aboutsummaryrefslogtreecommitdiffstats
path: root/tools
Commit message (Collapse)AuthorAgeFilesLines
* ACPICA: acpidump: Fix truncated RSDP signature validation.Lv Zheng2014-05-071-10/+31
| | | | | | | | | | | This patch enforces a rule to always use ACPI_VALIDATE_RSDP_SIG for RSDP signatures passed from table header or ACPI_SIG_RSDP so that truncated string comparison can be avoided. This could help to fix the issue that "RSD " matches but "RSD PTR " doesn't match. Lv Zheng. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* ACPICA: acpidump: Fix code issue in invoking fread in the loop.Lv Zheng2014-05-071-11/+6
| | | | | | | | | | | | | | | | This patch fixes an issue that the while loop is not needed as fread() should return exact the bytes of expected. The patch is tested by runing diff against the output of "-c" mode and the normal mode, and only finds the following differences: 1. table addresses: the "-c" mode will always fill 0x0000000000000000 for the address. 2. RSDP/RSDT/XSDT: there is no generation of such tables for "-c" mode. So the test result shows the fix is valid. Lv Zheng. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* Merge back earlier ACPICA material.Rafael J. Wysocki2014-05-0712-574/+3216
|\
| * Merge back earlier ACPICA material.Rafael J. Wysocki2014-04-2812-574/+3216
| |\
| | * ACPICA: acpidump: Update man page.Lv Zheng2014-04-201-12/+73
| | | | | | | | | | | | | | | | | | | | | | | | This patch updates man file of acpidump. Signed-off-by: Lv Zheng <lv.zheng@intel.com> [rjw: Subject] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
| | * ACPICA: acpidump: Remove old acpidump source.Lv Zheng2014-04-201-559/+0
| | | | | | | | | | | | | | | | | | | | | This patch removes old acpidump source. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
| | * ACPICA: acpidump: Update Makefile to build acpidump from ACPICA.Lv Zheng2014-04-201-3/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch updates tools Makefile to use new acpidump. ACPICA's acpidump relies on various ACPICA components/common/os_specific source code. They are located in various kernel folders, being searched and compiled using vpath technique in Makefile. These files include: 1. drivers/acpi/acpica/acapps.h 2. tools/power/acpi/common/getopt.c 3. tools/power/acpi/common/cmfsize.c 4. tools/power/acpi/os_specific/service_layers/oslinuxtbl.c 5. tools/power/acpi/os_specific/service_layers/osunixdir.c 6. tools/power/acpi/os_specific/service_layers/osunixmap.c This patch has been tested on DELL Inspiron Mini, acpidump output can be successfully generated by typing the following commands: # cd tools/power/acpi # make DEBUG=false # sudo make install DESTDIR=/opt # sudo make uninstall DESTDIR=/opt # make clean Or # cd tools # make acpi # sudo make acpi_install # sudo make acpi_uninstall # make acpi_clean A kernel build test is also performed on DELL Inspiron Mini to verify that the changes done to actypes.h and aclinux.h won't affect the kernel build process. Signed-off-by: Lv Zheng <lv.zheng@intel.com> [rjw: Subject] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
| | * ACPICA: acpidump: Update new structures and add missing file.Lv Zheng2014-04-201-0/+101
| | | | | | | | | | | | | | | | | | | | | | | | This patch is the generation of a commit that updates release automation with newly added structures and files that are referenced by the acpidump. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
| | * ACPICA: acpidump: Add support to generate acpidump release.Lv Zheng2014-04-208-0/+3019
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The acpidump is initiated by Bob Moore and Chao Guan, fixed and completed by Lv Zheng. This patch is a generation of the commit that adds acpidump release automation into ACPICA release process. Lv Zheng. Note that this patch doesn't replace the kernel shipped acpidump with the new acpidump. The replacement is done by further patches. Original-by: Chao Guan <guanchao@mail.ustc.edu.cn> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* | | Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds2014-05-019-22/+64
