/******************************************************************************
 *
 *  Copyright (C) 1999-2012 Broadcom Corporation
 *
 *  Licensed under the Apache License, Version 2.0 (the "License");
 *  you may not use this file except in compliance with the License.
 *  You may obtain a copy of the License at:
 *
 *  http://www.apache.org/licenses/LICENSE-2.0
 *
 *  Unless required by applicable law or agreed to in writing, software
 *  distributed under the License is distributed on an "AS IS" BASIS,
 *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 *  See the License for the specific language governing permissions and
 *  limitations under the License.
 *
 ******************************************************************************/
#include "_OverrideLog.h"

#include <android/hardware/nfc/1.0/INfc.h>
#include <android/hardware/nfc/1.0/INfcClientCallback.h>
#include <hwbinder/ProcessState.h>
#include <pthread.h>
#include "NfcAdaptation.h"
#include "debug_nfcsnoop.h"
#include "nfc_target.h"

extern "C" {
#include "gki.h"
#include "nfa_api.h"
#include "nfc_int.h"
#include "vendor_cfg.h"
}
#include "android_logmsg.h"
#include "config.h"

#undef LOG_TAG
#define LOG_TAG "NfcAdaptation"

using android::OK;
using android::sp;
using android::status_t;

using android::hardware::ProcessState;
using android::hardware::Return;
using android::hardware::Void;
using android::hardware::nfc::V1_0::INfc;
using android::hardware::nfc::V1_0::INfcClientCallback;
using android::hardware::hidl_vec;

extern "C" void GKI_shutdown();
extern void resetConfig();
extern "C" void verify_stack_non_volatile_store();
extern "C" void delete_stack_non_volatile_store(bool forceDelete);

NfcAdaptation* NfcAdaptation::mpInstance = NULL;
ThreadMutex NfcAdaptation::sLock;
tHAL_NFC_CBACK* NfcAdaptation::mHalCallback = NULL;
tHAL_NFC_DATA_CBACK* NfcAdaptation::mHalDataCallback = NULL;
ThreadCondVar NfcAdaptation::mHalOpenCompletedEvent;
ThreadCondVar NfcAdaptation::mHalCloseCompletedEvent;
sp<INfc> NfcAdaptation::mHal;
INfcClientCallback* NfcAdaptation::mCallback;

uint32_t ScrProtocolTraceFlag = SCR_PROTO_TRACE_ALL;  // 0x017F00;
uint8_t appl_trace_level = 0xff;
char bcm_nfc_location[120];

static uint8_t nfa_dm_cfg[sizeof(tNFA_DM_CFG)];
static uint8_t nfa_proprietary_cfg[sizeof(tNFA_PROPRIETARY_CFG)];
extern tNFA_DM_CFG* p_nfa_dm_cfg;
extern tNFA_PROPRIETARY_CFG* p_nfa_proprietary_cfg;
extern uint8_t nfa_ee_max_ee_cfg;
extern const uint8_t nfca_version_string[];
extern const uint8_t nfa_version_string[];
static uint8_t deviceHostWhiteList[NFA_HCI_MAX_HOST_IN_NETWORK];
static tNFA_HCI_CFG jni_nfa_hci_cfg;
extern tNFA_HCI_CFG* p_nfa_hci_cfg;
extern bool nfa_poll_bail_out_mode;

class NfcClientCallback : public INfcClientCallback {
 public:
  NfcClientCallback(tHAL_NFC_CBACK* eventCallback,
                    tHAL_NFC_DATA_CBACK dataCallback) {
    mEventCallback = eventCallback;
    mDataCallback = dataCallback;
  };
  virtual ~NfcClientCallback() = default;
  Return<void> sendEvent(
      ::android::hardware::nfc::V1_0::NfcEvent event,
      ::android::hardware::nfc::V1_0::NfcStatus event_status) override {
    mEventCallback((uint8_t)event, (tHAL_NFC_STATUS)event_status);
    return Void();
  };
  Return<void> sendData(
      const ::android::hardware::nfc::V1_0::NfcData& data) override {
    ::android::hardware::nfc::V1_0::NfcData copy = data;
    mDataCallback(copy.size(), &copy[0]);
    return Void();
  };

 private:
  tHAL_NFC_CBACK* mEventCallback;
  tHAL_NFC_DATA_CBACK* mDataCallback;
};

