aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/input/mouse
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/input/mouse')
-rw-r--r--drivers/input/mouse/appletouch.c59
-rw-r--r--drivers/input/mouse/bcm5974.c24
-rw-r--r--drivers/input/mouse/elantech.c10
-rw-r--r--drivers/input/mouse/gpio_mouse.c2
-rw-r--r--drivers/input/mouse/sentelic.c8
-rw-r--r--drivers/input/mouse/synaptics.c3
-rw-r--r--drivers/input/mouse/trackpoint.c14
7 files changed, 74 insertions, 46 deletions
diff --git a/drivers/input/mouse/appletouch.c b/drivers/input/mouse/appletouch.c
index 0acbc7d50d05..e42f1fa8cdc0 100644
--- a/drivers/input/mouse/appletouch.c
+++ b/drivers/input/mouse/appletouch.c
@@ -195,6 +195,7 @@ enum atp_status_bits {
struct atp {
char phys[64];
struct usb_device *udev; /* usb device */
+ struct usb_interface *intf; /* usb interface */
struct urb *urb; /* usb request block */
u8 *data; /* transferred data */
struct input_dev *input; /* input dev */
@@ -253,8 +254,9 @@ MODULE_PARM_DESC(debug, "Activate debugging output");
* packets (Report ID 2). This code changes device mode, so it
* sends raw sensor reports (Report ID 5).
*/
-static int atp_geyser_init(struct usb_device *udev)
+static int atp_geyser_init(struct atp *dev)
{
+ struct usb_device *udev = dev->udev;
char *data;
int size;
int i;
@@ -262,7 +264,7 @@ static int atp_geyser_init(struct usb_device *udev)
data = kmalloc(8, GFP_KERNEL);
if (!data) {
- err("Out of memory");
+ dev_err(&dev->intf->dev, "Out of memory\n");
return -ENOMEM;
}
@@ -277,7 +279,7 @@ static int atp_geyser_init(struct usb_device *udev)
for (i = 0; i < 8; i++)
dprintk("appletouch[%d]: %d\n", i, data[i]);
- err("Failed to read mode from device.");
+ dev_err(&dev->intf->dev, "Failed to read mode from device.\n");
ret = -EIO;
goto out_free;
}
@@ -296,7 +298,7 @@ static int atp_geyser_init(struct usb_device *udev)
for (i = 0; i < 8; i++)
dprintk("appletouch[%d]: %d\n", i, data[i]);
- err("Failed to request geyser raw mode");
+ dev_err(&dev->intf->dev, "Failed to request geyser raw mode\n");
ret = -EIO;
goto out_free;
}
@@ -313,16 +315,16 @@ out_free:
static void atp_reinit(struct work_struct *work)
{
struct atp *dev = container_of(work, struct atp, work);
- struct usb_device *udev = dev->udev;
int retval;
dprintk("appletouch: putting appletouch to sleep (reinit)\n");
- atp_geyser_init(udev);
+ atp_geyser_init(dev);
retval = usb_submit_urb(dev->urb, GFP_ATOMIC);
if (retval)
- err("atp_reinit: usb_submit_urb failed with error %d",
- retval);
+ dev_err(&dev->intf->dev,
+ "atp_reinit: usb_submit_urb failed with error %d\n",
+ retval);
}
static int atp_calculate_abs(int *xy_sensors, int nb_sensors, int fact,
@@ -400,6 +402,7 @@ static inline void atp_report_fingers(struct input_dev *input, int fingers)
static int atp_status_check(struct urb *urb)
{
struct atp *dev = urb->context;
+ struct usb_interface *intf = dev->intf;
switch (urb->status) {
case 0:
@@ -407,8 +410,8 @@ static int atp_status_check(struct urb *urb)
break;
case -EOVERFLOW:
if (!dev->overflow_warned) {
- printk(KERN_WARNING "appletouch: OVERFLOW with data "
- "length %d, actual length is %d\n",
+ dev_warn(&intf->dev,
+ "appletouch: OVERFLOW with data length %d, actual length is %d\n",
dev->info->datalen, dev->urb->actual_length);
dev->overflow_warned = true;
}
@@ -416,13 +419,15 @@ static int atp_status_check(struct urb *urb)
case -ENOENT:
case -ESHUTDOWN:
/* This urb is terminated, clean up */
- dbg("atp_complete: urb shutting down with status: %d",
- urb->status);
+ dev_dbg(&intf->dev,
+ "atp_complete: urb shutting down with status: %d\n",
+ urb->status);
return ATP_URB_STATUS_ERROR_FATAL;
default:
- dbg("atp_complete: nonzero urb status received: %d",
- urb->status);
+ dev_dbg(&intf->dev,