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Mostly tooling fixes, plus an Intel RAPL PMU driver fix" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf tests x86: Fix stack map lookup in dwarf unwind test perf x86: Fix perf to use non-executable stack, again perf tools: Remove extra '/' character in events file path perf machine: Search for modules in %s/lib/modules/%s perf tests: Add static build make test perf tools: Fix bfd dependency libraries detection perf tools: Use LDFLAGS instead of ALL_LDFLAGS perf/x86: Fix RAPL rdmsrl_safe() usage tools lib traceevent: Fix memory leak in pretty_print() tools lib traceevent: Fix backward compatibility macros for pevent filter enums perf tools: Disable libdw unwind for all but x86 arch perf tests x86: Fix memory leak in sample_ustack()
| * | | perf tests x86: Fix stack map lookup in dwarf unwind testJiri Olsa2014-04-301-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Previous commit 'perf x86: Fix perf to use non-executable stack, again' moved stack map into MAP__VARIABLE map type again. Fixing the dwarf unwind test stack map lookup appropriately. Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Jean Pihet <jean.pihet@linaro.org> Link: http://lkml.kernel.org/n/tip-ttzyhbe4zls24z7ednkmhvxl@git.kernel.org Signed-off-by: Jiri Olsa <jolsa@kernel.org>
| * | | perf x86: Fix perf to use non-executable stack, againMathias Krause2014-04-302-1/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | arch/x86/tests/regs_load.S is missing the linker note about the stack requirements, therefore making the linker fall back to an executable stack. As this object gets linked against the final perf binary, it'll needlessly end up with an executable stack. Fix this by adding the appropriate linker note. Also add a global linker flag to prevent future regressions, as suggested by Jiri. This way perf won't get an executable stack even if we fail to add the .GNU-stack linker note to future assembler files. Though, doing so might create regressions the other way around, when (statically) linking against libraries needing an executable stack. But, apparently, regressing in that direction is wanted as it is an indicator of poor code quality -- or just missing linker notes. Fixes: 3c8b06f981 ("perf tests x86: Introduce perf_regs_load function") Signed-off-by: Mathias Krause <minipli@googlemail.com> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1398617466-22749-1-git-send-email-minipli@googlemail.com Signed-off-by: Jiri Olsa <jolsa@kernel.org>
| * | | perf tools: Remove extra '/' character in events file pathXia Kaixu2014-04-301-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The array debugfs_known_mountpoints[] will cause extra '/' character output. Remove it. pre: $ perf probe -l /sys/kernel/debug//tracing/uprobe_events file does not exist - please rebuild kernel with CONFIG_UPROBE_EVENTS. post: $ perf probe -l /sys/kernel/debug/tracing/uprobe_events file does not exist - please rebuild kernel with CONFIG_UPROBE_EVENTS. Signed-off-by: Xia Kaixu <xiakaixu@huawei.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/535B6660.2060001@huawei.com Signed-off-by: Jiri Olsa <jolsa@kernel.org>
| * | | perf machine: Search for modules in %s/lib/modules/%sRichard Yao2014-04-301-4/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Modules installed outside of the kernel's build system should go into "%s/lib/modules/%s/extra", but at present, perf will only look at them when they are in "%s/lib/modules/%s/kernel". Lets encourage good citizenship by relaxing this requirement to "%s/lib/modules/%s". This way open source modules that are out-of-tree have no incentive to start populating a directory reserved for in-kernel modules and I can stop hex-editing my system's perf binary when profiling OSS out-of-tree modules. Feedback from Namhyung Kim correctly revealed that the hex-edits that I had been doing meant that perf was also traversing the build and source symlinks in %s/lib/modules/%s. That is undesireable, so we explicitly exclude them from traversal with a minor tweak to the traversal routine. Signed-off-by: Richard Yao <ryao@gentoo.org> Acked-by: Namhyung kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/1398532675-13684-1-git-send-email-ryao@gentoo.org Signed-off-by: Jiri Olsa <jolsa@kernel.org>