/*******************************************************************************
**
** Function:    NfcAdaptation::NfcAdaptation()
**
** Description: class constructor
**
** Returns:     none
**
*******************************************************************************/
NfcAdaptation::NfcAdaptation() {
  memset(&mHalEntryFuncs, 0, sizeof(mHalEntryFuncs));
}

/*******************************************************************************
**
** Function:    NfcAdaptation::~NfcAdaptation()
**
** Description: class destructor
**
** Returns:     none
**
*******************************************************************************/
NfcAdaptation::~NfcAdaptation() { mpInstance = NULL; }

/*******************************************************************************
**
** Function:    NfcAdaptation::GetInstance()
**
** Description: access class singleton
**
** Returns:     pointer to the singleton object
**
*******************************************************************************/
NfcAdaptation& NfcAdaptation::GetInstance() {
  AutoThreadMutex a(sLock);

  if (!mpInstance) mpInstance = new NfcAdaptation;
  return *mpInstance;
}

/*******************************************************************************
**
** Function:    NfcAdaptation::Initialize()
**
** Description: class initializer
**
** Returns:     none
**
*******************************************************************************/
void NfcAdaptation::Initialize() {
  const char* func = "NfcAdaptation::Initialize";
  ALOGD("%s: enter", func);
  ALOGE("%s: ver=%s nfa=%s", func, nfca_version_string, nfa_version_string);
  unsigned long num;

  if (GetNumValue(NAME_USE_RAW_NCI_TRACE, &num, sizeof(num))) {
    if (num == 1) {
      // display protocol traces in raw format
      ProtoDispAdapterUseRawOutput(TRUE);
      ALOGD("%s: logging protocol in raw format", func);
    }
  }
  if (!GetStrValue(NAME_NFA_STORAGE, bcm_nfc_location,
                   sizeof(bcm_nfc_location))) {
    strlcpy(bcm_nfc_location, "/data/nfc", sizeof(bcm_nfc_location));
  }

  initializeProtocolLogLevel();

  if (GetStrValue(NAME_NFA_DM_CFG, (char*)nfa_dm_cfg, sizeof(nfa_dm_cfg)))
    p_nfa_dm_cfg = (tNFA_DM_CFG*)&nfa_dm_cfg[0];

  if (GetNumValue(NAME_NFA_MAX_EE_SUPPORTED, &num, sizeof(num))) {
    nfa_ee_max_ee_cfg = num;
    ALOGD("%s: Overriding NFA_EE_MAX_EE_SUPPORTED to use %d", func,
          nfa_ee_max_ee_cfg);
  }
  if (GetNumValue(NAME_NFA_POLL_BAIL_OUT_MODE, &num, sizeof(num))) {
    nfa_poll_bail_out_mode = num;
    ALOGD("%s: Overriding NFA_POLL_BAIL_OUT_MODE to use %d", func,
          nfa_poll_bail_out_mode);
  }

  if (GetStrValue(NAME_NFA_PROPRIETARY_CFG, (char*)nfa_proprietary_cfg,
                  sizeof(tNFA_PROPRIETARY_CFG))) {
    p_nfa_proprietary_cfg = (tNFA_PROPRIETARY_CFG*)&nfa_proprietary_cfg[0];
  }

  // configure device host whitelist of HCI host ID's; see specification ETSI TS
  // 102 622 V11.1.10
  //(2012-10), section 6.1.3.1
  num = GetStrValue(NAME_DEVICE_HOST_WHITE_LIST, (char*)deviceHostWhiteList,
                    sizeof(deviceHostWhiteList));
  if (num) {
    memmove(&jni_nfa_hci_cfg, p_nfa_hci_cfg, sizeof(jni_nfa_hci_cfg));
    jni_nfa_hci_cfg.num_whitelist_host =
        (uint8_t)num;  // number of HCI host ID's in the whitelist
    jni_nfa_hci_cfg.p_whitelist = deviceHostWhiteList;  // array of HCI host
                                                        // ID's
    p_nfa_hci_cfg = &jni_nfa_hci_cfg;
  }

  initializeGlobalAppLogLevel();

  verify_stack_non_volatile_store();
  if (GetNumValue(NAME_PRESERVE_STORAGE, (char*)&num, sizeof(num)) &&
      (num == 1))
    ALOGD("%s: preserve stack NV store", __func__);
  else {
    delete_stack_non_volatile_store(FALSE);
  }

