From b2da8fa66ab180143e803de73dc5dda0e4e0d67a Mon Sep 17 00:00:00 2001
From: Abhisek Devkota <ciwrl@lineageos.org>
Date: Wed, 13 Dec 2017 18:58:26 -0800
Subject: Automatic translation import

Change-Id: I2ef32106209c49dabf1c27cff7a7ecf6c4053ff6
---
 res/values-kab-rDZ/array.xml      |  40 ++++
 res/values-kab-rDZ/cm_strings.xml |  31 +++
 res/values-kab-rDZ/strings.xml    | 424 ++++++++++++++++++++++++++++++++++++++
 res/values-sc-rIT/array.xml       |  40 ++++
 res/values-sc-rIT/cm_strings.xml  |  31 +++
 res/values-sc-rIT/strings.xml     | 424 ++++++++++++++++++++++++++++++++++++++
 res/values-vec-rIT/array.xml      |  40 ++++
 res/values-vec-rIT/cm_strings.xml |  31 +++
 res/values-vec-rIT/strings.xml    | 424 ++++++++++++++++++++++++++++++++++++++
 9 files changed, 1485 insertions(+)
 create mode 100644 res/values-kab-rDZ/array.xml
 create mode 100644 res/values-kab-rDZ/cm_strings.xml
 create mode 100644 res/values-kab-rDZ/strings.xml
 create mode 100644 res/values-sc-rIT/array.xml
 create mode 100644 res/values-sc-rIT/cm_strings.xml
 create mode 100644 res/values-sc-rIT/strings.xml
 create mode 100644 res/values-vec-rIT/array.xml
 create mode 100644 res/values-vec-rIT/cm_strings.xml
 create mode 100644 res/values-vec-rIT/strings.xml

diff --git a/res/values-kab-rDZ/array.xml b/res/values-kab-rDZ/array.xml
new file mode 100644
index 000000000..c1326001a
--- /dev/null
+++ b/res/values-kab-rDZ/array.xml
@@ -0,0 +1,40 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--Generated by crowdin.com-->
+<!--
+    Copyright (C) 2012 The Android Open Source Project
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+         http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License
+  -->
+<resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2">
+  <!--
+    The city names are presented to the user in an alphabetically-sorted list with section headers.
+    The section header is the "index" of all the cities in the section. By default, the section
+    header is the first character of the city name.
+
+    However, in some languages, cities are listed under an incorrect index.
+
+    Should a city be listed under an incorrect index, the correct index can be manually specified
+    by adding an index to the translation string before the "=" placeholder:
+        <item>[index]<xliff:g id="separator">=</xliff:g>[city name]</item>
+
+        Ex. <item>A<xliff:g id="separator">=</xliff:g>Abidjan</item>
+        Now Abidjan will be classified under the "A" index.
+
+    Note that the separator "=" should NOT be localized. The index can be multi-character; it will
+    consist of all specified characters before the "=" separator.
+
+    This will NOT change the sort order of the cities list. It will solve issues where a city is
+    mistakenly listed under its own index instead of being included in a section immediately
+    before or after its listing.
+    -->
+</resources>
diff --git a/res/values-kab-rDZ/cm_strings.xml b/res/values-kab-rDZ/cm_strings.xml
new file mode 100644
index 000000000..ca974ea7f
--- /dev/null
+++ b/res/values-kab-rDZ/cm_strings.xml
@@ -0,0 +1,31 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--Generated by crowdin.com-->
+<!--
+     Copyright (C) 2012-2015 The CyanogenMod Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+<resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2">
+  <!-- Settings summary for the volume buttons setting. -->
+  <!-- Setting title for the flip action setting. -->
+  <!-- Setting summary for the flip action setting. -->
+  <!-- Setting title for the shake action setting. -->
+  <!-- Setting summary for the shake action setting. -->
+  <!-- Summary texts for shake and flip actions -->
+  <!-- Setting title for accessing the cLock widget settings -->
+  <!-- Setting title for showing/hiding the alarm status bar icon -->
+  <!-- Setting summary for showing/hiding the alarm statusbar icon -->
+  <!-- Setting labels on Set alarm screen: Increasing volume on or off -->
+  <!-- Setting labels on Set alarm screen: Choose profile -->
+  <!-- No profile selected label -->
+</resources>
diff --git a/res/values-kab-rDZ/strings.xml b/res/values-kab-rDZ/strings.xml
new file mode 100644
index 000000000..be004a008
--- /dev/null
+++ b/res/values-kab-rDZ/strings.xml
@@ -0,0 +1,424 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--Generated by crowdin.com-->
+<!-- Copyright (C) 2007 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+<resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2">
+  <!-- -->
+  <!-- Label shown on launcher icon -->
+  <!-- Label for the this application displayed on-screen when this application must be represented to the user. -->
+  <!-- Title for AlarmClock activity -->
+  <!-- Label for the Alarms activity displayed on-screen when that activity must be represented to the user. -->
+  <!-- Menu item on Alarm Clock screen: Add alarm -->
+  <!-- Menu item on Alarm Clock screen: Desk clock -->
+  <!-- Menu item on Alarm Clock screen: Edit alarm -->
+  <!-- Context Menu Item on Alarm Settings screen: Delete alarm -->
+  <!-- Context Menu Item on Alarm Settings screen: Enable alarm -->
+  <!-- Context Menu Item on Alarm Settings screen: Disable alarm -->
+  <!-- Delete alarm confirmation dialog message. -->
+  <!-- Menu item on Alarm Clock screen: Show clock -->
+  <!-- Menu item on Alarm Clock screen: Hide clock -->
+  <!-- Setting label on Set alarm screen: Label -->
+  <!-- Default label to display for an alarm -->
+  <!-- Preference category on Alarm Settings screen: Set alarm -->
+  <!-- Also label for the old Alarms dialog activity displayed on-screen when that activity must be represented to the user. -->
+  <!-- Setting labels on Set alarm screen: Vibration on or off -->
+  <!-- Setting labels on Set alarm screen: Repeat -->
+  <!-- Setting labels on Set alarm screen: Select alarm ringtone  -->
+  <!-- Label on expanded alarm edit view indicating the ringtone is custom. -->
+  <!-- Label on expanded alarm edit view. -->
+  <!-- Setting labels on Set alarm screen: Set time  -->
+  <!-- Label shown when user is setting up non-repeating alarm for tomorrow [CHAR LIMIT=15] -->
+  <!-- Label shown when user is setting up non-repeating alarm for later today [CHAR LIMIT=15] -->
+  <!-- The text shown above the clock when alarm is alerting [CHAR LIMIT=10] -->
+  <!-- The text shown as an option to dismiss an alerting alarm [CHAR LIMIT=5] -->
+  <!-- Button labels on the alarm dialog: Dismiss -->
+  <!-- Button labels on the pre-dismiss alarm notifications: Dismiss now -->
+  <!-- Alarm Alert screen: this message is shown after an alarm rung
+         unattended for a number of minutes.  It tells the user that
+         the alarm has been silenced.-->
+  <!-- The text shown after user snoozed an alerting alarm. The text will be shown
+         together with the number of minutes in two separate lines. For example:
+             Snoozed
+             10 min
+         [CHAR LIMIT=10]
+    -->
+  <!-- The text shown after user snoozed an alerting alarm. The text will be shown
+         together with the word 'Snoozed' in two separate lines or example:
+             Snoozed
+             10 min
+         [CHAR LIMIT=10]
+    -->
+  <!-- The text shown after user dismissed an alerting alarm [CHAR LIMIT=15] -->
+  <!-- Button labels on the alarm dialog: Snooze -->
+  <!-- Toast that appears after Alarm is snoozed from the Alarm
+         dialog. Says the alarm will snooze for xxx minutes.  -->
+  <!-- Text to appear inside a notification while an alarm is snoozing. -->
+  <!-- Text to appear in the notification title while an alarm is about to go off. -->
+  <!-- Text to appear in when trying to view a missed alarm that has been deleted -->
+  <!-- 0: nothing
+         1: days
+         2:      hours
+         3: days hours
+         4:            minutes
+         5: days       minutes
+         6:      hours minutes
+         7: days hours minutes
+    -->
+  <!-- Timer notification: how long from now until timer goes off. -->
+  <!-- Alarm confirmation toast: Describes how long from now until
+         alarm fires -->
+  <!-- Alarm confirmation toast: days -->
+  <!-- Alarm confirmation toast and timer notification: hours -->
+  <!-- Alarm confirmation toast and timer notification: minutes -->
+  <!-- Repeat options that appear under an alarm on main Alarm Clock
+         screen to identify repetition schedule: special case for when
+         the alarm is set to repeat every day -->
+  <!-- Repeat options that appear under an alarm on main Alarm Clock
+         screen to identify repetition schedule: concatenate days with
+         this character, i.e. "Mon, Tue, Wed" -->
+  <!-- Appears at the top of the Clock Picker screen: Tell user to
+         select a clock to display -->
+  <!-- Label for analog clock gadget displayed on-screen when that gadget is represented to the user. -->
+  <!-- Help activity name -->
+  <!-- Settings activity name -->
+  <!-- Label for the Settings activity displayed on-screen when that activity must be represented to the user. -->
+  <!-- Setting title for changing the snooze duration. -->
+  <!-- Auto silence preference title -->
+  <!-- Auto silence summary string set based on the preference value. -->
+  <!-- Auto silence summary when turned off -->
+  <!-- Entries listed in the ListPreference when invoking the auto silence
+         preference. -->
+  <!-- Values that are retrieved from the ListPreference. These must match
+         the auto_silence_entries above. -->
+  <!-- Week start day preference title. -->
+  <!-- Entries listed in ListPreference for start day. -->
+  <!-- Values for ListPreference for start day of week. -->
+  <!-- Done button when editing an alarm. -->
+  <!-- Revert button when editing an alarm. -->
+  <!-- Delete button when editing an alarm. -->
+  <!-- Setting title for changing the alarm volume. -->
+  <!-- Summary for the alarm preference when silent is chosen. -->
+  <!-- Text to display in the small text of the notification -->
+  <!-- Text to display in the notification ticker and label -->
+  <!-- Text to display in the notification when the alarm has been snoozed -->
+  <!-- Title of the setting to change hardware button behavior. This string
+         should be changed for each piece of hardware. [CHAR LIMIT=20] -->
+  <!-- Dialog title of the volume and power setting. -->
+  <!-- Entries listed in the setting for the side-button action. -->
+  <!-- Values for the side-button setting. -->
+  <!-- Title of the ringtone setting. -->
+  <!-- Accessibility labels for Clock activity buttons -->
+  <!-- Accessibility labels for alarm buttons -->
+  <!-- What to show the user if the weather widget exists but fails to
+         respond. This is a sign of an error; if the weather widget is not
+         present on the device, we show nothing at all. -->
+  <!-- A description for the DeskClock alarm sound playback service.
