aboutsummaryrefslogtreecommitdiffstats
path: root/src
diff options
context:
space:
mode:
Diffstat (limited to 'src')
-rw-r--r--src/drivers/driver.h7
-rw-r--r--src/drivers/driver_nl80211.c1
-rw-r--r--src/drivers/driver_nl80211.h1
-rw-r--r--src/drivers/driver_nl80211_scan.c20
-rw-r--r--src/drivers/nl80211_copy.h97
5 files changed, 111 insertions, 15 deletions
diff --git a/src/drivers/driver.h b/src/drivers/driver.h
index 7fe736bb..f9847839 100644
--- a/src/drivers/driver.h
+++ b/src/drivers/driver.h
@@ -3394,6 +3394,13 @@ struct wpa_driver_ops {
* Returns 0 on success, -1 on failure
*/
int (*set_band)(void *priv, enum set_band band);
+
+ /**
+ * abort_scan - Request the driver to abort an ongoing scan
+ * @priv: Private driver interface data
+ * Returns 0 on success, -1 on failure
+ */
+ int (*abort_scan)(void *priv);
};
diff --git a/src/drivers/driver_nl80211.c b/src/drivers/driver_nl80211.c
index 6cd36c04..55028868 100644
--- a/src/drivers/driver_nl80211.c
+++ b/src/drivers/driver_nl80211.c
@@ -8531,6 +8531,7 @@ const struct wpa_driver_ops wpa_driver_nl80211_ops = {
.sched_scan = wpa_driver_nl80211_sched_scan,
.stop_sched_scan = wpa_driver_nl80211_stop_sched_scan,
.get_scan_results2 = wpa_driver_nl80211_get_scan_results,
+ .abort_scan = wpa_driver_nl80211_abort_scan,
.deauthenticate = driver_nl80211_deauthenticate,
.authenticate = driver_nl80211_authenticate,
.associate = wpa_driver_nl80211_associate,
diff --git a/src/drivers/driver_nl80211.h b/src/drivers/driver_nl80211.h
index ffb5fa7e..5e88a82d 100644
--- a/src/drivers/driver_nl80211.h
+++ b/src/drivers/driver_nl80211.h
@@ -273,6 +273,7 @@ int wpa_driver_nl80211_sched_scan(void *priv,
int wpa_driver_nl80211_stop_sched_scan(void *priv);
struct wpa_scan_results * wpa_driver_nl80211_get_scan_results(void *priv);
void nl80211_dump_scan(struct wpa_driver_nl80211_data *drv);
+int wpa_driver_nl80211_abort_scan(void *priv);
const u8 * nl80211_get_ie(const u8 *ies, size_t ies_len, u8 ie);
#endif /* DRIVER_NL80211_H */
diff --git a/src/drivers/driver_nl80211_scan.c b/src/drivers/driver_nl80211_scan.c
index f3d45e58..1c79f763 100644
--- a/src/drivers/driver_nl80211_scan.c
+++ b/src/drivers/driver_nl80211_scan.c
@@ -778,3 +778,23 @@ void nl80211_dump_scan(struct wpa_driver_nl80211_data *drv)
wpa_scan_results_free(res);
}
+
+
+int wpa_driver_nl80211_abort_scan(void *priv)
+{
+ struct i802_bss *bss = priv;
+ struct wpa_driver_nl80211_data *drv = bss->drv;
+ int ret;
+ struct nl_msg *msg;
+
+ wpa_printf(MSG_DEBUG, "nl80211: Abort scan");
+ msg = nl80211_cmd_msg(bss, 0, NL80211_CMD_ABORT_SCAN);
+ ret = send_and_recv_msgs(drv, msg, NULL, NULL);
+ if (ret) {
+ wpa_printf(MSG_DEBUG, "nl80211: Abort scan failed: ret=%d (%s)",
+ ret, strerror(-ret));
+ }
+
+ return ret;
+}
+
diff --git a/src/drivers/nl80211_copy.h b/src/drivers/nl80211_copy.h
index ae16ba9c..5b7b5ebe 100644
--- a/src/drivers/nl80211_copy.h
+++ b/src/drivers/nl80211_copy.h
@@ -10,6 +10,7 @@
* Copyright 2008, 2009 Luis R. Rodriguez <lrodriguez@atheros.com>
* Copyright 2008 Jouni Malinen <jouni.malinen@atheros.com>
* Copyright 2008 Colin McCabe <colin@cozybit.com>
+ * Copyright 2015 Intel Deutschland GmbH
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
@@ -328,7 +329,15 @@
* partial scan results may be available
*
* @NL80211_CMD_START_SCHED_SCAN: start a scheduled scan at certain
- * intervals, as specified by %NL80211_ATTR_SCHED_SCAN_INTERVAL.