  GKI_init();
  GKI_enable();
  GKI_create_task((TASKPTR)NFCA_TASK, BTU_TASK, (int8_t*)"NFCA_TASK", 0, 0,
                  (pthread_cond_t*)NULL, NULL);
  {
    AutoThreadMutex guard(mCondVar);
    GKI_create_task((TASKPTR)Thread, MMI_TASK, (int8_t*)"NFCA_THREAD", 0, 0,
                    (pthread_cond_t*)NULL, NULL);
    mCondVar.wait();
  }

  mHalCallback = NULL;
  memset(&mHalEntryFuncs, 0, sizeof(mHalEntryFuncs));
  InitializeHalDeviceContext();
  debug_nfcsnoop_init();
  ALOGD("%s: exit", func);
}

/*******************************************************************************
**
** Function:    NfcAdaptation::Finalize()
**
** Description: class finalizer
**
** Returns:     none
**
*******************************************************************************/
void NfcAdaptation::Finalize() {
  const char* func = "NfcAdaptation::Finalize";
  AutoThreadMutex a(sLock);

  ALOGD("%s: enter", func);
  GKI_shutdown();

  resetConfig();

  mCallback = NULL;
  memset(&mHalEntryFuncs, 0, sizeof(mHalEntryFuncs));

  ALOGD("%s: exit", func);
  delete this;
}

/*******************************************************************************
**
** Function:    NfcAdaptation::Dump
**
** Description: Native support for dumpsys function.
**
** Returns:     None.
**
*******************************************************************************/
void NfcAdaptation::Dump(int fd) { debug_nfcsnoop_dump(fd); }

/*******************************************************************************
**
** Function:    NfcAdaptation::signal()
**
** Description: signal the CondVar to release the thread that is waiting
**
** Returns:     none
**
*******************************************************************************/
void NfcAdaptation::signal() { mCondVar.signal(); }

/*******************************************************************************
**
** Function:    NfcAdaptation::NFCA_TASK()
**
** Description: NFCA_TASK runs the GKI main task
**
** Returns:     none
**
*******************************************************************************/
uint32_t NfcAdaptation::NFCA_TASK(uint32_t arg) {
  const char* func = "NfcAdaptation::NFCA_TASK";
  ALOGD("%s: enter", func);
  GKI_run(0);
  ALOGD("%s: exit", func);
  return 0;
}

/*******************************************************************************
**
** Function:    NfcAdaptation::Thread()
**
** Description: Creates work threads
**
** Returns:     none
**
*******************************************************************************/
uint32_t NfcAdaptation::Thread(uint32_t arg) {
  const char* func = "NfcAdaptation::Thread";
  ALOGD("%s: enter", func);

  {
    ThreadCondVar CondVar;
    AutoThreadMutex guard(CondVar);
    GKI_create_task((TASKPTR)nfc_task, NFC_TASK, (int8_t*)"NFC_TASK", 0, 0,
                    (pthread_cond_t*)CondVar, (pthread_mutex_t*)CondVar);
    CondVar.wait();
  }

  NfcAdaptation::GetInstance().signal();

  GKI_exit_task(GKI_get_taskid());
  ALOGD("%s: exit", func);
  return 0;
}

/*******************************************************************************
**
** Function:    NfcAdaptation::GetHalEntryFuncs()
**
** Description: Get the set of HAL entry points.
**
** Returns:     Functions pointers for HAL entry points.
**
*******************************************************************************/
tHAL_NFC_ENTRY* NfcAdaptation::GetHalEntryFuncs() { return &mHalEntryFuncs; }

