a7b8a>] device_del+0x120/0x320 [<00000000e5db670c>] __scsi_remove_device+0x115/0x150 [<00000000eccbef30>] scsi_forget_host+0x20/0x60 [<00000000cd5a0738>] scsi_remove_host+0x6d/0x120 Cc: stable@vger.kernel.org # v4.17+ Signed-off-by: Luis Henriques Acked-by: Douglas Gilbert Signed-off-by: Martin K. Petersen --- drivers/scsi/scsi_debug.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c index 24d7496cd9e2..364e71861bfd 100644 --- a/drivers/scsi/scsi_debug.c +++ b/drivers/scsi/scsi_debug.c @@ -5507,9 +5507,9 @@ static void __exit scsi_debug_exit(void) int k = sdebug_add_host; stop_all_queued(); - free_all_queued(); for (; k; k--) sdebug_remove_adapter(); + free_all_queued(); driver_unregister(&sdebug_driverfs_driver); bus_unregister(&pseudo_lld_bus); root_device_unregister(pseudo_primary); -- cgit v1.2.3 From 1bcfe0564044be578841744faea1c2f46adc8178 Mon Sep 17 00:00:00 2001 From: Oleksij Rempel Date: Fri, 15 Jun 2018 09:41:29 +0200 Subject: ARM: dts: imx6sx: fix irq for pcie bridge Use the correct IRQ line for the MSI controller in the PCIe host controller. Apparently a different IRQ line is used compared to other i.MX6 variants. Without this change MSI IRQs aren't properly propagated to the upstream interrupt controller. Signed-off-by: Oleksij Rempel Reviewed-by: Lucas Stach Fixes: b1d17f68e5c5 ("ARM: dts: imx: add initial imx6sx device tree source") Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6sx.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index d8b94f47498b..4e4a55aad5c9 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -1344,7 +1344,7 @@ ranges = <0x81000000 0 0 0x08f80000 0 0x00010000 /* downstream I/O */ 0x82000000 0 0x08000000 0x08000000 0 0x00f00000>; /* non-prefetchable memory */ num-lanes = <1>; - interrupts = ; + interrupts = ; interrupt-names = "msi"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; -- cgit v1.2.3 From 12baf7721143c83150fa973484b7b5fcd86b23f0 Mon Sep 17 00:00:00 2001 From: Chris Packham Date: Tue, 19 Jun 2018 17:31:24 +1200 Subject: mtd: rawnand: micron: add ONFI_FEATURE_ON_DIE_ECC to supported features Add ONFI_FEATURE_ON_DIE_ECC to the set/get features list for Micron NAND flash. Fixes: 789157e41a06 ("mtd: rawnand: allow vendors to declare (un)supported features") Cc: Signed-off-by: Chris Packham Reviewed-by: Miquel Raynal Signed-off-by: Boris Brezillon --- drivers/mtd/nand/raw/nand_micron.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/mtd/nand/raw/nand_micron.c b/drivers/mtd/nand/raw/nand_micron.c index 0af45b134c0c..5ec4c90a637d 100644 --- a/drivers/mtd/nand/raw/nand_micron.c +++ b/drivers/mtd/nand/raw/nand_micron.c @@ -66,7 +66,9 @@ static int micron_nand_onfi_init(struct nand_chip *chip) if (p->supports_set_get_features) { set_bit(ONFI_FEATURE_ADDR_READ_RETRY, p->set_feature_list); + set_bit(ONFI_FEATURE_ON_DIE_ECC, p->set_feature_list); set_bit(ONFI_FEATURE_ADDR_READ_RETRY, p->get_feature_list); + set_bit(ONFI_FEATURE_ON_DIE_ECC, p->get_feature_list); } return 0; -- cgit v1.2.3 From 93ef2dc0c4f7acf4253882a03c11f2ca8e41f387 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Wed, 6 Jun 2018 14:22:24 +0000 Subject: usb: dwc3: Fix error return code in dwc3_qcom_probe() Fix to return error code -ENODEV from the get device failed error handling case instead of 0, as done elsewhere in this function. Fixes: a4333c3a6ba9 ("usb: dwc3: Add Qualcomm DWC3 glue driver") Signed-off-by: Wei Yongjun Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/dwc3-qcom.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c index b0e67ab2f98c..8854e428ae08 100644 --- a/drivers/usb/dwc3/dwc3-qcom.c +++ b/drivers/usb/dwc3/dwc3-qcom.c @@ -490,6 +490,7 @@ static int dwc3_qcom_probe(struct platform_device *pdev) qcom->dwc3 = of_find_device_by_node(dwc3_np); if (!qcom->dwc3) { dev_err(&pdev->dev, "failed to get dwc3 platform device\n"); + ret = -ENODEV; goto depopulate; } -- cgit v1.2.3 From 9925e6ebe5c2da9601037cca73462782900b9190 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 25 May 2018 18:06:20 +0200 Subject: usb: dwc3: qcom: mark PM functions as __maybe_unused The #ifdef guards around these are wrong, resulting in warnings in certain configurations: drivers/usb/dwc3/dwc3-qcom.c:244:12: error: 'dwc3_qcom_resume' defined but not used [-Werror=unused-function] static int dwc3_qcom_resume(struct dwc3_qcom *qcom) ^~~~~~~~~~~~~~~~ drivers/usb/dwc3/dwc3-qcom.c:223:12: error: 'dwc3_qcom_suspend' defined but not used [-Werror=unused-function] static int dwc3_qcom_suspend(struct dwc3_qcom *qcom) This replaces the guards with __maybe_unused annotations to shut up the warnings and give better compile time coverage. Fixes: a4333c3a6ba9 ("usb: dwc3: Add Qualcomm DWC3 glue driver") Reviewed-by: Douglas Anderson Acked-by: Geert Uytterhoeven Signed-off-by: Arnd Bergmann Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/dwc3-qcom.c | 12 ++++-------- 1 file changed, 4 insertions(+), 8 deletions(-) diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c index 8854e428ae08..a6d0203e40b6 100644 --- a/drivers/usb/dwc3/dwc3-qcom.c +++ b/drivers/usb/dwc3/dwc3-qcom.c @@ -548,8 +548,7 @@ static int dwc3_qcom_remove(struct platform_device *pdev) return 0; } -#ifdef CONFIG_PM_SLEEP -static int dwc3_qcom_pm_suspend(struct device *dev) +static int __maybe_unused dwc3_qcom_pm_suspend(struct device *dev) { struct dwc3_qcom *qcom = dev_get_drvdata(dev); int ret = 0; @@ -561,7 +560,7 @@ static int dwc3_qcom_pm_suspend(struct device *dev) return ret; } -static int dwc3_qcom_pm_resume(struct device *dev) +static int __maybe_unused dwc3_qcom_pm_resume(struct device *dev) { struct dwc3_qcom *qcom = dev_get_drvdata(dev); int ret; @@ -572,23 +571,20 @@ static int dwc3_qcom_pm_resume(struct device *dev) return ret; } -#endif -#ifdef CONFIG_PM -static int dwc3_qcom_runtime_suspend(struct device *dev) +static int __maybe_unused dwc3_qcom_runtime_suspend(struct device *dev) { struct dwc3_qcom *qcom = dev_get_drvdata(dev); return dwc3_qcom_suspend(qcom); } -static int dwc3_qcom_runtime_resume(struct device *dev) +static int __maybe_unused dwc3_qcom_runtime_resume(struct device *dev) { struct dwc3_qcom *qcom = dev_get_drvdata(dev); return dwc3_qcom_resume(qcom); } -#endif static const struct dev_pm_ops dwc3_qcom_dev_pm_ops = { SET_SYSTEM_SLEEP_PM_OPS(dwc3_qcom_pm_suspend, dwc3_qcom_pm_resume) -- cgit v1.2.3 From 22bb5cfdf13ae70c6a34508a16cfeee48f162443 Mon Sep 17 00:00:00 2001 From: Artur Petrosyan Date: Wed, 23 May 2018 09:26:08 -0400 Subject: usb: dwc2: Fix host exit from hibernation flow. In case when a hub is connected to DWC2 host auto suspend occurs and host goes to hibernation. When any device connected to hub host hibernation exiting incorrectly. - Added dwc2_hcd_rem_wakeup() function call to exit from suspend state by remote wakeup. - Increase timeout value for port suspend bit to be set. Acked-by: Minas Harutyunyan Signed-off-by: Artur Petrosyan Signed-off-by: Felipe Balbi --- drivers/usb/dwc2/hcd.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c index edaf0b6af4f0..bae08a7d7abd 100644 --- a/drivers/usb/dwc2/hcd.c +++ b/drivers/usb/dwc2/hcd.c @@ -5435,7 +5435,7 @@ int dwc2_host_enter_hibernation(struct dwc2_hsotg *hsotg) dwc2_writel(hprt0, hsotg->regs + HPRT0); /* Wait for the HPRT0.PrtSusp register field to be set */ - if (dwc2_hsotg_wait_bit_set(hsotg, HPRT0, HPRT0_SUSP, 300)) + if (dwc2_hsotg_wait_bit_set(hsotg, HPRT0, HPRT0_SUSP, 3000)) dev_warn(hsotg->dev, "Suspend wasn't generated\n"); /* @@ -5616,6 +5616,8 @@ int dwc2_host_exit_hibernation(struct dwc2_hsotg *hsotg, int rem_wakeup, return ret; } + dwc2_hcd_rem_wakeup(hsotg); + hsotg->hibernated = 0; hsotg->bus_suspended = 0; hsotg->lx_state = DWC2_L0; -- cgit v1.2.3 From 8760675932ddb614e83702117d36ea644050c609 Mon Sep 17 00:00:00 2001 From: William Wu Date: Mon, 21 May 2018 18:12:00 +0800 Subject: usb: dwc2: fix the incorrect bitmaps for the ports of multi_tt hub The dwc2_get_ls_map() use ttport to reference into the bitmap if we're on a multi_tt hub. But the bitmaps index from 0 to (hub->maxchild - 1), while the ttport index from 1 to hub->maxchild. This will cause invalid memory access when the number of ttport is hub->maxchild. Without this patch, I can easily meet a Kernel panic issue if connect a low-speed USB mouse with the max port of FE2.1 multi-tt hub (1a40:0201) on rk3288 platform. Fixes: 9f9f09b048f5 ("usb: dwc2: host: Totally redo the microframe scheduler") Cc: Reviewed-by: Douglas Anderson Acked-by: Minas Harutyunyan hminas@synopsys.com> Signed-off-by: William Wu Signed-off-by: Felipe Balbi --- drivers/usb/dwc2/hcd_queue.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/dwc2/hcd_queue.c b/drivers/usb/dwc2/hcd_queue.c index d7c3d6c776d8..9c55d1addba9 100644 --- a/drivers/usb/dwc2/hcd_queue.c +++ b/drivers/usb/dwc2/hcd_queue.c @@ -383,7 +383,7 @@ static unsigned long *dwc2_get_ls_map(struct dwc2_hsotg *hsotg, /* Get the map and adjust if this is a multi_tt hub */ map = qh->dwc_tt->periodic_bitmaps; if (qh->dwc_tt->usb_tt->multi) - map += DWC2_ELEMENTS_PER_LS_BITMAP * qh->ttport; + map += DWC2_ELEMENTS_PER_LS_BITMAP * (qh->ttport - 1); return map; } -- cgit v1.2.3 From af424a410749ed7e0c2bffd3cedbc7c274d0ff6f Mon Sep 17 00:00:00 2001 From: William Wu Date: Fri, 11 May 2018 17:46:31 +0800 Subject: usb: dwc2: alloc dma aligned buffer for isoc split in The commit 3bc04e28a030 ("usb: dwc2: host: Get aligned DMA in a more supported way") rips out a lot of code to simply the allocation of aligned DMA. However, it also introduces a new issue when use isoc split in transfer. In my test case, I connect the dwc2 controller with an usb hs Hub (GL852G-12), and plug an usb fs audio device (Plantronics headset) into the downstream port of Hub. Then use the usb mic to record, we can find noise when playback. It's because that the usb Hub uses an MDATA for the first transaction and a DATA0 for the second transaction for the isoc split in transaction. An typical isoc split in transaction sequence like this: - SSPLIT IN transaction - CSPLIT IN transaction - MDATA packet - CSPLIT IN transaction - DATA0 packet The DMA address of MDATA (urb->dma) is always DWORD-aligned, but the DMA address of DATA0 (urb->dma + qtd->isoc_split_offset) may not be DWORD-aligned, it depends on the qtd->isoc_split_offset (the length of MDATA). In my test case, the length of MDATA is usually unaligned, this cause DATA0 packet transmission error. This patch use kmem_cache to allocate aligned DMA buf for isoc split in transaction. Note that according to usb 2.0 spec, the maximum data payload size is 1023 bytes for each fs isoc ep, and the maximum allowable interrupt data payload size is 64 bytes or less for fs interrupt ep. So we set the size of object to be 1024 bytes in the kmem cache. Tested-by: Gevorg Sahakyan Tested-by: Heiko Stuebner Acked-by: Minas Harutyunyan hminas@synopsys.com> Signed-off-by: William Wu Reviewed-by: Douglas Anderson Signed-off-by: Felipe Balbi --- drivers/usb/dwc2/core.h | 3 ++ drivers/usb/dwc2/hcd.c | 89 +++++++++++++++++++++++++++++++++++++++++--- drivers/usb/dwc2/hcd.h | 8 ++++ drivers/usb/dwc2/hcd_intr.c | 8 ++++ drivers/usb/dwc2/hcd_queue.c | 3 ++ 5 files changed, 106 insertions(+), 5 deletions(-) diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h index 4a56ac772a3c..71b3b08ad516 100644 --- a/drivers/usb/dwc2/core.h +++ b/drivers/usb/dwc2/core.h @@ -1004,6 +1004,7 @@ struct dwc2_hregs_backup { * @frame_list_sz: Frame list size * @desc_gen_cache: Kmem cache for generic descriptors * @desc_hsisoc_cache: Kmem cache for hs isochronous descriptors + * @unaligned_cache: Kmem cache for DMA mode to handle non-aligned buf * * These are for peripheral mode: * @@ -1177,6 +1178,8 @@ struct dwc2_hsotg { u32 frame_list_sz; struct kmem_cache *desc_gen_cache; struct kmem_cache *desc_hsisoc_cache; + struct kmem_cache *unaligned_cache; +#define DWC2_KMEM_UNALIGNED_BUF_SIZE 1024 #endif /* CONFIG_USB_DWC2_HOST || CONFIG_USB_DWC2_DUAL_ROLE */ diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c index bae08a7d7abd..b1104be3429c 100644 --- a/drivers/usb/dwc2/hcd.c +++ b/drivers/usb/dwc2/hcd.c @@ -1567,11 +1567,20 @@ static void dwc2_hc_start_transfer(struct dwc2_hsotg *hsotg, } if (hsotg->params.host_dma) { - dwc2_writel((u32)chan->xfer_dma, - hsotg->regs + HCDMA(chan->hc_num)); + dma_addr_t dma_addr; + + if (chan->align_buf) { + if (dbg_hc(chan)) + dev_vdbg(hsotg->dev, "align_buf\n"); + dma_addr = chan->align_buf; + } else { + dma_addr = chan->xfer_dma; + } + dwc2_writel((u32)dma_addr, hsotg->regs + HCDMA(chan->hc_num)); + if (dbg_hc(chan)) dev_vdbg(hsotg->dev, "Wrote %08lx to HCDMA(%d)\n", - (unsigned long)chan->xfer_dma, chan->hc_num); + (unsigned long)dma_addr, chan->hc_num); } /* Start the split */ @@ -2625,6 +2634,35 @@ static void dwc2_hc_init_xfer(struct dwc2_hsotg *hsotg, } } +static int dwc2_alloc_split_dma_aligned_buf(struct dwc2_hsotg *hsotg, + struct dwc2_qh *qh, + struct dwc2_host_chan *chan) +{ + if (!hsotg->unaligned_cache || + chan->max_packet > DWC2_KMEM_UNALIGNED_BUF_SIZE) + return -ENOMEM; + + if (!qh->dw_align_buf) { + qh->dw_align_buf = kmem_cache_alloc(hsotg->unaligned_cache, + GFP_ATOMIC | GFP_DMA); + if (!qh->dw_align_buf) + return -ENOMEM; + } + + qh->dw_align_buf_dma = dma_map_single(hsotg->dev, qh->dw_align_buf, + DWC2_KMEM_UNALIGNED_BUF_SIZE, + DMA_FROM_DEVICE); + + if (dma_mapping_error(hsotg->dev, qh->dw_align_buf_dma)) { + dev_err(hsotg->dev, "can't map align_buf\n"); + chan->align_buf = 0; + return -EINVAL; + } + + chan->align_buf = qh->dw_align_buf_dma; + return 0; +} + #define DWC2_USB_DMA_ALIGN 4 struct dma_aligned_buffer { @@ -2802,6 +2840,32 @@ static int dwc2_assign_and_init_hc(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh) /* Set the transfer attributes */ dwc2_hc_init_xfer(hsotg, chan, qtd); + /* For non-dword aligned buffers */ + if (hsotg->params.host_dma && qh->do_split && + chan->ep_is_in && (chan->xfer_dma & 0x3)) { + dev_vdbg(hsotg->dev, "Non-aligned buffer\n"); + if (dwc2_alloc_split_dma_aligned_buf(hsotg, qh, chan)) { + dev_err(hsotg->dev, + "Failed to allocate memory to handle non-aligned buffer\n"); + /* Add channel back to free list */ + chan->align_buf = 0; + chan->multi_count = 0; + list_add_tail(&chan->hc_list_entry, + &hsotg->free_hc_list); + qtd->in_process = 0; + qh->channel = NULL; + return -ENOMEM; + } + } else { + /* + * We assume that DMA is always aligned in non-split + * case or split out case. Warn if not. + */ + WARN_ON_ONCE(hsotg->params.host_dma && + (chan->xfer_dma & 0x3)); + chan->align_buf = 0; + } + if (chan->ep_type == USB_ENDPOINT_XFER_INT || chan->ep_type == USB_ENDPOINT_XFER_ISOC) /* @@ -5246,6 +5310,19 @@ int dwc2_hcd_init(struct dwc2_hsotg *hsotg) } } + if (hsotg->params.host_dma) { + /* + * Create kmem caches to handle non-aligned buffer + * in Buffer DMA mode. + */ + hsotg->unaligned_cache = kmem_cache_create("dwc2-unaligned-dma", + DWC2_KMEM_UNALIGNED_BUF_SIZE, 4, + SLAB_CACHE_DMA, NULL); + if (!hsotg->unaligned_cache) + dev_err(hsotg->dev, + "unable to create dwc2 unaligned cache\n"); + } + hsotg->otg_port = 1; hsotg->frame_list = NULL; hsotg->frame_list_dma = 0; @@ -5280,8 +5357,9 @@ int dwc2_hcd_init(struct dwc2_hsotg *hsotg) return 0; error4: - kmem_cache_destroy(hsotg->desc_gen_cache); + kmem_cache_destroy(hsotg->unaligned_cache); kmem_cache_destroy(hsotg->desc_hsisoc_cache); + kmem_cache_destroy(hsotg->desc_gen_cache); error3: dwc2_hcd_release(hsotg); error2: @@ -5322,8 +5400,9 @@ void dwc2_hcd_remove(struct dwc2_hsotg *hsotg) usb_remove_hcd(hcd); hsotg->priv = NULL; - kmem_cache_destroy(hsotg->desc_gen_cache); + kmem_cache_destroy(hsotg->unaligned_cache); kmem_cache_destroy(hsotg->desc_hsisoc_cache); + kmem_cache_destroy(hsotg->desc_gen_cache); dwc2_hcd_release(hsotg); usb_put_hcd(hcd); diff --git a/drivers/usb/dwc2/hcd.h b/drivers/usb/dwc2/hcd.h index 7db1ee7e7a77..5502a501f516 100644 --- a/drivers/usb/dwc2/hcd.h +++ b/drivers/usb/dwc2/hcd.h @@ -76,6 +76,8 @@ struct dwc2_qh; * (micro)frame * @xfer_buf: Pointer to current transfer buffer position * @xfer_dma: DMA address of xfer_buf + * @align_buf: In Buffer DMA mode this will be used if xfer_buf is not + * DWORD aligned * @xfer_len: Total number of bytes to transfer * @xfer_count: Number of bytes transferred so far * @start_pkt_count: Packet count at start of transfer @@ -133,6 +135,7 @@ struct dwc2_host_chan { u8 *xfer_buf; dma_addr_t xfer_dma; + dma_addr_t align_buf; u32 xfer_len; u32 xfer_count; u16 start_pkt_count; @@ -302,6 +305,9 @@ struct dwc2_hs_transfer_time { * speed. Note that this is in "schedule slice" which * is tightly packed. * @ntd: Actual number of transfer descriptors in a list + * @dw_align_buf: Used instead of original buffer if its physical address + * is not dword-aligned + * @dw_align_buf_dma: DMA address for dw_align_buf * @qtd_list: List of QTDs for this QH * @channel: Host channel currently processing transfers for this QH * @qh_list_entry: Entry for QH in either the periodic or non-periodic @@ -350,6 +356,8 @@ struct dwc2_qh { struct dwc2_hs_transfer_time hs_transfers[DWC2_HS_SCHEDULE_UFRAMES]; u32 ls_start_schedule_slice; u16 ntd; + u8 *dw_align_buf; + dma_addr_t dw_align_buf_dma; struct list_head qtd_list; struct dwc2_host_chan *channel; struct list_head qh_list_entry; diff --git a/drivers/usb/dwc2/hcd_intr.c b/drivers/usb/dwc2/hcd_intr.c index fbea5e3fb947..f3429ac4a6bb 100644 --- a/drivers/usb/dwc2/hcd_intr.c +++ b/drivers/usb/dwc2/hcd_intr.c @@ -950,6 +950,14 @@ static int dwc2_xfercomp_isoc_split_in(struct dwc2_hsotg *hsotg, frame_desc->actual_length += len; + if (chan->align_buf) { + dev_vdbg(hsotg->dev, "non-aligned buffer\n"); + dma_unmap_single(hsotg->dev, chan->qh->dw_align_buf_dma, + DWC2_KMEM_UNALIGNED_BUF_SIZE, DMA_FROM_DEVICE); + memcpy(qtd->urb->buf + (chan->xfer_dma - qtd->urb->dma), + chan->qh->dw_align_buf, len); + } + qtd->isoc_split_offset += len; hctsiz = dwc2_readl(hsotg->regs + HCTSIZ(chnum)); diff --git a/drivers/usb/dwc2/hcd_queue.c b/drivers/usb/dwc2/hcd_queue.c index 9c55d1addba9..301ced1618f8 100644 --- a/drivers/usb/dwc2/hcd_queue.c +++ b/drivers/usb/dwc2/hcd_queue.c @@ -1696,6 +1696,9 @@ void dwc2_hcd_qh_free(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh) if (qh->desc_list) dwc2_hcd_qh_free_ddma(hsotg, qh); + else if (hsotg->unaligned_cache && qh->dw_align_buf) + kmem_cache_free(hsotg->unaligned_cache, qh->dw_align_buf); + kfree(qh); } -- cgit v1.2.3 From 70c3c8cb83856758025c2a211dd022bc0478922a Mon Sep 17 00:00:00 2001 From: William Wu Date: Fri, 11 May 2018 17:46:32 +0800 Subject: usb: dwc2: fix isoc split in transfer with no data If isoc split in transfer with no data (the length of DATA0 packet is zero), we can't simply return immediately. Because the DATA0 can be the first transaction or the second transaction for the isoc split in transaction. If the DATA0 packet with no data is in the first transaction, we can return immediately. But if the DATA0 packet with no data is in the second transaction of isoc split in transaction sequence, we need to increase the qtd->isoc_frame_index and giveback urb to device driver if needed, otherwise, the MDATA packet will be lost. A typical test case is that connect the dwc2 controller with an usb hs Hub (GL852G-12), and plug an usb fs audio device (Plantronics headset) into the downstream port of Hub. Then use the usb mic to record, we can find noise when playback. In the case, the isoc split in transaction sequence like this: - SSPLIT IN transaction - CSPLIT IN transaction - MDATA packet (176 bytes) - CSPLIT IN transaction - DATA0 packet (0 byte) This patch use both the length of DATA0 and qtd->isoc_split_offset to check if the DATA0 is in the second transaction. Tested-by: Gevorg Sahakyan Tested-by: Heiko Stuebner Acked-by: Minas Harutyunyan hminas@synopsys.com> Signed-off-by: William Wu Signed-off-by: Felipe Balbi --- drivers/usb/dwc2/hcd_intr.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/usb/dwc2/hcd_intr.c b/drivers/usb/dwc2/hcd_intr.c index f3429ac4a6bb..ed7f05cf4906 100644 --- a/drivers/usb/dwc2/hcd_intr.c +++ b/drivers/usb/dwc2/hcd_intr.c @@ -942,9 +942,8 @@ static int dwc2_xfercomp_isoc_split_in(struct dwc2_hsotg *hsotg, frame_desc = &qtd->urb->iso_descs[qtd->isoc_frame_index]; len = dwc2_get_actual_xfer_length(hsotg, chan, chnum, qtd, DWC2_HC_XFER_COMPLETE, NULL); - if (!len) { + if (!len && !qtd->isoc_split_offset) { qtd->complete_split = 0; - qtd->isoc_split_offset = 0; return 0; } -- cgit v1.2.3 From 980900d6318066b9f8314bfb87329a20fd0d1ca4 Mon Sep 17 00:00:00 2001 From: Chunfeng Yun Date: Fri, 25 May 2018 17:24:57 +0800 Subject: usb: gadget: composite: fix delayed_status race condition when set_interface It happens when enable debug log, if set_alt() returns USB_GADGET_DELAYED_STATUS and usb_composite_setup_continue() is called before increasing count of @delayed_status, so fix it by using spinlock of @cdev->lock. Signed-off-by: Chunfeng Yun Tested-by: Jay Hsu Signed-off-by: Felipe Balbi --- drivers/usb/gadget/composite.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c index f242c2bcea81..d2fa071c21b1 100644 --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -1719,6 +1719,8 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) */ if (w_value && !f->get_alt) break; + + spin_lock(&cdev->lock); value = f->set_alt(f, w_index, w_value); if (value == USB_GADGET_DELAYED_STATUS) { DBG(cdev, @@ -1728,6 +1730,7 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) DBG(cdev, "delayed_status count %d\n", cdev->delayed_status); } + spin_unlock(&cdev->lock); break; case USB_REQ_GET_INTERFACE: if (ctrl->bRequestType != (USB_DIR_IN|USB_RECIP_INTERFACE)) -- cgit v1.2.3 From 9bb073a053f0464ea74a4d4c331fdb7da58568d6 Mon Sep 17 00:00:00 2001 From: Grigor Tovmasyan Date: Thu, 24 May 2018 18:22:30 +0400 Subject: usb: gadget: dwc2: fix memory leak in gadget_init() Freed allocated request for ep0 to prevent memory leak in case when dwc2_driver_probe() failed. Cc: Stefan Wahren Cc: Marek Szyprowski Tested-by: Stefan Wahren Tested-by: Marek Szyprowski Acked-by: Minas Harutyunyan Signed-off-by: Grigor Tovmasyan Signed-off-by: Felipe Balbi --- drivers/usb/dwc2/gadget.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c index fa3b6f361074..76e4f2e7d947 100644 --- a/drivers/usb/dwc2/gadget.c +++ b/drivers/usb/dwc2/gadget.c @@ -4735,9 +4735,11 @@ int dwc2_gadget_init(struct dwc2_hsotg *hsotg) } ret = usb_add_gadget_udc(dev, &hsotg->gadget); - if (ret) + if (ret) { + dwc2_hsotg_ep_free_request(&hsotg->eps_out[0]->ep, + hsotg->ctrl_req); return ret; - + } dwc2_hsotg_dump(hsotg); return 0; @@ -4751,6 +4753,7 @@ int dwc2_gadget_init(struct dwc2_hsotg *hsotg) int dwc2_hsotg_remove(struct dwc2_hsotg *hsotg) { usb_del_gadget_udc(&hsotg->gadget); + dwc2_hsotg_ep_free_request(&hsotg->eps_out[0]->ep, hsotg->ctrl_req); return 0; } -- cgit v1.2.3 From 1d8e5c00275825fc42aaa5597dab1d0b5b26bb64 Mon Sep 17 00:00:00 2001 From: Minas Harutyunyan Date: Wed, 23 May 2018 16:24:44 +0400 Subject: dwc2: gadget: Fix ISOC IN DDMA PID bitfield value calculation PID bitfield in descriptor should be set based on particular request length, not based on EP's mc value. PID value can't be set to 0 even request length is 0. Signed-off-by: Minas Harutyunyan Signed-off-by: Felipe Balbi --- drivers/usb/dwc2/gadget.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c index 76e4f2e7d947..a0f82cca2d9a 100644 --- a/drivers/usb/dwc2/gadget.c +++ b/drivers/usb/dwc2/gadget.c @@ -812,6 +812,7 @@ static int dwc2_gadget_fill_isoc_desc(struct dwc2_hsotg_ep *hs_ep, u32 index; u32 maxsize = 0; u32 mask = 0; + u8 pid = 0; maxsize = dwc2_gadget_get_desc_params(hs_ep, &mask); @@ -840,7 +841,11 @@ static int dwc2_gadget_fill_isoc_desc(struct dwc2_hsotg_ep *hs_ep, ((len << DEV_DMA_NBYTES_SHIFT) & mask)); if (hs_ep->dir_in) { - desc->status |= ((hs_ep->mc << DEV_DMA_ISOC_PID_SHIFT) & + if (len) + pid = DIV_ROUND_UP(len, hs_ep->ep.maxpacket); + else + pid = 1; + desc->status |= ((pid << DEV_DMA_ISOC_PID_SHIFT) & DEV_DMA_ISOC_PID_MASK) | ((len % hs_ep->ep.maxpacket) ? DEV_DMA_SHORT : 0) | -- cgit v1.2.3 From 3f77f244d8ec28e3a0a81240ffac7d626390060c Mon Sep 17 00:00:00 2001 From: Martin Kaiser Date: Mon, 18 Jun 2018 22:41:03 +0200 Subject: mtd: rawnand: mxc: set spare area size register explicitly The v21 version of the NAND flash controller contains a Spare Area Size Register (SPAS) at offset 0x10. Its setting defaults to the maximum spare area size of 218 bytes. The size that is set in this register is used by the controller when it calculates the ECC bytes internally in hardware. Usually, this register is updated from settings in the IIM fuses when the system is booting from NAND flash. For other boot media, however, the SPAS register remains at the default setting, which may not work for the particular flash chip on the board. The same goes for flash chips whose configuration cannot be set in the IIM fuses (e.g. chips with 2k sector size and 128 bytes spare area size can't be configured in the IIM fuses on imx25 systems). Set the SPAS register explicitly during the preset operation. Derive the register value from mtd->oobsize that was detected during probe by decoding the flash chip's ID bytes. While at it, rename the define for the spare area register's offset to NFC_V21_RSLTSPARE_AREA. The register at offset 0x10 on v1 controllers is different from the register on v21 controllers. Fixes: d484018 ("mtd: mxc_nand: set NFC registers after reset") Cc: stable@vger.kernel.org Signed-off-by: Martin Kaiser Reviewed-by: Sascha Hauer Reviewed-by: Miquel Raynal Signed-off-by: Boris Brezillon --- drivers/mtd/nand/raw/mxc_nand.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/mtd/nand/raw/mxc_nand.c b/drivers/mtd/nand/raw/mxc_nand.c index 45786e707b7b..26cef218bb43 100644 --- a/drivers/mtd/nand/raw/mxc_nand.c +++ b/drivers/mtd/nand/raw/mxc_nand.c @@ -48,7 +48,7 @@ #define NFC_V1_V2_CONFIG (host->regs + 0x0a) #define NFC_V1_V2_ECC_STATUS_RESULT (host->regs + 0x0c) #define NFC_V1_V2_RSLTMAIN_AREA (host->regs + 0x0e) -#define NFC_V1_V2_RSLTSPARE_AREA (host->regs + 0x10) +#define NFC_V21_RSLTSPARE_AREA (host->regs + 0x10) #define NFC_V1_V2_WRPROT (host->regs + 0x12) #define NFC_V1_UNLOCKSTART_BLKADDR (host->regs + 0x14) #define NFC_V1_UNLOCKEND_BLKADDR (host->regs + 0x16) @@ -1274,6 +1274,9 @@ static void preset_v2(struct mtd_info *mtd) writew(config1, NFC_V1_V2_CONFIG1); /* preset operation */ + /* spare area size in 16-bit half-words */ + writew(mtd->oobsize / 2, NFC_V21_RSLTSPARE_AREA); + /* Unlock the internal RAM Buffer */ writew(0x2, NFC_V1_V2_CONFIG); -- cgit v1.2.3 From f04684b4d85d6371126f476d3268ebf6a0bd57cf Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 21 Jun 2018 11:07:21 +0300 Subject: ALSA: lx6464es: Missing error code in snd_lx6464es_create() We forgot to set the error code on this error path. Fixes: 4a23fc8cc068 ("ALSA: lx6464es: add error handling for pci_ioremap_bar") Signed-off-by: Dan Carpenter Signed-off-by: Takashi Iwai --- sound/pci/lx6464es/lx6464es.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/lx6464es/lx6464es.c b/sound/pci/lx6464es/lx6464es.c index 6c85f13ab23f..54f6252faca6 100644 --- a/sound/pci/lx6464es/lx6464es.c +++ b/sound/pci/lx6464es/lx6464es.c @@ -1018,6 +1018,7 @@ static int snd_lx6464es_create(struct snd_card *card, chip->port_dsp_bar = pci_ioremap_bar(pci, 2); if (!chip->port_dsp_bar) { dev_err(card->dev, "cannot remap PCI memory region\n"); + err = -ENOMEM; goto remap_pci_failed; } -- cgit v1.2.3 From 57cb54e53bddb59f5f542ddd4b0bfe005d31a8d5 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 21 Jun 2018 13:33:53 +0200 Subject: ALSA: hda - Force to link down at runtime suspend on ATI/AMD HDMI MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Henning Kühn reported that the discrete AMD GPU on his hybrid graphics laptop no longer runtime-suspends due to the recent commit 07f4f97d7b4b ("vga_switcheroo: Use device link for HDA controller"). The root cause is that the HDMI codec on AMD GPU doesn't support CLKSTOP and EPSS, which are currently mandatory for powering down the HD-audio link at runtime suspend. Because the HD-audio link is still up, HD-audio controller driver blocks the transition to D3. For addressing the regression, this patch adds a new flag to indicate the forced link-down, and sets it for AMD HDMI codecs appropriately in the codec driver. Fixes: 07f4f97d7b4b ("vga_switcheroo: Use device link for HDA controller") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106957 Reported-by: Lukas Wunner Reported-and-tested-by: Henning Kühn Cc: # v4.17+ Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_codec.c | 5 +++-- sound/pci/hda/hda_codec.h | 1 + sound/pci/hda/patch_hdmi.c | 5 +++++ 3 files changed, 9 insertions(+), 2 deletions(-) diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c index d91c87e41756..20a171ac4bb2 100644 --- a/sound/pci/hda/hda_codec.c +++ b/sound/pci/hda/hda_codec.c @@ -2899,8 +2899,9 @@ static int hda_codec_runtime_suspend(struct device *dev) list_for_each_entry(pcm, &codec->pcm_list_head, list) snd_pcm_suspend_all(pcm->pcm); state = hda_call_codec_suspend(codec); - if (codec_has_clkstop(codec) && codec_has_epss(codec) && - (state & AC_PWRST_CLK_STOP_OK)) + if (codec->link_down_at_suspend || + (codec_has_clkstop(codec) && codec_has_epss(codec) && + (state & AC_PWRST_CLK_STOP_OK))) snd_hdac_codec_link_down(&codec->core); snd_hdac_link_power(&codec->core, false); return 0; diff --git a/sound/pci/hda/hda_codec.h b/sound/pci/hda/hda_codec.h index 681c360f29f9..a8b1b31f161c 100644 --- a/sound/pci/hda/hda_codec.h +++ b/sound/pci/hda/hda_codec.h @@ -258,6 +258,7 @@ struct hda_codec { unsigned int power_save_node:1; /* advanced PM for each widget */ unsigned int auto_runtime_pm:1; /* enable automatic codec runtime pm */ unsigned int force_pin_prefix:1; /* Add location prefix */ + unsigned int link_down_at_suspend:1; /* link down at runtime suspend */ #ifdef CONFIG_PM unsigned long power_on_acct; unsigned long power_off_acct; diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c index 8840daf9c6a3..98e1c411c56a 100644 --- a/sound/pci/hda/patch_hdmi.c +++ b/sound/pci/hda/patch_hdmi.c @@ -3741,6 +3741,11 @@ static int patch_atihdmi(struct hda_codec *codec) spec->chmap.channels_max = max(spec->chmap.channels_max, 8u); + /* AMD GPUs have neither EPSS nor CLKSTOP bits, hence preventing + * the link-down as is. Tell the core to allow it. + */ + codec->link_down_at_suspend = 1; + return 0; } -- cgit v1.2.3 From 54b0a2011dfcd2e3fe2c28062694fbbe3eb377a3 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Thu, 14 Jun 2018 08:24:39 +0200 Subject: microblaze: Add new syscalls io_pgetevents and rseq Wire up new syscalls io_pgetevents and rseq. Signed-off-by: Michal Simek --- arch/microblaze/include/asm/unistd.h | 2 +- arch/microblaze/include/uapi/asm/unistd.h | 2 ++ arch/microblaze/kernel/syscall_table.S | 2 ++ 3 files changed, 5 insertions(+), 1 deletion(-) diff --git a/arch/microblaze/include/asm/unistd.h b/arch/microblaze/include/asm/unistd.h index 9774e1d9507b..a62d09420a47 100644 --- a/arch/microblaze/include/asm/unistd.h +++ b/arch/microblaze/include/asm/unistd.h @@ -38,6 +38,6 @@ #endif /* __ASSEMBLY__ */ -#define __NR_syscalls 399 +#define __NR_syscalls 401 #endif /* _ASM_MICROBLAZE_UNISTD_H */ diff --git a/arch/microblaze/include/uapi/asm/unistd.h b/arch/microblaze/include/uapi/asm/unistd.h index eb156f914793..7a9f16a76413 100644 --- a/arch/microblaze/include/uapi/asm/unistd.h +++ b/arch/microblaze/include/uapi/asm/unistd.h @@ -415,5 +415,7 @@ #define __NR_pkey_alloc 396 #define __NR_pkey_free 397 #define __NR_statx 398 +#define __NR_io_pgetevents 399 +#define __NR_rseq 400 #endif /* _UAPI_ASM_MICROBLAZE_UNISTD_H */ diff --git a/arch/microblaze/kernel/syscall_table.S b/arch/microblaze/kernel/syscall_table.S index 56bcf313121f..6ab650593792 100644 --- a/arch/microblaze/kernel/syscall_table.S +++ b/arch/microblaze/kernel/syscall_table.S @@ -400,3 +400,5 @@ ENTRY(sys_call_table) .long sys_pkey_alloc .long sys_pkey_free .long sys_statx + .long sys_io_pgetevents + .long sys_rseq -- cgit v1.2.3 From 2dbeb7040a21846facbeea876e85cbde41fa81e9 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Tue, 19 Jun 2018 15:36:19 -0600 Subject: microblaze: remove unecessary of_platform_bus_probe call The call to of_platform_bus_probe has no effect because the DT core already probes default buses like "simple-bus" before this call. Michal Simek said 'xlnx,compound' hasn't been used in a long time, so that match entry isn't needed. Cc: Michal Simek Signed-off-by: Rob Herring Signed-off-by: Michal Simek --- arch/microblaze/kernel/platform.c | 7 ------- 1 file changed, 7 deletions(-) diff --git a/arch/microblaze/kernel/platform.c b/arch/microblaze/kernel/platform.c index 2540d60610d9..b9a414552d9b 100644 --- a/arch/microblaze/kernel/platform.c +++ b/arch/microblaze/kernel/platform.c @@ -14,15 +14,8 @@ #include #include -static struct of_device_id xilinx_of_bus_ids[] __initdata = { - { .compatible = "simple-bus", }, - { .compatible = "xlnx,compound", }, - {} -}; - static int __init microblaze_device_probe(void) { - of_platform_bus_probe(NULL, xilinx_of_bus_ids, NULL); of_platform_reset_gpio_probe(); return 0; } -- cgit v1.2.3 From 45df561a7ae2ca5080708cc2cf84a236f4d930ef Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Tue, 19 Jun 2018 15:36:20 -0600 Subject: microblaze: consolidate GPIO reset handling Now that platform.c only has the GPIO reset handling left, move the initcall to reset.c and remove platform.c. Cc: Michal Simek Signed-off-by: Rob Herring Signed-off-by: Michal Simek --- arch/microblaze/include/asm/setup.h | 2 -- arch/microblaze/kernel/Makefile | 2 +- arch/microblaze/kernel/platform.c | 22 ---------------------- arch/microblaze/kernel/reset.c | 11 ++++++----- 4 files changed, 7 insertions(+), 30 deletions(-) delete mode 100644 arch/microblaze/kernel/platform.c diff --git a/arch/microblaze/include/asm/setup.h b/arch/microblaze/include/asm/setup.h index a38e4a56e3c6..ce9b7b786156 100644 --- a/arch/microblaze/include/asm/setup.h +++ b/arch/microblaze/include/asm/setup.h @@ -23,8 +23,6 @@ extern char *klimit; extern void mmu_reset(void); # endif /* CONFIG_MMU */ -extern void of_platform_reset_gpio_probe(void); - void time_init(void); void init_IRQ(void); void machine_early_init(const char *cmdline, unsigned int ram, diff --git a/arch/microblaze/kernel/Makefile b/arch/microblaze/kernel/Makefile index 3a53378d66d9..dd71637437f4 100644 --- a/arch/microblaze/kernel/Makefile +++ b/arch/microblaze/kernel/Makefile @@ -16,7 +16,7 @@ extra-y := head.o vmlinux.lds obj-y += dma.o exceptions.o \ hw_exception_handler.o irq.o \ - platform.o process.o prom.o ptrace.o \ + process.o prom.o ptrace.o \ reset.o setup.o signal.o sys_microblaze.o timer.o traps.o unwind.o obj-y += cpu/ diff --git a/arch/microblaze/kernel/platform.c b/arch/microblaze/kernel/platform.c deleted file mode 100644 index b9a414552d9b..000000000000 --- a/arch/microblaze/kernel/platform.c +++ /dev/null @@ -1,22 +0,0 @@ -/* - * Copyright 2008 Michal Simek - * - * based on virtex.c file - * - * Copyright 2007 Secret Lab Technologies Ltd. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - -#include -#include -#include - -static int __init microblaze_device_probe(void) -{ - of_platform_reset_gpio_probe(); - return 0; -} -device_initcall(microblaze_device_probe); diff --git a/arch/microblaze/kernel/reset.c b/arch/microblaze/kernel/reset.c index bab4c8330ef4..fcbe1daf6316 100644 --- a/arch/microblaze/kernel/reset.c +++ b/arch/microblaze/kernel/reset.c @@ -18,7 +18,7 @@ static int handle; /* reset pin handle */ static unsigned int reset_val; -void of_platform_reset_gpio_probe(void) +static int of_platform_reset_gpio_probe(void) { int ret; handle = of_get_named_gpio(of_find_node_by_path("/"), @@ -27,13 +27,13 @@ void of_platform_reset_gpio_probe(void) if (!gpio_is_valid(handle)) { pr_info("Skipping unavailable RESET gpio %d (%s)\n", handle, "reset"); - return; + return -ENODEV; } ret = gpio_request(handle, "reset"); if (ret < 0) { pr_info("GPIO pin is already allocated\n"); - return; + return ret; } /* get current setup value */ @@ -51,11 +51,12 @@ void of_platform_reset_gpio_probe(void) pr_info("RESET: Registered gpio device: %d, current val: %d\n", handle, reset_val); - return; + return 0; err: gpio_free(handle); - return; + return ret; } +device_initcall(of_platform_reset_gpio_probe); static void gpio_system_reset(void) -- cgit v1.2.3 From f098631848cd9f4142b6dec7ea95baad846e1670 Mon Sep 17 00:00:00 2001 From: Filipe Manana Date: Wed, 20 Jun 2018 10:02:30 +0100 Subject: Btrfs: fix physical offset reported by fiemap for inline extents Commit 9d311e11fc1f ("Btrfs: fiemap: pass correct bytenr when fm_extent_count is zero") introduced a regression where we no longer report 0 as the physical offset for inline extents (and other extents with a special block_start value). This is because it always sets the variable used to report the physical offset ("disko") as em->block_start plus some offset, and em->block_start has the value 18446744073709551614 ((u64) -2) for inline extents. This made the btrfs test 004 (from fstests) often fail, for example, for a file with an inline extent we have the following items in the subvolume tree: item 101 key (418 INODE_ITEM 0) itemoff 11029 itemsize 160 generation 25 transid 38 size 1525 nbytes 1525 block group 0 mode 100666 links 1 uid 0 gid 0 rdev 0 sequence 0 flags 0x2(none) atime 1529342058.461891730 (2018-06-18 18:14:18) ctime 1529342058.461891730 (2018-06-18 18:14:18) mtime 1529342058.461891730 (2018-06-18 18:14:18) otime 1529342055.869892885 (2018-06-18 18:14:15) item 102 key (418 INODE_REF 264) itemoff 11016 itemsize 13 index 25 namelen 3 name: fc7 item 103 key (418 EXTENT_DATA 0) itemoff 9470 itemsize 1546 generation 38 type 0 (inline) inline extent data size 1525 ram_bytes 1525 compression 0 (none) Then when test 004 invoked fiemap against the file it got a non-zero physical offset: $ filefrag -v /mnt/p0/d4/d7/fc7 Filesystem type is: 9123683e File size of /mnt/p0/d4/d7/fc7 is 1525 (1 block of 4096 bytes) ext: logical_offset: physical_offset: length: expected: flags: 0: 0.. 4095: 18446744073709551614.. 4093: 4096: last,not_aligned,inline,eof /mnt/p0/d4/d7/fc7: 1 extent found This resulted in the test failing like this: btrfs/004 49s ... [failed, exit status 1]- output mismatch (see /home/fdmanana/git/hub/xfstests/results//btrfs/004.out.bad) --- tests/btrfs/004.out 2016-08-23 10:17:35.027012095 +0100 +++ /home/fdmanana/git/hub/xfstests/results//btrfs/004.out.bad 2018-06-18 18:15:02.385872155 +0100 @@ -1,3 +1,10 @@ QA output created by 004 *** test backref walking -*** done +./tests/btrfs/004: line 227: [: 7.55578637259143e+22: integer expression expected +ERROR: 7.55578637259143e+22 is not a valid numeric value. +unexpected output from + /home/fdmanana/git/hub/btrfs-progs/btrfs inspect-internal logical-resolve -s 65536 -P 7.55578637259143e+22 /home/fdmanana/btrfs-tests/scratch_1 ... (Run 'diff -u tests/btrfs/004.out /home/fdmanana/git/hub/xfstests/results//btrfs/004.out.bad' to see the entire diff) Ran: btrfs/004 The large number in scientific notation reported as an invalid numeric value is the result from the filter passed to perl which multiplies the physical offset by the block size reported by fiemap. So fix this by ensuring the physical offset is always set to 0 when we are processing an extent with a special block_start value. Fixes: 9d311e11fc1f ("Btrfs: fiemap: pass correct bytenr when fm_extent_count is zero") Signed-off-by: Filipe Manana Signed-off-by: David Sterba --- fs/btrfs/extent_io.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c index 8e4a7cdbc9f5..1aa91d57404a 100644 --- a/fs/btrfs/extent_io.c +++ b/fs/btrfs/extent_io.c @@ -4545,8 +4545,11 @@ int extent_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo, offset_in_extent = em_start - em->start; em_end = extent_map_end(em); em_len = em_end - em_start; - disko = em->block_start + offset_in_extent; flags = 0; + if (em->block_start < EXTENT_MAP_LAST_BYTE) + disko = em->block_start + offset_in_extent; + else + disko = 0; /* * bump off for our next call to get_extent -- cgit v1.2.3 From 22883ddc66df402f2fbc37fe1f4d2779238e4b2d Mon Sep 17 00:00:00 2001 From: Lu Fengqi Date: Tue, 19 Jun 2018 14:54:38 +0800 Subject: btrfs: fix invalid-free in btrfs_extent_same If this condition ((BTRFS_I(src)->flags & BTRFS_INODE_NODATASUM) != (BTRFS_I(dst)->flags & BTRFS_INODE_NODATASUM)) is hit, we will go to free the uninitialized cmp.src_pages and cmp.dst_pages. Fixes: 67b07bd4bec5 ("Btrfs: reuse cmp workspace in EXTENT_SAME ioctl") Signed-off-by: Lu Fengqi Reviewed-by: David Sterba Signed-off-by: David Sterba --- fs/btrfs/ioctl.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index 5556e9ea2a4b..a4d2856a4df1 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -3577,7 +3577,7 @@ static int btrfs_extent_same(struct inode *src, u64 loff, u64 olen, ret = btrfs_extent_same_range(src, loff, BTRFS_MAX_DEDUPE_LEN, dst, dst_loff, &cmp); if (ret) - goto out_unlock; + goto out_free; loff += BTRFS_MAX_DEDUPE_LEN; dst_loff += BTRFS_MAX_DEDUPE_LEN; @@ -3587,16 +3587,16 @@ static int btrfs_extent_same(struct inode *src, u64 loff, u64 olen, ret = btrfs_extent_same_range(src, loff, tail_len, dst, dst_loff, &cmp); +out_free: + kvfree(cmp.src_pages); + kvfree(cmp.dst_pages); + out_unlock: if (same_inode) inode_unlock(src); else btrfs_double_inode_unlock(src, dst); -out_free: - kvfree(cmp.src_pages); - kvfree(cmp.dst_pages); - return ret; } -- cgit v1.2.3 From 9c4a665ed83462039461dd34282e22160fb447ca Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Thu, 21 Jun 2018 19:34:57 +0100 Subject: ALSA: hda/ca0132: make array ca0132_alt_chmaps static The array ca0132_alt_chmaps is local to the source and does not need to be in global scope, so make it static. Cleans up sparse warning: warning: symbol 'ca0132_alt_chmaps' was not declared. Should it be static? Signed-off-by: Colin Ian King Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_ca0132.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/hda/patch_ca0132.c b/sound/pci/hda/patch_ca0132.c index d62c56feaf7d..4ff5320378e2 100644 --- a/sound/pci/hda/patch_ca0132.c +++ b/sound/pci/hda/patch_ca0132.c @@ -5665,7 +5665,7 @@ static const char * const ca0132_alt_slave_pfxs[] = { * I think this has to do with the pin for rear surround being 0x11, * and the center/lfe being 0x10. Usually the pin order is the opposite. */ -const struct snd_pcm_chmap_elem ca0132_alt_chmaps[] = { +static const struct snd_pcm_chmap_elem ca0132_alt_chmaps[] = { { .channels = 2, .map = { SNDRV_CHMAP_FL, SNDRV_CHMAP_FR } }, { .channels = 4, -- cgit v1.2.3 From 957f9a13df6c70aac31a1dade5e417c286d6d258 Mon Sep 17 00:00:00 2001 From: Jakub Kicinski Date: Wed, 20 Jun 2018 11:42:45 -0700 Subject: tools: bpftool: remove duplicated error message on prog load do_pin_fd() will already print out an error message if something goes wrong. Printing another error is unnecessary and will break JSON output, since error messages are full objects: $ bpftool -jp prog load tracex1_kern.o /sys/fs/bpf/a { "error": "can't pin the object (/sys/fs/bpf/a): File exists" },{ "error": "failed to pin program" } Fixes: 49a086c201a9 ("bpftool: implement prog load command") Signed-off-by: Jakub Kicinski Reviewed-by: Quentin Monnet Acked-by: Song Liu Signed-off-by: Daniel Borkmann --- tools/bpf/bpftool/prog.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/tools/bpf/bpftool/prog.c b/tools/bpf/bpftool/prog.c index 05f42a46d6ed..12b694fe0404 100644 --- a/tools/bpf/bpftool/prog.c +++ b/tools/bpf/bpftool/prog.c @@ -694,10 +694,8 @@ static int do_load(int argc, char **argv) return -1; } - if (do_pin_fd(prog_fd, argv[1])) { - p_err("failed to pin program"); + if (do_pin_fd(prog_fd, argv[1])) return -1; - } if (json_output) jsonw_null(json_wtr); -- cgit v1.2.3 From bfee71fb7376081349117fdc89f685a9e14a58c2 Mon Sep 17 00:00:00 2001 From: Jakub Kicinski Date: Wed, 20 Jun 2018 11:42:46 -0700 Subject: tools: bpftool: remember to close the libbpf object after prog load Remembering to close all descriptors and free memory may not seem important in a user space tool like bpftool, but if we were to run in batch mode the consumed resources start to add up quickly. Make sure program load closes the libbpf object (which unloads and frees it). Fixes: 49a086c201a9 ("bpftool: implement prog load command") Signed-off-by: Jakub Kicinski Reviewed-by: Quentin Monnet Acked-by: Song Liu Signed-off-by: Daniel Borkmann --- tools/bpf/bpftool/prog.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/tools/bpf/bpftool/prog.c b/tools/bpf/bpftool/prog.c index 12b694fe0404..959aa53ab678 100644 --- a/tools/bpf/bpftool/prog.c +++ b/tools/bpf/bpftool/prog.c @@ -695,12 +695,18 @@ static int do_load(int argc, char **argv) } if (do_pin_fd(prog_fd, argv[1])) - return -1; + goto err_close_obj; if (json_output) jsonw_null(json_wtr); + bpf_object__close(obj); + return 0; + +err_close_obj: + bpf_object__close(obj); + return -1; } static int do_help(int argc, char **argv) -- cgit v1.2.3 From e9893e6fa932f42c90c4ac5849fa9aa0f0f00a34 Mon Sep 17 00:00:00 2001 From: Abhishek Sahu Date: Wed, 13 Jun 2018 14:32:36 +0530 Subject: mtd: rawnand: fix return value check for bad block status Positive return value from read_oob() is making false BAD blocks. For some of the NAND controllers, OOB bytes will be protected with ECC and read_oob() will return number of bitflips. If there is any bitflip in ECC protected OOB bytes for BAD block status page, then that block is getting treated as BAD. Fixes: c120e75e0e7d ("mtd: nand: use read_oob() instead of cmdfunc() for bad block check") Cc: Signed-off-by: Abhishek Sahu Reviewed-by: Miquel Raynal Signed-off-by: Boris Brezillon --- drivers/mtd/nand/raw/nand_base.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c index 10c4f9919850..b01d15ec4c56 100644 --- a/drivers/mtd/nand/raw/nand_base.c +++ b/drivers/mtd/nand/raw/nand_base.c @@ -440,7 +440,7 @@ static int nand_block_bad(struct mtd_info *mtd, loff_t ofs) for (; page < page_end; page++) { res = chip->ecc.read_oob(mtd, chip, page); - if (res) + if (res < 0) return res; bad = chip->oob_poi[chip->badblockpos]; -- cgit v1.2.3 From 81e167c2a216e7b54e6add9d2badcda267fe33b1 Mon Sep 17 00:00:00 2001 From: Jeffrin Jose T Date: Thu, 21 Jun 2018 22:30:20 +0530 Subject: selftests: bpf: notification about privilege required to run test_kmod.sh testing script The test_kmod.sh script require root privilege for the successful execution of the test. This patch is to notify the user about the privilege the script demands for the successful execution of the test. Signed-off-by: Jeffrin Jose T (Rajagiri SET) Signed-off-by: Daniel Borkmann --- tools/testing/selftests/bpf/test_kmod.sh | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/tools/testing/selftests/bpf/test_kmod.sh b/tools/testing/selftests/bpf/test_kmod.sh index 35669ccd4d23..9df0d2ac45f8 100755 --- a/tools/testing/selftests/bpf/test_kmod.sh +++ b/tools/testing/selftests/bpf/test_kmod.sh @@ -1,6 +1,15 @@ #!/bin/sh # SPDX-License-Identifier: GPL-2.0 +# Kselftest framework requirement - SKIP code is 4. +ksft_skip=4 + +msg="skip all tests:" +if [ "$(id -u)" != "0" ]; then + echo $msg please run this as root >&2 + exit $ksft_skip +fi + SRC_TREE=../../../../ test_run() -- cgit v1.2.3 From fe3dd97dd66bb7fb23b8077a3803d2f951e60b00 Mon Sep 17 00:00:00 2001 From: Mason Yang Date: Wed, 20 Jun 2018 11:46:30 +0200 Subject: mtd: rawnand: All AC chips have a broken GET_FEATURES(TIMINGS). Make sure we flag all broken chips as not supporting this feature. Also move this logic to a new function to keep things readable. Fixes: 34c5c01e0c8c ("mtd: rawnand: macronix: nack the support of changing timings for one chip") Cc: Signed-off-by: Mason Yang Signed-off-by: Boris Brezillon Reviewed-by: Miquel Raynal --- drivers/mtd/nand/raw/nand_macronix.c | 48 +++++++++++++++++++++++++++--------- 1 file changed, 36 insertions(+), 12 deletions(-) diff --git a/drivers/mtd/nand/raw/nand_macronix.c b/drivers/mtd/nand/raw/nand_macronix.c index 7ed1f87e742a..49c546c97c6f 100644 --- a/drivers/mtd/nand/raw/nand_macronix.c +++ b/drivers/mtd/nand/raw/nand_macronix.c @@ -17,23 +17,47 @@ #include +/* + * Macronix AC series does not support using SET/GET_FEATURES to change + * the timings unlike what is declared in the parameter page. Unflag + * this feature to avoid unnecessary downturns. + */ +static void macronix_nand_fix_broken_get_timings(struct nand_chip *chip) +{ + unsigned int i; + static const char * const broken_get_timings[] = { + "MX30LF1G18AC", + "MX30LF1G28AC", + "MX30LF2G18AC", + "MX30LF2G28AC", + "MX30LF4G18AC", + "MX30LF4G28AC", + "MX60LF8G18AC", + }; + + if (!chip->parameters.supports_set_get_features) + return; + + for (i = 0; i < ARRAY_SIZE(broken_get_timings); i++) { + if (!strcmp(broken_get_timings[i], chip->parameters.model)) + break; + } + + if (i == ARRAY_SIZE(broken_get_timings)) + return; + + bitmap_clear(chip->parameters.get_feature_list, + ONFI_FEATURE_ADDR_TIMING_MODE, 1); + bitmap_clear(chip->parameters.set_feature_list, + ONFI_FEATURE_ADDR_TIMING_MODE, 1); +} + static int macronix_nand_init(struct nand_chip *chip) { if (nand_is_slc(chip)) chip->bbt_options |= NAND_BBT_SCAN2NDPAGE; - /* - * MX30LF2G18AC chip does not support using SET/GET_FEATURES to change - * the timings unlike what is declared in the parameter page. Unflag - * this feature to avoid unnecessary downturns. - */ - if (chip->parameters.supports_set_get_features && - !strcmp("MX30LF2G18AC", chip->parameters.model)) { - bitmap_clear(chip->parameters.get_feature_list, - ONFI_FEATURE_ADDR_TIMING_MODE, 1); - bitmap_clear(chip->parameters.set_feature_list, - ONFI_FEATURE_ADDR_TIMING_MODE, 1); - } + macronix_nand_fix_broken_get_timings(chip); return 0; } -- cgit v1.2.3 From 3e1a61b30c6a3a31314570c0c418a6bf84b056b1 Mon Sep 17 00:00:00 2001 From: Yonghong Song Date: Thu, 21 Jun 2018 10:02:20 -0700 Subject: tools/bpf: fix test_sockmap failure On one of our production test machine, when running bpf selftest test_sockmap, I got the following error: # sudo ./test_sockmap libbpf: failed to create map (name: 'sock_map'): Operation not permitted libbpf: failed to load object 'test_sockmap_kern.o' libbpf: Can't get the 0th fd from program sk_skb1: only -1 instances ...... load_bpf_file: (-1) Operation not permitted ERROR: (-1) load bpf failed The error is due to not-big-enough rlimit struct rlimit r = {10 * 1024 * 1024, RLIM_INFINITY}; The test already includes "bpf_rlimit.h", which sets current and max rlimit to RLIM_INFINITY. Let us just use it. Signed-off-by: Yonghong Song Signed-off-by: Daniel Borkmann --- tools/testing/selftests/bpf/test_sockmap.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/tools/testing/selftests/bpf/test_sockmap.c b/tools/testing/selftests/bpf/test_sockmap.c index 05c8cb71724a..9e78df207919 100644 --- a/tools/testing/selftests/bpf/test_sockmap.c +++ b/tools/testing/selftests/bpf/test_sockmap.c @@ -1413,18 +1413,12 @@ out: int main(int argc, char **argv) { - struct rlimit r = {10 * 1024 * 1024, RLIM_INFINITY}; int iov_count = 1, length = 1024, rate = 1; struct sockmap_options options = {0}; int opt, longindex, err, cg_fd = 0; char *bpf_file = BPF_SOCKMAP_FILENAME; int test = PING_PONG; - if (setrlimit(RLIMIT_MEMLOCK, &r)) { - perror("setrlimit(RLIMIT_MEMLOCK)"); - return 1; - } - if (argc < 2) return test_suite(); -- cgit v1.2.3 From f93aa8c4de307069c270b2d81741961162bead6c Mon Sep 17 00:00:00 2001 From: Joakim Tjernlund Date: Wed, 6 Jun 2018 12:13:27 +0200 Subject: mtd: cfi_cmdset_0002: Use right chip in do_ppb_xxlock() do_ppb_xxlock() fails to add chip->start when querying for lock status (and chip_ready test), which caused false status reports. Fix that by adding adr += chip->start and adjust call sites accordingly. Fixes: 1648eaaa1575 ("mtd: cfi_cmdset_0002: Support Persistent Protection Bits (PPB) locking") Cc: stable@vger.kernel.org Signed-off-by: Joakim Tjernlund Signed-off-by: Boris Brezillon --- drivers/mtd/chips/cfi_cmdset_0002.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c index a0c655628d6d..aa09d5155429 100644 --- a/drivers/mtd/chips/cfi_cmdset_0002.c +++ b/drivers/mtd/chips/cfi_cmdset_0002.c @@ -2544,8 +2544,9 @@ static int __maybe_unused do_ppb_xxlock(struct map_info *map, unsigned long timeo; int ret; + adr += chip->start; mutex_lock(&chip->mutex); - ret = get_chip(map, chip, adr + chip->start, FL_LOCKING); + ret = get_chip(map, chip, adr, FL_LOCKING); if (ret) { mutex_unlock(&chip->mutex); return ret; @@ -2563,8 +2564,8 @@ static int __maybe_unused do_ppb_xxlock(struct map_info *map, if (thunk == DO_XXLOCK_ONEBLOCK_LOCK) { chip->state = FL_LOCKING; - map_write(map, CMD(0xA0), chip->start + adr); - map_write(map, CMD(0x00), chip->start + adr); + map_write(map, CMD(0xA0), adr); + map_write(map, CMD(0x00), adr); } else if (thunk == DO_XXLOCK_ONEBLOCK_UNLOCK) { /* * Unlocking of one specific sector is not supported, so we @@ -2602,7 +2603,7 @@ static int __maybe_unused do_ppb_xxlock(struct map_info *map, map_write(map, CMD(0x00), chip->start); chip->state = FL_READY; - put_chip(map, chip, adr + chip->start); + put_chip(map, chip, adr); mutex_unlock(&chip->mutex); return ret; -- cgit v1.2.3 From 5fdfc3dbad099281bf027a353d5786c09408a8e5 Mon Sep 17 00:00:00 2001 From: Joakim Tjernlund Date: Wed, 6 Jun 2018 12:13:28 +0200 Subject: mtd: cfi_cmdset_0002: fix SEGV unlocking multiple chips cfi_ppb_unlock() tries to relock all sectors that were locked before unlocking the whole chip. This locking used the chip start address + the FULL offset from the first flash chip, thereby forming an illegal address. Fix that by using the chip offset(adr). Fixes: 1648eaaa1575 ("mtd: cfi_cmdset_0002: Support Persistent Protection Bits (PPB) locking") Cc: stable@vger.kernel.org Signed-off-by: Joakim Tjernlund Signed-off-by: Boris Brezillon --- drivers/mtd/chips/cfi_cmdset_0002.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c index aa09d5155429..87f9925d25f9 100644 --- a/drivers/mtd/chips/cfi_cmdset_0002.c +++ b/drivers/mtd/chips/cfi_cmdset_0002.c @@ -2526,7 +2526,7 @@ static int cfi_atmel_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len) struct ppb_lock { struct flchip *chip; - loff_t offset; + unsigned long adr; int locked; }; @@ -2662,7 +2662,7 @@ static int __maybe_unused cfi_ppb_unlock(struct mtd_info *mtd, loff_t ofs, */ if ((adr < ofs) || (adr >= (ofs + len))) { sect[sectors].chip = &cfi->chips[chipnum]; - sect[sectors].offset = offset; + sect[sectors].adr = adr; sect[sectors].locked = do_ppb_xxlock( map, &cfi->chips[chipnum], adr, 0, DO_XXLOCK_ONEBLOCK_GETLOCK); @@ -2706,7 +2706,7 @@ static int __maybe_unused cfi_ppb_unlock(struct mtd_info *mtd, loff_t ofs, */ for (i = 0; i < sectors; i++) { if (sect[i].locked) - do_ppb_xxlock(map, sect[i].chip, sect[i].offset, 0, + do_ppb_xxlock(map, sect[i].chip, sect[i].adr, 0, DO_XXLOCK_ONEBLOCK_LOCK); } -- cgit v1.2.3 From 0cd8116f172eed018907303dbff5c112690eeb91 Mon Sep 17 00:00:00 2001 From: Joakim Tjernlund Date: Wed, 6 Jun 2018 12:13:29 +0200 Subject: mtd: cfi_cmdset_0002: Fix unlocking requests crossing a chip boudary The "sector is in requested range" test used to determine whether sectors should be re-locked or not is done on a variable that is reset everytime we cross a chip boundary, which can lead to some blocks being re-locked while the caller expect them to be unlocked. Fix the check to make sure this cannot happen. Fixes: 1648eaaa1575 ("mtd: cfi_cmdset_0002: Support Persistent Protection Bits (PPB) locking") Cc: stable@vger.kernel.org Signed-off-by: Joakim Tjernlund Signed-off-by: Boris Brezillon --- drivers/mtd/chips/cfi_cmdset_0002.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c index 87f9925d25f9..9cfc2645dd93 100644 --- a/drivers/mtd/chips/cfi_cmdset_0002.c +++ b/drivers/mtd/chips/cfi_cmdset_0002.c @@ -2660,7 +2660,7 @@ static int __maybe_unused cfi_ppb_unlock(struct mtd_info *mtd, loff_t ofs, * sectors shall be unlocked, so lets keep their locking * status at "unlocked" (locked=0) for the final re-locking. */ - if ((adr < ofs) || (adr >= (ofs + len))) { + if ((offset < ofs) || (offset >= (ofs + len))) { sect[sectors].chip = &cfi->chips[chipnum]; sect[sectors].adr = adr; sect[sectors].locked = do_ppb_xxlock( -- cgit v1.2.3 From 24bb555e6e46d96e2a954aa0295029a81cc9bbaa Mon Sep 17 00:00:00 2001 From: Aaron Ma Date: Thu, 21 Jun 2018 17:14:01 -0700 Subject: Input: elantech - enable middle button of touchpads on ThinkPad P52 PNPID is better way to identify the type of touchpads. Enable middle button support on 2 types of touchpads on Lenovo P52. Cc: stable@vger.kernel.org Signed-off-by: Aaron Ma Reviewed-by: Benjamin Tissoires Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/elantech.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c index fb4d902c4403..4c52e43c9273 100644 --- a/drivers/input/mouse/elantech.c +++ b/drivers/input/mouse/elantech.c @@ -1175,6 +1175,12 @@ static const struct dmi_system_id elantech_dmi_has_middle_button[] = { { } }; +static const char * const middle_button_pnp_ids[] = { + "LEN2131", /* ThinkPad P52 w/ NFC */ + "LEN2132", /* ThinkPad P52 */ + NULL +}; + /* * Set the appropriate event bits for the input subsystem */ @@ -1194,7 +1200,8 @@ static int elantech_set_input_params(struct psmouse *psmouse) __clear_bit(EV_REL, dev->evbit); __set_bit(BTN_LEFT, dev->keybit); - if (dmi_check_system(elantech_dmi_has_middle_button)) + if (dmi_check_system(elantech_dmi_has_middle_button) || + psmouse_matches_pnp_id(psmouse, middle_button_pnp_ids)) __set_bit(BTN_MIDDLE, dev->keybit); __set_bit(BTN_RIGHT, dev->keybit); -- cgit v1.2.3 From e0ae2519ca004a628fa55aeef969c37edce522d3 Mon Sep 17 00:00:00 2001 From: ??? Date: Thu, 21 Jun 2018 17:15:32 -0700 Subject: Input: elantech - fix V4 report decoding for module with middle key Some touchpad has middle key and it will be indicated in bit 2 of packet[0]. We need to fix V4 formation's byte mask to prevent error decoding. Signed-off-by: KT Liao Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/elantech.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c index 4c52e43c9273..dd85b16dc6f8 100644 --- a/drivers/input/mouse/elantech.c +++ b/drivers/input/mouse/elantech.c @@ -799,7 +799,7 @@ static int elantech_packet_check_v4(struct psmouse *psmouse) else if (ic_version == 7 && etd->info.samples[1] == 0x2A) sanity_check = ((packet[3] & 0x1c) == 0x10); else - sanity_check = ((packet[0] & 0x0c) == 0x04 && + sanity_check = ((packet[0] & 0x08) == 0x00 && (packet[3] & 0x1c) == 0x10); if (!sanity_check) -- cgit v1.2.3 From 8938fc7b8fe9ccfa11751ead502a8d385b607967 Mon Sep 17 00:00:00 2001 From: Alexandr Savca Date: Thu, 21 Jun 2018 17:12:54 -0700 Subject: Input: elan_i2c - add ELAN0618 (Lenovo v330 15IKB) ACPI ID Add ELAN0618 to the list of supported touchpads; this ID is used in Lenovo v330 15IKB devices. Signed-off-by: Alexandr Savca Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/elan_i2c_core.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/input/mouse/elan_i2c_core.c b/drivers/input/mouse/elan_i2c_core.c index 8ff75114e762..f69d21610166 100644 --- a/drivers/input/mouse/elan_i2c_core.c +++ b/drivers/input/mouse/elan_i2c_core.c @@ -1345,6 +1345,7 @@ static const struct acpi_device_id elan_acpi_id[] = { { "ELAN060C", 0 }, { "ELAN0611", 0 }, { "ELAN0612", 0 }, + { "ELAN0618", 0 }, { "ELAN1000", 0 }, { } }; -- cgit v1.2.3 From 50fc7b61959af4b95fafce7fe5dd565199e0b61a Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Tue, 19 Jun 2018 11:17:32 -0700 Subject: Input: elan_i2c_smbus - fix more potential stack buffer overflows Commit 40f7090bb1b4 ("Input: elan_i2c_smbus - fix corrupted stack") fixed most of the functions using i2c_smbus_read_block_data() to allocate a buffer with the maximum block size. However three functions were left unchanged: * In elan_smbus_initialize(), increase the buffer size in the same way. * In elan_smbus_calibrate_result(), the buffer is provided by the caller (calibrate_store()), so introduce a bounce buffer. Also name the result buffer size. * In elan_smbus_get_report(), the buffer is provided by the caller but happens to be the right length. Add a compile-time assertion to ensure this remains the case. Cc: # 3.19+ Signed-off-by: Ben Hutchings Reviewed-by: Benjamin Tissoires Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/elan_i2c.h | 2 ++ drivers/input/mouse/elan_i2c_core.c | 2 +- drivers/input/mouse/elan_i2c_smbus.c | 10 ++++++++-- 3 files changed, 11 insertions(+), 3 deletions(-) diff --git a/drivers/input/mouse/elan_i2c.h b/drivers/input/mouse/elan_i2c.h index 599544c1a91c..243e0fa6e3e3 100644 --- a/drivers/input/mouse/elan_i2c.h +++ b/drivers/input/mouse/elan_i2c.h @@ -27,6 +27,8 @@ #define ETP_DISABLE_POWER 0x0001 #define ETP_PRESSURE_OFFSET 25 +#define ETP_CALIBRATE_MAX_LEN 3 + /* IAP Firmware handling */ #define ETP_PRODUCT_ID_FORMAT_STRING "%d.0" #define ETP_FW_NAME "elan_i2c_" ETP_PRODUCT_ID_FORMAT_STRING ".bin" diff --git a/drivers/input/mouse/elan_i2c_core.c b/drivers/input/mouse/elan_i2c_core.c index f69d21610166..1f9cd7d8b7ad 100644 --- a/drivers/input/mouse/elan_i2c_core.c +++ b/drivers/input/mouse/elan_i2c_core.c @@ -613,7 +613,7 @@ static ssize_t calibrate_store(struct device *dev, int tries = 20; int retval; int error; - u8 val[3]; + u8 val[ETP_CALIBRATE_MAX_LEN]; retval = mutex_lock_interruptible(&data->sysfs_mutex); if (retval) diff --git a/drivers/input/mouse/elan_i2c_smbus.c b/drivers/input/mouse/elan_i2c_smbus.c index cfcb32559925..c060d270bc4d 100644 --- a/drivers/input/mouse/elan_i2c_smbus.c +++ b/drivers/input/mouse/elan_i2c_smbus.c @@ -56,7 +56,7 @@ static int elan_smbus_initialize(struct i2c_client *client) { u8 check[ETP_SMBUS_HELLOPACKET_LEN] = { 0x55, 0x55, 0x55, 0x55, 0x55 }; - u8 values[ETP_SMBUS_HELLOPACKET_LEN] = { 0, 0, 0, 0, 0 }; + u8 values[I2C_SMBUS_BLOCK_MAX] = {0}; int len, error; /* Get hello packet */ @@ -117,12 +117,16 @@ static int elan_smbus_calibrate(struct i2c_client *client) static int elan_smbus_calibrate_result(struct i2c_client *client, u8 *val) { int error; + u8 buf[I2C_SMBUS_BLOCK_MAX] = {0}; + + BUILD_BUG_ON(ETP_CALIBRATE_MAX_LEN > sizeof(buf)); error = i2c_smbus_read_block_data(client, - ETP_SMBUS_CALIBRATE_QUERY, val); + ETP_SMBUS_CALIBRATE_QUERY, buf); if (error < 0) return error; + memcpy(val, buf, ETP_CALIBRATE_MAX_LEN); return 0; } @@ -472,6 +476,8 @@ static int elan_smbus_get_report(struct i2c_client *client, u8 *report) { int len; + BUILD_BUG_ON(I2C_SMBUS_BLOCK_MAX > ETP_SMBUS_REPORT_LEN); + len = i2c_smbus_read_block_data(client, ETP_SMBUS_PACKET_QUERY, &report[ETP_SMBUS_REPORT_OFFSET]); -- cgit v1.2.3 From dd6bee81c942c0ea01030da9356026afb88f9d18 Mon Sep 17 00:00:00 2001 From: Enno Boland Date: Tue, 19 Jun 2018 11:55:33 -0700 Subject: Input: xpad - fix GPD Win 2 controller name This fixes using the controller with SDL2. SDL2 has a naive algorithm to apply the correct settings to a controller. For X-Box compatible controllers it expects that the controller name contains a variation of a 'XBOX'-string. This patch changes the identifier to contain "X-Box" as substring. Tested with Steam and C-Dogs-SDL which both detect the controller properly after adding this patch. Fixes: c1ba08390a8b ("Input: xpad - add GPD Win 2 Controller USB IDs") Cc: stable@vger.kernel.org Signed-off-by: Enno Boland Signed-off-by: Dmitry Torokhov --- drivers/input/joystick/xpad.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c index 48e36acbeb49..cd620e009bad 100644 --- a/drivers/input/joystick/xpad.c +++ b/drivers/input/joystick/xpad.c @@ -125,7 +125,7 @@ static const struct xpad_device { u8 mapping; u8 xtype; } xpad_device[] = { - { 0x0079, 0x18d4, "GPD Win 2 Controller", 0, XTYPE_XBOX360 }, + { 0x0079, 0x18d4, "GPD Win 2 X-Box Controller", 0, XTYPE_XBOX360 }, { 0x044f, 0x0f00, "Thrustmaster Wheel", 0, XTYPE_XBOX }, { 0x044f, 0x0f03, "Thrustmaster Wheel", 0, XTYPE_XBOX }, { 0x044f, 0x0f07, "Thrustmaster, Inc. Controller", 0, XTYPE_XBOX }, -- cgit v1.2.3 From e2ac836307e346969737c60075fdb01bed1af503 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Thu, 21 Jun 2018 23:24:38 -0700 Subject: xfs: simplify xfs_bmap_punch_delalloc_range Instead of using xfs_bmapi_read to find delalloc extents and then punch them out using xfs_bunmapi, opencode the loop to iterate over the extents and call xfs_bmap_del_extent_delay directly. This both simplifies the code and reduces the number of extent tree lookups required. Signed-off-by: Christoph Hellwig Reviewed-by: Brian Foster Reviewed-by: Darrick J. Wong Signed-off-by: Darrick J. Wong --- fs/xfs/xfs_bmap_util.c | 85 +++++++++++++++++++------------------------------- 1 file changed, 32 insertions(+), 53 deletions(-) diff --git a/fs/xfs/xfs_bmap_util.c b/fs/xfs/xfs_bmap_util.c index c35009a86699..c195b9d857af 100644 --- a/fs/xfs/xfs_bmap_util.c +++ b/fs/xfs/xfs_bmap_util.c @@ -685,12 +685,10 @@ out_unlock_iolock: } /* - * dead simple method of punching delalyed allocation blocks from a range in - * the inode. Walks a block at a time so will be slow, but is only executed in - * rare error cases so the overhead is not critical. This will always punch out - * both the start and end blocks, even if the ranges only partially overlap - * them, so it is up to the caller to ensure that partial blocks are not - * passed in. + * Dead simple method of punching delalyed allocation blocks from a range in + * the inode. This will always punch out both the start and end blocks, even + * if the ranges only partially overlap them, so it is up to the caller to + * ensure that partial blocks are not passed in. */ int xfs_bmap_punch_delalloc_range( @@ -698,63 +696,44 @@ xfs_bmap_punch_delalloc_range( xfs_fileoff_t start_fsb, xfs_fileoff_t length) { - xfs_fileoff_t remaining = length; + struct xfs_ifork *ifp = &ip->i_df; + xfs_fileoff_t end_fsb = start_fsb + length; + struct xfs_bmbt_irec got, del; + struct xfs_iext_cursor icur; int error = 0; ASSERT(xfs_isilocked(ip, XFS_ILOCK_EXCL)); - do { - int done; - xfs_bmbt_irec_t imap; - int nimaps = 1; - xfs_fsblock_t firstblock; - struct xfs_defer_ops dfops; + if (!(ifp->if_flags & XFS_IFEXTENTS)) { + error = xfs_iread_extents(NULL, ip, XFS_DATA_FORK); + if (error) + return error; + } - /* - * Map the range first and check that it is a delalloc extent - * before trying to unmap the range. Otherwise we will be - * trying to remove a real extent (which requires a - * transaction) or a hole, which is probably a bad idea... - */ - error = xfs_bmapi_read(ip, start_fsb, 1, &imap, &nimaps, - XFS_BMAPI_ENTIRE); + if (!xfs_iext_lookup_extent_before(ip, ifp, &end_fsb, &icur, &got)) + return 0; - if (error) { - /* something screwed, just bail */ - if (!XFS_FORCED_SHUTDOWN(ip->i_mount)) { - xfs_alert(ip->i_mount, - "Failed delalloc mapping lookup ino %lld fsb %lld.", - ip->i_ino, start_fsb); - } - break; - } - if (!nimaps) { - /* nothing there */ - goto next_block; - } - if (imap.br_startblock != DELAYSTARTBLOCK) { - /* been converted, ignore */ - goto next_block; - } - WARN_ON(imap.br_blockcount == 0); + while (got.br_startoff + got.br_blockcount > start_fsb) { + del = got; + xfs_trim_extent(&del, start_fsb, length); /* - * Note: while we initialise the firstblock/dfops pair, they - * should never be used because blocks should never be - * allocated or freed for a delalloc extent and hence we need - * don't cancel or finish them after the xfs_bunmapi() call. + * A delete can push the cursor forward. Step back to the + * previous extent on non-delalloc or extents outside the + * target range. */ - xfs_defer_init(&dfops, &firstblock); - error = xfs_bunmapi(NULL, ip, start_fsb, 1, 0, 1, &firstblock, - &dfops, &done); - if (error) - break; + if (!del.br_blockcount || + !isnullstartblock(del.br_startblock)) { + if (!xfs_iext_prev_extent(ifp, &icur, &got)) + break; + continue; + } - ASSERT(!xfs_defer_has_unfinished_work(&dfops)); -next_block: - start_fsb++; - remaining--; - } while(remaining > 0); + error = xfs_bmap_del_extent_delay(ip, XFS_DATA_FORK, &icur, + &got, &del); + if (error || !xfs_iext_get_extent(ifp, &icur, &got)) + break; + } return error; } -- cgit v1.2.3 From 23fcb3340d033d9f081e21e6c12c2db7eaa541d3 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Thu, 21 Jun 2018 23:25:57 -0700 Subject: xfs: More robust inode extent count validation When the inode is in extent format, it can't have more extents that fit in the inode fork. We don't currenty check this, and so this corruption goes unnoticed by the inode verifiers. This can lead to crashes operating on invalid in-memory structures. Attempts to access such a inode will now error out in the verifier rather than allowing modification operations to proceed. Reported-by: Wen Xu Signed-off-by: Dave Chinner Reviewed-by: Darrick J. Wong [darrick: fix a typedef, add some braces and breaks to shut up compiler warnings] Signed-off-by: Darrick J. Wong --- fs/xfs/libxfs/xfs_format.h | 3 ++ fs/xfs/libxfs/xfs_inode_buf.c | 76 ++++++++++++++++++++++++++----------------- 2 files changed, 50 insertions(+), 29 deletions(-) diff --git a/fs/xfs/libxfs/xfs_format.h b/fs/xfs/libxfs/xfs_format.h index 1c5a8aaf2bfc..7b4a43deb83e 100644 --- a/fs/xfs/libxfs/xfs_format.h +++ b/fs/xfs/libxfs/xfs_format.h @@ -962,6 +962,9 @@ typedef enum xfs_dinode_fmt { XFS_DFORK_DSIZE(dip, mp) : \ XFS_DFORK_ASIZE(dip, mp)) +#define XFS_DFORK_MAXEXT(dip, mp, w) \ + (XFS_DFORK_SIZE(dip, mp, w) / sizeof(struct xfs_bmbt_rec)) + /* * Return pointers to the data or attribute forks. */ diff --git a/fs/xfs/libxfs/xfs_inode_buf.c b/fs/xfs/libxfs/xfs_inode_buf.c index d38d724534c4..33dc34655ac3 100644 --- a/fs/xfs/libxfs/xfs_inode_buf.c +++ b/fs/xfs/libxfs/xfs_inode_buf.c @@ -374,6 +374,47 @@ xfs_log_dinode_to_disk( } } +static xfs_failaddr_t +xfs_dinode_verify_fork( + struct xfs_dinode *dip, + struct xfs_mount *mp, + int whichfork) +{ + uint32_t di_nextents = XFS_DFORK_NEXTENTS(dip, whichfork); + + switch (XFS_DFORK_FORMAT(dip, whichfork)) { + case XFS_DINODE_FMT_LOCAL: + /* + * no local regular files yet + */ + if (whichfork == XFS_DATA_FORK) { + if (S_ISREG(be16_to_cpu(dip->di_mode))) + return __this_address; + if (be64_to_cpu(dip->di_size) > + XFS_DFORK_SIZE(dip, mp, whichfork)) + return __this_address; + } + if (di_nextents) + return __this_address; + break; + case XFS_DINODE_FMT_EXTENTS: + if (di_nextents > XFS_DFORK_MAXEXT(dip, mp, whichfork)) + return __this_address; + break; + case XFS_DINODE_FMT_BTREE: + if (whichfork == XFS_ATTR_FORK) { + if (di_nextents > MAXAEXTNUM) + return __this_address; + } else if (di_nextents > MAXEXTNUM) { + return __this_address; + } + break; + default: + return __this_address; + } + return NULL; +} + xfs_failaddr_t xfs_dinode_verify( struct xfs_mount *mp, @@ -441,24 +482,9 @@ xfs_dinode_verify( case S_IFREG: case S_IFLNK: case S_IFDIR: - switch (dip->di_format) { - case XFS_DINODE_FMT_LOCAL: - /* - * no local regular files yet - */ - if (S_ISREG(mode)) - return __this_address; - if (di_size > XFS_DFORK_DSIZE(dip, mp)) - return __this_address; - if (dip->di_nextents) - return __this_address; - /* fall through */ - case XFS_DINODE_FMT_EXTENTS: - case XFS_DINODE_FMT_BTREE: - break; - default: - return __this_address; - } + fa = xfs_dinode_verify_fork(dip, mp, XFS_DATA_FORK); + if (fa) + return fa; break; case 0: /* Uninitialized inode ok. */ @@ -468,17 +494,9 @@ xfs_dinode_verify( } if (XFS_DFORK_Q(dip)) { - switch (dip->di_aformat) { - case XFS_DINODE_FMT_LOCAL: - if (dip->di_anextents) - return __this_address; - /* fall through */ - case XFS_DINODE_FMT_EXTENTS: - case XFS_DINODE_FMT_BTREE: - break; - default: - return __this_address; - } + fa = xfs_dinode_verify_fork(dip, mp, XFS_ATTR_FORK); + if (fa) + return fa; } else { /* * If there is no fork offset, this may be a freshly-made inode -- cgit v1.2.3 From e53946dbd31a21f4bef155f8febba556933d62bf Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Thu, 21 Jun 2018 23:26:05 -0700 Subject: xfs: xfs_iflush_abort() can be called twice on cluster writeback failure When a corrupt inode is detected during xfs_iflush_cluster, we can get a shutdown ASSERT failure like this: XFS (pmem1): Metadata corruption detected at xfs_symlink_shortform_verify+0x5c/0xa0, inode 0x86627 data fork XFS (pmem1): Unmount and run xfs_repair XFS (pmem1): xfs_do_force_shutdown(0x8) called from line 3372 of file fs/xfs/xfs_inode.c. Return address = ffffffff814f4116 XFS (pmem1): Corruption of in-memory data detected. Shutting down filesystem XFS (pmem1): xfs_do_force_shutdown(0x1) called from line 222 of file fs/xfs/libxfs/xfs_defer.c. Return address = ffffffff814a8a88 XFS (pmem1): xfs_do_force_shutdown(0x1) called from line 222 of file fs/xfs/libxfs/xfs_defer.c. Return address = ffffffff814a8ef9 XFS (pmem1): Please umount the filesystem and rectify the problem(s) XFS: Assertion failed: xfs_isiflocked(ip), file: fs/xfs/xfs_inode.h, line: 258 ..... Call Trace: xfs_iflush_abort+0x10a/0x110 xfs_iflush+0xf3/0x390 xfs_inode_item_push+0x126/0x1e0 xfsaild+0x2c5/0x890 kthread+0x11c/0x140 ret_from_fork+0x24/0x30 Essentially, xfs_iflush_abort() has been called twice on the original inode that that was flushed. This happens because the inode has been flushed to teh buffer successfully via xfs_iflush_int(), and so when another inode is detected as corrupt in xfs_iflush_cluster, the buffer is marked stale and EIO, and iodone callbacks are run on it. Running the iodone callbacks walks across the original inode and calls xfs_iflush_abort() on it. When xfs_iflush_cluster() returns to xfs_iflush(), it runs the error path for that function, and that calls xfs_iflush_abort() on the inode a second time, leading to the above assert failure as the inode is not flush locked anymore. This bug has been there a long time. The simple fix would be to just avoid calling xfs_iflush_abort() in xfs_iflush() if we've got a failure from xfs_iflush_cluster(). However, xfs_iflush_cluster() has magic delwri buffer handling that means it may or may not have run IO completion on the buffer, and hence sometimes we have to call xfs_iflush_abort() from xfs_iflush(), and sometimes we shouldn't. After reading through all the error paths and the delwri buffer code, it's clear that the error handling in xfs_iflush_cluster() is unnecessary. If the buffer is delwri, it leaves it on the delwri list so that when the delwri list is submitted it sees a shutdown fliesystem in xfs_buf_submit() and that marks the buffer stale, EIO and runs IO completion. i.e. exactly what xfs+iflush_cluster() does when it's not a delwri buffer. Further, marking a buffer stale clears the _XBF_DELWRI_Q flag on the buffer, which means when submission of the buffer occurs, it just skips over it and releases it. IOWs, the error handling in xfs_iflush_cluster doesn't need to care if the buffer is already on a the delwri queue or not - it just needs to mark the buffer stale, EIO and run completions. That means we can just use the easy fix for xfs_iflush() to avoid the double abort. Signed-off-by: Dave Chinner Reviewed-by: Brian Foster Reviewed-by: Darrick J. Wong Signed-off-by: Darrick J. Wong --- fs/xfs/xfs_inode.c | 57 ++++++++++++++++++++---------------------------------- 1 file changed, 21 insertions(+), 36 deletions(-) diff --git a/fs/xfs/xfs_inode.c b/fs/xfs/xfs_inode.c index 7a96c4e0ab5c..5df4de666cc1 100644 --- a/fs/xfs/xfs_inode.c +++ b/fs/xfs/xfs_inode.c @@ -3236,7 +3236,6 @@ xfs_iflush_cluster( struct xfs_inode *cip; int nr_found; int clcount = 0; - int bufwasdelwri; int i; pag = xfs_perag_get(mp, XFS_INO_TO_AGNO(mp, ip->i_ino)); @@ -3360,37 +3359,22 @@ cluster_corrupt_out: * inode buffer and shut down the filesystem. */ rcu_read_unlock(); - /* - * Clean up the buffer. If it was delwri, just release it -- - * brelse can handle it with no problems. If not, shut down the - * filesystem before releasing the buffer. - */ - bufwasdelwri = (bp->b_flags & _XBF_DELWRI_Q); - if (bufwasdelwri) - xfs_buf_relse(bp); - xfs_force_shutdown(mp, SHUTDOWN_CORRUPT_INCORE); - if (!bufwasdelwri) { - /* - * Just like incore_relse: if we have b_iodone functions, - * mark the buffer as an error and call them. Otherwise - * mark it as stale and brelse. - */ - if (bp->b_iodone) { - bp->b_flags &= ~XBF_DONE; - xfs_buf_stale(bp); - xfs_buf_ioerror(bp, -EIO); - xfs_buf_ioend(bp); - } else { - xfs_buf_stale(bp); - xfs_buf_relse(bp); - } - } - /* - * Unlocks the flush lock + * We'll always have an inode attached to the buffer for completion + * process by the time we are called from xfs_iflush(). Hence we have + * always need to do IO completion processing to abort the inodes + * attached to the buffer. handle them just like the shutdown case in + * xfs_buf_submit(). */ + ASSERT(bp->b_iodone); + bp->b_flags &= ~XBF_DONE; + xfs_buf_stale(bp); + xfs_buf_ioerror(bp, -EIO); + xfs_buf_ioend(bp); + + /* abort the corrupt inode, as it was not attached to the buffer */ xfs_iflush_abort(cip, false); kmem_free(cilist); xfs_perag_put(pag); @@ -3486,12 +3470,17 @@ xfs_iflush( xfs_log_force(mp, 0); /* - * inode clustering: - * see if other inodes can be gathered into this write + * inode clustering: try to gather other inodes into this write + * + * Note: Any error during clustering will result in the filesystem + * being shut down and completion callbacks run on the cluster buffer. + * As we have already flushed and attached this inode to the buffer, + * it has already been aborted and released by xfs_iflush_cluster() and + * so we have no further error handling to do here. */ error = xfs_iflush_cluster(ip, bp); if (error) - goto cluster_corrupt_out; + return error; *bpp = bp; return 0; @@ -3500,12 +3489,8 @@ corrupt_out: if (bp) xfs_buf_relse(bp); xfs_force_shutdown(mp, SHUTDOWN_CORRUPT_INCORE); -cluster_corrupt_out: - error = -EFSCORRUPTED; abort_out: - /* - * Unlocks the flush lock - */ + /* abort the corrupt inode, as it was not attached to the buffer */ xfs_iflush_abort(ip, false); return error; } -- cgit v1.2.3 From f1ce87f6080b1dda7e7b1eda3da332add19d87b9 Mon Sep 17 00:00:00 2001 From: Joakim Tjernlund Date: Wed, 6 Jun 2018 12:13:30 +0200 Subject: mtd: cfi_cmdset_0002: Avoid walking all chips when unlocking. cfi_ppb_unlock() walks all flash chips when unlocking sectors, avoid walking chips unaffected by the unlock operation. Fixes: 1648eaaa1575 ("mtd: cfi_cmdset_0002: Support Persistent Protection Bits (PPB) locking") Cc: stable@vger.kernel.org Signed-off-by: Joakim Tjernlund Signed-off-by: Boris Brezillon --- drivers/mtd/chips/cfi_cmdset_0002.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c index 9cfc2645dd93..1b64ac8c5bc8 100644 --- a/drivers/mtd/chips/cfi_cmdset_0002.c +++ b/drivers/mtd/chips/cfi_cmdset_0002.c @@ -2676,6 +2676,8 @@ static int __maybe_unused cfi_ppb_unlock(struct mtd_info *mtd, loff_t ofs, i++; if (adr >> cfi->chipshift) { + if (offset >= (ofs + len)) + break; adr = 0; chipnum++; -- cgit v1.2.3 From cbdceb9b3e1928554fffd0d889adf2d0d8edee4d Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 22 Jun 2018 09:04:25 +0200 Subject: mtd: dataflash: Use ULL suffix for 64-bit constants MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit With gcc 4.1.2 when compiling for 32-bit: drivers/mtd/devices/mtd_dataflash.c:736: warning: integer constant is too large for ‘long’ type drivers/mtd/devices/mtd_dataflash.c:737: warning: integer constant is too large for ‘long’ type Add the missing "ULL" suffixes to fix this. Fixes: 67e4145ebf2c161d ("mtd: dataflash: Add flash_info for AT45DB641E") Signed-off-by: Geert Uytterhoeven Acked-by: Andrey Smirnov Signed-off-by: Boris Brezillon --- drivers/mtd/devices/mtd_dataflash.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/mtd/devices/mtd_dataflash.c b/drivers/mtd/devices/mtd_dataflash.c index 3a6f450d1093..53febe8a68c3 100644 --- a/drivers/mtd/devices/mtd_dataflash.c +++ b/drivers/mtd/devices/mtd_dataflash.c @@ -733,8 +733,8 @@ static struct flash_info dataflash_data[] = { { "AT45DB642x", 0x1f2800, 8192, 1056, 11, SUP_POW2PS}, { "at45db642d", 0x1f2800, 8192, 1024, 10, SUP_POW2PS | IS_POW2PS}, - { "AT45DB641E", 0x1f28000100, 32768, 264, 9, SUP_EXTID | SUP_POW2PS}, - { "at45db641e", 0x1f28000100, 32768, 256, 8, SUP_EXTID | SUP_POW2PS | IS_POW2PS}, + { "AT45DB641E", 0x1f28000100ULL, 32768, 264, 9, SUP_EXTID | SUP_POW2PS}, + { "at45db641e", 0x1f28000100ULL, 32768, 256, 8, SUP_EXTID | SUP_POW2PS | IS_POW2PS}, }; static struct flash_info *jedec_lookup(struct spi_device *spi, -- cgit v1.2.3 From 275ec0cb946cb75ac8977f662e608fce92f8b8a8 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 22 Jun 2018 12:17:45 +0200 Subject: ALSA: hda/realtek - Add a quirk for FSC ESPRIMO U9210 Fujitsu Seimens ESPRIMO Mobile U9210 requires the same fixup as H270 for the correct pin configs. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=200107 Cc: Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 487ceb9fd038..70bf4c30548a 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -2545,6 +2545,7 @@ static const struct snd_pci_quirk alc262_fixup_tbl[] = { SND_PCI_QUIRK(0x10cf, 0x1397, "Fujitsu Lifebook S7110", ALC262_FIXUP_FSC_S7110), SND_PCI_QUIRK(0x10cf, 0x142d, "Fujitsu Lifebook E8410", ALC262_FIXUP_BENQ), SND_PCI_QUIRK(0x10f1, 0x2915, "Tyan Thunder n6650W", ALC262_FIXUP_TYAN), + SND_PCI_QUIRK(0x1734, 0x1141, "FSC ESPRIMO U9210", ALC262_FIXUP_FSC_H270), SND_PCI_QUIRK(0x1734, 0x1147, "FSC Celsius H270", ALC262_FIXUP_FSC_H270), SND_PCI_QUIRK(0x17aa, 0x384e, "Lenovo 3000", ALC262_FIXUP_LENOVO_3000), SND_PCI_QUIRK(0x17ff, 0x0560, "Benq ED8", ALC262_FIXUP_BENQ), -- cgit v1.2.3 From c5b4a50b74018b3677098151ec5f4fce07d5e6a0 Mon Sep 17 00:00:00 2001 From: Filipe Manana Date: Mon, 11 Jun 2018 19:24:16 +0100 Subject: Btrfs: fix return value on rename exchange failure If we failed during a rename exchange operation after starting/joining a transaction, we would end up replacing the return value, stored in the local 'ret' variable, with the return value from btrfs_end_transaction(). So this could end up returning 0 (success) to user space despite the operation having failed and aborted the transaction, because if there are multiple tasks having a reference on the transaction at the time btrfs_end_transaction() is called by the rename exchange, that function returns 0 (otherwise it returns -EIO and not the original error value). So fix this by not overwriting the return value on error after getting a transaction handle. Fixes: cdd1fedf8261 ("btrfs: add support for RENAME_EXCHANGE and RENAME_WHITEOUT") CC: stable@vger.kernel.org # 4.9+ Signed-off-by: Filipe Manana Reviewed-by: David Sterba Signed-off-by: David Sterba --- fs/btrfs/inode.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index c12b7a6e534a..a6bf9e2ff68f 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -9443,6 +9443,7 @@ static int btrfs_rename_exchange(struct inode *old_dir, u64 new_idx = 0; u64 root_objectid; int ret; + int ret2; bool root_log_pinned = false; bool dest_log_pinned = false; @@ -9639,7 +9640,8 @@ out_fail: dest_log_pinned = false; } } - ret = btrfs_end_transaction(trans); + ret2 = btrfs_end_transaction(trans); + ret = ret ? ret : ret2; out_notrans: if (new_ino == BTRFS_FIRST_FREE_OBJECTID) up_read(&fs_info->subvol_sem); -- cgit v1.2.3 From 3f6e6986045d47f87bd982910821b7ab9758487e Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Sat, 23 Jun 2018 01:06:34 +0900 Subject: mtd: rawnand: denali_dt: set clk_x_rate to 200 MHz unconditionally Since commit 1bb88666775e ("mtd: nand: denali: handle timing parameters by setup_data_interface()"), denali_dt.c gets the clock rate from the clock driver. The driver expects the frequency of the bus interface clock, whereas the clock driver of SOCFPGA provides the core clock. Thus, the setup_data_interface() hook calculates timing parameters based on a wrong frequency. To make it work without relying on the clock driver, hard-code the clock frequency, 200MHz. This is fine for existing DT of UniPhier, and also fixes the issue of SOCFPGA because both platforms use 200 MHz for the bus interface clock. Fixes: 1bb88666775e ("mtd: nand: denali: handle timing parameters by setup_data_interface()") Cc: linux-stable #4.14+ Reported-by: Philipp Rosenberger Suggested-by: Boris Brezillon Signed-off-by: Masahiro Yamada Tested-by: Richard Weinberger Signed-off-by: Boris Brezillon --- drivers/mtd/nand/raw/denali_dt.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/mtd/nand/raw/denali_dt.c b/drivers/mtd/nand/raw/denali_dt.c index cfd33e6ca77f..5869e90cc14b 100644 --- a/drivers/mtd/nand/raw/denali_dt.c +++ b/drivers/mtd/nand/raw/denali_dt.c @@ -123,7 +123,11 @@ static int denali_dt_probe(struct platform_device *pdev) if (ret) return ret; - denali->clk_x_rate = clk_get_rate(dt->clk); + /* + * Hardcode the clock rate for the backward compatibility. + * This works for both SOCFPGA and UniPhier. + */ + denali->clk_x_rate = 200000000; ret = denali_init(denali); if (ret) -- cgit v1.2.3 From f21c601a2bb319ec19eb4562eadc7797d90fd90e Mon Sep 17 00:00:00 2001 From: Mike Snitzer Date: Fri, 15 Jun 2018 09:35:33 -0400 Subject: dm: use bio_split() when splitting out the already processed bio Use of bio_clone_bioset() is inefficient if there is no need to clone the original bio's bio_vec array. Best to use the bio_clone_fast() variant. Also, just using bio_advance() is only part of what is needed to properly setup the clone -- it doesn't account for the various bio_integrity() related work that also needs to be performed (see bio_split). Address both of these issues by switching from bio_clone_bioset() to bio_split(). Fixes: 18a25da8 ("dm: ensure bio submission follows a depth-first tree walk") Cc: stable@vger.kernel.org # 4.15+, requires removal of '&' before md->queue->bio_split Reported-by: Christoph Hellwig Reviewed-by: NeilBrown Signed-off-by: Mike Snitzer --- drivers/md/dm.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/md/dm.c b/drivers/md/dm.c index e65429a29c06..a3b103e8e3ce 100644 --- a/drivers/md/dm.c +++ b/drivers/md/dm.c @@ -1606,10 +1606,9 @@ static blk_qc_t __split_and_process_bio(struct mapped_device *md, * the usage of io->orig_bio in dm_remap_zone_report() * won't be affected by this reassignment. */ - struct bio *b = bio_clone_bioset(bio, GFP_NOIO, - &md->queue->bio_split); + struct bio *b = bio_split(bio, bio_sectors(bio) - ci.sector_count, + GFP_NOIO, &md->queue->bio_split); ci.io->orig_bio = b; - bio_advance(bio, (bio_sectors(bio) - ci.sector_count) << 9); bio_chain(b, bio); ret = generic_make_request(bio); break; -- cgit v1.2.3 From 7ccdbf85d3b2237cdbdafe6a47673dbdfab4b7a2 Mon Sep 17 00:00:00 2001 From: Mike Snitzer Date: Mon, 18 Jun 2018 11:57:51 -0400 Subject: dm thin metadata: remove needless work from __commit_transaction Commit 5a32083d03fb5 ("dm: take care to copy the space map roots before locking the superblock") properly removed the calls to dm_sm_root_size() from __write_initial_superblock(). But the dm_sm_root_size() calls were left dangling in __commit_transaction(). Fixes: 5a32083d03fb5 ("dm: take care to copy the space map roots before locking the superblock") Signed-off-by: Mike Snitzer --- drivers/md/dm-thin-metadata.c | 9 --------- 1 file changed, 9 deletions(-) diff --git a/drivers/md/dm-thin-metadata.c b/drivers/md/dm-thin-metadata.c index 36ef284ad086..72142021b5c9 100644 --- a/drivers/md/dm-thin-metadata.c +++ b/drivers/md/dm-thin-metadata.c @@ -776,7 +776,6 @@ static int __write_changed_details(struct dm_pool_metadata *pmd) static int __commit_transaction(struct dm_pool_metadata *pmd) { int r; - size_t metadata_len, data_len; struct thin_disk_superblock *disk_super; struct dm_block *sblock; @@ -797,14 +796,6 @@ static int __commit_transaction(struct dm_pool_metadata *pmd) if (r < 0) return r; - r = dm_sm_root_size(pmd->metadata_sm, &metadata_len); - if (r < 0) - return r; - - r = dm_sm_root_size(pmd->data_sm, &data_len); - if (r < 0) - return r; - r = save_sm_roots(pmd); if (r < 0) return r; -- cgit v1.2.3 From 50a7d3ba7c9ac5e0b7e03fc7f420180989361dbf Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Mon, 18 Jun 2018 10:50:33 -0700 Subject: dm writecache: use 2-factor allocator arguments This adjusts the allocator calls to use the 2-factor argument style, as already done treewide for better defense against allocator overflows. Signed-off-by: Kees Cook [snitzer: tweaked code to leave assignment in a test alone] Signed-off-by: Mike Snitzer --- drivers/md/dm-writecache.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/md/dm-writecache.c b/drivers/md/dm-writecache.c index 5961c7794ef3..07ea6a48aac6 100644 --- a/drivers/md/dm-writecache.c +++ b/drivers/md/dm-writecache.c @@ -259,7 +259,7 @@ static int persistent_memory_claim(struct dm_writecache *wc) if (da != p) { long i; wc->memory_map = NULL; - pages = kvmalloc(p * sizeof(struct page *), GFP_KERNEL); + pages = kvmalloc_array(p, sizeof(struct page *), GFP_KERNEL); if (!pages) { r = -ENOMEM; goto err2; @@ -859,7 +859,7 @@ static int writecache_alloc_entries(struct dm_writecache *wc) if (wc->entries) return 0; - wc->entries = vmalloc(sizeof(struct wc_entry) * wc->n_blocks); + wc->entries = vmalloc(array_size(sizeof(struct wc_entry), wc->n_blocks)); if (!wc->entries) return -ENOMEM; for (b = 0; b < wc->n_blocks; b++) { @@ -1481,9 +1481,9 @@ static void __writecache_writeback_pmem(struct dm_writecache *wc, struct writeba wb->bio.bi_iter.bi_sector = read_original_sector(wc, e); wb->page_offset = PAGE_SIZE; if (max_pages <= WB_LIST_INLINE || - unlikely(!(wb->wc_list = kmalloc(max_pages * sizeof(struct wc_entry *), - GFP_NOIO | __GFP_NORETRY | - __GFP_NOMEMALLOC | __GFP_NOWARN)))) { + unlikely(!(wb->wc_list = kmalloc_array(max_pages, sizeof(struct wc_entry *), + GFP_NOIO | __GFP_NORETRY | + __GFP_NOMEMALLOC | __GFP_NOWARN)))) { wb->wc_list = wb->wc_list_inline; max_pages = WB_LIST_INLINE; } -- cgit v1.2.3 From 2d0b2d64d325e22939d9db3ba784f1236459ed98 Mon Sep 17 00:00:00 2001 From: Bart Van Assche Date: Fri, 22 Jun 2018 08:09:11 -0700 Subject: dm zoned: avoid triggering reclaim from inside dmz_map() This patch avoids that lockdep reports the following: ====================================================== WARNING: possible circular locking dependency detected 4.18.0-rc1 #62 Not tainted ------------------------------------------------------ kswapd0/84 is trying to acquire lock: 00000000c313516d (&xfs_nondir_ilock_class){++++}, at: xfs_free_eofblocks+0xa2/0x1e0 but task is already holding lock: 00000000591c83ae (fs_reclaim){+.+.}, at: __fs_reclaim_acquire+0x5/0x30 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (fs_reclaim){+.+.}: kmem_cache_alloc+0x2c/0x2b0 radix_tree_node_alloc.constprop.19+0x3d/0xc0 __radix_tree_create+0x161/0x1c0 __radix_tree_insert+0x45/0x210 dmz_map+0x245/0x2d0 [dm_zoned] __map_bio+0x40/0x260 __split_and_process_non_flush+0x116/0x220 __split_and_process_bio+0x81/0x180 __dm_make_request.isra.32+0x5a/0x100 generic_make_request+0x36e/0x690 submit_bio+0x6c/0x140 mpage_readpages+0x19e/0x1f0 read_pages+0x6d/0x1b0 __do_page_cache_readahead+0x21b/0x2d0 force_page_cache_readahead+0xc4/0x100 generic_file_read_iter+0x7c6/0xd20 __vfs_read+0x102/0x180 vfs_read+0x9b/0x140 ksys_read+0x55/0xc0 do_syscall_64+0x5a/0x1f0 entry_SYSCALL_64_after_hwframe+0x49/0xbe -> #1 (&dmz->chunk_lock){+.+.}: dmz_map+0x133/0x2d0 [dm_zoned] __map_bio+0x40/0x260 __split_and_process_non_flush+0x116/0x220 __split_and_process_bio+0x81/0x180 __dm_make_request.isra.32+0x5a/0x100 generic_make_request+0x36e/0x690 submit_bio+0x6c/0x140 _xfs_buf_ioapply+0x31c/0x590 xfs_buf_submit_wait+0x73/0x520 xfs_buf_read_map+0x134/0x2f0 xfs_trans_read_buf_map+0xc3/0x580 xfs_read_agf+0xa5/0x1e0 xfs_alloc_read_agf+0x59/0x2b0 xfs_alloc_pagf_init+0x27/0x60 xfs_bmap_longest_free_extent+0x43/0xb0 xfs_bmap_btalloc_nullfb+0x7f/0xf0 xfs_bmap_btalloc+0x428/0x7c0 xfs_bmapi_write+0x598/0xcc0 xfs_iomap_write_allocate+0x15a/0x330 xfs_map_blocks+0x1cf/0x3f0 xfs_do_writepage+0x15f/0x7b0 write_cache_pages+0x1ca/0x540 xfs_vm_writepages+0x65/0xa0 do_writepages+0x48/0xf0 __writeback_single_inode+0x58/0x730 writeback_sb_inodes+0x249/0x5c0 wb_writeback+0x11e/0x550 wb_workfn+0xa3/0x670 process_one_work+0x228/0x670 worker_thread+0x3c/0x390 kthread+0x11c/0x140 ret_from_fork+0x3a/0x50 -> #0 (&xfs_nondir_ilock_class){++++}: down_read_nested+0x43/0x70 xfs_free_eofblocks+0xa2/0x1e0 xfs_fs_destroy_inode+0xac/0x270 dispose_list+0x51/0x80 prune_icache_sb+0x52/0x70 super_cache_scan+0x127/0x1a0 shrink_slab.part.47+0x1bd/0x590 shrink_node+0x3b5/0x470 balance_pgdat+0x158/0x3b0 kswapd+0x1ba/0x600 kthread+0x11c/0x140 ret_from_fork+0x3a/0x50 other info that might help us debug this: Chain exists of: &xfs_nondir_ilock_class --> &dmz->chunk_lock --> fs_reclaim Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(fs_reclaim); lock(&dmz->chunk_lock); lock(fs_reclaim); lock(&xfs_nondir_ilock_class); *** DEADLOCK *** 3 locks held by kswapd0/84: #0: 00000000591c83ae (fs_reclaim){+.+.}, at: __fs_reclaim_acquire+0x5/0x30 #1: 000000000f8208f5 (shrinker_rwsem){++++}, at: shrink_slab.part.47+0x3f/0x590 #2: 00000000cacefa54 (&type->s_umount_key#43){.+.+}, at: trylock_super+0x16/0x50 stack backtrace: CPU: 7 PID: 84 Comm: kswapd0 Not tainted 4.18.0-rc1 #62 Hardware name: Supermicro Super Server/X10SRL-F, BIOS 2.0 12/17/2015 Call Trace: dump_stack+0x85/0xcb print_circular_bug.isra.36+0x1ce/0x1db __lock_acquire+0x124e/0x1310 lock_acquire+0x9f/0x1f0 down_read_nested+0x43/0x70 xfs_free_eofblocks+0xa2/0x1e0 xfs_fs_destroy_inode+0xac/0x270 dispose_list+0x51/0x80 prune_icache_sb+0x52/0x70 super_cache_scan+0x127/0x1a0 shrink_slab.part.47+0x1bd/0x590 shrink_node+0x3b5/0x470 balance_pgdat+0x158/0x3b0 kswapd+0x1ba/0x600 kthread+0x11c/0x140 ret_from_fork+0x3a/0x50 Reported-by: Masato Suzuki Fixes: 4218a9554653 ("dm zoned: use GFP_NOIO in I/O path") Cc: Signed-off-by: Bart Van Assche Signed-off-by: Mike Snitzer --- drivers/md/dm-zoned-target.