| * | | perf tests: Add static build make testJiri Olsa2014-04-301-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adding test for building static perf build into the automated suite. Also available via following commands: $ make -f tests/make make_static - make_static: cd . && make -f Makefile DESTDIR=/tmp/tmp.7u5MlB4njo LDFLAGS=-static $ make -f tests/make make_static_O - make_static_O: cd . && make -f Makefile O=/tmp/tmp.Ay6r3wEmtX DESTDIR=/tmp/tmp.vK0KQwO0Vi LDFLAGS=-static Acked-by: David Ahern <dsahern@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1398760413-7574-1-git-send-email-jolsa@kernel.org Signed-off-by: Jiri Olsa <jolsa@kernel.org>
| * | | perf tools: Fix bfd dependency libraries detectionJiri Olsa2014-04-301-11/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There's false assumption in the library detection code assuming -liberty and -lz are always present once bfd is detected. The fails on Ubuntu (14.04) as reported by Ingo. Forcing the bdf dependency libraries detection any time bfd library is detected. Reported-by: Ingo Molnar <mingo@kernel.org> Tested-by: Ingo Molnar <mingo@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1398676935-6615-1-git-send-email-jolsa@kernel.org Signed-off-by: Jiri Olsa <jolsa@kernel.org>
| * | | perf tools: Use LDFLAGS instead of ALL_LDFLAGSJiri Olsa2014-04-301-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We no longer use ALL_LDFLAGS, Replacing with LDFLAGS. Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1398675770-3109-1-git-send-email-jolsa@kernel.org Signed-off-by: Jiri Olsa <jolsa@kernel.org>
| * | | Merge tag 'perf-urgent-for-mingo' of ↵Ingo Molnar2014-04-234-2/+12
| |\ \ \ | | |/ / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jolsa/perf into perf/urgent Pull perf/urgent fixes from Jiri Olsa: * Fix memory leak and backward compatibility macros for pevent filter enums in traceevent library (Steven Rostedt) * Disable libdw unwind for all but x86 arch (Jiri Olsa) * Fix memory leak in sample_ustack (Masanari Iida) Signed-off-by: Jiri Olsa <jolsa@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
| | * | tools lib traceevent: Fix memory leak in pretty_print()Steven Rostedt2014-04-231-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 12e55569a244 "tools lib traceevent: Use helper trace-seq in print functions like kernel does" added a extra trace_seq helper to process string arguments like the kernel does it. But the difference between the kernel and the userspace library is that the kernel's trace_seq structure has a static allocated buffer. The userspace one has a dynamically allocated one. It requires a trace_seq_destroy(), otherwise it produces a nasty memory leak. Cc: stable@vger.kernel.org # 3.14+ Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/20140422192330.6bb09bf8@gandalf.local.home Signed-off-by: Jiri Olsa <jolsa@redhat.com>
| | * | tools lib traceevent: Fix backward compatibility macros for pevent filter enumsSteven Rostedt2014-04-231-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The return value for pevent_filter_match() is suppose to return FILTER_NONE if the event doesn't have a filter, and FILTER_NOEXIST if there is no filter at all. But the change 41e12e580a7 "tools lib traceevent: Refactor pevent_filter_match() to get rid of die()" replaced the return value with PEVENT_ERRNO__* values and added "backward compatibility" macros that used the old names. Unfortunately, the NOEXIST and NONE macros were swapped, and this broke users that use the old return names. Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/20140421222346.0351ced4@gandalf.local.home Signed-off-by: Jiri Olsa <jolsa@redhat.com>
| | * | perf tools: Disable libdw unwind for all but x86 archJiri Olsa2014-04-231-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | So far there's only x86 libdw unwind support merged in perf. Disable it on all other architectures in case libdw unwind support is detected in system. Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jean Pihet <jean.pihet@linaro.org> Cc: Josh Boyer <jwboyer@fedoraproject.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1397988006-14158-1-git-send-email-jolsa@redhat.com Signed-off-by: Jiri Olsa <jolsa@redhat.com>
| | * | perf tests x86: Fix memory leak in sample_ustack()Masanari Iida2014-04-231-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The buf is not freed, when kernel failed to get stack map and return. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Link: http://lkml.kernel.org/r/1398091024-7901-1-git-send-email-standby24x7@gmail.com Signed-off-by: Jiri Olsa <jolsa@redhat.com>