/*******************************************************************************
**
** Function:    NfcAdaptation::InitializeHalDeviceContext
**
** Description: Ask the generic Android HAL to find the Broadcom-specific HAL.
**
** Returns:     None.
**
*******************************************************************************/
void NfcAdaptation::InitializeHalDeviceContext() {
  const char* func = "NfcAdaptation::InitializeHalDeviceContext";
  ALOGD("%s: enter", func);
  int ret = 0;  // 0 means success

  mHalEntryFuncs.initialize = HalInitialize;
  mHalEntryFuncs.terminate = HalTerminate;
  mHalEntryFuncs.open = HalOpen;
  mHalEntryFuncs.close = HalClose;
  mHalEntryFuncs.core_initialized = HalCoreInitialized;
  mHalEntryFuncs.write = HalWrite;
  mHalEntryFuncs.prediscover = HalPrediscover;
  mHalEntryFuncs.control_granted = HalControlGranted;
  mHalEntryFuncs.power_cycle = HalPowerCycle;
  mHalEntryFuncs.get_max_ee = HalGetMaxNfcee;
  ALOGI("%s: INfc::getService()", func);
  mHal = INfc::getService();
  LOG_FATAL_IF(mHal == nullptr, "Failed to retrieve the NFC HAL!");
  ALOGI("%s: INfc::getService() returned %p (%s)", func, mHal.get(),
        (mHal->isRemote() ? "remote" : "local"));
  ALOGD("%s: exit", func);
}

/*******************************************************************************
**
** Function:    NfcAdaptation::HalInitialize
**
** Description: Not implemented because this function is only needed
**              within the HAL.
**
** Returns:     None.
**
*******************************************************************************/
void NfcAdaptation::HalInitialize() {
  const char* func = "NfcAdaptation::HalInitialize";
  ALOGD("%s", func);
}

/*******************************************************************************
**
** Function:    NfcAdaptation::HalTerminate
**
** Description: Not implemented because this function is only needed
**              within the HAL.
**
** Returns:     None.
**
*******************************************************************************/
void NfcAdaptation::HalTerminate() {
  const char* func = "NfcAdaptation::HalTerminate";
  ALOGD("%s", func);
}

/*******************************************************************************
**
** Function:    NfcAdaptation::HalOpen
**
** Description: Turn on controller, download firmware.
**
** Returns:     None.
**
*******************************************************************************/
void NfcAdaptation::HalOpen(tHAL_NFC_CBACK* p_hal_cback,
                            tHAL_NFC_DATA_CBACK* p_data_cback) {
  const char* func = "NfcAdaptation::HalOpen";
  ALOGD("%s", func);
  mCallback = new NfcClientCallback(p_hal_cback, p_data_cback);
  mHal->open(mCallback);
}

/*******************************************************************************
**
** Function:    NfcAdaptation::HalClose
**
** Description: Turn off controller.
**
** Returns:     None.
**
*******************************************************************************/
void NfcAdaptation::HalClose() {
  const char* func = "NfcAdaptation::HalClose";
  ALOGD("%s", func);
  mHal->close();
}

/*******************************************************************************
**
** Function:    NfcAdaptation::HalDeviceContextCallback
**
** Description: Translate generic Android HAL's callback into Broadcom-specific
**              callback function.
**
** Returns:     None.
**
*******************************************************************************/
void NfcAdaptation::HalDeviceContextCallback(nfc_event_t event,
                                             nfc_status_t event_status) {
  const char* func = "NfcAdaptation::HalDeviceContextCallback";
  ALOGD("%s: event=%u", func, event);
  if (mHalCallback) mHalCallback(event, (tHAL_NFC_STATUS)event_status);
}

/*******************************************************************************
**
** Function:    NfcAdaptation::HalDeviceContextDataCallback
**
** Description: Translate generic Android HAL's callback into Broadcom-specific
**              callback function.
**
** Returns:     None.
**
*******************************************************************************/
void NfcAdaptation::HalDeviceContextDataCallback(uint16_t data_len,
                                                 uint8_t* p_data) {
  const char* func = "NfcAdaptation::HalDeviceContextDataCallback";
  ALOGD("%s: len=%u", func, data_len);
  if (mHalDataCallback) mHalDataCallback(data_len, p_data);
}