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/md/dm-zoned-target.c b/drivers/md/dm-zoned-target.c index 3c0e45f4dcf5..a44183ff4be0 100644 --- a/drivers/md/dm-zoned-target.c +++ b/drivers/md/dm-zoned-target.c @@ -787,7 +787,7 @@ static int dmz_ctr(struct dm_target *ti, unsigned int argc, char **argv) /* Chunk BIO work */ mutex_init(&dmz->chunk_lock); - INIT_RADIX_TREE(&dmz->chunk_rxtree, GFP_KERNEL); + INIT_RADIX_TREE(&dmz->chunk_rxtree, GFP_NOIO); dmz->chunk_wq = alloc_workqueue("dmz_cwq_%s", WQ_MEM_RECLAIM | WQ_UNBOUND, 0, dev->name); if (!dmz->chunk_wq) { -- cgit v1.2.3 From f2ccaa5904666f84d4e6958d6db9d1e65ead5085 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 22 Jun 2018 10:01:19 +0200 Subject: dm raid: don't use 'const' in function return A newly introduced function has 'const int' as the return type, but as "make W=1" reports, that has no meaning: drivers/md/dm-raid.c:510:18: error: type qualifiers ignored on function return type [-Werror=ignored-qualifiers] This changes the return type to plain 'int'. Signed-off-by: Arnd Bergmann Fixes: 33e53f06850f ("dm raid: introduce extended superblock and new raid types to support takeover/reshaping") Signed-off-by: Mike Snitzer Fixes: 552aa679f2657431 ("dm raid: use rs_is_raid*()") Signed-off-by: Geert Uytterhoeven Signed-off-by: Mike Snitzer --- drivers/md/dm-raid.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/md/dm-raid.c b/drivers/md/dm-raid.c index ab13fcec3fca..75df4c9d8b54 100644 --- a/drivers/md/dm-raid.c +++ b/drivers/md/dm-raid.c @@ -588,7 +588,7 @@ static const char *raid10_md_layout_to_format(int layout) } /* Return md raid10 algorithm for @name */ -static const int raid10_name_to_format(const char *name) +static int raid10_name_to_format(const char *name) { if (!strcasecmp(name, "near")) return ALGORITHM_RAID10_NEAR; -- cgit v1.2.3 From fe2a19652918a5247418aed48a247414a5e45fe2 Mon Sep 17 00:00:00 2001 From: Lyude Paul Date: Thu, 21 Jun 2018 16:48:26 -0400 Subject: drm/amdgpu: Count disabled CRTCs in commit tail earlier MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This fixes a regression I accidentally reduced that was picked up by kasan, where we were checking the CRTC atomic states after DRM's helpers had already freed them. Example: ================================================================== BUG: KASAN: use-after-free in amdgpu_dm_atomic_commit_tail.cold.50+0x13d/0x15a [amdgpu] Read of size 1 at addr ffff8803a697b071 by task kworker/u16:0/7 CPU: 7 PID: 7 Comm: kworker/u16:0 Tainted: G O 4.18.0-rc1Lyude-Upstream+ #1 Hardware name: HP HP ZBook 15 G4/8275, BIOS P70 Ver. 01.21 05/02/2018 Workqueue: events_unbound commit_work [drm_kms_helper] Call Trace: dump_stack+0xc1/0x169 ? dump_stack_print_info.cold.1+0x42/0x42 ? kmsg_dump_rewind_nolock+0xd9/0xd9 ? printk+0x9f/0xc5 ? amdgpu_dm_atomic_commit_tail.cold.50+0x13d/0x15a [amdgpu] print_address_description+0x6c/0x23c ? amdgpu_dm_atomic_commit_tail.cold.50+0x13d/0x15a [amdgpu] kasan_report.cold.6+0x241/0x2fd amdgpu_dm_atomic_commit_tail.cold.50+0x13d/0x15a [amdgpu] ? commit_planes_to_stream.constprop.45+0x13b0/0x13b0 [amdgpu] ? cpu_load_update_active+0x290/0x290 ? finish_task_switch+0x2bd/0x840 ? __switch_to_asm+0x34/0x70 ? read_word_at_a_time+0xe/0x20 ? strscpy+0x14b/0x460 ? drm_atomic_helper_wait_for_dependencies+0x47d/0x7e0 [drm_kms_helper] commit_tail+0x96/0xe0 [drm_kms_helper] process_one_work+0x88a/0x1360 ? create_worker+0x540/0x540 ? __sched_text_start+0x8/0x8 ? move_queued_task+0x760/0x760 ? call_rcu_sched+0x20/0x20 ? vsnprintf+0xcda/0x1350 ? wait_woken+0x1c0/0x1c0 ? mutex_unlock+0x1d/0x40 ? init_timer_key+0x190/0x230 ? schedule+0xea/0x390 ? __schedule+0x1ea0/0x1ea0 ? need_to_create_worker+0xe4/0x210 ? init_worker_pool+0x700/0x700 ? try_to_del_timer_sync+0xbf/0x110 ? del_timer+0x120/0x120 ? __mutex_lock_slowpath+0x10/0x10 worker_thread+0x196/0x11f0 ? flush_rcu_work+0x50/0x50 ? __switch_to_asm+0x34/0x70 ? __switch_to_asm+0x34/0x70 ? __switch_to_asm+0x40/0x70 ? __switch_to_asm+0x34/0x70 ? __switch_to_asm+0x40/0x70 ? __switch_to_asm+0x34/0x70 ? __switch_to_asm+0x40/0x70 ? __schedule+0x7d6/0x1ea0 ? migrate_swap_stop+0x850/0x880 ? __sched_text_start+0x8/0x8 ? save_stack+0x8c/0xb0 ? kasan_kmalloc+0xbf/0xe0 ? kmem_cache_alloc_trace+0xe4/0x190 ? kthread+0x98/0x390 ? ret_from_fork+0x35/0x40 ? ret_from_fork+0x35/0x40 ? deactivate_slab.isra.67+0x3c4/0x5c0 ? kthread+0x98/0x390 ? kthread+0x98/0x390 ? set_track+0x76/0x120 ? schedule+0xea/0x390 ? __schedule+0x1ea0/0x1ea0 ? wait_woken+0x1c0/0x1c0 ? kasan_unpoison_shadow+0x30/0x40 ? parse_args.cold.15+0x17a/0x17a ? flush_rcu_work+0x50/0x50 kthread+0x2d4/0x390 ? kthread_create_worker_on_cpu+0xc0/0xc0 ret_from_fork+0x35/0x40 Allocated by task 1124: kasan_kmalloc+0xbf/0xe0 kmem_cache_alloc_trace+0xe4/0x190 dm_crtc_duplicate_state+0x78/0x130 [amdgpu] drm_atomic_get_crtc_state+0x147/0x410 [drm] page_flip_common+0x57/0x230 [drm_kms_helper] drm_atomic_helper_page_flip+0xa6/0x110 [drm_kms_helper] drm_mode_page_flip_ioctl+0xc4b/0x10a0 [drm] drm_ioctl_kernel+0x1d4/0x260 [drm] drm_ioctl+0x433/0x920 [drm] amdgpu_drm_ioctl+0x11d/0x290 [amdgpu] do_vfs_ioctl+0x1a1/0x13d0 ksys_ioctl+0x60/0x90 __x64_sys_ioctl+0x6f/0xb0 do_syscall_64+0x147/0x440 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Freed by task 1124: __kasan_slab_free+0x12e/0x180 kfree+0x92/0x1a0 drm_atomic_state_default_clear+0x315/0xc40 [drm] __drm_atomic_state_free+0x35/0xd0 [drm] drm_atomic_helper_update_plane+0xac/0x350 [drm_kms_helper] __setplane_internal+0x2d6/0x840 [drm] drm_mode_cursor_universal+0x41e/0xbe0 [drm] drm_mode_cursor_common+0x49f/0x880 [drm] drm_mode_cursor_ioctl+0xd8/0x130 [drm] drm_ioctl_kernel+0x1d4/0x260 [drm] drm_ioctl+0x433/0x920 [drm] amdgpu_drm_ioctl+0x11d/0x290 [amdgpu] do_vfs_ioctl+0x1a1/0x13d0 ksys_ioctl+0x60/0x90 __x64_sys_ioctl+0x6f/0xb0 do_syscall_64+0x147/0x440 entry_SYSCALL_64_after_hwframe+0x44/0xa9 The buggy address belongs to the object at ffff8803a697b068 which belongs to the cache kmalloc-1024 of size 1024 The buggy address is located 9 bytes inside of 1024-byte region [ffff8803a697b068, ffff8803a697b468) The buggy address belongs to the page: page:ffffea000e9a5e00 count:1 mapcount:0 mapping:ffff88041e00efc0 index:0x0 compound_mapcount: 0 flags: 0x8000000000008100(slab|head) raw: 8000000000008100 ffffea000ecbc208 ffff88041e000c70 ffff88041e00efc0 raw: 0000000000000000 0000000000170017 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8803a697af00: fb fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff8803a697af80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff8803a697b000: fc fc fc fc fc fc fc fc fc fc fc fc fc fb fb fb ^ ffff8803a697b080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8803a697b100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== So, we fix this by counting the number of CRTCs this atomic commit disabled early on in the function before their atomic states have been freed, then use that count later to do the appropriate number of RPM puts at the end of the function. Acked-by: Michel Dänzer Reviewed-by: Harry Wentland Cc: stable@vger.kernel.org Fixes: 97028037a38ae ("drm/amdgpu: Grab/put runtime PM references in atomic_commit_tail()") Signed-off-by: Lyude Paul Cc: Michel Dänzer Reported-by: Michel Dänzer Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c index f9add85157e7..689dbdf44bbf 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -4206,6 +4206,7 @@ static void amdgpu_dm_atomic_commit_tail(struct drm_atomic_state *state) struct drm_connector *connector; struct drm_connector_state *old_con_state, *new_con_state; struct dm_crtc_state *dm_old_crtc_state, *dm_new_crtc_state; + int crtc_disable_count = 0; drm_atomic_helper_update_legacy_modeset_state(dev, state); @@ -4410,6 +4411,9 @@ static void amdgpu_dm_atomic_commit_tail(struct drm_atomic_state *state) struct amdgpu_crtc *acrtc = to_amdgpu_crtc(crtc); bool modeset_needed; + if (old_crtc_state->active && !new_crtc_state->active) + crtc_disable_count++; + dm_new_crtc_state = to_dm_crtc_state(new_crtc_state); dm_old_crtc_state = to_dm_crtc_state(old_crtc_state); modeset_needed = modeset_required( @@ -4463,11 +4467,9 @@ static void amdgpu_dm_atomic_commit_tail(struct drm_atomic_state *state) * so we can put the GPU into runtime suspend if we're not driving any * displays anymore */ + for (i = 0; i < crtc_disable_count; i++) + pm_runtime_put_autosuspend(dev->dev); pm_runtime_mark_last_busy(dev->dev); - for_each_oldnew_crtc_in_state(state, crtc, old_crtc_state, new_crtc_state, i) { - if (old_crtc_state->active && !new_crtc_state->active) - pm_runtime_put_autosuspend(dev->dev); - } } -- cgit v1.2.3 From 38e624a18f9a05b8c894409be6b14709a7206c7c Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Michel=20D=C3=A4nzer?= Date: Thu, 21 Jun 2018 11:27:46 +0200 Subject: drm/amdgpu: GPU vs CPU page size fixes in amdgpu_vm_bo_split_mapping MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit start / last / max_entries are numbers of GPU pages, pfn / count are numbers of CPU pages. Convert between them accordingly. Fixes badness on systems with > 4K page size. Cc: stable@vger.kernel.org Bugzilla: https://bugs.freedesktop.org/106258 Reported-by: Matt Corallo Tested-by: foxbat@ruin.net Reviewed-by: Alex Deucher Reviewed-by: Christian König Signed-off-by: Michel Dänzer Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c index b0eb2f537392..edf16b2b957a 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c @@ -1463,7 +1463,9 @@ static int amdgpu_vm_bo_split_mapping(struct amdgpu_device *adev, uint64_t count; max_entries = min(max_entries, 16ull * 1024ull); - for (count = 1; count < max_entries; ++count) { + for (count = 1; + count < max_entries / (PAGE_SIZE / AMDGPU_GPU_PAGE_SIZE); + ++count) { uint64_t idx = pfn + count; if (pages_addr[idx] != @@ -1476,7 +1478,7 @@ static int amdgpu_vm_bo_split_mapping(struct amdgpu_device *adev, dma_addr = pages_addr; } else { addr = pages_addr[pfn]; - max_entries = count; + max_entries = count * (PAGE_SIZE / AMDGPU_GPU_PAGE_SIZE); } } else if (flags & AMDGPU_PTE_VALID) { @@ -1491,7 +1493,7 @@ static int amdgpu_vm_bo_split_mapping(struct amdgpu_device *adev, if (r) return r; - pfn += last - start + 1; + pfn += (last - start + 1) / (PAGE_SIZE / AMDGPU_GPU_PAGE_SIZE); if (nodes && nodes->size == pfn) { pfn = 0; ++nodes; -- cgit v1.2.3 From 7b4e88434c4e7982fb053c49657e1c8bbb8692d9 Mon Sep 17 00:00:00 2001 From: Casey Schaufler Date: Fri, 22 Jun 2018 10:54:45 -0700 Subject: Smack: Mark inode instant in smack_task_to_inode Smack: Mark inode instant in smack_task_to_inode /proc clean-up in commit 1bbc55131e59bd099fdc568d3aa0b42634dbd188 resulted in smack_task_to_inode() being called before smack_d_instantiate. This resulted in the smk_inode value being ignored, even while present for files in /proc/self. Marking the inode as instant here fixes that. Signed-off-by: Casey Schaufler Signed-off-by: James Morris --- security/smack/smack_lsm.c | 1 + 1 file changed, 1 insertion(+) diff --git a/security/smack/smack_lsm.c b/security/smack/smack_lsm.c index 7ad226018f51..19de675d4504 100644 --- a/security/smack/smack_lsm.c +++ b/security/smack/smack_lsm.c @@ -2296,6 +2296,7 @@ static void smack_task_to_inode(struct task_struct *p, struct inode *inode) struct smack_known *skp = smk_of_task_struct(p); isp->smk_inode = skp; + isp->smk_flags |= SMK_INODE_INSTANT; } /* -- cgit v1.2.3 From 1ebb2709ba39bf291a30dc1fcf937f46c4675f4d Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Tue, 12 Jun 2018 15:48:06 +0100 Subject: arm64: dts: apq8096-db820c: disable uart0 by default Access to UART0 is disabled by bootloaders. By leaving it enabled by default would reboot the board. Disable this for now, this would alteast give a board which boots. Signed-off-by: Srinivas Kandagatla Reviewed-by: Bjorn Andersson Signed-off-by: Andy Gross --- arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi index 0f829db33efe..4d5ef01f43a3 100644 --- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi @@ -75,7 +75,7 @@ serial@75b1000 { label = "LS-UART0"; - status = "okay"; + status = "disabled"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&blsp2_uart2_4pins_default>; pinctrl-1 = <&blsp2_uart2_4pins_sleep>; -- cgit v1.2.3 From 6b4154a655a258c67bcfabbd4c3a06637e74ebcd Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Tue, 8 May 2018 10:09:51 -0500 Subject: arm64: dts: msm8916: fix Coresight ETF graph connections The ETF input should be connected to the funnel output, and the ETF output should be connected to the replicator input. The labels are wrong and these got swapped: Warning (graph_endpoint): /soc/funnel@821000/ports/port@8/endpoint: graph connection to node '/soc/etf@825000/ports/port@1/endpoint' is not bidirectional Warning (graph_endpoint): /soc/replicator@824000/ports/port@2/endpoint: graph connection to node '/soc/etf@825000/ports/port@0/endpoint' is not bidirectional Fixes: 7c10da373698 ("arm64: dts: qcom: Add msm8916 CoreSight components") Cc: Ivan T. Ivanov Cc: Mathieu Poirier Cc: Andy Gross Cc: David Brown Cc: linux-arm-msm@vger.kernel.org Signed-off-by: Rob Herring Reviewed-by: Mathieu Poirier Tested-by: Mathieu Poirier Signed-off-by: Andy Gross --- arch/arm64/boot/dts/qcom/msm8916.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index 650f356f69ca..c2625d15a8c0 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -1191,14 +1191,14 @@ port@0 { reg = <0>; - etf_out: endpoint { + etf_in: endpoint { slave-mode; remote-endpoint = <&funnel0_out>; }; }; port@1 { reg = <0>; - etf_in: endpoint { + etf_out: endpoint { remote-endpoint = <&replicator_in>; }; }; -- cgit v1.2.3 From b2f82565f2caa1a5c1a26e68593eaef355fae3f4 Mon Sep 17 00:00:00 2001 From: Breno Leitao Date: Wed, 20 Jun 2018 16:35:16 -0300 Subject: powerpc: Wire up io_pgetevents Wire up io_pgetevents system call on powerpc. io_pgetevents is a new syscall to read asynchronous I/O events from the completion queue. Tested with libaio branch aio-poll[1] and the io_pgetevents test (#22) passed on both ppc64 LE and BE modes. [1] https://pagure.io/libaio/branch/aio-poll CC: Christoph Hellwig Signed-off-by: Breno Leitao Acked-by: Christoph Hellwig Signed-off-by: Michael Ellerman --- arch/powerpc/include/asm/systbl.h | 1 + arch/powerpc/include/asm/unistd.h | 2 +- arch/powerpc/include/uapi/asm/unistd.h | 1 + 3 files changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/powerpc/include/asm/systbl.h b/arch/powerpc/include/asm/systbl.h index cfcf6a874cfa..01b5171ea189 100644 --- a/arch/powerpc/include/asm/systbl.h +++ b/arch/powerpc/include/asm/systbl.h @@ -393,3 +393,4 @@ SYSCALL(pkey_alloc) SYSCALL(pkey_free) SYSCALL(pkey_mprotect) SYSCALL(rseq) +COMPAT_SYS(io_pgetevents) diff --git a/arch/powerpc/include/asm/unistd.h b/arch/powerpc/include/asm/unistd.h index 1e9708632dce..c19379f0a32e 100644 --- a/arch/powerpc/include/asm/unistd.h +++ b/arch/powerpc/include/asm/unistd.h @@ -12,7 +12,7 @@ #include -#define NR_syscalls 388 +#define NR_syscalls 389 #define __NR__exit __NR_exit diff --git a/arch/powerpc/include/uapi/asm/unistd.h b/arch/powerpc/include/uapi/asm/unistd.h index ac5ba55066dd..985534d0b448 100644 --- a/arch/powerpc/include/uapi/asm/unistd.h +++ b/arch/powerpc/include/uapi/asm/unistd.h @@ -399,5 +399,6 @@ #define __NR_pkey_free 385 #define __NR_pkey_mprotect 386 #define __NR_rseq 387 +#define __NR_io_pgetevents 388 #endif /* _UAPI_ASM_POWERPC_UNISTD_H_ */ -- cgit v1.2.3 From c432c08805963f9b145b86b5f4ac945881e1b9df Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Sat, 23 Jun 2018 10:24:23 -0700 Subject: arm64: defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson --- arch/arm64/configs/defconfig | 102 +++++++++++++++++-------------------------- 1 file changed, 39 insertions(+), 63 deletions(-) diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index 3cfa8ca26738..f9a186f6af8a 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -47,6 +47,7 @@ CONFIG_ARCH_MVEBU=y CONFIG_ARCH_QCOM=y CONFIG_ARCH_ROCKCHIP=y CONFIG_ARCH_SEATTLE=y +CONFIG_ARCH_SYNQUACER=y CONFIG_ARCH_RENESAS=y CONFIG_ARCH_R8A7795=y CONFIG_ARCH_R8A7796=y @@ -58,7 +59,6 @@ CONFIG_ARCH_R8A77995=y CONFIG_ARCH_STRATIX10=y CONFIG_ARCH_TEGRA=y CONFIG_ARCH_SPRD=y -CONFIG_ARCH_SYNQUACER=y CONFIG_ARCH_THUNDER=y CONFIG_ARCH_THUNDER2=y CONFIG_ARCH_UNIPHIER=y @@ -67,25 +67,23 @@ CONFIG_ARCH_XGENE=y CONFIG_ARCH_ZX=y CONFIG_ARCH_ZYNQMP=y CONFIG_PCI=y -CONFIG_HOTPLUG_PCI_PCIE=y CONFIG_PCI_IOV=y CONFIG_HOTPLUG_PCI=y CONFIG_HOTPLUG_PCI_ACPI=y -CONFIG_PCI_LAYERSCAPE=y -CONFIG_PCI_HISI=y -CONFIG_PCIE_QCOM=y -CONFIG_PCIE_KIRIN=y -CONFIG_PCIE_ARMADA_8K=y -CONFIG_PCIE_HISI_STB=y CONFIG_PCI_AARDVARK=y CONFIG_PCI_TEGRA=y CONFIG_PCIE_RCAR=y -CONFIG_PCIE_ROCKCHIP=y -CONFIG_PCIE_ROCKCHIP_HOST=m CONFIG_PCI_HOST_GENERIC=y CONFIG_PCI_XGENE=y CONFIG_PCI_HOST_THUNDER_PEM=y CONFIG_PCI_HOST_THUNDER_ECAM=y +CONFIG_PCIE_ROCKCHIP_HOST=m +CONFIG_PCI_LAYERSCAPE=y +CONFIG_PCI_HISI=y +CONFIG_PCIE_QCOM=y +CONFIG_PCIE_ARMADA_8K=y +CONFIG_PCIE_KIRIN=y +CONFIG_PCIE_HISI_STB=y CONFIG_ARM64_VA_BITS_48=y CONFIG_SCHED_MC=y CONFIG_NUMA=y @@ -104,8 +102,6 @@ CONFIG_HIBERNATION=y CONFIG_WQ_POWER_EFFICIENT_DEFAULT=y CONFIG_ARM_CPUIDLE=y CONFIG_CPU_FREQ=y -CONFIG_CPU_FREQ_GOV_ATTR_SET=y -CONFIG_CPU_FREQ_GOV_COMMON=y CONFIG_CPU_FREQ_STAT=y CONFIG_CPU_FREQ_GOV_POWERSAVE=m CONFIG_CPU_FREQ_GOV_USERSPACE=y @@ -113,11 +109,11 @@ CONFIG_CPU_FREQ_GOV_ONDEMAND=y CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y CONFIG_CPUFREQ_DT=y +CONFIG_ACPI_CPPC_CPUFREQ=m CONFIG_ARM_ARMADA_37XX_CPUFREQ=y CONFIG_ARM_BIG_LITTLE_CPUFREQ=y CONFIG_ARM_SCPI_CPUFREQ=y CONFIG_ARM_TEGRA186_CPUFREQ=y -CONFIG_ACPI_CPPC_CPUFREQ=m CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -236,11 +232,6 @@ CONFIG_SMSC911X=y CONFIG_SNI_AVE=y CONFIG_SNI_NETSEC=y CONFIG_STMMAC_ETH=m -CONFIG_DWMAC_IPQ806X=m -CONFIG_DWMAC_MESON=m -CONFIG_DWMAC_ROCKCHIP=m -CONFIG_DWMAC_SUNXI=m -CONFIG_DWMAC_SUN8I=m CONFIG_MDIO_BUS_MUX_MMIOREG=y CONFIG_AT803X_PHY=m CONFIG_MARVELL_PHY=m @@ -269,8 +260,8 @@ CONFIG_WL18XX=m CONFIG_WLCORE_SDIO=m CONFIG_INPUT_EVDEV=y CONFIG_KEYBOARD_ADC=m -CONFIG_KEYBOARD_CROS_EC=y CONFIG_KEYBOARD_GPIO=y +CONFIG_KEYBOARD_CROS_EC=y CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_ATMEL_MXT=m CONFIG_INPUT_MISC=y @@ -296,17 +287,13 @@ CONFIG_SERIAL_SAMSUNG=y CONFIG_SERIAL_SAMSUNG_CONSOLE=y CONFIG_SERIAL_TEGRA=y CONFIG_SERIAL_SH_SCI=y -CONFIG_SERIAL_SH_SCI_NR_UARTS=11 -CONFIG_SERIAL_SH_SCI_CONSOLE=y CONFIG_SERIAL_MSM=y CONFIG_SERIAL_MSM_CONSOLE=y CONFIG_SERIAL_XILINX_PS_UART=y CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y CONFIG_SERIAL_MVEBU_UART=y CONFIG_SERIAL_DEV_BUS=y -CONFIG_SERIAL_DEV_CTRL_TTYPORT=y CONFIG_VIRTIO_CONSOLE=y -CONFIG_I2C_HID=m CONFIG_I2C_CHARDEV=y CONFIG_I2C_MUX=y CONFIG_I2C_MUX_PCA954x=y @@ -325,26 +312,26 @@ CONFIG_I2C_RCAR=y CONFIG_I2C_CROS_EC_TUNNEL=y CONFIG_SPI=y CONFIG_SPI_ARMADA_3700=y -CONFIG_SPI_MESON_SPICC=m -CONFIG_SPI_MESON_SPIFC=m CONFIG_SPI_BCM2835=m CONFIG_SPI_BCM2835AUX=m +CONFIG_SPI_MESON_SPICC=m +CONFIG_SPI_MESON_SPIFC=m CONFIG_SPI_ORION=y CONFIG_SPI_PL022=y -CONFIG_SPI_QUP=y CONFIG_SPI_ROCKCHIP=y +CONFIG_SPI_QUP=y CONFIG_SPI_S3C64XX=y CONFIG_SPI_SPIDEV=m CONFIG_SPMI=y -CONFIG_PINCTRL_IPQ8074=y CONFIG_PINCTRL_SINGLE=y CONFIG_PINCTRL_MAX77620=y +CONFIG_PINCTRL_IPQ8074=y CONFIG_PINCTRL_MSM8916=y CONFIG_PINCTRL_MSM8994=y CONFIG_PINCTRL_MSM8996=y -CONFIG_PINCTRL_MT7622=y CONFIG_PINCTRL_QDF2XXX=y CONFIG_PINCTRL_QCOM_SPMI_PMIC=y +CONFIG_PINCTRL_MT7622=y CONFIG_GPIO_DWAPB=y CONFIG_GPIO_MB86S7X=y CONFIG_GPIO_PL061=y @@ -368,13 +355,13 @@ CONFIG_SENSORS_INA2XX=m CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y CONFIG_CPU_THERMAL=y CONFIG_THERMAL_EMULATION=y +CONFIG_ROCKCHIP_THERMAL=m +CONFIG_RCAR_GEN3_THERMAL=y CONFIG_ARMADA_THERMAL=y CONFIG_BRCMSTB_THERMAL=m CONFIG_EXYNOS_THERMAL=y -CONFIG_RCAR_GEN3_THERMAL=y -CONFIG_QCOM_TSENS=y -CONFIG_ROCKCHIP_THERMAL=m CONFIG_TEGRA_BPMP_THERMAL=m +CONFIG_QCOM_TSENS=y CONFIG_UNIPHIER_THERMAL=y CONFIG_WATCHDOG=y CONFIG_S3C2410_WATCHDOG=y @@ -395,9 +382,9 @@ CONFIG_MFD_MAX77620=y CONFIG_MFD_SPMI_PMIC=y CONFIG_MFD_RK808=y CONFIG_MFD_SEC_CORE=y +CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_AXP20X=y CONFIG_REGULATOR_FAN53555=y -CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_GPIO=y CONFIG_REGULATOR_HI6421V530=y CONFIG_REGULATOR_HI655X=y @@ -407,16 +394,15 @@ CONFIG_REGULATOR_QCOM_SMD_RPM=y CONFIG_REGULATOR_QCOM_SPMI=y CONFIG_REGULATOR_RK808=y CONFIG_REGULATOR_S2MPS11=y +CONFIG_RC_CORE=m +CONFIG_RC_DECODERS=y +CONFIG_RC_DEVICES=y +CONFIG_IR_MESON=m CONFIG_MEDIA_SUPPORT=m CONFIG_MEDIA_CAMERA_SUPPORT=y CONFIG_MEDIA_ANALOG_TV_SUPPORT=y CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y CONFIG_MEDIA_CONTROLLER=y -CONFIG_MEDIA_RC_SUPPORT=y -CONFIG_RC_CORE=m -CONFIG_RC_DEVICES=y -CONFIG_RC_DECODERS=y -CONFIG_IR_MESON=m CONFIG_VIDEO_V4L2_SUBDEV_API=y # CONFIG_DVB_NET is not set CONFIG_V4L_MEM2MEM_DRIVERS=y @@ -441,8 +427,7 @@ CONFIG_ROCKCHIP_DW_HDMI=y CONFIG_ROCKCHIP_DW_MIPI_DSI=y CONFIG_ROCKCHIP_INNO_HDMI=y CONFIG_DRM_RCAR_DU=m -CONFIG_DRM_RCAR_LVDS=y -CONFIG_DRM_RCAR_VSP=y +CONFIG_DRM_RCAR_LVDS=m CONFIG_DRM_TEGRA=m CONFIG_DRM_PANEL_SIMPLE=m CONFIG_DRM_I2C_ADV7511=m @@ -455,7 +440,6 @@ CONFIG_FB_ARMCLCD=y CONFIG_BACKLIGHT_GENERIC=m CONFIG_BACKLIGHT_PWM=m CONFIG_BACKLIGHT_LP855X=m -CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_LOGO=y # CONFIG_LOGO_LINUX_MONO is not set # CONFIG_LOGO_LINUX_VGA16 is not set @@ -468,6 +452,7 @@ CONFIG_SND_SOC_RCAR=m CONFIG_SND_SOC_AK4613=m CONFIG_SND_SIMPLE_CARD=m CONFIG_SND_AUDIO_GRAPH_CARD=m +CONFIG_I2C_HID=m CONFIG_USB=y CONFIG_USB_OTG=y CONFIG_USB_XHCI_HCD=y @@ -501,12 +486,12 @@ CONFIG_MMC_BLOCK_MINORS=32 CONFIG_MMC_ARMMMCI=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ACPI=y -CONFIG_MMC_SDHCI_F_SDH30=y CONFIG_MMC_SDHCI_PLTFM=y CONFIG_MMC_SDHCI_OF_ARASAN=y CONFIG_MMC_SDHCI_OF_ESDHC=y CONFIG_MMC_SDHCI_CADENCE=y CONFIG_MMC_SDHCI_TEGRA=y +CONFIG_MMC_SDHCI_F_SDH30=y CONFIG_MMC_MESON_GX=y CONFIG_MMC_SDHCI_MSM=y CONFIG_MMC_SPI=y @@ -524,11 +509,11 @@ CONFIG_LEDS_CLASS=y CONFIG_LEDS_GPIO=y CONFIG_LEDS_PWM=y CONFIG_LEDS_SYSCON=y +CONFIG_LEDS_TRIGGER_DISK=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_LEDS_TRIGGER_CPU=y CONFIG_LEDS_TRIGGER_DEFAULT_ON=y CONFIG_LEDS_TRIGGER_PANIC=y -CONFIG_LEDS_TRIGGER_DISK=y CONFIG_EDAC=y CONFIG_EDAC_GHES=y CONFIG_RTC_CLASS=y @@ -537,13 +522,13 @@ CONFIG_RTC_DRV_RK808=m CONFIG_RTC_DRV_S5M=y CONFIG_RTC_DRV_DS3232=y CONFIG_RTC_DRV_EFI=y +CONFIG_RTC_DRV_CROS_EC=y CONFIG_RTC_DRV_S3C=y CONFIG_RTC_DRV_PL031=y CONFIG_RTC_DRV_SUN6I=y CONFIG_RTC_DRV_ARMADA38X=y CONFIG_RTC_DRV_TEGRA=y CONFIG_RTC_DRV_XGENE=y -CONFIG_RTC_DRV_CROS_EC=y CONFIG_DMADEVICES=y CONFIG_DMA_BCM2835=m CONFIG_K3_DMA=y @@ -579,7 +564,6 @@ CONFIG_HWSPINLOCK_QCOM=y CONFIG_ARM_MHU=y CONFIG_PLATFORM_MHU=y CONFIG_BCM2835_MBOX=y -CONFIG_HI6220_MBOX=y CONFIG_QCOM_APCS_IPC=y CONFIG_ROCKCHIP_IOMMU=y CONFIG_TEGRA_IOMMU_SMMU=y @@ -602,7 +586,6 @@ CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y CONFIG_EXTCON_USB_GPIO=y CONFIG_EXTCON_USBC_CROS_EC=y CONFIG_MEMORY=y -CONFIG_TEGRA_MC=y CONFIG_IIO=y CONFIG_EXYNOS_ADC=y CONFIG_ROCKCHIP_SARADC=m @@ -618,27 +601,27 @@ CONFIG_PWM_RCAR=m CONFIG_PWM_ROCKCHIP=y CONFIG_PWM_SAMSUNG=y CONFIG_PWM_TEGRA=m +CONFIG_PHY_XGENE=y +CONFIG_PHY_SUN4I_USB=y +CONFIG_PHY_HI6220_USB=y CONFIG_PHY_HISTB_COMBPHY=y CONFIG_PHY_HISI_INNO_USB2=y -CONFIG_PHY_RCAR_GEN3_USB2=y -CONFIG_PHY_RCAR_GEN3_USB3=m -CONFIG_PHY_HI6220_USB=y -CONFIG_PHY_QCOM_USB_HS=y -CONFIG_PHY_SUN4I_USB=y CONFIG_PHY_MVEBU_CP110_COMPHY=y CONFIG_PHY_QCOM_QMP=m -CONFIG_PHY_ROCKCHIP_INNO_USB2=y +CONFIG_PHY_QCOM_USB_HS=y +CONFIG_PHY_RCAR_GEN3_USB2=y +CONFIG_PHY_RCAR_GEN3_USB3=m CONFIG_PHY_ROCKCHIP_EMMC=y +CONFIG_PHY_ROCKCHIP_INNO_USB2=y CONFIG_PHY_ROCKCHIP_PCIE=m CONFIG_PHY_ROCKCHIP_TYPEC=y -CONFIG_PHY_XGENE=y CONFIG_PHY_TEGRA_XUSB=y CONFIG_QCOM_L2_PMU=y CONFIG_QCOM_L3_PMU=y -CONFIG_MESON_EFUSE=m CONFIG_QCOM_QFPROM=y CONFIG_ROCKCHIP_EFUSE=y CONFIG_UNIPHIER_EFUSE=y +CONFIG_MESON_EFUSE=m CONFIG_TEE=y CONFIG_OPTEE=y CONFIG_ARM_SCPI_PROTOCOL=y @@ -647,7 +630,6 @@ CONFIG_EFI_CAPSULE_LOADER=y CONFIG_ACPI=y CONFIG_ACPI_APEI=y CONFIG_ACPI_APEI_GHES=y -CONFIG_ACPI_APEI_PCIEAER=y CONFIG_ACPI_APEI_MEMORY_FAILURE=y CONFIG_ACPI_APEI_EINJ=y CONFIG_EXT2_FS=y @@ -682,7 +664,6 @@ CONFIG_DEBUG_INFO=y CONFIG_DEBUG_FS=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y -CONFIG_LOCKUP_DETECTOR=y # CONFIG_SCHED_DEBUG is not set # CONFIG_DEBUG_PREEMPT is not set # CONFIG_FTRACE is not set @@ -691,20 +672,15 @@ CONFIG_SECURITY=y CONFIG_CRYPTO_ECHAINIV=y CONFIG_CRYPTO_ANSI_CPRNG=y CONFIG_ARM64_CRYPTO=y -CONFIG_CRYPTO_SHA256_ARM64=m -CONFIG_CRYPTO_SHA512_ARM64=m CONFIG_CRYPTO_SHA1_ARM64_CE=y CONFIG_CRYPTO_SHA2_ARM64_CE=y +CONFIG_CRYPTO_SHA512_ARM64_CE=m +CONFIG_CRYPTO_SHA3_ARM64=m +CONFIG_CRYPTO_SM3_ARM64_CE=m CONFIG_CRYPTO_GHASH_ARM64_CE=y CONFIG_CRYPTO_CRCT10DIF_ARM64_CE=m CONFIG_CRYPTO_CRC32_ARM64_CE=m -CONFIG_CRYPTO_AES_ARM64=m -CONFIG_CRYPTO_AES_ARM64_CE=m CONFIG_CRYPTO_AES_ARM64_CE_CCM=y CONFIG_CRYPTO_AES_ARM64_CE_BLK=y -CONFIG_CRYPTO_AES_ARM64_NEON_BLK=m CONFIG_CRYPTO_CHACHA20_NEON=m CONFIG_CRYPTO_AES_ARM64_BS=m -CONFIG_CRYPTO_SHA512_ARM64_CE=m -CONFIG_CRYPTO_SHA3_ARM64=m -CONFIG_CRYPTO_SM3_ARM64_CE=m -- cgit v1.2.3 From fd7d58f0dbc3e3c6d68d4a3dccabfe1e52a23345 Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Sat, 23 Jun 2018 10:24:23 -0700 Subject: ARM: multi_v7_defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson --- arch/arm/configs/multi_v7_defconfig | 378 +++++++++++++++--------------------- 1 file changed, 155 insertions(+), 223 deletions(-) diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index 7e1c543162c3..8f6be1982545 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -1,5 +1,4 @@ CONFIG_SYSVIPC=y -CONFIG_FHANDLE=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_CGROUPS=y @@ -10,20 +9,10 @@ CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_PARTITION_ADVANCED=y CONFIG_CMDLINE_PARTITION=y -CONFIG_ARCH_MULTI_V7=y -# CONFIG_ARCH_MULTI_V5 is not set -# CONFIG_ARCH_MULTI_V4 is not set CONFIG_ARCH_VIRT=y CONFIG_ARCH_ALPINE=y CONFIG_ARCH_ARTPEC=y CONFIG_MACH_ARTPEC6=y -CONFIG_ARCH_MVEBU=y -CONFIG_MACH_ARMADA_370=y -CONFIG_MACH_ARMADA_375=y -CONFIG_MACH_ARMADA_38X=y -CONFIG_MACH_ARMADA_39X=y -CONFIG_MACH_ARMADA_XP=y -CONFIG_MACH_DOVE=y CONFIG_ARCH_AT91=y CONFIG_SOC_SAMA5D2=y CONFIG_SOC_SAMA5D3=y @@ -32,9 +21,9 @@ CONFIG_ARCH_BCM=y CONFIG_ARCH_BCM_CYGNUS=y CONFIG_ARCH_BCM_HR2=y CONFIG_ARCH_BCM_NSP=y -CONFIG_ARCH_BCM_21664=y -CONFIG_ARCH_BCM_281XX=y CONFIG_ARCH_BCM_5301X=y +CONFIG_ARCH_BCM_281XX=y +CONFIG_ARCH_BCM_21664=y CONFIG_ARCH_BCM2835=y CONFIG_ARCH_BCM_63XX=y CONFIG_ARCH_BRCMSTB=y @@ -43,14 +32,14 @@ CONFIG_MACH_BERLIN_BG2=y CONFIG_MACH_BERLIN_BG2CD=y CONFIG_MACH_BERLIN_BG2Q=y CONFIG_ARCH_DIGICOLOR=y +CONFIG_ARCH_EXYNOS=y +CONFIG_EXYNOS5420_MCPM=y CONFIG_ARCH_HIGHBANK=y CONFIG_ARCH_HISI=y CONFIG_ARCH_HI3xxx=y -CONFIG_ARCH_HIX5HD2=y CONFIG_ARCH_HIP01=y CONFIG_ARCH_HIP04=y -CONFIG_ARCH_KEYSTONE=y -CONFIG_ARCH_MESON=y +CONFIG_ARCH_HIX5HD2=y CONFIG_ARCH_MXC=y CONFIG_SOC_IMX50=y CONFIG_SOC_IMX51=y @@ -60,29 +49,30 @@ CONFIG_SOC_IMX6SL=y CONFIG_SOC_IMX6SX=y CONFIG_SOC_IMX6UL=y CONFIG_SOC_IMX7D=y -CONFIG_SOC_VF610=y CONFIG_SOC_LS1021A=y +CONFIG_SOC_VF610=y +CONFIG_ARCH_KEYSTONE=y +CONFIG_ARCH_MEDIATEK=y +CONFIG_ARCH_MESON=y +CONFIG_ARCH_MVEBU=y +CONFIG_MACH_ARMADA_370=y +CONFIG_MACH_ARMADA_375=y +CONFIG_MACH_ARMADA_38X=y +CONFIG_MACH_ARMADA_39X=y +CONFIG_MACH_ARMADA_XP=y +CONFIG_MACH_DOVE=y CONFIG_ARCH_OMAP3=y CONFIG_ARCH_OMAP4=y CONFIG_SOC_OMAP5=y CONFIG_SOC_AM33XX=y CONFIG_SOC_AM43XX=y CONFIG_SOC_DRA7XX=y +CONFIG_ARCH_SIRF=y CONFIG_ARCH_QCOM=y -CONFIG_ARCH_MEDIATEK=y CONFIG_ARCH_MSM8X60=y CONFIG_ARCH_MSM8960=y CONFIG_ARCH_MSM8974=y CONFIG_ARCH_ROCKCHIP=y -CONFIG_ARCH_SOCFPGA=y -CONFIG_PLAT_SPEAR=y -CONFIG_ARCH_SPEAR13XX=y -CONFIG_MACH_SPEAR1310=y -CONFIG_MACH_SPEAR1340=y -CONFIG_ARCH_STI=y -CONFIG_ARCH_STM32=y -CONFIG_ARCH_EXYNOS=y -CONFIG_EXYNOS5420_MCPM=y CONFIG_ARCH_RENESAS=y CONFIG_ARCH_EMEV2=y CONFIG_ARCH_R7S72100=y @@ -99,40 +89,33 @@ CONFIG_ARCH_R8A7792=y CONFIG_ARCH_R8A7793=y CONFIG_ARCH_R8A7794=y CONFIG_ARCH_SH73A0=y +CONFIG_ARCH_SOCFPGA=y +CONFIG_PLAT_SPEAR=y +CONFIG_ARCH_SPEAR13XX=y +CONFIG_MACH_SPEAR1310=y +CONFIG_MACH_SPEAR1340=y +CONFIG_ARCH_STI=y +CONFIG_ARCH_STM32=y CONFIG_ARCH_SUNXI=y -CONFIG_ARCH_SIRF=y CONFIG_ARCH_TEGRA=y -CONFIG_ARCH_TEGRA_2x_SOC=y -CONFIG_ARCH_TEGRA_3x_SOC=y -CONFIG_ARCH_TEGRA_114_SOC=y -CONFIG_ARCH_TEGRA_124_SOC=y CONFIG_ARCH_UNIPHIER=y CONFIG_ARCH_U8500=y -CONFIG_MACH_HREFV60=y -CONFIG_MACH_SNOWBALL=y CONFIG_ARCH_VEXPRESS=y CONFIG_ARCH_VEXPRESS_TC2_PM=y CONFIG_ARCH_WM8850=y CONFIG_ARCH_ZYNQ=y -CONFIG_TRUSTED_FOUNDATIONS=y -CONFIG_PCI=y -CONFIG_PCI_HOST_GENERIC=y -CONFIG_PCI_DRA7XX=y -CONFIG_PCI_DRA7XX_EP=y -CONFIG_PCI_KEYSTONE=y -CONFIG_PCI_MSI=y +CONFIG_PCIEPORTBUS=y CONFIG_PCI_MVEBU=y CONFIG_PCI_TEGRA=y CONFIG_PCI_RCAR_GEN2=y CONFIG_PCIE_RCAR=y -CONFIG_PCIEPORTBUS=y +CONFIG_PCI_DRA7XX_EP=y +CONFIG_PCI_KEYSTONE=y CONFIG_PCI_ENDPOINT=y CONFIG_PCI_ENDPOINT_CONFIGFS=y CONFIG_PCI_EPF_TEST=m CONFIG_SMP=y CONFIG_NR_CPUS=16 -CONFIG_HIGHPTE=y -CONFIG_CMA=y CONFIG_SECCOMP=y CONFIG_ARM_APPENDED_DTB=y CONFIG_ARM_ATAG_DTB_COMPAT=y @@ -145,14 +128,14 @@ CONFIG_CPU_FREQ_GOV_POWERSAVE=m CONFIG_CPU_FREQ_GOV_USERSPACE=m CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y +CONFIG_CPUFREQ_DT=y CONFIG_ARM_IMX6Q_CPUFREQ=y CONFIG_QORIQ_CPUFREQ=y CONFIG_CPU_IDLE=y CONFIG_ARM_CPUIDLE=y -CONFIG_NEON=y -CONFIG_KERNEL_MODE_NEON=y CONFIG_ARM_ZYNQ_CPUIDLE=y CONFIG_ARM_EXYNOS_CPUIDLE=y +CONFIG_KERNEL_MODE_NEON=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -170,23 +153,13 @@ CONFIG_IPV6_MIP6=m CONFIG_IPV6_TUNNEL=m CONFIG_IPV6_MULTIPLE_TABLES=y CONFIG_NET_DSA=m -CONFIG_NET_SWITCHDEV=y CONFIG_CAN=y -CONFIG_CAN_RAW=y -CONFIG_CAN_BCM=y -CONFIG_CAN_DEV=y CONFIG_CAN_AT91=m CONFIG_CAN_FLEXCAN=m -CONFIG_CAN_RCAR=m +CONFIG_CAN_SUN4I=y CONFIG_CAN_XILINXCAN=y +CONFIG_CAN_RCAR=m CONFIG_CAN_MCP251X=y -CONFIG_NET_DSA_BCM_SF2=m -CONFIG_B53=m -CONFIG_B53_SPI_DRIVER=m -CONFIG_B53_MDIO_DRIVER=m -CONFIG_B53_MMAP_DRIVER=m -CONFIG_B53_SRAB_DRIVER=m -CONFIG_CAN_SUN4I=y CONFIG_BT=m CONFIG_BT_HCIUART=m CONFIG_BT_HCIUART_BCM=y @@ -199,11 +172,9 @@ CONFIG_RFKILL_INPUT=y CONFIG_RFKILL_GPIO=y CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y -CONFIG_DMA_CMA=y CONFIG_CMA_SIZE_MBYTES=64 CONFIG_OMAP_OCP2SCP=y CONFIG_SIMPLE_PM_BUS=y -CONFIG_SUNXI_RSB=y CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_BLOCK=y @@ -236,7 +207,6 @@ CONFIG_PCI_ENDPOINT_TEST=m CONFIG_EEPROM_AT24=y CONFIG_BLK_DEV_SD=y CONFIG_BLK_DEV_SR=y -CONFIG_SCSI_MULTI_LUN=y CONFIG_ATA=y CONFIG_SATA_AHCI=y CONFIG_SATA_AHCI_PLATFORM=y @@ -251,14 +221,20 @@ CONFIG_SATA_MV=y CONFIG_SATA_RCAR=y CONFIG_NETDEVICES=y CONFIG_VIRTIO_NET=y -CONFIG_HIX5HD2_GMAC=y +CONFIG_B53_SPI_DRIVER=m +CONFIG_B53_MDIO_DRIVER=m +CONFIG_B53_MMAP_DRIVER=m +CONFIG_B53_SRAB_DRIVER=m +CONFIG_NET_DSA_BCM_SF2=m CONFIG_SUN4I_EMAC=y -CONFIG_MACB=y CONFIG_BCMGENET=m CONFIG_BGMAC_BCMA=y CONFIG_SYSTEMPORT=m +CONFIG_MACB=y CONFIG_NET_CALXEDA_XGMAC=y CONFIG_GIANFAR=y +CONFIG_HIX5HD2_GMAC=y +CONFIG_E1000E=y CONFIG_IGB=y CONFIG_MV643XX_ETH=y CONFIG_MVNETA=y @@ -268,19 +244,17 @@ CONFIG_R8169=y CONFIG_SH_ETH=y CONFIG_SMSC911X=y CONFIG_STMMAC_ETH=y -CONFIG_STMMAC_PLATFORM=y CONFIG_DWMAC_DWC_QOS_ETH=y CONFIG_TI_CPSW=y CONFIG_XILINX_EMACLITE=y CONFIG_AT803X_PHY=y -CONFIG_MARVELL_PHY=y -CONFIG_SMSC_PHY=y CONFIG_BROADCOM_PHY=y CONFIG_ICPLUS_PHY=y -CONFIG_REALTEK_PHY=y +CONFIG_MARVELL_PHY=y CONFIG_MICREL_PHY=y -CONFIG_FIXED_PHY=y +CONFIG_REALTEK_PHY=y CONFIG_ROCKCHIP_PHY=y +CONFIG_SMSC_PHY=y CONFIG_USB_PEGASUS=y CONFIG_USB_RTL8152=m CONFIG_USB_LAN78XX=m @@ -288,29 +262,29 @@ CONFIG_USB_USBNET=y CONFIG_USB_NET_SMSC75XX=y CONFIG_USB_NET_SMSC95XX=y CONFIG_BRCMFMAC=m -CONFIG_RT2X00=m -CONFIG_RT2800USB=m CONFIG_MWIFIEX=m CONFIG_MWIFIEX_SDIO=m +CONFIG_RT2X00=m +CONFIG_RT2800USB=m CONFIG_INPUT_JOYDEV=y CONFIG_INPUT_EVDEV=y CONFIG_KEYBOARD_QT1070=m CONFIG_KEYBOARD_GPIO=y CONFIG_KEYBOARD_TEGRA=y -CONFIG_KEYBOARD_SPEAR=y +CONFIG_KEYBOARD_SAMSUNG=m CONFIG_KEYBOARD_ST_KEYSCAN=y +CONFIG_KEYBOARD_SPEAR=y CONFIG_KEYBOARD_CROS_EC=m -CONFIG_KEYBOARD_SAMSUNG=m CONFIG_MOUSE_PS2_ELANTECH=y CONFIG_MOUSE_CYAPA=m CONFIG_MOUSE_ELAN_I2C=y CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_ATMEL_MXT=m CONFIG_TOUCHSCREEN_MMS114=m +CONFIG_TOUCHSCREEN_WM97XX=m CONFIG_TOUCHSCREEN_ST1232=m CONFIG_TOUCHSCREEN_STMPE=y CONFIG_TOUCHSCREEN_SUN4I=y -CONFIG_TOUCHSCREEN_WM97XX=m CONFIG_INPUT_MISC=y CONFIG_INPUT_MAX77693_HAPTIC=m CONFIG_INPUT_MAX8997_HAPTIC=m @@ -327,13 +301,12 @@ CONFIG_SERIAL_8250_DW=y CONFIG_SERIAL_8250_EM=y CONFIG_SERIAL_8250_MT6577=y CONFIG_SERIAL_8250_UNIPHIER=y +CONFIG_SERIAL_OF_PLATFORM=y CONFIG_SERIAL_AMBA_PL011=y CONFIG_SERIAL_AMBA_PL011_CONSOLE=y CONFIG_SERIAL_ATMEL=y CONFIG_SERIAL_ATMEL_CONSOLE=y CONFIG_SERIAL_ATMEL_TTYAT=y -CONFIG_SERIAL_BCM63XX=y -CONFIG_SERIAL_BCM63XX_CONSOLE=y CONFIG_SERIAL_MESON=y CONFIG_SERIAL_MESON_CONSOLE=y CONFIG_SERIAL_SAMSUNG=y @@ -345,15 +318,14 @@ CONFIG_SERIAL_IMX=y CONFIG_SERIAL_IMX_CONSOLE=y CONFIG_SERIAL_SH_SCI=y CONFIG_SERIAL_SH_SCI_NR_UARTS=20 -CONFIG_SERIAL_SH_SCI_CONSOLE=y -CONFIG_SERIAL_SH_SCI_DMA=y CONFIG_SERIAL_MSM=y CONFIG_SERIAL_MSM_CONSOLE=y CONFIG_SERIAL_VT8500=y CONFIG_SERIAL_VT8500_CONSOLE=y -CONFIG_SERIAL_OF_PLATFORM=y CONFIG_SERIAL_OMAP=y CONFIG_SERIAL_OMAP_CONSOLE=y +CONFIG_SERIAL_BCM63XX=y +CONFIG_SERIAL_BCM63XX_CONSOLE=y CONFIG_SERIAL_XILINX_PS_UART=y CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y CONFIG_SERIAL_FSL_LPUART=y @@ -365,12 +337,10 @@ CONFIG_SERIAL_ST_ASC_CONSOLE=y CONFIG_SERIAL_STM32=y CONFIG_SERIAL_STM32_CONSOLE=y CONFIG_SERIAL_DEV_BUS=y -CONFIG_HVC_DRIVER=y CONFIG_VIRTIO_CONSOLE=y +CONFIG_HW_RANDOM=y +CONFIG_HW_RANDOM_ST=y CONFIG_I2C_CHARDEV=y -CONFIG_I2C_DAVINCI=y -CONFIG_I2C_MESON=y -CONFIG_I2C_MUX=y CONFIG_I2C_ARB_GPIO_CHALLENGE=m CONFIG_I2C_MUX_PCA954x=y CONFIG_I2C_MUX_PINCTRL=y @@ -378,12 +348,13 @@ CONFIG_I2C_DEMUX_PINCTRL=y CONFIG_I2C_AT91=m CONFIG_I2C_BCM2835=y CONFIG_I2C_CADENCE=y +CONFIG_I2C_DAVINCI=y CONFIG_I2C_DESIGNWARE_PLATFORM=y CONFIG_I2C_DIGICOLOR=m CONFIG_I2C_EMEV2=m CONFIG_I2C_GPIO=m -CONFIG_I2C_EXYNOS5=y CONFIG_I2C_IMX=y +CONFIG_I2C_MESON=y CONFIG_I2C_MV64XXX=y CONFIG_I2C_RIIC=y CONFIG_I2C_RK3X=y @@ -427,7 +398,6 @@ CONFIG_SPI_SPIDEV=y CONFIG_SPMI=y CONFIG_PINCTRL_AS3722=y CONFIG_PINCTRL_PALMAS=y -CONFIG_PINCTRL_BCM2835=y CONFIG_PINCTRL_APQ8064=y CONFIG_PINCTRL_APQ8084=y CONFIG_PINCTRL_IPQ8064=y @@ -437,25 +407,33 @@ CONFIG_PINCTRL_MSM8X74=y CONFIG_PINCTRL_MSM8916=y CONFIG_PINCTRL_QCOM_SPMI_PMIC=y CONFIG_PINCTRL_QCOM_SSBI_PMIC=y -CONFIG_GPIO_GENERIC_PLATFORM=y CONFIG_GPIO_DAVINCI=y CONFIG_GPIO_DWAPB=y CONFIG_GPIO_EM=y CONFIG_GPIO_RCAR=y +CONFIG_GPIO_SYSCON=y CONFIG_GPIO_UNIPHIER=y CONFIG_GPIO_XILINX=y CONFIG_GPIO_ZYNQ=y CONFIG_GPIO_PCA953X=y CONFIG_GPIO_PCA953X_IRQ=y CONFIG_GPIO_PCF857X=y -CONFIG_GPIO_TWL4030=y CONFIG_GPIO_PALMAS=y -CONFIG_GPIO_SYSCON=y CONFIG_GPIO_TPS6586X=y CONFIG_GPIO_TPS65910=y +CONFIG_GPIO_TWL4030=y +CONFIG_POWER_AVS=y +CONFIG_ROCKCHIP_IODOMAIN=y +CONFIG_POWER_RESET_AS3722=y +CONFIG_POWER_RESET_GPIO=y +CONFIG_POWER_RESET_GPIO_RESTART=y +CONFIG_POWER_RESET_ST=y +CONFIG_POWER_RESET_KEYSTONE=y +CONFIG_POWER_RESET_RMOBILE=y CONFIG_BATTERY_ACT8945A=y CONFIG_BATTERY_CPCAP=m CONFIG_BATTERY_SBS=y +CONFIG_AXP20X_POWER=m CONFIG_BATTERY_MAX17040=m CONFIG_BATTERY_MAX17042=m CONFIG_CHARGER_CPCAP=m @@ -464,15 +442,6 @@ CONFIG_CHARGER_MAX77693=m CONFIG_CHARGER_MAX8997=m CONFIG_CHARGER_MAX8998=m CONFIG_CHARGER_TPS65090=y -CONFIG_AXP20X_POWER=m -CONFIG_POWER_RESET_AS3722=y -CONFIG_POWER_RESET_GPIO=y -CONFIG_POWER_RESET_GPIO_RESTART=y -CONFIG_POWER_RESET_KEYSTONE=y -CONFIG_POWER_RESET_RMOBILE=y -CONFIG_POWER_RESET_ST=y -CONFIG_POWER_AVS=y -CONFIG_ROCKCHIP_IODOMAIN=y CONFIG_SENSORS_IIO_HWMON=y CONFIG_SENSORS_LM90=y CONFIG_SENSORS_LM95245=y @@ -480,14 +449,12 @@ CONFIG_SENSORS_NTC_THERMISTOR=m CONFIG_SENSORS_PWM_FAN=m CONFIG_SENSORS_INA2XX=m CONFIG_CPU_THERMAL=y -CONFIG_BCM2835_THERMAL=m -CONFIG_BRCMSTB_THERMAL=m CONFIG_IMX_THERMAL=y CONFIG_ROCKCHIP_THERMAL=y CONFIG_RCAR_THERMAL=y CONFIG_ARMADA_THERMAL=y -CONFIG_DAVINCI_WATCHDOG=m -CONFIG_EXYNOS_THERMAL=m +CONFIG_BCM2835_THERMAL=m +CONFIG_BRCMSTB_THERMAL=m CONFIG_ST_THERMAL_MEMMAP=y CONFIG_WATCHDOG=y CONFIG_DA9063_WATCHDOG=m @@ -495,20 +462,24 @@ CONFIG_XILINX_WATCHDOG=y CONFIG_ARM_SP805_WATCHDOG=y CONFIG_AT91SAM9X_WATCHDOG=y CONFIG_SAMA5D4_WATCHDOG=y +CONFIG_DW_WATCHDOG=y +CONFIG_DAVINCI_WATCHDOG=m CONFIG_ORION_WATCHDOG=y CONFIG_RN5T618_WATCHDOG=y -CONFIG_ST_LPC_WATCHDOG=y CONFIG_SUNXI_WATCHDOG=y CONFIG_IMX2_WDT=y +CONFIG_ST_LPC_WATCHDOG=y CONFIG_TEGRA_WATCHDOG=m CONFIG_MESON_WATCHDOG=y -CONFIG_DW_WATCHDOG=y CONFIG_DIGICOLOR_WATCHDOG=y CONFIG_RENESAS_WDT=m -CONFIG_BCM2835_WDT=y CONFIG_BCM47XX_WDT=y -CONFIG_BCM7038_WDT=m +CONFIG_BCM2835_WDT=y CONFIG_BCM_KONA_WDT=y +CONFIG_BCM7038_WDT=m +CONFIG_BCMA_HOST_SOC=y +CONFIG_BCMA_DRIVER_GMAC_CMN=y +CONFIG_BCMA_DRIVER_GPIO=y CONFIG_MFD_ACT8945A=y CONFIG_MFD_AS3711=y CONFIG_MFD_AS3722=y @@ -516,7 +487,6 @@ CONFIG_MFD_ATMEL_FLEXCOM=y CONFIG_MFD_ATMEL_HLCDC=m CONFIG_MFD_BCM590XX=y CONFIG_MFD_AC100=y -CONFIG_MFD_AXP20X=y CONFIG_MFD_AXP20X_I2C=y CONFIG_MFD_AXP20X_RSB=y CONFIG_MFD_CROS_EC=m @@ -529,11 +499,11 @@ CONFIG_MFD_MAX77693=m CONFIG_MFD_MAX8907=y CONFIG_MFD_MAX8997=y CONFIG_MFD_MAX8998=y -CONFIG_MFD_RK808=y CONFIG_MFD_CPCAP=y CONFIG_MFD_PM8XXX=y CONFIG_MFD_QCOM_RPM=y CONFIG_MFD_SPMI_PMIC=y +CONFIG_MFD_RK808=y CONFIG_MFD_RN5T618=y CONFIG_MFD_SEC_CORE=y CONFIG_MFD_STMPE=y @@ -543,10 +513,10 @@ CONFIG_MFD_TPS65217=y CONFIG_MFD_TPS65218=y CONFIG_MFD_TPS6586X=y CONFIG_MFD_TPS65910=y -CONFIG_REGULATOR_ACT8945A=y -CONFIG_REGULATOR_AB8500=y CONFIG_REGULATOR_ACT8865=y +CONFIG_REGULATOR_ACT8945A=y CONFIG_REGULATOR_ANATOP=y +CONFIG_REGULATOR_AB8500=y CONFIG_REGULATOR_AS3711=y CONFIG_REGULATOR_AS3722=y CONFIG_REGULATOR_AXP20X=y @@ -554,10 +524,7 @@ CONFIG_REGULATOR_BCM590XX=y CONFIG_REGULATOR_CPCAP=y CONFIG_REGULATOR_DA9210=y CONFIG_REGULATOR_FAN53555=y -CONFIG_REGULATOR_RK808=y CONFIG_REGULATOR_GPIO=y -CONFIG_MFD_SYSCON=y -CONFIG_POWER_RESET_SYSCON=y CONFIG_REGULATOR_LP872X=y CONFIG_REGULATOR_MAX14577=m CONFIG_REGULATOR_MAX8907=y @@ -571,7 +538,8 @@ CONFIG_REGULATOR_PALMAS=y CONFIG_REGULATOR_PBIAS=y CONFIG_REGULATOR_PWM=y CONFIG_REGULATOR_QCOM_RPM=y -CONFIG_REGULATOR_QCOM_SMD_RPM=y +CONFIG_REGULATOR_QCOM_SMD_RPM=m +CONFIG_REGULATOR_RK808=y CONFIG_REGULATOR_RN5T618=y CONFIG_REGULATOR_S2MPS11=y CONFIG_REGULATOR_S5M8767=y @@ -592,18 +560,17 @@ CONFIG_MEDIA_CEC_SUPPORT=y CONFIG_MEDIA_CONTROLLER=y CONFIG_VIDEO_V4L2_SUBDEV_API=y CONFIG_MEDIA_USB_SUPPORT=y -CONFIG_USB_VIDEO_CLASS=y -CONFIG_USB_GSPCA=y +CONFIG_USB_VIDEO_CLASS=m CONFIG_V4L_PLATFORM_DRIVERS=y CONFIG_SOC_CAMERA=m CONFIG_SOC_CAMERA_PLATFORM=m -CONFIG_VIDEO_RCAR_VIN=m -CONFIG_VIDEO_ATMEL_ISI=m CONFIG_VIDEO_SAMSUNG_EXYNOS4_IS=m CONFIG_VIDEO_S5P_FIMC=m CONFIG_VIDEO_S5P_MIPI_CSIS=m CONFIG_VIDEO_EXYNOS_FIMC_LITE=m CONFIG_VIDEO_EXYNOS4_FIMC_IS=m +CONFIG_VIDEO_RCAR_VIN=m +CONFIG_VIDEO_ATMEL_ISI=m CONFIG_V4L_MEM2MEM_DRIVERS=y CONFIG_VIDEO_SAMSUNG_S5P_JPEG=m CONFIG_VIDEO_SAMSUNG_S5P_MFC=m @@ -614,19 +581,15 @@ CONFIG_VIDEO_STI_DELTA=m CONFIG_VIDEO_RENESAS_JPU=m CONFIG_VIDEO_RENESAS_VSP1=m CONFIG_V4L_TEST_DRIVERS=y +CONFIG_VIDEO_VIVID=m CONFIG_CEC_PLATFORM_DRIVERS=y CONFIG_VIDEO_SAMSUNG_S5P_CEC=m # CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set CONFIG_VIDEO_ADV7180=m CONFIG_VIDEO_ML86V7667=m CONFIG_DRM=y -CONFIG_DRM_I2C_ADV7511=m -CONFIG_DRM_I2C_ADV7511_AUDIO=y # CONFIG_DRM_I2C_CH7006 is not set # CONFIG_DRM_I2C_SIL164 is not set -CONFIG_DRM_DUMB_VGA_DAC=m -CONFIG_DRM_NXP_PTN3460=m -CONFIG_DRM_PARADE_PS8622=m CONFIG_DRM_NOUVEAU=m CONFIG_DRM_EXYNOS=m CONFIG_DRM_EXYNOS_FIMD=y @@ -645,13 +608,18 @@ CONFIG_DRM_RCAR_LVDS=y CONFIG_DRM_SUN4I=m CONFIG_DRM_FSL_DCU=m CONFIG_DRM_TEGRA=y +CONFIG_DRM_PANEL_SIMPLE=y CONFIG_DRM_PANEL_SAMSUNG_LD9040=m CONFIG_DRM_PANEL_SAMSUNG_S6E63J0X03=m CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0=m -CONFIG_DRM_PANEL_SIMPLE=y +CONFIG_DRM_DUMB_VGA_DAC=m +CONFIG_DRM_NXP_PTN3460=m +CONFIG_DRM_PARADE_PS8622=m CONFIG_DRM_SII9234=m +CONFIG_DRM_I2C_ADV7511=m +CONFIG_DRM_I2C_ADV7511_AUDIO=y CONFIG_DRM_STI=m -CONFIG_DRM_VC4=y +CONFIG_DRM_VC4=m CONFIG_DRM_ETNAVIV=m CONFIG_DRM_MXSFB=m CONFIG_FB_ARMCLCD=y @@ -659,8 +627,6 @@ CONFIG_FB_EFI=y CONFIG_FB_WM8505=y CONFIG_FB_SH_MOBILE_LCDC=y CONFIG_FB_SIMPLE=y -CONFIG_BACKLIGHT_LCD_SUPPORT=y -CONFIG_BACKLIGHT_CLASS_DEVICE=y CONFIG_LCD_PLATFORM=m CONFIG_BACKLIGHT_PWM=y CONFIG_BACKLIGHT_AS3711=y @@ -668,7 +634,6 @@ CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y CONFIG_SOUND=m CONFIG_SND=m -CONFIG_SND_DYNAMIC_MINORS=y CONFIG_SND_HDA_TEGRA=m CONFIG_SND_HDA_INPUT_BEEP=y CONFIG_SND_HDA_PATCH_LOADER=y @@ -692,7 +657,7 @@ CONFIG_SND_SOC_SNOW=m CONFIG_SND_SOC_ODROID=m CONFIG_SND_SOC_SH4_FSI=m CONFIG_SND_SOC_RCAR=m -CONFIG_SND_SIMPLE_SCU_CARD=m +CONFIG_SND_SOC_STI=m CONFIG_SND_SUN4I_CODEC=m CONFIG_SND_SOC_TEGRA=m CONFIG_SND_SOC_TEGRA20_I2S=m @@ -703,31 +668,25 @@ CONFIG_SND_SOC_TEGRA_WM8903=m CONFIG_SND_SOC_TEGRA_WM9712=m CONFIG_SND_SOC_TEGRA_TRIMSLICE=m CONFIG_SND_SOC_TEGRA_ALC5632=m -CONFIG_SND_SOC_CPCAP=m CONFIG_SND_SOC_TEGRA_MAX98090=m CONFIG_SND_SOC_AK4642=m +CONFIG_SND_SOC_CPCAP=m CONFIG_SND_SOC_SGTL5000=m CONFIG_SND_SOC_SPDIF=m -CONFIG_SND_SOC_WM8978=m -CONFIG_SND_SOC_STI=m CONFIG_SND_SOC_STI_SAS=m -CONFIG_SND_SIMPLE_CARD=m +CONFIG_SND_SOC_WM8978=m +CONFIG_SND_SIMPLE_SCU_CARD=m CONFIG_USB=y CONFIG_USB_OTG=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_MVEBU=y -CONFIG_USB_XHCI_RCAR=m CONFIG_USB_XHCI_TEGRA=m CONFIG_USB_EHCI_HCD=y -CONFIG_USB_EHCI_MSM=m -CONFIG_USB_EHCI_EXYNOS=y -CONFIG_USB_EHCI_TEGRA=y CONFIG_USB_EHCI_HCD_STI=y -CONFIG_USB_EHCI_HCD_PLATFORM=y -CONFIG_USB_ISP1760=y +CONFIG_USB_EHCI_TEGRA=y +CONFIG_USB_EHCI_EXYNOS=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_STI=y -CONFIG_USB_OHCI_HCD_PLATFORM=y CONFIG_USB_OHCI_EXYNOS=m CONFIG_USB_R8A66597_HCD=m CONFIG_USB_RENESAS_USBHS=m @@ -746,18 +705,18 @@ CONFIG_USB_TI_CPPI41_DMA=y CONFIG_USB_TUSB_OMAP_DMA=y CONFIG_USB_DWC3=y CONFIG_USB_DWC2=y -CONFIG_USB_HSIC_USB3503=y CONFIG_USB_CHIPIDEA=y CONFIG_USB_CHIPIDEA_UDC=y CONFIG_USB_CHIPIDEA_HOST=y +CONFIG_USB_ISP1760=y +CONFIG_USB_HSIC_USB3503=y CONFIG_AB8500_USB=y -CONFIG_KEYSTONE_USB_PHY=y +CONFIG_KEYSTONE_USB_PHY=m CONFIG_NOP_USB_XCEIV=m CONFIG_AM335X_PHY_USB=m CONFIG_TWL6030_USB=m CONFIG_USB_GPIO_VBUS=y CONFIG_USB_ISP1301=y -CONFIG_USB_MSM_OTG=m CONFIG_USB_MXS_PHY=y CONFIG_USB_GADGET=y CONFIG_USB_FSL_USB2=y @@ -793,21 +752,20 @@ CONFIG_MMC_SDHCI_OF_ESDHC=y CONFIG_MMC_SDHCI_ESDHC_IMX=y CONFIG_MMC_SDHCI_DOVE=y CONFIG_MMC_SDHCI_TEGRA=y +CONFIG_MMC_SDHCI_S3C=y CONFIG_MMC_SDHCI_PXAV3=y CONFIG_MMC_SDHCI_SPEAR=y -CONFIG_MMC_SDHCI_S3C=y CONFIG_MMC_SDHCI_S3C_DMA=y CONFIG_MMC_SDHCI_BCM_KONA=y +CONFIG_MMC_MESON_MX_SDIO=y CONFIG_MMC_SDHCI_ST=y CONFIG_MMC_OMAP=y CONFIG_MMC_OMAP_HS=y CONFIG_MMC_ATMELMCI=y CONFIG_MMC_SDHCI_MSM=y -CONFIG_MMC_MESON_MX_SDIO=y CONFIG_MMC_MVSDIO=y CONFIG_MMC_SDHI=y CONFIG_MMC_DW=y -CONFIG_MMC_DW_PLTFM=y CONFIG_MMC_DW_EXYNOS=y CONFIG_MMC_DW_ROCKCHIP=y CONFIG_MMC_SH_MMCIF=y @@ -847,94 +805,85 @@ CONFIG_RTC_DRV_MAX77686=y CONFIG_RTC_DRV_RK808=m CONFIG_RTC_DRV_RS5C372=m CONFIG_RTC_DRV_BQ32K=m -CONFIG_RTC_DRV_PALMAS=y -CONFIG_RTC_DRV_ST_LPC=y CONFIG_RTC_DRV_TWL4030=y +CONFIG_RTC_DRV_PALMAS=y CONFIG_RTC_DRV_TPS6586X=y CONFIG_RTC_DRV_TPS65910=y CONFIG_RTC_DRV_S35390A=m CONFIG_RTC_DRV_RX8581=m CONFIG_RTC_DRV_EM3027=y +CONFIG_RTC_DRV_S5M=m CONFIG_RTC_DRV_DA9063=m CONFIG_RTC_DRV_EFI=m CONFIG_RTC_DRV_DIGICOLOR=m -CONFIG_RTC_DRV_S5M=m CONFIG_RTC_DRV_S3C=m CONFIG_RTC_DRV_PL031=y CONFIG_RTC_DRV_AT91RM9200=m CONFIG_RTC_DRV_AT91SAM9=m CONFIG_RTC_DRV_VT8500=y -CONFIG_RTC_DRV_SUN6I=y CONFIG_RTC_DRV_SUNXI=y CONFIG_RTC_DRV_MV=y CONFIG_RTC_DRV_TEGRA=y +CONFIG_RTC_DRV_ST_LPC=y CONFIG_RTC_DRV_CPCAP=m CONFIG_DMADEVICES=y -CONFIG_DW_DMAC=y CONFIG_AT_HDMAC=y CONFIG_AT_XDMAC=y +CONFIG_DMA_BCM2835=y +CONFIG_DMA_SUN6I=y CONFIG_FSL_EDMA=y +CONFIG_IMX_DMA=y +CONFIG_IMX_SDMA=y CONFIG_MV_XOR=y +CONFIG_MXS_DMA=y +CONFIG_PL330_DMA=y +CONFIG_SIRF_DMA=y +CONFIG_STE_DMA40=y +CONFIG_ST_FDMA=m CONFIG_TEGRA20_APB_DMA=y +CONFIG_XILINX_DMA=y +CONFIG_QCOM_BAM_DMA=y +CONFIG_DW_DMAC=y CONFIG_SH_DMAE=y CONFIG_RCAR_DMAC=y CONFIG_RENESAS_USB_DMAC=m -CONFIG_STE_DMA40=y -CONFIG_SIRF_DMA=y -CONFIG_TI_EDMA=y -CONFIG_PL330_DMA=y -CONFIG_IMX_SDMA=y -CONFIG_IMX_DMA=y -CONFIG_MXS_DMA=y -CONFIG_DMA_BCM2835=y -CONFIG_DMA_OMAP=y -CONFIG_QCOM_BAM_DMA=y -CONFIG_XILINX_DMA=y -CONFIG_DMA_SUN6I=y -CONFIG_ST_FDMA=m +CONFIG_VIRTIO_PCI=y +CONFIG_VIRTIO_MMIO=y CONFIG_STAGING=y -CONFIG_SENSORS_ISL29018=y -CONFIG_SENSORS_ISL29028=y CONFIG_MFD_NVEC=y CONFIG_KEYBOARD_NVEC=y CONFIG_SERIO_NVEC_PS2=y CONFIG_NVEC_POWER=y CONFIG_NVEC_PAZ00=y -CONFIG_BCMA=y -CONFIG_BCMA_HOST_SOC=y -CONFIG_BCMA_DRIVER_GMAC_CMN=y -CONFIG_BCMA_DRIVER_GPIO=y -CONFIG_QCOM_GSBI=y -CONFIG_QCOM_PM=y -CONFIG_QCOM_SMEM=y -CONFIG_QCOM_SMD_RPM=y -CONFIG_QCOM_SMP2P=y -CONFIG_QCOM_SMSM=y -CONFIG_QCOM_WCNSS_CTRL=m -CONFIG_ROCKCHIP_PM_DOMAINS=y -CONFIG_COMMON_CLK_QCOM=y -CONFIG_QCOM_CLK_RPM=y -CONFIG_CHROME_PLATFORMS=y CONFIG_STAGING_BOARD=y -CONFIG_CROS_EC_CHARDEV=m CONFIG_COMMON_CLK_MAX77686=y CONFIG_COMMON_CLK_RK808=m CONFIG_COMMON_CLK_S2MPS11=m +CONFIG_COMMON_CLK_QCOM=y +CONFIG_QCOM_CLK_RPM=y CONFIG_APQ_MMCC_8084=y CONFIG_MSM_GCC_8660=y CONFIG_MSM_MMCC_8960=y CONFIG_MSM_MMCC_8974=y -CONFIG_HWSPINLOCK_QCOM=y +CONFIG_BCM2835_MBOX=y CONFIG_ROCKCHIP_IOMMU=y CONFIG_TEGRA_IOMMU_GART=y CONFIG_TEGRA_IOMMU_SMMU=y CONFIG_REMOTEPROC=m CONFIG_ST_REMOTEPROC=m CONFIG_RPMSG_VIRTIO=m +CONFIG_RASPBERRYPI_POWER=y +CONFIG_QCOM_GSBI=y +CONFIG_QCOM_PM=y +CONFIG_QCOM_SMD_RPM=m +CONFIG_QCOM_WCNSS_CTRL=m +CONFIG_ROCKCHIP_PM_DOMAINS=y +CONFIG_ARCH_TEGRA_2x_SOC=y +CONFIG_ARCH_TEGRA_3x_SOC=y +CONFIG_ARCH_TEGRA_114_SOC=y +CONFIG_ARCH_TEGRA_124_SOC=y CONFIG_PM_DEVFREQ=y CONFIG_ARM_TEGRA_DEVFREQ=m -CONFIG_MEMORY=y -CONFIG_EXTCON=y CONFIG_TI_AEMIF=y CONFIG_IIO=y CONFIG_IIO_SW_TRIGGER=y @@ -947,56 +896,54 @@ CONFIG_VF610_ADC=m CONFIG_XILINX_XADC=y CONFIG_MPU3050_I2C=y CONFIG_CM36651=m +CONFIG_SENSORS_ISL29018=y +CONFIG_SENSORS_ISL29028=y CONFIG_AK8975=y -CONFIG_RASPBERRYPI_POWER=y CONFIG_IIO_HRTIMER_TRIGGER=y CONFIG_PWM=y CONFIG_PWM_ATMEL=m CONFIG_PWM_ATMEL_HLCDC_PWM=m CONFIG_PWM_ATMEL_TCB=m +CONFIG_PWM_BCM2835=y +CONFIG_PWM_BRCMSTB=m CONFIG_PWM_FSL_FTM=m CONFIG_PWM_MESON=m CONFIG_PWM_RCAR=m CONFIG_PWM_RENESAS_TPU=y CONFIG_PWM_ROCKCHIP=m CONFIG_PWM_SAMSUNG=m +CONFIG_PWM_STI=y CONFIG_PWM_SUN4I=y CONFIG_PWM_TEGRA=y CONFIG_PWM_VT8500=y +CONFIG_KEYSTONE_IRQ=y +CONFIG_PHY_SUN4I_USB=y +CONFIG_PHY_SUN9I_USB=y CONFIG_PHY_HIX5HD2_SATA=y -CONFIG_E1000E=y -CONFIG_PWM_STI=y -CONFIG_PWM_BCM2835=y -CONFIG_PWM_BRCMSTB=m -CONFIG_PHY_DM816X_USB=m -CONFIG_OMAP_USB2=y -CONFIG_TI_PIPE3=y -CONFIG_TWL4030_USB=m +CONFIG_PHY_BERLIN_SATA=y CONFIG_PHY_BERLIN_USB=y CONFIG_PHY_CPCAP_USB=m -CONFIG_PHY_BERLIN_SATA=y +CONFIG_PHY_QCOM_APQ8064_SATA=m +CONFIG_PHY_RCAR_GEN2=m CONFIG_PHY_ROCKCHIP_DP=m CONFIG_PHY_ROCKCHIP_USB=y -CONFIG_PHY_QCOM_APQ8064_SATA=m +CONFIG_PHY_SAMSUNG_USB2=m CONFIG_PHY_MIPHY28LP=y -CONFIG_PHY_RCAR_GEN2=m CONFIG_PHY_STIH407_USB=y CONFIG_PHY_STM32_USBPHYC=y -CONFIG_PHY_SUN4I_USB=y -CONFIG_PHY_SUN9I_USB=y -CONFIG_PHY_SAMSUNG_USB2=m CONFIG_PHY_TEGRA_XUSB=y -CONFIG_PHY_BRCM_SATA=y -CONFIG_NVMEM=y +CONFIG_PHY_DM816X_USB=m +CONFIG_OMAP_USB2=y +CONFIG_TI_PIPE3=y +CONFIG_TWL4030_USB=m CONFIG_NVMEM_IMX_OCOTP=y CONFIG_NVMEM_SUNXI_SID=y CONFIG_NVMEM_VF610_OCOTP=y -CONFIG_BCM2835_MBOX=y CONFIG_RASPBERRYPI_FIRMWARE=y -CONFIG_EFI_VARS=m -CONFIG_EFI_CAPSULE_LOADER=m CONFIG_BCM47XX_NVRAM=y CONFIG_BCM47XX_SPROM=y +CONFIG_EFI_VARS=m +CONFIG_EFI_CAPSULE_LOADER=m CONFIG_EXT4_FS=y CONFIG_AUTOFS4_FS=y CONFIG_MSDOS_FS=y @@ -1004,7 +951,6 @@ CONFIG_VFAT_FS=y CONFIG_NTFS_FS=y CONFIG_TMPFS_POSIX_ACL=y CONFIG_UBIFS_FS=y -CONFIG_TMPFS=y CONFIG_SQUASHFS=y CONFIG_SQUASHFS_LZO=y CONFIG_SQUASHFS_XZ=y @@ -1020,13 +966,7 @@ CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y CONFIG_NLS_UTF8=y CONFIG_PRINTK_TIME=y -CONFIG_DEBUG_FS=y CONFIG_MAGIC_SYSRQ=y -CONFIG_LOCKUP_DETECTOR=y -CONFIG_CPUFREQ_DT=y -CONFIG_KEYSTONE_IRQ=y -CONFIG_HW_RANDOM=y -CONFIG_HW_RANDOM_ST=y CONFIG_CRYPTO_USER=m CONFIG_CRYPTO_USER_API_HASH=m CONFIG_CRYPTO_USER_API_SKCIPHER=m @@ -1035,27 +975,19 @@ CONFIG_CRYPTO_USER_API_AEAD=m CONFIG_CRYPTO_DEV_MARVELL_CESA=m CONFIG_CRYPTO_DEV_EXYNOS_RNG=m CONFIG_CRYPTO_DEV_S5P=m +CONFIG_CRYPTO_DEV_ATMEL_AES=m +CONFIG_CRYPTO_DEV_ATMEL_TDES=m +CONFIG_CRYPTO_DEV_ATMEL_SHA=m CONFIG_CRYPTO_DEV_SUN4I_SS=m CONFIG_CRYPTO_DEV_ROCKCHIP=m CONFIG_ARM_CRYPTO=y -CONFIG_CRYPTO_SHA1_ARM=m CONFIG_CRYPTO_SHA1_ARM_NEON=m CONFIG_CRYPTO_SHA1_ARM_CE=m CONFIG_CRYPTO_SHA2_ARM_CE=m -CONFIG_CRYPTO_SHA256_ARM=m CONFIG_CRYPTO_SHA512_ARM=m CONFIG_CRYPTO_AES_ARM=m CONFIG_CRYPTO_AES_ARM_BS=m CONFIG_CRYPTO_AES_ARM_CE=m -CONFIG_CRYPTO_CHACHA20_NEON=m -CONFIG_CRYPTO_CRC32_ARM_CE=m -CONFIG_CRYPTO_CRCT10DIF_ARM_CE=m CONFIG_CRYPTO_GHASH_ARM_CE=m -CONFIG_CRYPTO_DEV_ATMEL_AES=m -CONFIG_CRYPTO_DEV_ATMEL_TDES=m -CONFIG_CRYPTO_DEV_ATMEL_SHA=m -CONFIG_VIDEO_VIVID=m -CONFIG_VIRTIO=y -CONFIG_VIRTIO_PCI=y -CONFIG_VIRTIO_PCI_LEGACY=y -CONFIG_VIRTIO_MMIO=y +CONFIG_CRYPTO_CRC32_ARM_CE=m +CONFIG_CRYPTO_CHACHA20_NEON=m -- cgit v1.2.3 From 0fff9001840c314fa4473dee256976b1e4535e73 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 6 Jun 2018 11:25:16 +0200 Subject: ARM: Always build secure_cntvoff.S on ARM V7 to fix shmobile !SMP build If CONFIG_SMP=n, building a kernel for R-Car Gen2 fails with: arch/arm/mach-shmobile/setup-rcar-gen2.o: In function `rcar_gen2_timer_init': setup-rcar-gen2.c:(.init.text+0x30): undefined reference to `secure_cntvoff_init' Indeed, on R-Car Gen2 SoCs, secure_cntvoff_init() is not only needed for secondary CPUs, but also for the boot CPU. This is most visible on SoCs with Cortex A7 cores (e.g. R-Car E2, cfr. commit 9ce3fa6816c2fb59 ("ARM: shmobile: rcar-gen2: Add CA7 arch_timer initialization for r8a7794")), but Cortex A15 is affected, too. Fix this by always providing secure_cntvoff_init() when building for ARM V7. Reported-by: Arnd Bergmann Fixes: 7c607944bc657616 ("ARM: smp: Add initialization of CNTVOFF") Fixes: cad160ed0a94927e ("ARM: shmobile: Convert file to use cntvoff") Signed-off-by: Geert Uytterhoeven Reviewed-by: Maxime Ripard Reviewed-by: Simon Horman Signed-off-by: Olof Johansson --- arch/arm/common/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile index 1e9f7af8f70f..3157be413297 100644 --- a/arch/arm/common/Makefile +++ b/arch/arm/common/Makefile @@ -10,7 +10,7 @@ obj-$(CONFIG_DMABOUNCE) += dmabounce.o obj-$(CONFIG_SHARP_LOCOMO) += locomo.o obj-$(CONFIG_SHARP_PARAM) += sharpsl_param.o obj-$(CONFIG_SHARP_SCOOP) += scoop.o -obj-$(CONFIG_SMP) += secure_cntvoff.o +obj-$(CONFIG_CPU_V7) += secure_cntvoff.o obj-$(CONFIG_PCI_HOST_ITE8152) += it8152.o obj-$(CONFIG_MCPM) += mcpm_head.o mcpm_entry.o mcpm_platsmp.o vlock.o CFLAGS_REMOVE_mcpm_entry.o = -pg -- cgit v1.2.3 From 13399ff25f179811ce9c1df1523eb39f9e4a4772 Mon Sep 17 00:00:00 2001 From: Tomasz Duszynski Date: Mon, 28 May 2018 17:38:59 +0200 Subject: iio: pressure: bmp280: fix relative humidity unit According to IIO ABI relative humidity reading should be returned in milli percent. This patch addresses that by applying proper scaling and returning integer instead of fractional format type specifier. Note that the fixes tag is before the driver was heavily refactored to introduce spi support, so the patch won't apply that far back. Signed-off-by: Tomasz Duszynski Fixes: 14beaa8f5ab1 ("iio: pressure: bmp280: add humidity support") Acked-by: Matt Ranostay Signed-off-by: Jonathan Cameron --- drivers/iio/pressure/bmp280-core.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/iio/pressure/bmp280-core.c b/drivers/iio/pressure/bmp280-core.c index 5ec3e41b65f2..fe87d27779d9 100644 --- a/drivers/iio/pressure/bmp280-core.c +++ b/drivers/iio/pressure/bmp280-core.c @@ -415,10 +415,9 @@ static int bmp280_read_humid(struct bmp280_data *data, int *val, int *val2) } comp_humidity = bmp280_compensate_humidity(data, adc_humidity); - *val = comp_humidity; - *val2 = 1024; + *val = comp_humidity * 1000 / 1024; - return IIO_VAL_FRACTIONAL; + return IIO_VAL_INT; } static int bmp280_read_raw(struct iio_dev *indio_dev, -- cgit v1.2.3 From 288320f6e9a254bb595b4783c9bdfcc7c0e73153 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Wed, 30 May 2018 19:19:36 +0100 Subject: iio: tsl2x7x/tsl2772: avoid potential division by zero It may be possible for tsl2772_get_lux to return a zero lux value and hence a division by zero can occur when lux_val is zero. Check for this case and return -ERANGE to avoid the division by zero. Detected by CoverityScan, CID#1469484 ("Division or modulo by zero") Signed-off-by: Colin Ian King Acked-by: Brian Masney Signed-off-by: Jonathan Cameron --- drivers/iio/light/tsl2772.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/iio/light/tsl2772.c b/drivers/iio/light/tsl2772.c index 34d42a2504c9..df5b2a0da96c 100644 --- a/drivers/iio/light/tsl2772.c +++ b/drivers/iio/light/tsl2772.c @@ -582,6 +582,8 @@ static int tsl2772_als_calibrate(struct iio_dev *indio_dev) "%s: failed to get lux\n", __func__); return lux_val; } + if (lux_val == 0) + return -ERANGE; ret = (chip->settings.als_cal_target * chip->settings.als_gain_trim) / lux_val; -- cgit v1.2.3 From b02ec67a8e38875cdc5f9214be885022f11c0017 Mon Sep 17 00:00:00 2001 From: Leonard Crestez Date: Thu, 7 Jun 2018 21:52:50 +0300 Subject: iio: mma8452: Fix ignoring MMA8452_INT_DRDY Interrupts are ignored if no event bit is set in the status status register and this breaks the buffer interface. No data is shown when running "iio_generic_buffer -n mma8451 -a" and interrupt counts go crazy. Fix by not returning IRQ_NONE if DRDY is set. Fixes: 605f72de137a ("iio: accel: mma8452: improvements to handle multiple events") Signed-off-by: Leonard Crestez cc: Signed-off-by: Jonathan Cameron --- drivers/iio/accel/mma8452.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iio/accel/mma8452.c b/drivers/iio/accel/mma8452.c index 7e3d82cff3d5..c149c9c360fc 100644 --- a/drivers/iio/accel/mma8452.c +++ b/drivers/iio/accel/mma8452.c @@ -1053,7 +1053,7 @@ static irqreturn_t mma8452_interrupt(int irq, void *p) if (src < 0) return IRQ_NONE; - if (!(src & data->chip_info->enabled_events)) + if (!(src & (data->chip_info->enabled_events | MMA8452_INT_DRDY))) return IRQ_NONE; if (src & MMA8452_INT_DRDY) { -- cgit v1.2.3 From 92397a6c38d139d50fabbe9e2dc09b61d53b2377 Mon Sep 17 00:00:00 2001 From: Phil Reid Date: Tue, 5 Jun 2018 14:15:10 +0800 Subject: iio: buffer: fix the function signature to match implementation linux/iio/buffer-dma.h was not updated to when length was changed to unsigned int. Fixes: c043ec1ca5ba ("iio:buffer: make length types match kfifo types") Signed-off-by: Phil Reid Signed-off-by: Jonathan Cameron --- include/linux/iio/buffer-dma.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/iio/buffer-dma.h b/include/linux/iio/buffer-dma.h index 767467d886de..67c75372b691 100644 --- a/include/linux/iio/buffer-dma.h +++ b/include/linux/iio/buffer-dma.h @@ -141,7 +141,7 @@ int iio_dma_buffer_read(struct iio_buffer *buffer, size_t n, char __user *user_buffer); size_t iio_dma_buffer_data_available(struct iio_buffer *buffer); int iio_dma_buffer_set_bytes_per_datum(struct iio_buffer *buffer, size_t bpd); -int iio_dma_buffer_set_length(struct iio_buffer *buffer, int length); +int iio_dma_buffer_set_length(struct iio_buffer *buffer, unsigned int length); int iio_dma_buffer_request_update(struct iio_buffer *buffer); int iio_dma_buffer_init(struct iio_dma_buffer_queue *queue, -- cgit v1.2.3 From 2a221c04228bbf683fc8d3cb5d177aebb38b393c Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Mon, 18 Jun 2018 18:09:36 +0200 Subject: iio: imu: inv_mpu6050: Fix probe() failure on older ACPI based machines Commit 5ec6486daa98 ("iio:imu: inv_mpu6050: support more interrupt types") causes inv_mpu_core_probe() to fail if the IRQ does not have a trigger-type setup. This happens on machines where the mpu6050 is enumerated through ACPI and an older Interrupt type ACPI resource is used for the interrupt, rather then a GpioInt type type, causing the mpu6050 driver to no longer work there. This happens on e.g. the Asus T100TA. This commits makes the mpu6050 fallback to the old IRQF_TRIGGER_RISING default if the irq-type is not setup, fixing this. Signed-off-by: Hans de Goede Fixes: 5ec6486daa98 ("iio:imu: inv_mpu6050: support more interrupt types") Reviewed-by: Martin Kelly Reviewed-by: Jean-Baptiste Maneyrol Signed-off-by: Jonathan Cameron --- drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c index f9c0624505a2..42618fe4f83e 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c @@ -959,6 +959,8 @@ int inv_mpu_core_probe(struct regmap *regmap, int irq, const char *name, } irq_type = irqd_get_trigger_type(desc); + if (!irq_type) + irq_type = IRQF_TRIGGER_RISING; if (irq_type == IRQF_TRIGGER_RISING) st->irq_mask = INV_MPU6050_ACTIVE_HIGH; else if (irq_type == IRQF_TRIGGER_FALLING) -- cgit v1.2.3 From 662d855c66c0a7400f9117b6ac02047942cd1d22 Mon Sep 17 00:00:00 2001 From: Paul Burton Date: Sun, 24 Jun 2018 09:33:22 -0700 Subject: MIPS: Add ksig argument to rseq_{signal_deliver,handle_notify_resume} Commit 784e0300fe9f ("rseq: Avoid infinite recursion when delivering SIGSEGV") added a new ksig argument to the rseq_signal_deliver() & rseq_handle_notify_resume() functions, and was merged in v4.18-rc2. Meanwhile MIPS support for restartable sequences was also merged in v4.18-rc2 with commit 9ea141ad5471 ("MIPS: Add support for restartable sequences"), and therefore didn't get updated for the API change. This results in build failures like the following: CC arch/mips/kernel/signal.o arch/mips/kernel/signal.c: In function 'handle_signal': arch/mips/kernel/signal.c:804:22: error: passing argument 1 of 'rseq_signal_deliver' from incompatible pointer type [-Werror=incompatible-pointer-types] rseq_signal_deliver(regs); ^~~~ In file included from ./include/linux/context_tracking.h:5, from arch/mips/kernel/signal.c:12: ./include/linux/sched.h:1811:56: note: expected 'struct ksignal *' but argument is of type 'struct pt_regs *' static inline void rseq_signal_deliver(struct ksignal *ksig, ~~~~~~~~~~~~~~~~^~~~ arch/mips/kernel/signal.c:804:2: error: too few arguments to function 'rseq_signal_deliver' rseq_signal_deliver(regs); ^~~~~~~~~~~~~~~~~~~ Fix this by adding the ksig argument as was done for other architectures in commit 784e0300fe9f ("rseq: Avoid infinite recursion when delivering SIGSEGV"). Signed-off-by: Paul Burton Acked-by: Mathieu Desnoyers Patchwork: https://patchwork.linux-mips.org/patch/19603/ Cc: James Hogan Cc: Ralf Baechle Cc: Peter Zijlstra Cc: Paul E. McKenney Cc: Boqun Feng Cc: Will Deacon Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org --- arch/mips/kernel/signal.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/mips/kernel/signal.c b/arch/mips/kernel/signal.c index 00f2535d2226..0a9cfe7a0372 100644 --- a/arch/mips/kernel/signal.c +++ b/arch/mips/kernel/signal.c @@ -801,7 +801,7 @@ static void handle_signal(struct ksignal *ksig, struct pt_regs *regs) regs->regs[0] = 0; /* Don't deal with this again. */ } - rseq_signal_deliver(regs); + rseq_signal_deliver(ksig, regs); if (sig_uses_siginfo(&ksig->ka, abi)) ret = abi->setup_rt_frame(vdso + abi->vdso->off_rt_sigreturn, @@ -870,7 +870,7 @@ asmlinkage void do_notify_resume(struct pt_regs *regs, void *unused, if (thread_info_flags & _TIF_NOTIFY_RESUME) { clear_thread_flag(TIF_NOTIFY_RESUME); tracehook_notify_resume(regs); - rseq_handle_notify_resume(regs); + rseq_handle_notify_resume(NULL, regs); } user_enter(); -- cgit v1.2.3 From 10ee25268e1f8475905e1deb85bb83627dca561e Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" Date: Thu, 21 Jun 2018 23:26:55 -0700 Subject: xfs: allow empty transactions while frozen In commit e89c041338ed6ef ("xfs: implement the GETFSMAP ioctl") we created the ability to obtain empty transactions. These transactions have no log or block reservations and therefore can't modify anything. Since they're also NO_WRITECOUNT they can run while the fs is frozen, so we don't need to WARN_ON about that usage. Signed-off-by: Darrick J. Wong Reviewed-by: Allison Henderson Reviewed-by: Christoph Hellwig --- fs/xfs/xfs_trans.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/fs/xfs/xfs_trans.c b/fs/xfs/xfs_trans.c index e040af120b69..524f543c5b82 100644 --- a/fs/xfs/xfs_trans.c +++ b/fs/xfs/xfs_trans.c @@ -258,7 +258,12 @@ xfs_trans_alloc( if (!(flags & XFS_TRANS_NO_WRITECOUNT)) sb_start_intwrite(mp->m_super); - WARN_ON(mp->m_super->s_writers.frozen == SB_FREEZE_COMPLETE); + /* + * Zero-reservation ("empty") transactions can't modify anything, so + * they're allowed to run while we're frozen. + */ + WARN_ON(resp->tr_logres > 0 && + mp->m_super->s_writers.frozen == SB_FREEZE_COMPLETE); atomic_inc(&mp->m_active_trans); tp = kmem_zone_zalloc(xfs_trans_zone, -- cgit v1.2.3 From aafe12cee0b132824f5187987f8a3fb704b9f685 Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" Date: Thu, 21 Jun 2018 23:26:56 -0700 Subject: xfs: don't trip over negative free space in xfs_reserve_blocks If we somehow end up with a filesystem that has fewer free blocks than the blocks set aside to avoid ENOSPC deadlocks, it's possible that the free space calculation in xfs_reserve_blocks will spit out a negative number (because percpu_counter_sum returns s64). We fail to notice this negative number and set fdblks_delta to it. Now we increment fdblocks(!) and the unsigned type of m_resblks means that we end up setting a ridiculously huge m_resblks reservation. Avoid this comedy of errors by detecting the negative free space and returning -ENOSPC. Signed-off-by: Darrick J. Wong Reviewed-by: Allison Henderson Reviewed-by: Christoph Hellwig --- fs/xfs/xfs_fsops.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/xfs/xfs_fsops.c b/fs/xfs/xfs_fsops.c index a7afcad6b711..3f2bd6032cf8 100644 --- a/fs/xfs/xfs_fsops.c +++ b/fs/xfs/xfs_fsops.c @@ -387,7 +387,7 @@ xfs_reserve_blocks( do { free = percpu_counter_sum(&mp->m_fdblocks) - mp->m_alloc_set_aside; - if (!free) + if (free <= 0) break; delta = request - mp->m_resblks; -- cgit v1.2.3 From f62cb48e43195f66c7a40bbfcf11531fc1ff8999 Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" Date: Thu, 21 Jun 2018 23:26:57 -0700 Subject: xfs: don't allow insert-range to shift extents past the maximum offset Zorro Lang reports that generic/485 blows an assert on a filesystem with 512 byte blocks. The test tries to fallocate a post-eof extent at the maximum file size and calls insert range to shift the extents right by two blocks. On a 512b block filesystem this causes startoff to overflow the 54-bit startoff field, leading to the assert. Therefore, always check the rightmost extent to see if it would overflow prior to invoking the insert range machinery. Reported-by: zlang@redhat.com Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=200137 Signed-off-by: Darrick J. Wong Reviewed-by: Allison Henderson Reviewed-by: Christoph Hellwig --- fs/xfs/libxfs/xfs_bmap.c | 26 ++++++++++++++++++++++++++ fs/xfs/libxfs/xfs_bmap.h | 2 ++ fs/xfs/libxfs/xfs_format.h | 2 ++ fs/xfs/xfs_bmap_util.c | 4 ++++ 4 files changed, 34 insertions(+) diff --git a/fs/xfs/libxfs/xfs_bmap.c b/fs/xfs/libxfs/xfs_bmap.c index 01628f0c9a0c..7205268b30bc 100644 --- a/fs/xfs/libxfs/xfs_bmap.c +++ b/fs/xfs/libxfs/xfs_bmap.c @@ -5780,6 +5780,32 @@ del_cursor: return error; } +/* Make sure we won't be right-shifting an extent past the maximum bound. */ +int +xfs_bmap_can_insert_extents( + struct xfs_inode *ip, + xfs_fileoff_t off, + xfs_fileoff_t shift) +{ + struct xfs_bmbt_irec got; + int is_empty; + int error = 0; + + ASSERT(xfs_isilocked(ip, XFS_IOLOCK_EXCL)); + + if (XFS_FORCED_SHUTDOWN(ip->i_mount)) + return -EIO; + + xfs_ilock(ip, XFS_ILOCK_EXCL); + error = xfs_bmap_last_extent(NULL, ip, XFS_DATA_FORK, &got, &is_empty); + if (!error && !is_empty && got.br_startoff >= off && + ((got.br_startoff + shift) & BMBT_STARTOFF_MASK) < got.br_startoff) + error = -EINVAL; + xfs_iunlock(ip, XFS_ILOCK_EXCL); + + return error; +} + int xfs_bmap_insert_extents( struct xfs_trans *tp, diff --git a/fs/xfs/libxfs/xfs_bmap.h b/fs/xfs/libxfs/xfs_bmap.h index 99dddbd0fcc6..9b49ddf99c41 100644 --- a/fs/xfs/libxfs/xfs_bmap.h +++ b/fs/xfs/libxfs/xfs_bmap.h @@ -227,6 +227,8 @@ int xfs_bmap_collapse_extents(struct xfs_trans *tp, struct xfs_inode *ip, xfs_fileoff_t *next_fsb, xfs_fileoff_t offset_shift_fsb, bool *done, xfs_fsblock_t *firstblock, struct xfs_defer_ops *dfops); +int xfs_bmap_can_insert_extents(struct xfs_inode *ip, xfs_fileoff_t off, + xfs_fileoff_t shift); int xfs_bmap_insert_extents(struct xfs_trans *tp, struct xfs_inode *ip, xfs_fileoff_t *next_fsb, xfs_fileoff_t offset_shift_fsb, bool *done, xfs_fileoff_t stop_fsb, xfs_fsblock_t *firstblock, diff --git a/fs/xfs/libxfs/xfs_format.h b/fs/xfs/libxfs/xfs_format.h index 7b4a43deb83e..059bc44c27e8 100644 --- a/fs/xfs/libxfs/xfs_format.h +++ b/fs/xfs/libxfs/xfs_format.h @@ -1529,6 +1529,8 @@ typedef struct xfs_bmdr_block { #define BMBT_STARTBLOCK_BITLEN 52 #define BMBT_BLOCKCOUNT_BITLEN 21 +#define BMBT_STARTOFF_MASK ((1ULL << BMBT_STARTOFF_BITLEN) - 1) + typedef struct xfs_bmbt_rec { __be64 l0, l1; } xfs_bmbt_rec_t; diff --git a/fs/xfs/xfs_bmap_util.c b/fs/xfs/xfs_bmap_util.c index c195b9d857af..bb417156e3bf 100644 --- a/fs/xfs/xfs_bmap_util.c +++ b/fs/xfs/xfs_bmap_util.c @@ -1383,6 +1383,10 @@ xfs_insert_file_space( trace_xfs_insert_file_space(ip); + error = xfs_bmap_can_insert_extents(ip, stop_fsb, shift_fsb); + if (error) + return error; + error = xfs_prepare_shift(ip, offset); if (error) return error; -- cgit v1.2.3 From 5bd88d153998c1b189fdeb8b8bd4cce36b5acf62 Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" Date: Thu, 21 Jun 2018 23:26:57 -0700 Subject: xfs: recheck reflink state after grabbing ILOCK_SHARED for a write The reflink iflag could have changed since the earlier unlocked check, so if we got ILOCK_SHARED for a write and but we're now a reflink inode we have to switch to ILOCK_EXCL and relock. This helps us avoid blowing lock assertions in things like generic/166: XFS: Assertion failed: xfs_isilocked(ip, XFS_ILOCK_EXCL), file: fs/xfs/xfs_reflink.c, line: 383 WARNING: CPU: 1 PID: 24707 at fs/xfs/xfs_message.c:104 assfail+0x25/0x30 [xfs] Modules linked in: deadline_iosched dm_snapshot dm_bufio ext4 mbcache jbd2 dm_flakey xfs libcrc32c dax_pmem device_dax nd_pmem sch_fq_codel af_packet [last unloaded: scsi_debug] CPU: 1 PID: 24707 Comm: xfs_io Not tainted 4.18.0-rc1-djw #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.10.2-1ubuntu1 04/01/2014 RIP: 0010:assfail+0x25/0x30 [xfs] Code: ff 0f 0b c3 90 66 66 66 66 90 48 89 f1 41 89 d0 48 c7 c6 e8 ef 1b a0 48 89 fa 31 ff e8 54 f9 ff ff 80 3d fd ba 0f 00 00 75 03 <0f> 0b c3 0f 0b 66 0f 1f 44 00 00 66 66 66 66 90 48 63 f6 49 89 f9 RSP: 0018:ffffc90006423ad8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff880030b65e80 RCX: 0000000000000000 RDX: 00000000ffffffc0 RSI: 000000000000000a RDI: ffffffffa01b0447 RBP: ffffc90006423c10 R08: 0000000000000000 R09: 0000000000000000 R10: ffff88003d43fc30 R11: f000000000000000 R12: ffff880077cda000 R13: 0000000000000000 R14: ffffc90006423c30 R15: ffffc90006423bf9 FS: 00007feba8986800(0000) GS:ffff88003ec00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000138ab58 CR3: 000000003d40a000 CR4: 00000000000006a0 Call Trace: xfs_reflink_allocate_cow+0x24c/0x3d0 [xfs] xfs_file_iomap_begin+0x6d2/0xeb0 [xfs] ? iomap_to_fiemap+0x80/0x80 iomap_apply+0x5e/0x130 iomap_dio_rw+0x2e0/0x400 ? iomap_to_fiemap+0x80/0x80 ? xfs_file_dio_aio_write+0x133/0x4a0 [xfs] xfs_file_dio_aio_write+0x133/0x4a0 [xfs] xfs_file_write_iter+0x7b/0xb0 [xfs] __vfs_write+0x16f/0x1f0 vfs_write+0xc8/0x1c0 ksys_pwrite64+0x74/0x90 do_syscall_64+0x56/0x180 entry_SYSCALL_64_after_hwframe+0x49/0xbe Signed-off-by: Darrick J. Wong Reviewed-by: Christoph Hellwig --- fs/xfs/xfs_iomap.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) diff --git a/fs/xfs/xfs_iomap.c b/fs/xfs/xfs_iomap.c index 49f5492eed3b..55876dd02f0c 100644 --- a/fs/xfs/xfs_iomap.c +++ b/fs/xfs/xfs_iomap.c @@ -963,12 +963,13 @@ xfs_ilock_for_iomap( unsigned *lockmode) { unsigned mode = XFS_ILOCK_SHARED; + bool is_write = flags & (IOMAP_WRITE | IOMAP_ZERO); /* * COW writes may allocate delalloc space or convert unwritten COW * extents, so we need to make sure to take the lock exclusively here. */ - if (xfs_is_reflink_inode(ip) && (flags & (IOMAP_WRITE | IOMAP_ZERO))) { + if (xfs_is_reflink_inode(ip) && is_write) { /* * FIXME: It could still overwrite on unshared extents and not * need allocation. @@ -989,6 +990,7 @@ xfs_ilock_for_iomap( mode = XFS_ILOCK_EXCL; } +relock: if (flags & IOMAP_NOWAIT) { if (!xfs_ilock_nowait(ip, mode)) return -EAGAIN; @@ -996,6 +998,17 @@ xfs_ilock_for_iomap( xfs_ilock(ip, mode); } + /* + * The reflink iflag could have changed since the earlier unlocked + * check, so if we got ILOCK_SHARED for a write and but we're now a + * reflink inode we have to switch to ILOCK_EXCL and relock. + */ + if (mode == XFS_ILOCK_SHARED && is_write && xfs_is_reflink_inode(ip)) { + xfs_iunlock(ip, mode); + mode = XFS_ILOCK_EXCL; + goto relock; + } + *lockmode = mode; return 0; } -- cgit v1.2.3 From 232d0a24b0fc197c50e95fe65f236027b5fa1b74 Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" Date: Thu, 21 Jun 2018 23:26:57 -0700 Subject: xfs: fix uninitialized field in rtbitmap fsmap backend Initialize the extent count field of the high key so that when we use the high key to synthesize an 'unknown owner' record (i.e. used space record) at the end of the queried range we have a field with which to compute rm_blockcount. This is not strictly necessary because the synthesizer never uses the rm_blockcount field, but we can shut up the static code analysis anyway. Coverity-id: 1437358 Signed-off-by: Darrick J. Wong Reviewed-by: Allison Henderson Reviewed-by: Christoph Hellwig --- fs/xfs/xfs_fsmap.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/xfs/xfs_fsmap.c b/fs/xfs/xfs_fsmap.c index c34fa9c342f2..c7157bc48bd1 100644 --- a/fs/xfs/xfs_fsmap.c +++ b/fs/xfs/xfs_fsmap.c @@ -513,8 +513,8 @@ xfs_getfsmap_rtdev_rtbitmap_query( struct xfs_trans *tp, struct xfs_getfsmap_info *info) { - struct xfs_rtalloc_rec alow; - struct xfs_rtalloc_rec ahigh; + struct xfs_rtalloc_rec alow = { 0 }; + struct xfs_rtalloc_rec ahigh = { 0 }; int error; xfs_ilock(tp->t_mountp->m_rbmip, XFS_ILOCK_SHARED); -- cgit v1.2.3 From a3a374bf1889b1b401b25e6aada3ca4151a99d15 Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" Date: Thu, 21 Jun 2018 23:26:58 -0700 Subject: xfs: fix off-by-one error in xfs_rtalloc_query_range In commit 8ad560d2565e6 ("xfs: strengthen rtalloc query range checks") we strengthened the input parameter checks in the rtbitmap range query function, but introduced an off-by-one error in the process. The call to xfs_rtfind_forw deals with the high key being rextents, but we clamp the high key to rextents - 1. This causes the returned results to stop one block short of the end of the rtdev, which is incorrect. Signed-off-by: Darrick J. Wong Reviewed-by: Allison Henderson Reviewed-by: Christoph Hellwig --- fs/xfs/libxfs/xfs_rtbitmap.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/xfs/libxfs/xfs_rtbitmap.c b/fs/xfs/libxfs/xfs_rtbitmap.c index 65fc4ed2e9a1..b228c821bae6 100644 --- a/fs/xfs/libxfs/xfs_rtbitmap.c +++ b/fs/xfs/libxfs/xfs_rtbitmap.c @@ -1029,8 +1029,8 @@ xfs_rtalloc_query_range( if (low_rec->ar_startext >= mp->m_sb.sb_rextents || low_rec->ar_startext == high_rec->ar_startext) return 0; - if (high_rec->ar_startext >= mp->m_sb.sb_rextents) - high_rec->ar_startext = mp->m_sb.sb_rextents - 1; + if (high_rec->ar_startext > mp->m_sb.sb_rextents) + high_rec->ar_startext = mp->m_sb.sb_rextents; /* Iterate the bitmap, looking for discrepancies. */ rtstart = low_rec->ar_startext; -- cgit v1.2.3 From e53c4b598372001a13901b77649dc1b4afec3e85 Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" Date: Thu, 21 Jun 2018 23:26:58 -0700 Subject: xfs: ensure post-EOF zeroing happens after zeroing part of a file If a user asks us to zero_range part of a file, the end of the range is EOF, and not aligned to a page boundary, invoke writeback of the EOF page to ensure that the post-EOF part of the page is zeroed. This ensures that we don't expose stale memory contents via mmap, if in a clumsy manner. Found by running generic/127 when it runs zero_range and mapread at EOF one after the other. Signed-off-by: Darrick J. Wong Reviewed-by: Christoph Hellwig Reviewed-by: Allison Henderson --- fs/xfs/xfs_bmap_util.c | 17 ++++++++++++++++- 1 file changed, 16 insertions(+), 1 deletion(-) diff --git a/fs/xfs/xfs_bmap_util.c b/fs/xfs/xfs_bmap_util.c index bb417156e3bf..83b1e8c6c18f 100644 --- a/fs/xfs/xfs_bmap_util.c +++ b/fs/xfs/xfs_bmap_util.c @@ -1187,7 +1187,22 @@ xfs_free_file_space( return 0; if (offset + len > XFS_ISIZE(ip)) len = XFS_ISIZE(ip) - offset; - return iomap_zero_range(VFS_I(ip), offset, len, NULL, &xfs_iomap_ops); + error = iomap_zero_range(VFS_I(ip), offset, len, NULL, &xfs_iomap_ops); + if (error) + return error; + + /* + * If we zeroed right up to EOF and EOF straddles a page boundary we + * must make sure that the post-EOF area is also zeroed because the + * page could be mmap'd and iomap_zero_range doesn't do that for us. + * Writeback of the eof page will do this, albeit clumsily. + */ + if (offset + len >= XFS_ISIZE(ip) && ((offset + len) & PAGE_MASK)) { + error = filemap_write_and_wait_range(VFS_I(ip)->i_mapping, + (offset + len) & ~PAGE_MASK, LLONG_MAX); + } + + return error; } /* -- cgit v1.2.3 From d8cb5e42378918e00eda58792f3ab86dd1e7d214 Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" Date: Thu, 21 Jun 2018 23:26:56 -0700 Subject: xfs: fix fdblocks accounting w/ RMAPBT per-AG reservation In __xfs_ag_resv_init we incorrectly calculate the amount by which to decrease fdblocks when reserving blocks for the rmapbt. Because rmapbt allocations do not decrease fdblocks, we must decrease fdblocks by the entire size of the requested reservation in order to achieve our goal of always having enough free blocks to satisfy an rmapbt expansion. This is in contrast to the refcountbt/finobt, which /do/ subtract from fdblocks whenever they allocate a block. For this allocation type we preserve the existing behavior where we decrease fdblocks only by the requested reservation minus the size of the existing tree. This fixes the problem where the available block counts reported by statfs change across a remount if there had been an rmapbt size change since mount time. Signed-off-by: Darrick J. Wong Reviewed-by: Allison Henderson --- fs/xfs/libxfs/xfs_ag_resv.c | 31 +++++++++++++++++++++++++++---- 1 file changed, 27 insertions(+), 4 deletions(-) diff --git a/fs/xfs/libxfs/xfs_ag_resv.c b/fs/xfs/libxfs/xfs_ag_resv.c index 84db76e0e3e3..fecd187fcf2c 100644 --- a/fs/xfs/libxfs/xfs_ag_resv.c +++ b/fs/xfs/libxfs/xfs_ag_resv.c @@ -157,6 +157,7 @@ __xfs_ag_resv_free( error = xfs_mod_fdblocks(pag->pag_mount, oldresv, true); resv->ar_reserved = 0; resv->ar_asked = 0; + resv->ar_orig_reserved = 0; if (error) trace_xfs_ag_resv_free_error(pag->pag_mount, pag->pag_agno, @@ -189,13 +190,34 @@ __xfs_ag_resv_init( struct xfs_mount *mp = pag->pag_mount; struct xfs_ag_resv *resv; int error; - xfs_extlen_t reserved; + xfs_extlen_t hidden_space; if (used > ask) ask = used; - reserved = ask - used; - error = xfs_mod_fdblocks(mp, -(int64_t)reserved, true); + switch (type) { + case XFS_AG_RESV_RMAPBT: + /* + * Space taken by the rmapbt is not subtracted from fdblocks + * because the rmapbt lives in the free space. Here we must + * subtract the entire reservation from fdblocks so that we + * always have blocks available for rmapbt expansion. + */ + hidden_space = ask; + break; + case XFS_AG_RESV_METADATA: + /* + * Space taken by all other metadata btrees are accounted + * on-disk as used space. We therefore only hide the space + * that is reserved but not used by the trees. + */ + hidden_space = ask - used; + break; + default: + ASSERT(0); + return -EINVAL; + } + error = xfs_mod_fdblocks(mp, -(int64_t)hidden_space, true); if (error) { trace_xfs_ag_resv_init_error(pag->pag_mount, pag->pag_agno, error, _RET_IP_); @@ -216,7 +238,8 @@ __xfs_ag_resv_init( resv = xfs_perag_resv(pag, type); resv->ar_asked = ask; - resv->ar_reserved = resv->ar_orig_reserved = reserved; + resv->ar_orig_reserved = hidden_space; + resv->ar_reserved = ask - used; trace_xfs_ag_resv_init(pag, type, ask); return 0; -- cgit v1.2.3 From 1dd2058f902eb2d8bd5bedab0b190a21d5245e71 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 21 Jun 2018 11:06:41 +0300 Subject: cpufreq: qcom-kryo: Fix error handling in probe() We should return if get_cpu_device() fails or it leads to a NULL dereference. Also dev_pm_opp_of_get_opp_desc_node() returns NULL on error, it never returns error pointers. Fixes: 46e2856b8e18 (cpufreq: Add Kryo CPU scaling driver) Signed-off-by: Dan Carpenter Acked-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/qcom-cpufreq-kryo.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/cpufreq/qcom-cpufreq-kryo.c b/drivers/cpufreq/qcom-cpufreq-kryo.c index 01bddacf5c3b..29389accf3e9 100644 --- a/drivers/cpufreq/qcom-cpufreq-kryo.c +++ b/drivers/cpufreq/qcom-cpufreq-kryo.c @@ -87,8 +87,8 @@ static int qcom_cpufreq_kryo_probe(struct platform_device *pdev) int ret; cpu_dev = get_cpu_device(0); - if (NULL == cpu_dev) - ret = -ENODEV; + if (!cpu_dev) + return -ENODEV; msm8996_version = qcom_cpufreq_kryo_get_msm_id(); if (NUM_OF_MSM8996_VERSIONS == msm8996_version) { @@ -97,8 +97,8 @@ static int qcom_cpufreq_kryo_probe(struct platform_device *pdev) } np = dev_pm_opp_of_get_opp_desc_node(cpu_dev); - if (IS_ERR(np)) - return PTR_ERR(np); + if (!np) + return -ENOENT; ret = of_device_is_compatible(np, "operating-points-v2-kryo-cpu"); if (!ret) { -- cgit v1.2.3 From 5e03aa61a7f3cb99852bc3ad6925f5fa3c0dcc93 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Thu, 14 Jun 2018 10:53:34 +0530 Subject: PM / Domains: Fix return value of of_genpd_opp_to_performance_state() of_genpd_opp_to_performance_state() should return 0 for errors, but the dummy routine isn't doing that. Fix it. Signed-off-by: Viresh Kumar Acked-by: Ulf Hansson Signed-off-by: Rafael J. Wysocki --- include/linux/pm_domain.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/pm_domain.h b/include/linux/pm_domain.h index 9206a4fef9ac..139f79c8477a 100644 --- a/include/linux/pm_domain.h +++ b/include/linux/pm_domain.h @@ -276,7 +276,7 @@ static inline unsigned int of_genpd_opp_to_performance_state(struct device *dev, struct device_node *opp_node) { - return -ENODEV; + return 0; } static inline int genpd_dev_pm_attach(struct device *dev) -- cgit v1.2.3 From ad6384ba3ac98ad524194e37de379c1fe503870b Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Wed, 20 Jun 2018 11:45:37 +0530 Subject: PM / Domains: Rename opp_node to np The DT node passed here isn't necessarily an OPP node, as this routine can also be used for cases where the "required-opps" property is present directly in the device's node. Rename it. This also removes a stale comment. Acked-by: Ulf Hansson Signed-off-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- drivers/base/power/domain.c | 7 +++---- include/linux/pm_domain.h | 4 ++-- 2 files changed, 5 insertions(+), 6 deletions(-) diff --git a/drivers/base/power/domain.c b/drivers/base/power/domain.c index 4925af5c4cf0..c298de8a8308 100644 --- a/drivers/base/power/domain.c +++ b/drivers/base/power/domain.c @@ -2487,10 +2487,9 @@ EXPORT_SYMBOL_GPL(of_genpd_parse_idle_states); * power domain corresponding to a DT node's "required-opps" property. * * @dev: Device for which the performance-state needs to be found. - * @opp_node: DT node where the "required-opps" property is present. This can be + * @np: DT node where the "required-opps" property is present. This can be * the device node itself (if it doesn't have an OPP table) or a node * within the OPP table of a device (if device has an OPP table). - * @state: Pointer to return performance state. * * Returns performance state corresponding to the "required-opps" property of * a DT node. This calls platform specific genpd->opp_to_performance_state() @@ -2499,7 +2498,7 @@ EXPORT_SYMBOL_GPL(of_genpd_parse_idle_states); * Returns performance state on success and 0 on failure. */ unsigned int of_genpd_opp_to_performance_state(struct device *dev, - struct device_node *opp_node) + struct device_node *np) { struct generic_pm_domain *genpd; struct dev_pm_opp *opp; @@ -2514,7 +2513,7 @@ unsigned int of_genpd_opp_to_performance_state(struct device *dev, genpd_lock(genpd); - opp = of_dev_pm_opp_find_required_opp(&genpd->dev, opp_node); + opp = of_dev_pm_opp_find_required_opp(&genpd->dev, np); if (IS_ERR(opp)) { dev_err(dev, "Failed to find required OPP: %ld\n", PTR_ERR(opp)); diff --git a/include/linux/pm_domain.h b/include/linux/pm_domain.h index 139f79c8477a..cb8d84090cfb 100644 --- a/include/linux/pm_domain.h +++ b/include/linux/pm_domain.h @@ -234,7 +234,7 @@ struct generic_pm_domain *of_genpd_remove_last(struct device_node *np); int of_genpd_parse_idle_states(struct device_node *dn, struct genpd_power_state **states, int *n); unsigned int of_genpd_opp_to_performance_state(struct device *dev, - struct device_node *opp_node); + struct device_node *np); int genpd_dev_pm_attach(struct device *dev); struct device *genpd_dev_pm_attach_by_id(struct device *dev, @@ -274,7 +274,7 @@ static inline int of_genpd_parse_idle_states(struct device_node *dn, static inline unsigned int of_genpd_opp_to_performance_state(struct device *dev, - struct device_node *opp_node) + struct device_node *np) { return 0; } -- cgit v1.2.3 From e41fc8c5bd41b96bfae5ce4c66bee6edabc932e8 Mon Sep 17 00:00:00 2001 From: Hui Wang Date: Mon, 25 Jun 2018 14:40:56 +0800 Subject: ALSA: hda/realtek - Fix the problem of two front mics on more machines We have 3 more Lenovo machines, they all have 2 front mics on them, so they need the fixup to change the location for one of two mics. Among these 3 Lenovo machines, one of them has the same pin cfg as the machine with subid 0x17aa3138, so use the pin cfg table to apply fixup for them. The rest machines don't share the same pin cfg, so far use the subid to apply fixup for them. Fixes: a3dafb2200bf ("ALSA: hda/realtek - adjust the location of one mic") Cc: Signed-off-by: Hui Wang Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 70bf4c30548a..5ad6c7e5f92e 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -6610,8 +6610,9 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x17aa, 0x30bb, "ThinkCentre AIO", ALC233_FIXUP_LENOVO_LINE2_MIC_HOTKEY), SND_PCI_QUIRK(0x17aa, 0x30e2, "ThinkCentre AIO", ALC233_FIXUP_LENOVO_LINE2_MIC_HOTKEY), SND_PCI_QUIRK(0x17aa, 0x310c, "ThinkCentre Station", ALC294_FIXUP_LENOVO_MIC_LOCATION), + SND_PCI_QUIRK(0x17aa, 0x312a, "ThinkCentre Station", ALC294_FIXUP_LENOVO_MIC_LOCATION), SND_PCI_QUIRK(0x17aa, 0x312f, "ThinkCentre Station", ALC294_FIXUP_LENOVO_MIC_LOCATION), - SND_PCI_QUIRK(0x17aa, 0x3138, "ThinkCentre Station", ALC294_FIXUP_LENOVO_MIC_LOCATION), + SND_PCI_QUIRK(0x17aa, 0x3136, "ThinkCentre Station", ALC294_FIXUP_LENOVO_MIC_LOCATION), SND_PCI_QUIRK(0x17aa, 0x313c, "ThinkCentre Station", ALC294_FIXUP_LENOVO_MIC_LOCATION), SND_PCI_QUIRK(0x17aa, 0x3902, "Lenovo E50-80", ALC269_FIXUP_DMIC_THINKPAD_ACPI), SND_PCI_QUIRK(0x17aa, 0x3977, "IdeaPad S210", ALC283_FIXUP_INT_MIC), @@ -6789,6 +6790,12 @@ static const struct snd_hda_pin_quirk alc269_pin_fixup_tbl[] = { {0x14, 0x90170110}, {0x19, 0x02a11030}, {0x21, 0x02211020}), + SND_HDA_PIN_QUIRK(0x10ec0235, 0x17aa, "Lenovo", ALC294_FIXUP_LENOVO_MIC_LOCATION, + {0x14, 0x90170110}, + {0x19, 0x02a11030}, + {0x1a, 0x02a11040}, + {0x1b, 0x01014020}, + {0x21, 0x0221101f}), SND_HDA_PIN_QUIRK(0x10ec0236, 0x1028, "Dell", ALC255_FIXUP_DELL1_MIC_NO_PRESENCE, {0x12, 0x90a60140}, {0x14, 0x90170110}, -- cgit v1.2.3 From b41f794f284966fd6ec634111e3b40d241389f96 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 25 Jun 2018 11:09:11 +0200 Subject: ALSA: timer: Fix UBSAN warning at SNDRV_TIMER_IOCTL_NEXT_DEVICE ioctl The kernel may spew a WARNING about UBSAN undefined behavior at handling ALSA timer ioctl SNDRV_TIMER_IOCTL_NEXT_DEVICE: UBSAN: Undefined behaviour in sound/core/timer.c:1524:19 signed integer overflow: 2147483647 + 1 cannot be represented in type 'int' Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x122/0x1c8 lib/dump_stack.c:113 ubsan_epilogue+0x12/0x86 lib/ubsan.c:159 handle_overflow+0x1c2/0x21f lib/ubsan.c:190 __ubsan_handle_add_overflow+0x2a/0x31 lib/ubsan.c:198 snd_timer_user_next_device sound/core/timer.c:1524 [inline] __snd_timer_user_ioctl+0x204d/0x2520 sound/core/timer.c:1939 snd_timer_user_ioctl+0x67/0x95 sound/core/timer.c:1994 .... It happens only when a value with INT_MAX is passed, as we're incrementing it unconditionally. So the fix is trivial, check the value with INT_MAX. Although the bug itself is fairly harmless, it's better to fix it so that fuzzers won't hit this again later. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=200213 Reported-and-tested-by: Team OWL337 Cc: Signed-off-by: Takashi Iwai --- sound/core/timer.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/core/timer.c b/sound/core/timer.c index 665089c45560..b6f076bbc72d 100644 --- a/sound/core/timer.c +++ b/sound/core/timer.c @@ -1520,7 +1520,7 @@ static int snd_timer_user_next_device(struct snd_timer_id __user *_tid) } else { if (id.subdevice < 0) id.subdevice = 0; - else + else if (id.subdevice < INT_MAX) id.subdevice++; } } -- cgit v1.2.3 From c9a4c63888dbb79ce4d068ca1dd8b05bc3f156b1 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 25 Jun 2018 11:13:59 +0200 Subject: ALSA: seq: Fix UBSAN warning at SNDRV_SEQ_IOCTL_QUERY_NEXT_CLIENT ioctl The kernel may spew a WARNING with UBSAN undefined behavior at handling ALSA sequencer ioctl SNDRV_SEQ_IOCTL_QUERY_NEXT_CLIENT: UBSAN: Undefined behaviour in sound/core/seq/seq_clientmgr.c:2007:14 signed integer overflow: 2147483647 + 1 cannot be represented in type 'int' Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x122/0x1c8 lib/dump_stack.c:113 ubsan_epilogue+0x12/0x86 lib/ubsan.c:159 handle_overflow+0x1c2/0x21f lib/ubsan.c:190 __ubsan_handle_add_overflow+0x2a/0x31 lib/ubsan.c:198 snd_seq_ioctl_query_next_client+0x1ac/0x1d0 sound/core/seq/seq_clientmgr.c:2007 snd_seq_ioctl+0x264/0x3d0 sound/core/seq/seq_clientmgr.c:2144 .... It happens only when INT_MAX is passed there, as we're incrementing it unconditionally. So the fix is trivial, check the value with INT_MAX. Although the bug itself is fairly harmless, it's better to fix it so that fuzzers won't hit this again later. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=200211 Signed-off-by: Takashi Iwai --- sound/core/seq/seq_clientmgr.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/sound/core/seq/seq_clientmgr.c b/sound/core/seq/seq_clientmgr.c index 61a07fe34cd2..56ca78423040 100644 --- a/sound/core/seq/seq_clientmgr.c +++ b/sound/core/seq/seq_clientmgr.c @@ -2004,7 +2004,8 @@ static int snd_seq_ioctl_query_next_client(struct snd_seq_client *client, struct snd_seq_client *cptr = NULL; /* search for next client */ - info->client++; + if (info->client < INT_MAX) + info->client++; if (info->client < 0) info->client = 0; for (; info->client < SNDRV_SEQ_MAX_CLIENTS; info->client++) { -- cgit v1.2.3 From 68d676a089625daed9d61df56ac63b5cd7189efe Mon Sep 17 00:00:00 2001 From: Jakub Kicinski Date: Fri, 22 Jun 2018 11:56:56 -0700 Subject: nfp: bpf: don't stop offload if replace failed Stopping offload completely if replace of program failed dates back to days of transparent offload. Back then we wanted to silently fall back to the in-driver processing. Today we mark programs for offload when they are loaded into the kernel, so the transparent offload is no longer a reality. Flags check in the driver will only allow replace of a driver program with another driver program or an offload program with another offload program. When driver program is replaced stopping offload is a no-op, because driver program isn't offloaded. When replacing offloaded program if the offload fails the entire operation will fail all the way back to user space and we should continue using the old program. IOW when replacing a driver program stopping offload is unnecessary and when replacing offloaded program - it's a bug, old program should continue to run. In practice this bug would mean that if offload operation was to fail (either due to FW communication error, kernel OOM or new program being offloaded but for a different netdev) driver would continue reporting that previous XDP program is offloaded but in fact no program will be loaded in hardware. The failure is fairly unlikely (found by inspection, when working on the code) but it's unpleasant. Backport note: even though the bug was introduced in commit cafa92ac2553 ("nfp: bpf: add support for XDP_FLAGS_HW_MODE"), this fix depends on commit 441a33031fe5 ("net: xdp: don't allow device-bound programs in driver mode"), so this fix is sufficient only in v4.15 or newer. Kernels v4.13.x and v4.14.x do need to stop offload if it was transparent/opportunistic, i.e. if XDP_FLAGS_HW_MODE was not set on running program. Fixes: cafa92ac2553 ("nfp: bpf: add support for XDP_FLAGS_HW_MODE") Signed-off-by: Jakub Kicinski Reviewed-by: Quentin Monnet Acked-by: Song Liu Signed-off-by: Daniel Borkmann --- drivers/net/ethernet/netronome/nfp/bpf/main.