kernel_replicant_linux/kernel/power/hibernate.c, branch v3.8-rc1

Merge tag 'pm-for-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

2012-07-22T20:36:52+00:00

Pull power management updates from Rafael Wysocki:

 - ACPI conversion to PM handling based on struct dev_pm_ops.
 - Conversion of a number of platform drivers to PM handling based on
   struct dev_pm_ops and removal of empty legacy PM callbacks from a
   couple of PCI drivers.
 - Suspend-to-both for in-kernel hibernation from Bojan Smojver.
 - cpuidle fixes and cleanups from ShuoX Liu, Daniel Lezcano and Preeti
   Murthy.
 - cpufreq bug fixes from Jonghwa Lee and Stephen Boyd.
 - Suspend and hibernate fixes from Srivatsa Bhat and Colin Cross.
 - Generic PM domains framework updates.
 - RTC CMOS wakeup signaling update from Paul Fox.
 - sparse warnings fixes from Sachin Kamat.
 - Build warnings fixes for the generic PM domains framework and PM
   sysfs code.
 - sysfs switch for printing device suspend times from Sameer Nanda.
 - Documentation fix from Oskar Schirmer.

* tag 'pm-for-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (70 commits)
  cpufreq: Fix sysfs deadlock with concurrent hotplug/frequency switch
  EXYNOS: bugfix on retrieving old_index from freqs.old
  PM / Sleep: call early resume handlers when suspend_noirq fails
  PM / QoS: Use NULL pointer instead of plain integer in qos.c
  PM / QoS: Use NULL pointer instead of plain integer in pm_qos.h
  PM / Sleep: Require CAP_BLOCK_SUSPEND to use wake_lock/wake_unlock
  PM / Sleep: Add missing static storage class specifiers in main.c
  cpuilde / ACPI: remove time from acpi_processor_cx structure
  cpuidle / ACPI: remove usage from acpi_processor_cx structure
  cpuidle / ACPI : remove latency_ticks from acpi_processor_cx structure
  rtc-cmos: report wakeups from interrupt handler
  PM / Sleep: Fix build warning in sysfs.c for CONFIG_PM_SLEEP unset
  PM / Domains: Fix build warning for CONFIG_PM_RUNTIME unset
  olpc-xo15-sci: Use struct dev_pm_ops for power management
  PM / Domains: Replace plain integer with NULL pointer in domain.c file
  PM / Domains: Add missing static storage class specifier in domain.c file
  PM / crypto / ux500: Use struct dev_pm_ops for power management
  PM / IPMI: Remove empty legacy PCI PM callbacks
  tpm_nsc: Use struct dev_pm_ops for power management
  tpm_tis: Use struct dev_pm_ops for power management
  ...

Make wait_for_device_probe() also do scsi_complete_async_scans()

2012-07-19T01:15:46+00:00

Commit a7a20d103994 ("sd: limit the scope of the async probe domain")
make the SCSI device probing run device discovery in it's own async
domain.

However, as a result, the partition detection was no longer synchronized
by async_synchronize_full() (which, despite the name, only synchronizes
the global async space, not all of them).  Which in turn meant that
"wait_for_device_probe()" would not wait for the SCSI partitions to be
parsed.

And "wait_for_device_probe()" was what the boot time init code relied on
for mounting the root filesystem.

Now, most people never noticed this, because not only is it
timing-dependent, but modern distributions all use initrd.  So the root
filesystem isn't actually on a disk at all.  And then before they
actually mount the final disk filesystem, they will have loaded the
scsi-wait-scan module, which not only does the expected
wait_for_device_probe(), but also does scsi_complete_async_scans().

[ Side note: scsi_complete_async_scans() had also been partially broken,
  but that was fixed in commit 43a8d39d0137 ("fix async probe
  regression"), so that same commit a7a20d103994 had actually broken
  setups even if you used scsi-wait-scan explicitly ]

Solve this problem by just moving the scsi_complete_async_scans() call
into wait_for_device_probe().  Everybody who wants to wait for device
probing to finish really wants the SCSI probing to complete, so there's
no reason not to do this.

So now "wait_for_device_probe()" really does what the name implies, and
properly waits for device probing to finish.  This also removes the now
unnecessary extra calls to scsi_complete_async_scans().