/*******************************************************************************
**
** Function:    NfcAdaptation::HalWrite
**
** Description: Write NCI message to the controller.
**
** Returns:     None.
**
*******************************************************************************/
void NfcAdaptation::HalWrite(uint16_t data_len, uint8_t* p_data) {
  const char* func = "NfcAdaptation::HalWrite";
  ALOGD("%s", func);
  ::android::hardware::nfc::V1_0::NfcData data;
  data.setToExternal(p_data, data_len);
  mHal->write(data);
}

/*******************************************************************************
**
** Function:    NfcAdaptation::HalCoreInitialized
**
** Description: Adjust the configurable parameters in the controller.
**
** Returns:     None.
**
*******************************************************************************/
void NfcAdaptation::HalCoreInitialized(uint16_t data_len,
                                       uint8_t* p_core_init_rsp_params) {
  const char* func = "NfcAdaptation::HalCoreInitialized";
  ALOGD("%s", func);
  hidl_vec<uint8_t> data;
  data.setToExternal(p_core_init_rsp_params, data_len);

  mHal->coreInitialized(data);
}

/*******************************************************************************
**
** Function:    NfcAdaptation::HalPrediscover
**
** Description:     Perform any vendor-specific pre-discovery actions (if
**                  needed) If any actions were performed TRUE will be returned,
**                  and HAL_PRE_DISCOVER_CPLT_EVT will notify when actions are
**                  completed.
**
** Returns:         TRUE if vendor-specific pre-discovery actions initialized
**                  FALSE if no vendor-specific pre-discovery actions are
**                  needed.
**
*******************************************************************************/
bool NfcAdaptation::HalPrediscover() {
  const char* func = "NfcAdaptation::HalPrediscover";
  ALOGD("%s", func);
  bool retval = FALSE;
  mHal->prediscover();
  return retval;
}

/*******************************************************************************
**
** Function:        HAL_NfcControlGranted
**
** Description:     Grant control to HAL control for sending NCI commands.
**                  Call in response to HAL_REQUEST_CONTROL_EVT.
**                  Must only be called when there are no NCI commands pending.
**                  HAL_RELEASE_CONTROL_EVT will notify when HAL no longer
**                  needs control of NCI.
**
** Returns:         void
**
*******************************************************************************/
void NfcAdaptation::HalControlGranted() {
  const char* func = "NfcAdaptation::HalControlGranted";
  ALOGD("%s", func);
  mHal->controlGranted();
}

/*******************************************************************************
**
** Function:    NfcAdaptation::HalPowerCycle
**
** Description: Turn off and turn on the controller.
**
** Returns:     None.
**
*******************************************************************************/
void NfcAdaptation::HalPowerCycle() {
  const char* func = "NfcAdaptation::HalPowerCycle";
  ALOGD("%s", func);
  mHal->powerCycle();
}

/*******************************************************************************
**
** Function:    NfcAdaptation::HalGetMaxNfcee
**
** Description: Turn off and turn on the controller.
**
** Returns:     None.
**
*******************************************************************************/
uint8_t NfcAdaptation::HalGetMaxNfcee() {
  const char* func = "NfcAdaptation::HalPowerCycle";
  uint8_t maxNfcee = 0;
  ALOGD("%s", func);

  return nfa_ee_max_ee_cfg;
}

/*******************************************************************************
**
** Function:    NfcAdaptation::DownloadFirmware
**
** Description: Download firmware patch files.
**
** Returns:     None.
**
*******************************************************************************/
void NfcAdaptation::DownloadFirmware() {
  const char* func = "NfcAdaptation::DownloadFirmware";
  ALOGD("%s: enter", func);
  HalInitialize();

  mHalOpenCompletedEvent.lock();
  ALOGD("%s: try open HAL", func);
  HalOpen(HalDownloadFirmwareCallback, HalDownloadFirmwareDataCallback);
  mHalOpenCompletedEvent.wait();

  mHalCloseCompletedEvent.lock();
  ALOGD("%s: try close HAL", func);
  HalClose();
  mHalCloseCompletedEvent.wait();