* | | | tools/power/acpi: Minor bugfixesThomas Renninger2014-04-211-10/+1
|/ / / | | | | | | | | | | | | | | | | | | | | | | | | - bindir is created, but sbindir is used -> fix that - the debug parts are there twice (copy paste bug?). Remove one of the exact same parts Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* | | Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds2014-04-204-2/+12
|\| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf tooling fixes from Ingo Molnar: "Three small tooling fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf tools: Improve error reporting perf tools: Adjust symbols in VDSO perf kvm: Fix 'Min time' counting in report command
| * | perf tools: Improve error reportingAdrien BAK2014-04-202-2/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In the current version, when using perf record, if something goes wrong in tools/perf/builtin-record.c:375 session = perf_session__new(file, false, NULL); The error message: "Not enough memory for reading per file header" is issued. This error message seems to be outdated and is not very helpful. This patch proposes to replace this error message by "Perf session creation failed" I believe this issue has been brought to lkml: https://lkml.org/lkml/2014/2/24/458 although this patch only tackles a (small) part of the issue. Additionnaly, this patch improves error reporting in tools/perf/util/data.c open_file_write. Currently, if the call to open fails, the user is unaware of it. This patch logs the error, before returning the error code to the caller. Reported-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Adrien BAK <adrien.bak@metascale.org> Link: http://lkml.kernel.org/r/1397786443.3093.4.camel@beast [ Reorganize the changelog into paragraphs ] [ Added empty line after fd declaration in open_file_write ] Signed-off-by: Jiri Olsa <jolsa@redhat.com>
| * | perf tools: Adjust symbols in VDSOVladimir Nikulichev2014-04-201-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | pert-report doesn't resolve function names in VDSO: $ perf report --stdio -g flat,0.0,15,callee --sort pid ... 8.76% 0x7fff6b1fe861 __gettimeofday ACE_OS::gettimeofday() ... In this case symbol values should be adjusted the same way as for executables, relocatable objects and prelinked libraries. After fix: $ perf report --stdio -g flat,0.0,15,callee --sort pid ... 8.76% __vdso_gettimeofday __gettimeofday ACE_OS::gettimeofday() Signed-off-by: Vladimir Nikulichev <nvs@tbricks.com> Tested-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: Adrian Hunter <adrian.hunter@intel.com> Link: http://lkml.kernel.org/r/969812.163009436-sendEmail@nvs Signed-off-by: Jiri Olsa <jolsa@redhat.com>
| * | perf kvm: Fix 'Min time' counting in report commandAlexander Yarygin2014-04-201-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Every event in the perf-kvm has a 'stats' structure, which contains max/min/average/etc times of handling this event. The problem is that the 'perf-kvm stat report' command always shows that 'min time' is 0us for every event. Example: # perf kvm stat report Analyze events for all VCPUs: VM-EXIT Samples Samples% Time% Min Time Max Time Avg time [..] 0xB2 MSCH 12 0.07% 0.00% 0us 8us 7.31us ( +- 2.11% ) 0xB2 CHSC 12 0.07% 0.00% 0us 18us 9.39us ( +- 9.49% ) 0xB2 STPX 8 0.05% 0.00% 0us 2us 1.88us ( +- 7.18% ) 0xB2 STSI 7 0.04% 0.00% 0us 44us 16.49us ( +- 38.20% ) [..] This happens because the 'stats' structure is not initialized and stats->min equals to 0. Lets initialize the structure for every event after its allocation using init_stats() function. This initializes stats->min to -1 and makes 'Min time' statistics counting work: # perf kvm stat report Analyze events for all VCPUs: VM-EXIT Samples Samples% Time% Min Time Max Time Avg time [..] 0xB2 MSCH 12 0.07% 0.00% 6us 8us 7.31us ( +- 2.11% ) 0xB2 CHSC 12 0.07% 0.00% 7us 18us 9.39us ( +- 9.49% ) 0xB2 STPX 8 0.05% 0.00% 1us 2us 1.88us ( +- 7.18% ) 0xB2 STSI 7 0.04% 0.00% 1us 44us 16.49us ( +- 38.20% ) [..] Signed-off-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: David Ahern <dsahern@gmail.com> Link: http://lkml.kernel.org/r/1397053319-2130-3-git-send-email-borntraeger@de.ibm.com [ Fixing the perf examples changelog output ] Signed-off-by: Jiri Olsa <jolsa@redhat.com>
* | | Merge tag 'char-misc-3.15-rc2' of ↵Linus Torvalds2014-04-181-1/+3
