aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* powerpc: uname should return ppc64le/ppcle on little endian buildsAnton Blanchard2013-10-111-2/+11
| | | | | | | | We need to distinguish between big endian and little endian environments, so fix uname to return the right thing. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc: Use generic memcpy code in little endianAnton Blanchard2013-10-113-3/+12
| | | | | | | | We need to fix some endian issues in our memcpy code. For now just enable the generic memcpy routine for little endian builds. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc: Use generic checksum code in little endianAnton Blanchard2013-10-114-2/+17
| | | | | | | | We need to fix some endian issues in our checksum code. For now just enable the generic checksum routines for little endian builds. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc: Handle VSX alignment faults in little endian modeAnton Blanchard2013-10-111-8/+33
| | | | | | | | | Things are complicated by the fact that VSX elements are big endian ordered even in little endian mode. 8 byte loads and stores also write to the top 8 bytes of the register. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc: Add little endian support to alignment handlerAnton Blanchard2013-10-111-30/+63
| | | | | | | | Handle most unaligned load and store faults in little endian mode. Strings, multiples and VSX are not supported. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc: Alignment handler shouldn't access VSX registers with TS_FPRAnton Blanchard2013-10-111-1/+1
| | | | | | | | | | | | The TS_FPR macro selects the FPR component of a VSX register (the high doubleword). emulate_vsx is using this macro to get the address of the associated VSX register. This happens to work on big endian, but fails on little endian. Replace it with an explicit array access. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc: Remove hard coded FP offsets in alignment handlerAnton Blanchard2013-10-111-2/+2
| | | | | | | | | The alignment handler assumes big endian ordering when selecting the low word of a 64bit floating point value. Use the existing union which works in both little and big endian. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc: Remove open coded byte swap macro in alignment handlerAnton Blanchard2013-10-111-24/+12
| | | | | | | Use swab64/32/16 instead of open coding it. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc: Endian safe trampolineBenjamin Herrenschmidt2013-10-113-17/+53
| | | | | | | | | | | | Create a trampoline that works in either endian and flips to the expected endian. Use it for primary and secondary thread entry as well as RTAS and OF call return. Credit for finding the magic instruction goes to Paul Mackerras Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc: Include the appropriate endianness headerIan Munsie2013-10-111-0/+4
| | | | | | | | | This patch will have powerpc include the appropriate generic endianness header depending on what the compiler reports. Signed-off-by: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc: Reset MSR_LE on signal entryAnton Blanchard2013-10-112-2/+4
| | | | | | | | We always take signals in big endian which is wrong. Signals should be taken in native endian. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc: Set MSR_LE bit on little endian buildsAnton Blanchard2013-10-111-1/+6
| | | | | | | We need to set MSR_LE in kernel and userspace for little endian builds Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc: Add little endian support for word-at-a-time functionsAnton Blanchard2013-10-111-0/+71
| | | | | | | | The powerpc word-at-a-time functions are big endian specific. Bring in the x86 version in order to support little endian builds. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc: Support endian agnostic MMIOIan Munsie2013-10-111-18/+49
| | | | | | | | | | | | | | | | | | | | | | This patch maps the MMIO functions for 32bit PowerPC to their appropriate instructions depending on CPU endianness. The macros used to create the corresponding inline functions are also renamed by this patch. Previously they had BE or LE in their names which was misleading - they had nothing to do with endianness, but actually created different instruction forms so their new names reflect the instruction form they are creating (D-Form and X-Form). Little endian 64bit PowerPC is not supported, so the lack of mappings (and corresponding breakage) for that case is intentional to bring the attention of anyone doing a 64bit little endian port. 64bit big endian is unaffected. [ Added 64 bit versions - Anton ] Signed-off-by: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc: Little endian builds double word swap VSX state during context ↵Anton Blanchard2013-10-112-4/+20
| | | | | | | | | | | | | | | save/restore The elements within VSX loads and stores are big endian ordered regardless of endianness. Our VSX context save/restore code uses lxvd2x and stxvd2x which is a 2x doubleword operation. This means the two doublewords will be swapped and we have to perform another swap to undo it. We need to do this on save and restore. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc: PTRACE_PEEKUSR/PTRACE_POKEUSER of FPR registers in little endian buildsAnton Blanchard2013-10-111-4/+4