  HalTerminate();
  ALOGD("%s: exit", func);
}

/*******************************************************************************
**
** Function:    NfcAdaptation::HalDownloadFirmwareCallback
**
** Description: Receive events from the HAL.
**
** Returns:     None.
**
*******************************************************************************/
void NfcAdaptation::HalDownloadFirmwareCallback(nfc_event_t event,
                                                nfc_status_t event_status) {
  const char* func = "NfcAdaptation::HalDownloadFirmwareCallback";
  ALOGD("%s: event=0x%X", func, event);
  switch (event) {
    case HAL_NFC_OPEN_CPLT_EVT: {
      ALOGD("%s: HAL_NFC_OPEN_CPLT_EVT", func);
      mHalOpenCompletedEvent.signal();
      break;
    }
    case HAL_NFC_CLOSE_CPLT_EVT: {
      ALOGD("%s: HAL_NFC_CLOSE_CPLT_EVT", func);
      mHalCloseCompletedEvent.signal();
      break;
    }
  }
}

/*******************************************************************************
**
** Function:    NfcAdaptation::HalDownloadFirmwareDataCallback
**
** Description: Receive data events from the HAL.
**
** Returns:     None.
**
*******************************************************************************/
void NfcAdaptation::HalDownloadFirmwareDataCallback(uint16_t data_len,
                                                    uint8_t* p_data) {}

/*******************************************************************************
**
** Function:    ThreadMutex::ThreadMutex()
**
** Description: class constructor
**
** Returns:     none
**
*******************************************************************************/
ThreadMutex::ThreadMutex() {
  pthread_mutexattr_t mutexAttr;

  pthread_mutexattr_init(&mutexAttr);
  pthread_mutex_init(&mMutex, &mutexAttr);
  pthread_mutexattr_destroy(&mutexAttr);
}

/*******************************************************************************
**
** Function:    ThreadMutex::~ThreadMutex()
**
** Description: class destructor
**
** Returns:     none
**
*******************************************************************************/
ThreadMutex::~ThreadMutex() { pthread_mutex_destroy(&mMutex); }

/*******************************************************************************
**
** Function:    ThreadMutex::lock()
**
** Description: lock kthe mutex
**
** Returns:     none
**
*******************************************************************************/
void ThreadMutex::lock() { pthread_mutex_lock(&mMutex); }

/*******************************************************************************
**
** Function:    ThreadMutex::unblock()
**
** Description: unlock the mutex
**
** Returns:     none
**
*******************************************************************************/
void ThreadMutex::unlock() { pthread_mutex_unlock(&mMutex); }

/*******************************************************************************
**
** Function:    ThreadCondVar::ThreadCondVar()
**
** Description: class constructor
**
** Returns:     none
**
*******************************************************************************/
ThreadCondVar::ThreadCondVar() {
  pthread_condattr_t CondAttr;

  pthread_condattr_init(&CondAttr);
  pthread_cond_init(&mCondVar, &CondAttr);

  pthread_condattr_destroy(&CondAttr);
}

/*******************************************************************************
**
** Function:    ThreadCondVar::~ThreadCondVar()
**
** Description: class destructor
**
** Returns:     none
**
*******************************************************************************/
ThreadCondVar::~ThreadCondVar() { pthread_cond_destroy(&mCondVar); }

/*******************************************************************************
**
** Function:    ThreadCondVar::wait()
**
** Description: wait on the mCondVar
**
** Returns:     none
**
*******************************************************************************/
void ThreadCondVar::wait() {
  pthread_cond_wait(&mCondVar, *this);
  pthread_mutex_unlock(*this);
}

/*******************************************************************************
**
** Function:    ThreadCondVar::signal()
**
** Description: signal the mCondVar
**
** Returns:     none
**
*******************************************************************************/
void ThreadCondVar::signal() {
  AutoThreadMutex a(*this);
  pthread_cond_signal(&mCondVar);
}

/*******************************************************************************
**
** Function:    AutoThreadMutex::AutoThreadMutex()
**
** Description: class constructor, automatically lock the mutex
**
** Returns:     none
**
*******************************************************************************/
AutoThreadMutex::AutoThreadMutex(ThreadMutex& m) : mm(m) { mm.lock(); }

/*******************************************************************************
**
** Function:    AutoThreadMutex::~AutoThreadMutex()
**
** Description: class destructor, automatically unlock the mutex
**
** Returns:     none
**
*******************************************************************************/
AutoThreadMutex::~AutoThreadMutex() { mm.unlock(); }