|\ \ \ | |/ / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here are a few driver fixes for char/misc drivers that resolve reported issues. All have been in linux-next successfully for a few days" * tag 'char-misc-3.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: Drivers: hv: vmbus: Negotiate version 3.0 when running on ws2012r2 hosts Tools: hv: Handle the case when the target file exists correctly vme_tsi148: Utilize to_pci_dev() macro vme_tsi148: Fix PCI address mapping assumption vme_tsi148: Fix typo in tsi148_slave_get() w1: avoid recursive device_add w1: fix netlink refcnt leak on error path misc: Grammar s/addition/additional/ drivers: mcb: fix memory leak in chameleon_parse_cells() error path mei: ignore client writing state during cb completion mei: me: do not load the driver if the FW doesn't support MEI interface GenWQE: Increase driver version number GenWQE: Fix multithreading problems GenWQE: Ensure rc is not returning an uninitialized value GenWQE: Add wmb before DDCB is started GenWQE: Enable access to VPD flash area
| * | Tools: hv: Handle the case when the target file exists correctlyK. Y. Srinivasan2014-04-161-1/+3
| |/ | | | | | | | | | | | | | | | | Return the appropriate error code and handle the case when the target file exists correctly. This fixes a bug. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Cc: <stable@vger.kernel.org> [3.14] Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds2014-04-169-57/+117
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Tooling fixes, plus a simple hardware-enablement patch for the Intel RAPL PMU (energy use measurement) on Haswell CPUs, which I hope is still fine at this stage" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf tools: Instead of redirecting flex output, use -o perf tools: Fix double free in perf test 21 (code-reading.c) perf stat: Initialize statistics correctly perf bench: Set more defaults in the 'numa' suite perf bench: Fix segfault at the end of an 'all' execution perf bench: Update manpage to mention numa and futex perf probe: Use dwarf_getcfi_elf() instead of dwarf_getcfi() perf probe: Fix to handle errors in line_range searching perf probe: Fix --line option behavior perf tools: Pick up libdw without explicit LIBDW_DIR MAINTAINERS: Change e-mail to kernel.org one perf callchains: Disable unwind libraries when libelf isn't found tools lib traceevent: Do not call warning() directly tools lib traceevent: Print event name when show warning if possible perf top: Fix documentation of invalid -s option perf/x86: Enable DRAM RAPL support on Intel Haswell
| * | perf tools: Instead of redirecting flex output, use -oCody P Schafer2014-04-151-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | This gives us a real filename instead of having '<stdout>' show up all over the place when debugging. Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1396652539-2416-1-git-send-email-cody@linux.vnet.ibm.com Signed-off-by: Jiri Olsa <jolsa@redhat.com>
| * | perf tools: Fix double free in perf test 21 (code-reading.c)Adrian Hunter2014-04-151-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | perf_evlist__delete() deletes attached cpu and thread maps but the test is still using them, so remove them from the evlist before deleting it. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Link: http://lkml.kernel.org/r/53465E3E.8070201@intel.com Signed-off-by: Jiri Olsa <jolsa@redhat.com>
| * | Merge branch 'perf-core-for-mingo' into perf/urgentIngo Molnar2014-04-147-55/+114
| |\ \ | | |/ | |/| | | | | | | | | | | | | | | | | | | Conflicts: tools/perf/bench/numa.c Pull perf fixes from Jiri Olsa. Signed-off-by: Ingo Molnar <mingo@kernel.org>
| | * perf stat: Initialize statistics correctlyAndi Kleen2014-04-141-2/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | perf stat did initialize the stats structure used to compute stddev etc. incorrectly. It merely zeroes it. But one member (min) needs to be set to a non zero value. This causes min to be not computed at all. Call init_stats() correctly. It doesn't matter for stat currently because it doesn't use min, but it's still better to do it correctly. The other users of statistics are already correct. Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/1395768699-16060-1-git-send-email-andi@firstfloor.org Signed-off-by: Jiri Olsa <jolsa@redhat.com>