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/netronome/nfp/bpf/main.c b/drivers/net/ethernet/netronome/nfp/bpf/main.c index fcdfb8e7fdea..7184af94aa53 100644 --- a/drivers/net/ethernet/netronome/nfp/bpf/main.c +++ b/drivers/net/ethernet/netronome/nfp/bpf/main.c @@ -81,10 +81,10 @@ nfp_bpf_xdp_offload(struct nfp_app *app, struct nfp_net *nn, ret = nfp_net_bpf_offload(nn, prog, running, extack); /* Stop offload if replace not possible */ - if (ret && prog) - nfp_bpf_xdp_offload(app, nn, NULL, extack); + if (ret) + return ret; - nn->dp.bpf_offload_xdp = prog && !ret; + nn->dp.bpf_offload_xdp = !!prog; return ret; } -- cgit v1.2.3 From 043f891b70e6197bc181f3b087c2bd04c60fddd2 Mon Sep 17 00:00:00 2001 From: Petr Mladek Date: Mon, 25 Jun 2018 13:28:06 +0200 Subject: Revert "lib/test_printf.c: call wait_for_random_bytes() before plain %p tests" This reverts commit ee410f15b1418f2f4428e79980674c979081bcb7. It might prevent the machine from boot. It would wait for enough randomness at the very beginning of kernel_init(). But there is basically nothing running in parallel that would help to produce any randomness. Reported-by: Steven Rostedt (VMware) Signed-off-by: Petr Mladek --- lib/test_printf.c | 7 ------- 1 file changed, 7 deletions(-) diff --git a/lib/test_printf.c b/lib/test_printf.c index b2aa8f514844..cea592f402ed 100644 --- a/lib/test_printf.c +++ b/lib/test_printf.c @@ -260,13 +260,6 @@ plain(void) { int err; - /* - * Make sure crng is ready. Otherwise we get "(ptrval)" instead - * of a hashed address when printing '%p' in plain_hash() and - * plain_format(). - */ - wait_for_random_bytes(); - err = plain_hash(); if (err) { pr_warn("plain 'p' does not appear to be hashed\n"); -- cgit v1.2.3 From 560b423dd9af4272a1f3685c2d6b073fdc4af7c7 Mon Sep 17 00:00:00 2001 From: Stafford Horne Date: Mon, 18 Jun 2018 06:52:58 +0900 Subject: openrisc: Call destructor during __pte_free_tlb This fixes an issue uncovered when a recent change to add the "page table" flag was merged. During bootup we see many errors like the following: BUG: Bad page state in process mkdir pfn:00bae page:c1ff15c0 count:0 mapcount:-1024 mapping:00000000 index:0x0 flags: 0x0() raw: 00000000 00000000 00000000 fffffbff 00000000 00000100 00000200 00000000 page dumped because: nonzero mapcount Modules linked in: CPU: 0 PID: 46 Comm: mkdir Tainted: G B 4.17.0-simple-smp-07461-g1d40a5ea01d5-dirty #993 Call trace: [<(ptrval)>] show_stack+0x44/0x54 [<(ptrval)>] dump_stack+0xb0/0xe8 [<(ptrval)>] bad_page+0x138/0x174 [<(ptrval)>] ? cpumask_next+0x24/0x34 [<(ptrval)>] free_pages_check_bad+0x6c/0xd0 [<(ptrval)>] free_pcppages_bulk+0x174/0x42c [<(ptrval)>] free_unref_page_commit.isra.17+0xb8/0xc8 [<(ptrval)>] free_unref_page_list+0x10c/0x190 [<(ptrval)>] ? set_reset_devices+0x0/0x2c [<(ptrval)>] release_pages+0x3a0/0x414 [<(ptrval)>] tlb_flush_mmu_free+0x5c/0x90 [<(ptrval)>] tlb_flush_mmu+0x90/0xa4 [<(ptrval)>] arch_tlb_finish_mmu+0x50/0x94 [<(ptrval)>] tlb_finish_mmu+0x30/0x64 [<(ptrval)>] exit_mmap+0x110/0x1e0 [<(ptrval)>] mmput+0x50/0xf0 [<(ptrval)>] do_exit+0x274/0xa94 [<(ptrval)>] do_group_exit+0x50/0x110 [<(ptrval)>] __wake_up_parent+0x0/0x38 [<(ptrval)>] _syscall_return+0x0/0x4 During the __pte_free_tlb path openrisc fails to call the page destructor which would clear the new bits that were introduced. To fix this we are calling the destructor. It seem openrisc was the only architecture missing this, all other architectures either call the destructor like we are doing here or use pte_free. Note: failing to call the destructor was also messing up the zone stats (and will be cause other problems if you were using SPLIT_PTE_PTLOCKS, which we are not yet). Fixes: 1d40a5ea01d53 ("mm: mark pages in use for page tables") Acked-by: Matthew Wilcox Signed-off-by: Stafford Horne --- arch/openrisc/include/asm/pgalloc.h | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/arch/openrisc/include/asm/pgalloc.h b/arch/openrisc/include/asm/pgalloc.h index 3e1a46615120..8999b9226512 100644 --- a/arch/openrisc/include/asm/pgalloc.h +++ b/arch/openrisc/include/asm/pgalloc.h @@ -98,8 +98,12 @@ static inline void pte_free(struct mm_struct *mm, struct page *pte) __free_page(pte); } +#define __pte_free_tlb(tlb, pte, addr) \ +do { \ + pgtable_page_dtor(pte); \ + tlb_remove_page((tlb), (pte)); \ +} while (0) -#define __pte_free_tlb(tlb, pte, addr) tlb_remove_page((tlb), (pte)) #define pmd_pgtable(pmd) pmd_page(pmd) #define check_pgt_cache() do { } while (0) -- cgit v1.2.3 From 229bc19fd7aca4f37964af06e3583c1c8f36b5d6 Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Thu, 21 Jun 2018 16:19:41 +0300 Subject: xhci: Fix perceived dead host due to runtime suspend race with event handler Don't rely on event interrupt (EINT) bit alone to detect pending port change in resume. If no change event is detected the host may be suspended again, oterwise roothubs are resumed. There is a lag in xHC setting EINT. If we don't notice the pending change in resume, and the controller is runtime suspeded again, it causes the event handler to assume host is dead as it will fail to read xHC registers once PCI puts the controller to D3 state. [ 268.520969] xhci_hcd: xhci_resume: starting port polling. [ 268.520985] xhci_hcd: xhci_hub_status_data: stopping port polling. [ 268.521030] xhci_hcd: xhci_suspend: stopping port polling. [ 268.521040] xhci_hcd: // Setting command ring address to 0x349bd001 [ 268.521139] xhci_hcd: Port Status Change Event for port 3 [ 268.521149] xhci_hcd: resume root hub [ 268.521163] xhci_hcd: port resume event for port 3 [ 268.521168] xhci_hcd: xHC is not running. [ 268.521174] xhci_hcd: handle_port_status: starting port polling. [ 268.596322] xhci_hcd: xhci_hc_died: xHCI host controller not responding, assume dead The EINT lag is described in a additional note in xhci specs 4.19.2: "Due to internal xHC scheduling and system delays, there will be a lag between a change bit being set and the Port Status Change Event that it generated being written to the Event Ring. If SW reads the PORTSC and sees a change bit set, there is no guarantee that the corresponding Port Status Change Event has already been written into the Event Ring." Cc: Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci.c | 40 +++++++++++++++++++++++++++++++++++++--- drivers/usb/host/xhci.h | 4 ++++ 2 files changed, 41 insertions(+), 3 deletions(-) diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 8c8da2d657fa..f11ec61bcc7d 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -908,6 +908,41 @@ static void xhci_disable_port_wake_on_bits(struct xhci_hcd *xhci) spin_unlock_irqrestore(&xhci->lock, flags); } +static bool xhci_pending_portevent(struct xhci_hcd *xhci) +{ + struct xhci_port **ports; + int port_index; + u32 status; + u32 portsc; + + status = readl(&xhci->op_regs->status); + if (status & STS_EINT) + return true; + /* + * Checking STS_EINT is not enough as there is a lag between a change + * bit being set and the Port Status Change Event that it generated + * being written to the Event Ring. See note in xhci 1.1 section 4.19.2. + */ + + port_index = xhci->usb2_rhub.num_ports; + ports = xhci->usb2_rhub.ports; + while (port_index--) { + portsc = readl(ports[port_index]->addr); + if (portsc & PORT_CHANGE_MASK || + (portsc & PORT_PLS_MASK) == XDEV_RESUME) + return true; + } + port_index = xhci->usb3_rhub.num_ports; + ports = xhci->usb3_rhub.ports; + while (port_index--) { + portsc = readl(ports[port_index]->addr); + if (portsc & PORT_CHANGE_MASK || + (portsc & PORT_PLS_MASK) == XDEV_RESUME) + return true; + } + return false; +} + /* * Stop HC (not bus-specific) * @@ -1009,7 +1044,7 @@ EXPORT_SYMBOL_GPL(xhci_suspend); */ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) { - u32 command, temp = 0, status; + u32 command, temp = 0; struct usb_hcd *hcd = xhci_to_hcd(xhci); struct usb_hcd *secondary_hcd; int retval = 0; @@ -1134,8 +1169,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) done: if (retval == 0) { /* Resume root hubs only when have pending events. */ - status = readl(&xhci->op_regs->status); - if (status & STS_EINT) { + if (xhci_pending_portevent(xhci)) { usb_hcd_resume_root_hub(xhci->shared_hcd); usb_hcd_resume_root_hub(hcd); } diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 939e2f86b595..841e89ffe2e9 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -382,6 +382,10 @@ struct xhci_op_regs { #define PORT_PLC (1 << 22) /* port configure error change - port failed to configure its link partner */ #define PORT_CEC (1 << 23) +#define PORT_CHANGE_MASK (PORT_CSC | PORT_PEC | PORT_WRC | PORT_OCC | \ + PORT_RC | PORT_PLC | PORT_CEC) + + /* Cold Attach Status - xHC can set this bit to report device attached during * Sx state. Warm port reset should be perfomed to clear this bit and move port * to connected state. -- cgit v1.2.3 From d850c1658328e757635a46763783c6fd56390dcb Mon Sep 17 00:00:00 2001 From: Zhengjun Xing Date: Thu, 21 Jun 2018 16:19:42 +0300 Subject: xhci: Fix kernel oops in trace_xhci_free_virt_device commit 44a182b9d177 ("xhci: Fix use-after-free in xhci_free_virt_device") set dev->udev pointer to NULL in xhci_free_dev(), it will cause kernel panic in trace_xhci_free_virt_device. This patch reimplement the trace function trace_xhci_free_virt_device, remove dev->udev dereference and added more useful parameters to show in the trace function,it also makes sure dev->udev is not NULL before calling trace_xhci_free_virt_device. This issue happened when xhci-hcd trace is enabled and USB devices hot plug test. Original use-after-free patch went to stable so this needs so be applied there as well. [ 1092.022457] usb 2-4: USB disconnect, device number 6 [ 1092.092772] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 [ 1092.101694] PGD 0 P4D 0 [ 1092.104601] Oops: 0000 [#1] SMP [ 1092.207734] Workqueue: usb_hub_wq hub_event [ 1092.212507] RIP: 0010:trace_event_raw_event_xhci_log_virt_dev+0x6c/0xf0 [ 1092.220050] RSP: 0018:ffff8c252e883d28 EFLAGS: 00010086 [ 1092.226024] RAX: ffff8c24af86fa84 RBX: 0000000000000003 RCX: ffff8c25255c2a01 [ 1092.234130] RDX: 0000000000000000 RSI: 00000000aef55009 RDI: ffff8c252e883d28 [ 1092.242242] RBP: ffff8c252550e2c0 R08: ffff8c24af86fa84 R09: 0000000000000a70 [ 1092.250364] R10: 0000000000000a70 R11: 0000000000000000 R12: ffff8c251f21a000 [ 1092.258468] R13: 000000000000000c R14: ffff8c251f21a000 R15: ffff8c251f432f60 [ 1092.266572] FS: 0000000000000000(0000) GS:ffff8c252e880000(0000) knlGS:0000000000000000 [ 1092.275757] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1092.282281] CR2: 0000000000000000 CR3: 0000000154209001 CR4: 00000000003606e0 [ 1092.290384] Call Trace: [ 1092.293156] [ 1092.295439] xhci_free_virt_device.part.34+0x182/0x1a0 [ 1092.301288] handle_cmd_completion+0x7ac/0xfa0 [ 1092.306336] ? trace_event_raw_event_xhci_log_trb+0x6e/0xa0 [ 1092.312661] xhci_irq+0x3e8/0x1f60 [ 1092.316524] __handle_irq_event_percpu+0x75/0x180 [ 1092.321876] handle_irq_event_percpu+0x20/0x50 [ 1092.326922] handle_irq_event+0x36/0x60 [ 1092.331273] handle_edge_irq+0x6d/0x180 [ 1092.335644] handle_irq+0x16/0x20 [ 1092.339417] do_IRQ+0x41/0xc0 [ 1092.342782] common_interrupt+0xf/0xf [ 1092.346955] Fixes: 44a182b9d177 ("xhci: Fix use-after-free in xhci_free_virt_device") Cc: Signed-off-by: Zhengjun Xing Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-mem.c | 4 ++-- drivers/usb/host/xhci-trace.h | 36 +++++++++++++++++++++++++++++++----- 2 files changed, 33 insertions(+), 7 deletions(-) diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index acbd3d7b8828..8a62eee9eee1 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -886,12 +886,12 @@ void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id) dev = xhci->devs[slot_id]; - trace_xhci_free_virt_device(dev); - xhci->dcbaa->dev_context_ptrs[slot_id] = 0; if (!dev) return; + trace_xhci_free_virt_device(dev); + if (dev->tt_info) old_active_eps = dev->tt_info->active_eps; diff --git a/drivers/usb/host/xhci-trace.h b/drivers/usb/host/xhci-trace.h index 410544ffe78f..88b427434bd8 100644 --- a/drivers/usb/host/xhci-trace.h +++ b/drivers/usb/host/xhci-trace.h @@ -171,6 +171,37 @@ DEFINE_EVENT(xhci_log_trb, xhci_dbc_gadget_ep_queue, TP_ARGS(ring, trb) ); +DECLARE_EVENT_CLASS(xhci_log_free_virt_dev, + TP_PROTO(struct xhci_virt_device *vdev), + TP_ARGS(vdev), + TP_STRUCT__entry( + __field(void *, vdev) + __field(unsigned long long, out_ctx) + __field(unsigned long long, in_ctx) + __field(u8, fake_port) + __field(u8, real_port) + __field(u16, current_mel) + + ), + TP_fast_assign( + __entry->vdev = vdev; + __entry->in_ctx = (unsigned long long) vdev->in_ctx->dma; + __entry->out_ctx = (unsigned long long) vdev->out_ctx->dma; + __entry->fake_port = (u8) vdev->fake_port; + __entry->real_port = (u8) vdev->real_port; + __entry->current_mel = (u16) vdev->current_mel; + ), + TP_printk("vdev %p ctx %llx | %llx fake_port %d real_port %d current_mel %d", + __entry->vdev, __entry->in_ctx, __entry->out_ctx, + __entry->fake_port, __entry->real_port, __entry->current_mel + ) +); + +DEFINE_EVENT(xhci_log_free_virt_dev, xhci_free_virt_device, + TP_PROTO(struct xhci_virt_device *vdev), + TP_ARGS(vdev) +); + DECLARE_EVENT_CLASS(xhci_log_virt_dev, TP_PROTO(struct xhci_virt_device *vdev), TP_ARGS(vdev), @@ -208,11 +239,6 @@ DEFINE_EVENT(xhci_log_virt_dev, xhci_alloc_virt_device, TP_ARGS(vdev) ); -DEFINE_EVENT(xhci_log_virt_dev, xhci_free_virt_device, - TP_PROTO(struct xhci_virt_device *vdev), - TP_ARGS(vdev) -); - DEFINE_EVENT(xhci_log_virt_dev, xhci_setup_device, TP_PROTO(struct xhci_virt_device *vdev), TP_ARGS(vdev) -- cgit v1.2.3 From 36eb93509c45d0bdbd8d09a01ab9d857972f5963 Mon Sep 17 00:00:00 2001 From: Dongjiu Geng Date: Thu, 21 Jun 2018 16:19:43 +0300 Subject: usb: xhci: remove the code build warning Initialize the 'err' variate to remove the build warning, the warning is shown as below: drivers/usb/host/xhci-tegra.c: In function 'tegra_xusb_mbox_thread': drivers/usb/host/xhci-tegra.c:552:6: warning: 'err' may be used uninitialized in this function [-Wuninitialized] drivers/usb/host/xhci-tegra.c:482:6: note: 'err' was declared here Fixes: e84fce0f8837 ("usb: xhci: Add NVIDIA Tegra XUSB controller driver") Signed-off-by: Dongjiu Geng Acked-by: Thierry Reding Acked-by: Jon Hunter Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-tegra.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/host/xhci-tegra.c b/drivers/usb/host/xhci-tegra.c index a8c1d073cba0..d50549fedec8 100644 --- a/drivers/usb/host/xhci-tegra.c +++ b/drivers/usb/host/xhci-tegra.c @@ -481,7 +481,7 @@ static void tegra_xusb_mbox_handle(struct tegra_xusb *tegra, unsigned long mask; unsigned int port; bool idle, enable; - int err; + int err = 0; memset(&rsp, 0, sizeof(rsp)); -- cgit v1.2.3 From 3431a150fd89bc74cd2f2aaf6977cc0e278fb445 Mon Sep 17 00:00:00 2001 From: Stefan Agner Date: Thu, 21 Jun 2018 16:19:44 +0300 Subject: usb: xhci: tegra: fix runtime PM error handling The address-of operator will always evaluate to true. However, power should be explicitly disabled if no power domain is used. Remove the address-of operator. Fixes: 58c38116c6cc ("usb: xhci: tegra: Add support for managing powergates") Signed-off-by: Stefan Agner Acked-by: Jon Hunter Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-tegra.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/host/xhci-tegra.c b/drivers/usb/host/xhci-tegra.c index d50549fedec8..4b463e5202a4 100644 --- a/drivers/usb/host/xhci-tegra.c +++ b/drivers/usb/host/xhci-tegra.c @@ -1223,10 +1223,10 @@ disable_rpm: pm_runtime_disable(&pdev->dev); usb_put_hcd(tegra->hcd); disable_xusbc: - if (!&pdev->dev.pm_domain) + if (!pdev->dev.pm_domain) tegra_powergate_power_off(TEGRA_POWERGATE_XUSBC); disable_xusba: - if (!&pdev->dev.pm_domain) + if (!pdev->dev.pm_domain) tegra_powergate_power_off(TEGRA_POWERGATE_XUSBA); put_padctl: tegra_xusb_padctl_put(tegra->padctl); -- cgit v1.2.3 From 305886ca87be480ae159908c2affd135c04215cf Mon Sep 17 00:00:00 2001 From: Ajay Gupta Date: Thu, 21 Jun 2018 16:19:45 +0300 Subject: usb: xhci: increase CRS timeout value Some controllers take almost 55ms to complete controller restore state (CRS). There is no timeout limit mentioned in xhci specification so fixing the issue by increasing the timeout limit to 100ms [reformat code comment -Mathias] Signed-off-by: Ajay Gupta Signed-off-by: Nagaraj Annaiah Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index f11ec61bcc7d..2f4850f25e82 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -1078,8 +1078,13 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) command = readl(&xhci->op_regs->command); command |= CMD_CRS; writel(command, &xhci->op_regs->command); + /* + * Some controllers take up to 55+ ms to complete the controller + * restore so setting the timeout to 100ms. Xhci specification + * doesn't mention any timeout value. + */ if (xhci_handshake(&xhci->op_regs->status, - STS_RESTORE, 0, 10 * 1000)) { + STS_RESTORE, 0, 100 * 1000)) { xhci_warn(xhci, "WARN: xHC restore state timeout\n"); spin_unlock_irq(&xhci->lock); return -ETIMEDOUT; -- cgit v1.2.3 From d2d2e3c46be5d6dd8001d0eebdf7cafb9bc7006b Mon Sep 17 00:00:00 2001 From: Heikki Krogerus Date: Thu, 21 Jun 2018 16:43:17 +0300 Subject: acpi: Add helper for deactivating memory region Sometimes memory resource may be overlapping with SystemMemory Operation Region by design, for example if the memory region is used as a mailbox for communication with a firmware in the system. One occasion of such mailboxes is USB Type-C Connector System Software Interface (UCSI). With regions like that, it is important that the driver is able to map the memory with the requirements it has. For example, the driver should be allowed to map the memory as non-cached memory. However, if the operation region has been accessed before the driver has mapped the memory, the memory has been marked as write-back by the time the driver is loaded. That means the driver will fail to map the memory if it expects non-cached memory. To work around the problem, introducing helper that the drivers can use to temporarily deactivate (unmap) SystemMemory Operation Regions that overlap with their IO memory. Fixes: 8243edf44152 ("usb: typec: ucsi: Add ACPI driver") Cc: stable@vger.kernel.org Reviewed-by: Rafael J. Wysocki Signed-off-by: Heikki Krogerus Signed-off-by: Greg Kroah-Hartman --- drivers/acpi/osl.c | 72 ++++++++++++++++++++++++++++++++++++++++++++++++++++ include/linux/acpi.h | 3 +++ 2 files changed, 75 insertions(+) diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c index 7ca41bf023c9..8df9abfa947b 100644 --- a/drivers/acpi/osl.c +++ b/drivers/acpi/osl.c @@ -45,6 +45,8 @@ #include #include +#include "acpica/accommon.h" +#include "acpica/acnamesp.h" #include "internal.h" #define _COMPONENT ACPI_OS_SERVICES @@ -1490,6 +1492,76 @@ int acpi_check_region(resource_size_t start, resource_size_t n, } EXPORT_SYMBOL(acpi_check_region); +static acpi_status acpi_deactivate_mem_region(acpi_handle handle, u32 level, + void *_res, void **return_value) +{ + struct acpi_mem_space_context **mem_ctx; + union acpi_operand_object *handler_obj; + union acpi_operand_object *region_obj2; + union acpi_operand_object *region_obj; + struct resource *res = _res; + acpi_status status; + + region_obj = acpi_ns_get_attached_object(handle); + if (!region_obj) + return AE_OK; + + handler_obj = region_obj->region.handler; + if (!handler_obj) + return AE_OK; + + if (region_obj->region.space_id != ACPI_ADR_SPACE_SYSTEM_MEMORY) + return AE_OK; + + if (!(region_obj->region.flags & AOPOBJ_SETUP_COMPLETE)) + return AE_OK; + + region_obj2 = acpi_ns_get_secondary_object(region_obj); + if (!region_obj2) + return AE_OK; + + mem_ctx = (void *)®ion_obj2->extra.region_context; + + if (!(mem_ctx[0]->address >= res->start && + mem_ctx[0]->address < res->end)) + return AE_OK; + + status = handler_obj->address_space.setup(region_obj, + ACPI_REGION_DEACTIVATE, + NULL, (void **)mem_ctx); + if (ACPI_SUCCESS(status)) + region_obj->region.flags &= ~(AOPOBJ_SETUP_COMPLETE); + + return status; +} + +/** + * acpi_release_memory - Release any mappings done to a memory region + * @handle: Handle to namespace node + * @res: Memory resource + * @level: A level that terminates the search + * + * Walks through @handle and unmaps all SystemMemory Operation Regions that + * overlap with @res and that have already been activated (mapped). + * + * This is a helper that allows drivers to place special requirements on memory + * region that may overlap with operation regions, primarily allowing them to + * safely map the region as non-cached memory. + * + * The unmapped Operation Regions will be automatically remapped next time they + * are called, so the drivers do not need to do anything else. + */ +acpi_status acpi_release_memory(acpi_handle handle, struct resource *res, + u32 level) +{ + if (!(res->flags & IORESOURCE_MEM)) + return AE_TYPE; + + return acpi_walk_namespace(ACPI_TYPE_REGION, handle, level, + acpi_deactivate_mem_region, NULL, res, NULL); +} +EXPORT_SYMBOL_GPL(acpi_release_memory); + /* * Let drivers know whether the resource checks are effective */ diff --git a/include/linux/acpi.h b/include/linux/acpi.h index 4b35a66383f9..e54f40974eb0 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -443,6 +443,9 @@ int acpi_check_resource_conflict(const struct resource *res); int acpi_check_region(resource_size_t start, resource_size_t n, const char *name); +acpi_status acpi_release_memory(acpi_handle handle, struct resource *res, + u32 level); + int acpi_resources_are_enforced(void); #ifdef CONFIG_HIBERNATION -- cgit v1.2.3 From 1f9f9d168ce619608572b01771c47a41b15429e6 Mon Sep 17 00:00:00 2001 From: Heikki Krogerus Date: Thu, 21 Jun 2018 16:43:18 +0300 Subject: usb: typec: ucsi: acpi: Workaround for cache mode issue This fixes an issue where the driver fails with an error: ioremap error for 0x3f799000-0x3f79a000, requested 0x2, got 0x0 On some platforms the UCSI ACPI mailbox SystemMemory Operation Region may be setup before the driver has been loaded. That will lead into the driver failing to map the mailbox region, as it has been already marked as write-back memory. acpi_os_ioremap() for x86 uses ioremap_cache() unconditionally. When the issue happens, the embedded controller has a pending query event for the UCSI notification right after boot-up which causes the operation region to be setup before UCSI driver has been loaded. The fix is to notify acpi core that the driver is about to access memory region which potentially overlaps with an operation region right before mapping it. acpi_release_memory() will check if the memory has already been setup (mapped) by acpi core, and deactivate it (unmap) if it has. The driver is then able to map the memory with ioremap_nocache() and set the memtype to uncached for the region. Reported-by: Paul Menzel Fixes: 8243edf44152 ("usb: typec: ucsi: Add ACPI driver") Cc: stable@vger.kernel.org Signed-off-by: Heikki Krogerus Signed-off-by: Greg Kroah-Hartman --- drivers/usb/typec/ucsi/ucsi_acpi.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/usb/typec/ucsi/ucsi_acpi.c b/drivers/usb/typec/ucsi/ucsi_acpi.c index 44eb4e1ea817..a18112a83fae 100644 --- a/drivers/usb/typec/ucsi/ucsi_acpi.c +++ b/drivers/usb/typec/ucsi/ucsi_acpi.c @@ -79,6 +79,11 @@ static int ucsi_acpi_probe(struct platform_device *pdev) return -ENODEV; } + /* This will make sure we can use ioremap_nocache() */ + status = acpi_release_memory(ACPI_HANDLE(&pdev->dev), res, 1); + if (ACPI_FAILURE(status)) + return -ENOMEM; + /* * NOTE: The memory region for the data structures is used also in an * operation region, which means ACPI has already reserved it. Therefore -- cgit v1.2.3 From 68816e16b4789f2d05e77b6dcb77564cf5d6a8d8 Mon Sep 17 00:00:00 2001 From: Heikki Krogerus Date: Thu, 21 Jun 2018 16:43:19 +0300 Subject: usb: typec: ucsi: Fix for incorrect status data issue According to UCSI Specification, Connector Change Event only means a change in the Connector Status and Operation Mode fields of the STATUS data structure. So any other change should create another event. Unfortunately on some platforms the firmware acting as PPM (platform policy manager - usually embedded controller firmware) still does not report any other status changes if there is a connector change event. So if the connector power or data role was changed when a device was plugged to the connector, the driver does not get any indication about that. The port will show wrong roles if that happens. To fix the issue, always checking the data and power role together with a connector change event. Fixes: c1b0bc2dabfa ("usb: typec: Add support for UCSI interface") Signed-off-by: Heikki Krogerus Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/typec/ucsi/ucsi.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/drivers/usb/typec/ucsi/ucsi.c b/drivers/usb/typec/ucsi/ucsi.c index bd5cca5632b3..8d0a6fe748bd 100644 --- a/drivers/usb/typec/ucsi/ucsi.c +++ b/drivers/usb/typec/ucsi/ucsi.c @@ -350,6 +350,19 @@ static void ucsi_connector_change(struct work_struct *work) } if (con->status.change & UCSI_CONSTAT_CONNECT_CHANGE) { + typec_set_pwr_role(con->port, con->status.pwr_dir); + + switch (con->status.partner_type) { + case UCSI_CONSTAT_PARTNER_TYPE_UFP: + typec_set_data_role(con->port, TYPEC_HOST); + break; + case UCSI_CONSTAT_PARTNER_TYPE_DFP: + typec_set_data_role(con->port, TYPEC_DEVICE); + break; + default: + break; + } + if (con->status.connected) ucsi_register_partner(con); else -- cgit v1.2.3 From e16711c32bca59a29d8ef449eda5b8427dc6eb6d Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 20 Jun 2018 17:05:42 -0700 Subject: staging/typec: fix tcpci_rt1711h build errors Fix Kconfig warning and build errors in staging/typec/rt1711h.c. The driver uses I2C interfaces so it should depend on I2C. WARNING: unmet direct dependencies detected for TYPEC_TCPCI Depends on [m]: STAGING [=y] && TYPEC_TCPM [=y] && I2C [=m] Selected by [y]: - TYPEC_RT1711H [=y] && STAGING [=y] && TYPEC_TCPM [=y] and then: drivers/staging/typec/tcpci.o: In function `tcpci_probe': ../drivers/staging/typec/tcpci.c:536: undefined reference to `__devm_regmap_init_i2c' drivers/staging/typec/tcpci.o: In function `tcpci_i2c_driver_init': ../drivers/staging/typec/tcpci.c:593: undefined reference to `i2c_register_driver' drivers/staging/typec/tcpci.o: In function `tcpci_i2c_driver_exit': ../drivers/staging/typec/tcpci.c:593: undefined reference to `i2c_del_driver' drivers/staging/typec/tcpci_rt1711h.o: In function `rt1711h_check_revision': ../drivers/staging/typec/tcpci_rt1711h.c:218: undefined reference to `i2c_smbus_read_word_data' ../drivers/staging/typec/tcpci_rt1711h.c:225: undefined reference to `i2c_smbus_read_word_data' drivers/staging/typec/tcpci_rt1711h.o: In function `rt1711h_probe': ../drivers/staging/typec/tcpci_rt1711h.c:251: undefined reference to `__devm_regmap_init_i2c' drivers/staging/typec/tcpci_rt1711h.o: In function `rt1711h_i2c_driver_init': ../drivers/staging/typec/tcpci_rt1711h.c:308: undefined reference to `i2c_register_driver' drivers/staging/typec/tcpci_rt1711h.o: In function `rt1711h_i2c_driver_exit': ../drivers/staging/typec/tcpci_rt1711h.c:308: undefined reference to `i2c_del_driver' Fixes: ce08eaeb6388 ("staging: typec: rt1711h typec chip driver") Reported-by: kbuild test robot Signed-off-by: Randy Dunlap Cc: ShuFan Lee Cc: kbuild-all@01.org Reviewed-by: Guenter Roeck Revieved-by: Heikki Krogerus Signed-off-by: Greg Kroah-Hartman --- drivers/staging/typec/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/staging/typec/Kconfig b/drivers/staging/typec/Kconfig index 3aa981fbc8f5..e45ed08a5166 100644 --- a/drivers/staging/typec/Kconfig +++ b/drivers/staging/typec/Kconfig @@ -11,6 +11,7 @@ config TYPEC_TCPCI config TYPEC_RT1711H tristate "Richtek RT1711H Type-C chip driver" + depends on I2C select TYPEC_TCPCI help Richtek RT1711H Type-C chip driver that works with -- cgit v1.2.3 From 4a762569a2722b8a48066c7bacf0e1dc67d17fa1 Mon Sep 17 00:00:00 2001 From: Houston Yaroschoff Date: Mon, 11 Jun 2018 12:39:09 +0200 Subject: usb: cdc_acm: Add quirk for Uniden UBC125 scanner Uniden UBC125 radio scanner has USB interface which fails to work with cdc_acm driver: usb 1-1.5: new full-speed USB device number 4 using xhci_hcd cdc_acm 1-1.5:1.0: Zero length descriptor references cdc_acm: probe of 1-1.5:1.0 failed with error -22 Adding the NO_UNION_NORMAL quirk for the device fixes the issue: usb 1-4: new full-speed USB device number 15 using xhci_hcd usb 1-4: New USB device found, idVendor=1965, idProduct=0018 usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-4: Product: UBC125XLT usb 1-4: Manufacturer: Uniden Corp. usb 1-4: SerialNumber: 0001 cdc_acm 1-4:1.0: ttyACM0: USB ACM device `lsusb -v` of the device: Bus 001 Device 015: ID 1965:0018 Uniden Corporation Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 2 Communications bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x1965 Uniden Corporation idProduct 0x0018 bcdDevice 0.01 iManufacturer 1 Uniden Corp. iProduct 2 UBC125XLT iSerial 3 0001 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 48 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 2 Abstract (modem) bInterfaceProtocol 0 None iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x87 EP 7 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 10 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 Unused bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Device Status: 0x0000 (Bus Powered) Signed-off-by: Houston Yaroschoff Cc: stable Acked-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-acm.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 7b366a6c0b49..998b32d0167e 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1758,6 +1758,9 @@ static const struct usb_device_id acm_ids[] = { { USB_DEVICE(0x11ca, 0x0201), /* VeriFone Mx870 Gadget Serial */ .driver_info = SINGLE_RX_URB, }, + { USB_DEVICE(0x1965, 0x0018), /* Uniden UBC125XLT */ + .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ + }, { USB_DEVICE(0x22b8, 0x7000), /* Motorola Q Phone */ .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ }, -- cgit v1.2.3 From ecc443c03fb14abfb8a6af5e3b2d43b5257e60f2 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Thu, 7 Jun 2018 15:54:48 +0200 Subject: NFC: pn533: Fix wrong GFP flag usage pn533_recv_response() is an urb completion handler, so it must use GFP_ATOMIC. pn533_usb_send_frame() OTOH runs from a regular sleeping context, so the pn533_submit_urb_for_response() there (and only there) can use the regular GFP_KERNEL flags. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1514134 Fixes: 9815c7cf22da ("NFC: pn533: Separate physical layer from ...") Cc: Michael Thalmeier Signed-off-by: Hans de Goede Signed-off-by: Greg Kroah-Hartman --- drivers/nfc/pn533/usb.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/nfc/pn533/usb.c b/drivers/nfc/pn533/usb.c index d5553c47014f..5d823e965883 100644 --- a/drivers/nfc/pn533/usb.c +++ b/drivers/nfc/pn533/usb.c @@ -74,7 +74,7 @@ static void pn533_recv_response(struct urb *urb) struct sk_buff *skb = NULL; if (!urb->status) { - skb = alloc_skb(urb->actual_length, GFP_KERNEL); + skb = alloc_skb(urb->actual_length, GFP_ATOMIC); if (!skb) { nfc_err(&phy->udev->dev, "failed to alloc memory\n"); } else { @@ -186,7 +186,7 @@ static int pn533_usb_send_frame(struct pn533 *dev, if (dev->protocol_type == PN533_PROTO_REQ_RESP) { /* request for response for sent packet directly */ - rc = pn533_submit_urb_for_response(phy, GFP_ATOMIC); + rc = pn533_submit_urb_for_response(phy, GFP_KERNEL); if (rc) goto error; } else if (dev->protocol_type == PN533_PROTO_REQ_ACK_RESP) { -- cgit v1.2.3 From 9578bcd0bb487b8ecef4b7eee799aafb678aa441 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 7 Jun 2018 16:17:14 +0300 Subject: typec: tcpm: Fix a msecs vs jiffies bug The tcpm_set_state() function take msecs not jiffies. Fixes: f0690a25a140 ("staging: typec: USB Type-C Port Manager (tcpm)") Signed-off-by: Dan Carpenter Acked-by: Heikki Krogerus Reviewed-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman --- drivers/usb/typec/tcpm.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/usb/typec/tcpm.c b/drivers/usb/typec/tcpm.c index 8a201dd53d36..0dfd755020f4 100644 --- a/drivers/usb/typec/tcpm.c +++ b/drivers/usb/typec/tcpm.c @@ -3043,7 +3043,8 @@ static void run_state_machine(struct tcpm_port *port) tcpm_port_is_sink(port) && time_is_after_jiffies(port->delayed_runtime)) { tcpm_set_state(port, SNK_DISCOVERY, - port->delayed_runtime - jiffies); + jiffies_to_msecs(port->delayed_runtime - + jiffies)); break; } tcpm_set_state(port, unattached_state(port), 0); -- cgit v1.2.3 From d5a4f93511b7000183c0d528739b824752139f79 Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Tue, 12 Jun 2018 09:53:01 +0800 Subject: usb: typec: tcpm: fix logbuffer index is wrong if _tcpm_log is re-entered The port->logbuffer_head may be wrong if the two processes enters _tcpm_log at the mostly same time. The 2nd process enters _tcpm_log before the 1st process update the index, then the 2nd process will not allocate logbuffer, when the 2nd process tries to use log buffer, the index has already updated by the 1st process, so it will get NULL pointer for updated logbuffer, the error message like below: tcpci 0-0050: Log buffer index 6 is NULL Cc: Heikki Krogerus Cc: Guenter Roeck Cc: Jun Li Signed-off-by: Peter Chen Reviewed-by: Heikki Krogerus Cc: stable Reviewed-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman --- drivers/usb/typec/tcpm.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/usb/typec/tcpm.c b/drivers/usb/typec/tcpm.c index 0dfd755020f4..d961f1ec0e08 100644 --- a/drivers/usb/typec/tcpm.c +++ b/drivers/usb/typec/tcpm.c @@ -418,17 +418,18 @@ static void _tcpm_log(struct tcpm_port *port, const char *fmt, va_list args) u64 ts_nsec = local_clock(); unsigned long rem_nsec; + mutex_lock(&port->logbuffer_lock); if (!port->logbuffer[port->logbuffer_head]) { port->logbuffer[port->logbuffer_head] = kzalloc(LOG_BUFFER_ENTRY_SIZE, GFP_KERNEL); - if (!port->logbuffer[port->logbuffer_head]) + if (!port->logbuffer[port->logbuffer_head]) { + mutex_unlock(&port->logbuffer_lock); return; + } } vsnprintf(tmpbuffer, sizeof(tmpbuffer), fmt, args); - mutex_lock(&port->logbuffer_lock); - if (tcpm_log_full(port)) { port->logbuffer_head = max(port->logbuffer_head - 1, 0); strcpy(tmpbuffer, "overflow"); -- cgit v1.2.3 From 8793bb7f4a9dd1396575d2e9337d331662cb7555 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 19 Jun 2018 13:14:56 -0700 Subject: kbuild: add macro for controlling warnings to linux/compiler.h I have occasionally run into a situation where it would make sense to control a compiler warning from a source file rather than doing so from a Makefile using the $(cc-disable-warning, ...) or $(cc-option, ...) helpers. The approach here is similar to what glibc uses, using __diag() and related macros to encapsulate a _Pragma("GCC diagnostic ...") statement that gets turned into the respective "#pragma GCC diagnostic ..." by the preprocessor when the macro gets expanded. Like glibc, I also have an argument to pass the affected compiler version, but decided to actually evaluate that one. For now, this supports GCC_4_6, GCC_4_7, GCC_4_8, GCC_4_9, GCC_5, GCC_6, GCC_7, GCC_8 and GCC_9. Adding support for CLANG_5 and other interesting versions is straightforward here. GNU compilers starting with gcc-4.2 could support it in principle, but "#pragma GCC diagnostic push" was only added in gcc-4.6, so it seems simpler to not deal with those at all. The same versions show a large number of warnings already, so it seems easier to just leave it at that and not do a more fine-grained control for them. The use cases I found so far include: - turning off the gcc-8 -Wattribute-alias warning inside of the SYSCALL_DEFINEx() macro without having to do it globally. - Reducing the build time for a simple re-make after a change, once we move the warnings from ./Makefile and ./scripts/Makefile.extrawarn into linux/compiler.h - More control over the warnings based on other configurations, using preprocessor syntax instead of Makefile syntax. This should make it easier for the average developer to understand and change things. - Adding an easy way to turn the W=1 option on unconditionally for a subdirectory or a specific file. This has been requested by several developers in the past that want to have their subsystems W=1 clean. - Integrating clang better into the build systems. Clang supports more warnings than GCC, and we probably want to classify them as default, W=1, W=2 etc, but there are cases in which the warnings should be classified differently due to excessive false positives from one or the other compiler. - Adding a way to turn the default warnings into errors (e.g. using a new "make E=0" tag) while not also turning the W=1 warnings into errors. This patch for now just adds the minimal infrastructure in order to do the first of the list above. As the #pragma GCC diagnostic takes precedence over command line options, the next step would be to convert a lot of the individual Makefiles that set nonstandard options to use __diag() instead. [paul.burton@mips.com: - Rebase atop current master. - Add __diag_GCC, or more generally __diag_, abstraction to avoid code outside of linux/compiler-gcc.h needing to duplicate knowledge about different GCC versions. - Add a comment argument to __diag_{ignore,warn,error} which isn't used in the expansion of the macros but serves to push people to document the reason for using them - per feedback from Kees Cook. - Translate severity to GCC-specific pragmas in linux/compiler-gcc.h rather than using GCC-specific in linux/compiler_types.h. - Drop all but GCC 8 macros, since we only need to define macros for versions that we need to introduce pragmas for, and as of this series that's just GCC 8. - Capitalize comments in linux/compiler-gcc.h to match the style of the rest of the file. - Line up macro definitions with tabs in linux/compiler-gcc.h.] Signed-off-by: Arnd Bergmann Signed-off-by: Paul Burton Tested-by: Christophe Leroy Tested-by: Stafford Horne Signed-off-by: Masahiro Yamada --- include/linux/compiler-gcc.h | 25 +++++++++++++++++++++++++ include/linux/compiler_types.h | 18 ++++++++++++++++++ 2 files changed, 43 insertions(+) diff --git a/include/linux/compiler-gcc.h b/include/linux/compiler-gcc.h index f1a7492a5cc8..fd282c7d3e5e 100644 --- a/include/linux/compiler-gcc.h +++ b/include/linux/compiler-gcc.h @@ -347,3 +347,28 @@ #if GCC_VERSION >= 50100 #define COMPILER_HAS_GENERIC_BUILTIN_OVERFLOW 1 #endif + +/* + * Turn individual warnings and errors on and off locally, depending + * on version. + */ +#define __diag_GCC(version, severity, s) \ + __diag_GCC_ ## version(__diag_GCC_ ## severity s) + +/* Severity used in pragma directives */ +#define __diag_GCC_ignore ignored +#define __diag_GCC_warn warning +#define __diag_GCC_error error + +/* Compilers before gcc-4.6 do not understand "#pragma GCC diagnostic push" */ +#if GCC_VERSION >= 40600 +#define __diag_str1(s) #s +#define __diag_str(s) __diag_str1(s) +#define __diag(s) _Pragma(__diag_str(GCC diagnostic s)) +#endif + +#if GCC_VERSION >= 80000 +#define __diag_GCC_8(s) __diag(s) +#else +#define __diag_GCC_8(s) +#endif diff --git a/include/linux/compiler_types.h b/include/linux/compiler_types.h index 6b79a9bba9a7..a8ba6b04152c 100644 --- a/include/linux/compiler_types.h +++ b/include/linux/compiler_types.h @@ -271,4 +271,22 @@ struct ftrace_likely_data { # define __native_word(t) (sizeof(t) == sizeof(char) || sizeof(t) == sizeof(short) || sizeof(t) == sizeof(int) || sizeof(t) == sizeof(long)) #endif +#ifndef __diag +#define __diag(string) +#endif + +#ifndef __diag_GCC +#define __diag_GCC(version, severity, string) +#endif + +#define __diag_push() __diag(push) +#define __diag_pop() __diag(pop) + +#define __diag_ignore(compiler, version, option, comment) \ + __diag_ ## compiler(version, ignore, option) +#define __diag_warn(compiler, version, option, comment) \ + __diag_ ## compiler(version, warn, option) +#define __diag_error(compiler, version, option, comment) \ + __diag_ ## compiler(version, error, option) + #endif /* __LINUX_COMPILER_TYPES_H */ -- cgit v1.2.3 From bee20031772af3debe8cbaa234528f24c7892e8f Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 19 Jun 2018 13:14:57 -0700 Subject: disable -Wattribute-alias warning for SYSCALL_DEFINEx() gcc-8 warns for every single definition of a system call entry point, e.g.: include/linux/compat.h:56:18: error: 'compat_sys_rt_sigprocmask' alias between functions of incompatible types 'long int(int, compat_sigset_t *, compat_sigset_t *, compat_size_t)' {aka 'long int(int, struct *, struct *, unsigned int)'} and 'long int(long int, long int, long int, long int)' [-Werror=attribute-alias] asmlinkage long compat_sys##name(__MAP(x,__SC_DECL,__VA_ARGS__))\ ^~~~~~~~~~ include/linux/compat.h:45:2: note: in expansion of macro 'COMPAT_SYSCALL_DEFINEx' COMPAT_SYSCALL_DEFINEx(4, _##name, __VA_ARGS__) ^~~~~~~~~~~~~~~~~~~~~~ kernel/signal.c:2601:1: note: in expansion of macro 'COMPAT_SYSCALL_DEFINE4' COMPAT_SYSCALL_DEFINE4(rt_sigprocmask, int, how, compat_sigset_t __user *, nset, ^~~~~~~~~~~~~~~~~~~~~~ include/linux/compat.h:60:18: note: aliased declaration here asmlinkage long compat_SyS##name(__MAP(x,__SC_LONG,__VA_ARGS__))\ ^~~~~~~~~~ The new warning seems reasonable in principle, but it doesn't help us here, since we rely on the type mismatch to sanitize the system call arguments. After I reported this as GCC PR82435, a new -Wno-attribute-alias option was added that could be used to turn the warning off globally on the command line, but I'd prefer to do it a little more fine-grained. Interestingly, turning a warning off and on again inside of a single macro doesn't always work, in this case I had to add an extra statement inbetween and decided to copy the __SC_TEST one from the native syscall to the compat syscall macro. See https://gcc.gnu.org/bugzilla/show_bug.cgi?id=83256 for more details about this. [paul.burton@mips.com: - Rebase atop current master. - Split GCC & version arguments to __diag_ignore() in order to match changes to the preceding patch. - Add the comment argument to match the preceding patch.] Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=82435 Signed-off-by: Arnd Bergmann Signed-off-by: Paul Burton Tested-by: Christophe Leroy Tested-by: Stafford Horne Signed-off-by: Masahiro Yamada --- include/linux/compat.h | 8 +++++++- include/linux/syscalls.h | 4 ++++ 2 files changed, 11 insertions(+), 1 deletion(-) diff --git a/include/linux/compat.h b/include/linux/compat.h index b1a5562b3215..c68acc47da57 100644 --- a/include/linux/compat.h +++ b/include/linux/compat.h @@ -72,6 +72,9 @@ */ #ifndef COMPAT_SYSCALL_DEFINEx #define COMPAT_SYSCALL_DEFINEx(x, name, ...) \ + __diag_push(); \ + __diag_ignore(GCC, 8, "-Wattribute-alias", \ + "Type aliasing is used to sanitize syscall arguments");\ asmlinkage long compat_sys##name(__MAP(x,__SC_DECL,__VA_ARGS__)); \ asmlinkage long compat_sys##name(__MAP(x,__SC_DECL,__VA_ARGS__)) \ __attribute__((alias(__stringify(__se_compat_sys##name)))); \ @@ -80,8 +83,11 @@ asmlinkage long __se_compat_sys##name(__MAP(x,__SC_LONG,__VA_ARGS__)); \ asmlinkage long __se_compat_sys##name(__MAP(x,__SC_LONG,__VA_ARGS__)) \ { \ - return __do_compat_sys##name(__MAP(x,__SC_DELOUSE,__VA_ARGS__));\ + long ret = __do_compat_sys##name(__MAP(x,__SC_DELOUSE,__VA_ARGS__));\ + __MAP(x,__SC_TEST,__VA_ARGS__); \ + return ret; \ } \ + __diag_pop(); \ static inline long __do_compat_sys##name(__MAP(x,__SC_DECL,__VA_ARGS__)) #endif /* COMPAT_SYSCALL_DEFINEx */ diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h index 73810808cdf2..a368a68cb667 100644 --- a/include/linux/syscalls.h +++ b/include/linux/syscalls.h @@ -231,6 +231,9 @@ static inline int is_syscall_trace_event(struct trace_event_call *tp_event) */ #ifndef __SYSCALL_DEFINEx #define __SYSCALL_DEFINEx(x, name, ...) \ + __diag_push(); \ + __diag_ignore(GCC, 8, "-Wattribute-alias", \ + "Type aliasing is used to sanitize syscall arguments");\ asmlinkage long sys##name(__MAP(x,__SC_DECL,__VA_ARGS__)) \ __attribute__((alias(__stringify(__se_sys##name)))); \ ALLOW_ERROR_INJECTION(sys##name, ERRNO); \ @@ -243,6 +246,7 @@ static inline int is_syscall_trace_event(struct trace_event_call *tp_event) __PROTECT(x, ret,__MAP(x,__SC_ARGS,__VA_ARGS__)); \ return ret; \ } \ + __diag_pop(); \ static inline long __do_sys##name(__MAP(x,__SC_DECL,__VA_ARGS__)) #endif /* __SYSCALL_DEFINEx */ -- cgit v1.2.3 From ac8517440344dbe598f7c1c23e686c800b563061 Mon Sep 17 00:00:00 2001 From: Paul Burton Date: Tue, 19 Jun 2018 13:14:58 -0700 Subject: powerpc: Remove -Wattribute-alias pragmas With SYSCALL_DEFINEx() disabling -Wattribute-alias generically, there's no need to duplicate that for PowerPC syscalls. This reverts commit 415520373975 ("powerpc: fix build failure by disabling attribute-alias warning in pci_32") and commit 2479bfc9bc60 ("powerpc: Fix build by disabling attribute-alias warning for SYSCALL_DEFINEx"). Signed-off-by: Paul Burton Acked-by: Christophe Leroy Acked-by: Michael Ellerman Signed-off-by: Masahiro Yamada --- arch/powerpc/kernel/pci_32.c | 4 ---- arch/powerpc/kernel/pci_64.c | 4 ---- arch/powerpc/kernel/rtas.c | 4 ---- arch/powerpc/kernel/signal_32.c | 8 -------- arch/powerpc/kernel/signal_64.c | 4 ---- arch/powerpc/kernel/syscalls.c | 4 ---- arch/powerpc/mm/subpage-prot.c | 4 ---- 7 files changed, 32 deletions(-) diff --git a/arch/powerpc/kernel/pci_32.c b/arch/powerpc/kernel/pci_32.c index 4f861055a852..d63b488d34d7 100644 --- a/arch/powerpc/kernel/pci_32.c +++ b/arch/powerpc/kernel/pci_32.c @@ -285,9 +285,6 @@ pci_bus_to_hose(int bus) * Note that the returned IO or memory base is a physical address */ -#pragma GCC diagnostic push -#pragma GCC diagnostic ignored "-Wpragmas" -#pragma GCC diagnostic ignored "-Wattribute-alias" SYSCALL_DEFINE3(pciconfig_iobase, long, which, unsigned long, bus, unsigned long, devfn) { @@ -313,4 +310,3 @@ SYSCALL_DEFINE3(pciconfig_iobase, long, which, return result; } -#pragma GCC diagnostic pop diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c index 812171c09f42..dff28f903512 100644 --- a/arch/powerpc/kernel/pci_64.c +++ b/arch/powerpc/kernel/pci_64.c @@ -203,9 +203,6 @@ void pcibios_setup_phb_io_space(struct pci_controller *hose) #define IOBASE_ISA_IO 3 #define IOBASE_ISA_MEM 4 -#pragma GCC diagnostic push -#pragma GCC diagnostic ignored "-Wpragmas" -#pragma GCC diagnostic ignored "-Wattribute-alias" SYSCALL_DEFINE3(pciconfig_iobase, long, which, unsigned long, in_bus, unsigned long, in_devfn) { @@ -259,7 +256,6 @@ SYSCALL_DEFINE3(pciconfig_iobase, long, which, unsigned long, in_bus, return -EOPNOTSUPP; } -#pragma GCC diagnostic pop #ifdef CONFIG_NUMA int pcibus_to_node(struct pci_bus *bus) diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c index 7fb9f83dcde8..8afd146bc9c7 100644 --- a/arch/powerpc/kernel/rtas.c +++ b/arch/powerpc/kernel/rtas.c @@ -1051,9 +1051,6 @@ struct pseries_errorlog *get_pseries_errorlog(struct rtas_error_log *log, } /* We assume to be passed big endian arguments */ -#pragma GCC diagnostic push -#pragma GCC diagnostic ignored "-Wpragmas" -#pragma GCC diagnostic ignored "-Wattribute-alias" SYSCALL_DEFINE1(rtas, struct rtas_args __user *, uargs) { struct rtas_args args; @@ -1140,7 +1137,6 @@ SYSCALL_DEFINE1(rtas, struct rtas_args __user *, uargs) return 0; } -#pragma GCC diagnostic pop /* * Call early during boot, before mem init, to retrieve the RTAS diff --git a/arch/powerpc/kernel/signal_32.c b/arch/powerpc/kernel/signal_32.c index 5eedbb282d42..e6474a45cef5 100644 --- a/arch/powerpc/kernel/signal_32.c +++ b/arch/powerpc/kernel/signal_32.c @@ -1038,9 +1038,6 @@ static int do_setcontext_tm(struct ucontext __user *ucp, } #endif -#pragma GCC diagnostic push -#pragma GCC diagnostic ignored "-Wpragmas" -#pragma GCC diagnostic ignored "-Wattribute-alias" #ifdef CONFIG_PPC64 COMPAT_SYSCALL_DEFINE3(swapcontext, struct ucontext __user *, old_ctx, struct ucontext __user *, new_ctx, int, ctx_size) @@ -1134,7 +1131,6 @@ SYSCALL_DEFINE3(swapcontext, struct ucontext __user *, old_ctx, set_thread_flag(TIF_RESTOREALL); return 0; } -#pragma GCC diagnostic pop #ifdef CONFIG_PPC64 COMPAT_SYSCALL_DEFINE0(rt_sigreturn) @@ -1231,9 +1227,6 @@ SYSCALL_DEFINE0(rt_sigreturn) return 0; } -#pragma GCC diagnostic push -#pragma GCC diagnostic ignored "-Wpragmas" -#pragma GCC diagnostic ignored "-Wattribute-alias" #ifdef CONFIG_PPC32 SYSCALL_DEFINE3(debug_setcontext, struct ucontext __user *, ctx, int, ndbg, struct sig_dbg_op __user *, dbg) @@ -1337,7 +1330,6 @@ SYSCALL_DEFINE3(debug_setcontext, struct ucontext __user *, ctx, return 0; } #endif -#pragma GCC diagnostic pop /* * OK, we're invoking a handler diff --git a/arch/powerpc/kernel/signal_64.c b/arch/powerpc/kernel/signal_64.c index d42b60020389..83d51bf586c7 100644 --- a/arch/powerpc/kernel/signal_64.c +++ b/arch/powerpc/kernel/signal_64.c @@ -625,9 +625,6 @@ static long setup_trampoline(unsigned int syscall, unsigned int __user *tramp) /* * Handle {get,set,swap}_context operations */ -#pragma GCC diagnostic push -#pragma GCC diagnostic ignored "-Wpragmas" -#pragma GCC diagnostic ignored "-Wattribute-alias" SYSCALL_DEFINE3(swapcontext, struct ucontext __user *, old_ctx, struct ucontext __user *, new_ctx, long, ctx_size) { @@ -693,7 +690,6 @@ SYSCALL_DEFINE3(swapcontext, struct ucontext __user *, old_ctx, set_thread_flag(TIF_RESTOREALL); return 0; } -#pragma GCC diagnostic pop /* diff --git a/arch/powerpc/kernel/syscalls.c b/arch/powerpc/kernel/syscalls.c index 083fa06962fd..466216506eb2 100644 --- a/arch/powerpc/kernel/syscalls.c +++ b/arch/powerpc/kernel/syscalls.c @@ -62,9 +62,6 @@ out: return ret; } -#pragma GCC diagnostic push -#pragma GCC diagnostic ignored "-Wpragmas" -#pragma GCC diagnostic ignored "-Wattribute-alias" SYSCALL_DEFINE6(mmap2, unsigned long, addr, size_t, len, unsigned long, prot, unsigned long, flags, unsigned long, fd, unsigned long, pgoff) @@ -78,7 +75,6 @@ SYSCALL_DEFINE6(mmap, unsigned long, addr, size_t, len, { return do_mmap2(addr, len, prot, flags, fd, offset, PAGE_SHIFT); } -#pragma GCC diagnostic pop #ifdef CONFIG_PPC32 /* diff --git a/arch/powerpc/mm/subpage-prot.c b/arch/powerpc/mm/subpage-prot.c index 75cb646a79c3..9d16ee251fc0 100644 --- a/arch/powerpc/mm/subpage-prot.c +++ b/arch/powerpc/mm/subpage-prot.c @@ -186,9 +186,6 @@ static void subpage_mark_vma_nohuge(struct mm_struct *mm, unsigned long addr, * in a 2-bit field won't allow writes to a page that is otherwise * write-protected. */ -#pragma GCC diagnostic push -#pragma GCC diagnostic ignored "-Wpragmas" -#pragma GCC diagnostic ignored "-Wattribute-alias" SYSCALL_DEFINE3(subpage_prot, unsigned long, addr, unsigned long, len, u32 __user *, map) { @@ -272,4 +269,3 @@ SYSCALL_DEFINE3(subpage_prot, unsigned long, addr, up_write(&mm->mmap_sem); return err; } -#pragma GCC diagnostic pop -- cgit v1.2.3 From 5391e536dbf702de6581369e47c9c4cea3a87170 Mon Sep 17 00:00:00 2001 From: Sven Joachim Date: Mon, 18 Jun 2018 19:45:25 +0200 Subject: stack-protector: Fix test with 32-bit userland and CONFIG_64BIT=y When building a 64-bit 4.18-rc1 kernel with a 32-bit userland, I noticed that stack protection was silently disabled. Adding -m64 in gcc-x86_64-has-stack-protector.sh fixed that, similar to what has been noticed in commit 2a61f4747eea ("stack-protector: test compiler capability in Kconfig and drop AUTO mode") for gcc-x86_32-has-stack-protector.sh. Signed-off-by: Sven Joachim Signed-off-by: Masahiro Yamada --- scripts/gcc-x86_64-has-stack-protector.sh | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/scripts/gcc-x86_64-has-stack-protector.sh b/scripts/gcc-x86_64-has-stack-protector.sh index 3755af0cd9f7..75e4e22b986a 100755 --- a/scripts/gcc-x86_64-has-stack-protector.sh +++ b/scripts/gcc-x86_64-has-stack-protector.sh @@ -1,4 +1,4 @@ #!/bin/sh # SPDX-License-Identifier: GPL-2.0 -echo "int foo(void) { char X[200]; return 3; }" | $* -S -x c -c -O0 -mcmodel=kernel -fno-PIE -fstack-protector - -o - 2> /dev/null | grep -q "%gs" +echo "int foo(void) { char X[200]; return 3; }" | $* -S -x c -c -m64 -O0 -mcmodel=kernel -fno-PIE -fstack-protector - -o - 2> /dev/null | grep -q "%gs" -- cgit v1.2.3 From b2d00d7c61c84edd150310af3f556f8a3c6e2e67 Mon Sep 17 00:00:00 2001 From: Dirk Gouders Date: Thu, 21 Jun 2018 15:30:54 +0200 Subject: kconfig: fix line numbers for if-entries in menu tree The line numers for if-entries in the menu tree are off by one or more lines which is confusing when debugging for correctness of unrelated changes. According to the git log, commit a02f0570ae201c49 (kconfig: improve error handling in the parser) was the last one that changed that part of the parser and replaced "if_entry: T_IF expr T_EOL" by "if_entry: T_IF expr nl" but the commit message does not state why this has been done. When reverting that part of the commit, only the line numers are corrected (checked with cdebug = DEBUG_PARSE in zconf.y), otherwise the menu tree remains unchanged (checked with zconfdump() enabled in conf.c). An example for the corrected line numbers: drivers/soc/Kconfig:15:source drivers/soc/tegra/Kconfig drivers/soc/tegra/Kconfig:4:if drivers/soc/tegra/Kconfig:6:if changes to: drivers/soc/Kconfig:15:source drivers/soc/tegra/Kconfig drivers/soc/tegra/Kconfig:1:if drivers/soc/tegra/Kconfig:4:if Signed-off-by: Dirk Gouders Signed-off-by: Masahiro Yamada --- scripts/kconfig/zconf.y | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/scripts/kconfig/zconf.y b/scripts/kconfig/zconf.y index 6f9b0aa32a82..ed84d4a8e288 100644 --- a/scripts/kconfig/zconf.y +++ b/scripts/kconfig/zconf.y @@ -31,7 +31,7 @@ struct symbol *symbol_hash[SYMBOL_HASHSIZE]; static struct menu *current_menu, *current_entry; %} -%expect 32 +%expect 31 %union { @@ -337,7 +337,7 @@ choice_block: /* if entry */ -if_entry: T_IF expr nl +if_entry: T_IF expr T_EOL { printd(DEBUG_PARSE, "%s:%d:if\n", zconf_curname(), zconf_lineno()); menu_add_entry(NULL); -- cgit v1.2.3 From bdb60101df4a2999608430112a5abfb78628db1e Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Fri, 22 Jun 2018 20:08:21 -0700 Subject: kconfig: document Kconfig source file comments I saw this type of Kconfig construct on LKML: config SYMBOOL #bool "prompt string" default y and wondered what it does. Then I wondered if '#' comments are even documented. They aren't, so add a little doc for that. Ah, good. kconfig says: arch/x86/Kconfig:2942:warning: config symbol defined without type Signed-off-by: Randy Dunlap Signed-off-by: Masahiro Yamada --- Documentation/kbuild/kconfig-language.txt | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/Documentation/kbuild/kconfig-language.txt b/Documentation/kbuild/kconfig-language.txt index 3534a84d206c..64e0775a62d4 100644 --- a/Documentation/kbuild/kconfig-language.txt +++ b/Documentation/kbuild/kconfig-language.txt @@ -430,6 +430,12 @@ This sets the config program's title bar if the config program chooses to use it. It should be placed at the top of the configuration, before any other statement. +'#' Kconfig source file comment: + +An unquoted '#' character anywhere in a source file line indicates +the beginning of a source file comment. The remainder of that line +is a comment. + Kconfig hints ------------- -- cgit v1.2.3 From 1376b0a2160319125c3a2822e8c09bd283cd8141 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 5 Jun 2018 12:36:30 +0300 Subject: staging: comedi: quatech_daqp_cs: fix no-op loop daqp_ao_insn_write() There is a '>' vs '<' typo so this loop is a no-op. Fixes: d35dcc89fc93 ("staging: comedi: quatech_daqp_cs: fix daqp_ao_insn_write()") Signed-off-by: Dan Carpenter Reviewed-by: Ian Abbott Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/quatech_daqp_cs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/comedi/drivers/quatech_daqp_cs.c b/drivers/staging/comedi/drivers/quatech_daqp_cs.c index ea194aa01a64..257b0daff01f 100644 --- a/drivers/staging/comedi/drivers/quatech_daqp_cs.c +++ b/drivers/staging/comedi/drivers/quatech_daqp_cs.c @@ -642,7 +642,7 @@ static int daqp_ao_insn_write(struct comedi_device *dev, /* Make sure D/A update mode is direct update */ outb(0, dev->iobase + DAQP_AUX_REG); - for (i = 0; i > insn->n; i++) { + for (i = 0; i < insn->n; i++) { unsigned int val = data[i]; int ret; -- cgit v1.2.3 From 0a2bc00341dcfcc793c0dbf4f8d43adf60458b05 Mon Sep 17 00:00:00 2001 From: Laura Abbott Date: Mon, 11 Jun 2018 11:06:53 -0700 Subject: staging: android: ion: Return an ERR_PTR in ion_map_kernel The expected return value from ion_map_kernel is an ERR_PTR. The error path for a vmalloc failure currently just returns NULL, triggering a warning in ion_buffer_kmap_get. Encode the vmalloc failure as an ERR_PTR. Reported-by: syzbot+55b1d9f811650de944c6@syzkaller.appspotmail.com Signed-off-by: Laura Abbott Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/staging/android/ion/ion_heap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/android/ion/ion_heap.c b/drivers/staging/android/ion/ion_heap.c index e8c440329708..31db510018a9 100644 --- a/drivers/staging/android/ion/ion_heap.c +++ b/drivers/staging/android/ion/ion_heap.c @@ -30,7 +30,7 @@ void *ion_heap_map_kernel(struct ion_heap *heap, struct page **tmp = pages; if (!pages) - return NULL; + return ERR_PTR(-ENOMEM); if (buffer->flags & ION_FLAG_CACHED) pgprot = PAGE_KERNEL; -- cgit v1.2.3 From 01766229533f9bdb1144a41b4345c8c7286da7b4 Mon Sep 17 00:00:00 2001 From: Thomas Richter Date: Mon, 11 Jun 2018 09:31:52 +0200 Subject: perf record: Support s390 random socket_id assignment On s390 the socket identifier assigned to a CPU identifier is random and (depending on the configuration of the LPAR) may be higher than the CPU identifier. This is currently not supported. Fix this by allowing arbitrary socket identifiers being assigned to CPU id. Output before: [root@p23lp27 perf]# ./perf report --header -I -v ... socket_id number is too big.You may need to upgrade the perf tool. Error: The perf.data file has no samples! # ======== # captured on : Tue May 29 09:29:57 2018 # header version : 1 ... # Core ID and Socket ID information is not available ... [root@p23lp27 perf]# Output after: [root@p23lp27 perf]# ./perf report --header -I -v ... Error: The perf.data file has no samples! # ======== # captured on : Tue May 29 09:29:57 2018 # header version : 1 ... # CPU 0: Core ID 0, Socket ID 6 # CPU 1: Core ID 1, Socket ID 3 # CPU 2: Core ID -1, Socket ID -1 ... [root@p23lp27 perf]# Signed-off-by: Thomas Richter Reviewed-by: Hendrik Brueckner Cc: Heiko Carstens Cc: Martin Schwidefsky Link: http://lkml.kernel.org/r/20180611073153.15592-1-tmricht@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/header.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/tools/perf/util/header.c b/tools/perf/util/header.c index 540cd2dcd3e7..59fcc790c865 100644 --- a/tools/perf/util/header.c +++ b/tools/perf/util/header.c @@ -2129,6 +2129,7 @@ static int process_cpu_topology(struct feat_fd *ff, void *data __maybe_unused) int cpu_nr = ff->ph->env.nr_cpus_avail; u64 size = 0; struct perf_header *ph = ff->ph; + bool do_core_id_test = true; ph->env.cpu = calloc(cpu_nr, sizeof(*ph->env.cpu)); if (!ph->env.cpu) @@ -2183,6 +2184,13 @@ static int process_cpu_topology(struct feat_fd *ff, void *data __maybe_unused) return 0; } + /* On s390 the socket_id number is not related to the numbers of cpus. + * The socket_id number might be higher than the numbers of cpus. + * This depends on the configuration. + */ + if (ph->env.arch && !strncmp(ph->env.arch, "s390", 4)) + do_core_id_test = false; + for (i = 0; i < (u32)cpu_nr; i++) { if (do_read_u32(ff, &nr)) goto free_cpu; @@ -2192,7 +2200,7 @@ static int process_cpu_topology(struct feat_fd *ff, void *data __maybe_unused) if (do_read_u32(ff, &nr)) goto free_cpu; - if (nr != (u32)-1 && nr > (u32)cpu_nr) { + if (do_core_id_test && nr != (u32)-1 && nr > (u32)cpu_nr) { pr_debug("socket_id number is too big." "You may need to upgrade the perf tool.\n"); goto free_cpu; -- cgit v1.2.3 From b930e62ecd362843002bdf84c2940439822af321 Mon Sep 17 00:00:00 2001 From: Thomas Richter Date: Mon, 11 Jun 2018 09:31:53 +0200 Subject: perf test session topology: Fix test on s390 On s390 this test case fails because the socket identifiction numbers assigned to the CPU are higher than the CPU identification numbers. F/ix this by adding the platform architecture into the perf data header flag information. This helps identifiing the test platform and handles s390 specifics in process_cpu_topology(). Before: [root@p23lp27 perf]# perf test -vvvvv -F 39 39: Session topology : --- start --- templ file: /tmp/perf-test-iUv755 socket_id number is too big.You may need to upgrade the perf tool. ---- end ---- Session topology: Skip [root@p23lp27 perf]# After: [root@p23lp27 perf]# perf test -vvvvv -F 39 39: Session topology : --- start --- templ file: /tmp/perf-test-8X8VTs CPU 0, core 0, socket 6 CPU 1, core 1, socket 3 ---- end ---- Session topology: Ok [root@p23lp27 perf]# Signed-off-by: Thomas Richter Reviewed-by: Hendrik Brueckner Cc: Heiko Carstens Cc: Martin Schwidefsky Fixes: c84974ed9fb6 ("perf test: Add entry to test cpu topology") Link: http://lkml.kernel.org/r/20180611073153.15592-2-tmricht@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/tests/topology.c | 1 + 1 file changed, 1 insertion(+) diff --git a/tools/perf/tests/topology.c b/tools/perf/tests/topology.c index 40e30a26b23c..9497d02f69e6 100644 --- a/tools/perf/tests/topology.c +++ b/tools/perf/tests/topology.c @@ -45,6 +45,7 @@ static int session_write_header(char *path) perf_header__set_feat(&session->header, HEADER_CPU_TOPOLOGY); perf_header__set_feat(&session->header, HEADER_NRCPUS); + perf_header__set_feat(&session->header, HEADER_ARCH); session->header.data_size += DATA_SIZE; -- cgit v1.2.3 From 143c99f6ac6812d23254e80844d6e34be897d3e1 Mon Sep 17 00:00:00 2001 From: Sandipan Das Date: Mon, 11 Jun 2018 16:10:49 +0530 Subject: perf report powerpc: Fix crash if callchain is empty For some cases, the callchain provided by the kernel may be empty. So, the callchain ip filtering code will cause a crash if we do not check whether the struct ip_callchain pointer is NULL before accessing any members. This can be observed on a powerpc64le system running Fedora 27 as shown below. # perf record -b -e cycles:u ls Before: # perf report --branch-history perf: Segmentation fault -------- backtrace -------- perf[0x1027615c] linux-vdso64.so.1(__kernel_sigtramp_rt64+0x0)[0x7fff856304d8] perf(arch_skip_callchain_idx+0x44)[0x10257c58] perf[0x1017f2e4] perf(thread__resolve_callchain+0x124)[0x1017ff5c] perf(sample__resolve_callchain+0xf0)[0x10172788] ... After: # perf report --branch-history Samples: 25 of event 'cycles:u', Event count (approx.): 2306870 Overhead Source:Line Symbol Shared Object + 11.60% _init+35736 [.] _init ls + 9.84% strcoll_l.c:137 [.] __strcoll_l libc-2.26.so + 9.16% memcpy.S:175 [.] __memcpy_power7 libc-2.26.so + 9.01% gconv_charset.h:54 [.] _nl_find_locale libc-2.26.so + 8.87% dl-addr.c:52 [.] _dl_addr libc-2.26.so + 8.83% _init+236 [.] _init ls ... Reported-by: Ravi Bangoria Signed-off-by: Sandipan Das Acked-by: Ravi Bangoria Cc: Jiri Olsa Cc: Naveen N. Rao Cc: Sukadev Bhattiprolu Link: http://lkml.kernel.org/r/20180611104049.11048-1-sandipan@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/arch/powerpc/util/skip-callchain-idx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/perf/arch/powerpc/util/skip-callchain-idx.c b/tools/perf/arch/powerpc/util/skip-callchain-idx.c index 3598b8b75d27..ef5d59a5742e 100644 --- a/tools/perf/arch/powerpc/util/skip-callchain-idx.c +++ b/tools/perf/arch/powerpc/util/skip-callchain-idx.c @@ -243,7 +243,7 @@ int arch_skip_callchain_idx(struct thread *thread, struct ip_callchain *chain) u64 ip; u64 skip_slot = -1; - if (chain->nr < 3) + if (!chain || chain->nr < 3) return skip_slot; ip = chain->ips[2]; -- cgit v1.2.3 From 933ccf2002aaef1037cb676622a694f5390c3d59 Mon Sep 17 00:00:00 2001 From: Jiri Olsa Date: Mon, 11 Jun 2018 11:34:21 +0200 Subject: perf tests: Add event parsing error handling to parse events test Add missing error handling for parse_events calls in test_event function that led to following segfault on s390: running test 52 'intel_pt//u' perf: Segmentation fault ... /lib64/libc.so.6(vasprintf+0xe6) [0x3fffca3f106] /lib64/libc.so.6(asprintf+0x46) [0x3fffca1aa96] ./perf(parse_events_add_pmu+0xb8) [0x80132088] ./perf(parse_events_parse+0xc62) [0x8019529a] ./perf(parse_events+0x98) [0x801341c0] ./perf(test__parse_events+0x48) [0x800cd140] ./perf(cmd_test+0x26a) [0x800bd44a] test child interrupted Adding the struct parse_events_error argument to parse_events call. Also adding parse_events_print_error to get more details on the parsing failures, like: # perf test 6 -v running test 52 'intel_pt//u'failed to parse event 'intel_pt//u', err 1, str 'Cannot find PMU `intel_pt'. Missing kernel support?' event syntax error: 'intel_pt//u' \___ Cannot find PMU `intel_pt'. Missing kernel support? Committer note: Use named initializers in the struct parse_events_error variable to avoid breaking the build on centos5, 6 and others with a similar gcc: cc1: warnings being treated as errors tests/parse-events.c: In function 'test_event': tests/parse-events.c:1696: error: missing initializer tests/parse-events.c:1696: error: (near initialization for 'err.str') Reported-by: Kim Phillips Signed-off-by: Jiri Olsa Tested-by: Kim Phillips Cc: Alexander Shishkin Cc: David Ahern Cc: Heiko Carstens Cc: Hendrik Brueckner Cc: Martin Schwidefsky Cc: Namhyung Kim Cc: Peter Zijlstra Cc: Thomas Richter Link: http://lkml.kernel.org/r/20180611093422.1005-1-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/tests/parse-events.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/tools/perf/tests/parse-events.c b/tools/perf/tests/parse-events.c index 7d4077068454..9751e7563a45 100644 --- a/tools/perf/tests/parse-events.c +++ b/tools/perf/tests/parse-events.c @@ -1686,6 +1686,7 @@ static struct terms_test test__terms[] = { static int test_event(struct evlist_test *e) { + struct parse_events_error err = { .idx = 0, }; struct perf_evlist *evlist; int ret; @@ -1693,10 +1694,11 @@ static int test_event(struct evlist_test *e) if (evlist == NULL) return -ENOMEM; - ret = parse_events(evlist, e->name, NULL); + ret = parse_events(evlist, e->name, &err); if (ret) { - pr_debug("failed to parse event '%s', err %d\n", - e->name, ret); + pr_debug("failed to parse event '%s', err %d, str '%s'\n", + e->name, ret, err.str); + parse_events_print_error(&err, e->name); } else { ret = e->check(evlist); } -- cgit v1.2.3 From 16ddcfbf7f3d07aa781e26b39f2c28636a4ed2fd Mon Sep 17 00:00:00 2001 From: Jiri Olsa Date: Mon, 11 Jun 2018 11:34:22 +0200 Subject: perf tests: Add valid callback for parse-events test Adding optional 'valid' callback for events tests in parse-events object, so we don't try to parse PMUs, which are not supported. Following line is displayed for skipped test: running test 52 'intel_pt//u'... SKIP Committer note: Use named initializers in the struct evlist_test variable to avoid breaking the build on centos:5, 6 and others with a similar gcc: cc1: warnings being treated as errors tests/parse-events.c: In function 'test_pmu_events': tests/parse-events.c:1817: error: missing initializer tests/parse-events.c:1817: error: (near initialization for 'e.type') Signed-off-by: Jiri Olsa Cc: Alexander Shishkin Cc: David Ahern Cc: Heiko Carstens Cc: Hendrik Brueckner Cc: Kim Phillips Cc: Martin Schwidefsky Cc: Namhyung Kim Cc: Peter Zijlstra Cc: Thomas Richter Link: http://lkml.kernel.org/r/20180611093422.1005-2-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/tests/parse-events.c | 17 +++++++++++++++-- 1 file changed, 15 insertions(+), 2 deletions(-) diff --git a/tools/perf/tests/parse-events.c b/tools/perf/tests/parse-events.c index 9751e7563a45..61211918bfba 100644 --- a/tools/perf/tests/parse-events.c +++ b/tools/perf/tests/parse-events.c @@ -1309,6 +1309,11 @@ static int test__checkevent_config_cache(struct perf_evlist *evlist) return 0; } +static bool test__intel_pt_valid(void) +{ + return !!perf_pmu__find("intel_pt"); +} + static int test__intel_pt(struct perf_evlist *evlist) { struct perf_evsel *evsel = perf_evlist__first(evlist); @@ -1375,6 +1380,7 @@ struct evlist_test { const char *name; __u32 type; const int id; + bool (*valid)(void); int (*check)(struct perf_evlist *evlist); }; @@ -1648,6 +1654,7 @@ static struct evlist_test test__events[] = { }, { .name = "intel_pt//u", + .valid = test__intel_pt_valid, .check = test__intel_pt, .id = 52, }, @@ -1690,6 +1697,11 @@ static int test_event(struct evlist_test *e) struct perf_evlist *evlist; int ret; + if (e->valid && !e->valid()) { + pr_debug("... SKIP"); + return 0; + } + evlist = perf_evlist__new(); if (evlist == NULL) return -ENOMEM; @@ -1716,10 +1728,11 @@ static int test_events(struct evlist_test *events, unsigned cnt) for (i = 0; i < cnt; i++) { struct evlist_test *e = &events[i]; - pr_debug("running test %d '%s'\n", e->id, e->name); + pr_debug("running test %d '%s'", e->id, e->name); ret1 = test_event(e); if (ret1) ret2 = ret1; + pr_debug("\n"); } return ret2; @@ -1801,7 +1814,7 @@ static int test_pmu_events(void) } while (!ret && (ent = readdir(dir))) { - struct evlist_test e; + struct evlist_test e = { .id = 0, }; char name[2 * NAME_MAX + 1 + 12 + 3]; /* Names containing . are special and cannot be used directly */ -- cgit v1.2.3 From 621a5a327c1e36ffd7bb567f44a559f64f76358f Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Thu, 7 Jun 2018 14:30:02 +0300 Subject: perf intel-pt: Fix packet decoding of CYC packets Use a 64-bit type so that the cycle count is not limited to 32-bits. Signed-off-by: Adrian Hunter Cc: Jiri Olsa Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1528371002-8862-1-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/intel-pt-decoder/intel-pt-pkt-decoder.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/perf/util/intel-pt-decoder/intel-pt-pkt-decoder.c b/tools/perf/util/intel-pt-decoder/intel-pt-pkt-decoder.c index ba4c9dd18643..d426761a549d 100644 --- a/tools/perf/util/intel-pt-decoder/intel-pt-pkt-decoder.c +++ b/tools/perf/util/intel-pt-decoder/intel-pt-pkt-decoder.c @@ -366,7 +366,7 @@ static int intel_pt_get_cyc(unsigned int byte, const unsigned char *buf, if (len < offs) return INTEL_PT_NEED_MORE_BYTES; byte = buf[offs++]; - payload |= (byte >> 1) << shift; + payload |= ((uint64_t)byte >> 1) << shift; } packet->type = INTEL_PT_CYC; -- cgit v1.2.3 From 7b818dc57230bf050bbc4218cd4df8ec59b9945d Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Fri, 15 Jun 2018 11:33:35 -0300 Subject: tools headers uapi: Synchronize drm/drm.h To pick up the new ioctls added in these csets: 7595bda2fb43 ("drm: Add DRM client cap for aspect-ratio") The DRM caps are not yet being decoded in 'perf trace', so this sync doesn't incur in any change in behaviour in any tools, just silencing this tools/perf/ build warning: Warning: Kernel ABI header at 'tools/include/uapi/drm/drm.h' differs from latest version at 'include/uapi/drm/drm.h' Cc: Adrian Hunter Cc: Ankit Nautiyal Cc: David Ahern Cc: Jiri Olsa Cc: Maarten Lankhorst Cc: Namhyung Kim Cc: Wang Nan Link: https://lkml.kernel.org/n/tip-atwz0arwanq1npu8pptwkoxt@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/include/uapi/drm/drm.h | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/tools/include/uapi/drm/drm.h b/tools/include/uapi/drm/drm.h index 6fdff5945c8a..9c660e1688ab 100644 --- a/tools/include/uapi/drm/drm.h +++ b/tools/include/uapi/drm/drm.h @@ -680,6 +680,13 @@ struct drm_get_cap { */ #define DRM_CLIENT_CAP_ATOMIC 3 +/** + * DRM_CLIENT_CAP_ASPECT_RATIO + * + * If set to 1, the DRM core will provide aspect ratio information in modes. + */ +#define DRM_CLIENT_CAP_ASPECT_RATIO 4 + /** DRM_IOCTL_SET_CLIENT_CAP ioctl argument type */ struct drm_set_client_cap { __u64 capability; -- cgit v1.2.3 From b1494ec029af6d6ea189cbc96ad66463f8df3579 Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Fri, 15 Jun 2018 11:48:43 -0300 Subject: perf tools: Update x86's syscall_64.tbl, adding 'io_pgetevents' and 'rseq' This updates the tools/perf/ copy of the system call table for x86 which makes 'perf trace' become aware of the new 'io_pgetevents' and 'rseq' syscalls, no matter in which system it gets built, i.e. older systems where the syscalls are not available in the running kernel (via tracefs) or in the system headers will still be aware of these syscalls/. These are the csets introducing the source drift: 05c17cedf85b ("x86: Wire up restartable sequence system call") 7a074e96dee6 ("aio: implement io_pgetevents") This results in this build time change: $ diff -u /tmp/build/perf/arch/x86/include/generated/asm/syscalls_64.c.old /tmp/build/perf/arch/x86/include/generated/asm/syscalls_64.c --- /tmp/build/perf/arch/x86/include/generated/asm/syscalls_64.c.old 2018-06-15 11:48:17.648948094 -0300 +++ /tmp/build/perf/arch/x86/include/generated/asm/syscalls_64.c 2018-06-15 11:48:22.133942480 -0300 @@ -332,5 +332,7 @@ [330] = "pkey_alloc", [331] = "pkey_free", [332] = "statx", + [333] = "io_pgetevents", + [334] = "rseq", }; -#define SYSCALLTBL_x86_64_MAX_ID 332 +#define SYSCALLTBL_x86_64_MAX_ID 334 $ This silences the following tools/perf/ build warning: Warning: Kernel ABI header at 'tools/perf/arch/x86/entry/syscalls/syscall_64.tbl' differs from latest version at 'arch/x86/entry/syscalls/syscall_64.tbl' Cc: Adrian Hunter Cc: Christoph Hellwig Cc: David Ahern Cc: Jiri Olsa Cc: Mathieu Desnoyers Cc: Namhyung Kim Cc: Thomas Gleixner Cc: Wang Nan Link: https://lkml.kernel.org/n/tip-tfvyz51sabuzemrszbrhzxni@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/arch/x86/entry/syscalls/syscall_64.tbl | 2 ++ 1 file changed, 2 insertions(+) diff --git a/tools/perf/arch/x86/entry/syscalls/syscall_64.tbl b/tools/perf/arch/x86/entry/syscalls/syscall_64.tbl index 4dfe42666d0c..f0b1709a5ffb 100644 --- a/tools/perf/arch/x86/entry/syscalls/syscall_64.tbl +++ b/tools/perf/arch/x86/entry/syscalls/syscall_64.tbl @@ -341,6 +341,8 @@ 330 common pkey_alloc __x64_sys_pkey_alloc 331 common pkey_free __x64_sys_pkey_free 332 common statx __x64_sys_statx +333 common io_pgetevents __x64_sys_io_pgetevents +334 common rseq __x64_sys_rseq # # x32-specific system call numbers start at 512 to avoid cache impact -- cgit v1.2.3 From 801f5e1ac783df9fafff8899ef2d5511bd4dbdcb Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Fri, 15 Jun 2018 12:04:32 -0300 Subject: tools include powerpc: Update arch/powerpc/include/uapi/asm/unistd.h copy to get 'rseq' syscall This updates the tools/perf/ copy of the powerpc file used to generate the syscall table file used to make 'perf trace' become aware of the new 'rseq' syscall, no matter in which system it gets built, i.e. older systems where the syscalls are not available in the running kernel (via tracefs) or in the system headers will still be aware of these syscalls/. From this commit: bb862b021d75 ("powerpc: Wire up restartable sequences system call") Silencing this tools/perf build warning: Warning: Kernel ABI header at 'tools/arch/powerpc/include/uapi/asm/unistd.h' differs from latest version at 'arch/powerpc/include/uapi/asm/unistd.h' Cc: Adrian Hunter Cc: Alexander Shishkin Cc: Boqun Feng Cc: David Ahern Cc: Hendrik Brueckner Cc: Jiri Olsa Cc: Mathieu Desnoyers Cc: Michael Ellerman Cc: Namhyung Kim Cc: Ravi Bangoria Cc: Thomas Gleixner Cc: Thomas Richter Cc: Wang Nan Link: https://lkml.kernel.org/n/tip-adtgz6u3apd76tghiu9w0k19@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/arch/powerpc/include/uapi/asm/unistd.h | 1 + 1 file changed, 1 insertion(+) diff --git a/tools/arch/powerpc/include/uapi/asm/unistd.h b/tools/arch/powerpc/include/uapi/asm/unistd.h index 389c36fd8299..ac5ba55066dd 100644 --- a/tools/arch/powerpc/include/uapi/asm/unistd.h +++ b/tools/arch/powerpc/include/uapi/asm/unistd.h @@ -398,5 +398,6 @@ #define __NR_pkey_alloc 384 #define __NR_pkey_free 385 #define __NR_pkey_mprotect 386 +#define __NR_rseq 387 #endif /* _UAPI_ASM_POWERPC_UNISTD_H_ */ -- cgit v1.2.3 From bb9a33cb8a807e5ae9906563f5c1533904651b8b Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Fri, 15 Jun 2018 16:46:57 -0300 Subject: tools include uapi: Update if_link.h to pick IFLA_{BRPORT_ISOLATED,VXLAN_TTL_INHERIT} The IFLA_BRPORT_ISOLATED and IFLA_VXLAN_TTL_INHERIT defines were added in: 7d850abd5f4e ("net: bridge: add support for port isolation") 72f6d71e491e ("vxlan: add ttl inherit support") Pick them, silencing this build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/if_link.h' differs from latest version at 'include/uapi/linux/if_link.h' Cc: Alexei Starovoitov Cc: David S. Miller Cc: Eric Leblond Cc: Hangbin Liu Cc: Nikolay Aleksandrov Link: https://lkml.kernel.org/n/tip-ezi5u0mmdqm0wfm0y2y8176r@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/include/uapi/linux/if_link.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/tools/include/uapi/linux/if_link.h b/tools/include/uapi/linux/if_link.h index 68699f654118..cf01b6824244 100644 --- a/tools/include/uapi/linux/if_link.h +++ b/tools/include/uapi/linux/if_link.h @@ -333,6 +333,7 @@ enum { IFLA_BRPORT_BCAST_FLOOD, IFLA_BRPORT_GROUP_FWD_MASK, IFLA_BRPORT_NEIGH_SUPPRESS, + IFLA_BRPORT_ISOLATED, __IFLA_BRPORT_MAX }; #define IFLA_BRPORT_MAX (__IFLA_BRPORT_MAX - 1) @@ -516,6 +517,7 @@ enum { IFLA_VXLAN_COLLECT_METADATA, IFLA_VXLAN_LABEL, IFLA_VXLAN_GPE, + IFLA_VXLAN_TTL_INHERIT, __IFLA_VXLAN_MAX }; #define IFLA_VXLAN_MAX (__IFLA_VXLAN_MAX - 1) -- cgit v1.2.3 From f568b472815fd6c34fe4cc30dde4572ee300d6c4 Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Fri, 15 Jun 2018 16:55:32 -0300 Subject: tools include uapi: Synchronize bpf.h with the kernel To pick the rename in: bd3a08aaa9a3 ("bpf: flowlabel in bpf_fib_lookup should be flowinfo") Silencing this build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/bpf.h' differs from latest version at 'include/uapi/linux/bpf.h' Cc: Adrian Hunter Cc: Alexei Starovoitov Cc: David Ahern Cc: Jiri Olsa Cc: Namhyung Kim Cc: Wang Nan Link: https://lkml.kernel.org/n/tip-zd1sgtbybtjrrt7bqdybu0s0@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/include/uapi/linux/bpf.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/include/uapi/linux/bpf.h b/tools/include/uapi/linux/bpf.h index e0b06784f227..59b19b6a40d7 100644 --- a/tools/include/uapi/linux/bpf.h +++ b/tools/include/uapi/linux/bpf.h @@ -2630,7 +2630,7 @@ struct bpf_fib_lookup { union { /* inputs to lookup */ __u8 tos; /* AF_INET */ - __be32 flowlabel; /* AF_INET6 */ + __be32 flowinfo; /* AF_INET6, flow_label + priority */ /* output: metric of fib result (IPv4/IPv6 only) */ __u32 rt_metric; -- cgit v1.2.3 From c6555c14572aeadf4fe2819abd971c4e7608b926 Mon Sep 17 00:00:00 2001 From: Yonghong Song Date: Sat, 16 Jun 2018 10:47:39 -0700 Subject: perf tools: Fix a clang 7.0 compilation error MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Arnaldo reported the perf build failure with latest llvm/clang compiler (7.0). $ make LIBCLANGLLVM=1 -C tools/perf/ CC /tmp/tmp.t53Qo38zci/tests/kmod-path.o util/c++/clang.cpp: In function ‘std::unique_ptr > perf::getBPFObjectFromModule(llvm::Module*)’: util/c++/clang.cpp:150:43: error: no matching function for call to ‘llvm::TargetMachine::addPassesToEmitFile(llvm::legacy::PassManager&, llvm::raw_svector_ostream&, llvm::TargetMachine::CodeGenFileType)’ TargetMachine::CGFT_ObjectFile)) { ^ In file included from util/c++/clang.cpp:25:0: /usr/local/include/llvm/Target/TargetMachine.h:254:16: note: candidate: virtual bool llvm::TargetMachine::addPassesToEmitFile( llvm::legacy::PassManagerBase&, llvm::raw_pwrite_stream&, llvm::raw_pwrite_stream*, llvm::TargetMachine::CodeGenFileType, bool, llvm::MachineModuleInfo*) virtual bool addPassesToEmitFile(PassManagerBase &, raw_pwrite_stream &, ^~~~~~~~~~~~~~~~~~~ /usr/local/include/llvm/Target/TargetMachine.h:254:16: note: candidate expects 6 arguments, 3 provided mv: cannot stat '/tmp/tmp.t53Qo38zci/util/c++/.clang.o.tmp': No such file or directory make[7]: *** [/home/acme/git/perf/tools/build/Makefile.build:101: /tmp/tmp.t53Qo38zci/util/c++/clang.o] Error 1 make[6]: *** [/home/acme/git/perf/tools/build/Makefile.build:139: c++] Error 2 make[5]: *** [/home/acme/git/perf/tools/build/Makefile.build:139: util] Error 2 make[5]: *** Waiting for unfinished jobs.... CC /tmp/tmp.t53Qo38zci/tests/thread-map.o The function addPassesToEmitFile signature changed in llvm 7.0 and such a change caused the failure. This patch fixed the issue with using proper function signatures under different compiler versions. Reported-by: Arnaldo Carvalho de Melo Signed-off-by: Yonghong Song Tested-by: Arnaldo Carvalho de Melo Cc: Alexei Starovoitov Cc: Daniel Borkmann Cc: Jiri Olsa Cc: Martin KaFai Lau Cc: Wang Nan Link: http://lkml.kernel.org/r/20180616174739.1076733-1-yhs@fb.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/c++/clang.cpp | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/tools/perf/util/c++/clang.cpp b/tools/perf/util/c++/clang.cpp index bf31ceab33bd..89512504551b 100644 --- a/tools/perf/util/c++/clang.cpp +++ b/tools/perf/util/c++/clang.cpp @@ -146,8 +146,15 @@ getBPFObjectFromModule(llvm::Module *Module) raw_svector_ostream ostream(*Buffer); legacy::PassManager PM; - if (TargetMachine->addPassesToEmitFile(PM, ostream, - TargetMachine::CGFT_ObjectFile)) { + bool NotAdded; +#if CLANG_VERSION_MAJOR < 7 + NotAdded = TargetMachine->addPassesToEmitFile(PM, ostream, + TargetMachine::CGFT_ObjectFile); +#else + NotAdded = TargetMachine->addPassesToEmitFile(PM, ostream, nullptr, + TargetMachine::CGFT_ObjectFile); +#endif + if (NotAdded) { llvm::errs() << "TargetMachine can't emit a file of this type\n"; return std::unique_ptr>(nullptr);; } -- cgit v1.2.3 From ea23ac73085743a4f1682d6605fe019577c82e1e Mon Sep 17 00:00:00 2001 From: Thomas Richter Date: Fri, 15 Jun 2018 12:11:03 +0200 Subject: perf alias: Remove trailing newline when reading sysfs files Remove a trailing newline when reading sysfs file contents such as /sys/devices/cpum_cf/events/TX_NC_TEND. This shows when verbose option -v is used. Output before: tx_nc_tend -> 'cpum_cf'/'event=0x008d '/ Output after: tx_nc_tend -> 'cpum_cf'/'event=0x8d'/ Signed-off-by: Thomas Richter Reviewed-by: Hendrik Brueckner Cc: Heiko Carstens Cc: Jiri Olsa Cc: Martin Schwidefsky Link: http://lkml.kernel.org/r/20180615101105.47047-1-tmricht@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/pmu.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/tools/perf/util/pmu.c b/tools/perf/util/pmu.c index d2fb597c9a8c..2738fc8d200d 100644 --- a/tools/perf/util/pmu.c +++ b/tools/perf/util/pmu.c @@ -303,6 +303,9 @@ static int perf_pmu__new_alias(struct list_head *list, char *dir, char *name, FI buf[ret] = 0; + /* Remove trailing newline from sysfs file */ + rtrim(buf); + return __perf_pmu__new_alias(list, dir, name, NULL, buf, NULL, NULL, NULL, NULL, NULL, NULL); } -- cgit v1.2.3 From 0c24d6fb7bd3578e5b9e4972d01bbe3d087ded33 Mon Sep 17 00:00:00 2001 From: Thomas Richter Date: Fri, 15 Jun 2018 12:11:04 +0200 Subject: perf alias: Rebuild alias expression string to make it comparable PMU alias definitions in sysfs files may have spaces, newlines and numbers with leading zeroes. Some alias definitions may also appear in JSON files without spaces, etc. Scan alias definitions and remove leading zeroes, spaces, newlines, etc and rebuild string to make alias->str member comparable. s390 for example has terms specified as event=0x0091 (read from files ..//events/ and terms specified as event=0x91 (read from JSON files). Signed-off-by: Thomas Richter Reviewed-by: Hendrik Brueckner Cc: Heiko Carstens Cc: Jiri Olsa Cc: Martin Schwidefsky Link: http://lkml.kernel.org/r/20180615101105.47047-2-tmricht@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/pmu.c | 25 ++++++++++++++++++++++++- 1 file changed, 24 insertions(+), 1 deletion(-) diff --git a/tools/perf/util/pmu.c b/tools/perf/util/pmu.c index 2738fc8d200d..f321ce97d9ec 100644 --- a/tools/perf/util/pmu.c +++ b/tools/perf/util/pmu.c @@ -241,9 +241,11 @@ static int __perf_pmu__new_alias(struct list_head *list, char *dir, char *name, char *metric_expr, char *metric_name) { + struct parse_events_term *term; struct perf_pmu_alias *alias; int ret; int num; + char newval[256]; alias = malloc(sizeof(*alias)); if (!alias) @@ -262,6 +264,27 @@ static int __perf_pmu__new_alias(struct list_head *list, char *dir, char *name, return ret; } + /* Scan event and remove leading zeroes, spaces, newlines, some + * platforms have terms specified as + * event=0x0091 (read from files ..//events/ + * and terms specified as event=0x91 (read from JSON files). + * + * Rebuild string to make alias->str member comparable. + */ + memset(newval, 0, sizeof(newval)); + ret = 0; + list_for_each_entry(term, &alias->terms, list) { + if (ret) + ret += scnprintf(newval + ret, sizeof(newval) - ret, + ","); + if (term->type_val == PARSE_EVENTS__TERM_TYPE_NUM) + ret += scnprintf(newval + ret, sizeof(newval) - ret, + "%s=%#x", term->config, term->val.num); + else if (term->type_val == PARSE_EVENTS__TERM_TYPE_STR) + ret += scnprintf(newval + ret, sizeof(newval) - ret, + "%s=%s", term->config, term->val.str); + } + alias->name = strdup(name); if (dir) { /* @@ -285,7 +308,7 @@ static int __perf_pmu__new_alias(struct list_head *list, char *dir, char *name, snprintf(alias->unit, sizeof(alias->unit), "%s", unit); } alias->per_pkg = perpkg && sscanf(perpkg, "%d", &num) == 1 && num == 1; - alias->str = strdup(val); + alias->str = strdup(newval); list_add_tail(&alias->list, list); -- cgit v1.2.3 From 6dde6429c5ff5b38d6d40a14a6ee105117e6364d Mon Sep 17 00:00:00 2001 From: Thomas Richter Date: Fri, 15 Jun 2018 12:11:05 +0200 Subject: perf stat: Remove duplicate event counting 'perf stat' shows a mismatch in perf stat regarding counter names on s390: Run command: [root@s35lp76 perf]# ./perf stat -e tx_nc_tend -v -- ~/mytesttx 1 >/tmp/111 tx_nc_tend: 1 573146 573146 tx_nc_tend: 1 573146 573146 Performance counter stats for '/root/mytesttx 1': 3 tx_nc_tend 0.001037252 seconds time elapsed [root@s35lp76 perf]# shows transaction counter tx_nc_tend with value 3 but it was triggered only once as seen by the output of mytesttx. When looking up the event name tx_nc_tend the following function sequence is called: parse_events_multi_pmu_add() +--> perf_pmu__scan() being called with NULL argument +--> pmu_read_sysfs() scans directory ../devices/ for all PMUs +--> perf_pmu__find() tries to find a PMU in the global pmu list. +--> pmu_lookup() called to read all file entries when not in global list. pmu_lookup() causes the issue. It calls +---> pmu_aliases() to read all the entries in the PMU directory. On s390 this is named /sys/devices/cpum_cf/events. +--> pmu_aliases_parse() reads all files and creates an alias for each file name. So we end up with first entry created by reading the sysfs file [root@s35lp76 perf]# cat /sys/devices/cpum_cf /events/TX_NC_TEND event=0x008d [root@s35lp76 perf]# Debug output shows this entry tx_nc_tend -> 'cpum_cf'/'event=0x008d '/ After all files in this directory have been read and aliases created this function is called: +--> pmu_add_cpu_aliases() This function looks up the CPU tables created by the json files. With json files for s390 now available all the aliases are added to the PMU alias list a second time. The second entry is added by reading the json file converted by jevent resulting in file pmu-events/pmu-events.c: { .name = "tx_nc_tend", .event = "event=0x8d", .desc = "Unit: cpum_cf Completed TEND \ instructions \ in non-constrained TX mode", .topic = "extended", .long_desc = "A TEND instruction has \ completed in a \ non-constrained \ transactional-execution mode", .pmu = "cpum_cf", }, Debug output shows this entry tx_nc_tend -> 'cpum_cf'/'event=0x8d'/ Function pmu_aliases_parse() and pmu_add_cpu_aliases() both use __perf_pmu__new_alias() to add an alias to the PMU alias list. There is no check if an alias already exist So we end up with 2 entries for tx_nc_tend in the PMU alias list. Having set up the PMU alias list for this PMU now parse_events_multi_add_pmu() reads the complete alias list and adds each alias with parse_events_add_pmu() to the global perfev_list. This causes the alias to be added multiple times to the event list. Fix this by making __perf_pmu__new_alias() to merge alias definitions if an alias is already on the alias list. Also print a debug message when the alias has mismatches in some fields. Output before: [root@s35lp76 perf]# ./perf stat -e tx_nc_tend -v \ -- ~/mytesttx 1 >/tmp/111 tx_nc_tend: 1 551446 551446 Performance counter stats for '/root/mytesttx 1': 3 tx_nc_tend 0.000961134 seconds time elapsed [root@s35lp76 perf]# Output after: [root@s35lp76 perf]# ./perf stat -e tx_nc_tend -v \ -- ~/mytesttx 1 >/tmp/111 tx_nc_tend: 1 551446 551446 Performance counter stats for '/root/mytesttx 1': 1 tx_nc_tend 0.000961134 seconds time elapsed [root@s35lp76 perf]# Signed-off-by: Thomas Richter Reviewed-by: Hendrik Brueckner Reviewed-by: Jiri Olsa Cc: Heiko Carstens Cc: Martin Schwidefsky Link: http://lkml.kernel.org/r/20180615101105.47047-3-tmricht@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/pmu.c | 71 ++++++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 70 insertions(+), 1 deletion(-) diff --git a/tools/perf/util/pmu.c b/tools/perf/util/pmu.c index f321ce97d9ec..3ba6a1742f91 100644 --- a/tools/perf/util/pmu.c +++ b/tools/perf/util/pmu.c @@ -234,6 +234,74 @@ static int perf_pmu__parse_snapshot(struct perf_pmu_alias *alias, return 0; } +static void perf_pmu_assign_str(char *name, const char *field, char **old_str, + char **new_str) +{ + if (!*old_str) + goto set_new; + + if (*new_str) { /* Have new string, check with old */ + if (strcasecmp(*old_str, *new_str)) + pr_debug("alias %s differs in field '%s'\n", + name, field); + zfree(old_str); + } else /* Nothing new --> keep old string */ + return; +set_new: + *old_str = *new_str; + *new_str = NULL; +} + +static void perf_pmu_update_alias(struct perf_pmu_alias *old, + struct perf_pmu_alias *newalias) +{ + perf_pmu_assign_str(old->name, "desc", &old->desc, &newalias->desc); + perf_pmu_assign_str(old->name, "long_desc", &old->long_desc, + &newalias->long_desc); + perf_pmu_assign_str(old->name, "topic", &old->topic, &newalias->topic); + perf_pmu_assign_str(old->name, "metric_expr", &old->metric_expr, + &newalias->metric_expr); + perf_pmu_assign_str(old->name, "metric_name", &old->metric_name, + &newalias->metric_name); + perf_pmu_assign_str(old->name, "value", &old->str, &newalias->str); + old->scale = newalias->scale; + old->per_pkg = newalias->per_pkg; + old->snapshot = newalias->snapshot; + memcpy(old->unit, newalias->unit, sizeof(old->unit)); +} + +/* Delete an alias entry. */ +static void perf_pmu_free_alias(struct perf_pmu_alias *newalias) +{ + zfree(&newalias->name); + zfree(&newalias->desc); + zfree(&newalias->long_desc); + zfree(&newalias->topic); + zfree(&newalias->str); + zfree(&newalias->metric_expr); + zfree(&newalias->metric_name); + parse_events_terms__purge(&newalias->terms); + free(newalias); +} + +/* Merge an alias, search in alias list. If this name is already + * present merge both of them to combine all information. + */ +static bool perf_pmu_merge_alias(struct perf_pmu_alias *newalias, + struct list_head *alist) +{ + struct perf_pmu_alias *a; + + list_for_each_entry(a, alist, list) { + if (!strcasecmp(newalias->name, a->name)) { + perf_pmu_update_alias(a, newalias); + perf_pmu_free_alias(newalias); + return true; + } + } + return false; +} + static int __perf_pmu__new_alias(struct list_head *list, char *dir, char *name, char *desc, char *val, char *long_desc, char *topic, @@ -310,7 +378,8 @@ static int __perf_pmu__new_alias(struct list_head *list, char *dir, char *name, alias->per_pkg = perpkg && sscanf(perpkg, "%d", &num) == 1 && num == 1; alias->str = strdup(newval); - list_add_tail(&alias->list, list); + if (!perf_pmu_merge_alias(alias, list)) + list_add_tail(&alias->list, list); return 0; } -- cgit v1.2.3 From 983107072be1a39cbde67d45cb0059138190e015 Mon Sep 17 00:00:00 2001 From: Jiri Olsa Date: Wed, 20 Jun 2018 11:40:36 +0200 Subject: perf bench: Fix numa report output code Currently we can hit following assert when running numa bench: $ perf bench numa mem -p 3 -t 1 -P 512 -s 100 -zZ0cm --thp 1 perf: bench/numa.c:1577: __bench_numa: Assertion `!(!(((wait_stat) & 0x7f) == 0))' failed. The assertion is correct, because we hit the SIGFPE in following line: Thread 2.2 "thread 0/0" received signal SIGFPE, Arithmetic exception. [Switching to Thread 0x7fffd28c6700 (LWP 11750)] 0x000.. in worker_thread (__tdata=0x7.. ) at bench/numa.c:1257 1257 td->speed_gbs = bytes_done / (td->runtime_ns / NSEC_PER_SEC) / 1e9; We don't check if the runtime is actually bigger than 1 second, and thus this might end up with zero division within FPU. Adding the check to prevent this. Signed-off-by: Jiri Olsa Cc: Alexander Shishkin Cc: David Ahern Cc: Namhyung Kim Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/20180620094036.17278-1-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/bench/numa.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/tools/perf/bench/numa.c b/tools/perf/bench/numa.c index 63eb49082774..44195514b19e 100644 --- a/tools/perf/bench/numa.c +++ b/tools/perf/bench/numa.c @@ -1098,7 +1098,7 @@ static void *worker_thread(void *__tdata) u8 *global_data; u8 *process_data; u8 *thread_data; - u64 bytes_done; + u64 bytes_done, secs; long work_done; u32 l; struct rusage rusage; @@ -1254,7 +1254,8 @@ static void *worker_thread(void *__tdata) timersub(&stop, &start0, &diff); td->runtime_ns = diff.tv_sec * NSEC_PER_SEC; td->runtime_ns += diff.tv_usec * NSEC_PER_USEC; - td->speed_gbs = bytes_done / (td->runtime_ns / NSEC_PER_SEC) / 1e9; + secs = td->runtime_ns / NSEC_PER_SEC; + td->speed_gbs = secs ? bytes_done / secs / 1e9 : 0; getrusage(RUSAGE_THREAD, &rusage); td->system_time_ns = rusage.ru_stime.tv_sec * NSEC_PER_SEC; -- cgit v1.2.3 From 10e9cec905f96fdf47f398be70726e2931b376cd Mon Sep 17 00:00:00 2001 From: Ravi Bangoria Date: Mon, 25 Jun 2018 18:12:18 +0530 Subject: perf script: Add missing output fields in a hint A few fields are missing in a perf script -F hint. Add them. Signed-off-by: Ravi Bangoria Cc: Alexander Shishkin Cc: Andi Kleen Cc: David Ahern Cc: David Carrillo-Cisneros Cc: Jin Yao Cc: Jiri Olsa Cc: Namhyung Kim Link: http://lkml.kernel.org/r/20180625124220.6434-2-ravi.bangoria@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/builtin-script.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/tools/perf/builtin-script.c b/tools/perf/builtin-script.c index a31d7082188e..f3fefbcc4503 100644 --- a/tools/perf/builtin-script.c +++ b/tools/perf/builtin-script.c @@ -3125,8 +3125,9 @@ int cmd_script(int argc, const char **argv) "+field to add and -field to remove." "Valid types: hw,sw,trace,raw,synth. " "Fields: comm,tid,pid,time,cpu,event,trace,ip,sym,dso," - "addr,symoff,period,iregs,uregs,brstack,brstacksym,flags," - "bpf-output,callindent,insn,insnlen,brstackinsn,synth,phys_addr", + "addr,symoff,srcline,period,iregs,uregs,brstack," + "brstacksym,flags,bpf-output,brstackinsn,brstackoff," + "callindent,insn,insnlen,synth,phys_addr,metric,misc", parse_output_fields), OPT_BOOLEAN('a', "all-cpus", &system_wide, "system-wide collection from all CPUs"), -- cgit v1.2.3 From a3af66f51bd0bca72881ead4bf2bd19cb366582b Mon Sep 17 00:00:00 2001 From: Ravi Bangoria Date: Mon, 25 Jun 2018 18:12:19 +0530 Subject: perf script: Fix crash because of missing evsel->priv 'perf script' in piped mode is crashing because evsel->priv is not set properly. Fix it. Before: # perf record -o - -- ls | perf script Segmentation fault (core dumped) # After: # perf record -o - -- ls | perf script ls 2282 1031.731974: 250000 cpu-clock:uhH: 7effe4b3d29e ls 2282 1031.732222: 250000 cpu-clock:uhH: 7effe4b3a650 # Signed-off-by: Ravi Bangoria Tested-by: Arnaldo Carvalho de Melo Cc: Alexander Shishkin Cc: Andi Kleen Cc: David Ahern Cc: David Carrillo-Cisneros Cc: Jin Yao Cc: Jiri Olsa Cc: Namhyung Kim Fixes: a14390fde64e ("perf script: Allow creating per-event dump files") Link: http://lkml.kernel.org/r/20180625124220.6434-3-ravi.bangoria@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/builtin-script.