+         [CHAR LIMIT=NONE] -->
+  <!-- String displayed as the alert summary while loading the alert name from
+         the media player. [CHAR LIMIT=NONE] -->
+  <!-- A description for the DeskClock timer sound playback service.
+         [CHAR LIMIT=NONE] -->
+  <!-- Label on the main screen control used to set alarm [CHAR LIMIT=30]-->
+  <!-- Label on the main screen control used to set alarm when there is already an existing alarm [CHAR LIMIT=30]-->
+  <!--  ActionBar strings -->
+  <!-- Describes the purpose of the tab button which which switches the activity to the Alarm page -->
+  <!-- Describes the purpose of the tab button which which switches the activity to the Timer page -->
+  <!-- Describes the purpose of the tab button which which switches the activity to the Clock page -->
+  <!-- Describes the purpose of the tab button which which switches the activity to the Stopwatch page -->
+  <!-- Clock view buttons strings-->
+  <!-- Describes the purpose of the button to start the activity to add/edit/delete alarms -->
+  <!-- Describes the purpose of the button which provides a list of cities for the world clock settings -->
+  <!-- Describes the purpose of the button which pops up a menu of setting choices -->
+  <!-- Menu item on most screens to get to more settings -->
+  <!-- Menu item on most screens to get to the help information -->
+  <!-- Menu item on clock screen to enter night mode. -->
+  <!-- Menu item on Cities screen to sort by GMT offset -->
+  <!-- Menu item on Cities screen to sort by alphabetical order -->
+  <!-- Label for selected cities in Cities list view -->
+  <!-- Stop Watch strings -->
+  <!-- Describes the purpose of the button to resume running a stopwatch -->
+  <!-- Describes the purpose of the button to begin running a stopwatch -->
+  <!-- Describes the purpose of the button to pause a stopwatch. -->
+  <!-- Describes the purpose of the button to record current the stopwatch value into the4 collection of lap times. -->
+  <!-- Describes the purpose of the button to return the stopwatch to zero and remove the lap times. -->
+  <!-- Describes the purpose of the button to share the stopwatch value.
+         Also used as title for chooser when sharing stopwatch results. -->
+  <!-- Abbreviation for temporal hours [CHAR LIMIT=1] -->
+  <!-- Abbreviation for temporal minutes [CHAR LIMIT=1] -->
+  <!-- Abbreviation for temporal seconds [CHAR LIMIT=1] -->
+  <!-- Accessibility strings -->
+  <!--  Stopwatch share strings -->
+  <!-- Sentence within the message created to share the total time recorded within the stopwatch -->
+  <!-- Header within the message created to share a list of lap times (a new line is appended to this) -->
+  <!-- Label to enumerate the number of laps in the notification the user has counted -->
+  <!-- Formatted stopwatch time -->
+  <!-- Formatted stopwatch time for laps shared using the share button -->
+  <!-- Label to enumerate the number of laps the user has counted -->
+  <!-- Stopwatch accessibility strings -->
+  <!-- timer strings -->
+  <!-- Describes the purpose of the button to add a new timer -->
+  <!-- Describes the purpose of the button to begin or continue running a timer -->
+  <!-- Describes the purpose of the button to delete a timer. -->
+  <!-- Talkback description for deleting a number. -->
+  <!-- Describes the purpose of the button increase the remaining time on a timer by one minute. -->
+  <!-- Like "timer_plus_one", but with 'minute' abbreviated for the notification. -->
+  <!-- Describes the purpose of the button to stop the timer. -->
+  <!-- Describes the purpose of the button to stop and delete the timer. -->
+  <!-- Describes the purpose of the button to return the timer to it's original starting value. -->
+  <!-- Describes the purpose of the button to discard the current dialog values. Will also close the dialog if other time's exist -->
+  <!-- Notification content shown when a timer has completed and has no more time remaining -->
+  <!-- Label associated with a notification for a Timer -->
+  <!-- Toast content shown when user attempts to create a new timer when there are already 4 timers -->
+  <!-- Jocular content that user may append when sharing the lap times -->
+  <!-- Title with the clock on the main page displaying the user's regular timezone (shows when automatic_home_clock enabled) -->
+  <!-- Label for the Cities activity displayed on-screen when that activity must be represented to the user. -->
+  <!-- Settings strings -->
+  <!-- Header in the preferences settings for the section pertaining to clocks on the main fragment -->
+  <!-- Header for a Clock Dream Setting referring to choosing analog or digital style -->
+  <!-- Entries listed in the ListPreference when invoking the clock style
+         preference. -->
+  <!-- Values that are retrieved from the ListPreference. These must match
+         the clock_style_entries above. -->
+  <!-- Title for an option that will automtically show a clock representing the user's regular timezone on the main fragment whenever the user leaves their regular timezone-->
+  <!-- Describes the functionality provided by the automatic_home_clock option -->
+  <!-- Title in the preferences change the time zone for the user's home -->
+  <!-- Title in a list dialog box to pick a time zone for the user's home -->
+  <!-- Textual content of the button to discard the current dialog values and close the dialog -->
+  <!-- Textual content of the button to update an alarm with the current dialog values -->
+  <!--  place holder for am/pm label when it is not set -->
+  <!-- add 00 as minutes to the time when pressing this button -->
+  <!-- add 30 as minutes to the time when pressing this button -->
+  <!-- Choices for timezones, must be kept in sync with timezone_values. CHAR LIMIT=25] -->
+  <!-- Choices for timezones, must be kept in sync with timezone_values. -->
+  <!-- Header in the preferences settings for the section pertaining to alarms -->
+  <!-- Describes the running service for the stopwatch -->
+  <!-- Desription for the stopped stop watch -->
+  <!-- Text instruction for dismiss alarm on alarm lock screen. The dismiss button will still
+         be on the right even on RTL languages so please do not reverse this during
+         translation. -->
+  <!-- Text instruction for snooze alarm on alarm lock screen. The snooze button will still
+         be on the left even on RTL languages so please do not reverse this during
+         translation. -->
+  <!-- Text instruction for alarm icon on alarm lock screen. The snooze button will still
+         be on the left even on RTL languages so please do not reverse this during
+         translation. -->
+  <!-- Notification title when timer is stopped. -->
+  <!-- Notification title when multiple timers are stopped. -->
+  <!-- Notification text when multiple timers are stopped. -->
+  <!-- Notification title when at least one timer, of those in use, is counting down. -->
+  <!-- Notification text when at least one timer, of those in use, is counting down. -->
+  <!-- screensaver settings strings -->
+  <!-- Label for the screen saver activity displayed on-screen when that activity must be represented to the user. -->
+  <!-- Title for check box to pick intensity of display diminuation during dream mode -->
+  <!-- Describes intensity of display diminuation during dream mode -->
+  <!-- Description of the down caret in the alarm alert screen to expand the alarm content to edit perspective. [CHAR LIMIT=NONE] -->
+  <!-- Description of the up caret in the alarm alert screen to collapse the alarm content to summary perspective. [CHAR LIMIT=NONE] -->
+  <!-- Description of the button to undo change to alarm -->
+  <!-- Toast content when an alarm was deleted  -->
+  <!-- slash between date and next alarm in the clock -->
+  <!-- slash between date and next alarm in the clock -->
+  <!-- Description of field showing the next alarm time in the clock page, for accessibility. -->
+  <!-- Displays the number of alarms selected from the list of alarms. -->
+  <!-- message used by the talkback accessebility app to say that something was deleted -->
+  <!-- Alarm deletion confirmation message-->
+  <!-- Timer deletion confirmation -->
+  <!-- world clock deletion confirmation -->
+  <!-- Label for digital clock gadget displayed on-screen when that gadget is represented to the user. -->
+  <!-- format strings for clocks -->
+  <!-- Font size for AM/PM should match widget_label_font_size -->
+  <!-- Font size for AM/PM should match bottom_text_size -->
+  <!-- Font size for AM/PM should match label_font_size -->
+  <!-- Font size for AM/PM should match alarm_label_size -->
+  <!-- String for no alarms -->
+  <!-- String for no alarms set [CHAR LIMIT=24] -->
+  <!-- String for no enabled alarms in timeline view [CHAR LIMIT=30] -->
+  <!--
+        String that represents time format for 12-hour time.
+        h represents hour in range (1-12) with the minimum number of digits
+        mm represents minute with leading 0 in case of values < 10
+        a represents am/pm
+        Ex: h:mm a = 12:54 am, 8:05 pm
+    -->
+  <!--
+        String that represents time format for 24-hour time.