| | * perf bench: Set more defaults in the 'numa' suiteRamkumar Ramachandra2014-04-141-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, $ perf bench numa mem errors out with usage information. To make this more user-friendly, let us provide a minimum set of default values required for a test run. As an added bonus, $ perf bench all now goes all the way to completion. Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1395964219-22173-2-git-send-email-artagnon@gmail.com Signed-off-by: Jiri Olsa <jolsa@redhat.com>
| | * perf bench: Fix segfault at the end of an 'all' executionRamkumar Ramachandra2014-04-141-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | At the end of $ perf bench all the program segfaults because it attempts to dereference a NULL pointer. Fix this fault. Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1395964219-22173-4-git-send-email-artagnon@gmail.com Signed-off-by: Jiri Olsa <jolsa@redhat.com>
| | * perf bench: Update manpage to mention numa and futexRamkumar Ramachandra2014-04-141-0/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1395964219-22173-3-git-send-email-artagnon@gmail.com Signed-off-by: Jiri Olsa <jolsa@redhat.com>
| | * perf probe: Use dwarf_getcfi_elf() instead of dwarf_getcfi()Namhyung Kim2014-04-141-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The dwarf_getcfi() only checks .debug_frame section for CFI, but as most binaries only have .eh_frame it'd return NULL and it makes some variables inaccessible. Using dwarf_getcfi_elf (along with dwarf_getelf()) allows to show and add probe to more variables. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/1396854348-9296-1-git-send-email-namhyung@kernel.org Signed-off-by: Jiri Olsa <jolsa@redhat.com>
| | * perf probe: Fix to handle errors in line_range searchingMasami Hiramatsu2014-04-141-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As Namhyung reported(https://lkml.org/lkml/2014/4/1/89), current perf-probe -L option doesn't handle errors in line-range searching correctly. It causes a SEGV if an error occured in the line-range searching. ---- $ perf probe -x ./perf -v -L map__load Open Debuginfo file: /home/namhyung/project/linux/tools/perf/perf fname: util/map.c, lineno:153 New line range: 153 to 2147483647 path: (null) Segmentation fault (core dumped) ---- This is because line_range_inline_cb() ignores errors from find_line_range_by_line() which means that lr->path is already freed on the error path in find_line_range_by_line(). As a result, get_real_path() accesses the lr->path and it causes a NULL pointer exception. This fixes line_range_inline_cb() to handle the error correctly, and report it to the caller. Anyway, this just fixes a possible SEGV bug, Namhyung's patch is also required. Reported-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20140402054831.19080.27006.stgit@ltc230.yrl.intra.hitachi.co.jp Signed-off-by: Jiri Olsa <jolsa@redhat.com>
| | * perf probe: Fix --line option behaviorNamhyung Kim2014-04-141-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The commit 5a62257a3ddd1 ("perf probe: Replace line_list with intlist") replaced line_list to intlist but it has a problem that if a same line was added again, it'd return -EEXIST rather than 1. Since line_range_walk_cb() only checks the result being negative, it resulted in failure or segfault sometimes. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/1396327677-3657-1-git-send-email-namhyung@kernel.org Signed-off-by: Jiri Olsa <jolsa@redhat.com>
| | * perf tools: Pick up libdw without explicit LIBDW_DIRRamkumar Ramachandra2014-04-141-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Makefile logic sets FEATURE_CHECKS_CFLAGS-libdw-dwarf-unwind and FEATURE_CHECKS_LDFLAGS-libdw-dwarf-unwind only if LIBDW_DIR is defined. This means that under a normal setup, $ make NO_LIBUNWIND=1 won't automatically pick up libdw. Fix this. Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Acked-by: Jean Pihet <jean.pihet@linaro.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1395873845-466-1-git-send-email-artagnon@gmail.com Signed-off-by: Jiri Olsa <jolsa@redhat.com>