| | | | | | | | | | | FPRs overlap the high 64bits of the first 32 VSX registers. The ptrace FP read/write code assumes big endian ordering and grabs the lowest 64 bits. Fix this by using the TS_FPR macro which does the right thing. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc: Fix offset of FPRs in VSX registers in little endian buildsAnton Blanchard2013-10-111-2/+10
| | | | | | | | | | | | The FPRs overlap the high doublewords of the first 32 VSX registers. Fix TS_FPROFFSET and TS_VSRLOWOFFSET so we access the correct fields in little endian mode. If VSX is disabled the FPRs are only one doubleword in length so TS_FPROFFSET needs adjusting in little endian. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc: Book 3S MMU little endian supportAnton Blanchard2013-10-113-42/+46
| | | | | Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc: Fix endian issues in VMX copy loopsAnton Blanchard2013-10-112-46/+63
| | | | | | | Fix the permute loops for little endian. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc/irq: Don't switch to irq stack from softirq stackBenjamin Herrenschmidt2013-10-071-2/+3
| | | | | | | | | | | | | | | | irq_exit() is now called on the irq stack, which can trigger a switch to the softirq stack from the irq stack. If an interrupt happens at that point, we will not properly detect the re-entrancy and clobber the original return context on the irq stack. This fixes it. The side effect is to prevent all nesting from softirq stack to irq stack even in the "safe" case but it's simpler that way and matches what x86_64 does. Reported-by: Cédric Le Goater <clg@fr.ibm.com> Tested-by: Cédric Le Goater <clg@fr.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge branch 'for-linus' of ↵Linus Torvalds2013-10-0713-27/+63
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID fixes from Jiri Kosina: - fix for hidraw reference counting regression, by Manoj Chourasia - fix for minor number allocation for uhid, by David Herrmann - other small unsorted fixes / device ID additions * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: wiimote: fix FF deadlock HID: add Holtek USB ID 04d9:a081 SHARKOON DarkGlider HID: hidraw: close underlying device at removal of last reader HID: roccat: Fix "cannot create duplicate filename" problems HID: uhid: allocate static minor
| * HID: wiimote: fix FF deadlockDavid Herrmann2013-10-072-12/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The input core has an internal spinlock that is acquired during event injection via input_event() and friends but also held during FF callbacks. That means, there is no way to share a lock between event-injection and FF handling. Unfortunately, this is what is required for wiimote state tracking and what we do with state.lock and input->lock. This deadlock can be triggered when using continuous data reporting and FF on a wiimote device at the same time. I takes me at least 30m of stress-testing to trigger it but users reported considerably shorter times (http://bpaste.net/show/132504/) when using some gaming-console emulators. The real problem is that we have two copies of internal state, one in the wiimote objects and the other in the input device. As the input-lock is not supposed to be accessed from outside of input-core, we have no other chance than offloading FF handling into a worker. This actually works pretty nice and also allows to implictly merge fast rumble changes into a single request. Due to the 3-layered workers (rumble+queue+l2cap) this might reduce FF responsiveness. Initial tests were fine so lets fix the race first and if it turns out to be too slow we can always handle FF out-of-band and skip the queue-worker. Cc: <stable@vger.kernel.org> # 3.11+ Reported-by: Thomas Schneider Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| * HID: add Holtek USB ID 04d9:a081 SHARKOON DarkGliderAnders F. U. Kiær2013-10-024-0/+7
| | | | | | | | | | | | | | | | | | | | | | Added id, bindings and comments for Holtek USB ID 04d9:a081 SHARKOON DarkGlider Gaming mouse to use the same corrections of the report descriptor as Holtek 04d9:a04a. As the mouse exceed HID_MAX_USAGES at the same offsets in the reported descriptor. Tested on the hardware. Signed-off-by: Anders F. U. Kiær <ablacksheep@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| * HID: hidraw: close underlying device at removal of last readerManoj Chourasia2013-10-021-7/+14
| | | | | | | | | | | | | | | | | | | | | | Even though device exist bit is set the underlying HW device should be closed when the last reader of the device is closed i.e. open count drops to zero. Signed-off-by: Manoj Chourasia <mchourasia@nvidia.com> Reported-by: mika.westerberg@linux.intel.com Tested-by: mika.westerberg@linux.intel.com Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| * HID: roccat: Fix "cannot create duplicate filename" problemsStefan Achatz2013-09-304-7/+7