Reported-and-tested-by: Artem S. Tashkinov 
Cc: Dan Williams 
Cc: Alan Stern 
Cc: James Bottomley 
Cc: Borislav Petkov 
Cc: linux-scsi 
Signed-off-by: Linus Torvalds

ftrace: Disable function tracing during suspend/resume and hibernation, again

2012-07-01T11:31:22+00:00

If function tracing is enabled for some of the low-level suspend/resume
functions, it leads to triple fault during resume from suspend, ultimately
ending up in a reboot instead of a resume (or a total refusal to come out
of suspended state, on some machines).

This issue was explained in more detail in commit f42ac38c59e0a03d (ftrace:
disable tracing for suspend to ram). However, the changes made by that commit
got reverted by commit cbe2f5a6e84eebb (tracing: allow tracing of
suspend/resume & hibernation code again). So, unfortunately since things are
not yet robust enough to allow tracing of low-level suspend/resume functions,
suspend/resume is still broken when ftrace is enabled.

So fix this by disabling function tracing during suspend/resume & hibernation.

Signed-off-by: Srivatsa S. Bhat 
Cc: stable@vger.kernel.org
Signed-off-by: Rafael J. Wysocki

PM / Hibernate: Enable suspend to both for in-kernel hibernation.

2012-07-01T11:31:22+00:00

It is often useful to suspend to memory after hibernation image has been
written to disk. If the battery runs out or power is otherwise lost, the
computer will resume from the hibernated image. If not, it will resume
from memory and hibernation image will be discarded.

Signed-off-by: Bojan Smojver 
Signed-off-by: Rafael J. Wysocki

PM / Hibernate: Use get_gendisk to verify partition if resume_file is integer format

2012-05-18T18:44:59+00:00

Sometimes resume= parameter comes in integer style (e.g. major:minor)
and then name_to_dev_t can not detect partition properly. (especially
async device like usb, mmc).

This patch calls get_gendisk() if resumewait is true and resume_file
is in integer format to work around this problem.

Signed-off-by: Minho Ban 
Signed-off-by: Rafael J. Wysocki

PM / Sleep: Move disabling of usermode helpers to the freezer

2012-03-28T21:30:21+00:00

The core suspend/hibernation code calls usermodehelper_disable() to
avoid race conditions between the freezer and the starting of
usermode helpers and each code path has to do that on its own.
However, it is always called right before freeze_processes()
and usermodehelper_enable() is always called right after
thaw_processes().  For this reason, to avoid code duplication and
to make the connection between usermodehelper_disable() and the
freezer more visible, make freeze_processes() call it and remove the
direct usermodehelper_disable() and usermodehelper_enable() calls
from all suspend/hibernation code paths.

Signed-off-by: Rafael J. Wysocki 
Acked-by: Greg Kroah-Hartman 
Cc: stable@vger.kernel.org

PM / Hibernate: Disable usermode helpers right before freezing tasks

2012-03-28T21:30:14+00:00

There is no reason to call usermodehelper_disable() before creating
memory bitmaps in hibernate() and software_resume(), so call it right
before freeze_processes(), in accordance with the other suspend and
hibernation code.  Consequently, call usermodehelper_enable() right
after the thawing of tasks rather than after freeing the memory
bitmaps.

Signed-off-by: Rafael J. Wysocki 
Acked-by: Greg Kroah-Hartman 
Cc: stable@vger.kernel.org

PM / Hibernate: Enable usermodehelpers in hibernate() error path

2012-03-04T22:08:37+00:00

If create_basic_memory_bitmaps() fails, usermodehelpers are not re-enabled
before returning. Fix this. And while at it, reword the goto labels so that
they look more meaningful.

Signed-off-by: Srivatsa S. Bhat 
Cc: stable@vger.kernel.org
Signed-off-by: Rafael J. Wysocki

PM / Hibernate: Refactor and simplify freezer_test_done

2012-02-09T22:56:01+00:00

The code related to 'freezer_test_done' is needlessly convoluted.
Refactor the code and simplify the implementation.

Signed-off-by: Srivatsa S. Bhat 
Signed-off-by: Rafael J. Wysocki

PM / Hibernate: Thaw kernel threads in hibernation_snapshot() in error/test path

2012-02-09T22:55:54+00:00

In the hibernation call path, the kernel threads are frozen inside
hibernation_snapshot(). If we happen to encounter an error further down
the road or if we are exiting early due to a successful freezer test,
then thaw kernel threads before returning to the caller.

Signed-off-by: Srivatsa S. Bhat 
Acked-by: Tejun Heo 
Signed-off-by: Rafael J. Wysocki