+ "atp_complete: nonzero urb status received: %d\n",
+ urb->status);
return ATP_URB_STATUS_ERROR;
}
@@ -445,7 +450,8 @@ static void atp_detect_size(struct atp *dev)
for (i = dev->info->xsensors; i < ATP_XSENSORS; i++) {
if (dev->xy_cur[i]) {
- printk(KERN_INFO "appletouch: 17\" model detected.\n");
+ dev_info(&dev->intf->dev,
+ "appletouch: 17\" model detected.\n");
input_set_abs_params(dev->input, ABS_X, 0,
(dev->info->xsensors_17 - 1) *
@@ -588,8 +594,9 @@ static void atp_complete_geyser_1_2(struct urb *urb)
exit:
retval = usb_submit_urb(dev->urb, GFP_ATOMIC);
if (retval)
- err("atp_complete: usb_submit_urb failed with result %d",
- retval);
+ dev_err(&dev->intf->dev,
+ "atp_complete: usb_submit_urb failed with result %d\n",
+ retval);
}
/* Interrupt function for older touchpads: GEYSER3/GEYSER4 */
@@ -722,8 +729,9 @@ static void atp_complete_geyser_3_4(struct urb *urb)
exit:
retval = usb_submit_urb(dev->urb, GFP_ATOMIC);
if (retval)
- err("atp_complete: usb_submit_urb failed with result %d",
- retval);
+ dev_err(&dev->intf->dev,
+ "atp_complete: usb_submit_urb failed with result %d\n",
+ retval);
}
static int atp_open(struct input_dev *input)
@@ -748,14 +756,12 @@ static void atp_close(struct input_dev *input)
static int atp_handle_geyser(struct atp *dev)
{
- struct usb_device *udev = dev->udev;
-
if (dev->info != &fountain_info) {
/* switch to raw sensor mode */
- if (atp_geyser_init(udev))
+ if (atp_geyser_init(dev))
return -EIO;
- printk(KERN_INFO "appletouch: Geyser mode initialized.\n");
+ dev_info(&dev->intf->dev, "Geyser mode initialized.\n");
}
return 0;
@@ -785,7 +791,7 @@ static int atp_probe(struct usb_interface *iface,
}
}
if (!int_in_endpointAddr) {
- err("Could not find int-in endpoint");
+ dev_err(&iface->dev, "Could not find int-in endpoint\n");
return -EIO;
}
@@ -793,11 +799,12 @@ static int atp_probe(struct usb_interface *iface,
dev = kzalloc(sizeof(struct atp), GFP_KERNEL);
input_dev = input_allocate_device();
if (!dev || !input_dev) {
- err("Out of memory");
+ dev_err(&iface->dev, "Out of memory\n");
goto err_free_devs;
}
dev->udev = udev;
+ dev->intf = iface;
dev->input = input_dev;
dev->info = info;
dev->overflow_warned = false;
@@ -886,7 +893,7 @@ static void atp_disconnect(struct usb_interface *iface)
usb_free_urb(dev->urb);
kfree(dev);
}
- printk(KERN_INFO "input: appletouch disconnected\n");
+ dev_info(&iface->dev, "input: appletouch disconnected\n");
}
static int atp_recover(struct atp *dev)
diff --git a/drivers/input/mouse/bcm5974.c b/drivers/input/mouse/bcm5974.c
index f9e2758b9f46..2cf681d98c0d 100644
--- a/drivers/input/mouse/bcm5974.c
+++ b/drivers/input/mouse/bcm5974.c
@@ -584,7 +584,7 @@ static int bcm5974_wellspring_mode(struct bcm5974 *dev, bool on)
int retval = 0, size;
if (!data) {
- err("bcm5974: out of memory");
+ dev_err(&dev->intf->dev, "out of memory\n");
retval = -ENOMEM;
goto out;
}
@@ -597,7 +597,7 @@ static int bcm5974_wellspring_mode(struct bcm5974 *dev, bool on)
BCM5974_WELLSPRING_MODE_REQUEST_INDEX, data, 8, 5000);
if (size != 8) {
- err("bcm5974: could not read from device");
+ dev_err(&dev->intf->dev, "could not read from device\n");
retval = -EIO;
goto out;
}
@@ -615,7 +615,7 @@ static int bcm5974_wellspring_mode(struct bcm5974 *dev, bool on)
BCM5974_WELLSPRING_MODE_REQUEST_INDEX, data, 8, 5000);
if (size != 8) {
- err("bcm5974: could not write to device");
+ dev_err(&dev->intf->dev, "could not write to device\n");
retval = -EIO;
goto out;
}
@@ -631,6 +631,7 @@ static int bcm5974_wellspring_mode(struct bcm5974 *dev, bool on)
static void bcm5974_irq_button(struct urb *urb)
{
struct bcm5974 *dev = urb->context;
+ struct usb_interface *intf = dev->intf;
int error;
switch (urb->status) {
@@ -640,10 +641,11 @@ static void bcm5974_irq_button(struct urb *urb)