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/tools/perf/builtin-script.c b/tools/perf/builtin-script.c index f3fefbcc4503..ad2ac1300420 100644 --- a/tools/perf/builtin-script.c +++ b/tools/perf/builtin-script.c @@ -1834,6 +1834,7 @@ static int process_attr(struct perf_tool *tool, union perf_event *event, struct perf_evlist *evlist; struct perf_evsel *evsel, *pos; int err; + static struct perf_evsel_script *es; err = perf_event__process_attr(tool, event, pevlist); if (err) @@ -1842,6 +1843,19 @@ static int process_attr(struct perf_tool *tool, union perf_event *event, evlist = *pevlist; evsel = perf_evlist__last(*pevlist); + if (!evsel->priv) { + if (scr->per_event_dump) { + evsel->priv = perf_evsel_script__new(evsel, + scr->session->data); + } else { + es = zalloc(sizeof(*es)); + if (!es) + return -ENOMEM; + es->fp = stdout; + evsel->priv = es; + } + } + if (evsel->attr.type >= PERF_TYPE_MAX && evsel->attr.type != PERF_TYPE_SYNTH) return 0; -- cgit v1.2.3 From 92ead7ee30c80f8852d28735cbcb9d79bc85f715 Mon Sep 17 00:00:00 2001 From: Ravi Bangoria Date: Mon, 25 Jun 2018 18:12:20 +0530 Subject: perf tools: Fix crash caused by accessing feat_ops[HEADER_LAST_FEATURE] perf_event__process_feature() accesses feat_ops[HEADER_LAST_FEATURE] which is not defined and thus perf is crashing. HEADER_LAST_FEATURE is used as an end marker for the perf report but it's unused for perf script/annotate. Ignore HEADER_LAST_FEATURE for perf script/annotate, just like it is done in 'perf report'. Before: # perf record -o - ls | perf script Segmentation fault (core dumped) # After: # perf record -o - ls | perf script Segmentation fault (core dumped) ls 7031 4392.099856: 250000 cpu-clock:uhH: 7f5e0ce7cd60 ls 7031 4392.100355: 250000 cpu-clock:uhH: 7f5e0c706ef7 # Signed-off-by: Ravi Bangoria Cc: Alexander Shishkin Cc: Andi Kleen Cc: David Ahern Cc: David Carrillo-Cisneros Cc: Jin Yao Cc: Jiri Olsa Cc: Namhyung Kim Fixes: 57b5de463925 ("perf report: Support forced leader feature in pipe mode") Link: http://lkml.kernel.org/r/20180625124220.6434-4-ravi.bangoria@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/builtin-annotate.c | 11 ++++++++++- tools/perf/builtin-report.c | 3 ++- tools/perf/builtin-script.c | 11 ++++++++++- tools/perf/util/header.c | 2 +- 4 files changed, 23 insertions(+), 4 deletions(-) diff --git a/tools/perf/builtin-annotate.c b/tools/perf/builtin-annotate.c index 5eb22cc56363..8180319285af 100644 --- a/tools/perf/builtin-annotate.c +++ b/tools/perf/builtin-annotate.c @@ -283,6 +283,15 @@ out_put: return ret; } +static int process_feature_event(struct perf_tool *tool, + union perf_event *event, + struct perf_session *session) +{ + if (event->feat.feat_id < HEADER_LAST_FEATURE) + return perf_event__process_feature(tool, event, session); + return 0; +} + static int hist_entry__tty_annotate(struct hist_entry *he, struct perf_evsel *evsel, struct perf_annotate *ann) @@ -471,7 +480,7 @@ int cmd_annotate(int argc, const char **argv) .attr = perf_event__process_attr, .build_id = perf_event__process_build_id, .tracing_data = perf_event__process_tracing_data, - .feature = perf_event__process_feature, + .feature = process_feature_event, .ordered_events = true, .ordering_requires_timestamps = true, }, diff --git a/tools/perf/builtin-report.c b/tools/perf/builtin-report.c index cdb5b6949832..c04dc7b53797 100644 --- a/tools/perf/builtin-report.c +++ b/tools/perf/builtin-report.c @@ -217,7 +217,8 @@ static int process_feature_event(struct perf_tool *tool, } /* - * All features are received, we can force the + * (feat_id = HEADER_LAST_FEATURE) is the end marker which + * means all features are received, now we can force the * group if needed. */ setup_forced_leader(rep, session->evlist); diff --git a/tools/perf/builtin-script.c b/tools/perf/builtin-script.c index ad2ac1300420..568ddfac3213 100644 --- a/tools/perf/builtin-script.c +++ b/tools/perf/builtin-script.c @@ -3044,6 +3044,15 @@ int process_cpu_map_event(struct perf_tool *tool __maybe_unused, return set_maps(script); } +static int process_feature_event(struct perf_tool *tool, + union perf_event *event, + struct perf_session *session) +{ + if (event->feat.feat_id < HEADER_LAST_FEATURE) + return perf_event__process_feature(tool, event, session); + return 0; +} + #ifdef HAVE_AUXTRACE_SUPPORT static int perf_script__process_auxtrace_info(struct perf_tool *tool, union perf_event *event, @@ -3088,7 +3097,7 @@ int cmd_script(int argc, const char **argv) .attr = process_attr, .event_update = perf_event__process_event_update, .tracing_data = perf_event__process_tracing_data, - .feature = perf_event__process_feature, + .feature = process_feature_event, .build_id = perf_event__process_build_id, .id_index = perf_event__process_id_index, .auxtrace_info = perf_script__process_auxtrace_info, diff --git a/tools/perf/util/header.c b/tools/perf/util/header.c index 59fcc790c865..653ff65aa2c3 100644 --- a/tools/perf/util/header.c +++ b/tools/perf/util/header.c @@ -3464,7 +3464,7 @@ int perf_event__process_feature(struct perf_tool *tool, pr_warning("invalid record type %d in pipe-mode\n", type); return 0; } - if (feat == HEADER_RESERVED || feat > HEADER_LAST_FEATURE) { + if (feat == HEADER_RESERVED || feat >= HEADER_LAST_FEATURE) { pr_warning("invalid record type %d in pipe-mode\n", type); return -1; } -- cgit v1.2.3 From b65c32ec5a942ab3ada93a048089a938918aba7f Mon Sep 17 00:00:00 2001 From: "Maciej S. Szmigiero" Date: Sat, 19 May 2018 14:23:54 +0200 Subject: X.509: unpack RSA signatureValue field from BIT STRING The signatureValue field of a X.509 certificate is encoded as a BIT STRING. For RSA signatures this BIT STRING is of so-called primitive subtype, which contains a u8 prefix indicating a count of unused bits in the encoding. We have to strip this prefix from signature data, just as we already do for key data in x509_extract_key_data() function. This wasn't noticed earlier because this prefix byte is zero for RSA key sizes divisible by 8. Since BIT STRING is a big-endian encoding adding zero prefixes has no bearing on its value. The signature length, however was incorrect, which is a problem for RSA implementations that need it to be exactly correct (like AMD CCP). Signed-off-by: Maciej S. Szmigiero Fixes: c26fd69fa009 ("X.509: Add a crypto key parser for binary (DER) X.509 certificates") Cc: stable@vger.kernel.org Signed-off-by: James Morris --- crypto/asymmetric_keys/x509_cert_parser.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/crypto/asymmetric_keys/x509_cert_parser.c b/crypto/asymmetric_keys/x509_cert_parser.c index 7d81e6bb461a..b6cabac4b62b 100644 --- a/crypto/asymmetric_keys/x509_cert_parser.c +++ b/crypto/asymmetric_keys/x509_cert_parser.c @@ -249,6 +249,15 @@ int x509_note_signature(void *context, size_t hdrlen, return -EINVAL; } + if (strcmp(ctx->cert->sig->pkey_algo, "rsa") == 0) { + /* Discard the BIT STRING metadata */ + if (vlen < 1 || *(const u8 *)value != 0) + return -EBADMSG; + + value++; + vlen--; + } + ctx->cert->raw_sig = value; ctx->cert->raw_sig_size = vlen; return 0; -- cgit v1.2.3 From 90f26cc6bb90b35040f4da0347f480ea9df6e2fc Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Wed, 6 Jun 2018 09:43:27 +0800 Subject: usb: chipidea: host: fix disconnection detect issue The commit 4e88d4c08301 ("usb: add a flag to skip PHY initialization to struct usb_hcd") delete the assignment for hcd->usb_phy, it causes usb_phy_notify_connect{disconnect) are not called, the USB PHY driver is not notified of hot plug event, then the disconnection will not be detected by hardware. Fixes: 4e88d4c08301 ("usb: add a flag to skip PHY initialization to struct usb_hcd") Acked-by: Martin Blumenstingl Reported-by: Mats Karrman Tested-by: Mats Karrman Signed-off-by: Peter Chen --- drivers/usb/chipidea/host.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c index af45aa3222b5..4638d9b066be 100644 --- a/drivers/usb/chipidea/host.c +++ b/drivers/usb/chipidea/host.c @@ -124,8 +124,11 @@ static int host_start(struct ci_hdrc *ci) hcd->power_budget = ci->platdata->power_budget; hcd->tpl_support = ci->platdata->tpl_support; - if (ci->phy || ci->usb_phy) + if (ci->phy || ci->usb_phy) { hcd->skip_phy_initialization = 1; + if (ci->usb_phy) + hcd->usb_phy = ci->usb_phy; + } ehci = hcd_to_ehci(hcd); ehci->caps = ci->hw_bank.cap; -- cgit v1.2.3 From 0ea3fa15b12739c5455cd5850ada4e9948171213 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 25 May 2018 18:08:24 +0200 Subject: qcom: cmd-db: enforce CONFIG_OF_RESERVED_MEM dependency Without CONFIG_OF_RESERVED_MEM, gcc sees that the global cmd_db_header variable is never initialized, and through code optimization concludes that a lot of other code cannot possibly work after that: drivers/soc/qcom/cmd-db.c: In function 'cmd_db_read_addr': drivers/soc/qcom/cmd-db.c:197:21: error: 'ent.addr' may be used uninitialized in this function [-Werror=maybe-uninitialized] return ret < 0 ? 0 : le32_to_cpu(ent.addr); drivers/soc/qcom/cmd-db.c: In function 'cmd_db_read_aux_data': drivers/soc/qcom/cmd-db.c:224:10: error: 'ent.len' may be used uninitialized in this function [-Werror=maybe-uninitialized] ent_len = le16_to_cpu(ent.len); drivers/soc/qcom/cmd-db.c:115:6: error: 'rsc_hdr.data_offset' may be used uninitialized in this function [-Werror=maybe-uninitialized] u16 offset = le16_to_cpu(hdr->data_offset); ^~~~~~ drivers/soc/qcom/cmd-db.c:116:6: error: 'ent.offset' may be used uninitialized in this function [-Werror=maybe-uninitialized] u16 loffset = le16_to_cpu(ent->offset); ^~~~~~~ drivers/soc/qcom/cmd-db.c: In function 'cmd_db_read_aux_data_len': drivers/soc/qcom/cmd-db.c:250:38: error: 'ent.len' may be used uninitialized in this function [-Werror=maybe-uninitialized] return ret < 0 ? 0 : le16_to_cpu(ent.len); ^ drivers/soc/qcom/cmd-db.c: In function 'cmd_db_read_slave_id': drivers/soc/qcom/cmd-db.c:272:7: error: 'ent.addr' may be used uninitialized in this function [-Werror=maybe-uninitialized] Using a hard CONFIG_OF_RESERVED_MEM dependency avoids this warning, and we can remove the CONFIG_OF dependency. Signed-off-by: Arnd Bergmann Reviewed-by: Bjorn Andersson Signed-off-by: Andy Gross --- drivers/soc/qcom/Kconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig index 9dc02f390ba3..5856e792d09c 100644 --- a/drivers/soc/qcom/Kconfig +++ b/drivers/soc/qcom/Kconfig @@ -5,7 +5,8 @@ menu "Qualcomm SoC drivers" config QCOM_COMMAND_DB bool "Qualcomm Command DB" - depends on (ARCH_QCOM && OF) || COMPILE_TEST + depends on ARCH_QCOM || COMPILE_TEST + depends on OF_RESERVED_MEM help Command DB queries shared memory by key string for shared system resources. Platform drivers that require to set state of a shared -- cgit v1.2.3 From 32fdbd90cc03f01d452138bab4d8a120873d6acf Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Tue, 26 Jun 2018 08:43:14 +0200 Subject: tools/headers: Pick up latest kernel ABIs Sync KVM ABI additions and x86 CPU features additions - neither of which has any impact on the tooling build. Cc: Arnaldo Carvalho de Melo Cc: Peter Zijlstra Cc: Namhyung Kim Cc: Jiri Olsa Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar --- tools/arch/arm/include/uapi/asm/kvm.h | 1 + tools/arch/arm64/include/uapi/asm/kvm.h | 1 + tools/arch/powerpc/include/uapi/asm/kvm.h | 1 + tools/arch/x86/include/asm/cpufeatures.h | 2 ++ tools/include/uapi/linux/kvm.h | 1 + 5 files changed, 6 insertions(+) diff --git a/tools/arch/arm/include/uapi/asm/kvm.h b/tools/arch/arm/include/uapi/asm/kvm.h index caae4843cb70..16e006f708ca 100644 --- a/tools/arch/arm/include/uapi/asm/kvm.h +++ b/tools/arch/arm/include/uapi/asm/kvm.h @@ -91,6 +91,7 @@ struct kvm_regs { #define KVM_VGIC_V3_ADDR_TYPE_DIST 2 #define KVM_VGIC_V3_ADDR_TYPE_REDIST 3 #define KVM_VGIC_ITS_ADDR_TYPE 4 +#define KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION 5 #define KVM_VGIC_V3_DIST_SIZE SZ_64K #define KVM_VGIC_V3_REDIST_SIZE (2 * SZ_64K) diff --git a/tools/arch/arm64/include/uapi/asm/kvm.h b/tools/arch/arm64/include/uapi/asm/kvm.h index 04b3256f8e6d..4e76630dd655 100644 --- a/tools/arch/arm64/include/uapi/asm/kvm.h +++ b/tools/arch/arm64/include/uapi/asm/kvm.h @@ -91,6 +91,7 @@ struct kvm_regs { #define KVM_VGIC_V3_ADDR_TYPE_DIST 2 #define KVM_VGIC_V3_ADDR_TYPE_REDIST 3 #define KVM_VGIC_ITS_ADDR_TYPE 4 +#define KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION 5 #define KVM_VGIC_V3_DIST_SIZE SZ_64K #define KVM_VGIC_V3_REDIST_SIZE (2 * SZ_64K) diff --git a/tools/arch/powerpc/include/uapi/asm/kvm.h b/tools/arch/powerpc/include/uapi/asm/kvm.h index 833ed9a16adf..1b32b56a03d3 100644 --- a/tools/arch/powerpc/include/uapi/asm/kvm.h +++ b/tools/arch/powerpc/include/uapi/asm/kvm.h @@ -633,6 +633,7 @@ struct kvm_ppc_cpu_char { #define KVM_REG_PPC_PSSCR (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0xbd) #define KVM_REG_PPC_DEC_EXPIRY (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0xbe) +#define KVM_REG_PPC_ONLINE (KVM_REG_PPC | KVM_REG_SIZE_U32 | 0xbf) /* Transactional Memory checkpointed state: * This is all GPRs, all VSX regs and a subset of SPRs diff --git a/tools/arch/x86/include/asm/cpufeatures.h b/tools/arch/x86/include/asm/cpufeatures.h index fb00a2fca990..5701f5cecd31 100644 --- a/tools/arch/x86/include/asm/cpufeatures.h +++ b/tools/arch/x86/include/asm/cpufeatures.h @@ -282,7 +282,9 @@ #define X86_FEATURE_AMD_IBPB (13*32+12) /* "" Indirect Branch Prediction Barrier */ #define X86_FEATURE_AMD_IBRS (13*32+14) /* "" Indirect Branch Restricted Speculation */ #define X86_FEATURE_AMD_STIBP (13*32+15) /* "" Single Thread Indirect Branch Predictors */ +#define X86_FEATURE_AMD_SSBD (13*32+24) /* "" Speculative Store Bypass Disable */ #define X86_FEATURE_VIRT_SSBD (13*32+25) /* Virtualized Speculative Store Bypass Disable */ +#define X86_FEATURE_AMD_SSB_NO (13*32+26) /* "" Speculative Store Bypass is fixed in hardware. */ /* Thermal and Power Management Leaf, CPUID level 0x00000006 (EAX), word 14 */ #define X86_FEATURE_DTHERM (14*32+ 0) /* Digital Thermal Sensor */ diff --git a/tools/include/uapi/linux/kvm.h b/tools/include/uapi/linux/kvm.h index 39e364c70caf..b6270a3b38e9 100644 --- a/tools/include/uapi/linux/kvm.h +++ b/tools/include/uapi/linux/kvm.h @@ -948,6 +948,7 @@ struct kvm_ppc_resize_hpt { #define KVM_CAP_S390_BPB 152 #define KVM_CAP_GET_MSR_FEATURES 153 #define KVM_CAP_HYPERV_EVENTFD 154 +#define KVM_CAP_HYPERV_TLBFLUSH 155 #ifdef KVM_CAP_IRQ_ROUTING -- cgit v1.2.3 From 4188f063e3694ccbf2a2044cf17cc325f91e458f Mon Sep 17 00:00:00 2001 From: Dmitry Vyukov Date: Mon, 25 Jun 2018 14:38:08 +0200 Subject: x86/mm: Get rid of KERN_CONT in show_fault_oops() KERN_CONT leads to split lines in kernel output and complicates useful changes to printk like printing context before each line. Only acceptable use of continuations is basically boot-time testing. Get rid of it. Signed-off-by: Dmitry Vyukov Reviewed-by: Sergey Senozhatsky Cc: Andy Lutomirski Cc: Borislav Petkov Cc: Brian Gerst Cc: Denys Vlasenko Cc: H. Peter Anvin Cc: Josh Poimboeuf Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/20180625123808.227417-1-dvyukov@gmail.com [ Removed unnecessary parentheses and prettified the printk statement. ] Signed-off-by: Ingo Molnar --- arch/x86/mm/fault.c | 10 +++------- 1 file changed, 3 insertions(+), 7 deletions(-) diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c index 9a84a0d08727..ee85766e6329 100644 --- a/arch/x86/mm/fault.c +++ b/arch/x86/mm/fault.c @@ -671,13 +671,9 @@ show_fault_oops(struct pt_regs *regs, unsigned long error_code, printk(smep_warning, from_kuid(&init_user_ns, current_uid())); } - printk(KERN_ALERT "BUG: unable to handle kernel "); - if (address < PAGE_SIZE) - printk(KERN_CONT "NULL pointer dereference"); - else - printk(KERN_CONT "paging request"); - - printk(KERN_CONT " at %px\n", (void *) address); + pr_alert("BUG: unable to handle kernel %s at %px\n", + address < PAGE_SIZE ? "NULL pointer dereference" : "paging request", + (void *)address); dump_pagetable(address); } -- cgit v1.2.3 From 236f0cd286b67291796362feeac4f342900cfa82 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Mon, 25 Jun 2018 04:21:59 -0600 Subject: x86/entry/32: Add explicit 'l' instruction suffix Omitting suffixes from instructions in AT&T mode is bad practice when operand size cannot be determined by the assembler from register operands, and is likely going to be warned about by upstream GAS in the future (mine does already). Add the single missing 'l' suffix here. Signed-off-by: Jan Beulich Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Andy Lutomirski Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/5B30C24702000078001CD6A6@prv1-mh.provo.novell.com Signed-off-by: Ingo Molnar --- arch/x86/entry/entry_32.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/entry/entry_32.S b/arch/x86/entry/entry_32.S index 2582881d19ce..c371bfee137a 100644 --- a/arch/x86/entry/entry_32.S +++ b/arch/x86/entry/entry_32.S @@ -477,7 +477,7 @@ ENTRY(entry_SYSENTER_32) * whereas POPF does not.) */ addl $PT_EFLAGS-PT_DS, %esp /* point esp at pt_regs->flags */ - btr $X86_EFLAGS_IF_BIT, (%esp) + btrl $X86_EFLAGS_IF_BIT, (%esp) popfl /* -- cgit v1.2.3 From 0e311d237d7f3022b7dafb639b42541bfb42fe94 Mon Sep 17 00:00:00 2001 From: Andrey Ryabinin Date: Mon, 25 Jun 2018 13:24:27 +0300 Subject: x86/mm: Don't free P4D table when it is folded at runtime When the P4D page table layer is folded at runtime, the p4d_free() should do nothing, the same as in . It seems this bug should cause double-free in efi_call_phys_epilog(), but I don't know how to trigger that code path, so I can't confirm that by testing. Signed-off-by: Andrey Ryabinin Reviewed-by: Kirill A. Shutemov Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: stable@vger.kernel.org # 4.17 Fixes: 98219dda2ab5 ("x86/mm: Fold p4d page table layer at runtime") Link: http://lkml.kernel.org/r/20180625102427.15015-1-aryabinin@virtuozzo.com Signed-off-by: Ingo Molnar --- arch/x86/include/asm/pgalloc.h | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/x86/include/asm/pgalloc.h b/arch/x86/include/asm/pgalloc.h index ada6410fd2ec..fbd578daa66e 100644 --- a/arch/x86/include/asm/pgalloc.h +++ b/arch/x86/include/asm/pgalloc.h @@ -184,6 +184,9 @@ static inline p4d_t *p4d_alloc_one(struct mm_struct *mm, unsigned long addr) static inline void p4d_free(struct mm_struct *mm, p4d_t *p4d) { + if (!pgtable_l5_enabled()) + return; + BUG_ON((unsigned long)p4d & (PAGE_SIZE-1)); free_page((unsigned long)p4d); } -- cgit v1.2.3 From 01a9e9493fb3f65c07077d59cf8ba8b6d2e0463e Mon Sep 17 00:00:00 2001 From: Christophe JAILLET Date: Mon, 11 Jun 2018 18:53:35 +0200 Subject: drm/meson: Fix an un-handled error path in 'meson_drv_bind_master()' If 'platform_get_resource_byname()' fails, we should release some resources before leaving, as already done in the other error handling path of the function. Fixes: acaa3f13b8dd ("drm/meson: Fix potential NULL dereference in meson_drv_bind_master()") Signed-off-by: Christophe JAILLET Acked-by: Neil Armstrong Signed-off-by: Neil Armstrong Link: https://patchwork.freedesktop.org/patch/msgid/20180611165335.24542-1-christophe.jaillet@wanadoo.fr --- drivers/gpu/drm/meson/meson_drv.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/meson/meson_drv.c b/drivers/gpu/drm/meson/meson_drv.c index 32b1a6cdecfc..d3443125e661 100644 --- a/drivers/gpu/drm/meson/meson_drv.c +++ b/drivers/gpu/drm/meson/meson_drv.c @@ -197,8 +197,10 @@ static int meson_drv_bind_master(struct device *dev, bool has_components) priv->io_base = regs; res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "hhi"); - if (!res) - return -EINVAL; + if (!res) { + ret = -EINVAL; + goto free_drm; + } /* Simply ioremap since it may be a shared register zone */ regs = devm_ioremap(dev, res->start, resource_size(res)); if (!regs) { @@ -215,8 +217,10 @@ static int meson_drv_bind_master(struct device *dev, bool has_components) } res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dmc"); - if (!res) - return -EINVAL; + if (!res) { + ret = -EINVAL; + goto free_drm; + } /* Simply ioremap since it may be a shared register zone */ regs = devm_ioremap(dev, res->start, resource_size(res)); if (!regs) { -- cgit v1.2.3 From 0ee1f4734967af8321ecebaf9c74221ace34f2d5 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Mon, 25 Jun 2018 09:26:27 +0200 Subject: r8152: napi hangup fix after disconnect When unplugging an r8152 adapter while the interface is UP, the NIC becomes unusable. usb->disconnect (aka rtl8152_disconnect) deletes napi. Then, rtl8152_disconnect calls unregister_netdev and that invokes netdev->ndo_stop (aka rtl8152_close). rtl8152_close tries to napi_disable, but the napi is already deleted by disconnect above. So the first while loop in napi_disable never finishes. This results in complete deadlock of the network layer as there is rtnl_mutex held by unregister_netdev. So avoid the call to napi_disable in rtl8152_close when the device is already gone. The other calls to usb_kill_urb, cancel_delayed_work_sync, netif_stop_queue etc. seem to be fine. The urb and netdev is not destroyed yet. Signed-off-by: Jiri Slaby Cc: linux-usb@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller --- drivers/net/usb/r8152.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index 86f7196f9d91..2a58607a6aea 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -3962,7 +3962,8 @@ static int rtl8152_close(struct net_device *netdev) #ifdef CONFIG_PM_SLEEP unregister_pm_notifier(&tp->pm_notifier); #endif - napi_disable(&tp->napi); + if (!test_bit(RTL8152_UNPLUG, &tp->flags)) + napi_disable(&tp->napi); clear_bit(WORK_ENABLE, &tp->flags); usb_kill_urb(tp->intr_urb); cancel_delayed_work_sync(&tp->schedule); -- cgit v1.2.3 From fdb5c4531c1e0e50e609df83f736b6f3a02896e2 Mon Sep 17 00:00:00 2001 From: Sean Young Date: Tue, 19 Jun 2018 00:04:24 +0100 Subject: bpf: fix attach type BPF_LIRC_MODE2 dependency wrt CONFIG_CGROUP_BPF If the kernel is compiled with CONFIG_CGROUP_BPF not enabled, it is not possible to attach, detach or query IR BPF programs to /dev/lircN devices, making them impossible to use. For embedded devices, it should be possible to use IR decoding without cgroups or CONFIG_CGROUP_BPF enabled. This change requires some refactoring, since bpf_prog_{attach,detach,query} functions are now always compiled, but their code paths for cgroups need moving out. Rather than a #ifdef CONFIG_CGROUP_BPF in kernel/bpf/syscall.c, moving them to kernel/bpf/cgroup.c and kernel/bpf/sockmap.c does not require #ifdefs since that is already conditionally compiled. Fixes: f4364dcfc86d ("media: rc: introduce BPF_PROG_LIRC_MODE2") Signed-off-by: Sean Young Signed-off-by: Daniel Borkmann --- drivers/media/rc/bpf-lirc.c | 14 +------ include/linux/bpf-cgroup.h | 26 ++++++++++++ include/linux/bpf.h | 8 ++++ include/linux/bpf_lirc.h | 5 ++- kernel/bpf/cgroup.c | 54 +++++++++++++++++++++++++ kernel/bpf/sockmap.c | 18 +++++++++ kernel/bpf/syscall.c | 99 ++++++++++----------------------------------- 7 files changed, 132 insertions(+), 92 deletions(-) diff --git a/drivers/media/rc/bpf-lirc.c b/drivers/media/rc/bpf-lirc.c index 40826bba06b6..fcfab6635f9c 100644 --- a/drivers/media/rc/bpf-lirc.c +++ b/drivers/media/rc/bpf-lirc.c @@ -207,29 +207,19 @@ void lirc_bpf_free(struct rc_dev *rcdev) bpf_prog_array_free(rcdev->raw->progs); } -int lirc_prog_attach(const union bpf_attr *attr) +int lirc_prog_attach(const union bpf_attr *attr, struct bpf_prog *prog) { - struct bpf_prog *prog; struct rc_dev *rcdev; int ret; if (attr->attach_flags) return -EINVAL; - prog = bpf_prog_get_type(attr->attach_bpf_fd, - BPF_PROG_TYPE_LIRC_MODE2); - if (IS_ERR(prog)) - return PTR_ERR(prog); - rcdev = rc_dev_get_from_fd(attr->target_fd); - if (IS_ERR(rcdev)) { - bpf_prog_put(prog); + if (IS_ERR(rcdev)) return PTR_ERR(rcdev); - } ret = lirc_bpf_attach(rcdev, prog); - if (ret) - bpf_prog_put(prog); put_device(&rcdev->dev); diff --git a/include/linux/bpf-cgroup.h b/include/linux/bpf-cgroup.h index 975fb4cf1bb7..79795c5fa7c3 100644 --- a/include/linux/bpf-cgroup.h +++ b/include/linux/bpf-cgroup.h @@ -188,12 +188,38 @@ int __cgroup_bpf_check_dev_permission(short dev_type, u32 major, u32 minor, \ __ret; \ }) +int cgroup_bpf_prog_attach(const union bpf_attr *attr, + enum bpf_prog_type ptype, struct bpf_prog *prog); +int cgroup_bpf_prog_detach(const union bpf_attr *attr, + enum bpf_prog_type ptype); +int cgroup_bpf_prog_query(const union bpf_attr *attr, + union bpf_attr __user *uattr); #else +struct bpf_prog; struct cgroup_bpf {}; static inline void cgroup_bpf_put(struct cgroup *cgrp) {} static inline int cgroup_bpf_inherit(struct cgroup *cgrp) { return 0; } +static inline int cgroup_bpf_prog_attach(const union bpf_attr *attr, + enum bpf_prog_type ptype, + struct bpf_prog *prog) +{ + return -EINVAL; +} + +static inline int cgroup_bpf_prog_detach(const union bpf_attr *attr, + enum bpf_prog_type ptype) +{ + return -EINVAL; +} + +static inline int cgroup_bpf_prog_query(const union bpf_attr *attr, + union bpf_attr __user *uattr) +{ + return -EINVAL; +} + #define cgroup_bpf_enabled (0) #define BPF_CGROUP_PRE_CONNECT_ENABLED(sk) (0) #define BPF_CGROUP_RUN_PROG_INET_INGRESS(sk,skb) ({ 0; }) diff --git a/include/linux/bpf.h b/include/linux/bpf.h index 7df32a3200f7..8827e797ff97 100644 --- a/include/linux/bpf.h +++ b/include/linux/bpf.h @@ -696,6 +696,8 @@ static inline void bpf_map_offload_map_free(struct bpf_map *map) struct sock *__sock_map_lookup_elem(struct bpf_map *map, u32 key); struct sock *__sock_hash_lookup_elem(struct bpf_map *map, void *key); int sock_map_prog(struct bpf_map *map, struct bpf_prog *prog, u32 type); +int sockmap_get_from_fd(const union bpf_attr *attr, int type, + struct bpf_prog *prog); #else static inline struct sock *__sock_map_lookup_elem(struct bpf_map *map, u32 key) { @@ -714,6 +716,12 @@ static inline int sock_map_prog(struct bpf_map *map, { return -EOPNOTSUPP; } + +static inline int sockmap_get_from_fd(const union bpf_attr *attr, int type, + struct bpf_prog *prog) +{ + return -EINVAL; +} #endif #if defined(CONFIG_XDP_SOCKETS) diff --git a/include/linux/bpf_lirc.h b/include/linux/bpf_lirc.h index 5f8a4283092d..9d9ff755ec29 100644 --- a/include/linux/bpf_lirc.h +++ b/include/linux/bpf_lirc.h @@ -5,11 +5,12 @@ #include #ifdef CONFIG_BPF_LIRC_MODE2 -int lirc_prog_attach(const union bpf_attr *attr); +int lirc_prog_attach(const union bpf_attr *attr, struct bpf_prog *prog); int lirc_prog_detach(const union bpf_attr *attr); int lirc_prog_query(const union bpf_attr *attr, union bpf_attr __user *uattr); #else -static inline int lirc_prog_attach(const union bpf_attr *attr) +static inline int lirc_prog_attach(const union bpf_attr *attr, + struct bpf_prog *prog) { return -EINVAL; } diff --git a/kernel/bpf/cgroup.c b/kernel/bpf/cgroup.c index f7c00bd6f8e4..3d83ee7df381 100644 --- a/kernel/bpf/cgroup.c +++ b/kernel/bpf/cgroup.c @@ -428,6 +428,60 @@ int __cgroup_bpf_query(struct cgroup *cgrp, const union bpf_attr *attr, return ret; } +int cgroup_bpf_prog_attach(const union bpf_attr *attr, + enum bpf_prog_type ptype, struct bpf_prog *prog) +{ + struct cgroup *cgrp; + int ret; + + cgrp = cgroup_get_from_fd(attr->target_fd); + if (IS_ERR(cgrp)) + return PTR_ERR(cgrp); + + ret = cgroup_bpf_attach(cgrp, prog, attr->attach_type, + attr->attach_flags); + cgroup_put(cgrp); + return ret; +} + +int cgroup_bpf_prog_detach(const union bpf_attr *attr, enum bpf_prog_type ptype) +{ + struct bpf_prog *prog; + struct cgroup *cgrp; + int ret; + + cgrp = cgroup_get_from_fd(attr->target_fd); + if (IS_ERR(cgrp)) + return PTR_ERR(cgrp); + + prog = bpf_prog_get_type(attr->attach_bpf_fd, ptype); + if (IS_ERR(prog)) + prog = NULL; + + ret = cgroup_bpf_detach(cgrp, prog, attr->attach_type, 0); + if (prog) + bpf_prog_put(prog); + + cgroup_put(cgrp); + return ret; +} + +int cgroup_bpf_prog_query(const union bpf_attr *attr, + union bpf_attr __user *uattr) +{ + struct cgroup *cgrp; + int ret; + + cgrp = cgroup_get_from_fd(attr->query.target_fd); + if (IS_ERR(cgrp)) + return PTR_ERR(cgrp); + + ret = cgroup_bpf_query(cgrp, attr, uattr); + + cgroup_put(cgrp); + return ret; +} + /** * __cgroup_bpf_run_filter_skb() - Run a program for packet filtering * @sk: The socket sending or receiving traffic diff --git a/kernel/bpf/sockmap.c b/kernel/bpf/sockmap.c index 52a91d816c0e..81d0c55a77aa 100644 --- a/kernel/bpf/sockmap.c +++ b/kernel/bpf/sockmap.c @@ -1915,6 +1915,24 @@ int sock_map_prog(struct bpf_map *map, struct bpf_prog *prog, u32 type) return 0; } +int sockmap_get_from_fd(const union bpf_attr *attr, int type, + struct bpf_prog *prog) +{ + int ufd = attr->target_fd; + struct bpf_map *map; + struct fd f; + int err; + + f = fdget(ufd); + map = __bpf_map_get(f); + if (IS_ERR(map)) + return PTR_ERR(map); + + err = sock_map_prog(map, prog, attr->attach_type); + fdput(f); + return err; +} + static void *sock_map_lookup(struct bpf_map *map, void *key) { return NULL; diff --git a/kernel/bpf/syscall.c b/kernel/bpf/syscall.c index 35dc466641f2..d10ecd78105f 100644 --- a/kernel/bpf/syscall.c +++ b/kernel/bpf/syscall.c @@ -1483,8 +1483,6 @@ out_free_tp: return err; } -#ifdef CONFIG_CGROUP_BPF - static int bpf_prog_attach_check_attach_type(const struct bpf_prog *prog, enum bpf_attach_type attach_type) { @@ -1499,40 +1497,6 @@ static int bpf_prog_attach_check_attach_type(const struct bpf_prog *prog, #define BPF_PROG_ATTACH_LAST_FIELD attach_flags -static int sockmap_get_from_fd(const union bpf_attr *attr, - int type, bool attach) -{ - struct bpf_prog *prog = NULL; - int ufd = attr->target_fd; - struct bpf_map *map; - struct fd f; - int err; - - f = fdget(ufd); - map = __bpf_map_get(f); - if (IS_ERR(map)) - return PTR_ERR(map); - - if (attach) { - prog = bpf_prog_get_type(attr->attach_bpf_fd, type); - if (IS_ERR(prog)) { - fdput(f); - return PTR_ERR(prog); - } - } - - err = sock_map_prog(map, prog, attr->attach_type); - if (err) { - fdput(f); - if (prog) - bpf_prog_put(prog); - return err; - } - - fdput(f); - return 0; -} - #define BPF_F_ATTACH_MASK \ (BPF_F_ALLOW_OVERRIDE | BPF_F_ALLOW_MULTI) @@ -1540,7 +1504,6 @@ static int bpf_prog_attach(const union bpf_attr *attr) { enum bpf_prog_type ptype; struct bpf_prog *prog; - struct cgroup *cgrp; int ret; if (!capable(CAP_NET_ADMIN)) @@ -1577,12 +1540,15 @@ static int bpf_prog_attach(const union bpf_attr *attr) ptype = BPF_PROG_TYPE_CGROUP_DEVICE; break; case BPF_SK_MSG_VERDICT: - return sockmap_get_from_fd(attr, BPF_PROG_TYPE_SK_MSG, true); + ptype = BPF_PROG_TYPE_SK_MSG; + break; case BPF_SK_SKB_STREAM_PARSER: case BPF_SK_SKB_STREAM_VERDICT: - return sockmap_get_from_fd(attr, BPF_PROG_TYPE_SK_SKB, true); + ptype = BPF_PROG_TYPE_SK_SKB; + break; case BPF_LIRC_MODE2: - return lirc_prog_attach(attr); + ptype = BPF_PROG_TYPE_LIRC_MODE2; + break; default: return -EINVAL; } @@ -1596,18 +1562,20 @@ static int bpf_prog_attach(const union bpf_attr *attr) return -EINVAL; } - cgrp = cgroup_get_from_fd(attr->target_fd); - if (IS_ERR(cgrp)) { - bpf_prog_put(prog); - return PTR_ERR(cgrp); + switch (ptype) { + case BPF_PROG_TYPE_SK_SKB: + case BPF_PROG_TYPE_SK_MSG: + ret = sockmap_get_from_fd(attr, ptype, prog); + break; + case BPF_PROG_TYPE_LIRC_MODE2: + ret = lirc_prog_attach(attr, prog); + break; + default: + ret = cgroup_bpf_prog_attach(attr, ptype, prog); } - ret = cgroup_bpf_attach(cgrp, prog, attr->attach_type, - attr->attach_flags); if (ret) bpf_prog_put(prog); - cgroup_put(cgrp); - return ret; } @@ -1616,9 +1584,6 @@ static int bpf_prog_attach(const union bpf_attr *attr) static int bpf_prog_detach(const union bpf_attr *attr) { enum bpf_prog_type ptype; - struct bpf_prog *prog; - struct cgroup *cgrp; - int ret; if (!capable(CAP_NET_ADMIN)) return -EPERM; @@ -1651,29 +1616,17 @@ static int bpf_prog_detach(const union bpf_attr *attr) ptype = BPF_PROG_TYPE_CGROUP_DEVICE; break; case BPF_SK_MSG_VERDICT: - return sockmap_get_from_fd(attr, BPF_PROG_TYPE_SK_MSG, false); + return sockmap_get_from_fd(attr, BPF_PROG_TYPE_SK_MSG, NULL); case BPF_SK_SKB_STREAM_PARSER: case BPF_SK_SKB_STREAM_VERDICT: - return sockmap_get_from_fd(attr, BPF_PROG_TYPE_SK_SKB, false); + return sockmap_get_from_fd(attr, BPF_PROG_TYPE_SK_SKB, NULL); case BPF_LIRC_MODE2: return lirc_prog_detach(attr); default: return -EINVAL; } - cgrp = cgroup_get_from_fd(attr->target_fd); - if (IS_ERR(cgrp)) - return PTR_ERR(cgrp); - - prog = bpf_prog_get_type(attr->attach_bpf_fd, ptype); - if (IS_ERR(prog)) - prog = NULL; - - ret = cgroup_bpf_detach(cgrp, prog, attr->attach_type, 0); - if (prog) - bpf_prog_put(prog); - cgroup_put(cgrp); - return ret; + return cgroup_bpf_prog_detach(attr, ptype); } #define BPF_PROG_QUERY_LAST_FIELD query.prog_cnt @@ -1681,9 +1634,6 @@ static int bpf_prog_detach(const union bpf_attr *attr) static int bpf_prog_query(const union bpf_attr *attr, union bpf_attr __user *uattr) { - struct cgroup *cgrp; - int ret; - if (!capable(CAP_NET_ADMIN)) return -EPERM; if (CHECK_ATTR(BPF_PROG_QUERY)) @@ -1711,14 +1661,9 @@ static int bpf_prog_query(const union bpf_attr *attr, default: return -EINVAL; } - cgrp = cgroup_get_from_fd(attr->query.target_fd); - if (IS_ERR(cgrp)) - return PTR_ERR(cgrp); - ret = cgroup_bpf_query(cgrp, attr, uattr); - cgroup_put(cgrp); - return ret; + + return cgroup_bpf_prog_query(attr, uattr); } -#endif /* CONFIG_CGROUP_BPF */ #define BPF_PROG_TEST_RUN_LAST_FIELD test.duration @@ -2365,7 +2310,6 @@ SYSCALL_DEFINE3(bpf, int, cmd, union bpf_attr __user *, uattr, unsigned int, siz case BPF_OBJ_GET: err = bpf_obj_get(&attr); break; -#ifdef CONFIG_CGROUP_BPF case BPF_PROG_ATTACH: err = bpf_prog_attach(&attr); break; @@ -2375,7 +2319,6 @@ SYSCALL_DEFINE3(bpf, int, cmd, union bpf_attr __user *, uattr, unsigned int, siz case BPF_PROG_QUERY: err = bpf_prog_query(&attr, uattr); break; -#endif case BPF_PROG_TEST_RUN: err = bpf_prog_test_run(&attr, uattr); break; -- cgit v1.2.3 From 5fadfc61934a33d362ca47c7f70786105d5681c1 Mon Sep 17 00:00:00 2001 From: Anders Roxell Date: Mon, 25 Jun 2018 16:56:05 +0200 Subject: selftests: bpf: add missing NET_SCHED to config CONFIG_NET_SCHED wasn't enabled in arm64's defconfig only for x86. So bpf/test_tunnel.sh tests fails with: RTNETLINK answers: Operation not supported RTNETLINK answers: Operation not supported We have an error talking to the kernel, -1 Enable NET_SCHED and more tests pass. Fixes: 3bce593ac06b ("selftests: bpf: config: add config fragments") Signed-off-by: Anders Roxell Acked-by: Song Liu Signed-off-by: Daniel Borkmann --- tools/testing/selftests/bpf/config | 1 + 1 file changed, 1 insertion(+) diff --git a/tools/testing/selftests/bpf/config b/tools/testing/selftests/bpf/config index 7eb613ffef55..b4994a94968b 100644 --- a/tools/testing/selftests/bpf/config +++ b/tools/testing/selftests/bpf/config @@ -6,6 +6,7 @@ CONFIG_TEST_BPF=m CONFIG_CGROUP_BPF=y CONFIG_NETDEVSIM=m CONFIG_NET_CLS_ACT=y +CONFIG_NET_SCHED=y CONFIG_NET_SCH_INGRESS=y CONFIG_NET_IPIP=y CONFIG_IPV6=y -- cgit v1.2.3 From b0e4b8bcd48bde31690f066044767475b2e4852b Mon Sep 17 00:00:00 2001 From: Jeffrin Jose T Date: Sat, 23 Jun 2018 00:24:17 +0530 Subject: selftests: bpf: notification about privilege required to run test_lirc_mode2.sh testing script The test_lirc_mode2.sh script require root privilege for the successful execution of the test. This patch is to notify the user about the privilege the script demands for the successful execution of the test. Signed-off-by: Jeffrin Jose T (Rajagiri SET) Acked-by: Song Liu Signed-off-by: Daniel Borkmann --- tools/testing/selftests/bpf/test_lirc_mode2.sh | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/tools/testing/selftests/bpf/test_lirc_mode2.sh b/tools/testing/selftests/bpf/test_lirc_mode2.sh index ce2e15e4f976..677686198df3 100755 --- a/tools/testing/selftests/bpf/test_lirc_mode2.sh +++ b/tools/testing/selftests/bpf/test_lirc_mode2.sh @@ -1,6 +1,15 @@ #!/bin/bash # SPDX-License-Identifier: GPL-2.0 +# Kselftest framework requirement - SKIP code is 4. +ksft_skip=4 + +msg="skip all tests:" +if [ $UID != 0 ]; then + echo $msg please run this as root >&2 + exit $ksft_skip +fi + GREEN='\033[0;92m' RED='\033[0;31m' NC='\033[0m' # No Color -- cgit v1.2.3 From dd349c3ffd93d15d01f4f5ace73870ca45ea249d Mon Sep 17 00:00:00 2001 From: Jeffrin Jose T Date: Sat, 23 Jun 2018 03:10:32 +0530 Subject: selftests: bpf: notification about privilege required to run test_lwt_seg6local.sh testing script This test needs root privilege for it's successful execution. This patch is atleast used to notify the user about the privilege the script demands for the smooth execution of the test. Signed-off-by: Jeffrin Jose T (Rajagiri SET) Acked-by: Song Liu Signed-off-by: Daniel Borkmann --- tools/testing/selftests/bpf/test_lwt_seg6local.sh | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/tools/testing/selftests/bpf/test_lwt_seg6local.sh b/tools/testing/selftests/bpf/test_lwt_seg6local.sh index 1c77994b5e71..270fa8f49573 100755 --- a/tools/testing/selftests/bpf/test_lwt_seg6local.sh +++ b/tools/testing/selftests/bpf/test_lwt_seg6local.sh @@ -21,6 +21,15 @@ # An UDP datagram is sent from fb00::1 to fb00::6. The test succeeds if this # datagram can be read on NS6 when binding to fb00::6. +# Kselftest framework requirement - SKIP code is 4. +ksft_skip=4 + +msg="skip all tests:" +if [ $UID != 0 ]; then + echo $msg please run this as root >&2 + exit $ksft_skip +fi + TMP_FILE="/tmp/selftest_lwt_seg6local.txt" cleanup() -- cgit v1.2.3 From 6f6f42466d902c92f21b46a45e6af22d1d663607 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Mon, 25 Jun 2018 08:17:33 -0500 Subject: PCI: shpchp: Manage SHPC unconditionally on non-ACPI systems An SHPC can be operated either by platform firmware or by the OS. The OS uses a host bridge ACPI _OSC method to negotiate for control of SHPC. If firmware wants to prevent an OS from operating an SHPC, it must supply an _OSC method that declines to grant SHPC ownership to the OS. If acpi_pci_find_root() returns NULL, it means there's no ACPI host bridge device (PNP0A03 or PNP0A08) and hence no _OSC method, so the OS is always allowed to manage the SHPC. Fix a NULL pointer dereference when CONFIG_ACPI=y but the current hardware/firmware platform doesn't support ACPI. In that case, acpi_get_hp_hw_control_from_firmware() is implemented but acpi_pci_find_root() returns NULL. Fixes: 90cc0c3cc709 ("PCI: shpchp: Add shpchp_is_native()") Link: https://lkml.kernel.org/r/20180621164715.28160-1-marc.zyngier@arm.com Reported-by: Marc Zyngier Tested-by: Marc Zyngier Signed-off-by: Bjorn Helgaas Reviewed-by: Mika Westerberg --- drivers/pci/hotplug/acpi_pcihp.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/pci/hotplug/acpi_pcihp.c b/drivers/pci/hotplug/acpi_pcihp.c index 3979f89b250a..5bd6c1573295 100644 --- a/drivers/pci/hotplug/acpi_pcihp.c +++ b/drivers/pci/hotplug/acpi_pcihp.c @@ -7,7 +7,6 @@ * All rights reserved. * * Send feedback to - * */ #include @@ -87,8 +86,17 @@ int acpi_get_hp_hw_control_from_firmware(struct pci_dev *pdev) return 0; /* If _OSC exists, we should not evaluate OSHP */ + + /* + * If there's no ACPI host bridge (i.e., ACPI support is compiled + * into the kernel but the hardware platform doesn't support ACPI), + * there's nothing to do here. + */ host = pci_find_host_bridge(pdev->bus); root = acpi_pci_find_root(ACPI_HANDLE(&host->dev)); + if (!root) + return 0; + if (root->osc_support_set) goto no_control; -- cgit v1.2.3 From 941c06d58503b9f2718b20bc45ee7f1d701a1e1e Mon Sep 17 00:00:00 2001 From: "Aneesh Kumar K.V" Date: Mon, 25 Jun 2018 13:45:09 +0530 Subject: powerpc/mm/32: Fix pgtable_page_dtor call Commit 667416f38554 ("powerpc/mm: Fix kernel crash on page table free") added a call for pgtable_page_dtor in the rcu page table free routine. We missed the fact that for 32 bit platforms we did call the 'dtor' early. Drop the extra call for pgtable_page_dtor. We remove the call from __pte_free_tlb so that we do the page table free and 'dtor' call together. This should help when we switch these platforms to pte fragments. Fixes: 667416f38554 ("powerpc/mm: Fix kernel crash on page table free") Reported-by: Christophe Leroy Signed-off-by: Aneesh Kumar K.V Signed-off-by: Michael Ellerman --- arch/powerpc/include/asm/book3s/32/pgalloc.h | 1 - arch/powerpc/include/asm/nohash/32/pgalloc.h | 1 - 2 files changed, 2 deletions(-) diff --git a/arch/powerpc/include/asm/book3s/32/pgalloc.h b/arch/powerpc/include/asm/book3s/32/pgalloc.h index e4633803fe43..82e44b1a00ae 100644 --- a/arch/powerpc/include/asm/book3s/32/pgalloc.h +++ b/arch/powerpc/include/asm/book3s/32/pgalloc.h @@ -138,7 +138,6 @@ static inline void pgtable_free_tlb(struct mmu_gather *tlb, static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t table, unsigned long address) { - pgtable_page_dtor(table); pgtable_free_tlb(tlb, page_address(table), 0); } #endif /* _ASM_POWERPC_BOOK3S_32_PGALLOC_H */ diff --git a/arch/powerpc/include/asm/nohash/32/pgalloc.h b/arch/powerpc/include/asm/nohash/32/pgalloc.h index 9de40eb614da..8825953c225b 100644 --- a/arch/powerpc/include/asm/nohash/32/pgalloc.h +++ b/arch/powerpc/include/asm/nohash/32/pgalloc.h @@ -140,7 +140,6 @@ static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t table, unsigned long address) { tlb_flush_pgtable(tlb, address); - pgtable_page_dtor(table); pgtable_free_tlb(tlb, page_address(table), 0); } #endif /* _ASM_POWERPC_PGALLOC_32_H */ -- cgit v1.2.3 From 2259b7a64d71f27311a19fd7a5bed47413d75985 Mon Sep 17 00:00:00 2001 From: Dave Stevenson Date: Mon, 25 Jun 2018 15:07:12 +0100 Subject: net: lan78xx: Allow for VLAN headers in timeout calcs The frame abort timeout being set by lan78xx_set_rx_max_frame_length didn't account for any VLAN headers, resulting in very low throughput if used with tagged VLANs. Use VLAN_ETH_HLEN instead of ETH_HLEN to correct for this. Signed-off-by: Dave Stevenson Signed-off-by: David S. Miller --- drivers/net/usb/lan78xx.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c index 8dff87ec6d99..1a1d3cc8e308 100644 --- a/drivers/net/usb/lan78xx.c +++ b/drivers/net/usb/lan78xx.c @@ -2298,7 +2298,7 @@ static int lan78xx_change_mtu(struct net_device *netdev, int new_mtu) if ((ll_mtu % dev->maxpacket) == 0) return -EDOM; - ret = lan78xx_set_rx_max_frame_length(dev, new_mtu + ETH_HLEN); + ret = lan78xx_set_rx_max_frame_length(dev, new_mtu + VLAN_ETH_HLEN); netdev->mtu = new_mtu; @@ -2587,7 +2587,8 @@ static int lan78xx_reset(struct lan78xx_net *dev) buf |= FCT_TX_CTL_EN_; ret = lan78xx_write_reg(dev, FCT_TX_CTL, buf); - ret = lan78xx_set_rx_max_frame_length(dev, dev->net->mtu + ETH_HLEN); + ret = lan78xx_set_rx_max_frame_length(dev, + dev->net->mtu + VLAN_ETH_HLEN); ret = lan78xx_read_reg(dev, MAC_RX, &buf); buf |= MAC_RX_RXEN_; -- cgit v1.2.3 From 4a27327b156e1e543c839a9358ba885564729ae7 Mon Sep 17 00:00:00 2001 From: Dave Stevenson Date: Mon, 25 Jun 2018 15:07:13 +0100 Subject: net: lan78xx: Add support for VLAN filtering. HW_VLAN_CTAG_FILTER was partially implemented, but not advertised to Linux. Complete the implementation of this. Signed-off-by: Dave Stevenson Signed-off-by: David S. Miller --- drivers/net/usb/lan78xx.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c index 1a1d3cc8e308..bd41a36924db 100644 --- a/drivers/net/usb/lan78xx.c +++ b/drivers/net/usb/lan78xx.c @@ -2363,7 +2363,7 @@ static int lan78xx_set_features(struct net_device *netdev, pdata->rfe_ctl &= ~(RFE_CTL_ICMP_COE_ | RFE_CTL_IGMP_COE_); } - if (features & NETIF_F_HW_VLAN_CTAG_RX) + if (features & NETIF_F_HW_VLAN_CTAG_FILTER) pdata->rfe_ctl |= RFE_CTL_VLAN_FILTER_; else pdata->rfe_ctl &= ~RFE_CTL_VLAN_FILTER_; @@ -2976,6 +2976,9 @@ static int lan78xx_bind(struct lan78xx_net *dev, struct usb_interface *intf) if (DEFAULT_TSO_CSUM_ENABLE) dev->net->features |= NETIF_F_TSO | NETIF_F_TSO6 | NETIF_F_SG; + if (DEFAULT_VLAN_FILTER_ENABLE) + dev->net->features |= NETIF_F_HW_VLAN_CTAG_FILTER; + dev->net->hw_features = dev->net->features; ret = lan78xx_setup_irq_domain(dev); -- cgit v1.2.3 From ec21ecf0aad27956dc64475e5acd78f3575df462 Mon Sep 17 00:00:00 2001 From: Dave Stevenson Date: Mon, 25 Jun 2018 15:07:14 +0100 Subject: net: lan78xx: Add support for VLAN tag stripping. The chip supports stripping the VLAN tag and reporting it in metadata. Complete the support for this. Signed-off-by: Dave Stevenson Signed-off-by: David S. Miller --- drivers/net/usb/lan78xx.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c index bd41a36924db..28da296f8cf7 100644 --- a/drivers/net/usb/lan78xx.c +++ b/drivers/net/usb/lan78xx.c @@ -64,6 +64,7 @@ #define DEFAULT_RX_CSUM_ENABLE (true) #define DEFAULT_TSO_CSUM_ENABLE (true) #define DEFAULT_VLAN_FILTER_ENABLE (true) +#define DEFAULT_VLAN_RX_OFFLOAD (true) #define TX_OVERHEAD (8) #define RXW_PADDING 2 @@ -2363,6 +2364,11 @@ static int lan78xx_set_features(struct net_device *netdev, pdata->rfe_ctl &= ~(RFE_CTL_ICMP_COE_ | RFE_CTL_IGMP_COE_); } + if (features & NETIF_F_HW_VLAN_CTAG_RX) + pdata->rfe_ctl |= RFE_CTL_VLAN_STRIP_; + else + pdata->rfe_ctl &= ~RFE_CTL_VLAN_STRIP_; + if (features & NETIF_F_HW_VLAN_CTAG_FILTER) pdata->rfe_ctl |= RFE_CTL_VLAN_FILTER_; else @@ -2976,6 +2982,9 @@ static int lan78xx_bind(struct lan78xx_net *dev, struct usb_interface *intf) if (DEFAULT_TSO_CSUM_ENABLE) dev->net->features |= NETIF_F_TSO | NETIF_F_TSO6 | NETIF_F_SG; + if (DEFAULT_VLAN_RX_OFFLOAD) + dev->net->features |= NETIF_F_HW_VLAN_CTAG_RX; + if (DEFAULT_VLAN_FILTER_ENABLE) dev->net->features |= NETIF_F_HW_VLAN_CTAG_FILTER; @@ -3052,6 +3061,16 @@ static void lan78xx_rx_csum_offload(struct lan78xx_net *dev, } } +static void lan78xx_rx_vlan_offload(struct lan78xx_net *dev, + struct sk_buff *skb, + u32 rx_cmd_a, u32 rx_cmd_b) +{ + if ((dev->net->features & NETIF_F_HW_VLAN_CTAG_RX) && + (rx_cmd_a & RX_CMD_A_FVTG_)) + __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), + (rx_cmd_b & 0xffff)); +} + static void lan78xx_skb_return(struct lan78xx_net *dev, struct sk_buff *skb) { int status; @@ -3116,6 +3135,8 @@ static int lan78xx_rx(struct lan78xx_net *dev, struct sk_buff *skb) if (skb->len == size) { lan78xx_rx_csum_offload(dev, skb, rx_cmd_a, rx_cmd_b); + lan78xx_rx_vlan_offload(dev, skb, + rx_cmd_a, rx_cmd_b); skb_trim(skb, skb->len - 4); /* remove fcs */ skb->truesize = size + sizeof(struct sk_buff); @@ -3134,6 +3155,7 @@ static int lan78xx_rx(struct lan78xx_net *dev, struct sk_buff *skb) skb_set_tail_pointer(skb2, size); lan78xx_rx_csum_offload(dev, skb2, rx_cmd_a, rx_cmd_b); + lan78xx_rx_vlan_offload(dev, skb2, rx_cmd_a, rx_cmd_b); skb_trim(skb2, skb2->len - 4); /* remove fcs */ skb2->truesize = size + sizeof(struct sk_buff); -- cgit v1.2.3 From 9343ac87f2a4e09bf6e27b5f31e72e9e3a82abff Mon Sep 17 00:00:00 2001 From: Dave Stevenson Date: Mon, 25 Jun 2018 15:07:15 +0100 Subject: net: lan78xx: Use s/w csum check on VLANs without tag stripping Observations of VLANs dropping packets due to invalid checksums when not offloading VLAN tag receive. With VLAN tag stripping enabled no issue is observed. Drop back to s/w checksums if VLAN offload is disabled. Signed-off-by: Dave Stevenson Signed-off-by: David S. Miller --- drivers/net/usb/lan78xx.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c index 28da296f8cf7..2e4130746c40 100644 --- a/drivers/net/usb/lan78xx.c +++ b/drivers/net/usb/lan78xx.c @@ -3052,8 +3052,13 @@ static void lan78xx_rx_csum_offload(struct lan78xx_net *dev, struct sk_buff *skb, u32 rx_cmd_a, u32 rx_cmd_b) { + /* HW Checksum offload appears to be flawed if used when not stripping + * VLAN headers. Drop back to S/W checksums under these conditions. + */ if (!(dev->net->features & NETIF_F_RXCSUM) || - unlikely(rx_cmd_a & RX_CMD_A_ICSM_)) { + unlikely(rx_cmd_a & RX_CMD_A_ICSM_) || + ((rx_cmd_a & RX_CMD_A_FVTG_) && + !(dev->net->features & NETIF_F_HW_VLAN_CTAG_RX))) { skb->ip_summed = CHECKSUM_NONE; } else { skb->csum = ntohs((u16)(rx_cmd_b >> RX_CMD_B_CSUM_SHIFT_)); -- cgit v1.2.3 From 1b6fe9798af8cb7d80fad5dd30ee1bcd1e0f51eb Mon Sep 17 00:00:00 2001 From: Adam Ford Date: Thu, 17 May 2018 20:20:52 -0500 Subject: ARM: davinci: board-da850-evm: fix WP pin polarity for MMC/SD When booting from MMC/SD in rw mode on DA850 EVM, the system crashes because the write protect pin should be active high and not active low. This patch fixes the polarity of the WP pin. Fixes: bdf0e8364fd3 ("ARM: davinci: da850-evm: use gpio descriptor for mmc pins") Signed-off-by: Adam Ford Signed-off-by: Sekhar Nori --- arch/arm/mach-davinci/board-da850-evm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index e22fb40e34bc..6d5beb11bd96 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -774,7 +774,7 @@ static struct gpiod_lookup_table mmc_gpios_table = { GPIO_LOOKUP("davinci_gpio.0", DA850_MMCSD_CD_PIN, "cd", GPIO_ACTIVE_LOW), GPIO_LOOKUP("davinci_gpio.0", DA850_MMCSD_WP_PIN, "wp", - GPIO_ACTIVE_LOW), + GPIO_ACTIVE_HIGH), }, }; -- cgit v1.2.3 From dffd22aed2aa1e804bccf19b30a421e89ee2ae61 Mon Sep 17 00:00:00 2001 From: Jann Horn Date: Wed, 20 Jun 2018 18:33:45 +0200 Subject: netfilter: nf_log: fix uninit read in nf_log_proc_dostring When proc_dostring() is called with a non-zero offset in strict mode, it doesn't just write to the ->data buffer, it also reads. Make sure it doesn't read uninitialized data. Fixes: c6ac37d8d884 ("netfilter: nf_log: fix error on write NONE to [...]") Signed-off-by: Jann Horn Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nf_log.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/net/netfilter/nf_log.c b/net/netfilter/nf_log.c index 426457047578..2c47f9ec3511 100644 --- a/net/netfilter/nf_log.c +++ b/net/netfilter/nf_log.c @@ -424,6 +424,10 @@ static int nf_log_proc_dostring(struct ctl_table *table, int write, if (write) { struct ctl_table tmp = *table; + /* proc_dostring() can append to existing strings, so we need to + * initialize it as an empty string. + */ + buf[0] = '\0'; tmp.data = buf; r = proc_dostring(&tmp, write, buffer, lenp, ppos); if (r) -- cgit v1.2.3 From ce00bf07cc95a57cd20b208e02b3c2604e532ae8 Mon Sep 17 00:00:00 2001 From: Jann Horn Date: Mon, 25 Jun 2018 17:22:00 +0200 Subject: netfilter: nf_log: don't hold nf_log_mutex during user access The old code would indefinitely block other users of nf_log_mutex if a userspace access in proc_dostring() blocked e.g. due to a userfaultfd region. Fix it by moving proc_dostring() out of the locked region. This is a followup to commit 266d07cb1c9a ("netfilter: nf_log: fix sleeping function called from invalid context"), which changed this code from using rcu_read_lock() to taking nf_log_mutex. Fixes: 266d07cb1c9a ("netfilter: nf_log: fix sleeping function calle[...]") Signed-off-by: Jann Horn Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nf_log.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/net/netfilter/nf_log.c b/net/netfilter/nf_log.c index 2c47f9ec3511..a61d6df6e5f6 100644 --- a/net/netfilter/nf_log.c +++ b/net/netfilter/nf_log.c @@ -446,14 +446,17 @@ static int nf_log_proc_dostring(struct ctl_table *table, int write, rcu_assign_pointer(net->nf.nf_loggers[tindex], logger); mutex_unlock(&nf_log_mutex); } else { + struct ctl_table tmp = *table; + + tmp.data = buf; mutex_lock(&nf_log_mutex); logger = nft_log_dereference(net->nf.nf_loggers[tindex]); if (!logger) - table->data = "NONE"; + strlcpy(buf, "NONE", sizeof(buf)); else - table->data = logger->name; - r = proc_dostring(table, write, buffer, lenp, ppos); + strlcpy(buf, logger->name, sizeof(buf)); mutex_unlock(&nf_log_mutex); + r = proc_dostring(&tmp, write, buffer, lenp, ppos); } return r; -- cgit v1.2.3 From b36e4523d4d56e2595e28f16f6ccf1cd6a9fc452 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Wed, 20 Jun 2018 23:32:26 +0200 Subject: netfilter: nf_conncount: fix garbage collection confirm race Yi-Hung Wei and Justin Pettit found a race in the garbage collection scheme used by nf_conncount. When doing list walk, we lookup the tuple in the conntrack table. If the lookup fails we remove this tuple from our list because the conntrack entry is gone. This is the common cause, but turns out its not the only one. The list entry could have been created just before by another cpu, i.e. the conntrack entry might not yet have been inserted into the global hash. The avoid this, we introduce a timestamp and the owning cpu. If the entry appears to be stale, evict only if: 1. The current cpu is the one that added the entry, or, 2. The timestamp is older than two jiffies The second constraint allows GC to be taken over by other cpu too (e.g. because a cpu was offlined or napi got moved to another cpu). We can't pretend the 'doubtful' entry wasn't in our list. Instead, when we don't find an entry indicate via IS_ERR that entry was removed ('did not exist' or withheld ('might-be-unconfirmed'). This most likely also fixes a xt_connlimit imbalance earlier reported by Dmitry Andrianov. Cc: Dmitry Andrianov Reported-by: Justin Pettit Reported-by: Yi-Hung Wei Signed-off-by: Florian Westphal Acked-by: Yi-Hung Wei Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nf_conncount.c | 52 +++++++++++++++++++++++++++++++++++++++----- 1 file changed, 47 insertions(+), 5 deletions(-) diff --git a/net/netfilter/nf_conncount.c b/net/netfilter/nf_conncount.c index d8383609fe28..510039862aa9 100644 --- a/net/netfilter/nf_conncount.c +++ b/net/netfilter/nf_conncount.c @@ -47,6 +47,8 @@ struct nf_conncount_tuple { struct hlist_node node; struct nf_conntrack_tuple tuple; struct nf_conntrack_zone zone; + int cpu; + u32 jiffies32; }; struct nf_conncount_rb { @@ -91,11 +93,42 @@ bool nf_conncount_add(struct hlist_head *head, return false; conn->tuple = *tuple; conn->zone = *zone; + conn->cpu = raw_smp_processor_id(); + conn->jiffies32 = (u32)jiffies; hlist_add_head(&conn->node, head); return true; } EXPORT_SYMBOL_GPL(nf_conncount_add); +static const struct nf_conntrack_tuple_hash * +find_or_evict(struct net *net, struct nf_conncount_tuple *conn) +{ + const struct nf_conntrack_tuple_hash *found; + unsigned long a, b; + int cpu = raw_smp_processor_id(); + __s32 age; + + found = nf_conntrack_find_get(net, &conn->zone, &conn->tuple); + if (found) + return found; + b = conn->jiffies32; + a = (u32)jiffies; + + /* conn might have been added just before by another cpu and + * might still be unconfirmed. In this case, nf_conntrack_find() + * returns no result. Thus only evict if this cpu added the + * stale entry or if the entry is older than two jiffies. + */ + age = a - b; + if (conn->cpu == cpu || age >= 2) { + hlist_del(&conn->node); + kmem_cache_free(conncount_conn_cachep, conn); + return ERR_PTR(-ENOENT); + } + + return ERR_PTR(-EAGAIN); +} + unsigned int nf_conncount_lookup(struct net *net, struct hlist_head *head, const struct nf_conntrack_tuple *tuple, const struct nf_conntrack_zone *zone, @@ -103,18 +136,27 @@ unsigned int nf_conncount_lookup(struct net *net, struct hlist_head *head, { const struct nf_conntrack_tuple_hash *found; struct nf_conncount_tuple *conn; - struct hlist_node *n; struct nf_conn *found_ct; + struct hlist_node *n; unsigned int length = 0; *addit = tuple ? true : false; /* check the saved connections */ hlist_for_each_entry_safe(conn, n, head, node) { - found = nf_conntrack_find_get(net, &conn->zone, &conn->tuple); - if (found == NULL) { - hlist_del(&conn->node); - kmem_cache_free(conncount_conn_cachep, conn); + found = find_or_evict(net, conn); + if (IS_ERR(found)) { + /* Not found, but might be about to be confirmed */ + if (PTR_ERR(found) == -EAGAIN) { + length++; + if (!tuple) + continue; + + if (nf_ct_tuple_equal(&conn->tuple, tuple) && + nf_ct_zone_id(&conn->zone, conn->zone.dir) == + nf_ct_zone_id(zone, zone->dir)) + *addit = false; + } continue; } -- cgit v1.2.3 From 8b8f53af1ed9df88a4c0fbfdf3db58f62060edf3 Mon Sep 17 00:00:00 2001 From: "Yan, Zheng" Date: Tue, 19 Jun 2018 18:20:34 +0800 Subject: ceph: fix dentry leak in splice_dentry() In any case, d_splice_alias() does not drop reference of original dentry. Signed-off-by: "Yan, Zheng" Reviewed-by: Jeff Layton Signed-off-by: Ilya Dryomov --- fs/ceph/inode.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/ceph/inode.c b/fs/ceph/inode.c index ee764ac352ab..a866be999216 100644 --- a/fs/ceph/inode.c +++ b/fs/ceph/inode.c @@ -1135,6 +1135,7 @@ static struct dentry *splice_dentry(struct dentry *dn, struct inode *in) if (IS_ERR(realdn)) { pr_err("splice_dentry error %ld %p inode %p ino %llx.%llx\n", PTR_ERR(realdn), dn, in, ceph_vinop(in)); + dput(dn); dn = realdn; /* note realdn contains the error */ goto out; } else if (realdn) { -- cgit v1.2.3 From 2e20ce4a66b798671c60198ea2547d5e090dd991 Mon Sep 17 00:00:00 2001 From: Nick Desaulniers Date: Tue, 26 Jun 2018 16:59:40 +0100 Subject: certs/blacklist: fix const confusion Fixes commit 2be04df5668d ("certs/blacklist_nohashes.c: fix const confusion in certs blacklist") Signed-off-by: Nick Desaulniers Signed-off-by: David Howells Signed-off-by: James Morris --- certs/blacklist.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/certs/blacklist.h b/certs/blacklist.h index 150d82da8e99..1efd6fa0dc60 100644 --- a/certs/blacklist.h +++ b/certs/blacklist.h @@ -1,3 +1,3 @@ #include -extern const char __initdata *const blacklist_hashes[]; +extern const char __initconst *const blacklist_hashes[]; -- cgit v1.2.3 From 3619dec5103dd999a777e3e4ea08c8f40a6ddc57 Mon Sep 17 00:00:00 2001 From: Eric Biggers Date: Tue, 26 Jun 2018 16:59:46 +0100 Subject: dh key: fix rounding up KDF output length Commit 383203eff718 ("dh key: get rid of stack allocated array") changed kdf_ctr() to assume that the length of key material to derive is a multiple of the digest size. The length was supposed to be rounded up accordingly. However, the round_up() macro was used which only gives the correct result on power-of-2 arguments, whereas not all hash algorithms have power-of-2 digest sizes. In some cases this resulted in a write past the end of the 'outbuf' buffer. Fix it by switching to roundup(), which works for non-power-of-2 inputs. Reported-by: syzbot+486f97f892efeb2075a3@syzkaller.appspotmail.com Reported-by: syzbot+29d17b7898b41ee120a5@syzkaller.appspotmail.com Reported-by: syzbot+8a608baf8751184ec727@syzkaller.appspotmail.com Reported-by: syzbot+d04e58bd384f1fe0b112@syzkaller.appspotmail.com Fixes: 383203eff718 ("dh key: get rid of stack allocated array") Signed-off-by: Eric Biggers Acked-by: Kees Cook Acked-by: Tycho Andersen Signed-off-by: James Morris --- security/keys/dh.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/security/keys/dh.c b/security/keys/dh.c index f7403821db7f..b203f7758f97 100644 --- a/security/keys/dh.c +++ b/security/keys/dh.c @@ -142,6 +142,8 @@ static void kdf_dealloc(struct kdf_sdesc *sdesc) * The src pointer is defined as Z || other info where Z is the shared secret * from DH and other info is an arbitrary string (see SP800-56A section * 5.8.1.2). + * + * 'dlen' must be a multiple of the digest size. */ static int kdf_ctr(struct kdf_sdesc *sdesc, const u8 *src, unsigned int slen, u8 *dst, unsigned int dlen, unsigned int zlen) @@ -205,8 +207,8 @@ static int keyctl_dh_compute_kdf(struct kdf_sdesc *sdesc, { uint8_t *outbuf = NULL; int ret; - size_t outbuf_len = round_up(buflen, - crypto_shash_digestsize(sdesc->shash.tfm)); + size_t outbuf_len = roundup(buflen, + crypto_shash_digestsize(sdesc->shash.tfm)); outbuf = kmalloc(outbuf_len, GFP_KERNEL); if (!outbuf) { -- cgit v1.2.3 From 4595299c5eaebbec0ca5822214ad1925a10b3876 Mon Sep 17 00:00:00 2001 From: Thor Thayer Date: Fri, 22 Jun 2018 13:35:38 -0500 Subject: arm64: dts: stratix10: Fix SPI nodes for Stratix10 Remove the unused bus-num node and change num-chipselect to num-cs to match SPI bindings. Cc: stable@vger.kernel.org Fixes: 78cd6a9d8e154 ("arm64: dts: Add base stratix 10 dtsi") Signed-off-by: Thor Thayer Signed-off-by: Dinh Nguyen Signed-off-by: Olof Johansson --- arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi index e6b059378dc0..67dac595dc72 100644 --- a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi @@ -309,8 +309,7 @@ interrupts = <0 99 4>; resets = <&rst SPIM0_RESET>; reg-io-width = <4>; - num-chipselect = <4>; - bus-num = <0>; + num-cs = <4>; status = "disabled"; }; @@ -322,8 +321,7 @@ interrupts = <0 100 4>; resets = <&rst SPIM1_RESET>; reg-io-width = <4>; - num-chipselect = <4>; - bus-num = <0>; + num-cs = <4>; status = "disabled"; }; -- cgit v1.2.3 From 975ba94c2c3aca4d9f1ae26f3916d7787495ce86 Mon Sep 17 00:00:00 2001 From: Thor Thayer Date: Fri, 22 Jun 2018 13:37:34 -0500 Subject: ARM: dts: Fix SPI node for Arria10 Remove the unused bus-num node and change num-chipselect to num-cs to match SPI bindings. Cc: stable@vger.kernel.org Fixes: f2d6f8f817814 ("ARM: dts: socfpga: Add SPI Master1 for Arria10 SR chip") Signed-off-by: Thor Thayer Signed-off-by: Dinh Nguyen Signed-off-by: Olof Johansson --- arch/arm/boot/dts/socfpga_arria10.dtsi | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/socfpga_arria10.dtsi b/arch/arm/boot/dts/socfpga_arria10.dtsi index d8b1aa309f76..791ca15c799e 100644 --- a/arch/arm/boot/dts/socfpga_arria10.dtsi +++ b/arch/arm/boot/dts/socfpga_arria10.dtsi @@ -593,8 +593,7 @@ #size-cells = <0>; reg = <0xffda5000 0x100>; interrupts = <0 102 4>; - num-chipselect = <4>; - bus-num = <0>; + num-cs = <4>; /*32bit_access;*/ tx-dma-channel = <&pdma 16>; rx-dma-channel = <&pdma 17>; -- cgit v1.2.3 From 15bfd21fbc5d35834b9ea383dc458a1f0c9e3434 Mon Sep 17 00:00:00 2001 From: Keith Busch Date: Tue, 26 Jun 2018 09:14:58 -0600 Subject: block: Fix transfer when chunk sectors exceeds max A device may have boundary restrictions where the number of sectors between boundaries exceeds its max transfer size. In this case, we need to cap the max size to the smaller of the two limits. Reported-by: Jitendra Bhivare Tested-by: Jitendra Bhivare Cc: Reviewed-by: Martin K. Petersen Signed-off-by: Keith Busch Signed-off-by: Jens Axboe --- include/linux/blkdev.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 9154570edf29..79226ca8f80f 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -1119,8 +1119,8 @@ static inline unsigned int blk_max_size_offset(struct request_queue *q, if (!q->limits.chunk_sectors) return q->limits.max_sectors; - return q->limits.chunk_sectors - - (offset & (q->limits.chunk_sectors - 1)); + return min(q->limits.max_sectors, (unsigned int)(q->limits.chunk_sectors - + (offset & (q->limits.chunk_sectors - 1)))); } static inline unsigned int blk_rq_get_max_sectors(struct request *rq, -- cgit v1.2.3 From 68bb22e9d561ad7c20274eee92058048ac689b98 Mon Sep 17 00:00:00 2001 From: Alan Douglas Date: Fri, 22 Jun 2018 17:17:17 +0100 Subject: PCI: Initialize endpoint library before controllers The endpoint library must be initialized before its users, which are in drivers/pci/controllers. The endpoint initialization currently depends on link order. This corrects a kernel crash when loading the Cadence EP driver, since it calls devm_pci_epc_create() and this is only valid once the endpoint library has been initialized. Fixes: 6e0832fa432e ("PCI: Collect all native drivers under drivers/pci/controller/") Signed-off-by: Alan Douglas Signed-off-by: Bjorn Helgaas --- drivers/pci/Makefile | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile index 535201984b8b..1b2cfe51e8d7 100644 --- a/drivers/pci/Makefile +++ b/drivers/pci/Makefile @@ -28,10 +28,10 @@ obj-$(CONFIG_PCI_PF_STUB) += pci-pf-stub.o obj-$(CONFIG_PCI_ECAM) += ecam.o obj-$(CONFIG_XEN_PCIDEV_FRONTEND) += xen-pcifront.o -obj-y += controller/ -obj-y += switch/ - # Endpoint library must be initialized before its users obj-$(CONFIG_PCI_ENDPOINT) += endpoint/ +obj-y += controller/ +obj-y += switch/ + ccflags-$(CONFIG_PCI_DEBUG) := -DDEBUG -- cgit v1.2.3 From 925d31668d5b6c9849c50167f31f9b5cf9eec892 Mon Sep 17 00:00:00 2001 From: Lorenzo Pieralisi Date: Tue, 19 Jun 2018 12:21:05 +0100 Subject: PCI: controller: Move PCI_DOMAINS selection to arch Kconfig Commit 51bc085d6454 ("PCI: Improve host drivers compile test coverage") added configuration options to allow PCI host controller drivers to be compile tested on all architectures. Some host controller drivers (eg PCIE_ALTERA) config entries select the PCI_DOMAINS config option to enable PCI domains management in the kernel. Now that host controller drivers can be compiled on all architectures, this triggers build regressions on arches that do not implement the PCI_DOMAINS required API (ie pci_domain_nr()): drivers/ata/pata_ali.c: In function 'ali_init_chipset': drivers/ata/pata_ali.c:469:38: error: implicit declaration of function 'pci_domain_nr'; did you mean 'pci_iomap_wc'? Furthemore, some software configurations (ie Jailhouse) require a PCI_DOMAINS enabled kernel to configure multiple host controllers without having an explicit dependency on the ARM platform on which they run. Make PCI_DOMAINS a visible configuration option on ARM so that software configurations that need it can manually select it and move the PCI_DOMAINS selection from PCI controllers configuration file to ARM sub-arch config entries that currently require it, fixing the issue. Fixes: 51bc085d6454 ("PCI: Improve host drivers compile test coverage") Link: https://lkml.kernel.org/r/20180612170229.GA10141@roeck-us.net Reported-by: Guenter Roeck Signed-off-by: Lorenzo Pieralisi Signed-off-by: Bjorn Helgaas Acked-by: Jan Kiszka Acked-by: Ley Foon Tan Acked-by: Rob Herring Cc: Scott Branden Cc: Will Deacon Cc: Russell King Cc: Guenter Roeck --- arch/arm/Kconfig | 8 +++++++- arch/arm/mach-bcm/Kconfig | 1 + arch/arm/mach-socfpga/Kconfig | 1 + drivers/pci/controller/Kconfig | 3 --- 4 files changed, 9 insertions(+), 4 deletions(-) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 54eeb8d00bc6..843edfd000be 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1245,8 +1245,14 @@ config PCI VESA. If you have PCI, say Y, otherwise N. config PCI_DOMAINS - bool + bool "Support for multiple PCI domains" depends on PCI + help + Enable PCI domains kernel management. Say Y if your machine + has a PCI bus hierarchy that requires more than one PCI + domain (aka segment) to be correctly managed. Say N otherwise. + + If you don't know what to do here, say N. config PCI_DOMAINS_GENERIC def_bool PCI_DOMAINS diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig index c46a728df44e..25aac6ee2ab1 100644 --- a/arch/arm/mach-bcm/Kconfig +++ b/arch/arm/mach-bcm/Kconfig @@ -20,6 +20,7 @@ config ARCH_BCM_IPROC select GPIOLIB select ARM_AMBA select PINCTRL + select PCI_DOMAINS if PCI help This enables support for systems based on Broadcom IPROC architected SoCs. The IPROC complex contains one or more ARM CPUs along with common diff --git a/arch/arm/mach-socfpga/Kconfig b/arch/arm/mach-socfpga/Kconfig index d0f62eacf59d..4adb901dd5eb 100644 --- a/arch/arm/mach-socfpga/Kconfig +++ b/arch/arm/mach-socfpga/Kconfig @@ -10,6 +10,7 @@ menuconfig ARCH_SOCFPGA select HAVE_ARM_SCU select HAVE_ARM_TWD if SMP select MFD_SYSCON + select PCI_DOMAINS if PCI if ARCH_SOCFPGA config SOCFPGA_SUSPEND diff --git a/drivers/pci/controller/Kconfig b/drivers/pci/controller/Kconfig index 18fa09b3ac8f..cc9fa02d32a0 100644 --- a/drivers/pci/controller/Kconfig +++ b/drivers/pci/controller/Kconfig @@ -96,7 +96,6 @@ config PCI_HOST_GENERIC depends on OF select PCI_HOST_COMMON select IRQ_DOMAIN - select PCI_DOMAINS help Say Y here if you want to support a simple generic PCI host controller, such as the one emulated by kvmtool. @@ -138,7 +137,6 @@ config PCI_VERSATILE config PCIE_IPROC tristate - select PCI_DOMAINS help This enables the iProc PCIe core controller support for Broadcom's iProc family of SoCs. An appropriate bus interface driver needs @@ -176,7 +174,6 @@ config PCIE_IPROC_MSI config PCIE_ALTERA bool "Altera PCIe controller" depends on ARM || NIOS2 || COMPILE_TEST - select PCI_DOMAINS help Say Y here if you want to enable PCIe controller support on Altera FPGA. -- cgit v1.2.3 From 8ffd569aaa818f2624ca821d9a246342fa8b8c50 Mon Sep 17 00:00:00 2001 From: Or Gerlitz Date: Mon, 4 Jun 2018 19:46:53 +0300 Subject: net/mlx5e: Don't attempt to dereference the ppriv struct if not being eswitch manager The check for cpu hit statistics was not returning immediate false for any non vport rep netdev and hence we crashed (say on mlx5 probed VFs) if user-space tool was calling into any possible netdev in the system. Fix that by doing a proper check before dereferencing. Fixes: 1d447a39142e ('net/mlx5e: Extendable vport representor netdev private data') Signed-off-by: Or Gerlitz Reported-by: Eli Cohen Reviewed-by: Eli Cohen Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en_rep.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c index 57987f6546e8..378ad74518ec 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c @@ -837,8 +837,12 @@ bool mlx5e_is_uplink_rep(struct mlx5e_priv *priv) static bool mlx5e_is_vf_vport_rep(struct mlx5e_priv *priv) { struct mlx5e_rep_priv *rpriv = priv->ppriv; - struct mlx5_eswitch_rep *rep = rpriv->rep; + struct mlx5_eswitch_rep *rep; + if (!MLX5_CAP_GEN(priv->mdev, eswitch_flow_table)) + return false; + + rep = rpriv->rep; if (rep && rep->vport != FDB_UPLINK_VPORT) return true; -- cgit v1.2.3 From 0efc8562491b7d36f6bbc4fbc8f3348cb6641e9c Mon Sep 17 00:00:00 2001 From: Or Gerlitz Date: Thu, 31 May 2018 11:16:18 +0300 Subject: net/mlx5: E-Switch, Avoid setup attempt if not being e-switch manager In smartnic env, the host (PF) driver might not be an e-switch manager, hence the FW will err on driver attempts to deal with setting/unsetting the eswitch and as a result the overall setup of sriov will fail. Fix that by avoiding the operation if e-switch management is not allowed for this driver instance. While here, move to use the correct name for the esw manager capability name. Fixes: 81848731ff40 ('net/mlx5: E-Switch, Add SR-IOV (FDB) support') Signed-off-by: Or Gerlitz Reported-by: Guy Kushnir Reviewed-by: Eli Cohen Tested-by: Eli Cohen Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en_rep.c | 2 +- drivers/net/ethernet/mellanox/mlx5/core/eswitch.c | 2 +- drivers/net/ethernet/mellanox/mlx5/core/fs_core.c | 3 ++- drivers/net/ethernet/mellanox/mlx5/core/fw.c | 5 +++-- drivers/net/ethernet/mellanox/mlx5/core/sriov.c | 7 ++++++- include/linux/mlx5/eswitch.h | 2 ++ include/linux/mlx5/mlx5_ifc.h | 2 +- 7 files changed, 16 insertions(+), 7 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c index 378ad74518ec..60236f73373c 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c @@ -839,7 +839,7 @@ static bool mlx5e_is_vf_vport_rep(struct mlx5e_priv *priv) struct mlx5e_rep_priv *rpriv = priv->ppriv; struct mlx5_eswitch_rep *rep; - if (!MLX5_CAP_GEN(priv->mdev, eswitch_flow_table)) + if (!MLX5_ESWITCH_MANAGER(priv->mdev)) return false; rep = rpriv->rep; diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c index f63dfbcd29fe..103fd6a0cc65 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c @@ -1604,7 +1604,7 @@ int mlx5_eswitch_enable_sriov(struct mlx5_eswitch *esw, int nvfs, int mode) if (!ESW_ALLOWED(esw)) return 0; - if (!MLX5_CAP_GEN(esw->dev, eswitch_flow_table) || + if (!MLX5_ESWITCH_MANAGER(esw->dev) || !MLX5_CAP_ESW_FLOWTABLE_FDB(esw->dev, ft_support)) { esw_warn(esw->dev, "E-Switch FDB is not supported, aborting ...\n"); return -EOPNOTSUPP; diff --git a/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c b/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c index 49a75d31185e..f1a86cea86a0 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c @@ -32,6 +32,7 @@ #include #include +#include #include "mlx5_core.h" #include "fs_core.h" @@ -2652,7 +2653,7 @@ int mlx5_init_fs(struct mlx5_core_dev *dev) goto err; } - if (MLX5_CAP_GEN(dev, eswitch_flow_table)) { + if (MLX5_ESWITCH_MANAGER(dev)) { if (MLX5_CAP_ESW_FLOWTABLE_FDB(dev, ft_support)) { err = init_fdb_root_ns(steering); if (err) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/fw.c b/drivers/net/ethernet/mellanox/mlx5/core/fw.c index afd9f4fa22f4..41ad24f0de2c 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/fw.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/fw.c @@ -32,6 +32,7 @@ #include #include +#include #include #include "mlx5_core.h" #include "../../mlxfw/mlxfw.h" @@ -159,13 +160,13 @@ int mlx5_query_hca_caps(struct mlx5_core_dev *dev) } if (MLX5_CAP_GEN(dev, vport_group_manager) && - MLX5_CAP_GEN(dev, eswitch_flow_table)) { + MLX5_ESWITCH_MANAGER(dev)) { err = mlx5_core_get_caps(dev, MLX5_CAP_ESWITCH_FLOW_TABLE); if (err) return err; } - if (MLX5_CAP_GEN(dev, eswitch_flow_table)) { + if (MLX5_ESWITCH_MANAGER(dev)) { err = mlx5_core_get_caps(dev, MLX5_CAP_ESWITCH); if (err) return err; diff --git a/drivers/net/ethernet/mellanox/mlx5/core/sriov.c b/drivers/net/ethernet/mellanox/mlx5/core/sriov.c index 2a8b529ce6dd..a0674962f02c 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/sriov.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/sriov.c @@ -88,6 +88,9 @@ static int mlx5_device_enable_sriov(struct mlx5_core_dev *dev, int num_vfs) return -EBUSY; } + if (!MLX5_ESWITCH_MANAGER(dev)) + goto enable_vfs_hca; + err = mlx5_eswitch_enable_sriov(dev->priv.eswitch, num_vfs, SRIOV_LEGACY); if (err) { mlx5_core_warn(dev, @@ -95,6 +98,7 @@ static int mlx5_device_enable_sriov(struct mlx5_core_dev *dev, int num_vfs) return err; } +enable_vfs_hca: for (vf = 0; vf < num_vfs; vf++) { err = mlx5_core_enable_hca(dev, vf + 1); if (err) { @@ -140,7 +144,8 @@ static void mlx5_device_disable_sriov(struct mlx5_core_dev *dev) } out: - mlx5_eswitch_disable_sriov(dev->priv.eswitch); + if (MLX5_ESWITCH_MANAGER(dev)) + mlx5_eswitch_disable_sriov(dev->priv.eswitch); if (mlx5_wait_for_vf_pages(dev)) mlx5_core_warn(dev, "timeout reclaiming VFs pages\n"); diff --git a/include/linux/mlx5/eswitch.h b/include/linux/mlx5/eswitch.h index d3c9db492b30..fab5121ffb8f 100644 --- a/include/linux/mlx5/eswitch.h +++ b/include/linux/mlx5/eswitch.h @@ -8,6 +8,8 @@ #include +#define MLX5_ESWITCH_MANAGER(mdev) MLX5_CAP_GEN(mdev, eswitch_manager) + enum { SRIOV_NONE, SRIOV_LEGACY, diff --git a/include/linux/mlx5/mlx5_ifc.h b/include/linux/mlx5/mlx5_ifc.h index 27134c4fcb76..ac281f5ec9b8 100644 --- a/include/linux/mlx5/mlx5_ifc.h +++ b/include/linux/mlx5/mlx5_ifc.h @@ -922,7 +922,7 @@ struct mlx5_ifc_cmd_hca_cap_bits { u8 vnic_env_queue_counters[0x1]; u8 ets[0x1]; u8 nic_flow_table[0x1]; - u8 eswitch_flow_table[0x1]; + u8 eswitch_manager[0x1]; u8 device_memory[0x1]; u8 mcam_reg[0x1]; u8 pcam_reg[0x1]; -- cgit v1.2.3 From 733d3e5497070d05971352ca5087bac83c197c3d Mon Sep 17 00:00:00 2001 From: Or Gerlitz Date: Thu, 31 May 2018 11:32:56 +0300 Subject: net/mlx5e: Avoid dealing with vport representors if not being e-switch manager In smartnic env, the host (PF) driver might not be an e-switch manager, hence the switchdev mode representors are running on the embedded cpu (EC) and not at the host. As such, we should avoid dealing with vport representors if not being esw manager. While here, make sure to disallow eswitch switchdev related setups through devlink if we are not esw managers. Fixes: cb67b832921c ('net/mlx5e: Introduce SRIOV VF representors') Signed-off-by: Or Gerlitz Reviewed-by: Eli Cohen Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 12 ++++++------ drivers/net/ethernet/mellanox/mlx5/core/en_rep.c | 2 +- drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c | 4 ++-- 3 files changed, 9 insertions(+), 9 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c index 56c1b6f5593e..dae4156a710d 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c @@ -2846,7 +2846,7 @@ void mlx5e_activate_priv_channels(struct mlx5e_priv *priv) mlx5e_activate_channels(&priv->channels); netif_tx_start_all_queues(priv->netdev); - if (MLX5_VPORT_MANAGER(priv->mdev)) + if (MLX5_ESWITCH_MANAGER(priv->mdev)) mlx5e_add_sqs_fwd_rules(priv); mlx5e_wait_channels_min_rx_wqes(&priv->channels); @@ -2857,7 +2857,7 @@ void mlx5e_deactivate_priv_channels(struct mlx5e_priv *priv) { mlx5e_redirect_rqts_to_drop(priv); - if (MLX5_VPORT_MANAGER(priv->mdev)) + if (MLX5_ESWITCH_MANAGER(priv->mdev)) mlx5e_remove_sqs_fwd_rules(priv); /* FIXME: This is a W/A only for tx timeout watch dog false alarm when @@ -4597,7 +4597,7 @@ static void mlx5e_build_nic_netdev(struct net_device *netdev) mlx5e_set_netdev_dev_addr(netdev); #if IS_ENABLED(CONFIG_MLX5_ESWITCH) - if (MLX5_VPORT_MANAGER(mdev)) + if (MLX5_ESWITCH_MANAGER(mdev)) netdev->switchdev_ops = &mlx5e_switchdev_ops; #endif @@ -4753,7 +4753,7 @@ static void mlx5e_nic_enable(struct mlx5e_priv *priv) mlx5e_enable_async_events(priv); - if (MLX5_VPORT_MANAGER(priv->mdev)) + if (MLX5_ESWITCH_MANAGER(priv->mdev)) mlx5e_register_vport_reps(priv); if (netdev->reg_state != NETREG_REGISTERED) @@ -4788,7 +4788,7 @@ static void mlx5e_nic_disable(struct mlx5e_priv *priv) queue_work(priv->wq, &priv->set_rx_mode_work); - if (MLX5_VPORT_MANAGER(priv->mdev)) + if (MLX5_ESWITCH_MANAGER(priv->mdev)) mlx5e_unregister_vport_reps(priv); mlx5e_disable_async_events(priv); @@ -4972,7 +4972,7 @@ static void *mlx5e_add(struct mlx5_core_dev *mdev) return NULL; #ifdef CONFIG_MLX5_ESWITCH - if (MLX5_VPORT_MANAGER(mdev)) { + if (MLX5_ESWITCH_MANAGER(mdev)) { rpriv = mlx5e_alloc_nic_rep_priv(mdev); if (!rpriv) { mlx5_core_warn(mdev, "Failed to alloc NIC rep priv data\n"); diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c index 60236f73373c..2b8040a3cdbd 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c @@ -823,7 +823,7 @@ bool mlx5e_is_uplink_rep(struct mlx5e_priv *priv) struct mlx5e_rep_priv *rpriv = priv->ppriv; struct mlx5_eswitch_rep *rep; - if (!MLX5_CAP_GEN(priv->mdev, vport_group_manager)) + if (!MLX5_ESWITCH_MANAGER(priv->mdev)) return false; rep = rpriv->rep; diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c index cecd201f0b73..91f1209886ff 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c @@ -1079,8 +1079,8 @@ static int mlx5_devlink_eswitch_check(struct devlink *devlink) if (MLX5_CAP_GEN(dev, port_type) != MLX5_CAP_PORT_TYPE_ETH) return -EOPNOTSUPP; - if (!MLX5_CAP_GEN(dev, vport_group_manager)) - return -EOPNOTSUPP; + if(!MLX5_ESWITCH_MANAGER(dev)) + return -EPERM; if (dev->priv.eswitch->mode == SRIOV_NONE) return -EOPNOTSUPP; -- cgit v1.2.3 From aff2252a2ad3844ca47bf2f18af071101baace40 Mon Sep 17 00:00:00 2001 From: Or Gerlitz Date: Thu, 31 May 2018 11:40:17 +0300 Subject: IB/mlx5: Avoid dealing with vport representors if not being e-switch manager In smartnic env, the host (PF) driver might not be an e-switch manager, hence the switchdev mode representors are running on the embedded cpu (EC) and not at the host. As such, we should avoid dealing with vport representors if not being esw manager. Fixes: b5ca15ad7e61 ('IB/mlx5: Add proper representors support') Signed-off-by: Or Gerlitz Reviewed-by: Eli Cohen Signed-off-by: Saeed Mahameed --- drivers/infiniband/hw/mlx5/main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/infiniband/hw/mlx5/main.c b/drivers/infiniband/hw/mlx5/main.c index e52dd21519b4..634be96dcb86 100644 --- a/drivers/infiniband/hw/mlx5/main.c +++ b/drivers/infiniband/hw/mlx5/main.c @@ -6107,7 +6107,7 @@ static void *mlx5_ib_add(struct mlx5_core_dev *mdev) dev->num_ports = max(MLX5_CAP_GEN(mdev, num_ports), MLX5_CAP_GEN(mdev, num_vhca_ports)); - if (MLX5_VPORT_MANAGER(mdev) && + if (MLX5_ESWITCH_MANAGER(mdev) && mlx5_ib_eswitch_mode(mdev->priv.eswitch) == SRIOV_OFFLOADS) { dev->rep = mlx5_ib_vport_rep(mdev->priv.eswitch, 0); -- cgit v1.2.3 From a8d70a054a718b63058b3d3ac58b6181815e4289 Mon Sep 17 00:00:00 2001 From: Eli Cohen Date: Thu, 31 May 2018 12:24:48 +0300 Subject: net/mlx5: E-Switch, Disallow vlan/spoofcheck setup if not being esw manager In smartnic env, if the host (PF) driver is not an e-switch manager, we are not allowed to apply eswitch ports setups such as vlan (VST), spoof-checks, min/max rate or state. Make sure we are eswitch manager when coming to issue these callbacks and err otherwise. Also fix the definition of ESW_ALLOWED to rely on eswitch_manager capability and on the vport_group_manger. Operations on the VF nic vport context, such as setting a mac or reading the vport counters are allowed to the PF in this scheme. The modify nic vport guid code was modified to omit checking the nic_vport_node_guid_modify eswitch capability. The reason for doing so is that modifying node guid requires vport group manager capability, and there's no need to check further capabilities. 1. set_vf_vlan - disallowed 2. set_vf_spoofchk - disallowed 3. set_vf_mac - allowed 4. get_vf_config - allowed 5. set_vf_trust - disallowed 6. set_vf_rate - disallowed 7. get_vf_stat - allowed 8. set_vf_link_state - disallowed Fixes: f942380c1239 ('net/mlx5: E-Switch, Vport ingress/egress ACLs rules for spoofchk') Signed-off-by: Eli Cohen Reviewed-by: Or Gerlitz Tested-by: Or Gerlitz --- drivers/net/ethernet/mellanox/mlx5/core/eswitch.c | 12 +++++------- drivers/net/ethernet/mellanox/mlx5/core/vport.c | 2 -- 2 files changed, 5 insertions(+), 9 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c index 103fd6a0cc65..b79d74860a30 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c @@ -1594,17 +1594,15 @@ static void esw_disable_vport(struct mlx5_eswitch *esw, int vport_num) } /* Public E-Switch API */ -#define ESW_ALLOWED(esw) ((esw) && MLX5_VPORT_MANAGER((esw)->dev)) +#define ESW_ALLOWED(esw) ((esw) && MLX5_ESWITCH_MANAGER((esw)->dev)) + int mlx5_eswitch_enable_sriov(struct mlx5_eswitch *esw, int nvfs, int mode) { int err; int i, enabled_events; - if (!ESW_ALLOWED(esw)) - return 0; - - if (!MLX5_ESWITCH_MANAGER(esw->dev) || + if (!ESW_ALLOWED(esw) || !MLX5_CAP_ESW_FLOWTABLE_FDB(esw->dev, ft_support)) { esw_warn(esw->dev, "E-Switch FDB is not supported, aborting ...\n"); return -EOPNOTSUPP; @@ -1806,7 +1804,7 @@ int mlx5_eswitch_set_vport_mac(struct mlx5_eswitch *esw, u64 node_guid; int err = 0; - if (!ESW_ALLOWED(esw)) + if (!MLX5_CAP_GEN(esw->dev, vport_group_manager)) return -EPERM; if (!LEGAL_VPORT(esw, vport) || is_multicast_ether_addr(mac)) return -EINVAL; @@ -1883,7 +1881,7 @@ int mlx5_eswitch_get_vport_config(struct mlx5_eswitch *esw, { struct mlx5_vport *evport; - if (!ESW_ALLOWED(esw)) + if (!MLX5_CAP_GEN(esw->dev, vport_group_manager)) return -EPERM; if (!LEGAL_VPORT(esw, vport)) return -EINVAL; diff --git a/drivers/net/ethernet/mellanox/mlx5/core/vport.c b/drivers/net/ethernet/mellanox/mlx5/core/vport.c index 719cecb182c6..7eecd5b07bb1 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/vport.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/vport.c @@ -549,8 +549,6 @@ int mlx5_modify_nic_vport_node_guid(struct mlx5_core_dev *mdev, return -EINVAL; if (!MLX5_CAP_GEN(mdev, vport_group_manager)) return -EACCES; - if (!MLX5_CAP_ESW(mdev, nic_vport_node_guid_modify)) - return -EOPNOTSUPP; in = kvzalloc(inlen, GFP_KERNEL); if (!in) -- cgit v1.2.3 From f811980444ec59ad62f9e041adbb576a821132c7 Mon Sep 17 00:00:00 2001 From: Eli Cohen Date: Wed, 13 Jun 2018 10:27:34 +0300 Subject: net/mlx5: Fix required capability for manipulating MPFS Manipulating of the MPFS requires eswitch manager capabilities. Fixes: eeb66cdb6826 ('net/mlx5: Separate between E-Switch and MPFS') Signed-off-by: Eli Cohen Reviewed-by: Or Gerlitz Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/lib/mpfs.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/lib/mpfs.c b/drivers/net/ethernet/mellanox/mlx5/core/lib/mpfs.c index 7cb67122e8b5..98359559c77e 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/lib/mpfs.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/lib/mpfs.c @@ -33,6 +33,7 @@ #include #include #include +#include #include "mlx5_core.h" #include "lib/mpfs.h" @@ -98,7 +99,7 @@ int mlx5_mpfs_init(struct mlx5_core_dev *dev) int l2table_size = 1 << MLX5_CAP_GEN(dev, log_max_l2_table); struct mlx5_mpfs *mpfs; - if (!MLX5_VPORT_MANAGER(dev)) + if (!MLX5_ESWITCH_MANAGER(dev)) return 0; mpfs = kzalloc(sizeof(*mpfs), GFP_KERNEL); @@ -122,7 +123,7 @@ void mlx5_mpfs_cleanup(struct mlx5_core_dev *dev) { struct mlx5_mpfs *mpfs = dev->priv.mpfs; - if (!MLX5_VPORT_MANAGER(dev)) + if (!MLX5_ESWITCH_MANAGER(dev)) return; WARN_ON(!hlist_empty(mpfs->hash)); @@ -137,7 +138,7 @@ int mlx5_mpfs_add_mac(struct mlx5_core_dev *dev, u8 *mac) u32 index; int err; - if (!MLX5_VPORT_MANAGER(dev)) + if (!MLX5_ESWITCH_MANAGER(dev)) return 0; mutex_lock(&mpfs->lock); @@ -179,7 +180,7 @@ int mlx5_mpfs_del_mac(struct mlx5_core_dev *dev, u8 *mac) int err = 0; u32 index; - if (!MLX5_VPORT_MANAGER(dev)) + if (!MLX5_ESWITCH_MANAGER(dev)) return 0; mutex_lock(&mpfs->lock); -- cgit v1.2.3 From d14fcb8d877caf1b8d6bd65d444bf62b21f2070c Mon Sep 17 00:00:00 2001 From: Shay Agroskin Date: Tue, 22 May 2018 14:14:02 +0300 Subject: net/mlx5: Fix wrong size allocation for QoS ETC TC regitster The driver allocates wrong size (due to wrong struct name) when issuing a query/set request to NIC's register. Fixes: d8880795dabf ("net/mlx5e: Implement DCBNL IEEE max rate") Signed-off-by: Shay Agroskin Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/port.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/port.c b/drivers/net/ethernet/mellanox/mlx5/core/port.c index fa9d0760dd36..31a9cbd85689 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/port.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/port.c @@ -701,7 +701,7 @@ EXPORT_SYMBOL_GPL(mlx5_query_port_prio_tc); static int mlx5_set_port_qetcr_reg(struct mlx5_core_dev *mdev, u32 *in, int inlen) { - u32 out[MLX5_ST_SZ_DW(qtct_reg)]; + u32 out[MLX5_ST_SZ_DW(qetc_reg)]; if (!MLX5_CAP_GEN(mdev, ets)) return -EOPNOTSUPP; @@ -713,7 +713,7 @@ static int mlx5_set_port_qetcr_reg(struct mlx5_core_dev *mdev, u32 *in, static int mlx5_query_port_qetcr_reg(struct mlx5_core_dev *mdev, u32 *out, int outlen) { - u32 in[MLX5_ST_SZ_DW(qtct_reg)]; + u32 in[MLX5_ST_SZ_DW(qetc_reg)]; if (!MLX5_CAP_GEN(mdev, ets)) return -EOPNOTSUPP; -- cgit v1.2.3 From 603b7bcff824740500ddfa001d7a7168b0b38542 Mon Sep 17 00:00:00 2001 From: Alex Vesker Date: Fri, 25 May 2018 20:25:59 +0300 Subject: net/mlx5: Fix incorrect raw command length parsing The NULL character was not set correctly for the string containing the command length, this caused failures reading the output of the command due to a random length. The fix is to initialize the output length string. Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Signed-off-by: Alex Vesker Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/cmd.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c index 487388aed98f..2db5fe571594 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c @@ -1276,7 +1276,7 @@ static ssize_t outlen_write(struct file *filp, const char __user *buf, { struct mlx5_core_dev *dev = filp->private_data; struct mlx5_cmd_debug *dbg = &dev->cmd.dbg; - char outlen_str[8]; + char outlen_str[8] = {0}; int outlen; void *ptr; int err; @@ -1291,8 +1291,6 @@ static ssize_t outlen_write(struct file *filp, const char __user *buf, if (copy_from_user(outlen_str, buf, count)) return -EFAULT; - outlen_str[7] = 0; - err = sscanf(outlen_str, "%d", &outlen); if (err < 0) return err; -- cgit v1.2.3 From d412c31dae053bf30a1bc15582a9990df297a660 Mon Sep 17 00:00:00 2001 From: Alex Vesker Date: Tue, 12 Jun 2018 16:14:31 +0300 Subject: net/mlx5: Fix command interface race in polling mode The command interface can work in two modes: Events and Polling. In the general case, each time we invoke a command, a work is queued to handle it. When working in events, the interrupt handler completes the command execution. On the other hand, when working in polling mode, the work itself completes it. Due to a bug in the work handler, a command could have been completed by the interrupt handler, while the work handler hasn't finished yet, causing the it to complete once again if the command interface mode was changed from Events to polling after the interrupt handler was called. mlx5_unload_one() mlx5_stop_eqs() // Destroy the EQ before cmd EQ ...cmd_work_handler() write_doorbell() --> EVENT_TYPE_CMD mlx5_cmd_comp_handler() // First free free_ent(cmd, ent->idx) complete(&ent->done) <-- mlx5_stop_eqs //cmd was complete // move to polling before destroying the last cmd EQ mlx5_cmd_use_polling() cmd->mode = POLL; --> cmd_work_handler (continues) if (cmd->mode == POLL) mlx5_cmd_comp_handler() // Double free The solution is to store the cmd->mode before writing the doorbell. Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Signed-off-by: Alex Vesker Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/cmd.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c index 2db5fe571594..384c1fa49081 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c @@ -807,6 +807,7 @@ static void cmd_work_handler(struct work_struct *work) unsigned long flags; bool poll_cmd = ent->polling; int alloc_ret; + int cmd_mode; sem = ent->page_queue ? &cmd->pages_sem : &cmd->sem; down(sem); @@ -853,6 +854,7 @@ static void cmd_work_handler(struct work_struct *work) set_signature(ent, !cmd->checksum_disabled); dump_command(dev, ent, 1); ent->ts1 = ktime_get_ns(); + cmd_mode = cmd->mode; if (ent->callback) schedule_delayed_work(&ent->cb_timeout_work, cb_timeout); @@ -877,7 +879,7 @@ static void cmd_work_handler(struct work_struct *work) iowrite32be(1 << ent->idx, &dev->iseg->cmd_dbell); mmiowb(); /* if not in polling don't use ent after this point */ - if (cmd->mode == CMD_MODE_POLLING || poll_cmd) { + if (cmd_mode == CMD_MODE_POLLING || poll_cmd) { poll_timeout(ent); /* make sure we read the descriptor after ownership is SW */ rmb(); -- cgit v1.2.3 From 03ae3a9caf4a59edd32b65c89c375a98ce3ea1ef Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Mon, 25 Jun 2018 12:02:40 -0700 Subject: Input: psmouse - fix button reporting for basic protocols The commit ba667650c568 ("Input: psmouse - clean up code") was pretty brain-dead and broke extra buttons reporting for variety of PS/2 mice: Genius, Thinkmouse and Intellimouse Explorer. We need to actually inspect the data coming from the device when reporting events. Fixes: ba667650c568 ("Input: psmouse - clean up code") Reported-by: Jiri Slaby Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/psmouse-base.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c index 5ff5b1952be0..d3ff1fc09af7 100644 --- a/drivers/input/mouse/psmouse-base.c +++ b/drivers/input/mouse/psmouse-base.c @@ -192,8 +192,8 @@ psmouse_ret_t psmouse_process_byte(struct psmouse *psmouse) else input_report_rel(dev, REL_WHEEL, -wheel); - input_report_key(dev, BTN_SIDE, BIT(4)); - input_report_key(dev, BTN_EXTRA, BIT(5)); + input_report_key(dev, BTN_SIDE, packet[3] & BIT(4)); + input_report_key(dev, BTN_EXTRA, packet[3] & BIT(5)); break; } break; @@ -203,13 +203,13 @@ psmouse_ret_t psmouse_process_byte(struct psmouse *psmouse) input_report_rel(dev, REL_WHEEL, -(s8) packet[3]); /* Extra buttons on Genius NewNet 3D */ - input_report_key(dev, BTN_SIDE, BIT(6)); - input_report_key(dev, BTN_EXTRA, BIT(7)); + input_report_key(dev, BTN_SIDE, packet[0] & BIT(6)); + input_report_key(dev, BTN_EXTRA, packet[0] & BIT(7)); break; case PSMOUSE_THINKPS: /* Extra button on ThinkingMouse */ - input_report_key(dev, BTN_EXTRA, BIT(3)); + input_report_key(dev, BTN_EXTRA, packet[0] & BIT(3)); /* * Without this bit of weirdness moving up gives wildly @@ -223,7 +223,7 @@ psmouse_ret_t psmouse_process_byte(struct psmouse *psmouse) * Cortron PS2 Trackball reports SIDE button in the * 4th bit of the first byte. */ - input_report_key(dev, BTN_SIDE, BIT(3)); + input_report_key(dev, BTN_SIDE, packet[0] & BIT(3)); packet[0] |= BIT(3); break; -- cgit v1.2.3 From c809195f5523dd4d09403bbb1c9732d548aa0d1e Mon Sep 17 00:00:00 2001 From: Sowmini Varadhan Date: Mon, 25 Jun 2018 06:41:25 -0700 Subject: rds: clean up loopback rds_connections on netns deletion The RDS core module creates rds_connections based on callbacks from rds_loop_transport when sending/receiving packets to local addresses. These connections will need to be cleaned up when they are created from a netns that is not init_net, and that netns is deleted. Add the changes aligned with the changes from commit ebeeb1ad9b8a ("rds: tcp: use rds_destroy_pending() to synchronize netns/module teardown and rds connection/workq management") for rds_loop_transport Reported-and-tested-by: syzbot+4c20b3866171ce8441d2@syzkaller.appspotmail.com Acked-by: Santosh Shilimkar Signed-off-by: Sowmini Varadhan Signed-off-by: David S. Miller --- net/rds/connection.c | 11 ++++++++++- net/rds/loop.c | 56 ++++++++++++++++++++++++++++++++++++++++++++++++++++ net/rds/loop.h | 2 ++ 3 files changed, 68 insertions(+), 1 deletion(-) diff --git a/net/rds/connection.c b/net/rds/connection.c index abef75da89a7..cfb05953b0e5 100644 --- a/net/rds/connection.c +++ b/net/rds/connection.c @@ -659,11 +659,19 @@ static void rds_conn_info(struct socket *sock, unsigned int len, int rds_conn_init(void) { + int ret; + + ret = rds_loop_net_init(); /* register pernet callback */ + if (ret) + return ret; + rds_conn_slab = kmem_cache_create("rds_connection", sizeof(struct rds_connection), 0, 0, NULL); - if (!rds_conn_slab) + if (!rds_conn_slab) { + rds_loop_net_exit(); return -ENOMEM; + } rds_info_register_func(RDS_INFO_CONNECTIONS, rds_conn_info); rds_info_register_func(RDS_INFO_SEND_MESSAGES, @@ -676,6 +684,7 @@ int rds_conn_init(void) void rds_conn_exit(void) { + rds_loop_net_exit(); /* unregister pernet callback */ rds_loop_exit(); WARN_ON(!hlist_empty(rds_conn_hash)); diff --git a/net/rds/loop.c b/net/rds/loop.c index dac6218a460e..feea1f96ee2a 100644 --- a/net/rds/loop.c +++ b/net/rds/loop.c @@ -33,6 +33,8 @@ #include #include #include +#include +#include #include "rds_single_path.h" #include "rds.h" @@ -40,6 +42,17 @@ static DEFINE_SPINLOCK(loop_conns_lock); static LIST_HEAD(loop_conns); +static atomic_t rds_loop_unloading = ATOMIC_INIT(0); + +static void rds_loop_set_unloading(void) +{ + atomic_set(&rds_loop_unloading, 1); +} + +static bool rds_loop_is_unloading(struct rds_connection *conn) +{ + return atomic_read(&rds_loop_unloading) != 0; +} /* * This 'loopback' transport is a special case for flows that originate @@ -165,6 +178,8 @@ void rds_loop_exit(void) struct rds_loop_connection *lc, *_lc; LIST_HEAD(tmp_list); + rds_loop_set_unloading(); + synchronize_rcu(); /* avoid calling conn_destroy with irqs off */ spin_lock_irq(&loop_conns_lock); list_splice(&loop_conns, &tmp_list); @@ -177,6 +192,46 @@ void rds_loop_exit(void) } } +static void rds_loop_kill_conns(struct net *net) +{ + struct rds_loop_connection *lc, *_lc; + LIST_HEAD(tmp_list); + + spin_lock_irq(&loop_conns_lock); + list_for_each_entry_safe(lc, _lc, &loop_conns, loop_node) { + struct net *c_net = read_pnet(&lc->conn->c_net); + + if (net != c_net) + continue; + list_move_tail(&lc->loop_node, &tmp_list); + } + spin_unlock_irq(&loop_conns_lock); + + list_for_each_entry_safe(lc, _lc, &tmp_list, loop_node) { + WARN_ON(lc->conn->c_passive); + rds_conn_destroy(lc->conn); + } +} + +static void __net_exit rds_loop_exit_net(struct net *net) +{ + rds_loop_kill_conns(net); +} + +static struct pernet_operations rds_loop_net_ops = { + .exit = rds_loop_exit_net, +}; + +int rds_loop_net_init(void) +{ + return register_pernet_device(&rds_loop_net_ops); +} + +void rds_loop_net_exit(void) +{ + unregister_pernet_device(&rds_loop_net_ops); +} + /* * This is missing .xmit_* because loop doesn't go through generic * rds_send_xmit() and doesn't call rds_recv_incoming(). .listen_stop and @@ -194,4 +249,5 @@ struct rds_transport rds_loop_transport = { .inc_free = rds_loop_inc_free, .t_name = "loopback", .t_type = RDS_TRANS_LOOP, + .t_unloading = rds_loop_is_unloading, }; diff --git a/net/rds/loop.h b/net/rds/loop.h index 469fa4b2da4f..bbc8cdd030df 100644 --- a/net/rds/loop.h +++ b/net/rds/loop.h @@ -5,6 +5,8 @@ /* loop.c */ extern struct rds_transport rds_loop_transport; +int rds_loop_net_init(void); +void rds_loop_net_exit(void); void rds_loop_exit(void); #endif -- cgit v1.2.3 From 7c8f4e6dc30996bff806285730a0bb4e714d3d52 Mon Sep 17 00:00:00 2001 From: "Jason A. Donenfeld" Date: Tue, 26 Jun 2018 01:39:32 +0200 Subject: fib_rules: match rules based on suppress_* properties too Two rules with different values of suppress_prefix or suppress_ifgroup are not the same. This fixes an -EEXIST when running: $ ip -4 rule add table main suppress_prefixlength 0 Signed-off-by: Jason A. Donenfeld Fixes: f9d4b0c1e969 ("fib_rules: move common handling of newrule delrule msgs into fib_nl2rule") Signed-off-by: David S. Miller --- net/core/fib_rules.