| | * perf callchains: Disable unwind libraries when libelf isn't foundArnaldo Carvalho de Melo2014-04-141-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I.e. do the same as when NO_LIBELF is explicitely passed in the 'make' command line, fixing this: Auto-detecting system features: ... dwarf: [ OFF ] ... glibc: [ on ] ... gtk2: [ OFF ] ... libaudit: [ OFF ] ... libbfd: [ OFF ] ... libelf: [ OFF ] ... libunwind: [ OFF ] ... libdw-dwarf-unwind: [ OFF ] ... DWARF post unwind library: libdw <SNIP> CC /tmp/build/perf/util/symbol-minimal.o CC /tmp/build/perf/util/unwind-libdw.o arch/x86/util/unwind-libdw.c:1:30: fatal error: elfutils/libdwfl.h: No such file or directory compilation terminated. CC /tmp/build/perf/tests/keep-tracking.o util/unwind-libdw.c:2:28: fatal error: elfutils/libdw.h: No such file or directory compilation terminated. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-e39j1yxanltjx4t0msse63ax@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Jiri Olsa <jolsa@redhat.com>
| | * tools lib traceevent: Do not call warning() directlyNamhyung Kim2014-04-141-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The patch 3a3ffa2e82205 ("tools lib traceevent: Report better error message on bad function args") added the error message but it seems there's no reason to call warning() directly. So change it to do_warning_event() to provide event information too. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1395192174-26273-2-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Jiri Olsa <jolsa@redhat.com>
| | * tools lib traceevent: Print event name when show warning if possibleNamhyung Kim2014-04-141-41/+62
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It's sometimes useful to know where the parse failure was occurred. Add do_warning_event() macro to see the failing event. It now shows the messages like below: $ perf test 5 5: parse events tests : Warning: [kvmmmu:kvm_mmu_get_page] bad op token { Warning: [kvmmmu:kvm_mmu_sync_page] bad op token { Warning: [kvmmmu:kvm_mmu_unsync_page] bad op token { Warning: [kvmmmu:kvm_mmu_prepare_zap_page] bad op token { Warning: [kvmmmu:fast_page_fault] function is_writable_pte not defined Warning: [xen:xen_mmu_ptep_modify_prot_commit] function sizeof not defined Warning: [xen:xen_mmu_ptep_modify_prot_start] function sizeof not defined Warning: [xen:xen_mmu_set_pgd] function sizeof not defined Warning: [xen:xen_mmu_set_pud] function sizeof not defined Warning: [xen:xen_mmu_set_pmd] function sizeof not defined ... Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Ramkumar Ramachandra <artagnon@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1395192174-26273-1-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Jiri Olsa <jolsa@redhat.com>
| | * perf top: Fix documentation of invalid -s optionNamhyung Kim2014-04-141-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On perf top, the -s option is used for --sort, but the man page contains invalid documentation of -s option for --sym-annotate. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1395193578-27098-1-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Jiri Olsa <jolsa@redhat.com>
* | | Merge branch 'core-urgent-for-linus' of ↵Linus Torvalds2014-04-162-11/+7
|\ \ \ | |/ / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fixes from Ingo Molnar: "liblockdep fixes and mutex debugging fixes" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/mutex: Fix debug_mutexes tools/liblockdep: Add proper versioning to the shared obj tools/liblockdep: Ignore asmlinkage and visible
| * | Merge branch 'liblockdep-fixes' of ↵Ingo Molnar2014-04-142-11/+7
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/sashal/linux into core/urgent Pull liblockdep fixes from Sasha Levin: " 1. There was a build breakage caused by marking a function 'asmlinkage' in lockdep.h. Fix that by ignoring asmlinkage and visible annotations. 2. Josh Boyer mentioned that Fedora would like to include liblockdep as a package, so we had to fix our versioning methods from being dumb and pointless to something actually usable. So now liblockdep.so tracks the kernel version which makes lives of distro folks much easier. " Signed-off-by: Ingo Molnar <mingo@kernel.org>
| | * | tools/liblockdep: Add proper versioning to the shared objSasha Levin2014-04-011-11/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add proper versioning to the shared obj so that distros would be able to ship this lib without having to worry about versioning. Suggested-by: Josh Boyer <jwboyer@fedoraproject.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