case -ECONNRESET:
case -ENOENT:
case -ESHUTDOWN:
- dbg("bcm5974: button urb shutting down: %d", urb->status);
+ dev_dbg(&intf->dev, "button urb shutting down: %d\n",
+ urb->status);
return;
default:
- dbg("bcm5974: button urb status: %d", urb->status);
+ dev_dbg(&intf->dev, "button urb status: %d\n", urb->status);
goto exit;
}
@@ -654,12 +656,13 @@ static void bcm5974_irq_button(struct urb *urb)
exit:
error = usb_submit_urb(dev->bt_urb, GFP_ATOMIC);
if (error)
- err("bcm5974: button urb failed: %d", error);
+ dev_err(&intf->dev, "button urb failed: %d\n", error);
}
static void bcm5974_irq_trackpad(struct urb *urb)
{
struct bcm5974 *dev = urb->context;
+ struct usb_interface *intf = dev->intf;
int error;
switch (urb->status) {
@@ -669,10 +672,11 @@ static void bcm5974_irq_trackpad(struct urb *urb)
case -ECONNRESET:
case -ENOENT:
case -ESHUTDOWN:
- dbg("bcm5974: trackpad urb shutting down: %d", urb->status);
+ dev_dbg(&intf->dev, "trackpad urb shutting down: %d\n",
+ urb->status);
return;
default:
- dbg("bcm5974: trackpad urb status: %d", urb->status);
+ dev_dbg(&intf->dev, "trackpad urb status: %d\n", urb->status);
goto exit;
}
@@ -687,7 +691,7 @@ static void bcm5974_irq_trackpad(struct urb *urb)
exit:
error = usb_submit_urb(dev->tp_urb, GFP_ATOMIC);
if (error)
- err("bcm5974: trackpad urb failed: %d", error);
+ dev_err(&intf->dev, "trackpad urb failed: %d\n", error);
}
/*
@@ -833,7 +837,7 @@ static int bcm5974_probe(struct usb_interface *iface,
dev = kzalloc(sizeof(struct bcm5974), GFP_KERNEL);
input_dev = input_allocate_device();
if (!dev || !input_dev) {
- err("bcm5974: out of memory");
+ dev_err(&iface->dev, "out of memory\n");
goto err_free_devs;
}
diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c
index d2c0db159b18..479011004a11 100644
--- a/drivers/input/mouse/elantech.c
+++ b/drivers/input/mouse/elantech.c
@@ -486,7 +486,6 @@ static void elantech_input_sync_v4(struct psmouse *psmouse)
unsigned char *packet = psmouse->packet;
input_report_key(dev, BTN_LEFT, packet[0] & 0x01);
- input_report_key(dev, BTN_RIGHT, packet[0] & 0x02);
input_mt_report_pointer_emulation(dev, true);
input_sync(dev);
}
@@ -967,6 +966,7 @@ static int elantech_set_input_params(struct psmouse *psmouse)
if (elantech_set_range(psmouse, &x_min, &y_min, &x_max, &y_max, &width))
return -1;
+ __set_bit(INPUT_PROP_POINTER, dev->propbit);
__set_bit(EV_KEY, dev->evbit);
__set_bit(EV_ABS, dev->evbit);
__clear_bit(EV_REL, dev->evbit);
@@ -1017,7 +1017,9 @@ static int elantech_set_input_params(struct psmouse *psmouse)
*/
psmouse_warn(psmouse, "couldn't query resolution data.\n");
}
-
+ /* v4 is clickpad, with only one button. */
+ __set_bit(INPUT_PROP_BUTTONPAD, dev->propbit);
+ __clear_bit(BTN_RIGHT, dev->keybit);
__set_bit(BTN_TOOL_QUADTAP, dev->keybit);
/* For X to recognize me as touchpad. */
input_set_abs_params(dev, ABS_X, x_min, x_max, 0, 0);
@@ -1245,6 +1247,8 @@ static void elantech_disconnect(struct psmouse *psmouse)
*/
static int elantech_reconnect(struct psmouse *psmouse)
{
+ psmouse_reset(psmouse);
+
if (elantech_detect(psmouse, 0))
return -1;
@@ -1324,6 +1328,8 @@ int elantech_init(struct psmouse *psmouse)
if (!etd)
return -ENOMEM;
+ psmouse_reset(psmouse);
+
etd->parity[0] = 1;
for (i = 1; i < 256; i++)
etd->parity[i] = etd->parity[i & (i - 1)] ^ 1;
diff --git a/drivers/input/mouse/gpio_mouse.c b/drivers/input/mouse/gpio_mouse.c
index a9ad8e1402be..39fe9b737cae 100644
--- a/drivers/input/mouse/gpio_mouse.c
+++ b/drivers/input/mouse/gpio_mouse.c
@@ -12,9 +12,9 @@
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/input-polldev.h>
+#include <linux/gpio.h>
#include <linux/gpio_mouse.h>
-#include <asm/gpio.h>
/*
* Timer function which is run every scan_ms ms when the device is opened.
