diff options
Diffstat (limited to 'arch/arm/boot')
| -rw-r--r-- | arch/arm/boot/dts/meson8b.dtsi | 210 |
1 files changed, 84 insertions, 126 deletions
diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi index 828aa49c678c..ef9ac974111c 100644 --- a/arch/arm/boot/dts/meson8b.dtsi +++ b/arch/arm/boot/dts/meson8b.dtsi @@ -47,11 +47,9 @@ #include <dt-bindings/clock/meson8b-clkc.h> #include <dt-bindings/gpio/meson8b-gpio.h> #include <dt-bindings/reset/amlogic,meson8b-reset.h> -#include "skeleton.dtsi" +#include "meson.dtsi" / { - interrupt-parent = <&gic>; - cpus { #address-cells = <1>; #size-cells = <0>; @@ -84,147 +82,107 @@ reg = <0x203>; }; }; +}; /* end of / */ - soc { - compatible = "simple-bus"; +&aobus { + pinctrl_aobus: pinctrl@84 { + compatible = "amlogic,meson8b-aobus-pinctrl"; + reg = <0x84 0xc>; #address-cells = <1>; #size-cells = <1>; ranges; - L2: l2-cache-controller@c4200000 { - compatible = "arm,pl310-cache"; - reg = <0xc4200000 0x1000>; - cache-unified; - cache-level = <2>; + gpio_ao: ao-bank@14 { + reg = <0x14 0x4>, + <0x2c 0x4>, + <0x24 0x8>; + reg-names = "mux", "pull", "gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl_aobus 0 130 16>; }; - gic: interrupt-controller@c4301000 { - compatible = "arm,cortex-a9-gic"; - reg = <0xc4301000 0x1000>, - <0xc4300100 0x0100>; - interrupt-controller; - #interrupt-cells = <3>; - }; - - reset: reset-controller@c1104404 { - compatible = "amlogic,meson8b-reset"; - reg = <0xc1104404 0x20>; - #reset-cells = <1>; - }; - - wdt: watchdog@c1109900 { - compatible = "amlogic,meson8b-wdt"; - reg = <0xc1109900 0x8>; - interrupts = <0 0 1>; + uart_ao_a_pins: uart_ao_a { + mux { + groups = "uart_tx_ao_a", "uart_rx_ao_a"; + function = "uart_ao"; + }; }; + }; +}; - timer@c1109940 { - compatible = "amlogic,meson6-timer"; - reg = <0xc1109940 0x18>; - interrupts = <0 10 1>; - }; +&cbus { + clkc: clock-controller@4000 { + #clock-cells = <1>; + compatible = "amlogic,meson8b-clkc"; + reg = <0x8000 0x4>, <0x4000 0x460>; + }; - uart_AO: serial@c81004c0 { - compatible = "amlogic,meson-uart"; - reg = <0xc81004c0 0x18>; - interrupts = <0 90 1>; - clocks = <&clkc CLKID_CLK81>; - status = "disabled"; - }; + reset: reset-controller@4404 { + compatible = "amlogic,meson8b-reset"; + reg = <0x4404 0x20>; + #reset-cells = <1>; + }; - uart_A: serial@c11084c0 { - compatible = "amlogic,meson-uart"; - reg = <0xc11084c0 0x18>; - interrupts = <0 26 1>; - clocks = <&clkc CLKID_CLK81>; - status = "disabled"; - }; + pwm_ab: pwm@8550 { + compatible = "amlogic,meson8b-pwm"; + reg = <0x8550 0x10>; + #pwm-cells = <3>; + status = "disabled"; + }; - uart_B: serial@c11084dc { - compatible = "amlogic,meson-uart"; - reg = <0xc11084dc 0x18>; - interrupts = <0 75 1>; - clocks = <&clkc CLKID_CLK81>; - status = "disabled"; - }; + pwm_cd: pwm@8650 { + compatible = "amlogic,meson8b-pwm"; + reg = <0x8650 0x10>; + #pwm-cells = <3>; + status = "disabled"; + }; - uart_C: serial@c1108700 { - compatible = "amlogic,meson-uart"; - reg = <0xc1108700 0x18>; - interrupts = <0 93 1>; - clocks = <&clkc CLKID_CLK81>; - status = "disabled"; - }; + pwm_ef: pwm@86c0 { + compatible = "amlogic,meson8b-pwm"; + reg = <0x86c0 0x10>; + #pwm-cells = <3>; + status = "disabled"; + }; - clkc: clock-controller@c1104000 { - #clock-cells = <1>; - compatible = "amlogic,meson8b-clkc"; - reg = <0xc1108000 0x4>, <0xc1104000 0x460>; - }; + wdt: watchdog@9900 { + compatible = "amlogic,meson8b-wdt"; + reg = <0x9900 0x8>; + interrupts = <0 0 1>; + }; - pwm_ab: pwm@8550 { - compatible = "amlogic,meson8b-pwm"; - reg = <0xc1108550 0x10>; - #pwm-cells = <3>; - status = "disabled"; - }; + pinctrl_cbus: pinctrl@9880 { + compatible = "amlogic,meson8b-cbus-pinctrl"; + reg = <0x9880 0x10>; + #address-cells = <1>; + #size-cells = <1>; + ranges; - pwm_cd: pwm@8650 { - compatible = "amlogic,meson8b-pwm"; - reg = <0xc1108650 0x10>; - #pwm-cells = <3>; - status = "disabled"; + gpio: banks@80b0 { + reg = <0x80b0 0x28>, + <0x80e8 0x18>, + <0x8120 0x18>, + <0x8030 0x38>; + reg-names = "mux", "pull", "pull-enable", "gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl_cbus 0 0 130>; }; + }; +}; - pwm_ef: pwm@86c0 { - compatible = "amlogic,meson8b-pwm"; - reg = <0xc11086c0 0x10>; - #pwm-cells = <3>; - status = "disabled"; - }; +&uart_AO { + clocks = <&clkc CLKID_CLK81>; +}; - pinctrl_cbus: pinctrl@c1109880 { - compatible = "amlogic,meson8b-cbus-pinctrl"; - reg = <0xc1109880 0x10>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - gpio: banks@c11080b0 { - reg = <0xc11080b0 0x28>, - <0xc11080e8 0x18>, - <0xc1108120 0x18>, - <0xc1108030 0x38>; - reg-names = "mux", "pull", "pull-enable", "gpio"; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&pinctrl_cbus 0 0 130>; - }; - }; +&uart_A { + clocks = <&clkc CLKID_CLK81>; +}; - pinctrl_aobus: pinctrl@c8100084 { - compatible = "amlogic,meson8b-aobus-pinctrl"; - reg = <0xc8100084 0xc>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - gpio_ao: ao-bank@c1108030 { - reg = <0xc8100014 0x4>, - <0xc810002c 0x4>, - <0xc8100024 0x8>; - reg-names = "mux", "pull", "gpio"; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&pinctrl_aobus 0 130 16>; - }; +&uart_B { + clocks = <&clkc CLKID_CLK81>; +}; - uart_ao_a_pins: uart_ao_a { - mux { - groups = "uart_tx_ao_a", "uart_rx_ao_a"; - function = "uart_ao"; - }; - }; - }; - }; -}; /* end of / */ +&uart_C { + clocks = <&clkc CLKID_CLK81>; +}; |