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/net/core/fib_rules.c b/net/core/fib_rules.c index 126ffc5bc630..bc8425d81022 100644 --- a/net/core/fib_rules.c +++ b/net/core/fib_rules.c @@ -416,6 +416,14 @@ static struct fib_rule *rule_find(struct fib_rules_ops *ops, if (rule->mark && r->mark != rule->mark) continue; + if (rule->suppress_ifgroup != -1 && + r->suppress_ifgroup != rule->suppress_ifgroup) + continue; + + if (rule->suppress_prefixlen != -1 && + r->suppress_prefixlen != rule->suppress_prefixlen) + continue; + if (rule->mark_mask && r->mark_mask != rule->mark_mask) continue; -- cgit v1.2.3 From a64119415ff248efa61301783bc26551df5dabf6 Mon Sep 17 00:00:00 2001 From: Pieter Jansen van Vuuren Date: Mon, 25 Jun 2018 20:36:27 -0700 Subject: nfp: flower: fix mpls ether type detection Previously it was not possible to distinguish between mpls ether types and other ether types. This leads to incorrect classification of offloaded filters that match on mpls ether type. For example the following two filters overlap: # tc filter add dev eth0 parent ffff: \ protocol 0x8847 flower \ action mirred egress redirect dev eth1 # tc filter add dev eth0 parent ffff: \ protocol 0x0800 flower \ action mirred egress redirect dev eth2 The driver now correctly includes the mac_mpls layer where HW stores mpls fields, when it detects an mpls ether type. It also sets the MPLS_Q bit to indicate that the filter should match mpls packets. Fixes: bb055c198d9b ("nfp: add mpls match offloading support") Signed-off-by: Pieter Jansen van Vuuren Reviewed-by: Simon Horman Reviewed-by: Jakub Kicinski Signed-off-by: David S. Miller --- drivers/net/ethernet/netronome/nfp/flower/match.c | 14 ++++++++++++++ drivers/net/ethernet/netronome/nfp/flower/offload.c | 8 ++++++++ 2 files changed, 22 insertions(+) diff --git a/drivers/net/ethernet/netronome/nfp/flower/match.c b/drivers/net/ethernet/netronome/nfp/flower/match.c index 91935405f586..84f7a5dbea9d 100644 --- a/drivers/net/ethernet/netronome/nfp/flower/match.c +++ b/drivers/net/ethernet/netronome/nfp/flower/match.c @@ -123,6 +123,20 @@ nfp_flower_compile_mac(struct nfp_flower_mac_mpls *frame, NFP_FLOWER_MASK_MPLS_Q; frame->mpls_lse = cpu_to_be32(t_mpls); + } else if (dissector_uses_key(flow->dissector, + FLOW_DISSECTOR_KEY_BASIC)) { + /* Check for mpls ether type and set NFP_FLOWER_MASK_MPLS_Q + * bit, which indicates an mpls ether type but without any + * mpls fields. + */ + struct flow_dissector_key_basic *key_basic; + + key_basic = skb_flow_dissector_target(flow->dissector, + FLOW_DISSECTOR_KEY_BASIC, + flow->key); + if (key_basic->n_proto == cpu_to_be16(ETH_P_MPLS_UC) || + key_basic->n_proto == cpu_to_be16(ETH_P_MPLS_MC)) + frame->mpls_lse = cpu_to_be32(NFP_FLOWER_MASK_MPLS_Q); } } diff --git a/drivers/net/ethernet/netronome/nfp/flower/offload.c b/drivers/net/ethernet/netronome/nfp/flower/offload.c index c42e64f32333..477f584f6d28 100644 --- a/drivers/net/ethernet/netronome/nfp/flower/offload.c +++ b/drivers/net/ethernet/netronome/nfp/flower/offload.c @@ -264,6 +264,14 @@ nfp_flower_calculate_key_layers(struct nfp_app *app, case cpu_to_be16(ETH_P_ARP): return -EOPNOTSUPP; + case cpu_to_be16(ETH_P_MPLS_UC): + case cpu_to_be16(ETH_P_MPLS_MC): + if (!(key_layer & NFP_FLOWER_LAYER_MAC)) { + key_layer |= NFP_FLOWER_LAYER_MAC; + key_size += sizeof(struct nfp_flower_mac_mpls); + } + break; + /* Will be included in layer 2. */ case cpu_to_be16(ETH_P_8021Q): break; -- cgit v1.2.3 From 951a8ee6def39e25d0e60b9394e5a249ba8b2390 Mon Sep 17 00:00:00 2001 From: John Hurley Date: Mon, 25 Jun 2018 20:36:28 -0700 Subject: nfp: reject binding to shared blocks TC shared blocks allow multiple qdiscs to be grouped together and filters shared between them. Currently the chains of filters attached to a block are only flushed when the block is removed. If a qdisc is removed from a block but the block still exists, flow del messages are not passed to the callback registered for that qdisc. For the NFP, this presents the possibility of rules still existing in hw when they should be removed. Prevent binding to shared blocks until the kernel can send per qdisc del messages when block unbinds occur. tcf_block_shared() was not used outside of the core until now, so also add an empty implementation for builds with CONFIG_NET_CLS=n. Fixes: 4861738775d7 ("net: sched: introduce shared filter blocks infrastructure") Signed-off-by: John Hurley Signed-off-by: Jakub Kicinski Reviewed-by: Simon Horman Signed-off-by: David S. Miller --- drivers/net/ethernet/netronome/nfp/bpf/main.c | 3 +++ drivers/net/ethernet/netronome/nfp/flower/offload.c | 3 +++ include/net/pkt_cls.h | 5 +++++ 3 files changed, 11 insertions(+) diff --git a/drivers/net/ethernet/netronome/nfp/bpf/main.c b/drivers/net/ethernet/netronome/nfp/bpf/main.c index fcdfb8e7fdea..6b15e3b11956 100644 --- a/drivers/net/ethernet/netronome/nfp/bpf/main.c +++ b/drivers/net/ethernet/netronome/nfp/bpf/main.c @@ -202,6 +202,9 @@ static int nfp_bpf_setup_tc_block(struct net_device *netdev, if (f->binder_type != TCF_BLOCK_BINDER_TYPE_CLSACT_INGRESS) return -EOPNOTSUPP; + if (tcf_block_shared(f->block)) + return -EOPNOTSUPP; + switch (f->command) { case TC_BLOCK_BIND: return tcf_block_cb_register(f->block, diff --git a/drivers/net/ethernet/netronome/nfp/flower/offload.c b/drivers/net/ethernet/netronome/nfp/flower/offload.c index 477f584f6d28..525057bee0ed 100644 --- a/drivers/net/ethernet/netronome/nfp/flower/offload.c +++ b/drivers/net/ethernet/netronome/nfp/flower/offload.c @@ -631,6 +631,9 @@ static int nfp_flower_setup_tc_block(struct net_device *netdev, if (f->binder_type != TCF_BLOCK_BINDER_TYPE_CLSACT_INGRESS) return -EOPNOTSUPP; + if (tcf_block_shared(f->block)) + return -EOPNOTSUPP; + switch (f->command) { case TC_BLOCK_BIND: return tcf_block_cb_register(f->block, diff --git a/include/net/pkt_cls.h b/include/net/pkt_cls.h index a3c1a2c47cd4..20b059574e60 100644 --- a/include/net/pkt_cls.h +++ b/include/net/pkt_cls.h @@ -111,6 +111,11 @@ void tcf_block_put_ext(struct tcf_block *block, struct Qdisc *q, { } +static inline bool tcf_block_shared(struct tcf_block *block) +{ + return false; +} + static inline struct Qdisc *tcf_block_q(struct tcf_block *block) { return NULL; -- cgit v1.2.3 From 22db552b50fa11d8c1d171de908a1f9ef62172b7 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 19 Jun 2018 16:02:27 +0200 Subject: powerpc/powermac: Fix rtc read/write functions As Mathieu pointed out, my conversion to time64_t was incorrect and resulted in negative times to be read from the RTC. The problem is that during the conversion from a byte array to a time64_t, the 'unsigned char' variable holding the top byte gets turned into a negative signed 32-bit integer before being assigned to the 64-bit variable for any times after 1972. This changes the logic to cast to an unsigned 32-bit number first for the Macintosh time and then convert that to the Unix time, which then gives us a time in the documented 1904..2040 year range. I decided not to use the longer 1970..2106 range that other drivers use, for consistency with the literal interpretation of the register, but that could be easily changed if we decide we want to support any Mac after 2040. Just to be on the safe side, I'm also adding a WARN_ON that will trigger if either the year 2040 has come and is observed by this driver, or we run into an RTC that got set back to a pre-1970 date for some reason (the two are indistinguishable). For the RTC write functions, Andreas found another problem: both pmu_request() and cuda_request() are varargs functions, so changing the type of the arguments passed into them from 32 bit to 64 bit breaks the API for the set_rtc_time functions. This changes it back to 32 bits. The same code exists in arch/m68k/ and is patched in an identical way now in a separate patch. Fixes: 5bfd643583b2 ("powerpc: use time64_t in read_persistent_clock") Reported-by: Mathieu Malaterre Reported-by: Andreas Schwab Signed-off-by: Arnd Bergmann Tested-by: Mathieu Malaterre Signed-off-by: Michael Ellerman --- arch/powerpc/platforms/powermac/time.c | 29 ++++++++++++++++++++--------- 1 file changed, 20 insertions(+), 9 deletions(-) diff --git a/arch/powerpc/platforms/powermac/time.c b/arch/powerpc/platforms/powermac/time.c index 7c968e46736f..12e6e4d30602 100644 --- a/arch/powerpc/platforms/powermac/time.c +++ b/arch/powerpc/platforms/powermac/time.c @@ -42,7 +42,11 @@ #define DBG(x...) #endif -/* Apparently the RTC stores seconds since 1 Jan 1904 */ +/* + * Offset between Unix time (1970-based) and Mac time (1904-based). Cuda and PMU + * times wrap in 2040. If we need to handle later times, the read_time functions + * need to be changed to interpret wrapped times as post-2040. + */ #define RTC_OFFSET 2082844800 /* @@ -97,8 +101,11 @@ static time64_t cuda_get_time(void) if (req.reply_len != 7) printk(KERN_ERR "cuda_get_time: got %d byte reply\n", req.reply_len); - now = (req.reply[3] << 24) + (req.reply[4] << 16) - + (req.reply[5] << 8) + req.reply[6]; + now = (u32)((req.reply[3] << 24) + (req.reply[4] << 16) + + (req.reply[5] << 8) + req.reply[6]); + /* it's either after year 2040, or the RTC has gone backwards */ + WARN_ON(now < RTC_OFFSET); + return now - RTC_OFFSET; } @@ -106,10 +113,10 @@ static time64_t cuda_get_time(void) static int cuda_set_rtc_time(struct rtc_time *tm) { - time64_t nowtime; + u32 nowtime; struct adb_request req; - nowtime = rtc_tm_to_time64(tm) + RTC_OFFSET; + nowtime = lower_32_bits(rtc_tm_to_time64(tm) + RTC_OFFSET); if (cuda_request(&req, NULL, 6, CUDA_PACKET, CUDA_SET_TIME, nowtime >> 24, nowtime >> 16, nowtime >> 8, nowtime) < 0) @@ -140,8 +147,12 @@ static time64_t pmu_get_time(void) if (req.reply_len != 4) printk(KERN_ERR "pmu_get_time: got %d byte reply from PMU\n", req.reply_len); - now = (req.reply[0] << 24) + (req.reply[1] << 16) - + (req.reply[2] << 8) + req.reply[3]; + now = (u32)((req.reply[0] << 24) + (req.reply[1] << 16) + + (req.reply[2] << 8) + req.reply[3]); + + /* it's either after year 2040, or the RTC has gone backwards */ + WARN_ON(now < RTC_OFFSET); + return now - RTC_OFFSET; } @@ -149,10 +160,10 @@ static time64_t pmu_get_time(void) static int pmu_set_rtc_time(struct rtc_time *tm) { - time64_t nowtime; + u32 nowtime; struct adb_request req; - nowtime = rtc_tm_to_time64(tm) + RTC_OFFSET; + nowtime = lower_32_bits(rtc_tm_to_time64(tm) + RTC_OFFSET); if (pmu_request(&req, NULL, 5, PMU_SET_RTC, nowtime >> 24, nowtime >> 16, nowtime >> 8, nowtime) < 0) return -ENXIO; -- cgit v1.2.3 From 2d2595719a97c876f35b1e60e5768e58753b268c Mon Sep 17 00:00:00 2001 From: Chengguang Xu Date: Tue, 26 Jun 2018 09:16:31 +0800 Subject: nfp: cast sizeof() to int when comparing with error code sizeof() will return unsigned value so in the error check negative error code will be always larger than sizeof(). Fixes: a0d8e02c35ff ("nfp: add support for reading nffw info") Signed-off-by: Chengguang Xu Acked-by: Jakub Kicinski Signed-off-by: David S. Miller --- drivers/net/ethernet/netronome/nfp/nfpcore/nfp_nffw.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/netronome/nfp/nfpcore/nfp_nffw.c b/drivers/net/ethernet/netronome/nfp/nfpcore/nfp_nffw.c index cd34097b79f1..37a6d7822a38 100644 --- a/drivers/net/ethernet/netronome/nfp/nfpcore/nfp_nffw.c +++ b/drivers/net/ethernet/netronome/nfp/nfpcore/nfp_nffw.c @@ -232,7 +232,7 @@ struct nfp_nffw_info *nfp_nffw_info_open(struct nfp_cpp *cpp) err = nfp_cpp_read(cpp, nfp_resource_cpp_id(state->res), nfp_resource_address(state->res), fwinf, sizeof(*fwinf)); - if (err < sizeof(*fwinf)) + if (err < (int)sizeof(*fwinf)) goto err_release; if (!nffw_res_flg_init_get(fwinf)) -- cgit v1.2.3 From 22cd978e598618e82c3c3348d2069184f6884182 Mon Sep 17 00:00:00 2001 From: Andy Lutomirski Date: Tue, 26 Jun 2018 22:45:52 -0700 Subject: x86/entry/64/compat: Fix "x86/entry/64/compat: Preserve r8-r11 in int $0x80" Commit: 8bb2610bc496 ("x86/entry/64/compat: Preserve r8-r11 in int $0x80") was busted: my original patch had a minor conflict with some of the nospec changes, but "git apply" is very clever and silently accepted the patch by making the same changes to a different function in the same file. There was obviously a huge offset, but "git apply" for some reason doesn't feel any need to say so. Move the changes to the correct function. Now the test_syscall_vdso_32 selftests passes. If anyone cares to observe the original problem, try applying the patch at: https://lore.kernel.org/lkml/d4c4d9985fbe64f8c9e19291886453914b48caee.1523975710.git.luto@kernel.org/raw to the kernel at 316d097c4cd4e7f2ef50c40cff2db266593c4ec4: - "git am" and "git apply" accept the patch without any complaints at all - "patch -p1" at least prints out a message about the huge offset. Reported-by: zhijianx.li@intel.com Signed-off-by: Andy Lutomirski Cc: Arjan van de Ven Cc: Borislav Petkov Cc: Dan Williams Cc: Dave Hansen Cc: David Woodhouse Cc: Greg Kroah-Hartman Cc: Josh Poimboeuf Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: stable@vger.kernel.org #v4.17+ Fixes: 8bb2610bc496 ("x86/entry/64/compat: Preserve r8-r11 in int $0x80") Link: http://lkml.kernel.org/r/6012b922485401bc42676e804171ded262fc2ef2.1530078306.git.luto@kernel.org Signed-off-by: Ingo Molnar --- arch/x86/entry/entry_64_compat.S | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/arch/x86/entry/entry_64_compat.S b/arch/x86/entry/entry_64_compat.S index 9de7f1e1dede..7d0df78db727 100644 --- a/arch/x86/entry/entry_64_compat.S +++ b/arch/x86/entry/entry_64_compat.S @@ -84,13 +84,13 @@ ENTRY(entry_SYSENTER_compat) pushq %rdx /* pt_regs->dx */ pushq %rcx /* pt_regs->cx */ pushq $-ENOSYS /* pt_regs->ax */ - pushq %r8 /* pt_regs->r8 */ + pushq $0 /* pt_regs->r8 = 0 */ xorl %r8d, %r8d /* nospec r8 */ - pushq %r9 /* pt_regs->r9 */ + pushq $0 /* pt_regs->r9 = 0 */ xorl %r9d, %r9d /* nospec r9 */ - pushq %r10 /* pt_regs->r10 */ + pushq $0 /* pt_regs->r10 = 0 */ xorl %r10d, %r10d /* nospec r10 */ - pushq %r11 /* pt_regs->r11 */ + pushq $0 /* pt_regs->r11 = 0 */ xorl %r11d, %r11d /* nospec r11 */ pushq %rbx /* pt_regs->rbx */ xorl %ebx, %ebx /* nospec rbx */ @@ -374,13 +374,13 @@ ENTRY(entry_INT80_compat) pushq %rcx /* pt_regs->cx */ xorl %ecx, %ecx /* nospec cx */ pushq $-ENOSYS /* pt_regs->ax */ - pushq $0 /* pt_regs->r8 = 0 */ + pushq %r8 /* pt_regs->r8 */ xorl %r8d, %r8d /* nospec r8 */ - pushq $0 /* pt_regs->r9 = 0 */ + pushq %r9 /* pt_regs->r9 */ xorl %r9d, %r9d /* nospec r9 */ - pushq $0 /* pt_regs->r10 = 0 */ + pushq %r10 /* pt_regs->r10*/ xorl %r10d, %r10d /* nospec r10 */ - pushq $0 /* pt_regs->r11 = 0 */ + pushq %r11 /* pt_regs->r11 */ xorl %r11d, %r11d /* nospec r11 */ pushq %rbx /* pt_regs->rbx */ xorl %ebx, %ebx /* nospec rbx */ -- cgit v1.2.3 From ec348020566009d3da9b99f07c05814d13969c78 Mon Sep 17 00:00:00 2001 From: Andy Lutomirski Date: Tue, 26 Jun 2018 22:17:17 -0700 Subject: selftests/x86/sigreturn/64: Fix spurious failures on AMD CPUs When I wrote the sigreturn test, I didn't realize that AMD's busted IRET behavior was different from Intel's busted IRET behavior: On AMD CPUs, the CPU leaks the high 32 bits of the kernel stack pointer to certain userspace contexts. Gee, thanks. There's very little the kernel can do about it. Modify the test so it passes. Signed-off-by: Andy Lutomirski Cc: Borislav Petkov Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/86e7fd3564497f657de30a36da4505799eebef01.1530076529.git.luto@kernel.org Signed-off-by: Ingo Molnar --- tools/testing/selftests/x86/sigreturn.c | 46 +++++++++++++++++++++------------ 1 file changed, 29 insertions(+), 17 deletions(-) diff --git a/tools/testing/selftests/x86/sigreturn.c b/tools/testing/selftests/x86/sigreturn.c index 246145b84a12..2559e2c01793 100644 --- a/tools/testing/selftests/x86/sigreturn.c +++ b/tools/testing/selftests/x86/sigreturn.c @@ -612,19 +612,38 @@ static int test_valid_sigreturn(int cs_bits, bool use_16bit_ss, int force_ss) greg_t req = requested_regs[i], res = resulting_regs[i]; if (i == REG_TRAPNO || i == REG_IP) continue; /* don't care */ - if (i == REG_SP) { - printf("\tSP: %llx -> %llx\n", (unsigned long long)req, - (unsigned long long)res); + if (i == REG_SP) { /* - * In many circumstances, the high 32 bits of rsp - * are zeroed. For example, we could be a real - * 32-bit program, or we could hit any of a number - * of poorly-documented IRET or segmented ESP - * oddities. If this happens, it's okay. + * If we were using a 16-bit stack segment, then + * the kernel is a bit stuck: IRET only restores + * the low 16 bits of ESP/RSP if SS is 16-bit. + * The kernel uses a hack to restore bits 31:16, + * but that hack doesn't help with bits 63:32. + * On Intel CPUs, bits 63:32 end up zeroed, and, on + * AMD CPUs, they leak the high bits of the kernel + * espfix64 stack pointer. There's very little that + * the kernel can do about it. + * + * Similarly, if we are returning to a 32-bit context, + * the CPU will often lose the high 32 bits of RSP. */ - if (res == (req & 0xFFFFFFFF)) - continue; /* OK; not expected to work */ + + if (res == req) + continue; + + if (cs_bits != 64 && ((res ^ req) & 0xFFFFFFFF) == 0) { + printf("[NOTE]\tSP: %llx -> %llx\n", + (unsigned long long)req, + (unsigned long long)res); + continue; + } + + printf("[FAIL]\tSP mismatch: requested 0x%llx; got 0x%llx\n", + (unsigned long long)requested_regs[i], + (unsigned long long)resulting_regs[i]); + nerrs++; + continue; } bool ignore_reg = false; @@ -663,13 +682,6 @@ static int test_valid_sigreturn(int cs_bits, bool use_16bit_ss, int force_ss) } if (requested_regs[i] != resulting_regs[i] && !ignore_reg) { - /* - * SP is particularly interesting here. The - * usual cause of failures is that we hit the - * nasty IRET case of returning to a 16-bit SS, - * in which case bits 16:31 of the *kernel* - * stack pointer persist in ESP. - */ printf("[FAIL]\tReg %d mismatch: requested 0x%llx; got 0x%llx\n", i, (unsigned long long)requested_regs[i], (unsigned long long)resulting_regs[i]); -- cgit v1.2.3 From e8a445dea219c32727016af14f847d2e8f7ebec8 Mon Sep 17 00:00:00 2001 From: Andy Lutomirski Date: Tue, 26 Jun 2018 22:17:18 -0700 Subject: selftests/x86/sigreturn: Do minor cleanups We have short names for the requested and resulting register values. Use them instead of spelling out the whole register entry for each case. Signed-off-by: Andy Lutomirski Cc: Borislav Petkov Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/bb3bc1f923a2f6fe7912d22a1068fe29d6033d38.1530076529.git.luto@kernel.org Signed-off-by: Ingo Molnar --- tools/testing/selftests/x86/sigreturn.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/tools/testing/selftests/x86/sigreturn.c b/tools/testing/selftests/x86/sigreturn.c index 2559e2c01793..4d9dc3f2fd70 100644 --- a/tools/testing/selftests/x86/sigreturn.c +++ b/tools/testing/selftests/x86/sigreturn.c @@ -610,6 +610,7 @@ static int test_valid_sigreturn(int cs_bits, bool use_16bit_ss, int force_ss) */ for (int i = 0; i < NGREG; i++) { greg_t req = requested_regs[i], res = resulting_regs[i]; + if (i == REG_TRAPNO || i == REG_IP) continue; /* don't care */ @@ -673,18 +674,18 @@ static int test_valid_sigreturn(int cs_bits, bool use_16bit_ss, int force_ss) #endif /* Sanity check on the kernel */ - if (i == REG_CX && requested_regs[i] != resulting_regs[i]) { + if (i == REG_CX && req != res) { printf("[FAIL]\tCX (saved SP) mismatch: requested 0x%llx; got 0x%llx\n", - (unsigned long long)requested_regs[i], - (unsigned long long)resulting_regs[i]); + (unsigned long long)req, + (unsigned long long)res); nerrs++; continue; } - if (requested_regs[i] != resulting_regs[i] && !ignore_reg) { + if (req != res && !ignore_reg) { printf("[FAIL]\tReg %d mismatch: requested 0x%llx; got 0x%llx\n", - i, (unsigned long long)requested_regs[i], - (unsigned long long)resulting_regs[i]); + i, (unsigned long long)req, + (unsigned long long)res); nerrs++; } } -- cgit v1.2.3 From cfe19577047e74cdac5826adbdc2337d8437f8fb Mon Sep 17 00:00:00 2001 From: "Kirill A. Shutemov" Date: Mon, 25 Jun 2018 15:08:52 +0300 Subject: x86/efi: Fix efi_call_phys_epilog() with CONFIG_X86_5LEVEL=y Open-coded page table entry checks don't work correctly when we fold the page table level at runtime. pgd_present() on 4-level paging machine always returns true, but open-coded version of the check may return false-negative result and we silently skip the rest of the loop body in efi_call_phys_epilog(). Replace open-coded checks with proper helpers. Signed-off-by: Kirill A. Shutemov Acked-by: Ard Biesheuvel Cc: Andrey Ryabinin Cc: Baoquan He Cc: Linus Torvalds Cc: Matt Fleming Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: stable@vger.kernel.org # v4.12+ Fixes: 94133e46a0f5 ("x86/efi: Correct EFI identity mapping under 'efi=old_map' when KASLR is enabled") Link: http://lkml.kernel.org/r/20180625120852.18300-1-kirill.shutemov@linux.intel.com Signed-off-by: Ingo Molnar --- arch/x86/platform/efi/efi_64.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/x86/platform/efi/efi_64.c b/arch/x86/platform/efi/efi_64.c index e01f7ceb9e7a..77873ce700ae 100644 --- a/arch/x86/platform/efi/efi_64.c +++ b/arch/x86/platform/efi/efi_64.c @@ -166,14 +166,14 @@ void __init efi_call_phys_epilog(pgd_t *save_pgd) pgd = pgd_offset_k(pgd_idx * PGDIR_SIZE); set_pgd(pgd_offset_k(pgd_idx * PGDIR_SIZE), save_pgd[pgd_idx]); - if (!(pgd_val(*pgd) & _PAGE_PRESENT)) + if (!pgd_present(*pgd)) continue; for (i = 0; i < PTRS_PER_P4D; i++) { p4d = p4d_offset(pgd, pgd_idx * PGDIR_SIZE + i * P4D_SIZE); - if (!(p4d_val(*p4d) & _PAGE_PRESENT)) + if (!p4d_present(*p4d)) continue; pud = (pud_t *)p4d_page_vaddr(*p4d); -- cgit v1.2.3 From b8c1e4293a5d1dfd19ab7b0984bfce8191940500 Mon Sep 17 00:00:00 2001 From: "Kirill A. Shutemov" Date: Tue, 26 Jun 2018 13:03:41 +0300 Subject: x86/mm: Drop unneeded __always_inline for p4d page table helpers This reverts the following commits: 1ea66554d3b0 ("x86/mm: Mark p4d_offset() __always_inline") 046c0dbec023 ("x86: Mark native_set_p4d() as __always_inline") p4d_offset(), native_set_p4d() and native_p4d_clear() were marked __always_inline in attempt to move __pgtable_l5_enabled into __initdata section. It was required as KASAN initialization code is a user of USE_EARLY_PGTABLE_L5, so all pgtable_l5_enabled() translated to __pgtable_l5_enabled there. This includes pgtable_l5_enabled() called from inline p4d helpers. If compiler would decided to not inline these p4d helpers, but leave them standalone, we end up with section mismatch. We don't need __always_inline here anymore. __pgtable_l5_enabled moved back to be __ro_after_init. See the following commit: 51be13351517 ("Revert "x86/mm: Mark __pgtable_l5_enabled __initdata"") Signed-off-by: Kirill A. Shutemov Cc: Arnd Bergmann Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/20180626100341.49910-1-kirill.shutemov@linux.intel.com Signed-off-by: Ingo Molnar --- arch/x86/include/asm/pgtable.h | 2 +- arch/x86/include/asm/pgtable_64.h | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h index 99ecde23c3ec..5715647fc4fe 100644 --- a/arch/x86/include/asm/pgtable.h +++ b/arch/x86/include/asm/pgtable.h @@ -898,7 +898,7 @@ static inline unsigned long pgd_page_vaddr(pgd_t pgd) #define pgd_page(pgd) pfn_to_page(pgd_pfn(pgd)) /* to find an entry in a page-table-directory. */ -static __always_inline p4d_t *p4d_offset(pgd_t *pgd, unsigned long address) +static inline p4d_t *p4d_offset(pgd_t *pgd, unsigned long address) { if (!pgtable_l5_enabled()) return (p4d_t *)pgd; diff --git a/arch/x86/include/asm/pgtable_64.h b/arch/x86/include/asm/pgtable_64.h index 0fdcd21dadbd..3c5385f9a88f 100644 --- a/arch/x86/include/asm/pgtable_64.h +++ b/arch/x86/include/asm/pgtable_64.h @@ -216,7 +216,7 @@ static inline pgd_t pti_set_user_pgd(pgd_t *pgdp, pgd_t pgd) } #endif -static __always_inline void native_set_p4d(p4d_t *p4dp, p4d_t p4d) +static inline void native_set_p4d(p4d_t *p4dp, p4d_t p4d) { pgd_t pgd; @@ -230,7 +230,7 @@ static __always_inline void native_set_p4d(p4d_t *p4dp, p4d_t p4d) *p4dp = native_make_p4d(native_pgd_val(pgd)); } -static __always_inline void native_p4d_clear(p4d_t *p4d) +static inline void native_p4d_clear(p4d_t *p4d) { native_set_p4d(p4d, native_make_p4d(0)); } -- cgit v1.2.3 From 9331510135640429711afbd0c810686100824a79 Mon Sep 17 00:00:00 2001 From: Mathieu Malaterre Date: Tue, 26 Jun 2018 22:23:00 +0200 Subject: perf/core: Move inline keyword at the beginning of declaration MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix non-fatal warning triggered during compilation with W=1: kernel/events/core.c:6106:1: warning: ‘inline’ is not at beginning of declaration [-Wold-style-declaration] static void __always_inline ^~~~~~ Signed-off-by: Mathieu Malaterre Cc: Alexander Shishkin Cc: Arnaldo Carvalho de Melo Cc: Jiri Olsa Cc: Linus Torvalds Cc: Namhyung Kim Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/20180626202301.20270-1-malat@debian.org Signed-off-by: Ingo Molnar --- kernel/events/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/events/core.c b/kernel/events/core.c index 80cca2b30c4f..8f0434a9951a 100644 --- a/kernel/events/core.c +++ b/kernel/events/core.c @@ -6482,7 +6482,7 @@ void perf_prepare_sample(struct perf_event_header *header, data->phys_addr = perf_virt_to_phys(data->addr); } -static void __always_inline +static __always_inline void __perf_event_output(struct perf_event *event, struct perf_sample_data *data, struct pt_regs *regs, -- cgit v1.2.3 From 9e421b8fffb92bfd1c274f1deae611a6ab99d8a7 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Tue, 26 Jun 2018 12:09:51 +0200 Subject: Documentation: admin-guide: intel_pstate: Fix sysfs path Fix an incorrect sysfs path in the intel_pstate admin-guide documentation. Fixes: 33fc30b47098 (cpufreq: intel_pstate: Document the current behavior and user interface) Reported-by: Pawit Pornkitprasan Signed-off-by: Rafael J. Wysocki --- Documentation/admin-guide/pm/intel_pstate.rst | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/Documentation/admin-guide/pm/intel_pstate.rst b/Documentation/admin-guide/pm/intel_pstate.rst index 8b9164990956..d74fb572f6cc 100644 --- a/Documentation/admin-guide/pm/intel_pstate.rst +++ b/Documentation/admin-guide/pm/intel_pstate.rst @@ -324,8 +324,7 @@ Global Attributes ``intel_pstate`` exposes several global attributes (files) in ``sysfs`` to control its functionality at the system level. They are located in the -``/sys/devices/system/cpu/cpufreq/intel_pstate/`` directory and affect all -CPUs. +``/sys/devices/system/cpu/intel_pstate/`` directory and affect all CPUs. Some of them are not present if the ``intel_pstate=per_cpu_perf_limits`` argument is passed to the kernel in the command line. -- cgit v1.2.3 From 649f53a3e4cf6873741673b9271275e484c56194 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Tue, 26 Jun 2018 17:20:43 +0200 Subject: Documentation: intel_pstate: Describe hwp_dynamic_boost sysfs knob Document the recently introduced hwp_dynamic_boost sysfs knob allowing user space to tell intel_pstate to use iowait boosting in the active mode with HWP enabled (to improve performance). Signed-off-by: Rafael J. Wysocki Acked-by: Srinivas Pandruvada --- Documentation/admin-guide/pm/intel_pstate.rst | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/Documentation/admin-guide/pm/intel_pstate.rst b/Documentation/admin-guide/pm/intel_pstate.rst index d74fb572f6cc..8f1d3de449b5 100644 --- a/Documentation/admin-guide/pm/intel_pstate.rst +++ b/Documentation/admin-guide/pm/intel_pstate.rst @@ -378,6 +378,17 @@ argument is passed to the kernel in the command line. but it affects the maximum possible value of per-policy P-state limits (see `Interpretation of Policy Attributes`_ below for details). +``hwp_dynamic_boost`` + This attribute is only present if ``intel_pstate`` works in the + `active mode with the HWP feature enabled `_ in + the processor. If set (equal to 1), it causes the minimum P-state limit + to be increased dynamically for a short time whenever a task previously + waiting on I/O is selected to run on a given logical CPU (the purpose + of this mechanism is to improve performance). + + This setting has no effect on logical CPUs whose minimum P-state limit + is directly set to the highest non-turbo P-state or above it. + .. _status_attr: ``status`` -- cgit v1.2.3 From d79d0d8ad0cb3d782b41631dfeac8eb05e414bcd Mon Sep 17 00:00:00 2001 From: Dmitry Vyukov Date: Wed, 27 Jun 2018 11:07:15 +0200 Subject: x86/mm: Clean up the printk()s in show_fault_oops() - Remove 'nx_warning' and 'smep_warning', which are just pointless obfuscation. - Also convert to pr_crit(). Suggested-by: Joe Perches Signed-off-by: Dmitry Vyukov Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/20180627090715.28076-1-dvyukov@gmail.com Signed-off-by: Ingo Molnar --- arch/x86/mm/fault.c | 11 ++++------- 1 file changed, 4 insertions(+), 7 deletions(-) diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c index ee85766e6329..2aafa6ab6103 100644 --- a/arch/x86/mm/fault.c +++ b/arch/x86/mm/fault.c @@ -641,11 +641,6 @@ static int is_f00f_bug(struct pt_regs *regs, unsigned long address) return 0; } -static const char nx_warning[] = KERN_CRIT -"kernel tried to execute NX-protected page - exploit attempt? (uid: %d)\n"; -static const char smep_warning[] = KERN_CRIT -"unable to execute userspace code (SMEP?) (uid: %d)\n"; - static void show_fault_oops(struct pt_regs *regs, unsigned long error_code, unsigned long address) @@ -664,11 +659,13 @@ show_fault_oops(struct pt_regs *regs, unsigned long error_code, pte = lookup_address_in_pgd(pgd, address, &level); if (pte && pte_present(*pte) && !pte_exec(*pte)) - printk(nx_warning, from_kuid(&init_user_ns, current_uid())); + pr_crit("kernel tried to execute NX-protected page - exploit attempt? (uid: %d)\n", + from_kuid(&init_user_ns, current_uid())); if (pte && pte_present(*pte) && pte_exec(*pte) && (pgd_flags(*pgd) & _PAGE_USER) && (__read_cr4() & X86_CR4_SMEP)) - printk(smep_warning, from_kuid(&init_user_ns, current_uid())); + pr_crit("unable to execute userspace code (SMEP?) (uid: %d)\n", + from_kuid(&init_user_ns, current_uid())); } pr_alert("BUG: unable to handle kernel %s at %px\n", -- cgit v1.2.3 From 3eb1b955cd7ed1e621ace856710006c2a8a7f231 Mon Sep 17 00:00:00 2001 From: Keerthy Date: Tue, 5 Jun 2018 15:37:51 +0530 Subject: ARM: dts: da850: Fix interrups property for gpio The intc #interrupt-cells is equal to 1. Currently gpio node has 2 cells per IRQ which is wrong. Remove the additional cell for each of the interrupts. Signed-off-by: Keerthy Fixes: 2e38b946dc54 ("ARM: davinci: da850: add GPIO DT node") Signed-off-by: Sekhar Nori --- arch/arm/boot/dts/da850.dtsi | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi index f6f1597b03df..0f4f817a9e22 100644 --- a/arch/arm/boot/dts/da850.dtsi +++ b/arch/arm/boot/dts/da850.dtsi @@ -549,11 +549,7 @@ gpio-controller; #gpio-cells = <2>; reg = <0x226000 0x1000>; - interrupts = <42 IRQ_TYPE_EDGE_BOTH - 43 IRQ_TYPE_EDGE_BOTH 44 IRQ_TYPE_EDGE_BOTH - 45 IRQ_TYPE_EDGE_BOTH 46 IRQ_TYPE_EDGE_BOTH - 47 IRQ_TYPE_EDGE_BOTH 48 IRQ_TYPE_EDGE_BOTH - 49 IRQ_TYPE_EDGE_BOTH 50 IRQ_TYPE_EDGE_BOTH>; + interrupts = <42 43 44 45 46 47 48 49 50>; ti,ngpio = <144>; ti,davinci-gpio-unbanked = <0>; status = "disabled"; -- cgit v1.2.3 From a685557fbbc3122ed11e8ad3fa63a11ebc5de8c3 Mon Sep 17 00:00:00 2001 From: Mike Snitzer Date: Tue, 26 Jun 2018 12:04:23 -0400 Subject: dm thin: handle running out of data space vs concurrent discard Discards issued to a DM thin device can complete to userspace (via fstrim) _before_ the metadata changes associated with the discards is reflected in the thinp superblock (e.g. free blocks). As such, if a user constructs a test that loops repeatedly over these steps, block allocation can fail due to discards not having completed yet: 1) fill thin device via filesystem file 2) remove file 3) fstrim From initial report, here: https://www.redhat.com/archives/dm-devel/2018-April/msg00022.html "The root cause of this issue is that dm-thin will first remove mapping and increase corresponding blocks' reference count to prevent them from being reused before DISCARD bios get processed by the underlying layers. However. increasing blocks' reference count could also increase the nr_allocated_this_transaction in struct sm_disk which makes smd->old_ll.nr_allocated + smd->nr_allocated_this_transaction bigger than smd->old_ll.nr_blocks. In this case, alloc_data_block() will never commit metadata to reset the begin pointer of struct sm_disk, because sm_disk_get_nr_free() always return an underflow value." While there is room for improvement to the space-map accounting that thinp is making use of: the reality is this test is inherently racey and will result in the previous iteration's fstrim's discard(s) completing vs concurrent block allocation, via dd, in the next iteration of the loop. No amount of space map accounting improvements will be able to allow user's to use a block before a discard of that block has completed. So the best we can really do is allow DM thinp to gracefully handle such aggressive use of all the pool's data by degrading the pool into out-of-data-space (OODS) mode. We _should_ get that behaviour already (if space map accounting didn't falsely cause alloc_data_block() to believe free space was available).. but short of that we handle the current reality that dm_pool_alloc_data_block() can return -ENOSPC. Reported-by: Dennis Yang Cc: stable@vger.kernel.org Signed-off-by: Mike Snitzer --- drivers/md/dm-thin.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/drivers/md/dm-thin.c b/drivers/md/dm-thin.c index 7945238df1c0..b900723bbd0f 100644 --- a/drivers/md/dm-thin.c +++ b/drivers/md/dm-thin.c @@ -1386,6 +1386,8 @@ static void schedule_external_copy(struct thin_c *tc, dm_block_t virt_block, static void set_pool_mode(struct pool *pool, enum pool_mode new_mode); +static void requeue_bios(struct pool *pool); + static void check_for_space(struct pool *pool) { int r; @@ -1398,8 +1400,10 @@ static void check_for_space(struct pool *pool) if (r) return; - if (nr_free) + if (nr_free) { set_pool_mode(pool, PM_WRITE); + requeue_bios(pool); + } } /* @@ -1476,7 +1480,10 @@ static int alloc_data_block(struct thin_c *tc, dm_block_t *result) r = dm_pool_alloc_data_block(pool->pmd, result); if (r) { - metadata_operation_failed(pool, "dm_pool_alloc_data_block", r); + if (r == -ENOSPC) + set_pool_mode(pool, PM_OUT_OF_DATA_SPACE); + else + metadata_operation_failed(pool, "dm_pool_alloc_data_block", r); return r; } -- cgit v1.2.3 From 86676c4685f774d818f7a6c401c925bbf2a92903 Mon Sep 17 00:00:00 2001 From: Katsuhiro Suzuki Date: Tue, 19 Jun 2018 13:12:05 +0900 Subject: arm64: dts: uniphier: fix widget name of headphone for LD11/LD20 boards This patch fixes wrong name of headphone widget for receiving events of insert/remove headphone plug from simple-card or audio-graph-card. If we use wrong widget name then we get warning messages such as "asoc-audio-graph-card sound: ASoC: DAPM unknown pin Headphones" when the plug is inserted or removed from headphone jack. Fixes: fb21a0acaa2b7 ("arm64: dts: uniphier: add sound node") Signed-off-by: Katsuhiro Suzuki Signed-off-by: Masahiro Yamada Signed-off-by: Olof Johansson --- arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts | 2 +- arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts b/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts index 9b4dc41703e3..ae3b5adf32df 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts +++ b/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts @@ -54,7 +54,7 @@ sound { compatible = "audio-graph-card"; label = "UniPhier LD11"; - widgets = "Headphone", "Headphone Jack"; + widgets = "Headphone", "Headphones"; dais = <&i2s_port2 &i2s_port3 &i2s_port4 diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts b/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts index fe6608ea3277..7919233c9ce2 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts +++ b/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts @@ -54,7 +54,7 @@ sound { compatible = "audio-graph-card"; label = "UniPhier LD20"; - widgets = "Headphone", "Headphone Jack"; + widgets = "Headphone", "Headphones"; dais = <&i2s_port2 &i2s_port3 &i2s_port4 -- cgit v1.2.3 From 3b41c3e28e9882760b78864487558b66aaa6261e Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Wed, 27 Jun 2018 08:40:44 -0700 Subject: checkpatch: remove warning for 'old' stable@kernel.org address It may not be the actual real stable mailing list address, but the stable scripts to actually pick up on the traditional way to mark stable patches. There are also reasons to explicitly avoid using the actual mailing list address, since security patches with embargo dates generally do want the stable marking, but don't want tools etc to mistakenly send the patch out to the mailing list early. So don't warn for things that are still actively used and explicitly supported. Signed-off-by: Linus Torvalds --- scripts/checkpatch.pl | 6 ------ 1 file changed, 6 deletions(-) diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl index e3b7362b0ee4..a9c05506e325 100755 --- a/scripts/checkpatch.pl +++ b/scripts/checkpatch.pl @@ -2606,12 +2606,6 @@ sub process { "A patch subject line should describe the change not the tool that found it\n" . $herecurr); } -# Check for old stable address - if ($line =~ /^\s*cc:\s*.*?.*$/i) { - ERROR("STABLE_ADDRESS", - "The 'stable' address should be 'stable\@vger.kernel.org'\n" . $herecurr); - } - # Check for unwanted Gerrit info if ($in_commit_log && $line =~ /^\s*change-id:/i) { ERROR("GERRIT_CHANGE_ID", -- cgit v1.2.3 From 429388682dc266e7a693f9c27e3aabd341d55343 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 22 Jun 2018 09:31:15 +0100 Subject: arm64: Avoid flush_icache_range() in alternatives patching code The implementation of flush_icache_range() includes instruction sequences which are themselves patched at runtime, so it is not safe to call from the patching framework. This patch reworks the alternatives cache-flushing code so that it rolls its own internal D-cache maintenance using DC CIVAC before invalidating the entire I-cache after all alternatives have been applied at boot. Modules don't cause any issues, since flush_icache_range() is safe to call by the time they are loaded. Acked-by: Mark Rutland Reported-by: Rohit Khanna Cc: Alexander Van Brunt Signed-off-by: Will Deacon Signed-off-by: Catalin Marinas --- arch/arm64/include/asm/alternative.h | 7 ++++- arch/arm64/kernel/alternative.c | 51 +++++++++++++++++++++++++++++++----- arch/arm64/kernel/module.c | 5 ++-- 3 files changed, 52 insertions(+), 11 deletions(-) diff --git a/arch/arm64/include/asm/alternative.h b/arch/arm64/include/asm/alternative.h index a91933b1e2e6..4b650ec1d7dd 100644 --- a/arch/arm64/include/asm/alternative.h +++ b/arch/arm64/include/asm/alternative.h @@ -28,7 +28,12 @@ typedef void (*alternative_cb_t)(struct alt_instr *alt, __le32 *origptr, __le32 *updptr, int nr_inst); void __init apply_alternatives_all(void); -void apply_alternatives(void *start, size_t length); + +#ifdef CONFIG_MODULES +void apply_alternatives_module(void *start, size_t length); +#else +static inline void apply_alternatives_module(void *start, size_t length) { } +#endif #define ALTINSTR_ENTRY(feature,cb) \ " .word 661b - .\n" /* label */ \ diff --git a/arch/arm64/kernel/alternative.c b/arch/arm64/kernel/alternative.c index 5c4bce4ac381..36fb069fd049 100644 --- a/arch/arm64/kernel/alternative.c +++ b/arch/arm64/kernel/alternative.c @@ -122,7 +122,30 @@ static void patch_alternative(struct alt_instr *alt, } } -static void __apply_alternatives(void *alt_region, bool use_linear_alias) +/* + * We provide our own, private D-cache cleaning function so that we don't + * accidentally call into the cache.S code, which is patched by us at + * runtime. + */ +static void clean_dcache_range_nopatch(u64 start, u64 end) +{ + u64 cur, d_size, ctr_el0; + + ctr_el0 = read_sanitised_ftr_reg(SYS_CTR_EL0); + d_size = 4 << cpuid_feature_extract_unsigned_field(ctr_el0, + CTR_DMINLINE_SHIFT); + cur = start & ~(d_size - 1); + do { + /* + * We must clean+invalidate to the PoC in order to avoid + * Cortex-A53 errata 826319, 827319, 824069 and 819472 + * (this corresponds to ARM64_WORKAROUND_CLEAN_CACHE) + */ + asm volatile("dc civac, %0" : : "r" (cur) : "memory"); + } while (cur += d_size, cur < end); +} + +static void __apply_alternatives(void *alt_region, bool is_module) { struct alt_instr *alt; struct alt_region *region = alt_region; @@ -145,7 +168,7 @@ static void __apply_alternatives(void *alt_region, bool use_linear_alias) pr_info_once("patching kernel code\n"); origptr = ALT_ORIG_PTR(alt); - updptr = use_linear_alias ? lm_alias(origptr) : origptr; + updptr = is_module ? origptr : lm_alias(origptr); nr_inst = alt->orig_len / AARCH64_INSN_SIZE; if (alt->cpufeature < ARM64_CB_PATCH) @@ -155,8 +178,20 @@ static void __apply_alternatives(void *alt_region, bool use_linear_alias) alt_cb(alt, origptr, updptr, nr_inst); - flush_icache_range((uintptr_t)origptr, - (uintptr_t)(origptr + nr_inst)); + if (!is_module) { + clean_dcache_range_nopatch((u64)origptr, + (u64)(origptr + nr_inst)); + } + } + + /* + * The core module code takes care of cache maintenance in + * flush_module_icache(). + */ + if (!is_module) { + dsb(ish); + __flush_icache_all(); + isb(); } } @@ -178,7 +213,7 @@ static int __apply_alternatives_multi_stop(void *unused) isb(); } else { BUG_ON(alternatives_applied); - __apply_alternatives(®ion, true); + __apply_alternatives(®ion, false); /* Barriers provided by the cache flushing */ WRITE_ONCE(alternatives_applied, 1); } @@ -192,12 +227,14 @@ void __init apply_alternatives_all(void) stop_machine(__apply_alternatives_multi_stop, NULL, cpu_online_mask); } -void apply_alternatives(void *start, size_t length) +#ifdef CONFIG_MODULES +void apply_alternatives_module(void *start, size_t length) { struct alt_region region = { .begin = start, .end = start + length, }; - __apply_alternatives(®ion, false); + __apply_alternatives(®ion, true); } +#endif diff --git a/arch/arm64/kernel/module.c b/arch/arm64/kernel/module.c index 155fd91e78f4..f0f27aeefb73 100644 --- a/arch/arm64/kernel/module.c +++ b/arch/arm64/kernel/module.c @@ -448,9 +448,8 @@ int module_finalize(const Elf_Ehdr *hdr, const char *secstrs = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset; for (s = sechdrs, se = sechdrs + hdr->e_shnum; s < se; s++) { - if (strcmp(".altinstructions", secstrs + s->sh_name) == 0) { - apply_alternatives((void *)s->sh_addr, s->sh_size); - } + if (strcmp(".altinstructions", secstrs + s->sh_name) == 0) + apply_alternatives_module((void *)s->sh_addr, s->sh_size); #ifdef CONFIG_ARM64_MODULE_PLTS if (IS_ENABLED(CONFIG_DYNAMIC_FTRACE) && !strcmp(".text.ftrace_trampoline", secstrs + s->sh_name)) -- cgit v1.2.3 From 24fe1b0efad4fcdd32ce46cffeab297f22581707 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 22 Jun 2018 09:31:16 +0100 Subject: arm64: Remove unnecessary ISBs from set_{pte,pmd,pud} Commit 7f0b1bf04511 ("arm64: Fix barriers used for page table modifications") fixed a reported issue with fixmap page-table entries not being visible to the walker due to a missing DSB instruction. At the same time, it added ISB instructions to the arm64 set_{pte,pmd,pud} functions, which are not required by the architecture and make little sense in isolation. Remove the redundant ISBs. Acked-by: Catalin Marinas Acked-by: Mark Rutland Signed-off-by: Will Deacon Signed-off-by: Catalin Marinas --- arch/arm64/include/asm/pgtable.h | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/arch/arm64/include/asm/pgtable.h b/arch/arm64/include/asm/pgtable.h index 9f82d6b53851..1bdeca8918a6 100644 --- a/arch/arm64/include/asm/pgtable.h +++ b/arch/arm64/include/asm/pgtable.h @@ -224,10 +224,8 @@ static inline void set_pte(pte_t *ptep, pte_t pte) * Only if the new pte is valid and kernel, otherwise TLB maintenance * or update_mmu_cache() have the necessary barriers. */ - if (pte_valid_not_user(pte)) { + if (pte_valid_not_user(pte)) dsb(ishst); - isb(); - } } extern void __sync_icache_dcache(pte_t pteval); @@ -434,7 +432,6 @@ static inline void set_pmd(pmd_t *pmdp, pmd_t pmd) { WRITE_ONCE(*pmdp, pmd); dsb(ishst); - isb(); } static inline void pmd_clear(pmd_t *pmdp) @@ -485,7 +482,6 @@ static inline void set_pud(pud_t *pudp, pud_t pud) { WRITE_ONCE(*pudp, pud); dsb(ishst); - isb(); } static inline void pud_clear(pud_t *pudp) -- cgit v1.2.3 From 0e49740c35c1d8f0c8fd84e9387b6a1007228d6f Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Wed, 27 Jun 2018 13:07:07 -0500 Subject: MAINTAINERS: Timur has a kernel.org address Timur Tabi no longer works for Qualcomm, and he now has a kernel.org email address, so update MAINTAINERS accordingly. Signed-off-by: Timur Tabi Signed-off-by: Linus Torvalds --- MAINTAINERS | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index f0896c04811e..bfb8a18d4793 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5673,7 +5673,7 @@ F: drivers/crypto/caam/ F: Documentation/devicetree/bindings/crypto/fsl-sec4.txt FREESCALE DIU FRAMEBUFFER DRIVER -M: Timur Tabi +M: Timur Tabi L: linux-fbdev@vger.kernel.org S: Maintained F: drivers/video/fbdev/fsl-diu-fb.* @@ -5773,7 +5773,7 @@ S: Maintained F: drivers/net/wan/fsl_ucc_hdlc* FREESCALE QUICC ENGINE UCC UART DRIVER -M: Timur Tabi +M: Timur Tabi L: linuxppc-dev@lists.ozlabs.org S: Maintained F: drivers/tty/serial/ucc_uart.c @@ -5797,7 +5797,7 @@ F: drivers/net/ethernet/freescale/fs_enet/ F: include/linux/fs_enet_pd.h FREESCALE SOC SOUND DRIVERS -M: Timur Tabi +M: Timur Tabi M: Nicolin Chen M: Xiubo Li R: Fabio Estevam @@ -11813,9 +11813,9 @@ F: Documentation/devicetree/bindings/opp/kryo-cpufreq.txt F: drivers/cpufreq/qcom-cpufreq-kryo.c QUALCOMM EMAC GIGABIT ETHERNET DRIVER -M: Timur Tabi +M: Timur Tabi L: netdev@vger.kernel.org -S: Supported +S: Maintained F: drivers/net/ethernet/qualcomm/emac/ QUALCOMM HEXAGON ARCHITECTURE -- cgit v1.2.3 From d9e98ee248b04b2462e7411b204d420d04f1ba27 Mon Sep 17 00:00:00 2001 From: Leo Liu Date: Mon, 25 Jun 2018 14:56:06 -0400 Subject: drm/amdgpu: fix UBSAN: Undefined behaviour for amdgpu_fence.c Here is the UBSAN dump: [ 3.866656] index 2 is out of range for type 'amdgpu_uvd_inst [2]' [ 3.866693] Workqueue: events work_for_cpu_fn [ 3.866702] Call Trace: [ 3.866710] dump_stack+0x85/0xc5 [ 3.866719] ubsan_epilogue+0x9/0x40 [ 3.866727] __ubsan_handle_out_of_bounds+0x89/0x90 [ 3.866737] ? rcu_read_lock_sched_held+0x58/0x60 [ 3.866746] ? __kmalloc+0x26c/0x2d0 [ 3.866846] amdgpu_fence_driver_start_ring+0x259/0x280 [amdgpu] [ 3.866896] amdgpu_ring_init+0x12c/0x710 [amdgpu] [ 3.866906] ? sprintf+0x42/0x50 [ 3.866956] amdgpu_gfx_kiq_init_ring+0x1bc/0x3a0 [amdgpu] [ 3.867009] gfx_v8_0_sw_init+0x1ad3/0x2360 [amdgpu] [ 3.867062] ? smu7_init+0xec/0x160 [amdgpu] [ 3.867109] amdgpu_device_init+0x112c/0x1dc0 [amdgpu] 'ring->me' might be set as 2 with 'amdgpu_gfx_kiq_init_ring', that would cause out of range for 'amdgpu_uvd_inst[2]'. v2: simplified with ring type Signed-off-by: Leo Liu Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c index 39ec6b8890a1..e74d620d9699 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c @@ -376,7 +376,7 @@ int amdgpu_fence_driver_start_ring(struct amdgpu_ring *ring, struct amdgpu_device *adev = ring->adev; uint64_t index; - if (ring != &adev->uvd.inst[ring->me].ring) { + if (ring->funcs->type != AMDGPU_RING_TYPE_UVD) { ring->fence_drv.cpu_addr = &adev->wb.wb[ring->fence_offs]; ring->fence_drv.gpu_addr = adev->wb.gpu_addr + (ring->fence_offs * 4); } else { -- cgit v1.2.3 From 62d5b8e33b774128c93baac35a4347a6cfb64434 Mon Sep 17 00:00:00 2001 From: James Zhu Date: Tue, 19 Jun 2018 13:44:04 -0400 Subject: drm/amdgpu:Support new VCN FW version naming convention Support new VCN FW version naming convention: [31, 28] for VEP interface major version if applicable [27, 24] for decode interface major version [23, 20] for encode interface major version [19, 12] for encode interface minor version [11, 0] for firmware revision Bit 20-23, it is encode major and non-zero for new naming convention. This field is part of version minor and DRM_DISABLED_FLAG in old naming convention. Since the latest version minor is 0x5B and DRM_DISABLED_FLAG is zero in old naming convention, this field is always zero so far. These four bits are used to tell which naming convention is present. Signed-off-by: James Zhu Reviewed-by: Fang, Peter Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_vcn.c | 33 +++++++++++++++++++++++++++------ 1 file changed, 27 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_vcn.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_vcn.c index 127e87b470ff..1b4ad9b2a755 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_vcn.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_vcn.c @@ -52,7 +52,7 @@ int amdgpu_vcn_sw_init(struct amdgpu_device *adev) unsigned long bo_size; const char *fw_name; const struct common_firmware_header *hdr; - unsigned version_major, version_minor, family_id; + unsigned char fw_check; int r; INIT_DELAYED_WORK(&adev->vcn.idle_work, amdgpu_vcn_idle_work_handler); @@ -83,12 +83,33 @@ int amdgpu_vcn_sw_init(struct amdgpu_device *adev) hdr = (const struct common_firmware_header *)adev->vcn.fw->data; adev->vcn.fw_version = le32_to_cpu(hdr->ucode_version); - family_id = le32_to_cpu(hdr->ucode_version) & 0xff; - version_major = (le32_to_cpu(hdr->ucode_version) >> 24) & 0xff; - version_minor = (le32_to_cpu(hdr->ucode_version) >> 8) & 0xff; - DRM_INFO("Found VCN firmware Version: %hu.%hu Family ID: %hu\n", - version_major, version_minor, family_id); + /* Bit 20-23, it is encode major and non-zero for new naming convention. + * This field is part of version minor and DRM_DISABLED_FLAG in old naming + * convention. Since the l:wq!atest version minor is 0x5B and DRM_DISABLED_FLAG + * is zero in old naming convention, this field is always zero so far. + * These four bits are used to tell which naming convention is present. + */ + fw_check = (le32_to_cpu(hdr->ucode_version) >> 20) & 0xf; + if (fw_check) { + unsigned int dec_ver, enc_major, enc_minor, vep, fw_rev; + + fw_rev = le32_to_cpu(hdr->ucode_version) & 0xfff; + enc_minor = (le32_to_cpu(hdr->ucode_version) >> 12) & 0xff; + enc_major = fw_check; + dec_ver = (le32_to_cpu(hdr->ucode_version) >> 24) & 0xf; + vep = (le32_to_cpu(hdr->ucode_version) >> 28) & 0xf; + DRM_INFO("Found VCN firmware Version ENC: %hu.%hu DEC: %hu VEP: %hu Revision: %hu\n", + enc_major, enc_minor, dec_ver, vep, fw_rev); + } else { + unsigned int version_major, version_minor, family_id; + + family_id = le32_to_cpu(hdr->ucode_version) & 0xff; + version_major = (le32_to_cpu(hdr->ucode_version) >> 24) & 0xff; + version_minor = (le32_to_cpu(hdr->ucode_version) >> 8) & 0xff; + DRM_INFO("Found VCN firmware Version: %hu.%hu Family ID: %hu\n", + version_major, version_minor, family_id); + } bo_size = AMDGPU_GPU_PAGE_ALIGN(le32_to_cpu(hdr->ucode_size_bytes) + 8) + AMDGPU_VCN_STACK_SIZE + AMDGPU_VCN_HEAP_SIZE -- cgit v1.2.3 From 4de9f38bb2cce3a4821ffb8a83d6b08f6e37d905 Mon Sep 17 00:00:00 2001 From: Shirish S Date: Tue, 26 Jun 2018 09:32:39 +0530 Subject: drm/amd/display: release spinlock before committing updates to stream MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Currently, amdgpu_do_flip() spinlocks crtc->dev->event_lock and releases it only after committing updates to the stream. dc_commit_updates_for_stream() should be moved out of spinlock for the below reasons: 1. event_lock is supposed to protect access to acrct->pflip_status _only_ 2. dc_commit_updates_for_stream() has potential sleep's and also its not appropriate to be in an atomic state for such long sequences of code. Signed-off-by: Shirish S Suggested-by: Andrey Grodzovsky Reviewed-by: Michel Dänzer Reviewed-by: Harry Wentland Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c index 689dbdf44bbf..3a8d6356afc2 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -3928,10 +3928,11 @@ static void amdgpu_dm_do_flip(struct drm_crtc *crtc, if (acrtc->base.state->event) prepare_flip_isr(acrtc); + spin_unlock_irqrestore(&crtc->dev->event_lock, flags); + surface_updates->surface = dc_stream_get_status(acrtc_state->stream)->plane_states[0]; surface_updates->flip_addr = &addr; - dc_commit_updates_for_stream(adev->dm.dc, surface_updates, 1, @@ -3944,9 +3945,6 @@ static void amdgpu_dm_do_flip(struct drm_crtc *crtc, __func__, addr.address.grph.addr.high_part, addr.address.grph.addr.low_part); - - - spin_unlock_irqrestore(&crtc->dev->event_lock, flags); } /* -- cgit v1.2.3 From d5b4885b1dff72ac670b518cfeaac719d768bd4d Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Thu, 26 Apr 2018 12:50:46 +0200 Subject: ARM64: dts: meson: disable sd-uhs modes on the libretech-cc There is a problem with the sd-uhs mode when doing a soft reboot. Switching back from 1.8v to 3.3v messes with the card, which no longer respond (timeout errors). According to the specification, we should perform a card reset (power cycling the card) but this is something we cannot control on this design. Then the only solution to restore the communication with the card is an "unplug-plug" which is not acceptable Until we find a solution, if any, disable the sd-uhs modes on this design. For the people using uhs at the moment, there will a performance drop as a result. Fixes: 3cde63ebc85c ("ARM64: dts: meson-gxl: libretech-cc: enable high speed modes") Signed-off-by: Jerome Brunet Cc: stable@vger.kernel.org Signed-off-by: Kevin Hilman --- arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts | 3 --- 1 file changed, 3 deletions(-) diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts index 3e3eb31748a3..f63bceb88caa 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts @@ -234,9 +234,6 @@ bus-width = <4>; cap-sd-highspeed; - sd-uhs-sdr12; - sd-uhs-sdr25; - sd-uhs-sdr50; max-frequency = <100000000>; disable-wp; -- cgit v1.2.3 From e490520c902e06e837e07948f026e7949bb16007 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Mon, 4 Jun 2018 15:23:09 -0700 Subject: ARM64: dts: meson: fix register ranges for SD/eMMC Based on updated information from Amlogic, correct the register range for the SD/eMMC blocks to the right size. Reported-by: Yixun Lan Tested-by: Yixun Lan Signed-off-by: Kevin Hilman --- arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 4 ++-- arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 6 +++--- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi index fee87737a201..67d7115e4eff 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi @@ -132,7 +132,7 @@ sd_emmc_b: sd@5000 { compatible = "amlogic,meson-axg-mmc"; - reg = <0x0 0x5000 0x0 0x2000>; + reg = <0x0 0x5000 0x0 0x800>; interrupts = ; status = "disabled"; clocks = <&clkc CLKID_SD_EMMC_B>, @@ -144,7 +144,7 @@ sd_emmc_c: mmc@7000 { compatible = "amlogic,meson-axg-mmc"; - reg = <0x0 0x7000 0x0 0x2000>; + reg = <0x0 0x7000 0x0 0x800>; interrupts = ; status = "disabled"; clocks = <&clkc CLKID_SD_EMMC_C>, diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi index 3c31e21cbed7..b003f324ca31 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi @@ -457,21 +457,21 @@ sd_emmc_a: mmc@70000 { compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc"; - reg = <0x0 0x70000 0x0 0x2000>; + reg = <0x0 0x70000 0x0 0x800>; interrupts = ; status = "disabled"; }; sd_emmc_b: mmc@72000 { compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc"; - reg = <0x0 0x72000 0x0 0x2000>; + reg = <0x0 0x72000 0x0 0x800>; interrupts = ; status = "disabled"; }; sd_emmc_c: mmc@74000 { compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc"; - reg = <0x0 0x74000 0x0 0x2000>; + reg = <0x0 0x74000 0x0 0x800>; interrupts = ; status = "disabled"; }; -- cgit v1.2.3 From d511b3e4087eedbe11c7496c396432b8b7c2d7d9 Mon Sep 17 00:00:00 2001 From: Neil Armstrong Date: Tue, 5 Jun 2018 10:52:23 +0200 Subject: ARM64: dts: meson-gxl-s905x-p212: Add phy-supply for usb0 Like LibreTech-CC, the USB0 needs the 5V regulator to be enabled to power the devices on the P212 Reference Design based boards. Fixes: b9f07cb4f41f ("ARM64: dts: meson-gxl-s905x-p212: enable the USB controller") Signed-off-by: Neil Armstrong Acked-by: Martin Blumenstingl Signed-off-by: Kevin Hilman --- arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi index 0cfd701809de..a1b31013ab6e 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi @@ -189,3 +189,10 @@ &usb0 { status = "okay"; }; + +&usb2_phy0 { + /* + * HDMI_5V is also used as supply for the USB VBUS. + */ + phy-supply = <&hdmi_5v>; +}; -- cgit v1.2.3 From 48e21ded0432ee1e2359d4143d7a6925cefee1b5 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Thu, 7 Jun 2018 13:51:01 -0700 Subject: ARM64: dts: meson-gx: fix ATF reserved memory region Vendor firmware/uboot has different reserved regions depending on firmware version, but current codebase reserves the same regions on GXL and GXBB, so move the additional reserved memory region to common .dtsi. Found when putting a recent vendor u-boot on meson-gxbb-p200. Suggested-by: Neil Armstrong Cc: stable@vger.kernel.org Signed-off-by: Kevin Hilman --- arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 6 ++++++ arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 8 -------- 2 files changed, 6 insertions(+), 8 deletions(-) diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi index b003f324ca31..b8dc4dbb391b 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi @@ -35,6 +35,12 @@ no-map; }; + /* Alternate 3 MiB reserved for ARM Trusted Firmware (BL31) */ + secmon_reserved_alt: secmon@5000000 { + reg = <0x0 0x05000000 0x0 0x300000>; + no-map; + }; + linux,cma { compatible = "shared-dma-pool"; reusable; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi index 27538eea547b..c87a80e9bcc6 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi @@ -13,14 +13,6 @@ / { compatible = "amlogic,meson-gxl"; - reserved-memory { - /* Alternate 3 MiB reserved for ARM Trusted Firmware (BL31) */ - secmon_reserved_alt: secmon@5000000 { - reg = <0x0 0x05000000 0x0 0x300000>; - no-map; - }; - }; - soc { usb0: usb@c9000000 { status = "disabled"; -- cgit v1.2.3 From 6d28d577510f1a51f7ffbe830fdbf42077e0058b Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Mon, 25 Jun 2018 14:56:53 +0200 Subject: ARM64: dts: meson-axg: fix ethernet stability issue Like the odroid-c2 and wetek, the s400 uses the RTL8211F and seems to suffer from the kind of stability issue. Doing an iperf3 download test, we can see a significant number of LPI interrupts on the tx path. After a short while (5 to 15 seconds), the network connection dies. If using rootfs over NFS, the connection may also break during the boot sequence. We still don't have a real explanation for this problem so let's disable EEE once again. Fixes: f6f6ac914b82 ("ARM64: dts: meson-axg: enable ethernet for A113D S400 board") Signed-off-by: Jerome Brunet Reviewed-by: Neil Armstrong Signed-off-by: Kevin Hilman --- arch/arm64/boot/dts/amlogic/meson-axg-s400.dts | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts index 4b3331fbfe39..dff9b15eb3c0 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts +++ b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts @@ -66,9 +66,22 @@ ðmac { status = "okay"; - phy-mode = "rgmii"; pinctrl-0 = <ð_rgmii_y_pins>; pinctrl-names = "default"; + phy-handle = <ð_phy0>; + phy-mode = "rgmii"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + eth_phy0: ethernet-phy@0 { + /* Realtek RTL8211F (0x001cc916) */ + reg = <0>; + eee-broken-1000t; + }; + }; }; &uart_A { -- cgit v1.2.3 From 1c38f4afd5d40234b67635b3c608a4093be04b96 Mon Sep 17 00:00:00 2001 From: Martin Blumenstingl Date: Sat, 23 Jun 2018 17:00:56 +0200 Subject: ARM64: dts: meson-gxl: fix Mali GPU compatible string meson-gxl-mali.dtsi is only used on GXL SoCs. Thus it should use the GXL specific compatible string instead of the GXBB one. For now this is purely cosmetic since the (out-of-tree) lima driver for this GPU currently uses the "arm,mali-450" match instead of the SoC specific one. However, update the .dts to match the documentation since this driver behavior might change in the future. Signed-off-by: Martin Blumenstingl Acked-by: Neil Armstrong Signed-off-by: Kevin Hilman --- arch/arm64/boot/dts/amlogic/meson-gxl-mali.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-mali.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-mali.dtsi index eb327664a4d8..6aaafff674f9 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-mali.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-mali.dtsi @@ -6,7 +6,7 @@ &apb { mali: gpu@c0000 { - compatible = "amlogic,meson-gxbb-mali", "arm,mali-450"; + compatible = "amlogic,meson-gxl-mali", "arm,mali-450"; reg = <0x0 0xc0000 0x0 0x40000>; interrupts = , , -- cgit v1.2.3 From 877f919e192a09e77962a13d7165783027dee5fd Mon Sep 17 00:00:00 2001 From: Chunyu Hu Date: Sun, 10 Jun 2018 03:51:24 +0800 Subject: proc: add proc_seq_release kmemleak reported some memory leak on reading proc files. After adding some debug lines, find that proc_seq_fops is using seq_release as release handler, which won't handle the free of 'private' field of seq_file, while in fact the open handler proc_seq_open could create the private data with __seq_open_private when state_size is greater than zero. So after reading files created with proc_create_seq_private, such as /proc/timer_list and /proc/vmallocinfo, the private mem of a seq_file is not freed. Fix it by adding the paired proc_seq_release as the default release handler of proc_seq_ops instead of seq_release. Fixes: 44414d82cfe0 ("proc: introduce proc_create_seq_private") Reviewed-by: Christoph Hellwig CC: Christoph Hellwig Signed-off-by: Chunyu Hu Signed-off-by: Al Viro --- fs/proc/generic.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/fs/proc/generic.c b/fs/proc/generic.c index 6ac1c92997ea..bb1c1625b158 100644 --- a/fs/proc/generic.c +++ b/fs/proc/generic.c @@ -564,11 +564,20 @@ static int proc_seq_open(struct inode *inode, struct file *file) return seq_open(file, de->seq_ops); } +static int proc_seq_release(struct inode *inode, struct file *file) +{ + struct proc_dir_entry *de = PDE(inode); + + if (de->state_size) + return seq_release_private(inode, file); + return seq_release(inode, file); +} + static const struct file_operations proc_seq_fops = { .open = proc_seq_open, .read = seq_read, .llseek = seq_lseek, - .release = seq_release, + .release = proc_seq_release, }; struct proc_dir_entry *proc_create_seq_private(const char *name, umode_t mode, -- cgit v1.2.3 From 82be2ab159a3a0ae4024b946a31f12b221f6c8ff Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Wed, 27 Jun 2018 17:47:37 +0800 Subject: hinic: reset irq affinity before freeing irq Following warning is seen when rmmod hinic. This is because affinity value is not reset before calling free_irq(). This patch fixes it. [ 55.181232] WARNING: CPU: 38 PID: 19589 at kernel/irq/manage.c:1608 __free_irq+0x2aa/0x2c0 Fixes: 352f58b0d9f2 ("net-next/hinic: Set Rxq irq to specific cpu for NUMA") Signed-off-by: Wei Yongjun Signed-off-by: David S. Miller --- drivers/net/ethernet/huawei/hinic/hinic_rx.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/huawei/hinic/hinic_rx.c b/drivers/net/ethernet/huawei/hinic/hinic_rx.c index e2e5cdc7119c..4c0f7eda1166 100644 --- a/drivers/net/ethernet/huawei/hinic/hinic_rx.c +++ b/drivers/net/ethernet/huawei/hinic/hinic_rx.c @@ -439,6 +439,7 @@ static void rx_free_irq(struct hinic_rxq *rxq) { struct hinic_rq *rq = rxq->rq; + irq_set_affinity_hint(rq->irq, NULL); free_irq(rq->irq, rxq); rx_del_napi(rxq); } -- cgit v1.2.3 From 88e85a7daf8e21f2d6cb054374d480c540725cde Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Tue, 26 Jun 2018 12:55:35 +0900 Subject: bpfilter: check compiler capability in Kconfig With the brand-new syntax extension of Kconfig, we can directly check the compiler capability in the configuration phase. If the cc-can-link.sh fails, the BPFILTER_UMH is automatically hidden by the dependency. I also deleted 'default n', which is no-op. Signed-off-by: Masahiro Yamada Acked-by: Daniel Borkmann Acked-by: Alexei Starovoitov Signed-off-by: David S. Miller --- Makefile | 5 ----- net/Makefile | 4 ---- net/bpfilter/Kconfig | 2 +- scripts/cc-can-link.sh | 2 +- 4 files changed, 2 insertions(+), 11 deletions(-) diff --git a/Makefile b/Makefile index c9132594860b..e1bd4c3627bc 100644 --- a/Makefile +++ b/Makefile @@ -507,11 +507,6 @@ ifeq ($(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-goto.sh $(CC) $(KBUILD_CFLA KBUILD_AFLAGS += -DCC_HAVE_ASM_GOTO endif -ifeq ($(shell $(CONFIG_SHELL) $(srctree)/scripts/cc-can-link.sh $(CC)), y) - CC_CAN_LINK := y - export CC_CAN_LINK -endif - # The expansion should be delayed until arch/$(SRCARCH)/Makefile is included. # Some architectures define CROSS_COMPILE in arch/$(SRCARCH)/Makefile. # CC_VERSION_TEXT is referenced from Kconfig (so it needs export), diff --git a/net/Makefile b/net/Makefile index 13ec0d5415c7..bdaf53925acd 100644 --- a/net/Makefile +++ b/net/Makefile @@ -20,11 +20,7 @@ obj-$(CONFIG_TLS) += tls/ obj-$(CONFIG_XFRM) += xfrm/ obj-$(CONFIG_UNIX) += unix/ obj-$(CONFIG_NET) += ipv6/ -ifneq ($(CC_CAN_LINK),y) -$(warning CC cannot link executables. Skipping bpfilter.) -else obj-$(CONFIG_BPFILTER) += bpfilter/ -endif obj-$(CONFIG_PACKET) += packet/ obj-$(CONFIG_NET_KEY) += key/ obj-$(CONFIG_BRIDGE) += bridge/ diff --git a/net/bpfilter/Kconfig b/net/bpfilter/Kconfig index a948b072c28f..76deb6615883 100644 --- a/net/bpfilter/Kconfig +++ b/net/bpfilter/Kconfig @@ -1,6 +1,5 @@ menuconfig BPFILTER bool "BPF based packet filtering framework (BPFILTER)" - default n depends on NET && BPF && INET help This builds experimental bpfilter framework that is aiming to @@ -9,6 +8,7 @@ menuconfig BPFILTER if BPFILTER config BPFILTER_UMH tristate "bpfilter kernel module with user mode helper" + depends on $(success,$(srctree)/scripts/cc-can-link.sh $(CC)) default m help This builds bpfilter kernel module with embedded user mode helper diff --git a/scripts/cc-can-link.sh b/scripts/cc-can-link.sh index 208eb2825dab..6efcead31989 100755 --- a/scripts/cc-can-link.sh +++ b/scripts/cc-can-link.sh @@ -1,7 +1,7 @@ #!/bin/sh # SPDX-License-Identifier: GPL-2.0 -cat << "END" | $@ -x c - -o /dev/null >/dev/null 2>&1 && echo "y" +cat << "END" | $@ -x c - -o /dev/null >/dev/null 2>&1 #include int main(void) { -- cgit v1.2.3 From fec9d3b1dc4c481f20f5d2f5aef3ad1cb7504186 Mon Sep 17 00:00:00 2001 From: Alexandre Belloni Date: Tue, 26 Jun 2018 10:44:01 +0200 Subject: net: macb: initialize bp->queues[0].bp for at91rm9200 The macb driver currently crashes on at91rm9200 with the following trace: Unable to handle kernel NULL pointer dereference at virtual address 00000014 [...] [] (macb_rx_desc) from [] (at91ether_open+0x2e8/0x3f8) [] (at91ether_open) from [] (__dev_open+0x120/0x13c) [] (__dev_open) from [] (__dev_change_flags+0x17c/0x1a8) [] (__dev_change_flags) from [] (dev_change_flags+0x18/0x4c) [] (dev_change_flags) from [] (ip_auto_config+0x220/0x10b0) [] (ip_auto_config) from [] (do_one_initcall+0x78/0x18c) [] (do_one_initcall) from [] (kernel_init_freeable+0x184/0x1c4) [] (kernel_init_freeable) from [] (kernel_init+0x8/0xe8) [] (kernel_init) from [] (ret_from_fork+0x14/0x34) Solve that by initializing bp->queues[0].bp in at91ether_init (as is done in macb_init). Fixes: ae1f2a56d273 ("net: macb: Added support for many RX queues") Signed-off-by: Alexandre Belloni Acked-by: Nicolas Ferre Signed-off-by: David S. Miller --- drivers/net/ethernet/cadence/macb_main.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c index 3e93df5d4e3b..96cc03a6d942 100644 --- a/drivers/net/ethernet/cadence/macb_main.c +++ b/drivers/net/ethernet/cadence/macb_main.c @@ -3726,6 +3726,8 @@ static int at91ether_init(struct platform_device *pdev) int err; u32 reg; + bp->queues[0].bp = bp; + dev->netdev_ops = &at91ether_netdev_ops; dev->ethtool_ops = &macb_ethtool_ops; -- cgit v1.2.3 From ad088ec480768850db019a5cc543685e868a513d Mon Sep 17 00:00:00 2001 From: Jesper Dangaard Brouer Date: Tue, 26 Jun 2018 17:39:48 +0200 Subject: ixgbe: split XDP_TX tail and XDP_REDIRECT map flushing The driver was combining the XDP_TX tail flush and XDP_REDIRECT map flushing (xdp_do_flush_map). This is suboptimal, these two flush operations should be kept separate. Fixes: 11393cc9b9be ("xdp: Add batching support to redirect map") Signed-off-by: Jesper Dangaard Brouer Signed-off-by: David S. Miller --- drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 24 ++++++++++++++---------- 1 file changed, 14 insertions(+), 10 deletions(-) diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index 3e87dbbc9024..62e57b05a0ae 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -2186,9 +2186,10 @@ static struct sk_buff *ixgbe_build_skb(struct ixgbe_ring *rx_ring, return skb; } -#define IXGBE_XDP_PASS 0 -#define IXGBE_XDP_CONSUMED 1 -#define IXGBE_XDP_TX 2 +#define IXGBE_XDP_PASS 0 +#define IXGBE_XDP_CONSUMED BIT(0) +#define IXGBE_XDP_TX BIT(1) +#define IXGBE_XDP_REDIR BIT(2) static int ixgbe_xmit_xdp_ring(struct ixgbe_adapter *adapter, struct xdp_frame *xdpf); @@ -2225,7 +2226,7 @@ static struct sk_buff *ixgbe_run_xdp(struct ixgbe_adapter *adapter, case XDP_REDIRECT: err = xdp_do_redirect(adapter->netdev, xdp, xdp_prog); if (!err) - result = IXGBE_XDP_TX; + result = IXGBE_XDP_REDIR; else result = IXGBE_XDP_CONSUMED; break; @@ -2285,7 +2286,7 @@ static int ixgbe_clean_rx_irq(struct ixgbe_q_vector *q_vector, unsigned int mss = 0; #endif /* IXGBE_FCOE */ u16 cleaned_count = ixgbe_desc_unused(rx_ring); - bool xdp_xmit = false; + unsigned int xdp_xmit = 0; struct xdp_buff xdp; xdp.rxq = &rx_ring->xdp_rxq; @@ -2328,8 +2329,10 @@ static int ixgbe_clean_rx_irq(struct ixgbe_q_vector *q_vector, } if (IS_ERR(skb)) { - if (PTR_ERR(skb) == -IXGBE_XDP_TX) { - xdp_xmit = true; + unsigned int xdp_res = -PTR_ERR(skb); + + if (xdp_res & (IXGBE_XDP_TX | IXGBE_XDP_REDIR)) { + xdp_xmit |= xdp_res; ixgbe_rx_buffer_flip(rx_ring, rx_buffer, size); } else { rx_buffer->pagecnt_bias++; @@ -2401,7 +2404,10 @@ static int ixgbe_clean_rx_irq(struct ixgbe_q_vector *q_vector, total_rx_packets++; } - if (xdp_xmit) { + if (xdp_xmit & IXGBE_XDP_REDIR) + xdp_do_flush_map(); + + if (xdp_xmit & IXGBE_XDP_TX) { struct ixgbe_ring *ring = adapter->xdp_ring[smp_processor_id()]; /* Force memory writes to complete before letting h/w @@ -2409,8 +2415,6 @@ static int ixgbe_clean_rx_irq(struct ixgbe_q_vector *q_vector, */ wmb(); writel(ring->next_to_use, ring->tail); - - xdp_do_flush_map(); } u64_stats_update_begin(&rx_ring->syncp); -- cgit v1.2.3 From 2e6893123830d04edc366e0ce59d46e622e140c1 Mon Sep 17 00:00:00 2001 From: Jesper Dangaard Brouer Date: Tue, 26 Jun 2018 17:39:53 +0200 Subject: i40e: split XDP_TX tail and XDP_REDIRECT map flushing MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The driver was combining the XDP_TX tail flush and XDP_REDIRECT map flushing (xdp_do_flush_map). This is suboptimal, these two flush operations should be kept separate. It looks like the mistake was copy-pasted from ixgbe. Fixes: d9314c474d4f ("i40e: add support for XDP_REDIRECT") Signed-off-by: Jesper Dangaard Brouer Acked-by: Björn Töpel Signed-off-by: David S. Miller --- drivers/net/ethernet/intel/i40e/i40e_txrx.c | 24 +++++++++++++++--------- 1 file changed, 15 insertions(+), 9 deletions(-) diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.c b/drivers/net/ethernet/intel/i40e/i40e_txrx.c index ed6dbcfd4e96..b151ae316546 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_txrx.c +++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.c @@ -2199,9 +2199,10 @@ static bool i40e_is_non_eop(struct i40e_ring *rx_ring, return true; } -#define I40E_XDP_PASS 0 -#define I40E_XDP_CONSUMED 1 -#define I40E_XDP_TX 2 +#define I40E_XDP_PASS 0 +#define I40E_XDP_CONSUMED BIT(0) +#define I40E_XDP_TX BIT(1) +#define I40E_XDP_REDIR BIT(2) static int i40e_xmit_xdp_ring(struct xdp_frame *xdpf, struct i40e_ring *xdp_ring); @@ -2248,7 +2249,7 @@ static struct sk_buff *i40e_run_xdp(struct i40e_ring *rx_ring, break; case XDP_REDIRECT: err = xdp_do_redirect(rx_ring->netdev, xdp, xdp_prog); - result = !err ? I40E_XDP_TX : I40E_XDP_CONSUMED; + result = !err ? I40E_XDP_REDIR : I40E_XDP_CONSUMED; break; default: bpf_warn_invalid_xdp_action(act); @@ -2311,7 +2312,8 @@ static int i40e_clean_rx_irq(struct i40e_ring *rx_ring, int budget) unsigned int total_rx_bytes = 0, total_rx_packets = 0; struct sk_buff *skb = rx_ring->skb; u16 cleaned_count = I40E_DESC_UNUSED(rx_ring); - bool failure = false, xdp_xmit = false; + unsigned int xdp_xmit = 0; + bool failure = false; struct xdp_buff xdp; xdp.rxq = &rx_ring->xdp_rxq; @@ -2372,8 +2374,10 @@ static int i40e_clean_rx_irq(struct i40e_ring *rx_ring, int budget) } if (IS_ERR(skb)) { - if (PTR_ERR(skb) == -I40E_XDP_TX) { - xdp_xmit = true; + unsigned int xdp_res = -PTR_ERR(skb); + + if (xdp_res & (I40E_XDP_TX | I40E_XDP_REDIR)) { + xdp_xmit |= xdp_res; i40e_rx_buffer_flip(rx_ring, rx_buffer, size); } else { rx_buffer->pagecnt_bias++; @@ -2427,12 +2431,14 @@ static int i40e_clean_rx_irq(struct i40e_ring *rx_ring, int budget) total_rx_packets++; } - if (xdp_xmit) { + if (xdp_xmit & I40E_XDP_REDIR) + xdp_do_flush_map(); + + if (xdp_xmit & I40E_XDP_TX) { struct i40e_ring *xdp_ring = rx_ring->vsi->xdp_rings[rx_ring->queue_index]; i40e_xdp_ring_update_tail(xdp_ring); - xdp_do_flush_map(); } rx_ring->skb = skb; -- cgit v1.2.3 From 2471c75efed32529698c26da499954f0253cb401 Mon Sep 17 00:00:00 2001 From: Jesper Dangaard Brouer Date: Tue, 26 Jun 2018 17:39:58 +0200 Subject: virtio_net: split XDP_TX kick and XDP_REDIRECT map flushing The driver was combining XDP_TX virtqueue_kick and XDP_REDIRECT map flushing (xdp_do_flush_map). This is suboptimal, these two flush operations should be kept separate. The suboptimal behavior was introduced in commit 9267c430c6b6 ("virtio-net: add missing virtqueue kick when flushing packets"). Fixes: 9267c430c6b6 ("virtio-net: add missing virtqueue kick when flushing packets") Signed-off-by: Jesper Dangaard Brouer Acked-by: Jason Wang Signed-off-by: David S. Miller --- drivers/net/virtio_net.c | 30 +++++++++++++++++++----------- 1 file changed, 19 insertions(+), 11 deletions(-) diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index b6c9a2af3732..53085c63277b 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -53,6 +53,10 @@ module_param(napi_tx, bool, 0644); /* Amount of XDP headroom to prepend to packets for use by xdp_adjust_head */ #define VIRTIO_XDP_HEADROOM 256 +/* Separating two types of XDP xmit */ +#define VIRTIO_XDP_TX BIT(0) +#define VIRTIO_XDP_REDIR BIT(1) + /* RX packet size EWMA. The average packet size is used to determine the packet * buffer size when refilling RX rings. As the entire RX ring may be refilled * at once, the weight is chosen so that the EWMA will be insensitive to short- @@ -582,7 +586,7 @@ static struct sk_buff *receive_small(struct net_device *dev, struct receive_queue *rq, void *buf, void *ctx, unsigned int len, - bool *xdp_xmit) + unsigned int *xdp_xmit) { struct sk_buff *skb; struct bpf_prog *xdp_prog; @@ -654,14 +658,14 @@ static struct sk_buff *receive_small(struct net_device *dev, trace_xdp_exception(vi->dev, xdp_prog, act); goto err_xdp; } - *xdp_xmit = true; + *xdp_xmit |= VIRTIO_XDP_TX; rcu_read_unlock(); goto xdp_xmit; case XDP_REDIRECT: err = xdp_do_redirect(dev, &xdp, xdp_prog); if (err) goto err_xdp; - *xdp_xmit = true; + *xdp_xmit |= VIRTIO_XDP_REDIR; rcu_read_unlock(); goto xdp_xmit; default: @@ -723,7 +727,7 @@ static struct sk_buff *receive_mergeable(struct net_device *dev, void *buf, void *ctx, unsigned int len, - bool *xdp_xmit) + unsigned int *xdp_xmit) { struct virtio_net_hdr_mrg_rxbuf *hdr = buf; u16 num_buf = virtio16_to_cpu(vi->vdev, hdr->num_buffers); @@ -818,7 +822,7 @@ static struct sk_buff *receive_mergeable(struct net_device *dev, put_page(xdp_page); goto err_xdp; } - *xdp_xmit = true; + *xdp_xmit |= VIRTIO_XDP_TX; if (unlikely(xdp_page != page)) put_page(page); rcu_read_unlock(); @@ -830,7 +834,7 @@ static struct sk_buff *receive_mergeable(struct net_device *dev, put_page(xdp_page); goto err_xdp; } - *xdp_xmit = true; + *xdp_xmit |= VIRTIO_XDP_REDIR; if (unlikely(xdp_page != page)) put_page(page); rcu_read_unlock(); @@ -939,7 +943,8 @@ xdp_xmit: } static int receive_buf(struct virtnet_info *vi, struct receive_queue *rq, - void *buf, unsigned int len, void **ctx, bool *xdp_xmit) + void *buf, unsigned int len, void **ctx, + unsigned int *xdp_xmit) { struct net_device *dev = vi->dev; struct sk_buff *skb; @@ -1232,7 +1237,8 @@ static void refill_work(struct work_struct *work) } } -static int virtnet_receive(struct receive_queue *rq, int budget, bool *xdp_xmit) +static int virtnet_receive(struct receive_queue *rq, int budget, + unsigned int *xdp_xmit) { struct virtnet_info *vi = rq->vq->vdev->priv; unsigned int len, received = 0, bytes = 0; @@ -1321,7 +1327,7 @@ static int virtnet_poll(struct napi_struct *napi, int budget) struct virtnet_info *vi = rq->vq->vdev->priv; struct send_queue *sq; unsigned int received, qp; - bool xdp_xmit = false; + unsigned int xdp_xmit = 0; virtnet_poll_cleantx(rq); @@ -1331,12 +1337,14 @@ static int virtnet_poll(struct napi_struct *napi, int budget) if (received < budget) virtqueue_napi_complete(napi, rq->vq, received); - if (xdp_xmit) { + if (xdp_xmit & VIRTIO_XDP_REDIR) + xdp_do_flush_map(); + + if (xdp_xmit & VIRTIO_XDP_TX) { qp = vi->curr_queue_pairs - vi->xdp_queue_pairs + smp_processor_id(); sq = &vi->sq[qp]; virtqueue_kick(sq->vq); - xdp_do_flush_map(); } return received; -- cgit v1.2.3 From 933e671f8cff87552d4d26cf3874633b11ae78ba Mon Sep 17 00:00:00 2001 From: Shuah Khan Date: Tue, 26 Jun 2018 12:22:28 -0600 Subject: selftests/net: Fix permissions for fib_tests.sh MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit fib_tests.sh became non-executable at some point. This is what happens: selftests: net: fib_tests.sh: Warning: file fib_tests.sh is not executable, correct this. not ok 1..11 selftests: net: fib_tests.sh [FAIL] Fixes: d69faad76584 ("selftests: fib_tests: Add prefix route tests with metric") Signed-off-by: Daniel Díaz Signed-off-by: David S. Miller --- tools/testing/selftests/net/fib_tests.sh | 0 1 file changed, 0 insertions(+), 0 deletions(-) mode change 100644 => 100755 tools/testing/selftests/net/fib_tests.sh diff --git a/tools/testing/selftests/net/fib_tests.sh b/tools/testing/selftests/net/fib_tests.sh old mode 100644 new mode 100755 -- cgit v1.2.3 From 6f7de19ed3d4d3526ca5eca428009f97cf969c2f Mon Sep 17 00:00:00 2001 From: Qu Wenruo Date: Wed, 27 Jun 2018 18:19:55 +0800 Subject: btrfs: quota: Set rescan progress to (u64)-1 if we hit last leaf Commit ff3d27a048d9 ("btrfs: qgroup: Finish rescan when hit the last leaf of extent tree") added a new exit for rescan finish. However after finishing quota rescan, we set fs_info->qgroup_rescan_progress to (u64)-1 before we exit through the original exit path. While we missed that assignment of (u64)-1 in the new exit path. The end result is, the quota status item doesn't have the same value. (-1 vs the last bytenr + 1) Although it doesn't affect quota accounting, it's still better to keep the original behavior. Reported-by: Misono Tomohiro Fixes: ff3d27a048d9 ("btrfs: qgroup: Finish rescan when hit the last leaf of extent tree") Signed-off-by: Qu Wenruo Reviewed-by: Misono Tomohiro Signed-off-by: David Sterba --- fs/btrfs/qgroup.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/fs/btrfs/qgroup.c b/fs/btrfs/qgroup.c index 1874a6d2e6f5..99f2b9ce0f15 100644 --- a/fs/btrfs/qgroup.c +++ b/fs/btrfs/qgroup.c @@ -2680,8 +2680,10 @@ out: free_extent_buffer(scratch_leaf); } - if (done && !ret) + if (done && !ret) { ret = 1; + fs_info->qgroup_rescan_progress.objectid = (u64)-1; + } return ret; } -- cgit v1.2.3 From 717beb96d969561cff53aad2f09547db20ee6ffd Mon Sep 17 00:00:00 2001 From: Chris Mason Date: Mon, 25 Jun 2018 10:03:41 -0700 Subject: Btrfs: fix regression in btrfs_page_mkwrite() from vm_fault_t conversion The vm_fault_t conversion commit introduced a ret2 variable for tracking the integer return values from internal btrfs functions. It was sometimes returning VM_FAULT_LOCKED for pages that were actually invalid and had been removed from the radix. Something like this: ret2 = btrfs_delalloc_reserve_space() // returns zero on success lock_page(page) if (page->mapping != inode->i_mapping) goto out_unlock; ... out_unlock: if (!ret2) { ... return VM_FAULT_LOCKED; } This ends up triggering this WARNING in btrfs_destroy_inode() WARN_ON(BTRFS_I(inode)->block_rsv.size); xfstests generic/095 was able to reliably reproduce the errors. Since out_unlock: is only used for errors, this fix moves it below the if (!ret2) check we use to return VM_FAULT_LOCKED for success. Fixes: a528a2415087 (btrfs: change return type of btrfs_page_mkwrite to vm_fault_t) Signed-off-by: Chris Mason Reviewed-by: David Sterba Signed-off-by: David Sterba --- fs/btrfs/inode.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index a6bf9e2ff68f..f21f4223d03b 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -9005,13 +9005,14 @@ again: unlock_extent_cached(io_tree, page_start, page_end, &cached_state); -out_unlock: if (!ret2) { btrfs_delalloc_release_extents(BTRFS_I(inode), PAGE_SIZE, true); sb_end_pagefault(inode->i_sb); extent_changeset_free(data_reserved); return VM_FAULT_LOCKED; } + +out_unlock: unlock_page(page); out: btrfs_delalloc_release_extents(BTRFS_I(inode), PAGE_SIZE, (ret != 0)); -- cgit v1.2.3 From e4e7ede739f7fb468686dfffa2d1e35dca35bacd Mon Sep 17 00:00:00 2001 From: Filipe Manana Date: Wed, 27 Jun 2018 00:43:15 +0100 Subject: Btrfs: fix mount failure when qgroup rescan is in progress If a power failure happens while the qgroup rescan kthread is running, the next mount operation will always fail. This is because of a recent regression that makes qgroup_rescan_init() incorrectly return -EINVAL when we are mounting the filesystem (through btrfs_read_qgroup_config()). This causes the -EINVAL error to be returned regardless of any qgroup flags being set instead of returning the error only when neither of the flags BTRFS_QGROUP_STATUS_FLAG_RESCAN nor BTRFS_QGROUP_STATUS_FLAG_ON are set. A test case for fstests follows up soon. Fixes: 9593bf49675e ("btrfs: qgroup: show more meaningful qgroup_rescan_init error message") Signed-off-by: Filipe Manana Reviewed-by: Qu Wenruo Signed-off-by: David Sterba --- fs/btrfs/qgroup.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) diff --git a/fs/btrfs/qgroup.c b/fs/btrfs/qgroup.c index 99f2b9ce0f15..c25dc47210a3 100644 --- a/fs/btrfs/qgroup.c +++ b/fs/btrfs/qgroup.c @@ -2786,13 +2786,20 @@ qgroup_rescan_init(struct btrfs_fs_info *fs_info, u64 progress_objectid, if (!init_flags) { /* we're resuming qgroup rescan at mount time */ - if (!(fs_info->qgroup_flags & BTRFS_QGROUP_STATUS_FLAG_RESCAN)) + if (!(fs_info->qgroup_flags & + BTRFS_QGROUP_STATUS_FLAG_RESCAN)) { btrfs_warn(fs_info, "qgroup rescan init failed, qgroup is not enabled"); - else if (!(fs_info->qgroup_flags & BTRFS_QGROUP_STATUS_FLAG_ON)) + ret = -EINVAL; + } else if (!(fs_info->qgroup_flags & + BTRFS_QGROUP_STATUS_FLAG_ON)) { btrfs_warn(fs_info, "qgroup rescan init failed, qgroup rescan is not queued"); - return -EINVAL; + ret = -EINVAL; + } + + if (ret) + return ret; } mutex_lock(&fs_info->qgroup_rescan_lock); -- cgit v1.2.3 From 210d0797c97d0e8f3b1a932a0dc143f4c57008a3 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Thu, 28 Jun 2018 13:59:25 +0200 Subject: swiotlb: export swiotlb_dma_ops For architectures that do not use per-device dma ops we need to export the dma_map_ops structure returned from get_arch_dma_ops(). Fixes: 10314e09 ("riscv: add swiotlb support") Signed-off-by: Christoph Hellwig Reported-by: Andreas Schwab --- kernel/dma/swiotlb.c | 1 + 1 file changed, 1 insertion(+) diff --git a/kernel/dma/swiotlb.c b/kernel/dma/swiotlb.c index 04b68d9dffac..904541055792 100644 --- a/kernel/dma/swiotlb.c +++ b/kernel/dma/swiotlb.c @@ -1085,3 +1085,4 @@ const struct dma_map_ops swiotlb_dma_ops = { .unmap_page = swiotlb_unmap_page, .dma_supported = dma_direct_supported, }; +EXPORT_SYMBOL(swiotlb_dma_ops); -- cgit v1.2.3 From 3d63b7e4ae0dc5e02d28ddd2fa1f945defc68d81 Mon Sep 17 00:00:00 2001 From: Tetsuo Handa Date: Sat, 26 May 2018 09:53:13 +0900 Subject: n_tty: Fix stall at n_tty_receive_char_special(). syzbot is reporting stalls at n_tty_receive_char_special() [1]. This is because comparison is not working as expected since ldata->read_head can change at any moment. Mitigate this by explicitly masking with buffer size when checking condition for "while" loops. [1] https://syzkaller.appspot.com/bug?id=3d7481a346958d9469bebbeb0537d5f056bdd6e8 Signed-off-by: Tetsuo Handa Reported-by: syzbot Fixes: bc5a5e3f45d04784 ("n_tty: Don't wrap input buffer indices at buffer size") Cc: stable Cc: Peter Hurley Signed-off-by: Greg Kroah-Hartman --- drivers/tty/n_tty.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index cbe98bc2b998..b279f8730e04 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -124,6 +124,8 @@ struct n_tty_data { struct mutex output_lock; }; +#define MASK(x) ((x) & (N_TTY_BUF_SIZE - 1)) + static inline size_t read_cnt(struct n_tty_data *ldata) { return ldata->read_head - ldata->read_tail; @@ -978,14 +980,15 @@ static void eraser(unsigned char c, struct tty_struct *tty) } seen_alnums = 0; - while (ldata->read_head != ldata->canon_head) { + while (MASK(ldata->read_head) != MASK(ldata->canon_head)) { head = ldata->read_head; /* erase a single possibly multibyte character */ do { head--; c = read_buf(ldata, head); - } while (is_continuation(c, tty) && head != ldata->canon_head); + } while (is_continuation(c, tty) && + MASK(head) != MASK(ldata->canon_head)); /* do not partially erase */ if (is_continuation(c, tty)) @@ -1027,7 +1030,7 @@ static void eraser(unsigned char c, struct tty_struct *tty) * This info is used to go back the correct * number of columns. */ - while (tail != ldata->canon_head) { + while (MASK(tail) != MASK(ldata->canon_head)) { tail--; c = read_buf(ldata, tail); if (c == '\t') { @@ -1302,7 +1305,7 @@ n_tty_receive_char_special(struct tty_struct *tty, unsigned char c) finish_erasing(ldata); echo_char(c, tty); echo_char_raw('\n', ldata); - while (tail != ldata->read_head) { + while (MASK(tail) != MASK(ldata->read_head)) { echo_char(read_buf(ldata, tail), tty); tail++; } @@ -2411,7 +2414,7 @@ static unsigned long inq_canon(struct n_tty_data *ldata) tail = ldata->read_tail; nr = head - tail; /* Skip EOF-chars.. */ - while (head != tail) { + while (MASK(head) != MASK(tail)) { if (test_bit(tail & (N_TTY_BUF_SIZE - 1), ldata->read_flags) && read_buf(ldata, tail) == __DISABLED_CHAR) nr--; -- cgit v1.2.3 From ebec3f8f5271139df618ebdf8427e24ba102ba94 Mon Sep 17 00:00:00 2001 From: Tetsuo Handa Date: Sat, 26 May 2018 09:53:14 +0900 Subject: n_tty: Access echo_* variables carefully. syzbot is reporting stalls at __process_echoes() [1]. This is because since ldata->echo_commit < ldata->echo_tail becomes true for some reason, the discard loop is serving as almost infinite loop. This patch tries to avoid falling into ldata->echo_commit < ldata->echo_tail situation by making access to echo_* variables more carefully. Since reset_buffer_flags() is called without output_lock held, it should not touch echo_* variables. And omit a call to reset_buffer_flags() from n_tty_open() by using vzalloc(). Since add_echo_byte() is called without output_lock held, it needs memory barrier between storing into echo_buf[] and incrementing echo_head counter. echo_buf() needs corresponding memory barrier before reading echo_buf[]. Lack of handling the possibility of not-yet-stored multi-byte operation might be the reason of falling into ldata->echo_commit < ldata->echo_tail situation, for if I do WARN_ON(ldata->echo_commit == tail + 1) prior to echo_buf(ldata, tail + 1), the WARN_ON() fires. Also, explicitly masking with buffer for the former "while" loop, and use ldata->echo_commit > tail for the latter "while" loop. [1] https://syzkaller.appspot.com/bug?id=17f23b094cd80df750e5b0f8982c521ee6bcbf40 Signed-off-by: Tetsuo Handa Reported-by: syzbot Cc: Peter Hurley Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/tty/n_tty.c | 42 ++++++++++++++++++++++++------------------ 1 file changed, 24 insertions(+), 18 deletions(-) diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index b279f8730e04..431742201709 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -143,6 +143,7 @@ static inline unsigned char *read_buf_addr(struct n_tty_data *ldata, size_t i) static inline unsigned char echo_buf(struct n_tty_data *ldata, size_t i) { + smp_rmb(); /* Matches smp_wmb() in add_echo_byte(). */ return ldata->echo_buf[i & (N_TTY_BUF_SIZE - 1)]; } @@ -318,9 +319,7 @@ static inline void put_tty_queue(unsigned char c, struct n_tty_data *ldata) static void reset_buffer_flags(struct n_tty_data *ldata) { ldata->read_head = ldata->canon_head = ldata->read_tail = 0; - ldata->echo_head = ldata->echo_tail = ldata->echo_commit = 0; ldata->commit_head = 0; - ldata->echo_mark = 0; ldata->line_start = 0; ldata->erasing = 0; @@ -619,12 +618,19 @@ static size_t __process_echoes(struct tty_struct *tty) old_space = space = tty_write_room(tty); tail = ldata->echo_tail; - while (ldata->echo_commit != tail) { + while (MASK(ldata->echo_commit) != MASK(tail)) { c = echo_buf(ldata, tail); if (c == ECHO_OP_START) { unsigned char op; int no_space_left = 0; + /* + * Since add_echo_byte() is called without holding + * output_lock, we might see only portion of multi-byte + * operation. + */ + if (MASK(ldata->echo_commit) == MASK(tail + 1)) + goto not_yet_stored; /* * If the buffer byte is the start of a multi-byte * operation, get the next byte, which is either the @@ -636,6 +642,8 @@ static size_t __process_echoes(struct tty_struct *tty) unsigned int num_chars, num_bs; case ECHO_OP_ERASE_TAB: + if (MASK(ldata->echo_commit) == MASK(tail + 2)) + goto not_yet_stored; num_chars = echo_buf(ldata, tail + 2); /* @@ -730,7 +738,8 @@ static size_t __process_echoes(struct tty_struct *tty) /* If the echo buffer is nearly full (so that the possibility exists * of echo overrun before the next commit), then discard enough * data at the tail to prevent a subsequent overrun */ - while (ldata->echo_commit - tail >= ECHO_DISCARD_WATERMARK) { + while (ldata->echo_commit > tail && + ldata->echo_commit - tail >= ECHO_DISCARD_WATERMARK) { if (echo_buf(ldata, tail) == ECHO_OP_START) { if (echo_buf(ldata, tail + 1) == ECHO_OP_ERASE_TAB) tail += 3; @@ -740,6 +749,7 @@ static size_t __process_echoes(struct tty_struct *tty) tail++; } + not_yet_stored: ldata->echo_tail = tail; return old_space - space; } @@ -750,6 +760,7 @@ static void commit_echoes(struct tty_struct *tty) size_t nr, old, echoed; size_t head; + mutex_lock(&ldata->output_lock); head = ldata->echo_head; ldata->echo_mark = head; old = ldata->echo_commit - ldata->echo_tail; @@ -758,10 +769,12 @@ static void commit_echoes(struct tty_struct *tty) * is over the threshold (and try again each time another * block is accumulated) */ nr = head - ldata->echo_tail; - if (nr < ECHO_COMMIT_WATERMARK || (nr % ECHO_BLOCK > old % ECHO_BLOCK)) + if (nr < ECHO_COMMIT_WATERMARK || + (nr % ECHO_BLOCK > old % ECHO_BLOCK)) { + mutex_unlock(&ldata->output_lock); return; + } - mutex_lock(&ldata->output_lock); ldata->echo_commit = head; echoed = __process_echoes(tty); mutex_unlock(&ldata->output_lock); @@ -812,7 +825,9 @@ static void flush_echoes(struct tty_struct *tty) static inline void add_echo_byte(unsigned char c, struct n_tty_data *ldata) { - *echo_buf_addr(ldata, ldata->echo_head++) = c; + *echo_buf_addr(ldata, ldata->echo_head) = c; + smp_wmb(); /* Matches smp_rmb() in echo_buf(). */ + ldata->echo_head++; } /** @@ -1881,30 +1896,21 @@ static int n_tty_open(struct tty_struct *tty) struct n_tty_data *ldata; /* Currently a malloc failure here can panic */ - ldata = vmalloc(sizeof(*ldata)); + ldata = vzalloc(sizeof(*ldata)); if (!ldata) - goto err; + return -ENOMEM; ldata->overrun_time = jiffies; mutex_init(&ldata->atomic_read_lock); mutex_init(&ldata->output_lock); tty->disc_data = ldata; - reset_buffer_flags(tty->disc_data); - ldata->column = 0; - ldata->canon_column = 0; - ldata->num_overrun = 0; - ldata->no_room = 0; - ldata->lnext = 0; tty->closing = 0; /* indicate buffer work may resume */ clear_bit(TTY_LDISC_HALTED, &tty->flags); n_tty_set_termios(tty, NULL); tty_unthrottle(tty); - return 0; -err: - return -ENOMEM; } static inline int input_available_p(struct tty_struct *tty, int poll) -- cgit v1.2.3 From 20dcff436e9fcd2e106b0ccc48a52206bc176d70 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Wed, 6 Jun 2018 21:00:41 +0300 Subject: serial: 8250_pci: Remove stalled entries in blacklist After the commit 7d8905d06405 ("serial: 8250_pci: Enable device after we check black list") pure serial multi-port cards, such as CH355, got blacklisted and thus not being enumerated anymore. Previously, it seems, blacklisting them was on purpose to shut up pciserial_init_one() about record duplication. So, remove the entries from blacklist in order to get cards enumerated. Fixes: 7d8905d06405 ("serial: 8250_pci: Enable device after we check black list") Reported-by: Matt Turner Cc: Sergej Pupykin Cc: Alexandr Petrenko Signed-off-by: Andy Shevchenko Reviewed-and-Tested-by: Matt Turner Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250_pci.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index 3296a05cda2d..f80a300b5d68 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -3339,9 +3339,7 @@ static const struct pci_device_id blacklist[] = { /* multi-io cards handled by parport_serial */ { PCI_DEVICE(0x4348, 0x7053), }, /* WCH CH353 2S1P */ { PCI_DEVICE(0x4348, 0x5053), }, /* WCH CH353 1S1P */ - { PCI_DEVICE(0x4348, 0x7173), }, /* WCH CH355 4S */ { PCI_DEVICE(0x1c00, 0x3250), }, /* WCH CH382 2S1P */ - { PCI_DEVICE(0x1c00, 0x3470), }, /* WCH CH384 4S */ /* Moxa Smartio MUE boards handled by 8250_moxa */ { PCI_VDEVICE(MOXA, 0x1024), }, -- cgit v1.2.3 From bc6cf3669d22371f573ab0305b3abf13887c0786 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 13 Jun 2018 17:08:59 +0200 Subject: serdev: fix memleak on module unload Make sure to free all resources associated with the ida on module exit. Fixes: cd6484e1830b ("serdev: Introduce new bus for serial attached devices") Cc: stable # 4.11 Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serdev/core.