| | | | | | | | | | | | | | | | Fixing some wrong macro stringification/concatenation. Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| * HID: uhid: allocate static minorDavid Herrmann2013-09-262-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | udev has this nice feature of creating "dead" /dev/<node> device-nodes if it finds a devnode:<node> modalias. Once the node is accessed, the kernel automatically loads the module that provides the node. However, this requires udev to know the major:minor code to use for the node. This feature was introduced by: commit 578454ff7eab61d13a26b568f99a89a2c9edc881 Author: Kay Sievers <kay.sievers@vrfy.org> Date: Thu May 20 18:07:20 2010 +0200 driver core: add devname module aliases to allow module on-demand auto-loading However, uhid uses dynamic minor numbers so this doesn't actually work. We need to load uhid to know which minor it's going to use. Hence, allocate a static minor (just like uinput does) and we're good to go. Reported-by: Tom Gundersen <teg@jklm.no> Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | Merge branch 'stable' of ↵Linus Torvalds2013-10-079-42/+84
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile Pull Tile bugfixes from Chris Metcalf: "This fixes some serious issues with PREEMPT support, and a couple of smaller corner-case issues fixed in the last couple of weeks" * 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: arch: tile: re-use kbasename() helper tile: use a more conservative __my_cpu_offset in CONFIG_PREEMPT tile: ensure interrupts disabled for preempt_schedule_irq() tile: change lock initalization in hardwall tile: include: asm: use 'long long' instead of 'u64' for atomic64_t and its related functions
| * | arch: tile: re-use kbasename() helperAndy Shevchenko2013-09-301-7/+5
| | | | | | | | | | | | | | | | | | kbasename() returns the filename part of a pathname. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
| * | tile: use a more conservative __my_cpu_offset in CONFIG_PREEMPTChris Metcalf2013-09-301-3/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It turns out the kernel relies on barrier() to force a reload of the percpu offset value. Since we can't easily modify the definition of barrier() to include "tp" as an output register, we instead provide a definition of __my_cpu_offset as extended assembly that includes a fake stack read to hazard against barrier(), forcing gcc to know that it must reread "tp" and recompute anything based on "tp" after a barrier. This fixes observed hangs in the slub allocator when we are looping on a percpu cmpxchg_double. A similar fix for ARMv7 was made in June in change 509eb76ebf97. Cc: stable@vger.kernel.org Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
| * | tile: ensure interrupts disabled for preempt_schedule_irq()Chris Metcalf2013-09-272-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | When coming from a page fault (for example), interrupts might be enabled as we enter the code to return from interrupt. Cc: stable@vger.kernel.org Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
| * | tile: change lock initalization in hardwallHenrik Austad2013-09-271-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | hardwall used __SPIN_LOCK_INITIALIZER directly instead of the preferred __SPIN_LOCK_UNLOCKED. This also has the benefit that it will compile when applying the preempt-rt patch series. Signed-off-by: Henrik Austad <haustad@cisco.com> Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
| * | tile: include: asm: use 'long long' instead of 'u64' for atomic64_t and its ↵Chen Gang2013-09-274-29/+39
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | related functions atomic* value is signed value, and atomic* functions need also process signed value (parameter value, and return value), so use 'long long' instead of 'u64'. After replacement, it will also fix a bug for atomic64_add_negative(): "u64 is never less than 0". The modifications are: in vim, use "1,% s/\<u64\>/long long/g" command. remove redundant '__aligned(8)'. be sure of 80 (and macro '\') columns limitation after replacement. Signed-off-by: Chen Gang <gang.chen@asianux.com> Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> [re-instated const cast]
* | | Merge branch 'for-linus' of ↵Linus Torvalds2013-10-076-27/+33
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Martin Schwidefsky: "A couple of bux fixes, notable are the regression with ptrace vs restarting system calls and the patch for kdump to be able to copy from virtual memory" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390: fix system call restart after inferior call s390: Allow vmalloc target buffers for copy_from_oldmem() s390/sclp: properly detect line mode console s390/kprobes: add exrl to list of prohibited opcodes s390/3270: fix return value check in tty3270_resize_work()