+        k represents hour in range (0-23) with the minimum number of digits
+        mm represents minute with leading 0 in case of values < 10
+        Ex: k:mm = 13:51, 5:05
+    -->
+  <!--
+        String that represents weekday, time format for 12-hour time.
+        EEE represents weekday name in short form (ex. Mon, Tue, Wed)
+        h represents hour in range (1-12) with the minimum number of digits
+        mm represents minute with leading 0 in case of values < 10
+        a represents am/pm
+        Ex: EEE, h:mm a = Mon, 2:55 pm
+    -->
+  <!--
+        String that represents weekday, time format for 24-hour time.
+        EEE represents weekday name in short form (ex. Mon, Tue, Wed)
+        k represents hour in range (0-23) with the minimum number of digits
+        mm represents minute with leading 0 in case of values < 10
+        Ex: EEE, k:mm = Mon, 2:55
+    -->
+  <!-- String that represents that invalid time for an alarm was specified, e.g. 23:00am
+     or 27:68pm.
+    First %d represents hour, second %d represents minutes, %s represents am/pm,
+    If no am/pm is passed in (e.g. the locale uses 24h time) only hour and minute are printed.
+    [CHAR LIMIT=NONE]
+    -->
+  <!-- String that represents that no alarm has been specified for a requested hour:minutes.
+    This happens when a user sends a voice command 'dismiss my alarm at 3:00pm' but they have no
+    alarms specified for that time. %s represents the time of the alarm.
+    [CHAR LIMIT=NONE]
+    -->
+  <!-- String that represents that the user doesn't have any alarms scheduled. This happens when
+    a user sends a voice command 'dismiss next alarm' or 'dismiss all of my alarms' but they have
+    no alarms scheduled in the app.
+    [CHAR LIMIT=NONE]
+    -->
+  <!-- String that represents that the user specified that they want to select an alarm to
+    dismiss by specifying a 'label' but they didn't specify any labels.
+    [CHAR LIMIT=NONE]
+    -->
+  <!-- String that represents that no alarm has been specified for a requested label.
+    This happens when a user sends a voice command 'dismiss my alarm with label pick up kids'
+     but they have no alarms with that label.
+    [CHAR LIMIT=NONE]
+    -->
+  <!-- String that represents that the user has sent a voice command 'start a stopwatch' when
+    the stopwatch was already running so the command wasn't executed.
+    [CHAR LIMIT=NONE]
+    -->
+  <!-- String that represents that the user has sent a voice command 'stop the stopwatch' or
+    'lap the stopwatch' when the stopwatch wasn't running so the command wasn't executed.
+    [CHAR LIMIT=NONE]
+    -->
+  <!-- String that represents that the user has sent a voice command 'reset the stopwatch' or
+     when the stopwatch was running so the command wasn't executed.
+    [CHAR LIMIT=NONE]
+    -->
+  <!-- String that represents that the user has successfully sent a voice command stopping
+     the stopwatch.
+    [CHAR LIMIT=NONE]
+    -->
+  <!-- String that represents that the user has successfully sent a voice command resetting
+    the stopwatch.
+    [CHAR LIMIT=NONE]
+    -->
+  <!-- String that represents that the user has successfully sent a voice command lapping
+    the stopwatch.
+    [CHAR LIMIT=NONE]
+    -->
+  <!-- String that represents that the user has successfully sent a voice command starting
+    the stopwatch.
+    [CHAR LIMIT=NONE]
+    -->
+  <!-- String that represents that the user has sent a voice command 'dismiss my alarm at 3pm' when
+    there was no alarm scheduled for that time (they might have had an alarm for 3pm on the list
+    but it was disabled).
+    [CHAR LIMIT=NONE]
+    -->
+  <!-- String that represents that the user has dismissed an alarm through a voice action.
+    %s represents alarm time, e.g. 14:20
+    [CHAR LIMIT=NONE]
+    -->
+  <!-- String that represents that the user has dismissed an alarm through a voice action.
+    %s represents alarm time, e.g. 14:20
+    [CHAR LIMIT=NONE]
+    -->
+  <!-- String that represents that the user attempted to send a voice action 'delete a timer'
+    when there were no timers available.
+    [CHAR LIMIT=NONE]
+    -->
+  <!-- String that represents that the user has successfully deleted a timer through a voice action.
+    [CHAR LIMIT=NONE]
+    -->
+  <!-- String that represents that the user has attempted to start a timer when a timer was
+    already running.
+    [CHAR LIMIT=NONE]
+    -->
+  <!-- String that represents that the user has attempted to start or reset a timer when
+     there were more than 1 timer of desired state in which case it's ambiguous
+     which timer the user meant.
+    [CHAR LIMIT=NONE]
+     -->
+  <!-- String that represents that the user has successfully started a timer through a voice action.
+    [CHAR LIMIT=NONE]
+    -->
+  <!-- String that represents that the user has successfully created a timer through a voice action.
+    [CHAR LIMIT=NONE]
+    -->
+  <!-- String that represents that the user attempted to start a timer through a voice action
+    but specified invalid length.
+    [CHAR LIMIT=NONE]
+    -->
+  <!-- String that represents that the user has successfully reset a timer through a voice action.
+    [CHAR LIMIT=NONE]
+    -->
+  <!-- String that represents that the user attempted to reset a timer through a voice action but
+    the timer wasn't stopped (resetting is only allowed when a timer is stopped).
+    [CHAR LIMIT=NONE]
+    -->
+  <!-- String that represents that the user attempted to stop a timer through a voice action but
+    the timer was already stopped (resetting is only allowed when a timer is stopped).
+    [CHAR LIMIT=NONE]
+    -->
+  <!-- String that represents that the user attempted to add or delete a world clock through
+    a voice action
+    but they didn't specify a city so no world clock was selected.
+    [CHAR LIMIT=NONE]
+    -->
+  <!-- String that represents that the user attempted to add or delete a world clock through
+    a voice action
+    but the city they specified wasn't listed in the database.
+    [CHAR LIMIT=NONE]
+    -->
+  <!-- String that represents that the user attempted to add a world clock through a voice action
+    but the city they specified is already added to the list.
+    [CHAR LIMIT=NONE]
+    -->
+  <!-- String that represents that the user successfully added a world clock through a
+    voice action
+    %s represents the name of the city they added.
+    [CHAR LIMIT=NONE]
+    -->
+  <!-- String that represents that the user successfully deleted a world clock through
+    a voice action
+    %s represents the name of the city they deleted.
+    [CHAR LIMIT=NONE]
+    -->
+  <!-- String that represents that the user attempted to dismiss an alarm that is more than
+    24 hours away
+    %s represents the time of the alarm (e.g. 15:39)
+    [CHAR LIMIT=NONE]
+    -->
+  <!-- String that shows up in the action bar for the Picker Activity
+         where a use gets to pick which alarm to dismiss
+   [CHAR LIMIT=NONE]
+   -->
+  <!-- String that represents that further action is needed from the user in case their
+    voice command was ambiguous or there are more than 1 alarms that match their request.
+    The user needs to choose an alarm they want to dismiss through the UI
+   [CHAR LIMIT=NONE]
+   -->
+  <!-- String that represents that the user doesn't have any alarms firing at the moment.
+    [CHAR LIMIT=NONE]
+    -->
+  <!-- String that represents that the user has snoozed an alarm through a voice action for 10
+    minutes.
+    %s represents alarm time, e.g. 14:20
+    [CHAR LIMIT=NONE]
+    -->
+</resources>
diff --git a/res/values-sc-rIT/array.xml b/res/values-sc-rIT/array.xml
new file mode 100644
index 000000000..c1326001a
--- /dev/null
+++ b/res/values-sc-rIT/array.xml
@@ -0,0 +1,40 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--Generated by crowdin.com-->
+<!--
+    Copyright (C) 2012 The Android Open Source Project
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+         http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License
+  -->
+<resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2">
+  <!--
+    The city names are presented to the user in an alphabetically-sorted list with section headers.
+    The section header is the "index" of all the cities in the section. By default, the section
+    header is the first character of the city name.
+
+    However, in some languages, cities are listed under an incorrect index.
+
+    Should a city be listed under an incorrect index, the correct index can be manually specified
+    by adding an index to the translation string before the "=" placeholder:
+        <item>[index]<xliff:g id="separator">=</xliff:g>[city name]</item>
+
+        Ex. <item>A<xliff:g id="separator">=</xliff:g>Abidjan</item>
+        Now Abidjan will be classified under the "A" index.
+
+    Note that the separator "=" should NOT be localized. The index can be multi-character; it will
+    consist of all specified characters before the "=" separator.
+
+    This will NOT change the sort order of the cities list. It will solve issues where a city is
+    mistakenly listed under its own index instead of being included in a section immediately
+    before or after its listing.
