summaryrefslogtreecommitdiffstats
path: root/bcm4329/src/include/bcmspibrcm.h
diff options
context:
space:
mode:
Diffstat (limited to 'bcm4329/src/include/bcmspibrcm.h')
-rw-r--r--bcm4329/src/include/bcmspibrcm.h134
1 files changed, 0 insertions, 134 deletions
diff --git a/bcm4329/src/include/bcmspibrcm.h b/bcm4329/src/include/bcmspibrcm.h
deleted file mode 100644
index a422373..0000000
--- a/bcm4329/src/include/bcmspibrcm.h
+++ /dev/null
@@ -1,134 +0,0 @@
-/*
- * SD-SPI Protocol Conversion - BCMSDH->gSPI Translation Layer
- *
- * Copyright (C) 2009, Broadcom Corporation
- * All Rights Reserved.
- *
- * This is UNPUBLISHED PROPRIETARY SOURCE CODE of Broadcom Corporation;
- * the contents of this file may not be disclosed to third parties, copied
- * or duplicated in any form, in whole or in part, without the prior
- * written permission of Broadcom Corporation.
- *
- * $Id: bcmspibrcm.h,v 1.4.4.1.4.3.6.1 2008/09/27 17:03:25 Exp $
- */
-
-/* global msglevel for debug messages - bitvals come from sdiovar.h */
-
-#define sd_err(x)
-#define sd_trace(x)
-#define sd_info(x)
-#define sd_debug(x)
-#define sd_data(x)
-#define sd_ctrl(x)
-
-#define sd_log(x)
-
-#define SDIOH_ASSERT(exp) \
- do { if (!(exp)) \
- printf("!!!ASSERT fail: file %s lines %d", __FILE__, __LINE__); \
- } while (0)
-
-#define BLOCK_SIZE_F1 64
-#define BLOCK_SIZE_F2 2048
-#define BLOCK_SIZE_F3 2048
-
-/* internal return code */
-#define SUCCESS 0
-#undef ERROR
-#define ERROR 1
-#define ERROR_UF 2
-#define ERROR_OF 3
-
-/* private bus modes */
-#define SDIOH_MODE_SPI 0
-
-#define USE_BLOCKMODE 0x2 /* Block mode can be single block or multi */
-#define USE_MULTIBLOCK 0x4
-
-struct sdioh_info {
- uint cfg_bar; /* pci cfg address for bar */
- uint32 caps; /* cached value of capabilities reg */
- void *bar0; /* BAR0 for PCI Device */
- osl_t *osh; /* osh handler */
- void *controller; /* Pointer to SPI Controller's private data struct */
-
- uint lockcount; /* nest count of spi_lock() calls */
- bool client_intr_enabled; /* interrupt connnected flag */
- bool intr_handler_valid; /* client driver interrupt handler valid */
- sdioh_cb_fn_t intr_handler; /* registered interrupt handler */
- void *intr_handler_arg; /* argument to call interrupt handler */
- bool initialized; /* card initialized */
- uint32 target_dev; /* Target device ID */
- uint32 intmask; /* Current active interrupts */
- void *sdos_info; /* Pointer to per-OS private data */
-
- uint32 controller_type; /* Host controller type */
- uint8 version; /* Host Controller Spec Compliance Version */
- uint irq; /* Client irq */
- uint32 intrcount; /* Client interrupts */
- uint32 local_intrcount; /* Controller interrupts */
- bool host_init_done; /* Controller initted */
- bool card_init_done; /* Client SDIO interface initted */
- bool polled_mode; /* polling for command completion */
-
- bool sd_use_dma; /* DMA on CMD53 */
- bool sd_blockmode; /* sd_blockmode == FALSE => 64 Byte Cmd 53s. */
- /* Must be on for sd_multiblock to be effective */
- bool use_client_ints; /* If this is false, make sure to restore */
- /* polling hack in wl_linux.c:wl_timer() */
- int adapter_slot; /* Maybe dealing with multiple slots/controllers */
- int sd_mode; /* SD1/SD4/SPI */
- int client_block_size[SPI_MAX_IOFUNCS]; /* Blocksize */
- uint32 data_xfer_count; /* Current transfer */
- uint16 card_rca; /* Current Address */
- uint8 num_funcs; /* Supported funcs on client */
- uint32 card_dstatus; /* 32bit device status */
- uint32 com_cis_ptr;
- uint32 func_cis_ptr[SPI_MAX_IOFUNCS];
- void *dma_buf;
- ulong dma_phys;
- int r_cnt; /* rx count */
- int t_cnt; /* tx_count */
- uint32 wordlen; /* host processor 16/32bits */
- uint32 prev_fun;
- uint32 chip;
- uint32 chiprev;
- bool resp_delay_all;
- bool dwordmode;
-
- struct spierrstats_t spierrstats;
-};
-
-/************************************************************
- * Internal interfaces: per-port references into bcmspibrcm.c
- */
-
-/* Global message bits */
-extern uint sd_msglevel;
-
-/**************************************************************
- * Internal interfaces: bcmspibrcm.c references to per-port code
- */
-
-/* Interrupt (de)registration routines */
-extern int spi_register_irq(sdioh_info_t *sd, uint irq);
-extern void spi_free_irq(uint irq, sdioh_info_t *sd);
-
-/* OS-specific interrupt wrappers (atomic interrupt enable/disable) */
-extern void spi_lock(sdioh_info_t *sd);
-extern void spi_unlock(sdioh_info_t *sd);
-
-/* Allocate/init/free per-OS private data */
-extern int spi_osinit(sdioh_info_t *sd);
-extern void spi_osfree(sdioh_info_t *sd);
-
-#define SPI_RW_FLAG_M BITFIELD_MASK(1) /* Bit [31] - R/W Command Bit */
-#define SPI_RW_FLAG_S 31
-#define SPI_ACCESS_M BITFIELD_MASK(1) /* Bit [30] - Fixed/Incr Access */
-#define SPI_ACCESS_S 30
-#define SPI_FUNCTION_M BITFIELD_MASK(2) /* Bit [29:28] - Function Number */
-#define SPI_FUNCTION_S 28
-#define SPI_REG_ADDR_M BITFIELD_MASK(17) /* Bit [27:11] - Address */
-#define SPI_REG_ADDR_S 11
-#define SPI_LEN_M BITFIELD_MASK(11) /* Bit [10:0] - Packet length */
-#define SPI_LEN_S 0