| * | | s390: fix system call restart after inferior callMartin Schwidefsky2013-09-302-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Git commit 616498813b11ffef "s390: system call path micro optimization" introduced a regression in regard to system call restarting and inferior function calls via the ptrace interface. The pointer to the system call table needs to be loaded in sysc_sigpending if do_signal returns with TIF_SYSCALl set after it restored a system call context. Cc: stable@vger.kernel.org # 3.10+ Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * | | s390: Allow vmalloc target buffers for copy_from_oldmem()Michael Holzheu2013-09-301-22/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently copy_from_oldmem() is not able to copy to virtual memory. When using kexec pre-allocated ELF header, copy_from_oldmem() is used to copy the ELF notes information to vmalloc buffers. So fix this and use the new function copy_from_realmem() that allows copying also to vmalloc memory. Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * | | s390/sclp: properly detect line mode consoleChristian Borntraeger2013-09-301-3/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To detect a line mode console we need a message event type for the receive mask and a command event type for the send mask. Checking for a MSG event in the sclp send mask was wrong and might result in line mode consoles not being detected. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * | | s390/kprobes: add exrl to list of prohibited opcodesHeiko Carstens2013-09-301-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | "execute relative long" may have all sorts of side effects dependend on the instructions it executes. Therefore prohibit setting a kprobe on exrl just like we do for the regular execute instruction. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * | | s390/3270: fix return value check in tty3270_resize_work()Wei Yongjun2013-09-301-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In case of error, the function tty3270_alloc_screen() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | | | Linux 3.12-rc4v3.12-rc4Linus Torvalds2013-10-061-1/+1
| | | |
* | | | net: Update the sysctl permissions handler to test effective uid/gidEric W. Biederman2013-10-061-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Modify the code to use current_euid(), and in_egroup_p, as in done in fs/proc/proc_sysctl.c:test_perm() Cc: stable@vger.kernel.org Reviewed-by: Eric Sandeen <sandeen@redhat.com> Reported-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds2013-10-068-25/+67
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull SCSI target fixes from Nicholas Bellinger: "Here are the outstanding target fixes queued up for v3.12-rc4 code. The highlights include: - Make vhost/scsi tag percpu_ida_alloc() use GFP_ATOMIC - Allow sess_cmd_map allocation failure fallback to use vzalloc - Fix COMPARE_AND_WRITE se_cmd->data_length bug with FILEIO backends - Fixes for COMPARE_AND_WRITE callback recursive failure OOPs + non zero scsi_status bug - Make iscsi-target do acknowledgement tag release from RX context - Setup iscsi-target with extra (cmdsn_depth / 2) percpu_ida tags Also included is a iscsi-target patch CC'ed for v3.10+ that avoids legacy wait_for_task=true release during fast-past StatSN acknowledgement, and two other SRP target related patches that address long-standing issues that are CC'ed for v3.3+. Extra thanks to Thomas Glanzmann for his testing feedback with COMPARE_AND_WRITE + EXTENDED_COPY VAAI logic" * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: iscsi-target; Allow an extra tag_num / 2 number of percpu_ida tags iscsi-target: Perform release of acknowledged tags from RX context iscsi-target: Only perform wait_for_tasks when performing shutdown target: Fail on non zero scsi_status in compare_and_write_callback target: Fix recursive COMPARE_AND_WRITE callback failure target: Reset data_length for COMPARE_AND_WRITE to NoLB * block_size ib_srpt: always set response for task management target: Fall back to vzalloc upon ->sess_cmd_map kzalloc failure vhost/scsi: Use GFP_ATOMIC with percpu_ida_alloc for obtaining tag ib_srpt: Destroy cm_id before destroying QP. target: Fix xop->dbl assignment in target_xcopy_parse_segdesc_02
| * | | | iscsi-target; Allow an extra tag_num / 2 number of percpu_ida tagsNicholas Bellinger2013-10-031-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch bumps the default number of tags allocated per session by iscsi-target via transport_alloc_session_tags() -> percpu_ida_init() by another (tag_num / 2). This is done to take into account the tags waiting to be acknowledged and released in iscsit_ack_from_expstatsn(), but who's number are not directly limited by the CmdSN Window queue_depth being enforced by the target. Using a larger value here is also useful to prevent percpu_ida_alloc() from having to steal tags from other CPUs when no tags are available on the local CPU, while waiting for unacknowledged tags to be released. Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
| * | | | iscsi-target: Perform release of acknowledged tags from RX contextNicholas Bellinger2013-10-031-4/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch converts iscsit_ack_from_expstatsn() to populate a local ack_list of commands, and call iscsit_free_cmd() directly from RX thread context, instead of using iscsit_add_cmd_to_immediate_queue() to queue the acknowledged commands to be released from TX thread context. It is helpful to release the acknowledge commands as quickly as possible, along with the associated percpu_ida tags, in order to prevent percpu_ida_alloc() from having to steal tags from other CPUs while waiting for iscsit_free_cmd() to happen from TX thread context. Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