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/tty/serdev/core.c b/drivers/tty/serdev/core.c index df93b727e984..9e59f4788589 100644 --- a/drivers/tty/serdev/core.c +++ b/drivers/tty/serdev/core.c @@ -617,6 +617,7 @@ EXPORT_SYMBOL_GPL(__serdev_device_driver_register); static void __exit serdev_exit(void) { bus_unregister(&serdev_bus_type); + ida_destroy(&ctrl_ida); } module_exit(serdev_exit); -- cgit v1.2.3 From 21eff69aaaa0e766ca0ce445b477698dc6a9f55a Mon Sep 17 00:00:00 2001 From: Alexander Potapenko Date: Thu, 14 Jun 2018 12:23:09 +0200 Subject: vt: prevent leaking uninitialized data to userspace via /dev/vcs* KMSAN reported an infoleak when reading from /dev/vcs*: BUG: KMSAN: kernel-infoleak in vcs_read+0x18ba/0x1cc0 Call Trace: ... kmsan_copy_to_user+0x7a/0x160 mm/kmsan/kmsan.c:1253 copy_to_user ./include/linux/uaccess.h:184 vcs_read+0x18ba/0x1cc0 drivers/tty/vt/vc_screen.c:352 __vfs_read+0x1b2/0x9d0 fs/read_write.c:416 vfs_read+0x36c/0x6b0 fs/read_write.c:452 ... Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:279 kmsan_internal_poison_shadow+0xb8/0x1b0 mm/kmsan/kmsan.c:189 kmsan_kmalloc+0x94/0x100 mm/kmsan/kmsan.c:315 __kmalloc+0x13a/0x350 mm/slub.c:3818 kmalloc ./include/linux/slab.h:517 vc_allocate+0x438/0x800 drivers/tty/vt/vt.c:787 con_install+0x8c/0x640 drivers/tty/vt/vt.c:2880 tty_driver_install_tty drivers/tty/tty_io.c:1224 tty_init_dev+0x1b5/0x1020 drivers/tty/tty_io.c:1324 tty_open_by_driver drivers/tty/tty_io.c:1959 tty_open+0x17b4/0x2ed0 drivers/tty/tty_io.c:2007 chrdev_open+0xc25/0xd90 fs/char_dev.c:417 do_dentry_open+0xccc/0x1440 fs/open.c:794 vfs_open+0x1b6/0x2f0 fs/open.c:908 ... Bytes 0-79 of 240 are uninitialized Consistently allocating |vc_screenbuf| with kzalloc() fixes the problem Reported-by: syzbot+17a8efdf800000@syzkaller.appspotmail.com Signed-off-by: Alexander Potapenko Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/tty/vt/vt.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c index 1eb1a376a041..15eb6c829d39 100644 --- a/drivers/tty/vt/vt.c +++ b/drivers/tty/vt/vt.c @@ -784,7 +784,7 @@ int vc_allocate(unsigned int currcons) /* return 0 on success */ if (!*vc->vc_uni_pagedir_loc) con_set_default_unimap(vc); - vc->vc_screenbuf = kmalloc(vc->vc_screenbuf_size, GFP_KERNEL); + vc->vc_screenbuf = kzalloc(vc->vc_screenbuf_size, GFP_KERNEL); if (!vc->vc_screenbuf) goto err_free; @@ -871,7 +871,7 @@ static int vc_do_resize(struct tty_struct *tty, struct vc_data *vc, if (new_screen_size > (4 << 20)) return -EINVAL; - newscreen = kmalloc(new_screen_size, GFP_USER); + newscreen = kzalloc(new_screen_size, GFP_USER); if (!newscreen) return -ENOMEM; -- cgit v1.2.3 From 977c7114ebda2e746a114840d3a875e0cdb826fb Mon Sep 17 00:00:00 2001 From: Doron Roberts-Kedes Date: Tue, 26 Jun 2018 18:33:33 -0700 Subject: strparser: Remove early eaten to fix full tcp receive buffer stall On receving an incomplete message, the existing code stores the remaining length of the cloned skb in the early_eaten field instead of incrementing the value returned by __strp_recv. This defers invocation of sock_rfree for the current skb until the next invocation of __strp_recv, which returns early_eaten if early_eaten is non-zero. This behavior causes a stall when the current message occupies the very tail end of a massive skb, and strp_peek/need_bytes indicates that the remainder of the current message has yet to arrive on the socket. The TCP receive buffer is totally full, causing the TCP window to go to zero, so the remainder of the message will never arrive. Incrementing the value returned by __strp_recv by the amount otherwise stored in early_eaten prevents stalls of this nature. Signed-off-by: Doron Roberts-Kedes Signed-off-by: David S. Miller --- net/strparser/strparser.c | 17 +---------------- 1 file changed, 1 insertion(+), 16 deletions(-) diff --git a/net/strparser/strparser.c b/net/strparser/strparser.c index 373836615c57..625acb27efcc 100644 --- a/net/strparser/strparser.c +++ b/net/strparser/strparser.c @@ -35,7 +35,6 @@ struct _strp_msg { */ struct strp_msg strp; int accum_len; - int early_eaten; }; static inline struct _strp_msg *_strp_msg(struct sk_buff *skb) @@ -115,20 +114,6 @@ static int __strp_recv(read_descriptor_t *desc, struct sk_buff *orig_skb, head = strp->skb_head; if (head) { /* Message already in progress */ - - stm = _strp_msg(head); - if (unlikely(stm->early_eaten)) { - /* Already some number of bytes on the receive sock - * data saved in skb_head, just indicate they - * are consumed. - */ - eaten = orig_len <= stm->early_eaten ? - orig_len : stm->early_eaten; - stm->early_eaten -= eaten; - - return eaten; - } - if (unlikely(orig_offset)) { /* Getting data with a non-zero offset when a message is * in progress is not expected. If it does happen, we @@ -297,9 +282,9 @@ static int __strp_recv(read_descriptor_t *desc, struct sk_buff *orig_skb, } stm->accum_len += cand_len; + eaten += cand_len; strp->need_bytes = stm->strp.full_len - stm->accum_len; - stm->early_eaten = cand_len; STRP_STATS_ADD(strp->stats.bytes, cand_len); desc->count = 0; /* Stop reading socket */ break; -- cgit v1.2.3 From 8e75887d321d102200abf3a9fa621e2c10ff4cc5 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Tue, 26 Jun 2018 20:13:48 -0700 Subject: bpfilter: include bpfilter_umh in assembly instead of using objcopy What we want here is to embed a user-space program into the kernel. Instead of the complex ELF magic, let's simply wrap it in the assembly with the '.incbin' directive. Signed-off-by: Masahiro Yamada Signed-off-by: Alexei Starovoitov Signed-off-by: David S. Miller --- net/bpfilter/Makefile | 17 ++--------------- net/bpfilter/bpfilter_kern.c | 11 +++++------ net/bpfilter/bpfilter_umh_blob.S | 7 +++++++ 3 files changed, 14 insertions(+), 21 deletions(-) create mode 100644 net/bpfilter/bpfilter_umh_blob.S diff --git a/net/bpfilter/Makefile b/net/bpfilter/Makefile index 051dc18b8ccb..39c6980b5d99 100644 --- a/net/bpfilter/Makefile +++ b/net/bpfilter/Makefile @@ -15,20 +15,7 @@ ifeq ($(CONFIG_BPFILTER_UMH), y) HOSTLDFLAGS += -static endif -# a bit of elf magic to convert bpfilter_umh binary into a binary blob -# inside bpfilter_umh.o elf file referenced by -# _binary_net_bpfilter_bpfilter_umh_start symbol -# which bpfilter_kern.c passes further into umh blob loader at run-time -quiet_cmd_copy_umh = GEN $@ - cmd_copy_umh = echo ':' > $(obj)/.bpfilter_umh.o.cmd; \ - $(OBJCOPY) -I binary \ - `LC_ALL=C $(OBJDUMP) -f net/bpfilter/bpfilter_umh \ - |awk -F' |,' '/file format/{print "-O",$$NF} \ - /^architecture:/{print "-B",$$2}'` \ - --rename-section .data=.init.rodata $< $@ - -$(obj)/bpfilter_umh.o: $(obj)/bpfilter_umh - $(call cmd,copy_umh) +$(obj)/bpfilter_umh_blob.o: $(obj)/bpfilter_umh obj-$(CONFIG_BPFILTER_UMH) += bpfilter.o -bpfilter-objs += bpfilter_kern.o bpfilter_umh.o +bpfilter-objs += bpfilter_kern.o bpfilter_umh_blob.o diff --git a/net/bpfilter/bpfilter_kern.c b/net/bpfilter/bpfilter_kern.c index 09522573f611..f0fc182d3db7 100644 --- a/net/bpfilter/bpfilter_kern.c +++ b/net/bpfilter/bpfilter_kern.c @@ -10,11 +10,8 @@ #include #include "msgfmt.h" -#define UMH_start _binary_net_bpfilter_bpfilter_umh_start -#define UMH_end _binary_net_bpfilter_bpfilter_umh_end - -extern char UMH_start; -extern char UMH_end; +extern char bpfilter_umh_start; +extern char bpfilter_umh_end; static struct umh_info info; /* since ip_getsockopt() can run in parallel, serialize access to umh */ @@ -93,7 +90,9 @@ static int __init load_umh(void) int err; /* fork usermode process */ - err = fork_usermode_blob(&UMH_start, &UMH_end - &UMH_start, &info); + err = fork_usermode_blob(&bpfilter_umh_start, + &bpfilter_umh_end - &bpfilter_umh_start, + &info); if (err) return err; pr_info("Loaded bpfilter_umh pid %d\n", info.pid); diff --git a/net/bpfilter/bpfilter_umh_blob.S b/net/bpfilter/bpfilter_umh_blob.S new file mode 100644 index 000000000000..40311d10d2f2 --- /dev/null +++ b/net/bpfilter/bpfilter_umh_blob.S @@ -0,0 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + .section .init.rodata, "a" + .global bpfilter_umh_start +bpfilter_umh_start: + .incbin "net/bpfilter/bpfilter_umh" + .global bpfilter_umh_end +bpfilter_umh_end: -- cgit v1.2.3 From 15ecbe94a45ef88491ca459b26efdd02f91edb6d Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 27 Jun 2018 08:47:21 -0700 Subject: tcp: add one more quick ack after after ECN events Larry Brakmo proposal ( https://patchwork.ozlabs.org/patch/935233/ tcp: force cwnd at least 2 in tcp_cwnd_reduction) made us rethink about our recent patch removing ~16 quick acks after ECN events. tcp_enter_quickack_mode(sk, 1) makes sure one immediate ack is sent, but in the case the sender cwnd was lowered to 1, we do not want to have a delayed ack for the next packet we will receive. Fixes: 522040ea5fdd ("tcp: do not aggressively quick ack after ECN events") Signed-off-by: Eric Dumazet Reported-by: Neal Cardwell Cc: Lawrence Brakmo Acked-by: Neal Cardwell Signed-off-by: David S. Miller --- net/ipv4/tcp_input.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index 355d3dffd021..045d930d01a9 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -265,7 +265,7 @@ static void __tcp_ecn_check_ce(struct sock *sk, const struct sk_buff *skb) * it is probably a retransmit. */ if (tp->ecn_flags & TCP_ECN_SEEN) - tcp_enter_quickack_mode(sk, 1); + tcp_enter_quickack_mode(sk, 2); break; case INET_ECN_CE: if (tcp_ca_needs_ecn(sk)) @@ -273,7 +273,7 @@ static void __tcp_ecn_check_ce(struct sock *sk, const struct sk_buff *skb) if (!(tp->ecn_flags & TCP_ECN_DEMAND_CWR)) { /* Better not delay acks, sender can have a very low cwnd */ - tcp_enter_quickack_mode(sk, 1); + tcp_enter_quickack_mode(sk, 2); tp->ecn_flags |= TCP_ECN_DEMAND_CWR; } tp->ecn_flags |= TCP_ECN_SEEN; -- cgit v1.2.3 From 24ac3a08e65845a098140ff270229dec4a897404 Mon Sep 17 00:00:00 2001 From: Ursula Braun Date: Wed, 27 Jun 2018 17:59:50 +0200 Subject: net/smc: rebuild nonblocking connect The recent poll change may lead to stalls for non-blocking connecting SMC sockets, since sock_poll_wait is no longer performed on the internal CLC socket, but on the outer SMC socket. kernel_connect() on the internal CLC socket returns with -EINPROGRESS, but the wake up logic does not work in all cases. If the internal CLC socket is still in state TCP_SYN_SENT when polled, sock_poll_wait() from sock_poll() does not sleep. It is supposed to sleep till the state of the internal CLC socket switches to TCP_ESTABLISHED. This problem triggered a redesign of the SMC nonblocking connect logic. This patch introduces a connect worker covering all connect steps followed by a wake up of socket waiters. It allows to get rid of all delays and locks in smc_poll(). Fixes: c0129a061442 ("smc: convert to ->poll_mask") Signed-off-by: Ursula Braun Signed-off-by: David S. Miller --- net/smc/af_smc.c | 91 +++++++++++++++++++++++++++++++++++++++----------------- net/smc/smc.h | 8 +++++ 2 files changed, 71 insertions(+), 28 deletions(-) diff --git a/net/smc/af_smc.c b/net/smc/af_smc.c index da7f02edcd37..4d1d4ddb2f49 100644 --- a/net/smc/af_smc.c +++ b/net/smc/af_smc.c @@ -45,6 +45,7 @@ static DEFINE_MUTEX(smc_create_lgr_pending); /* serialize link group */ static void smc_tcp_listen_work(struct work_struct *); +static void smc_connect_work(struct work_struct *); static void smc_set_keepalive(struct sock *sk, int val) { @@ -122,6 +123,12 @@ static int smc_release(struct socket *sock) goto out; smc = smc_sk(sk); + + /* cleanup for a dangling non-blocking connect */ + flush_work(&smc->connect_work); + kfree(smc->connect_info); + smc->connect_info = NULL; + if (sk->sk_state == SMC_LISTEN) /* smc_close_non_accepted() is called and acquires * sock lock for child sockets again @@ -186,6 +193,7 @@ static struct sock *smc_sock_alloc(struct net *net, struct socket *sock, sk->sk_protocol = protocol; smc = smc_sk(sk); INIT_WORK(&smc->tcp_listen_work, smc_tcp_listen_work); + INIT_WORK(&smc->connect_work, smc_connect_work); INIT_DELAYED_WORK(&smc->conn.tx_work, smc_tx_work); INIT_LIST_HEAD(&smc->accept_q); spin_lock_init(&smc->accept_q_lock); @@ -576,6 +584,35 @@ static int __smc_connect(struct smc_sock *smc) return 0; } +static void smc_connect_work(struct work_struct *work) +{ + struct smc_sock *smc = container_of(work, struct smc_sock, + connect_work); + int rc; + + lock_sock(&smc->sk); + rc = kernel_connect(smc->clcsock, &smc->connect_info->addr, + smc->connect_info->alen, smc->connect_info->flags); + if (smc->clcsock->sk->sk_err) { + smc->sk.sk_err = smc->clcsock->sk->sk_err; + goto out; + } + if (rc < 0) { + smc->sk.sk_err = -rc; + goto out; + } + + rc = __smc_connect(smc); + if (rc < 0) + smc->sk.sk_err = -rc; + +out: + smc->sk.sk_state_change(&smc->sk); + kfree(smc->connect_info); + smc->connect_info = NULL; + release_sock(&smc->sk); +} + static int smc_connect(struct socket *sock, struct sockaddr *addr, int alen, int flags) { @@ -605,15 +642,32 @@ static int smc_connect(struct socket *sock, struct sockaddr *addr, smc_copy_sock_settings_to_clc(smc); tcp_sk(smc->clcsock->sk)->syn_smc = 1; - rc = kernel_connect(smc->clcsock, addr, alen, flags); - if (rc) - goto out; + if (flags & O_NONBLOCK) { + if (smc->connect_info) { + rc = -EALREADY; + goto out; + } + smc->connect_info = kzalloc(alen + 2 * sizeof(int), GFP_KERNEL); + if (!smc->connect_info) { + rc = -ENOMEM; + goto out; + } + smc->connect_info->alen = alen; + smc->connect_info->flags = flags ^ O_NONBLOCK; + memcpy(&smc->connect_info->addr, addr, alen); + schedule_work(&smc->connect_work); + rc = -EINPROGRESS; + } else { + rc = kernel_connect(smc->clcsock, addr, alen, flags); + if (rc) + goto out; - rc = __smc_connect(smc); - if (rc < 0) - goto out; - else - rc = 0; /* success cases including fallback */ + rc = __smc_connect(smc); + if (rc < 0) + goto out; + else + rc = 0; /* success cases including fallback */ + } out: release_sock(sk); @@ -1278,34 +1332,17 @@ static __poll_t smc_poll_mask(struct socket *sock, __poll_t events) struct sock *sk = sock->sk; __poll_t mask = 0; struct smc_sock *smc; - int rc; if (!sk) return EPOLLNVAL; smc = smc_sk(sock->sk); - sock_hold(sk); - lock_sock(sk); if ((sk->sk_state == SMC_INIT) || smc->use_fallback) { /* delegate to CLC child sock */ - release_sock(sk); mask = smc->clcsock->ops->poll_mask(smc->clcsock, events); - lock_sock(sk); sk->sk_err = smc->clcsock->sk->sk_err; - if (sk->sk_err) { + if (sk->sk_err) mask |= EPOLLERR; - } else { - /* if non-blocking connect finished ... */ - if (sk->sk_state == SMC_INIT && - mask & EPOLLOUT && - smc->clcsock->sk->sk_state != TCP_CLOSE) { - rc = __smc_connect(smc); - if (rc < 0) - mask |= EPOLLERR; - /* success cases including fallback */ - mask |= EPOLLOUT | EPOLLWRNORM; - } - } } else { if (sk->sk_err) mask |= EPOLLERR; @@ -1334,8 +1371,6 @@ static __poll_t smc_poll_mask(struct socket *sock, __poll_t events) mask |= EPOLLPRI; } - release_sock(sk); - sock_put(sk); return mask; } diff --git a/net/smc/smc.h b/net/smc/smc.h index 51ae1f10d81a..d7ca26570482 100644 --- a/net/smc/smc.h +++ b/net/smc/smc.h @@ -187,11 +187,19 @@ struct smc_connection { struct work_struct close_work; /* peer sent some closing */ }; +struct smc_connect_info { + int flags; + int alen; + struct sockaddr addr; +}; + struct smc_sock { /* smc sock container */ struct sock sk; struct socket *clcsock; /* internal tcp socket */ struct smc_connection conn; /* smc connection */ struct smc_sock *listen_smc; /* listen parent */ + struct smc_connect_info *connect_info; /* connect address & flags */ + struct work_struct connect_work; /* handle non-blocking connect*/ struct work_struct tcp_listen_work;/* handle tcp socket accepts */ struct work_struct smc_listen_work;/* prepare new accept socket */ struct list_head accept_q; /* sockets to be accepted */ -- cgit v1.2.3 From 4205c88eaf17b5f3ee30032d68df55cd5d9077a1 Mon Sep 17 00:00:00 2001 From: Jose Abreu Date: Wed, 27 Jun 2018 15:03:20 +0100 Subject: net: stmmac: Set DMA buffer size in HW This is clearly a bug. We need to set the DMA buffer size in the HW otherwise corruption can occur when receiving packets. This is probably not occuring because of small MTU values and because HW has a default value internally (which currently is bigger than default buffer size). Signed-off-by: Jose Abreu Cc: David S. Miller Cc: Joao Pinto Cc: Vitor Soares Cc: Giuseppe Cavallaro Cc: Alexandre Torgue Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c | 12 ++++++++++++ drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.h | 2 ++ drivers/net/ethernet/stmicro/stmmac/hwif.h | 3 +++ drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 2 ++ 4 files changed, 19 insertions(+) diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c index d37f17ca62fe..65bc3556bd8f 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c @@ -407,6 +407,16 @@ static void dwmac4_enable_tso(void __iomem *ioaddr, bool en, u32 chan) } } +static void dwmac4_set_bfsize(void __iomem *ioaddr, int bfsize, u32 chan) +{ + u32 value = readl(ioaddr + DMA_CHAN_RX_CONTROL(chan)); + + value &= ~DMA_RBSZ_MASK; + value |= (bfsize << DMA_RBSZ_SHIFT) & DMA_RBSZ_MASK; + + writel(value, ioaddr + DMA_CHAN_RX_CONTROL(chan)); +} + const struct stmmac_dma_ops dwmac4_dma_ops = { .reset = dwmac4_dma_reset, .init = dwmac4_dma_init, @@ -431,6 +441,7 @@ const struct stmmac_dma_ops dwmac4_dma_ops = { .set_rx_tail_ptr = dwmac4_set_rx_tail_ptr, .set_tx_tail_ptr = dwmac4_set_tx_tail_ptr, .enable_tso = dwmac4_enable_tso, + .set_bfsize = dwmac4_set_bfsize, }; const struct stmmac_dma_ops dwmac410_dma_ops = { @@ -457,4 +468,5 @@ const struct stmmac_dma_ops dwmac410_dma_ops = { .set_rx_tail_ptr = dwmac4_set_rx_tail_ptr, .set_tx_tail_ptr = dwmac4_set_tx_tail_ptr, .enable_tso = dwmac4_enable_tso, + .set_bfsize = dwmac4_set_bfsize, }; diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.h b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.h index c63c1fe3f26b..22a4a6dbb1a4 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.h +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.h @@ -120,6 +120,8 @@ /* DMA Rx Channel X Control register defines */ #define DMA_CONTROL_SR BIT(0) +#define DMA_RBSZ_MASK GENMASK(14, 1) +#define DMA_RBSZ_SHIFT 1 /* Interrupt status per channel */ #define DMA_CHAN_STATUS_REB GENMASK(21, 19) diff --git a/drivers/net/ethernet/stmicro/stmmac/hwif.h b/drivers/net/ethernet/stmicro/stmmac/hwif.h index e44e7b26ce82..fe8b536b13f8 100644 --- a/drivers/net/ethernet/stmicro/stmmac/hwif.h +++ b/drivers/net/ethernet/stmicro/stmmac/hwif.h @@ -183,6 +183,7 @@ struct stmmac_dma_ops { void (*set_rx_tail_ptr)(void __iomem *ioaddr, u32 tail_ptr, u32 chan); void (*set_tx_tail_ptr)(void __iomem *ioaddr, u32 tail_ptr, u32 chan); void (*enable_tso)(void __iomem *ioaddr, bool en, u32 chan); + void (*set_bfsize)(void __iomem *ioaddr, int bfsize, u32 chan); }; #define stmmac_reset(__priv, __args...) \ @@ -235,6 +236,8 @@ struct stmmac_dma_ops { stmmac_do_void_callback(__priv, dma, set_tx_tail_ptr, __args) #define stmmac_enable_tso(__priv, __args...) \ stmmac_do_void_callback(__priv, dma, enable_tso, __args) +#define stmmac_set_dma_bfsize(__priv, __args...) \ + stmmac_do_void_callback(__priv, dma, set_bfsize, __args) struct mac_device_info; struct net_device; diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index cba46b62a1cd..60f59abab009 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -1804,6 +1804,8 @@ static void stmmac_dma_operation_mode(struct stmmac_priv *priv) stmmac_dma_rx_mode(priv, priv->ioaddr, rxmode, chan, rxfifosz, qmode); + stmmac_set_dma_bfsize(priv, priv->ioaddr, priv->dma_buf_sz, + chan); } for (chan = 0; chan < tx_channels_count; chan++) { -- cgit v1.2.3 From ecd53ac2f2c6e42fe732d0aa282192cb6ad3faea Mon Sep 17 00:00:00 2001 From: Dirk Gouders Date: Fri, 22 Jun 2018 21:27:38 +0200 Subject: kconfig: handle P_SYMBOL in print_symbol() Each symbol has a property of type P_SYMBOL since commit 59e89e3ddf85 (kconfig: save location of config symbols). Handle those properties in print_symbol(). Further, place a pointer to print_symbol() in the comment above the list of known property type. Signed-off-by: Dirk Gouders Signed-off-by: Masahiro Yamada --- scripts/kconfig/expr.h | 3 +++ scripts/kconfig/zconf.y | 4 ++++ 2 files changed, 7 insertions(+) diff --git a/scripts/kconfig/expr.h b/scripts/kconfig/expr.h index 94a383b21df6..f63b41b0dd49 100644 --- a/scripts/kconfig/expr.h +++ b/scripts/kconfig/expr.h @@ -171,6 +171,9 @@ struct symbol { * config BAZ * int "BAZ Value" * range 1..255 + * + * Please, also check zconf.y:print_symbol() when modifying the + * list of property types! */ enum prop_type { P_UNKNOWN, diff --git a/scripts/kconfig/zconf.y b/scripts/kconfig/zconf.y index ed84d4a8e288..4b68272ebdb9 100644 --- a/scripts/kconfig/zconf.y +++ b/scripts/kconfig/zconf.y @@ -717,6 +717,10 @@ static void print_symbol(FILE *out, struct menu *menu) print_quoted_string(out, prop->text); fputc('\n', out); break; + case P_SYMBOL: + fputs( " symbol ", out); + fprintf(out, "%s\n", prop->sym->name); + break; default: fprintf(out, " unknown prop %d!\n", prop->type); break; -- cgit v1.2.3 From 8b9d27124094964b3c4f8985ba66355ac4d9e842 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Sun, 24 Jun 2018 01:41:51 +0900 Subject: kbuild: reword help of LD_DEAD_CODE_DATA_ELIMINATION Since commit 5d20ee3192a5 ("kbuild: Allow LD_DEAD_CODE_DATA_ELIMINATION to be selectable if enabled"), HAVE_LD_DEAD_CODE_DATA_ELIMINATION is supposed to be selected by architectures that are capable of this functionality. LD_DEAD_CODE_DATA_ELIMINATION is now users' selection. Update the help message. Signed-off-by: Masahiro Yamada --- init/Kconfig | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/init/Kconfig b/init/Kconfig index 5a52f07259a2..eaad1536647f 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -1051,10 +1051,9 @@ config LD_DEAD_CODE_DATA_ELIMINATION depends on HAVE_LD_DEAD_CODE_DATA_ELIMINATION depends on EXPERT help - Select this if the architecture wants to do dead code and - data elimination with the linker by compiling with - -ffunction-sections -fdata-sections, and linking with - --gc-sections. + Enable this if you want to do dead code and data elimination with + the linker by compiling with -ffunction-sections -fdata-sections, + and linking with --gc-sections. This can reduce on disk and in-memory size of the kernel code and static data, particularly for small configs and -- cgit v1.2.3 From 73d1c580f92b203f4c3a189ee98c917c65712f7e Mon Sep 17 00:00:00 2001 From: Jerry James Date: Sat, 23 Jun 2018 22:49:04 +0200 Subject: kconfig: loop boundary condition fix If buf[-1] just happens to hold the byte 0x0A, then nread can wrap around to (size_t)-1, leading to invalid memory accesses. This has caused segmentation faults when trying to build the latest kernel snapshots for i686 in Fedora: https://bugzilla.redhat.com/show_bug.cgi?id=1592374 Signed-off-by: Jerry James [alexpl@fedoraproject.org: reformatted patch for submission] Signed-off-by: Alexander Ploumistos Signed-off-by: Masahiro Yamada --- scripts/kconfig/preprocess.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/scripts/kconfig/preprocess.c b/scripts/kconfig/preprocess.c index 65da87fce907..5ca2df790d3c 100644 --- a/scripts/kconfig/preprocess.c +++ b/scripts/kconfig/preprocess.c @@ -156,7 +156,7 @@ static char *do_shell(int argc, char *argv[]) nread--; /* remove trailing new lines */ - while (buf[nread - 1] == '\n') + while (nread > 0 && buf[nread - 1] == '\n') nread--; buf[nread] = 0; -- cgit v1.2.3 From 682630f00a219a1b0696abe9c0967e660068187b Mon Sep 17 00:00:00 2001 From: Sagi Grimberg Date: Mon, 25 Jun 2018 20:58:17 +0300 Subject: nvme-rdma: fix possible double free of controller async event buffer If reconnect/reset failed where the controller async event buffer was freed, we might end up freeing it again as we call nvme_rdma_destroy_admin_queue again in the remove path. Given that the sequence is guaranteed to serialize by .ctrl_stop, we simply set ctrl->async_event_sqe.data to NULL and don't free it in future visits. Reported-by: Max Gurtovoy Tested-by: Max Gurtovoy Signed-off-by: Sagi Grimberg Signed-off-by: Christoph Hellwig --- drivers/nvme/host/rdma.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/nvme/host/rdma.c b/drivers/nvme/host/rdma.c index 9544625c0b7d..518c5b09038c 100644 --- a/drivers/nvme/host/rdma.c +++ b/drivers/nvme/host/rdma.c @@ -732,8 +732,11 @@ static void nvme_rdma_destroy_admin_queue(struct nvme_rdma_ctrl *ctrl, blk_cleanup_queue(ctrl->ctrl.admin_q); nvme_rdma_free_tagset(&ctrl->ctrl, ctrl->ctrl.admin_tagset); } - nvme_rdma_free_qe(ctrl->device->dev, &ctrl->async_event_sqe, - sizeof(struct nvme_command), DMA_TO_DEVICE); + if (ctrl->async_event_sqe.data) { + nvme_rdma_free_qe(ctrl->device->dev, &ctrl->async_event_sqe, + sizeof(struct nvme_command), DMA_TO_DEVICE); + ctrl->async_event_sqe.data = NULL; + } nvme_rdma_free_queue(&ctrl->queues[0]); } -- cgit v1.2.3 From 704e38303153c797d66c41bbe8325202f549b53c Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Fri, 18 May 2018 16:27:15 +0200 Subject: parisc: Drop struct sigaction from not exported header file This header file isn't exported to userspace, so there is no benefit in defining struct sigaction for userspace here. Signed-off-by: Helge Deller --- arch/parisc/include/asm/signal.h | 8 -------- 1 file changed, 8 deletions(-) diff --git a/arch/parisc/include/asm/signal.h b/arch/parisc/include/asm/signal.h index eeb5c8858663..715c96ba2ec8 100644 --- a/arch/parisc/include/asm/signal.h +++ b/arch/parisc/include/asm/signal.h @@ -21,14 +21,6 @@ typedef struct { unsigned long sig[_NSIG_WORDS]; } sigset_t; -#ifndef __KERNEL__ -struct sigaction { - __sighandler_t sa_handler; - unsigned long sa_flags; - sigset_t sa_mask; /* mask last for extensibility */ -}; -#endif - #include #endif /* !__ASSEMBLY */ -- cgit v1.2.3 From 1c971f39e62222d567f179ccaa1a186f1c203b52 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Fri, 15 Jun 2018 22:33:44 +0200 Subject: parisc: Mark 16kB and 64kB page sizes BROKEN A full boot only succeeds with 4kB page sizes currently. For 16kB and 64kB page size support somone needs to fix the LBA PCI code at least, so mark those broken for now. Signed-off-by: Helge Deller --- arch/parisc/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig index c480770fabcd..a9a507a19540 100644 --- a/arch/parisc/Kconfig +++ b/arch/parisc/Kconfig @@ -244,11 +244,11 @@ config PARISC_PAGE_SIZE_4KB config PARISC_PAGE_SIZE_16KB bool "16KB" - depends on PA8X00 + depends on PA8X00 && BROKEN config PARISC_PAGE_SIZE_64KB bool "64KB" - depends on PA8X00 + depends on PA8X00 && BROKEN endchoice -- cgit v1.2.3 From 5e791d2e4785f9ec7da4a02b9e8d00dace9e6917 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Tue, 29 May 2018 22:38:01 +0300 Subject: parisc: Convert printk(KERN_LEVEL) to pr_lvl() Convert printk(KERN_LEVEL) type of calls to pr_lvl() macros. While here, - convert printk() to pr_info() - join back string literal to be on one line - use %*phN (note, it gives 1 byte more for sake of simplicity) Signed-off-by: Andy Shevchenko Signed-off-by: Helge Deller --- arch/parisc/kernel/drivers.c | 25 +++++++++---------------- 1 file changed, 9 insertions(+), 16 deletions(-) diff --git a/arch/parisc/kernel/drivers.c b/arch/parisc/kernel/drivers.c index e0e1c9775c32..5eb979d04b90 100644 --- a/arch/parisc/kernel/drivers.c +++ b/arch/parisc/kernel/drivers.c @@ -154,17 +154,14 @@ int register_parisc_driver(struct parisc_driver *driver) { /* FIXME: we need this because apparently the sti * driver can be registered twice */ - if(driver->drv.name) { - printk(KERN_WARNING - "BUG: skipping previously registered driver %s\n", - driver->name); + if (driver->drv.name) { + pr_warn("BUG: skipping previously registered driver %s\n", + driver->name); return 1; } if (!driver->probe) { - printk(KERN_WARNING - "BUG: driver %s has no probe routine\n", - driver->name); + pr_warn("BUG: driver %s has no probe routine\n", driver->name); return 1; } @@ -491,12 +488,9 @@ alloc_pa_dev(unsigned long hpa, struct hardware_path *mod_path) dev = create_parisc_device(mod_path); if (dev->id.hw_type != HPHW_FAULTY) { - printk(KERN_ERR "Two devices have hardware path [%s]. " - "IODC data for second device: " - "%02x%02x%02x%02x%02x%02x\n" - "Rearranging GSC cards sometimes helps\n", - parisc_pathname(dev), iodc_data[0], iodc_data[1], - iodc_data[3], iodc_data[4], iodc_data[5], iodc_data[6]); + pr_err("Two devices have hardware path [%s]. IODC data for second device: %7phN\n" + "Rearranging GSC cards sometimes helps\n", + parisc_pathname(dev), iodc_data); return NULL; } @@ -528,8 +522,7 @@ alloc_pa_dev(unsigned long hpa, struct hardware_path *mod_path) * the keyboard controller */ if ((hpa & 0xfff) == 0 && insert_resource(&iomem_resource, &dev->hpa)) - printk("Unable to claim HPA %lx for device %s\n", - hpa, name); + pr_warn("Unable to claim HPA %lx for device %s\n", hpa, name); return dev; } @@ -875,7 +868,7 @@ static void print_parisc_device(struct parisc_device *dev) static int count; print_pa_hwpath(dev, hw_path); - printk(KERN_INFO "%d. %s at 0x%px [%s] { %d, 0x%x, 0x%.3x, 0x%.5x }", + pr_info("%d. %s at 0x%px [%s] { %d, 0x%x, 0x%.3x, 0x%.5x }", ++count, dev->name, (void*) dev->hpa.start, hw_path, dev->id.hw_type, dev->id.hversion_rev, dev->id.hversion, dev->id.sversion); -- cgit v1.2.3 From 435d34c7a48de5e89047ef9c7dce6528831b258b Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Fri, 15 Jun 2018 22:38:22 +0200 Subject: parisc: Default to 4 SMP CPUs I haven't seen any real SMP machine yet with > 4 CPUs (we don't suport SuperDomes yet), so reducing the default maximum number of CPUs may speed up various bitop functions which depend on number of CPUs in the system. bload-o-meter on a typical 64-bit kernel shows: Data: add/remove: 0/0 grow/shrink: 0/10 up/down: 0/-3724 (-3724) Total: Before=1910404, After=1906680, chg -0.19% Code: add/remove: 0/2 grow/shrink: 42/38 up/down: 2320/-3500 (-1180) Total: Before=11053099, After=11051919, chg -0.01% Signed-off-by: Helge Deller --- arch/parisc/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig index a9a507a19540..17526bebcbd2 100644 --- a/arch/parisc/Kconfig +++ b/arch/parisc/Kconfig @@ -347,7 +347,7 @@ config NR_CPUS int "Maximum number of CPUs (2-32)" range 2 32 depends on SMP - default "32" + default "4" endmenu -- cgit v1.2.3 From 2765b3edc41bdf18960ca7e6b656fb933ac191d6 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Thu, 28 Jun 2018 17:41:58 +0200 Subject: parisc: Wire up io_pgetevents syscall Signed-off-by: Helge Deller --- arch/parisc/include/uapi/asm/unistd.h | 3 ++- arch/parisc/kernel/syscall_table.S | 1 + 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/parisc/include/uapi/asm/unistd.h b/arch/parisc/include/uapi/asm/unistd.h index 4872e77aa96b..dc77c5a51db7 100644 --- a/arch/parisc/include/uapi/asm/unistd.h +++ b/arch/parisc/include/uapi/asm/unistd.h @@ -364,8 +364,9 @@ #define __NR_preadv2 (__NR_Linux + 347) #define __NR_pwritev2 (__NR_Linux + 348) #define __NR_statx (__NR_Linux + 349) +#define __NR_io_pgetevents (__NR_Linux + 350) -#define __NR_Linux_syscalls (__NR_statx + 1) +#define __NR_Linux_syscalls (__NR_io_pgetevents + 1) #define __IGNORE_select /* newselect */ diff --git a/arch/parisc/kernel/syscall_table.S b/arch/parisc/kernel/syscall_table.S index 6308749359e4..fe3f2a49d2b1 100644 --- a/arch/parisc/kernel/syscall_table.S +++ b/arch/parisc/kernel/syscall_table.S @@ -445,6 +445,7 @@ ENTRY_COMP(preadv2) ENTRY_COMP(pwritev2) ENTRY_SAME(statx) + ENTRY_COMP(io_pgetevents) /* 350 */ .ifne (. - 90b) - (__NR_Linux_syscalls * (91b - 90b)) -- cgit v1.2.3 From 297ba57dcdec7ea37e702bcf1a577ac32a034e21 Mon Sep 17 00:00:00 2001 From: Bart Van Assche Date: Wed, 27 Jun 2018 12:55:18 -0700 Subject: block: Fix cloning of requests with a special payload This patch avoids that removing a path controlled by the dm-mpath driver while mkfs is running triggers the following kernel bug: kernel BUG at block/blk-core.c:3347! invalid opcode: 0000 [#1] PREEMPT SMP KASAN CPU: 20 PID: 24369 Comm: mkfs.ext4 Not tainted 4.18.0-rc1-dbg+ #2 RIP: 0010:blk_end_request_all+0x68/0x70 Call Trace: dm_softirq_done+0x326/0x3d0 [dm_mod] blk_done_softirq+0x19b/0x1e0 __do_softirq+0x128/0x60d irq_exit+0x100/0x110 smp_call_function_single_interrupt+0x90/0x330 call_function_single_interrupt+0xf/0x20 Fixes: f9d03f96b988 ("block: improve handling of the magic discard payload") Reviewed-by: Ming Lei Reviewed-by: Christoph Hellwig Acked-by: Mike Snitzer Signed-off-by: Bart Van Assche Cc: Hannes Reinecke Cc: Johannes Thumshirn Cc: Signed-off-by: Jens Axboe --- block/blk-core.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/block/blk-core.c b/block/blk-core.c index afd2596ea3d3..f84a9b7b6f5a 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -3473,6 +3473,10 @@ static void __blk_rq_prep_clone(struct request *dst, struct request *src) dst->cpu = src->cpu; dst->__sector = blk_rq_pos(src); dst->__data_len = blk_rq_bytes(src); + if (src->rq_flags & RQF_SPECIAL_PAYLOAD) { + dst->rq_flags |= RQF_SPECIAL_PAYLOAD; + dst->special_vec = src->special_vec; + } dst->nr_phys_segments = src->nr_phys_segments; dst->ioprio = src->ioprio; dst->extra_len = src->extra_len; -- cgit v1.2.3 From f904390ac8b2657b97ba3c1ad2b1be0822fa62ad Mon Sep 17 00:00:00 2001 From: oscardagrach Date: Wed, 13 Jun 2018 10:13:05 -0500 Subject: arm64: dts: hikey: Define wl1835 power capabilities These properties are required for compatibility with runtime PM. Without these properties, MMC host controller will not be aware of power capabilities. When the wlcore driver attempts to power on the device, it will erroneously fail with -EACCES. Fixes: 60f36637bbbd ("wlcore: sdio: allow pm to handle sdio power") Signed-off-by: Ryan Grachek Tested-by: John Stultz Acked-by: John Stultz Signed-off-by: Wei Xu --- arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts index edb4ee0b8896..7f12624f6c8e 100644 --- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts +++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts @@ -322,6 +322,8 @@ dwmmc_2: dwmmc2@f723f000 { bus-width = <0x4>; non-removable; + cap-power-off-card; + keep-power-in-suspend; vmmc-supply = <®_vdd_3v3>; mmc-pwrseq = <&wl1835_pwrseq>; -- cgit v1.2.3 From a30449eb3ac908f26b4bc963a58039a5f2725ffa Mon Sep 17 00:00:00 2001 From: oscardagrach Date: Wed, 13 Jun 2018 13:03:21 -0500 Subject: arm64: dts: hikey960: Define wl1837 power capabilities These properties are required for compatibility with runtime PM. Without these properties, MMC host controller will not be aware of power capabilities. When the wlcore driver attempts to power on the device, it will erroneously fail with -EACCES. This fixes a regression found here: https://lkml.org/lkml/2018/6/12/930 Fixes: 60f36637bbbd ("wlcore: sdio: allow pm to handle sdio power") Signed-off-by: Ryan Grachek Tested-by: John Stultz Acked-by: John Stultz Tested-by: Valentin Schneider Signed-off-by: Wei Xu --- arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts index c6999624ed8a..68c5a6c819ae 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts +++ b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts @@ -585,6 +585,8 @@ vmmc-supply = <&wlan_en>; ti,non-removable; non-removable; + cap-power-off-card; + keep-power-in-suspend; #address-cells = <0x1>; #size-cells = <0x0>; status = "ok"; -- cgit v1.2.3 From a11e1d432b51f63ba698d044441284a661f01144 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Thu, 28 Jun 2018 09:43:44 -0700 Subject: Revert changes to convert to ->poll_mask() and aio IOCB_CMD_POLL The poll() changes were not well thought out, and completely unexplained. They also caused a huge performance regression, because "->poll()" was no longer a trivial file operation that just called down to the underlying file operations, but instead did at least two indirect calls. Indirect calls are sadly slow now with the Spectre mitigation, but the performance problem could at least be largely mitigated by changing the "->get_poll_head()" operation to just have a per-file-descriptor pointer to the poll head instead. That gets rid of one of the new indirections. But that doesn't fix the new complexity that is completely unwarranted for the regular case. The (undocumented) reason for the poll() changes was some alleged AIO poll race fixing, but we don't make the common case slower and more complex for some uncommon special case, so this all really needs way more explanations and most likely a fundamental redesign. [ This revert is a revert of about 30 different commits, not reverted individually because that would just be unnecessarily messy - Linus ] Cc: Al Viro Cc: Christoph Hellwig Signed-off-by: Linus Torvalds --- Documentation/filesystems/Locking | 7 +- Documentation/filesystems/vfs.txt | 13 ---- crypto/af_alg.c | 13 +++- crypto/algif_aead.c | 4 +- crypto/algif_skcipher.c | 4 +- drivers/char/random.c | 29 ++++---- drivers/isdn/mISDN/socket.c | 2 +- drivers/net/ppp/pppoe.c | 2 +- fs/aio.c | 148 +------------------------------------- fs/eventfd.c | 19 ++--- fs/eventpoll.c | 15 ++-- fs/pipe.c | 22 +++--- fs/select.c | 23 ------ fs/timerfd.c | 22 +++--- include/crypto/if_alg.h | 3 +- include/linux/fs.h | 2 - include/linux/net.h | 1 - include/linux/poll.h | 12 ++-- include/linux/skbuff.h | 3 +- include/net/bluetooth/bluetooth.h | 2 +- include/net/iucv/af_iucv.h | 2 + include/net/sctp/sctp.h | 3 +- include/net/tcp.h | 3 +- include/net/tls.h | 6 +- include/net/udp.h | 2 +- include/uapi/linux/aio_abi.h | 8 ++- net/appletalk/ddp.c | 2 +- net/atm/common.c | 11 ++- net/atm/common.h | 2 +- net/atm/pvc.c | 2 +- net/atm/svc.c | 2 +- net/ax25/af_ax25.c | 2 +- net/bluetooth/af_bluetooth.c | 7 +- net/bluetooth/hci_sock.c | 2 +- net/bluetooth/l2cap_sock.c | 2 +- net/bluetooth/rfcomm/sock.c | 2 +- net/bluetooth/sco.c | 2 +- net/caif/caif_socket.c | 12 ++-- net/can/bcm.c | 2 +- net/can/raw.c | 2 +- net/core/datagram.c | 13 ++-- net/dccp/dccp.h | 3 +- net/dccp/ipv4.c | 2 +- net/dccp/ipv6.c | 2 +- net/dccp/proto.c | 13 +++- net/decnet/af_decnet.c | 6 +- net/ieee802154/socket.c | 4 +- net/ipv4/af_inet.c | 8 +-- net/ipv4/tcp.c | 23 ++++-- net/ipv4/udp.c | 10 +-- net/ipv6/af_inet6.c | 4 +- net/ipv6/raw.c | 4 +- net/iucv/af_iucv.c | 7 +- net/kcm/kcmsock.c | 10 +-- net/key/af_key.c | 2 +- net/l2tp/l2tp_ip.c | 2 +- net/l2tp/l2tp_ip6.c | 2 +- net/l2tp/l2tp_ppp.c | 2 +- net/llc/af_llc.c | 2 +- net/netlink/af_netlink.c | 2 +- net/netrom/af_netrom.c | 2 +- net/nfc/llcp_sock.c | 9 ++- net/nfc/rawsock.c | 4 +- net/packet/af_packet.c | 9 +-- net/phonet/socket.c | 9 ++- net/qrtr/qrtr.c | 2 +- net/rose/af_rose.c | 2 +- net/rxrpc/af_rxrpc.c | 10 ++- net/sctp/ipv6.c | 2 +- net/sctp/protocol.c | 2 +- net/sctp/socket.c | 4 +- net/smc/af_smc.c | 12 +++- net/socket.c | 48 ++----------- net/tipc/socket.c | 14 ++-- net/tls/tls_main.c | 2 +- net/tls/tls_sw.c | 19 ++--- net/unix/af_unix.c | 30 +++++--- net/vmw_vsock/af_vsock.c | 19 +++-- net/x25/af_x25.c | 2 +- net/xdp/xsk.c | 7 +- 80 files changed, 301 insertions(+), 450 deletions(-) diff --git a/Documentation/filesystems/Locking b/Documentation/filesystems/Locking index 2c391338c675..37bf0a9de75c 100644 --- a/Documentation/filesystems/Locking +++ b/Documentation/filesystems/Locking @@ -441,8 +441,6 @@ prototypes: int (*iterate) (struct file *, struct dir_context *); int (*iterate_shared) (struct file *, struct dir_context *); __poll_t (*poll) (struct file *, struct poll_table_struct *); - struct wait_queue_head * (*get_poll_head)(struct file *, __poll_t); - __poll_t (*poll_mask) (struct file *, __poll_t); long (*unlocked_ioctl) (struct file *, unsigned int, unsigned long); long (*compat_ioctl) (struct file *, unsigned int, unsigned long); int (*mmap) (struct file *, struct vm_area_struct *); @@ -473,7 +471,7 @@ prototypes: }; locking rules: - All except for ->poll_mask may block. + All may block. ->llseek() locking has moved from llseek to the individual llseek implementations. If your fs is not using generic_file_llseek, you @@ -505,9 +503,6 @@ in sys_read() and friends. the lease within the individual filesystem to record the result of the operation -->poll_mask can be called with or without the waitqueue lock for the waitqueue -returned from ->get_poll_head. - --------------------------- dquot_operations ------------------------------- prototypes: int (*write_dquot) (struct dquot *); diff --git a/Documentation/filesystems/vfs.txt b/Documentation/filesystems/vfs.txt index 829a7b7857a4..f608180ad59d 100644 --- a/Documentation/filesystems/vfs.txt +++ b/Documentation/filesystems/vfs.txt @@ -857,8 +857,6 @@ struct file_operations { ssize_t (*write_iter) (struct kiocb *, struct iov_iter *); int (*iterate) (struct file *, struct dir_context *); __poll_t (*poll) (struct file *, struct poll_table_struct *); - struct wait_queue_head * (*get_poll_head)(struct file *, __poll_t); - __poll_t (*poll_mask) (struct file *, __poll_t); long (*unlocked_ioctl) (struct file *, unsigned int, unsigned long); long (*compat_ioctl) (struct file *, unsigned int, unsigned long); int (*mmap) (struct file *, struct vm_area_struct *); @@ -903,17 +901,6 @@ otherwise noted. activity on this file and (optionally) go to sleep until there is activity. Called by the select(2) and poll(2) system calls - get_poll_head: Returns the struct wait_queue_head that callers can - wait on. Callers need to check the returned events using ->poll_mask - once woken. Can return NULL to indicate polling is not supported, - or any error code using the ERR_PTR convention to indicate that a - grave error occured and ->poll_mask shall not be called. - - poll_mask: return the mask of EPOLL* values describing the file descriptor - state. Called either before going to sleep on the waitqueue returned by - get_poll_head, or after it has been woken. If ->get_poll_head and - ->poll_mask are implemented ->poll does not need to be implement. - unlocked_ioctl: called by the ioctl(2) system call. compat_ioctl: called by the ioctl(2) system call when 32 bit system calls diff --git a/crypto/af_alg.c b/crypto/af_alg.c index 49fa8582138b..314c52c967e5 100644 --- a/crypto/af_alg.c +++ b/crypto/af_alg.c @@ -1060,12 +1060,19 @@ void af_alg_async_cb(struct crypto_async_request *_req, int err) } EXPORT_SYMBOL_GPL(af_alg_async_cb); -__poll_t af_alg_poll_mask(struct socket *sock, __poll_t events) +/** + * af_alg_poll - poll system call handler + */ +__poll_t af_alg_poll(struct file *file, struct socket *sock, + poll_table *wait) { struct sock *sk = sock->sk; struct alg_sock *ask = alg_sk(sk); struct af_alg_ctx *ctx = ask->private; - __poll_t mask = 0; + __poll_t mask; + + sock_poll_wait(file, sk_sleep(sk), wait); + mask = 0; if (!ctx->more || ctx->used) mask |= EPOLLIN | EPOLLRDNORM; @@ -1075,7 +1082,7 @@ __poll_t af_alg_poll_mask(struct socket *sock, __poll_t events) return mask; } -EXPORT_SYMBOL_GPL(af_alg_poll_mask); +EXPORT_SYMBOL_GPL(af_alg_poll); /** * af_alg_alloc_areq - allocate struct af_alg_async_req diff --git a/crypto/algif_aead.c b/crypto/algif_aead.c index 825524f27438..c40a8c7ee8ae 100644 --- a/crypto/algif_aead.c +++ b/crypto/algif_aead.c @@ -375,7 +375,7 @@ static struct proto_ops algif_aead_ops = { .sendmsg = aead_sendmsg, .sendpage = af_alg_sendpage, .recvmsg = aead_recvmsg, - .poll_mask = af_alg_poll_mask, + .poll = af_alg_poll, }; static int aead_check_key(struct socket *sock) @@ -471,7 +471,7 @@ static struct proto_ops algif_aead_ops_nokey = { .sendmsg = aead_sendmsg_nokey, .sendpage = aead_sendpage_nokey, .recvmsg = aead_recvmsg_nokey, - .poll_mask = af_alg_poll_mask, + .poll = af_alg_poll, }; static void *aead_bind(const char *name, u32 type, u32 mask) diff --git a/crypto/algif_skcipher.c b/crypto/algif_skcipher.c index 4c04eb9888ad..cfdaab2b7d76 100644 --- a/crypto/algif_skcipher.c +++ b/crypto/algif_skcipher.c @@ -206,7 +206,7 @@ static struct proto_ops algif_skcipher_ops = { .sendmsg = skcipher_sendmsg, .sendpage = af_alg_sendpage, .recvmsg = skcipher_recvmsg, - .poll_mask = af_alg_poll_mask, + .poll = af_alg_poll, }; static int skcipher_check_key(struct socket *sock) @@ -302,7 +302,7 @@ static struct proto_ops algif_skcipher_ops_nokey = { .sendmsg = skcipher_sendmsg_nokey, .sendpage = skcipher_sendpage_nokey, .recvmsg = skcipher_recvmsg_nokey, - .poll_mask = af_alg_poll_mask, + .poll = af_alg_poll, }; static void *skcipher_bind(const char *name, u32 type, u32 mask) diff --git a/drivers/char/random.c b/drivers/char/random.c index a8fb0020ba5c..cd888d4ee605 100644 --- a/drivers/char/random.c +++ b/drivers/char/random.c @@ -402,7 +402,8 @@ static struct poolinfo { /* * Static global variables */ -static DECLARE_WAIT_QUEUE_HEAD(random_wait); +static DECLARE_WAIT_QUEUE_HEAD(random_read_wait); +static DECLARE_WAIT_QUEUE_HEAD(random_write_wait); static struct fasync_struct *fasync; static DEFINE_SPINLOCK(random_ready_list_lock); @@ -721,8 +722,8 @@ retry: /* should we wake readers? */ if (entropy_bits >= random_read_wakeup_bits && - wq_has_sleeper(&random_wait)) { - wake_up_interruptible_poll(&random_wait, POLLIN); + wq_has_sleeper(&random_read_wait)) { + wake_up_interruptible(&random_read_wait); kill_fasync(&fasync, SIGIO, POLL_IN); } /* If the input pool is getting full, send some @@ -1396,7 +1397,7 @@ retry: trace_debit_entropy(r->name, 8 * ibytes); if (ibytes && (r->entropy_count >> ENTROPY_SHIFT) < random_write_wakeup_bits) { - wake_up_interruptible_poll(&random_wait, POLLOUT); + wake_up_interruptible(&random_write_wait); kill_fasync(&fasync, SIGIO, POLL_OUT); } @@ -1838,7 +1839,7 @@ _random_read(int nonblock, char __user *buf, size_t nbytes) if (nonblock) return -EAGAIN; - wait_event_interruptible(random_wait, + wait_event_interruptible(random_read_wait, ENTROPY_BITS(&input_pool) >= random_read_wakeup_bits); if (signal_pending(current)) @@ -1875,17 +1876,14 @@ urandom_read(struct file *file, char __user *buf, size_t nbytes, loff_t *ppos) return ret; } -static struct wait_queue_head * -random_get_poll_head(struct file *file, __poll_t events) -{ - return &random_wait; -} - static __poll_t -random_poll_mask(struct file *file, __poll_t events) +random_poll(struct file *file, poll_table * wait) { - __poll_t mask = 0; + __poll_t mask; + poll_wait(file, &random_read_wait, wait); + poll_wait(file, &random_write_wait, wait); + mask = 0; if (ENTROPY_BITS(&input_pool) >= random_read_wakeup_bits) mask |= EPOLLIN | EPOLLRDNORM; if (ENTROPY_BITS(&input_pool) < random_write_wakeup_bits) @@ -1992,8 +1990,7 @@ static int random_fasync(int fd, struct file *filp, int on) const struct file_operations random_fops = { .read = random_read, .write = random_write, - .get_poll_head = random_get_poll_head, - .poll_mask = random_poll_mask, + .poll = random_poll, .unlocked_ioctl = random_ioctl, .fasync = random_fasync, .llseek = noop_llseek, @@ -2326,7 +2323,7 @@ void add_hwgenerator_randomness(const char *buffer, size_t count, * We'll be woken up again once below random_write_wakeup_thresh, * or when the calling thread is about to terminate. */ - wait_event_interruptible(random_wait, kthread_should_stop() || + wait_event_interruptible(random_write_wait, kthread_should_stop() || ENTROPY_BITS(&input_pool) <= random_write_wakeup_bits); mix_pool_bytes(poolp, buffer, count); credit_entropy_bits(poolp, entropy); diff --git a/drivers/isdn/mISDN/socket.c b/drivers/isdn/mISDN/socket.c index 98f90aadd141..18c0a1281914 100644 --- a/drivers/isdn/mISDN/socket.c +++ b/drivers/isdn/mISDN/socket.c @@ -588,7 +588,7 @@ static const struct proto_ops data_sock_ops = { .getname = data_sock_getname, .sendmsg = mISDN_sock_sendmsg, .recvmsg = mISDN_sock_recvmsg, - .poll_mask = datagram_poll_mask, + .poll = datagram_poll, .listen = sock_no_listen, .shutdown = sock_no_shutdown, .setsockopt = data_sock_setsockopt, diff --git a/drivers/net/ppp/pppoe.c b/drivers/net/ppp/pppoe.c index de51e8f70f44..ce61231e96ea 100644 --- a/drivers/net/ppp/pppoe.c +++ b/drivers/net/ppp/pppoe.c @@ -1107,7 +1107,7 @@ static const struct proto_ops pppoe_ops = { .socketpair = sock_no_socketpair, .accept = sock_no_accept, .getname = pppoe_getname, - .poll_mask = datagram_poll_mask, + .poll = datagram_poll, .listen = sock_no_listen, .shutdown = sock_no_shutdown, .setsockopt = sock_no_setsockopt, diff --git a/fs/aio.c b/fs/aio.c index e1d20124ec0e..210df9da1283 100644 --- a/fs/aio.c +++ b/fs/aio.c @@ -5,7 +5,6 @@ * Implements an efficient asynchronous io interface. * * Copyright 2000, 2001, 2002 Red Hat, Inc. All Rights Reserved. - * Copyright 2018 Christoph Hellwig. * * See ../COPYING for licensing terms. */ @@ -165,22 +164,10 @@ struct fsync_iocb { bool datasync; }; -struct poll_iocb { - struct file *file; - __poll_t events; - struct wait_queue_head *head; - - union { - struct wait_queue_entry wait; - struct work_struct work; - }; -}; - struct aio_kiocb { union { struct kiocb rw; struct fsync_iocb fsync; - struct poll_iocb poll; }; struct kioctx *ki_ctx; @@ -1590,6 +1577,7 @@ static int aio_fsync(struct fsync_iocb *req, struct iocb *iocb, bool datasync) if (unlikely(iocb->aio_buf || iocb->aio_offset || iocb->aio_nbytes || iocb->aio_rw_flags)) return -EINVAL; + req->file = fget(iocb->aio_fildes); if (unlikely(!req->file)) return -EBADF; @@ -1604,137 +1592,6 @@ static int aio_fsync(struct fsync_iocb *req, struct iocb *iocb, bool datasync) return 0; } -/* need to use list_del_init so we can check if item was present */ -static inline bool __aio_poll_remove(struct poll_iocb *req) -{ - if (list_empty(&req->wait.entry)) - return false; - list_del_init(&req->wait.entry); - return true; -} - -static inline void __aio_poll_complete(struct aio_kiocb *iocb, __poll_t mask) -{ - fput(iocb->poll.file); - aio_complete(iocb, mangle_poll(mask), 0); -} - -static void aio_poll_work(struct work_struct *work) -{ - struct aio_kiocb *iocb = container_of(work, struct aio_kiocb, poll.work); - - if (!list_empty_careful(&iocb->ki_list)) - aio_remove_iocb(iocb); - __aio_poll_complete(iocb, iocb->poll.events); -} - -static int aio_poll_cancel(struct kiocb *iocb) -{ - struct aio_kiocb *aiocb = container_of(iocb, struct aio_kiocb, rw); - struct poll_iocb *req = &aiocb->poll; - struct wait_queue_head *head = req->head; - bool found = false; - - spin_lock(&head->lock); - found = __aio_poll_remove(req); - spin_unlock(&head->lock); - - if (found) { - req->events = 0; - INIT_WORK(&req->work, aio_poll_work); - schedule_work(&req->work); - } - return 0; -} - -static int aio_poll_wake(struct wait_queue_entry *wait, unsigned mode, int sync, - void *key) -{ - struct poll_iocb *req = container_of(wait, struct poll_iocb, wait); - struct aio_kiocb *iocb = container_of(req, struct aio_kiocb, poll); - struct file *file = req->file; - __poll_t mask = key_to_poll(key); - - assert_spin_locked(&req->head->lock); - - /* for instances that support it check for an event match first: */ - if (mask && !(mask & req->events)) - return 0; - - mask = file->f_op->poll_mask(file, req->events) & req->events; - if (!mask) - return 0; - - __aio_poll_remove(req); - - /* - * Try completing without a context switch if we can acquire ctx_lock - * without spinning. Otherwise we need to defer to a workqueue to - * avoid a deadlock due to the lock order. - */ - if (spin_trylock(&iocb->ki_ctx->ctx_lock)) { - list_del_init(&iocb->ki_list); - spin_unlock(&iocb->ki_ctx->ctx_lock); - - __aio_poll_complete(iocb, mask); - } else { - req->events = mask; - INIT_WORK(&req->work, aio_poll_work); - schedule_work(&req->work); - } - - return 1; -} - -static ssize_t aio_poll(struct aio_kiocb *aiocb, struct iocb *iocb) -{ - struct kioctx *ctx = aiocb->ki_ctx; - struct poll_iocb *req = &aiocb->poll; - __poll_t mask; - - /* reject any unknown events outside the normal event mask. */ - if ((u16)iocb->aio_buf != iocb->aio_buf) - return -EINVAL; - /* reject fields that are not defined for poll */ - if (iocb->aio_offset || iocb->aio_nbytes || iocb->aio_rw_flags) - return -EINVAL; - - req->events = demangle_poll(iocb->aio_buf) | EPOLLERR | EPOLLHUP; - req->file = fget(iocb->aio_fildes); - if (unlikely(!req->file)) - return -EBADF; - if (!file_has_poll_mask(req->file)) - goto out_fail; - - req->head = req->file->f_op->get_poll_head(req->file, req->events); - if (!req->head) - goto out_fail; - if (IS_ERR(req->head)) { - mask = EPOLLERR; - goto done; - } - - init_waitqueue_func_entry(&req->wait, aio_poll_wake); - aiocb->ki_cancel = aio_poll_cancel; - - spin_lock_irq(&ctx->ctx_lock); - spin_lock(&req->head->lock); - mask = req->file->f_op->poll_mask(req->file, req->events) & req->events; - if (!mask) { - __add_wait_queue(req->head, &req->wait); - list_add_tail(&aiocb->ki_list, &ctx->active_reqs); - } - spin_unlock(&req->head->lock); - spin_unlock_irq(&ctx->ctx_lock); -done: - if (mask) - __aio_poll_complete(aiocb, mask); - return 0; -out_fail: - fput(req->file); - return -EINVAL; /* same as no support for IOCB_CMD_POLL */ -} - static int io_submit_one(struct kioctx *ctx, struct iocb __user *user_iocb, bool compat) { @@ -1808,9 +1665,6 @@ static int io_submit_one(struct kioctx *ctx, struct iocb __user *user_iocb, case IOCB_CMD_FDSYNC: ret = aio_fsync(&req->fsync, &iocb, true); break; - case IOCB_CMD_POLL: - ret = aio_poll(req, &iocb); - break; default: pr_debug("invalid aio operation %d\n", iocb.aio_lio_opcode); ret = -EINVAL; diff --git a/fs/eventfd.c b/fs/eventfd.c index ceb1031f1cac..08d3bd602f73 100644 --- a/fs/eventfd.c +++ b/fs/eventfd.c @@ -101,20 +101,14 @@ static int eventfd_release(struct inode *inode, struct file *file) return 0; } -static struct wait_queue_head * -eventfd_get_poll_head(struct file *file, __poll_t events) -{ - struct eventfd_ctx *ctx = file->private_data; - - return &ctx->wqh; -} - -static __poll_t eventfd_poll_mask(struct file *file, __poll_t eventmask) +static __poll_t eventfd_poll(struct file *file, poll_table *wait) { struct eventfd_ctx *ctx = file->private_data; __poll_t events = 0; u64 count; + poll_wait(file, &ctx->wqh, wait); + /* * All writes to ctx->count occur within ctx->wqh.lock. This read * can be done outside ctx->wqh.lock because we know that poll_wait @@ -156,11 +150,11 @@ static __poll_t eventfd_poll_mask(struct file *file, __poll_t eventmask) count = READ_ONCE(ctx->count); if (count > 0) - events |= (EPOLLIN & eventmask); + events |= EPOLLIN; if (count == ULLONG_MAX) events |= EPOLLERR; if (ULLONG_MAX - 1 > count) - events |= (EPOLLOUT & eventmask); + events |= EPOLLOUT; return events; } @@ -311,8 +305,7 @@ static const struct file_operations eventfd_fops = { .show_fdinfo = eventfd_show_fdinfo, #endif .release = eventfd_release, - .get_poll_head = eventfd_get_poll_head, - .poll_mask = eventfd_poll_mask, + .poll = eventfd_poll, .read = eventfd_read, .write = eventfd_write, .llseek = noop_llseek, diff --git a/fs/eventpoll.c b/fs/eventpoll.c index ea4436f409fb..67db22fe99c5 100644 --- a/fs/eventpoll.c +++ b/fs/eventpoll.c @@ -922,18 +922,14 @@ static __poll_t ep_read_events_proc(struct eventpoll *ep, struct list_head *head return 0; } -static struct wait_queue_head *ep_eventpoll_get_poll_head(struct file *file, - __poll_t eventmask) -{ - struct eventpoll *ep = file->private_data; - return &ep->poll_wait; -} - -static __poll_t ep_eventpoll_poll_mask(struct file *file, __poll_t eventmask) +static __poll_t ep_eventpoll_poll(struct file *file, poll_table *wait) { struct eventpoll *ep = file->private_data; int depth = 0; + /* Insert inside our poll wait queue */ + poll_wait(file, &ep->poll_wait, wait); + /* * Proceed to find out if wanted events are really available inside * the ready list. @@ -972,8 +968,7 @@ static const struct file_operations eventpoll_fops = { .show_fdinfo = ep_show_fdinfo, #endif .release = ep_eventpoll_release, - .get_poll_head = ep_eventpoll_get_poll_head, - .poll_mask = ep_eventpoll_poll_mask, + .poll = ep_eventpoll_poll, .llseek = noop_llseek, }; diff --git a/fs/pipe.c b/fs/pipe.c index bb0840e234f3..39d6f431da83 100644 --- a/fs/pipe.c +++ b/fs/pipe.c @@ -509,22 +509,19 @@ static long pipe_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) } } -static struct wait_queue_head * -pipe_get_poll_head(struct file *filp, __poll_t events) -{ - struct pipe_inode_info *pipe = filp->private_data; - - return &pipe->wait; -} - /* No kernel lock held - fine */ -static __poll_t pipe_poll_mask(struct file *filp, __poll_t events) +static __poll_t +pipe_poll(struct file *filp, poll_table *wait) { + __poll_t mask; struct pipe_inode_info *pipe = filp->private_data; - int nrbufs = pipe->nrbufs; - __poll_t mask = 0; + int nrbufs; + + poll_wait(filp, &pipe->wait, wait); /* Reading only -- no need for acquiring the semaphore. */ + nrbufs = pipe->nrbufs; + mask = 0; if (filp->f_mode & FMODE_READ) { mask = (nrbufs > 0) ? EPOLLIN | EPOLLRDNORM : 0; if (!pipe->writers && filp->f_version != pipe->w_counter) @@ -1023,8 +1020,7 @@ const struct file_operations pipefifo_fops = { .llseek = no_llseek, .read_iter = pipe_read, .write_iter = pipe_write, - .get_poll_head = pipe_get_poll_head, - .poll_mask = pipe_poll_mask, + .poll = pipe_poll, .unlocked_ioctl = pipe_ioctl, .release = pipe_release, .fasync = pipe_fasync, diff --git a/fs/select.c b/fs/select.c index 317891ff8165..4a6b6e4b21cb 100644 --- a/fs/select.c +++ b/fs/select.c @@ -34,29 +34,6 @@ #include -__poll_t vfs_poll(struct file *file, struct poll_table_struct *pt) -{ - if (file->f_op->poll) { - return file->f_op->poll(file, pt); - } else if (file_has_poll_mask(file)) { - unsigned int events = poll_requested_events(pt); - struct wait_queue_head *head; - - if (pt && pt->_qproc) { - head = file->f_op->get_poll_head(file, events); - if (!head) - return DEFAULT_POLLMASK; - if (IS_ERR(head)) - return EPOLLERR; - pt->_qproc(file, head, pt); - } - - return file->f_op->poll_mask(file, events); - } else { - return DEFAULT_POLLMASK; - } -} -EXPORT_SYMBOL_GPL(vfs_poll); /* * Estimate expected accuracy in ns from a timeval. diff --git a/fs/timerfd.c b/fs/timerfd.c index d84a2bee4f82..cdad49da3ff7 100644 --- a/fs/timerfd.c +++ b/fs/timerfd.c @@ -226,20 +226,21 @@ static int timerfd_release(struct inode *inode, struct file *file) kfree_rcu(ctx, rcu); return 0; } - -static struct wait_queue_head *timerfd_get_poll_head(struct file *file, - __poll_t eventmask) + +static __poll_t timerfd_poll(struct file *file, poll_table *wait) { struct timerfd_ctx *ctx = file->private_data; + __poll_t events = 0; + unsigned long flags; - return &ctx->wqh; -} + poll_wait(file, &ctx->wqh, wait); -static __poll_t timerfd_poll_mask(struct file *file, __poll_t eventmask) -{ - struct timerfd_ctx *ctx = file->private_data; + spin_lock_irqsave(&ctx->wqh.lock, flags); + if (ctx->ticks) + events |= EPOLLIN; + spin_unlock_irqrestore(&ctx->wqh.lock, flags); - return ctx->ticks ? EPOLLIN : 0; + return events; } static ssize_t timerfd_read(struct file *file, char __user *buf, size_t count, @@ -363,8 +364,7 @@ static long timerfd_ioctl(struct file *file, unsigned int cmd, unsigned long arg static const struct file_operations timerfd_fops = { .release = timerfd_release, - .get_poll_head = timerfd_get_poll_head, - .poll_mask = timerfd_poll_mask, + .poll = timerfd_poll, .read = timerfd_read, .llseek = noop_llseek, .show_fdinfo = timerfd_show, diff --git a/include/crypto/if_alg.h b/include/crypto/if_alg.h index cc414db9da0a..482461d8931d 100644 --- a/include/crypto/if_alg.h +++ b/include/crypto/if_alg.h @@ -245,7 +245,8 @@ ssize_t af_alg_sendpage(struct socket *sock, struct page *page, int offset, size_t size, int flags); void af_alg_free_resources(struct af_alg_async_req *areq); void af_alg_async_cb(struct crypto_async_request *_req, int err); -__poll_t af_alg_poll_mask(struct socket *sock, __poll_t events); +__poll_t af_alg_poll(struct file *file, struct socket *sock, + poll_table *wait); struct af_alg_async_req *af_alg_alloc_areq(struct sock *sk, unsigned int areqlen); int af_alg_get_rsgl(struct sock *sk, struct msghdr *msg, int flags, diff --git a/include/linux/fs.h b/include/linux/fs.h index 5c91108846db..d78d146a98da 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -1720,8 +1720,6 @@ struct file_operations { int (*iterate) (struct file *, struct dir_context *); int (*iterate_shared) (struct file *, struct dir_context *); __poll_t (*poll) (struct file *, struct poll_table_struct *); - struct wait_queue_head * (*get_poll_head)(struct file *, __poll_t); - __poll_t (*poll_mask) (struct file *, __poll_t); long (*unlocked_ioctl) (struct file *, unsigned int, unsigned long); long (*compat_ioctl) (struct file *, unsigned int, unsigned long); int (*mmap) (struct file *, struct vm_area_struct *); diff --git a/include/linux/net.h b/include/linux/net.h index 08b6eb964dd6..6554d3ba4396 100644 --- a/include/linux/net.h +++ b/include/linux/net.h @@ -147,7 +147,6 @@ struct proto_ops { int (*getname) (struct socket *sock, struct sockaddr *addr, int peer); - __poll_t (*poll_mask) (struct socket *sock, __poll_t events); __poll_t (*poll) (struct file *file, struct socket *sock, struct poll_table_struct *wait); int (*ioctl) (struct socket *sock, unsigned int cmd, diff --git a/include/linux/poll.h b/include/linux/poll.h index fdf86b4cbc71..7e0fdcf905d2 100644 --- a/include/linux/poll.h +++ b/include/linux/poll.h @@ -74,18 +74,18 @@ static inline void init_poll_funcptr(poll_table *pt, poll_queue_proc qproc) pt->_key = ~(__poll_t)0; /* all events enabled */ } -static inline bool file_has_poll_mask(struct file *file) +static inline bool file_can_poll(struct file *file) { - return file->f_op->get_poll_head && file->f_op->poll_mask; + return file->f_op->poll; } -static inline bool file_can_poll(struct file *file) +static inline __poll_t vfs_poll(struct file *file, struct poll_table_struct *pt) { - return file->f_op->poll || file_has_poll_mask(file); + if (unlikely(!file->f_op->poll)) + return DEFAULT_POLLMASK; + return file->f_op->poll(file, pt); } -__poll_t vfs_poll(struct file *file, struct poll_table_struct *pt); - struct poll_table_entry { struct file *filp; __poll_t key; diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index c86885954994..164cdedf6012 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -3252,7 +3252,8 @@ struct sk_buff *__skb_recv_datagram(struct sock *sk, unsigned flags, int *peeked, int *off, int *err); struct sk_buff *skb_recv_datagram(struct sock *sk, unsigned flags, int noblock, int *err); -__poll_t datagram_poll_mask(struct socket *sock, __poll_t events); +__poll_t datagram_poll(struct file *file, struct socket *sock, + struct poll_table_struct *wait); int skb_copy_datagram_iter(const struct sk_buff *from, int offset, struct iov_iter *to, int size); static inline int skb_copy_datagram_msg(const struct sk_buff *from, int offset, diff --git a/include/net/bluetooth/bluetooth.h b/include/net/bluetooth/bluetooth.h index 53ce8176c313..ec9d6bc65855 100644 --- a/include/net/bluetooth/bluetooth.h +++ b/include/net/bluetooth/bluetooth.h @@ -271,7 +271,7 @@ int bt_sock_recvmsg(struct socket *sock, struct msghdr *msg, size_t len, int flags); int bt_sock_stream_recvmsg(struct socket *sock, struct msghdr *msg, size_t len, int flags); -__poll_t bt_sock_poll_mask(struct socket *sock, __poll_t events); +__poll_t bt_sock_poll(struct file *file, struct socket *sock, poll_table *wait); int bt_sock_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg); int bt_sock_wait_state(struct sock *sk, int state, unsigned long timeo); int bt_sock_wait_ready(struct sock *sk, unsigned long flags); diff --git a/include/net/iucv/af_iucv.h b/include/net/iucv/af_iucv.h index b0eaeb02d46d..f4c21b5a1242 100644 --- a/include/net/iucv/af_iucv.h +++ b/include/net/iucv/af_iucv.h @@ -153,6 +153,8 @@ struct iucv_sock_list { atomic_t autobind_name; }; +__poll_t iucv_sock_poll(struct file *file, struct socket *sock, + poll_table *wait); void iucv_sock_link(struct iucv_sock_list *l, struct sock *s); void iucv_sock_unlink(struct iucv_sock_list *l, struct sock *s); void iucv_accept_enqueue(struct sock *parent, struct sock *sk); diff --git a/include/net/sctp/sctp.h b/include/net/sctp/sctp.h index 30b3e2fe240a..8c2caa370e0f 100644 --- a/include/net/sctp/sctp.h +++ b/include/net/sctp/sctp.h @@ -109,7 +109,8 @@ int sctp_backlog_rcv(struct sock *sk, struct sk_buff *skb); int sctp_inet_listen(struct socket *sock, int backlog); void sctp_write_space(struct sock *sk); void sctp_data_ready(struct sock *sk); -__poll_t sctp_poll_mask(struct socket *sock, __poll_t events); +__poll_t sctp_poll(struct file *file, struct socket *sock, + poll_table *wait); void sctp_sock_rfree(struct sk_buff *skb); void sctp_copy_sock(struct sock *newsk, struct sock *sk, struct sctp_association *asoc); diff --git a/include/net/tcp.h b/include/net/tcp.h index 0448e7c5d2b4..800582b5dd54 100644 --- a/include/net/tcp.h +++ b/include/net/tcp.h @@ -388,7 +388,8 @@ bool tcp_peer_is_proven(struct request_sock *req, struct dst_entry *dst); void tcp_close(struct sock *sk, long timeout); void tcp_init_sock(struct sock *sk); void tcp_init_transfer(struct sock *sk, int bpf_op); -__poll_t tcp_poll_mask(struct socket *sock, __poll_t events); +__poll_t tcp_poll(struct file *file, struct socket *sock, + struct poll_table_struct *wait); int tcp_getsockopt(struct sock *sk, int level, int optname, char __user *optval, int __user *optlen); int tcp_setsockopt(struct sock *sk, int level, int optname, diff --git a/include/net/tls.h b/include/net/tls.h index 7f84ea3e217c..70c273777fe9 100644 --- a/include/net/tls.h +++ b/include/net/tls.h @@ -109,7 +109,8 @@ struct tls_sw_context_rx { struct strparser strp; void (*saved_data_ready)(struct sock *sk); - __poll_t (*sk_poll_mask)(struct socket *sock, __poll_t events); + unsigned int (*sk_poll)(struct file *file, struct socket *sock, + struct poll_table_struct *wait); struct sk_buff *recv_pkt; u8 control; bool decrypted; @@ -224,7 +225,8 @@ void tls_sw_free_resources_tx(struct sock *sk); void tls_sw_free_resources_rx(struct sock *sk); int tls_sw_recvmsg(struct sock *sk, struct msghdr *msg, size_t len, int nonblock, int flags, int *addr_len); -__poll_t tls_sw_poll_mask(struct socket *sock, __poll_t events); +unsigned int tls_sw_poll(struct file *file, struct socket *sock, + struct poll_table_struct *wait); ssize_t tls_sw_splice_read(struct socket *sock, loff_t *ppos, struct pipe_inode_info *pipe, size_t len, unsigned int flags); diff --git a/include/net/udp.h b/include/net/udp.h index b1ea8b0f5e6a..81afdacd4fff 100644 --- a/include/net/udp.h +++ b/include/net/udp.h @@ -285,7 +285,7 @@ int udp_init_sock(struct sock *sk); int udp_pre_connect(struct sock *sk, struct sockaddr *uaddr, int addr_len); int __udp_disconnect(struct sock *sk, int flags); int udp_disconnect(struct sock *sk, int flags); -__poll_t udp_poll_mask(struct socket *sock, __poll_t events); +__poll_t udp_poll(struct file *file, struct socket *sock, poll_table *wait); struct sk_buff *skb_udp_tunnel_segment(struct sk_buff *skb, netdev_features_t features, bool is_ipv6); diff --git a/include/uapi/linux/aio_abi.h b/include/uapi/linux/aio_abi.h index d00221345c19..d4e768d55d14 100644 --- a/include/uapi/linux/aio_abi.h +++ b/include/uapi/linux/aio_abi.h @@ -39,8 +39,10 @@ enum { IOCB_CMD_PWRITE = 1, IOCB_CMD_FSYNC = 2, IOCB_CMD_FDSYNC = 3, - /* 4 was the experimental IOCB_CMD_PREADX */ - IOCB_CMD_POLL = 5, + /* These two are experimental. + * IOCB_CMD_PREADX = 4, + * IOCB_CMD_POLL = 5, + */ IOCB_CMD_NOOP = 6, IOCB_CMD_PREADV = 7, IOCB_CMD_PWRITEV = 8, @@ -109,7 +111,7 @@ struct iocb { #undef IFLITTLE struct __aio_sigset { - const sigset_t __user *sigmask; + sigset_t __user *sigmask; size_t sigsetsize; }; diff --git a/net/appletalk/ddp.c b/net/appletalk/ddp.c index 55fdba05d7d9..9b6bc5abe946 100644 --- a/net/appletalk/ddp.c +++ b/net/appletalk/ddp.c @@ -1869,7 +1869,7 @@ static const struct proto_ops atalk_dgram_ops = { .socketpair = sock_no_socketpair, .accept = sock_no_accept, .getname = atalk_getname, - .poll_mask = datagram_poll_mask, + .poll = datagram_poll, .ioctl = atalk_ioctl, #ifdef CONFIG_COMPAT .compat_ioctl = atalk_compat_ioctl, diff --git a/net/atm/common.c b/net/atm/common.c index ff5748b2190f..a7a68e509628 100644 --- a/net/atm/common.c +++ b/net/atm/common.c @@ -647,11 +647,16 @@ out: return error; } -__poll_t vcc_poll_mask(struct socket *sock, __poll_t events) +__poll_t vcc_poll(struct file *file, struct socket *sock, poll_table *wait) { struct sock *sk = sock->sk; - struct atm_vcc *vcc = ATM_SD(sock); - __poll_t mask = 0; + struct atm_vcc *vcc; + __poll_t mask; + + sock_poll_wait(file, sk_sleep(sk), wait); + mask = 0; + + vcc = ATM_SD(sock); /* exceptional events */ if (sk->sk_err) diff --git a/net/atm/common.h b/net/atm/common.h index 526796ad230f..5850649068bb 100644 --- a/net/atm/common.h +++ b/net/atm/common.h @@ -17,7 +17,7 @@ int vcc_connect(struct socket *sock, int itf, short vpi, int vci); int vcc_recvmsg(struct socket *sock, struct msghdr *msg, size_t size, int flags); int vcc_sendmsg(struct socket *sock, struct msghdr *m, size_t total_len); -__poll_t vcc_poll_mask(struct socket *sock, __poll_t events); +__poll_t vcc_poll(struct file *file, struct socket *sock, poll_table *wait); int vcc_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg); int vcc_compat_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg); int vcc_setsockopt(struct socket *sock, int level, int optname, diff --git a/net/atm/pvc.c b/net/atm/pvc.c index 9f75092fe778..2cb10af16afc 100644 --- a/net/atm/pvc.c +++ b/net/atm/pvc.c @@ -113,7 +113,7 @@ static const struct proto_ops pvc_proto_ops = { .socketpair = sock_no_socketpair, .accept = sock_no_accept, .getname = pvc_getname, - .poll_mask = vcc_poll_mask, + .poll = vcc_poll, .ioctl = vcc_ioctl, #ifdef CONFIG_COMPAT .compat_ioctl = vcc_compat_ioctl, diff --git a/net/atm/svc.c b/net/atm/svc.c index 53f4ad7087b1..2f91b766ac42 100644 --- a/net/atm/svc.c +++ b/net/atm/svc.c @@ -636,7 +636,7 @@ static const struct proto_ops svc_proto_ops = { .socketpair = sock_no_socketpair, .accept = svc_accept, .getname = svc_getname, - .poll_mask = vcc_poll_mask, + .poll = vcc_poll, .ioctl = svc_ioctl, #ifdef CONFIG_COMPAT .compat_ioctl = svc_compat_ioctl, diff --git a/net/ax25/af_ax25.c b/net/ax25/af_ax25.c index d1d2442ce573..c603d33d5410 100644 --- a/net/ax25/af_ax25.c +++ b/net/ax25/af_ax25.c @@ -1941,7 +1941,7 @@ static const struct proto_ops ax25_proto_ops = { .socketpair = sock_no_socketpair, .accept = ax25_accept, .getname = ax25_getname, - .poll_mask = datagram_poll_mask, + .poll = datagram_poll, .ioctl = ax25_ioctl, .listen = ax25_listen, .shutdown = ax25_shutdown, diff --git a/net/bluetooth/af_bluetooth.c b/net/bluetooth/af_bluetooth.c index 510ab4f55df5..3264e1873219 100644 --- a/net/bluetooth/af_bluetooth.c +++ b/net/bluetooth/af_bluetooth.c @@ -437,13 +437,16 @@ static inline __poll_t bt_accept_poll(struct sock *parent) return 0; } -__poll_t bt_sock_poll_mask(struct socket *sock, __poll_t events) +__poll_t bt_sock_poll(struct file *file, struct socket *sock, + poll_table *wait) { struct sock *sk = sock->sk; __poll_t mask = 0; BT_DBG("sock %p, sk %p", sock, sk); + poll_wait(file, sk_sleep(sk), wait); + if (sk->sk_state == BT_LISTEN) return bt_accept_poll(sk); @@ -475,7 +478,7 @@ __poll_t bt_sock_poll_mask(struct socket *sock, __poll_t events) return mask; } -EXPORT_SYMBOL(bt_sock_poll_mask); +EXPORT_SYMBOL(bt_sock_poll); int bt_sock_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg) { diff --git a/net/bluetooth/hci_sock.c b/net/bluetooth/hci_sock.c index d6c099861538..1506e1632394 100644 --- a/net/bluetooth/hci_sock.c +++ b/net/bluetooth/hci_sock.c @@ -1975,7 +1975,7 @@ static const struct proto_ops hci_sock_ops = { .sendmsg = hci_sock_sendmsg, .recvmsg = hci_sock_recvmsg, .ioctl = hci_sock_ioctl, - .poll_mask = datagram_poll_mask, + .poll = datagram_poll, .listen = sock_no_listen, .shutdown = sock_no_shutdown, .setsockopt = hci_sock_setsockopt, diff --git a/net/bluetooth/l2cap_sock.c b/net/bluetooth/l2cap_sock.c index 742a190034e6..686bdc6b35b0 100644 --- a/net/bluetooth/l2cap_sock.c +++ b/net/bluetooth/l2cap_sock.c @@ -1653,7 +1653,7 @@ static const struct proto_ops l2cap_sock_ops = { .getname = l2cap_sock_getname, .sendmsg = l2cap_sock_sendmsg, .recvmsg = l2cap_sock_recvmsg, - .poll_mask = bt_sock_poll_mask, + .poll = bt_sock_poll, .ioctl = bt_sock_ioctl, .mmap = sock_no_mmap, .socketpair = sock_no_socketpair, diff --git a/net/bluetooth/rfcomm/sock.c b/net/bluetooth/rfcomm/sock.c index 1cf57622473a..d606e9212291 100644 --- a/net/bluetooth/rfcomm/sock.c +++ b/net/bluetooth/rfcomm/sock.c @@ -1049,7 +1049,7 @@ static const struct proto_ops rfcomm_sock_ops = { .setsockopt = rfcomm_sock_setsockopt, .getsockopt = rfcomm_sock_getsockopt, .ioctl = rfcomm_sock_ioctl, - .poll_mask = bt_sock_poll_mask, + .poll = bt_sock_poll, .socketpair = sock_no_socketpair, .mmap = sock_no_mmap }; diff --git a/net/bluetooth/sco.c b/net/bluetooth/sco.c index d60dbc61d170..413b8ee49fec 100644 --- a/net/bluetooth/sco.c +++ b/net/bluetooth/sco.c @@ -1197,7 +1197,7 @@ static const struct proto_ops sco_sock_ops = { .getname = sco_sock_getname, .sendmsg = sco_sock_sendmsg, .recvmsg = sco_sock_recvmsg, - .poll_mask = bt_sock_poll_mask, + .poll = bt_sock_poll, .ioctl = bt_sock_ioctl, .mmap = sock_no_mmap, .socketpair = sock_no_socketpair, diff --git a/net/caif/caif_socket.c b/net/caif/caif_socket.c index c7991867d622..a6fb1b3bcad9 100644 --- a/net/caif/caif_socket.c +++ b/net/caif/caif_socket.c @@ -934,11 +934,15 @@ static int caif_release(struct socket *sock) } /* Copied from af_unix.c:unix_poll(), added CAIF tx_flow handling */ -static __poll_t caif_poll_mask(struct socket *sock, __poll_t events) +static __poll_t caif_poll(struct file *file, + struct socket *sock, poll_table *wait) { struct sock *sk = sock->sk; + __poll_t mask; struct caifsock *cf_sk = container_of(sk, struct caifsock, sk); - __poll_t mask = 0; + + sock_poll_wait(file, sk_sleep(sk), wait); + mask = 0; /* exceptional events? */ if (sk->sk_err) @@ -972,7 +976,7 @@ static const struct proto_ops caif_seqpacket_ops = { .socketpair = sock_no_socketpair, .accept = sock_no_accept, .getname = sock_no_getname, - .poll_mask = caif_poll_mask, + .poll = caif_poll, .ioctl = sock_no_ioctl, .listen = sock_no_listen, .shutdown = sock_no_shutdown, @@ -993,7 +997,7 @@ static const struct proto_ops caif_stream_ops = { .socketpair = sock_no_socketpair, .accept = sock_no_accept, .getname = sock_no_getname, - .poll_mask = caif_poll_mask, + .poll = caif_poll, .ioctl = sock_no_ioctl, .listen = sock_no_listen, .shutdown = sock_no_shutdown, diff --git a/net/can/bcm.c b/net/can/bcm.c index 9393f25df08d..0af8f0db892a 100644 --- a/net/can/bcm.c +++ b/net/can/bcm.c @@ -1660,7 +1660,7 @@ static const struct proto_ops bcm_ops = { .socketpair = sock_no_socketpair, .accept = sock_no_accept, .getname = sock_no_getname, - .poll_mask = datagram_poll_mask, + .poll = datagram_poll, .ioctl = can_ioctl, /* use can_ioctl() from af_can.c */ .listen = sock_no_listen, .shutdown = sock_no_shutdown, diff --git a/net/can/raw.c b/net/can/raw.c index fd7e2f49ea6a..1051eee82581 100644 --- a/net/can/raw.c +++ b/net/can/raw.c @@ -843,7 +843,7 @@ static const struct proto_ops raw_ops = { .socketpair = sock_no_socketpair, .accept = sock_no_accept, .getname = raw_getname, - .poll_mask = datagram_poll_mask, + .poll = datagram_poll, .ioctl = can_ioctl, /* use can_ioctl() from af_can.c */ .listen = sock_no_listen, .shutdown = sock_no_shutdown, diff --git a/net/core/datagram.c b/net/core/datagram.c index f19bf3dc2bd6..9938952c5c78 100644 --- a/net/core/datagram.c +++ b/net/core/datagram.c @@ -819,8 +819,9 @@ EXPORT_SYMBOL(skb_copy_and_csum_datagram_msg); /** * datagram_poll - generic datagram poll + * @file: file struct * @sock: socket - * @events to wait for + * @wait: poll table * * Datagram poll: Again totally generic. This also handles * sequenced packet sockets providing the socket receive queue @@ -830,10 +831,14 @@ EXPORT_SYMBOL(skb_copy_and_csum_datagram_msg); * and you use a different write policy from sock_writeable() * then please supply your own write_space callback. */ -__poll_t datagram_poll_mask(struct socket *sock, __poll_t events) +__poll_t datagram_poll(struct file *file, struct socket *sock, + poll_table *wait) { struct sock *sk = sock->sk; - __poll_t mask = 0; + __poll_t mask; + + sock_poll_wait(file, sk_sleep(sk), wait); + mask = 0; /* exceptional events? */ if (sk->sk_err || !skb_queue_empty(&sk->sk_error_queue)) @@ -866,4 +871,4 @@ __poll_t datagram_poll_mask(struct socket *sock, __poll_t events) return mask; } -EXPORT_SYMBOL(datagram_poll_mask); +EXPORT_SYMBOL(datagram_poll); diff --git a/net/dccp/dccp.h b/net/dccp/dccp.h index 0ea2ee56ac1b..f91e3816806b 100644 --- a/net/dccp/dccp.h +++ b/net/dccp/dccp.h @@ -316,7 +316,8 @@ int dccp_recvmsg(struct sock *sk, struct msghdr *msg, size_t len, int nonblock, int flags, int *addr_len); void dccp_shutdown(struct sock *sk, int how); int inet_dccp_listen(struct socket *sock, int backlog); -__poll_t dccp_poll_mask(struct socket *sock, __poll_t events); +__poll_t dccp_poll(struct file *file, struct socket *sock, + poll_table *wait); int dccp_v4_connect(struct sock *sk, struct sockaddr *uaddr, int addr_len); void dccp_req_err(struct sock *sk, u64 seq); diff --git a/net/dccp/ipv4.c b/net/dccp/ipv4.c index a9e478cd3787..b08feb219b44 100644 --- a/net/dccp/ipv4.c +++ b/net/dccp/ipv4.c @@ -984,7 +984,7 @@ static const struct proto_ops inet_dccp_ops = { .accept = inet_accept, .getname = inet_getname, /* FIXME: work on tcp_poll to rename it to inet_csk_poll */ - .poll_mask = dccp_poll_mask, + .poll = dccp_poll, .ioctl = inet_ioctl, /* FIXME: work on inet_listen to rename it to sock_common_listen */ .listen = inet_dccp_listen, diff --git a/net/dccp/ipv6.c b/net/dccp/ipv6.c index 17fc4e0166ba..6344f1b18a6a 100644 --- a/net/dccp/ipv6.c +++ b/net/dccp/ipv6.c @@ -1070,7 +1070,7 @@ static const struct proto_ops inet6_dccp_ops = { .socketpair = sock_no_socketpair, .accept = inet_accept, .getname = inet6_getname, - .poll_mask = dccp_poll_mask, + .poll = dccp_poll, .ioctl = inet6_ioctl, .listen = inet_dccp_listen, .shutdown = inet_shutdown, diff --git a/net/dccp/proto.c b/net/dccp/proto.c index ca21c1c76da0..0d56e36a6db7 100644 --- a/net/dccp/proto.c +++ b/net/dccp/proto.c @@ -312,11 +312,20 @@ int dccp_disconnect(struct sock *sk, int flags) EXPORT_SYMBOL_GPL(dccp_disconnect); -__poll_t dccp_poll_mask(struct socket *sock, __poll_t events) +/* + * Wait for a DCCP event. + * + * Note that we don't need to lock the socket, as the upper poll layers + * take care of normal races (between the test and the event) and we don't + * go look at any of the socket buffers directly. + */ +__poll_t dccp_poll(struct file *file, struct socket *sock, + poll_table *wait) { __poll_t mask; struct sock *sk = sock->sk; + sock_poll_wait(file, sk_sleep(sk), wait); if (sk->sk_state == DCCP_LISTEN) return inet_csk_listen_poll(sk); @@ -358,7 +367,7 @@ __poll_t dccp_poll_mask(struct socket *sock, __poll_t events) return mask; } -EXPORT_SYMBOL_GPL(dccp_poll_mask); +EXPORT_SYMBOL_GPL(dccp_poll); int dccp_ioctl(struct sock *sk, int cmd, unsigned long arg) { diff --git a/net/decnet/af_decnet.c b/net/decnet/af_decnet.c index 9a686d890bfa..7d6ff983ba2c 100644 --- a/net/decnet/af_decnet.c +++ b/net/decnet/af_decnet.c @@ -1207,11 +1207,11 @@ static int dn_getname(struct socket *sock, struct sockaddr *uaddr,int peer) } -static __poll_t dn_poll_mask(struct socket *sock, __poll_t events) +static __poll_t dn_poll(struct file *file, struct socket *sock, poll_table *wait) { struct sock *sk = sock->sk; struct dn_scp *scp = DN_SK(sk); - __poll_t mask = datagram_poll_mask(sock, events); + __poll_t mask = datagram_poll(file, sock, wait); if (!skb_queue_empty(&scp->other_receive_queue)) mask |= EPOLLRDBAND; @@ -2331,7 +2331,7 @@ static const struct proto_ops dn_proto_ops = { .socketpair = sock_no_socketpair, .accept = dn_accept, .getname = dn_getname, - .poll_mask = dn_poll_mask, + .poll = dn_poll, .ioctl = dn_ioctl, .listen = dn_listen, .shutdown = dn_shutdown, diff --git a/net/ieee802154/socket.c b/net/ieee802154/socket.c index a0768d2759b8..a60658c85a9a 100644 --- a/net/ieee802154/socket.c +++ b/net/ieee802154/socket.c @@ -423,7 +423,7 @@ static const struct proto_ops ieee802154_raw_ops = { .socketpair = sock_no_socketpair, .accept = sock_no_accept, .getname = sock_no_getname, - .poll_mask = datagram_poll_mask, + .poll = datagram_poll, .ioctl = ieee802154_sock_ioctl, .listen = sock_no_listen, .shutdown = sock_no_shutdown, @@ -969,7 +969,7 @@ static const struct proto_ops ieee802154_dgram_ops = { .socketpair = sock_no_socketpair, .accept = sock_no_accept, .getname = sock_no_getname, - .poll_mask = datagram_poll_mask, + .poll = datagram_poll, .ioctl = ieee802154_sock_ioctl, .listen = sock_no_listen, .shutdown = sock_no_shutdown, diff --git a/net/ipv4/af_inet.c b/net/ipv4/af_inet.c index 15e125558c76..b403499fdabe 100644 --- a/net/ipv4/af_inet.c +++ b/net/ipv4/af_inet.c @@ -986,7 +986,7 @@ const struct proto_ops inet_stream_ops = { .socketpair = sock_no_socketpair, .accept = inet_accept, .getname = inet_getname, - .poll_mask = tcp_poll_mask, + .poll = tcp_poll, .ioctl = inet_ioctl, .listen = inet_listen, .shutdown = inet_shutdown, @@ -1021,7 +1021,7 @@ const struct proto_ops inet_dgram_ops = { .socketpair = sock_no_socketpair, .accept = sock_no_accept, .getname = inet_getname, - .poll_mask = udp_poll_mask, + .poll = udp_poll, .ioctl = inet_ioctl, .listen = sock_no_listen, .shutdown = inet_shutdown, @@ -1042,7 +1042,7 @@ EXPORT_SYMBOL(inet_dgram_ops); /* * For SOCK_RAW sockets; should be the same as inet_dgram_ops but without - * udp_poll_mask + * udp_poll */ static const struct proto_ops inet_sockraw_ops = { .family = PF_INET, @@ -1053,7 +1053,7 @@ static const struct proto_ops inet_sockraw_ops = { .socketpair = sock_no_socketpair, .accept = sock_no_accept, .getname = inet_getname, - .poll_mask = datagram_poll_mask, + .poll = datagram_poll, .ioctl = inet_ioctl, .listen = sock_no_listen, .shutdown = inet_shutdown, diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c index 141acd92e58a..e7b53d2a971f 100644 --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -494,21 +494,32 @@ static inline bool tcp_stream_is_readable(const struct tcp_sock *tp, } /* - * Socket is not locked. We are protected from async events by poll logic and - * correct handling of state changes made by other threads is impossible in - * any case. + * Wait for a TCP event. + * + * Note that we don't need to lock the socket, as the upper poll layers + * take care of normal races (between the test and the event) and we don't + * go look at any of the socket buffers directly. */ -__poll_t tcp_poll_mask(struct socket *sock, __poll_t events) +__poll_t tcp_poll(struct file *file, struct socket *sock, poll_table *wait) { + __poll_t mask; struct sock *sk = sock->sk; const struct tcp_sock *tp = tcp_sk(sk); - __poll_t mask = 0; int state; + sock_poll_wait(file, sk_sleep(sk), wait); + state = inet_sk_state_load(sk); if (state == TCP_LISTEN) return inet_csk_listen_poll(sk); + /* Socket is not locked. We are protected from async events + * by poll logic and correct handling of state changes + * made by other threads is impossible in any case. + */ + + mask = 0; + /* * EPOLLHUP is certainly not done right. But poll() doesn't * have a notion of HUP in just one direction, and for a @@ -589,7 +600,7 @@ __poll_t tcp_poll_mask(struct socket *sock, __poll_t events) return mask; } -EXPORT_SYMBOL(tcp_poll_mask); +EXPORT_SYMBOL(tcp_poll); int tcp_ioctl(struct sock *sk, int cmd, unsigned long arg) { diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c index 9bb27df4dac5..24e116ddae79 100644 --- a/net/ipv4/udp.c +++ b/net/ipv4/udp.c @@ -2591,7 +2591,7 @@ int compat_udp_getsockopt(struct sock *sk, int level, int optname, * udp_poll - wait for a UDP event. * @file - file struct * @sock - socket - * @events - events to wait for + * @wait - poll table * * This is same as datagram poll, except for the special case of * blocking sockets. If application is using a blocking fd @@ -2600,23 +2600,23 @@ int compat_udp_getsockopt(struct sock *sk, int level, int optname, * but then block when reading it. Add special case code * to work around these arguably broken applications. */ -__poll_t udp_poll_mask(struct socket *sock, __poll_t events) +__poll_t udp_poll(struct file *file, struct socket *sock, poll_table *wait) { - __poll_t mask = datagram_poll_mask(sock, events); + __poll_t mask = datagram_poll(file, sock, wait); struct sock *sk = sock->sk; if (!skb_queue_empty(&udp_sk(sk)->reader_queue)) mask |= EPOLLIN | EPOLLRDNORM; /* Check for false positives due to checksum errors */ - if ((mask & EPOLLRDNORM) && !(sock->file->f_flags & O_NONBLOCK) && + if ((mask & EPOLLRDNORM) && !(file->f_flags & O_NONBLOCK) && !