+    -->
+</resources>
diff --git a/res/values-sc-rIT/cm_strings.xml b/res/values-sc-rIT/cm_strings.xml
new file mode 100644
index 000000000..ca974ea7f
--- /dev/null
+++ b/res/values-sc-rIT/cm_strings.xml
@@ -0,0 +1,31 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--Generated by crowdin.com-->
+<!--
+     Copyright (C) 2012-2015 The CyanogenMod Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+<resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2">
+  <!-- Settings summary for the volume buttons setting. -->
+  <!-- Setting title for the flip action setting. -->
+  <!-- Setting summary for the flip action setting. -->
+  <!-- Setting title for the shake action setting. -->
+  <!-- Setting summary for the shake action setting. -->
+  <!-- Summary texts for shake and flip actions -->
+  <!-- Setting title for accessing the cLock widget settings -->
+  <!-- Setting title for showing/hiding the alarm status bar icon -->
+  <!-- Setting summary for showing/hiding the alarm statusbar icon -->
+  <!-- Setting labels on Set alarm screen: Increasing volume on or off -->
+  <!-- Setting labels on Set alarm screen: Choose profile -->
+  <!-- No profile selected label -->
+</resources>
diff --git a/res/values-sc-rIT/strings.xml b/res/values-sc-rIT/strings.xml
new file mode 100644
index 000000000..be004a008
--- /dev/null
+++ b/res/values-sc-rIT/strings.xml
@@ -0,0 +1,424 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--Generated by crowdin.com-->
+<!-- Copyright (C) 2007 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+<resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2">
+  <!-- -->
+  <!-- Label shown on launcher icon -->
+  <!-- Label for the this application displayed on-screen when this application must be represented to the user. -->
+  <!-- Title for AlarmClock activity -->
+  <!-- Label for the Alarms activity displayed on-screen when that activity must be represented to the user. -->
+  <!-- Menu item on Alarm Clock screen: Add alarm -->
+  <!-- Menu item on Alarm Clock screen: Desk clock -->
+  <!-- Menu item on Alarm Clock screen: Edit alarm -->
+  <!-- Context Menu Item on Alarm Settings screen: Delete alarm -->
+  <!-- Context Menu Item on Alarm Settings screen: Enable alarm -->
+  <!-- Context Menu Item on Alarm Settings screen: Disable alarm -->
+  <!-- Delete alarm confirmation dialog message. -->
+  <!-- Menu item on Alarm Clock screen: Show clock -->
+  <!-- Menu item on Alarm Clock screen: Hide clock -->
+  <!-- Setting label on Set alarm screen: Label -->
+  <!-- Default label to display for an alarm -->
+  <!-- Preference category on Alarm Settings screen: Set alarm -->
+  <!-- Also label for the old Alarms dialog activity displayed on-screen when that activity must be represented to the user. -->
+  <!-- Setting labels on Set alarm screen: Vibration on or off -->
+  <!-- Setting labels on Set alarm screen: Repeat -->
+  <!-- Setting labels on Set alarm screen: Select alarm ringtone  -->
+  <!-- Label on expanded alarm edit view indicating the ringtone is custom. -->
+  <!-- Label on expanded alarm edit view. -->
+  <!-- Setting labels on Set alarm screen: Set time  -->
+  <!-- Label shown when user is setting up non-repeating alarm for tomorrow [CHAR LIMIT=15] -->
+  <!-- Label shown when user is setting up non-repeating alarm for later today [CHAR LIMIT=15] -->
+  <!-- The text shown above the clock when alarm is alerting [CHAR LIMIT=10] -->
+  <!-- The text shown as an option to dismiss an alerting alarm [CHAR LIMIT=5] -->
+  <!-- Button labels on the alarm dialog: Dismiss -->
+  <!-- Button labels on the pre-dismiss alarm notifications: Dismiss now -->
+  <!-- Alarm Alert screen: this message is shown after an alarm rung
+         unattended for a number of minutes.  It tells the user that
+         the alarm has been silenced.-->
+  <!-- The text shown after user snoozed an alerting alarm. The text will be shown
+         together with the number of minutes in two separate lines. For example:
+             Snoozed
+             10 min
+         [CHAR LIMIT=10]
+    -->
+  <!-- The text shown after user snoozed an alerting alarm. The text will be shown
+         together with the word 'Snoozed' in two separate lines or example:
+             Snoozed
+             10 min
+         [CHAR LIMIT=10]
+    -->
+  <!-- The text shown after user dismissed an alerting alarm [CHAR LIMIT=15] -->
+  <!-- Button labels on the alarm dialog: Snooze -->
+  <!-- Toast that appears after Alarm is snoozed from the Alarm
+         dialog. Says the alarm will snooze for xxx minutes.  -->
+  <!-- Text to appear inside a notification while an alarm is snoozing. -->
+  <!-- Text to appear in the notification title while an alarm is about to go off. -->
+  <!-- Text to appear in when trying to view a missed alarm that has been deleted -->
+  <!-- 0: nothing
+         1: days
+         2:      hours
+         3: days hours
+         4:            minutes
+         5: days       minutes
+         6:      hours minutes
+         7: days hours minutes
+    -->
+  <!-- Timer notification: how long from now until timer goes off. -->
+  <!-- Alarm confirmation toast: Describes how long from now until
+         alarm fires -->
+  <!-- Alarm confirmation toast: days -->
+  <!-- Alarm confirmation toast and timer notification: hours -->
+  <!-- Alarm confirmation toast and timer notification: minutes -->
+  <!-- Repeat options that appear under an alarm on main Alarm Clock
+         screen to identify repetition schedule: special case for when
+         the alarm is set to repeat every day -->
+  <!-- Repeat options that appear under an alarm on main Alarm Clock
+         screen to identify repetition schedule: concatenate days with
+         this character, i.e. "Mon, Tue, Wed" -->
+  <!-- Appears at the top of the Clock Picker screen: Tell user to
+         select a clock to display -->
+  <!-- Label for analog clock gadget displayed on-screen when that gadget is represented to the user. -->
+  <!-- Help activity name -->
+  <!-- Settings activity name -->
+  <!-- Label for the Settings activity displayed on-screen when that activity must be represented to the user. -->
+  <!-- Setting title for changing the snooze duration. -->
+  <!-- Auto silence preference title -->
+  <!-- Auto silence summary string set based on the preference value. -->
+  <!-- Auto silence summary when turned off -->
+  <!-- Entries listed in the ListPreference when invoking the auto silence
+         preference. -->
+  <!-- Values that are retrieved from the ListPreference. These must match
+         the auto_silence_entries above. -->
+  <!-- Week start day preference title. -->
+  <!-- Entries listed in ListPreference for start day. -->
+  <!-- Values for ListPreference for start day of week. -->
+  <!-- Done button when editing an alarm. -->
+  <!-- Revert button when editing an alarm. -->
+  <!-- Delete button when editing an alarm. -->
+  <!-- Setting title for changing the alarm volume. -->
+  <!-- Summary for the alarm preference when silent is chosen. -->
+  <!-- Text to display in the small text of the notification -->
+  <!-- Text to display in the notification ticker and label -->
+  <!-- Text to display in the notification when the alarm has been snoozed -->
+  <!-- Title of the setting to change hardware button behavior. This string
+         should be changed for each piece of hardware. [CHAR LIMIT=20] -->
+  <!-- Dialog title of the volume and power setting. -->
+  <!-- Entries listed in the setting for the side-button action. -->
+  <!-- Values for the side-button setting. -->
+  <!-- Title of the ringtone setting. -->
+  <!-- Accessibility labels for Clock activity buttons -->
+  <!-- Accessibility labels for alarm buttons -->
+  <!-- What to show the user if the weather widget exists but fails to
+         respond. This is a sign of an error; if the weather widget is not
+         present on the device, we show nothing at all. -->
+  <!-- A description for the DeskClock alarm sound playback service.
+         [CHAR LIMIT=NONE] -->
+  <!-- String displayed as the alert summary while loading the alert name from
+         the media player. [CHAR LIMIT=NONE] -->
+  <!-- A description for the DeskClock timer sound playback service.
+         [CHAR LIMIT=NONE] -->
+  <!-- Label on the main screen control used to set alarm [CHAR LIMIT=30]-->
+  <!-- Label on the main screen control used to set alarm when there is already an existing alarm [CHAR LIMIT=30]-->
+  <!--  ActionBar strings -->
+  <!-- Describes the purpose of the tab button which which switches the activity to the Alarm page -->
+  <!-- Describes the purpose of the tab button which which switches the activity to the Timer page -->
+  <!-- Describes the purpose of the tab button which which switches the activity to the Clock page -->
+  <!-- Describes the purpose of the tab button which which switches the activity to the Stopwatch page -->
+  <!-- Clock view buttons strings-->
+  <!-- Describes the purpose of the button to start the activity to add/edit/delete alarms -->
+  <!-- Describes the purpose of the button which provides a list of cities for the world clock settings -->
+  <!-- Describes the purpose of the button which pops up a menu of setting choices -->
+  <!-- Menu item on most screens to get to more settings -->
+  <!-- Menu item on most screens to get to the help information -->
+  <!-- Menu item on clock screen to enter night mode. -->
+  <!-- Menu item on Cities screen to sort by GMT offset -->
+  <!-- Menu item on Cities screen to sort by alphabetical order -->
+  <!-- Label for selected cities in Cities list view -->
+  <!-- Stop Watch strings -->
+  <!-- Describes the purpose of the button to resume running a stopwatch -->
+  <!-- Describes the purpose of the button to begin running a stopwatch -->
+  <!-- Describes the purpose of the button to pause a stopwatch. -->
+  <!-- Describes the purpose of the button to record current the stopwatch value into the4 collection of lap times. -->
+  <!-- Describes the purpose of the button to return the stopwatch to zero and remove the lap times. -->
+  <!-- Describes the purpose of the button to share the stopwatch value.