| * | | | iscsi-target: Only perform wait_for_tasks when performing shutdownNicholas Bellinger2013-10-031-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch changes transport_generic_free_cmd() to only wait_for_tasks when shutdown=true is passed to iscsit_free_cmd(). With the advent of >= v3.10 iscsi-target code using se_cmd->cmd_kref, the extra wait_for_tasks with shutdown=false is unnecessary, and may end up causing an extra context switch when releasing WRITEs. Cc: stable@vger.kernel.org # 3.10+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
| * | | | target: Fail on non zero scsi_status in compare_and_write_callbackNicholas Bellinger2013-10-031-1/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch addresses a bug for backends such as IBLOCK that perform asynchronous completion via transport_complete_cmd(), that will call target_complete_failure_work() -> transport_generic_request_failure(), upon exception status and invoke cmd->transport_complete_callback() -> compare_and_write_callback() incorrectly during the failure case. It adds a check for a non zero se_cmd->scsi_status within the first invocation of compare_and_write_callback(), and will jump to out plus up se_device->caw_sem before exiting the callback. Reported-by: Thomas Glanzmann <thomas@glanzmann.de> Tested-by: Thomas Glanzmann <thomas@glanzmann.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
| * | | | target: Fix recursive COMPARE_AND_WRITE callback failureNicholas Bellinger2013-10-031-1/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch addresses a bug when compare_and_write_callback() invoked from target_complete_ok_work() hits an failure from __target_execute_cmd() -> cmd->execute_cmd(), that ends up calling transport_generic_request_failure() -> compare_and_write_post(), thus causing SCF_COMPARE_AND_WRITE_POST to incorrectly be set. The result of this bug is that target_complete_ok_work() no longer hits the if (!rc && !(cmd->se_cmd_flags & SCF_COMPARE_AND_WRITE_POST) check that forces an immediate return, and instead double completes the se_cmd in question, triggering an OOPs in the process. This patch changes compare_and_write_post() to only set this bit when a failure has not already occured to ensure the immediate return from within target_complete_ok_work(), and thus allow transport_generic_request_failure() to handle the sending of the CHECK_CONDITION exception status. Reported-by: Thomas Glanzmann <thomas@glanzmann.de> Tested-by: Thomas Glanzmann <thomas@glanzmann.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
| * | | | target: Reset data_length for COMPARE_AND_WRITE to NoLB * block_sizeNicholas Bellinger2013-10-031-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch resets se_cmd->data_length for COMPARE_AND_WRITE emulation within sbc_compare_and_write() to NoLB * block_size in order to address a bug with FILEIO backends where a I/O failure will occur when data_length does not match the I/O size being actually dispatched for the individual per block READs + WRITEs. This is done late enough in sbc_compare_and_write() after the memory allocations have occured in transport_generic_new_cmd() to not cause any unwanted side-effects. Reported-by: Thomas Glanzmann <thomas@glanzmann.de> Tested-by: Thomas Glanzmann <thomas@glanzmann.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
| * | | | ib_srpt: always set response for task managementJack Wang2013-10-031-6/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The SRP specification requires: "Response data shall be provided in any SRP_RSP response that is sent in response to an SRP_TSK_MGMT request (see 6.7). The information in the RSP_CODE field (see table 24) shall indicate the completion status of the task management function." So fix this to avoid the SRP initiator interprets task management functions that succeeded as failed. Signed-off-by: Jack Wang <jinpu.wang@profitbricks.com> Cc: stable@vger.kernel.org # 3.3+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
| * | | | target: Fall back to vzalloc upon ->sess_cmd_map kzalloc failureNicholas Bellinger2013-10-011-5/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch changes transport_alloc_session_tags() to fall back to use vzalloc when kzalloc fails for big tag_num that end up generating larger order allocations. Also use is_vmalloc_addr() in transport_alloc_session_tags() failure path, and normal transport_free_session() path to determine when vfree() needs to be called instead of kfree(). v2 changes: - Use __GFP_NOWARN | __GFP_REPEAT for sess_cmd_map kzalloc (mst) Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Asias He <asias@redhat.com> Cc: Kent Overstreet <kmo@daterainc.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
| * | | | vhost/scsi: Use GFP_ATOMIC with percpu_ida_alloc for obtaining tagNicholas Bellinger2013-10-011-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix GFP_KERNEL -> GFP_ATOMIC usage of percpu_ida_alloc() within vhost_scsi_get_tag(), as this code is expected to be called directly from interrupt context. v2 changes: - Handle possible tag < 0 failure with GFP_ATOMIC Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Asias He <asias@redhat.com> Cc: Kent Overstreet <kmo@daterainc.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-02-08 08:58:04 +0000