+ * intervals and certain number of cycles, as specified by
+ * %NL80211_ATTR_SCHED_SCAN_PLANS. If %NL80211_ATTR_SCHED_SCAN_PLANS is
+ * not specified and only %NL80211_ATTR_SCHED_SCAN_INTERVAL is specified,
+ * scheduled scan will run in an infinite loop with the specified interval.
+ * These attributes are mutually exculsive,
+ * i.e. NL80211_ATTR_SCHED_SCAN_INTERVAL must not be passed if
+ * NL80211_ATTR_SCHED_SCAN_PLANS is defined.
+ * If for some reason scheduled scan is aborted by the driver, all scan
+ * plans are canceled (including scan plans that did not start yet).
* Like with normal scans, if SSIDs (%NL80211_ATTR_SCAN_SSIDS)
* are passed, they are used in the probe requests. For
* broadcast, a broadcast SSID must be passed (ie. an empty
@@ -811,6 +820,10 @@
* as an event to indicate changes for devices with wiphy-specific regdom
* management.
*
+ * @NL80211_CMD_ABORT_SCAN: Stop an ongoing scan. Returns -ENOENT if a scan is
+ * not running. The driver indicates the status of the scan through
+ * cfg80211_scan_done().
+ *
* @NL80211_CMD_MAX: highest used command number
* @__NL80211_CMD_AFTER_LAST: internal use
*/
@@ -997,6 +1010,8 @@ enum nl80211_commands {
NL80211_CMD_WIPHY_REG_CHANGE,
+ NL80211_CMD_ABORT_SCAN,
+
/* add new commands above here */
/* used to define NL80211_CMD_MAX below */
@@ -1754,12 +1769,27 @@ enum nl80211_commands {
* should be contained in the result as the sum of the respective counters
* over all channels.
*
- * @NL80211_ATTR_SCHED_SCAN_DELAY: delay before a scheduled scan (or a
- * WoWLAN net-detect scan) is started, u32 in seconds.
+ * @NL80211_ATTR_SCHED_SCAN_DELAY: delay before the first cycle of a
+ * scheduled scan is started. Or the delay before a WoWLAN
+ * net-detect scan is started, counting from the moment the
+ * system is suspended. This value is a u32, in seconds.
* @NL80211_ATTR_REG_INDOOR: flag attribute, if set indicates that the device
* is operating in an indoor environment.
*
+ * @NL80211_ATTR_MAX_NUM_SCHED_SCAN_PLANS: maximum number of scan plans for
+ * scheduled scan supported by the device (u32), a wiphy attribute.
+ * @NL80211_ATTR_MAX_SCAN_PLAN_INTERVAL: maximum interval (in seconds) for
+ * a scan plan (u32), a wiphy attribute.
+ * @NL80211_ATTR_MAX_SCAN_PLAN_ITERATIONS: maximum number of iterations in
+ * a scan plan (u32), a wiphy attribute.
+ * @NL80211_ATTR_SCHED_SCAN_PLANS: a list of scan plans for scheduled scan.
+ * Each scan plan defines the number of scan iterations and the interval
+ * between scans. The last scan plan will always run infinitely,
+ * thus it must not specify the number of iterations, only the interval
+ * between scans. The scan plans are executed sequentially.
+ * Each scan plan is a nested attribute of &enum nl80211_sched_scan_plan.
+ *
* @NUM_NL80211_ATTR: total number of nl80211_attrs available
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
@@ -2129,6 +2159,11 @@ enum nl80211_attrs {
NL80211_ATTR_REG_INDOOR,
+ NL80211_ATTR_MAX_NUM_SCHED_SCAN_PLANS,
+ NL80211_ATTR_MAX_SCAN_PLAN_INTERVAL,
+ NL80211_ATTR_MAX_SCAN_PLAN_ITERATIONS,
+ NL80211_ATTR_SCHED_SCAN_PLANS,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
@@ -2619,16 +2654,17 @@ enum nl80211_band_attr {
* an indoor surroundings, i.e., it is connected to AC power (and not
* through portable DC inverters) or is under the control of a master
* that is acting as an AP and is connected to AC power.