+         Also used as title for chooser when sharing stopwatch results. -->
+  <!-- Abbreviation for temporal hours [CHAR LIMIT=1] -->
+  <!-- Abbreviation for temporal minutes [CHAR LIMIT=1] -->
+  <!-- Abbreviation for temporal seconds [CHAR LIMIT=1] -->
+  <!-- Accessibility strings -->
+  <!--  Stopwatch share strings -->
+  <!-- Sentence within the message created to share the total time recorded within the stopwatch -->
+  <!-- Header within the message created to share a list of lap times (a new line is appended to this) -->
+  <!-- Label to enumerate the number of laps in the notification the user has counted -->
+  <!-- Formatted stopwatch time -->
+  <!-- Formatted stopwatch time for laps shared using the share button -->
+  <!-- Label to enumerate the number of laps the user has counted -->
+  <!-- Stopwatch accessibility strings -->
+  <!-- timer strings -->
+  <!-- Describes the purpose of the button to add a new timer -->
+  <!-- Describes the purpose of the button to begin or continue running a timer -->
+  <!-- Describes the purpose of the button to delete a timer. -->
+  <!-- Talkback description for deleting a number. -->
+  <!-- Describes the purpose of the button increase the remaining time on a timer by one minute. -->
+  <!-- Like "timer_plus_one", but with 'minute' abbreviated for the notification. -->
+  <!-- Describes the purpose of the button to stop the timer. -->
+  <!-- Describes the purpose of the button to stop and delete the timer. -->
+  <!-- Describes the purpose of the button to return the timer to it's original starting value. -->
+  <!-- Describes the purpose of the button to discard the current dialog values. Will also close the dialog if other time's exist -->
+  <!-- Notification content shown when a timer has completed and has no more time remaining -->
+  <!-- Label associated with a notification for a Timer -->
+  <!-- Toast content shown when user attempts to create a new timer when there are already 4 timers -->
+  <!-- Jocular content that user may append when sharing the lap times -->
+  <!-- Title with the clock on the main page displaying the user's regular timezone (shows when automatic_home_clock enabled) -->
+  <!-- Label for the Cities activity displayed on-screen when that activity must be represented to the user. -->
+  <!-- Settings strings -->
+  <!-- Header in the preferences settings for the section pertaining to clocks on the main fragment -->
+  <!-- Header for a Clock Dream Setting referring to choosing analog or digital style -->
+  <!-- Entries listed in the ListPreference when invoking the clock style
+         preference. -->
+  <!-- Values that are retrieved from the ListPreference. These must match
+         the clock_style_entries above. -->
+  <!-- Title for an option that will automtically show a clock representing the user's regular timezone on the main fragment whenever the user leaves their regular timezone-->
+  <!-- Describes the functionality provided by the automatic_home_clock option -->
+  <!-- Title in the preferences change the time zone for the user's home -->
+  <!-- Title in a list dialog box to pick a time zone for the user's home -->
+  <!-- Textual content of the button to discard the current dialog values and close the dialog -->
+  <!-- Textual content of the button to update an alarm with the current dialog values -->
+  <!--  place holder for am/pm label when it is not set -->
+  <!-- add 00 as minutes to the time when pressing this button -->
+  <!-- add 30 as minutes to the time when pressing this button -->
+  <!-- Choices for timezones, must be kept in sync with timezone_values. CHAR LIMIT=25] -->
+  <!-- Choices for timezones, must be kept in sync with timezone_values. -->
+  <!-- Header in the preferences settings for the section pertaining to alarms -->
+  <!-- Describes the running service for the stopwatch -->
+  <!-- Desription for the stopped stop watch -->
+  <!-- Text instruction for dismiss alarm on alarm lock screen. The dismiss button will still
+         be on the right even on RTL languages so please do not reverse this during
+         translation. -->
+  <!-- Text instruction for snooze alarm on alarm lock screen. The snooze button will still
+         be on the left even on RTL languages so please do not reverse this during
+         translation. -->
+  <!-- Text instruction for alarm icon on alarm lock screen. The snooze button will still
+         be on the left even on RTL languages so please do not reverse this during
+         translation. -->
+  <!-- Notification title when timer is stopped. -->
+  <!-- Notification title when multiple timers are stopped. -->
+  <!-- Notification text when multiple timers are stopped. -->
+  <!-- Notification title when at least one timer, of those in use, is counting down. -->
+  <!-- Notification text when at least one timer, of those in use, is counting down. -->
+  <!-- screensaver settings strings -->
+  <!-- Label for the screen saver activity displayed on-screen when that activity must be represented to the user. -->
+  <!-- Title for check box to pick intensity of display diminuation during dream mode -->
+  <!-- Describes intensity of display diminuation during dream mode -->
+  <!-- Description of the down caret in the alarm alert screen to expand the alarm content to edit perspective. [CHAR LIMIT=NONE] -->
+  <!-- Description of the up caret in the alarm alert screen to collapse the alarm content to summary perspective. [CHAR LIMIT=NONE] -->
+  <!-- Description of the button to undo change to alarm -->
+  <!-- Toast content when an alarm was deleted  -->
+  <!-- slash between date and next alarm in the clock -->
+  <!-- slash between date and next alarm in the clock -->
+  <!-- Description of field showing the next alarm time in the clock page, for accessibility. -->
+  <!-- Displays the number of alarms selected from the list of alarms. -->
+  <!-- message used by the talkback accessebility app to say that something was deleted -->
+  <!-- Alarm deletion confirmation message-->
+  <!-- Timer deletion confirmation -->
+  <!-- world clock deletion confirmation -->
+  <!-- Label for digital clock gadget displayed on-screen when that gadget is represented to the user. -->
+  <!-- format strings for clocks -->
+  <!-- Font size for AM/PM should match widget_label_font_size -->
+  <!-- Font size for AM/PM should match bottom_text_size -->
+  <!-- Font size for AM/PM should match label_font_size -->
+  <!-- Font size for AM/PM should match alarm_label_size -->
+  <!-- String for no alarms -->
+  <!-- String for no alarms set [CHAR LIMIT=24] -->
+  <!-- String for no enabled alarms in timeline view [CHAR LIMIT=30] -->
+  <!--
+        String that represents time format for 12-hour time.
+        h represents hour in range (1-12) with the minimum number of digits
+        mm represents minute with leading 0 in case of values < 10
+        a represents am/pm
+        Ex: h:mm a = 12:54 am, 8:05 pm
+    -->
+  <!--
+        String that represents time format for 24-hour time.
+        k represents hour in range (0-23) with the minimum number of digits
+        mm represents minute with leading 0 in case of values < 10
+        Ex: k:mm = 13:51, 5:05
+    -->
+  <!--
+        String that represents weekday, time format for 12-hour time.
+        EEE represents weekday name in short form (ex. Mon, Tue, Wed)
+        h represents hour in range (1-12) with the minimum number of digits
+        mm represents minute with leading 0 in case of values < 10
+        a represents am/pm
+        Ex: EEE, h:mm a = Mon, 2:55 pm
+    -->
+  <!--
+        String that represents weekday, time format for 24-hour time.
+        EEE represents weekday name in short form (ex. Mon, Tue, Wed)
+        k represents hour in range (0-23) with the minimum number of digits
+        mm represents minute with leading 0 in case of values < 10
+        Ex: EEE, k:mm = Mon, 2:55
+    -->
+  <!-- String that represents that invalid time for an alarm was specified, e.g. 23:00am
+     or 27:68pm.
+    First %d represents hour, second %d represents minutes, %s represents am/pm,
+    If no am/pm is passed in (e.g. the locale uses 24h time) only hour and minute are printed.
+    [CHAR LIMIT=NONE]
+    -->
+  <!-- String that represents that no alarm has been specified for a requested hour:minutes.
+    This happens when a user sends a voice command 'dismiss my alarm at 3:00pm' but they have no
+    alarms specified for that time. %s represents the time of the alarm.
+    [CHAR LIMIT=NONE]
+    -->
+  <!-- String that represents that the user doesn't have any alarms scheduled. This happens when
+    a user sends a voice command 'dismiss next alarm' or 'dismiss all of my alarms' but they have
+    no alarms scheduled in the app.
+    [CHAR LIMIT=NONE]
+    -->
+  <!-- String that represents that the user specified that they want to select an alarm to
+    dismiss by specifying a 'label' but they didn't specify any labels.
+    [CHAR LIMIT=NONE]
+    -->
+  <!-- String that represents that no alarm has been specified for a requested label.
+    This happens when a user sends a voice command 'dismiss my alarm with label pick up kids'
+     but they have no alarms with that label.
+    [CHAR LIMIT=NONE]
+    -->
+  <!-- String that represents that the user has sent a voice command 'start a stopwatch' when
+    the stopwatch was already running so the command wasn't executed.
+    [CHAR LIMIT=NONE]
+    -->
+  <!-- String that represents that the user has sent a voice command 'stop the stopwatch' or
+    'lap the stopwatch' when the stopwatch wasn't running so the command wasn't executed.
+    [CHAR LIMIT=NONE]
+    -->
+  <!-- String that represents that the user has sent a voice command 'reset the stopwatch' or
+     when the stopwatch was running so the command wasn't executed.
+    [CHAR LIMIT=NONE]
+    -->
+  <!-- String that represents that the user has successfully sent a voice command stopping
+     the stopwatch.
+    [CHAR LIMIT=NONE]
+    -->
+  <!-- String that represents that the user has successfully sent a voice command resetting
+    the stopwatch.
+    [CHAR LIMIT=NONE]
+    -->
+  <!-- String that represents that the user has successfully sent a voice command lapping
+    the stopwatch.
+    [CHAR LIMIT=NONE]
+    -->
+  <!-- String that represents that the user has successfully sent a voice command starting
+    the stopwatch.
+    [CHAR LIMIT=NONE]
+    -->
+  <!-- String that represents that the user has sent a voice command 'dismiss my alarm at 3pm' when
+    there was no alarm scheduled for that time (they might have had an alarm for 3pm on the list
+    but it was disabled).
+    [CHAR LIMIT=NONE]
+    -->
+  <!-- String that represents that the user has dismissed an alarm through a voice action.