diff --git a/drivers/input/mouse/sentelic.c b/drivers/input/mouse/sentelic.c
index a977bfaa6821..661a0ca3b3d6 100644
--- a/drivers/input/mouse/sentelic.c
+++ b/drivers/input/mouse/sentelic.c
@@ -741,6 +741,14 @@ static psmouse_ret_t fsp_process_byte(struct psmouse *psmouse)
}
} else {
/* SFAC packet */
+ if ((packet[0] & (FSP_PB0_LBTN|FSP_PB0_PHY_BTN)) ==
+ FSP_PB0_LBTN) {
+ /* On-pad click in SFAC mode should be handled
+ * by userspace. On-pad clicks in MFMC mode
+ * are real clickpad clicks, and not ignored.
+ */
+ packet[0] &= ~FSP_PB0_LBTN;
+ }
/* no multi-finger information */
ad->last_mt_fgr = 0;
diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c
index 8081a0a5d602..a4b14a41cbf4 100644
--- a/drivers/input/mouse/synaptics.c
+++ b/drivers/input/mouse/synaptics.c
@@ -274,7 +274,8 @@ static int synaptics_set_advanced_gesture_mode(struct psmouse *psmouse)
static unsigned char param = 0xc8;
struct synaptics_data *priv = psmouse->private;
- if (!SYN_CAP_ADV_GESTURE(priv->ext_cap_0c))
+ if (!(SYN_CAP_ADV_GESTURE(priv->ext_cap_0c) ||
+ SYN_CAP_IMAGE_SENSOR(priv->ext_cap_0c)))
return 0;
if (psmouse_sliced_command(psmouse, SYN_QUE_MODEL))
diff --git a/drivers/input/mouse/trackpoint.c b/drivers/input/mouse/trackpoint.c
index 22b218018137..f3102494237d 100644
--- a/drivers/input/mouse/trackpoint.c
+++ b/drivers/input/mouse/trackpoint.c
@@ -304,7 +304,7 @@ int trackpoint_detect(struct psmouse *psmouse, bool set_properties)
return 0;
if (trackpoint_read(&psmouse->ps2dev, TP_EXT_BTN, &button_info)) {
- printk(KERN_WARNING "trackpoint.c: failed to get extended button data\n");
+ psmouse_warn(psmouse, "failed to get extended button data\n");
button_info = 0;
}
@@ -326,16 +326,18 @@ int trackpoint_detect(struct psmouse *psmouse, bool set_properties)
error = sysfs_create_group(&ps2dev->serio->dev.kobj, &trackpoint_attr_group);
if (error) {
- printk(KERN_ERR
- "trackpoint.c: failed to create sysfs attributes, error: %d\n",
- error);
+ psmouse_err(psmouse,
+ "failed to create sysfs attributes, error: %d\n",
+ error);
kfree(psmouse->private);
psmouse->private = NULL;
return -1;
}
- printk(KERN_INFO "IBM TrackPoint firmware: 0x%02x, buttons: %d/%d\n",
- firmware_id, (button_info & 0xf0) >> 4, button_info & 0x0f);
+ psmouse_info(psmouse,
+ "IBM TrackPoint firmware: 0x%02x, buttons: %d/%d\n",
+ firmware_id,
+ (button_info & 0xf0) >> 4, button_info & 0x0f);
return 0;
}
generated by cgit v1.2.3 (git 2.25.1) at 2025-06-27 14:02:38 +0000