- * @NL80211_FREQUENCY_ATTR_GO_CONCURRENT: GO operation is allowed on this
+ * @NL80211_FREQUENCY_ATTR_IR_CONCURRENT: IR operation is allowed on this
* channel if it's connected concurrently to a BSS on the same channel on
* the 2 GHz band or to a channel in the same UNII band (on the 5 GHz
- * band), and IEEE80211_CHAN_RADAR is not set. Instantiating a GO on a
- * channel that has the GO_CONCURRENT attribute set can be done when there
- * is a clear assessment that the device is operating under the guidance of
- * an authorized master, i.e., setting up a GO while the device is also
- * connected to an AP with DFS and radar detection on the UNII band (it is
- * up to user-space, i.e., wpa_supplicant to perform the required
- * verifications)
+ * band), and IEEE80211_CHAN_RADAR is not set. Instantiating a GO or TDLS
+ * off-channel on a channel that has the IR_CONCURRENT attribute set can be
+ * done when there is a clear assessment that the device is operating under
+ * the guidance of an authorized master, i.e., setting up a GO or TDLS
+ * off-channel while the device is also connected to an AP with DFS and
+ * radar detection on the UNII band (it is up to user-space, i.e.,
+ * wpa_supplicant to perform the required verifications). Using this
+ * attribute for IR is disallowed for master interfaces (IBSS, AP).
* @NL80211_FREQUENCY_ATTR_NO_20MHZ: 20 MHz operation is not allowed
* on this channel in current regulatory domain.
* @NL80211_FREQUENCY_ATTR_NO_10MHZ: 10 MHz operation is not allowed
@@ -2640,7 +2676,7 @@ enum nl80211_band_attr {
* See https://apps.fcc.gov/eas/comments/GetPublishedDocument.html?id=327&tn=528122
* for more information on the FCC description of the relaxations allowed
* by NL80211_FREQUENCY_ATTR_INDOOR_ONLY and
- * NL80211_FREQUENCY_ATTR_GO_CONCURRENT.
+ * NL80211_FREQUENCY_ATTR_IR_CONCURRENT.
*/
enum nl80211_frequency_attr {
__NL80211_FREQUENCY_ATTR_INVALID,
@@ -2658,7 +2694,7 @@ enum nl80211_frequency_attr {
NL80211_FREQUENCY_ATTR_NO_160MHZ,
NL80211_FREQUENCY_ATTR_DFS_CAC_TIME,
NL80211_FREQUENCY_ATTR_INDOOR_ONLY,
- NL80211_FREQUENCY_ATTR_GO_CONCURRENT,
+ NL80211_FREQUENCY_ATTR_IR_CONCURRENT,
NL80211_FREQUENCY_ATTR_NO_20MHZ,
NL80211_FREQUENCY_ATTR_NO_10MHZ,
@@ -2671,6 +2707,8 @@ enum nl80211_frequency_attr {
#define NL80211_FREQUENCY_ATTR_PASSIVE_SCAN NL80211_FREQUENCY_ATTR_NO_IR
#define NL80211_FREQUENCY_ATTR_NO_IBSS NL80211_FREQUENCY_ATTR_NO_IR
#define NL80211_FREQUENCY_ATTR_NO_IR NL80211_FREQUENCY_ATTR_NO_IR
+#define NL80211_FREQUENCY_ATTR_GO_CONCURRENT \
+ NL80211_FREQUENCY_ATTR_IR_CONCURRENT
/**
* enum nl80211_bitrate_attr - bitrate attributes
@@ -2829,7 +2867,7 @@ enum nl80211_sched_scan_match_attr {
* @NL80211_RRF_AUTO_BW: maximum available bandwidth should be calculated
* base on contiguous rules and wider channels will be allowed to cross
* multiple contiguous/overlapping frequency ranges.