+    %s represents alarm time, e.g. 14:20
+    [CHAR LIMIT=NONE]
+    -->
+  <!-- String that represents that the user has dismissed an alarm through a voice action.
+    %s represents alarm time, e.g. 14:20
+    [CHAR LIMIT=NONE]
+    -->
+  <!-- String that represents that the user attempted to send a voice action 'delete a timer'
+    when there were no timers available.
+    [CHAR LIMIT=NONE]
+    -->
+  <!-- String that represents that the user has successfully deleted a timer through a voice action.
+    [CHAR LIMIT=NONE]
+    -->
+  <!-- String that represents that the user has attempted to start a timer when a timer was
+    already running.
+    [CHAR LIMIT=NONE]
+    -->
+  <!-- String that represents that the user has attempted to start or reset a timer when
+     there were more than 1 timer of desired state in which case it's ambiguous
+     which timer the user meant.
+    [CHAR LIMIT=NONE]
+     -->
+  <!-- String that represents that the user has successfully started a timer through a voice action.
+    [CHAR LIMIT=NONE]
+    -->
+  <!-- String that represents that the user has successfully created a timer through a voice action.
+    [CHAR LIMIT=NONE]
+    -->
+  <!-- String that represents that the user attempted to start a timer through a voice action
+    but specified invalid length.
+    [CHAR LIMIT=NONE]
+    -->
+  <!-- String that represents that the user has successfully reset a timer through a voice action.
+    [CHAR LIMIT=NONE]
+    -->
+  <!-- String that represents that the user attempted to reset a timer through a voice action but
+    the timer wasn't stopped (resetting is only allowed when a timer is stopped).
+    [CHAR LIMIT=NONE]
+    -->
+  <!-- String that represents that the user attempted to stop a timer through a voice action but
+    the timer was already stopped (resetting is only allowed when a timer is stopped).
+    [CHAR LIMIT=NONE]
+    -->
+  <!-- String that represents that the user attempted to add or delete a world clock through
+    a voice action
+    but they didn't specify a city so no world clock was selected.
+    [CHAR LIMIT=NONE]
+    -->
+  <!-- String that represents that the user attempted to add or delete a world clock through
+    a voice action
+    but the city they specified wasn't listed in the database.
+    [CHAR LIMIT=NONE]
+    -->
+  <!-- String that represents that the user attempted to add a world clock through a voice action
+    but the city they specified is already added to the list.
+    [CHAR LIMIT=NONE]
+    -->
+  <!-- String that represents that the user successfully added a world clock through a
+    voice action
+    %s represents the name of the city they added.
+    [CHAR LIMIT=NONE]
+    -->
+  <!-- String that represents that the user successfully deleted a world clock through
+    a voice action
+    %s represents the name of the city they deleted.
+    [CHAR LIMIT=NONE]
+    -->
+  <!-- String that represents that the user attempted to dismiss an alarm that is more than
+    24 hours away
+    %s represents the time of the alarm (e.g. 15:39)
+    [CHAR LIMIT=NONE]
+    -->
+  <!-- String that shows up in the action bar for the Picker Activity
+         where a use gets to pick which alarm to dismiss
+   [CHAR LIMIT=NONE]
+   -->
+  <!-- String that represents that further action is needed from the user in case their
+    voice command was ambiguous or there are more than 1 alarms that match their request.
+    The user needs to choose an alarm they want to dismiss through the UI
+   [CHAR LIMIT=NONE]
+   -->
+  <!-- String that represents that the user doesn't have any alarms firing at the moment.
+    [CHAR LIMIT=NONE]
+    -->
+  <!-- String that represents that the user has snoozed an alarm through a voice action for 10
+    minutes.
+    %s represents alarm time, e.g. 14:20
+    [CHAR LIMIT=NONE]
+    -->
+</resources>
diff --git a/res/values-vec-rIT/array.xml b/res/values-vec-rIT/array.xml
new file mode 100644
index 000000000..c1326001a
--- /dev/null
+++ b/res/values-vec-rIT/array.xml
@@ -0,0 +1,40 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--Generated by crowdin.com-->
+<!--
+    Copyright (C) 2012 The Android Open Source Project
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+         http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License
+  -->
+<resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2">
+  <!--
+    The city names are presented to the user in an alphabetically-sorted list with section headers.
+    The section header is the "index" of all the cities in the section. By default, the section
+    header is the first character of the city name.
+
+    However, in some languages, cities are listed under an incorrect index.
+
+    Should a city be listed under an incorrect index, the correct index can be manually specified
+    by adding an index to the translation string before the "=" placeholder:
+        <item>[index]<xliff:g id="separator">=</xliff:g>[city name]</item>
+
+        Ex. <item>A<xliff:g id="separator">=</xliff:g>Abidjan</item>
+        Now Abidjan will be classified under the "A" index.
+
+    Note that the separator "=" should NOT be localized. The index can be multi-character; it will
+    consist of all specified characters before the "=" separator.
+
+    This will NOT change the sort order of the cities list. It will solve issues where a city is
+    mistakenly listed under its own index instead of being included in a section immediately
+    before or after its listing.
+    -->
+</resources>
diff --git a/res/values-vec-rIT/cm_strings.xml b/res/values-vec-rIT/cm_strings.xml
new file mode 100644
index 000000000..ca974ea7f
--- /dev/null
+++ b/res/values-vec-rIT/cm_strings.xml
@@ -0,0 +1,31 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--Generated by crowdin.com-->
+<!--
+     Copyright (C) 2012-2015 The CyanogenMod Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+<resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2">
+  <!-- Settings summary for the volume buttons setting. -->
+  <!-- Setting title for the flip action setting. -->
+  <!-- Setting summary for the flip action setting. -->
+  <!-- Setting title for the shake action setting. -->
+  <!-- Setting summary for the shake action setting. -->
+  <!-- Summary texts for shake and flip actions -->
+  <!-- Setting title for accessing the cLock widget settings -->
+  <!-- Setting title for showing/hiding the alarm status bar icon -->
+  <!-- Setting summary for showing/hiding the alarm statusbar icon -->
+  <!-- Setting labels on Set alarm screen: Increasing volume on or off -->
+  <!-- Setting labels on Set alarm screen: Choose profile -->
+  <!-- No profile selected label -->
+</resources>
diff --git a/res/values-vec-rIT/strings.xml b/res/values-vec-rIT/strings.xml
new file mode 100644
index 000000000..be004a008
--- /dev/null
+++ b/res/values-vec-rIT/strings.xml
@@ -0,0 +1,424 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--Generated by crowdin.com-->
+<!-- Copyright (C) 2007 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+<resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2">
+  <!-- -->
+  <!-- Label shown on launcher icon -->
+  <!-- Label for the this application displayed on-screen when this application must be represented to the user. -->
+  <!-- Title for AlarmClock activity -->
+  <!-- Label for the Alarms activity displayed on-screen when that activity must be represented to the user. -->
+  <!-- Menu item on Alarm Clock screen: Add alarm -->
+  <!-- Menu item on Alarm Clock screen: Desk clock -->
+  <!-- Menu item on Alarm Clock screen: Edit alarm -->
+  <!-- Context Menu Item on Alarm Settings screen: Delete alarm -->
+  <!-- Context Menu Item on Alarm Settings screen: Enable alarm -->
+  <!-- Context Menu Item on Alarm Settings screen: Disable alarm -->
+  <!-- Delete alarm confirmation dialog message. -->
+  <!-- Menu item on Alarm Clock screen: Show clock -->
+  <!-- Menu item on Alarm Clock screen: Hide clock -->
+  <!-- Setting label on Set alarm screen: Label -->
+  <!-- Default label to display for an alarm -->
+  <!-- Preference category on Alarm Settings screen: Set alarm -->
+  <!-- Also label for the old Alarms dialog activity displayed on-screen when that activity must be represented to the user. -->
+  <!-- Setting labels on Set alarm screen: Vibration on or off -->
+  <!-- Setting labels on Set alarm screen: Repeat -->
+  <!-- Setting labels on Set alarm screen: Select alarm ringtone  -->
+  <!-- Label on expanded alarm edit view indicating the ringtone is custom. -->
+  <!-- Label on expanded alarm edit view. -->
+  <!-- Setting labels on Set alarm screen: Set time  -->
+  <!-- Label shown when user is setting up non-repeating alarm for tomorrow [CHAR LIMIT=15] -->
+  <!-- Label shown when user is setting up non-repeating alarm for later today [CHAR LIMIT=15] -->
+  <!-- The text shown above the clock when alarm is alerting [CHAR LIMIT=10] -->
+  <!-- The text shown as an option to dismiss an alerting alarm [CHAR LIMIT=5] -->
+  <!-- Button labels on the alarm dialog: Dismiss -->
+  <!-- Button labels on the pre-dismiss alarm notifications: Dismiss now -->
+  <!-- Alarm Alert screen: this message is shown after an alarm rung
+         unattended for a number of minutes.  It tells the user that
+         the alarm has been silenced.-->
+  <!-- The text shown after user snoozed an alerting alarm. The text will be shown
+         together with the number of minutes in two separate lines. For example:
+             Snoozed
+             10 min
+         [CHAR LIMIT=10]
+    -->
+  <!-- The text shown after user snoozed an alerting alarm. The text will be shown
+         together with the word 'Snoozed' in two separate lines or example:
+             Snoozed
+             10 min
+         [CHAR LIMIT=10]
+    -->
+  <!-- The text shown after user dismissed an alerting alarm [CHAR LIMIT=15] -->
+  <!-- Button labels on the alarm dialog: Snooze -->
+  <!-- Toast that appears after Alarm is snoozed from the Alarm
+         dialog. Says the alarm will snooze for xxx minutes.  -->
+  <!-- Text to appear inside a notification while an alarm is snoozing. -->
+  <!-- Text to appear in the notification title while an alarm is about to go off. -->
+  <!-- Text to appear in when trying to view a missed alarm that has been deleted -->
+  <!-- 0: nothing
+         1: days
+         2:      hours
+         3: days hours
+         4:            minutes
+         5: days       minutes
+         6:      hours minutes
+         7: days hours minutes
+    -->
+  <!-- Timer notification: how long from now until timer goes off. -->
+  <!-- Alarm confirmation toast: Describes how long from now until
+         alarm fires -->
+  <!-- Alarm confirmation toast: days -->
+  <!-- Alarm confirmation toast and timer notification: hours -->
+  <!-- Alarm confirmation toast and timer notification: minutes -->
+  <!-- Repeat options that appear under an alarm on main Alarm Clock
+         screen to identify repetition schedule: special case for when
+         the alarm is set to repeat every day -->
+  <!-- Repeat options that appear under an alarm on main Alarm Clock
+         screen to identify repetition schedule: concatenate days with