| | * | tools/liblockdep: Ignore asmlinkage and visibleSasha Levin2014-04-011-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 63f9a7fde7 "asmlinkage: Make lockdep_sys_exit asmlinkage" has added asmlinkage annotation to lockdep_sys_exit, which broke build of liblockdep. Since we don't need asmlinkage in liblockep, just ignore it. Reported-by: Eunbong Song <eunb.song@samsung.com> Reported-by: Robin Hack <rhack@redhat.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
* | | | Merge tag 'pm+acpi-3.15-rc1-3' of ↵Linus Torvalds2014-04-112-206/+161
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more ACPI and power management fixes and updates from Rafael Wysocki: "This is PM and ACPI material that has emerged over the last two weeks and one fix for a CPU hotplug regression introduced by the recent CPU hotplug notifiers registration series. Included are intel_idle and turbostat updates from Len Brown (these have been in linux-next for quite some time), a new cpufreq driver for powernv (that might spend some more time in linux-next, but BenH was asking me so nicely to push it for 3.15 that I couldn't resist), some cpufreq fixes and cleanups (including fixes for some silly breakage in a couple of cpufreq drivers introduced during the 3.14 cycle), assorted ACPI cleanups, wakeup framework documentation fixes, a new sysfs attribute for cpuidle and a new command line argument for power domains diagnostics. Specifics: - Fix for a recently introduced CPU hotplug regression in ARM KVM from Ming Lei. - Fixes for breakage in the at32ap, loongson2_cpufreq, and unicore32 cpufreq drivers introduced during the 3.14 cycle (-stable material) from Chen Gang and Viresh Kumar. - New powernv cpufreq driver from Vaidyanathan Srinivasan, with bits from Gautham R Shenoy and Srivatsa S Bhat. - Exynos cpufreq driver fix preventing it from being included into multiplatform builds that aren't supported by it from Sachin Kamat. - cpufreq cleanups related to the usage of the driver_data field in struct cpufreq_frequency_table from Viresh Kumar. - cpufreq ppc driver cleanup from Sachin Kamat. - Intel BayTrail support for intel_idle and ACPI idle from Len Brown. - Intel CPU model 54 (Atom N2000 series) support for intel_idle from Jan Kiszka. - intel_idle fix for Intel Ivy Town residency targets from Len Brown. - turbostat updates (Intel Broadwell support and output cleanups) from Len Brown. - New cpuidle sysfs attribute for exporting C-states' target residency information to user space from Daniel Lezcano. - New kernel command line argument to prevent power domains enabled by the bootloader from being turned off even if they are not in use (for diagnostics purposes) from Tushar Behera. - Fixes for wakeup sysfs attributes documentation from Geert Uytterhoeven. - New ACPI video blacklist entry for ThinkPad Helix from Stephen Chandler Paul. - Assorted ACPI cleanups and a Kconfig help update from Jonghwan Choi, Zhihui Zhang, Hanjun Guo" * tag 'pm+acpi-3.15-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (28 commits) ACPI: Update the ACPI spec information in Kconfig arm, kvm: fix double lock on cpu_add_remove_lock cpuidle: sysfs: Export target residency information cpufreq: ppc: Remove duplicate inclusion of fsl_soc.h cpufreq: create another field .flags in cpufreq_frequency_table cpufreq: use kzalloc() to allocate memory for cpufreq_frequency_table cpufreq: don't print value of .driver_data from core cpufreq: ia64: don't set .driver_data to index cpufreq: powernv: Select CPUFreq related Kconfig options for powernv cpufreq: powernv: Use cpufreq_frequency_table.driver_data to store pstate ids cpufreq: powernv: cpufreq driver for powernv platform cpufreq: at32ap: don't declare local variable as static cpufreq: loongson2_cpufreq: don't declare local variable as static cpufreq: unicore32: fix typo issue for 'clk' cpufreq: exynos: Disable on multiplatform build PM / wakeup: Correct presence vs. emptiness of wakeup_* attributes PM / domains: Add pd_ignore_unused to keep power domains enabled ACPI / dock: Drop dock_device_ids[] table ACPI / video: Favor native backlight interface for ThinkPad Helix ACPI / thermal: Fix wrong variable usage in debug statement ...
generated by cgit v1.2.3 (git 2.25.1) at 2025-02-12 03:22:07 +0000