(sk->sk_shutdown & RCV_SHUTDOWN) && first_packet_length(sk) == -1) mask &= ~(EPOLLIN | EPOLLRDNORM); return mask; } -EXPORT_SYMBOL(udp_poll_mask); +EXPORT_SYMBOL(udp_poll); int udp_abort(struct sock *sk, int err) { diff --git a/net/ipv6/af_inet6.c b/net/ipv6/af_inet6.c index 74f2a261e8df..9ed0eae91758 100644 --- a/net/ipv6/af_inet6.c +++ b/net/ipv6/af_inet6.c @@ -570,7 +570,7 @@ const struct proto_ops inet6_stream_ops = { .socketpair = sock_no_socketpair, /* a do nothing */ .accept = inet_accept, /* ok */ .getname = inet6_getname, - .poll_mask = tcp_poll_mask, /* ok */ + .poll = tcp_poll, /* ok */ .ioctl = inet6_ioctl, /* must change */ .listen = inet_listen, /* ok */ .shutdown = inet_shutdown, /* ok */ @@ -603,7 +603,7 @@ const struct proto_ops inet6_dgram_ops = { .socketpair = sock_no_socketpair, /* a do nothing */ .accept = sock_no_accept, /* a do nothing */ .getname = inet6_getname, - .poll_mask = udp_poll_mask, /* ok */ + .poll = udp_poll, /* ok */ .ioctl = inet6_ioctl, /* must change */ .listen = sock_no_listen, /* ok */ .shutdown = inet_shutdown, /* ok */ diff --git a/net/ipv6/raw.c b/net/ipv6/raw.c index ce6f0d15b5dd..afc307c89d1a 100644 --- a/net/ipv6/raw.c +++ b/net/ipv6/raw.c @@ -1334,7 +1334,7 @@ void raw6_proc_exit(void) } #endif /* CONFIG_PROC_FS */ -/* Same as inet6_dgram_ops, sans udp_poll_mask. */ +/* Same as inet6_dgram_ops, sans udp_poll. */ const struct proto_ops inet6_sockraw_ops = { .family = PF_INET6, .owner = THIS_MODULE, @@ -1344,7 +1344,7 @@ const struct proto_ops inet6_sockraw_ops = { .socketpair = sock_no_socketpair, /* a do nothing */ .accept = sock_no_accept, /* a do nothing */ .getname = inet6_getname, - .poll_mask = datagram_poll_mask, /* ok */ + .poll = datagram_poll, /* ok */ .ioctl = inet6_ioctl, /* must change */ .listen = sock_no_listen, /* ok */ .shutdown = inet_shutdown, /* ok */ diff --git a/net/iucv/af_iucv.c b/net/iucv/af_iucv.c index 68e86257a549..893a022f9620 100644 --- a/net/iucv/af_iucv.c +++ b/net/iucv/af_iucv.c @@ -1488,11 +1488,14 @@ static inline __poll_t iucv_accept_poll(struct sock *parent) return 0; } -static __poll_t iucv_sock_poll_mask(struct socket *sock, __poll_t events) +__poll_t iucv_sock_poll(struct file *file, struct socket *sock, + poll_table *wait) { struct sock *sk = sock->sk; __poll_t mask = 0; + sock_poll_wait(file, sk_sleep(sk), wait); + if (sk->sk_state == IUCV_LISTEN) return iucv_accept_poll(sk); @@ -2385,7 +2388,7 @@ static const struct proto_ops iucv_sock_ops = { .getname = iucv_sock_getname, .sendmsg = iucv_sock_sendmsg, .recvmsg = iucv_sock_recvmsg, - .poll_mask = iucv_sock_poll_mask, + .poll = iucv_sock_poll, .ioctl = sock_no_ioctl, .mmap = sock_no_mmap, .socketpair = sock_no_socketpair, diff --git a/net/kcm/kcmsock.c b/net/kcm/kcmsock.c index 84b7d5c6fec8..d3601d421571 100644 --- a/net/kcm/kcmsock.c +++ b/net/kcm/kcmsock.c @@ -1336,9 +1336,9 @@ static void init_kcm_sock(struct kcm_sock *kcm, struct kcm_mux *mux) struct list_head *head; int index = 0; - /* For SOCK_SEQPACKET sock type, datagram_poll_mask checks the sk_state, - * so we set sk_state, otherwise epoll_wait always returns right away - * with EPOLLHUP + /* For SOCK_SEQPACKET sock type, datagram_poll checks the sk_state, so + * we set sk_state, otherwise epoll_wait always returns right away with + * EPOLLHUP */ kcm->sk.sk_state = TCP_ESTABLISHED; @@ -1903,7 +1903,7 @@ static const struct proto_ops kcm_dgram_ops = { .socketpair = sock_no_socketpair, .accept = sock_no_accept, .getname = sock_no_getname, - .poll_mask = datagram_poll_mask, + .poll = datagram_poll, .ioctl = kcm_ioctl, .listen = sock_no_listen, .shutdown = sock_no_shutdown, @@ -1924,7 +1924,7 @@ static const struct proto_ops kcm_seqpacket_ops = { .socketpair = sock_no_socketpair, .accept = sock_no_accept, .getname = sock_no_getname, - .poll_mask = datagram_poll_mask, + .poll = datagram_poll, .ioctl = kcm_ioctl, .listen = sock_no_listen, .shutdown = sock_no_shutdown, diff --git a/net/key/af_key.c b/net/key/af_key.c index 8bdc1cbe490a..5e1d2946ffbf 100644 --- a/net/key/af_key.c +++ b/net/key/af_key.c @@ -3751,7 +3751,7 @@ static const struct proto_ops pfkey_ops = { /* Now the operations that really occur. */ .release = pfkey_release, - .poll_mask = datagram_poll_mask, + .poll = datagram_poll, .sendmsg = pfkey_sendmsg, .recvmsg = pfkey_recvmsg, }; diff --git a/net/l2tp/l2tp_ip.c b/net/l2tp/l2tp_ip.c index 181073bf6925..a9c05b2bc1b0 100644 --- a/net/l2tp/l2tp_ip.c +++ b/net/l2tp/l2tp_ip.c @@ -613,7 +613,7 @@ static const struct proto_ops l2tp_ip_ops = { .socketpair = sock_no_socketpair, .accept = sock_no_accept, .getname = l2tp_ip_getname, - .poll_mask = datagram_poll_mask, + .poll = datagram_poll, .ioctl = inet_ioctl, .listen = sock_no_listen, .shutdown = inet_shutdown, diff --git a/net/l2tp/l2tp_ip6.c b/net/l2tp/l2tp_ip6.c index 336e4c00abbc..957369192ca1 100644 --- a/net/l2tp/l2tp_ip6.c +++ b/net/l2tp/l2tp_ip6.c @@ -754,7 +754,7 @@ static const struct proto_ops l2tp_ip6_ops = { .socketpair = sock_no_socketpair, .accept = sock_no_accept, .getname = l2tp_ip6_getname, - .poll_mask = datagram_poll_mask, + .poll = datagram_poll, .ioctl = inet6_ioctl, .listen = sock_no_listen, .shutdown = inet_shutdown, diff --git a/net/l2tp/l2tp_ppp.c b/net/l2tp/l2tp_ppp.c index 55188382845c..e398797878a9 100644 --- a/net/l2tp/l2tp_ppp.c +++ b/net/l2tp/l2tp_ppp.c @@ -1818,7 +1818,7 @@ static const struct proto_ops pppol2tp_ops = { .socketpair = sock_no_socketpair, .accept = sock_no_accept, .getname = pppol2tp_getname, - .poll_mask = datagram_poll_mask, + .poll = datagram_poll, .listen = sock_no_listen, .shutdown = sock_no_shutdown, .setsockopt = pppol2tp_setsockopt, diff --git a/net/llc/af_llc.c b/net/llc/af_llc.c index 804de8490186..1beeea9549fa 100644 --- a/net/llc/af_llc.c +++ b/net/llc/af_llc.c @@ -1192,7 +1192,7 @@ static const struct proto_ops llc_ui_ops = { .socketpair = sock_no_socketpair, .accept = llc_ui_accept, .getname = llc_ui_getname, - .poll_mask = datagram_poll_mask, + .poll = datagram_poll, .ioctl = llc_ui_ioctl, .listen = llc_ui_listen, .shutdown = llc_ui_shutdown, diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c index 1189b84413d5..393573a99a5a 100644 --- a/net/netlink/af_netlink.c +++ b/net/netlink/af_netlink.c @@ -2658,7 +2658,7 @@ static const struct proto_ops netlink_ops = { .socketpair = sock_no_socketpair, .accept = sock_no_accept, .getname = netlink_getname, - .poll_mask = datagram_poll_mask, + .poll = datagram_poll, .ioctl = netlink_ioctl, .listen = sock_no_listen, .shutdown = sock_no_shutdown, diff --git a/net/netrom/af_netrom.c b/net/netrom/af_netrom.c index 93fbcafbf388..03f37c4e64fe 100644 --- a/net/netrom/af_netrom.c +++ b/net/netrom/af_netrom.c @@ -1355,7 +1355,7 @@ static const struct proto_ops nr_proto_ops = { .socketpair = sock_no_socketpair, .accept = nr_accept, .getname = nr_getname, - .poll_mask = datagram_poll_mask, + .poll = datagram_poll, .ioctl = nr_ioctl, .listen = nr_listen, .shutdown = sock_no_shutdown, diff --git a/net/nfc/llcp_sock.c b/net/nfc/llcp_sock.c index ab5bb14b49af..ea0c0c6f1874 100644 --- a/net/nfc/llcp_sock.c +++ b/net/nfc/llcp_sock.c @@ -548,13 +548,16 @@ static inline __poll_t llcp_accept_poll(struct sock *parent) return 0; } -static __poll_t llcp_sock_poll_mask(struct socket *sock, __poll_t events) +static __poll_t llcp_sock_poll(struct file *file, struct socket *sock, + poll_table *wait) { struct sock *sk = sock->sk; __poll_t mask = 0; pr_debug("%p\n", sk); + sock_poll_wait(file, sk_sleep(sk), wait); + if (sk->sk_state == LLCP_LISTEN) return llcp_accept_poll(sk); @@ -896,7 +899,7 @@ static const struct proto_ops llcp_sock_ops = { .socketpair = sock_no_socketpair, .accept = llcp_sock_accept, .getname = llcp_sock_getname, - .poll_mask = llcp_sock_poll_mask, + .poll = llcp_sock_poll, .ioctl = sock_no_ioctl, .listen = llcp_sock_listen, .shutdown = sock_no_shutdown, @@ -916,7 +919,7 @@ static const struct proto_ops llcp_rawsock_ops = { .socketpair = sock_no_socketpair, .accept = sock_no_accept, .getname = llcp_sock_getname, - .poll_mask = llcp_sock_poll_mask, + .poll = llcp_sock_poll, .ioctl = sock_no_ioctl, .listen = sock_no_listen, .shutdown = sock_no_shutdown, diff --git a/net/nfc/rawsock.c b/net/nfc/rawsock.c index 60c322531c49..e2188deb08dc 100644 --- a/net/nfc/rawsock.c +++ b/net/nfc/rawsock.c @@ -284,7 +284,7 @@ static const struct proto_ops rawsock_ops = { .socketpair = sock_no_socketpair, .accept = sock_no_accept, .getname = sock_no_getname, - .poll_mask = datagram_poll_mask, + .poll = datagram_poll, .ioctl = sock_no_ioctl, .listen = sock_no_listen, .shutdown = sock_no_shutdown, @@ -304,7 +304,7 @@ static const struct proto_ops rawsock_raw_ops = { .socketpair = sock_no_socketpair, .accept = sock_no_accept, .getname = sock_no_getname, - .poll_mask = datagram_poll_mask, + .poll = datagram_poll, .ioctl = sock_no_ioctl, .listen = sock_no_listen, .shutdown = sock_no_shutdown, diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c index ff8e7e245c37..57634bc3da74 100644 --- a/net/packet/af_packet.c +++ b/net/packet/af_packet.c @@ -4076,11 +4076,12 @@ static int packet_ioctl(struct socket *sock, unsigned int cmd, return 0; } -static __poll_t packet_poll_mask(struct socket *sock, __poll_t events) +static __poll_t packet_poll(struct file *file, struct socket *sock, + poll_table *wait) { struct sock *sk = sock->sk; struct packet_sock *po = pkt_sk(sk); - __poll_t mask = datagram_poll_mask(sock, events); + __poll_t mask = datagram_poll(file, sock, wait); spin_lock_bh(&sk->sk_receive_queue.lock); if (po->rx_ring.pg_vec) { @@ -4422,7 +4423,7 @@ static const struct proto_ops packet_ops_spkt = { .socketpair = sock_no_socketpair, .accept = sock_no_accept, .getname = packet_getname_spkt, - .poll_mask = datagram_poll_mask, + .poll = datagram_poll, .ioctl = packet_ioctl, .listen = sock_no_listen, .shutdown = sock_no_shutdown, @@ -4443,7 +4444,7 @@ static const struct proto_ops packet_ops = { .socketpair = sock_no_socketpair, .accept = sock_no_accept, .getname = packet_getname, - .poll_mask = packet_poll_mask, + .poll = packet_poll, .ioctl = packet_ioctl, .listen = sock_no_listen, .shutdown = sock_no_shutdown, diff --git a/net/phonet/socket.c b/net/phonet/socket.c index c295c4e20f01..30187990257f 100644 --- a/net/phonet/socket.c +++ b/net/phonet/socket.c @@ -340,12 +340,15 @@ static int pn_socket_getname(struct socket *sock, struct sockaddr *addr, return sizeof(struct sockaddr_pn); } -static __poll_t pn_socket_poll_mask(struct socket *sock, __poll_t events) +static __poll_t pn_socket_poll(struct file *file, struct socket *sock, + poll_table *wait) { struct sock *sk = sock->sk; struct pep_sock *pn = pep_sk(sk); __poll_t mask = 0; + poll_wait(file, sk_sleep(sk), wait); + if (sk->sk_state == TCP_CLOSE) return EPOLLERR; if (!skb_queue_empty(&sk->sk_receive_queue)) @@ -445,7 +448,7 @@ const struct proto_ops phonet_dgram_ops = { .socketpair = sock_no_socketpair, .accept = sock_no_accept, .getname = pn_socket_getname, - .poll_mask = datagram_poll_mask, + .poll = datagram_poll, .ioctl = pn_socket_ioctl, .listen = sock_no_listen, .shutdown = sock_no_shutdown, @@ -470,7 +473,7 @@ const struct proto_ops phonet_stream_ops = { .socketpair = sock_no_socketpair, .accept = pn_socket_accept, .getname = pn_socket_getname, - .poll_mask = pn_socket_poll_mask, + .poll = pn_socket_poll, .ioctl = pn_socket_ioctl, .listen = pn_socket_listen, .shutdown = sock_no_shutdown, diff --git a/net/qrtr/qrtr.c b/net/qrtr/qrtr.c index 1b5025ea5b04..2aa07b547b16 100644 --- a/net/qrtr/qrtr.c +++ b/net/qrtr/qrtr.c @@ -1023,7 +1023,7 @@ static const struct proto_ops qrtr_proto_ops = { .recvmsg = qrtr_recvmsg, .getname = qrtr_getname, .ioctl = qrtr_ioctl, - .poll_mask = datagram_poll_mask, + .poll = datagram_poll, .shutdown = sock_no_shutdown, .setsockopt = sock_no_setsockopt, .getsockopt = sock_no_getsockopt, diff --git a/net/rose/af_rose.c b/net/rose/af_rose.c index ebe42e7eb456..d00a0ef39a56 100644 --- a/net/rose/af_rose.c +++ b/net/rose/af_rose.c @@ -1470,7 +1470,7 @@ static const struct proto_ops rose_proto_ops = { .socketpair = sock_no_socketpair, .accept = rose_accept, .getname = rose_getname, - .poll_mask = datagram_poll_mask, + .poll = datagram_poll, .ioctl = rose_ioctl, .listen = rose_listen, .shutdown = sock_no_shutdown, diff --git a/net/rxrpc/af_rxrpc.c b/net/rxrpc/af_rxrpc.c index 3b1ac93efee2..2b463047dd7b 100644 --- a/net/rxrpc/af_rxrpc.c +++ b/net/rxrpc/af_rxrpc.c @@ -734,11 +734,15 @@ static int rxrpc_getsockopt(struct socket *sock, int level, int optname, /* * permit an RxRPC socket to be polled */ -static __poll_t rxrpc_poll_mask(struct socket *sock, __poll_t events) +static __poll_t rxrpc_poll(struct file *file, struct socket *sock, + poll_table *wait) { struct sock *sk = sock->sk; struct rxrpc_sock *rx = rxrpc_sk(sk); - __poll_t mask = 0; + __poll_t mask; + + sock_poll_wait(file, sk_sleep(sk), wait); + mask = 0; /* the socket is readable if there are any messages waiting on the Rx * queue */ @@ -945,7 +949,7 @@ static const struct proto_ops rxrpc_rpc_ops = { .socketpair = sock_no_socketpair, .accept = sock_no_accept, .getname = sock_no_getname, - .poll_mask = rxrpc_poll_mask, + .poll = rxrpc_poll, .ioctl = sock_no_ioctl, .listen = rxrpc_listen, .shutdown = rxrpc_shutdown, diff --git a/net/sctp/ipv6.c b/net/sctp/ipv6.c index 7339918a805d..0cd2e764f47f 100644 --- a/net/sctp/ipv6.c +++ b/net/sctp/ipv6.c @@ -1010,7 +1010,7 @@ static const struct proto_ops inet6_seqpacket_ops = { .socketpair = sock_no_socketpair, .accept = inet_accept, .getname = sctp_getname, - .poll_mask = sctp_poll_mask, + .poll = sctp_poll, .ioctl = inet6_ioctl, .listen = sctp_inet_listen, .shutdown = inet_shutdown, diff --git a/net/sctp/protocol.c b/net/sctp/protocol.c index 5dffbc493008..67f73d3a1356 100644 --- a/net/sctp/protocol.c +++ b/net/sctp/protocol.c @@ -1016,7 +1016,7 @@ static const struct proto_ops inet_seqpacket_ops = { .socketpair = sock_no_socketpair, .accept = inet_accept, .getname = inet_getname, /* Semantics are different. */ - .poll_mask = sctp_poll_mask, + .poll = sctp_poll, .ioctl = inet_ioctl, .listen = sctp_inet_listen, .shutdown = inet_shutdown, /* Looks harmless. */ diff --git a/net/sctp/socket.c b/net/sctp/socket.c index d20f7addee19..ce620e878538 100644 --- a/net/sctp/socket.c +++ b/net/sctp/socket.c @@ -7717,12 +7717,14 @@ out: * here, again, by modeling the current TCP/UDP code. We don't have * a good way to test with it yet. */ -__poll_t sctp_poll_mask(struct socket *sock, __poll_t events) +__poll_t sctp_poll(struct file *file, struct socket *sock, poll_table *wait) { struct sock *sk = sock->sk; struct sctp_sock *sp = sctp_sk(sk); __poll_t mask; + poll_wait(file, sk_sleep(sk), wait); + sock_rps_record_flow(sk); /* A TCP-style listening socket becomes readable when the accept queue diff --git a/net/smc/af_smc.c b/net/smc/af_smc.c index da7f02edcd37..973b4471b532 100644 --- a/net/smc/af_smc.c +++ b/net/smc/af_smc.c @@ -1273,7 +1273,8 @@ static __poll_t smc_accept_poll(struct sock *parent) return mask; } -static __poll_t smc_poll_mask(struct socket *sock, __poll_t events) +static __poll_t smc_poll(struct file *file, struct socket *sock, + poll_table *wait) { struct sock *sk = sock->sk; __poll_t mask = 0; @@ -1289,7 +1290,7 @@ static __poll_t smc_poll_mask(struct socket *sock, __poll_t events) if ((sk->sk_state == SMC_INIT) || smc->use_fallback) { /* delegate to CLC child sock */ release_sock(sk); - mask = smc->clcsock->ops->poll_mask(smc->clcsock, events); + mask = smc->clcsock->ops->poll(file, smc->clcsock, wait); lock_sock(sk); sk->sk_err = smc->clcsock->sk->sk_err; if (sk->sk_err) { @@ -1307,6 +1308,11 @@ static __poll_t smc_poll_mask(struct socket *sock, __poll_t events) } } } else { + if (sk->sk_state != SMC_CLOSED) { + release_sock(sk); + sock_poll_wait(file, sk_sleep(sk), wait); + lock_sock(sk); + } if (sk->sk_err) mask |= EPOLLERR; if ((sk->sk_shutdown == SHUTDOWN_MASK) || @@ -1619,7 +1625,7 @@ static const struct proto_ops smc_sock_ops = { .socketpair = sock_no_socketpair, .accept = smc_accept, .getname = smc_getname, - .poll_mask = smc_poll_mask, + .poll = smc_poll, .ioctl = smc_ioctl, .listen = smc_listen, .shutdown = smc_shutdown, diff --git a/net/socket.c b/net/socket.c index 8a109012608a..a564c6ed19d5 100644 --- a/net/socket.c +++ b/net/socket.c @@ -117,10 +117,8 @@ static ssize_t sock_write_iter(struct kiocb *iocb, struct iov_iter *from); static int sock_mmap(struct file *file, struct vm_area_struct *vma); static int sock_close(struct inode *inode, struct file *file); -static struct wait_queue_head *sock_get_poll_head(struct file *file, - __poll_t events); -static __poll_t sock_poll_mask(struct file *file, __poll_t); -static __poll_t sock_poll(struct file *file, struct poll_table_struct *wait); +static __poll_t sock_poll(struct file *file, + struct poll_table_struct *wait); static long sock_ioctl(struct file *file, unsigned int cmd, unsigned long arg); #ifdef CONFIG_COMPAT static long compat_sock_ioctl(struct file *file, @@ -143,8 +141,6 @@ static const struct file_operations socket_file_ops = { .llseek = no_llseek, .read_iter = sock_read_iter, .write_iter = sock_write_iter, - .get_poll_head = sock_get_poll_head, - .poll_mask = sock_poll_mask, .poll = sock_poll, .unlocked_ioctl = sock_ioctl, #ifdef CONFIG_COMPAT @@ -1130,48 +1126,14 @@ out_release: } EXPORT_SYMBOL(sock_create_lite); -static struct wait_queue_head *sock_get_poll_head(struct file *file, - __poll_t events) -{ - struct socket *sock = file->private_data; - - if (!sock->ops->poll_mask) - return NULL; - sock_poll_busy_loop(sock, events); - return sk_sleep(sock->sk); -} - -static __poll_t sock_poll_mask(struct file *file, __poll_t events) -{ - struct socket *sock = file->private_data; - - /* - * We need to be sure we are in sync with the socket flags modification. - * - * This memory barrier is paired in the wq_has_sleeper. - */ - smp_mb(); - - /* this socket can poll_ll so tell the system call */ - return sock->ops->poll_mask(sock, events) | - (sk_can_busy_loop(sock->sk) ? POLL_BUSY_LOOP : 0); -} - /* No kernel lock held - perfect */ static __poll_t sock_poll(struct file *file, poll_table *wait) { struct socket *sock = file->private_data; - __poll_t events = poll_requested_events(wait), mask = 0; - - if (sock->ops->poll) { - sock_poll_busy_loop(sock, events); - mask = sock->ops->poll(file, sock, wait); - } else if (sock->ops->poll_mask) { - sock_poll_wait(file, sock_get_poll_head(file, events), wait); - mask = sock->ops->poll_mask(sock, events); - } + __poll_t events = poll_requested_events(wait); - return mask | sock_poll_busy_flag(sock); + sock_poll_busy_loop(sock, events); + return sock->ops->poll(file, sock, wait) | sock_poll_busy_flag(sock); } static int sock_mmap(struct file *file, struct vm_area_struct *vma) diff --git a/net/tipc/socket.c b/net/tipc/socket.c index 14a5d055717d..930852c54d7a 100644 --- a/net/tipc/socket.c +++ b/net/tipc/socket.c @@ -692,9 +692,10 @@ static int tipc_getname(struct socket *sock, struct sockaddr *uaddr, } /** - * tipc_poll - read pollmask + * tipc_poll - read and possibly block on pollmask * @file: file structure associated with the socket * @sock: socket for which to calculate the poll bits + * @wait: ??? * * Returns pollmask value * @@ -708,12 +709,15 @@ static int tipc_getname(struct socket *sock, struct sockaddr *uaddr, * imply that the operation will succeed, merely that it should be performed * and will not block. */ -static __poll_t tipc_poll_mask(struct socket *sock, __poll_t events) +static __poll_t tipc_poll(struct file *file, struct socket *sock, + poll_table *wait) { struct sock *sk = sock->sk; struct tipc_sock *tsk = tipc_sk(sk); __poll_t revents = 0; + sock_poll_wait(file, sk_sleep(sk), wait); + if (sk->sk_shutdown & RCV_SHUTDOWN) revents |= EPOLLRDHUP | EPOLLIN | EPOLLRDNORM; if (sk->sk_shutdown == SHUTDOWN_MASK) @@ -3033,7 +3037,7 @@ static const struct proto_ops msg_ops = { .socketpair = tipc_socketpair, .accept = sock_no_accept, .getname = tipc_getname, - .poll_mask = tipc_poll_mask, + .poll = tipc_poll, .ioctl = tipc_ioctl, .listen = sock_no_listen, .shutdown = tipc_shutdown, @@ -3054,7 +3058,7 @@ static const struct proto_ops packet_ops = { .socketpair = tipc_socketpair, .accept = tipc_accept, .getname = tipc_getname, - .poll_mask = tipc_poll_mask, + .poll = tipc_poll, .ioctl = tipc_ioctl, .listen = tipc_listen, .shutdown = tipc_shutdown, @@ -3075,7 +3079,7 @@ static const struct proto_ops stream_ops = { .socketpair = tipc_socketpair, .accept = tipc_accept, .getname = tipc_getname, - .poll_mask = tipc_poll_mask, + .poll = tipc_poll, .ioctl = tipc_ioctl, .listen = tipc_listen, .shutdown = tipc_shutdown, diff --git a/net/tls/tls_main.c b/net/tls/tls_main.c index a127d61e8af9..301f22430469 100644 --- a/net/tls/tls_main.c +++ b/net/tls/tls_main.c @@ -712,7 +712,7 @@ static int __init tls_register(void) build_protos(tls_prots[TLSV4], &tcp_prot); tls_sw_proto_ops = inet_stream_ops; - tls_sw_proto_ops.poll_mask = tls_sw_poll_mask; + tls_sw_proto_ops.poll = tls_sw_poll; tls_sw_proto_ops.splice_read = tls_sw_splice_read; #ifdef CONFIG_TLS_DEVICE diff --git a/net/tls/tls_sw.c b/net/tls/tls_sw.c index f127fac88acf..d2380548f8f6 100644 --- a/net/tls/tls_sw.c +++ b/net/tls/tls_sw.c @@ -919,22 +919,23 @@ splice_read_end: return copied ? : err; } -__poll_t tls_sw_poll_mask(struct socket *sock, __poll_t events) +unsigned int tls_sw_poll(struct file *file, struct socket *sock, + struct poll_table_struct *wait) { + unsigned int ret; struct sock *sk = sock->sk; struct tls_context *tls_ctx = tls_get_ctx(sk); struct tls_sw_context_rx *ctx = tls_sw_ctx_rx(tls_ctx); - __poll_t mask; - /* Grab EPOLLOUT and EPOLLHUP from the underlying socket */ - mask = ctx->sk_poll_mask(sock, events); + /* Grab POLLOUT and POLLHUP from the underlying socket */ + ret = ctx->sk_poll(file, sock, wait); - /* Clear EPOLLIN bits, and set based on recv_pkt */ - mask &= ~(EPOLLIN | EPOLLRDNORM); + /* Clear POLLIN bits, and set based on recv_pkt */ + ret &= ~(POLLIN | POLLRDNORM); if (ctx->recv_pkt) - mask |= EPOLLIN | EPOLLRDNORM; + ret |= POLLIN | POLLRDNORM; - return mask; + return ret; } static int tls_read_size(struct strparser *strp, struct sk_buff *skb) @@ -1191,7 +1192,7 @@ int tls_set_sw_offload(struct sock *sk, struct tls_context *ctx, int tx) sk->sk_data_ready = tls_data_ready; write_unlock_bh(&sk->sk_callback_lock); - sw_ctx_rx->sk_poll_mask = sk->sk_socket->ops->poll_mask; + sw_ctx_rx->sk_poll = sk->sk_socket->ops->poll; strp_check_rcv(&sw_ctx_rx->strp); } diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c index 95b02a71fd47..e5473c03d667 100644 --- a/net/unix/af_unix.c +++ b/net/unix/af_unix.c @@ -638,8 +638,9 @@ static int unix_stream_connect(struct socket *, struct sockaddr *, static int unix_socketpair(struct socket *, struct socket *); static int unix_accept(struct socket *, struct socket *, int, bool); static int unix_getname(struct socket *, struct sockaddr *, int); -static __poll_t unix_poll_mask(struct socket *, __poll_t); -static __poll_t unix_dgram_poll_mask(struct socket *, __poll_t); +static __poll_t unix_poll(struct file *, struct socket *, poll_table *); +static __poll_t unix_dgram_poll(struct file *, struct socket *, + poll_table *); static int unix_ioctl(struct socket *, unsigned int, unsigned long); static int unix_shutdown(struct socket *, int); static int unix_stream_sendmsg(struct socket *, struct msghdr *, size_t); @@ -680,7 +681,7 @@ static const struct proto_ops unix_stream_ops = { .socketpair = unix_socketpair, .accept = unix_accept, .getname = unix_getname, - .poll_mask = unix_poll_mask, + .poll = unix_poll, .ioctl = unix_ioctl, .listen = unix_listen, .shutdown = unix_shutdown, @@ -703,7 +704,7 @@ static const struct proto_ops unix_dgram_ops = { .socketpair = unix_socketpair, .accept = sock_no_accept, .getname = unix_getname, - .poll_mask = unix_dgram_poll_mask, + .poll = unix_dgram_poll, .ioctl = unix_ioctl, .listen = sock_no_listen, .shutdown = unix_shutdown, @@ -725,7 +726,7 @@ static const struct proto_ops unix_seqpacket_ops = { .socketpair = unix_socketpair, .accept = unix_accept, .getname = unix_getname, - .poll_mask = unix_dgram_poll_mask, + .poll = unix_dgram_poll, .ioctl = unix_ioctl, .listen = unix_listen, .shutdown = unix_shutdown, @@ -2629,10 +2630,13 @@ static int unix_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg) return err; } -static __poll_t unix_poll_mask(struct socket *sock, __poll_t events) +static __poll_t unix_poll(struct file *file, struct socket *sock, poll_table *wait) { struct sock *sk = sock->sk; - __poll_t mask = 0; + __poll_t mask; + + sock_poll_wait(file, sk_sleep(sk), wait); + mask = 0; /* exceptional events? */ if (sk->sk_err) @@ -2661,11 +2665,15 @@ static __poll_t unix_poll_mask(struct socket *sock, __poll_t events) return mask; } -static __poll_t unix_dgram_poll_mask(struct socket *sock, __poll_t events) +static __poll_t unix_dgram_poll(struct file *file, struct socket *sock, + poll_table *wait) { struct sock *sk = sock->sk, *other; - int writable; - __poll_t mask = 0; + unsigned int writable; + __poll_t mask; + + sock_poll_wait(file, sk_sleep(sk), wait); + mask = 0; /* exceptional events? */ if (sk->sk_err || !skb_queue_empty(&sk->sk_error_queue)) @@ -2691,7 +2699,7 @@ static __poll_t unix_dgram_poll_mask(struct socket *sock, __poll_t events) } /* No write status requested, avoid expensive OUT tests. */ - if (!(events & (EPOLLWRBAND|EPOLLWRNORM|EPOLLOUT))) + if (!(poll_requested_events(wait) & (EPOLLWRBAND|EPOLLWRNORM|EPOLLOUT))) return mask; writable = unix_writable(sk); diff --git a/net/vmw_vsock/af_vsock.c b/net/vmw_vsock/af_vsock.c index bb5d5fa68c35..c1076c19b858 100644 --- a/net/vmw_vsock/af_vsock.c +++ b/net/vmw_vsock/af_vsock.c @@ -850,11 +850,18 @@ static int vsock_shutdown(struct socket *sock, int mode) return err; } -static __poll_t vsock_poll_mask(struct socket *sock, __poll_t events) +static __poll_t vsock_poll(struct file *file, struct socket *sock, + poll_table *wait) { - struct sock *sk = sock->sk; - struct vsock_sock *vsk = vsock_sk(sk); - __poll_t mask = 0; + struct sock *sk; + __poll_t mask; + struct vsock_sock *vsk; + + sk = sock->sk; + vsk = vsock_sk(sk); + + poll_wait(file, sk_sleep(sk), wait); + mask = 0; if (sk->sk_err) /* Signify that there has been an error on this socket. */ @@ -1084,7 +1091,7 @@ static const struct proto_ops vsock_dgram_ops = { .socketpair = sock_no_socketpair, .accept = sock_no_accept, .getname = vsock_getname, - .poll_mask = vsock_poll_mask, + .poll = vsock_poll, .ioctl = sock_no_ioctl, .listen = sock_no_listen, .shutdown = vsock_shutdown, @@ -1842,7 +1849,7 @@ static const struct proto_ops vsock_stream_ops = { .socketpair = sock_no_socketpair, .accept = vsock_accept, .getname = vsock_getname, - .poll_mask = vsock_poll_mask, + .poll = vsock_poll, .ioctl = sock_no_ioctl, .listen = vsock_listen, .shutdown = vsock_shutdown, diff --git a/net/x25/af_x25.c b/net/x25/af_x25.c index f93365ae0fdd..d49aa79b7997 100644 --- a/net/x25/af_x25.c +++ b/net/x25/af_x25.c @@ -1750,7 +1750,7 @@ static const struct proto_ops x25_proto_ops = { .socketpair = sock_no_socketpair, .accept = x25_accept, .getname = x25_getname, - .poll_mask = datagram_poll_mask, + .poll = datagram_poll, .ioctl = x25_ioctl, #ifdef CONFIG_COMPAT .compat_ioctl = compat_x25_ioctl, diff --git a/net/xdp/xsk.c b/net/xdp/xsk.c index 3b3410ada097..59fb7d3c36a3 100644 --- a/net/xdp/xsk.c +++ b/net/xdp/xsk.c @@ -303,9 +303,10 @@ static int xsk_sendmsg(struct socket *sock, struct msghdr *m, size_t total_len) return (xs->zc) ? xsk_zc_xmit(sk) : xsk_generic_xmit(sk, m, total_len); } -static __poll_t xsk_poll_mask(struct socket *sock, __poll_t events) +static unsigned int xsk_poll(struct file *file, struct socket *sock, + struct poll_table_struct *wait) { - __poll_t mask = datagram_poll_mask(sock, events); + unsigned int mask = datagram_poll(file, sock, wait); struct sock *sk = sock->sk; struct xdp_sock *xs = xdp_sk(sk); @@ -696,7 +697,7 @@ static const struct proto_ops xsk_proto_ops = { .socketpair = sock_no_socketpair, .accept = sock_no_accept, .getname = sock_no_getname, - .poll_mask = xsk_poll_mask, + .poll = xsk_poll, .ioctl = sock_no_ioctl, .listen = sock_no_listen, .shutdown = sock_no_shutdown, -- cgit v1.2.3 From 4bb6e96ab808f88d746343637f0cc2243b527da5 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Wed, 27 Jun 2018 23:26:01 -0700 Subject: lib/percpu_ida.c: don't do alloc from per-CPU list if there is none In commit 804209d8a009 ("lib/percpu_ida.c: use _irqsave() instead of local_irq_save() + spin_lock") I inlined alloc_local_tag() and mixed up the >= check from percpu_ida_alloc() with the one in alloc_local_tag(). Don't alloc from per-CPU freelist if ->nr_free is zero. Link: http://lkml.kernel.org/r/20180613075830.c3zeva52fuj6fxxv@linutronix.de Fixes: 804209d8a009 ("lib/percpu_ida.c: use _irqsave() instead of local_irq_save() + spin_lock") Signed-off-by: Sebastian Andrzej Siewior Reported-by: David Disseldorp Tested-by: David Disseldorp Cc: Thomas Gleixner Cc: Nicholas Bellinger Cc: Shaohua Li Cc: Kent Overstreet Cc: Matthew Wilcox Cc: Jens Axboe Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- lib/percpu_ida.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/lib/percpu_ida.c b/lib/percpu_ida.c index 9bbd9c5d375a..beb14839b41a 100644 --- a/lib/percpu_ida.c +++ b/lib/percpu_ida.c @@ -141,7 +141,7 @@ int percpu_ida_alloc(struct percpu_ida *pool, int state) spin_lock_irqsave(&tags->lock, flags); /* Fastpath */ - if (likely(tags->nr_free >= 0)) { + if (likely(tags->nr_free)) { tag = tags->freelist[--tags->nr_free]; spin_unlock_irqrestore(&tags->lock, flags); return tag; -- cgit v1.2.3 From 28557cc106e6d2aa8b8c5c7687ea9f8055ff3911 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Wed, 27 Jun 2018 23:26:05 -0700 Subject: Revert mm/vmstat.c: fix vmstat_update() preemption BUG Revert commit c7f26ccfb2c3 ("mm/vmstat.c: fix vmstat_update() preemption BUG"). Steven saw a "using smp_processor_id() in preemptible" message and added a preempt_disable() section around it to keep it quiet. This is not the right thing to do it does not fix the real problem. vmstat_update() is invoked by a kworker on a specific CPU. This worker it bound to this CPU. The name of the worker was "kworker/1:1" so it should have been a worker which was bound to CPU1. A worker which can run on any CPU would have a `u' before the first digit. smp_processor_id() can be used in a preempt-enabled region as long as the task is bound to a single CPU which is the case here. If it could run on an arbitrary CPU then this is the problem we have an should seek to resolve. Not only this smp_processor_id() must not be migrated to another CPU but also refresh_cpu_vm_stats() which might access wrong per-CPU variables. Not to mention that other code relies on the fact that such a worker runs on one specific CPU only. Therefore revert that commit and we should look instead what broke the affinity mask of the kworker. Link: http://lkml.kernel.org/r/20180504104451.20278-1-bigeasy@linutronix.de Signed-off-by: Sebastian Andrzej Siewior Cc: Steven J. Hill Cc: Tejun Heo Cc: Vlastimil Babka Cc: Thomas Gleixner Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/vmstat.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/mm/vmstat.c b/mm/vmstat.c index 75eda9c2b260..8ba0870ecddd 100644 --- a/mm/vmstat.c +++ b/mm/vmstat.c @@ -1796,11 +1796,9 @@ static void vmstat_update(struct work_struct *w) * to occur in the future. Keep on running the * update worker thread. */ - preempt_disable(); queue_delayed_work_on(smp_processor_id(), mm_percpu_wq, this_cpu_ptr(&vmstat_work), round_jiffies_relative(sysctl_stat_interval)); - preempt_enable(); } } -- cgit v1.2.3 From d50d82faa0c964e31f7a946ba8aba7c715ca7ab0 Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Wed, 27 Jun 2018 23:26:09 -0700 Subject: slub: fix failure when we delete and create a slab cache In kernel 4.17 I removed some code from dm-bufio that did slab cache merging (commit 21bb13276768: "dm bufio: remove code that merges slab caches") - both slab and slub support merging caches with identical attributes, so dm-bufio now just calls kmem_cache_create and relies on implicit merging. This uncovered a bug in the slub subsystem - if we delete a cache and immediatelly create another cache with the same attributes, it fails because of duplicate filename in /sys/kernel/slab/. The slub subsystem offloads freeing the cache to a workqueue - and if we create the new cache before the workqueue runs, it complains because of duplicate filename in sysfs. This patch fixes the bug by moving the call of kobject_del from sysfs_slab_remove_workfn to shutdown_cache. kobject_del must be called while we hold slab_mutex - so that the sysfs entry is deleted before a cache with the same attributes could be created. Running device-mapper-test-suite with: dmtest run --suite thin-provisioning -n /commit_failure_causes_fallback/ triggered: Buffer I/O error on dev dm-0, logical block 1572848, async page read device-mapper: thin: 253:1: metadata operation 'dm_pool_alloc_data_block' failed: error = -5 device-mapper: thin: 253:1: aborting current metadata transaction sysfs: cannot create duplicate filename '/kernel/slab/:a-0000144' CPU: 2 PID: 1037 Comm: kworker/u48:1 Not tainted 4.17.0.snitm+ #25 Hardware name: Supermicro SYS-1029P-WTR/X11DDW-L, BIOS 2.0a 12/06/2017 Workqueue: dm-thin do_worker [dm_thin_pool] Call Trace: dump_stack+0x5a/0x73 sysfs_warn_dup+0x58/0x70 sysfs_create_dir_ns+0x77/0x80 kobject_add_internal+0xba/0x2e0 kobject_init_and_add+0x70/0xb0 sysfs_slab_add+0xb1/0x250 __kmem_cache_create+0x116/0x150 create_cache+0xd9/0x1f0 kmem_cache_create_usercopy+0x1c1/0x250 kmem_cache_create+0x18/0x20 dm_bufio_client_create+0x1ae/0x410 [dm_bufio] dm_block_manager_create+0x5e/0x90 [dm_persistent_data] __create_persistent_data_objects+0x38/0x940 [dm_thin_pool] dm_pool_abort_metadata+0x64/0x90 [dm_thin_pool] metadata_operation_failed+0x59/0x100 [dm_thin_pool] alloc_data_block.isra.53+0x86/0x180 [dm_thin_pool] process_cell+0x2a3/0x550 [dm_thin_pool] do_worker+0x28d/0x8f0 [dm_thin_pool] process_one_work+0x171/0x370 worker_thread+0x49/0x3f0 kthread+0xf8/0x130 ret_from_fork+0x35/0x40 kobject_add_internal failed for :a-0000144 with -EEXIST, don't try to register things with the same name in the same directory. kmem_cache_create(dm_bufio_buffer-16) failed with error -17 Link: http://lkml.kernel.org/r/alpine.LRH.2.02.1806151817130.6333@file01.intranet.prod.int.rdu2.redhat.com Signed-off-by: Mikulas Patocka Reported-by: Mike Snitzer Tested-by: Mike Snitzer Cc: Christoph Lameter Cc: Pekka Enberg Cc: David Rientjes Cc: Joonsoo Kim Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/slub_def.h | 4 ++++ mm/slab_common.c | 4 ++++ mm/slub.c | 7 ++++++- 3 files changed, 14 insertions(+), 1 deletion(-) diff --git a/include/linux/slub_def.h b/include/linux/slub_def.h index 09fa2c6f0e68..3a1a1dbc6f49 100644 --- a/include/linux/slub_def.h +++ b/include/linux/slub_def.h @@ -155,8 +155,12 @@ struct kmem_cache { #ifdef CONFIG_SYSFS #define SLAB_SUPPORTS_SYSFS +void sysfs_slab_unlink(struct kmem_cache *); void sysfs_slab_release(struct kmem_cache *); #else +static inline void sysfs_slab_unlink(struct kmem_cache *s) +{ +} static inline void sysfs_slab_release(struct kmem_cache *s) { } diff --git a/mm/slab_common.c b/mm/slab_common.c index 890b1f04a03a..2296caf87bfb 100644 --- a/mm/slab_common.c +++ b/mm/slab_common.c @@ -567,10 +567,14 @@ static int shutdown_cache(struct kmem_cache *s) list_del(&s->list); if (s->flags & SLAB_TYPESAFE_BY_RCU) { +#ifdef SLAB_SUPPORTS_SYSFS + sysfs_slab_unlink(s); +#endif list_add_tail(&s->list, &slab_caches_to_rcu_destroy); schedule_work(&slab_caches_to_rcu_destroy_work); } else { #ifdef SLAB_SUPPORTS_SYSFS + sysfs_slab_unlink(s); sysfs_slab_release(s); #else slab_kmem_cache_release(s); diff --git a/mm/slub.c b/mm/slub.c index a3b8467c14af..51258eff4178 100644 --- a/mm/slub.c +++ b/mm/slub.c @@ -5667,7 +5667,6 @@ static void sysfs_slab_remove_workfn(struct work_struct *work) kset_unregister(s->memcg_kset); #endif kobject_uevent(&s->kobj, KOBJ_REMOVE); - kobject_del(&s->kobj); out: kobject_put(&s->kobj); } @@ -5752,6 +5751,12 @@ static void sysfs_slab_remove(struct kmem_cache *s) schedule_work(&s->kobj_remove_work); } +void sysfs_slab_unlink(struct kmem_cache *s) +{ + if (slab_state >= FULL) + kobject_del(&s->kobj); +} + void sysfs_slab_release(struct kmem_cache *s) { if (slab_state >= FULL) -- cgit v1.2.3 From 124049decbb121ec32742c94fb5d9d6bed8f24d8 Mon Sep 17 00:00:00 2001 From: Naoya Horiguchi Date: Wed, 27 Jun 2018 23:26:13 -0700 Subject: x86/e820: put !E820_TYPE_RAM regions into memblock.reserved There is a kernel panic that is triggered when reading /proc/kpageflags on the kernel booted with kernel parameter 'memmap=nn[KMG]!ss[KMG]': BUG: unable to handle kernel paging request at fffffffffffffffe PGD 9b20e067 P4D 9b20e067 PUD 9b210067 PMD 0 Oops: 0000 [#1] SMP PTI CPU: 2 PID: 1728 Comm: page-types Not tainted 4.17.0-rc6-mm1-v4.17-rc6-180605-0816-00236-g2dfb086ef02c+ #160 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.fc28 04/01/2014 RIP: 0010:stable_page_flags+0x27/0x3c0 Code: 00 00 00 0f 1f 44 00 00 48 85 ff 0f 84 a0 03 00 00 41 54 55 49 89 fc 53 48 8b 57 08 48 8b 2f 48 8d 42 ff 83 e2 01 48 0f 44 c7 <48> 8b 00 f6 c4 01 0f 84 10 03 00 00 31 db 49 8b 54 24 08 4c 89 e7 RSP: 0018:ffffbbd44111fde0 EFLAGS: 00010202 RAX: fffffffffffffffe RBX: 00007fffffffeff9 RCX: 0000000000000000 RDX: 0000000000000001 RSI: 0000000000000202 RDI: ffffed1182fff5c0 RBP: ffffffffffffffff R08: 0000000000000001 R09: 0000000000000001 R10: ffffbbd44111fed8 R11: 0000000000000000 R12: ffffed1182fff5c0 R13: 00000000000bffd7 R14: 0000000002fff5c0 R15: ffffbbd44111ff10 FS: 00007efc4335a500(0000) GS:ffff93a5bfc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: fffffffffffffffe CR3: 00000000b2a58000 CR4: 00000000001406e0 Call Trace: kpageflags_read+0xc7/0x120 proc_reg_read+0x3c/0x60 __vfs_read+0x36/0x170 vfs_read+0x89/0x130 ksys_pread64+0x71/0x90 do_syscall_64+0x5b/0x160 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7efc42e75e23 Code: 09 00 ba 9f 01 00 00 e8 ab 81 f4 ff 66 2e 0f 1f 84 00 00 00 00 00 90 83 3d 29 0a 2d 00 00 75 13 49 89 ca b8 11 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 34 c3 48 83 ec 08 e8 db d3 01 00 48 89 04 24 According to kernel bisection, this problem became visible due to commit f7f99100d8d9 ("mm: stop zeroing memory during allocation in vmemmap") which changes how struct pages are initialized. Memblock layout affects the pfn ranges covered by node/zone. Consider that we have a VM with 2 NUMA nodes and each node has 4GB memory, and the default (no memmap= given) memblock layout is like below: MEMBLOCK configuration: memory size = 0x00000001fff75c00 reserved size = 0x000000000300c000 memory.cnt = 0x4 memory[0x0] [0x0000000000001000-0x000000000009efff], 0x000000000009e000 bytes on node 0 flags: 0x0 memory[0x1] [0x0000000000100000-0x00000000bffd6fff], 0x00000000bfed7000 bytes on node 0 flags: 0x0 memory[0x2] [0x0000000100000000-0x000000013fffffff], 0x0000000040000000 bytes on node 0 flags: 0x0 memory[0x3] [0x0000000140000000-0x000000023fffffff], 0x0000000100000000 bytes on node 1 flags: 0x0 ... If you give memmap=1G!4G (so it just covers memory[0x2]), the range [0x100000000-0x13fffffff] is gone: MEMBLOCK configuration: memory size = 0x00000001bff75c00 reserved size = 0x000000000300c000 memory.cnt = 0x3 memory[0x0] [0x0000000000001000-0x000000000009efff], 0x000000000009e000 bytes on node 0 flags: 0x0 memory[0x1] [0x0000000000100000-0x00000000bffd6fff], 0x00000000bfed7000 bytes on node 0 flags: 0x0 memory[0x2] [0x0000000140000000-0x000000023fffffff], 0x0000000100000000 bytes on node 1 flags: 0x0 ... This causes shrinking node 0's pfn range because it is calculated by the address range of memblock.memory. So some of struct pages in the gap range are left uninitialized. We have a function zero_resv_unavail() which does zeroing the struct pages within the reserved unavailable range (i.e. memblock.memory && !memblock.reserved). This patch utilizes it to cover all unavailable ranges by putting them into memblock.reserved. Link: http://lkml.kernel.org/r/20180615072947.GB23273@hori1.linux.bs1.fc.nec.co.jp Fixes: f7f99100d8d9 ("mm: stop zeroing memory during allocation in vmemmap") Signed-off-by: Naoya Horiguchi Tested-by: Oscar Salvador Tested-by: "Herton R. Krzesinski" Acked-by: Michal Hocko Reviewed-by: Pavel Tatashin Cc: Steven Sistare Cc: Daniel Jordan Cc: Matthew Wilcox Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/x86/kernel/e820.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c index d1f25c831447..c88c23c658c1 100644 --- a/arch/x86/kernel/e820.c +++ b/arch/x86/kernel/e820.c @@ -1248,6 +1248,7 @@ void __init e820__memblock_setup(void) { int i; u64 end; + u64 addr = 0; /* * The bootstrap memblock region count maximum is 128 entries @@ -1264,13 +1265,21 @@ void __init e820__memblock_setup(void) struct e820_entry *entry = &e820_table->entries[i]; end = entry->addr + entry->size; + if (addr < entry->addr) + memblock_reserve(addr, entry->addr - addr); + addr = end; if (end != (resource_size_t)end) continue; + /* + * all !E820_TYPE_RAM ranges (including gap ranges) are put + * into memblock.reserved to make sure that struct pages in + * such regions are not left uninitialized after bootup. + */ if (entry->type != E820_TYPE_RAM && entry->type != E820_TYPE_RESERVED_KERN) - continue; - - memblock_add(entry->addr, entry->size); + memblock_reserve(entry->addr, entry->size); + else + memblock_add(entry->addr, entry->size); } /* Throw away partial pages: */ -- cgit v1.2.3 From f77bc3a82ce58fe7977a11f28e0b6cac8a9e087c Mon Sep 17 00:00:00 2001 From: Souptick Joarder Date: Wed, 27 Jun 2018 23:26:17 -0700 Subject: include/linux/dax.h: dax_iomap_fault() returns vm_fault_t Commit 1c8f422059ae ("mm: change return type to vm_fault_t") missed a conversion. It's not a big problem at present because mainline is still using typedef int vm_fault_t; Fixes: 1c8f422059ae ("mm: change return type to vm_fault_t") Link: http://lkml.kernel.org/r/20180620172046.GA27894@jordon-HP-15-Notebook-PC Signed-off-by: Souptick Joarder Reviewed-by: Andrew Morton Cc: Matthew Wilcox Cc: Dan Williams Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/dax.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/dax.h b/include/linux/dax.h index 3855e3800f48..deb0f663252f 100644 --- a/include/linux/dax.h +++ b/include/linux/dax.h @@ -135,7 +135,7 @@ void dax_flush(struct dax_device *dax_dev, void *addr, size_t size); ssize_t dax_iomap_rw(struct kiocb *iocb, struct iov_iter *iter, const struct iomap_ops *ops); -int dax_iomap_fault(struct vm_fault *vmf, enum page_entry_size pe_size, +vm_fault_t dax_iomap_fault(struct vm_fault *vmf, enum page_entry_size pe_size, pfn_t *pfnp, int *errp, const struct iomap_ops *ops); vm_fault_t dax_finish_sync_fault(struct vm_fault *vmf, enum page_entry_size pe_size, pfn_t pfn); -- cgit v1.2.3 From dd275caf4a0d9b219fffe49288b6cc33cd564312 Mon Sep 17 00:00:00 2001 From: "Jason A. Donenfeld" Date: Wed, 27 Jun 2018 23:26:20 -0700 Subject: kasan: depend on CONFIG_SLUB_DEBUG KASAN depends on having access to some of the accounting that SLUB_DEBUG does; without it, there are immediate crashes [1]. So, the natural thing to do is to make KASAN select SLUB_DEBUG. [1] http://lkml.kernel.org/r/CAHmME9rtoPwxUSnktxzKso14iuVCWT7BE_-_8PAC=pGw1iJnQg@mail.gmail.com Link: http://lkml.kernel.org/r/20180622154623.25388-1-Jason@zx2c4.com Fixes: f9e13c0a5a33 ("slab, slub: skip unnecessary kasan_cache_shutdown()") Signed-off-by: Jason A. Donenfeld Acked-by: Michal Hocko Reviewed-by: Shakeel Butt Acked-by: Christoph Lameter Cc: Shakeel Butt Cc: David Rientjes Cc: Pekka Enberg Cc: Joonsoo Kim Cc: Andrey Ryabinin Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- lib/Kconfig.kasan | 1 + 1 file changed, 1 insertion(+) diff --git a/lib/Kconfig.kasan b/lib/Kconfig.kasan index 3d35d062970d..c253c1b46c6b 100644 --- a/lib/Kconfig.kasan +++ b/lib/Kconfig.kasan @@ -6,6 +6,7 @@ if HAVE_ARCH_KASAN config KASAN bool "KASan: runtime memory debugger" depends on SLUB || (SLAB && !DEBUG_SLAB) + select SLUB_DEBUG if SLUB select CONSTRUCTORS select STACKDEPOT help -- cgit v1.2.3 From 008e682b5bf1bdd735b2eecf2f3903d7da49dd52 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Wed, 27 Jun 2018 23:26:24 -0700 Subject: proc: add Alexey to MAINTAINERS I know I'll regret it. Link: http://lkml.kernel.org/r/20180627194840.GA18113@avx2 Signed-off-by: Alexey Dobriyan Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index bfb8a18d4793..07d1576fc766 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -11481,6 +11481,15 @@ W: http://wireless.kernel.org/en/users/Drivers/p54 S: Obsolete F: drivers/net/wireless/intersil/prism54/ +PROC FILESYSTEM +R: Alexey Dobriyan +L: linux-kernel@vger.kernel.org +L: linux-fsdevel@vger.kernel.org +S: Maintained +F: fs/proc/ +F: include/linux/proc_fs.h +F: tools/testing/selftests/proc/ + PROC SYSCTL M: "Luis R. Rodriguez" M: Kees Cook -- cgit v1.2.3 From bda3153998f3eb2cafa4a6311971143628eacdbc Mon Sep 17 00:00:00 2001 From: BingJing Chang Date: Thu, 28 Jun 2018 18:40:11 +0800 Subject: md/raid10: fix that replacement cannot complete recovery after reassemble During assemble, the spare marked for replacement is not checked. conf->fullsync cannot be updated to be 1. As a result, recovery will treat it as a clean array. All recovering sectors are skipped. Original device is replaced with the not-recovered spare. mdadm -C /dev/md0 -l10 -n4 -pn2 /dev/loop[0123] mdadm /dev/md0 -a /dev/loop4 mdadm /dev/md0 --replace /dev/loop0 mdadm -S /dev/md0 # stop array during recovery mdadm -A /dev/md0 /dev/loop[01234] After reassemble, you can see recovery go on, but it completes immediately. In fact, recovery is not actually processed. To solve this problem, we just add the missing logics for replacment spares. (In raid1.c or raid5.c, they have already been checked.) Reported-by: Alex Chen Reviewed-by: Alex Wu Reviewed-by: Chung-Chiang Cheng Signed-off-by: BingJing Chang Signed-off-by: Shaohua Li --- drivers/md/raid10.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index 478cf446827f..35bd3a62451b 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -3893,6 +3893,13 @@ static int raid10_run(struct mddev *mddev) disk->rdev->saved_raid_disk < 0) conf->fullsync = 1; } + + if (disk->replacement && + !test_bit(In_sync, &disk->replacement->flags) && + disk->replacement->saved_raid_disk < 0) { + conf->fullsync = 1; + } + disk->recovery_disabled = mddev->recovery_disabled - 1; } -- cgit v1.2.3 From 4557641b4c7046625c026fb809c47ef0d43ae595 Mon Sep 17 00:00:00 2001 From: Ross Zwisler Date: Tue, 26 Jun 2018 16:30:39 -0600 Subject: pmem: only set QUEUE_FLAG_DAX for fsdax mode QUEUE_FLAG_DAX is an indication that a given block device supports filesystem DAX and should not be set for PMEM namespaces which are in "raw" mode. These namespaces lack struct page and are prevented from participating in filesystem DAX as of commit 569d0365f571 ("dax: require 'struct page' by default for filesystem dax"). Signed-off-by: Ross Zwisler Suggested-by: Mike Snitzer Fixes: 569d0365f571 ("dax: require 'struct page' by default for filesystem dax") Cc: stable@vger.kernel.org Acked-by: Dan Williams Reviewed-by: Toshi Kani Signed-off-by: Mike Snitzer --- drivers/nvdimm/pmem.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/nvdimm/pmem.c b/drivers/nvdimm/pmem.c index 68940356cad3..8b1fd7f1a224 100644 --- a/drivers/nvdimm/pmem.c +++ b/drivers/nvdimm/pmem.c @@ -414,7 +414,8 @@ static int pmem_attach_disk(struct device *dev, blk_queue_logical_block_size(q, pmem_sector_size(ndns)); blk_queue_max_hw_sectors(q, UINT_MAX); blk_queue_flag_set(QUEUE_FLAG_NONROT, q); - blk_queue_flag_set(QUEUE_FLAG_DAX, q); + if (pmem->pfn_flags & PFN_MAP) + blk_queue_flag_set(QUEUE_FLAG_DAX, q); q->queuedata = pmem; disk = alloc_disk_node(0, nid); -- cgit v1.2.3 From 15256f6cc4b44f2e70503758150267fd2a53c0d6 Mon Sep 17 00:00:00 2001 From: Ross Zwisler Date: Tue, 26 Jun 2018 16:30:40 -0600 Subject: dax: check for QUEUE_FLAG_DAX in bdev_dax_supported() Add an explicit check for QUEUE_FLAG_DAX to __bdev_dax_supported(). This is needed for DM configurations where the first element in the dm-linear or dm-stripe target supports DAX, but other elements do not. Without this check __bdev_dax_supported() will pass for such devices, letting a filesystem on that device mount with the DAX option. Signed-off-by: Ross Zwisler Suggested-by: Mike Snitzer Fixes: commit 545ed20e6df6 ("dm: add infrastructure for DAX support") Cc: stable@vger.kernel.org Acked-by: Dan Williams Reviewed-by: Toshi Kani Signed-off-by: Mike Snitzer --- drivers/dax/super.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/dax/super.c b/drivers/dax/super.c index 903d9c473749..45276abf03aa 100644 --- a/drivers/dax/super.c +++ b/drivers/dax/super.c @@ -86,6 +86,7 @@ bool __bdev_dax_supported(struct block_device *bdev, int blocksize) { struct dax_device *dax_dev; bool dax_enabled = false; + struct request_queue *q; pgoff_t pgoff; int err, id; void *kaddr; @@ -99,6 +100,13 @@ bool __bdev_dax_supported(struct block_device *bdev, int blocksize) return false; } + q = bdev_get_queue(bdev); + if (!q || !blk_queue_dax(q)) { + pr_debug("%s: error: request queue doesn't support dax\n", + bdevname(bdev, buf)); + return false; + } + err = bdev_dax_pgoff(bdev, 0, PAGE_SIZE, &pgoff); if (err) { pr_debug("%s: error: unaligned partition for dax\n", -- cgit v1.2.3 From dbc626597c39b24cefce09fbd8e9dea85869a801 Mon Sep 17 00:00:00 2001 From: Ross Zwisler Date: Tue, 26 Jun 2018 16:30:41 -0600 Subject: dm: prevent DAX mounts if not supported Currently device_supports_dax() just checks to see if the QUEUE_FLAG_DAX flag is set on the device's request queue to decide whether or not the device supports filesystem DAX. Really we should be using bdev_dax_supported() like filesystems do at mount time. This performs other tests like checking to make sure the dax_direct_access() path works. We also explicitly clear QUEUE_FLAG_DAX on the DM device's request queue if any of the underlying devices do not support DAX. This makes the handling of QUEUE_FLAG_DAX consistent with the setting/clearing of most other flags in dm_table_set_restrictions(). Now that bdev_dax_supported() explicitly checks for QUEUE_FLAG_DAX, this will ensure that filesystems built upon DM devices will only be able to mount with DAX if all underlying devices also support DAX. Signed-off-by: Ross Zwisler Fixes: commit 545ed20e6df6 ("dm: add infrastructure for DAX support") Cc: stable@vger.kernel.org Acked-by: Dan Williams Reviewed-by: Toshi Kani Signed-off-by: Mike Snitzer --- drivers/md/dm-table.c | 7 ++++--- drivers/md/dm.c | 3 +-- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c index 938766794c2e..3d0e2c198f06 100644 --- a/drivers/md/dm-table.c +++ b/drivers/md/dm-table.c @@ -885,9 +885,7 @@ EXPORT_SYMBOL_GPL(dm_table_set_type); static int device_supports_dax(struct dm_target *ti, struct dm_dev *dev, sector_t start, sector_t len, void *data) { - struct request_queue *q = bdev_get_queue(dev->bdev); - - return q && blk_queue_dax(q); + return bdev_dax_supported(dev->bdev, PAGE_SIZE); } static bool dm_table_supports_dax(struct dm_table *t) @@ -1907,6 +1905,9 @@ void dm_table_set_restrictions(struct dm_table *t, struct request_queue *q, if (dm_table_supports_dax(t)) blk_queue_flag_set(QUEUE_FLAG_DAX, q); + else + blk_queue_flag_clear(QUEUE_FLAG_DAX, q); + if (dm_table_supports_dax_write_cache(t)) dax_write_cache(t->md->dax_dev, true); diff --git a/drivers/md/dm.c b/drivers/md/dm.c index a3b103e8e3ce..b0dd7027848b 100644 --- a/drivers/md/dm.c +++ b/drivers/md/dm.c @@ -1056,8 +1056,7 @@ static long dm_dax_direct_access(struct dax_device *dax_dev, pgoff_t pgoff, if (len < 1) goto out; nr_pages = min(len, nr_pages); - if (ti->type->direct_access) - ret = ti->type->direct_access(ti, pgoff, nr_pages, kaddr, pfn); + ret = ti->type->direct_access(ti, pgoff, nr_pages, kaddr, pfn); out: dm_put_live_table(md, srcu_idx); -- cgit v1.2.3 From 63ba82c0e63f1dd400d84e12f2142c2cb691aec1 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Thu, 28 Jun 2018 22:21:24 +0200 Subject: parisc: Reduce debug output in unwind code Signed-off-by: Helge Deller --- arch/parisc/kernel/unwind.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/parisc/kernel/unwind.c b/arch/parisc/kernel/unwind.c index 143f90e2f9f3..2ef83d78eec4 100644 --- a/arch/parisc/kernel/unwind.c +++ b/arch/parisc/kernel/unwind.c @@ -25,7 +25,7 @@ /* #define DEBUG 1 */ #ifdef DEBUG -#define dbg(x...) printk(x) +#define dbg(x...) pr_debug(x) #else #define dbg(x...) #endif @@ -182,7 +182,7 @@ int __init unwind_init(void) start = (long)&__start___unwind[0]; stop = (long)&__stop___unwind[0]; - printk("unwind_init: start = 0x%lx, end = 0x%lx, entries = %lu\n", + dbg("unwind_init: start = 0x%lx, end = 0x%lx, entries = %lu\n", start, stop, (stop - start) / sizeof(struct unwind_table_entry)); -- cgit v1.2.3 From 3203c9010060806ff88c9989aeab4dc8d9a474dc Mon Sep 17 00:00:00 2001 From: Kleber Sacilotto de Souza Date: Wed, 27 Jun 2018 17:19:21 +0200 Subject: test_bpf: flag tests that cannot be jited on s390 Flag with FLAG_EXPECTED_FAIL the BPF_MAXINSNS tests that cannot be jited on s390 because they exceed BPF_SIZE_MAX and fail when CONFIG_BPF_JIT_ALWAYS_ON is set. Also set .expected_errcode to -ENOTSUPP so the tests pass in that case. Signed-off-by: Kleber Sacilotto de Souza Acked-by: Song Liu Signed-off-by: Daniel Borkmann --- lib/test_bpf.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/lib/test_bpf.c b/lib/test_bpf.c index 60aedc879361..08d3d59dca17 100644 --- a/lib/test_bpf.c +++ b/lib/test_bpf.c @@ -5282,21 +5282,31 @@ static struct bpf_test tests[] = { { /* Mainly checking JIT here. */ "BPF_MAXINSNS: Ctx heavy transformations", { }, +#if defined(CONFIG_BPF_JIT_ALWAYS_ON) && defined(CONFIG_S390) + CLASSIC | FLAG_EXPECTED_FAIL, +#else CLASSIC, +#endif { }, { { 1, !!(SKB_VLAN_TCI & VLAN_TAG_PRESENT) }, { 10, !!(SKB_VLAN_TCI & VLAN_TAG_PRESENT) } }, .fill_helper = bpf_fill_maxinsns6, + .expected_errcode = -ENOTSUPP, }, { /* Mainly checking JIT here. */ "BPF_MAXINSNS: Call heavy transformations", { }, +#if defined(CONFIG_BPF_JIT_ALWAYS_ON) && defined(CONFIG_S390) + CLASSIC | FLAG_NO_DATA | FLAG_EXPECTED_FAIL, +#else CLASSIC | FLAG_NO_DATA, +#endif { }, { { 1, 0 }, { 10, 0 } }, .fill_helper = bpf_fill_maxinsns7, + .expected_errcode = -ENOTSUPP, }, { /* Mainly checking JIT here. */ "BPF_MAXINSNS: Jump heavy test", @@ -5347,18 +5357,28 @@ static struct bpf_test tests[] = { { "BPF_MAXINSNS: exec all MSH", { }, +#if defined(CONFIG_BPF_JIT_ALWAYS_ON) && defined(CONFIG_S390) + CLASSIC | FLAG_EXPECTED_FAIL, +#else CLASSIC, +#endif { 0xfa, 0xfb, 0xfc, 0xfd, }, { { 4, 0xababab83 } }, .fill_helper = bpf_fill_maxinsns13, + .expected_errcode = -ENOTSUPP, }, { "BPF_MAXINSNS: ld_abs+get_processor_id", { }, +#if defined(CONFIG_BPF_JIT_ALWAYS_ON) && defined(CONFIG_S390) + CLASSIC | FLAG_EXPECTED_FAIL, +#else CLASSIC, +#endif { }, { { 1, 0xbee } }, .fill_helper = bpf_fill_ld_abs_get_processor_id, + .expected_errcode = -ENOTSUPP, }, /* * LD_IND / LD_ABS on fragmented SKBs -- cgit v1.2.3 From 4c79579b44b1876444f4d04de31c1a37098a0350 Mon Sep 17 00:00:00 2001 From: David Ahern Date: Tue, 26 Jun 2018 16:21:18 -0700 Subject: bpf: Change bpf_fib_lookup to return lookup status For ACLs implemented using either FIB rules or FIB entries, the BPF program needs the FIB lookup status to be able to drop the packet. Since the bpf_fib_lookup API has not reached a released kernel yet, change the return code to contain an encoding of the FIB lookup result and return the nexthop device index in the params struct. In addition, inform the BPF program of any post FIB lookup reason as to why the packet needs to go up the stack. The fib result for unicast routes must have an egress device, so remove the check that it is non-NULL. Signed-off-by: David Ahern Signed-off-by: Daniel Borkmann --- include/uapi/linux/bpf.h | 28 ++++++++++++--- net/core/filter.c | 86 +++++++++++++++++++++++++++++----------------- samples/bpf/xdp_fwd_kern.c | 8 ++--- 3 files changed, 81 insertions(+), 41 deletions(-) diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h index 59b19b6a40d7..b7db3261c62d 100644 --- a/include/uapi/linux/bpf.h +++ b/include/uapi/linux/bpf.h @@ -1857,7 +1857,8 @@ union bpf_attr { * is resolved), the nexthop address is returned in ipv4_dst * or ipv6_dst based on family, smac is set to mac address of * egress device, dmac is set to nexthop mac address, rt_metric - * is set to metric from route (IPv4/IPv6 only). + * is set to metric from route (IPv4/IPv6 only), and ifindex + * is set to the device index of the nexthop from the FIB lookup. * * *plen* argument is the size of the passed in struct. * *flags* argument can be a combination of one or more of the @@ -1873,9 +1874,10 @@ union bpf_attr { * *ctx* is either **struct xdp_md** for XDP programs or * **struct sk_buff** tc cls_act programs. * Return - * Egress device index on success, 0 if packet needs to continue - * up the stack for further processing or a negative error in case - * of failure. + * * < 0 if any input argument is invalid + * * 0 on success (packet is forwarded, nexthop neighbor exists) + * * > 0 one of **BPF_FIB_LKUP_RET_** codes explaining why the + * * packet is not forwarded or needs assist from full stack * * int bpf_sock_hash_update(struct bpf_sock_ops_kern *skops, struct bpf_map *map, void *key, u64 flags) * Description @@ -2612,6 +2614,18 @@ struct bpf_raw_tracepoint_args { #define BPF_FIB_LOOKUP_DIRECT BIT(0) #define BPF_FIB_LOOKUP_OUTPUT BIT(1) +enum { + BPF_FIB_LKUP_RET_SUCCESS, /* lookup successful */ + BPF_FIB_LKUP_RET_BLACKHOLE, /* dest is blackholed; can be dropped */ + BPF_FIB_LKUP_RET_UNREACHABLE, /* dest is unreachable; can be dropped */ + BPF_FIB_LKUP_RET_PROHIBIT, /* dest not allowed; can be dropped */ + BPF_FIB_LKUP_RET_NOT_FWDED, /* packet is not forwarded */ + BPF_FIB_LKUP_RET_FWD_DISABLED, /* fwding is not enabled on ingress */ + BPF_FIB_LKUP_RET_UNSUPP_LWT, /* fwd requires encapsulation */ + BPF_FIB_LKUP_RET_NO_NEIGH, /* no neighbor entry for nh */ + BPF_FIB_LKUP_RET_FRAG_NEEDED, /* fragmentation required to fwd */ +}; + struct bpf_fib_lookup { /* input: network family for lookup (AF_INET, AF_INET6) * output: network family of egress nexthop @@ -2625,7 +2639,11 @@ struct bpf_fib_lookup { /* total length of packet from network header - used for MTU check */ __u16 tot_len; - __u32 ifindex; /* L3 device index for lookup */ + + /* input: L3 device index for lookup + * output: device index from FIB lookup + */ + __u32 ifindex; union { /* inputs to lookup */ diff --git a/net/core/filter.c b/net/core/filter.c index e7f12e9f598c..0ca6907d7efe 100644 --- a/net/core/filter.c +++ b/net/core/filter.c @@ -4073,8 +4073,9 @@ static int bpf_fib_set_fwd_params(struct bpf_fib_lookup *params, memcpy(params->smac, dev->dev_addr, ETH_ALEN); params->h_vlan_TCI = 0; params->h_vlan_proto = 0; + params->ifindex = dev->ifindex; - return dev->ifindex; + return 0; } #endif @@ -4098,7 +4099,7 @@ static int bpf_ipv4_fib_lookup(struct net *net, struct bpf_fib_lookup *params, /* verify forwarding is enabled on this interface */ in_dev = __in_dev_get_rcu(dev); if (unlikely(!in_dev || !IN_DEV_FORWARD(in_dev))) - return 0; + return BPF_FIB_LKUP_RET_FWD_DISABLED; if (flags & BPF_FIB_LOOKUP_OUTPUT) { fl4.flowi4_iif = 1; @@ -4123,7 +4124,7 @@ static int bpf_ipv4_fib_lookup(struct net *net, struct bpf_fib_lookup *params, tb = fib_get_table(net, tbid); if (unlikely(!tb)) - return 0; + return BPF_FIB_LKUP_RET_NOT_FWDED; err = fib_table_lookup(tb, &fl4, &res, FIB_LOOKUP_NOREF); } else { @@ -4135,8 +4136,20 @@ static int bpf_ipv4_fib_lookup(struct net *net, struct bpf_fib_lookup *params, err = fib_lookup(net, &fl4, &res, FIB_LOOKUP_NOREF); } - if (err || res.type != RTN_UNICAST) - return 0; + if (err) { + /* map fib lookup errors to RTN_ type */ + if (err == -EINVAL) + return BPF_FIB_LKUP_RET_BLACKHOLE; + if (err == -EHOSTUNREACH) + return BPF_FIB_LKUP_RET_UNREACHABLE; + if (err == -EACCES) + return BPF_FIB_LKUP_RET_PROHIBIT; + + return BPF_FIB_LKUP_RET_NOT_FWDED; + } + + if (res.type != RTN_UNICAST) + return BPF_FIB_LKUP_RET_NOT_FWDED; if (res.fi->fib_nhs > 1) fib_select_path(net, &res, &fl4, NULL); @@ -4144,19 +4157,16 @@ static int bpf_ipv4_fib_lookup(struct net *net, struct bpf_fib_lookup *params, if (check_mtu) { mtu = ip_mtu_from_fib_result(&res, params->ipv4_dst); if (params->tot_len > mtu) - return 0; + return BPF_FIB_LKUP_RET_FRAG_NEEDED; } nh = &res.fi->fib_nh[res.nh_sel]; /* do not handle lwt encaps right now */ if (nh->nh_lwtstate) - return 0; + return BPF_FIB_LKUP_RET_UNSUPP_LWT; dev = nh->nh_dev; - if (unlikely(!dev)) - return 0; - if (nh->nh_gw) params->ipv4_dst = nh->nh_gw; @@ -4166,10 +4176,10 @@ static int bpf_ipv4_fib_lookup(struct net *net, struct bpf_fib_lookup *params, * rcu_read_lock_bh is not needed here */ neigh = __ipv4_neigh_lookup_noref(dev, (__force u32)params->ipv4_dst); - if (neigh) - return bpf_fib_set_fwd_params(params, neigh, dev); + if (!neigh) + return BPF_FIB_LKUP_RET_NO_NEIGH; - return 0; + return bpf_fib_set_fwd_params(params, neigh, dev); } #endif @@ -4190,7 +4200,7 @@ static int bpf_ipv6_fib_lookup(struct net *net, struct bpf_fib_lookup *params, /* link local addresses are never forwarded */ if (rt6_need_strict(dst) || rt6_need_strict(src)) - return 0; + return BPF_FIB_LKUP_RET_NOT_FWDED; dev = dev_get_by_index_rcu(net, params->ifindex); if (unlikely(!dev)) @@ -4198,7 +4208,7 @@ static int bpf_ipv6_fib_lookup(struct net *net, struct bpf_fib_lookup *params, idev = __in6_dev_get_safely(dev); if (unlikely(!idev || !net->ipv6.devconf_all->forwarding)) - return 0; + return BPF_FIB_LKUP_RET_FWD_DISABLED; if (flags & BPF_FIB_LOOKUP_OUTPUT) { fl6.flowi6_iif = 1; @@ -4225,7 +4235,7 @@ static int bpf_ipv6_fib_lookup(struct net *net, struct bpf_fib_lookup *params, tb = ipv6_stub->fib6_get_table(net, tbid); if (unlikely(!tb)) - return 0; + return BPF_FIB_LKUP_RET_NOT_FWDED; f6i = ipv6_stub->fib6_table_lookup(net, tb, oif, &fl6, strict); } else { @@ -4238,11 +4248,23 @@ static int bpf_ipv6_fib_lookup(struct net *net, struct bpf_fib_lookup *params, } if (unlikely(IS_ERR_OR_NULL(f6i) || f6i == net->ipv6.fib6_null_entry)) - return 0; + return BPF_FIB_LKUP_RET_NOT_FWDED; + + if (unlikely(f6i->fib6_flags & RTF_REJECT)) { + switch (f6i->fib6_type) { + case RTN_BLACKHOLE: + return BPF_FIB_LKUP_RET_BLACKHOLE; + case RTN_UNREACHABLE: + return BPF_FIB_LKUP_RET_UNREACHABLE; + case RTN_PROHIBIT: + return BPF_FIB_LKUP_RET_PROHIBIT; + default: + return BPF_FIB_LKUP_RET_NOT_FWDED; + } + } - if (unlikely(f6i->fib6_flags & RTF_REJECT || - f6i->fib6_type != RTN_UNICAST)) - return 0; + if (f6i->fib6_type != RTN_UNICAST) + return BPF_FIB_LKUP_RET_NOT_FWDED; if (f6i->fib6_nsiblings && fl6.flowi6_oif == 0) f6i = ipv6_stub->fib6_multipath_select(net, f6i, &fl6, @@ -4252,11 +4274,11 @@ static int bpf_ipv6_fib_lookup(struct net *net, struct bpf_fib_lookup *params, if (check_mtu) { mtu = ipv6_stub->ip6_mtu_from_fib6(f6i, dst, src); if (params->tot_len > mtu) - return 0; + return BPF_FIB_LKUP_RET_FRAG_NEEDED; } if (f6i->fib6_nh.nh_lwtstate) - return 0; + return BPF_FIB_LKUP_RET_UNSUPP_LWT; if (f6i->fib6_flags & RTF_GATEWAY) *dst = f6i->fib6_nh.nh_gw; @@ -4270,10 +4292,10 @@ static int bpf_ipv6_fib_lookup(struct net *net, struct bpf_fib_lookup *params, */ neigh = ___neigh_lookup_noref(ipv6_stub->nd_tbl, neigh_key_eq128, ndisc_hashfn, dst, dev); - if (neigh) - return bpf_fib_set_fwd_params(params, neigh, dev); + if (!neigh) + return BPF_FIB_LKUP_RET_NO_NEIGH; - return 0; + return bpf_fib_set_fwd_params(params, neigh, dev); } #endif @@ -4315,7 +4337,7 @@ BPF_CALL_4(bpf_skb_fib_lookup, struct sk_buff *, skb, struct bpf_fib_lookup *, params, int, plen, u32, flags) { struct net *net = dev_net(skb->dev); - int index = -EAFNOSUPPORT; + int rc = -EAFNOSUPPORT; if (plen < sizeof(*params)) return -EINVAL; @@ -4326,25 +4348,25 @@ BPF_CALL_4(bpf_skb_fib_lookup, struct sk_buff *, skb, switch (params->family) { #if IS_ENABLED(CONFIG_INET) case AF_INET: - index = bpf_ipv4_fib_lookup(net, params, flags, false); + rc = bpf_ipv4_fib_lookup(net, params, flags, false); break; #endif #if IS_ENABLED(CONFIG_IPV6) case AF_INET6: - index = bpf_ipv6_fib_lookup(net, params, flags, false); + rc = bpf_ipv6_fib_lookup(net, params, flags, false); break; #endif } - if (index > 0) { + if (!rc) { struct net_device *dev; - dev = dev_get_by_index_rcu(net, index); + dev = dev_get_by_index_rcu(net, params->ifindex); if (!is_skb_forwardable(dev, skb)) - index = 0; + rc = BPF_FIB_LKUP_RET_FRAG_NEEDED; } - return index; + return rc; } static const struct bpf_func_proto bpf_skb_fib_lookup_proto = { diff --git a/samples/bpf/xdp_fwd_kern.c b/samples/bpf/xdp_fwd_kern.c index 6673cdb9f55c..a7e94e7ff87d 100644 --- a/samples/bpf/xdp_fwd_kern.c +++ b/samples/bpf/xdp_fwd_kern.c @@ -48,9 +48,9 @@ static __always_inline int xdp_fwd_flags(struct xdp_md *ctx, u32 flags) struct ethhdr *eth = data; struct ipv6hdr *ip6h; struct iphdr *iph; - int out_index; u16 h_proto; u64 nh_off; + int rc; nh_off = sizeof(*eth); if (data + nh_off > data_end) @@ -101,7 +101,7 @@ static __always_inline int xdp_fwd_flags(struct xdp_md *ctx, u32 flags) fib_params.ifindex = ctx->ingress_ifindex; - out_index = bpf_fib_lookup(ctx, &fib_params, sizeof(fib_params), flags); + rc = bpf_fib_lookup(ctx, &fib_params, sizeof(fib_params), flags); /* verify egress index has xdp support * TO-DO bpf_map_lookup_elem(&tx_port, &key) fails with @@ -109,7 +109,7 @@ static __always_inline int xdp_fwd_flags(struct xdp_md *ctx, u32 flags) * NOTE: without verification that egress index supports XDP * forwarding packets are dropped. */ - if (out_index > 0) { + if (rc == 0) { if (h_proto == htons(ETH_P_IP)) ip_decrease_ttl(iph); else if (h_proto == htons(ETH_P_IPV6)) @@ -117,7 +117,7 @@ static __always_inline int xdp_fwd_flags(struct xdp_md *ctx, u32 flags) memcpy(eth->h_dest, fib_params.dmac, ETH_ALEN); memcpy(eth->h_source, fib_params.smac, ETH_ALEN); - return bpf_redirect_map(&tx_port, out_index, 0); + return bpf_redirect_map(&tx_port, fib_params.ifindex, 0); } return XDP_PASS; -- cgit v1.2.3 From 0da74120c5341389b97c4ee27487a97224999ee1 Mon Sep 17 00:00:00 2001 From: Jann Horn Date: Thu, 28 Jun 2018 20:39:54 -0400 Subject: selinux: move user accesses in selinuxfs out of locked regions If a user is accessing a file in selinuxfs with a pointer to a userspace buffer that is backed by e.g. a userfaultfd, the userspace access can stall indefinitely, which can block fsi->mutex if it is held. For sel_read_policy(), remove the locking, since this method doesn't seem to access anything that requires locking. For sel_read_bool(), move the user access below the locked region. For sel_write_bool() and sel_commit_bools_write(), move the user access up above the locked region. Cc: stable@vger.kernel.org Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Jann Horn Acked-by: Stephen Smalley [PM: removed an unused variable in sel_read_policy()] Signed-off-by: Paul Moore --- security/selinux/selinuxfs.c | 78 +++++++++++++++++++------------------------- 1 file changed, 33 insertions(+), 45 deletions(-) diff --git a/security/selinux/selinuxfs.c b/security/selinux/selinuxfs.c index c0cadbc5f85c..19e35dd695d7 100644 --- a/security/selinux/selinuxfs.c +++ b/security/selinux/selinuxfs.c @@ -441,22 +441,16 @@ static int sel_release_policy(struct inode *inode, struct file *filp) static ssize_t sel_read_policy(struct file *filp, char __user *buf, size_t count, loff_t *ppos) { - struct selinux_fs_info *fsi = file_inode(filp)->i_sb->s_fs_info; struct policy_load_memory *plm = filp->private_data; int ret; - mutex_lock(&fsi->mutex); - ret = avc_has_perm(&selinux_state, current_sid(), SECINITSID_SECURITY, SECCLASS_SECURITY, SECURITY__READ_POLICY, NULL); if (ret) - goto out; + return ret; - ret = simple_read_from_buffer(buf, count, ppos, plm->data, plm->len); -out: - mutex_unlock(&fsi->mutex); - return ret; + return simple_read_from_buffer(buf, count, ppos, plm->data, plm->len); } static vm_fault_t sel_mmap_policy_fault(struct vm_fault *vmf) @@ -1188,25 +1182,29 @@ static ssize_t sel_read_bool(struct file *filep, char __user *buf, ret = -EINVAL; if (index >= fsi->bool_num || strcmp(name, fsi->bool_pending_names[index])) - goto out; + goto out_unlock; ret = -ENOMEM; page = (char *)get_zeroed_page(GFP_KERNEL); if (!page) - goto out; + goto out_unlock; cur_enforcing = security_get_bool_value(fsi->state, index); if (cur_enforcing < 0) { ret = cur_enforcing; - goto out; + goto out_unlock; } length = scnprintf(page, PAGE_SIZE, "%d %d", cur_enforcing, fsi->bool_pending_values[index]); - ret = simple_read_from_buffer(buf, count, ppos, page, length); -out: mutex_unlock(&fsi->mutex); + ret = simple_read_from_buffer(buf, count, ppos, page, length); +out_free: free_page((unsigned long)page); return ret; + +out_unlock: + mutex_unlock(&fsi->mutex); + goto out_free; } static ssize_t sel_write_bool(struct file *filep, const char __user *buf, @@ -1219,6 +1217,17 @@ static ssize_t sel_write_bool(struct file *filep, const char __user *buf, unsigned index = file_inode(filep)->i_ino & SEL_INO_MASK; const char *name = filep->f_path.dentry->d_name.name; + if (count >= PAGE_SIZE) + return -ENOMEM; + + /* No partial writes. */ + if (*ppos != 0) + return -EINVAL; + + page = memdup_user_nul(buf, count); + if (IS_ERR(page)) + return PTR_ERR(page); + mutex_lock(&fsi->mutex); length = avc_has_perm(&selinux_state, @@ -1233,22 +1242,6 @@ static ssize_t sel_write_bool(struct file *filep, const char __user *buf, fsi->bool_pending_names[index])) goto out; - length = -ENOMEM; - if (count >= PAGE_SIZE) - goto out; - - /* No partial writes. */ - length = -EINVAL; - if (*ppos != 0) - goto out; - - page = memdup_user_nul(buf, count); - if (IS_ERR(page)) { - length = PTR_ERR(page); - page = NULL; - goto out; - } - length = -EINVAL; if (sscanf(page, "%d", &new_value) != 1) goto out; @@ -1280,6 +1273,17 @@ static ssize_t sel_commit_bools_write(struct file *filep, ssize_t length; int new_value; + if (count >= PAGE_SIZE) + return -ENOMEM; + + /* No partial writes. */ + if (*ppos != 0) + return -EINVAL; + + page = memdup_user_nul(buf, count); + if (IS_ERR(page)) + return PTR_ERR(page); + mutex_lock(&fsi->mutex); length = avc_has_perm(&selinux_state, @@ -1289,22 +1293,6 @@ static ssize_t sel_commit_bools_write(struct file *filep, if (length) goto out; - length = -ENOMEM; - if (count >= PAGE_SIZE) - goto out; - - /* No partial writes. */ - length = -EINVAL; - if (*ppos != 0) - goto out; - - page = memdup_user_nul(buf, count); - if (IS_ERR(page)) { - length = PTR_ERR(page); - page = NULL; - goto out; - } - length = -EINVAL; if (sscanf(page, "%d", &new_value) != 1) goto out; -- cgit v1.2.3 From 2a2c8ee2d72c4f1ba0f7fbb02dc74f971df0f934 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sat, 16 Jun 2018 22:37:56 +0900 Subject: Revert "i2c: algo-bit: init the bus to a known state" This reverts commit 3e5f06bed72fe72166a6778f630241a893f67799. As per bugzilla #200045, this caused a regression. I don't really see a way to fix it without having the hardware. So, revert the patch and I will fix the issue I was seeing originally in the i2c-gpio driver itself. I couldn't find new users of this algorithm since, so there should be no one depending on the new behaviour. Reported-by: Sergey Larin Fixes: 3e5f06bed72f ("i2c: algo-bit: init the bus to a known state") Signed-off-by: Wolfram Sang Acked-by: Alex Deucher Tested-by: Sergey Larin Signed-off-by: Wolfram Sang Cc: stable@kernel.org --- drivers/i2c/algos/i2c-algo-bit.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/drivers/i2c/algos/i2c-algo-bit.c b/drivers/i2c/algos/i2c-algo-bit.c index 4a34f311e1ff..0c0eb16d710f 100644 --- a/drivers/i2c/algos/i2c-algo-bit.c +++ b/drivers/i2c/algos/i2c-algo-bit.c @@ -647,11 +647,6 @@ static int __i2c_bit_add_bus(struct i2c_adapter *adap, if (bit_adap->getscl == NULL) adap->quirks = &i2c_bit_quirk_no_clk_stretch; - /* Bring bus to a known state. Looks like STOP if bus is not free yet */ - setscl(bit_adap, 1); - udelay(bit_adap->udelay); - setsda(bit_adap, 1); - ret = add_adapter(adap); if (ret < 0) return ret; -- cgit v1.2.3 From 2173ed0adc7f0473e6b6ad636d8684a0d82da5e9 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sat, 16 Jun 2018 22:37:57 +0900 Subject: i2c: algos: bit: mention our experience about initial states So, if somebody wants to re-implement this in the future, we pinpoint to a problem case. Signed-off-by: Wolfram Sang Acked-by: Alex Deucher Signed-off-by: Wolfram Sang --- drivers/i2c/algos/i2c-algo-bit.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/i2c/algos/i2c-algo-bit.c b/drivers/i2c/algos/i2c-algo-bit.c index 0c0eb16d710f..6ec65adaba49 100644 --- a/drivers/i2c/algos/i2c-algo-bit.c +++ b/drivers/i2c/algos/i2c-algo-bit.c @@ -647,6 +647,11 @@ static int __i2c_bit_add_bus(struct i2c_adapter *adap, if (bit_adap->getscl == NULL) adap->quirks = &i2c_bit_quirk_no_clk_stretch; + /* + * We tried forcing SCL/SDA to an initial state here. But that caused a + * regression, sadly. Check Bugzilla #200045 for details. + */ + ret = add_adapter(adap); if (ret < 0) return ret; -- cgit v1.2.3 From 9aa613674f89d01248ae2e4afe691b515ff8fbb6 Mon Sep 17 00:00:00 2001 From: Peter Rosin Date: Wed, 20 Jun 2018 11:43:23 +0200 Subject: i2c: smbus: kill memory leak on emulated and failed DMA SMBus xfers If DMA safe memory was allocated, but the subsequent I2C transfer fails the memory is leaked. Plug this leak. Fixes: 8a77821e74d6 ("i2c: smbus: use DMA safe buffers for emulated SMBus transactions") Signed-off-by: Peter Rosin Signed-off-by: Wolfram Sang Cc: stable@kernel.org --- drivers/i2c/i2c-core-smbus.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) diff --git a/drivers/i2c/i2c-core-smbus.c b/drivers/i2c/i2c-core-smbus.c index f3f683041e7f..51970bae3c4a 100644 --- a/drivers/i2c/i2c-core-smbus.c +++ b/drivers/i2c/i2c-core-smbus.c @@ -465,15 +465,18 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter *adapter, u16 addr, status = i2c_transfer(adapter, msg, num); if (status < 0) - return status; - if (status != num) - return -EIO; + goto cleanup; + if (status != num) { + status = -EIO; + goto cleanup; + } + status = 0; /* Check PEC if last message is a read */ if (i && (msg[num-1].flags & I2C_M_RD)) { status = i2c_smbus_check_pec(partial_pec, &msg[num-1]); if (status < 0) - return status; + goto cleanup; } if (read_write == I2C_SMBUS_READ) @@ -499,12 +502,13 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter *adapter, u16 addr, break; } +cleanup: if (msg[0].flags & I2C_M_DMA_SAFE) kfree(msg[0].buf); if (msg[1].flags & I2C_M_DMA_SAFE) kfree(msg[1].buf); - return 0; + return status; } /** -- cgit v1.2.3 From 12b731dd46d9ee646318e6e9dc587314a3908a46 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sat, 16 Jun 2018 21:56:36 +0900 Subject: i2c: gpio: initialize SCL to HIGH again It seems that during the conversion from gpio* to gpiod*, the initial state of SCL was wrongly switched to LOW. Fix it to be HIGH again. Fixes: 7bb75029ef34 ("i2c: gpio: Enforce open drain through gpiolib") Signed-off-by: Wolfram Sang Tested-by: Geert Uytterhoeven Reviewed-by: Linus Walleij Signed-off-by: Wolfram Sang Cc: stable@kernel.org --- drivers/i2c/busses/i2c-gpio.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/i2c/busses/i2c-gpio.c b/drivers/i2c/busses/i2c-gpio.c index 005e6e0330c2..66f85bbf3591 100644 --- a/drivers/i2c/busses/i2c-gpio.c +++ b/drivers/i2c/busses/i2c-gpio.c @@ -279,9 +279,9 @@ static int i2c_gpio_probe(struct platform_device *pdev) * required for an I2C bus. */ if (pdata->scl_is_open_drain) - gflags = GPIOD_OUT_LOW; + gflags = GPIOD_OUT_HIGH; else - gflags = GPIOD_OUT_LOW_OPEN_DRAIN; + gflags = GPIOD_OUT_HIGH_OPEN_DRAIN; priv->scl = i2c_gpio_get_desc(dev, "scl", 1, gflags); if (IS_ERR(priv->scl)) return PTR_ERR(priv->scl); -- cgit v1.2.3 From e7441c9274a6a5453e06f4c2b8b5f72eca0a3f17 Mon Sep 17 00:00:00 2001 From: Denis Kenzior Date: Tue, 19 Jun 2018 10:39:50 -0500 Subject: mac80211: disable BHs/preemption in ieee80211_tx_control_port() On pre-emption enabled kernels the following print was being seen due to missing local_bh_disable/local_bh_enable calls. mac80211 assumes that pre-emption is disabled in the data path. BUG: using smp_processor_id() in preemptible [00000000] code: iwd/517 caller is __ieee80211_subif_start_xmit+0x144/0x210 [mac80211] [...] Call Trace: dump_stack+0x5c/0x80 check_preemption_disabled.cold.0+0x46/0x51 __ieee80211_subif_start_xmit+0x144/0x210 [mac80211] Fixes: 911806491425 ("mac80211: Add support for tx_control_port") Signed-off-by: Denis Kenzior [commit message rewrite, fixes tag] Signed-off-by: Johannes Berg --- net/mac80211/tx.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index 44b5dfe8727d..fa1f1e63a264 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -4845,7 +4845,9 @@ int ieee80211_tx_control_port(struct wiphy *wiphy, struct net_device *dev, skb_reset_network_header(skb); skb_reset_mac_header(skb); + local_bh_disable(); __ieee80211_subif_start_xmit(skb, skb->dev, flags); + local_bh_enable(); return 0; } -- cgit v1.2.3 From 188f60ab8e787fcbb5ac9d64ede23a0070231f09 Mon Sep 17 00:00:00 2001 From: Bob Copeland Date: Sun, 24 Jun 2018 21:10:49 -0400 Subject: nl80211: relax ht operation checks for mesh Commit 9757235f451c, "nl80211: correct checks for NL80211_MESHCONF_HT_OPMODE value") relaxed the range for the HT operation field in meshconf, while also adding checks requiring the non-greenfield and non-ht-sta bits to be set in certain circumstances. The latter bit is actually reserved for mesh BSSes according to Table 9-168 in 802.11-2016, so in fact it should not be set. wpa_supplicant sets these bits because the mesh and AP code share the same implementation, but authsae does not. As a result, some meshconf updates from authsae which set only the NONHT_MIXED protection bits were being rejected. In order to avoid breaking userspace by changing the rules again, simply accept the values with or without the bits set, and mask off the reserved bit to match the spec. While in here, update the 802.11-2012 reference to 802.11-2016. Fixes: 9757235f451c ("nl80211: correct checks for NL80211_MESHCONF_HT_OPMODE value") Cc: Masashi Honma Signed-off-by: Bob Copeland Reviewed-by: Masashi Honma Reviewed-by: Masashi Honma Signed-off-by: Johannes Berg --- net/wireless/nl80211.c | 19 +++---------------- 1 file changed, 3 insertions(+), 16 deletions(-) diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index c7bbe5f0aae8..351eeaf16abe 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -6231,7 +6231,7 @@ do { \ nl80211_check_s32); /* * Check HT operation mode based on - * IEEE 802.11 2012 8.4.2.59 HT Operation element. + * IEEE 802.11-2016 9.4.2.57 HT Operation element. */ if (tb[NL80211_MESHCONF_HT_OPMODE]) { ht_opmode = nla_get_u16(tb[NL80211_MESHCONF_HT_OPMODE]); @@ -6241,22 +6241,9 @@ do { \ IEEE80211_HT_OP_MODE_NON_HT_STA_PRSNT)) return -EINVAL; - if ((ht_opmode & IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT) && - (ht_opmode & IEEE80211_HT_OP_MODE_NON_HT_STA_PRSNT)) - return -EINVAL; + /* NON_HT_STA bit is reserved, but some programs set it */ + ht_opmode &= ~IEEE80211_HT_OP_MODE_NON_HT_STA_PRSNT; - switch (ht_opmode & IEEE80211_HT_OP_MODE_PROTECTION) { - case IEEE80211_HT_OP_MODE_PROTECTION_NONE: - case IEEE80211_HT_OP_MODE_PROTECTION_20MHZ: - if (ht_opmode & IEEE80211_HT_OP_MODE_NON_HT_STA_PRSNT) - return -EINVAL; - break; - case IEEE80211_HT_OP_MODE_PROTECTION_NONMEMBER: - case IEEE80211_HT_OP_MODE_PROTECTION_NONHT_MIXED: - if (!(ht_opmode & IEEE80211_HT_OP_MODE_NON_HT_STA_PRSNT)) - return -EINVAL; - break; - } cfg->ht_opmode = ht_opmode; mask |= (1 << (NL80211_MESHCONF_HT_OPMODE - 1)); } -- cgit v1.2.3 From 95bca62fb723a121954fc7ae5473bb2c1f0d5986 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 29 Jun 2018 09:33:39 +0200 Subject: nl80211: check nla_parse_nested() return values At the very least we should check the return value if nla_parse_nested() is called with a non-NULL policy. Signed-off-by: Johannes Berg --- net/wireless/nl80211.c | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-) diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 351eeaf16abe..4eece06be1e7 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -10949,9 +10949,12 @@ static int nl80211_set_wowlan(struct sk_buff *skb, struct genl_info *info) rem) { u8 *mask_pat; - nla_parse_nested(pat_tb, MAX_NL80211_PKTPAT, pat, - nl80211_packet_pattern_policy, - info->extack); + err = nla_parse_nested(pat_tb, MAX_NL80211_PKTPAT, pat, + nl80211_packet_pattern_policy, + info->extack); + if (err) + goto error; + err = -EINVAL; if (!pat_tb[NL80211_PKTPAT_MASK] || !pat_tb[NL80211_PKTPAT_PATTERN]) @@ -11200,8 +11203,11 @@ static int nl80211_parse_coalesce_rule(struct cfg80211_registered_device *rdev, rem) { u8 *mask_pat; - nla_parse_nested(pat_tb, MAX_NL80211_PKTPAT, pat, - nl80211_packet_pattern_policy, NULL); + err = nla_parse_nested(pat_tb, MAX_NL80211_PKTPAT, pat, + nl80211_packet_pattern_policy, NULL); + if (err) + return err; + if (!pat_tb[NL80211_PKTPAT_MASK] || !pat_tb[NL80211_PKTPAT_PATTERN]) return -EINVAL; -- cgit v1.2.3 From e699e2c6a654ff8d7303f5297ab5dd83da7b23e0 Mon Sep 17 00:00:00 2001 From: Shakeel Butt Date: Wed, 27 Jun 2018 15:16:42 -0700 Subject: net, mm: account sock objects to kmemcg Currently the kernel accounts the memory for network traffic through mem_cgroup_[un]charge_skmem() interface. However the memory accounted only includes the truesize of sk_buff which does not include the size of sock objects. In our production environment, with opt-out kmem accounting, the sock kmem caches (TCP[v6], UDP[v6], RAW[v6], UNIX) are among the top most charged kmem caches and consume a significant amount of memory which can not be left as system overhead. So, this patch converts the kmem caches of all sock objects to SLAB_ACCOUNT. Signed-off-by: Shakeel Butt Suggested-by: Eric Dumazet Reviewed-by: Kirill Tkhai Reviewed-by: Eric Dumazet Signed-off-by: David S. Miller --- net/core/sock.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/net/core/sock.c b/net/core/sock.c index bcc41829a16d..9e8f65585b81 100644 --- a/net/core/sock.c +++ b/net/core/sock.c @@ -3243,7 +3243,8 @@ static int req_prot_init(const struct proto *prot) rsk_prot->slab = kmem_cache_create(rsk_prot->slab_name, rsk_prot->obj_size, 0, - prot->slab_flags, NULL); + SLAB_ACCOUNT | prot->slab_flags, + NULL); if (!rsk_prot->slab) { pr_crit("%s: Can't create request sock SLAB cache!\n", @@ -3258,7 +3259,8 @@ int proto_register(struct proto *prot, int alloc_slab) if (alloc_slab) { prot->slab = kmem_cache_create_usercopy(prot->name, prot->obj_size, 0, - SLAB_HWCACHE_ALIGN | prot->slab_flags, + SLAB_HWCACHE_ALIGN | SLAB_ACCOUNT | + prot->slab_flags, prot->useroffset, prot->usersize, NULL); @@ -3281,6 +3283,7 @@ int proto_register(struct proto *prot, int alloc_slab) kmem_cache_create(prot->twsk_prot->twsk_slab_name, prot->twsk_prot->twsk_obj_size, 0, + SLAB_ACCOUNT | prot->slab_flags, NULL); if (prot->twsk_prot->twsk_slab == NULL) -- cgit v1.2.3 From e88958e6369aeba48623afa18dd67fdf41c98d75 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Fri, 29 Jun 2018 15:37:24 +0200 Subject: net: handle NULL ->poll gracefully The big aio poll revert broke various network protocols that don't implement ->poll as a patch in the aio poll serie removed sock_no_poll and made the common code handle this case. Reported-by: syzbot+57727883dbad76db2ef0@syzkaller.appspotmail.com Reported-by: syzbot+cdb0d3176b53d35ad454@syzkaller.appspotmail.com Reported-by: syzbot+2c7e8f74f8b2571c87e8@syzkaller.appspotmail.com Reported-by: Tetsuo Handa Fixes: a11e1d432b51 ("Revert changes to convert to ->poll_mask() and aio IOCB_CMD_POLL") Signed-off-by: Christoph Hellwig Signed-off-by: Linus Torvalds --- net/socket.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/socket.c b/net/socket.c index a564c6ed19d5..85633622c94d 100644 --- a/net/socket.c +++ b/net/socket.c @@ -1133,6 +1133,8 @@ static __poll_t sock_poll(struct file *file, poll_table *wait) __poll_t events = poll_requested_events(wait); sock_poll_busy_loop(sock, events); + if (!sock->ops->poll) + return 0; return sock->ops->poll(file, sock, wait) | sock_poll_busy_flag(sock); } -- cgit v1.2.3 From 2cd3ae2129736f9019130064d09713a375870941 Mon Sep 17 00:00:00 2001 From: Avi Kivity Date: Fri, 29 Jun 2018 15:37:25 +0200 Subject: aio: mark __aio_sigset::sigmask const io_pgetevents() will not change the signal mask. Mark it const to make it clear and to reduce the need for casts in user code. Reviewed-by: Christoph Hellwig Signed-off-by: Avi Kivity Signed-off-by: Al Viro [hch: reapply the patch that got incorrectly reverted] Signed-off-by: Christoph Hellwig Signed-off-by: Linus Torvalds --- include/uapi/linux/aio_abi.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/uapi/linux/aio_abi.h b/include/uapi/linux/aio_abi.h index d4e768d55d14..3c5038b587ba 100644 --- a/include/uapi/linux/aio_abi.h +++ b/include/uapi/linux/aio_abi.h @@ -111,7 +111,7 @@ struct iocb { #undef IFLITTLE struct __aio_sigset { - sigset_t __user *sigmask; + const sigset_t __user *sigmask; size_t sigsetsize; }; -- cgit v1.2.3 From 1f57f8d442f8017587eeebd8617913bfc3661d3d Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Thu, 28 Jun 2018 11:54:01 -0600 Subject: blk-mq: don't queue more if we get a busy return Some devices have different queue limits depending on the type of IO. A classic case is SATA NCQ, where some commands can queue, but others cannot. If we have NCQ commands inflight and encounter a non-queueable command, the driver returns busy. Currently we attempt to dispatch more from the scheduler, if we were able to queue some commands. But for the case where we ended up stopping due to BUSY, we should not attempt to retrieve more from the scheduler. If we do, we can get into a situation where we attempt to queue a non-queueable command, get BUSY, then successfully retrieve more commands from that scheduler and queue those. This can repeat forever, starving the non-queuable command indefinitely. Fix this by NOT attempting to pull more commands from the scheduler, if we get a BUSY return. This should also be more optimal in terms of letting requests stay in the scheduler for as long as possible, if we get a BUSY due to the regular out-of-tags condition. Reviewed-by: Omar Sandoval Reviewed-by: Ming Lei Signed-off-by: Jens Axboe --- block/blk-mq.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/block/blk-mq.c b/block/blk-mq.c index b6888ff556cf..d394cdd8d8c6 100644 --- a/block/blk-mq.c +++ b/block/blk-mq.c @@ -1075,6 +1075,9 @@ static bool blk_mq_mark_tag_wait(struct blk_mq_hw_ctx **hctx, #define BLK_MQ_RESOURCE_DELAY 3 /* ms units */ +/* + * Returns true if we did some work AND can potentially do more. + */ bool blk_mq_dispatch_rq_list(struct request_queue *q, struct list_head *list, bool got_budget) { @@ -1205,8 +1208,17 @@ bool blk_mq_dispatch_rq_list(struct request_queue *q, struct list_head *list, blk_mq_run_hw_queue(hctx, true); else if (needs_restart && (ret == BLK_STS_RESOURCE)) blk_mq_delay_run_hw_queue(hctx, BLK_MQ_RESOURCE_DELAY); + + return false; } + /* + * If the host/device is unable to accept more work, inform the + * caller of that. + */ + if (ret == BLK_STS_RESOURCE || ret == BLK_STS_DEV_RESOURCE) + return false; + return (queued + errors) != 0; } -- cgit v1.2.3 From fad2d4ef636654e926d374ef038f4cd4286661f6 Mon Sep 17 00:00:00 2001 From: Bart Van Assche Date: Mon, 25 Jun 2018 15:51:30 -0700 Subject: drbd: Fix drbd_request_prepare() discard handling Fix the test that verifies whether bio_op(bio) represents a discard or write zeroes operation. Compile-tested only. Cc: Philipp Reisner Cc: Lars Ellenberg Fixes: 7435e9018f91 ("drbd: zero-out partial unaligned discards on local backend") Signed-off-by: Bart Van Assche Reviewed-by: Christoph Hellwig Signed-off-by: Jens Axboe --- drivers/block/drbd/drbd_req.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/block/drbd/drbd_req.c b/drivers/block/drbd/drbd_req.c index a47e4987ee46..d146fedc38bb 100644 --- a/drivers/block/drbd/drbd_req.c +++ b/drivers/block/drbd/drbd_req.c @@ -1244,8 +1244,8 @@ drbd_request_prepare(struct drbd_device *device, struct bio *bio, unsigned long _drbd_start_io_acct(device, req); /* process discards always from our submitter thread */ - if ((bio_op(bio) & REQ_OP_WRITE_ZEROES) || - (bio_op(bio) & REQ_OP_DISCARD)) + if (bio_op(bio) == REQ_OP_WRITE_ZEROES || + bio_op(bio) == REQ_OP_DISCARD) goto queue_for_submitter_thread; if (rw == WRITE && req->private_bio && req->i.size -- cgit v1.2.3 From 9544bc5347207a68eb308cc8aaaed6c3a687cabd Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Fri, 29 Jun 2018 08:48:06 -0600 Subject: sg: remove ->sg_magic member This was introduced more than a decade ago when sg chaining was added, but we never really caught anything with it. The scatterlist entry size can be critical, since drivers allocate it, so remove the magic member. Recently it's been triggering allocation stalls and failures in NVMe. Tested-by: Jordan Glover Acked-by: Christoph Hellwig Signed-off-by: Jens Axboe --- drivers/gpu/drm/i915/i915_drv.h | 3 --- include/linux/scatterlist.h | 18 ------------------ lib/scatterlist.c | 6 ------ tools/virtio/linux/scatterlist.h | 18 ------------------ 4 files changed, 45 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 34c125e2d90c..9180f67746b4 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -2238,9 +2238,6 @@ static inline struct scatterlist *____sg_next(struct scatterlist *sg) **/ static inline struct scatterlist *__sg_next(struct scatterlist *sg) { -#ifdef CONFIG_DEBUG_SG - BUG_ON(sg->sg_magic != SG_MAGIC); -#endif return sg_is_last(sg) ? NULL : ____sg_next(sg); } diff --git a/include/linux/scatterlist.h b/include/linux/scatterlist.h index 51f52020ad5f..093aa57120b0 100644 --- a/include/linux/scatterlist.h +++ b/include/linux/scatterlist.h @@ -9,9 +9,6 @@ #include struct scatterlist { -#ifdef CONFIG_DEBUG_SG - unsigned long sg_magic; -#endif unsigned long page_link; unsigned int offset; unsigned int length; @@ -64,7 +61,6 @@ struct sg_table { * */ -#define SG_MAGIC 0x87654321 #define SG_CHAIN 0x01UL #define SG_END 0x02UL @@ -98,7 +94,6 @@ static inline void sg_assign_page(struct scatterlist *sg, struct page *page) */ BUG_ON((unsigned long) page & (SG_CHAIN | SG_END)); #ifdef CONFIG_DEBUG_SG - BUG_ON(sg->sg_magic != SG_MAGIC); BUG_ON(sg_is_chain(sg)); #endif sg->page_link = page_link | (unsigned long) page; @@ -129,7 +124,6 @@ static inline void sg_set_page(struct scatterlist *sg, struct page *page, static inline struct page *sg_page(struct scatterlist *sg) { #ifdef CONFIG_DEBUG_SG - BUG_ON(sg->sg_magic != SG_MAGIC); BUG_ON(sg_is_chain(sg)); #endif return (struct page *)((sg)->page_link & ~(SG_CHAIN | SG_END)); @@ -195,9 +189,6 @@ static inline void sg_chain(struct scatterlist *prv, unsigned int prv_nents, **/ static inline void sg_mark_end(struct scatterlist *sg) { -#ifdef CONFIG_DEBUG_SG - BUG_ON(sg->sg_magic != SG_MAGIC); -#endif /* * Set termination bit, clear potential chain bit */ @@ -215,9 +206,6 @@ static inline void sg_mark_end(struct scatterlist *sg) **/ static inline void sg_unmark_end(struct scatterlist *sg) { -#ifdef CONFIG_DEBUG_SG - BUG_ON(sg->sg_magic != SG_MAGIC); -#endif sg->page_link &= ~SG_END; } @@ -260,12 +248,6 @@ static inline void *sg_virt(struct scatterlist *sg) static inline void sg_init_marker(struct scatterlist *sgl, unsigned int nents) { -#ifdef CONFIG_DEBUG_SG - unsigned int i; - - for (i = 0; i < nents; i++) - sgl[i].sg_magic = SG_MAGIC; -#endif sg_mark_end(&sgl[nents - 1]); } diff --git a/lib/scatterlist.c b/lib/scatterlist.c index 06dad7a072fd..d4ae67d6cd1e 100644 --- a/lib/scatterlist.c +++ b/lib/scatterlist.c @@ -24,9 +24,6 @@ **/ struct scatterlist *sg_next(struct scatterlist *sg) { -#ifdef CONFIG_DEBUG_SG - BUG_ON(sg->sg_magic != SG_MAGIC); -#endif if (sg_is_last(sg)) return NULL; @@ -111,10 +108,7 @@ struct scatterlist *sg_last(struct scatterlist *sgl, unsigned int nents) for_each_sg(sgl, sg, nents, i) ret = sg; -#ifdef CONFIG_DEBUG_SG - BUG_ON(sgl[0].sg_magic != SG_MAGIC); BUG_ON(!sg_is_last(ret)); -#endif return ret; } EXPORT_SYMBOL(sg_last); diff --git a/tools/virtio/linux/scatterlist.h b/tools/virtio/linux/scatterlist.h index 9a45f90e2d08..369ee308b668 100644 --- a/tools/virtio/linux/scatterlist.h +++ b/tools/virtio/linux/scatterlist.h @@ -36,7 +36,6 @@ static inline void sg_assign_page(struct scatterlist *sg, struct page *page) */ BUG_ON((unsigned long) page & 0x03); #ifdef CONFIG_DEBUG_SG - BUG_ON(sg->sg_magic != SG_MAGIC); BUG_ON(sg_is_chain(sg)); #endif sg->page_link = page_link | (unsigned long) page; @@ -67,7 +66,6 @@ static inline void sg_set_page(struct scatterlist *sg, struct page *page, static inline struct page *sg_page(struct scatterlist *sg) { #ifdef CONFIG_DEBUG_SG - BUG_ON(sg->sg_magic != SG_MAGIC); BUG_ON(sg_is_chain(sg)); #endif return (struct page *)((sg)->page_link & ~0x3); @@ -116,9 +114,6 @@ static inline void sg_chain(struct scatterlist *prv, unsigned int prv_nents, **/ static inline void sg_mark_end(struct scatterlist *sg) { -#ifdef CONFIG_DEBUG_SG - BUG_ON(sg->sg_magic != SG_MAGIC); -#endif /* * Set termination bit, clear potential chain bit */ @@ -136,17 +131,11 @@ static inline void sg_mark_end(struct scatterlist *sg) **/ static inline void sg_unmark_end(struct scatterlist *sg) { -#ifdef CONFIG_DEBUG_SG - BUG_ON(sg->sg_magic != SG_MAGIC); -#endif sg->page_link &= ~0x02; } static inline struct scatterlist *sg_next(struct scatterlist *sg) { -#ifdef CONFIG_DEBUG_SG - BUG_ON(sg->sg_magic != SG_MAGIC); -#endif if (sg_is_last(sg)) return NULL; @@ -160,13 +149,6 @@ static inline struct scatterlist *sg_next(struct scatterlist *sg) static inline void sg_init_table(struct scatterlist *sgl, unsigned int nents) { memset(sgl, 0, sizeof(*sgl) * nents); -#ifdef CONFIG_DEBUG_SG - { - unsigned int i; - for (i = 0; i < nents; i++) - sgl[i].sg_magic = SG_MAGIC; - } -#endif sg_mark_end(&sgl[nents - 1]); } -- cgit v1.2.3 From 24b6c22504a27210a8377e54d24d425ae414f2c1 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Fri, 20 Apr 2018 23:13:44 +0200 Subject: parisc: Build kernel without -ffunction-sections As suggested by Nick Piggin it seems we can drop the -ffunction-sections compile flag, now that the kernel uses thin archives. Testing with 32- and 64-bit kernel showed no difference in kernel size. Suggested-by: Nicholas Piggin Signed-off-by: Helge Deller --- arch/parisc/Makefile | 4 ---- 1 file changed, 4 deletions(-) diff --git a/arch/parisc/Makefile b/arch/parisc/Makefile index 714284ea6cc2..5ce030266e7d 100644 --- a/arch/parisc/Makefile +++ b/arch/parisc/Makefile @@ -65,10 +65,6 @@ endif # kernel. cflags-y += -mdisable-fpregs -# Without this, "ld -r" results in .text sections that are too big -# (> 0x40000) for branches to reach stubs. -cflags-y += -ffunction-sections - # Use long jumps instead of long branches (needed if your linker fails to # link a too big vmlinux executable). Not enabled for building modules. ifdef CONFIG_MLONGCALLS -- cgit v1.2.3 From 18d405af30bf6506bf2fc49056de7691c949812e Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Thu, 28 Jun 2018 23:34:57 +0200 Subject: bpf, arm32: fix to use bpf_jit_binary_lock_ro api Any eBPF JIT that where its underlying arch supports ARCH_HAS_SET_MEMORY would need to use bpf_jit_binary_{un,}lock_ro() pair instead of the set_memory_{ro,rw}() pair directly as otherwise changes to the former might break. arm32's eBPF conversion missed to change it, so fix this up here. Fixes: 39c13c204bb1 ("arm: eBPF JIT compiler") Signed-off-by: Daniel Borkmann Acked-by: Alexei Starovoitov Signed-off-by: Alexei Starovoitov --- arch/arm/net/bpf_jit_32.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/net/bpf_jit_32.c b/arch/arm/net/bpf_jit_32.c index 6e8b71613039..f6a62ae44a65 100644 --- a/arch/arm/net/bpf_jit_32.c +++ b/arch/arm/net/bpf_jit_32.c @@ -1844,7 +1844,7 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog) /* there are 2 passes here */ bpf_jit_dump(prog->len, image_size, 2, ctx.target); - set_memory_ro((unsigned long)header, header->pages); + bpf_jit_binary_lock_ro(header); prog->bpf_func = (void *)ctx.target; prog->jited = 1; prog->jited_len = image_size; -- cgit v1.2.3 From f605ce5eb26ac934fb8106d75d46a2c875a2bf23 Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Thu, 28 Jun 2018 23:34:58 +0200 Subject: bpf, s390: fix potential memleak when later bpf_jit_prog fails If we would ever fail in the bpf_jit_prog() pass that writes the actual insns to the image after we got header via bpf_jit_binary_alloc() then we also need to make sure to free it through bpf_jit_binary_free() again when bailing out. Given we had prior bpf_jit_prog() passes to initially probe for clobbered registers, program size and to fill in addrs arrray for jump targets, this is more of a theoretical one, but at least make sure this doesn't break with future changes. Fixes: 054623105728 ("s390/bpf: Add s390x eBPF JIT compiler backend") Signed-off-by: Daniel Borkmann Cc: Martin Schwidefsky Acked-by: Alexei Starovoitov Signed-off-by: Alexei Starovoitov --- arch/s390/net/bpf_jit_comp.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/s390/net/bpf_jit_comp.c b/arch/s390/net/bpf_jit_comp.c index d2db8acb1a55..5f0234ec8038 100644 --- a/arch/s390/net/bpf_jit_comp.c +++ b/arch/s390/net/bpf_jit_comp.c @@ -1286,6 +1286,7 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *fp) goto free_addrs; } if (bpf_jit_prog(&jit, fp)) { + bpf_jit_binary_free(header); fp = orig_fp; goto free_addrs; } -- cgit v1.2.3 From 85782e037f8aba8922dadb24a1523ca0b82ab8bc Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Thu, 28 Jun 2018 23:34:59 +0200 Subject: bpf: undo prog rejection on read-only lock failure Partially undo commit 9facc336876f ("bpf: reject any prog that failed read-only lock") since it caused a regression, that is, syzkaller was able to manage to cause a panic via fault injection deep in set_memory_ro() path by letting an allocation fail: In x86's __change_page_attr_set_clr() it was able to change the attributes of the primary mapping but not in the alias mapping via cpa_process_alias(), so the second, inner call to the __change_page_attr() via __change_page_attr_set_clr() had to split a larger page and failed in the alloc_pages() with the artifically triggered allocation error which is then propagated down to the call site. Thus, for set_memory_ro() this means that it returned with an error, but from debugging a probe_kernel_write() revealed EFAULT on that memory since the primary mapping succeeded to get changed. Therefore the subsequent hdr->locked = 0 reset triggered the panic as it was performed on read-only memory, so call-site assumptions were infact wrong to assume that it would either succeed /or/ not succeed at all since there's no such rollback in set_memory_*() calls from partial change of mappings, in other words, we're left in a state that is "half done". A later undo via set_memory_rw() is succeeding though due to matching permissions on that part (aka due to the try_preserve_large_page() succeeding). While reproducing locally with explicitly triggering this error, the initial splitting only happens on rare occasions and in real world it would additionally need oom conditions, but that said, it could partially fail. Therefore, it is definitely wrong to bail out on set_memory_ro() error and reject the program with the set_memory_*() semantics we have today. Shouldn't have gone the extra mile since no other user in tree today infact checks for any set_memory_*() errors, e.g. neither module_enable_ro() / module_disable_ro() for module RO/NX handling which is mostly default these days nor kprobes core with alloc_insn_page() / free_insn_page() as examples that could be invoked long after bootup and original 314beb9bcabf ("x86: bpf_jit_comp: secure bpf jit against spraying attacks") did neither when it got first introduced to BPF so "improving" with bailing out was clearly not right when set_memory_*() cannot handle it today. Kees suggested that if set_memory_*() can fail, we should annotate it with __must_check, and all callers need to deal with it gracefully given those set_memory_*() markings aren't "advisory", but they're expected to actually do what they say. This might be an option worth to move forward in future but would at the same time require that set_memory_*() calls from supporting archs are guaranteed to be "atomic" in that they provide rollback if part of the range fails, once that happened, the transition from RW -> RO could be made more robust that way, while subsequent RO -> RW transition /must/ continue guaranteeing to always succeed the undo part. Reported-by: syzbot+a4eb8c7766952a1ca872@syzkaller.appspotmail.com Reported-by: syzbot+d866d1925855328eac3b@syzkaller.appspotmail.com Fixes: 9facc336876f ("bpf: reject any prog that failed read-only lock") Cc: Laura Abbott Cc: Kees Cook Signed-off-by: Daniel Borkmann Acked-by: Alexei Starovoitov Signed-off-by: Alexei Starovoitov --- include/linux/filter.h | 56 ++++++++------------------------------------------ kernel/bpf/core.c | 30 +-------------------------- 2 files changed, 9 insertions(+), 77 deletions(-) diff --git a/include/linux/filter.h b/include/linux/filter.h index 20f2659dd829..300baad62c88 100644 --- a/include/linux/filter.h +++ b/include/linux/filter.h @@ -470,9 +470,7 @@ struct sock_fprog_kern { }; struct bpf_binary_header { - u16 pages; - u16 locked:1; - + u32 pages; /* Some arches need word alignment for their instructions */ u8 image[] __aligned(4); }; @@ -481,7 +479,7 @@ struct bpf_prog { u16 pages; /* Number of allocated pages */ u16 jited:1, /* Is our filter JIT'ed? */ jit_requested:1,/* archs need to JIT the prog */ - locked:1, /* Program image locked? */ + undo_set_mem:1, /* Passed set_memory_ro() checkpoint */ gpl_compatible:1, /* Is filter GPL compatible? */ cb_access:1, /* Is control block accessed? */ dst_needed:1, /* Do we need dst entry? */ @@ -677,46 +675,24 @@ bpf_ctx_narrow_access_ok(u32 off, u32 size, u32 size_default) static inline void bpf_prog_lock_ro(struct bpf_prog *fp) { -#ifdef CONFIG_ARCH_HAS_SET_MEMORY - fp->locked = 1; - if (set_memory_ro((unsigned long)fp, fp->pages)) - fp->locked = 0; -#endif + fp->undo_set_mem = 1; + set_memory_ro((unsigned long)fp, fp->pages); } static inline void bpf_prog_unlock_ro(struct bpf_prog *fp) { -#ifdef CONFIG_ARCH_HAS_SET_MEMORY - if (fp->locked) { - WARN_ON_ONCE(set_memory_rw((unsigned long)fp, fp->pages)); - /* In case set_memory_rw() fails, we want to be the first - * to crash here instead of some random place later on. - */ - fp->locked = 0; - } -#endif + if (fp->undo_set_mem) + set_memory_rw((unsigned long)fp, fp->pages); } static inline void bpf_jit_binary_lock_ro(struct bpf_binary_header *hdr) { -#ifdef CONFIG_ARCH_HAS_SET_MEMORY - hdr->locked = 1; - if (set_memory_ro((unsigned long)hdr, hdr->pages)) - hdr->locked = 0; -#endif + set_memory_ro((unsigned long)hdr, hdr->pages); } static inline void bpf_jit_binary_unlock_ro(struct bpf_binary_header *hdr) { -#ifdef CONFIG_ARCH_HAS_SET_MEMORY - if (hdr->locked) { - WARN_ON_ONCE(set_memory_rw((unsigned long)hdr, hdr->pages)); - /* In case set_memory_rw() fails, we want to be the first - * to crash here instead of some random place later on. - */ - hdr->locked = 0; - } -#endif + set_memory_rw((unsigned long)hdr, hdr->pages); } static inline struct bpf_binary_header * @@ -728,22 +704,6 @@ bpf_jit_binary_hdr(const struct bpf_prog *fp) return (void *)addr; } -#ifdef CONFIG_ARCH_HAS_SET_MEMORY -static inline int bpf_prog_check_pages_ro_single(const struct bpf_prog *fp) -{ - if (!fp->locked) - return -ENOLCK; - if (fp->jited) { - const struct bpf_binary_header *hdr = bpf_jit_binary_hdr(fp); - - if (!hdr->locked) - return -ENOLCK; - } - - return 0; -} -#endif - int sk_filter_trim_cap(struct sock *sk, struct sk_buff *skb, unsigned int cap); static inline int sk_filter(struct sock *sk, struct sk_buff *skb) { diff --git a/kernel/bpf/core.c b/kernel/bpf/core.c index a9e6c04d0f4a..1e5625d46414 100644 --- a/kernel/bpf/core.c +++ b/kernel/bpf/core.c @@ -598,8 +598,6 @@ bpf_jit_binary_alloc(unsigned int proglen, u8 **image_ptr, bpf_fill_ill_insns(hdr, size); hdr->pages = size / PAGE_SIZE; - hdr->locked = 0; - hole = min_t(unsigned int, size - (proglen + sizeof(*hdr)), PAGE_SIZE - sizeof(*hdr)); start = (get_random_int() % hole) & ~(alignment - 1); @@ -1450,22 +1448,6 @@ static int bpf_check_tail_call(const struct bpf_prog *fp) return 0; } -static int bpf_prog_check_pages_ro_locked(const struct bpf_prog *fp) -{ -#ifdef CONFIG_ARCH_HAS_SET_MEMORY - int i, err; - - for (i = 0; i < fp->aux->func_cnt; i++) { - err = bpf_prog_check_pages_ro_single(fp->aux->func[i]); - if (err) - return err; - } - - return bpf_prog_check_pages_ro_single(fp); -#endif - return 0; -} - static void bpf_prog_select_func(struct bpf_prog *fp) { #ifndef CONFIG_BPF_JIT_ALWAYS_ON @@ -1524,17 +1506,7 @@ finalize: * all eBPF JITs might immediately support all features. */ *err = bpf_check_tail_call(fp); - if (*err) - return fp; - - /* Checkpoint: at this point onwards any cBPF -> eBPF or - * native eBPF program is read-only. If we failed to change - * the page attributes (e.g. allocation failure from - * splitting large pages), then reject the whole program - * in order to guarantee not ending up with any W+X pages - * from BPF side in kernel. - */ - *err = bpf_prog_check_pages_ro_locked(fp); + return fp; } EXPORT_SYMBOL_GPL(bpf_prog_select_runtime); -- cgit v1.2.3 From c860e997e9170a6d68f9d1e6e2cf61f572191aaf Mon Sep 17 00:00:00 2001 From: Yuchung Cheng Date: Wed, 27 Jun 2018 16:04:48 -0700 Subject: tcp: fix Fast Open key endianness Fast Open key could be stored in different endian based on the CPU. Previously hosts in different endianness in a server farm using the same key config (sysctl value) would produce different cookies. This patch fixes it by always storing it as little endian to keep same API for LE hosts. Reported-by: Daniele Iamartino Signed-off-by: Yuchung Cheng Signed-off-by: Eric Dumazet Signed-off-by: Neal Cardwell Signed-off-by: David S. Miller --- net/ipv4/sysctl_net_ipv4.c | 18 +++++++++++++----- 1 file changed, 13 insertions(+), 5 deletions(-) diff --git a/net/ipv4/sysctl_net_ipv4.c b/net/ipv4/sysctl_net_ipv4.c index d06247ba08b2..af0a857d8352 100644 --- a/net/ipv4/sysctl_net_ipv4.c +++ b/net/ipv4/sysctl_net_ipv4.c @@ -265,8 +265,9 @@ static int proc_tcp_fastopen_key(struct ctl_table *table, int write, ipv4.sysctl_tcp_fastopen); struct ctl_table tbl = { .maxlen = (TCP_FASTOPEN_KEY_LENGTH * 2 + 10) }; struct tcp_fastopen_context *ctxt; - int ret; u32 user_key[4]; /* 16 bytes, matching TCP_FASTOPEN_KEY_LENGTH */ + __le32 key[4]; + int ret, i; tbl.data = kmalloc(tbl.maxlen, GFP_KERNEL); if (!tbl.data) @@ -275,11 +276,14 @@ static int proc_tcp_fastopen_key(struct ctl_table *table, int write, rcu_read_lock(); ctxt = rcu_dereference(net->ipv4.tcp_fastopen_ctx); if (ctxt) - memcpy(user_key, ctxt->key, TCP_FASTOPEN_KEY_LENGTH); + memcpy(key, ctxt->key, TCP_FASTOPEN_KEY_LENGTH); else - memset(user_key, 0, sizeof(user_key)); + memset(key, 0, sizeof(key)); rcu_read_unlock(); + for (i = 0; i < ARRAY_SIZE(key); i++) + user_key[i] = le32_to_cpu(key[i]); + snprintf(tbl.data, tbl.maxlen, "%08x-%08x-%08x-%08x", user_key[0], user_key[1], user_key[2], user_key[3]); ret = proc_dostring(&tbl, write, buffer, lenp, ppos); @@ -290,13 +294,17 @@ static int proc_tcp_fastopen_key(struct ctl_table *table, int write, ret = -EINVAL; goto bad_key; } - tcp_fastopen_reset_cipher(net, NULL, user_key, + + for (i = 0; i < ARRAY_SIZE(user_key); i++) + key[i] = cpu_to_le32(user_key[i]); + + tcp_fastopen_reset_cipher(net, NULL, key, TCP_FASTOPEN_KEY_LENGTH); } bad_key: pr_debug("proc FO key set 0x%x-%x-%x-%x <- 0x%s: %u\n", - user_key[0], user_key[1], user_key[2], user_key[3], + user_key[0], user_key[1], user_key[2], user_key[3], (char *)tbl.data, ret); kfree(tbl.data); return ret; -- cgit v1.2.3 From 92291c95e71a7898109c1f95adfb48aa69e5ba7b Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 28 Jun 2018 12:24:42 +0300 Subject: atm: iphase: fix a 64 bit bug The code assumes that there is 4 bytes in a pointer and it doesn't allocate enough memory. Signed-off-by: Dan Carpenter Signed-off-by: David S. Miller --- drivers/atm/iphase.