+         this character, i.e. "Mon, Tue, Wed" -->
+  <!-- Appears at the top of the Clock Picker screen: Tell user to
+         select a clock to display -->
+  <!-- Label for analog clock gadget displayed on-screen when that gadget is represented to the user. -->
+  <!-- Help activity name -->
+  <!-- Settings activity name -->
+  <!-- Label for the Settings activity displayed on-screen when that activity must be represented to the user. -->
+  <!-- Setting title for changing the snooze duration. -->
+  <!-- Auto silence preference title -->
+  <!-- Auto silence summary string set based on the preference value. -->
+  <!-- Auto silence summary when turned off -->
+  <!-- Entries listed in the ListPreference when invoking the auto silence
+         preference. -->
+  <!-- Values that are retrieved from the ListPreference. These must match
+         the auto_silence_entries above. -->
+  <!-- Week start day preference title. -->
+  <!-- Entries listed in ListPreference for start day. -->
+  <!-- Values for ListPreference for start day of week. -->
+  <!-- Done button when editing an alarm. -->
+  <!-- Revert button when editing an alarm. -->
+  <!-- Delete button when editing an alarm. -->
+  <!-- Setting title for changing the alarm volume. -->
+  <!-- Summary for the alarm preference when silent is chosen. -->
+  <!-- Text to display in the small text of the notification -->
+  <!-- Text to display in the notification ticker and label -->
+  <!-- Text to display in the notification when the alarm has been snoozed -->
+  <!-- Title of the setting to change hardware button behavior. This string
+         should be changed for each piece of hardware. [CHAR LIMIT=20] -->
+  <!-- Dialog title of the volume and power setting. -->
+  <!-- Entries listed in the setting for the side-button action. -->
+  <!-- Values for the side-button setting. -->
+  <!-- Title of the ringtone setting. -->
+  <!-- Accessibility labels for Clock activity buttons -->
+  <!-- Accessibility labels for alarm buttons -->
+  <!-- What to show the user if the weather widget exists but fails to
+         respond. This is a sign of an error; if the weather widget is not
+         present on the device, we show nothing at all. -->
+  <!-- A description for the DeskClock alarm sound playback service.
+         [CHAR LIMIT=NONE] -->
+  <!-- String displayed as the alert summary while loading the alert name from
+         the media player. [CHAR LIMIT=NONE] -->
+  <!-- A description for the DeskClock timer sound playback service.
+         [CHAR LIMIT=NONE] -->
+  <!-- Label on the main screen control used to set alarm [CHAR LIMIT=30]-->
+  <!-- Label on the main screen control used to set alarm when there is already an existing alarm [CHAR LIMIT=30]-->
+  <!--  ActionBar strings -->
+  <!-- Describes the purpose of the tab button which which switches the activity to the Alarm page -->
+  <!-- Describes the purpose of the tab button which which switches the activity to the Timer page -->
+  <!-- Describes the purpose of the tab button which which switches the activity to the Clock page -->
+  <!-- Describes the purpose of the tab button which which switches the activity to the Stopwatch page -->
+  <!-- Clock view buttons strings-->
+  <!-- Describes the purpose of the button to start the activity to add/edit/delete alarms -->
+  <!-- Describes the purpose of the button which provides a list of cities for the world clock settings -->
+  <!-- Describes the purpose of the button which pops up a menu of setting choices -->
+  <!-- Menu item on most screens to get to more settings -->
+  <!-- Menu item on most screens to get to the help information -->
+  <!-- Menu item on clock screen to enter night mode. -->
+  <!-- Menu item on Cities screen to sort by GMT offset -->
+  <!-- Menu item on Cities screen to sort by alphabetical order -->
+  <!-- Label for selected cities in Cities list view -->
+  <!-- Stop Watch strings -->
+  <!-- Describes the purpose of the button to resume running a stopwatch -->
+  <!-- Describes the purpose of the button to begin running a stopwatch -->
+  <!-- Describes the purpose of the button to pause a stopwatch. -->
+  <!-- Describes the purpose of the button to record current the stopwatch value into the4 collection of lap times. -->
+  <!-- Describes the purpose of the button to return the stopwatch to zero and remove the lap times. -->
+  <!-- Describes the purpose of the button to share the stopwatch value.
+         Also used as title for chooser when sharing stopwatch results. -->
+  <!-- Abbreviation for temporal hours [CHAR LIMIT=1] -->
+  <!-- Abbreviation for temporal minutes [CHAR LIMIT=1] -->
+  <!-- Abbreviation for temporal seconds [CHAR LIMIT=1] -->
+  <!-- Accessibility strings -->
+  <!--  Stopwatch share strings -->
+  <!-- Sentence within the message created to share the total time recorded within the stopwatch -->
+  <!-- Header within the message created to share a list of lap times (a new line is appended to this) -->
+  <!-- Label to enumerate the number of laps in the notification the user has counted -->
+  <!-- Formatted stopwatch time -->
+  <!-- Formatted stopwatch time for laps shared using the share button -->
+  <!-- Label to enumerate the number of laps the user has counted -->
+  <!-- Stopwatch accessibility strings -->
+  <!-- timer strings -->
+  <!-- Describes the purpose of the button to add a new timer -->
+  <!-- Describes the purpose of the button to begin or continue running a timer -->
+  <!-- Describes the purpose of the button to delete a timer. -->
+  <!-- Talkback description for deleting a number. -->
+  <!-- Describes the purpose of the button increase the remaining time on a timer by one minute. -->
+  <!-- Like "timer_plus_one", but with 'minute' abbreviated for the notification. -->
+  <!-- Describes the purpose of the button to stop the timer. -->
+  <!-- Describes the purpose of the button to stop and delete the timer. -->
+  <!-- Describes the purpose of the button to return the timer to it's original starting value. -->
+  <!-- Describes the purpose of the button to discard the current dialog values. Will also close the dialog if other time's exist -->
+  <!-- Notification content shown when a timer has completed and has no more time remaining -->
+  <!-- Label associated with a notification for a Timer -->
+  <!-- Toast content shown when user attempts to create a new timer when there are already 4 timers -->
+  <!-- Jocular content that user may append when sharing the lap times -->
+  <!-- Title with the clock on the main page displaying the user's regular timezone (shows when automatic_home_clock enabled) -->
+  <!-- Label for the Cities activity displayed on-screen when that activity must be represented to the user. -->
+  <!-- Settings strings -->
+  <!-- Header in the preferences settings for the section pertaining to clocks on the main fragment -->
+  <!-- Header for a Clock Dream Setting referring to choosing analog or digital style -->
+  <!-- Entries listed in the ListPreference when invoking the clock style
+         preference. -->
+  <!-- Values that are retrieved from the ListPreference. These must match
+         the clock_style_entries above. -->
+  <!-- Title for an option that will automtically show a clock representing the user's regular timezone on the main fragment whenever the user leaves their regular timezone-->
+  <!-- Describes the functionality provided by the automatic_home_clock option -->
+  <!-- Title in the preferences change the time zone for the user's home -->
+  <!-- Title in a list dialog box to pick a time zone for the user's home -->
+  <!-- Textual content of the button to discard the current dialog values and close the dialog -->
+  <!-- Textual content of the button to update an alarm with the current dialog values -->
+  <!--  place holder for am/pm label when it is not set -->
+  <!-- add 00 as minutes to the time when pressing this button -->
+  <!-- add 30 as minutes to the time when pressing this button -->
+  <!-- Choices for timezones, must be kept in sync with timezone_values. CHAR LIMIT=25] -->
+  <!-- Choices for timezones, must be kept in sync with timezone_values. -->
+  <!-- Header in the preferences settings for the section pertaining to alarms -->
+  <!-- Describes the running service for the stopwatch -->
+  <!-- Desription for the stopped stop watch -->
+  <!-- Text instruction for dismiss alarm on alarm lock screen. The dismiss button will still
+         be on the right even on RTL languages so please do not reverse this during
+         translation. -->
+  <!-- Text instruction for snooze alarm on alarm lock screen. The snooze button will still
+         be on the left even on RTL languages so please do not reverse this during
+         translation. -->
+  <!-- Text instruction for alarm icon on alarm lock screen. The snooze button will still
+         be on the left even on RTL languages so please do not reverse this during
+         translation. -->
+  <!-- Notification title when timer is stopped. -->
+  <!-- Notification title when multiple timers are stopped. -->
+  <!-- Notification text when multiple timers are stopped. -->
+  <!-- Notification title when at least one timer, of those in use, is counting down. -->
+  <!-- Notification text when at least one timer, of those in use, is counting down. -->
+  <!-- screensaver settings strings -->
+  <!-- Label for the screen saver activity displayed on-screen when that activity must be represented to the user. -->
+  <!-- Title for check box to pick intensity of display diminuation during dream mode -->
+  <!-- Describes intensity of display diminuation during dream mode -->
+  <!-- Description of the down caret in the alarm alert screen to expand the alarm content to edit perspective. [CHAR LIMIT=NONE] -->
+  <!-- Description of the up caret in the alarm alert screen to collapse the alarm content to summary perspective. [CHAR LIMIT=NONE] -->
+  <!-- Description of the button to undo change to alarm -->
+  <!-- Toast content when an alarm was deleted  -->
+  <!-- slash between date and next alarm in the clock -->
+  <!-- slash between date and next alarm in the clock -->
+  <!-- Description of field showing the next alarm time in the clock page, for accessibility. -->
+  <!-- Displays the number of alarms selected from the list of alarms. -->
+  <!-- message used by the talkback accessebility app to say that something was deleted -->
+  <!-- Alarm deletion confirmation message-->
+  <!-- Timer deletion confirmation -->
+  <!-- world clock deletion confirmation -->
+  <!-- Label for digital clock gadget displayed on-screen when that gadget is represented to the user. -->
+  <!-- format strings for clocks -->
+  <!-- Font size for AM/PM should match widget_label_font_size -->
+  <!-- Font size for AM/PM should match bottom_text_size -->
+  <!-- Font size for AM/PM should match label_font_size -->
+  <!-- Font size for AM/PM should match alarm_label_size -->
+  <!-- String for no alarms -->
+  <!-- String for no alarms set [CHAR LIMIT=24] -->
+  <!-- String for no enabled alarms in timeline view [CHAR LIMIT=30] -->
+  <!--
+        String that represents time format for 12-hour time.