- * @NL80211_RRF_GO_CONCURRENT: See &NL80211_FREQUENCY_ATTR_GO_CONCURRENT
+ * @NL80211_RRF_IR_CONCURRENT: See &NL80211_FREQUENCY_ATTR_IR_CONCURRENT
* @NL80211_RRF_NO_HT40MINUS: channels can't be used in HT40- operation
* @NL80211_RRF_NO_HT40PLUS: channels can't be used in HT40+ operation
* @NL80211_RRF_NO_80MHZ: 80MHz operation not allowed
@@ -2846,7 +2884,7 @@ enum nl80211_reg_rule_flags {
NL80211_RRF_NO_IR = 1<<7,
__NL80211_RRF_NO_IBSS = 1<<8,
NL80211_RRF_AUTO_BW = 1<<11,
- NL80211_RRF_GO_CONCURRENT = 1<<12,
+ NL80211_RRF_IR_CONCURRENT = 1<<12,
NL80211_RRF_NO_HT40MINUS = 1<<13,
NL80211_RRF_NO_HT40PLUS = 1<<14,
NL80211_RRF_NO_80MHZ = 1<<15,
@@ -2858,6 +2896,7 @@ enum nl80211_reg_rule_flags {
#define NL80211_RRF_NO_IR NL80211_RRF_NO_IR
#define NL80211_RRF_NO_HT40 (NL80211_RRF_NO_HT40MINUS |\
NL80211_RRF_NO_HT40PLUS)
+#define NL80211_RRF_GO_CONCURRENT NL80211_RRF_IR_CONCURRENT
/* For backport compatibility with older userspace */
#define NL80211_RRF_NO_IR_ALL (NL80211_RRF_NO_IR | __NL80211_RRF_NO_IBSS)
@@ -3359,6 +3398,9 @@ enum nl80211_bss_scan_width {
* (not present if no beacon frame has been received yet)
* @NL80211_BSS_PRESP_DATA: the data in @NL80211_BSS_INFORMATION_ELEMENTS and
* @NL80211_BSS_TSF is known to be from a probe response (flag attribute)
+ * @NL80211_BSS_LAST_SEEN_BOOTTIME: CLOCK_BOOTTIME timestamp when this entry
+ * was last updated by a received frame. The value is expected to be
+ * accurate to about 10ms. (u64, nanoseconds)
* @__NL80211_BSS_AFTER_LAST: internal
* @NL80211_BSS_MAX: highest BSS attribute
*/
@@ -3378,6 +3420,7 @@ enum nl80211_bss {
NL80211_BSS_CHAN_WIDTH,
NL80211_BSS_BEACON_TSF,
NL80211_BSS_PRESP_DATA,
+ NL80211_BSS_LAST_SEEN_BOOTTIME,
/* keep last */
__NL80211_BSS_AFTER_LAST,
@@ -4584,4 +4627,28 @@ enum nl80211_tdls_peer_capability {
NL80211_TDLS_PEER_WMM = 1<<2,
};
+/**
+ * enum nl80211_sched_scan_plan - scanning plan for scheduled scan
+ * @__NL80211_SCHED_SCAN_PLAN_INVALID: attribute number 0 is reserved
+ * @NL80211_SCHED_SCAN_PLAN_INTERVAL: interval between scan iterations. In
+ * seconds (u32).
+ * @NL80211_SCHED_SCAN_PLAN_ITERATIONS: number of scan iterations in this
+ * scan plan (u32). The last scan plan must not specify this attribute
+ * because it will run infinitely. A value of zero is invalid as it will
+ * make the scan plan meaningless.
+ * @NL80211_SCHED_SCAN_PLAN_MAX: highest scheduled scan plan attribute number
+ * currently defined
+ * @__NL80211_SCHED_SCAN_PLAN_AFTER_LAST: internal use
+ */
+enum nl80211_sched_scan_plan {
+ __NL80211_SCHED_SCAN_PLAN_INVALID,
+ NL80211_SCHED_SCAN_PLAN_INTERVAL,
+ NL80211_SCHED_SCAN_PLAN_ITERATIONS,
+
+ /* keep last */
+ __NL80211_SCHED_SCAN_PLAN_AFTER_LAST,
+ NL80211_SCHED_SCAN_PLAN_MAX =
+ __NL80211_SCHED_SCAN_PLAN_AFTER_LAST - 1
+};
+
#endif /* __LINUX_NL80211_H */
generated by cgit v1.2.3 (git 2.25.1) at 2026-05-31 10:53:15 +0000