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/atm/iphase.c b/drivers/atm/iphase.c index ff81a576347e..82532c299bb5 100644 --- a/drivers/atm/iphase.c +++ b/drivers/atm/iphase.c @@ -1618,7 +1618,7 @@ static int rx_init(struct atm_dev *dev) skb_queue_head_init(&iadev->rx_dma_q); iadev->rx_free_desc_qhead = NULL; - iadev->rx_open = kcalloc(4, iadev->num_vc, GFP_KERNEL); + iadev->rx_open = kcalloc(iadev->num_vc, sizeof(void *), GFP_KERNEL); if (!iadev->rx_open) { printk(KERN_ERR DEV_LABEL "itf %d couldn't get free page\n", dev->number); -- cgit v1.2.3 From 5037c6280606396ab4d3065b066d4b574df020dc Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 28 Jun 2018 12:31:25 +0300 Subject: cnic: tidy up a size calculation Static checkers complain that id_tbl->table points to longs and 4 bytes is smaller than sizeof(long). But the since other side is dividing by 32 instead of sizeof(long), that means the current code works fine. Anyway, it's more conventional to use the BITS_TO_LONGS() macro when we're allocating a bitmap. Signed-off-by: Dan Carpenter Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/cnic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/broadcom/cnic.c b/drivers/net/ethernet/broadcom/cnic.c index 30273a7717e2..4fd829b5e65d 100644 --- a/drivers/net/ethernet/broadcom/cnic.c +++ b/drivers/net/ethernet/broadcom/cnic.c @@ -660,7 +660,7 @@ static int cnic_init_id_tbl(struct cnic_id_tbl *id_tbl, u32 size, u32 start_id, id_tbl->max = size; id_tbl->next = next; spin_lock_init(&id_tbl->lock); - id_tbl->table = kcalloc(DIV_ROUND_UP(size, 32), 4, GFP_KERNEL); + id_tbl->table = kcalloc(BITS_TO_LONGS(size), sizeof(long), GFP_KERNEL); if (!id_tbl->table) return -ENOMEM; -- cgit v1.2.3 From 484c016d9392786ce5c74017c206c706f29f823d Mon Sep 17 00:00:00 2001 From: Sudarsana Reddy Kalluru Date: Thu, 28 Jun 2018 04:52:15 -0700 Subject: bnx2x: Fix receiving tx-timeout in error or recovery state. Driver performs the internal reload when it receives tx-timeout event from the OS. Internal reload might fail in some scenarios e.g., fatal HW issues. In such cases OS still see the link, which would result in undesirable functionalities such as re-generation of tx-timeouts. The patch addresses this issue by indicating the link-down to OS when tx-timeout is detected, and keeping the link in down state till the internal reload is successful. Please consider applying it to 'net' branch. Signed-off-by: Sudarsana Reddy Kalluru Signed-off-by: Ariel Elior Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x.h | 1 + drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 6 ++++++ drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 6 ++++++ 3 files changed, 13 insertions(+) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h index d847e1b9c37b..be1506169076 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h @@ -1533,6 +1533,7 @@ struct bnx2x { struct link_vars link_vars; u32 link_cnt; struct bnx2x_link_report_data last_reported_link; + bool force_link_down; struct mdio_if_info mdio; diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c index 8cd73ff5debc..af7b5a4d8ba0 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c @@ -1261,6 +1261,11 @@ void __bnx2x_link_report(struct bnx2x *bp) { struct bnx2x_link_report_data cur_data; + if (bp->force_link_down) { + bp->link_vars.link_up = 0; + return; + } + /* reread mf_cfg */ if (IS_PF(bp) && !CHIP_IS_E1(bp)) bnx2x_read_mf_cfg(bp); @@ -2817,6 +2822,7 @@ int bnx2x_nic_load(struct bnx2x *bp, int load_mode) bp->pending_max = 0; } + bp->force_link_down = false; if (bp->port.pmf) { rc = bnx2x_initial_phy_init(bp, load_mode); if (rc) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index 5b1ed240bf18..57348f2b49a3 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -10279,6 +10279,12 @@ static void bnx2x_sp_rtnl_task(struct work_struct *work) bp->sp_rtnl_state = 0; smp_mb(); + /* Immediately indicate link as down */ + bp->link_vars.link_up = 0; + bp->force_link_down = true; + netif_carrier_off(bp->dev); + BNX2X_ERR("Indicating link is down due to Tx-timeout\n"); + bnx2x_nic_unload(bp, UNLOAD_NORMAL, true); /* When ret value shows failure of allocation failure, * the nic is rebooted again. If open still fails, a error -- cgit v1.2.3 From b95f6fbc8e15803a596ca5e5e21008fba29694c6 Mon Sep 17 00:00:00 2001 From: Madalin Bucur Date: Thu, 28 Jun 2018 15:26:50 +0300 Subject: fsl/fman: fix parser reporting bad checksum on short frames The FMan hardware parser needs to be configured to remove the short frame padding from the checksum calculation, otherwise short UDP and TCP frames are likely to be marked as having a bad checksum. Signed-off-by: Madalin Bucur Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/fman/fman_port.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/net/ethernet/freescale/fman/fman_port.c b/drivers/net/ethernet/freescale/fman/fman_port.c index ce6e24c74978..ecbf6187e13a 100644 --- a/drivers/net/ethernet/freescale/fman/fman_port.c +++ b/drivers/net/ethernet/freescale/fman/fman_port.c @@ -324,6 +324,10 @@ struct fman_port_qmi_regs { #define HWP_HXS_PHE_REPORT 0x00000800 #define HWP_HXS_PCAC_PSTAT 0x00000100 #define HWP_HXS_PCAC_PSTOP 0x00000001 +#define HWP_HXS_TCP_OFFSET 0xA +#define HWP_HXS_UDP_OFFSET 0xB +#define HWP_HXS_SH_PAD_REM 0x80000000 + struct fman_port_hwp_regs { struct { u32 ssa; /* Soft Sequence Attachment */ @@ -728,6 +732,10 @@ static void init_hwp(struct fman_port *port) iowrite32be(0xffffffff, ®s->pmda[i].lcv); } + /* Short packet padding removal from checksum calculation */ + iowrite32be(HWP_HXS_SH_PAD_REM, ®s->pmda[HWP_HXS_TCP_OFFSET].ssa); + iowrite32be(HWP_HXS_SH_PAD_REM, ®s->pmda[HWP_HXS_UDP_OFFSET].ssa); + start_port_hwp(port); } -- cgit v1.2.3 From 595e802e53f24642a145cf7f3e4ac9afab4c21ec Mon Sep 17 00:00:00 2001 From: Madalin Bucur Date: Thu, 28 Jun 2018 15:26:51 +0300 Subject: dpaa_eth: DPAA SGT needs to be 256B The DPAA HW requires that at least 256 bytes from the start of the first scatter-gather table entry are allocated and accessible. The hardware reads the maximum size the table can have in one access, thus requiring that the allocation and mapping to be done for the maximum size of 256B even if there is a smaller number of entries in the table. Signed-off-by: Madalin Bucur Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/dpaa/dpaa_eth.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c index 5f4e1ffa7b95..ab02057ac730 100644 --- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c +++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c @@ -125,6 +125,9 @@ MODULE_PARM_DESC(tx_timeout, "The Tx timeout in ms"); /* Default alignment for start of data in an Rx FD */ #define DPAA_FD_DATA_ALIGNMENT 16 +/* The DPAA requires 256 bytes reserved and mapped for the SGT */ +#define DPAA_SGT_SIZE 256 + /* Values for the L3R field of the FM Parse Results */ /* L3 Type field: First IP Present IPv4 */ @@ -1617,8 +1620,8 @@ static struct sk_buff *dpaa_cleanup_tx_fd(const struct dpaa_priv *priv, if (unlikely(qm_fd_get_format(fd) == qm_fd_sg)) { nr_frags = skb_shinfo(skb)->nr_frags; - dma_unmap_single(dev, addr, qm_fd_get_offset(fd) + - sizeof(struct qm_sg_entry) * (1 + nr_frags), + dma_unmap_single(dev, addr, + qm_fd_get_offset(fd) + DPAA_SGT_SIZE, dma_dir); /* The sgt buffer has been allocated with netdev_alloc_frag(), @@ -1903,8 +1906,7 @@ static int skb_to_sg_fd(struct dpaa_priv *priv, void *sgt_buf; /* get a page frag to store the SGTable */ - sz = SKB_DATA_ALIGN(priv->tx_headroom + - sizeof(struct qm_sg_entry) * (1 + nr_frags)); + sz = SKB_DATA_ALIGN(priv->tx_headroom + DPAA_SGT_SIZE); sgt_buf = netdev_alloc_frag(sz); if (unlikely(!sgt_buf)) { netdev_err(net_dev, "netdev_alloc_frag() failed for size %d\n", @@ -1972,9 +1974,8 @@ static int skb_to_sg_fd(struct dpaa_priv *priv, skbh = (struct sk_buff **)buffer_start; *skbh = skb; - addr = dma_map_single(dev, buffer_start, priv->tx_headroom + - sizeof(struct qm_sg_entry) * (1 + nr_frags), - dma_dir); + addr = dma_map_single(dev, buffer_start, + priv->tx_headroom + DPAA_SGT_SIZE, dma_dir); if (unlikely(dma_mapping_error(dev, addr))) { dev_err(dev, "DMA mapping failed"); err = -EINVAL; -- cgit v1.2.3 From d14b56f508ad70eca3e659545aab3c45200f258c Mon Sep 17 00:00:00 2001 From: Michal Hocko Date: Thu, 28 Jun 2018 17:53:06 +0200 Subject: net: cleanup gfp mask in alloc_skb_with_frags alloc_skb_with_frags uses __GFP_NORETRY for non-sleeping allocations which is just a noop and a little bit confusing. __GFP_NORETRY was added by ed98df3361f0 ("net: use __GFP_NORETRY for high order allocations") to prevent from the OOM killer. Yet this was not enough because fb05e7a89f50 ("net: don't wait for order-3 page allocation") didn't want an excessive reclaim for non-costly orders so it made it completely NOWAIT while it preserved __GFP_NORETRY in place which is now redundant. Drop the pointless __GFP_NORETRY because this function is used as copy&paste source for other places. Reviewed-by: Eric Dumazet Signed-off-by: Michal Hocko Signed-off-by: David S. Miller --- net/core/skbuff.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/net/core/skbuff.c b/net/core/skbuff.c index c642304f178c..eba8dae22c25 100644 --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -5276,8 +5276,7 @@ struct sk_buff *alloc_skb_with_frags(unsigned long header_len, if (npages >= 1 << order) { page = alloc_pages((gfp_mask & ~__GFP_DIRECT_RECLAIM) | __GFP_COMP | - __GFP_NOWARN | - __GFP_NORETRY, + __GFP_NOWARN, order); if (page) goto fill_page; -- cgit v1.2.3 From e7c7faa936680a2f0e78fc6d9683a5728421a150 Mon Sep 17 00:00:00 2001 From: David Ahern Date: Thu, 28 Jun 2018 13:36:55 -0700 Subject: net/ipv6: Fix updates to prefix route Sowmini reported that a recent commit broke prefix routes for linklocal addresses. The newly added modify_prefix_route is attempting to add a new prefix route when the ifp priority does not match the route metric however the check needs to account for the default priority. In addition, the route add fails because the route already exists, and then the delete removes the one that exists. Flip the order to do the delete first. Fixes: 8308f3ff1753 ("net/ipv6: Add support for specifying metric of connected routes") Reported-by: Sowmini Varadhan Tested-by: Sowmini Varadhan Signed-off-by: David Ahern Signed-off-by: David S. Miller --- net/ipv6/addrconf.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c index c134286d6a41..91580c62bb86 100644 --- a/net/ipv6/addrconf.c +++ b/net/ipv6/addrconf.c @@ -4528,6 +4528,7 @@ static int modify_prefix_route(struct inet6_ifaddr *ifp, unsigned long expires, u32 flags) { struct fib6_info *f6i; + u32 prio; f6i = addrconf_get_prefix_route(&ifp->addr, ifp->prefix_len, @@ -4536,13 +4537,15 @@ static int modify_prefix_route(struct inet6_ifaddr *ifp, if (!f6i) return -ENOENT; - if (f6i->fib6_metric != ifp->rt_priority) { + prio = ifp->rt_priority ? : IP6_RT_PRIO_ADDRCONF; + if (f6i->fib6_metric != prio) { + /* delete old one */ + ip6_del_rt(dev_net(ifp->idev->dev), f6i); + /* add new one */ addrconf_prefix_route(&ifp->addr, ifp->prefix_len, ifp->rt_priority, ifp->idev->dev, expires, flags, GFP_KERNEL); - /* delete old one */ - ip6_del_rt(dev_net(ifp->idev->dev), f6i); } else { if (!expires) fib6_clean_expires(f6i); -- cgit v1.2.3 From 713b4a33524721767703956654f4d6713c556f2b Mon Sep 17 00:00:00 2001 From: Dan Murphy Date: Fri, 29 Jun 2018 10:28:31 -0500 Subject: net: phy: DP83TC811: Fix disabling interrupts Fix a bug where INT_STAT1 was written twice and INT_STAT2 was ignored when disabling interrupts. Fixes: b753a9faaf9a ("net: phy: DP83TC811: Introduce support for the DP83TC811 phy") Reviewed-by: Andrew Lunn Signed-off-by: Dan Murphy Signed-off-by: David S. Miller --- drivers/net/phy/dp83tc811.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/phy/dp83tc811.c b/drivers/net/phy/dp83tc811.c index 081d99aa3985..49ac678eb2dc 100644 --- a/drivers/net/phy/dp83tc811.c +++ b/drivers/net/phy/dp83tc811.c @@ -222,7 +222,7 @@ static int dp83811_config_intr(struct phy_device *phydev) if (err < 0) return err; - err = phy_write(phydev, MII_DP83811_INT_STAT1, 0); + err = phy_write(phydev, MII_DP83811_INT_STAT2, 0); } return err; -- cgit v1.2.3 From cafb39600e7a73263122a0e2db052d691686378f Mon Sep 17 00:00:00 2001 From: Bert Kenward Date: Fri, 29 Jun 2018 16:29:28 +0100 Subject: sfc: correctly initialise filter rwsem for farch Fixes: fc7a6c287ff3 ("sfc: use a semaphore to lock farch filters too") Suggested-by: Joseph Korty Signed-off-by: Bert Kenward Signed-off-by: David S. Miller --- drivers/net/ethernet/sfc/farch.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/sfc/farch.c b/drivers/net/ethernet/sfc/farch.c index 8edf20967c82..e045a5d6b938 100644 --- a/drivers/net/ethernet/sfc/farch.c +++ b/drivers/net/ethernet/sfc/farch.c @@ -2794,6 +2794,7 @@ int efx_farch_filter_table_probe(struct efx_nic *efx) if (!state) return -ENOMEM; efx->filter_state = state; + init_rwsem(&state->lock); table = &state->table[EFX_FARCH_FILTER_TABLE_RX_IP]; table->id = EFX_FARCH_FILTER_TABLE_RX_IP; -- cgit v1.2.3 From bc800e8b39bad60ccdb83be828da63af71ab87b3 Mon Sep 17 00:00:00 2001 From: Sabrina Dubroca Date: Fri, 29 Jun 2018 17:51:26 +0200 Subject: alx: take rtnl before calling __alx_open from resume The __alx_open function can be called from ndo_open, which is called under RTNL, or from alx_resume, which isn't. Since commit d768319cd427, we're calling the netif_set_real_num_{tx,rx}_queues functions, which need to be called under RTNL. This is similar to commit 0c2cc02e571a ("igb: Move the calls to set the Tx and Rx queues into igb_open"). Fixes: d768319cd427 ("alx: enable multiple tx queues") Signed-off-by: Sabrina Dubroca Signed-off-by: David S. Miller --- drivers/net/ethernet/atheros/alx/main.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/atheros/alx/main.c b/drivers/net/ethernet/atheros/alx/main.c index 567ee54504bc..5e5022fa1d04 100644 --- a/drivers/net/ethernet/atheros/alx/main.c +++ b/drivers/net/ethernet/atheros/alx/main.c @@ -1897,13 +1897,19 @@ static int alx_resume(struct device *dev) struct pci_dev *pdev = to_pci_dev(dev); struct alx_priv *alx = pci_get_drvdata(pdev); struct alx_hw *hw = &alx->hw; + int err; alx_reset_phy(hw); if (!netif_running(alx->dev)) return 0; netif_device_attach(alx->dev); - return __alx_open(alx, true); + + rtnl_lock(); + err = __alx_open(alx, true); + rtnl_unlock(); + + return err; } static SIMPLE_DEV_PM_OPS(alx_pm_ops, alx_suspend, alx_resume); -- cgit v1.2.3 From 4664610537d398d55be19432f9cd9c29c831e159 Mon Sep 17 00:00:00 2001 From: Julian Wiedmann Date: Fri, 29 Jun 2018 19:45:50 +0200 Subject: Revert "s390/qeth: use Read device to query hypervisor for MAC" This reverts commit b7493e91c11a757cf0f8ab26989642ee4bb2c642. On its own, querying RDEV for a MAC address works fine. But when upgrading from a qeth that previously queried DDEV on a z/VM NIC (ie. any kernel with commit ec61bd2fd2a2), the RDEV query now returns a _different_ MAC address than the DDEV query. If the NIC is configured with MACPROTECT, z/VM apparently requires us to use the MAC that was initially returned (on DDEV) and registered. So after upgrading to a kernel that uses RDEV, the SETVMAC registration cmd for the new MAC address fails and we end up with a non-operabel interface. To avoid regressions on upgrade, switch back to using DDEV for the MAC address query. The downgrade path (first RDEV, later DDEV) is fine, in this case both queries return the same MAC address. Fixes: b7493e91c11a ("s390/qeth: use Read device to query hypervisor for MAC") Reported-by: Michal Kubecek Tested-by: Karsten Graul Signed-off-by: Julian Wiedmann Signed-off-by: David S. Miller --- drivers/s390/net/qeth_core_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c index 8e1474f1ffac..9d9182ed8ac4 100644 --- a/drivers/s390/net/qeth_core_main.c +++ b/drivers/s390/net/qeth_core_main.c @@ -4834,7 +4834,7 @@ int qeth_vm_request_mac(struct qeth_card *card) goto out; } - ccw_device_get_id(CARD_RDEV(card), &id); + ccw_device_get_id(CARD_DDEV(card), &id); request->resp_buf_len = sizeof(*response); request->resp_version = DIAG26C_VERSION2; request->op_code = DIAG26C_GET_MAC; -- cgit v1.2.3 From 4789a21880488048105590049fc41a99f53d565d Mon Sep 17 00:00:00 2001 From: Julian Wiedmann Date: Fri, 29 Jun 2018 19:45:51 +0200 Subject: s390/qeth: fix race when setting MAC address When qeth_l2_set_mac_address() finds the card in a non-reachable state, it merely copies the new MAC address into dev->dev_addr so that __qeth_l2_set_online() can later register it with the HW. But __qeth_l2_set_online() may very well be running concurrently, so we can't trust the card state without appropriate locking: If the online sequence is past the point where it registers dev->dev_addr (but not yet in SOFTSETUP state), any address change needs to be properly programmed into the HW. Otherwise the netdevice ends up with a different MAC address than what's set in the HW, and inbound traffic is not forwarded as expected. This is most likely to occur for OSD in LPAR, where commit 21b1702af12e ("s390/qeth: improve fallback to random MAC address") now triggers eg. systemd to immediately change the MAC when the netdevice is registered with a NET_ADDR_RANDOM address. Fixes: bcacfcbc82b4 ("s390/qeth: fix MAC address update sequence") Signed-off-by: Julian Wiedmann Signed-off-by: David S. Miller --- drivers/s390/net/qeth_l2_main.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-) diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c index a7cb37da6a21..7daf125dae76 100644 --- a/drivers/s390/net/qeth_l2_main.c +++ b/drivers/s390/net/qeth_l2_main.c @@ -501,27 +501,34 @@ static int qeth_l2_set_mac_address(struct net_device *dev, void *p) return -ERESTARTSYS; } + /* avoid racing against concurrent state change: */ + if (!mutex_trylock(&card->conf_mutex)) + return -EAGAIN; + if (!qeth_card_hw_is_reachable(card)) { ether_addr_copy(dev->dev_addr, addr->sa_data); - return 0; + goto out_unlock; } /* don't register the same address twice */ if (ether_addr_equal_64bits(dev->dev_addr, addr->sa_data) && (card->info.mac_bits & QETH_LAYER2_MAC_REGISTERED)) - return 0; + goto out_unlock; /* add the new address, switch over, drop the old */ rc = qeth_l2_send_setmac(card, addr->sa_data); if (rc) - return rc; + goto out_unlock; ether_addr_copy(old_addr, dev->dev_addr); ether_addr_copy(dev->dev_addr, addr->sa_data); if (card->info.mac_bits & QETH_LAYER2_MAC_REGISTERED) qeth_l2_remove_mac(card, old_addr); card->info.mac_bits |= QETH_LAYER2_MAC_REGISTERED; - return 0; + +out_unlock: + mutex_unlock(&card->conf_mutex); + return rc; } static void qeth_promisc_to_bridge(struct qeth_card *card) -- cgit v1.2.3 From 9d0a58fb9747afd27d490c02a97889a1b59f6be4 Mon Sep 17 00:00:00 2001 From: Vasily Gorbik Date: Fri, 29 Jun 2018 19:45:52 +0200 Subject: s390/qeth: avoid using is_multicast_ether_addr_64bits on (u8 *)[6] *ether_addr*_64bits functions have been introduced to optimize performance critical paths, which access 6-byte ethernet address as u64 value to get "nice" assembly. A harmless hack works nicely on ethernet addresses shoved into a structure or a larger buffer, until busted by Kasan on smth like plain (u8 *)[6]. qeth_l2_set_mac_address calls qeth_l2_remove_mac passing u8 old_addr[ETH_ALEN] as an argument. Adding/removing macs for an ethernet adapter is not that performance critical. Moreover is_multicast_ether_addr_64bits itself on s390 is not faster than is_multicast_ether_addr: is_multicast_ether_addr(%r2) -> %r2 llc %r2,0(%r2) risbg %r2,%r2,63,191,0 is_multicast_ether_addr_64bits(%r2) -> %r2 llgc %r2,0(%r2) risbg %r2,%r2,63,191,0 So, let's just use is_multicast_ether_addr instead of is_multicast_ether_addr_64bits. Fixes: bcacfcbc82b4 ("s390/qeth: fix MAC address update sequence") Reviewed-by: Julian Wiedmann Signed-off-by: Vasily Gorbik Signed-off-by: Julian Wiedmann Signed-off-by: David S. Miller --- drivers/s390/net/qeth_l2_main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c index 7daf125dae76..5464515b71f1 100644 --- a/drivers/s390/net/qeth_l2_main.c +++ b/drivers/s390/net/qeth_l2_main.c @@ -140,7 +140,7 @@ static int qeth_l2_send_setmac(struct qeth_card *card, __u8 *mac) static int qeth_l2_write_mac(struct qeth_card *card, u8 *mac) { - enum qeth_ipa_cmds cmd = is_multicast_ether_addr_64bits(mac) ? + enum qeth_ipa_cmds cmd = is_multicast_ether_addr(mac) ? IPA_CMD_SETGMAC : IPA_CMD_SETVMAC; int rc; @@ -157,7 +157,7 @@ static int qeth_l2_write_mac(struct qeth_card *card, u8 *mac) static int qeth_l2_remove_mac(struct qeth_card *card, u8 *mac) { - enum qeth_ipa_cmds cmd = is_multicast_ether_addr_64bits(mac) ? + enum qeth_ipa_cmds cmd = is_multicast_ether_addr(mac) ? IPA_CMD_DELGMAC : IPA_CMD_DELVMAC; int rc; -- cgit v1.2.3 From ce28867fd20c23cd769e78b4d619c4755bf71a1c Mon Sep 17 00:00:00 2001 From: Julian Wiedmann Date: Fri, 29 Jun 2018 19:45:53 +0200 Subject: s390/qeth: don't clobber buffer on async TX completion If qeth_qdio_output_handler() detects that a transmit requires async completion, it replaces the pending buffer's metadata object (qeth_qdio_out_buffer) so that this queue buffer can be re-used while the data is pending completion. Later when the CQ indicates async completion of such a metadata object, qeth_qdio_cq_handler() tries to free any data associated with this object (since HW has now completed the transfer). By calling qeth_clear_output_buffer(), it erronously operates on the queue buffer that _previously_ belonged to this transfer ... but which has been potentially re-used several times by now. This results in double-free's of the buffer's data, and failing transmits as the buffer descriptor is scrubbed in mid-air. The correct way of handling this situation is to 1. scrub the queue buffer when it is prepared for re-use, and 2. later obtain the data addresses from the async-completion notifier (ie. the AOB), instead of the queue buffer. All this only affects qeth devices used for af_iucv HiperTransport. Fixes: 0da9581ddb0f ("qeth: exploit asynchronous delivery of storage blocks") Signed-off-by: Julian Wiedmann Signed-off-by: David S. Miller --- drivers/s390/net/qeth_core.h | 11 +++++++++++ drivers/s390/net/qeth_core_main.c | 22 ++++++++++++++++------ 2 files changed, 27 insertions(+), 6 deletions(-) diff --git a/drivers/s390/net/qeth_core.h b/drivers/s390/net/qeth_core.h index 2a5fec55bf60..940fd7b558d3 100644 --- a/drivers/s390/net/qeth_core.h +++ b/drivers/s390/net/qeth_core.h @@ -829,6 +829,17 @@ struct qeth_trap_id { /*some helper functions*/ #define QETH_CARD_IFNAME(card) (((card)->dev)? (card)->dev->name : "") +static inline void qeth_scrub_qdio_buffer(struct qdio_buffer *buf, + unsigned int elements) +{ + unsigned int i; + + for (i = 0; i < elements; i++) + memset(&buf->element[i], 0, sizeof(struct qdio_buffer_element)); + buf->element[14].sflags = 0; + buf->element[15].sflags = 0; +} + /** * qeth_get_elements_for_range() - find number of SBALEs to cover range. * @start: Start of the address range. diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c index 9d9182ed8ac4..d20a69a3bc40 100644 --- a/drivers/s390/net/qeth_core_main.c +++ b/drivers/s390/net/qeth_core_main.c @@ -73,9 +73,6 @@ static void qeth_notify_skbs(struct qeth_qdio_out_q *queue, struct qeth_qdio_out_buffer *buf, enum iucv_tx_notify notification); static void qeth_release_skbs(struct qeth_qdio_out_buffer *buf); -static void qeth_clear_output_buffer(struct qeth_qdio_out_q *queue, - struct qeth_qdio_out_buffer *buf, - enum qeth_qdio_buffer_states newbufstate); static int qeth_init_qdio_out_buf(struct qeth_qdio_out_q *, int); struct workqueue_struct *qeth_wq; @@ -489,6 +486,7 @@ static void qeth_qdio_handle_aob(struct qeth_card *card, struct qaob *aob; struct qeth_qdio_out_buffer *buffer; enum iucv_tx_notify notification; + unsigned int i; aob = (struct qaob *) phys_to_virt(phys_aob_addr); QETH_CARD_TEXT(card, 5, "haob"); @@ -513,10 +511,18 @@ static void qeth_qdio_handle_aob(struct qeth_card *card, qeth_notify_skbs(buffer->q, buffer, notification); buffer->aob = NULL; - qeth_clear_output_buffer(buffer->q, buffer, - QETH_QDIO_BUF_HANDLED_DELAYED); + /* Free dangling allocations. The attached skbs are handled by + * qeth_cleanup_handled_pending(). + */ + for (i = 0; + i < aob->sb_count && i < QETH_MAX_BUFFER_ELEMENTS(card); + i++) { + if (aob->sba[i] && buffer->is_header[i]) + kmem_cache_free(qeth_core_header_cache, + (void *) aob->sba[i]); + } + atomic_set(&buffer->state, QETH_QDIO_BUF_HANDLED_DELAYED); - /* from here on: do not touch buffer anymore */ qdio_release_aob(aob); } @@ -3759,6 +3765,10 @@ static void qeth_qdio_output_handler(struct ccw_device *ccwdev, QETH_CARD_TEXT(queue->card, 5, "aob"); QETH_CARD_TEXT_(queue->card, 5, "%lx", virt_to_phys(buffer->aob)); + + /* prepare the queue slot for re-use: */ + qeth_scrub_qdio_buffer(buffer->buffer, + QETH_MAX_BUFFER_ELEMENTS(card)); if (qeth_init_qdio_out_buf(queue, bidx)) { QETH_CARD_TEXT(card, 2, "outofbuf"); qeth_schedule_recovery(card); -- cgit v1.2.3 From d025da9eb1e48d3e5f2a2ff13ac5ac536ba4be43 Mon Sep 17 00:00:00 2001 From: Julian Wiedmann Date: Fri, 29 Jun 2018 19:45:54 +0200 Subject: s390/qeth: consistently re-enable device features commit e830baa9c3f0 ("qeth: restore device features after recovery") and commit ce3443564145 ("s390/qeth: rely on kernel for feature recovery") made sure that the HW functions for device features get re-programmed after recovery. But we missed that the same handling is also required when a card is first set offline (destroying all HW context), and then online again. Fix this by moving the re-enable action out of the recovery-only path. Signed-off-by: Julian Wiedmann Signed-off-by: David S. Miller --- drivers/s390/net/qeth_core.h | 2 +- drivers/s390/net/qeth_core_main.c | 23 +++++++++++------------ drivers/s390/net/qeth_l2_main.c | 5 ++--- drivers/s390/net/qeth_l3_main.c | 3 ++- 4 files changed, 16 insertions(+), 17 deletions(-) diff --git a/drivers/s390/net/qeth_core.h b/drivers/s390/net/qeth_core.h index 940fd7b558d3..a246a618f9a4 100644 --- a/drivers/s390/net/qeth_core.h +++ b/drivers/s390/net/qeth_core.h @@ -1040,7 +1040,7 @@ struct qeth_cmd_buffer *qeth_get_setassparms_cmd(struct qeth_card *, __u16, __u16, enum qeth_prot_versions); int qeth_set_features(struct net_device *, netdev_features_t); -void qeth_recover_features(struct net_device *dev); +void qeth_enable_hw_features(struct net_device *dev); netdev_features_t qeth_fix_features(struct net_device *, netdev_features_t); netdev_features_t qeth_features_check(struct sk_buff *skb, struct net_device *dev, diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c index d20a69a3bc40..d01ac29fd986 100644 --- a/drivers/s390/net/qeth_core_main.c +++ b/drivers/s390/net/qeth_core_main.c @@ -6469,28 +6469,27 @@ static int qeth_set_ipa_rx_csum(struct qeth_card *card, bool on) #define QETH_HW_FEATURES (NETIF_F_RXCSUM | NETIF_F_IP_CSUM | NETIF_F_TSO | \ NETIF_F_IPV6_CSUM) /** - * qeth_recover_features() - Restore device features after recovery - * @dev: the recovering net_device - * - * Caller must hold rtnl lock. + * qeth_enable_hw_features() - (Re-)Enable HW functions for device features + * @dev: a net_device */ -void qeth_recover_features(struct net_device *dev) +void qeth_enable_hw_features(struct net_device *dev) { - netdev_features_t features = dev->features; struct qeth_card *card = dev->ml_priv; + netdev_features_t features; + rtnl_lock(); + features = dev->features; /* force-off any feature that needs an IPA sequence. * netdev_update_features() will restart them. */ dev->features &= ~QETH_HW_FEATURES; netdev_update_features(dev); - - if (features == dev->features) - return; - dev_warn(&card->gdev->dev, - "Device recovery failed to restore all offload features\n"); + if (features != dev->features) + dev_warn(&card->gdev->dev, + "Device recovery failed to restore all offload features\n"); + rtnl_unlock(); } -EXPORT_SYMBOL_GPL(qeth_recover_features); +EXPORT_SYMBOL_GPL(qeth_enable_hw_features); int qeth_set_features(struct net_device *dev, netdev_features_t features) { diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c index 5464515b71f1..2487f0aeb165 100644 --- a/drivers/s390/net/qeth_l2_main.c +++ b/drivers/s390/net/qeth_l2_main.c @@ -1119,6 +1119,8 @@ static int __qeth_l2_set_online(struct ccwgroup_device *gdev, int recovery_mode) netif_carrier_off(card->dev); qeth_set_allowed_threads(card, 0xffffffff, 0); + + qeth_enable_hw_features(card->dev); if (recover_flag == CARD_STATE_RECOVER) { if (recovery_mode && card->info.type != QETH_CARD_TYPE_OSN) { @@ -1130,9 +1132,6 @@ static int __qeth_l2_set_online(struct ccwgroup_device *gdev, int recovery_mode) } /* this also sets saved unicast addresses */ qeth_l2_set_rx_mode(card->dev); - rtnl_lock(); - qeth_recover_features(card->dev); - rtnl_unlock(); } /* let user_space know that device is online */ kobject_uevent(&gdev->dev.kobj, KOBJ_CHANGE); diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c index e7fa479adf47..5905dc63e256 100644 --- a/drivers/s390/net/qeth_l3_main.c +++ b/drivers/s390/net/qeth_l3_main.c @@ -2662,6 +2662,8 @@ static int __qeth_l3_set_online(struct ccwgroup_device *gdev, int recovery_mode) netif_carrier_on(card->dev); else netif_carrier_off(card->dev); + + qeth_enable_hw_features(card->dev); if (recover_flag == CARD_STATE_RECOVER) { rtnl_lock(); if (recovery_mode) @@ -2669,7 +2671,6 @@ static int __qeth_l3_set_online(struct ccwgroup_device *gdev, int recovery_mode) else dev_open(card->dev); qeth_l3_set_rx_mode(card->dev); - qeth_recover_features(card->dev); rtnl_unlock(); } qeth_trace_features(card); -- cgit v1.2.3 From ced9e191501e52b95e1b57b8e0db00943869eed0 Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Fri, 29 Jun 2018 13:28:07 -0500 Subject: atm: zatm: Fix potential Spectre v1 pool can be indirectly controlled by user-space, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. This issue was detected with the help of Smatch: drivers/atm/zatm.c:1491 zatm_ioctl() warn: potential spectre issue 'zatm_dev->pool_info' (local cap) Fix this by sanitizing pool before using it to index zatm_dev->pool_info Notice that given that speculation windows are large, the policy is to kill the speculation on the first load and not worry if it can be completed with a dependent load/store [1]. [1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2 Signed-off-by: Gustavo A. R. Silva Signed-off-by: David S. Miller --- drivers/atm/zatm.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/atm/zatm.c b/drivers/atm/zatm.c index a8d2eb0ceb8d..2c288d1f42bb 100644 --- a/drivers/atm/zatm.c +++ b/drivers/atm/zatm.c @@ -1483,6 +1483,8 @@ static int zatm_ioctl(struct atm_dev *dev,unsigned int cmd,void __user *arg) return -EFAULT; if (pool < 0 || pool > ZATM_LAST_POOL) return -EINVAL; + pool = array_index_nospec(pool, + ZATM_LAST_POOL + 1); if (copy_from_user(&info, &((struct zatm_pool_req __user *) arg)->info, sizeof(info))) return -EFAULT; -- cgit v1.2.3 From 3f76df198288ceec92fc9eddecad1e73c52769b0 Mon Sep 17 00:00:00 2001 From: Cong Wang Date: Fri, 29 Jun 2018 13:42:48 -0700 Subject: net: use dev_change_tx_queue_len() for SIOCSIFTXQLEN As noticed by Eric, we need to switch to the helper dev_change_tx_queue_len() for SIOCSIFTXQLEN call path too, otheriwse still miss dev_qdisc_change_tx_queue_len(). Fixes: 6a643ddb5624 ("net: introduce helper dev_change_tx_queue_len()") Reported-by: Eric Dumazet Signed-off-by: Cong Wang Reviewed-by: Eric Dumazet Signed-off-by: David S. Miller --- net/core/dev_ioctl.c | 11 ++--------- 1 file changed, 2 insertions(+), 9 deletions(-) diff --git a/net/core/dev_ioctl.c b/net/core/dev_ioctl.c index a04e1e88bf3a..50537ff961a7 100644 --- a/net/core/dev_ioctl.c +++ b/net/core/dev_ioctl.c @@ -285,16 +285,9 @@ static int dev_ifsioc(struct net *net, struct ifreq *ifr, unsigned int cmd) if (ifr->ifr_qlen < 0) return -EINVAL; if (dev->tx_queue_len ^ ifr->ifr_qlen) { - unsigned int orig_len = dev->tx_queue_len; - - dev->tx_queue_len = ifr->ifr_qlen; - err = call_netdevice_notifiers( - NETDEV_CHANGE_TX_QUEUE_LEN, dev); - err = notifier_to_errno(err); - if (err) { - dev->tx_queue_len = orig_len; + err = dev_change_tx_queue_len(dev, ifr->ifr_qlen); + if (err) return err; - } } return 0; -- cgit v1.2.3 From 3ffe64f1a641b80a82d9ef4efa7a05ce69049871 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Fri, 29 Jun 2018 14:07:16 -0700 Subject: hv_netvsc: split sub-channel setup into async and sync When doing device hotplug the sub channel must be async to avoid deadlock issues because device is discovered in softirq context. When doing changes to MTU and number of channels, the setup must be synchronous to avoid races such as when MTU and device settings are done in a single ip command. Reported-by: Thomas Walker Fixes: 8195b1396ec8 ("hv_netvsc: fix deadlock on hotplug") Fixes: 732e49850c5e ("netvsc: fix race on sub channel creation") Signed-off-by: Stephen Hemminger Signed-off-by: Haiyang Zhang Signed-off-by: David S. Miller --- drivers/net/hyperv/hyperv_net.h | 2 +- drivers/net/hyperv/netvsc.c | 37 +++++++++++++++++++++++- drivers/net/hyperv/netvsc_drv.c | 17 ++++++++++- drivers/net/hyperv/rndis_filter.c | 61 ++++++++------------------------------- 4 files changed, 65 insertions(+), 52 deletions(-) diff --git a/drivers/net/hyperv/hyperv_net.h b/drivers/net/hyperv/hyperv_net.h index 1a924b867b07..4b6e308199d2 100644 --- a/drivers/net/hyperv/hyperv_net.h +++ b/drivers/net/hyperv/hyperv_net.h @@ -210,7 +210,7 @@ int netvsc_recv_callback(struct net_device *net, void netvsc_channel_cb(void *context); int netvsc_poll(struct napi_struct *napi, int budget); -void rndis_set_subchannel(struct work_struct *w); +int rndis_set_subchannel(struct net_device *ndev, struct netvsc_device *nvdev); int rndis_filter_open(struct netvsc_device *nvdev); int rndis_filter_close(struct netvsc_device *nvdev); struct netvsc_device *rndis_filter_device_add(struct hv_device *dev, diff --git a/drivers/net/hyperv/netvsc.c b/drivers/net/hyperv/netvsc.c index 5d5bd513847f..8e9d0ee1572b 100644 --- a/drivers/net/hyperv/netvsc.c +++ b/drivers/net/hyperv/netvsc.c @@ -65,6 +65,41 @@ void netvsc_switch_datapath(struct net_device *ndev, bool vf) VM_PKT_DATA_INBAND, 0); } +/* Worker to setup sub channels on initial setup + * Initial hotplug event occurs in softirq context + * and can't wait for channels. + */ +static void netvsc_subchan_work(struct work_struct *w) +{ + struct netvsc_device *nvdev = + container_of(w, struct netvsc_device, subchan_work); + struct rndis_device *rdev; + int i, ret; + + /* Avoid deadlock with device removal already under RTNL */ + if (!rtnl_trylock()) { + schedule_work(w); + return; + } + + rdev = nvdev->extension; + if (rdev) { + ret = rndis_set_subchannel(rdev->ndev, nvdev); + if (ret == 0) { + netif_device_attach(rdev->ndev); + } else { + /* fallback to only primary channel */ + for (i = 1; i < nvdev->num_chn; i++) + netif_napi_del(&nvdev->chan_table[i].napi); + + nvdev->max_chn = 1; + nvdev->num_chn = 1; + } + } + + rtnl_unlock(); +} + static struct netvsc_device *alloc_net_device(void) { struct netvsc_device *net_device; @@ -81,7 +116,7 @@ static struct netvsc_device *alloc_net_device(void) init_completion(&net_device->channel_init_wait); init_waitqueue_head(&net_device->subchan_open); - INIT_WORK(&net_device->subchan_work, rndis_set_subchannel); + INIT_WORK(&net_device->subchan_work, netvsc_subchan_work); return net_device; } diff --git a/drivers/net/hyperv/netvsc_drv.c b/drivers/net/hyperv/netvsc_drv.c index fe2256bf1d13..dd1d6e115145 100644 --- a/drivers/net/hyperv/netvsc_drv.c +++ b/drivers/net/hyperv/netvsc_drv.c @@ -905,8 +905,20 @@ static int netvsc_attach(struct net_device *ndev, if (IS_ERR(nvdev)) return PTR_ERR(nvdev); - /* Note: enable and attach happen when sub-channels setup */ + if (nvdev->num_chn > 1) { + ret = rndis_set_subchannel(ndev, nvdev); + + /* if unavailable, just proceed with one queue */ + if (ret) { + nvdev->max_chn = 1; + nvdev->num_chn = 1; + } + } + + /* In any case device is now ready */ + netif_device_attach(ndev); + /* Note: enable and attach happen when sub-channels setup */ netif_carrier_off(ndev); if (netif_running(ndev)) { @@ -2089,6 +2101,9 @@ static int netvsc_probe(struct hv_device *dev, memcpy(net->dev_addr, device_info.mac_adr, ETH_ALEN); + if (nvdev->num_chn > 1) + schedule_work(&nvdev->subchan_work); + /* hw_features computed in rndis_netdev_set_hwcaps() */ net->features = net->hw_features | NETIF_F_HIGHDMA | NETIF_F_SG | diff --git a/drivers/net/hyperv/rndis_filter.c b/drivers/net/hyperv/rndis_filter.c index 5428bb261102..9b4e3c3787e5 100644 --- a/drivers/net/hyperv/rndis_filter.c +++ b/drivers/net/hyperv/rndis_filter.c @@ -1062,29 +1062,15 @@ static void netvsc_sc_open(struct vmbus_channel *new_sc) * This breaks overlap of processing the host message for the * new primary channel with the initialization of sub-channels. */ -void rndis_set_subchannel(struct work_struct *w) +int rndis_set_subchannel(struct net_device *ndev, struct netvsc_device *nvdev) { - struct netvsc_device *nvdev - = container_of(w, struct netvsc_device, subchan_work); struct nvsp_message *init_packet = &nvdev->channel_init_pkt; - struct net_device_context *ndev_ctx; - struct rndis_device *rdev; - struct net_device *ndev; - struct hv_device *hv_dev; + struct net_device_context *ndev_ctx = netdev_priv(ndev); + struct hv_device *hv_dev = ndev_ctx->device_ctx; + struct rndis_device *rdev = nvdev->extension; int i, ret; - if (!rtnl_trylock()) { - schedule_work(w); - return; - } - - rdev = nvdev->extension; - if (!rdev) - goto unlock; /* device was removed */ - - ndev = rdev->ndev; - ndev_ctx = netdev_priv(ndev); - hv_dev = ndev_ctx->device_ctx; + ASSERT_RTNL(); memset(init_packet, 0, sizeof(struct nvsp_message)); init_packet->hdr.msg_type = NVSP_MSG5_TYPE_SUBCHANNEL; @@ -1100,13 +1086,13 @@ void rndis_set_subchannel(struct work_struct *w) VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED); if (ret) { netdev_err(ndev, "sub channel allocate send failed: %d\n", ret); - goto failed; + return ret; } wait_for_completion(&nvdev->channel_init_wait); if (init_packet->msg.v5_msg.subchn_comp.status != NVSP_STAT_SUCCESS) { netdev_err(ndev, "sub channel request failed\n"); - goto failed; + return -EIO; } nvdev->num_chn = 1 + @@ -1125,21 +1111,7 @@ void rndis_set_subchannel(struct work_struct *w) for (i = 0; i < VRSS_SEND_TAB_SIZE; i++) ndev_ctx->tx_table[i] = i % nvdev->num_chn; - netif_device_attach(ndev); - rtnl_unlock(); - return; - -failed: - /* fallback to only primary channel */ - for (i = 1; i < nvdev->num_chn; i++) - netif_napi_del(&nvdev->chan_table[i].napi); - - nvdev->max_chn = 1; - nvdev->num_chn = 1; - - netif_device_attach(ndev); -unlock: - rtnl_unlock(); + return 0; } static int rndis_netdev_set_hwcaps(struct rndis_device *rndis_device, @@ -1360,21 +1332,12 @@ struct netvsc_device *rndis_filter_device_add(struct hv_device *dev, netif_napi_add(net, &net_device->chan_table[i].napi, netvsc_poll, NAPI_POLL_WEIGHT); - if (net_device->num_chn > 1) - schedule_work(&net_device->subchan_work); + return net_device; out: - /* if unavailable, just proceed with one queue */ - if (ret) { - net_device->max_chn = 1; - net_device->num_chn = 1; - } - - /* No sub channels, device is ready */ - if (net_device->num_chn == 1) - netif_device_attach(net); - - return net_device; + /* setting up multiple channels failed */ + net_device->max_chn = 1; + net_device->num_chn = 1; err_dev_remv: rndis_filter_device_remove(dev, net_device); -- cgit v1.2.3 From 35e8c7ba0863acadd4b9badd09740af7a8331125 Mon Sep 17 00:00:00 2001 From: Roopa Prabhu Date: Fri, 29 Jun 2018 14:32:15 -0700 Subject: net: fib_rules: bring back rule_exists to match rule during add After commit f9d4b0c1e969 ("fib_rules: move common handling of newrule delrule msgs into fib_nl2rule"), rule_exists got replaced by rule_find for existing rule lookup in both the add and del paths. While this is good for the delete path, it solves a few problems but opens up a few invalid key matches in the add path. $ip -4 rule add table main tos 10 fwmark 1 $ip -4 rule add table main tos 10 RTNETLINK answers: File exists The problem here is rule_find does not check if the key masks in the new and old rule are the same and hence ends up matching a more secific rule. Rule key masks cannot be easily compared today without an elaborate if-else block. Its best to introduce key masks for easier and accurate rule comparison in the future. Until then, due to fear of regressions this patch re-introduces older loose rule_exists during add. Also fixes both rule_exists and rule_find to cover missing attributes. Fixes: f9d4b0c1e969 ("fib_rules: move common handling of newrule delrule msgs into fib_nl2rule") Signed-off-by: Roopa Prabhu Signed-off-by: David S. Miller --- net/core/fib_rules.c | 72 +++++++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 71 insertions(+), 1 deletion(-) diff --git a/net/core/fib_rules.c b/net/core/fib_rules.c index bc8425d81022..f64aa13811ea 100644 --- a/net/core/fib_rules.c +++ b/net/core/fib_rules.c @@ -444,6 +444,9 @@ static struct fib_rule *rule_find(struct fib_rules_ops *ops, if (rule->ip_proto && r->ip_proto != rule->ip_proto) continue; + if (rule->proto && r->proto != rule->proto) + continue; + if (fib_rule_port_range_set(&rule->sport_range) && !fib_rule_port_range_compare(&r->sport_range, &rule->sport_range)) @@ -653,6 +656,73 @@ errout: return err; } +static int rule_exists(struct fib_rules_ops *ops, struct fib_rule_hdr *frh, + struct nlattr **tb, struct fib_rule *rule) +{ + struct fib_rule *r; + + list_for_each_entry(r, &ops->rules_list, list) { + if (r->action != rule->action) + continue; + + if (r->table != rule->table) + continue; + + if (r->pref != rule->pref) + continue; + + if (memcmp(r->iifname, rule->iifname, IFNAMSIZ)) + continue; + + if (memcmp(r->oifname, rule->oifname, IFNAMSIZ)) + continue; + + if (r->mark != rule->mark) + continue; + + if (r->suppress_ifgroup != rule->suppress_ifgroup) + continue; + + if (r->suppress_prefixlen != rule->suppress_prefixlen) + continue; + + if (r->mark_mask != rule->mark_mask) + continue; + + if (r->tun_id != rule->tun_id) + continue; + + if (r->fr_net != rule->fr_net) + continue; + + if (r->l3mdev != rule->l3mdev) + continue; + + if (!uid_eq(r->uid_range.start, rule->uid_range.start) || + !uid_eq(r->uid_range.end, rule->uid_range.end)) + continue; + + if (r->ip_proto != rule->ip_proto) + continue; + + if (r->proto != rule->proto) + continue; + + if (!fib_rule_port_range_compare(&r->sport_range, + &rule->sport_range)) + continue; + + if (!fib_rule_port_range_compare(&r->dport_range, + &rule->dport_range)) + continue; + + if (!ops->compare(r, frh, tb)) + continue; + return 1; + } + return 0; +} + int fib_nl_newrule(struct sk_buff *skb, struct nlmsghdr *nlh, struct netlink_ext_ack *extack) { @@ -687,7 +757,7 @@ int fib_nl_newrule(struct sk_buff *skb, struct nlmsghdr *nlh, goto errout; if ((nlh->nlmsg_flags & NLM_F_EXCL) && - rule_find(ops, frh, tb, rule, user_priority)) { + rule_exists(ops, frh, tb, rule)) { err = -EEXIST; goto errout_free; } -- cgit v1.2.3 From 9901c5d77e969d8215a8e8d087ef02e6feddc84c Mon Sep 17 00:00:00 2001 From: John Fastabend Date: Sat, 30 Jun 2018 06:17:36 -0700 Subject: bpf: sockmap, fix crash when ipv6 sock is added This fixes a crash where we assign tcp_prot to IPv6 sockets instead of tcpv6_prot. Previously we overwrote the sk->prot field with tcp_prot even in the AF_INET6 case. This patch ensures the correct tcp_prot and tcpv6_prot are used. Tested with 'netserver -6' and 'netperf -H [IPv6]' as well as 'netperf -H [IPv4]'. The ESTABLISHED check resolves the previously crashing case here. Fixes: 174a79ff9515 ("bpf: sockmap with sk redirect support") Reported-by: syzbot+5c063698bdbfac19f363@syzkaller.appspotmail.com Acked-by: Martin KaFai Lau Signed-off-by: John Fastabend Signed-off-by: Wei Wang Signed-off-by: Daniel Borkmann --- kernel/bpf/sockmap.c | 58 +++++++++++++++++++++++++++++++++++++++++++--------- 1 file changed, 48 insertions(+), 10 deletions(-) diff --git a/kernel/bpf/sockmap.c b/kernel/bpf/sockmap.c index 81d0c55a77aa..bfdfbd199c3b 100644 --- a/kernel/bpf/sockmap.c +++ b/kernel/bpf/sockmap.c @@ -140,6 +140,7 @@ static int bpf_tcp_recvmsg(struct sock *sk, struct msghdr *msg, size_t len, static int bpf_tcp_sendmsg(struct sock *sk, struct msghdr *msg, size_t size); static int bpf_tcp_sendpage(struct sock *sk, struct page *page, int offset, size_t size, int flags); +static void bpf_tcp_close(struct sock *sk, long timeout); static inline struct smap_psock *smap_psock_sk(const struct sock *sk) { @@ -161,7 +162,42 @@ out: return !empty; } -static struct proto tcp_bpf_proto; +enum { + SOCKMAP_IPV4, + SOCKMAP_IPV6, + SOCKMAP_NUM_PROTS, +}; + +enum { + SOCKMAP_BASE, + SOCKMAP_TX, + SOCKMAP_NUM_CONFIGS, +}; + +static struct proto *saved_tcpv6_prot __read_mostly; +static DEFINE_SPINLOCK(tcpv6_prot_lock); +static struct proto bpf_tcp_prots[SOCKMAP_NUM_PROTS][SOCKMAP_NUM_CONFIGS]; +static void build_protos(struct proto prot[SOCKMAP_NUM_CONFIGS], + struct proto *base) +{ + prot[SOCKMAP_BASE] = *base; + prot[SOCKMAP_BASE].close = bpf_tcp_close; + prot[SOCKMAP_BASE].recvmsg = bpf_tcp_recvmsg; + prot[SOCKMAP_BASE].stream_memory_read = bpf_tcp_stream_read; + + prot[SOCKMAP_TX] = prot[SOCKMAP_BASE]; + prot[SOCKMAP_TX].sendmsg = bpf_tcp_sendmsg; + prot[SOCKMAP_TX].sendpage = bpf_tcp_sendpage; +} + +static void update_sk_prot(struct sock *sk, struct smap_psock *psock) +{ + int family = sk->sk_family == AF_INET6 ? SOCKMAP_IPV6 : SOCKMAP_IPV4; + int conf = psock->bpf_tx_msg ? SOCKMAP_TX : SOCKMAP_BASE; + + sk->sk_prot = &bpf_tcp_prots[family][conf]; +} + static int bpf_tcp_init(struct sock *sk) { struct smap_psock *psock; @@ -181,14 +217,17 @@ static int bpf_tcp_init(struct sock *sk) psock->save_close = sk->sk_prot->close; psock->sk_proto = sk->sk_prot; - if (psock->bpf_tx_msg) { - tcp_bpf_proto.sendmsg = bpf_tcp_sendmsg; - tcp_bpf_proto.sendpage = bpf_tcp_sendpage; - tcp_bpf_proto.recvmsg = bpf_tcp_recvmsg; - tcp_bpf_proto.stream_memory_read = bpf_tcp_stream_read; + /* Build IPv6 sockmap whenever the address of tcpv6_prot changes */ + if (sk->sk_family == AF_INET6 && + unlikely(sk->sk_prot != smp_load_acquire(&saved_tcpv6_prot))) { + spin_lock_bh(&tcpv6_prot_lock); + if (likely(sk->sk_prot != saved_tcpv6_prot)) { + build_protos(bpf_tcp_prots[SOCKMAP_IPV6], sk->sk_prot); + smp_store_release(&saved_tcpv6_prot, sk->sk_prot); + } + spin_unlock_bh(&tcpv6_prot_lock); } - - sk->sk_prot = &tcp_bpf_proto; + update_sk_prot(sk, psock); rcu_read_unlock(); return 0; } @@ -1111,8 +1150,7 @@ static void bpf_tcp_msg_add(struct smap_psock *psock, static int bpf_tcp_ulp_register(void) { - tcp_bpf_proto = tcp_prot; - tcp_bpf_proto.close = bpf_tcp_close; + build_protos(bpf_tcp_prots[SOCKMAP_IPV4], &tcp_prot); /* Once BPF TX ULP is registered it is never unregistered. It * will be in the ULP list for the lifetime of the system. Doing * duplicate registers is not a problem. -- cgit v1.2.3 From 54fedb42c6537dcb0102e4a58a88456a6286999d Mon Sep 17 00:00:00 2001 From: John Fastabend Date: Sat, 30 Jun 2018 06:17:41 -0700 Subject: bpf: sockmap, fix smap_list_map_remove when psock is in many maps If a hashmap is free'd with open socks it removes the reference to the hash entry from the psock. If that is the last reference to the psock then it will also be free'd by the reference counting logic. However the current logic that removes the hash reference from the list of references is broken. In smap_list_remove() we first check if the sockmap entry matches and then check if the hashmap entry matches. But, the sockmap entry sill always match because its NULL in this case which causes the first entry to be removed from the list. If this is always the "right" entry (because the user adds/removes entries in order) then everything is OK but otherwise a subsequent bpf_tcp_close() may reference a free'd object. To fix this create two list handlers one for sockmap and one for sockhash. Reported-by: syzbot+0ce137753c78f7b6acc1@syzkaller.appspotmail.com Fixes: 81110384441a ("bpf: sockmap, add hash map support") Acked-by: Martin KaFai Lau Signed-off-by: John Fastabend Signed-off-by: Daniel Borkmann --- kernel/bpf/sockmap.c | 34 ++++++++++++++++++++++------------ 1 file changed, 22 insertions(+), 12 deletions(-) diff --git a/kernel/bpf/sockmap.c b/kernel/bpf/sockmap.c index bfdfbd199c3b..65a937ed5762 100644 --- a/kernel/bpf/sockmap.c +++ b/kernel/bpf/sockmap.c @@ -1602,17 +1602,27 @@ free_stab: return ERR_PTR(err); } -static void smap_list_remove(struct smap_psock *psock, - struct sock **entry, - struct htab_elem *hash_link) +static void smap_list_map_remove(struct smap_psock *psock, + struct sock **entry) { struct smap_psock_map_entry *e, *tmp; list_for_each_entry_safe(e, tmp, &psock->maps, list) { - if (e->entry == entry || e->hash_link == hash_link) { + if (e->entry == entry) + list_del(&e->list); + } +} + +static void smap_list_hash_remove(struct smap_psock *psock, + struct htab_elem *hash_link) +{ + struct smap_psock_map_entry *e, *tmp; + + list_for_each_entry_safe(e, tmp, &psock->maps, list) { + struct htab_elem *c = e->hash_link; + + if (c == hash_link) list_del(&e->list); - break; - } } } @@ -1647,7 +1657,7 @@ static void sock_map_free(struct bpf_map *map) * to be null and queued for garbage collection. */ if (likely(psock)) { - smap_list_remove(psock, &stab->sock_map[i], NULL); + smap_list_map_remove(psock, &stab->sock_map[i]); smap_release_sock(psock, sock); } write_unlock_bh(&sock->sk_callback_lock); @@ -1706,7 +1716,7 @@ static int sock_map_delete_elem(struct bpf_map *map, void *key) if (psock->bpf_parse) smap_stop_sock(psock, sock); - smap_list_remove(psock, &stab->sock_map[k], NULL); + smap_list_map_remove(psock, &stab->sock_map[k]); smap_release_sock(psock, sock); out: write_unlock_bh(&sock->sk_callback_lock); @@ -1908,7 +1918,7 @@ static int sock_map_ctx_update_elem(struct bpf_sock_ops_kern *skops, struct smap_psock *opsock = smap_psock_sk(osock); write_lock_bh(&osock->sk_callback_lock); - smap_list_remove(opsock, &stab->sock_map[i], NULL); + smap_list_map_remove(opsock, &stab->sock_map[i]); smap_release_sock(opsock, osock); write_unlock_bh(&osock->sk_callback_lock); } @@ -2142,7 +2152,7 @@ static void sock_hash_free(struct bpf_map *map) * (psock) to be null and queued for garbage collection. */ if (likely(psock)) { - smap_list_remove(psock, NULL, l); + smap_list_hash_remove(psock, l); smap_release_sock(psock, sock); } write_unlock_bh(&sock->sk_callback_lock); @@ -2322,7 +2332,7 @@ static int sock_hash_ctx_update_elem(struct bpf_sock_ops_kern *skops, psock = smap_psock_sk(l_old->sk); hlist_del_rcu(&l_old->hash_node); - smap_list_remove(psock, NULL, l_old); + smap_list_hash_remove(psock, l_old); smap_release_sock(psock, l_old->sk); free_htab_elem(htab, l_old); } @@ -2390,7 +2400,7 @@ static int sock_hash_delete_elem(struct bpf_map *map, void *key) * to be null and queued for garbage collection. */ if (likely(psock)) { - smap_list_remove(psock, NULL, l); + smap_list_hash_remove(psock, l); smap_release_sock(psock, sock); } write_unlock_bh(&sock->sk_callback_lock); -- cgit v1.2.3 From e9db4ef6bf4ca9894bb324c76e01b8f1a16b2650 Mon Sep 17 00:00:00 2001 From: John Fastabend Date: Sat, 30 Jun 2018 06:17:47 -0700 Subject: bpf: sockhash fix omitted bucket lock in sock_close First the sk_callback_lock() was being used to protect both the sock callback hooks and the psock->maps list. This got overly convoluted after the addition of sockhash (in sockmap it made some sense because masp and callbacks were tightly coupled) so lets split out a specific lock for maps and only use the callback lock for its intended purpose. This fixes a couple cases where we missed using maps lock when it was in fact needed. Also this makes it easier to follow the code because now we can put the locking closer to the actual code its serializing. Next, in sock_hash_delete_elem() the pattern was as follows, sock_hash_delete_elem() [...] spin_lock(bucket_lock) l = lookup_elem_raw() if (l) hlist_del_rcu() write_lock(sk_callback_lock) .... destroy psock ... write_unlock(sk_callback_lock) spin_unlock(bucket_lock) The ordering is necessary because we only know the {p}sock after dereferencing the hash table which we can't do unless we have the bucket lock held. Once we have the bucket lock and the psock element it is deleted from the hashmap to ensure any other path doing a lookup will fail. Finally, the refcnt is decremented and if zero the psock is destroyed. In parallel with the above (or free'ing the map) a tcp close event may trigger tcp_close(). Which at the moment omits the bucket lock altogether (oops!) where the flow looks like this, bpf_tcp_close() [...] write_lock(sk_callback_lock) for each psock->maps // list of maps this sock is part of hlist_del_rcu(ref_hash_node); .... destroy psock ... write_unlock(sk_callback_lock) Obviously, and demonstrated by syzbot, this is broken because we can have multiple threads deleting entries via hlist_del_rcu(). To fix this we might be tempted to wrap the hlist operation in a bucket lock but that would create a lock inversion problem. In summary to follow locking rules the psocks maps list needs the sk_callback_lock (after this patch maps_lock) but we need the bucket lock to do the hlist_del_rcu. To resolve the lock inversion problem pop the head of the maps list repeatedly and remove the reference until no more are left. If a delete happens in parallel from the BPF API that is OK as well because it will do a similar action, lookup the lock in the map/hash, delete it from the map/hash, and dec the refcnt. We check for this case before doing a destroy on the psock to ensure we don't have two threads tearing down a psock. The new logic is as follows, bpf_tcp_close() e = psock_map_pop(psock->maps) // done with map lock bucket_lock() // lock hash list bucket l = lookup_elem_raw(head, hash, key, key_size); if (l) { //only get here if elmnt was not already removed hlist_del_rcu() ... destroy psock... } bucket_unlock() And finally for all the above to work add missing locking around map operations per above. Then add RCU annotations and use rcu_dereference/rcu_assign_pointer to manage values relying on RCU so that the object is not free'd from sock_hash_free() while it is being referenced in bpf_tcp_close(). Reported-by: syzbot+0ce137753c78f7b6acc1@syzkaller.appspotmail.com Fixes: 81110384441a ("bpf: sockmap, add hash map support") Signed-off-by: John Fastabend Signed-off-by: Daniel Borkmann --- kernel/bpf/sockmap.c | 145 ++++++++++++++++++++++++++++++++++----------------- 1 file changed, 96 insertions(+), 49 deletions(-) diff --git a/kernel/bpf/sockmap.c b/kernel/bpf/sockmap.c index 65a937ed5762..ac09b35a9567 100644 --- a/kernel/bpf/sockmap.c +++ b/kernel/bpf/sockmap.c @@ -72,6 +72,7 @@ struct bpf_htab { u32 n_buckets; u32 elem_size; struct bpf_sock_progs progs; + struct rcu_head rcu; }; struct htab_elem { @@ -89,8 +90,8 @@ enum smap_psock_state { struct smap_psock_map_entry { struct list_head list; struct sock **entry; - struct htab_elem *hash_link; - struct bpf_htab *htab; + struct htab_elem __rcu *hash_link; + struct bpf_htab __rcu *htab; }; struct smap_psock { @@ -120,6 +121,7 @@ struct smap_psock { struct bpf_prog *bpf_parse; struct bpf_prog *bpf_verdict; struct list_head maps; + spinlock_t maps_lock; /* Back reference used when sock callback trigger sockmap operations */ struct sock *sock; @@ -258,16 +260,54 @@ out: rcu_read_unlock(); } +static struct htab_elem *lookup_elem_raw(struct hlist_head *head, + u32 hash, void *key, u32 key_size) +{ + struct htab_elem *l; + + hlist_for_each_entry_rcu(l, head, hash_node) { + if (l->hash == hash && !memcmp(&l->key, key, key_size)) + return l; + } + + return NULL; +} + +static inline struct bucket *__select_bucket(struct bpf_htab *htab, u32 hash) +{ + return &htab->buckets[hash & (htab->n_buckets - 1)]; +} + +static inline struct hlist_head *select_bucket(struct bpf_htab *htab, u32 hash) +{ + return &__select_bucket(htab, hash)->head; +} + static void free_htab_elem(struct bpf_htab *htab, struct htab_elem *l) { atomic_dec(&htab->count); kfree_rcu(l, rcu); } +static struct smap_psock_map_entry *psock_map_pop(struct sock *sk, + struct smap_psock *psock) +{ + struct smap_psock_map_entry *e; + + spin_lock_bh(&psock->maps_lock); + e = list_first_entry_or_null(&psock->maps, + struct smap_psock_map_entry, + list); + if (e) + list_del(&e->list); + spin_unlock_bh(&psock->maps_lock); + return e; +} + static void bpf_tcp_close(struct sock *sk, long timeout) { void (*close_fun)(struct sock *sk, long timeout); - struct smap_psock_map_entry *e, *tmp; + struct smap_psock_map_entry *e; struct sk_msg_buff *md, *mtmp; struct smap_psock *psock; struct sock *osk; @@ -286,7 +326,6 @@ static void bpf_tcp_close(struct sock *sk, long timeout) */ close_fun = psock->save_close; - write_lock_bh(&sk->sk_callback_lock); if (psock->cork) { free_start_sg(psock->sock, psock->cork); kfree(psock->cork); @@ -299,20 +338,38 @@ static void bpf_tcp_close(struct sock *sk, long timeout) kfree(md); } - list_for_each_entry_safe(e, tmp, &psock->maps, list) { + e = psock_map_pop(sk, psock); + while (e) { if (e->entry) { osk = cmpxchg(e->entry, sk, NULL); if (osk == sk) { - list_del(&e->list); smap_release_sock(psock, sk); } } else { - hlist_del_rcu(&e->hash_link->hash_node); - smap_release_sock(psock, e->hash_link->sk); - free_htab_elem(e->htab, e->hash_link); + struct htab_elem *link = rcu_dereference(e->hash_link); + struct bpf_htab *htab = rcu_dereference(e->htab); + struct hlist_head *head; + struct htab_elem *l; + struct bucket *b; + + b = __select_bucket(htab, link->hash); + head = &b->head; + raw_spin_lock_bh(&b->lock); + l = lookup_elem_raw(head, + link->hash, link->key, + htab->map.key_size); + /* If another thread deleted this object skip deletion. + * The refcnt on psock may or may not be zero. + */ + if (l) { + hlist_del_rcu(&link->hash_node); + smap_release_sock(psock, link->sk); + free_htab_elem(htab, link); + } + raw_spin_unlock_bh(&b->lock); } + e = psock_map_pop(sk, psock); } - write_unlock_bh(&sk->sk_callback_lock); rcu_read_unlock(); close_fun(sk, timeout); } @@ -1395,7 +1452,9 @@ static void smap_release_sock(struct smap_psock *psock, struct sock *sock) { if (refcount_dec_and_test(&psock->refcnt)) { tcp_cleanup_ulp(sock); + write_lock_bh(&sock->sk_callback_lock); smap_stop_sock(psock, sock); + write_unlock_bh(&sock->sk_callback_lock); clear_bit(SMAP_TX_RUNNING, &psock->state); rcu_assign_sk_user_data(sock, NULL); call_rcu_sched(&psock->rcu, smap_destroy_psock); @@ -1546,6 +1605,7 @@ static struct smap_psock *smap_init_psock(struct sock *sock, int node) INIT_LIST_HEAD(&psock->maps); INIT_LIST_HEAD(&psock->ingress); refcount_set(&psock->refcnt, 1); + spin_lock_init(&psock->maps_lock); rcu_assign_sk_user_data(sock, psock); sock_hold(sock); @@ -1607,10 +1667,12 @@ static void smap_list_map_remove(struct smap_psock *psock, { struct smap_psock_map_entry *e, *tmp; + spin_lock_bh(&psock->maps_lock); list_for_each_entry_safe(e, tmp, &psock->maps, list) { if (e->entry == entry) list_del(&e->list); } + spin_unlock_bh(&psock->maps_lock); } static void smap_list_hash_remove(struct smap_psock *psock, @@ -1618,12 +1680,14 @@ static void smap_list_hash_remove(struct smap_psock *psock, { struct smap_psock_map_entry *e, *tmp; + spin_lock_bh(&psock->maps_lock); list_for_each_entry_safe(e, tmp, &psock->maps, list) { - struct htab_elem *c = e->hash_link; + struct htab_elem *c = rcu_dereference(e->hash_link); if (c == hash_link) list_del(&e->list); } + spin_unlock_bh(&psock->maps_lock); } static void sock_map_free(struct bpf_map *map) @@ -1649,7 +1713,6 @@ static void sock_map_free(struct bpf_map *map) if (!sock) continue; - write_lock_bh(&sock->sk_callback_lock); psock = smap_psock_sk(sock); /* This check handles a racing sock event that can get the * sk_callback_lock before this case but after xchg happens @@ -1660,7 +1723,6 @@ static void sock_map_free(struct bpf_map *map) smap_list_map_remove(psock, &stab->sock_map[i]); smap_release_sock(psock, sock); } - write_unlock_bh(&sock->sk_callback_lock); } rcu_read_unlock(); @@ -1709,7 +1771,6 @@ static int sock_map_delete_elem(struct bpf_map *map, void *key) if (!sock) return -EINVAL; - write_lock_bh(&sock->sk_callback_lock); psock = smap_psock_sk(sock); if (!psock) goto out; @@ -1719,7 +1780,6 @@ static int sock_map_delete_elem(struct bpf_map *map, void *key) smap_list_map_remove(psock, &stab->sock_map[k]); smap_release_sock(psock, sock); out: - write_unlock_bh(&sock->sk_callback_lock); return 0; } @@ -1800,7 +1860,6 @@ static int __sock_map_ctx_update_elem(struct bpf_map *map, } } - write_lock_bh(&sock->sk_callback_lock); psock = smap_psock_sk(sock); /* 2. Do not allow inheriting programs if psock exists and has @@ -1857,7 +1916,9 @@ static int __sock_map_ctx_update_elem(struct bpf_map *map, if (err) goto out_free; smap_init_progs(psock, verdict, parse); + write_lock_bh(&sock->sk_callback_lock); smap_start_sock(psock, sock); + write_unlock_bh(&sock->sk_callback_lock); } /* 4. Place psock in sockmap for use and stop any programs on @@ -1867,9 +1928,10 @@ static int __sock_map_ctx_update_elem(struct bpf_map *map, */ if (map_link) { e->entry = map_link; + spin_lock_bh(&psock->maps_lock); list_add_tail(&e->list, &psock->maps); + spin_unlock_bh(&psock->maps_lock); } - write_unlock_bh(&sock->sk_callback_lock); return err; out_free: smap_release_sock(psock, sock); @@ -1880,7 +1942,6 @@ out_progs: } if (tx_msg) bpf_prog_put(tx_msg); - write_unlock_bh(&sock->sk_callback_lock); kfree(e); return err; } @@ -1917,10 +1978,8 @@ static int sock_map_ctx_update_elem(struct bpf_sock_ops_kern *skops, if (osock) { struct smap_psock *opsock = smap_psock_sk(osock); - write_lock_bh(&osock->sk_callback_lock); smap_list_map_remove(opsock, &stab->sock_map[i]); smap_release_sock(opsock, osock); - write_unlock_bh(&osock->sk_callback_lock); } out: return err; @@ -2109,14 +2168,13 @@ free_htab: return ERR_PTR(err); } -static inline struct bucket *__select_bucket(struct bpf_htab *htab, u32 hash) +static void __bpf_htab_free(struct rcu_head *rcu) { - return &htab->buckets[hash & (htab->n_buckets - 1)]; -} + struct bpf_htab *htab; -static inline struct hlist_head *select_bucket(struct bpf_htab *htab, u32 hash) -{ - return &__select_bucket(htab, hash)->head; + htab = container_of(rcu, struct bpf_htab, rcu); + bpf_map_area_free(htab->buckets); + kfree(htab); } static void sock_hash_free(struct bpf_map *map) @@ -2135,16 +2193,18 @@ static void sock_hash_free(struct bpf_map *map) */ rcu_read_lock(); for (i = 0; i < htab->n_buckets; i++) { - struct hlist_head *head = select_bucket(htab, i); + struct bucket *b = __select_bucket(htab, i); + struct hlist_head *head; struct hlist_node *n; struct htab_elem *l; + raw_spin_lock_bh(&b->lock); + head = &b->head; hlist_for_each_entry_safe(l, n, head, hash_node) { struct sock *sock = l->sk; struct smap_psock *psock; hlist_del_rcu(&l->hash_node); - write_lock_bh(&sock->sk_callback_lock); psock = smap_psock_sk(sock); /* This check handles a racing sock event that can get * the sk_callback_lock before this case but after xchg @@ -2155,13 +2215,12 @@ static void sock_hash_free(struct bpf_map *map) smap_list_hash_remove(psock, l); smap_release_sock(psock, sock); } - write_unlock_bh(&sock->sk_callback_lock); - kfree(l); + free_htab_elem(htab, l); } + raw_spin_unlock_bh(&b->lock); } rcu_read_unlock(); - bpf_map_area_free(htab->buckets); - kfree(htab); + call_rcu(&htab->rcu, __bpf_htab_free); } static struct htab_elem *alloc_sock_hash_elem(struct bpf_htab *htab, @@ -2188,19 +2247,6 @@ static struct htab_elem *alloc_sock_hash_elem(struct bpf_htab *htab, return l_new; } -static struct htab_elem *lookup_elem_raw(struct hlist_head *head, - u32 hash, void *key, u32 key_size) -{ - struct htab_elem *l; - - hlist_for_each_entry_rcu(l, head, hash_node) { - if (l->hash == hash && !memcmp(&l->key, key, key_size)) - return l; - } - - return NULL; -} - static inline u32 htab_map_hash(const void *key, u32 key_len) { return jhash(key, key_len, 0); @@ -2320,9 +2366,12 @@ static int sock_hash_ctx_update_elem(struct bpf_sock_ops_kern *skops, goto bucket_err; } - e->hash_link = l_new; - e->htab = container_of(map, struct bpf_htab, map); + rcu_assign_pointer(e->hash_link, l_new); + rcu_assign_pointer(e->htab, + container_of(map, struct bpf_htab, map)); + spin_lock_bh(&psock->maps_lock); list_add_tail(&e->list, &psock->maps); + spin_unlock_bh(&psock->maps_lock); /* add new element to the head of the list, so that * concurrent search will find it before old elem @@ -2392,7 +2441,6 @@ static int sock_hash_delete_elem(struct bpf_map *map, void *key) struct smap_psock *psock; hlist_del_rcu(&l->hash_node); - write_lock_bh(&sock->sk_callback_lock); psock = smap_psock_sk(sock); /* This check handles a racing sock event that can get the * sk_callback_lock before this case but after xchg happens @@ -2403,7 +2451,6 @@ static int sock_hash_delete_elem(struct bpf_map *map, void *key) smap_list_hash_remove(psock, l); smap_release_sock(psock, sock); } - write_unlock_bh(&sock->sk_callback_lock); free_htab_elem(htab, l); ret = 0; } -- cgit v1.2.3 From caac76a5170eb508529bbff9d9300e9c57126444 Mon Sep 17 00:00:00 2001 From: John Fastabend Date: Sat, 30 Jun 2018 06:17:52 -0700 Subject: bpf: sockhash, add release routine Add map_release_uref pointer to hashmap ops. This was dropped when original sockhash code was ported into bpf-next before initial commit. Fixes: 81110384441a ("bpf: sockmap, add hash map support") Acked-by: Martin KaFai Lau Signed-off-by: John Fastabend Signed-off-by: Daniel Borkmann --- kernel/bpf/sockmap.c | 1 + 1 file changed, 1 insertion(+) diff --git a/kernel/bpf/sockmap.c b/kernel/bpf/sockmap.c index ac09b35a9567..cf7b6a6dbd1f 100644 --- a/kernel/bpf/sockmap.c +++ b/kernel/bpf/sockmap.c @@ -2496,6 +2496,7 @@ const struct bpf_map_ops sock_hash_ops = { .map_get_next_key = sock_hash_get_next_key, .map_update_elem = sock_hash_update_elem, .map_delete_elem = sock_hash_delete_elem, + .map_release_uref = sock_map_release, }; BPF_CALL_4(bpf_sock_map_update, struct bpf_sock_ops_kern *, bpf_sock, -- cgit v1.2.3 From ae15a41a641449f536578b0d9ec0e4ade130deb5 Mon Sep 17 00:00:00 2001 From: Stafford Horne Date: Sun, 1 Jul 2018 14:17:36 +0900 Subject: openrisc: entry: Fix delay slot exception detection Originally in patch e6d20c55a4 ("openrisc: entry: Fix delay slot detection") I fixed delay slot detection, but only for QEMU. We missed that hardware delay slot detection using delay slot exception flag (DSX) was still broken. This was because QEMU set the DSX flag in both pre-exception supervision register (ESR) and supervision register (SR) register, but on real hardware the DSX flag is only set on the SR register during exceptions. Fix this by carrying the DSX flag into the SR register during exception. We also update the DSX flag read locations to read the value from the SR register not the pt_regs SR register which represents ESR. The ESR should never have the DSX flag set. In the process I updated/removed a few comments to match the current state. Including removing a comment saying that the DSX detection logic was inefficient and needed to be rewritten. I have tested this on QEMU with a patch ensuring it matches the hardware specification. Link: https://lists.gnu.org/archive/html/qemu-devel/2018-07/msg00000.html Fixes: e6d20c55a4 ("openrisc: entry: Fix delay slot detection") Signed-off-by: Stafford Horne --- arch/openrisc/kernel/entry.S | 8 +------- arch/openrisc/kernel/head.S | 9 ++++++--- arch/openrisc/kernel/traps.c | 2 +- 3 files changed, 8 insertions(+), 11 deletions(-) diff --git a/arch/openrisc/kernel/entry.S b/arch/openrisc/kernel/entry.S index 690d55272ba6..0c826ad6e994 100644 --- a/arch/openrisc/kernel/entry.S +++ b/arch/openrisc/kernel/entry.S @@ -277,12 +277,6 @@ EXCEPTION_ENTRY(_data_page_fault_handler) l.addi r3,r1,0 // pt_regs /* r4 set be EXCEPTION_HANDLE */ // effective address of fault - /* - * __PHX__: TODO - * - * all this can be written much simpler. look at - * DTLB miss handler in the CONFIG_GUARD_PROTECTED_CORE part - */ #ifdef CONFIG_OPENRISC_NO_SPR_SR_DSX l.lwz r6,PT_PC(r3) // address of an offending insn l.lwz r6,0(r6) // instruction that caused pf @@ -314,7 +308,7 @@ EXCEPTION_ENTRY(_data_page_fault_handler) #else - l.lwz r6,PT_SR(r3) // SR + l.mfspr r6,r0,SPR_SR // SR l.andi r6,r6,SPR_SR_DSX // check for delay slot exception l.sfne r6,r0 // exception happened in delay slot l.bnf 7f diff --git a/arch/openrisc/kernel/head.S b/arch/openrisc/kernel/head.S index fb02b2a1d6f2..9fc6b60140f0 100644 --- a/arch/openrisc/kernel/head.S +++ b/arch/openrisc/kernel/head.S @@ -210,8 +210,7 @@ * r4 - EEAR exception EA * r10 - current pointing to current_thread_info struct * r12 - syscall 0, since we didn't come from syscall - * r13 - temp it actually contains new SR, not needed anymore - * r31 - handler address of the handler we'll jump to + * r30 - handler address of the handler we'll jump to * * handler has to save remaining registers to the exception * ksp frame *before* tainting them! @@ -244,6 +243,7 @@ /* r1 is KSP, r30 is __pa(KSP) */ ;\ tophys (r30,r1) ;\ l.sw PT_GPR12(r30),r12 ;\ + /* r4 use for tmp before EA */ ;\ l.mfspr r12,r0,SPR_EPCR_BASE ;\ l.sw PT_PC(r30),r12 ;\ l.mfspr r12,r0,SPR_ESR_BASE ;\ @@ -263,7 +263,10 @@ /* r12 == 1 if we come from syscall */ ;\ CLEAR_GPR(r12) ;\ /* ----- turn on MMU ----- */ ;\ - l.ori r30,r0,(EXCEPTION_SR) ;\ + /* Carry DSX into exception SR */ ;\ + l.mfspr r30,r0,SPR_SR ;\ + l.andi r30,r30,SPR_SR_DSX ;\ + l.ori r30,r30,(EXCEPTION_SR) ;\ l.mtspr r0,r30,SPR_ESR_BASE ;\ /* r30: EA address of handler */ ;\ LOAD_SYMBOL_2_GPR(r30,handler) ;\ diff --git a/arch/openrisc/kernel/traps.c b/arch/openrisc/kernel/traps.c index fac246e6f37a..d8981cbb852a 100644 --- a/arch/openrisc/kernel/traps.c +++ b/arch/openrisc/kernel/traps.c @@ -300,7 +300,7 @@ static inline int in_delay_slot(struct pt_regs *regs) return 0; } #else - return regs->sr & SPR_SR_DSX; + return mfspr(SPR_SR) & SPR_SR_DSX; #endif } -- cgit v1.2.3 From 1236f22fbae15df3736ab4a984c64c0c6ee6254c Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ilpo=20J=C3=A4rvinen?= Date: Fri, 29 Jun 2018 13:07:53 +0300 Subject: tcp: prevent bogus FRTO undos with non-SACK flows MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If SACK is not enabled and the first cumulative ACK after the RTO retransmission covers more than the retransmitted skb, a spurious FRTO undo will trigger (assuming FRTO is enabled for that RTO). The reason is that any non-retransmitted segment acknowledged will set FLAG_ORIG_SACK_ACKED in tcp_clean_rtx_queue even if there is no indication that it would have been delivered for real (the scoreboard is not kept with TCPCB_SACKED_ACKED bits in the non-SACK case so the check for that bit won't help like it does with SACK). Having FLAG_ORIG_SACK_ACKED set results in the spurious FRTO undo in tcp_process_loss. We need to use more strict condition for non-SACK case and check that none of the cumulatively ACKed segments were retransmitted to prove that progress is due to original transmissions. Only then keep FLAG_ORIG_SACK_ACKED set, allowing FRTO undo to proceed in non-SACK case. (FLAG_ORIG_SACK_ACKED is planned to be renamed to FLAG_ORIG_PROGRESS to better indicate its purpose but to keep this change minimal, it will be done in another patch). Besides burstiness and congestion control violations, this problem can result in RTO loop: When the loss recovery is prematurely undoed, only new data will be transmitted (if available) and the next retransmission can occur only after a new RTO which in case of multiple losses (that are not for consecutive packets) requires one RTO per loss to recover. Signed-off-by: Ilpo Järvinen Tested-by: Neal Cardwell Acked-by: Neal Cardwell Signed-off-by: David S. Miller --- net/ipv4/tcp_input.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index 045d930d01a9..8e5522c6833a 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -3181,6 +3181,15 @@ static int tcp_clean_rtx_queue(struct sock *sk, u32 prior_fack, if (tcp_is_reno(tp)) { tcp_remove_reno_sacks(sk, pkts_acked); + + /* If any of the cumulatively ACKed segments was + * retransmitted, non-SACK case cannot confirm that + * progress was due to original transmission due to + * lack of TCPCB_SACKED_ACKED bits even if some of + * the packets may have been never retransmitted. + */ + if (flag & FLAG_RETRANS_DATA_ACKED) + flag &= ~FLAG_ORIG_SACK_ACKED; } else { int delta; -- cgit v1.2.3 From 021c91791a5e7e85c567452f1be3e4c2c6cb6063 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 1 Jul 2018 16:04:53 -0700 Subject: Linux 4.18-rc3 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index c9132594860b..c5ce55cbc543 100644 --- a/Makefile +++ b/Makefile @@ -2,7 +2,7 @@ VERSION = 4 PATCHLEVEL = 18 SUBLEVEL = 0 -EXTRAVERSION = -rc2 +EXTRAVERSION = -rc3 NAME = Merciless Moray # *DOCUMENTATION* -- cgit v1.2.3 From 603d4cf8fe095b1ee78f423d514427be507fb513 Mon Sep 17 00:00:00 2001 From: Sabrina Dubroca Date: Sat, 30 Jun 2018 17:38:55 +0200 Subject: net: fix use-after-free in GRO with ESP Since the addition of GRO for ESP, gro_receive can consume the skb and return -EINPROGRESS. In that case, the lower layer GRO handler cannot touch the skb anymore. Commit 5f114163f2f5 ("net: Add a skb_gro_flush_final helper.") converted some of the gro_receive handlers that can lead to ESP's gro_receive so that they wouldn't access the skb when -EINPROGRESS is returned, but missed other spots, mainly in tunneling protocols. This patch finishes the conversion to using skb_gro_flush_final(), and adds a new helper, skb_gro_flush_final_remcsum(), used in VXLAN and GUE. Fixes: 5f114163f2f5 ("net: Add a skb_gro_flush_final helper.") Signed-off-by: Sabrina Dubroca Reviewed-by: Stefano Brivio Signed-off-by: David S. Miller --- drivers/net/geneve.c | 2 +- drivers/net/vxlan.c | 4 +--- include/linux/netdevice.h | 20 ++++++++++++++++++++ net/8021q/vlan.c | 2 +- net/ipv4/fou.c | 4 +--- net/ipv4/gre_offload.c | 2 +- net/ipv4/udp_offload.c | 2 +- 7 files changed, 26 insertions(+), 10 deletions(-) diff --git a/drivers/net/geneve.c b/drivers/net/geneve.c index 750eaa53bf0c..ada33c2d9ac2 100644 --- a/drivers/net/geneve.c +++ b/drivers/net/geneve.c @@ -476,7 +476,7 @@ static struct sk_buff **geneve_gro_receive(struct sock *sk, out_unlock: rcu_read_unlock(); out: - NAPI_GRO_CB(skb)->flush |= flush; + skb_gro_flush_final(skb, pp, flush); return pp; } diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c index aee0e60471f1..f6bb1d54d4bd 100644 --- a/drivers/net/vxlan.c +++ b/drivers/net/vxlan.c @@ -623,9 +623,7 @@ static struct sk_buff **vxlan_gro_receive(struct sock *sk, flush = 0; out: - skb_gro_remcsum_cleanup(skb, &grc); - skb->remcsum_offload = 0; - NAPI_GRO_CB(skb)->flush |= flush; + skb_gro_flush_final_remcsum(skb, pp, flush, &grc); return pp; } diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 3ec9850c7936..3d0cc0b5cec2 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -2789,11 +2789,31 @@ static inline void skb_gro_flush_final(struct sk_buff *skb, struct sk_buff **pp, if (PTR_ERR(pp) != -EINPROGRESS) NAPI_GRO_CB(skb)->flush |= flush; } +static inline void skb_gro_flush_final_remcsum(struct sk_buff *skb, + struct sk_buff **pp, + int flush, + struct gro_remcsum *grc) +{ + if (PTR_ERR(pp) != -EINPROGRESS) { + NAPI_GRO_CB(skb)->flush |= flush; + skb_gro_remcsum_cleanup(skb, grc); + skb->remcsum_offload = 0; + } +} #else static inline void skb_gro_flush_final(struct sk_buff *skb, struct sk_buff **pp, int flush) { NAPI_GRO_CB(skb)->flush |= flush; } +static inline void skb_gro_flush_final_remcsum(struct sk_buff *skb, + struct sk_buff **pp, + int flush, + struct gro_remcsum *grc) +{ + NAPI_GRO_CB(skb)->flush |= flush; + skb_gro_remcsum_cleanup(skb, grc); + skb->remcsum_offload = 0; +} #endif static inline int dev_hard_header(struct sk_buff *skb, struct net_device *dev, diff --git a/net/8021q/vlan.c b/net/8021q/vlan.c index 73a65789271b..8ccee3d01822 100644 --- a/net/8021q/vlan.c +++ b/net/8021q/vlan.c @@ -693,7 +693,7 @@ static struct sk_buff **vlan_gro_receive(struct sk_buff **head, out_unlock: rcu_read_unlock(); out: - NAPI_GRO_CB(skb)->flush |= flush; + skb_gro_flush_final(skb, pp, flush); return pp; } diff --git a/net/ipv4/fou.c b/net/ipv4/fou.c index 1540db65241a..c9ec1603666b 100644 --- a/net/ipv4/fou.c +++ b/net/ipv4/fou.c @@ -448,9 +448,7 @@ next_proto: out_unlock: rcu_read_unlock(); out: - NAPI_GRO_CB(skb)->flush |= flush; - skb_gro_remcsum_cleanup(skb, &grc); - skb->remcsum_offload = 0; + skb_gro_flush_final_remcsum(skb, pp, flush, &grc); return pp; } diff --git a/net/ipv4/gre_offload.c b/net/ipv4/gre_offload.c index 1859c473b21a..6a7d980105f6 100644 --- a/net/ipv4/gre_offload.c +++ b/net/ipv4/gre_offload.c @@ -223,7 +223,7 @@ static struct sk_buff **gre_gro_receive(struct sk_buff **head, out_unlock: rcu_read_unlock(); out: - NAPI_GRO_CB(skb)->flush |= flush; + skb_gro_flush_final(skb, pp, flush); return pp; } diff --git a/net/ipv4/udp_offload.c b/net/ipv4/udp_offload.c index 92dc9e5a7ff3..69c54540d5b4 100644 --- a/net/ipv4/udp_offload.c +++ b/net/ipv4/udp_offload.c @@ -394,7 +394,7 @@ unflush: out_unlock: rcu_read_unlock(); out: - NAPI_GRO_CB(skb)->flush |= flush; + skb_gro_flush_final(skb, pp, flush); return pp; } EXPORT_SYMBOL(udp_gro_receive); -- cgit v1.2.3 From fc9c2029e37c3ae9efc28bf47045e0b87e09660c Mon Sep 17 00:00:00 2001 From: Eric Biggers Date: Sat, 30 Jun 2018 15:26:56 -0700 Subject: ipv6: sr: fix passing wrong flags to crypto_alloc_shash() The 'mask' argument to crypto_alloc_shash() uses the CRYPTO_ALG_* flags, not 'gfp_t'. So don't pass GFP_KERNEL to it. Fixes: bf355b8d2c30 ("ipv6: sr: add core files for SR HMAC support") Signed-off-by: Eric Biggers Signed-off-by: David S. Miller --- net/ipv6/seg6_hmac.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv6/seg6_hmac.c b/net/ipv6/seg6_hmac.c index 33fb35cbfac1..558fe8cc6d43 100644 --- a/net/ipv6/seg6_hmac.c +++ b/net/ipv6/seg6_hmac.c @@ -373,7 +373,7 @@ static int seg6_hmac_init_algo(void) return -ENOMEM; for_each_possible_cpu(cpu) { - tfm = crypto_alloc_shash(algo->name, 0, GFP_KERNEL); + tfm = crypto_alloc_shash(algo->name, 0, 0); if (IS_ERR(tfm)) return PTR_ERR(tfm); p_tfm = per_cpu_ptr(algo->tfms, cpu); -- cgit v1.2.3 From 5dc2d3996a8b221c20dd0900bdad45031a572530 Mon Sep 17 00:00:00 2001 From: Hangbin Liu Date: Sun, 1 Jul 2018 16:21:21 +0800 Subject: ipvlan: call dev_change_flags when ipvlan mode is reset After we change the ipvlan mode from l3 to l2, or vice versa, we only reset IFF_NOARP flag, but don't flush the ARP table cache, which will cause eth->h_dest to be equal to eth->h_source in ipvlan_xmit_mode_l2(). Then the message will not come out of host. Here is the reproducer on local host: ip link set eth1 up ip addr add 192.168.1.1/24 dev eth1 ip link add link eth1 ipvlan1 type ipvlan mode l3 ip netns add net1 ip link set ipvlan1 netns net1 ip netns exec net1 ip link set ipvlan1 up ip netns exec net1 ip addr add 192.168.2.1/24 dev ipvlan1 ip route add 192.168.2.0/24 via 192.168.1.2 ping 192.168.2.2 -c 2 ip netns exec net1 ip link set ipvlan1 type ipvlan mode l2 ping 192.168.2.2 -c 2 Add the same configuration on remote host. After we set the mode to l2, we could find that the src/dst MAC addresses are the same on eth1: 21:26:06.648565 00:b7:13:ad:d3:05 > 00:b7:13:ad:d3:05, ethertype IPv4 (0x0800), length 98: (tos 0x0, ttl 64, id 58356, offset 0, flags [DF], proto ICMP (1), length 84) 192.168.2.1 > 192.168.2.2: ICMP echo request, id 22686, seq 1, length 64 Fix this by calling dev_change_flags(), which will call netdevice notifier with flag change info. v2: a) As pointed out by Wang Cong, check return value for dev_change_flags() when change dev flags. b) As suggested by Stefano and Sabrina, move flags setting before l3mdev_ops. So we don't need to redo ipvlan_{, un}register_nf_hook() again in err path. Reported-by: Jianlin Shi Reviewed-by: Stefano Brivio Reviewed-by: Sabrina Dubroca Fixes: 2ad7bf3638411 ("ipvlan: Initial check-in of the IPVLAN driver.") Signed-off-by: Hangbin Liu Signed-off-by: David S. Miller --- drivers/net/ipvlan/ipvlan_main.c | 36 ++++++++++++++++++++++++++++-------- 1 file changed, 28 insertions(+), 8 deletions(-) diff --git a/drivers/net/ipvlan/ipvlan_main.c b/drivers/net/ipvlan/ipvlan_main.c index 23c1d6600241..4a949569ec4c 100644 --- a/drivers/net/ipvlan/ipvlan_main.c +++ b/drivers/net/ipvlan/ipvlan_main.c @@ -75,10 +75,23 @@ static int ipvlan_set_port_mode(struct ipvl_port *port, u16 nval) { struct ipvl_dev *ipvlan; struct net_device *mdev = port->dev; - int err = 0; + unsigned int flags; + int err; ASSERT_RTNL(); if (port->mode != nval) { + list_for_each_entry(ipvlan, &port->ipvlans, pnode) { + flags = ipvlan->dev->flags; + if (nval == IPVLAN_MODE_L3 || nval == IPVLAN_MODE_L3S) { + err = dev_change_flags(ipvlan->dev, + flags | IFF_NOARP); + } else { + err = dev_change_flags(ipvlan->dev, + flags & ~IFF_NOARP); + } + if (unlikely(err)) + goto fail; + } if (nval == IPVLAN_MODE_L3S) { /* New mode is L3S */ err = ipvlan_register_nf_hook(read_pnet(&port->pnet)); @@ -86,21 +99,28 @@ static int ipvlan_set_port_mode(struct ipvl_port *port, u16 nval) mdev->l3mdev_ops = &ipvl_l3mdev_ops; mdev->priv_flags |= IFF_L3MDEV_MASTER; } else - return err; + goto fail; } else if (port->mode == IPVLAN_MODE_L3S) { /* Old mode was L3S */ mdev->priv_flags &= ~IFF_L3MDEV_MASTER; ipvlan_unregister_nf_hook(read_pnet(&port->pnet)); mdev->l3mdev_ops = NULL; } - list_for_each_entry(ipvlan, &port->ipvlans, pnode) { - if (nval == IPVLAN_MODE_L3 || nval == IPVLAN_MODE_L3S) - ipvlan->dev->flags |= IFF_NOARP; - else - ipvlan->dev->flags &= ~IFF_NOARP; - } port->mode = nval; } + return 0; + +fail: + /* Undo the flags changes that have been done so far. */ + list_for_each_entry_continue_reverse(ipvlan, &port->ipvlans, pnode) { + flags = ipvlan->dev->flags; + if (port->mode == IPVLAN_MODE_L3 || + port->mode == IPVLAN_MODE_L3S) + dev_change_flags(ipvlan->dev, flags | IFF_NOARP); + else + dev_change_flags(ipvlan->dev, flags & ~IFF_NOARP); + } + return err; } -- cgit v1.2.3 From bb7858ba1102f82470a917e041fd23e6385c31be Mon Sep 17 00:00:00 2001 From: Sudarsana Reddy Kalluru Date: Sun, 1 Jul 2018 20:03:05 -0700 Subject: qed: Limit msix vectors in kdump kernel to the minimum required count. Memory size is limited in the kdump kernel environment. Allocation of more msix-vectors (or queues) consumes few tens of MBs of memory, which might lead to the kdump kernel failure. This patch adds changes to limit the number of MSI-X vectors in kdump kernel to minimum required value (i.e., 2 per engine). Fixes: fe56b9e6a ("qed: Add module with basic common support") Signed-off-by: Sudarsana Reddy Kalluru Signed-off-by: Michal Kalderon Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_main.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/net/ethernet/qlogic/qed/qed_main.c b/drivers/net/ethernet/qlogic/qed/qed_main.c index 5c10fd7210c3..0cbc74d6ca8b 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_main.c +++ b/drivers/net/ethernet/qlogic/qed/qed_main.c @@ -789,6 +789,14 @@ static int qed_slowpath_setup_int(struct qed_dev *cdev, /* We want a minimum of one slowpath and one fastpath vector per hwfn */ cdev->int_params.in.min_msix_cnt = cdev->num_hwfns * 2; + if (is_kdump_kernel()) { + DP_INFO(cdev, + "Kdump kernel: Limit the max number of requested MSI-X vectors to %hd\n", + cdev->int_params.in.min_msix_cnt); + cdev->int_params.in.num_vectors = + cdev->int_params.in.min_msix_cnt; + } + rc = qed_set_int_mode(cdev, false); if (rc) { DP_ERR(cdev, "qed_slowpath_setup_int ERR\n"); -- cgit v1.2.3 From 538f8d00ba8bb417c4d9e76c61dee59d812d8287 Mon Sep 17 00:00:00 2001 From: Sudarsana Reddy Kalluru Date: Sun, 1 Jul 2018 20:03:06 -0700 Subject: qed: Fix setting of incorrect eswitch mode. By default, driver sets the eswitch mode incorrectly as VEB (virtual Ethernet bridging). Need to set VEB eswitch mode only when sriov is enabled, and it should be to set NONE by default. The patch incorporates this change. Fixes: 0fefbfbaa ("qed*: Management firmware - notifications and defaults") Signed-off-by: Sudarsana Reddy Kalluru Signed-off-by: Michal Kalderon Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_dev.c | 2 +- drivers/net/ethernet/qlogic/qed/qed_sriov.c | 19 +++++++++++++++++-- 2 files changed, 18 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/qlogic/qed/qed_dev.c b/drivers/net/ethernet/qlogic/qed/qed_dev.c index 329781cda77f..e5249b4741d0 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_dev.c +++ b/drivers/net/ethernet/qlogic/qed/qed_dev.c @@ -1804,7 +1804,7 @@ int qed_hw_init(struct qed_dev *cdev, struct qed_hw_init_params *p_params) DP_INFO(p_hwfn, "Failed to update driver state\n"); rc = qed_mcp_ov_update_eswitch(p_hwfn, p_hwfn->p_main_ptt, - QED_OV_ESWITCH_VEB); + QED_OV_ESWITCH_NONE); if (rc) DP_INFO(p_hwfn, "Failed to update eswitch mode\n"); } diff --git a/drivers/net/ethernet/qlogic/qed/qed_sriov.c b/drivers/net/ethernet/qlogic/qed/qed_sriov.c index f01bf52bc381..fd59cf45f4be 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_sriov.c +++ b/drivers/net/ethernet/qlogic/qed/qed_sriov.c @@ -4513,6 +4513,8 @@ static void qed_sriov_enable_qid_config(struct qed_hwfn *hwfn, static int qed_sriov_enable(struct qed_dev *cdev, int num) { struct qed_iov_vf_init_params params; + struct qed_hwfn *hwfn; + struct qed_ptt *ptt; int i, j, rc; if (num >= RESC_NUM(&cdev->hwfns[0], QED_VPORT)) { @@ -4525,8 +4527,8 @@ static int qed_sriov_enable(struct qed_dev *cdev, int num) /* Initialize HW for VF access */ for_each_hwfn(cdev, j) { - struct qed_hwfn *hwfn = &cdev->hwfns[j]; - struct qed_ptt *ptt = qed_ptt_acquire(hwfn); + hwfn = &cdev->hwfns[j]; + ptt = qed_ptt_acquire(hwfn); /* Make sure not to use more than 16 queues per VF */ params.num_queues = min_t(int, @@ -4562,6 +4564,19 @@ static int qed_sriov_enable(struct qed_dev *cdev, int num) goto err; } + hwfn = QED_LEADING_HWFN(cdev); + ptt = qed_ptt_acquire(hwfn); + if (!ptt) { + DP_ERR(hwfn, "Failed to acquire ptt\n"); + rc = -EBUSY; + goto err; + } + + rc = qed_mcp_ov_update_eswitch(hwfn, ptt, QED_OV_ESWITCH_VEB); + if (rc) + DP_INFO(cdev, "Failed to update eswitch mode\n"); + qed_ptt_release(hwfn, ptt); + return num; err: -- cgit v1.2.3 From cc9b27cdf7bd3c86df73439758ac1564bc8f5bbe Mon Sep 17 00:00:00 2001 From: Sudarsana Reddy Kalluru Date: Sun, 1 Jul 2018 20:03:07 -0700 Subject: qed: Fix use of incorrect size in memcpy call. Use the correct size value while copying chassis/port id values. Fixes: 6ad8c632e ("qed: Add support for query/config dcbx.") Signed-off-by: Sudarsana Reddy Kalluru Signed-off-by: Michal Kalderon Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_dcbx.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/qlogic/qed/qed_dcbx.c b/drivers/net/ethernet/qlogic/qed/qed_dcbx.c index f0b01385d5cb..e0680ce91328 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_dcbx.c +++ b/drivers/net/ethernet/qlogic/qed/qed_dcbx.c @@ -709,9 +709,9 @@ qed_dcbx_get_local_lldp_params(struct qed_hwfn *p_hwfn, p_local = &p_hwfn->p_dcbx_info->lldp_local[LLDP_NEAREST_BRIDGE]; memcpy(params->lldp_local.local_chassis_id, p_local->local_chassis_id, - ARRAY_SIZE(p_local->local_chassis_id)); + sizeof(p_local->local_chassis_id)); memcpy(params->lldp_local.local_port_id, p_local->local_port_id, - ARRAY_SIZE(p_local->local_port_id)); + sizeof(p_local->local_port_id)); } static void @@ -723,9 +723,9 @@ qed_dcbx_get_remote_lldp_params(struct qed_hwfn *p_hwfn, p_remote = &p_hwfn->p_dcbx_info->lldp_remote[LLDP_NEAREST_BRIDGE]; memcpy(params->lldp_remote.peer_chassis_id, p_remote->peer_chassis_id, - ARRAY_SIZE(p_remote->peer_chassis_id)); + sizeof(p_remote->peer_chassis_id)); memcpy(params->lldp_remote.peer_port_id, p_remote->peer_port_id, - ARRAY_SIZE(p_remote->peer_port_id)); + sizeof(p_remote->peer_port_id)); } static int -- cgit v1.2.3 From 82a4e71b1565dea8387f54503e806cf374e779ec Mon Sep 17 00:00:00 2001 From: Sudarsana Reddy Kalluru Date: Sun, 1 Jul 2018 20:03:08 -0700 Subject: qede: Adverstise software timestamp caps when PHC is not available. When ptp clock is not available for a PF (e.g., higher PFs in NPAR mode), get-tsinfo() callback should return the software timestamp capabilities instead of returning the error. Fixes: 4c55215c ("qede: Add driver support for PTP") Signed-off-by: Sudarsana Reddy Kalluru Signed-off-by: Michal Kalderon Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qede/qede_ptp.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/qlogic/qede/qede_ptp.c b/drivers/net/ethernet/qlogic/qede/qede_ptp.c index 02adb513f475..013ff567283c 100644 --- a/drivers/net/ethernet/qlogic/qede/qede_ptp.c +++ b/drivers/net/ethernet/qlogic/qede/qede_ptp.c @@ -337,8 +337,14 @@ int qede_ptp_get_ts_info(struct qede_dev *edev, struct ethtool_ts_info *info) { struct qede_ptp *ptp = edev->ptp; - if (!ptp) - return -EIO; + if (!ptp) { + info->so_timestamping = SOF_TIMESTAMPING_TX_SOFTWARE | + SOF_TIMESTAMPING_RX_SOFTWARE | + SOF_TIMESTAMPING_SOFTWARE; + info->phc_index = -1; + + return 0; + } info->so_timestamping = SOF_TIMESTAMPING_TX_SOFTWARE | SOF_TIMESTAMPING_RX_SOFTWARE | -- cgit v1.2.3