+        h represents hour in range (1-12) with the minimum number of digits
+        mm represents minute with leading 0 in case of values < 10
+        a represents am/pm
+        Ex: h:mm a = 12:54 am, 8:05 pm
+    -->
+  <!--
+        String that represents time format for 24-hour time.
+        k represents hour in range (0-23) with the minimum number of digits
+        mm represents minute with leading 0 in case of values < 10
+        Ex: k:mm = 13:51, 5:05
+    -->
+  <!--
+        String that represents weekday, time format for 12-hour time.
+        EEE represents weekday name in short form (ex. Mon, Tue, Wed)
+        h represents hour in range (1-12) with the minimum number of digits
+        mm represents minute with leading 0 in case of values < 10
+        a represents am/pm
+        Ex: EEE, h:mm a = Mon, 2:55 pm
+    -->
+  <!--
+        String that represents weekday, time format for 24-hour time.
+        EEE represents weekday name in short form (ex. Mon, Tue, Wed)
+        k represents hour in range (0-23) with the minimum number of digits
+        mm represents minute with leading 0 in case of values < 10
+        Ex: EEE, k:mm = Mon, 2:55
+    -->
+  <!-- String that represents that invalid time for an alarm was specified, e.g. 23:00am
+     or 27:68pm.
+    First %d represents hour, second %d represents minutes, %s represents am/pm,
+    If no am/pm is passed in (e.g. the locale uses 24h time) only hour and minute are printed.
+    [CHAR LIMIT=NONE]
+    -->
+  <!-- String that represents that no alarm has been specified for a requested hour:minutes.
+    This happens when a user sends a voice command 'dismiss my alarm at 3:00pm' but they have no
+    alarms specified for that time. %s represents the time of the alarm.
+    [CHAR LIMIT=NONE]
+    -->
+  <!-- String that represents that the user doesn't have any alarms scheduled. This happens when
+    a user sends a voice command 'dismiss next alarm' or 'dismiss all of my alarms' but they have
+    no alarms scheduled in the app.
+    [CHAR LIMIT=NONE]
+    -->
+  <!-- String that represents that the user specified that they want to select an alarm to
+    dismiss by specifying a 'label' but they didn't specify any labels.
+    [CHAR LIMIT=NONE]
+    -->
+  <!-- String that represents that no alarm has been specified for a requested label.
+    This happens when a user sends a voice command 'dismiss my alarm with label pick up kids'
+     but they have no alarms with that label.
+    [CHAR LIMIT=NONE]
+    -->
+  <!-- String that represents that the user has sent a voice command 'start a stopwatch' when
+    the stopwatch was already running so the command wasn't executed.
+    [CHAR LIMIT=NONE]
+    -->
+  <!-- String that represents that the user has sent a voice command 'stop the stopwatch' or
+    'lap the stopwatch' when the stopwatch wasn't running so the command wasn't executed.
+    [CHAR LIMIT=NONE]
+    -->
+  <!-- String that represents that the user has sent a voice command 'reset the stopwatch' or
+     when the stopwatch was running so the command wasn't executed.
+    [CHAR LIMIT=NONE]
+    -->
+  <!-- String that represents that the user has successfully sent a voice command stopping
+     the stopwatch.
+    [CHAR LIMIT=NONE]
+    -->
+  <!-- String that represents that the user has successfully sent a voice command resetting
+    the stopwatch.
+    [CHAR LIMIT=NONE]
+    -->
+  <!-- String that represents that the user has successfully sent a voice command lapping
+    the stopwatch.
+    [CHAR LIMIT=NONE]
+    -->
+  <!-- String that represents that the user has successfully sent a voice command starting
+    the stopwatch.
+    [CHAR LIMIT=NONE]
+    -->
+  <!-- String that represents that the user has sent a voice command 'dismiss my alarm at 3pm' when
+    there was no alarm scheduled for that time (they might have had an alarm for 3pm on the list
+    but it was disabled).
+    [CHAR LIMIT=NONE]
+    -->
+  <!-- String that represents that the user has dismissed an alarm through a voice action.
+    %s represents alarm time, e.g. 14:20
+    [CHAR LIMIT=NONE]
+    -->
+  <!-- String that represents that the user has dismissed an alarm through a voice action.
+    %s represents alarm time, e.g. 14:20
+    [CHAR LIMIT=NONE]
+    -->
+  <!-- String that represents that the user attempted to send a voice action 'delete a timer'
+    when there were no timers available.
+    [CHAR LIMIT=NONE]
+    -->
+  <!-- String that represents that the user has successfully deleted a timer through a voice action.
+    [CHAR LIMIT=NONE]
+    -->
+  <!-- String that represents that the user has attempted to start a timer when a timer was
+    already running.
+    [CHAR LIMIT=NONE]
+    -->
+  <!-- String that represents that the user has attempted to start or reset a timer when
+     there were more than 1 timer of desired state in which case it's ambiguous
+     which timer the user meant.
+    [CHAR LIMIT=NONE]
+     -->
+  <!-- String that represents that the user has successfully started a timer through a voice action.
+    [CHAR LIMIT=NONE]
+    -->
+  <!-- String that represents that the user has successfully created a timer through a voice action.
+    [CHAR LIMIT=NONE]
+    -->
+  <!-- String that represents that the user attempted to start a timer through a voice action
+    but specified invalid length.
+    [CHAR LIMIT=NONE]
+    -->
+  <!-- String that represents that the user has successfully reset a timer through a voice action.
+    [CHAR LIMIT=NONE]
+    -->
+  <!-- String that represents that the user attempted to reset a timer through a voice action but
+    the timer wasn't stopped (resetting is only allowed when a timer is stopped).
+    [CHAR LIMIT=NONE]
+    -->
+  <!-- String that represents that the user attempted to stop a timer through a voice action but
+    the timer was already stopped (resetting is only allowed when a timer is stopped).
+    [CHAR LIMIT=NONE]
+    -->
+  <!-- String that represents that the user attempted to add or delete a world clock through
+    a voice action
+    but they didn't specify a city so no world clock was selected.
+    [CHAR LIMIT=NONE]
+    -->
+  <!-- String that represents that the user attempted to add or delete a world clock through
+    a voice action
+    but the city they specified wasn't listed in the database.
+    [CHAR LIMIT=NONE]
+    -->
+  <!-- String that represents that the user attempted to add a world clock through a voice action
+    but the city they specified is already added to the list.
+    [CHAR LIMIT=NONE]
+    -->
+  <!-- String that represents that the user successfully added a world clock through a
+    voice action
+    %s represents the name of the city they added.
+    [CHAR LIMIT=NONE]
+    -->
+  <!-- String that represents that the user successfully deleted a world clock through
+    a voice action
+    %s represents the name of the city they deleted.
+    [CHAR LIMIT=NONE]
+    -->
+  <!-- String that represents that the user attempted to dismiss an alarm that is more than
+    24 hours away
+    %s represents the time of the alarm (e.g. 15:39)
+    [CHAR LIMIT=NONE]
+    -->
+  <!-- String that shows up in the action bar for the Picker Activity
+         where a use gets to pick which alarm to dismiss
+   [CHAR LIMIT=NONE]
+   -->
+  <!-- String that represents that further action is needed from the user in case their
+    voice command was ambiguous or there are more than 1 alarms that match their request.
+    The user needs to choose an alarm they want to dismiss through the UI
+   [CHAR LIMIT=NONE]
+   -->
+  <!-- String that represents that the user doesn't have any alarms firing at the moment.
+    [CHAR LIMIT=NONE]
+    -->
+  <!-- String that represents that the user has snoozed an alarm through a voice action for 10
+    minutes.
+    %s represents alarm time, e.g. 14:20
+    [CHAR LIMIT=NONE]
+    -->
+</resources>
-- 
cgit v1.2.3